Home

Context Navigation

source: palm/trunk/SOURCE/read_restart_data_mod.f90 @ 4847

Last change on this file since 4847 was 4845, checked in by raasch, 4 years ago
maximum phase velocities are alwasy used for radiation boundary conditions, parameter use_cmax removed
Property svn:keywords set to `Id`
File size: 108.0 KB

Rev	Line
[2894]	1	!> @file read_restart_data_mod.f90
	2	!------------------------------------------------------------------------------!
	3	! This file is part of the PALM model system.
	4	!
	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4828]	17	! Copyright 1997-2021 Leibniz Universitaet Hannover
[2894]	18	!------------------------------------------------------------------------------!
	19	!
	20	! Current revisions:
	21	! -----------------
[4590]	22	!
	23	!
[2894]	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_restart_data_mod.f90 4845 2021-01-18 11:15:37Z raasch $
[4845]	27	! arrays removed that were required for radiation boundary conditions
	28	!
	29	! 4828 2021-01-05 11:21:41Z Giersch
[4802]	30	! include time_indoor into restart mechanism
	31	!
	32	! 4777 2020-11-06 14:50:49Z raasch
[4777]	33	! bugfix for reading spectra data with MPI-I/O (they are global arrays!)
	34	!
	35	! 4671 2020-09-09 20:27:58Z pavelkrc
[4671]	36	! Implementation of downward facing USM and LSM surfaces
	37	!
	38	! 4617 2020-07-22 09:48:50Z raasch
[4617]	39	! check, if boundary conditions in the prerun are both set to cyclic
	40	!
	41	! 4590 2020-07-06 14:34:59Z suehring
[4590]	42	! Bugfix in allocation of hom and hom_sum in case of mpi-io restart when
	43	! chemistry or salsa are employed
	44	!
	45	! 4580 2020-06-29 07:54:21Z raasch
[4580]	46	! data handling with MPI-IO for cyclic-fill added (so far only for global data)
	47	!
	48	! 4564 2020-06-12 14:03:36Z raasch
[4564]	49	! Vertical nesting method of Huq et al. (2019) removed
	50	!
	51	! 4539 2020-05-18 14:05:17Z raasch
[4539]	52	! location message added
	53	!
	54	! 4536 2020-05-17 17:24:13Z raasch
[4536]	55	! binary version incremented
	56	!
	57	! 4534 2020-05-14 18:35:22Z raasch
[4534]	58	! adjustments for I/O on reduced number of cores using shared memory MPI
	59	!
	60	! 4518 2020-05-04 15:44:28Z suehring
[4518]	61	! Move input of diagnostic output quantities to doq_rrd_local
	62	!
	63	! 4517 2020-05-03 14:29:30Z raasch
[4514]	64	! qsurf and ssurf added
	65	!
	66	! 4498 2020-04-15 14:26:31Z raasch
[4498]	67	! argument removed from rd_mpi_io_open
	68	!
	69	! 4496 2020-04-15 08:37:26Z raasch
[4496]	70	! bugfix: MPI barrier removed, coupling character added to input filename
	71	!
	72	! 4495 2020-04-13 20:11:20Z raasch
[4495]	73	! restart data handling with MPI-IO added
	74	!
	75	! 4435 2020-03-03 10:38:41Z raasch
[4435]	76	! bugfix for message that reports about files that are read from in case that the virtual PE grid
	77	! has chenged (in case of large number of files format was exceeded), detailed messages about the
	78	! files are now output to the debug file
	79	!
	80	! 4431 2020-02-27 23:23:01Z gronemeier
[4431]	81	! added u_center_av, v_center_av, wspeed_av
	82	!
	83	! 4360 2020-01-07 11:25:50Z suehring
[4356]	84	! Change automatic arrays to allocatable ones in rrd_local, in order to avoid
[4431]	85	! memory problems due to too small stack size for large jobs with intel
[4356]	86	! compiler. (J.Resler)
[4431]	87	!
[4356]	88	! 4331 2019-12-10 18:25:02Z suehring
[4331]	89	! Enable restart data for 2-m potential temperature output
[4431]	90	!
[4331]	91	! 4301 2019-11-22 12:09:09Z oliver.maas
[4301]	92	! removed recycling_yshift
[4431]	93	!
[4301]	94	! 4227 2019-09-10 18:04:34Z gronemeier
[4227]	95	! implement new palm_date_time_mod and increased binary version
[4431]	96	!
[4227]	97	! 4146 2019-08-07 07:47:36Z gronemeier
[4182]	98	! Corrected "Former revisions" section
[4431]	99	!
[4182]	100	! 4131 2019-08-02 11:06:18Z monakurppa
[4131]	101	! Allocate hom and hom_sum to allow profile output for salsa variables.
[4431]	102	!
[4131]	103	! 4101 2019-07-17 15:14:26Z gronemeier
[4101]	104	! remove old_dt
[4431]	105	!
[4101]	106	! 4039 2019-06-18 10:32:41Z suehring
[4039]	107	! input of uu_av, vv_av, ww_av added
[4431]	108	!
[4039]	109	! 4017 2019-06-06 12:16:46Z schwenkel
[4009]	110	! bugfix for r3998, allocation of 3d temporary arrays of various dimensions revised
[4431]	111	!
[4009]	112	! 3998 2019-05-23 13:38:11Z suehring
[3998]	113	! Formatting adjustment
[4431]	114	!
[3998]	115	! 3994 2019-05-22 18:08:09Z suehring
[3994]	116	! output of turbulence intensity added
[4431]	117	!
[3994]	118	! 3988 2019-05-22 11:32:37Z kanani
[3988]	119	! + time_virtual_measurement (to enable steering of output interval)
[4431]	120	!
[3988]	121	! 3936 2019-04-26 15:38:02Z kanani
[3936]	122	! Enable time-averaged output of theta_2m* with restarts
[4431]	123	!
[3936]	124	! 3767 2019-02-27 08:18:02Z raasch
[3767]	125	! unused variables removed from rrd-subroutines parameter list
[4431]	126	!
[3767]	127	! 3766 2019-02-26 16:23:41Z raasch
[3766]	128	! first argument removed from module_interface_rrd_*
[4431]	129	!
[3766]	130	! 3668 2019-01-14 12:49:24Z maronga
[3668]	131	! Removed most_method and increased binary version
[4431]	132	!
[3668]	133	! 3655 2019-01-07 16:51:22Z knoop
[3637]	134	! Implementation of the PALM module interface
[4431]	135	!
[4182]	136	! 2894 2018-03-15 09:17:58Z Giersch
	137	! Initial revision
[2894]	138	!
[4431]	139	!
[2894]	140	! Description:
	141	! ------------
	142	!> Reads restart data from restart-file(s) (binary format).
[3298]	143	!>
	144	!> @todo: Revise max_pr_cs (profiles for chemistry)
[4039]	145	!> @todo: Modularize reading of restart data for diagnostic quantities, which
	146	!> is not possible with the current module-interface structure
[2894]	147	!------------------------------------------------------------------------------!
	148	MODULE read_restart_data_mod
	149
	150
[3637]	151	USE arrays_3d, &
	152	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
	153	q_init, ref_state, sa_init, s_init, u_init, ug, v_init, vg, &
[4845]	154	e, kh, km, p, pt, q, ql, s, u, v, vpt, w
[2894]	155
[3637]	156	USE averaging
	157
[4495]	158	USE bulk_cloud_model_mod, &
	159	ONLY: bulk_cloud_model
	160
[3298]	161	USE chem_modules, &
	162	ONLY: max_pr_cs
	163
[3637]	164	USE control_parameters
[3298]	165
[3637]	166	USE cpulog, &
	167	ONLY: cpu_log, log_point_s
	168
	169	USE grid_variables, &
	170	ONLY: dx, dy
	171
[4495]	172	USE gust_mod, &
	173	ONLY: gust_module_enabled
	174
[3637]	175	USE indices, &
	176	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, nx_on_file, ny, nys, nysg, nyn, &
	177	nyng, ny_on_file, nz, nzb, nzt
	178
[4802]	179	USE indoor_model_mod, &
	180	ONLY: time_indoor
	181
[3637]	182	USE kinds
	183
	184	USE model_1d_mod, &
	185	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	186
	187	USE module_interface, &
	188	ONLY: module_interface_rrd_global, &
	189	module_interface_rrd_local
	190
	191	USE netcdf_interface, &
	192	ONLY: netcdf_precision, output_for_t0
	193
[4495]	194	USE particle_attributes, &
	195	ONLY: particle_advection
	196
[3637]	197	USE pegrid
	198
	199	USE radiation_model_mod, &
	200	ONLY: time_radiation
	201
	202	USE random_function_mod, &
	203	ONLY: random_iv, random_iy
	204
	205	USE random_generator_parallel, &
	206	ONLY: id_random_array, seq_random_array
	207
[4495]	208	USE restart_data_mpi_io_mod, &
	209	ONLY: rd_mpi_io_check_array, rd_mpi_io_close, rd_mpi_io_open, rrd_mpi_io, &
	210	rrd_mpi_io_global_array
	211
[3637]	212	USE spectra_mod, &
	213	ONLY: average_count_sp, spectrum_x, spectrum_y
	214
	215	USE surface_mod, &
	216	ONLY : surface_rrd_local
	217
	218	USE statistics, &
	219	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	220	v_max, v_max_ijk, w_max, w_max_ijk, z_i
	221
[4495]	222	USE user, &
	223	ONLY: user_module_enabled
	224
[3988]	225	USE virtual_measurement_mod, &
	226	ONLY: time_virtual_measurement
[3637]	227
[3988]	228
[2894]	229	IMPLICIT NONE
	230
	231
	232	INTERFACE rrd_global
	233	MODULE PROCEDURE rrd_global
	234	END INTERFACE rrd_global
	235
	236	INTERFACE rrd_read_parts_of_global
	237	MODULE PROCEDURE rrd_read_parts_of_global
	238	END INTERFACE rrd_read_parts_of_global
	239
	240	INTERFACE rrd_local
	241	MODULE PROCEDURE rrd_local
	242	END INTERFACE rrd_local
	243
	244	INTERFACE rrd_skip_global
	245	MODULE PROCEDURE rrd_skip_global
	246	END INTERFACE rrd_skip_global
	247
	248
[3294]	249	PUBLIC rrd_global, rrd_read_parts_of_global, rrd_local, rrd_skip_global
[2894]	250
	251
	252	CONTAINS
	253
[3294]	254	!------------------------------------------------------------------------------!
[2894]	255	! Description:
	256	! ------------
[4431]	257	!> Reads values of global control variables from restart-file (binary format)
[2894]	258	!> created by PE0 of the previous run
	259	!------------------------------------------------------------------------------!
[4495]	260	SUBROUTINE rrd_global
[2894]	261
	262
[4495]	263	CHARACTER(LEN=10) :: binary_version_global !<
	264	CHARACTER(LEN=10) :: version_on_file !<
	265	CHARACTER(LEN=20) :: tmp_name !< temporary variable
[2894]	266
[4495]	267	INTEGER :: i !< loop index
[2894]	268
[4495]	269	LOGICAL :: array_found !<
	270	LOGICAL :: found !<
[2894]	271
[4495]	272
	273	CALL location_message( 'read global restart data', 'start' )
	274
	275	IF ( TRIM( restart_data_format_input ) == 'fortran_binary' ) THEN
	276	!
	277	!-- Input in Fortran binary format
[2894]	278	CALL check_open( 13 )
	279	!
[3294]	280	!-- Make version number check first
[2894]	281	READ ( 13 ) length
	282	READ ( 13 ) restart_string(1:length)
	283	READ ( 13 ) version_on_file
	284
[4671]	285	binary_version_global = '5.1'
[2894]	286	IF ( TRIM( version_on_file ) /= TRIM( binary_version_global ) ) THEN
[3045]	287	WRITE( message_string, * ) 'version mismatch concerning ', &
	288	'binary_version_global:', &
[3046]	289	'&version on file = "', &
[2894]	290	TRIM( version_on_file ), '"', &
[3046]	291	'&version on program = "', &
[2894]	292	TRIM( binary_version_global ), '"'
	293	CALL message( 'rrd_global', 'PA0296', 1, 2, 0, 6, 0 )
	294	ENDIF
	295
	296	!
[3294]	297	!-- Read number of PEs and horizontal index bounds of all PEs used in the
	298	!-- previous run
[2894]	299	READ ( 13 ) length
	300	READ ( 13 ) restart_string(1:length)
	301
	302	IF ( TRIM( restart_string(1:length) ) /= 'numprocs' ) THEN
	303	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	304	'run on PE ', myid
	305	CALL message( 'rrd_global', 'PA0297', 1, 2, 0, 6, 0 )
	306	ENDIF
	307	READ ( 13 ) numprocs_previous_run
	308
	309	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	310	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	311	ENDIF
	312
	313	READ ( 13 ) length
	314	READ ( 13 ) restart_string(1:length)
	315
	316	IF ( restart_string(1:length) /= 'hor_index_bounds' ) THEN
	317	WRITE( message_string, * ) 'hor_index_bounds not found in data ', &
	318	'from prior run on PE ', myid
	319	CALL message( 'rrd_global', 'PA0298', 1, 2, 0, 6, 0 )
	320	ENDIF
	321	READ ( 13 ) hor_index_bounds_previous_run
	322
	323	!
[3294]	324	!-- Read vertical number of gridpoints and number of different areas used
	325	!-- for computing statistics. Allocate arrays depending on these values,
	326	!-- which are needed for the following read instructions.
[2894]	327	READ ( 13 ) length
	328	READ ( 13 ) restart_string(1:length)
	329
	330	IF ( restart_string(1:length) /= 'nz' ) THEN
	331	WRITE( message_string, * ) 'nz not found in data from prior run ', &
	332	'on PE ', myid
	333	CALL message( 'rrd_global', 'PA0299', 1, 2, 0, 6, 0 )
	334	ENDIF
	335	READ ( 13 ) nz
	336
	337	READ ( 13 ) length
	338	READ ( 13 ) restart_string(1:length)
	339
	340	IF ( restart_string(1:length) /= 'max_pr_user' ) THEN
	341	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
	342	'prior run on PE ', myid
	343	CALL message( 'rrd_global', 'PA0300', 1, 2, 0, 6, 0 )
	344	ENDIF
	345	READ ( 13 ) max_pr_user ! This value is checked against the number of
	346	! user profiles given for the current run
	347	! in routine user_parin (it has to match)
	348
	349	READ ( 13 ) length
	350	READ ( 13 ) restart_string(1:length)
	351
	352	IF ( restart_string(1:length) /= 'statistic_regions' ) THEN
	353	WRITE( message_string, * ) 'statistic_regions not found in data ', &
	354	'from prior run on PE ', myid
	355	CALL message( 'rrd_global', 'PA0301', 1, 2, 0, 6, 0 )
	356	ENDIF
	357	READ ( 13 ) statistic_regions
[3294]	358
[4495]	359	!
	360	!-- The following global arrays (better to say, they have the same size and values on each
	361	!-- subdomain) are by default allocated in routine parin, but not in case of restarts!
[2894]	362	IF ( .NOT. ALLOCATED( ug ) ) THEN
[4495]	363	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	364	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	365	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[4131]	366	hom(0:nz+1,2,pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0:statistic_regions), &
	367	hom_sum(0:nz+1,pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0:statistic_regions) )
[2894]	368	ENDIF
	369
	370	!
[3294]	371	!-- Now read all control parameters:
	372	!-- Caution: When the following read instructions have been changed, the
	373	!-- ------- version number stored in the variable binary_version_global has
	374	!-- to be increased. The same changes must also be done in
	375	!-- wrd_write_global.
[2894]	376	READ ( 13 ) length
	377	READ ( 13 ) restart_string(1:length)
	378
	379	DO WHILE ( restart_string(1:length) /= 'binary_version_local' )
	380
	381	found = .FALSE.
	382
	383	SELECT CASE ( restart_string(1:length) )
	384
	385	CASE ( 'advected_distance_x' )
	386	READ ( 13 ) advected_distance_x
	387	CASE ( 'advected_distance_y' )
	388	READ ( 13 ) advected_distance_y
	389	CASE ( 'alpha_surface' )
	390	READ ( 13 ) alpha_surface
	391	CASE ( 'average_count_pr' )
	392	READ ( 13 ) average_count_pr
	393	CASE ( 'average_count_sp' )
	394	READ ( 13 ) average_count_sp
	395	CASE ( 'average_count_3d' )
	396	READ ( 13 ) average_count_3d
	397	CASE ( 'bc_e_b' )
	398	READ ( 13 ) bc_e_b
	399	CASE ( 'bc_lr' )
	400	READ ( 13 ) bc_lr
	401	CASE ( 'bc_ns' )
	402	READ ( 13 ) bc_ns
	403	CASE ( 'bc_p_b' )
	404	READ ( 13 ) bc_p_b
	405	CASE ( 'bc_p_t' )
	406	READ ( 13 ) bc_p_t
	407	CASE ( 'bc_pt_b' )
	408	READ ( 13 ) bc_pt_b
	409	CASE ( 'bc_pt_t' )
	410	READ ( 13 ) bc_pt_t
	411	CASE ( 'bc_pt_t_val' )
	412	READ ( 13 ) bc_pt_t_val
	413	CASE ( 'bc_q_b' )
	414	READ ( 13 ) bc_q_b
	415	CASE ( 'bc_q_t' )
	416	READ ( 13 ) bc_q_t
	417	CASE ( 'bc_q_t_val' )
	418	READ ( 13 ) bc_q_t_val
	419	CASE ( 'bc_s_b' )
	420	READ ( 13 ) bc_s_b
	421	CASE ( 'bc_s_t' )
	422	READ ( 13 ) bc_s_t
	423	CASE ( 'bc_uv_b' )
	424	READ ( 13 ) bc_uv_b
	425	CASE ( 'bc_uv_t' )
	426	READ ( 13 ) bc_uv_t
	427	CASE ( 'building_height' )
	428	READ ( 13 ) building_height
	429	CASE ( 'building_length_x' )
	430	READ ( 13 ) building_length_x
	431	CASE ( 'building_length_y' )
	432	READ ( 13 ) building_length_y
	433	CASE ( 'building_wall_left' )
	434	READ ( 13 ) building_wall_left
	435	CASE ( 'building_wall_south' )
	436	READ ( 13 ) building_wall_south
	437	CASE ( 'call_psolver_at_all_substeps' )
	438	READ ( 13 ) call_psolver_at_all_substeps
	439	CASE ( 'canyon_height' )
	440	READ ( 13 ) canyon_height
	441	CASE ( 'canyon_wall_left' )
	442	READ ( 13 ) canyon_wall_left
	443	CASE ( 'canyon_wall_south' )
	444	READ ( 13 ) canyon_wall_south
	445	CASE ( 'canyon_width_x' )
	446	READ ( 13 ) canyon_width_x
	447	CASE ( 'canyon_width_y' )
	448	READ ( 13 ) canyon_width_y
	449	CASE ( 'cfl_factor' )
	450	READ ( 13 ) cfl_factor
	451	CASE ( 'cloud_droplets' )
	452	READ ( 13 ) cloud_droplets
	453	CASE ( 'collective_wait' )
	454	READ ( 13 ) collective_wait
	455	CASE ( 'conserve_volume_flow' )
	456	READ ( 13 ) conserve_volume_flow
	457	CASE ( 'conserve_volume_flow_mode' )
	458	READ ( 13 ) conserve_volume_flow_mode
	459	CASE ( 'constant_flux_layer' )
	460	READ ( 13 ) constant_flux_layer
	461	CASE ( 'coupling_start_time' )
	462	READ ( 13 ) coupling_start_time
	463	CASE ( 'current_timestep_number' )
	464	READ ( 13 ) current_timestep_number
	465	CASE ( 'cycle_mg' )
	466	READ ( 13 ) cycle_mg
	467	CASE ( 'damp_level_1d' )
	468	READ ( 13 ) damp_level_1d
[4227]	469	CASE ( 'origin_date_time' )
	470	READ ( 13 ) origin_date_time
[2894]	471	CASE ( 'dissipation_1d' )
	472	READ ( 13 ) dissipation_1d
	473	CASE ( 'do2d_xy_time_count' )
	474	READ ( 13 ) do2d_xy_time_count
	475	CASE ( 'do2d_xz_time_count' )
	476	READ ( 13 ) do2d_xz_time_count
	477	CASE ( 'do2d_yz_time_count' )
	478	READ ( 13 ) do2d_yz_time_count
	479	CASE ( 'do3d_time_count' )
	480	READ ( 13 ) do3d_time_count
	481	CASE ( 'dp_external' )
	482	READ ( 13 ) dp_external
	483	CASE ( 'dp_level_b' )
	484	READ ( 13 ) dp_level_b
	485	CASE ( 'dp_smooth' )
	486	READ ( 13 ) dp_smooth
	487	CASE ( 'dpdxy' )
	488	READ ( 13 ) dpdxy
	489	CASE ( 'dt_3d' )
	490	READ ( 13 ) dt_3d
	491	CASE ( 'dt_pr_1d' )
	492	READ ( 13 ) dt_pr_1d
	493	CASE ( 'dt_run_control_1d' )
	494	READ ( 13 ) dt_run_control_1d
	495	CASE ( 'dx' )
	496	READ ( 13 ) dx
	497	CASE ( 'dy' )
	498	READ ( 13 ) dy
	499	CASE ( 'dz' )
	500	READ ( 13 ) dz
	501	CASE ( 'dz_max' )
	502	READ ( 13 ) dz_max
	503	CASE ( 'dz_stretch_factor' )
	504	READ ( 13 ) dz_stretch_factor
[3065]	505	CASE ( 'dz_stretch_factor_array' )
	506	READ ( 13 ) dz_stretch_factor_array
[2894]	507	CASE ( 'dz_stretch_level' )
	508	READ ( 13 ) dz_stretch_level
[3065]	509	CASE ( 'dz_stretch_level_end' )
	510	READ ( 13 ) dz_stretch_level_end
	511	CASE ( 'dz_stretch_level_start' )
	512	READ ( 13 ) dz_stretch_level_start
[2894]	513	CASE ( 'e_min' )
	514	READ ( 13 ) e_min
	515	CASE ( 'end_time_1d' )
	516	READ ( 13 ) end_time_1d
	517	CASE ( 'fft_method' )
	518	READ ( 13 ) fft_method
	519	CASE ( 'first_call_lpm' )
	520	READ ( 13 ) first_call_lpm
	521	CASE ( 'galilei_transformation' )
	522	READ ( 13 ) galilei_transformation
	523	CASE ( 'hom' )
	524	READ ( 13 ) hom
	525	CASE ( 'hom_sum' )
	526	READ ( 13 ) hom_sum
	527	CASE ( 'humidity' )
	528	READ ( 13 ) humidity
	529	CASE ( 'inflow_damping_factor' )
	530	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	531	ALLOCATE( inflow_damping_factor(0:nz+1) )
	532	ENDIF
	533	READ ( 13 ) inflow_damping_factor
	534	CASE ( 'inflow_damping_height' )
	535	READ ( 13 ) inflow_damping_height
	536	CASE ( 'inflow_damping_width' )
	537	READ ( 13 ) inflow_damping_width
	538	CASE ( 'inflow_disturbance_begin' )
	539	READ ( 13 ) inflow_disturbance_begin
	540	CASE ( 'inflow_disturbance_end' )
	541	READ ( 13 ) inflow_disturbance_end
	542	CASE ( 'km_constant' )
	543	READ ( 13 ) km_constant
	544	CASE ( 'large_scale_forcing' )
	545	READ ( 13 ) large_scale_forcing
	546	CASE ( 'large_scale_subsidence' )
	547	READ ( 13 ) large_scale_subsidence
	548	CASE ( 'latitude' )
	549	READ ( 13 ) latitude
	550	CASE ( 'longitude' )
	551	READ ( 13 ) longitude
	552	CASE ( 'loop_optimization' )
	553	READ ( 13 ) loop_optimization
	554	CASE ( 'masking_method' )
	555	READ ( 13 ) masking_method
	556	CASE ( 'mean_inflow_profiles' )
	557	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[3288]	558	ALLOCATE( mean_inflow_profiles(0:nz+1,1:num_mean_inflow_profiles) )
[2894]	559	ENDIF
	560	READ ( 13 ) mean_inflow_profiles
	561	CASE ( 'mg_cycles' )
	562	READ ( 13 ) mg_cycles
	563	CASE ( 'mg_switch_to_pe0_level' )
	564	READ ( 13 ) mg_switch_to_pe0_level
	565	CASE ( 'mixing_length_1d' )
	566	READ ( 13 ) mixing_length_1d
	567	CASE ( 'momentum_advec' )
	568	READ ( 13 ) momentum_advec
	569	CASE ( 'netcdf_precision' )
	570	READ ( 13 ) netcdf_precision
	571	CASE ( 'neutral' )
	572	READ ( 13 ) neutral
	573	CASE ( 'ngsrb' )
	574	READ ( 13 ) ngsrb
	575	CASE ( 'nsor' )
	576	READ ( 13 ) nsor
	577	CASE ( 'nsor_ini' )
	578	READ ( 13 ) nsor_ini
	579	CASE ( 'nudging' )
	580	READ ( 13 ) nudging
	581	CASE ( 'num_leg' )
	582	READ ( 13 ) num_leg
	583	CASE ( 'nx' )
	584	READ ( 13 ) nx
	585	nx_on_file = nx
	586	CASE ( 'ny' )
	587	READ ( 13 ) ny
	588	ny_on_file = ny
[3294]	589	CASE ( 'ocean_mode' )
	590	READ ( 13 ) ocean_mode
[2894]	591	CASE ( 'omega' )
	592	READ ( 13 ) omega
	593	CASE ( 'omega_sor' )
	594	READ ( 13 ) omega_sor
	595	CASE ( 'output_for_t0' )
	596	READ (13) output_for_t0
	597	CASE ( 'passive_scalar' )
	598	READ ( 13 ) passive_scalar
	599	CASE ( 'prandtl_number' )
	600	READ ( 13 ) prandtl_number
	601	CASE ( 'psolver' )
	602	READ ( 13 ) psolver
	603	CASE ( 'pt_damping_factor' )
	604	READ ( 13 ) pt_damping_factor
	605	CASE ( 'pt_damping_width' )
	606	READ ( 13 ) pt_damping_width
	607	CASE ( 'pt_init' )
	608	READ ( 13 ) pt_init
	609	CASE ( 'pt_reference' )
	610	READ ( 13 ) pt_reference
	611	CASE ( 'pt_surface' )
	612	READ ( 13 ) pt_surface
	613	CASE ( 'pt_surface_initial_change' )
	614	READ ( 13 ) pt_surface_initial_change
	615	CASE ( 'pt_vertical_gradient' )
	616	READ ( 13 ) pt_vertical_gradient
	617	CASE ( 'pt_vertical_gradient_level' )
	618	READ ( 13 ) pt_vertical_gradient_level
	619	CASE ( 'pt_vertical_gradient_level_ind' )
	620	READ ( 13 ) pt_vertical_gradient_level_ind
	621	CASE ( 'q_init' )
	622	READ ( 13 ) q_init
	623	CASE ( 'q_surface' )
	624	READ ( 13 ) q_surface
	625	CASE ( 'q_surface_initial_change' )
	626	READ ( 13 ) q_surface_initial_change
	627	CASE ( 'q_vertical_gradient' )
	628	READ ( 13 ) q_vertical_gradient
	629	CASE ( 'q_vertical_gradient_level' )
	630	READ ( 13 ) q_vertical_gradient_level
	631	CASE ( 'q_vertical_gradient_level_ind' )
	632	READ ( 13 ) q_vertical_gradient_level_ind
	633	CASE ( 'random_generator' )
	634	READ ( 13 ) random_generator
	635	CASE ( 'random_heatflux' )
	636	READ ( 13 ) random_heatflux
	637	CASE ( 'rans_mode' )
	638	READ ( 13 ) rans_mode
	639	CASE ( 'rayleigh_damping_factor' )
	640	READ ( 13 ) rayleigh_damping_factor
	641	CASE ( 'rayleigh_damping_height' )
	642	READ ( 13 ) rayleigh_damping_height
	643	CASE ( 'recycling_width' )
	644	READ ( 13 ) recycling_width
	645	CASE ( 'ref_state' )
	646	READ ( 13 ) ref_state
	647	CASE ( 'reference_state' )
	648	READ ( 13 ) reference_state
	649	CASE ( 'residual_limit' )
	650	READ ( 13 ) residual_limit
	651	CASE ( 'roughness_length' )
	652	READ ( 13 ) roughness_length
	653	CASE ( 'run_coupled' )
	654	READ ( 13 ) run_coupled
	655	CASE ( 'runnr' )
	656	READ ( 13 ) runnr
	657	CASE ( 's_init' )
	658	READ ( 13 ) s_init
	659	CASE ( 's_surface' )
	660	READ ( 13 ) s_surface
	661	CASE ( 's_surface_initial_change' )
	662	READ ( 13 ) s_surface_initial_change
	663	CASE ( 's_vertical_gradient' )
	664	READ ( 13 ) s_vertical_gradient
	665	CASE ( 's_vertical_gradient_level' )
	666	READ ( 13 ) s_vertical_gradient_level
	667	CASE ( 's_vertical_gradient_level_ind' )
	668	READ ( 13 ) s_vertical_gradient_level_ind
	669	CASE ( 'scalar_advec' )
	670	READ ( 13 ) scalar_advec
	671	CASE ( 'simulated_time' )
	672	READ ( 13 ) simulated_time
[2956]	673	CASE ( 'spectrum_x' )
	674	IF ( .NOT. ALLOCATED( spectrum_x ) ) THEN
	675	ALLOCATE( spectrum_x( 1:nx/2, 1:100, 1:10 ) )
	676	ENDIF
	677	READ ( 13 ) spectrum_x
	678	CASE ( 'spectrum_y' )
	679	IF ( .NOT. ALLOCATED( spectrum_y ) ) THEN
	680	ALLOCATE( spectrum_y( 1:ny/2, 1:100, 1:10 ) )
	681	ENDIF
	682	READ ( 13 ) spectrum_y
[2921]	683	CASE ( 'spinup_time' )
	684	READ ( 13 ) spinup_time
[4495]	685	CASE ( 'subs_vertical_gradient' )
	686	READ ( 13 ) subs_vertical_gradient
	687	CASE ( 'subs_vertical_gradient_level' )
	688	READ ( 13 ) subs_vertical_gradient_level
	689	CASE ( 'subs_vertical_gradient_level_i' )
	690	READ ( 13 ) subs_vertical_gradient_level_i
[2894]	691	CASE ( 'surface_heatflux' )
	692	READ ( 13 ) surface_heatflux
	693	CASE ( 'surface_pressure' )
	694	READ ( 13 ) surface_pressure
	695	CASE ( 'surface_scalarflux' )
	696	READ ( 13 ) surface_scalarflux
	697	CASE ( 'surface_waterflux' )
	698	READ ( 13 ) surface_waterflux
	699	CASE ( 'time_coupling' )
	700	READ ( 13 ) time_coupling
	701	CASE ( 'time_disturb' )
	702	READ ( 13 ) time_disturb
	703	CASE ( 'time_do2d_xy' )
	704	READ ( 13 ) time_do2d_xy
	705	CASE ( 'time_do2d_xz' )
	706	READ ( 13 ) time_do2d_xz
	707	CASE ( 'time_do2d_yz' )
	708	READ ( 13 ) time_do2d_yz
	709	CASE ( 'time_do3d' )
	710	READ ( 13 ) time_do3d
	711	CASE ( 'time_do_av' )
	712	READ ( 13 ) time_do_av
	713	CASE ( 'time_do_sla' )
	714	READ ( 13 ) time_do_sla
	715	CASE ( 'time_domask' )
	716	READ ( 13 ) time_domask
	717	CASE ( 'time_dopr' )
	718	READ ( 13 ) time_dopr
	719	CASE ( 'time_dopr_av' )
	720	READ ( 13 ) time_dopr_av
	721	CASE ( 'time_dopr_listing' )
	722	READ ( 13 ) time_dopr_listing
	723	CASE ( 'time_dopts' )
	724	READ ( 13 ) time_dopts
	725	CASE ( 'time_dosp' )
	726	READ ( 13 ) time_dosp
	727	CASE ( 'time_dots' )
	728	READ ( 13 ) time_dots
[4802]	729	CASE ( 'time_indoor' )
	730	READ ( 13 ) time_indoor
[2894]	731	CASE ( 'time_radiation' )
	732	READ ( 13 ) time_radiation
	733	CASE ( 'time_restart' )
	734	READ ( 13 ) time_restart
	735	CASE ( 'time_run_control' )
	736	READ ( 13 ) time_run_control
	737	CASE ( 'time_since_reference_point' )
	738	READ ( 13 ) time_since_reference_point
[3988]	739	CASE ( 'time_virtual_measurement' )
	740	READ ( 13 ) time_virtual_measurement
[2894]	741	CASE ( 'timestep_scheme' )
	742	READ ( 13 ) timestep_scheme
	743	CASE ( 'top_heatflux' )
	744	READ ( 13 ) top_heatflux
	745	CASE ( 'top_momentumflux_u' )
	746	READ ( 13 ) top_momentumflux_u
	747	CASE ( 'top_momentumflux_v' )
	748	READ ( 13 ) top_momentumflux_v
	749	CASE ( 'top_scalarflux' )
	750	READ ( 13 ) top_scalarflux
	751	CASE ( 'topography' )
	752	READ ( 13 ) topography
	753	CASE ( 'topography_grid_convention' )
	754	READ ( 13 ) topography_grid_convention
	755	CASE ( 'tsc' )
	756	READ ( 13 ) tsc
	757	CASE ( 'tunnel_height' )
	758	READ ( 13 ) tunnel_height
	759	CASE ( 'tunnel_length' )
	760	READ ( 13 ) tunnel_length
	761	CASE ( 'tunnel_wall_depth' )
	762	READ ( 13 ) tunnel_wall_depth
	763	CASE ( 'tunnel_width_x' )
	764	READ ( 13 ) tunnel_width_x
	765	CASE ( 'tunnel_width_y' )
	766	READ ( 13 ) tunnel_width_y
	767	CASE ( 'turbulence_closure' )
	768	READ ( 13 ) turbulence_closure
	769	CASE ( 'turbulent_inflow' )
	770	READ ( 13 ) turbulent_inflow
	771	CASE ( 'u_bulk' )
	772	READ ( 13 ) u_bulk
	773	CASE ( 'u_init' )
	774	READ ( 13 ) u_init
	775	CASE ( 'u_max' )
	776	READ ( 13 ) u_max
	777	CASE ( 'u_max_ijk' )
	778	READ ( 13 ) u_max_ijk
	779	CASE ( 'ug' )
	780	READ ( 13 ) ug
	781	CASE ( 'ug_surface' )
	782	READ ( 13 ) ug_surface
	783	CASE ( 'ug_vertical_gradient' )
	784	READ ( 13 ) ug_vertical_gradient
	785	CASE ( 'ug_vertical_gradient_level' )
	786	READ ( 13 ) ug_vertical_gradient_level
	787	CASE ( 'ug_vertical_gradient_level_ind' )
	788	READ ( 13 ) ug_vertical_gradient_level_ind
	789	CASE ( 'use_surface_fluxes' )
	790	READ ( 13 ) use_surface_fluxes
	791	CASE ( 'use_top_fluxes' )
	792	READ ( 13 ) use_top_fluxes
	793	CASE ( 'use_ug_for_galilei_tr' )
	794	READ ( 13 ) use_ug_for_galilei_tr
	795	CASE ( 'use_upstream_for_tke' )
	796	READ ( 13 ) use_upstream_for_tke
	797	CASE ( 'v_bulk' )
	798	READ ( 13 ) v_bulk
	799	CASE ( 'v_init' )
	800	READ ( 13 ) v_init
	801	CASE ( 'v_max' )
	802	READ ( 13 ) v_max
	803	CASE ( 'v_max_ijk' )
	804	READ ( 13 ) v_max_ijk
	805	CASE ( 'vg' )
	806	READ ( 13 ) vg
	807	CASE ( 'vg_surface' )
	808	READ ( 13 ) vg_surface
	809	CASE ( 'vg_vertical_gradient' )
	810	READ ( 13 ) vg_vertical_gradient
	811	CASE ( 'vg_vertical_gradient_level' )
	812	READ ( 13 ) vg_vertical_gradient_level
	813	CASE ( 'vg_vertical_gradient_level_ind' )
	814	READ ( 13 ) vg_vertical_gradient_level_ind
	815	CASE ( 'virtual_flight' )
	816	READ ( 13 ) virtual_flight
	817	CASE ( 'volume_flow_area' )
	818	READ ( 13 ) volume_flow_area
	819	CASE ( 'volume_flow_initial' )
	820	READ ( 13 ) volume_flow_initial
	821	CASE ( 'w_max' )
	822	READ ( 13 ) w_max
	823	CASE ( 'w_max_ijk' )
	824	READ ( 13 ) w_max_ijk
	825	CASE ( 'wall_adjustment' )
	826	READ ( 13 ) wall_adjustment
	827	CASE ( 'wall_heatflux' )
	828	READ ( 13 ) wall_heatflux
	829	CASE ( 'wall_humidityflux' )
	830	READ ( 13 ) wall_humidityflux
	831	CASE ( 'wall_scalarflux' )
	832	READ ( 13 ) wall_scalarflux
	833	CASE ( 'y_shift' )
	834	READ ( 13 ) y_shift
	835	CASE ( 'z0h_factor' )
	836	READ ( 13 ) z0h_factor
	837	CASE ( 'zeta_max' )
	838	READ ( 13 ) zeta_max
	839	CASE ( 'zeta_min' )
	840	READ ( 13 ) zeta_min
[3003]	841	CASE ( 'z_i' )
	842	READ ( 13 ) z_i
[2894]	843
	844	CASE DEFAULT
[3294]	845	!
	846	!-- Read global variables from of other modules
[3766]	847	CALL module_interface_rrd_global( found )
[2894]	848
	849	IF ( .NOT. found ) THEN
	850	WRITE( message_string, * ) 'unknown variable named "', &
	851	restart_string(1:length), &
[4431]	852	'" found in global data from ', &
[2894]	853	'prior run on PE ', myid
	854	CALL message( 'rrd_global', 'PA0302', 1, 2, 0, 6, 0 )
[4431]	855
[2894]	856	ENDIF
	857
	858	END SELECT
	859	!
	860	!-- Read next string
	861	READ ( 13 ) length
[4431]	862	READ ( 13 ) restart_string(1:length)
[2894]	863
[4495]	864	ENDDO ! End of loop for reading the restart string
	865
	866	CALL close_file( 13 )
	867
[4534]	868	ELSEIF ( restart_data_format_input(1:3) == 'mpi' ) THEN
[4495]	869	!
	870	!-- Read global restart data using MPI-IO
	871	!-- ATTENTION: Arrays need to be read with routine rrd_mpi_io_global_array!
	872	!-- Caution: When any of the following read instructions have been changed, the
	873	!-- ------- version number stored in the variable binary_version_global has
	874	!-- to be increased. The same changes must also be done in
	875	!-- wrd_write_global.
	876	!
	877	!-- Open the MPI-IO restart file.
[4534]	878	CALL rd_mpi_io_open( 'read', 'BININ' // TRIM( coupling_char ), &
	879	open_for_global_io_only = .TRUE. )
[4495]	880
	881	!
	882	!-- Make version number check first
	883	CALL rrd_mpi_io( 'binary_version_global', version_on_file )
	884
[4671]	885	binary_version_global = '5.1'
[4495]	886	IF ( TRIM( version_on_file ) /= TRIM( binary_version_global ) ) THEN
	887	WRITE( message_string, * ) 'version mismatch concerning binary_version_global:', &
	888	'&version on file = "', TRIM( version_on_file ), '"', &
	889	'&version in program = "', TRIM( binary_version_global ), '"'
	890	CALL message( 'rrd_global', 'PA0296', 1, 2, 0, 6, 0 )
	891	ENDIF
	892
	893	CALL rrd_mpi_io( 'numprocs', numprocs_previous_run )
	894	CALL rrd_mpi_io( 'nz' , nz )
	895	CALL rrd_mpi_io( 'max_pr_user', max_pr_user )
	896	CALL rrd_mpi_io( 'statistic_regions', statistic_regions )
	897
	898	!
	899	!-- The following global arrays (better to say, they have the same size and values on each
	900	!-- subdomain) are by default allocated in routine parin, but not in case of restarts!
	901	IF ( .NOT. ALLOCATED( ug ) ) THEN
	902	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	903	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	904	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[4590]	905	hom(0:nz+1,2,pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0:statistic_regions), &
	906	hom_sum(0:nz+1,pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0:statistic_regions) )
[4495]	907	ENDIF
	908
	909	CALL rrd_mpi_io( 'advected_distance_x', advected_distance_x )
	910	CALL rrd_mpi_io( 'advected_distance_y', advected_distance_y )
	911	CALL rrd_mpi_io( 'alpha_surface', alpha_surface )
	912	CALL rrd_mpi_io( 'average_count_pr', average_count_pr )
	913	CALL rrd_mpi_io( 'average_count_sp', average_count_sp )
	914	CALL rrd_mpi_io( 'average_count_3d', average_count_3d )
	915	CALL rrd_mpi_io( 'bc_e_b', bc_e_b )
	916	CALL rrd_mpi_io( 'bc_lr', bc_lr )
	917	CALL rrd_mpi_io( 'bc_ns', bc_ns )
	918	CALL rrd_mpi_io( 'bc_p_b', bc_p_b )
	919	CALL rrd_mpi_io( 'bc_p_t', bc_p_t )
	920	CALL rrd_mpi_io( 'bc_pt_b', bc_pt_b )
	921	CALL rrd_mpi_io( 'bc_pt_t', bc_pt_t )
	922	CALL rrd_mpi_io( 'bc_pt_t_val', bc_pt_t_val )
	923	CALL rrd_mpi_io( 'bc_q_b', bc_q_b )
	924	CALL rrd_mpi_io( 'bc_q_t', bc_q_t )
	925	CALL rrd_mpi_io( 'bc_q_t_val', bc_q_t_val )
	926	CALL rrd_mpi_io( 'bc_s_b', bc_s_b )
	927	CALL rrd_mpi_io( 'bc_s_t', bc_s_t )
	928	CALL rrd_mpi_io( 'bc_uv_b', bc_uv_b )
	929	CALL rrd_mpi_io( 'bc_uv_t', bc_uv_t )
	930	CALL rrd_mpi_io( 'biometeorology', biometeorology )
	931	CALL rrd_mpi_io( 'building_height', building_height )
	932	CALL rrd_mpi_io( 'building_length_x', building_length_x )
	933	CALL rrd_mpi_io( 'building_length_y', building_length_y )
	934	CALL rrd_mpi_io( 'building_wall_left', building_wall_left )
	935	CALL rrd_mpi_io( 'building_wall_south', building_wall_south )
	936	CALL rrd_mpi_io( 'bulk_cloud_model', bulk_cloud_model )
	937	CALL rrd_mpi_io( 'call_psolver_at_all_substeps', call_psolver_at_all_substeps )
	938	CALL rrd_mpi_io( 'canyon_height', canyon_height )
	939	CALL rrd_mpi_io( 'canyon_wall_left', canyon_wall_left )
	940	CALL rrd_mpi_io( 'canyon_wall_south', canyon_wall_south )
	941	CALL rrd_mpi_io( 'canyon_width_x', canyon_width_x )
	942	CALL rrd_mpi_io( 'canyon_width_y', canyon_width_y )
	943	CALL rrd_mpi_io( 'cfl_factor', cfl_factor )
	944	CALL rrd_mpi_io( 'cloud_droplets', cloud_droplets )
	945	CALL rrd_mpi_io( 'collective_wait', collective_wait )
	946	CALL rrd_mpi_io( 'conserve_volume_flow', conserve_volume_flow )
	947	CALL rrd_mpi_io( 'conserve_volume_flow_mode', conserve_volume_flow_mode )
	948	CALL rrd_mpi_io( 'constant_flux_layer', constant_flux_layer )
	949	CALL rrd_mpi_io( 'coupling_start_time', coupling_start_time )
	950	CALL rrd_mpi_io( 'current_timestep_number', current_timestep_number )
	951	CALL rrd_mpi_io( 'cycle_mg', cycle_mg )
	952	CALL rrd_mpi_io( 'damp_level_1d', damp_level_1d )
	953	CALL rrd_mpi_io( 'dissipation_1d', dissipation_1d )
	954	CALL rrd_mpi_io_global_array( 'do2d_xy_time_count', do2d_xy_time_count )
	955	CALL rrd_mpi_io_global_array( 'do2d_xz_time_count', do2d_xz_time_count )
	956	CALL rrd_mpi_io_global_array( 'do2d_yz_time_count', do2d_yz_time_count )
	957	CALL rrd_mpi_io_global_array( 'do3d_time_count', do3d_time_count )
	958	CALL rrd_mpi_io( 'dp_external', dp_external )
	959	CALL rrd_mpi_io( 'dp_level_b', dp_level_b )
	960	CALL rrd_mpi_io( 'dp_smooth', dp_smooth )
	961	CALL rrd_mpi_io_global_array( 'dpdxy', dpdxy )
	962	CALL rrd_mpi_io( 'dt_3d', dt_3d )
	963	CALL rrd_mpi_io( 'dt_pr_1d', dt_pr_1d )
	964	CALL rrd_mpi_io( 'dt_run_control_1d', dt_run_control_1d )
	965	CALL rrd_mpi_io( 'dx', dx )
	966	CALL rrd_mpi_io( 'dy', dy )
	967	CALL rrd_mpi_io_global_array( 'dz', dz )
	968	CALL rrd_mpi_io( 'dz_max', dz_max )
	969	CALL rrd_mpi_io( 'dz_stretch_factor', dz_stretch_factor )
	970	CALL rrd_mpi_io_global_array( 'dz_stretch_factor_array', dz_stretch_factor_array )
	971	CALL rrd_mpi_io( 'dz_stretch_level', dz_stretch_level )
	972	CALL rrd_mpi_io_global_array( 'dz_stretch_level_end', dz_stretch_level_end )
	973	CALL rrd_mpi_io_global_array( 'dz_stretch_level_start', dz_stretch_level_start )
	974	CALL rrd_mpi_io( 'e_min', e_min )
	975	CALL rrd_mpi_io( 'end_time_1d', end_time_1d )
	976	CALL rrd_mpi_io( 'fft_method', fft_method )
	977	CALL rrd_mpi_io( 'first_call_lpm', first_call_lpm )
	978	CALL rrd_mpi_io( 'galilei_transformation', galilei_transformation )
	979	CALL rrd_mpi_io( 'gust_module_enabled', gust_module_enabled )
	980	CALL rrd_mpi_io_global_array( 'hom', hom )
	981	CALL rrd_mpi_io_global_array( 'hom_sum', hom_sum )
	982	CALL rrd_mpi_io( 'humidity', humidity )
	983	CALL rd_mpi_io_check_array( 'inflow_damping_factor', found = array_found )
	984	IF ( array_found ) THEN
	985	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	986	ALLOCATE( inflow_damping_factor(0:nz+1) )
	987	ENDIF
	988	CALL rrd_mpi_io_global_array( 'inflow_damping_factor', inflow_damping_factor )
	989	ENDIF
	990	CALL rrd_mpi_io( 'inflow_damping_height', inflow_damping_height )
	991	CALL rrd_mpi_io( 'inflow_damping_width', inflow_damping_width )
	992	CALL rrd_mpi_io( 'inflow_disturbance_begin', inflow_disturbance_begin )
	993	CALL rrd_mpi_io( 'inflow_disturbance_end', inflow_disturbance_end )
	994	CALL rrd_mpi_io( 'km_constant', km_constant )
	995	CALL rrd_mpi_io( 'large_scale_forcing', large_scale_forcing )
	996	CALL rrd_mpi_io( 'large_scale_subsidence', large_scale_subsidence )
	997	CALL rrd_mpi_io( 'latitude', latitude )
	998	CALL rrd_mpi_io( 'longitude', longitude )
	999	CALL rrd_mpi_io( 'loop_optimization', loop_optimization )
	1000	CALL rrd_mpi_io( 'masking_method', masking_method )
	1001	CALL rd_mpi_io_check_array( 'mean_inflow_profiles', found = array_found )
	1002	IF ( array_found) THEN
	1003	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	1004	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
	1005	ENDIF
	1006	CALL rrd_mpi_io_global_array( 'mean_inflow_profiles', mean_inflow_profiles )
	1007	ENDIF
	1008	CALL rrd_mpi_io( 'mg_cycles', mg_cycles )
	1009	CALL rrd_mpi_io( 'mg_switch_to_pe0_level', mg_switch_to_pe0_level )
	1010	CALL rrd_mpi_io( 'mixing_length_1d', mixing_length_1d )
	1011	CALL rrd_mpi_io( 'momentum_advec', momentum_advec )
	1012	!
	1013	!-- There is no module procedure for CHARACTER arrays
	1014	DO i = 1, SIZE( netcdf_precision , 1 )
	1015	WRITE( tmp_name, '(A,I2.2)' ) 'netcdf_precision_', i
	1016	CALL rrd_mpi_io( TRIM( tmp_name ), netcdf_precision(i) )
[2894]	1017	ENDDO
[4495]	1018	CALL rrd_mpi_io( 'neutral', neutral )
	1019	CALL rrd_mpi_io( 'ngsrb', ngsrb )
	1020	CALL rrd_mpi_io( 'nsor', nsor )
	1021	CALL rrd_mpi_io( 'nsor_ini', nsor_ini )
	1022	CALL rrd_mpi_io( 'nudging', nudging )
	1023	CALL rrd_mpi_io( 'num_leg', num_leg )
	1024	CALL rrd_mpi_io( 'nx', nx )
	1025	nx_on_file = nx
	1026	CALL rrd_mpi_io( 'ny', ny )
	1027	ny_on_file = ny
	1028	CALL rrd_mpi_io( 'ocean_mode', ocean_mode )
	1029	CALL rrd_mpi_io( 'omega', omega )
	1030	CALL rrd_mpi_io( 'omega_sor', omega_sor )
[4536]	1031	CALL rrd_mpi_io( 'origin_date_time', origin_date_time )
[4495]	1032	CALL rrd_mpi_io( 'output_for_t0', output_for_t0 )
	1033	CALL rrd_mpi_io( 'particle_advection', particle_advection )
	1034	CALL rrd_mpi_io( 'passive_scalar', passive_scalar )
	1035	CALL rrd_mpi_io( 'prandtl_number', prandtl_number )
	1036	CALL rrd_mpi_io( 'psolver', psolver )
	1037	CALL rrd_mpi_io( 'pt_damping_factor', pt_damping_factor )
	1038	CALL rrd_mpi_io( 'pt_damping_width', pt_damping_width )
	1039	CALL rrd_mpi_io_global_array( 'pt_init', pt_init )
	1040	CALL rrd_mpi_io( 'pt_reference', pt_reference )
	1041	CALL rrd_mpi_io( 'pt_surface', pt_surface )
	1042	CALL rrd_mpi_io( 'pt_surface_initial_change', pt_surface_initial_change )
	1043	CALL rrd_mpi_io_global_array( 'pt_vertical_gradient', pt_vertical_gradient )
	1044	CALL rrd_mpi_io_global_array( 'pt_vertical_gradient_level', pt_vertical_gradient_level )
	1045	CALL rrd_mpi_io_global_array( 'pt_vertical_gradient_level_ind', pt_vertical_gradient_level_ind )
	1046	CALL rrd_mpi_io_global_array( 'q_init', q_init )
	1047	CALL rrd_mpi_io( 'q_surface', q_surface )
	1048	CALL rrd_mpi_io( 'q_surface_initial_change', q_surface_initial_change )
	1049	CALL rrd_mpi_io_global_array( 'q_vertical_gradient', q_vertical_gradient )
	1050	CALL rrd_mpi_io_global_array( 'q_vertical_gradient_level', q_vertical_gradient_level )
	1051	CALL rrd_mpi_io_global_array( 'q_vertical_gradient_level_ind', q_vertical_gradient_level_ind )
	1052	CALL rrd_mpi_io( 'random_generator', random_generator )
	1053	CALL rrd_mpi_io( 'random_heatflux', random_heatflux )
	1054	CALL rrd_mpi_io( 'rans_mode', rans_mode )
	1055	CALL rrd_mpi_io( 'rayleigh_damping_factor', rayleigh_damping_factor )
	1056	CALL rrd_mpi_io( 'rayleigh_damping_height', rayleigh_damping_height )
	1057	CALL rrd_mpi_io( 'recycling_width', recycling_width )
	1058	CALL rrd_mpi_io_global_array( 'ref_state', ref_state )
	1059	CALL rrd_mpi_io( 'reference_state', reference_state )
	1060	CALL rrd_mpi_io( 'residual_limit', residual_limit )
	1061	CALL rrd_mpi_io( 'roughness_length', roughness_length )
	1062	CALL rrd_mpi_io( 'run_coupled', run_coupled )
	1063	CALL rrd_mpi_io( 'runnr', runnr )
	1064	CALL rrd_mpi_io_global_array( 's_init', s_init )
	1065	CALL rrd_mpi_io( 's_surface', s_surface )
	1066	CALL rrd_mpi_io( 's_surface_initial_change', s_surface_initial_change )
	1067	CALL rrd_mpi_io_global_array( 's_vertical_gradient', s_vertical_gradient )
	1068	CALL rrd_mpi_io_global_array( 's_vertical_gradient_level', s_vertical_gradient_level )
	1069	CALL rrd_mpi_io_global_array( 's_vertical_gradient_level_ind', s_vertical_gradient_level_ind )
	1070	CALL rrd_mpi_io( 'scalar_advec', scalar_advec )
	1071	CALL rrd_mpi_io( 'simulated_time', simulated_time )
	1072	CALL rd_mpi_io_check_array( 'spectrum_x', found = array_found )
	1073	IF (array_found ) THEN
	1074	IF ( .NOT. ALLOCATED( spectrum_x ) ) THEN
	1075	ALLOCATE( spectrum_x( 1:nx/2, 1:100, 1:10 ) )
	1076	ENDIF
[4777]	1077	CALL rrd_mpi_io_global_array( 'spectrum_x', spectrum_x )
[4495]	1078	ENDIF
	1079	CALL rd_mpi_io_check_array( 'spectrum_y', found = array_found )
	1080	IF ( array_found ) THEN
	1081	IF ( .NOT. ALLOCATED( spectrum_y ) ) THEN
	1082	ALLOCATE( spectrum_y( 1:ny/2, 1:100, 1:10 ) )
	1083	ENDIF
[4777]	1084	CALL rrd_mpi_io_global_array( 'spectrum_y', spectrum_y )
[4495]	1085	ENDIF
	1086	CALL rrd_mpi_io( 'spinup_time ', spinup_time )
	1087	CALL rrd_mpi_io_global_array( 'subs_vertical_gradient', subs_vertical_gradient )
	1088	CALL rrd_mpi_io_global_array( 'subs_vertical_gradient_level', subs_vertical_gradient_level )
	1089	CALL rrd_mpi_io_global_array( 'subs_vertical_gradient_level_i', subs_vertical_gradient_level_i )
	1090	CALL rrd_mpi_io( 'surface_heatflux', surface_heatflux )
	1091	CALL rrd_mpi_io( 'surface_pressure', surface_pressure )
	1092	CALL rrd_mpi_io( 'surface_output', surface_output )
	1093	CALL rrd_mpi_io( 'surface_scalarflux', surface_scalarflux )
	1094	CALL rrd_mpi_io( 'surface_waterflux', surface_waterflux )
	1095	CALL rrd_mpi_io( 'syn_turb_gen', syn_turb_gen )
	1096	CALL rrd_mpi_io( 'time_coupling', time_coupling )
	1097	CALL rrd_mpi_io( 'time_disturb', time_disturb )
	1098	CALL rrd_mpi_io( 'time_do2d_xy', time_do2d_xy )
	1099	CALL rrd_mpi_io( 'time_do2d_xz', time_do2d_xz )
	1100	CALL rrd_mpi_io( 'time_do2d_yz', time_do2d_yz )
	1101	CALL rrd_mpi_io( 'time_do3d', time_do3d )
	1102	CALL rrd_mpi_io( 'time_do_av', time_do_av )
	1103	CALL rrd_mpi_io( 'time_do_sla', time_do_sla )
	1104	CALL rrd_mpi_io_global_array( 'time_domask', time_domask )
	1105	CALL rrd_mpi_io( 'time_dopr', time_dopr )
	1106	CALL rrd_mpi_io( 'time_dopr_av', time_dopr_av )
	1107	CALL rrd_mpi_io( 'time_dopr_listing', time_dopr_listing )
	1108	CALL rrd_mpi_io( 'time_dopts', time_dopts )
	1109	CALL rrd_mpi_io( 'time_dosp', time_dosp )
	1110	CALL rrd_mpi_io( 'time_dots', time_dots )
[4802]	1111	CALL rrd_mpi_io( 'time_indoor', time_indoor )
[4495]	1112	CALL rrd_mpi_io( 'time_radiation', time_radiation )
	1113	CALL rrd_mpi_io( 'time_restart', time_restart )
	1114	CALL rrd_mpi_io( 'time_run_control', time_run_control )
	1115	CALL rrd_mpi_io( 'time_since_reference_point', time_since_reference_point )
	1116	CALL rrd_mpi_io( 'time_virtual_measurement', time_virtual_measurement )
	1117	CALL rrd_mpi_io( 'timestep_scheme', timestep_scheme )
	1118	CALL rrd_mpi_io( 'top_heatflux', top_heatflux )
	1119	CALL rrd_mpi_io( 'top_momentumflux_u', top_momentumflux_u )
	1120	CALL rrd_mpi_io( 'top_momentumflux_v', top_momentumflux_v )
	1121	CALL rrd_mpi_io( 'top_scalarflux', top_scalarflux )
	1122	CALL rrd_mpi_io( 'topography', topography )
	1123	CALL rrd_mpi_io( 'topography_grid_convention', topography_grid_convention )
	1124	CALL rrd_mpi_io_global_array( 'tsc', tsc )
	1125	CALL rrd_mpi_io( 'tunnel_height', tunnel_height )
	1126	CALL rrd_mpi_io( 'tunnel_length', tunnel_length )
	1127	CALL rrd_mpi_io( 'tunnel_wall_depth', tunnel_wall_depth )
	1128	CALL rrd_mpi_io( 'tunnel_width_x', tunnel_width_x )
	1129	CALL rrd_mpi_io( 'tunnel_width_y', tunnel_width_y )
	1130	CALL rrd_mpi_io( 'turbulence_closure', turbulence_closure )
	1131	CALL rrd_mpi_io( 'turbulent_inflow', turbulent_inflow )
	1132	CALL rrd_mpi_io( 'u_bulk', u_bulk )
	1133	CALL rrd_mpi_io_global_array( 'u_init', u_init )
	1134	CALL rrd_mpi_io( 'u_max', u_max )
	1135	CALL rrd_mpi_io_global_array( 'u_max_ijk', u_max_ijk )
	1136	CALL rrd_mpi_io_global_array( 'ug', ug )
	1137	CALL rrd_mpi_io( 'ug_surface', ug_surface )
	1138	CALL rrd_mpi_io_global_array( 'ug_vertical_gradient', ug_vertical_gradient )
	1139	CALL rrd_mpi_io_global_array( 'ug_vertical_gradient_level', ug_vertical_gradient_level )
	1140	CALL rrd_mpi_io_global_array( 'ug_vertical_gradient_level_ind', ug_vertical_gradient_level_ind )
	1141	CALL rrd_mpi_io( 'use_surface_fluxes', use_surface_fluxes )
	1142	CALL rrd_mpi_io( 'use_top_fluxes', use_top_fluxes )
	1143	CALL rrd_mpi_io( 'use_ug_for_galilei_tr', use_ug_for_galilei_tr )
	1144	CALL rrd_mpi_io( 'use_upstream_for_tke', use_upstream_for_tke )
	1145	CALL rrd_mpi_io( 'user_module_enabled', user_module_enabled )
	1146	CALL rrd_mpi_io( 'v_bulk', v_bulk )
	1147	CALL rrd_mpi_io_global_array( 'v_init', v_init )
	1148	CALL rrd_mpi_io( 'v_max', v_max )
	1149	CALL rrd_mpi_io_global_array( 'v_max_ijk', v_max_ijk )
	1150	CALL rrd_mpi_io_global_array( 'vg', vg )
	1151	CALL rrd_mpi_io( 'vg_surface', vg_surface )
	1152	CALL rrd_mpi_io_global_array( 'vg_vertical_gradient', vg_vertical_gradient )
	1153	CALL rrd_mpi_io_global_array( 'vg_vertical_gradient_level', vg_vertical_gradient_level )
	1154	CALL rrd_mpi_io_global_array( 'vg_vertical_gradient_level_ind', vg_vertical_gradient_level_ind )
	1155	CALL rrd_mpi_io( 'virtual_flight', virtual_flight )
	1156	CALL rrd_mpi_io_global_array( 'volume_flow_area', volume_flow_area )
	1157	CALL rrd_mpi_io_global_array( 'volume_flow_initial', volume_flow_initial )
	1158	CALL rrd_mpi_io( 'w_max', w_max )
	1159	CALL rrd_mpi_io_global_array( 'w_max_ijk', w_max_ijk )
	1160	CALL rrd_mpi_io( 'wall_adjustment', wall_adjustment )
	1161	CALL rrd_mpi_io_global_array( 'wall_heatflux', wall_heatflux )
	1162	CALL rrd_mpi_io_global_array( 'wall_humidityflux', wall_humidityflux )
	1163	CALL rrd_mpi_io_global_array( 'wall_scalarflux', wall_scalarflux )
	1164	CALL rrd_mpi_io( 'y_shift', y_shift )
	1165	CALL rrd_mpi_io( 'z0h_factor', z0h_factor )
	1166	CALL rrd_mpi_io( 'zeta_max', zeta_max )
	1167	CALL rrd_mpi_io( 'zeta_min', zeta_min )
	1168	CALL rrd_mpi_io_global_array( 'z_i', z_i )
[2894]	1169
[4495]	1170	!
	1171	!-- Read global variables from of other modules
	1172	CALL module_interface_rrd_global
[4431]	1173
[4495]	1174	!
[4517]	1175	!-- Close restart file
[4495]	1176	CALL rd_mpi_io_close
[2894]	1177
[4495]	1178	ENDIF
[2894]	1179
[4495]	1180	CALL location_message( 'read global restart data', 'finished' )
[2894]	1181
[4495]	1182	END SUBROUTINE rrd_global
[2894]	1183
[4495]	1184
	1185
[2894]	1186	!------------------------------------------------------------------------------!
	1187	! Description:
	1188	! ------------
	1189	!> Skipping the global control variables from restart-file (binary format)
	1190	!> except some information needed when reading restart data from a previous
	1191	!> run which used a smaller total domain or/and a different domain decomposition
	1192	!> (initializing_actions == 'cyclic_fill').
	1193	!------------------------------------------------------------------------------!
[4580]	1194	SUBROUTINE rrd_read_parts_of_global
[2894]	1195
	1196
[4580]	1197	CHARACTER (LEN=10) :: version_on_file
[4617]	1198	CHARACTER (LEN=20) :: bc_lr_on_file
	1199	CHARACTER (LEN=20) :: bc_ns_on_file
[4580]	1200	CHARACTER (LEN=20) :: momentum_advec_check
	1201	CHARACTER (LEN=20) :: scalar_advec_check
	1202	CHARACTER (LEN=1) :: cdum
[2894]	1203
[4580]	1204	INTEGER(iwp) :: max_pr_user_on_file
	1205	INTEGER(iwp) :: nz_on_file
	1206	INTEGER(iwp) :: statistic_regions_on_file
	1207	INTEGER(iwp) :: tmp_mpru
	1208	INTEGER(iwp) :: tmp_sr
[2894]	1209
[4580]	1210	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	1211	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[2894]	1212
	1213
[4580]	1214	IF ( TRIM( restart_data_format_input ) == 'fortran_binary' ) THEN
	1215	!
	1216	!-- Input in Fortran binary format
[2894]	1217	CALL check_open( 13 )
	1218
	1219	READ ( 13 ) length
	1220	READ ( 13 ) restart_string(1:length)
	1221	READ ( 13 ) version_on_file
	1222
	1223	!
[4580]	1224	!-- Read number of PEs and horizontal index bounds of all PEs used in previous run
[2894]	1225	READ ( 13 ) length
	1226	READ ( 13 ) restart_string(1:length)
	1227
	1228	IF ( restart_string(1:length) /= 'numprocs' ) THEN
	1229	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	1230	'run on PE ', myid
	1231	CALL message( 'rrd_read_parts_of_global', 'PA0297', 1, 2, 0, 6, 0 )
	1232	ENDIF
	1233	READ ( 13 ) numprocs_previous_run
	1234
	1235	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	1236	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	1237	ENDIF
	1238
	1239	READ ( 13 ) length
	1240	READ ( 13 ) restart_string(1:length)
	1241
	1242	IF ( restart_string(1:length) /= 'hor_index_bounds' ) THEN
	1243	WRITE( message_string, * ) 'hor_index_bounds not found in data ', &
	1244	'from prior run on PE ', myid
	1245	CALL message( 'rrd_read_parts_of_global', 'PA0298', 1, 2, 0, 6, 0 )
	1246	ENDIF
	1247	READ ( 13 ) hor_index_bounds_previous_run
	1248
	1249	!
[4580]	1250	!-- Read vertical number of gridpoints and number of different areas used for computing
	1251	!-- statistics. Allocate arrays depending on these values, which are needed for the following
	1252	!-- read instructions.
[2894]	1253	READ ( 13 ) length
	1254	READ ( 13 ) restart_string(1:length)
	1255
	1256	IF ( restart_string(1:length) /= 'nz' ) THEN
	1257	message_string = 'nz not found in restart data file'
	1258	CALL message( 'rrd_read_parts_of_global', 'PA0303', 1, 2, 0, 6, 0 )
	1259	ENDIF
	1260	READ ( 13 ) nz_on_file
	1261	IF ( nz_on_file /= nz ) THEN
	1262	WRITE( message_string, * ) 'mismatch concerning number of ', &
[3045]	1263	'gridpoints along z:', &
[3046]	1264	'&nz on file = "', nz_on_file, '"', &
	1265	'&nz from run = "', nz, '"'
[2894]	1266	CALL message( 'rrd_read_parts_of_global', 'PA0304', 1, 2, 0, 6, 0 )
	1267	ENDIF
	1268
	1269	READ ( 13 ) length
	1270	READ ( 13 ) restart_string(1:length)
	1271
	1272	IF ( restart_string(1:length) /= 'max_pr_user' ) THEN
	1273	message_string = 'max_pr_user not found in restart data file'
	1274	CALL message( 'rrd_read_parts_of_global', 'PA0305', 1, 2, 0, 6, 0 )
	1275	ENDIF
	1276	READ ( 13 ) max_pr_user_on_file
	1277	IF ( max_pr_user_on_file /= max_pr_user ) THEN
	1278	WRITE( message_string, * ) 'number of user profiles on res', &
	1279	'tart data file differs from the ', &
[3046]	1280	'current run:&max_pr_user on file = "',&
[2894]	1281	max_pr_user_on_file, '"', &
[3046]	1282	'&max_pr_user from run = "', &
[2894]	1283	max_pr_user, '"'
	1284	CALL message( 'rrd_read_parts_of_global', 'PA0306', 0, 0, 0, 6, 0 )
	1285	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	1286	ELSE
	1287	tmp_mpru = max_pr_user
	1288	ENDIF
	1289
	1290	READ ( 13 ) length
	1291	READ ( 13 ) restart_string(1:length)
	1292
	1293	IF ( restart_string(1:length) /= 'statistic_regions' ) THEN
	1294	message_string = 'statistic_regions not found in restart data file'
	1295	CALL message( 'rrd_read_parts_of_global', 'PA0307', 1, 2, 0, 6, 0 )
	1296	ENDIF
	1297	READ ( 13 ) statistic_regions_on_file
	1298	IF ( statistic_regions_on_file /= statistic_regions ) THEN
	1299	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[3045]	1300	'differ from the current run:', &
[3046]	1301	'&statistic regions on file = "', &
[2894]	1302	statistic_regions_on_file, '"', &
[3046]	1303	'&statistic regions from run = "', &
[2894]	1304	statistic_regions, '"', &
[3046]	1305	'&statistic data may be lost!'
[2894]	1306	CALL message( 'rrd_read_parts_of_global', 'PA0308', 0, 1, 0, 6, 0 )
	1307	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	1308	ELSE
	1309	tmp_sr = statistic_regions
	1310	ENDIF
	1311
	1312	!
[4580]	1313	!-- Now read and check some control parameters and skip the rest
[2894]	1314	READ ( 13 ) length
	1315	READ ( 13 ) restart_string(1:length)
	1316
	1317	DO WHILE ( restart_string(1:length) /= 'binary_version_local' )
	1318
	1319	SELECT CASE ( restart_string(1:length) )
	1320
	1321	CASE ( 'average_count_pr' )
	1322	READ ( 13 ) average_count_pr
	1323	IF ( average_count_pr /= 0 ) THEN
	1324	WRITE( message_string, * ) 'inflow profiles not ', &
[3046]	1325	'temporally averaged. &Averaging will be ', &
[3637]	1326	'done now using', average_count_pr, &
[2894]	1327	' samples.'
	1328	CALL message( 'rrd_read_parts_of_global', 'PA0309', &
	1329	0, 1, 0, 6, 0 )
	1330	ENDIF
	1331
[4617]	1332	CASE ( 'bc_lr' )
	1333	READ ( 13 ) bc_lr_on_file
	1334	IF ( TRIM( bc_lr_on_file ) /= 'cyclic' ) THEN
	1335	message_string = 'bc_lr in the prerun was set /= "cyclic"'
	1336	CALL message( 'rrd_read_parts_of_global', 'PA0498', 1, 2, 0, 6, 0 )
	1337	ENDIF
	1338
	1339	CASE ( 'bc_ns' )
	1340	READ ( 13 ) bc_ns_on_file
	1341	IF ( TRIM( bc_ns_on_file ) /= 'cyclic' ) THEN
	1342	message_string = 'bc_ns in the prerun was set /= "cyclic"'
	1343	CALL message( 'rrd_read_parts_of_global', 'PA0498', 1, 2, 0, 6, 0 )
	1344	ENDIF
	1345
[2894]	1346	CASE ( 'hom' )
	1347	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	1348	0:statistic_regions_on_file) )
	1349	READ ( 13 ) hom_on_file
	1350	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1351	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
	1352	DEALLOCATE( hom_on_file )
	1353
	1354	CASE ( 'hom_sum' )
	1355	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	1356	0:statistic_regions_on_file) )
	1357	READ ( 13 ) hom_sum_on_file
	1358	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1359	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
	1360	DEALLOCATE( hom_sum_on_file )
	1361
	1362	CASE ( 'momentum_advec' )
	1363	momentum_advec_check = momentum_advec
	1364	READ ( 13 ) momentum_advec
	1365	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) &
	1366	THEN
	1367	WRITE( message_string, * ) 'momentum_advec of the restart ',&
	1368	'run differs from momentum_advec of the ', &
	1369	'initial run.'
	1370	CALL message( 'rrd_read_parts_of_global', 'PA0100', &
	1371	1, 2, 0, 6, 0 )
	1372	ENDIF
	1373
	1374	CASE ( 'nx' )
	1375	READ ( 13 ) nx_on_file
	1376
	1377	CASE ( 'ny' )
	1378	READ ( 13 ) ny_on_file
	1379
	1380	CASE ( 'ref_state' )
	1381	READ ( 13 ) ref_state
	1382
	1383	CASE ( 'scalar_advec' )
	1384	scalar_advec_check = scalar_advec
	1385	READ ( 13 ) scalar_advec
	1386	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) &
	1387	THEN
	1388	WRITE( message_string, * ) 'scalar_advec of the restart ', &
	1389	'run differs from scalar_advec of the ', &
	1390	'initial run.'
	1391	CALL message( 'rrd_read_parts_of_global', 'PA0101', &
	1392	1, 2, 0, 6, 0 )
	1393	ENDIF
	1394
	1395	CASE DEFAULT
	1396
	1397	READ ( 13 ) cdum
	1398
	1399	END SELECT
	1400
	1401	READ ( 13 ) length
	1402	READ ( 13 ) restart_string(1:length)
	1403
	1404	ENDDO
	1405
[4580]	1406	CALL close_file( 13 )
	1407
	1408	ELSEIF ( restart_data_format_input(1:3) == 'mpi' ) THEN
[2894]	1409	!
[4580]	1410	!-- Open the MPI-IO restart file.
	1411	CALL rd_mpi_io_open( 'read', 'BININ' // TRIM( coupling_char ), &
	1412	open_for_global_io_only = .TRUE. )
	1413
	1414	!
	1415	!-- Read vertical number of gridpoints and number of different areas used for computing
	1416	!-- statistics. Allocate arrays depending on these values, which are required for the following
	1417	!-- read instructions.
	1418	CALL rrd_mpi_io( 'nz', nz_on_file )
	1419	IF ( nz_on_file /= nz ) THEN
	1420	WRITE( message_string, * ) 'mismatch concerning number of gridpoints along z:', &
	1421	'&nz on file = "', nz_on_file, '"', &
	1422	'&nz from run = "', nz, '"'
	1423	CALL message( 'rrd_read_parts_of_global', 'PA0304', 1, 2, 0, 6, 0 )
	1424	ENDIF
	1425
	1426	CALL rrd_mpi_io( 'max_pr_user', max_pr_user_on_file )
	1427	IF ( max_pr_user_on_file /= max_pr_user ) THEN
	1428	WRITE( message_string, * ) 'number of user profiles on restart data file differs from ', &
	1429	'the current run:&max_pr_user on file = "', &
	1430	max_pr_user_on_file, '" &max_pr_user from run = "', &
	1431	max_pr_user, '"'
	1432	CALL message( 'rrd_read_parts_of_global', 'PA0306', 0, 0, 0, 6, 0 )
	1433	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	1434	ELSE
	1435	tmp_mpru = max_pr_user
	1436	ENDIF
	1437
	1438	CALL rrd_mpi_io( 'statistic_regions', statistic_regions_on_file )
	1439	IF ( statistic_regions_on_file /= statistic_regions ) THEN
	1440	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	1441	'differ from the current run:', &
	1442	'&statistic regions on file = "', &
	1443	statistic_regions_on_file, '"', &
	1444	'&statistic regions from run = "', &
	1445	statistic_regions, '"', &
	1446	'&statistic data may be lost!'
	1447	CALL message( 'rrd_read_parts_of_global', 'PA0308', 0, 1, 0, 6, 0 )
	1448	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	1449	ELSE
	1450	tmp_sr = statistic_regions
	1451	ENDIF
	1452
	1453	!
	1454	!-- Now read and check some control parameters and skip the rest.
	1455	CALL rrd_mpi_io( 'average_count_pr', average_count_pr )
	1456	IF ( average_count_pr /= 0 ) THEN
	1457	WRITE( message_string, * ) 'inflow profiles not ', &
	1458	'temporally averaged. &Averaging will be ', &
	1459	'done now using', average_count_pr, &
	1460	' samples.'
	1461	CALL message( 'rrd_read_parts_of_global', 'PA0309', 0, 1, 0, 6, 0 )
	1462	ENDIF
	1463
	1464	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file,0:statistic_regions_on_file) )
	1465	CALL rrd_mpi_io_global_array( 'hom', hom_on_file )
	1466	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
	1467	DEALLOCATE( hom_on_file )
	1468
	1469	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, 0:statistic_regions_on_file) )
	1470	CALL rrd_mpi_io_global_array( 'hom_sum', hom_sum_on_file )
	1471	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
	1472	DEALLOCATE( hom_sum_on_file )
	1473
	1474	momentum_advec_check = momentum_advec
	1475	CALL rrd_mpi_io( 'momentum_advec', momentum_advec )
	1476	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
	1477	WRITE( message_string, * ) 'momentum_advec of the restart ',&
	1478	'run differs from momentum_advec of the ', &
	1479	'initial run.'
	1480	CALL message( 'rrd_read_parts_of_global', 'PA0100', 1, 2, 0, 6, 0 )
	1481	ENDIF
	1482
[4617]	1483	CALL rrd_mpi_io( 'bc_lr', bc_lr_on_file )
	1484	CALL rrd_mpi_io( 'bc_ns', bc_ns_on_file )
	1485	IF ( TRIM( bc_lr_on_file ) /= 'cyclic' .OR. TRIM( bc_ns_on_file ) /= 'cyclic' ) THEN
	1486	message_string = 'bc_lr and/or bc_ns in the prerun was set /= "cyclic"'
	1487	CALL message( 'rrd_read_parts_of_global', 'PA0498', 1, 2, 0, 6, 0 )
	1488	ENDIF
[4580]	1489
	1490	scalar_advec_check = scalar_advec
	1491	CALL rrd_mpi_io( 'scalar_advec', scalar_advec )
	1492	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
	1493	WRITE( message_string, * ) 'scalar_advec of the restart ', &
	1494	'run differs from scalar_advec of the ', &
	1495	'initial run.'
	1496	CALL message( 'rrd_read_parts_of_global', 'PA0101', 1, 2, 0, 6, 0 )
	1497	ENDIF
	1498
[4617]	1499	CALL rrd_mpi_io( 'nx', nx_on_file )
	1500	CALL rrd_mpi_io( 'ny', ny_on_file )
	1501	CALL rrd_mpi_io_global_array( 'ref_state', ref_state )
	1502
[4580]	1503	!
	1504	!-- Close restart file
	1505	CALL rd_mpi_io_close
	1506
	1507	ENDIF
	1508
	1509	!
[2894]	1510	!-- Calculate the temporal average of vertical profiles, if neccessary
	1511	IF ( average_count_pr /= 0 ) THEN
	1512	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
	1513	ENDIF
	1514
[4580]	1515	END SUBROUTINE rrd_read_parts_of_global
[2894]	1516
	1517
	1518	! Description:
	1519	! ------------
[4517]	1520	!> Reads processor (subdomain) specific data of variables and arrays from restart file
[2894]	1521	!> (binary format).
	1522	!------------------------------------------------------------------------------!
[3637]	1523	SUBROUTINE rrd_local
[2894]	1524
	1525
	1526	CHARACTER (LEN=7) :: myid_char_save
	1527	CHARACTER (LEN=10) :: binary_version_local
	1528	CHARACTER (LEN=10) :: version_on_file
[4517]	1529	CHARACTER (LEN=20) :: tmp_name !< temporary variable
[2894]	1530
	1531	INTEGER(iwp) :: files_to_be_opened !<
	1532	INTEGER(iwp) :: i !<
	1533	INTEGER(iwp) :: j !<
	1534	INTEGER(iwp) :: k !<
	1535	INTEGER(iwp) :: myid_on_file !<
	1536	INTEGER(iwp) :: numprocs_on_file !<
	1537	INTEGER(iwp) :: nxlc !<
	1538	INTEGER(iwp) :: nxlf !<
	1539	INTEGER(iwp) :: nxlpr !<
	1540	INTEGER(iwp) :: nxl_on_file !<
	1541	INTEGER(iwp) :: nxrc !<
	1542	INTEGER(iwp) :: nxrf !<
	1543	INTEGER(iwp) :: nxrpr !<
	1544	INTEGER(iwp) :: nxr_on_file !<
	1545	INTEGER(iwp) :: nync !<
	1546	INTEGER(iwp) :: nynf !<
	1547	INTEGER(iwp) :: nynpr !<
	1548	INTEGER(iwp) :: nyn_on_file !<
	1549	INTEGER(iwp) :: nysc !<
	1550	INTEGER(iwp) :: nysf !<
	1551	INTEGER(iwp) :: nyspr !<
	1552	INTEGER(iwp) :: nys_on_file !<
	1553	INTEGER(iwp) :: nzb_on_file !<
	1554	INTEGER(iwp) :: nzt_on_file !<
	1555	INTEGER(iwp) :: offset_x !<
	1556	INTEGER(iwp) :: offset_y !<
	1557	INTEGER(iwp) :: shift_x !<
	1558	INTEGER(iwp) :: shift_y !<
	1559
	1560	INTEGER(iwp), DIMENSION(numprocs_previous_run) :: file_list !<
	1561	INTEGER(iwp), DIMENSION(numprocs_previous_run) :: overlap_count !<
	1562
[4356]	1563	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nxlfa !<
	1564	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nxrfa !<
	1565	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nynfa !<
	1566	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nysfa !<
	1567	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: offset_xa !<
	1568	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: offset_ya !<
[2894]	1569
	1570	INTEGER(isp), DIMENSION(:,:), ALLOCATABLE :: tmp_2d_id_random !< temporary array for storing random generator data
	1571	INTEGER(isp), DIMENSION(:,:,:), ALLOCATABLE :: tmp_2d_seq_random !< temporary array for storing random generator data
	1572
[4517]	1573	LOGICAL :: array_found !<
	1574	LOGICAL :: found !<
[2894]	1575
[3998]	1576	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: tmp_2d !< temporary array for storing 2D data
	1577	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tmp_3d !< temporary array for storing 3D data
[4009]	1578	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tmp_3d_non_standard !< temporary array for storing 3D data
	1579	!< with non standard dimensions
[2894]	1580
	1581	!
	1582	!-- Read data from previous model run.
[4539]	1583	CALL cpu_log( log_point_s(14), 'read-restart-data-local', 'start' )
[4517]	1584
[4539]	1585	CALL location_message( 'reading local restart data', 'start' )
	1586
[4517]	1587	IF ( TRIM( restart_data_format_input ) == 'fortran_binary' ) THEN
[4356]	1588	!
[4517]	1589	!-- Input in Fortran binary format
[2894]	1590
	1591	!
[4580]	1592	!-- Allocate temporary buffer arrays. In previous versions, they were
[4517]	1593	!-- declared as automated arrays, causing memory problems when these
	1594	!-- were allocate on stack.
	1595	ALLOCATE( nxlfa(numprocs_previous_run,1000) )
	1596	ALLOCATE( nxrfa(numprocs_previous_run,1000) )
	1597	ALLOCATE( nynfa(numprocs_previous_run,1000) )
	1598	ALLOCATE( nysfa(numprocs_previous_run,1000) )
	1599	ALLOCATE( offset_xa(numprocs_previous_run,1000) )
	1600	ALLOCATE( offset_ya(numprocs_previous_run,1000) )
[2894]	1601
	1602	!
[4517]	1603	!-- Check which of the restart files contain data needed for the subdomain
	1604	!-- of this PE
	1605	files_to_be_opened = 0
[2894]	1606
[4517]	1607	DO i = 1, numprocs_previous_run
[2894]	1608	!
[4517]	1609	!-- Store array bounds of the previous run ("pr") in temporary scalars
	1610	nxlpr = hor_index_bounds_previous_run(1,i-1)
	1611	nxrpr = hor_index_bounds_previous_run(2,i-1)
	1612	nyspr = hor_index_bounds_previous_run(3,i-1)
	1613	nynpr = hor_index_bounds_previous_run(4,i-1)
[2894]	1614
	1615	!
[4517]	1616	!-- Determine the offsets. They may be non-zero in case that the total domain
	1617	!-- on file is smaller than the current total domain.
	1618	offset_x = ( nxl / ( nx_on_file + 1 ) ) * ( nx_on_file + 1 )
	1619	offset_y = ( nys / ( ny_on_file + 1 ) ) * ( ny_on_file + 1 )
[4431]	1620
[4517]	1621	!
	1622	!-- Start with this offset and then check, if the subdomain on file
	1623	!-- matches another time(s) in the current subdomain by shifting it
	1624	!-- for nx_on_file+1, ny_on_file+1 respectively
[2894]	1625
[4517]	1626	shift_y = 0
	1627	j = 0
	1628	DO WHILE ( nyspr+shift_y <= nyn-offset_y )
[4431]	1629
[4517]	1630	IF ( nynpr+shift_y >= nys-offset_y ) THEN
[4431]	1631
[4517]	1632	shift_x = 0
	1633	DO WHILE ( nxlpr+shift_x <= nxr-offset_x )
	1634
	1635	IF ( nxrpr+shift_x >= nxl-offset_x ) THEN
	1636	j = j +1
	1637	IF ( j > 1000 ) THEN
[2894]	1638	!
[4517]	1639	!-- Array bound exceeded
	1640	message_string = 'data from subdomain of previous' // &
	1641	' run mapped more than 1000 times'
	1642	CALL message( 'rrd_local', 'PA0284', 2, 2, -1, 6, 1 )
	1643	ENDIF
[2894]	1644
[4517]	1645	IF ( j == 1 ) THEN
	1646	files_to_be_opened = files_to_be_opened + 1
	1647	file_list(files_to_be_opened) = i-1
	1648	ENDIF
[4431]	1649
[4517]	1650	offset_xa(files_to_be_opened,j) = offset_x + shift_x
	1651	offset_ya(files_to_be_opened,j) = offset_y + shift_y
[2894]	1652	!
[4517]	1653	!-- Index bounds of overlapping data
	1654	nxlfa(files_to_be_opened,j) = MAX( nxl-offset_x-shift_x, nxlpr )
	1655	nxrfa(files_to_be_opened,j) = MIN( nxr-offset_x-shift_x, nxrpr )
	1656	nysfa(files_to_be_opened,j) = MAX( nys-offset_y-shift_y, nyspr )
	1657	nynfa(files_to_be_opened,j) = MIN( nyn-offset_y-shift_y, nynpr )
[2894]	1658
[4517]	1659	ENDIF
[2894]	1660
[4517]	1661	shift_x = shift_x + ( nx_on_file + 1 )
	1662	ENDDO
[4431]	1663
[4517]	1664	ENDIF
[4431]	1665
[4517]	1666	shift_y = shift_y + ( ny_on_file + 1 )
	1667	ENDDO
[4431]	1668
[4517]	1669	IF ( j > 0 ) overlap_count(files_to_be_opened) = j
[4431]	1670
[4517]	1671	ENDDO
[4431]	1672
[2894]	1673	!
[4517]	1674	!-- Save the id-string of the current process, since myid_char may now be used
	1675	!-- to open files created by PEs with other id.
	1676	myid_char_save = myid_char
[2894]	1677
[4517]	1678	IF ( files_to_be_opened /= 1 .OR. numprocs /= numprocs_previous_run ) THEN
	1679	WRITE( message_string, * ) 'number of PEs or virtual PE-grid changed in restart run. & ', &
	1680	'Set debug_output =.T. to get a list of files from which the & ',&
	1681	'single PEs will read respectively'
	1682	CALL message( 'rrd_local', 'PA0285', 0, 0, 0, 6, 0 )
	1683	IF ( debug_output ) THEN
	1684	IF ( files_to_be_opened <= 120 ) THEN
	1685	WRITE( debug_string, '(2A,1X,120(I6.6,1X))' ) &
	1686	'number of PEs or virtual PE-grid changed in restart run. PE will read from ', &
	1687	'files ', file_list(1:files_to_be_opened)
	1688	ELSE
	1689	WRITE( debug_string, '(3A,1X,120(I6.6,1X),A)' ) &
	1690	'number of PEs or virtual PE-grid changed in restart run. PE will read from ', &
	1691	'files ', file_list(1:120), '... and more'
	1692	ENDIF
	1693	CALL debug_message( 'rrd_local', 'info' )
[4435]	1694	ENDIF
	1695	ENDIF
[2894]	1696
	1697	!
[4517]	1698	!-- Read data from all restart files determined above
	1699	DO i = 1, files_to_be_opened
[4431]	1700
[4517]	1701	j = file_list(i)
[2894]	1702	!
[4517]	1703	!-- Set the filename (underscore followed by four digit processor id)
	1704	WRITE (myid_char,'(''_'',I6.6)') j
[2894]	1705
	1706	!
[4517]	1707	!-- Open the restart file. If this file has been created by PE0 (_000000),
	1708	!-- the global variables at the beginning of the file have to be skipped
	1709	!-- first.
	1710	CALL check_open( 13 )
	1711	IF ( j == 0 ) CALL rrd_skip_global
[2894]	1712
	1713	!
[4517]	1714	!-- First compare the version numbers
	1715	READ ( 13 ) length
	1716	READ ( 13 ) restart_string(1:length)
	1717	READ ( 13 ) version_on_file
[2894]	1718
[4671]	1719	binary_version_local = '5.1'
[4517]	1720	IF ( TRIM( version_on_file ) /= TRIM( binary_version_local ) ) THEN
	1721	WRITE( message_string, * ) 'version mismatch concerning ', &
	1722	'binary_version_local:', &
	1723	'&version on file = "', TRIM( version_on_file ), '"', &
	1724	'&version in program = "', TRIM( binary_version_local ), '"'
	1725	CALL message( 'rrd_local', 'PA0286', 1, 2, 0, 6, 0 )
	1726	ENDIF
[2894]	1727
	1728	!
[4517]	1729	!-- Read number of processors, processor-id, and array ranges.
	1730	!-- Compare the array ranges with those stored in the index bound array.
	1731	READ ( 13 ) numprocs_on_file, myid_on_file, nxl_on_file, nxr_on_file, nys_on_file, &
	1732	nyn_on_file, nzb_on_file, nzt_on_file
[2894]	1733
[4517]	1734	IF ( nxl_on_file /= hor_index_bounds_previous_run(1,j) ) THEN
	1735	WRITE( message_string, * ) 'problem with index bound nxl on ', &
	1736	'restart file "', myid_char, '"', &
	1737	'&nxl = ', nxl_on_file, ' but it should be', &
	1738	'&= ', hor_index_bounds_previous_run(1,j), &
	1739	'&from the index bound information array'
	1740	CALL message( 'rrd_local', 'PA0287', 2, 2, -1, 6, 1 )
	1741	ENDIF
[2894]	1742
[4517]	1743	IF ( nxr_on_file /= hor_index_bounds_previous_run(2,j) ) THEN
	1744	WRITE( message_string, * ) 'problem with index bound nxr on ', &
	1745	'restart file "', myid_char, '"' , &
	1746	' nxr = ', nxr_on_file, ' but it should be', &
	1747	' = ', hor_index_bounds_previous_run(2,j), &
	1748	' from the index bound information array'
	1749	CALL message( 'rrd_local', 'PA0288', 2, 2, -1, 6, 1 )
[2894]	1750
[4517]	1751	ENDIF
[2894]	1752
[4517]	1753	IF ( nys_on_file /= hor_index_bounds_previous_run(3,j) ) THEN
	1754	WRITE( message_string, * ) 'problem with index bound nys on ', &
	1755	'restart file "', myid_char, '"', &
	1756	'&nys = ', nys_on_file, ' but it should be', &
	1757	'&= ', hor_index_bounds_previous_run(3,j), &
	1758	'&from the index bound information array'
	1759	CALL message( 'rrd_local', 'PA0289', 2, 2, -1, 6, 1 )
	1760	ENDIF
[2894]	1761
[4517]	1762	IF ( nyn_on_file /= hor_index_bounds_previous_run(4,j) ) THEN
	1763	WRITE( message_string, * ) 'problem with index bound nyn on ', &
	1764	'restart file "', myid_char, '"', &
	1765	'&nyn = ', nyn_on_file, ' but it should be', &
	1766	'&= ', hor_index_bounds_previous_run(4,j), &
	1767	'&from the index bound information array'
	1768	CALL message( 'rrd_local', 'PA0290', 2, 2, -1, 6, 1 )
	1769	ENDIF
[2894]	1770
[4517]	1771	IF ( nzb_on_file /= nzb ) THEN
	1772	WRITE( message_string, * ) 'mismatch between actual data and data ', &
	1773	'from prior run on PE ', myid, &
	1774	'&nzb on file = ', nzb_on_file, &
	1775	'&nzb = ', nzb
	1776	CALL message( 'rrd_local', 'PA0291', 1, 2, 0, 6, 0 )
	1777	ENDIF
[2894]	1778
[4517]	1779	IF ( nzt_on_file /= nzt ) THEN
	1780	WRITE( message_string, * ) 'mismatch between actual data and data ', &
	1781	'from prior run on PE ', myid, &
	1782	'&nzt on file = ', nzt_on_file, &
	1783	'&nzt = ', nzt
	1784	CALL message( 'rrd_local', 'PA0292', 1, 2, 0, 6, 0 )
	1785	ENDIF
[2894]	1786
	1787	!
[4517]	1788	!-- Allocate temporary arrays sized as the arrays on the restart file
	1789	ALLOCATE( tmp_2d(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
	1790	tmp_3d(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp, &
	1791	nxl_on_file-nbgp:nxr_on_file+nbgp) )
[2894]	1792
	1793	!
[4517]	1794	!-- Read arrays
	1795	!-- ATTENTION: If the following read commands have been altered, the
	1796	!-- ---------- version number of the variable binary_version_local must
	1797	!-- be altered, too. Furthermore, the output list of arrays in
	1798	!-- wrd_write_local must also be altered
	1799	!-- accordingly.
	1800	READ ( 13 ) length
	1801	READ ( 13 ) restart_string(1:length)
[2894]	1802
[4431]	1803
[2894]	1804	!
[4517]	1805	!-- Loop over processor specific field data
	1806	DO WHILE ( restart_string(1:length) /= '* end *' )
[2894]	1807
	1808	!
[4517]	1809	!-- Map data on file as often as needed (data are read only for k=1)
	1810	DO k = 1, overlap_count(i)
[2894]	1811
[4517]	1812	found = .FALSE.
[4431]	1813
[2894]	1814	!
[4517]	1815	!-- Get the index range of the subdomain on file which overlap with
	1816	!-- the current subdomain
	1817	nxlf = nxlfa(i,k)
	1818	nxlc = nxlfa(i,k) + offset_xa(i,k)
	1819	nxrf = nxrfa(i,k)
	1820	nxrc = nxrfa(i,k) + offset_xa(i,k)
	1821	nysf = nysfa(i,k)
	1822	nysc = nysfa(i,k) + offset_ya(i,k)
	1823	nynf = nynfa(i,k)
	1824	nync = nynfa(i,k) + offset_ya(i,k)
[2894]	1825
	1826
[4517]	1827	SELECT CASE ( restart_string(1:length) )
[2894]	1828
[4517]	1829	CASE ( 'ghf_av' )
	1830	IF ( .NOT. ALLOCATED( ghf_av ) ) THEN
	1831	ALLOCATE( ghf_av(nysg:nyng,nxlg:nxrg) )
	1832	ENDIF
	1833	IF ( k == 1 ) READ ( 13 ) tmp_2d
	1834	ghf_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1835	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1836
[4517]	1837	CASE ( 'e' )
	1838	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1839	e(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1840	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1841
[4517]	1842	CASE ( 'e_av' )
	1843	IF ( .NOT. ALLOCATED( e_av ) ) THEN
	1844	ALLOCATE( e_av(nzb:nzt+1,nys-nbgp:nyn+nbgp, &
	1845	nxl-nbgp:nxr+nbgp) )
	1846	ENDIF
	1847	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1848	e_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1849	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1850
[4517]	1851	CASE ( 'kh' )
	1852	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1853	kh(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1854	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1855
[4517]	1856	CASE ( 'kh_av' )
	1857	IF ( .NOT. ALLOCATED( kh_av ) ) THEN
	1858	ALLOCATE( kh_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg ))
	1859	ENDIF
	1860	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1861	kh_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1862	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1863
[4517]	1864	CASE ( 'km' )
	1865	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1866	km(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1867	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1868
[4517]	1869	CASE ( 'km_av' )
	1870	IF ( .NOT. ALLOCATED( km_av ) ) THEN
	1871	ALLOCATE( km_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg ))
	1872	ENDIF
	1873	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1874	km_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1875	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1876
[4517]	1877	CASE ( 'lpt_av' )
	1878	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
	1879	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg ))
	1880	ENDIF
	1881	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1882	lpt_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1883	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1884
[4517]	1885	CASE ( 'lwp_av' )
	1886	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
	1887	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
	1888	ENDIF
	1889	IF ( k == 1 ) READ ( 13 ) tmp_2d
	1890	lwp_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1891	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1892
[4517]	1893	CASE ( 'p' )
	1894	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1895	p(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1896	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1897
[4517]	1898	CASE ( 'p_av' )
	1899	IF ( .NOT. ALLOCATED( p_av ) ) THEN
	1900	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1901	ENDIF
	1902	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1903	p_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1904	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1905
[4517]	1906	CASE ( 'pt' )
	1907	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1908	pt(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1909	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1910
[4517]	1911	CASE ( 'pt_av' )
	1912	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
	1913	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1914	ENDIF
	1915	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1916	pt_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1917	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1918
[4517]	1919	CASE ( 'q' )
	1920	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1921	q(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1922	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1923
[4517]	1924	CASE ( 'q_av' )
	1925	IF ( .NOT. ALLOCATED( q_av ) ) THEN
	1926	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg ))
	1927	ENDIF
	1928	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1929	q_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1930	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1931
[4517]	1932	CASE ( 'ql' )
	1933	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1934	ql(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1935	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1936
[4517]	1937	CASE ( 'ql_av' )
	1938	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
	1939	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1940	ENDIF
	1941	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1942	ql_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1943	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1944
[4517]	1945	CASE ( 'qsurf_av' )
	1946	IF ( .NOT. ALLOCATED( qsurf_av ) ) THEN
	1947	ALLOCATE( qsurf_av(nysg:nyng,nxlg:nxrg) )
	1948	ENDIF
	1949	IF ( k == 1 ) READ ( 13 ) tmp_2d
	1950	qsurf_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1951	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[4514]	1952
[4517]	1953	CASE ( 'qsws_av' )
	1954	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
	1955	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
	1956	ENDIF
	1957	IF ( k == 1 ) READ ( 13 ) tmp_2d
	1958	qsws_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1959	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1960
[4517]	1961	CASE ( 'qv_av' )
	1962	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
	1963	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1964	ENDIF
	1965	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1966	qv_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1967	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1968
[4517]	1969	CASE ( 'r_a_av' )
	1970	IF ( .NOT. ALLOCATED( r_a_av ) ) THEN
	1971	ALLOCATE( r_a_av(nysg:nyng,nxlg:nxrg) )
	1972	ENDIF
	1973	IF ( k == 1 ) READ ( 13 ) tmp_2d
	1974	r_a_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1975	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	1976
[4517]	1977	CASE ( 'random_iv' ) ! still unresolved issue
	1978	IF ( k == 1 ) READ ( 13 ) random_iv
	1979	IF ( k == 1 ) READ ( 13 ) random_iy
[2894]	1980
[4517]	1981	CASE ( 'seq_random_array' )
	1982	ALLOCATE( tmp_2d_id_random(nys_on_file:nyn_on_file,nxl_on_file:nxr_on_file) )
	1983	ALLOCATE( tmp_2d_seq_random(5,nys_on_file:nyn_on_file,nxl_on_file:nxr_on_file) )
	1984	IF ( .NOT. ALLOCATED( id_random_array ) ) THEN
	1985	ALLOCATE( id_random_array(nys:nyn,nxl:nxr) )
	1986	ENDIF
	1987	IF ( .NOT. ALLOCATED( seq_random_array ) ) THEN
	1988	ALLOCATE( seq_random_array(5,nys:nyn,nxl:nxr) )
	1989	ENDIF
	1990	IF ( k == 1 ) READ ( 13 ) tmp_2d_id_random
	1991	IF ( k == 1 ) READ ( 13 ) tmp_2d_seq_random
	1992	id_random_array(nysc:nync,nxlc:nxrc) = tmp_2d_id_random(nysf:nynf,nxlf:nxrf)
	1993	seq_random_array(:,nysc:nync,nxlc:nxrc) = tmp_2d_seq_random(:,nysf:nynf,nxlf:nxrf)
	1994	DEALLOCATE( tmp_2d_id_random, tmp_2d_seq_random )
[2894]	1995
[4517]	1996	CASE ( 's' )
	1997	IF ( k == 1 ) READ ( 13 ) tmp_3d
	1998	s(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	1999	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2000
[4517]	2001	CASE ( 's_av' )
	2002	IF ( .NOT. ALLOCATED( s_av ) ) THEN
	2003	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg))
	2004	ENDIF
	2005	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2006	s_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2007	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2008
[4517]	2009	CASE ( 'shf_av' )
	2010	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
	2011	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
	2012	ENDIF
	2013	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2014	shf_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2015	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[4431]	2016
[4517]	2017	CASE ( 'ssurf_av' )
	2018	IF ( .NOT. ALLOCATED( ssurf_av ) ) THEN
	2019	ALLOCATE( ssurf_av(nysg:nyng,nxlg:nxrg) )
	2020	ENDIF
	2021	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2022	ssurf_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2023	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[4514]	2024
[4517]	2025	CASE ( 'ssws_av' )
	2026	IF ( .NOT. ALLOCATED( ssws_av ) ) THEN
	2027	ALLOCATE( ssws_av(nysg:nyng,nxlg:nxrg) )
	2028	ENDIF
	2029	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2030	ssws_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2031	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[3994]	2032
[4517]	2033	CASE ( 'ts_av' )
	2034	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
	2035	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
	2036	ENDIF
	2037	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2038	ts_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2039	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2040
[4517]	2041	CASE ( 'tsurf_av' )
	2042	IF ( .NOT. ALLOCATED( tsurf_av ) ) THEN
	2043	ALLOCATE( tsurf_av(nysg:nyng,nxlg:nxrg) )
	2044	ENDIF
	2045	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2046	tsurf_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2047	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2048
[4517]	2049	CASE ( 'u' )
	2050	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2051	u(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2052	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2053
[4517]	2054	CASE ( 'u_av' )
	2055	IF ( .NOT. ALLOCATED( u_av ) ) THEN
	2056	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2057	ENDIF
	2058	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2059	u_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2060	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[4431]	2061
[4517]	2062	CASE ( 'us_av' )
	2063	IF ( .NOT. ALLOCATED( us_av ) ) THEN
	2064	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
	2065	ENDIF
	2066	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2067	us_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2068	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2069
[4517]	2070	CASE ( 'v' )
	2071	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2072	v(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2073	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2074
[4517]	2075	CASE ( 'v_av' )
	2076	IF ( .NOT. ALLOCATED( v_av ) ) THEN
	2077	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2078	ENDIF
	2079	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2080	v_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2081	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[4431]	2082
[4517]	2083	CASE ( 'vpt' )
	2084	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2085	vpt(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2086	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2087
[4517]	2088	CASE ( 'vpt_av' )
	2089	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
	2090	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2091	ENDIF
	2092	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2093	vpt_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2094	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2095
[4517]	2096	CASE ( 'w' )
	2097	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2098	w(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2099	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2100
[4517]	2101	CASE ( 'w_av' )
	2102	IF ( .NOT. ALLOCATED( w_av ) ) THEN
	2103	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2104	ENDIF
	2105	IF ( k == 1 ) READ ( 13 ) tmp_3d
	2106	w_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2107	tmp_3d(:,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[4431]	2108
[4517]	2109	CASE ( 'z0_av' )
	2110	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
	2111	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
	2112	ENDIF
	2113	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2114	z0_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2115	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2116
[4517]	2117	CASE ( 'z0h_av' )
	2118	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
	2119	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
	2120	ENDIF
	2121	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2122	z0h_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2123	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2124
[4517]	2125	CASE ( 'z0q_av' )
	2126	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
	2127	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
	2128	ENDIF
	2129	IF ( k == 1 ) READ ( 13 ) tmp_2d
	2130	z0q_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
	2131	tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
[2894]	2132
[4517]	2133	CASE DEFAULT
[2894]	2134
	2135	!
[4517]	2136	!-- Read restart data of surfaces
	2137	IF ( .NOT. found ) CALL surface_rrd_local( k, nxlf, nxlc, nxl_on_file, nxrf, &
	2138	nxr_on_file, nynf, nyn_on_file, &
	2139	nysf, nysc, nys_on_file, found )
[2912]	2140	!
[4517]	2141	!-- Read restart data of other modules
	2142	IF ( .NOT. found ) CALL module_interface_rrd_local( &
	2143	k, nxlf, nxlc, nxl_on_file, nxrf, &
	2144	nxrc, nxr_on_file, nynf, nync, &
	2145	nyn_on_file, nysf, nysc, &
	2146	nys_on_file, tmp_2d, tmp_3d, found )
[2894]	2147
	2148
[4517]	2149	IF ( .NOT. found ) THEN
	2150	WRITE( message_string, * ) 'unknown variable named "', &
	2151	restart_string(1:length), &
	2152	'" found in subdomain data ', &
	2153	'from prior run on PE ', myid
	2154	CALL message( 'rrd_local', 'PA0302', 1, 2, 0, 6, 0 )
[4431]	2155
[4517]	2156	ENDIF
[2894]	2157
[4517]	2158	END SELECT
[2894]	2159
[4517]	2160	ENDDO ! overlaploop
[2894]	2161
	2162	!
[4517]	2163	!-- Deallocate non standard array needed for specific variables only
	2164	IF ( ALLOCATED( tmp_3d_non_standard ) ) DEALLOCATE( tmp_3d_non_standard )
[2894]	2165
	2166	!
[4517]	2167	!-- Read next character string
	2168	READ ( 13 ) length
	2169	READ ( 13 ) restart_string(1:length)
[2894]	2170
[4517]	2171	ENDDO ! dataloop
[2894]	2172	!
[4517]	2173	!-- Close the restart file
	2174	CALL close_file( 13 )
[2894]	2175
[4517]	2176	DEALLOCATE( tmp_2d, tmp_3d )
[2894]	2177
[4517]	2178	ENDDO ! loop over restart files
[2894]	2179	!
[4517]	2180	!-- Deallocate temporary buffer arrays
	2181	DEALLOCATE( nxlfa )
	2182	DEALLOCATE( nxrfa )
	2183	DEALLOCATE( nynfa )
	2184	DEALLOCATE( nysfa )
	2185	DEALLOCATE( offset_xa )
	2186	DEALLOCATE( offset_ya )
[4356]	2187	!
[4517]	2188	!-- Restore the original filename for the restart file to be written
	2189	myid_char = myid_char_save
[2894]	2190
[4517]	2191
[4534]	2192	ELSEIF ( restart_data_format_input(1:3) == 'mpi' ) THEN
[4517]	2193
[2894]	2194	!
[4617]	2195	!-- Read local restart data using MPI-IO
[4517]	2196	!
	2197	!-- Open the MPI-IO restart file.
	2198	CALL rd_mpi_io_open( 'read', 'BININ' // TRIM( coupling_char ) )
	2199
	2200
	2201	CALL rd_mpi_io_check_array( 'ghf_av' , found = array_found )
	2202	IF ( array_found ) THEN
	2203	IF (.NOT. ALLOCATED( ghf_av ) ) ALLOCATE( ghf_av(nysg:nyng,nxlg:nxrg) )
	2204	CALL rrd_mpi_io( 'ghf_av', ghf_av )
	2205	ENDIF
	2206
	2207	CALL rrd_mpi_io( 'e', e )
	2208
	2209	CALL rd_mpi_io_check_array( 'e_av' , found = array_found )
	2210	IF ( array_found ) THEN
	2211	IF ( .NOT. ALLOCATED( e_av ) ) ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2212	CALL rrd_mpi_io( 'e_av', e_av )
	2213	ENDIF
	2214
	2215	CALL rrd_mpi_io( 'kh', kh )
	2216
	2217	CALL rd_mpi_io_check_array( 'kh_av' , found = array_found )
	2218	IF ( array_found ) THEN
	2219	IF ( .NOT. ALLOCATED( kh_av ) ) ALLOCATE( kh_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2220	CALL rrd_mpi_io( 'kh_av', kh_av )
	2221	ENDIF
	2222
	2223	CALL rrd_mpi_io( 'km' , km)
	2224
	2225	CALL rd_mpi_io_check_array( 'km_av' , found = array_found )
	2226	IF ( array_found ) THEN
	2227	IF ( .NOT. ALLOCATED( km_av ) ) ALLOCATE( km_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2228	CALL rrd_mpi_io( 'km_av', km_av )
	2229	ENDIF
	2230
	2231	CALL rd_mpi_io_check_array( 'lpt_av' , found = array_found )
	2232	IF ( array_found ) THEN
	2233	IF ( .NOT. ALLOCATED( lpt_av ) ) ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2234	CALL rrd_mpi_io( 'lpt_av', lpt_av )
	2235	ENDIF
	2236
	2237	CALL rd_mpi_io_check_array( 'lwp_av' , found = array_found )
	2238	IF ( array_found ) THEN
	2239	IF ( .NOT. ALLOCATED( lwp_av ) ) ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
	2240	CALL rrd_mpi_io( 'lwp_av', lwp_av )
	2241	ENDIF
	2242
	2243	CALL rrd_mpi_io( 'p', p)
	2244
	2245	CALL rd_mpi_io_check_array( 'p_av' , found = array_found )
	2246	IF ( array_found ) THEN
	2247	IF ( .NOT. ALLOCATED( p_av ) ) ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2248	CALL rrd_mpi_io( 'p_av', p_av )
	2249	ENDIF
	2250
	2251	CALL rrd_mpi_io( 'pt', pt)
	2252
	2253	CALL rd_mpi_io_check_array( 'pt_av' , found = array_found )
	2254	IF ( array_found ) THEN
	2255	IF ( .NOT. ALLOCATED( pt_av ) ) ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2256	CALL rrd_mpi_io( 'pt_av', pt_av )
	2257	ENDIF
	2258
	2259	CALL rd_mpi_io_check_array( 'q' , found = array_found )
	2260	IF ( array_found ) THEN
	2261	CALL rrd_mpi_io( 'q', q )
	2262	ENDIF
	2263
	2264	CALL rd_mpi_io_check_array( 'q_av' , found = array_found )
	2265	IF ( array_found ) THEN
	2266	IF ( .NOT. ALLOCATED( q_av ) ) ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2267	CALL rrd_mpi_io( 'q_av', q_av )
	2268	ENDIF
	2269
	2270	CALL rd_mpi_io_check_array( 'ql' , found = array_found )
	2271	IF ( array_found ) THEN
	2272	CALL rrd_mpi_io( 'ql', ql )
	2273	ENDIF
	2274
	2275	CALL rd_mpi_io_check_array( 'ql_av' , found = array_found )
	2276	IF ( array_found ) THEN
	2277	IF ( .NOT. ALLOCATED( ql_av ) ) ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2278	CALL rrd_mpi_io( 'ql_av', ql_av )
	2279	ENDIF
	2280
	2281	CALL rd_mpi_io_check_array( 'qsurf_av' , found = array_found )
	2282	IF ( array_found ) THEN
	2283	IF ( .NOT. ALLOCATED( qsurf_av ) ) ALLOCATE( qsurf_av(nysg:nyng,nxlg:nxrg) )
	2284	CALL rrd_mpi_io( 'qsurf_av', qsurf_av )
	2285	ENDIF
	2286
	2287	CALL rd_mpi_io_check_array( 'qsws_av' , found = array_found )
	2288	IF ( array_found ) THEN
	2289	IF ( .NOT. ALLOCATED( qsws_av ) ) ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
	2290	CALL rrd_mpi_io( 'qsws_av', qsws_av )
	2291	ENDIF
	2292
	2293	CALL rd_mpi_io_check_array( 'qv_av' , found = array_found )
	2294	IF ( array_found ) THEN
	2295	IF ( .NOT. ALLOCATED( qv_av ) ) ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2296	CALL rrd_mpi_io( 'qv_av', qv_av )
	2297	ENDIF
	2298
	2299	CALL rd_mpi_io_check_array( 'r_a_av' , found = array_found )
	2300	IF ( array_found ) THEN
	2301	IF ( .NOT. ALLOCATED( r_a_av ) ) ALLOCATE( r_a_av(nysg:nyng,nxlg:nxrg) )
	2302	CALL rrd_mpi_io( 'r_a_av', r_a_av )
	2303	ENDIF
	2304
	2305	!
	2306	!-- ATTENTION: The random seeds are global data! If independent values for every PE are required,
	2307	!-- the general approach of PE indendent restart will be lost. That means that in general the
	2308	!-- parallel random number generator in random_generator_parallel_mod should be used!
	2309	CALL rrd_mpi_io_global_array( 'random_iv', random_iv )
	2310	CALL rrd_mpi_io( 'random_iy', random_iy )
	2311
	2312	CALL rd_mpi_io_check_array( 'id_random_array' , found = array_found )
	2313	IF ( array_found ) THEN
	2314	IF ( .NOT. ALLOCATED( id_random_array ) ) ALLOCATE( id_random_array(nys:nyn,nxl:nxr) )
	2315	IF ( .NOT. ALLOCATED( seq_random_array ) ) ALLOCATE( seq_random_array(5,nys:nyn,nxl:nxr) )
	2316	CALL rrd_mpi_io( 'id_random_array', id_random_array)
	2317	DO i = 1, SIZE( seq_random_array, 1 )
	2318	WRITE( tmp_name, '(A,I2.2)' ) 'seq_random_array', i
	2319	CALL rrd_mpi_io( TRIM(tmp_name), seq_random_array(i,:,:) )
	2320	ENDDO
	2321	ENDIF
	2322
	2323	CALL rd_mpi_io_check_array( 's' , found = array_found )
	2324	IF ( array_found ) THEN
	2325	CALL rrd_mpi_io( 's', s )
	2326	ENDIF
	2327
	2328	CALL rd_mpi_io_check_array( 's_av' , found = array_found )
	2329	IF ( array_found ) THEN
	2330	IF ( .NOT. ALLOCATED( s_av ) ) ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2331	CALL rrd_mpi_io( 's_av', s_av )
	2332	ENDIF
	2333
	2334	CALL rd_mpi_io_check_array( 'shf_av' , found = array_found )
	2335	IF ( array_found ) THEN
	2336	IF ( .NOT. ALLOCATED( shf_av ) ) ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
	2337	CALL rrd_mpi_io( 'shf_av', shf_av )
	2338	ENDIF
	2339
	2340	CALL rd_mpi_io_check_array( 'ssurf_av' , found = array_found )
	2341	IF ( array_found ) THEN
	2342	IF ( .NOT. ALLOCATED( ssurf_av ) ) ALLOCATE( ssurf_av(nysg:nyng,nxlg:nxrg) )
	2343	CALL rrd_mpi_io( 'ssurf_av', ssurf_av )
	2344	ENDIF
	2345
	2346	CALL rd_mpi_io_check_array( 'ssws_av' , found = array_found )
	2347	IF ( array_found ) THEN
	2348	IF ( .NOT. ALLOCATED( ssws_av ) ) ALLOCATE( ssws_av(nysg:nyng,nxlg:nxrg) )
	2349	CALL rrd_mpi_io( 'ssws_av', ssws_av )
	2350	ENDIF
	2351
	2352	CALL rd_mpi_io_check_array( 'ts_av' , found = array_found )
	2353	IF ( array_found ) THEN
	2354	IF ( .NOT. ALLOCATED( ts_av ) ) ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
	2355	CALL rrd_mpi_io( 'ts_av', ts_av )
	2356	ENDIF
	2357
	2358	CALL rd_mpi_io_check_array( 'tsurf_av' , found = array_found )
	2359	IF ( array_found ) THEN
	2360	IF ( .NOT. ALLOCATED( tsurf_av ) ) ALLOCATE( tsurf_av(nysg:nyng,nxlg:nxrg) )
	2361	CALL rrd_mpi_io( 'tsurf_av', tsurf_av )
	2362	ENDIF
	2363
	2364	CALL rrd_mpi_io( 'u', u)
	2365
	2366	CALL rd_mpi_io_check_array( 'u_av' , found = array_found )
	2367	IF ( array_found ) THEN
	2368	IF ( .NOT. ALLOCATED( u_av ) ) ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2369	CALL rrd_mpi_io( 'u_av', u_av )
	2370	ENDIF
	2371
	2372	CALL rd_mpi_io_check_array( 'us_av' , found = array_found )
	2373	IF ( array_found ) THEN
	2374	IF ( .NOT. ALLOCATED( us_av ) ) ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
	2375	CALL rrd_mpi_io( 'us_av', us_av )
	2376	ENDIF
	2377
	2378	CALL rrd_mpi_io( 'v', v )
	2379
	2380	CALL rd_mpi_io_check_array( 'v_av' , found = array_found )
	2381	IF ( array_found ) THEN
	2382	IF ( .NOT. ALLOCATED( v_av ) ) ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2383	CALL rrd_mpi_io( 'v_av', v_av )
	2384	ENDIF
	2385
	2386	CALL rd_mpi_io_check_array( 'vpt' , found = array_found )
	2387	IF ( array_found ) THEN
	2388	CALL rrd_mpi_io( 'vpt', vpt)
	2389	ENDIF
	2390
	2391	CALL rd_mpi_io_check_array( 'vpt_av' , found = array_found )
	2392	IF ( array_found ) THEN
	2393	IF ( .NOT. ALLOCATED( vpt_av ) ) ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2394	CALL rrd_mpi_io( 'vpt_av', vpt_av )
	2395	ENDIF
	2396
	2397	CALL rrd_mpi_io( 'w', w)
	2398
	2399	CALL rd_mpi_io_check_array( 'w_av' , found = array_found )
	2400	IF ( array_found ) THEN
	2401	IF ( .NOT. ALLOCATED( w_av ) ) ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2402	CALL rrd_mpi_io( 'w_av', w_av )
	2403	ENDIF
	2404
	2405	CALL rd_mpi_io_check_array( 'z0_av' , found = array_found )
	2406	IF ( array_found ) THEN
	2407	IF ( .NOT. ALLOCATED( z0_av ) ) ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
	2408	CALL rrd_mpi_io( 'z0_av', z0_av )
	2409	ENDIF
	2410
	2411	CALL rd_mpi_io_check_array( 'z0h_av' , found = array_found )
	2412	IF ( array_found ) THEN
	2413	IF ( .NOT. ALLOCATED( z0h_av ) ) ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
	2414	CALL rrd_mpi_io( 'z0h_av', z0h_av )
	2415	ENDIF
	2416
	2417	CALL rd_mpi_io_check_array( 'z0q_av' , found = array_found )
	2418	IF ( array_found ) THEN
	2419	IF ( .NOT. ALLOCATED( z0q_av ) ) ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
	2420	CALL rrd_mpi_io( 'z0q_av', z0q_av )
	2421	ENDIF
	2422
	2423	!
	2424	!-- Read restart data of surfaces
	2425	CALL surface_rrd_local
	2426
	2427	!
	2428	!-- Read restart data of other modules
	2429	CALL module_interface_rrd_local
	2430
	2431	!
	2432	!-- Close restart file
	2433	CALL rd_mpi_io_close
	2434
	2435	ENDIF
	2436
[4539]	2437	CALL location_message( 'reading local restart data', 'finished' )
[4517]	2438	!
[2894]	2439	!-- End of time measuring for reading binary data
[4539]	2440	CALL cpu_log( log_point_s(14), 'read-restart-data-local', 'stop' )
[2894]	2441
	2442	END SUBROUTINE rrd_local
	2443
	2444
	2445	!------------------------------------------------------------------------------!
	2446	! Description:
	2447	! ------------
	2448	!> Skipping the global control variables from restart-file (binary format)
	2449	!------------------------------------------------------------------------------!
[4495]	2450	SUBROUTINE rrd_skip_global
[2894]	2451
	2452
[4495]	2453	CHARACTER (LEN=1) :: cdum
[2894]	2454
	2455
[4495]	2456	READ ( 13 ) length
	2457	READ ( 13 ) restart_string(1:length)
[2894]	2458
[4495]	2459	DO WHILE ( restart_string(1:length) /= 'binary_version_local' )
	2460
	2461	READ ( 13 ) cdum
[2894]	2462	READ ( 13 ) length
	2463	READ ( 13 ) restart_string(1:length)
	2464
[4495]	2465	ENDDO
[2894]	2466
[4495]	2467	BACKSPACE ( 13 )
	2468	BACKSPACE ( 13 )
[2894]	2469
	2470
[4495]	2471	END SUBROUTINE rrd_skip_global
[2894]	2472
	2473
	2474	END MODULE read_restart_data_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |