source: palm/trunk/SOURCE/parin.f90 @ 274

Last change on this file since 274 was 274, checked in by heinze, 12 years ago

Indentation of the message calls corrected

  • Property svn:keywords set to Id
File size: 11.9 KB
Line 
1 SUBROUTINE parin
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! -----------------
6! +local_dvrserver_running in envpar
7! Output of messages replaced by message handling routine.
8! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
9! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
10! dp_smooth, dpdxy, u_bulk, v_bulk in inipar
11! topography_grid_convention moved from userpar
12!
13! Former revisions:
14! -----------------
15! $Id: parin.f90 274 2009-03-26 15:11:21Z heinze $
16!
17! 197 2008-09-16 15:29:03Z raasch
18! +cthf,leaf_surface_concentration, scalar_exchange_coefficient
19! +inflow_damping_height, inflow_damping_width, recycling_width,
20! turbulent_inflow in inipar, -skip_time_dosp in d3par,
21! allocation of hom_sum moved from init_3d_model to here,
22! npex, npey moved from inipar to d3par, setting of myid_char_14 removed,
23! lad is allways allocated
24!
25! 138 2007-11-28 10:03:58Z letzel
26! +canopy_mode, drag_coefficient, lad_surface, lad_vertical_gradient,
27! lad_vertical_gradient_level, pch_index, plant_canopy,
28! +allocation of leaf area density field
29!
30! 108 2007-08-24 15:10:38Z letzel
31! +e_init, top_momentumflux_u|v in inipar, +dt_coupling in d3par
32!
33! 95 2007-06-02 16:48:38Z raasch
34! +bc_sa_t, bottom_salinityflux, ocean, sa_surface, sa_vertical_gradient,
35! sa_vertical_gradient_level, top_salinityflux in inipar,
36! sa_init is allocated
37!
38! 87 2007-05-22 15:46:47Z raasch
39! Size of hom increased by the maximum number of user-defined profiles,
40! var_hom renamed pr_palm
41!
42! 82 2007-04-16 15:40:52Z raasch
43! +return_addres, return_username in envpar
44!
45! 75 2007-03-22 09:54:05Z raasch
46! +dt_max, netcdf_64bit_3d, precipitation_amount_interval in d3par,
47! +loop_optimization, pt_reference in inipar, -data_output_ts,
48! moisture renamed humidity
49!
50! 20 2007-02-26 00:12:32Z raasch
51! +top_heatflux, use_top_fluxes in inipar
52!
53! -netcdf_64bit_3d
54!
55! 3 2007-02-13 11:30:58Z raasch
56! +netcdf_64bit_3d in d3par,
57! RCS Log replace by Id keyword, revision history cleaned up
58!
59! Revision 1.57  2007/02/11 13:11:22  raasch
60! Values of environment variables are now read from file ENVPAR instead of
61! reading them with a system call, + NAMELIST envpar
62!
63! Revision 1.1  1997/07/24 11:22:50  raasch
64! Initial revision
65!
66!
67! Description:
68! ------------
69! This subroutine reads variables controling the run from the NAMELIST files
70!------------------------------------------------------------------------------!
71
72    USE arrays_3d
73    USE averaging
74    USE control_parameters
75    USE dvrp_variables
76    USE grid_variables
77    USE indices
78    USE model_1d
79    USE pegrid
80    USE profil_parameter
81    USE statistics
82
83    IMPLICIT NONE
84
85    INTEGER ::  idum
86
87
88    NAMELIST /inipar/  adjust_mixing_length, alpha_surface, bc_e_b, bc_lr, &
89                       bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b, &
90             bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t, &
91             bottom_salinityflux, building_height, building_length_x, &
92             building_length_y, building_wall_left, building_wall_south, &
93             canopy_mode, canyon_height, canyon_width_x, canyon_width_y, &
94             canyon_wall_left, canyon_wall_south, cloud_droplets, &
95             cloud_physics, conserve_volume_flow, conserve_volume_flow_mode, &
96             cthf, cut_spline_overshoot, &
97             damp_level_1d, dissipation_1d, dp_external, dp_level_b, &
98             dp_smooth, dpdxy, drag_coefficient, dt, dt_pr_1d, &
99             dt_run_control_1d, dx, dy, dz, dz_max, dz_stretch_factor, & 
100             dz_stretch_level, e_init, e_min, end_time_1d, fft_method, &
101             galilei_transformation, grid_matching, humidity, &
102             inflow_damping_height, inflow_damping_width, &
103             inflow_disturbance_begin, inflow_disturbance_end, &
104             initializing_actions, km_constant, km_damp_max, lad_surface, &
105             lad_vertical_gradient, lad_vertical_gradient_level, &
106             leaf_surface_concentration, long_filter_factor, &
107             loop_optimization, mixing_length_1d, momentum_advec, &
108             netcdf_precision, nsor_ini, nx, ny, &
109             nz, ocean, omega, outflow_damping_width, overshoot_limit_e, &
110             overshoot_limit_pt, overshoot_limit_u, overshoot_limit_v, &
111             overshoot_limit_w, passive_scalar, pch_index, phi, & 
112             plant_canopy, prandtl_layer, precipitation, pt_reference, &
113             pt_surface, pt_surface_initial_change, pt_vertical_gradient, &
114             pt_vertical_gradient_level, q_surface, q_surface_initial_change, &
115             q_vertical_gradient, q_vertical_gradient_level, radiation, &
116             random_generator, random_heatflux, recycling_width, rif_max, &
117             rif_min, roughness_length, sa_surface, sa_vertical_gradient, &
118             sa_vertical_gradient_level, scalar_advec, &
119             scalar_exchange_coefficient, statistic_regions, &
120             surface_heatflux, surface_pressure, surface_scalarflux, &
121             surface_waterflux, s_surface, s_surface_initial_change, &
122             s_vertical_gradient, s_vertical_gradient_level, timestep_scheme, &
123             topography, topography_grid_convention, top_heatflux, &
124             top_momentumflux_u, top_momentumflux_v, &
125             top_salinityflux, turbulent_inflow, ug_surface, &
126             ug_vertical_gradient, ug_vertical_gradient_level, u_bulk, &
127             ups_limit_e, ups_limit_pt, ups_limit_u, ups_limit_v, ups_limit_w, &
128             use_surface_fluxes, use_top_fluxes, use_ug_for_galilei_tr, &
129             use_upstream_for_tke, vg_surface, vg_vertical_gradient, &
130             vg_vertical_gradient_level, v_bulk, wall_adjustment, wall_heatflux
131
132
133    NAMELIST /d3par/   averaging_interval,  averaging_interval_pr, &
134                       call_psolver_at_all_substeps, cfl_factor, &
135                       create_disturbances, cross_normalized_x, &
136                       cross_normalized_y, cross_profiles, cross_ts_uymax, &
137                       cross_ts_uymin, cross_xtext, cycle_mg, data_output, &
138                       data_output_format, data_output_pr, &
139                       data_output_2d_on_each_pe, disturbance_amplitude, &
140                       disturbance_energy_limit, disturbance_level_b, &
141                       disturbance_level_t, do2d_at_begin, do3d_at_begin, &
142                       do3d_compress, do3d_comp_prec, dt, dt_averaging_input, &
143                       dt_averaging_input_pr, dt_coupling, dt_data_output, &
144                       dt_data_output_av, dt_disturb, dt_dopr, &
145                       dt_dopr_listing, dt_dots, dt_do2d_xy, dt_do2d_xz, &
146                       dt_do2d_yz, dt_do3d, dt_max, dt_restart, dt_run_control,&
147                       end_time, force_print_header, mg_cycles, &
148                       mg_switch_to_pe0_level, netcdf_64bit, netcdf_64bit_3d, &
149                       ngsrb, normalizing_region, npex, npey, nsor, nz_do3d, &
150                       omega_sor, &
151                       prandtl_number, precipitation_amount_interval, &
152                       profile_columns, profile_rows, psolver, &
153                       rayleigh_damping_factor, rayleigh_damping_height, &
154                       residual_limit, restart_time, section_xy, section_xz, &
155                       section_yz, skip_time_data_output, &
156                       skip_time_data_output_av, skip_time_dopr, &
157                       skip_time_do2d_xy, skip_time_do2d_xz, &
158                       skip_time_do2d_yz, skip_time_do3d, &
159                       termination_time_needed, use_prior_plot1d_parameters, &
160                       z_max_do1d, z_max_do1d_normalized, z_max_do2d
161
162
163    NAMELIST /envpar/  host, local_dvrserver_running, maximum_cpu_time_allowed,  &
164                       revision, return_addres, return_username, run_identifier, &
165                       tasks_per_node, write_binary
166
167!
168!-- Open the NAMELIST-file which is send with this job
169    CALL check_open( 11 )
170
171!
172!-- Read the control parameters for initialization.
173!-- The namelist "inipar" must be provided in the NAMELIST-file. If this is
174!-- not the case and the file contains - instead of "inipar" - any other
175!-- namelist, a read error is created on t3e and control is transferred
176!-- to the statement with label 10. Therefore, on t3e machines one can not
177!-- distinguish between errors produced by a wrong "inipar" namelist or
178!-- because this namelist is totally missing.
179    READ ( 11, inipar, ERR=10, END=11 )
180    GOTO 12
181 10 message_string = 'errors in \$inipar &or no \$inipar-namelist ' // &
182                     'found (CRAY-machines only)'
183    CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 )
184
185 11 message_string = 'no \$inipar-namelist found'
186    CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 )
187
188!
189!-- If required, read control parameters from restart file (produced by
190!-- a prior run). All PEs are reading from file created by PE0 (see check_open)
191 12 IF ( TRIM( initializing_actions ) == 'read_restart_data' )  THEN
192
193       CALL read_var_list
194!
195!--    The restart file will be reopened when reading the subdomain data
196       CALL close_file( 13 )
197
198!
199!--    Increment the run count
200       runnr = runnr + 1
201
202    ENDIF
203
204!
205!-- Definition of names of areas used for computing statistics. They must
206!-- be defined at this place, because they are allowed to be redefined by
207!-- the user in user_parin.
208    region = 'total domain'
209
210!
211!-- Read runtime parameters given by the user for this run (namelist "d3par").
212!-- The namelist "d3par" can be omitted. In that case, default values are
213!-- used for the parameters.
214    READ ( 11, d3par, END=20 )
215
216!
217!-- Read control parameters for optionally used model software packages
218 20 CALL package_parin
219
220!
221!-- Read user-defined variables
222    CALL user_parin
223
224!
225!-- Check in case of initial run, if the grid point numbers are well defined
226!-- and allocate some arrays which are already needed in init_pegrid or
227!-- check_parameters. During restart jobs, these arrays will be allocated
228!-- in read_var_list. All other arrays are allocated in init_3d_model.
229    IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
230
231       IF ( nx <= 0 )  THEN
232          WRITE( message_string, * ) 'no value or wrong value given for nx: ',&
233                                     'nx=', nx
234          CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 )
235       ENDIF
236       IF ( ny <= 0 )  THEN
237          WRITE( message_string, * ) 'no value or wrong value given for ny: ',&
238                                     'ny=', ny
239          CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 )
240       ENDIF
241       IF ( nz <= 0 )  THEN
242          WRITE( message_string, * ) 'no value or wrong value given for nz: ',&
243                                     'nz=', nz
244          CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 )
245       ENDIF
246!
247!--    ATTENTION: in case of changes to the following statement please also
248!--    check the allocate statement in routine read_var_list
249       ALLOCATE( lad(0:nz+1),pt_init(0:nz+1), q_init(0:nz+1), sa_init(0:nz+1), &
250                 ug(0:nz+1), u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1),       &
251                 hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions),        &
252                 hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
253       hom = 0.0
254
255    ENDIF
256
257!
258!-- NAMELIST-file is not needed anymore
259    CALL close_file( 11 )
260
261!
262!-- Read values of environment variables (this NAMELIST file is generated by
263!-- mrun)
264    OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 )
265    READ ( 90, envpar, ERR=31, END=32 )
266    CLOSE ( 90 )
267    RETURN
268
269 30 message_string = 'local file ENVPAR not found' // &
270                     '&some variables for steering may not be properly set'
271    CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 )
272    RETURN
273
274 31 message_string = 'errors in local file ENVPAR' // &
275                     '&some variables for steering may not be properly set'
276    CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 )
277    RETURN
278
279 32 message_string = 'no envpar-NAMELIST found in local file ENVPAR'  // &
280                     '&some variables for steering may not be properly set'
281    CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 )
282
283 END SUBROUTINE parin
Note: See TracBrowser for help on using the repository browser.