source: palm/trunk/SOURCE/parin.f90 @ 241

Last change on this file since 241 was 241, checked in by letzel, 13 years ago
  • Option to predefine a target bulk velocity for conserve_volume_flow
  • Property svn:keywords set to Id
File size: 11.7 KB
Line 
1 SUBROUTINE parin
2
3!------------------------------------------------------------------------------!
4! Actual revisions:
5! -----------------
6! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
7! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
8! dp_smooth, dpdxy, u_bulk, v_bulk in inipar
9!
10! Former revisions:
11! -----------------
12! $Id: parin.f90 241 2009-02-19 16:08:56Z letzel $
13!
14! 197 2008-09-16 15:29:03Z raasch
15! +cthf,leaf_surface_concentration, scalar_exchange_coefficient
16! +inflow_damping_height, inflow_damping_width, recycling_width,
17! turbulent_inflow in inipar, -skip_time_dosp in d3par,
18! allocation of hom_sum moved from init_3d_model to here,
19! npex, npey moved from inipar to d3par, setting of myid_char_14 removed,
20! lad is allways allocated
21!
22! 138 2007-11-28 10:03:58Z letzel
23! +canopy_mode, drag_coefficient, lad_surface, lad_vertical_gradient,
24! lad_vertical_gradient_level, pch_index, plant_canopy,
25! +allocation of leaf area density field
26!
27! 108 2007-08-24 15:10:38Z letzel
28! +e_init, top_momentumflux_u|v in inipar, +dt_coupling in d3par
29!
30! 95 2007-06-02 16:48:38Z raasch
31! +bc_sa_t, bottom_salinityflux, ocean, sa_surface, sa_vertical_gradient,
32! sa_vertical_gradient_level, top_salinityflux in inipar,
33! sa_init is allocated
34!
35! 87 2007-05-22 15:46:47Z raasch
36! Size of hom increased by the maximum number of user-defined profiles,
37! var_hom renamed pr_palm
38!
39! 82 2007-04-16 15:40:52Z raasch
40! +return_addres, return_username in envpar
41!
42! 75 2007-03-22 09:54:05Z raasch
43! +dt_max, netcdf_64bit_3d, precipitation_amount_interval in d3par,
44! +loop_optimization, pt_reference in inipar, -data_output_ts,
45! moisture renamed humidity
46!
47! 20 2007-02-26 00:12:32Z raasch
48! +top_heatflux, use_top_fluxes in inipar
49!
50! -netcdf_64bit_3d
51!
52! 3 2007-02-13 11:30:58Z raasch
53! +netcdf_64bit_3d in d3par,
54! RCS Log replace by Id keyword, revision history cleaned up
55!
56! Revision 1.57  2007/02/11 13:11:22  raasch
57! Values of environment variables are now read from file ENVPAR instead of
58! reading them with a system call, + NAMELIST envpar
59!
60! Revision 1.1  1997/07/24 11:22:50  raasch
61! Initial revision
62!
63!
64! Description:
65! ------------
66! This subroutine reads variables controling the run from the NAMELIST files
67!------------------------------------------------------------------------------!
68
69    USE arrays_3d
70    USE averaging
71    USE control_parameters
72    USE grid_variables
73    USE indices
74    USE model_1d
75    USE pegrid
76    USE profil_parameter
77    USE statistics
78
79    IMPLICIT NONE
80
81    INTEGER ::  idum
82
83
84    NAMELIST /inipar/  adjust_mixing_length, alpha_surface, bc_e_b, bc_lr, &
85                       bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b, &
86             bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t, &
87             bottom_salinityflux, building_height, building_length_x, &
88             building_length_y, building_wall_left, building_wall_south, &
89             canopy_mode, canyon_height, canyon_width_x, canyon_width_y, &
90             canyon_wall_left, canyon_wall_south, cloud_droplets, &
91             cloud_physics, conserve_volume_flow, conserve_volume_flow_mode, &
92             cthf, cut_spline_overshoot, &
93             damp_level_1d, dissipation_1d, dp_external, dp_level_b, &
94             dp_smooth, dpdxy, drag_coefficient, dt, dt_pr_1d, &
95             dt_run_control_1d, dx, dy, dz, dz_max, dz_stretch_factor, & 
96             dz_stretch_level, e_init, e_min, end_time_1d, fft_method, &
97             galilei_transformation, grid_matching, humidity, &
98             inflow_damping_height, inflow_damping_width, &
99             inflow_disturbance_begin, inflow_disturbance_end, &
100             initializing_actions, km_constant, km_damp_max, lad_surface, &
101             lad_vertical_gradient, lad_vertical_gradient_level, &
102             leaf_surface_concentration, long_filter_factor, &
103             loop_optimization, mixing_length_1d, momentum_advec, &
104             netcdf_precision, nsor_ini, nx, ny, &
105             nz, ocean, omega, outflow_damping_width, overshoot_limit_e, &
106             overshoot_limit_pt, overshoot_limit_u, overshoot_limit_v, &
107             overshoot_limit_w, passive_scalar, pch_index, phi, & 
108             plant_canopy, prandtl_layer, precipitation, pt_reference, &
109             pt_surface, pt_surface_initial_change, pt_vertical_gradient, &
110             pt_vertical_gradient_level, q_surface, q_surface_initial_change, &
111             q_vertical_gradient, q_vertical_gradient_level, radiation, &
112             random_generator, random_heatflux, recycling_width, rif_max, &
113             rif_min, roughness_length, sa_surface, sa_vertical_gradient, &
114             sa_vertical_gradient_level, scalar_advec, &
115             scalar_exchange_coefficient, statistic_regions, &
116             surface_heatflux, surface_pressure, surface_scalarflux, &
117             surface_waterflux, s_surface, s_surface_initial_change, &
118             s_vertical_gradient, s_vertical_gradient_level, timestep_scheme, &
119             topography, top_heatflux, top_momentumflux_u, top_momentumflux_v, &
120             top_salinityflux, turbulent_inflow, ug_surface, &
121             ug_vertical_gradient, ug_vertical_gradient_level, u_bulk, &
122             ups_limit_e, ups_limit_pt, ups_limit_u, ups_limit_v, ups_limit_w, &
123             use_surface_fluxes, use_top_fluxes, use_ug_for_galilei_tr, &
124             use_upstream_for_tke, vg_surface, vg_vertical_gradient, &
125             vg_vertical_gradient_level, v_bulk, wall_adjustment, wall_heatflux
126
127
128    NAMELIST /d3par/   averaging_interval,  averaging_interval_pr, &
129                       call_psolver_at_all_substeps, cfl_factor, &
130                       create_disturbances, cross_normalized_x, &
131                       cross_normalized_y, cross_profiles, cross_ts_uymax, &
132                       cross_ts_uymin, cross_xtext, cycle_mg, data_output, &
133                       data_output_format, data_output_pr, &
134                       data_output_2d_on_each_pe, disturbance_amplitude, &
135                       disturbance_energy_limit, disturbance_level_b, &
136                       disturbance_level_t, do2d_at_begin, do3d_at_begin, &
137                       do3d_compress, do3d_comp_prec, dt, dt_averaging_input, &
138                       dt_averaging_input_pr, dt_coupling, dt_data_output, &
139                       dt_data_output_av, dt_disturb, dt_dopr, &
140                       dt_dopr_listing, dt_dots, dt_do2d_xy, dt_do2d_xz, &
141                       dt_do2d_yz, dt_do3d, dt_max, dt_restart, dt_run_control,&
142                       end_time, force_print_header, mg_cycles, &
143                       mg_switch_to_pe0_level, netcdf_64bit, netcdf_64bit_3d, &
144                       ngsrb, normalizing_region, npex, npey, nsor, nz_do3d, &
145                       omega_sor, &
146                       prandtl_number, precipitation_amount_interval, &
147                       profile_columns, profile_rows, psolver, &
148                       rayleigh_damping_factor, rayleigh_damping_height, &
149                       residual_limit, restart_time, section_xy, section_xz, &
150                       section_yz, skip_time_data_output, &
151                       skip_time_data_output_av, skip_time_dopr, &
152                       skip_time_do2d_xy, skip_time_do2d_xz, &
153                       skip_time_do2d_yz, skip_time_do3d, &
154                       termination_time_needed, use_prior_plot1d_parameters, &
155                       z_max_do1d, z_max_do1d_normalized, z_max_do2d
156
157
158    NAMELIST /envpar/  host, maximum_cpu_time_allowed, revision, return_addres,&
159                       return_username, run_identifier, tasks_per_node, &
160                       write_binary
161
162!
163!-- Open the NAMELIST-file which is send with this job
164    CALL check_open( 11 )
165
166!
167!-- Read the control parameters for initialization.
168!-- The namelist "inipar" must be provided in the NAMELIST-file. If this is
169!-- not the case and the file contains - instead of "inipar" - any other
170!-- namelist, a read error is created on t3e and control is transferred
171!-- to the statement with label 10. Therefore, on t3e machines one can not
172!-- distinguish between errors produced by a wrong "inipar" namelist or
173!-- because this namelist is totally missing.
174    READ ( 11, inipar, ERR=10, END=11 )
175    GOTO 12
176 10 IF ( myid == 0 )  THEN
177       PRINT*, '+++ parin: errors in \$inipar'
178       PRINT*, '           or no \$inipar-namelist found (CRAY-machines only)' 
179    ENDIF
180    CALL local_stop
181 11 IF ( myid == 0 )  THEN
182       PRINT*, '+++ parin: no \$inipar-namelist found'
183    ENDIF
184    CALL local_stop
185
186!
187!-- If required, read control parameters from restart file (produced by
188!-- a prior run). All PEs are reading from file created by PE0 (see check_open)
189 12 IF ( TRIM( initializing_actions ) == 'read_restart_data' )  THEN
190
191       CALL read_var_list
192!
193!--    The restart file will be reopened when reading the subdomain data
194       CALL close_file( 13 )
195
196!
197!--    Increment the run count
198       runnr = runnr + 1
199
200    ENDIF
201
202!
203!-- Definition of names of areas used for computing statistics. They must
204!-- be defined at this place, because they are allowed to be redefined by
205!-- the user in user_parin.
206    region = 'total domain'
207
208!
209!-- Read runtime parameters given by the user for this run (namelist "d3par").
210!-- The namelist "d3par" can be omitted. In that case, default values are
211!-- used for the parameters.
212    READ ( 11, d3par, END=20 )
213
214!
215!-- Read control parameters for optionally used model software packages
216 20 CALL package_parin
217
218!
219!-- Read user-defined variables
220    CALL user_parin
221
222!
223!-- Check in case of initial run, if the grid point numbers are well defined
224!-- and allocate some arrays which are already needed in init_pegrid or
225!-- check_parameters. During restart jobs, these arrays will be allocated
226!-- in read_var_list. All other arrays are allocated in init_3d_model.
227    IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
228
229       IF ( nx <= 0 )  THEN
230          IF ( myid == 0 )  THEN
231             PRINT*, '+++ parin: no value or wrong value given for nx: nx=', nx
232          ENDIF
233          CALL local_stop
234       ENDIF
235       IF ( ny <= 0 )  THEN
236          IF ( myid == 0 )  THEN
237             PRINT*, '+++ parin: no value or wrong value given for ny: ny=', ny
238          ENDIF
239          CALL local_stop
240       ENDIF
241       IF ( nz <= 0 )  THEN
242          IF ( myid == 0 )  THEN
243             PRINT*, '+++ parin: no value or wrong value given for nz: nz=', nz
244          ENDIF
245          CALL local_stop
246       ENDIF
247!
248!--    ATTENTION: in case of changes to the following statement please also
249!--    check the allocate statement in routine read_var_list
250       ALLOCATE( lad(0:nz+1),pt_init(0:nz+1), q_init(0:nz+1), sa_init(0:nz+1), &
251                 ug(0:nz+1), u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1),       &
252                 hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions),        &
253                 hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
254       hom = 0.0
255
256    ENDIF
257
258!
259!-- NAMELIST-file is not needed anymore
260    CALL close_file( 11 )
261
262!
263!-- Read values of environment variables (this NAMELIST file is generated by
264!-- mrun)
265    OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 )
266    READ ( 90, envpar, ERR=31, END=32 )
267    CLOSE ( 90 )
268    RETURN
269
270 30 IF ( myid == 0 )  THEN
271       PRINT*, '+++ parin: WARNING: local file ENVPAR not found'
272       PRINT*, '           some variables for steering may not be properly set'
273    ENDIF
274    RETURN
275
276 31 IF ( myid == 0 )  THEN
277       PRINT*, '+++ parin: WARNING: errors in local file ENVPAR'
278       PRINT*, '           some variables for steering may not be properly set'
279    ENDIF
280    RETURN
281
282 32 IF ( myid == 0 )  THEN
283       PRINT*, '+++ parin: WARNING: no envpar-NAMELIST found in local file ', &
284                           'ENVPAR'
285       PRINT*, '           some variables for steering may not be properly set'
286    ENDIF
287
288 END SUBROUTINE parin
Note: See TracBrowser for help on using the repository browser.