Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 287

Last change on this file since 287 was 274, checked in by heinze, 16 years ago
Indentation of the message calls corrected
Property svn:keywords set to `Id`
File size: 29.7 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[1]	5	! -----------------
[257]	6	! Output of messages replaced by message handling routine.
[240]	7	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	8	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
[256]	9	! dp_smooth, dpdxy, topography_grid_convention, u_bulk, v_bulk
[198]	10	!
	11	! Former revisions:
	12	! -----------------
	13	! $Id: read_var_list.f90 274 2009-03-26 15:11:21Z raasch $
	14	!
[226]	15	! 216 2008-11-25 07:12:43Z raasch
	16	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	17	!
[198]	18	! 173 2008-05-23 20:39:38Z raasch
[153]	19	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	20	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	21	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	22	! recycling_width, turbulent_inflow,
[145]	23	! -cross_ts_*, npex, npey,
	24	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	25	! read_3d_binary to here,
[147]	26	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	27	!
[139]	28	! 138 2007-11-28 10:03:58Z letzel
	29	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	30	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	31	! plant_canopy, time_sort_particles
	32	!
[110]	33	! 102 2007-07-27 09:09:17Z raasch
	34	! +time_coupling, top_momentumflux_u\|v
	35	!
[98]	36	! 95 2007-06-02 16:48:38Z raasch
	37	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	38	! sa_vertical_gradient_level, bottom/top_salinity_flux
	39	!
[90]	40	! 87 2007-05-22 15:46:47Z raasch
	41	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	42	!
[77]	43	! 75 2007-03-22 09:54:05Z raasch
	44	! +loop_optimization, pt_reference, moisture renamed humidity
	45	!
[39]	46	! 20 2007-02-26 00:12:32Z raasch
	47	! +top_heatflux, use_top_fluxes
	48	!
[3]	49	! RCS Log replace by Id keyword, revision history cleaned up
	50	!
[1]	51	! Revision 1.34 2006/08/22 14:14:27 raasch
	52	! +dz_max
	53	!
	54	! Revision 1.1 1998/03/18 20:18:48 raasch
	55	! Initial revision
	56	!
	57	!
	58	! Description:
	59	! ------------
[143]	60	! Reading values of global control variables from restart-file (binary format)
[1]	61	!------------------------------------------------------------------------------!
	62
	63	USE arrays_3d
	64	USE averaging
[87]	65	USE control_parameters
[1]	66	USE grid_variables
	67	USE indices
	68	USE model_1d
[116]	69	USE particle_attributes
[1]	70	USE pegrid
	71	USE profil_parameter
	72	USE statistics
	73
	74	IMPLICIT NONE
	75
	76	CHARACTER (LEN=10) :: binary_version, version_on_file
	77	CHARACTER (LEN=30) :: variable_chr
[87]	78
[143]	79
[1]	80	CALL check_open( 13 )
	81
	82	!
	83	!-- Make version number check first
	84	READ ( 13 ) version_on_file
[241]	85	binary_version = '3.4'
[1]	86	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	87	WRITE( message_string, * ) 'version mismatch concerning control ', &
	88	'variables', &
	89	'&version on file = "', &
	90	TRIM( version_on_file ), '"', &
	91	'&version on program = "', &
	92	TRIM( binary_version ), '"'
	93	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	94	ENDIF
	95
	96	!
[145]	97	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	98	!-- run
	99	READ ( 13 ) variable_chr
	100	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	101	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	102	'run on PE ', myid
[257]	103	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	104	ENDIF
	105	READ ( 13 ) numprocs_previous_run
	106
[146]	107	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	108	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	109	ENDIF
[145]	110
	111	READ ( 13 ) variable_chr
	112	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	113	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	114	'prior run on PE ', myid
	115	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	116	ENDIF
	117	READ ( 13 ) hor_index_bounds_previous_run
	118
	119	!
[1]	120	!-- Read vertical number of gridpoints and number of different areas used
	121	!-- for computing statistics. Allocate arrays depending on these values,
	122	!-- which are needed for the following read instructions.
	123	READ ( 13 ) variable_chr
	124	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	125	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	126	myid
	127	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	128	ENDIF
	129	READ ( 13 ) nz
[87]	130
[1]	131	READ ( 13 ) variable_chr
[87]	132	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	133	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	134	'prior run on PE ', myid
[257]	135	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	136	ENDIF
[159]	137	READ ( 13 ) max_pr_user ! This value is checked against the number of
	138	! user profiles given for the current run
	139	! in routine user_parin (it has to match)
[87]	140
	141	READ ( 13 ) variable_chr
[1]	142	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	143	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	144	'prior run on PE ', myid
[257]	145	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	146	ENDIF
	147	READ ( 13 ) statistic_regions
[146]	148	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	149	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	150	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	151	sa_init(0:nz+1), &
[146]	152	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	153	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	154	ENDIF
[1]	155
	156	!
	157	!-- Now read all control parameters:
	158	!-- Caution: When the following read instructions have been changed, the
	159	!-- ------- version number stored in the variable binary_version has to be
	160	!-- increased. The same changes must also be done in write_var_list.
	161	READ ( 13 ) variable_chr
	162	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	163
	164	SELECT CASE ( TRIM( variable_chr ) )
	165
	166	CASE ( 'adjust_mixing_length' )
	167	READ ( 13 ) adjust_mixing_length
	168	CASE ( 'advected_distance_x' )
	169	READ ( 13 ) advected_distance_x
	170	CASE ( 'advected_distance_y' )
	171	READ ( 13 ) advected_distance_y
	172	CASE ( 'alpha_surface' )
	173	READ ( 13 ) alpha_surface
	174	CASE ( 'average_count_pr' )
	175	READ ( 13 ) average_count_pr
	176	CASE ( 'average_count_sp' )
	177	READ ( 13 ) average_count_sp
	178	CASE ( 'average_count_3d' )
	179	READ ( 13 ) average_count_3d
	180	CASE ( 'bc_e_b' )
	181	READ ( 13 ) bc_e_b
	182	CASE ( 'bc_lr' )
	183	READ ( 13 ) bc_lr
	184	CASE ( 'bc_ns' )
	185	READ ( 13 ) bc_ns
	186	CASE ( 'bc_p_b' )
	187	READ ( 13 ) bc_p_b
	188	CASE ( 'bc_p_t' )
	189	READ ( 13 ) bc_p_t
	190	CASE ( 'bc_pt_b' )
	191	READ ( 13 ) bc_pt_b
	192	CASE ( 'bc_pt_t' )
	193	READ ( 13 ) bc_pt_t
	194	CASE ( 'bc_pt_t_val' )
	195	READ ( 13 ) bc_pt_t_val
	196	CASE ( 'bc_q_b' )
	197	READ ( 13 ) bc_q_b
	198	CASE ( 'bc_q_t' )
	199	READ ( 13 ) bc_q_t
	200	CASE ( 'bc_q_t_val' )
	201	READ ( 13 ) bc_q_t_val
	202	CASE ( 'bc_s_b' )
	203	READ ( 13 ) bc_s_b
	204	CASE ( 'bc_s_t' )
	205	READ ( 13 ) bc_s_t
[95]	206	CASE ( 'bc_sa_t' )
	207	READ ( 13 ) bc_sa_t
[1]	208	CASE ( 'bc_uv_b' )
	209	READ ( 13 ) bc_uv_b
	210	CASE ( 'bc_uv_t' )
	211	READ ( 13 ) bc_uv_t
