Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1295

Last change on this file since 1295 was 1254, checked in by fricke, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 35.2 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[1054]	22	!
[1254]	23	!
[1054]	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 1254 2013-11-07 10:53:19Z raasch $
	27	!
[1254]	28	! 1253 2013-11-07 10:48:12Z fricke
	29	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
	30	! is zero for initializing_actions = 'cyclic_fill'
	31	!
[1242]	32	! 1241 2013-10-30 11:36:58Z heinze
	33	! +nudging
	34	! +large_scale_forcing
	35	!
[1196]	36	! 1195 2013-07-01 12:27:57Z heinze
	37	! Bugfix: allocate ref_state
	38	!
[1182]	39	! 1179 2013-06-14 05:57:58Z raasch
	40	! +ref_state
	41	!
[1116]	42	! 1115 2013-03-26 18:16:16Z hoffmann
	43	! unused variables removed
	44	!
[1093]	45	! 1092 2013-02-02 11:24:22Z raasch
	46	! unused variables removed
	47	!
[1066]	48	! 1065 2012-11-22 17:42:36Z hoffmann
	49	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	50	! -mu_constant, mu_constant_value
	51	!
[1054]	52	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	53	! necessary expansions according to the two new prognostic equations (nr, qr)
	54	! of the two-moment cloud physics scheme:
	55	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	56	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	57	! +surface_waterflux_*
[601]	58	!
[1053]	59	! in addition, steering parameters parameters of the two-moment cloud physics
	60	! scheme:
	61	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	62	!
[1037]	63	! 1036 2012-10-22 13:43:42Z raasch
	64	! code put under GPL (PALM 3.9)
	65	!
[1017]	66	! 1015 2012-09-27 09:23:24Z raasch
	67	! -adjust_mixing_length
	68	!
[1004]	69	! 1003 2012-09-14 14:35:53Z raasch
	70	! -grid_matching
	71	!
[1002]	72	! 1001 2012-09-13 14:08:46Z raasch
	73	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	74	! overshoot_limit_, ups_limit_
	75	!
[979]	76	! 978 2012-08-09 08:28:32Z fricke
	77	! -km_damp_max, outflow_damping_width
	78	! +pt_damping_factor, pt_damping_width
	79	! +z0h_factor
	80	!
[941]	81	! 940 2012-07-09 14:31:00Z raasch
	82	! +neutral
	83	!
[928]	84	! 927 2012-06-06 19:15:04Z raasch
	85	! +masking_method
	86	!
[850]	87	! 849 2012-03-15 10:35:09Z raasch
	88	! first_call_advec_particles renamed first_call_lpm
	89	!
[826]	90	! 824 2012-02-17 09:09:57Z raasch
	91	! +curvature_solution_effects
	92	!
[627]	93	! 626 2010-12-10 13:04:12Z suehring
	94	! idum replaced by cdum in read_parts_of_var_list
	95	!
[623]	96	! 622 2010-12-10 08:08:13Z raasch
	97	! +collective_wait
	98	!
[601]	99	! 600 2010-11-24 16:10:51Z raasch
[600]	100	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
	101	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
	102	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
	103	! in routine skip_var_list (end of this file), variable ldum is replaced
	104	! by cdum(LEN=1), because otherwise read errors (too few data on file)
	105	! appear due to one of the additional parameters (cycle_mg) which are now
	106	! stored on the restart file
[392]	107	!
[592]	108	! 591 2010-10-28 06:35:52Z helmke
	109	! remove print command
	110	!
[588]	111	! 587 2010-10-27 08:36:51Z helmke
	112	! +time_domask
	113	!
[581]	114	! 580 2010-10-05 13:59:11Z heinze
	115	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	116	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	117	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	118	!
[482]	119	! 411 2009-12-11 14:15:58Z heinze
	120	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	121	! ws_vertical_gradient_level_ind
	122	!
[392]	123	! 345 2009-07-01 14:37:56Z heinze
[345]	124	! +output_for_t0
[336]	125	! dt_fixed is read into a dummy variable.
[257]	126	! Output of messages replaced by message handling routine.
[240]	127	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	128	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	129	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	130	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	131	!
[226]	132	! 216 2008-11-25 07:12:43Z raasch
	133	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	134	!
[198]	135	! 173 2008-05-23 20:39:38Z raasch
[153]	136	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	137	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	138	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	139	! recycling_width, turbulent_inflow,
[145]	140	! -cross_ts_*, npex, npey,
	141	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	142	! read_3d_binary to here,
[147]	143	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	144	!
[139]	145	! 138 2007-11-28 10:03:58Z letzel
	146	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	147	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	148	! plant_canopy, time_sort_particles
	149	!
[110]	150	! 102 2007-07-27 09:09:17Z raasch
	151	! +time_coupling, top_momentumflux_u\|v
	152	!
[98]	153	! 95 2007-06-02 16:48:38Z raasch
	154	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	155	! sa_vertical_gradient_level, bottom/top_salinity_flux
	156	!
[90]	157	! 87 2007-05-22 15:46:47Z raasch
	158	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	159	!
[77]	160	! 75 2007-03-22 09:54:05Z raasch
	161	! +loop_optimization, pt_reference, moisture renamed humidity
	162	!
[39]	163	! 20 2007-02-26 00:12:32Z raasch
	164	! +top_heatflux, use_top_fluxes
	165	!
[3]	166	! RCS Log replace by Id keyword, revision history cleaned up
	167	!
[1]	168	! Revision 1.34 2006/08/22 14:14:27 raasch
	169	! +dz_max
	170	!
	171	! Revision 1.1 1998/03/18 20:18:48 raasch
	172	! Initial revision
	173	!
	174	!
	175	! Description:
	176	! ------------
[143]	177	! Reading values of global control variables from restart-file (binary format)
[1]	178	!------------------------------------------------------------------------------!
	179
	180	USE arrays_3d
	181	USE averaging
[824]	182	USE cloud_parameters
[87]	183	USE control_parameters
[1]	184	USE grid_variables
	185	USE indices
	186	USE model_1d
[345]	187	USE netcdf_control
[116]	188	USE particle_attributes
[1]	189	USE pegrid
	190	USE profil_parameter
	191	USE statistics
	192
	193	IMPLICIT NONE
	194
	195	CHARACTER (LEN=10) :: binary_version, version_on_file
	196	CHARACTER (LEN=30) :: variable_chr
[87]	197
[143]	198
[1]	199	CALL check_open( 13 )
	200
	201	!
	202	!-- Make version number check first
	203	READ ( 13 ) version_on_file
[1179]	204	binary_version = '3.9a'
[1]	205	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	206	WRITE( message_string, * ) 'version mismatch concerning control ', &
	207	'variables', &
	208	'&version on file = "', &
	209	TRIM( version_on_file ), '"', &
	210	'&version on program = "', &
	211	TRIM( binary_version ), '"'
	212	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	213	ENDIF
	214
	215	!
[145]	216	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	217	!-- run
	218	READ ( 13 ) variable_chr
	219	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	220	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	221	'run on PE ', myid
[257]	222	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	223	ENDIF
	224	READ ( 13 ) numprocs_previous_run
	225
[146]	226	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	227	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	228	ENDIF
[145]	229
	230	READ ( 13 ) variable_chr
	231	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	232	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	233	'prior run on PE ', myid
	234	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	235	ENDIF
	236	READ ( 13 ) hor_index_bounds_previous_run
	237
	238	!
[1]	239	!-- Read vertical number of gridpoints and number of different areas used
	240	!-- for computing statistics. Allocate arrays depending on these values,
	241	!-- which are needed for the following read instructions.
	242	READ ( 13 ) variable_chr
	243	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	244	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	245	myid
	246	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	247	ENDIF
	248	READ ( 13 ) nz
[87]	249
[1]	250	READ ( 13 ) variable_chr
[87]	251	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	252	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	253	'prior run on PE ', myid
[257]	254	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	255	ENDIF
[159]	256	READ ( 13 ) max_pr_user ! This value is checked against the number of
	257	! user profiles given for the current run
	258	! in routine user_parin (it has to match)
[87]	259
	260	READ ( 13 ) variable_chr
[1]	261	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	262	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	263	'prior run on PE ', myid
[257]	264	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	265	ENDIF
	266	READ ( 13 ) statistic_regions
[146]	267	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	268	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	269	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1195]	270	ref_state(0:nz+1), sa_init(0:nz+1), &
[146]	271	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	272	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	273	ENDIF
[1]	274
	275	!
	276	!-- Now read all control parameters:
	277	!-- Caution: When the following read instructions have been changed, the
	278	!-- ------- version number stored in the variable binary_version has to be
	279	!-- increased. The same changes must also be done in write_var_list.
	280	READ ( 13 ) variable_chr
	281	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	282
	283	SELECT CASE ( TRIM( variable_chr ) )
	284
	285	CASE ( 'advected_distance_x' )
	286	READ ( 13 ) advected_distance_x
	287	CASE ( 'advected_distance_y' )
	288	READ ( 13 ) advected_distance_y
	289	CASE ( 'alpha_surface' )
	290	READ ( 13 ) alpha_surface
	291	CASE ( 'average_count_pr' )
	292	READ ( 13 ) average_count_pr
	293	CASE ( 'average_count_sp' )
	294	READ ( 13 ) average_count_sp
	295	CASE ( 'average_count_3d' )
	296	READ ( 13 ) average_count_3d
	297	CASE ( 'bc_e_b' )
	298	READ ( 13 ) bc_e_b
	299	CASE ( 'bc_lr' )
	300	READ ( 13 ) bc_lr
	301	CASE ( 'bc_ns' )
	302	READ ( 13 ) bc_ns
	303	CASE ( 'bc_p_b' )
	304	READ ( 13 ) bc_p_b
	305	CASE ( 'bc_p_t' )
	306	READ ( 13 ) bc_p_t
	307	CASE ( 'bc_pt_b' )
	308	READ ( 13 ) bc_pt_b
	309	CASE ( 'bc_pt_t' )
	310	READ ( 13 ) bc_pt_t
	311	CASE ( 'bc_pt_t_val' )
	312	READ ( 13 ) bc_pt_t_val
	313	CASE ( 'bc_q_b' )
	314	READ ( 13 ) bc_q_b
	315	CASE ( 'bc_q_t' )
	316	READ ( 13 ) bc_q_t
	317	CASE ( 'bc_q_t_val' )
	318	READ ( 13 ) bc_q_t_val
	319	CASE ( 'bc_s_b' )
	320	READ ( 13 ) bc_s_b
	321	CASE ( 'bc_s_t' )
	322	READ ( 13 ) bc_s_t
[95]	323	CASE ( 'bc_sa_t' )
	324	READ ( 13 ) bc_sa_t
[1]	325	CASE ( 'bc_uv_b' )
	326	READ ( 13 ) bc_uv_b
	327	CASE ( 'bc_uv_t' )
	328	READ ( 13 ) bc_uv_t
[95]	329	CASE ( 'bottom_salinityflux' )
	330	READ ( 13 ) bottom_salinityflux
[1]	331	CASE ( 'building_height' )
	332	READ ( 13 ) building_height
	333	CASE ( 'building_length_x' )
	334	READ ( 13 ) building_length_x
	335	CASE ( 'building_length_y' )
	336	READ ( 13 ) building_length_y
	337	CASE ( 'building_wall_left' )
	338	READ ( 13 ) building_wall_left
	339	CASE ( 'building_wall_south' )
	340	READ ( 13 ) building_wall_south
[600]	341	CASE ( 'call_psolver_at_all_substeps' )
	342	READ ( 13 ) call_psolver_at_all_substeps
[138]	343	CASE ( 'canopy_mode' )
	344	READ ( 13 ) canopy_mode
[240]	345	CASE ( 'canyon_height' )
	346	READ ( 13 ) canyon_height
	347	CASE ( 'canyon_width_x' )
	348	READ ( 13 ) canyon_width_x
	349	CASE ( 'canyon_width_y' )
	350	READ ( 13 ) canyon_width_y
	351	CASE ( 'canyon_wall_left' )
	352	READ ( 13 ) canyon_wall_left
	353	CASE ( 'canyon_wall_south' )
	354	READ ( 13 ) canyon_wall_south
[1065]	355	CASE ( 'c_sedimentation' )
	356	READ ( 13 ) c_sedimentation
[600]	357	CASE ( 'cfl_factor' )
	358	READ ( 13 ) cfl_factor
[1]	359	CASE ( 'cloud_droplets' )
	360	READ ( 13 ) cloud_droplets
	361	CASE ( 'cloud_physics' )
	362	READ ( 13 ) cloud_physics
[1053]	363	CASE ( 'cloud_scheme' )
	364	READ ( 13 ) cloud_scheme
[622]	365	CASE ( 'collective_wait' )
	366	READ ( 13 ) collective_wait
[1]	367	CASE ( 'conserve_volume_flow' )
	368	READ ( 13 ) conserve_volume_flow
[241]	369	CASE ( 'conserve_volume_flow_mode' )
	370	READ ( 13 ) conserve_volume_flow_mode
[291]	371	CASE ( 'coupling_start_time' )
	372	READ ( 13 ) coupling_start_time
[153]	373	CASE ( 'cthf' )
	374	READ ( 13 ) cthf
[1]	375	CASE ( 'current_timestep_number' )
	376	READ ( 13 ) current_timestep_number
[824]	377	CASE ( 'curvature_solution_effects' )
	378	READ ( 13 ) curvature_solution_effects
[600]	379	CASE ( 'cycle_mg' )
	380	READ ( 13 ) cycle_mg
[1]	381	CASE ( 'damp_level_1d' )
	382	READ ( 13 ) damp_level_1d
	383	CASE ( 'dissipation_1d' )
	384	READ ( 13 ) dissipation_1d
[240]	385	CASE ( 'dp_external' )
	386	READ ( 13 ) dp_external
	387	CASE ( 'dp_level_b' )
	388	READ ( 13 ) dp_level_b
	389	CASE ( 'dp_smooth' )
	390	READ ( 13 ) dp_smooth
	391	CASE ( 'dpdxy' )
	392	READ ( 13 ) dpdxy
[138]	393	CASE ( 'drag_coefficient' )
	394	READ ( 13 ) drag_coefficient
[1053]	395	CASE ( 'drizzle' )
	396	READ ( 13 ) drizzle
[1]	397	CASE ( 'dt_pr_1d' )
	398	READ ( 13 ) dt_pr_1d
	399	CASE ( 'dt_run_control_1d' )
	400	READ ( 13 ) dt_run_control_1d
	401	CASE ( 'dt_3d' )
	402	READ ( 13 ) dt_3d
	403	CASE ( 'dvrp_filecount' )
	404	READ ( 13 ) dvrp_filecount
	405	CASE ( 'dx' )
	406	READ ( 13 ) dx
	407	CASE ( 'dy' )
	408	READ ( 13 ) dy
	409	CASE ( 'dz' )
	410	READ ( 13 ) dz
	411	CASE ( 'dz_max' )
	412	READ ( 13 ) dz_max
	413	CASE ( 'dz_stretch_factor' )
	414	READ ( 13 ) dz_stretch_factor
	415	CASE ( 'dz_stretch_level' )
	416	READ ( 13 ) dz_stretch_level
	417	CASE ( 'e_min' )
	418	READ ( 13 ) e_min
	419	CASE ( 'end_time_1d' )
	420	READ ( 13 ) end_time_1d
	421	CASE ( 'fft_method' )
	422	READ ( 13 ) fft_method
[849]	423	CASE ( 'first_call_lpm' )
	424	READ ( 13 ) first_call_lpm
[1]	425	CASE ( 'galilei_transformation' )
	426	READ ( 13 ) galilei_transformation
	427	CASE ( 'hom' )
	428	READ ( 13 ) hom
[143]	429	CASE ( 'hom_sum' )
	430	READ ( 13 ) hom_sum
[151]	431	CASE ( 'humidity' )
	432	READ ( 13 ) humidity
	433	CASE ( 'inflow_damping_factor' )
	434	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	435	ALLOCATE( inflow_damping_factor(0:nz+1) )
	436	ENDIF
	437	READ ( 13 ) inflow_damping_factor
	438	CASE ( 'inflow_damping_height' )
	439	READ ( 13 ) inflow_damping_height
	440	CASE ( 'inflow_damping_width' )
	441	READ ( 13 ) inflow_damping_width
[1]	442	CASE ( 'inflow_disturbance_begin' )
	443	READ ( 13 ) inflow_disturbance_begin
	444	CASE ( 'inflow_disturbance_end' )
	445	READ ( 13 ) inflow_disturbance_end
	446	CASE ( 'km_constant' )
	447	READ ( 13 ) km_constant
[138]	448	CASE ( 'lad' )
	449	READ ( 13 ) lad
	450	CASE ( 'lad_surface' )
	451	READ ( 13 ) lad_surface
	452	CASE ( 'lad_vertical_gradient' )
	453	READ ( 13 ) lad_vertical_gradient
	454	CASE ( 'lad_vertical_gradient_level' )
	455	READ ( 13 ) lad_vertical_gradient_level
	456	CASE ( 'lad_vertical_gradient_level_in' )
	457	READ ( 13 ) lad_vertical_gradient_level_ind
[1241]	458	CASE ( 'large_scale_forcing' )
	459	READ ( 13 ) large_scale_forcing
[411]	460	CASE ( 'large_scale_subsidence' )
	461	READ ( 13 ) large_scale_subsidence
[153]	462	CASE ( 'leaf_surface_concentration' )
	463	READ ( 13 ) leaf_surface_concentration
[1065]	464	CASE ( 'limiter_sedimentation' )
	465	READ ( 13 ) limiter_sedimentation
[63]	466	CASE ( 'loop_optimization' )
	467	READ ( 13 ) loop_optimization
[927]	468	CASE ( 'masking_method' )
	469	READ ( 13 ) masking_method
[151]	470	CASE ( 'mean_inflow_profiles' )
	471	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	472	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	473	ENDIF
	474	READ ( 13 ) mean_inflow_profiles
[600]	475	CASE ( 'mg_cycles' )
	476	READ ( 13 ) mg_cycles
	477	CASE ( 'mg_switch_to_pe0_level' )
	478	READ ( 13 ) mg_switch_to_pe0_level
[1]	479	CASE ( 'mixing_length_1d' )
	480	READ ( 13 ) mixing_length_1d
	481	CASE ( 'momentum_advec' )
	482	READ ( 13 ) momentum_advec
[1115]	483	CASE ( 'nc_const' )
	484	READ ( 13 ) nc_const
[1]	485	CASE ( 'netcdf_precision' )
	486	READ ( 13 ) netcdf_precision
[940]	487	CASE ( 'neutral' )
	488	READ ( 13 ) neutral
[600]	489	CASE ( 'ngsrb' )
	490	READ ( 13 ) ngsrb
	491	CASE ( 'nsor' )
	492	READ ( 13 ) nsor
[1]	493	CASE ( 'nsor_ini' )
	494	READ ( 13 ) nsor_ini
[1241]	495	CASE ( 'nudging' )
	496	READ ( 13 ) nudging
[1]	497	CASE ( 'nx' )
	498	READ ( 13 ) nx
[147]	499	nx_on_file = nx
[1]	500	CASE ( 'ny' )
	501	READ ( 13 ) ny
[147]	502	ny_on_file = ny
[94]	503	CASE ( 'ocean' )
	504	READ ( 13 ) ocean
[1]	505	CASE ( 'old_dt' )
	506	READ ( 13 ) old_dt
	507	CASE ( 'omega' )
	508	READ ( 13 ) omega
[600]	509	CASE ( 'omega_sor' )
	510	READ ( 13 ) omega_sor
[345]	511	CASE ( 'output_for_t0' )
	512	READ (13) output_for_t0
[1]	513	CASE ( 'passive_scalar' )
	514	READ ( 13 ) passive_scalar
[138]	515	CASE ( 'pch_index' )
	516	READ ( 13 ) pch_index
[1]	517	CASE ( 'phi' )
	518	READ ( 13 ) phi
[138]	519	CASE ( 'plant_canopy' )
	520	READ ( 13 ) plant_canopy
[1]	521	CASE ( 'prandtl_layer' )
	522	READ ( 13 ) prandtl_layer
[600]	523	CASE ( 'prandtl_number' )
	524	READ ( 13 ) prandtl_number
[1]	525	CASE ( 'precipitation' )
	526	READ ( 13 ) precipitation
[600]	527	CASE ( 'psolver' )
	528	READ ( 13 ) psolver
[978]	529	CASE ( 'pt_damping_factor' )
	530	READ ( 13 ) pt_damping_factor
	531	CASE ( 'pt_damping_width' )
	532	READ ( 13 ) pt_damping_width
[1]	533	CASE ( 'pt_init' )
	534	READ ( 13 ) pt_init
[57]	535	CASE ( 'pt_reference' )
	536	READ ( 13 ) pt_reference
[1]	537	CASE ( 'pt_surface' )
	538	READ ( 13 ) pt_surface
	539	CASE ( 'pt_surface_initial_change' )
	540	READ ( 13 ) pt_surface_initial_change
	541	CASE ( 'pt_vertical_gradient' )
	542	READ ( 13 ) pt_vertical_gradient
	543	CASE ( 'pt_vertical_gradient_level' )
	544	READ ( 13 ) pt_vertical_gradient_level
	545	CASE ( 'pt_vertical_gradient_level_ind' )
	546	READ ( 13 ) pt_vertical_gradient_level_ind
	547	CASE ( 'q_init' )
	548	READ ( 13 ) q_init
	549	CASE ( 'q_surface' )
	550	READ ( 13 ) q_surface
	551	CASE ( 'q_surface_initial_change' )
	552	READ ( 13 ) q_surface_initial_change
	553	CASE ( 'q_vertical_gradient' )
	554	READ ( 13 ) q_vertical_gradient
	555	CASE ( 'q_vertical_gradient_level' )
	556	READ ( 13 ) q_vertical_gradient_level
	557	CASE ( 'q_vertical_gradient_level_ind' )
	558	READ ( 13 ) q_vertical_gradient_level_ind
	559	CASE ( 'radiation' )
	560	READ ( 13 ) radiation
	561	CASE ( 'random_generator' )
	562	READ ( 13 ) random_generator
	563	CASE ( 'random_heatflux' )
	564	READ ( 13 ) random_heatflux
[600]	565	CASE ( 'rayleigh_damping_factor' )
	566	READ ( 13 ) rayleigh_damping_factor
	567	CASE ( 'rayleigh_damping_height' )
	568	READ ( 13 ) rayleigh_damping_height
[151]	569	CASE ( 'recycling_width' )
	570	READ ( 13 ) recycling_width
[1179]	571	CASE ( 'reference_state' )
	572	READ ( 13 ) reference_state
	573	CASE ( 'ref_state' )
	574	READ ( 13 ) ref_state
[600]	575	CASE ( 'residual_limit' )
	576	READ ( 13 ) residual_limit
[1]	577	CASE ( 'rif_max' )
	578	READ ( 13 ) rif_max
	579	CASE ( 'rif_min' )
	580	READ ( 13 ) rif_min
	581	CASE ( 'roughness_length' )
	582	READ ( 13 ) roughness_length
	583	CASE ( 'runnr' )
	584	READ ( 13 ) runnr
[291]	585	CASE ( 'run_coupled' )
	586	READ ( 13 ) run_coupled
[94]	587	CASE ( 'sa_init' )
	588	READ ( 13 ) sa_init
	589	CASE ( 'sa_surface' )
	590	READ ( 13 ) sa_surface
	591	CASE ( 'sa_vertical_gradient' )
	592	READ ( 13 ) sa_vertical_gradient
	593	CASE ( 'sa_vertical_gradient_level' )
	594	READ ( 13 ) sa_vertical_gradient_level
[1]	595	CASE ( 'scalar_advec' )
	596	READ ( 13 ) scalar_advec
[153]	597	CASE ( 'scalar_exchange_coefficient' )
	598	READ ( 13 ) scalar_exchange_coefficient
[1]	599	CASE ( 'simulated_time' )
	600	READ ( 13 ) simulated_time
	601	CASE ( 'surface_heatflux' )
	602	READ ( 13 ) surface_heatflux
	603	CASE ( 'surface_pressure' )
	604	READ ( 13 ) surface_pressure
	605	CASE ( 'surface_scalarflux' )
	606	READ ( 13 ) surface_scalarflux
	607	CASE ( 'surface_waterflux' )
[1053]	608	READ ( 13 ) surface_waterflux
[1]	609	CASE ( 's_surface' )
	610	READ ( 13 ) s_surface
	611	CASE ( 's_surface_initial_change' )
	612	READ ( 13 ) s_surface_initial_change
	613	CASE ( 's_vertical_gradient' )
	614	READ ( 13 ) s_vertical_gradient
	615	CASE ( 's_vertical_gradient_level' )
	616	READ ( 13 ) s_vertical_gradient_level
[102]	617	CASE ( 'time_coupling' )
	618	READ ( 13 ) time_coupling
[1]	619	CASE ( 'time_disturb' )
	620	READ ( 13 ) time_disturb
[587]	621	CASE ( 'time_dopr' )
[1]	622	READ ( 13 ) time_dopr
[587]	623	CASE ( 'time_domask' )
	624	READ ( 13 ) time_domask
[1]	625	CASE ( 'time_dopr_av' )
	626	READ ( 13 ) time_dopr_av
	627	CASE ( 'time_dopr_listing' )
	628	READ ( 13 ) time_dopr_listing
	629	CASE ( 'time_dopts' )
	630	READ ( 13 ) time_dopts
	631	CASE ( 'time_dosp' )
	632	READ ( 13 ) time_dosp
	633	CASE ( 'time_dots' )
	634	READ ( 13 ) time_dots
	635	CASE ( 'time_do2d_xy' )
	636	READ ( 13 ) time_do2d_xy
	637	CASE ( 'time_do2d_xz' )
	638	READ ( 13 ) time_do2d_xz
	639	CASE ( 'time_do2d_yz' )
	640	READ ( 13 ) time_do2d_yz
	641	CASE ( 'time_do3d' )
	642	READ ( 13 ) time_do3d
	643	CASE ( 'time_do_av' )
	644	READ ( 13 ) time_do_av
	645	CASE ( 'time_do_sla' )
	646	READ ( 13 ) time_do_sla
	647	CASE ( 'time_dvrp' )
	648	READ ( 13 ) time_dvrp
	649	CASE ( 'time_restart' )
	650	READ ( 13 ) time_restart
	651	CASE ( 'time_run_control' )
	652	READ ( 13 ) time_run_control
[291]	653	CASE ( 'time_since_reference_point' )
	654	READ ( 13 ) time_since_reference_point
[116]	655	CASE ( 'time_sort_particles' )
	656	READ ( 13 ) time_sort_particles
[1]	657	CASE ( 'timestep_scheme' )
	658	READ ( 13 ) timestep_scheme
	659	CASE ( 'topography' )
	660	READ ( 13 ) topography
[256]	661	CASE ( 'topography_grid_convention' )
	662	READ ( 13 ) topography_grid_convention
[19]	663	CASE ( 'top_heatflux' )
	664	READ ( 13 ) top_heatflux
[102]	665	CASE ( 'top_momentumflux_u' )
	666	READ ( 13 ) top_momentumflux_u
	667	CASE ( 'top_momentumflux_v' )
	668	READ ( 13 ) top_momentumflux_v
[94]	669	CASE ( 'top_salinityflux' )
	670	READ ( 13 ) top_salinityflux
[1]	671	CASE ( 'tsc' )
	672	READ ( 13 ) tsc
[1065]	673	CASE ( 'turbulence' )
	674	READ ( 13 ) turbulence
[151]	675	CASE ( 'turbulent_inflow' )
	676	READ ( 13 ) turbulent_inflow
[241]	677	CASE ( 'u_bulk' )
	678	READ ( 13 ) u_bulk
[1]	679	CASE ( 'u_init' )
	680	READ ( 13 ) u_init
	681	CASE ( 'u_max' )
	682	READ ( 13 ) u_max
	683	CASE ( 'u_max_ijk' )
	684	READ ( 13 ) u_max_ijk
	685	CASE ( 'ug' )
	686	READ ( 13 ) ug
	687	CASE ( 'ug_surface' )
	688	READ ( 13 ) ug_surface
	689	CASE ( 'ug_vertical_gradient' )
	690	READ ( 13 ) ug_vertical_gradient
	691	CASE ( 'ug_vertical_gradient_level' )
	692	READ ( 13 ) ug_vertical_gradient_level
	693	CASE ( 'ug_vertical_gradient_level_ind' )
	694	READ ( 13 ) ug_vertical_gradient_level_ind
	695	CASE ( 'use_surface_fluxes' )
	696	READ ( 13 ) use_surface_fluxes
[20]	697	CASE ( 'use_top_fluxes' )
	698	READ ( 13 ) use_top_fluxes
[1]	699	CASE ( 'use_ug_for_galilei_tr' )
	700	READ ( 13 ) use_ug_for_galilei_tr
	701	CASE ( 'use_upstream_for_tke' )
	702	READ ( 13 ) use_upstream_for_tke
[241]	703	CASE ( 'v_bulk' )
	704	READ ( 13 ) v_bulk
[1]	705	CASE ( 'v_init' )
	706	READ ( 13 ) v_init
	707	CASE ( 'v_max' )
	708	READ ( 13 ) v_max
	709	CASE ( 'v_max_ijk' )
	710	READ ( 13 ) v_max_ijk
[1053]	711	CASE ( 'ventilation_effect' )
	712	READ ( 13 ) ventilation_effect
[1]	713	CASE ( 'vg' )
	714	READ ( 13 ) vg
	715	CASE ( 'vg_surface' )
	716	READ ( 13 ) vg_surface
	717	CASE ( 'vg_vertical_gradient' )
	718	READ ( 13 ) vg_vertical_gradient
	719	CASE ( 'vg_vertical_gradient_level' )
	720	READ ( 13 ) vg_vertical_gradient_level
	721	CASE ( 'vg_vertical_gradient_level_ind' )
	722	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	723	CASE ( 'volume_flow_area' )
	724	READ ( 13 ) volume_flow_area
	725	CASE ( 'volume_flow_initial' )
	726	READ ( 13 ) volume_flow_initial
[1]	727	CASE ( 'wall_adjustment' )
	728	READ ( 13 ) wall_adjustment
[580]	729	CASE ( 'subs_vertical_gradient' )
	730	READ ( 13 ) subs_vertical_gradient
	731	CASE ( 'subs_vertical_gradient_level' )
	732	READ ( 13 ) subs_vertical_gradient_level
	733	CASE ( 'subs_vertical_gradient_level_i' )
	734	READ ( 13 ) subs_vertical_gradient_level_i
[1]	735	CASE ( 'w_max' )
	736	READ ( 13 ) w_max
	737	CASE ( 'w_max_ijk' )
	738	READ ( 13 ) w_max_ijk
[978]	739	CASE ( 'z0h_factor' )
	740	READ ( 13 ) z0h_factor
[1]	741
	742	CASE DEFAULT
[257]	743	WRITE( message_string, * ) 'unknown variable named "', &
	744	TRIM( variable_chr ), '" found in', &
	745	' data from prior run on PE ', myid
	746	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	747	END SELECT
	748	!
	749	!-- Read next string
	750	READ ( 13 ) variable_chr
	751
	752	ENDDO
	753
	754
[146]	755	END SUBROUTINE read_var_list
[143]	756
[146]	757
	758
[147]	759	SUBROUTINE read_parts_of_var_list
	760
	761	!------------------------------------------------------------------------------!
	762	! Description:
	763	! ------------
	764	! Skipping the global control variables from restart-file (binary format)
	765	! except some informations needed when reading restart data from a previous
[151]	766	! run which used a smaller total domain or/and a different domain decomposition.
[147]	767	!------------------------------------------------------------------------------!
	768
[151]	769	USE arrays_3d
[147]	770	USE control_parameters
	771	USE indices
	772	USE pegrid
	773	USE statistics
	774
	775	IMPLICIT NONE
	776
	777	CHARACTER (LEN=10) :: version_on_file
	778	CHARACTER (LEN=30) :: variable_chr
[626]	779	CHARACTER (LEN=1) :: cdum
[147]	780
[1092]	781	INTEGER :: max_pr_user_on_file, nz_on_file, &
[170]	782	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	783
[151]	784	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	785	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	786
	787
	788	CALL check_open( 13 )
	789
	790	WRITE (9,*) 'rpovl: after check open 13'
	791	CALL local_flush( 9 )
	792	READ ( 13 ) version_on_file
	793
	794	!
	795	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	796	!-- run
	797	READ ( 13 ) variable_chr
	798	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	799	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	800	'run on PE ', myid
[257]	801	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	802	ENDIF
	803	READ ( 13 ) numprocs_previous_run
	804
	805	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	806	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	807	ENDIF
	808
	809	READ ( 13 ) variable_chr
	810	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	811	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	812	'prior run on PE ', myid
	813	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	814	ENDIF
	815	READ ( 13 ) hor_index_bounds_previous_run
	816
	817	!
	818	!-- Read vertical number of gridpoints and number of different areas used
	819	!-- for computing statistics. Allocate arrays depending on these values,
	820	!-- which are needed for the following read instructions.
	821	READ ( 13 ) variable_chr
	822	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	823	message_string = 'nz not found in restart data file'
	824	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	825	ENDIF
	826	READ ( 13 ) nz_on_file
	827	IF ( nz_on_file /= nz ) THEN
[257]	828	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	829	'gridpoints along z', &
	830	'&nz on file = "', nz_on_file, '"', &
	831	'&nz from run = "', nz, '"'
[257]	832	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	833	ENDIF
	834
	835	READ ( 13 ) variable_chr
	836	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	837	message_string = 'max_pr_user not found in restart data file'
	838	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	839	ENDIF
	840	READ ( 13 ) max_pr_user_on_file
[170]	841	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	842	WRITE( message_string, * ) 'number of user profiles on res', &
	843	'tart data file differs from the current ', &
	844	'run&max_pr_user on file = "', &
	845	max_pr_user_on_file, '"', &
	846	'&max_pr_user from run = "', &
[257]	847	max_pr_user, '"'
	848	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	849	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	850	ELSE
	851	tmp_mpru = max_pr_user
[147]	852	ENDIF
	853
	854	READ ( 13 ) variable_chr
	855	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	856	message_string = 'statistic_regions not found in restart data file'
	857	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	858	ENDIF
	859	READ ( 13 ) statistic_regions_on_file
[173]	860	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	861	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	862	'differ from the current run', &
	863	'&statistic regions on file = "', &
	864	statistic_regions_on_file, '"', &
	865	'&statistic regions from run = "', &
	866	statistic_regions, '"', &
[257]	867	'&statistic data may be lost!'
	868	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	869	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	870	ELSE
	871	tmp_sr = statistic_regions
[147]	872	ENDIF
	873
	874
	875	!
	876	!-- Now read and check some control parameters and skip the rest
	877	WRITE (9,*) 'wpovl: begin reading variables'
	878	CALL local_flush( 9 )
	879	READ ( 13 ) variable_chr
	880
	881	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	882
	883	SELECT CASE ( TRIM( variable_chr ) )
	884
[151]	885	CASE ( 'average_count_pr' )
	886	READ ( 13 ) average_count_pr
[257]	887	IF ( average_count_pr /= 0 ) THEN
[274]	888	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	889	'averaged. &Averaging will be done now using ', &
	890	average_count_pr, ' samples.'
	891	CALL message( 'read_parts_of_var_list', 'PA0309', &
	892	0, 1, 0, 6, 0 )
[151]	893	ENDIF
	894
[147]	895	CASE ( 'hom' )
	896	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	897	0:statistic_regions_on_file) )
	898	READ ( 13 ) hom_on_file
[170]	899	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	900	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	901	DEALLOCATE( hom_on_file )
	902
[151]	903	CASE ( 'hom_sum' )
	904	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	905	0:statistic_regions_on_file) )
	906	READ ( 13 ) hom_sum_on_file
[170]	907	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	908	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	909	DEALLOCATE( hom_sum_on_file )
	910
[147]	911	CASE ( 'nx' )
	912	READ ( 13 ) nx_on_file
	913
	914	CASE ( 'ny' )
	915	READ ( 13 ) ny_on_file
	916
[1253]	917	CASE ( 'ref_state' )
	918	READ ( 13 ) ref_state
[147]	919
[1253]	920
[147]	921	CASE DEFAULT
	922
[626]	923	READ ( 13 ) cdum
[147]	924
	925	END SELECT
	926
	927	READ ( 13 ) variable_chr
	928
	929	ENDDO
	930
[151]	931	!
	932	!-- Calculate the temporal average of vertical profiles, if neccessary
	933	IF ( average_count_pr /= 0 ) THEN
	934	hom_sum = hom_sum / REAL( average_count_pr )
	935	ENDIF
[147]	936
[151]	937
[147]	938	END SUBROUTINE read_parts_of_var_list
	939
	940
	941
[146]	942	SUBROUTINE skip_var_list
	943
	944	!------------------------------------------------------------------------------!
	945	! Description:
	946	! ------------
	947	! Skipping the global control variables from restart-file (binary format)
	948	!------------------------------------------------------------------------------!
	949
[147]	950	IMPLICIT NONE
	951
[146]	952	CHARACTER (LEN=10) :: version_on_file
	953	CHARACTER (LEN=30) :: variable_chr
	954
[600]	955	CHARACTER (LEN=1) :: cdum
[146]	956
	957
[147]	958	WRITE (9,*) 'skipvl #1'
	959	CALL local_flush( 9 )
[146]	960	READ ( 13 ) version_on_file
	961
[147]	962	WRITE (9,*) 'skipvl before variable_chr'
	963	CALL local_flush( 9 )
[146]	964	READ ( 13 ) variable_chr
[147]	965	WRITE (9,*) 'skipvl after variable_chr'
	966	CALL local_flush( 9 )
[146]	967
	968	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	969
[147]	970	WRITE (9,*) 'skipvl chr = ', variable_chr
	971	CALL local_flush( 9 )
[600]	972	READ ( 13 ) cdum
[146]	973	READ ( 13 ) variable_chr
	974
	975	ENDDO
[147]	976	WRITE (9,*) 'skipvl last'
	977	CALL local_flush( 9 )
[146]	978
	979
	980	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |