Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1062

Last change on this file since 1062 was 1054, checked in by hoffmann, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 35.7 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 1997-2012 Leibniz University Hannover
	18	!--------------------------------------------------------------------------------!
	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[1054]	22	!
	23	! Former revisions:
	24	! -----------------
	25	! $Id: read_var_list.f90 1054 2012-11-13 17:30:09Z maronga $
	26	!
	27	! 1053 2012-11-13 17:11:03Z hoffmann
[1053]	28	! necessary expansions according to the two new prognostic equations (nr, qr)
	29	! of the two-moment cloud physics scheme:
	30	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	31	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	32	! +surface_waterflux_*
[601]	33	!
[1053]	34	! in addition, steering parameters parameters of the two-moment cloud physics
	35	! scheme:
	36	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	37	!
[1037]	38	! 1036 2012-10-22 13:43:42Z raasch
	39	! code put under GPL (PALM 3.9)
	40	!
[1017]	41	! 1015 2012-09-27 09:23:24Z raasch
	42	! -adjust_mixing_length
	43	!
[1004]	44	! 1003 2012-09-14 14:35:53Z raasch
	45	! -grid_matching
	46	!
[1002]	47	! 1001 2012-09-13 14:08:46Z raasch
	48	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	49	! overshoot_limit_, ups_limit_
	50	!
[979]	51	! 978 2012-08-09 08:28:32Z fricke
	52	! -km_damp_max, outflow_damping_width
	53	! +pt_damping_factor, pt_damping_width
	54	! +z0h_factor
	55	!
[941]	56	! 940 2012-07-09 14:31:00Z raasch
	57	! +neutral
	58	!
[928]	59	! 927 2012-06-06 19:15:04Z raasch
	60	! +masking_method
	61	!
[850]	62	! 849 2012-03-15 10:35:09Z raasch
	63	! first_call_advec_particles renamed first_call_lpm
	64	!
[826]	65	! 824 2012-02-17 09:09:57Z raasch
	66	! +curvature_solution_effects
	67	!
[627]	68	! 626 2010-12-10 13:04:12Z suehring
	69	! idum replaced by cdum in read_parts_of_var_list
	70	!
[623]	71	! 622 2010-12-10 08:08:13Z raasch
	72	! +collective_wait
	73	!
[601]	74	! 600 2010-11-24 16:10:51Z raasch
[600]	75	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
	76	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
	77	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
	78	! in routine skip_var_list (end of this file), variable ldum is replaced
	79	! by cdum(LEN=1), because otherwise read errors (too few data on file)
	80	! appear due to one of the additional parameters (cycle_mg) which are now
	81	! stored on the restart file
[392]	82	!
[592]	83	! 591 2010-10-28 06:35:52Z helmke
	84	! remove print command
	85	!
[588]	86	! 587 2010-10-27 08:36:51Z helmke
	87	! +time_domask
	88	!
[581]	89	! 580 2010-10-05 13:59:11Z heinze
	90	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	91	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	92	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	93	!
[482]	94	! 411 2009-12-11 14:15:58Z heinze
	95	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	96	! ws_vertical_gradient_level_ind
	97	!
[392]	98	! 345 2009-07-01 14:37:56Z heinze
[345]	99	! +output_for_t0
[336]	100	! dt_fixed is read into a dummy variable.
[257]	101	! Output of messages replaced by message handling routine.
[240]	102	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	103	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	104	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	105	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	106	!
[226]	107	! 216 2008-11-25 07:12:43Z raasch
	108	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	109	!
[198]	110	! 173 2008-05-23 20:39:38Z raasch
[153]	111	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	112	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	113	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	114	! recycling_width, turbulent_inflow,
[145]	115	! -cross_ts_*, npex, npey,
	116	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	117	! read_3d_binary to here,
[147]	118	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	119	!
[139]	120	! 138 2007-11-28 10:03:58Z letzel
	121	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	122	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	123	! plant_canopy, time_sort_particles
	124	!
[110]	125	! 102 2007-07-27 09:09:17Z raasch
	126	! +time_coupling, top_momentumflux_u\|v
	127	!
[98]	128	! 95 2007-06-02 16:48:38Z raasch
	129	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	130	! sa_vertical_gradient_level, bottom/top_salinity_flux
	131	!
[90]	132	! 87 2007-05-22 15:46:47Z raasch
	133	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	134	!
[77]	135	! 75 2007-03-22 09:54:05Z raasch
	136	! +loop_optimization, pt_reference, moisture renamed humidity
	137	!
[39]	138	! 20 2007-02-26 00:12:32Z raasch
	139	! +top_heatflux, use_top_fluxes
	140	!
[3]	141	! RCS Log replace by Id keyword, revision history cleaned up
	142	!
[1]	143	! Revision 1.34 2006/08/22 14:14:27 raasch
	144	! +dz_max
	145	!
	146	! Revision 1.1 1998/03/18 20:18:48 raasch
	147	! Initial revision
	148	!
	149	!
	150	! Description:
	151	! ------------
[143]	152	! Reading values of global control variables from restart-file (binary format)
[1]	153	!------------------------------------------------------------------------------!
	154
	155	USE arrays_3d
	156	USE averaging
[824]	157	USE cloud_parameters
[87]	158	USE control_parameters
[1]	159	USE grid_variables
	160	USE indices
	161	USE model_1d
[345]	162	USE netcdf_control
[116]	163	USE particle_attributes
[1]	164	USE pegrid
	165	USE profil_parameter
	166	USE statistics
	167
	168	IMPLICIT NONE
	169
	170	CHARACTER (LEN=10) :: binary_version, version_on_file
	171	CHARACTER (LEN=30) :: variable_chr
[87]	172
[336]	173	LOGICAL :: ldum
[143]	174
[336]	175
[1]	176	CALL check_open( 13 )
	177
	178	!
	179	!-- Make version number check first
	180	READ ( 13 ) version_on_file
[1053]	181	binary_version = '3.6'
[1]	182	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	183	WRITE( message_string, * ) 'version mismatch concerning control ', &
	184	'variables', &
	185	'&version on file = "', &
	186	TRIM( version_on_file ), '"', &
	187	'&version on program = "', &
	188	TRIM( binary_version ), '"'
	189	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	190	ENDIF
	191
	192	!
[145]	193	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	194	!-- run
	195	READ ( 13 ) variable_chr
	196	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	197	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	198	'run on PE ', myid
[257]	199	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	200	ENDIF
	201	READ ( 13 ) numprocs_previous_run
	202
[146]	203	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	204	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	205	ENDIF
[145]	206
	207	READ ( 13 ) variable_chr
	208	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	209	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	210	'prior run on PE ', myid
	211	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	212	ENDIF
	213	READ ( 13 ) hor_index_bounds_previous_run
	214
	215	!
[1]	216	!-- Read vertical number of gridpoints and number of different areas used
	217	!-- for computing statistics. Allocate arrays depending on these values,
	218	!-- which are needed for the following read instructions.
	219	READ ( 13 ) variable_chr
	220	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	221	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	222	myid
	223	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	224	ENDIF
	225	READ ( 13 ) nz
[87]	226
[1]	227	READ ( 13 ) variable_chr
[87]	228	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	229	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	230	'prior run on PE ', myid
[257]	231	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	232	ENDIF
[159]	233	READ ( 13 ) max_pr_user ! This value is checked against the number of
	234	! user profiles given for the current run
	235	! in routine user_parin (it has to match)
[87]	236
	237	READ ( 13 ) variable_chr
[1]	238	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	239	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	240	'prior run on PE ', myid
[257]	241	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	242	ENDIF
	243	READ ( 13 ) statistic_regions
[146]	244	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	245	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	246	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1053]	247	qr_init(0:nz+1), nr_init(0:nz+1), sa_init(0:nz+1), &
[146]	248	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	249	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	250	ENDIF
[1]	251
	252	!
	253	!-- Now read all control parameters:
	254	!-- Caution: When the following read instructions have been changed, the
	255	!-- ------- version number stored in the variable binary_version has to be
	256	!-- increased. The same changes must also be done in write_var_list.
	257	READ ( 13 ) variable_chr
	258	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	259
	260	SELECT CASE ( TRIM( variable_chr ) )
	261
	262	CASE ( 'advected_distance_x' )
	263	READ ( 13 ) advected_distance_x
	264	CASE ( 'advected_distance_y' )
	265	READ ( 13 ) advected_distance_y
	266	CASE ( 'alpha_surface' )
	267	READ ( 13 ) alpha_surface
	268	CASE ( 'average_count_pr' )
	269	READ ( 13 ) average_count_pr
	270	CASE ( 'average_count_sp' )
	271	READ ( 13 ) average_count_sp
	272	CASE ( 'average_count_3d' )
	273	READ ( 13 ) average_count_3d
	274	CASE ( 'bc_e_b' )
	275	READ ( 13 ) bc_e_b
	276	CASE ( 'bc_lr' )
	277	READ ( 13 ) bc_lr
	278	CASE ( 'bc_ns' )
	279	READ ( 13 ) bc_ns
[1053]	280	CASE ( 'bc_nr_b' )
	281	READ ( 13 ) bc_nr_b
	282	CASE ( 'bc_nr_t' )
	283	READ ( 13 ) bc_nr_t
	284	CASE ( 'bc_nr_t_val' )
	285	READ ( 13 ) bc_nr_t_val
[1]	286	CASE ( 'bc_p_b' )
	287	READ ( 13 ) bc_p_b
	288	CASE ( 'bc_p_t' )
	289	READ ( 13 ) bc_p_t
	290	CASE ( 'bc_pt_b' )
	291	READ ( 13 ) bc_pt_b
	292	CASE ( 'bc_pt_t' )
	293	READ ( 13 ) bc_pt_t
	294	CASE ( 'bc_pt_t_val' )
	295	READ ( 13 ) bc_pt_t_val
	296	CASE ( 'bc_q_b' )
	297	READ ( 13 ) bc_q_b
	298	CASE ( 'bc_q_t' )
	299	READ ( 13 ) bc_q_t
	300	CASE ( 'bc_q_t_val' )
	301	READ ( 13 ) bc_q_t_val
[1053]	302	CASE ( 'bc_qr_b' )
	303	READ ( 13 ) bc_qr_b
	304	CASE ( 'bc_qr_t' )
	305	READ ( 13 ) bc_qr_t
	306	CASE ( 'bc_qr_t_val' )
	307	READ ( 13 ) bc_qr_t_val
[1]	308	CASE ( 'bc_s_b' )
	309	READ ( 13 ) bc_s_b
	310	CASE ( 'bc_s_t' )
	311	READ ( 13 ) bc_s_t
[95]	312	CASE ( 'bc_sa_t' )
	313	READ ( 13 ) bc_sa_t
[1]	314	CASE ( 'bc_uv_b' )
	315	READ ( 13 ) bc_uv_b
	316	CASE ( 'bc_uv_t' )
	317	READ ( 13 ) bc_uv_t
[95]	318	CASE ( 'bottom_salinityflux' )
	319	READ ( 13 ) bottom_salinityflux
[1]	320	CASE ( 'building_height' )
	321	READ ( 13 ) building_height
	322	CASE ( 'building_length_x' )
	323	READ ( 13 ) building_length_x
	324	CASE ( 'building_length_y' )
	325	READ ( 13 ) building_length_y
	326	CASE ( 'building_wall_left' )
	327	READ ( 13 ) building_wall_left
	328	CASE ( 'building_wall_south' )
	329	READ ( 13 ) building_wall_south
[600]	330	CASE ( 'call_psolver_at_all_substeps' )
	331	READ ( 13 ) call_psolver_at_all_substeps
[138]	332	CASE ( 'canopy_mode' )
	333	READ ( 13 ) canopy_mode
[240]	334	CASE ( 'canyon_height' )
	335	READ ( 13 ) canyon_height
	336	CASE ( 'canyon_width_x' )
	337	READ ( 13 ) canyon_width_x
	338	CASE ( 'canyon_width_y' )
	339	READ ( 13 ) canyon_width_y
	340	CASE ( 'canyon_wall_left' )
	341	READ ( 13 ) canyon_wall_left
	342	CASE ( 'canyon_wall_south' )
	343	READ ( 13 ) canyon_wall_south
[600]	344	CASE ( 'cfl_factor' )
	345	READ ( 13 ) cfl_factor
[1]	346	CASE ( 'cloud_droplets' )
	347	READ ( 13 ) cloud_droplets
	348	CASE ( 'cloud_physics' )
	349	READ ( 13 ) cloud_physics
[1053]	350	CASE ( 'cloud_scheme' )
	351	READ ( 13 ) cloud_scheme
[622]	352	CASE ( 'collective_wait' )
	353	READ ( 13 ) collective_wait
[1]	354	CASE ( 'conserve_volume_flow' )
	355	READ ( 13 ) conserve_volume_flow
[241]	356	CASE ( 'conserve_volume_flow_mode' )
	357	READ ( 13 ) conserve_volume_flow_mode
[291]	358	CASE ( 'coupling_start_time' )
	359	READ ( 13 ) coupling_start_time
[153]	360	CASE ( 'cthf' )
	361	READ ( 13 ) cthf
[1]	362	CASE ( 'current_timestep_number' )
	363	READ ( 13 ) current_timestep_number
[824]	364	CASE ( 'curvature_solution_effects' )
	365	READ ( 13 ) curvature_solution_effects
[600]	366	CASE ( 'cycle_mg' )
	367	READ ( 13 ) cycle_mg
[1]	368	CASE ( 'damp_level_1d' )
	369	READ ( 13 ) damp_level_1d
	370	CASE ( 'dissipation_1d' )
	371	READ ( 13 ) dissipation_1d