[95]	212	CASE ( 'bottom_salinityflux' )
	213	READ ( 13 ) bottom_salinityflux
[1]	214	CASE ( 'building_height' )
	215	READ ( 13 ) building_height
	216	CASE ( 'building_length_x' )
	217	READ ( 13 ) building_length_x
	218	CASE ( 'building_length_y' )
	219	READ ( 13 ) building_length_y
	220	CASE ( 'building_wall_left' )
	221	READ ( 13 ) building_wall_left
	222	CASE ( 'building_wall_south' )
	223	READ ( 13 ) building_wall_south
[138]	224	CASE ( 'canopy_mode' )
	225	READ ( 13 ) canopy_mode
[240]	226	CASE ( 'canyon_height' )
	227	READ ( 13 ) canyon_height
	228	CASE ( 'canyon_width_x' )
	229	READ ( 13 ) canyon_width_x
	230	CASE ( 'canyon_width_y' )
	231	READ ( 13 ) canyon_width_y
	232	CASE ( 'canyon_wall_left' )
	233	READ ( 13 ) canyon_wall_left
	234	CASE ( 'canyon_wall_south' )
	235	READ ( 13 ) canyon_wall_south
[1]	236	CASE ( 'cloud_droplets' )
	237	READ ( 13 ) cloud_droplets
	238	CASE ( 'cloud_physics' )
	239	READ ( 13 ) cloud_physics
	240	CASE ( 'conserve_volume_flow' )
	241	READ ( 13 ) conserve_volume_flow
[241]	242	CASE ( 'conserve_volume_flow_mode' )
	243	READ ( 13 ) conserve_volume_flow_mode
[153]	244	CASE ( 'cthf' )
	245	READ ( 13 ) cthf
[1]	246	CASE ( 'current_timestep_number' )
	247	READ ( 13 ) current_timestep_number
	248	CASE ( 'cut_spline_overshoot' )
	249	READ ( 13 ) cut_spline_overshoot
	250	CASE ( 'damp_level_1d' )
	251	READ ( 13 ) damp_level_1d
	252	CASE ( 'dissipation_1d' )
	253	READ ( 13 ) dissipation_1d
[240]	254	CASE ( 'dp_external' )
	255	READ ( 13 ) dp_external
	256	CASE ( 'dp_level_b' )
	257	READ ( 13 ) dp_level_b
	258	CASE ( 'dp_smooth' )
	259	READ ( 13 ) dp_smooth
	260	CASE ( 'dpdxy' )
	261	READ ( 13 ) dpdxy
[138]	262	CASE ( 'drag_coefficient' )
	263	READ ( 13 ) drag_coefficient
[1]	264	CASE ( 'dt_fixed' )
	265	READ ( 13 ) dt_fixed
	266	CASE ( 'dt_pr_1d' )
	267	READ ( 13 ) dt_pr_1d
	268	CASE ( 'dt_run_control_1d' )
	269	READ ( 13 ) dt_run_control_1d
	270	CASE ( 'dt_3d' )
	271	READ ( 13 ) dt_3d
	272	CASE ( 'dvrp_filecount' )
	273	READ ( 13 ) dvrp_filecount
	274	CASE ( 'dx' )
	275	READ ( 13 ) dx
	276	CASE ( 'dy' )
	277	READ ( 13 ) dy
	278	CASE ( 'dz' )
	279	READ ( 13 ) dz
	280	CASE ( 'dz_max' )
	281	READ ( 13 ) dz_max
	282	CASE ( 'dz_stretch_factor' )
	283	READ ( 13 ) dz_stretch_factor
	284	CASE ( 'dz_stretch_level' )
	285	READ ( 13 ) dz_stretch_level
	286	CASE ( 'e_min' )
	287	READ ( 13 ) e_min
	288	CASE ( 'end_time_1d' )
	289	READ ( 13 ) end_time_1d
	290	CASE ( 'fft_method' )
	291	READ ( 13 ) fft_method
	292	CASE ( 'first_call_advec_particles' )
	293	READ ( 13 ) first_call_advec_particles
	294	CASE ( 'galilei_transformation' )
	295	READ ( 13 ) galilei_transformation
	296	CASE ( 'grid_matching' )
	297	READ ( 13 ) grid_matching
	298	CASE ( 'hom' )
	299	READ ( 13 ) hom
[143]	300	CASE ( 'hom_sum' )
	301	READ ( 13 ) hom_sum
[151]	302	CASE ( 'humidity' )
	303	READ ( 13 ) humidity
	304	CASE ( 'inflow_damping_factor' )
	305	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	306	ALLOCATE( inflow_damping_factor(0:nz+1) )
	307	ENDIF
	308	READ ( 13 ) inflow_damping_factor
	309	CASE ( 'inflow_damping_height' )
	310	READ ( 13 ) inflow_damping_height
	311	CASE ( 'inflow_damping_width' )
	312	READ ( 13 ) inflow_damping_width
[1]	313	CASE ( 'inflow_disturbance_begin' )
	314	READ ( 13 ) inflow_disturbance_begin
	315	CASE ( 'inflow_disturbance_end' )
	316	READ ( 13 ) inflow_disturbance_end
	317	CASE ( 'km_constant' )
	318	READ ( 13 ) km_constant
	319	CASE ( 'km_damp_max' )
	320	READ ( 13 ) km_damp_max
[138]	321	CASE ( 'lad' )
	322	READ ( 13 ) lad
	323	CASE ( 'lad_surface' )
	324	READ ( 13 ) lad_surface
	325	CASE ( 'lad_vertical_gradient' )
	326	READ ( 13 ) lad_vertical_gradient
	327	CASE ( 'lad_vertical_gradient_level' )
	328	READ ( 13 ) lad_vertical_gradient_level
	329	CASE ( 'lad_vertical_gradient_level_in' )
	330	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	331	CASE ( 'last_dt_change' )
	332	READ ( 13 ) last_dt_change
[153]	333	CASE ( 'leaf_surface_concentration' )
	334	READ ( 13 ) leaf_surface_concentration
[1]	335	CASE ( 'long_filter_factor' )
	336	READ ( 13 ) long_filter_factor
[63]	337	CASE ( 'loop_optimization' )
	338	READ ( 13 ) loop_optimization
[151]	339	CASE ( 'mean_inflow_profiles' )
	340	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	341	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	342	ENDIF
	343	READ ( 13 ) mean_inflow_profiles
[1]	344	CASE ( 'mixing_length_1d' )
	345	READ ( 13 ) mixing_length_1d
	346	CASE ( 'momentum_advec' )
	347	READ ( 13 ) momentum_advec
	348	CASE ( 'netcdf_precision' )
	349	READ ( 13 ) netcdf_precision
	350	CASE ( 'nsor_ini' )
	351	READ ( 13 ) nsor_ini
	352	CASE ( 'nx' )
	353	READ ( 13 ) nx
[147]	354	nx_on_file = nx
[1]	355	CASE ( 'ny' )
	356	READ ( 13 ) ny
[147]	357	ny_on_file = ny
[94]	358	CASE ( 'ocean' )
	359	READ ( 13 ) ocean
[1]	360	CASE ( 'old_dt' )
	361	READ ( 13 ) old_dt
	362	CASE ( 'omega' )
	363	READ ( 13 ) omega
	364	CASE ( 'outflow_damping_width' )
	365	READ ( 13 ) outflow_damping_width
	366	CASE ( 'overshoot_limit_e' )
	367	READ ( 13 ) overshoot_limit_e
	368	CASE ( 'overshoot_limit_pt' )
	369	READ ( 13 ) overshoot_limit_pt
	370	CASE ( 'overshoot_limit_u' )
	371	READ ( 13 ) overshoot_limit_u
	372	CASE ( 'overshoot_limit_v' )
	373	READ ( 13 ) overshoot_limit_v
	374	CASE ( 'overshoot_limit_w' )
	375	READ ( 13 ) overshoot_limit_w
	376	CASE ( 'passive_scalar' )
	377	READ ( 13 ) passive_scalar
[138]	378	CASE ( 'pch_index' )
	379	READ ( 13 ) pch_index
[1]	380	CASE ( 'phi' )
	381	READ ( 13 ) phi
[138]	382	CASE ( 'plant_canopy' )
	383	READ ( 13 ) plant_canopy
[1]	384	CASE ( 'prandtl_layer' )
	385	READ ( 13 ) prandtl_layer
	386	CASE ( 'precipitation' )
	387	READ ( 13 ) precipitation
	388	CASE ( 'pt_init' )
	389	READ ( 13 ) pt_init
[57]	390	CASE ( 'pt_reference' )
	391	READ ( 13 ) pt_reference
[1]	392	CASE ( 'pt_surface' )
	393	READ ( 13 ) pt_surface
	394	CASE ( 'pt_surface_initial_change' )
	395	READ ( 13 ) pt_surface_initial_change
	396	CASE ( 'pt_vertical_gradient' )
	397	READ ( 13 ) pt_vertical_gradient
	398	CASE ( 'pt_vertical_gradient_level' )
	399	READ ( 13 ) pt_vertical_gradient_level
	400	CASE ( 'pt_vertical_gradient_level_ind' )
	401	READ ( 13 ) pt_vertical_gradient_level_ind
	402	CASE ( 'q_init' )
	403	READ ( 13 ) q_init
	404	CASE ( 'q_surface' )
	405	READ ( 13 ) q_surface
	406	CASE ( 'q_surface_initial_change' )
	407	READ ( 13 ) q_surface_initial_change
	408	CASE ( 'q_vertical_gradient' )
	409	READ ( 13 ) q_vertical_gradient
	410	CASE ( 'q_vertical_gradient_level' )
	411	READ ( 13 ) q_vertical_gradient_level
	412	CASE ( 'q_vertical_gradient_level_ind' )
	413	READ ( 13 ) q_vertical_gradient_level_ind
	414	CASE ( 'radiation' )
	415	READ ( 13 ) radiation
	416	CASE ( 'random_generator' )
	417	READ ( 13 ) random_generator
	418	CASE ( 'random_heatflux' )
	419	READ ( 13 ) random_heatflux
[151]	420	CASE ( 'recycling_width' )
	421	READ ( 13 ) recycling_width
[1]	422	CASE ( 'rif_max' )
	423	READ ( 13 ) rif_max
	424	CASE ( 'rif_min' )
	425	READ ( 13 ) rif_min
	426	CASE ( 'roughness_length' )
	427	READ ( 13 ) roughness_length
	428	CASE ( 'runnr' )
	429	READ ( 13 ) runnr
[94]	430	CASE ( 'sa_init' )
	431	READ ( 13 ) sa_init
	432	CASE ( 'sa_surface' )
	433	READ ( 13 ) sa_surface
	434	CASE ( 'sa_vertical_gradient' )
	435	READ ( 13 ) sa_vertical_gradient
	436	CASE ( 'sa_vertical_gradient_level' )
	437	READ ( 13 ) sa_vertical_gradient_level
[1]	438	CASE ( 'scalar_advec' )
	439	READ ( 13 ) scalar_advec
[153]	440	CASE ( 'scalar_exchange_coefficient' )
	441	READ ( 13 ) scalar_exchange_coefficient
[1]	442	CASE ( 'simulated_time' )
	443	READ ( 13 ) simulated_time
	444	CASE ( 'surface_heatflux' )
	445	READ ( 13 ) surface_heatflux
	446	CASE ( 'surface_pressure' )
	447	READ ( 13 ) surface_pressure
	448	CASE ( 'surface_scalarflux' )
	449	READ ( 13 ) surface_scalarflux
	450	CASE ( 'surface_waterflux' )
	451	READ ( 13 ) surface_waterflux
	452	CASE ( 's_surface' )
	453	READ ( 13 ) s_surface
	454	CASE ( 's_surface_initial_change' )
	455	READ ( 13 ) s_surface_initial_change
	456	CASE ( 's_vertical_gradient' )
	457	READ ( 13 ) s_vertical_gradient
	458	CASE ( 's_vertical_gradient_level' )
	459	READ ( 13 ) s_vertical_gradient_level
[102]	460	CASE ( 'time_coupling' )
	461	READ ( 13 ) time_coupling
[1]	462	CASE ( 'time_disturb' )
	463	READ ( 13 ) time_disturb
	464	CASE ( 'time_dopr' )
	465	READ ( 13 ) time_dopr
	466	CASE ( 'time_dopr_av' )
	467	READ ( 13 ) time_dopr_av
	468	CASE ( 'time_dopr_listing' )
	469	READ ( 13 ) time_dopr_listing
	470	CASE ( 'time_dopts' )
	471	READ ( 13 ) time_dopts
	472	CASE ( 'time_dosp' )
	473	READ ( 13 ) time_dosp
	474	CASE ( 'time_dots' )
	475	READ ( 13 ) time_dots
	476	CASE ( 'time_do2d_xy' )
	477	READ ( 13 ) time_do2d_xy
	478	CASE ( 'time_do2d_xz' )
	479	READ ( 13 ) time_do2d_xz
	480	CASE ( 'time_do2d_yz' )
	481	READ ( 13 ) time_do2d_yz
	482	CASE ( 'time_do3d' )
	483	READ ( 13 ) time_do3d
	484	CASE ( 'time_do_av' )
	485	READ ( 13 ) time_do_av
	486	CASE ( 'time_do_sla' )
	487	READ ( 13 ) time_do_sla
	488	CASE ( 'time_dvrp' )
	489	READ ( 13 ) time_dvrp
	490	CASE ( 'time_restart' )
	491	READ ( 13 ) time_restart
	492	CASE ( 'time_run_control' )
	493	READ ( 13 ) time_run_control
[116]	494	CASE ( 'time_sort_particles' )
	495	READ ( 13 ) time_sort_particles
[1]	496	CASE ( 'timestep_scheme' )
	497	READ ( 13 ) timestep_scheme
	498	CASE ( 'topography' )
	499	READ ( 13 ) topography
[256]	500	CASE ( 'topography_grid_convention' )
	501	READ ( 13 ) topography_grid_convention
[19]	502	CASE ( 'top_heatflux' )
	503	READ ( 13 ) top_heatflux
[102]	504	CASE ( 'top_momentumflux_u' )
	505	READ ( 13 ) top_momentumflux_u
	506	CASE ( 'top_momentumflux_v' )
	507	READ ( 13 ) top_momentumflux_v
[94]	508	CASE ( 'top_salinityflux' )
	509	READ ( 13 ) top_salinityflux
[1]	510	CASE ( 'tsc' )
	511	READ ( 13 ) tsc
[151]	512	CASE ( 'turbulent_inflow' )
	513	READ ( 13 ) turbulent_inflow
[241]	514	CASE ( 'u_bulk' )
	515	READ ( 13 ) u_bulk
[1]	516	CASE ( 'u_init' )
	517	READ ( 13 ) u_init
	518	CASE ( 'u_max' )
	519	READ ( 13 ) u_max
	520	CASE ( 'u_max_ijk' )
	521	READ ( 13 ) u_max_ijk
	522	CASE ( 'ug' )
	523	READ ( 13 ) ug
	524	CASE ( 'ug_surface' )
	525	READ ( 13 ) ug_surface
	526	CASE ( 'ug_vertical_gradient' )
	527	READ ( 13 ) ug_vertical_gradient
	528	CASE ( 'ug_vertical_gradient_level' )
	529	READ ( 13 ) ug_vertical_gradient_level
	530	CASE ( 'ug_vertical_gradient_level_ind' )
	531	READ ( 13 ) ug_vertical_gradient_level_ind
	532	CASE ( 'ups_limit_e' )
	533	READ ( 13 ) ups_limit_e
	534	CASE ( 'ups_limit_pt' )
	535	READ ( 13 ) ups_limit_pt
	536	CASE ( 'ups_limit_u' )
	537	READ ( 13 ) ups_limit_u
	538	CASE ( 'ups_limit_v' )
	539	READ ( 13 ) ups_limit_v
	540	CASE ( 'ups_limit_w' )
	541	READ ( 13 ) ups_limit_w
	542	CASE ( 'use_surface_fluxes' )
	543	READ ( 13 ) use_surface_fluxes
[20]	544	CASE ( 'use_top_fluxes' )
	545	READ ( 13 ) use_top_fluxes
[1]	546	CASE ( 'use_ug_for_galilei_tr' )
	547	READ ( 13 ) use_ug_for_galilei_tr
	548	CASE ( 'use_upstream_for_tke' )
	549	READ ( 13 ) use_upstream_for_tke
[241]	550	CASE ( 'v_bulk' )
	551	READ ( 13 ) v_bulk
[1]	552	CASE ( 'v_init' )
	553	READ ( 13 ) v_init
	554	CASE ( 'v_max' )
	555	READ ( 13 ) v_max
	556	CASE ( 'v_max_ijk' )
	557	READ ( 13 ) v_max_ijk
	558	CASE ( 'vg' )
	559	READ ( 13 ) vg
	560	CASE ( 'vg_surface' )
	561	READ ( 13 ) vg_surface
	562	CASE ( 'vg_vertical_gradient' )
	563	READ ( 13 ) vg_vertical_gradient
	564	CASE ( 'vg_vertical_gradient_level' )
	565	READ ( 13 ) vg_vertical_gradient_level
	566	CASE ( 'vg_vertical_gradient_level_ind' )
	567	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	568	CASE ( 'volume_flow_area' )
	569	READ ( 13 ) volume_flow_area
	570	CASE ( 'volume_flow_initial' )
	571	READ ( 13 ) volume_flow_initial
[1]	572	CASE ( 'wall_adjustment' )
	573	READ ( 13 ) wall_adjustment
	574	CASE ( 'w_max' )
	575	READ ( 13 ) w_max
	576	CASE ( 'w_max_ijk' )
	577	READ ( 13 ) w_max_ijk
	578
	579	CASE DEFAULT
[257]	580	WRITE( message_string, * ) 'unknown variable named "', &
	581	TRIM( variable_chr ), '" found in', &
	582	' data from prior run on PE ', myid
	583	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	584	END SELECT
	585	!
	586	!-- Read next string
	587	READ ( 13 ) variable_chr
	588
	589	ENDDO
	590
	591
[146]	592	END SUBROUTINE read_var_list
[143]	593
[146]	594
	595
[147]	596	SUBROUTINE read_parts_of_var_list
	597
	598	!------------------------------------------------------------------------------!
	599	! Description:
	600	! ------------
	601	! Skipping the global control variables from restart-file (binary format)
	602	! except some informations needed when reading restart data from a previous
[151]	603	! run which used a smaller total domain or/and a different domain decomposition.
[147]	604	!------------------------------------------------------------------------------!
	605
[151]	606	USE arrays_3d
[147]	607	USE control_parameters
	608	USE indices
	609	USE pegrid
	610	USE statistics
	611
	612	IMPLICIT NONE
	613
	614	CHARACTER (LEN=10) :: version_on_file
	615	CHARACTER (LEN=30) :: variable_chr
	616
	617	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	618	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	619
[151]	620	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	621	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	622
	623
	624	CALL check_open( 13 )
	625
	626	WRITE (9,*) 'rpovl: after check open 13'
	627	CALL local_flush( 9 )
	628	READ ( 13 ) version_on_file
	629
	630	!
	631	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	632	!-- run
	633	READ ( 13 ) variable_chr
	634	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	635	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	636	'run on PE ', myid
[257]	637	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	638	ENDIF
	639	READ ( 13 ) numprocs_previous_run
	640
	641	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	642	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	643	ENDIF
	644
	645	READ ( 13 ) variable_chr
	646	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	647	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	648	'prior run on PE ', myid
	649	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	650	ENDIF
	651	READ ( 13 ) hor_index_bounds_previous_run
	652
	653	!
	654	!-- Read vertical number of gridpoints and number of different areas used
	655	!-- for computing statistics. Allocate arrays depending on these values,
	656	!-- which are needed for the following read instructions.
	657	READ ( 13 ) variable_chr
	658	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	659	message_string = 'nz not found in restart data file'
	660	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	661	ENDIF
	662	READ ( 13 ) nz_on_file
	663	IF ( nz_on_file /= nz ) THEN
[257]	664	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	665	'gridpoints along z', &
	666	'&nz on file = "', nz_on_file, '"', &
	667	'&nz from run = "', nz, '"'
[257]	668	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	669	ENDIF
	670
	671	READ ( 13 ) variable_chr
	672	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	673	message_string = 'max_pr_user not found in restart data file'
	674	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	675	ENDIF
	676	READ ( 13 ) max_pr_user_on_file
[170]	677	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	678	WRITE( message_string, * ) 'number of user profiles on res', &
	679	'tart data file differs from the current ', &
	680	'run&max_pr_user on file = "', &
	681	max_pr_user_on_file, '"', &
	682	'&max_pr_user from run = "', &
[257]	683	max_pr_user, '"'
	684	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	685	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	686	ELSE
	687	tmp_mpru = max_pr_user
[147]	688	ENDIF
	689
	690	READ ( 13 ) variable_chr
	691	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	692	message_string = 'statistic_regions not found in restart data file'
	693	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	694	ENDIF
	695	READ ( 13 ) statistic_regions_on_file
[173]	696	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	697	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	698	'differ from the current run', &
	699	'&statistic regions on file = "', &
	700	statistic_regions_on_file, '"', &
	701	'&statistic regions from run = "', &
	702	statistic_regions, '"', &
[257]	703	'&statistic data may be lost!'
	704	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	705	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	706	ELSE
	707	tmp_sr = statistic_regions
[147]	708	ENDIF
	709
	710
	711	!
	712	!-- Now read and check some control parameters and skip the rest
	713	!-- The total domain of the pre-run must not be smaller than the subdomain
	714	!-- of the current run, because the mapping of data from the pre-run does
	715	!-- not work for this case.
	716	WRITE (9,*) 'wpovl: begin reading variables'
	717	CALL local_flush( 9 )
	718	READ ( 13 ) variable_chr
	719
	720	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	721
	722	SELECT CASE ( TRIM( variable_chr ) )
	723
[151]	724	CASE ( 'average_count_pr' )
	725	READ ( 13 ) average_count_pr
[257]	726	IF ( average_count_pr /= 0 ) THEN
[274]	727	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	728	'averaged. &Averaging will be done now using ', &
	729	average_count_pr, ' samples.'
	730	CALL message( 'read_parts_of_var_list', 'PA0309', &
	731	0, 1, 0, 6, 0 )
[151]	732	ENDIF
	733
[147]	734	CASE ( 'hom' )
	735	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	736	0:statistic_regions_on_file) )
	737	READ ( 13 ) hom_on_file
[170]	738	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	739	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	740	DEALLOCATE( hom_on_file )
	741
[151]	742	CASE ( 'hom_sum' )
	743	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	744	0:statistic_regions_on_file) )
	745	READ ( 13 ) hom_sum_on_file
[170]	746	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	747	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	748	DEALLOCATE( hom_sum_on_file )
	749
[147]	750	CASE ( 'nx' )
	751	READ ( 13 ) nx_on_file
	752
	753	CASE ( 'ny' )
	754	READ ( 13 ) ny_on_file
	755
	756
	757	CASE DEFAULT
	758
	759	READ ( 13 ) idum
	760
	761	END SELECT
	762
	763	READ ( 13 ) variable_chr
	764
	765	ENDDO
	766
[151]	767	!
	768	!-- Calculate the temporal average of vertical profiles, if neccessary
	769	IF ( average_count_pr /= 0 ) THEN
	770	hom_sum = hom_sum / REAL( average_count_pr )
	771	ENDIF
[147]	772
[151]	773
[147]	774	END SUBROUTINE read_parts_of_var_list
	775
	776
	777
[146]	778	SUBROUTINE skip_var_list
	779
	780	!------------------------------------------------------------------------------!
	781	! Description:
	782	! ------------
	783	! Skipping the global control variables from restart-file (binary format)
	784	!------------------------------------------------------------------------------!
	785
[147]	786	IMPLICIT NONE
	787
[146]	788	CHARACTER (LEN=10) :: version_on_file
	789	CHARACTER (LEN=30) :: variable_chr
	790
	791	INTEGER :: idum
	792
	793
[147]	794	WRITE (9,*) 'skipvl #1'
	795	CALL local_flush( 9 )
[146]	796	READ ( 13 ) version_on_file
	797
[147]	798	WRITE (9,*) 'skipvl before variable_chr'
	799	CALL local_flush( 9 )
[146]	800	READ ( 13 ) variable_chr
[147]	801	WRITE (9,*) 'skipvl after variable_chr'
	802	CALL local_flush( 9 )
[146]	803
	804	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	805
[147]	806	WRITE (9,*) 'skipvl chr = ', variable_chr
	807	CALL local_flush( 9 )
[146]	808	READ ( 13 ) idum
	809	READ ( 13 ) variable_chr
	810
	811	ENDDO
[147]	812	WRITE (9,*) 'skipvl last'
	813	CALL local_flush( 9 )
[146]	814
	815
	816	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |