source: palm/trunk/SOURCE/palm.f90 @ 2237

!> @file palm.f90
!------------------------------------------------------------------------------!
! This file is part of PALM.
!
! PALM is free software: you can redistribute it and/or modify it under the
! terms of the GNU General Public License as published by the Free Software
! Foundation, either version 3 of the License, or (at your option) any later
! version.
!
! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License along with
! PALM. If not, see <http://www.gnu.org/licenses/>.
!
! Copyright 1997-2017 Leibniz Universitaet Hannover
!------------------------------------------------------------------------------!
!
! Current revisions:
! -----------------
! 
! 
! Former revisions:
! -----------------
! $Id: palm.f90 2233 2017-05-30 18:08:54Z suehring $
!
! 2232 2017-05-30 17:47:52Z suehring
! Renamed wall_flags_0 and wall_flags_00 into advc_flags_1 and advc_flags_2, 
! respectively, within copyin statement. Moreover, introduced further flag 
! array wall_flags_0. 
! Remove unused variables from ONLY list.
! 
! 2178 2017-03-17 11:07:39Z hellstea
! Calls for pmci_ensure_nest_mass_conservation and pres are added after
! the nest initialization
!
! 2118 2017-01-17 16:38:49Z raasch
! OpenACC directives and related code removed
! 
! 2011 2016-09-19 17:29:57Z kanani
! Flag urban_surface is now defined in module control_parameters.
! 
! 2007 2016-08-24 15:47:17Z kanani
! Temporarily added CALL for writing of restart data for urban surface model
! 
! 2000 2016-08-20 18:09:15Z knoop
! Forced header and separation lines into 80 columns
! 
! 1976 2016-07-27 13:28:04Z maronga
! Added call to radiation_last_actions for binary output of land surface model 
! data
! 
! 1972 2016-07-26 07:52:02Z maronga
! Added call to lsm_last_actions for binary output of land surface model data
! 
! 1960 2016-07-12 16:34:24Z suehring
! Separate humidity and passive scalar
! 
! 1834 2016-04-07 14:34:20Z raasch
! Initial version of purely vertical nesting introduced. 
! 
! 1833 2016-04-07 14:23:03Z raasch
! required user interface version changed
!
! 1808 2016-04-05 19:44:00Z raasch
! routine local_flush replaced by FORTRAN statement
!
! 1783 2016-03-06 18:36:17Z raasch
! required user interface version changed
!
! 1781 2016-03-03 15:12:23Z raasch
! pmc initialization moved from time_integration to here
!
! 1779 2016-03-03 08:01:28Z raasch
! setting of nest_domain and coupling_char moved to the pmci
!
! 1764 2016-02-28 12:45:19Z raasch
! cpp-statements for nesting removed, communicator settings cleaned up
!
! 1762 2016-02-25 12:31:13Z hellstea
! Introduction of nested domain feature
!
! 1747 2016-02-08 12:25:53Z raasch
! OpenACC-adjustment for new surface layer parameterization
!
! 1682 2015-10-07 23:56:08Z knoop
! Code annotations made doxygen readable 
!
! 1668 2015-09-23 13:45:36Z raasch
! warning replaced by abort in case of failed user interface check
!
! 1666 2015-09-23 07:31:10Z raasch
! check for user's interface version added
!
! 1482 2014-10-18 12:34:45Z raasch
! adjustments for using CUDA-aware OpenMPI
!
! 1468 2014-09-24 14:06:57Z maronga
! Adapted for use on up to 6-digit processor cores
! 
! 1402 2014-05-09 14:25:13Z raasch
! location messages added
! 
! 1374 2014-04-25 12:55:07Z raasch
! bugfix: various modules added
!
! 1320 2014-03-20 08:40:49Z raasch
! ONLY-attribute added to USE-statements,
! kind-parameters added to all INTEGER and REAL declaration statements,
! kinds are defined in new module kinds,
! old module precision_kind is removed,
! revision history before 2012 removed,
! comment fields (!:) to be used for variable explanations added to
! all variable declaration statements
!
! 1318 2014-03-17 13:35:16Z raasch
! module interfaces removed
!
! 1241 2013-10-30 11:36:58Z heinze
! initialization of nuding and large scale forcing from external file
!
! 1221 2013-09-10 08:59:13Z raasch
! +wall_flags_00, rflags_invers, rflags_s_inner in copyin statement
!
! 1212 2013-08-15 08:46:27Z raasch
! +tri in copyin statement
!
! 1179 2013-06-14 05:57:58Z raasch
! ref_state added to copyin-list
!
! 1113 2013-03-10 02:48:14Z raasch
! openACC statements modified
!
! 1111 2013-03-08 23:54:10Z raasch
! openACC statements updated
!
! 1092 2013-02-02 11:24:22Z raasch
! unused variables removed
!
! 1036 2012-10-22 13:43:42Z raasch
! code put under GPL (PALM 3.9)
!
! 1015 2012-09-27 09:23:24Z raasch
! Version number changed from 3.8 to 3.8a.
! OpenACC statements added + code changes required for GPU optimization
!
! 849 2012-03-15 10:35:09Z raasch
! write_particles renamed lpm_write_restart_file
!
! Revision 1.1  1997/07/24 11:23:35  raasch
! Initial revision
!
!
! Description:
! ------------
!> Large-Eddy Simulation (LES) model for the convective boundary layer, 
!> optimized for use on parallel machines (implementation realized using the
!> Message Passing Interface (MPI)). The model can also be run on vector machines
!> (less well optimized) and workstations. Versions for the different types of 
!> machines are controlled via cpp-directives.
!> Model runs are only feasible using the ksh-script mrun.
!>
!> @todo create routine last_actions instead of calling lsm_last_actions etc.
!> @todo eventually move CALL usm_write_restart_data to suitable location
!------------------------------------------------------------------------------!
 PROGRAM palm
 

    USE arrays_3d

    USE control_parameters,                                                    &

        ONLY:  cloud_physics, constant_diffusion, coupling_char, coupling_mode,&
               do2d_at_begin, do3d_at_begin, humidity, initializing_actions,   &
               land_surface, io_blocks, io_group,                              &
               large_scale_forcing, message_string, microphysics_seifert,      &
               nest_domain, neutral,                                           &
               nudging, passive_scalar, simulated_time, simulated_time_chr,    &
               urban_surface,                                                  &
               user_interface_current_revision,                                &
               user_interface_required_revision, version, wall_heatflux,       &
               write_binary

    USE cpulog,                                                                &
        ONLY:  cpu_log, log_point, cpu_statistics

    USE indices,                                                               &
        ONLY:  nbgp

    USE kinds

    USE land_surface_model_mod,                                                &
        ONLY:  lsm_last_actions

    USE ls_forcing_mod,                                                        &
        ONLY:  init_ls_forcing

    USE nudge_mod,                                                             &
        ONLY:  init_nudge

    USE particle_attributes,                                                   &
        ONLY:  particle_advection

    USE pegrid

    USE pmc_interface,                                                         &
        ONLY:  cpl_id, nested_run, pmci_child_initialize, pmci_init,           &
               pmci_modelconfiguration, pmci_parent_initialize,                &
               pmci_ensure_nest_mass_conservation

    USE radiation_model_mod,                                                   &
        ONLY:  radiation, radiation_last_actions
       
    USE urban_surface_mod,                                                     &
        ONLY:  usm_write_restart_data        

    IMPLICIT NONE

!
!-- Local variables
    CHARACTER(LEN=9)  ::  time_to_string  !<
    CHARACTER(LEN=10) ::  env_string      !< to store string of environment var
    INTEGER(iwp)      ::  env_stat        !< to hold status of GET_ENV
    INTEGER(iwp)      ::  i               !<
    INTEGER(iwp)      ::  myid_openmpi    !< OpenMPI local rank for CUDA aware MPI

    version = 'PALM 4.0'
    user_interface_required_revision = 'r1819'

#if defined( __parallel )
!
!-- MPI initialisation. comm2d is preliminary set, because
!-- it will be defined in init_pegrid but is used before in cpu_log.
    CALL MPI_INIT( ierr )

!
!-- Initialize the coupling for nested-domain runs
!-- comm_palm is the communicator which includes all PEs (MPI processes)
!-- available for this (nested) model. If it is not a nested run, comm_palm
!-- is returned as MPI_COMM_WORLD
    CALL pmci_init( comm_palm )
    comm2d = comm_palm
!
!-- Get the (preliminary) number of MPI processes and the local PE-id (in case
!-- of a further communicator splitting in init_coupling, these numbers will
!-- be changed in init_pegrid).
    IF ( nested_run )  THEN

       CALL MPI_COMM_SIZE( comm_palm, numprocs, ierr )
       CALL MPI_COMM_RANK( comm_palm, myid, ierr )

    ELSE

       CALL MPI_COMM_SIZE( MPI_COMM_WORLD, numprocs, ierr )
       CALL MPI_COMM_RANK( MPI_COMM_WORLD, myid, ierr )
!
!--    Initialize PE topology in case of coupled atmosphere-ocean runs (comm_palm
!--    will be splitted in init_coupling)
       CALL init_coupling
    ENDIF
#endif

!
!-- Initialize measuring of the CPU-time remaining to the run
    CALL local_tremain_ini

!
!-- Start of total CPU time measuring.
    CALL cpu_log( log_point(1), 'total', 'start' )
    CALL cpu_log( log_point(2), 'initialisation', 'start' )

!
!-- Open a file for debug output
    WRITE (myid_char,'(''_'',I6.6)')  myid
    OPEN( 9, FILE='DEBUG'//TRIM( coupling_char )//myid_char, FORM='FORMATTED' )

!
!-- Initialize dvrp logging. Also, one PE maybe split from the global
!-- communicator for doing the dvrp output. In that case, the number of
!-- PEs available for PALM is reduced by one and communicator comm_palm
!-- is changed respectively.
#if defined( __parallel )
    CALL MPI_COMM_RANK( comm_palm, myid, ierr )
!
!-- TEST OUTPUT (TO BE REMOVED)
    WRITE(9,*) '*** coupling_mode = "', TRIM( coupling_mode ), '"'
    FLUSH( 9 )
    IF ( TRIM( coupling_mode ) /= 'uncoupled' )  THEN
       PRINT*, '*** PE', myid, ' Global target PE:', target_id, &
               TRIM( coupling_mode )
    ENDIF
#endif

    CALL init_dvrp_logging

!
!-- Read control parameters from NAMELIST files and read environment-variables
    CALL parin

!
!-- Check for the user's interface version
    IF ( user_interface_current_revision /= user_interface_required_revision )  &
    THEN
       message_string = 'current user-interface revision "' //                  &
                        TRIM( user_interface_current_revision ) // '" does ' // &
                        'not match the required revision ' //                   &
                        TRIM( user_interface_required_revision )
        CALL message( 'palm', 'PA0169', 1, 2, 0, 6, 0 )
    ENDIF

!
!-- Determine processor topology and local array indices
    CALL init_pegrid

!
!-- Generate grid parameters
    CALL init_grid

!
!-- Initialize nudging if required
    IF ( nudging )  THEN
       CALL init_nudge
    ENDIF

!
!-- Initialize reading of large scale forcing from external file - if required
    IF ( large_scale_forcing )  THEN
       CALL init_ls_forcing
    ENDIF

!
!-- Check control parameters and deduce further quantities
    CALL check_parameters

!
!-- Initialize all necessary variables
    CALL init_3d_model

!
!-- Coupling protocol setup for nested-domain runs
    IF ( nested_run )  THEN
       CALL pmci_modelconfiguration
!
!--    Receive and interpolate initial data on children.
!--    Child initialization must be made first if the model is both child and
!--    parent if necessary
       IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
          CALL pmci_child_initialize
!
!--       Send initial condition data from parent to children
          CALL pmci_parent_initialize
!
!--    Exchange_horiz is needed after the nest initialization
          IF ( nest_domain )  THEN
             CALL exchange_horiz( u, nbgp )
             CALL exchange_horiz( v, nbgp )
             CALL exchange_horiz( w, nbgp )
             IF ( .NOT. neutral )  THEN
                CALL exchange_horiz( pt, nbgp )
             ENDIF
             IF ( .NOT. constant_diffusion )  CALL exchange_horiz( e, nbgp )
             IF ( humidity )  THEN
                CALL exchange_horiz( q, nbgp )
                IF ( cloud_physics  .AND.  microphysics_seifert )  THEN
!                   CALL exchange_horiz( qc, nbgp )
                   CALL exchange_horiz( qr, nbgp ) 
!                   CALL exchange_horiz( nc, nbgp )
                   CALL exchange_horiz( nr, nbgp )
                ENDIF
             ENDIF
             IF ( passive_scalar )  CALL exchange_horiz( s, nbgp )

             CALL pmci_ensure_nest_mass_conservation
             CALL pres
          ENDIF
       ENDIF

    ENDIF

!
!-- Output of program header
    IF ( myid == 0 )  CALL header

    CALL cpu_log( log_point(2), 'initialisation', 'stop' )

!
!-- Set start time in format hh:mm:ss
    simulated_time_chr = time_to_string( simulated_time )

!
!-- If required, output of initial arrays
    IF ( do2d_at_begin )  THEN
       CALL data_output_2d( 'xy', 0 )
       CALL data_output_2d( 'xz', 0 )
       CALL data_output_2d( 'yz', 0 )
    ENDIF

    IF ( do3d_at_begin )  THEN
       CALL data_output_3d( 0 )
    ENDIF

!
!-- Integration of the model equations using timestep-scheme
    CALL time_integration

!
!-- If required, write binary data for restart runs
    IF ( write_binary(1:4) == 'true' )  THEN

       CALL cpu_log( log_point(22), 'write_3d_binary', 'start' )

       CALL location_message( 'writing restart data', .FALSE. )

       CALL check_open( 14 )

       DO  i = 0, io_blocks-1
          IF ( i == io_group )  THEN
!
!--          Write flow field data
             CALL write_3d_binary
          ENDIF
#if defined( __parallel )
          CALL MPI_BARRIER( comm2d, ierr )
#endif
       ENDDO

       CALL location_message( 'finished', .TRUE. )

       CALL cpu_log( log_point(22), 'write_3d_binary', 'stop' )

!
!--    If required, write particle data
       IF ( particle_advection )  CALL lpm_write_restart_file
!
!--    If required, write urban surface data
       IF (urban_surface)  CALL usm_write_restart_data
       
    ENDIF

!
!-- If required, repeat output of header including the required CPU-time
    IF ( myid == 0 )  CALL header
!
!-- If required, final land surface and user-defined actions, and
!-- last actions on the open files and close files. Unit 14 was opened
!-- in write_3d_binary but it is closed here, to allow writing on this
!-- unit in routine user_last_actions.
    CALL cpu_log( log_point(4), 'last actions', 'start' )
    DO  i = 0, io_blocks-1
       IF ( i == io_group )  THEN
          IF ( land_surface )  THEN
             CALL lsm_last_actions
          ENDIF
          IF ( radiation )  THEN
             CALL radiation_last_actions
          ENDIF
          CALL user_last_actions
          IF ( write_binary(1:4) == 'true' )  CALL close_file( 14 )
       ENDIF
#if defined( __parallel )
       CALL MPI_BARRIER( comm2d, ierr )
#endif
    ENDDO
    CALL close_file( 0 )
    CALL close_dvrp
    CALL cpu_log( log_point(4), 'last actions', 'stop' )

#if defined( __mpi2 )
!
!-- Test exchange via intercommunicator in case of a MPI-2 coupling
    IF ( coupling_mode == 'atmosphere_to_ocean' )  THEN
       i = 12345 + myid
       CALL MPI_SEND( i, 1, MPI_INTEGER, myid, 11, comm_inter, ierr )
    ELSEIF ( coupling_mode == 'ocean_to_atmosphere' )  THEN
       CALL MPI_RECV( i, 1, MPI_INTEGER, myid, 11, comm_inter, status, ierr )
       PRINT*, '### myid: ', myid, '   received from atmosphere:  i = ', i
    ENDIF
#endif

!
!-- Take final CPU-time for CPU-time analysis
    CALL cpu_log( log_point(1), 'total', 'stop' )
    CALL cpu_statistics

#if defined( __parallel )
    CALL MPI_FINALIZE( ierr )
#endif

 END PROGRAM palm