[240]	372	CASE ( 'dp_external' )
	373	READ ( 13 ) dp_external
	374	CASE ( 'dp_level_b' )
	375	READ ( 13 ) dp_level_b
	376	CASE ( 'dp_smooth' )
	377	READ ( 13 ) dp_smooth
	378	CASE ( 'dpdxy' )
	379	READ ( 13 ) dpdxy
[138]	380	CASE ( 'drag_coefficient' )
	381	READ ( 13 ) drag_coefficient
[1053]	382	CASE ( 'drizzle' )
	383	READ ( 13 ) drizzle
[1]	384	CASE ( 'dt_pr_1d' )
	385	READ ( 13 ) dt_pr_1d
	386	CASE ( 'dt_run_control_1d' )
	387	READ ( 13 ) dt_run_control_1d
	388	CASE ( 'dt_3d' )
	389	READ ( 13 ) dt_3d
	390	CASE ( 'dvrp_filecount' )
	391	READ ( 13 ) dvrp_filecount
	392	CASE ( 'dx' )
	393	READ ( 13 ) dx
	394	CASE ( 'dy' )
	395	READ ( 13 ) dy
	396	CASE ( 'dz' )
	397	READ ( 13 ) dz
	398	CASE ( 'dz_max' )
	399	READ ( 13 ) dz_max
	400	CASE ( 'dz_stretch_factor' )
	401	READ ( 13 ) dz_stretch_factor
	402	CASE ( 'dz_stretch_level' )
	403	READ ( 13 ) dz_stretch_level
	404	CASE ( 'e_min' )
	405	READ ( 13 ) e_min
	406	CASE ( 'end_time_1d' )
	407	READ ( 13 ) end_time_1d
	408	CASE ( 'fft_method' )
	409	READ ( 13 ) fft_method
[849]	410	CASE ( 'first_call_lpm' )
	411	READ ( 13 ) first_call_lpm
[1]	412	CASE ( 'galilei_transformation' )
	413	READ ( 13 ) galilei_transformation
	414	CASE ( 'hom' )
	415	READ ( 13 ) hom
[143]	416	CASE ( 'hom_sum' )
	417	READ ( 13 ) hom_sum
[151]	418	CASE ( 'humidity' )
	419	READ ( 13 ) humidity
	420	CASE ( 'inflow_damping_factor' )
	421	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	422	ALLOCATE( inflow_damping_factor(0:nz+1) )
	423	ENDIF
	424	READ ( 13 ) inflow_damping_factor
	425	CASE ( 'inflow_damping_height' )
	426	READ ( 13 ) inflow_damping_height
	427	CASE ( 'inflow_damping_width' )
	428	READ ( 13 ) inflow_damping_width
[1]	429	CASE ( 'inflow_disturbance_begin' )
	430	READ ( 13 ) inflow_disturbance_begin
	431	CASE ( 'inflow_disturbance_end' )
	432	READ ( 13 ) inflow_disturbance_end
	433	CASE ( 'km_constant' )
	434	READ ( 13 ) km_constant
[138]	435	CASE ( 'lad' )
	436	READ ( 13 ) lad
	437	CASE ( 'lad_surface' )
	438	READ ( 13 ) lad_surface
	439	CASE ( 'lad_vertical_gradient' )
	440	READ ( 13 ) lad_vertical_gradient
	441	CASE ( 'lad_vertical_gradient_level' )
	442	READ ( 13 ) lad_vertical_gradient_level
	443	CASE ( 'lad_vertical_gradient_level_in' )
	444	READ ( 13 ) lad_vertical_gradient_level_ind
[411]	445	CASE ( 'large_scale_subsidence' )
	446	READ ( 13 ) large_scale_subsidence
[153]	447	CASE ( 'leaf_surface_concentration' )
	448	READ ( 13 ) leaf_surface_concentration
[63]	449	CASE ( 'loop_optimization' )
	450	READ ( 13 ) loop_optimization
[927]	451	CASE ( 'masking_method' )
	452	READ ( 13 ) masking_method
[151]	453	CASE ( 'mean_inflow_profiles' )
	454	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	455	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	456	ENDIF
	457	READ ( 13 ) mean_inflow_profiles
[600]	458	CASE ( 'mg_cycles' )
	459	READ ( 13 ) mg_cycles
	460	CASE ( 'mg_switch_to_pe0_level' )
	461	READ ( 13 ) mg_switch_to_pe0_level
[1]	462	CASE ( 'mixing_length_1d' )
	463	READ ( 13 ) mixing_length_1d
	464	CASE ( 'momentum_advec' )
	465	READ ( 13 ) momentum_advec
[1053]	466	CASE ( 'mu_constant' )
	467	READ ( 13 ) mu_constant
	468	CASE ( 'mu_constant_value' )
	469	READ ( 13 ) mu_constant_value
[1]	470	CASE ( 'netcdf_precision' )
	471	READ ( 13 ) netcdf_precision
[940]	472	CASE ( 'neutral' )
	473	READ ( 13 ) neutral
[600]	474	CASE ( 'ngsrb' )
	475	READ ( 13 ) ngsrb
[1053]	476	CASE ( 'nr_init' )
	477	READ ( 13 ) nr_init
	478	CASE ( 'nr_surface' )
	479	READ ( 13 ) nr_surface
	480	CASE ( 'nr_surface_initial_change' )
	481	READ ( 13 ) nr_surface_initial_change
	482	CASE ( 'nr_vertical_gradient' )
	483	READ ( 13 ) nr_vertical_gradient
	484	CASE ( 'nr_vertical_gradient_level' )
	485	READ ( 13 ) nr_vertical_gradient_level
	486	CASE ( 'nr_vertical_gradient_level_ind' )
	487	READ ( 13 ) nr_vertical_gradient_level_ind
[600]	488	CASE ( 'nsor' )
	489	READ ( 13 ) nsor
[1]	490	CASE ( 'nsor_ini' )
	491	READ ( 13 ) nsor_ini
	492	CASE ( 'nx' )
	493	READ ( 13 ) nx
[147]	494	nx_on_file = nx
[1]	495	CASE ( 'ny' )
	496	READ ( 13 ) ny
[147]	497	ny_on_file = ny
[94]	498	CASE ( 'ocean' )
	499	READ ( 13 ) ocean
[1]	500	CASE ( 'old_dt' )
	501	READ ( 13 ) old_dt
	502	CASE ( 'omega' )
	503	READ ( 13 ) omega
[600]	504	CASE ( 'omega_sor' )
	505	READ ( 13 ) omega_sor
[345]	506	CASE ( 'output_for_t0' )
	507	READ (13) output_for_t0
[1]	508	CASE ( 'passive_scalar' )
	509	READ ( 13 ) passive_scalar
[138]	510	CASE ( 'pch_index' )
	511	READ ( 13 ) pch_index
[1]	512	CASE ( 'phi' )
	513	READ ( 13 ) phi
[138]	514	CASE ( 'plant_canopy' )
	515	READ ( 13 ) plant_canopy
[1]	516	CASE ( 'prandtl_layer' )
	517	READ ( 13 ) prandtl_layer
[600]	518	CASE ( 'prandtl_number' )
	519	READ ( 13 ) prandtl_number
[1]	520	CASE ( 'precipitation' )
	521	READ ( 13 ) precipitation
[600]	522	CASE ( 'psolver' )
	523	READ ( 13 ) psolver
[978]	524	CASE ( 'pt_damping_factor' )
	525	READ ( 13 ) pt_damping_factor
	526	CASE ( 'pt_damping_width' )
	527	READ ( 13 ) pt_damping_width
[1]	528	CASE ( 'pt_init' )
	529	READ ( 13 ) pt_init
[57]	530	CASE ( 'pt_reference' )
	531	READ ( 13 ) pt_reference
[1]	532	CASE ( 'pt_surface' )
	533	READ ( 13 ) pt_surface
	534	CASE ( 'pt_surface_initial_change' )
	535	READ ( 13 ) pt_surface_initial_change
	536	CASE ( 'pt_vertical_gradient' )
	537	READ ( 13 ) pt_vertical_gradient
	538	CASE ( 'pt_vertical_gradient_level' )
	539	READ ( 13 ) pt_vertical_gradient_level
	540	CASE ( 'pt_vertical_gradient_level_ind' )
	541	READ ( 13 ) pt_vertical_gradient_level_ind
	542	CASE ( 'q_init' )
	543	READ ( 13 ) q_init
	544	CASE ( 'q_surface' )
	545	READ ( 13 ) q_surface
	546	CASE ( 'q_surface_initial_change' )
	547	READ ( 13 ) q_surface_initial_change
	548	CASE ( 'q_vertical_gradient' )
	549	READ ( 13 ) q_vertical_gradient
	550	CASE ( 'q_vertical_gradient_level' )
	551	READ ( 13 ) q_vertical_gradient_level
	552	CASE ( 'q_vertical_gradient_level_ind' )
	553	READ ( 13 ) q_vertical_gradient_level_ind
[1053]	554	CASE ( 'qr_init' )
	555	READ ( 13 ) qr_init
	556	CASE ( 'qr_surface' )
	557	READ ( 13 ) qr_surface
	558	CASE ( 'qr_surface_initial_change' )
	559	READ ( 13 ) qr_surface_initial_change
	560	CASE ( 'qr_vertical_gradient' )
	561	READ ( 13 ) qr_vertical_gradient
	562	CASE ( 'qr_vertical_gradient_level' )
	563	READ ( 13 ) qr_vertical_gradient_level
	564	CASE ( 'qr_vertical_gradient_level_ind' )
	565	READ ( 13 ) qr_vertical_gradient_level_ind
[1]	566	CASE ( 'radiation' )
	567	READ ( 13 ) radiation
	568	CASE ( 'random_generator' )
	569	READ ( 13 ) random_generator
	570	CASE ( 'random_heatflux' )
	571	READ ( 13 ) random_heatflux
[600]	572	CASE ( 'rayleigh_damping_factor' )
	573	READ ( 13 ) rayleigh_damping_factor
	574	CASE ( 'rayleigh_damping_height' )
	575	READ ( 13 ) rayleigh_damping_height
[151]	576	CASE ( 'recycling_width' )
	577	READ ( 13 ) recycling_width
[600]	578	CASE ( 'residual_limit' )
	579	READ ( 13 ) residual_limit
[1]	580	CASE ( 'rif_max' )
	581	READ ( 13 ) rif_max
	582	CASE ( 'rif_min' )
	583	READ ( 13 ) rif_min
	584	CASE ( 'roughness_length' )
	585	READ ( 13 ) roughness_length
	586	CASE ( 'runnr' )
	587	READ ( 13 ) runnr
[291]	588	CASE ( 'run_coupled' )
	589	READ ( 13 ) run_coupled
[94]	590	CASE ( 'sa_init' )
	591	READ ( 13 ) sa_init
	592	CASE ( 'sa_surface' )
	593	READ ( 13 ) sa_surface
	594	CASE ( 'sa_vertical_gradient' )
	595	READ ( 13 ) sa_vertical_gradient
	596	CASE ( 'sa_vertical_gradient_level' )
	597	READ ( 13 ) sa_vertical_gradient_level
[1]	598	CASE ( 'scalar_advec' )
	599	READ ( 13 ) scalar_advec
[153]	600	CASE ( 'scalar_exchange_coefficient' )
	601	READ ( 13 ) scalar_exchange_coefficient
[1]	602	CASE ( 'simulated_time' )
	603	READ ( 13 ) simulated_time
	604	CASE ( 'surface_heatflux' )
	605	READ ( 13 ) surface_heatflux
	606	CASE ( 'surface_pressure' )
	607	READ ( 13 ) surface_pressure
	608	CASE ( 'surface_scalarflux' )
	609	READ ( 13 ) surface_scalarflux
	610	CASE ( 'surface_waterflux' )
[1053]	611	READ ( 13 ) surface_waterflux
	612	CASE ( 'surface_waterflux_nr' )
	613	READ ( 13 ) surface_waterflux_nr
	614	CASE ( 'surface_waterflux_qr' )
	615	READ ( 13 ) surface_waterflux_qr
[1]	616	CASE ( 's_surface' )
	617	READ ( 13 ) s_surface
	618	CASE ( 's_surface_initial_change' )
	619	READ ( 13 ) s_surface_initial_change
	620	CASE ( 's_vertical_gradient' )
	621	READ ( 13 ) s_vertical_gradient
	622	CASE ( 's_vertical_gradient_level' )
	623	READ ( 13 ) s_vertical_gradient_level
[102]	624	CASE ( 'time_coupling' )
	625	READ ( 13 ) time_coupling
[1]	626	CASE ( 'time_disturb' )
	627	READ ( 13 ) time_disturb
[587]	628	CASE ( 'time_dopr' )
[1]	629	READ ( 13 ) time_dopr
[587]	630	CASE ( 'time_domask' )
	631	READ ( 13 ) time_domask
[1]	632	CASE ( 'time_dopr_av' )
	633	READ ( 13 ) time_dopr_av
	634	CASE ( 'time_dopr_listing' )
	635	READ ( 13 ) time_dopr_listing
	636	CASE ( 'time_dopts' )
	637	READ ( 13 ) time_dopts
	638	CASE ( 'time_dosp' )
	639	READ ( 13 ) time_dosp
	640	CASE ( 'time_dots' )
	641	READ ( 13 ) time_dots
	642	CASE ( 'time_do2d_xy' )
	643	READ ( 13 ) time_do2d_xy
	644	CASE ( 'time_do2d_xz' )
	645	READ ( 13 ) time_do2d_xz
	646	CASE ( 'time_do2d_yz' )
	647	READ ( 13 ) time_do2d_yz
	648	CASE ( 'time_do3d' )
	649	READ ( 13 ) time_do3d
	650	CASE ( 'time_do_av' )
	651	READ ( 13 ) time_do_av
	652	CASE ( 'time_do_sla' )
	653	READ ( 13 ) time_do_sla
	654	CASE ( 'time_dvrp' )
	655	READ ( 13 ) time_dvrp
	656	CASE ( 'time_restart' )
	657	READ ( 13 ) time_restart
	658	CASE ( 'time_run_control' )
	659	READ ( 13 ) time_run_control
[291]	660	CASE ( 'time_since_reference_point' )
	661	READ ( 13 ) time_since_reference_point
[116]	662	CASE ( 'time_sort_particles' )
	663	READ ( 13 ) time_sort_particles
[1]	664	CASE ( 'timestep_scheme' )
	665	READ ( 13 ) timestep_scheme
	666	CASE ( 'topography' )
	667	READ ( 13 ) topography
[256]	668	CASE ( 'topography_grid_convention' )
	669	READ ( 13 ) topography_grid_convention
[19]	670	CASE ( 'top_heatflux' )
	671	READ ( 13 ) top_heatflux
[102]	672	CASE ( 'top_momentumflux_u' )
	673	READ ( 13 ) top_momentumflux_u
	674	CASE ( 'top_momentumflux_v' )
	675	READ ( 13 ) top_momentumflux_v
[94]	676	CASE ( 'top_salinityflux' )
	677	READ ( 13 ) top_salinityflux
[1]	678	CASE ( 'tsc' )
	679	READ ( 13 ) tsc
[151]	680	CASE ( 'turbulent_inflow' )
	681	READ ( 13 ) turbulent_inflow
[241]	682	CASE ( 'u_bulk' )
	683	READ ( 13 ) u_bulk
[1]	684	CASE ( 'u_init' )
	685	READ ( 13 ) u_init
	686	CASE ( 'u_max' )
	687	READ ( 13 ) u_max
	688	CASE ( 'u_max_ijk' )
	689	READ ( 13 ) u_max_ijk
	690	CASE ( 'ug' )
	691	READ ( 13 ) ug
	692	CASE ( 'ug_surface' )
	693	READ ( 13 ) ug_surface
	694	CASE ( 'ug_vertical_gradient' )
	695	READ ( 13 ) ug_vertical_gradient
	696	CASE ( 'ug_vertical_gradient_level' )
	697	READ ( 13 ) ug_vertical_gradient_level
	698	CASE ( 'ug_vertical_gradient_level_ind' )
	699	READ ( 13 ) ug_vertical_gradient_level_ind
	700	CASE ( 'use_surface_fluxes' )
	701	READ ( 13 ) use_surface_fluxes
[20]	702	CASE ( 'use_top_fluxes' )
	703	READ ( 13 ) use_top_fluxes
[1]	704	CASE ( 'use_ug_for_galilei_tr' )
	705	READ ( 13 ) use_ug_for_galilei_tr
	706	CASE ( 'use_upstream_for_tke' )
	707	READ ( 13 ) use_upstream_for_tke
[241]	708	CASE ( 'v_bulk' )
	709	READ ( 13 ) v_bulk
[1]	710	CASE ( 'v_init' )
	711	READ ( 13 ) v_init
	712	CASE ( 'v_max' )
	713	READ ( 13 ) v_max
	714	CASE ( 'v_max_ijk' )
	715	READ ( 13 ) v_max_ijk
[1053]	716	CASE ( 'ventilation_effect' )
	717	READ ( 13 ) ventilation_effect
[1]	718	CASE ( 'vg' )
	719	READ ( 13 ) vg
	720	CASE ( 'vg_surface' )
	721	READ ( 13 ) vg_surface
	722	CASE ( 'vg_vertical_gradient' )
	723	READ ( 13 ) vg_vertical_gradient
	724	CASE ( 'vg_vertical_gradient_level' )
	725	READ ( 13 ) vg_vertical_gradient_level
	726	CASE ( 'vg_vertical_gradient_level_ind' )
	727	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	728	CASE ( 'volume_flow_area' )
	729	READ ( 13 ) volume_flow_area
	730	CASE ( 'volume_flow_initial' )
	731	READ ( 13 ) volume_flow_initial
[1]	732	CASE ( 'wall_adjustment' )
	733	READ ( 13 ) wall_adjustment
[580]	734	CASE ( 'subs_vertical_gradient' )
	735	READ ( 13 ) subs_vertical_gradient
	736	CASE ( 'subs_vertical_gradient_level' )
	737	READ ( 13 ) subs_vertical_gradient_level
	738	CASE ( 'subs_vertical_gradient_level_i' )
	739	READ ( 13 ) subs_vertical_gradient_level_i
[1]	740	CASE ( 'w_max' )
	741	READ ( 13 ) w_max
	742	CASE ( 'w_max_ijk' )
	743	READ ( 13 ) w_max_ijk
[978]	744	CASE ( 'z0h_factor' )
	745	READ ( 13 ) z0h_factor
[1]	746
	747	CASE DEFAULT
[257]	748	WRITE( message_string, * ) 'unknown variable named "', &
	749	TRIM( variable_chr ), '" found in', &
	750	' data from prior run on PE ', myid
	751	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	752	END SELECT
	753	!
	754	!-- Read next string
	755	READ ( 13 ) variable_chr
	756
	757	ENDDO
	758
	759
[146]	760	END SUBROUTINE read_var_list
[143]	761
[146]	762
	763
[147]	764	SUBROUTINE read_parts_of_var_list
	765
	766	!------------------------------------------------------------------------------!
	767	! Description:
	768	! ------------
	769	! Skipping the global control variables from restart-file (binary format)
	770	! except some informations needed when reading restart data from a previous
[151]	771	! run which used a smaller total domain or/and a different domain decomposition.
[147]	772	!------------------------------------------------------------------------------!
	773
[151]	774	USE arrays_3d
[147]	775	USE control_parameters
	776	USE indices
	777	USE pegrid
	778	USE statistics
	779
	780	IMPLICIT NONE
	781
	782	CHARACTER (LEN=10) :: version_on_file
	783	CHARACTER (LEN=30) :: variable_chr
[626]	784	CHARACTER (LEN=1) :: cdum
[147]	785
	786	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	787	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	788
[151]	789	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	790	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	791
	792
	793	CALL check_open( 13 )
	794
	795	WRITE (9,*) 'rpovl: after check open 13'
	796	CALL local_flush( 9 )
	797	READ ( 13 ) version_on_file
	798
	799	!
	800	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	801	!-- run
	802	READ ( 13 ) variable_chr
	803	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	804	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	805	'run on PE ', myid
[257]	806	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	807	ENDIF
	808	READ ( 13 ) numprocs_previous_run
	809
	810	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	811	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	812	ENDIF
	813
	814	READ ( 13 ) variable_chr
	815	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	816	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	817	'prior run on PE ', myid
	818	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	819	ENDIF
	820	READ ( 13 ) hor_index_bounds_previous_run
	821
	822	!
	823	!-- Read vertical number of gridpoints and number of different areas used
	824	!-- for computing statistics. Allocate arrays depending on these values,
	825	!-- which are needed for the following read instructions.
	826	READ ( 13 ) variable_chr
	827	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	828	message_string = 'nz not found in restart data file'
	829	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	830	ENDIF
	831	READ ( 13 ) nz_on_file
	832	IF ( nz_on_file /= nz ) THEN
[257]	833	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	834	'gridpoints along z', &
	835	'&nz on file = "', nz_on_file, '"', &
	836	'&nz from run = "', nz, '"'
[257]	837	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	838	ENDIF
	839
	840	READ ( 13 ) variable_chr
	841	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	842	message_string = 'max_pr_user not found in restart data file'
	843	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	844	ENDIF
	845	READ ( 13 ) max_pr_user_on_file
[170]	846	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	847	WRITE( message_string, * ) 'number of user profiles on res', &
	848	'tart data file differs from the current ', &
	849	'run&max_pr_user on file = "', &
	850	max_pr_user_on_file, '"', &
	851	'&max_pr_user from run = "', &
[257]	852	max_pr_user, '"'
	853	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	854	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	855	ELSE
	856	tmp_mpru = max_pr_user
[147]	857	ENDIF
	858
	859	READ ( 13 ) variable_chr
	860	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	861	message_string = 'statistic_regions not found in restart data file'
	862	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	863	ENDIF
	864	READ ( 13 ) statistic_regions_on_file
[173]	865	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	866	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	867	'differ from the current run', &
	868	'&statistic regions on file = "', &
	869	statistic_regions_on_file, '"', &
	870	'&statistic regions from run = "', &
	871	statistic_regions, '"', &
[257]	872	'&statistic data may be lost!'
	873	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	874	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	875	ELSE
	876	tmp_sr = statistic_regions
[147]	877	ENDIF
	878
	879
	880	!
	881	!-- Now read and check some control parameters and skip the rest
	882	WRITE (9,*) 'wpovl: begin reading variables'
	883	CALL local_flush( 9 )
	884	READ ( 13 ) variable_chr
	885
	886	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	887
	888	SELECT CASE ( TRIM( variable_chr ) )
	889
[151]	890	CASE ( 'average_count_pr' )
	891	READ ( 13 ) average_count_pr
[257]	892	IF ( average_count_pr /= 0 ) THEN
[274]	893	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	894	'averaged. &Averaging will be done now using ', &
	895	average_count_pr, ' samples.'
	896	CALL message( 'read_parts_of_var_list', 'PA0309', &
	897	0, 1, 0, 6, 0 )
[151]	898	ENDIF
	899
[147]	900	CASE ( 'hom' )
	901	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	902	0:statistic_regions_on_file) )
	903	READ ( 13 ) hom_on_file
[170]	904	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	905	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	906	DEALLOCATE( hom_on_file )
	907
[151]	908	CASE ( 'hom_sum' )
	909	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	910	0:statistic_regions_on_file) )
	911	READ ( 13 ) hom_sum_on_file
[170]	912	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	913	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	914	DEALLOCATE( hom_sum_on_file )
	915
[147]	916	CASE ( 'nx' )
	917	READ ( 13 ) nx_on_file
	918
	919	CASE ( 'ny' )
	920	READ ( 13 ) ny_on_file
	921
	922
	923	CASE DEFAULT
	924
[626]	925	READ ( 13 ) cdum
[147]	926
	927	END SELECT
	928
	929	READ ( 13 ) variable_chr
	930
	931	ENDDO
	932
[151]	933	!
	934	!-- Calculate the temporal average of vertical profiles, if neccessary
	935	IF ( average_count_pr /= 0 ) THEN
	936	hom_sum = hom_sum / REAL( average_count_pr )
	937	ENDIF
[147]	938
[151]	939
[147]	940	END SUBROUTINE read_parts_of_var_list
	941
	942
	943
[146]	944	SUBROUTINE skip_var_list
	945
	946	!------------------------------------------------------------------------------!
	947	! Description:
	948	! ------------
	949	! Skipping the global control variables from restart-file (binary format)
	950	!------------------------------------------------------------------------------!
	951
[147]	952	IMPLICIT NONE
	953
[146]	954	CHARACTER (LEN=10) :: version_on_file
	955	CHARACTER (LEN=30) :: variable_chr
	956
[600]	957	CHARACTER (LEN=1) :: cdum
[146]	958
	959
[147]	960	WRITE (9,*) 'skipvl #1'
	961	CALL local_flush( 9 )
[146]	962	READ ( 13 ) version_on_file
	963
[147]	964	WRITE (9,*) 'skipvl before variable_chr'
	965	CALL local_flush( 9 )
[146]	966	READ ( 13 ) variable_chr
[147]	967	WRITE (9,*) 'skipvl after variable_chr'
	968	CALL local_flush( 9 )
[146]	969
	970	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	971
[147]	972	WRITE (9,*) 'skipvl chr = ', variable_chr
	973	CALL local_flush( 9 )
[600]	974	READ ( 13 ) cdum
[146]	975	READ ( 13 ) variable_chr
	976
	977	ENDDO
[147]	978	WRITE (9,*) 'skipvl last'
	979	CALL local_flush( 9 )
[146]	980
	981
	982	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |