source: palm/trunk/SOURCE/parin.f90 @ 553

Last change on this file since 553 was 553, checked in by weinreis, 11 years ago

several parameters for masked output are replaced by arrays

  • Property svn:keywords set to Id
File size: 12.8 KB
Line 
1 SUBROUTINE parin
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! -----------------
6! parameters for masked output are replaced by arrays
7!
8! Former revisions:
9! -----------------
10! $Id: parin.f90 553 2010-09-01 14:09:06Z weinreis $
11!
12! 493 2010-03-01 08:30:24Z raasch
13! +netcdf_data_format in d3par, -netcdf_64bit, -netcdf_64bit_3d
14!
15! 449 2010-02-02 11:23:59Z raasch
16! +wall_humidityflux, wall_scalarflux
17! +ws_vertical_gradient, ws_vertical_gradient_level
18!
19! 410 2009-12-04 17:05:40Z letzel
20! masked data output: + dt_domask, mask_01~20_x|y|z, mask_01~20_x|y|z_loop,
21! mask_scale_x|y|z, masks, skip_time_domask
22!
23! 291 2009-04-16 12:07:26Z raasch
24! +local_dvrserver_running in envpar
25! Output of messages replaced by message handling routine.
26! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
27! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
28! dp_external, dp_level_b, dp_smooth, dpdxy, u_bulk, v_bulk in inipar
29! topography_grid_convention moved from userpar
30!
31! 197 2008-09-16 15:29:03Z raasch
32! +cthf,leaf_surface_concentration, scalar_exchange_coefficient
33! +inflow_damping_height, inflow_damping_width, recycling_width,
34! turbulent_inflow in inipar, -skip_time_dosp in d3par,
35! allocation of hom_sum moved from init_3d_model to here,
36! npex, npey moved from inipar to d3par, setting of myid_char_14 removed,
37! lad is allways allocated
38!
39! 138 2007-11-28 10:03:58Z letzel
40! +canopy_mode, drag_coefficient, lad_surface, lad_vertical_gradient,
41! lad_vertical_gradient_level, pch_index, plant_canopy,
42! +allocation of leaf area density field
43!
44! 108 2007-08-24 15:10:38Z letzel
45! +e_init, top_momentumflux_u|v in inipar, +dt_coupling in d3par
46!
47! 95 2007-06-02 16:48:38Z raasch
48! +bc_sa_t, bottom_salinityflux, ocean, sa_surface, sa_vertical_gradient,
49! sa_vertical_gradient_level, top_salinityflux in inipar,
50! sa_init is allocated
51!
52! 87 2007-05-22 15:46:47Z raasch
53! Size of hom increased by the maximum number of user-defined profiles,
54! var_hom renamed pr_palm
55!
56! 82 2007-04-16 15:40:52Z raasch
57! +return_addres, return_username in envpar
58!
59! 75 2007-03-22 09:54:05Z raasch
60! +dt_max, netcdf_64bit_3d, precipitation_amount_interval in d3par,
61! +loop_optimization, pt_reference in inipar, -data_output_ts,
62! moisture renamed humidity
63!
64! 20 2007-02-26 00:12:32Z raasch
65! +top_heatflux, use_top_fluxes in inipar
66!
67! 3 2007-02-13 11:30:58Z raasch
68! +netcdf_64bit_3d in d3par,
69! RCS Log replace by Id keyword, revision history cleaned up
70!
71! Revision 1.57  2007/02/11 13:11:22  raasch
72! Values of environment variables are now read from file ENVPAR instead of
73! reading them with a system call, + NAMELIST envpar
74!
75! Revision 1.1  1997/07/24 11:22:50  raasch
76! Initial revision
77!
78!
79! Description:
80! ------------
81! This subroutine reads variables controling the run from the NAMELIST files
82!------------------------------------------------------------------------------!
83
84    USE arrays_3d
85    USE averaging
86    USE control_parameters
87    USE dvrp_variables
88    USE grid_variables
89    USE indices
90    USE model_1d
91    USE pegrid
92    USE profil_parameter
93    USE statistics
94
95    IMPLICIT NONE
96
97    INTEGER ::  idum
98
99
100    NAMELIST /inipar/  adjust_mixing_length, alpha_surface, bc_e_b, bc_lr, &
101                       bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b, &
102             bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t, &
103             bottom_salinityflux, building_height, building_length_x, &
104             building_length_y, building_wall_left, building_wall_south, &
105             canopy_mode, canyon_height, canyon_width_x, canyon_width_y, &
106             canyon_wall_left, canyon_wall_south, cloud_droplets, &
107             cloud_physics, conserve_volume_flow, conserve_volume_flow_mode, &
108             coupling_start_time, cthf, cut_spline_overshoot, &
109             damp_level_1d, dissipation_1d, dp_external, dp_level_b, &
110             dp_smooth, dpdxy, drag_coefficient, dt, dt_pr_1d, &
111             dt_run_control_1d, dx, dy, dz, dz_max, dz_stretch_factor, & 
112             dz_stretch_level, e_init, e_min, end_time_1d, fft_method, &
113             galilei_transformation, grid_matching, humidity, &
114             inflow_damping_height, inflow_damping_width, &
115             inflow_disturbance_begin, inflow_disturbance_end, &
116             initializing_actions, km_constant, km_damp_max, lad_surface, &
117             lad_vertical_gradient, lad_vertical_gradient_level, &
118             leaf_surface_concentration, long_filter_factor, &
119             loop_optimization, mixing_length_1d, momentum_advec, &
120             netcdf_precision, nsor_ini, nx, ny, &
121             nz, ocean, omega, outflow_damping_width, overshoot_limit_e, &
122             overshoot_limit_pt, overshoot_limit_u, overshoot_limit_v, &
123             overshoot_limit_w, passive_scalar, pch_index, phi, & 
124             plant_canopy, prandtl_layer, precipitation, pt_reference, &
125             pt_surface, pt_surface_initial_change, pt_vertical_gradient, &
126             pt_vertical_gradient_level, q_surface, q_surface_initial_change, &
127             q_vertical_gradient, q_vertical_gradient_level, radiation, &
128             random_generator, random_heatflux, recycling_width, rif_max, &
129             rif_min, roughness_length, sa_surface, sa_vertical_gradient, &
130             sa_vertical_gradient_level, scalar_advec, &
131             scalar_exchange_coefficient, statistic_regions, &
132             surface_heatflux, surface_pressure, surface_scalarflux, &
133             surface_waterflux, s_surface, s_surface_initial_change, &
134             s_vertical_gradient, s_vertical_gradient_level, timestep_scheme, &
135             topography, topography_grid_convention, top_heatflux, &
136             top_momentumflux_u, top_momentumflux_v, &
137             top_salinityflux, turbulent_inflow, ug_surface, &
138             ug_vertical_gradient, ug_vertical_gradient_level, u_bulk, &
139             ups_limit_e, ups_limit_pt, ups_limit_u, ups_limit_v, ups_limit_w, &
140             use_surface_fluxes, use_top_fluxes, use_ug_for_galilei_tr, &
141             use_upstream_for_tke, vg_surface, vg_vertical_gradient, &
142             vg_vertical_gradient_level, v_bulk, wall_adjustment, &
143             wall_heatflux, wall_humidityflux, wall_scalarflux, &
144             ws_vertical_gradient, ws_vertical_gradient_level
145
146
147    NAMELIST /d3par/   averaging_interval,  averaging_interval_pr, &
148                       call_psolver_at_all_substeps, cfl_factor, &
149                       create_disturbances, cross_normalized_x, &
150                       cross_normalized_y, cross_profiles, cross_ts_uymax, &
151                       cross_ts_uymin, cross_xtext, cycle_mg, data_output, &
152                       data_output_format, &
153                       data_output_masks, &
154                       data_output_pr, &
155                       data_output_2d_on_each_pe, disturbance_amplitude, &
156                       disturbance_energy_limit, disturbance_level_b, &
157                       disturbance_level_t, do2d_at_begin, do3d_at_begin, &
158                       do3d_compress, do3d_comp_prec, dt, dt_averaging_input, &
159                       dt_averaging_input_pr, dt_coupling, dt_data_output, &
160                       dt_data_output_av, dt_disturb, dt_domask, dt_dopr, &
161                       dt_dopr_listing, dt_dots, dt_do2d_xy, dt_do2d_xz, &
162                       dt_do2d_yz, dt_do3d, dt_max, dt_restart, dt_run_control,&
163                       end_time, force_print_header, &
164                       mask_scale_x, mask_scale_y, mask_scale_z, &
165                       mask_x, mask_y, mask_z,  &
166                       mask_x_loop, mask_y_loop, mask_z_loop, &
167                       mg_cycles, mg_switch_to_pe0_level, &
168                       netcdf_data_format, &
169                       ngsrb, normalizing_region, npex, npey, nsor, nz_do3d, &
170                       omega_sor, &
171                       prandtl_number, precipitation_amount_interval, &
172                       profile_columns, profile_rows, psolver, &
173                       rayleigh_damping_factor, rayleigh_damping_height, &
174                       residual_limit, restart_time, section_xy, section_xz, &
175                       section_yz, skip_time_data_output, &
176                       skip_time_data_output_av, skip_time_dopr, &
177                       skip_time_do2d_xy, skip_time_do2d_xz, &
178                       skip_time_do2d_yz, skip_time_do3d, skip_time_domask, &
179                       termination_time_needed, use_prior_plot1d_parameters, &
180                       z_max_do1d, z_max_do1d_normalized, z_max_do2d
181
182
183    NAMELIST /envpar/  host, local_dvrserver_running, maximum_cpu_time_allowed,  &
184                       revision, return_addres, return_username, run_identifier, &
185                       tasks_per_node, write_binary
186
187!
188!-- Open the NAMELIST-file which is send with this job
189    CALL check_open( 11 )
190
191!
192!-- Read the control parameters for initialization.
193!-- The namelist "inipar" must be provided in the NAMELIST-file. If this is
194!-- not the case and the file contains - instead of "inipar" - any other
195!-- namelist, a read error is created on t3e and control is transferred
196!-- to the statement with label 10. Therefore, on t3e machines one can not
197!-- distinguish between errors produced by a wrong "inipar" namelist or
198!-- because this namelist is totally missing.
199    READ ( 11, inipar, ERR=10, END=11 )
200    GOTO 12
201 10 message_string = 'errors in \$inipar &or no \$inipar-namelist ' // &
202                     'found (CRAY-machines only)'
203    CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 )
204
205 11 message_string = 'no \$inipar-namelist found'
206    CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 )
207
208!
209!-- If required, read control parameters from restart file (produced by
210!-- a prior run). All PEs are reading from file created by PE0 (see check_open)
211 12 IF ( TRIM( initializing_actions ) == 'read_restart_data' )  THEN
212
213       CALL read_var_list
214!
215!--    The restart file will be reopened when reading the subdomain data
216       CALL close_file( 13 )
217
218!
219!--    Increment the run count
220       runnr = runnr + 1
221
222    ENDIF
223
224!
225!-- Definition of names of areas used for computing statistics. They must
226!-- be defined at this place, because they are allowed to be redefined by
227!-- the user in user_parin.
228    region = 'total domain'
229
230!
231!-- Read runtime parameters given by the user for this run (namelist "d3par").
232!-- The namelist "d3par" can be omitted. In that case, default values are
233!-- used for the parameters.
234    READ ( 11, d3par, END=20 )
235
236!
237!-- Read control parameters for optionally used model software packages
238 20 CALL package_parin
239
240!
241!-- Read user-defined variables
242    CALL user_parin
243
244!
245!-- Check in case of initial run, if the grid point numbers are well defined
246!-- and allocate some arrays which are already needed in init_pegrid or
247!-- check_parameters. During restart jobs, these arrays will be allocated
248!-- in read_var_list. All other arrays are allocated in init_3d_model.
249    IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
250
251       IF ( nx <= 0 )  THEN
252          WRITE( message_string, * ) 'no value or wrong value given for nx: ',&
253                                     'nx=', nx
254          CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 )
255       ENDIF
256       IF ( ny <= 0 )  THEN
257          WRITE( message_string, * ) 'no value or wrong value given for ny: ',&
258                                     'ny=', ny
259          CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 )
260       ENDIF
261       IF ( nz <= 0 )  THEN
262          WRITE( message_string, * ) 'no value or wrong value given for nz: ',&
263                                     'nz=', nz
264          CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 )
265       ENDIF
266!
267!--    ATTENTION: in case of changes to the following statement please also
268!--    check the allocate statement in routine read_var_list
269       ALLOCATE( lad(0:nz+1),pt_init(0:nz+1), q_init(0:nz+1), sa_init(0:nz+1), &
270                 ug(0:nz+1), u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1),       &
271                 hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions),        &
272                 hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
273       hom = 0.0
274
275    ENDIF
276
277!
278!-- NAMELIST-file is not needed anymore
279    CALL close_file( 11 )
280
281!
282!-- Read values of environment variables (this NAMELIST file is generated by
283!-- mrun)
284    OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 )
285    READ ( 90, envpar, ERR=31, END=32 )
286    CLOSE ( 90 )
287    RETURN
288
289 30 message_string = 'local file ENVPAR not found' // &
290                     '&some variables for steering may not be properly set'
291    CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 )
292    RETURN
293
294 31 message_string = 'errors in local file ENVPAR' // &
295                     '&some variables for steering may not be properly set'
296    CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 )
297    RETURN
298
299 32 message_string = 'no envpar-NAMELIST found in local file ENVPAR'  // &
300                     '&some variables for steering may not be properly set'
301    CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 )
302
303 END SUBROUTINE parin
Note: See TracBrowser for help on using the repository browser.