Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1184

Last change on this file since 1184 was 1182, checked in by raasch, 11 years ago
last commit documented, rc-file for example run updated
Property svn:keywords set to `Id`
File size: 34.7 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[1054]	22	!
[1182]	23	!
[1054]	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 1182 2013-06-14 09:07:24Z heinze $
	27	!
[1182]	28	! 1179 2013-06-14 05:57:58Z raasch
	29	! +ref_state
	30	!
[1116]	31	! 1115 2013-03-26 18:16:16Z hoffmann
	32	! unused variables removed
	33	!
[1093]	34	! 1092 2013-02-02 11:24:22Z raasch
	35	! unused variables removed
	36	!
[1066]	37	! 1065 2012-11-22 17:42:36Z hoffmann
	38	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	39	! -mu_constant, mu_constant_value
	40	!
[1054]	41	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	42	! necessary expansions according to the two new prognostic equations (nr, qr)
	43	! of the two-moment cloud physics scheme:
	44	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	45	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	46	! +surface_waterflux_*
[601]	47	!
[1053]	48	! in addition, steering parameters parameters of the two-moment cloud physics
	49	! scheme:
	50	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	51	!
[1037]	52	! 1036 2012-10-22 13:43:42Z raasch
	53	! code put under GPL (PALM 3.9)
	54	!
[1017]	55	! 1015 2012-09-27 09:23:24Z raasch
	56	! -adjust_mixing_length
	57	!
[1004]	58	! 1003 2012-09-14 14:35:53Z raasch
	59	! -grid_matching
	60	!
[1002]	61	! 1001 2012-09-13 14:08:46Z raasch
	62	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	63	! overshoot_limit_, ups_limit_
	64	!
[979]	65	! 978 2012-08-09 08:28:32Z fricke
	66	! -km_damp_max, outflow_damping_width
	67	! +pt_damping_factor, pt_damping_width
	68	! +z0h_factor
	69	!
[941]	70	! 940 2012-07-09 14:31:00Z raasch
	71	! +neutral
	72	!
[928]	73	! 927 2012-06-06 19:15:04Z raasch
	74	! +masking_method
	75	!
[850]	76	! 849 2012-03-15 10:35:09Z raasch
	77	! first_call_advec_particles renamed first_call_lpm
	78	!
[826]	79	! 824 2012-02-17 09:09:57Z raasch
	80	! +curvature_solution_effects
	81	!
[627]	82	! 626 2010-12-10 13:04:12Z suehring
	83	! idum replaced by cdum in read_parts_of_var_list
	84	!
[623]	85	! 622 2010-12-10 08:08:13Z raasch
	86	! +collective_wait
	87	!
[601]	88	! 600 2010-11-24 16:10:51Z raasch
[600]	89	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
	90	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
	91	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
	92	! in routine skip_var_list (end of this file), variable ldum is replaced
	93	! by cdum(LEN=1), because otherwise read errors (too few data on file)
	94	! appear due to one of the additional parameters (cycle_mg) which are now
	95	! stored on the restart file
[392]	96	!
[592]	97	! 591 2010-10-28 06:35:52Z helmke
	98	! remove print command
	99	!
[588]	100	! 587 2010-10-27 08:36:51Z helmke
	101	! +time_domask
	102	!
[581]	103	! 580 2010-10-05 13:59:11Z heinze
	104	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	105	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	106	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	107	!
[482]	108	! 411 2009-12-11 14:15:58Z heinze
	109	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	110	! ws_vertical_gradient_level_ind
	111	!
[392]	112	! 345 2009-07-01 14:37:56Z heinze
[345]	113	! +output_for_t0
[336]	114	! dt_fixed is read into a dummy variable.
[257]	115	! Output of messages replaced by message handling routine.
[240]	116	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	117	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	118	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	119	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	120	!
[226]	121	! 216 2008-11-25 07:12:43Z raasch
	122	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	123	!
[198]	124	! 173 2008-05-23 20:39:38Z raasch
[153]	125	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	126	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	127	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	128	! recycling_width, turbulent_inflow,
[145]	129	! -cross_ts_*, npex, npey,
	130	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	131	! read_3d_binary to here,
[147]	132	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	133	!
[139]	134	! 138 2007-11-28 10:03:58Z letzel
	135	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	136	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	137	! plant_canopy, time_sort_particles
	138	!
[110]	139	! 102 2007-07-27 09:09:17Z raasch
	140	! +time_coupling, top_momentumflux_u\|v
	141	!
[98]	142	! 95 2007-06-02 16:48:38Z raasch
	143	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	144	! sa_vertical_gradient_level, bottom/top_salinity_flux
	145	!
[90]	146	! 87 2007-05-22 15:46:47Z raasch
	147	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	148	!
[77]	149	! 75 2007-03-22 09:54:05Z raasch
	150	! +loop_optimization, pt_reference, moisture renamed humidity
	151	!
[39]	152	! 20 2007-02-26 00:12:32Z raasch
	153	! +top_heatflux, use_top_fluxes
	154	!
[3]	155	! RCS Log replace by Id keyword, revision history cleaned up
	156	!
[1]	157	! Revision 1.34 2006/08/22 14:14:27 raasch
	158	! +dz_max
	159	!
	160	! Revision 1.1 1998/03/18 20:18:48 raasch
	161	! Initial revision
	162	!
	163	!
	164	! Description:
	165	! ------------
[143]	166	! Reading values of global control variables from restart-file (binary format)
[1]	167	!------------------------------------------------------------------------------!
	168
	169	USE arrays_3d
	170	USE averaging
[824]	171	USE cloud_parameters
[87]	172	USE control_parameters
[1]	173	USE grid_variables
	174	USE indices
	175	USE model_1d
[345]	176	USE netcdf_control
[116]	177	USE particle_attributes
[1]	178	USE pegrid
	179	USE profil_parameter
	180	USE statistics
	181
	182	IMPLICIT NONE
	183
	184	CHARACTER (LEN=10) :: binary_version, version_on_file
	185	CHARACTER (LEN=30) :: variable_chr
[87]	186
[143]	187
[1]	188	CALL check_open( 13 )
	189
	190	!
	191	!-- Make version number check first
	192	READ ( 13 ) version_on_file
[1179]	193	binary_version = '3.9a'
[1]	194	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	195	WRITE( message_string, * ) 'version mismatch concerning control ', &
	196	'variables', &
	197	'&version on file = "', &
	198	TRIM( version_on_file ), '"', &
	199	'&version on program = "', &
	200	TRIM( binary_version ), '"'
	201	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	202	ENDIF
	203
	204	!
[145]	205	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	206	!-- run
	207	READ ( 13 ) variable_chr
	208	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	209	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	210	'run on PE ', myid
[257]	211	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	212	ENDIF
	213	READ ( 13 ) numprocs_previous_run
	214
[146]	215	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	216	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	217	ENDIF
[145]	218
	219	READ ( 13 ) variable_chr
	220	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	221	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	222	'prior run on PE ', myid
	223	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	224	ENDIF
	225	READ ( 13 ) hor_index_bounds_previous_run
	226
	227	!
[1]	228	!-- Read vertical number of gridpoints and number of different areas used
	229	!-- for computing statistics. Allocate arrays depending on these values,
	230	!-- which are needed for the following read instructions.
	231	READ ( 13 ) variable_chr
	232	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	233	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	234	myid
	235	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	236	ENDIF
	237	READ ( 13 ) nz
[87]	238
[1]	239	READ ( 13 ) variable_chr
[87]	240	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	241	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	242	'prior run on PE ', myid
[257]	243	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	244	ENDIF
[159]	245	READ ( 13 ) max_pr_user ! This value is checked against the number of
	246	! user profiles given for the current run
	247	! in routine user_parin (it has to match)
[87]	248
	249	READ ( 13 ) variable_chr
[1]	250	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	251	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	252	'prior run on PE ', myid
[257]	253	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	254	ENDIF
	255	READ ( 13 ) statistic_regions
[146]	256	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	257	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	258	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1115]	259	sa_init(0:nz+1), &
[146]	260	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	261	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	262	ENDIF
[1]	263
	264	!
	265	!-- Now read all control parameters:
	266	!-- Caution: When the following read instructions have been changed, the
	267	!-- ------- version number stored in the variable binary_version has to be
	268	!-- increased. The same changes must also be done in write_var_list.
	269	READ ( 13 ) variable_chr
	270	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	271
	272	SELECT CASE ( TRIM( variable_chr ) )
	273
	274	CASE ( 'advected_distance_x' )
	275	READ ( 13 ) advected_distance_x
	276	CASE ( 'advected_distance_y' )
	277	READ ( 13 ) advected_distance_y
	278	CASE ( 'alpha_surface' )
	279	READ ( 13 ) alpha_surface
	280	CASE ( 'average_count_pr' )
	281	READ ( 13 ) average_count_pr
	282	CASE ( 'average_count_sp' )
	283	READ ( 13 ) average_count_sp
	284	CASE ( 'average_count_3d' )
	285	READ ( 13 ) average_count_3d
	286	CASE ( 'bc_e_b' )
	287	READ ( 13 ) bc_e_b
	288	CASE ( 'bc_lr' )
	289	READ ( 13 ) bc_lr
	290	CASE ( 'bc_ns' )
	291	READ ( 13 ) bc_ns
	292	CASE ( 'bc_p_b' )
	293	READ ( 13 ) bc_p_b
	294	CASE ( 'bc_p_t' )
	295	READ ( 13 ) bc_p_t
	296	CASE ( 'bc_pt_b' )
	297	READ ( 13 ) bc_pt_b
	298	CASE ( 'bc_pt_t' )
	299	READ ( 13 ) bc_pt_t
	300	CASE ( 'bc_pt_t_val' )
	301	READ ( 13 ) bc_pt_t_val
	302	CASE ( 'bc_q_b' )
	303	READ ( 13 ) bc_q_b
	304	CASE ( 'bc_q_t' )
	305	READ ( 13 ) bc_q_t
	306	CASE ( 'bc_q_t_val' )
	307	READ ( 13 ) bc_q_t_val
	308	CASE ( 'bc_s_b' )
	309	READ ( 13 ) bc_s_b
	310	CASE ( 'bc_s_t' )
	311	READ ( 13 ) bc_s_t
[95]	312	CASE ( 'bc_sa_t' )
	313	READ ( 13 ) bc_sa_t
[1]	314	CASE ( 'bc_uv_b' )
	315	READ ( 13 ) bc_uv_b
	316	CASE ( 'bc_uv_t' )
	317	READ ( 13 ) bc_uv_t
[95]	318	CASE ( 'bottom_salinityflux' )
	319	READ ( 13 ) bottom_salinityflux
[1]	320	CASE ( 'building_height' )
	321	READ ( 13 ) building_height
	322	CASE ( 'building_length_x' )
	323	READ ( 13 ) building_length_x
	324	CASE ( 'building_length_y' )
	325	READ ( 13 ) building_length_y
	326	CASE ( 'building_wall_left' )
	327	READ ( 13 ) building_wall_left
	328	CASE ( 'building_wall_south' )
	329	READ ( 13 ) building_wall_south
[600]	330	CASE ( 'call_psolver_at_all_substeps' )
	331	READ ( 13 ) call_psolver_at_all_substeps
[138]	332	CASE ( 'canopy_mode' )
	333	READ ( 13 ) canopy_mode
[240]	334	CASE ( 'canyon_height' )
	335	READ ( 13 ) canyon_height
	336	CASE ( 'canyon_width_x' )
	337	READ ( 13 ) canyon_width_x
	338	CASE ( 'canyon_width_y' )
	339	READ ( 13 ) canyon_width_y
	340	CASE ( 'canyon_wall_left' )
	341	READ ( 13 ) canyon_wall_left
	342	CASE ( 'canyon_wall_south' )
	343	READ ( 13 ) canyon_wall_south
[1065]	344	CASE ( 'c_sedimentation' )
	345	READ ( 13 ) c_sedimentation
[600]	346	CASE ( 'cfl_factor' )
	347	READ ( 13 ) cfl_factor
[1]	348	CASE ( 'cloud_droplets' )
	349	READ ( 13 ) cloud_droplets
	350	CASE ( 'cloud_physics' )
	351	READ ( 13 ) cloud_physics
[1053]	352	CASE ( 'cloud_scheme' )
	353	READ ( 13 ) cloud_scheme
[622]	354	CASE ( 'collective_wait' )
	355	READ ( 13 ) collective_wait
[1]	356	CASE ( 'conserve_volume_flow' )
	357	READ ( 13 ) conserve_volume_flow
[241]	358	CASE ( 'conserve_volume_flow_mode' )
	359	READ ( 13 ) conserve_volume_flow_mode
[291]	360	CASE ( 'coupling_start_time' )
	361	READ ( 13 ) coupling_start_time
[153]	362	CASE ( 'cthf' )
	363	READ ( 13 ) cthf
[1]	364	CASE ( 'current_timestep_number' )
	365	READ ( 13 ) current_timestep_number
[824]	366	CASE ( 'curvature_solution_effects' )
	367	READ ( 13 ) curvature_solution_effects
[600]	368	CASE ( 'cycle_mg' )
	369	READ ( 13 ) cycle_mg
[1]	370	CASE ( 'damp_level_1d' )
	371	READ ( 13 ) damp_level_1d
	372	CASE ( 'dissipation_1d' )
	373	READ ( 13 ) dissipation_1d
[240]	374	CASE ( 'dp_external' )
	375	READ ( 13 ) dp_external
	376	CASE ( 'dp_level_b' )
	377	READ ( 13 ) dp_level_b
	378	CASE ( 'dp_smooth' )
	379	READ ( 13 ) dp_smooth
	380	CASE ( 'dpdxy' )
	381	READ ( 13 ) dpdxy
[138]	382	CASE ( 'drag_coefficient' )
	383	READ ( 13 ) drag_coefficient
[1053]	384	CASE ( 'drizzle' )
	385	READ ( 13 ) drizzle
[1]	386	CASE ( 'dt_pr_1d' )
	387	READ ( 13 ) dt_pr_1d
	388	CASE ( 'dt_run_control_1d' )
	389	READ ( 13 ) dt_run_control_1d
	390	CASE ( 'dt_3d' )
	391	READ ( 13 ) dt_3d
	392	CASE ( 'dvrp_filecount' )
	393	READ ( 13 ) dvrp_filecount
	394	CASE ( 'dx' )
	395	READ ( 13 ) dx
	396	CASE ( 'dy' )
	397	READ ( 13 ) dy
	398	CASE ( 'dz' )
	399	READ ( 13 ) dz
	400	CASE ( 'dz_max' )
	401	READ ( 13 ) dz_max
	402	CASE ( 'dz_stretch_factor' )
	403	READ ( 13 ) dz_stretch_factor
	404	CASE ( 'dz_stretch_level' )
	405	READ ( 13 ) dz_stretch_level
	406	CASE ( 'e_min' )
	407	READ ( 13 ) e_min
	408	CASE ( 'end_time_1d' )
	409	READ ( 13 ) end_time_1d
	410	CASE ( 'fft_method' )
	411	READ ( 13 ) fft_method
[849]	412	CASE ( 'first_call_lpm' )
	413	READ ( 13 ) first_call_lpm
[1]	414	CASE ( 'galilei_transformation' )
	415	READ ( 13 ) galilei_transformation
	416	CASE ( 'hom' )
	417	READ ( 13 ) hom
[143]	418	CASE ( 'hom_sum' )
	419	READ ( 13 ) hom_sum
[151]	420	CASE ( 'humidity' )
	421	READ ( 13 ) humidity
	422	CASE ( 'inflow_damping_factor' )
	423	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	424	ALLOCATE( inflow_damping_factor(0:nz+1) )
	425	ENDIF
	426	READ ( 13 ) inflow_damping_factor
	427	CASE ( 'inflow_damping_height' )
	428	READ ( 13 ) inflow_damping_height
	429	CASE ( 'inflow_damping_width' )
	430	READ ( 13 ) inflow_damping_width
[1]	431	CASE ( 'inflow_disturbance_begin' )
	432	READ ( 13 ) inflow_disturbance_begin
	433	CASE ( 'inflow_disturbance_end' )
	434	READ ( 13 ) inflow_disturbance_end
	435	CASE ( 'km_constant' )
	436	READ ( 13 ) km_constant
[138]	437	CASE ( 'lad' )
	438	READ ( 13 ) lad
	439	CASE ( 'lad_surface' )
	440	READ ( 13 ) lad_surface
	441	CASE ( 'lad_vertical_gradient' )
	442	READ ( 13 ) lad_vertical_gradient
	443	CASE ( 'lad_vertical_gradient_level' )
	444	READ ( 13 ) lad_vertical_gradient_level
	445	CASE ( 'lad_vertical_gradient_level_in' )
	446	READ ( 13 ) lad_vertical_gradient_level_ind
[411]	447	CASE ( 'large_scale_subsidence' )
	448	READ ( 13 ) large_scale_subsidence
[153]	449	CASE ( 'leaf_surface_concentration' )
	450	READ ( 13 ) leaf_surface_concentration
[1065]	451	CASE ( 'limiter_sedimentation' )
	452	READ ( 13 ) limiter_sedimentation
[63]	453	CASE ( 'loop_optimization' )
	454	READ ( 13 ) loop_optimization
[927]	455	CASE ( 'masking_method' )
	456	READ ( 13 ) masking_method
[151]	457	CASE ( 'mean_inflow_profiles' )
	458	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	459	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	460	ENDIF
	461	READ ( 13 ) mean_inflow_profiles
[600]	462	CASE ( 'mg_cycles' )
	463	READ ( 13 ) mg_cycles
	464	CASE ( 'mg_switch_to_pe0_level' )
	465	READ ( 13 ) mg_switch_to_pe0_level
[1]	466	CASE ( 'mixing_length_1d' )
	467	READ ( 13 ) mixing_length_1d
	468	CASE ( 'momentum_advec' )
	469	READ ( 13 ) momentum_advec
[1115]	470	CASE ( 'nc_const' )
	471	READ ( 13 ) nc_const
[1]	472	CASE ( 'netcdf_precision' )
	473	READ ( 13 ) netcdf_precision
[940]	474	CASE ( 'neutral' )
	475	READ ( 13 ) neutral
[600]	476	CASE ( 'ngsrb' )
	477	READ ( 13 ) ngsrb
	478	CASE ( 'nsor' )
	479	READ ( 13 ) nsor
[1]	480	CASE ( 'nsor_ini' )
	481	READ ( 13 ) nsor_ini
	482	CASE ( 'nx' )
	483	READ ( 13 ) nx
[147]	484	nx_on_file = nx
[1]	485	CASE ( 'ny' )
	486	READ ( 13 ) ny
[147]	487	ny_on_file = ny
[94]	488	CASE ( 'ocean' )
	489	READ ( 13 ) ocean
[1]	490	CASE ( 'old_dt' )
	491	READ ( 13 ) old_dt
	492	CASE ( 'omega' )
	493	READ ( 13 ) omega
[600]	494	CASE ( 'omega_sor' )
	495	READ ( 13 ) omega_sor
[345]	496	CASE ( 'output_for_t0' )
	497	READ (13) output_for_t0
[1]	498	CASE ( 'passive_scalar' )
	499	READ ( 13 ) passive_scalar
[138]	500	CASE ( 'pch_index' )
	501	READ ( 13 ) pch_index
[1]	502	CASE ( 'phi' )
	503	READ ( 13 ) phi
[138]	504	CASE ( 'plant_canopy' )
	505	READ ( 13 ) plant_canopy
[1]	506	CASE ( 'prandtl_layer' )
	507	READ ( 13 ) prandtl_layer
[600]	508	CASE ( 'prandtl_number' )
	509	READ ( 13 ) prandtl_number
[1]	510	CASE ( 'precipitation' )
	511	READ ( 13 ) precipitation
[600]	512	CASE ( 'psolver' )
	513	READ ( 13 ) psolver
[978]	514	CASE ( 'pt_damping_factor' )
	515	READ ( 13 ) pt_damping_factor
	516	CASE ( 'pt_damping_width' )
	517	READ ( 13 ) pt_damping_width
[1]	518	CASE ( 'pt_init' )
	519	READ ( 13 ) pt_init
[57]	520	CASE ( 'pt_reference' )
	521	READ ( 13 ) pt_reference
[1]	522	CASE ( 'pt_surface' )
	523	READ ( 13 ) pt_surface
	524	CASE ( 'pt_surface_initial_change' )
	525	READ ( 13 ) pt_surface_initial_change
	526	CASE ( 'pt_vertical_gradient' )
	527	READ ( 13 ) pt_vertical_gradient
	528	CASE ( 'pt_vertical_gradient_level' )
	529	READ ( 13 ) pt_vertical_gradient_level
	530	CASE ( 'pt_vertical_gradient_level_ind' )
	531	READ ( 13 ) pt_vertical_gradient_level_ind
	532	CASE ( 'q_init' )
	533	READ ( 13 ) q_init
	534	CASE ( 'q_surface' )
	535	READ ( 13 ) q_surface
	536	CASE ( 'q_surface_initial_change' )
	537	READ ( 13 ) q_surface_initial_change
	538	CASE ( 'q_vertical_gradient' )
	539	READ ( 13 ) q_vertical_gradient
	540	CASE ( 'q_vertical_gradient_level' )
	541	READ ( 13 ) q_vertical_gradient_level
	542	CASE ( 'q_vertical_gradient_level_ind' )
	543	READ ( 13 ) q_vertical_gradient_level_ind
	544	CASE ( 'radiation' )
	545	READ ( 13 ) radiation
	546	CASE ( 'random_generator' )
	547	READ ( 13 ) random_generator
	548	CASE ( 'random_heatflux' )
	549	READ ( 13 ) random_heatflux
[600]	550	CASE ( 'rayleigh_damping_factor' )
	551	READ ( 13 ) rayleigh_damping_factor
	552	CASE ( 'rayleigh_damping_height' )
	553	READ ( 13 ) rayleigh_damping_height
[151]	554	CASE ( 'recycling_width' )
	555	READ ( 13 ) recycling_width
[1179]	556	CASE ( 'reference_state' )
	557	READ ( 13 ) reference_state
	558	CASE ( 'ref_state' )
	559	READ ( 13 ) ref_state
[600]	560	CASE ( 'residual_limit' )
	561	READ ( 13 ) residual_limit
[1]	562	CASE ( 'rif_max' )
	563	READ ( 13 ) rif_max
	564	CASE ( 'rif_min' )
	565	READ ( 13 ) rif_min
	566	CASE ( 'roughness_length' )
	567	READ ( 13 ) roughness_length
	568	CASE ( 'runnr' )
	569	READ ( 13 ) runnr
[291]	570	CASE ( 'run_coupled' )
	571	READ ( 13 ) run_coupled
[94]	572	CASE ( 'sa_init' )
	573	READ ( 13 ) sa_init
	574	CASE ( 'sa_surface' )
	575	READ ( 13 ) sa_surface
	576	CASE ( 'sa_vertical_gradient' )
	577	READ ( 13 ) sa_vertical_gradient
	578	CASE ( 'sa_vertical_gradient_level' )
	579	READ ( 13 ) sa_vertical_gradient_level
[1]	580	CASE ( 'scalar_advec' )
	581	READ ( 13 ) scalar_advec
[153]	582	CASE ( 'scalar_exchange_coefficient' )
	583	READ ( 13 ) scalar_exchange_coefficient
[1]	584	CASE ( 'simulated_time' )
	585	READ ( 13 ) simulated_time
	586	CASE ( 'surface_heatflux' )
	587	READ ( 13 ) surface_heatflux
	588	CASE ( 'surface_pressure' )
	589	READ ( 13 ) surface_pressure
	590	CASE ( 'surface_scalarflux' )
	591	READ ( 13 ) surface_scalarflux
	592	CASE ( 'surface_waterflux' )
[1053]	593	READ ( 13 ) surface_waterflux
[1]	594	CASE ( 's_surface' )
	595	READ ( 13 ) s_surface
	596	CASE ( 's_surface_initial_change' )
	597	READ ( 13 ) s_surface_initial_change
	598	CASE ( 's_vertical_gradient' )
	599	READ ( 13 ) s_vertical_gradient
	600	CASE ( 's_vertical_gradient_level' )
	601	READ ( 13 ) s_vertical_gradient_level
[102]	602	CASE ( 'time_coupling' )
	603	READ ( 13 ) time_coupling
[1]	604	CASE ( 'time_disturb' )
	605	READ ( 13 ) time_disturb
[587]	606	CASE ( 'time_dopr' )
[1]	607	READ ( 13 ) time_dopr
[587]	608	CASE ( 'time_domask' )
	609	READ ( 13 ) time_domask
[1]	610	CASE ( 'time_dopr_av' )
	611	READ ( 13 ) time_dopr_av
	612	CASE ( 'time_dopr_listing' )
	613	READ ( 13 ) time_dopr_listing
	614	CASE ( 'time_dopts' )
	615	READ ( 13 ) time_dopts
	616	CASE ( 'time_dosp' )
	617	READ ( 13 ) time_dosp
	618	CASE ( 'time_dots' )
	619	READ ( 13 ) time_dots
	620	CASE ( 'time_do2d_xy' )
	621	READ ( 13 ) time_do2d_xy
	622	CASE ( 'time_do2d_xz' )
	623	READ ( 13 ) time_do2d_xz
	624	CASE ( 'time_do2d_yz' )
	625	READ ( 13 ) time_do2d_yz
	626	CASE ( 'time_do3d' )
	627	READ ( 13 ) time_do3d
	628	CASE ( 'time_do_av' )
	629	READ ( 13 ) time_do_av
	630	CASE ( 'time_do_sla' )
	631	READ ( 13 ) time_do_sla
	632	CASE ( 'time_dvrp' )
	633	READ ( 13 ) time_dvrp
	634	CASE ( 'time_restart' )
	635	READ ( 13 ) time_restart
	636	CASE ( 'time_run_control' )
	637	READ ( 13 ) time_run_control
[291]	638	CASE ( 'time_since_reference_point' )
	639	READ ( 13 ) time_since_reference_point
[116]	640	CASE ( 'time_sort_particles' )
	641	READ ( 13 ) time_sort_particles
[1]	642	CASE ( 'timestep_scheme' )
	643	READ ( 13 ) timestep_scheme
	644	CASE ( 'topography' )
	645	READ ( 13 ) topography
[256]	646	CASE ( 'topography_grid_convention' )
	647	READ ( 13 ) topography_grid_convention
[19]	648	CASE ( 'top_heatflux' )
	649	READ ( 13 ) top_heatflux
[102]	650	CASE ( 'top_momentumflux_u' )
	651	READ ( 13 ) top_momentumflux_u
	652	CASE ( 'top_momentumflux_v' )
	653	READ ( 13 ) top_momentumflux_v
[94]	654	CASE ( 'top_salinityflux' )
	655	READ ( 13 ) top_salinityflux
[1]	656	CASE ( 'tsc' )
	657	READ ( 13 ) tsc
[1065]	658	CASE ( 'turbulence' )
	659	READ ( 13 ) turbulence
[151]	660	CASE ( 'turbulent_inflow' )
	661	READ ( 13 ) turbulent_inflow
[241]	662	CASE ( 'u_bulk' )
	663	READ ( 13 ) u_bulk
[1]	664	CASE ( 'u_init' )
	665	READ ( 13 ) u_init
	666	CASE ( 'u_max' )
	667	READ ( 13 ) u_max
	668	CASE ( 'u_max_ijk' )
	669	READ ( 13 ) u_max_ijk
	670	CASE ( 'ug' )
	671	READ ( 13 ) ug
	672	CASE ( 'ug_surface' )
	673	READ ( 13 ) ug_surface
	674	CASE ( 'ug_vertical_gradient' )
	675	READ ( 13 ) ug_vertical_gradient
	676	CASE ( 'ug_vertical_gradient_level' )
	677	READ ( 13 ) ug_vertical_gradient_level
	678	CASE ( 'ug_vertical_gradient_level_ind' )
	679	READ ( 13 ) ug_vertical_gradient_level_ind
	680	CASE ( 'use_surface_fluxes' )
	681	READ ( 13 ) use_surface_fluxes
[20]	682	CASE ( 'use_top_fluxes' )
	683	READ ( 13 ) use_top_fluxes
[1]	684	CASE ( 'use_ug_for_galilei_tr' )
	685	READ ( 13 ) use_ug_for_galilei_tr
	686	CASE ( 'use_upstream_for_tke' )
	687	READ ( 13 ) use_upstream_for_tke
[241]	688	CASE ( 'v_bulk' )
	689	READ ( 13 ) v_bulk
[1]	690	CASE ( 'v_init' )
	691	READ ( 13 ) v_init
	692	CASE ( 'v_max' )
	693	READ ( 13 ) v_max
	694	CASE ( 'v_max_ijk' )
	695	READ ( 13 ) v_max_ijk
[1053]	696	CASE ( 'ventilation_effect' )
	697	READ ( 13 ) ventilation_effect
[1]	698	CASE ( 'vg' )
	699	READ ( 13 ) vg
	700	CASE ( 'vg_surface' )
	701	READ ( 13 ) vg_surface
	702	CASE ( 'vg_vertical_gradient' )
	703	READ ( 13 ) vg_vertical_gradient
	704	CASE ( 'vg_vertical_gradient_level' )
	705	READ ( 13 ) vg_vertical_gradient_level
	706	CASE ( 'vg_vertical_gradient_level_ind' )
	707	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	708	CASE ( 'volume_flow_area' )
	709	READ ( 13 ) volume_flow_area
	710	CASE ( 'volume_flow_initial' )
	711	READ ( 13 ) volume_flow_initial
[1]	712	CASE ( 'wall_adjustment' )
	713	READ ( 13 ) wall_adjustment
[580]	714	CASE ( 'subs_vertical_gradient' )
	715	READ ( 13 ) subs_vertical_gradient
	716	CASE ( 'subs_vertical_gradient_level' )
	717	READ ( 13 ) subs_vertical_gradient_level
	718	CASE ( 'subs_vertical_gradient_level_i' )
	719	READ ( 13 ) subs_vertical_gradient_level_i
[1]	720	CASE ( 'w_max' )
	721	READ ( 13 ) w_max
	722	CASE ( 'w_max_ijk' )
	723	READ ( 13 ) w_max_ijk
[978]	724	CASE ( 'z0h_factor' )
	725	READ ( 13 ) z0h_factor
[1]	726
	727	CASE DEFAULT
[257]	728	WRITE( message_string, * ) 'unknown variable named "', &
	729	TRIM( variable_chr ), '" found in', &
	730	' data from prior run on PE ', myid
	731	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	732	END SELECT
	733	!
	734	!-- Read next string
	735	READ ( 13 ) variable_chr
	736
	737	ENDDO
	738
	739
[146]	740	END SUBROUTINE read_var_list
[143]	741
[146]	742
	743
[147]	744	SUBROUTINE read_parts_of_var_list
	745
	746	!------------------------------------------------------------------------------!
	747	! Description:
	748	! ------------
	749	! Skipping the global control variables from restart-file (binary format)
	750	! except some informations needed when reading restart data from a previous
[151]	751	! run which used a smaller total domain or/and a different domain decomposition.
[147]	752	!------------------------------------------------------------------------------!
	753
[151]	754	USE arrays_3d
[147]	755	USE control_parameters
	756	USE indices
	757	USE pegrid
	758	USE statistics
	759
	760	IMPLICIT NONE
	761
	762	CHARACTER (LEN=10) :: version_on_file
	763	CHARACTER (LEN=30) :: variable_chr
[626]	764	CHARACTER (LEN=1) :: cdum
[147]	765
[1092]	766	INTEGER :: max_pr_user_on_file, nz_on_file, &
[170]	767	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	768
[151]	769	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	770	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	771
	772
	773	CALL check_open( 13 )
	774
	775	WRITE (9,*) 'rpovl: after check open 13'
	776	CALL local_flush( 9 )
	777	READ ( 13 ) version_on_file
	778
	779	!
	780	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	781	!-- run
	782	READ ( 13 ) variable_chr
	783	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	784	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	785	'run on PE ', myid
[257]	786	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	787	ENDIF
	788	READ ( 13 ) numprocs_previous_run
	789
	790	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	791	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	792	ENDIF
	793
	794	READ ( 13 ) variable_chr
	795	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	796	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	797	'prior run on PE ', myid
	798	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	799	ENDIF
	800	READ ( 13 ) hor_index_bounds_previous_run
	801
	802	!
	803	!-- Read vertical number of gridpoints and number of different areas used
	804	!-- for computing statistics. Allocate arrays depending on these values,
	805	!-- which are needed for the following read instructions.
	806	READ ( 13 ) variable_chr
	807	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	808	message_string = 'nz not found in restart data file'
	809	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	810	ENDIF
	811	READ ( 13 ) nz_on_file
	812	IF ( nz_on_file /= nz ) THEN
[257]	813	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	814	'gridpoints along z', &
	815	'&nz on file = "', nz_on_file, '"', &
	816	'&nz from run = "', nz, '"'
[257]	817	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	818	ENDIF
	819
	820	READ ( 13 ) variable_chr
	821	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	822	message_string = 'max_pr_user not found in restart data file'
	823	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	824	ENDIF
	825	READ ( 13 ) max_pr_user_on_file
[170]	826	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	827	WRITE( message_string, * ) 'number of user profiles on res', &
	828	'tart data file differs from the current ', &
	829	'run&max_pr_user on file = "', &
	830	max_pr_user_on_file, '"', &
	831	'&max_pr_user from run = "', &
[257]	832	max_pr_user, '"'
	833	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	834	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	835	ELSE
	836	tmp_mpru = max_pr_user
[147]	837	ENDIF
	838
	839	READ ( 13 ) variable_chr
	840	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	841	message_string = 'statistic_regions not found in restart data file'
	842	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	843	ENDIF
	844	READ ( 13 ) statistic_regions_on_file
[173]	845	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	846	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	847	'differ from the current run', &
	848	'&statistic regions on file = "', &
	849	statistic_regions_on_file, '"', &
	850	'&statistic regions from run = "', &
	851	statistic_regions, '"', &
[257]	852	'&statistic data may be lost!'
	853	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	854	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	855	ELSE
	856	tmp_sr = statistic_regions
[147]	857	ENDIF
	858
	859
	860	!
	861	!-- Now read and check some control parameters and skip the rest
	862	WRITE (9,*) 'wpovl: begin reading variables'
	863	CALL local_flush( 9 )
	864	READ ( 13 ) variable_chr
	865
	866	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	867
	868	SELECT CASE ( TRIM( variable_chr ) )
	869
[151]	870	CASE ( 'average_count_pr' )
	871	READ ( 13 ) average_count_pr
[257]	872	IF ( average_count_pr /= 0 ) THEN
[274]	873	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	874	'averaged. &Averaging will be done now using ', &
	875	average_count_pr, ' samples.'
	876	CALL message( 'read_parts_of_var_list', 'PA0309', &
	877	0, 1, 0, 6, 0 )
[151]	878	ENDIF
	879
[147]	880	CASE ( 'hom' )
	881	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	882	0:statistic_regions_on_file) )
	883	READ ( 13 ) hom_on_file
[170]	884	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	885	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	886	DEALLOCATE( hom_on_file )
	887
[151]	888	CASE ( 'hom_sum' )
	889	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	890	0:statistic_regions_on_file) )
	891	READ ( 13 ) hom_sum_on_file
[170]	892	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	893	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	894	DEALLOCATE( hom_sum_on_file )
	895
[147]	896	CASE ( 'nx' )
	897	READ ( 13 ) nx_on_file
	898
	899	CASE ( 'ny' )
	900	READ ( 13 ) ny_on_file
	901
	902
	903	CASE DEFAULT
	904
[626]	905	READ ( 13 ) cdum
[147]	906
	907	END SELECT
	908
	909	READ ( 13 ) variable_chr
	910
	911	ENDDO
	912
[151]	913	!
	914	!-- Calculate the temporal average of vertical profiles, if neccessary
	915	IF ( average_count_pr /= 0 ) THEN
	916	hom_sum = hom_sum / REAL( average_count_pr )
	917	ENDIF
[147]	918
[151]	919
[147]	920	END SUBROUTINE read_parts_of_var_list
	921
	922
	923
[146]	924	SUBROUTINE skip_var_list
	925
	926	!------------------------------------------------------------------------------!
	927	! Description:
	928	! ------------
	929	! Skipping the global control variables from restart-file (binary format)
	930	!------------------------------------------------------------------------------!
	931
[147]	932	IMPLICIT NONE
	933
[146]	934	CHARACTER (LEN=10) :: version_on_file
	935	CHARACTER (LEN=30) :: variable_chr
	936
[600]	937	CHARACTER (LEN=1) :: cdum
[146]	938
	939
[147]	940	WRITE (9,*) 'skipvl #1'
	941	CALL local_flush( 9 )
[146]	942	READ ( 13 ) version_on_file
	943
[147]	944	WRITE (9,*) 'skipvl before variable_chr'
	945	CALL local_flush( 9 )
[146]	946	READ ( 13 ) variable_chr
[147]	947	WRITE (9,*) 'skipvl after variable_chr'
	948	CALL local_flush( 9 )
[146]	949
	950	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	951
[147]	952	WRITE (9,*) 'skipvl chr = ', variable_chr
	953	CALL local_flush( 9 )
[600]	954	READ ( 13 ) cdum
[146]	955	READ ( 13 ) variable_chr
	956
	957	ENDDO
[147]	958	WRITE (9,*) 'skipvl last'
	959	CALL local_flush( 9 )
[146]	960
	961
	962	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |