Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1695

Last change on this file since 1695 was 1692, checked in by maronga, 9 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 36.8 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[1036]	2	!--------------------------------------------------------------------------------!
	3	! This file is part of PALM.
	4	!
	5	! PALM is free software: you can redistribute it and/or modify it under the terms
	6	! of the GNU General Public License as published by the Free Software Foundation,
	7	! either version 3 of the License, or (at your option) any later version.
	8	!
	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	10	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	11	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	12	!
	13	! You should have received a copy of the GNU General Public License along with
	14	! PALM. If not, see <http://www.gnu.org/licenses/>.
	15	!
[1691]	16	! Copyright 1997-2015 Leibniz Universitaet Hannover
[1036]	17	!--------------------------------------------------------------------------------!
	18	!
[257]	19	! Current revisions:
[622]	20	! ------------------
[1485]	21	!
[1692]	22	!
[1485]	23	! Former revisions:
	24	! -----------------
	25	! $Id: read_var_list.f90 1692 2015-10-26 16:29:17Z maronga $
	26	!
[1692]	27	! 1691 2015-10-26 16:17:44Z maronga
	28	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
	29	! output of prandtl_layer and rif_min, rif_max.
	30	!
[1683]	31	! 1682 2015-10-07 23:56:08Z knoop
	32	! Code annotations made doxygen readable
	33	!
[1616]	34	! 1615 2015-07-08 18:49:19Z suehring
	35	! Enable turbulent inflow for passive_scalar and humidity
	36	!
[1586]	37	! 1585 2015-04-30 07:05:52Z maronga
	38	! Adapted for RRTMG
	39	!
[1561]	40	! 1560 2015-03-06 10:48:54Z keck
	41	! +recycling_yshift
	42	!
[1523]	43	! 1522 2015-01-14 10:53:12Z keck
	44	! added query for checking if the advection scheme in the restart run is the
	45	! same as the advection scheme in the corresponding initial run
	46	!
[1503]	47	! 1502 2014-12-03 18:22:31Z kanani
	48	! Canopy module and parameters removed (parameters are always read from
	49	! canopy_par NAMELIST for initial and restart runs)
	50	!
[1497]	51	! 1496 2014-12-02 17:25:50Z maronga
	52	! Renamed "radiation" -> "cloud_top_radiation"
	53	!
[1485]	54	! 1484 2014-10-21 10:53:05Z kanani
[1484]	55	! Changes in the course of the canopy-model modularization:
	56	! parameters alpha_lad, beta_lad, lai_beta added,
	57	! module plant_canopy_model_mod added,
	58	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	59	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	60	!
[1323]	61	! 1322 2014-03-20 16:38:49Z raasch
	62	! REAL functions provided with KIND-attribute
	63	!
[1321]	64	! 1320 2014-03-20 08:40:49Z raasch
[1320]	65	! ONLY-attribute added to USE-statements,
	66	! kind-parameters added to all INTEGER and REAL declaration statements,
	67	! kinds are defined in new module kinds,
	68	! old module precision_kind is removed,
	69	! revision history before 2012 removed,
	70	! comment fields (!:) to be used for variable explanations added to
	71	! all variable declaration statements
[1054]	72	!
[1309]	73	! 1308 2014-03-13 14:58:42Z fricke
	74	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	75	! +do3d_time_count
	76	!
[1254]	77	! 1253 2013-11-07 10:48:12Z fricke
	78	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
	79	! is zero for initializing_actions = 'cyclic_fill'
	80	!
[1242]	81	! 1241 2013-10-30 11:36:58Z heinze
	82	! +nudging
	83	! +large_scale_forcing
	84	!
[1196]	85	! 1195 2013-07-01 12:27:57Z heinze
	86	! Bugfix: allocate ref_state
	87	!
[1182]	88	! 1179 2013-06-14 05:57:58Z raasch
	89	! +ref_state
	90	!
[1116]	91	! 1115 2013-03-26 18:16:16Z hoffmann
	92	! unused variables removed
	93	!
[1093]	94	! 1092 2013-02-02 11:24:22Z raasch
	95	! unused variables removed
	96	!
[1066]	97	! 1065 2012-11-22 17:42:36Z hoffmann
	98	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	99	! -mu_constant, mu_constant_value
	100	!
[1054]	101	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	102	! necessary expansions according to the two new prognostic equations (nr, qr)
	103	! of the two-moment cloud physics scheme:
	104	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	105	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	106	! +surface_waterflux_*
[601]	107	!
[1053]	108	! in addition, steering parameters parameters of the two-moment cloud physics
	109	! scheme:
	110	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	111	!
[1037]	112	! 1036 2012-10-22 13:43:42Z raasch
	113	! code put under GPL (PALM 3.9)
	114	!
[1017]	115	! 1015 2012-09-27 09:23:24Z raasch
	116	! -adjust_mixing_length
	117	!
[1004]	118	! 1003 2012-09-14 14:35:53Z raasch
	119	! -grid_matching
	120	!
[1002]	121	! 1001 2012-09-13 14:08:46Z raasch
	122	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	123	! overshoot_limit_, ups_limit_
	124	!
[979]	125	! 978 2012-08-09 08:28:32Z fricke
	126	! -km_damp_max, outflow_damping_width
	127	! +pt_damping_factor, pt_damping_width
	128	! +z0h_factor
	129	!
[941]	130	! 940 2012-07-09 14:31:00Z raasch
	131	! +neutral
	132	!
[928]	133	! 927 2012-06-06 19:15:04Z raasch
	134	! +masking_method
	135	!
[850]	136	! 849 2012-03-15 10:35:09Z raasch
	137	! first_call_advec_particles renamed first_call_lpm
	138	!
[826]	139	! 824 2012-02-17 09:09:57Z raasch
	140	! +curvature_solution_effects
	141	!
[1]	142	! Revision 1.1 1998/03/18 20:18:48 raasch
	143	! Initial revision
	144	!
	145	!
	146	! Description:
	147	! ------------
[1682]	148	!> Reading values of global control variables from restart-file (binary format)
[1]	149	!------------------------------------------------------------------------------!
[1682]	150	SUBROUTINE read_var_list
	151
[1]	152
[1320]	153	USE arrays_3d, &
[1484]	154	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1320]	155	q_init, ref_state, sa_init, u_init, ug, v_init, vg
	156
	157	USE cloud_parameters, &
	158	ONLY: c_sedimentation, curvature_solution_effects, &
	159	limiter_sedimentation, nc_const, ventilation_effect
	160
[87]	161	USE control_parameters
[1320]	162
	163	USE grid_variables, &
	164	ONLY: dx, dy
	165
	166	USE indices, &
	167	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	168
	169	USE model_1d, &
	170	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	171
[345]	172	USE netcdf_control
[1320]	173
	174	USE particle_attributes, &
	175	ONLY: time_sort_particles
	176
[1]	177	USE pegrid
	178
[1585]	179	USE radiation_model_mod, &
	180	ONLY: time_radiation
	181
[1320]	182	USE statistics, &
	183	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	184	v_max, v_max_ijk, w_max, w_max_ijk
	185
[1691]	186
[1]	187	IMPLICIT NONE
	188
	189	CHARACTER (LEN=10) :: binary_version, version_on_file
	190	CHARACTER (LEN=30) :: variable_chr
[87]	191
[143]	192
[1]	193	CALL check_open( 13 )
	194
	195	!
	196	!-- Make version number check first
	197	READ ( 13 ) version_on_file
[1308]	198	binary_version = '3.9b'
[1]	199	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	200	WRITE( message_string, * ) 'version mismatch concerning control ', &
	201	'variables', &
	202	'&version on file = "', &
	203	TRIM( version_on_file ), '"', &
	204	'&version on program = "', &
	205	TRIM( binary_version ), '"'
	206	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	207	ENDIF
	208
	209	!
[145]	210	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	211	!-- run
	212	READ ( 13 ) variable_chr
	213	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	214	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	215	'run on PE ', myid
[257]	216	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	217	ENDIF
	218	READ ( 13 ) numprocs_previous_run
	219
[146]	220	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	221	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	222	ENDIF
[145]	223
	224	READ ( 13 ) variable_chr
	225	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	226	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	227	'prior run on PE ', myid
	228	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	229	ENDIF
	230	READ ( 13 ) hor_index_bounds_previous_run
	231
	232	!
[1]	233	!-- Read vertical number of gridpoints and number of different areas used
	234	!-- for computing statistics. Allocate arrays depending on these values,
	235	!-- which are needed for the following read instructions.
	236	READ ( 13 ) variable_chr
	237	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	238	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	239	myid
	240	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	241	ENDIF
	242	READ ( 13 ) nz
[87]	243
[1]	244	READ ( 13 ) variable_chr
[87]	245	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	246	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	247	'prior run on PE ', myid
[257]	248	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	249	ENDIF
[159]	250	READ ( 13 ) max_pr_user ! This value is checked against the number of
	251	! user profiles given for the current run
	252	! in routine user_parin (it has to match)
[87]	253
	254	READ ( 13 ) variable_chr
[1]	255	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	256	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	257	'prior run on PE ', myid
[257]	258	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	259	ENDIF
	260	READ ( 13 ) statistic_regions
[146]	261	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	262	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	263	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	264	ref_state(0:nz+1), sa_init(0:nz+1), &
	265	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	266	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	267	ENDIF
[1]	268
	269	!
	270	!-- Now read all control parameters:
	271	!-- Caution: When the following read instructions have been changed, the
	272	!-- ------- version number stored in the variable binary_version has to be
	273	!-- increased. The same changes must also be done in write_var_list.
	274	READ ( 13 ) variable_chr
	275	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	276
	277	SELECT CASE ( TRIM( variable_chr ) )
	278
	279	CASE ( 'advected_distance_x' )
	280	READ ( 13 ) advected_distance_x
	281	CASE ( 'advected_distance_y' )
	282	READ ( 13 ) advected_distance_y
	283	CASE ( 'alpha_surface' )
	284	READ ( 13 ) alpha_surface
	285	CASE ( 'average_count_pr' )
	286	READ ( 13 ) average_count_pr
	287	CASE ( 'average_count_sp' )
	288	READ ( 13 ) average_count_sp
	289	CASE ( 'average_count_3d' )
	290	READ ( 13 ) average_count_3d
	291	CASE ( 'bc_e_b' )
	292	READ ( 13 ) bc_e_b
	293	CASE ( 'bc_lr' )
	294	READ ( 13 ) bc_lr
	295	CASE ( 'bc_ns' )
	296	READ ( 13 ) bc_ns
	297	CASE ( 'bc_p_b' )
	298	READ ( 13 ) bc_p_b
	299	CASE ( 'bc_p_t' )
	300	READ ( 13 ) bc_p_t
	301	CASE ( 'bc_pt_b' )
	302	READ ( 13 ) bc_pt_b
	303	CASE ( 'bc_pt_t' )
	304	READ ( 13 ) bc_pt_t
	305	CASE ( 'bc_pt_t_val' )
	306	READ ( 13 ) bc_pt_t_val
	307	CASE ( 'bc_q_b' )
	308	READ ( 13 ) bc_q_b
	309	CASE ( 'bc_q_t' )
	310	READ ( 13 ) bc_q_t
	311	CASE ( 'bc_q_t_val' )
	312	READ ( 13 ) bc_q_t_val
	313	CASE ( 'bc_s_b' )
	314	READ ( 13 ) bc_s_b
	315	CASE ( 'bc_s_t' )
	316	READ ( 13 ) bc_s_t
[95]	317	CASE ( 'bc_sa_t' )
	318	READ ( 13 ) bc_sa_t
[1]	319	CASE ( 'bc_uv_b' )
	320	READ ( 13 ) bc_uv_b
	321	CASE ( 'bc_uv_t' )
	322	READ ( 13 ) bc_uv_t
[95]	323	CASE ( 'bottom_salinityflux' )
	324	READ ( 13 ) bottom_salinityflux
[1]	325	CASE ( 'building_height' )
	326	READ ( 13 ) building_height
	327	CASE ( 'building_length_x' )
	328	READ ( 13 ) building_length_x
	329	CASE ( 'building_length_y' )
	330	READ ( 13 ) building_length_y
	331	CASE ( 'building_wall_left' )
	332	READ ( 13 ) building_wall_left
	333	CASE ( 'building_wall_south' )
	334	READ ( 13 ) building_wall_south
[600]	335	CASE ( 'call_psolver_at_all_substeps' )
	336	READ ( 13 ) call_psolver_at_all_substeps
[240]	337	CASE ( 'canyon_height' )
	338	READ ( 13 ) canyon_height
	339	CASE ( 'canyon_width_x' )
	340	READ ( 13 ) canyon_width_x
	341	CASE ( 'canyon_width_y' )
	342	READ ( 13 ) canyon_width_y
	343	CASE ( 'canyon_wall_left' )
	344	READ ( 13 ) canyon_wall_left
	345	CASE ( 'canyon_wall_south' )
	346	READ ( 13 ) canyon_wall_south
[1065]	347	CASE ( 'c_sedimentation' )
	348	READ ( 13 ) c_sedimentation
[600]	349	CASE ( 'cfl_factor' )
	350	READ ( 13 ) cfl_factor
[1]	351	CASE ( 'cloud_droplets' )
	352	READ ( 13 ) cloud_droplets
	353	CASE ( 'cloud_physics' )
	354	READ ( 13 ) cloud_physics
[1053]	355	CASE ( 'cloud_scheme' )
	356	READ ( 13 ) cloud_scheme
[622]	357	CASE ( 'collective_wait' )
	358	READ ( 13 ) collective_wait
[1]	359	CASE ( 'conserve_volume_flow' )
	360	READ ( 13 ) conserve_volume_flow
[241]	361	CASE ( 'conserve_volume_flow_mode' )
	362	READ ( 13 ) conserve_volume_flow_mode
[1691]	363	CASE ( 'constant_flux_layer' )
	364	READ ( 13 ) constant_flux_layer
[291]	365	CASE ( 'coupling_start_time' )
	366	READ ( 13 ) coupling_start_time
[1]	367	CASE ( 'current_timestep_number' )
	368	READ ( 13 ) current_timestep_number
[824]	369	CASE ( 'curvature_solution_effects' )
	370	READ ( 13 ) curvature_solution_effects
[600]	371	CASE ( 'cycle_mg' )
	372	READ ( 13 ) cycle_mg
[1]	373	CASE ( 'damp_level_1d' )
	374	READ ( 13 ) damp_level_1d
	375	CASE ( 'dissipation_1d' )
	376	READ ( 13 ) dissipation_1d
[1308]	377	CASE ( 'do2d_xy_time_count' )
	378	READ ( 13 ) do2d_xy_time_count
	379	CASE ( 'do2d_xz_time_count' )
	380	READ ( 13 ) do2d_xz_time_count
	381	CASE ( 'do2d_yz_time_count' )
	382	READ ( 13 ) do2d_yz_time_count
	383	CASE ( 'do3d_time_count' )
	384	READ ( 13 ) do3d_time_count
[240]	385	CASE ( 'dp_external' )
	386	READ ( 13 ) dp_external
	387	CASE ( 'dp_level_b' )
	388	READ ( 13 ) dp_level_b
	389	CASE ( 'dp_smooth' )
	390	READ ( 13 ) dp_smooth
	391	CASE ( 'dpdxy' )
	392	READ ( 13 ) dpdxy
[1053]	393	CASE ( 'drizzle' )
	394	READ ( 13 ) drizzle
[1]	395	CASE ( 'dt_pr_1d' )
	396	READ ( 13 ) dt_pr_1d
	397	CASE ( 'dt_run_control_1d' )
	398	READ ( 13 ) dt_run_control_1d
	399	CASE ( 'dt_3d' )
	400	READ ( 13 ) dt_3d
	401	CASE ( 'dvrp_filecount' )
	402	READ ( 13 ) dvrp_filecount
	403	CASE ( 'dx' )
	404	READ ( 13 ) dx
	405	CASE ( 'dy' )
	406	READ ( 13 ) dy
	407	CASE ( 'dz' )
	408	READ ( 13 ) dz
	409	CASE ( 'dz_max' )
	410	READ ( 13 ) dz_max
	411	CASE ( 'dz_stretch_factor' )
	412	READ ( 13 ) dz_stretch_factor
	413	CASE ( 'dz_stretch_level' )
	414	READ ( 13 ) dz_stretch_level
	415	CASE ( 'e_min' )
	416	READ ( 13 ) e_min
	417	CASE ( 'end_time_1d' )
	418	READ ( 13 ) end_time_1d
	419	CASE ( 'fft_method' )
	420	READ ( 13 ) fft_method
[849]	421	CASE ( 'first_call_lpm' )
	422	READ ( 13 ) first_call_lpm
[1]	423	CASE ( 'galilei_transformation' )
	424	READ ( 13 ) galilei_transformation
	425	CASE ( 'hom' )
	426	READ ( 13 ) hom
[143]	427	CASE ( 'hom_sum' )
	428	READ ( 13 ) hom_sum
[151]	429	CASE ( 'humidity' )
	430	READ ( 13 ) humidity
	431	CASE ( 'inflow_damping_factor' )
	432	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	433	ALLOCATE( inflow_damping_factor(0:nz+1) )
	434	ENDIF
	435	READ ( 13 ) inflow_damping_factor
	436	CASE ( 'inflow_damping_height' )
	437	READ ( 13 ) inflow_damping_height
	438	CASE ( 'inflow_damping_width' )
	439	READ ( 13 ) inflow_damping_width
[1]	440	CASE ( 'inflow_disturbance_begin' )
	441	READ ( 13 ) inflow_disturbance_begin
	442	CASE ( 'inflow_disturbance_end' )
	443	READ ( 13 ) inflow_disturbance_end
	444	CASE ( 'km_constant' )
	445	READ ( 13 ) km_constant
[1241]	446	CASE ( 'large_scale_forcing' )
	447	READ ( 13 ) large_scale_forcing
[411]	448	CASE ( 'large_scale_subsidence' )
	449	READ ( 13 ) large_scale_subsidence
[1065]	450	CASE ( 'limiter_sedimentation' )
	451	READ ( 13 ) limiter_sedimentation
[63]	452	CASE ( 'loop_optimization' )
	453	READ ( 13 ) loop_optimization
[927]	454	CASE ( 'masking_method' )
	455	READ ( 13 ) masking_method
[151]	456	CASE ( 'mean_inflow_profiles' )
	457	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1615]	458	ALLOCATE( mean_inflow_profiles(0:nz+1,6) )
[151]	459	ENDIF
	460	READ ( 13 ) mean_inflow_profiles
[600]	461	CASE ( 'mg_cycles' )
	462	READ ( 13 ) mg_cycles
	463	CASE ( 'mg_switch_to_pe0_level' )
	464	READ ( 13 ) mg_switch_to_pe0_level
[1]	465	CASE ( 'mixing_length_1d' )
	466	READ ( 13 ) mixing_length_1d
	467	CASE ( 'momentum_advec' )
	468	READ ( 13 ) momentum_advec
[1691]	469	CASE ( 'most_method' )
	470	READ ( 13 ) most_method
[1115]	471	CASE ( 'nc_const' )
	472	READ ( 13 ) nc_const
[1]	473	CASE ( 'netcdf_precision' )
	474	READ ( 13 ) netcdf_precision
[940]	475	CASE ( 'neutral' )
	476	READ ( 13 ) neutral
[600]	477	CASE ( 'ngsrb' )
	478	READ ( 13 ) ngsrb
	479	CASE ( 'nsor' )
	480	READ ( 13 ) nsor
[1]	481	CASE ( 'nsor_ini' )
	482	READ ( 13 ) nsor_ini
[1241]	483	CASE ( 'nudging' )
	484	READ ( 13 ) nudging
[1]	485	CASE ( 'nx' )
	486	READ ( 13 ) nx
[147]	487	nx_on_file = nx
[1]	488	CASE ( 'ny' )
	489	READ ( 13 ) ny
[147]	490	ny_on_file = ny
[94]	491	CASE ( 'ocean' )
	492	READ ( 13 ) ocean
[1]	493	CASE ( 'old_dt' )
	494	READ ( 13 ) old_dt
	495	CASE ( 'omega' )
	496	READ ( 13 ) omega
[600]	497	CASE ( 'omega_sor' )
	498	READ ( 13 ) omega_sor
[345]	499	CASE ( 'output_for_t0' )
	500	READ (13) output_for_t0
[1]	501	CASE ( 'passive_scalar' )
	502	READ ( 13 ) passive_scalar
	503	CASE ( 'phi' )
	504	READ ( 13 ) phi
[600]	505	CASE ( 'prandtl_number' )
	506	READ ( 13 ) prandtl_number
[1]	507	CASE ( 'precipitation' )
	508	READ ( 13 ) precipitation
[600]	509	CASE ( 'psolver' )
	510	READ ( 13 ) psolver
[978]	511	CASE ( 'pt_damping_factor' )
	512	READ ( 13 ) pt_damping_factor
	513	CASE ( 'pt_damping_width' )
	514	READ ( 13 ) pt_damping_width
[1]	515	CASE ( 'pt_init' )
	516	READ ( 13 ) pt_init
[57]	517	CASE ( 'pt_reference' )
	518	READ ( 13 ) pt_reference
[1]	519	CASE ( 'pt_surface' )
	520	READ ( 13 ) pt_surface
	521	CASE ( 'pt_surface_initial_change' )
	522	READ ( 13 ) pt_surface_initial_change
	523	CASE ( 'pt_vertical_gradient' )
	524	READ ( 13 ) pt_vertical_gradient
	525	CASE ( 'pt_vertical_gradient_level' )
	526	READ ( 13 ) pt_vertical_gradient_level
	527	CASE ( 'pt_vertical_gradient_level_ind' )
	528	READ ( 13 ) pt_vertical_gradient_level_ind
	529	CASE ( 'q_init' )
	530	READ ( 13 ) q_init
	531	CASE ( 'q_surface' )
	532	READ ( 13 ) q_surface
	533	CASE ( 'q_surface_initial_change' )
	534	READ ( 13 ) q_surface_initial_change
	535	CASE ( 'q_vertical_gradient' )
	536	READ ( 13 ) q_vertical_gradient
	537	CASE ( 'q_vertical_gradient_level' )
	538	READ ( 13 ) q_vertical_gradient_level
	539	CASE ( 'q_vertical_gradient_level_ind' )
	540	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	541	CASE ( 'cloud_top_radiation' )
	542	READ ( 13 ) cloud_top_radiation
[1]	543	CASE ( 'random_generator' )
	544	READ ( 13 ) random_generator
	545	CASE ( 'random_heatflux' )
	546	READ ( 13 ) random_heatflux
[600]	547	CASE ( 'rayleigh_damping_factor' )
	548	READ ( 13 ) rayleigh_damping_factor
	549	CASE ( 'rayleigh_damping_height' )
	550	READ ( 13 ) rayleigh_damping_height
[151]	551	CASE ( 'recycling_width' )
	552	READ ( 13 ) recycling_width
[1560]	553	CASE ( 'recycling_yshift' )
	554	READ ( 13 ) recycling_yshift
[1179]	555	CASE ( 'reference_state' )
	556	READ ( 13 ) reference_state
	557	CASE ( 'ref_state' )
	558	READ ( 13 ) ref_state
[600]	559	CASE ( 'residual_limit' )
	560	READ ( 13 ) residual_limit
[1]	561	CASE ( 'roughness_length' )
	562	READ ( 13 ) roughness_length
	563	CASE ( 'runnr' )
	564	READ ( 13 ) runnr
[291]	565	CASE ( 'run_coupled' )
	566	READ ( 13 ) run_coupled
[94]	567	CASE ( 'sa_init' )
	568	READ ( 13 ) sa_init
	569	CASE ( 'sa_surface' )
	570	READ ( 13 ) sa_surface
	571	CASE ( 'sa_vertical_gradient' )
	572	READ ( 13 ) sa_vertical_gradient
	573	CASE ( 'sa_vertical_gradient_level' )
	574	READ ( 13 ) sa_vertical_gradient_level
[1]	575	CASE ( 'scalar_advec' )
	576	READ ( 13 ) scalar_advec
	577	CASE ( 'simulated_time' )
	578	READ ( 13 ) simulated_time
	579	CASE ( 'surface_heatflux' )
	580	READ ( 13 ) surface_heatflux
	581	CASE ( 'surface_pressure' )
	582	READ ( 13 ) surface_pressure
	583	CASE ( 'surface_scalarflux' )
	584	READ ( 13 ) surface_scalarflux
	585	CASE ( 'surface_waterflux' )
[1053]	586	READ ( 13 ) surface_waterflux
[1]	587	CASE ( 's_surface' )
	588	READ ( 13 ) s_surface
	589	CASE ( 's_surface_initial_change' )
	590	READ ( 13 ) s_surface_initial_change
	591	CASE ( 's_vertical_gradient' )
	592	READ ( 13 ) s_vertical_gradient
	593	CASE ( 's_vertical_gradient_level' )
	594	READ ( 13 ) s_vertical_gradient_level
[102]	595	CASE ( 'time_coupling' )
	596	READ ( 13 ) time_coupling
[1]	597	CASE ( 'time_disturb' )
	598	READ ( 13 ) time_disturb
[1502]	599	CASE ( 'time_dopr' )
[1]	600	READ ( 13 ) time_dopr
[587]	601	CASE ( 'time_domask' )
	602	READ ( 13 ) time_domask
[1]	603	CASE ( 'time_dopr_av' )
	604	READ ( 13 ) time_dopr_av
	605	CASE ( 'time_dopr_listing' )
	606	READ ( 13 ) time_dopr_listing
	607	CASE ( 'time_dopts' )
	608	READ ( 13 ) time_dopts
	609	CASE ( 'time_dosp' )
	610	READ ( 13 ) time_dosp
	611	CASE ( 'time_dots' )
	612	READ ( 13 ) time_dots
	613	CASE ( 'time_do2d_xy' )
	614	READ ( 13 ) time_do2d_xy
	615	CASE ( 'time_do2d_xz' )
	616	READ ( 13 ) time_do2d_xz
	617	CASE ( 'time_do2d_yz' )
	618	READ ( 13 ) time_do2d_yz
	619	CASE ( 'time_do3d' )
	620	READ ( 13 ) time_do3d
	621	CASE ( 'time_do_av' )
	622	READ ( 13 ) time_do_av
	623	CASE ( 'time_do_sla' )
	624	READ ( 13 ) time_do_sla
	625	CASE ( 'time_dvrp' )
	626	READ ( 13 ) time_dvrp
[1585]	627	CASE ( 'time_radiation' )
	628	READ ( 13 ) time_radiation
[1]	629	CASE ( 'time_restart' )
	630	READ ( 13 ) time_restart
	631	CASE ( 'time_run_control' )
	632	READ ( 13 ) time_run_control
[291]	633	CASE ( 'time_since_reference_point' )
	634	READ ( 13 ) time_since_reference_point
[116]	635	CASE ( 'time_sort_particles' )
	636	READ ( 13 ) time_sort_particles
[1]	637	CASE ( 'timestep_scheme' )
	638	READ ( 13 ) timestep_scheme
	639	CASE ( 'topography' )
	640	READ ( 13 ) topography
[256]	641	CASE ( 'topography_grid_convention' )
	642	READ ( 13 ) topography_grid_convention
[19]	643	CASE ( 'top_heatflux' )
	644	READ ( 13 ) top_heatflux
[102]	645	CASE ( 'top_momentumflux_u' )
	646	READ ( 13 ) top_momentumflux_u
	647	CASE ( 'top_momentumflux_v' )
	648	READ ( 13 ) top_momentumflux_v
[94]	649	CASE ( 'top_salinityflux' )
	650	READ ( 13 ) top_salinityflux
[1]	651	CASE ( 'tsc' )
	652	READ ( 13 ) tsc
[1065]	653	CASE ( 'turbulence' )
	654	READ ( 13 ) turbulence
[151]	655	CASE ( 'turbulent_inflow' )
	656	READ ( 13 ) turbulent_inflow
[241]	657	CASE ( 'u_bulk' )
	658	READ ( 13 ) u_bulk
[1]	659	CASE ( 'u_init' )
	660	READ ( 13 ) u_init
	661	CASE ( 'u_max' )
	662	READ ( 13 ) u_max
	663	CASE ( 'u_max_ijk' )
	664	READ ( 13 ) u_max_ijk
	665	CASE ( 'ug' )
	666	READ ( 13 ) ug
	667	CASE ( 'ug_surface' )
	668	READ ( 13 ) ug_surface
	669	CASE ( 'ug_vertical_gradient' )
	670	READ ( 13 ) ug_vertical_gradient
	671	CASE ( 'ug_vertical_gradient_level' )
	672	READ ( 13 ) ug_vertical_gradient_level
	673	CASE ( 'ug_vertical_gradient_level_ind' )
	674	READ ( 13 ) ug_vertical_gradient_level_ind
	675	CASE ( 'use_surface_fluxes' )
	676	READ ( 13 ) use_surface_fluxes
[20]	677	CASE ( 'use_top_fluxes' )
	678	READ ( 13 ) use_top_fluxes
[1]	679	CASE ( 'use_ug_for_galilei_tr' )
	680	READ ( 13 ) use_ug_for_galilei_tr
	681	CASE ( 'use_upstream_for_tke' )
	682	READ ( 13 ) use_upstream_for_tke
[241]	683	CASE ( 'v_bulk' )
	684	READ ( 13 ) v_bulk
[1]	685	CASE ( 'v_init' )
	686	READ ( 13 ) v_init
	687	CASE ( 'v_max' )
	688	READ ( 13 ) v_max
	689	CASE ( 'v_max_ijk' )
	690	READ ( 13 ) v_max_ijk
[1053]	691	CASE ( 'ventilation_effect' )
	692	READ ( 13 ) ventilation_effect
[1]	693	CASE ( 'vg' )
	694	READ ( 13 ) vg
	695	CASE ( 'vg_surface' )
	696	READ ( 13 ) vg_surface
	697	CASE ( 'vg_vertical_gradient' )
	698	READ ( 13 ) vg_vertical_gradient
	699	CASE ( 'vg_vertical_gradient_level' )
	700	READ ( 13 ) vg_vertical_gradient_level
	701	CASE ( 'vg_vertical_gradient_level_ind' )
	702	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	703	CASE ( 'volume_flow_area' )
	704	READ ( 13 ) volume_flow_area
	705	CASE ( 'volume_flow_initial' )
	706	READ ( 13 ) volume_flow_initial
[1]	707	CASE ( 'wall_adjustment' )
	708	READ ( 13 ) wall_adjustment
[580]	709	CASE ( 'subs_vertical_gradient' )
	710	READ ( 13 ) subs_vertical_gradient
	711	CASE ( 'subs_vertical_gradient_level' )
	712	READ ( 13 ) subs_vertical_gradient_level
	713	CASE ( 'subs_vertical_gradient_level_i' )
	714	READ ( 13 ) subs_vertical_gradient_level_i
[1]	715	CASE ( 'w_max' )
	716	READ ( 13 ) w_max
	717	CASE ( 'w_max_ijk' )
	718	READ ( 13 ) w_max_ijk
[1691]	719	CASE ( 'zeta_max' )
	720	READ ( 13 ) zeta_max
	721	CASE ( 'zeta_min' )
	722	READ ( 13 ) zeta_min
[978]	723	CASE ( 'z0h_factor' )
	724	READ ( 13 ) z0h_factor
[1]	725
	726	CASE DEFAULT
[257]	727	WRITE( message_string, * ) 'unknown variable named "', &
	728	TRIM( variable_chr ), '" found in', &
	729	' data from prior run on PE ', myid
	730	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	731	END SELECT
	732	!
	733	!-- Read next string
[1502]	734	WRITE(9,*) 'var1 ', variable_chr
	735	CALL local_flush(9)
[1]	736	READ ( 13 ) variable_chr
[1502]	737	WRITE(9,*) 'var2 ', variable_chr
	738	CALL local_flush(9)
[1]	739
	740	ENDDO
	741
	742
[146]	743	END SUBROUTINE read_var_list
[143]	744
[146]	745
	746
[147]	747	!------------------------------------------------------------------------------!
	748	! Description:
	749	! ------------
[1682]	750	!> Skipping the global control variables from restart-file (binary format)
	751	!> except some information needed when reading restart data from a previous
	752	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	753	!------------------------------------------------------------------------------!
[1682]	754
	755	SUBROUTINE read_parts_of_var_list
[147]	756
[1682]	757
[1320]	758	USE arrays_3d, &
[1484]	759	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1320]	760	q_init, ref_state, sa_init, u_init, ug, v_init, vg
	761
[147]	762	USE control_parameters
[1320]	763
	764	USE indices, &
	765	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	766
	767	USE kinds
	768
[147]	769	USE pegrid
	770
[1320]	771	USE statistics, &
	772	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	773	v_max, v_max_ijk, w_max, w_max_ijk
	774
[147]	775	IMPLICIT NONE
	776
	777	CHARACTER (LEN=10) :: version_on_file
[1521]	778	CHARACTER (LEN=20) :: momentum_advec_check
	779	CHARACTER (LEN=20) :: scalar_advec_check
[147]	780	CHARACTER (LEN=30) :: variable_chr
[626]	781	CHARACTER (LEN=1) :: cdum
[147]	782
[1320]	783	INTEGER(iwp) :: max_pr_user_on_file
	784	INTEGER(iwp) :: nz_on_file
	785	INTEGER(iwp) :: statistic_regions_on_file
	786	INTEGER(iwp) :: tmp_mpru
	787	INTEGER(iwp) :: tmp_sr
[147]	788
[1320]	789	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	790	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	791
	792
	793	CALL check_open( 13 )
	794
	795	WRITE (9,*) 'rpovl: after check open 13'
	796	CALL local_flush( 9 )
	797	READ ( 13 ) version_on_file
	798
	799	!
	800	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	801	!-- run
	802	READ ( 13 ) variable_chr
	803	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	804	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	805	'run on PE ', myid
[257]	806	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	807	ENDIF
	808	READ ( 13 ) numprocs_previous_run
	809
	810	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	811	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	812	ENDIF
	813
	814	READ ( 13 ) variable_chr
	815	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	816	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	817	'prior run on PE ', myid
	818	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	819	ENDIF
	820	READ ( 13 ) hor_index_bounds_previous_run
	821
	822	!
	823	!-- Read vertical number of gridpoints and number of different areas used
	824	!-- for computing statistics. Allocate arrays depending on these values,
	825	!-- which are needed for the following read instructions.
	826	READ ( 13 ) variable_chr
	827	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	828	message_string = 'nz not found in restart data file'
	829	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	830	ENDIF
	831	READ ( 13 ) nz_on_file
	832	IF ( nz_on_file /= nz ) THEN
[257]	833	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	834	'gridpoints along z', &
	835	'&nz on file = "', nz_on_file, '"', &
	836	'&nz from run = "', nz, '"'
[257]	837	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	838	ENDIF
	839
	840	READ ( 13 ) variable_chr
	841	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	842	message_string = 'max_pr_user not found in restart data file'
	843	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	844	ENDIF
	845	READ ( 13 ) max_pr_user_on_file
[170]	846	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	847	WRITE( message_string, * ) 'number of user profiles on res', &
	848	'tart data file differs from the current ', &
	849	'run&max_pr_user on file = "', &
	850	max_pr_user_on_file, '"', &
	851	'&max_pr_user from run = "', &
[257]	852	max_pr_user, '"'
	853	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	854	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	855	ELSE
	856	tmp_mpru = max_pr_user
[147]	857	ENDIF
	858
	859	READ ( 13 ) variable_chr
	860	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	861	message_string = 'statistic_regions not found in restart data file'
	862	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	863	ENDIF
	864	READ ( 13 ) statistic_regions_on_file
[173]	865	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	866	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	867	'differ from the current run', &
	868	'&statistic regions on file = "', &
	869	statistic_regions_on_file, '"', &
	870	'&statistic regions from run = "', &
	871	statistic_regions, '"', &
[257]	872	'&statistic data may be lost!'
	873	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	874	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	875	ELSE
	876	tmp_sr = statistic_regions
[147]	877	ENDIF
	878
	879
	880	!
	881	!-- Now read and check some control parameters and skip the rest
	882	WRITE (9,*) 'wpovl: begin reading variables'
	883	CALL local_flush( 9 )
	884	READ ( 13 ) variable_chr
	885
	886	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	887
	888	SELECT CASE ( TRIM( variable_chr ) )
	889
[151]	890	CASE ( 'average_count_pr' )
	891	READ ( 13 ) average_count_pr
[257]	892	IF ( average_count_pr /= 0 ) THEN
[274]	893	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	894	'averaged. &Averaging will be done now using ', &
	895	average_count_pr, ' samples.'
	896	CALL message( 'read_parts_of_var_list', 'PA0309', &
	897	0, 1, 0, 6, 0 )
[151]	898	ENDIF
	899
[147]	900	CASE ( 'hom' )
	901	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	902	0:statistic_regions_on_file) )
	903	READ ( 13 ) hom_on_file
[170]	904	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	905	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	906	DEALLOCATE( hom_on_file )
	907
[151]	908	CASE ( 'hom_sum' )
	909	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	910	0:statistic_regions_on_file) )
	911	READ ( 13 ) hom_sum_on_file
[170]	912	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	913	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	914	DEALLOCATE( hom_sum_on_file )
	915
[1521]	916	CASE ( 'momentum_advec' )
	917	momentum_advec_check = momentum_advec
	918	READ ( 13 ) momentum_advec
	919	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	920	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	921	'differs from momentum_advec of the initial run.'
	922	CALL message( 'read_parts_of_var_list', 'PA0100', &
	923	1, 2, 0, 6, 0 )
	924	END IF
	925
[147]	926	CASE ( 'nx' )
	927	READ ( 13 ) nx_on_file
	928
	929	CASE ( 'ny' )
	930	READ ( 13 ) ny_on_file
	931
[1253]	932	CASE ( 'ref_state' )
	933	READ ( 13 ) ref_state
[147]	934
[1521]	935	CASE ( 'scalar_advec' )
	936	scalar_advec_check = scalar_advec
	937	READ ( 13 ) scalar_advec
	938	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	939	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	940	'differs from scalar_advec of the initial run.'
	941	CALL message( 'read_parts_of_var_list', 'PA0101', &
	942	1, 2, 0, 6, 0 )
	943	END IF
	944
[147]	945	CASE DEFAULT
	946
[626]	947	READ ( 13 ) cdum
[147]	948
	949	END SELECT
	950
	951	READ ( 13 ) variable_chr
	952
	953	ENDDO
	954
[151]	955	!
	956	!-- Calculate the temporal average of vertical profiles, if neccessary
	957	IF ( average_count_pr /= 0 ) THEN
[1322]	958	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	959	ENDIF
[147]	960
[151]	961
[147]	962	END SUBROUTINE read_parts_of_var_list
	963
	964
	965
[146]	966	!------------------------------------------------------------------------------!
	967	! Description:
	968	! ------------
[1682]	969	!> Skipping the global control variables from restart-file (binary format)
[146]	970	!------------------------------------------------------------------------------!
[1682]	971
	972	SUBROUTINE skip_var_list
[146]	973
[1682]	974
[147]	975	IMPLICIT NONE
	976
[146]	977	CHARACTER (LEN=10) :: version_on_file
	978	CHARACTER (LEN=30) :: variable_chr
	979
[600]	980	CHARACTER (LEN=1) :: cdum
[146]	981
	982
[147]	983	WRITE (9,*) 'skipvl #1'
	984	CALL local_flush( 9 )
[146]	985	READ ( 13 ) version_on_file
	986
[147]	987	WRITE (9,*) 'skipvl before variable_chr'
	988	CALL local_flush( 9 )
[146]	989	READ ( 13 ) variable_chr
[147]	990	WRITE (9,*) 'skipvl after variable_chr'
	991	CALL local_flush( 9 )
[146]	992
	993	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	994
[147]	995	WRITE (9,*) 'skipvl chr = ', variable_chr
	996	CALL local_flush( 9 )
[600]	997	READ ( 13 ) cdum
[146]	998	READ ( 13 ) variable_chr
	999
	1000	ENDDO
[147]	1001	WRITE (9,*) 'skipvl last'
	1002	CALL local_flush( 9 )
[146]	1003
	1004
	1005	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |