Home

Context Navigation

source: palm/trunk/SOURCE/netcdf.f90 @ 342

Last change on this file since 342 was 292, checked in by letzel, 16 years ago
Typographical errors (netcdf) If the inversion height calculated by the prerun is zero, inflow_damping_height must be explicitly specified (init_3d_model) Small bugfix concerning 3d 64bit netcdf output format (header) Adjustments for lcsgib and lcsgih (subjob)
Property svn:keywords set to `Id`
File size: 143.1 KB

Line
1	#if defined( __ibmy_special )
2	@PROCESS NOOPTimize
3	#endif
4	SUBROUTINE define_netcdf_header( callmode, extend, av )
5
6	!------------------------------------------------------------------------------!
7	! Current revisions:
8	! ------------------
9	! NetCDF unit attribute in timeseries output in case of statistic
10	! regions added.
11	! Output of NetCDF messages with aid of message handling routine.
12	! Output of messages replaced by message handling routine.
13	! Typographical errors fixed.
14	!
15	!
16	! Former revisions:
17	! -----------------
18	! $Id: netcdf.f90 292 2009-04-16 16:10:51Z heinze $
19	!
20	! 216 2008-11-25 07:12:43Z raasch
21	! Origin of the xy-coordinate system shifted from the center of the first
22	! grid cell (indices i=0, j=0) to the south-left corner of this cell.
23	!
24	! 189 2008-08-13 17:09:26Z letzel
25	! consistently allow 100 spectra levels instead of 10
26	! bug fix in the determination of the number of output heights for spectra,
27	! +user-defined spectra
28	!
29	! 97 2007-06-21 08:23:15Z raasch
30	! Grids defined for rho and sa
31	!
32	! 48 2007-03-06 12:28:36Z raasch
33	! Output topography height information (zu_s_inner, zw_s_inner) to 2d-xy and 3d
34	! datasets
35	!
36	! RCS Log replace by Id keyword, revision history cleaned up
37	!
38	! Revision 1.12 2006/09/26 19:35:16 raasch
39	! Bugfix yv coordinates for yz cross sections
40	!
41	! Revision 1.1 2005/05/18 15:37:16 raasch
42	! Initial revision
43	!
44	!
45	! Description:
46	! ------------
47	! In case of extend = .FALSE.:
48	! Define all necessary dimensions, axes and variables for the different
49	! NetCDF datasets. This subroutine is called from check_open after a new
50	! dataset is created. It leaves the open NetCDF files ready to write.
51	!
52	! In case of extend = .TRUE.:
53	! Find out if dimensions and variables of an existing file match the values
54	! of the actual run. If so, get all necessary informations (ids, etc.) from
55	! this file.
56	!
57	! Parameter av can assume values 0 (non-averaged data) and 1 (time averaged
58	! data)
59	!------------------------------------------------------------------------------!
60	#if defined( __netcdf )
61
62	USE arrays_3d
63	USE constants
64	USE control_parameters
65	USE grid_variables
66	USE indices
67	USE netcdf_control
68	USE pegrid
69	USE particle_attributes
70	USE profil_parameter
71	USE spectrum
72	USE statistics
73
74
75	IMPLICIT NONE
76
77	CHARACTER (LEN=2) :: suffix
78	CHARACTER (LEN=2), INTENT (IN) :: callmode
79	CHARACTER (LEN=3) :: suffix1
80	CHARACTER (LEN=4) :: grid_x, grid_y, grid_z
81	CHARACTER (LEN=6) :: mode
82	CHARACTER (LEN=10) :: netcdf_var_name, netcdf_var_name_base, &
83	precision, var
84	CHARACTER (LEN=80) :: time_average_text
85	CHARACTER (LEN=2000) :: var_list, var_list_old
86
87	INTEGER :: av, i, id_x, id_y, id_z, j, ns, ns_old, nz_old
88
89	INTEGER, DIMENSION(1) :: id_dim_time_old, id_dim_x_yz_old, &
90	id_dim_y_xz_old, id_dim_zu_sp_old, &
91	id_dim_zu_xy_old, id_dim_zu_3d_old
92
93	LOGICAL :: found
94
95	LOGICAL, INTENT (INOUT) :: extend
96
97	LOGICAL, SAVE :: init_netcdf = .FALSE.
98
99	REAL, DIMENSION(1) :: last_time_coordinate
100
101	REAL, DIMENSION(:), ALLOCATABLE :: netcdf_data
102
103
104	!
105	!-- Initializing actions (return to calling routine check_parameters afterwards)
106	IF ( .NOT. init_netcdf ) THEN
107	!
108	!-- Check and set accuracy for NetCDF output. First set default value
109	nc_precision = NF90_REAL4
110
111	i = 1
112	DO WHILE ( netcdf_precision(i) /= ' ' )
113	j = INDEX( netcdf_precision(i), '_' )
114	IF ( j == 0 ) THEN
115	WRITE ( message_string, * ) 'netcdf_precision must contain a ', &
116	'"_"netcdf_precision(', i, ')="', &
117	TRIM( netcdf_precision(i) ),'"'
118	CALL message( 'define_netcdf_header', 'PA0241', 1, 2, 0, 6, 0 )
119	ENDIF
120
121	var = netcdf_precision(i)(1:j-1)
122	precision = netcdf_precision(i)(j+1:)
123
124	IF ( precision == 'NF90_REAL4' ) THEN
125	j = NF90_REAL4
126	ELSEIF ( precision == 'NF90_REAL8' ) THEN
127	j = NF90_REAL8
128	ELSE
129	WRITE ( message_string, * ) 'illegal netcdf precision: ', &
130	'netcdf_precision(', i, ')="', &
131	TRIM( netcdf_precision(i) ),'"'
132	CALL message( 'define_netcdf_header', 'PA0242', 1, 2, 0, 6, 0 )
133	ENDIF
134
135	SELECT CASE ( var )
136	CASE ( 'xy' )
137	nc_precision(1) = j
138	CASE ( 'xz' )
139	nc_precision(2) = j
140	CASE ( 'yz' )
141	nc_precision(3) = j
142	CASE ( '2d' )
143	nc_precision(1:3) = j
144	CASE ( '3d' )
145	nc_precision(4) = j
146	CASE ( 'pr' )
147	nc_precision(5) = j
148	CASE ( 'ts' )
149	nc_precision(6) = j
150	CASE ( 'sp' )
151	nc_precision(7) = j
152	CASE ( 'prt' )
153	nc_precision(8) = j
154	CASE ( 'all' )
155	nc_precision = j
156
157	CASE DEFAULT
158	WRITE ( message_string, * ) 'unknown variable in inipar ', &
159	'assignment: netcdf_precision(', i, ')="', &
160	TRIM( netcdf_precision(i) ),'"'
161	CALL message( 'define_netcdf_header', 'PA0243', 1, 2, 0, 6, 0 )
162
163	END SELECT
164
165	i = i + 1
166	IF ( i > 10 ) EXIT
167	ENDDO
168
169	init_netcdf = .TRUE.
170
171	RETURN
172
173	ENDIF
174
175	!
176	!-- Determine the mode to be processed
177	IF ( extend ) THEN
178	mode = callmode // '_ext'
179	ELSE
180	mode = callmode // '_new'
181	ENDIF
182
183	!
184	!-- Select the mode to be processed. Possibilities are 3d, xy, xz, yz,
185	!-- pr and ts.
186	SELECT CASE ( mode )
187
188	CASE ( '3d_new' )
189
190	!
191	!-- Define some global attributes of the dataset
192	nc_stat = NF90_PUT_ATT( id_set_3d(av), NF90_GLOBAL, 'Conventions', &
193	'COARDS' )
194	CALL handle_netcdf_error( 'netcdf', 62 )
195
196	IF ( av == 0 ) THEN
197	time_average_text = ' '
198	ELSE
199	WRITE (time_average_text, '('', '',F7.1,'' s average'')') &
200	averaging_interval
201	ENDIF
202	nc_stat = NF90_PUT_ATT( id_set_3d(av), NF90_GLOBAL, 'title', &
203	TRIM( run_description_header ) // &
204	TRIM( time_average_text ) )
205	CALL handle_netcdf_error( 'netcdf', 63 )
206	IF ( av == 1 ) THEN
207	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval
208	nc_stat = NF90_PUT_ATT( id_set_3d(av), NF90_GLOBAL, 'time_avg', &
209	TRIM( time_average_text ) )
210	CALL handle_netcdf_error( 'netcdf', 63 )
211	ENDIF
212
213	!
214	!-- Define time coordinate for volume data (unlimited dimension)
215	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'time', NF90_UNLIMITED, &
216	id_dim_time_3d(av) )
217	CALL handle_netcdf_error( 'netcdf', 64 )
218
219	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'time', NF90_DOUBLE, &
220	id_dim_time_3d(av), id_var_time_3d(av) )
221	CALL handle_netcdf_error( 'netcdf', 65 )
222
223	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_time_3d(av), 'units', &
224	'seconds')
225	CALL handle_netcdf_error( 'netcdf', 66 )
226
227	!
228	!-- Define spatial dimensions and coordinates:
229	!-- Define vertical coordinate grid (zu grid)
230	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'zu_3d', nz_do3d-nzb+1, &
231	id_dim_zu_3d(av) )
232	CALL handle_netcdf_error( 'netcdf', 67 )
233
234	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'zu_3d', NF90_DOUBLE, &
235	id_dim_zu_3d(av), id_var_zu_3d(av) )
236	CALL handle_netcdf_error( 'netcdf', 68 )
237
238	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_zu_3d(av), 'units', &
239	'meters' )
240	CALL handle_netcdf_error( 'netcdf', 69 )
241
242	!
243	!-- Define vertical coordinate grid (zw grid)
244	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'zw_3d', nz_do3d-nzb+1, &
245	id_dim_zw_3d(av) )
246	CALL handle_netcdf_error( 'netcdf', 70 )
247
248	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'zw_3d', NF90_DOUBLE, &
249	id_dim_zw_3d(av), id_var_zw_3d(av) )
250	CALL handle_netcdf_error( 'netcdf', 71 )
251
252	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_zw_3d(av), 'units', &
253	'meters' )
254	CALL handle_netcdf_error( 'netcdf', 72 )
255
256	!
257	!-- Define x-axis (for scalar position)
258	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'x', nx+2, id_dim_x_3d(av) )
259	CALL handle_netcdf_error( 'netcdf', 73 )
260
261	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'x', NF90_DOUBLE, &
262	id_dim_x_3d(av), id_var_x_3d(av) )
263	CALL handle_netcdf_error( 'netcdf', 74 )
264
265	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_x_3d(av), 'units', &
266	'meters' )
267	CALL handle_netcdf_error( 'netcdf', 75 )
268
269	!
270	!-- Define x-axis (for u position)
271	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'xu', nx+2, id_dim_xu_3d(av) )
272	CALL handle_netcdf_error( 'netcdf', 358 )
273
274	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'xu', NF90_DOUBLE, &
275	id_dim_xu_3d(av), id_var_xu_3d(av) )
276	CALL handle_netcdf_error( 'netcdf', 359 )
277
278	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_xu_3d(av), 'units', &
279	'meters' )
280	CALL handle_netcdf_error( 'netcdf', 360 )
281
282	!
283	!-- Define y-axis (for scalar position)
284	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'y', ny+2, id_dim_y_3d(av) )
285	CALL handle_netcdf_error( 'netcdf', 76 )
286
287	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'y', NF90_DOUBLE, &
288	id_dim_y_3d(av), id_var_y_3d(av) )
289	CALL handle_netcdf_error( 'netcdf', 77 )
290
291	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_y_3d(av), 'units', &
292	'meters' )
293	CALL handle_netcdf_error( 'netcdf', 78 )
294
295	!
296	!-- Define y-axis (for v position)
297	nc_stat = NF90_DEF_DIM( id_set_3d(av), 'yv', ny+2, id_dim_yv_3d(av) )
298	CALL handle_netcdf_error( 'netcdf', 361 )
299
300	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'yv', NF90_DOUBLE, &
301	id_dim_yv_3d(av), id_var_yv_3d(av) )
302	CALL handle_netcdf_error( 'netcdf', 362 )
303
304	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_yv_3d(av), 'units', &
305	'meters' )
306	CALL handle_netcdf_error( 'netcdf', 363 )
307
308	!
309	!-- In case of non-flat topography define 2d-arrays containing the height
310	!-- informations
311	IF ( TRIM( topography ) /= 'flat' ) THEN
312	!
313	!-- Define zusi = zu(nzb_s_inner)
314	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'zusi', NF90_DOUBLE, &
315	(/ id_dim_x_3d(av), id_dim_y_3d(av) /), &
316	id_var_zusi_3d(av) )
317	CALL handle_netcdf_error( 'netcdf', 413 )
318
319	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_zusi_3d(av), &
320	'units', 'meters' )
321	CALL handle_netcdf_error( 'netcdf', 414 )
322
323	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_zusi_3d(av), &
324	'long_name', 'zu(nzb_s_inner)' )
325	CALL handle_netcdf_error( 'netcdf', 415 )
326
327	!
328	!-- Define zwwi = zw(nzb_w_inner)
329	nc_stat = NF90_DEF_VAR( id_set_3d(av), 'zwwi', NF90_DOUBLE, &
330	(/ id_dim_x_3d(av), id_dim_y_3d(av) /), &
331	id_var_zwwi_3d(av) )
332	CALL handle_netcdf_error( 'netcdf', 416 )
333
334	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_zwwi_3d(av), &
335	'units', 'meters' )
336	CALL handle_netcdf_error( 'netcdf', 417 )
337
338	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_zwwi_3d(av), &
339	'long_name', 'zw(nzb_w_inner)' )
340	CALL handle_netcdf_error( 'netcdf', 418 )
341
342	ENDIF
343
344
345	!
346	!-- Define the variables
347	var_list = ';'
348	i = 1
349
350	DO WHILE ( do3d(av,i)(1:1) /= ' ' )
351
352	!
353	!-- Check for the grid
354	found = .TRUE.
355	SELECT CASE ( do3d(av,i) )
356	!
357	!-- Most variables are defined on the scalar grid
358	CASE ( 'e', 'p', 'pc', 'pr', 'pt', 'q', 'ql', 'ql_c', 'ql_v', &
359	'ql_vp', 'qv', 'rho', 's', 'sa', 'vpt' )
360
361	grid_x = 'x'
362	grid_y = 'y'
363	grid_z = 'zu'
364	!
365	!-- u grid
366	CASE ( 'u' )
367
368	grid_x = 'xu'
369	grid_y = 'y'
370	grid_z = 'zu'
371	!
372	!-- v grid
373	CASE ( 'v' )
374
375	grid_x = 'x'
376	grid_y = 'yv'
377	grid_z = 'zu'
378	!
379	!-- w grid
380	CASE ( 'w' )
381
382	grid_x = 'x'
383	grid_y = 'y'
384	grid_z = 'zw'
385
386	CASE DEFAULT
387	!
388	!-- Check for user-defined quantities
389	CALL user_define_netcdf_grid( do3d(av,i), found, grid_x, &
390	grid_y, grid_z )
391
392	END SELECT
393
394	!
395	!-- Select the respective dimension ids
396	IF ( grid_x == 'x' ) THEN
397	id_x = id_dim_x_3d(av)
398	ELSEIF ( grid_x == 'xu' ) THEN
399	id_x = id_dim_xu_3d(av)
400	ENDIF
401
402	IF ( grid_y == 'y' ) THEN
403	id_y = id_dim_y_3d(av)
404	ELSEIF ( grid_y == 'yv' ) THEN
405	id_y = id_dim_yv_3d(av)
406	ENDIF
407
408	IF ( grid_z == 'zu' ) THEN
409	id_z = id_dim_zu_3d(av)
410	ELSEIF ( grid_z == 'zw' ) THEN
411	id_z = id_dim_zw_3d(av)
412	ENDIF
413
414	!
415	!-- Define the grid
416	nc_stat = NF90_DEF_VAR( id_set_3d(av), do3d(av,i), &
417	nc_precision(4), &
418	(/ id_x, id_y, id_z, id_dim_time_3d(av) /), &
419	id_var_do3d(av,i) )
420
421	IF ( .NOT. found ) THEN
422	WRITE ( message_string, * ) 'no grid defined for', &
423	' variable ', TRIM( do3d(av,i) )
424	CALL message( 'define_netcdf_header', 'PA0244', 0, 1, 0, 6, 0 )
425	ENDIF
426
427	var_list = TRIM( var_list ) // TRIM( do3d(av,i) ) // ';'
428
429	CALL handle_netcdf_error( 'netcdf', 79 )
430	!
431	!-- Store the 'real' name of the variable (with *, for example)
432	!-- in the long_name attribute. This is evaluated by Ferret,
433	!-- for example.
434	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_do3d(av,i), &
435	'long_name', do3d(av,i) )
436	CALL handle_netcdf_error( 'netcdf', 80 )
437	!
438	!-- Define the variable's unit
439	nc_stat = NF90_PUT_ATT( id_set_3d(av), id_var_do3d(av,i), &
440	'units', TRIM( do3d_unit(av,i) ) )
441	CALL handle_netcdf_error( 'netcdf', 357 )
442
443	i = i + 1
444
445	ENDDO
446
447	!
448	!-- No arrays to output
449	IF ( i == 1 ) RETURN
450
451	!
452	!-- Write the list of variables as global attribute (this is used by
453	!-- restart runs and by combine_plot_fields)
454	nc_stat = NF90_PUT_ATT( id_set_3d(av), NF90_GLOBAL, 'VAR_LIST', &
455	var_list )
456	CALL handle_netcdf_error( 'netcdf', 81 )
457
458	!
459	!-- Leave NetCDF define mode
460	nc_stat = NF90_ENDDEF( id_set_3d(av) )
461	CALL handle_netcdf_error( 'netcdf', 82 )
462
463	!
464	!-- Write data for x (shifted by +dx/2) and xu axis
465	ALLOCATE( netcdf_data(0:nx+1) )
466
467	DO i = 0, nx+1
468	netcdf_data(i) = ( i + 0.5 ) * dx
469	ENDDO
470
471	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_x_3d(av), netcdf_data, &
472	start = (/ 1 /), count = (/ nx+2 /) )
473	CALL handle_netcdf_error( 'netcdf', 83 )
474
475	DO i = 0, nx+1
476	netcdf_data(i) = i * dx
477	ENDDO
478
479	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_xu_3d(av), &
480	netcdf_data, start = (/ 1 /), &
481	count = (/ nx+2 /) )
482	CALL handle_netcdf_error( 'netcdf', 385 )
483
484	DEALLOCATE( netcdf_data )
485
486	!
487	!-- Write data for y (shifted by +dy/2) and yv axis
488	ALLOCATE( netcdf_data(0:ny+1) )
489
490	DO i = 0, ny+1
491	netcdf_data(i) = ( i + 0.5 ) * dy
492	ENDDO
493
494	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_y_3d(av), netcdf_data, &
495	start = (/ 1 /), count = (/ ny+2 /))
496	CALL handle_netcdf_error( 'netcdf', 84 )
497
498	DO i = 0, ny+1
499	netcdf_data(i) = i * dy
500	ENDDO
501
502	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_yv_3d(av), &
503	netcdf_data, start = (/ 1 /), &
504	count = (/ ny+2 /))
505	CALL handle_netcdf_error( 'netcdf', 387 )
506
507	DEALLOCATE( netcdf_data )
508
509	!
510	!-- Write zu and zw data (vertical axes)
511	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_zu_3d(av), &
512	zu(nzb:nz_do3d), start = (/ 1 /), &
513	count = (/ nz_do3d-nzb+1 /) )
514	CALL handle_netcdf_error( 'netcdf', 85 )
515
516
517	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_zw_3d(av), &
518	zw(nzb:nz_do3d), start = (/ 1 /), &
519	count = (/ nz_do3d-nzb+1 /) )
520	CALL handle_netcdf_error( 'netcdf', 86 )
521
522
523	!
524	!-- In case of non-flat topography write height information
525	IF ( TRIM( topography ) /= 'flat' ) THEN
526
527	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_zusi_3d(av), &
528	zu_s_inner(0:nx+1,0:ny+1), &
529	start = (/ 1, 1 /), &
530	count = (/ nx+2, ny+2 /) )
531	CALL handle_netcdf_error( 'netcdf', 419 )
532
533	nc_stat = NF90_PUT_VAR( id_set_3d(av), id_var_zwwi_3d(av), &
534	zw_w_inner(0:nx+1,0:ny+1), &
535	start = (/ 1, 1 /), &
536	count = (/ nx+2, ny+2 /) )
537	CALL handle_netcdf_error( 'netcdf', 420 )
538
539	ENDIF
540
541	CASE ( '3d_ext' )
542
543	!
544	!-- Get the list of variables and compare with the actual run.
545	!-- First var_list_old has to be reset, since GET_ATT does not assign
546	!-- trailing blanks.
547	var_list_old = ' '
548	nc_stat = NF90_GET_ATT( id_set_3d(av), NF90_GLOBAL, 'VAR_LIST', &
549	var_list_old )
550	CALL handle_netcdf_error( 'netcdf', 87 )
551
552	var_list = ';'
553	i = 1
554	DO WHILE ( do3d(av,i)(1:1) /= ' ' )
555	var_list = TRIM(var_list) // TRIM( do3d(av,i) ) // ';'
556	i = i + 1
557	ENDDO
558
559	IF ( av == 0 ) THEN
560	var = '(3d)'
561	ELSE
562	var = '(3d_av)'
563	ENDIF
564
565	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
566	message_string = 'NetCDF file for volume data ' // &
567	TRIM( var ) // ' from previous run found,' // &
568	'&but this file cannot be extended due to' // &
569	' variable mismatch.' // &
570	'&New file is created instead.'
571	CALL message( 'define_netcdf_header', 'PA0245', 0, 1, 0, 6, 0 )
572	extend = .FALSE.
573	RETURN
574	ENDIF
575
576	!
577	!-- Get and compare the number of vertical gridpoints
578	nc_stat = NF90_INQ_VARID( id_set_3d(av), 'zu_3d', id_var_zu_3d(av) )
579	CALL handle_netcdf_error( 'netcdf', 88 )
580
581	nc_stat = NF90_INQUIRE_VARIABLE( id_set_3d(av), id_var_zu_3d(av), &
582	dimids = id_dim_zu_3d_old )
583	CALL handle_netcdf_error( 'netcdf', 89 )
584	id_dim_zu_3d(av) = id_dim_zu_3d_old(1)
585
586	nc_stat = NF90_INQUIRE_DIMENSION( id_set_3d(av), id_dim_zu_3d(av), &
587	len = nz_old )
588	CALL handle_netcdf_error( 'netcdf', 90 )
589
590	IF ( nz_do3d-nzb+1 /= nz_old ) THEN
591	message_string = 'NetCDF file for volume data ' // &
592	TRIM( var ) // ' from previous run found,' // &
593	'&but this file cannot be extended due to' // &
594	' mismatch in number of' // &
595	'&vertical grid points (nz_do3d).' // &
596	'&New file is created instead.'
597	CALL message( 'define_netcdf_header', 'PA0246', 0, 1, 0, 6, 0 )
598	extend = .FALSE.
599	RETURN
600	ENDIF
601
602	!
603	!-- Get the id of the time coordinate (unlimited coordinate) and its
604	!-- last index on the file. The next time level is pl3d..count+1.
605	!-- The current time must be larger than the last output time
606	!-- on the file.
607	nc_stat = NF90_INQ_VARID( id_set_3d(av), 'time', id_var_time_3d(av) )
608	CALL handle_netcdf_error( 'netcdf', 91 )
609
610	nc_stat = NF90_INQUIRE_VARIABLE( id_set_3d(av), id_var_time_3d(av), &
611	dimids = id_dim_time_old )
612	CALL handle_netcdf_error( 'netcdf', 92 )
613
614	id_dim_time_3d(av) = id_dim_time_old(1)
615
616	nc_stat = NF90_INQUIRE_DIMENSION( id_set_3d(av), id_dim_time_3d(av), &
617	len = do3d_time_count(av) )
618	CALL handle_netcdf_error( 'netcdf', 93 )
619
620	nc_stat = NF90_GET_VAR( id_set_3d(av), id_var_time_3d(av), &
621	last_time_coordinate, &
622	start = (/ do3d_time_count(av) /), &
623	count = (/ 1 /) )
624	CALL handle_netcdf_error( 'netcdf', 94 )
625
626	IF ( last_time_coordinate(1) >= simulated_time ) THEN
627	message_string = 'NetCDF file for volume data ' // &
628	TRIM( var ) // ' from previous run found,' // &
629	'&but this file cannot be extended becaus' // &
630	'e the current output time' // &
631	'&is less or equal than the last output t' // &
632	'ime on this file.' // &
633	'&New file is created instead.'
634	CALL message( 'define_netcdf_header', 'PA0247', 0, 1, 0, 6, 0 )
635	do3d_time_count(av) = 0
636	extend = .FALSE.
637	RETURN
638	ENDIF
639
640	!
641	!-- Dataset seems to be extendable.
642	!-- Now get the variable ids.
643	i = 1
644	DO WHILE ( do3d(av,i)(1:1) /= ' ' )
645	nc_stat = NF90_INQ_VARID( id_set_3d(av), TRIM( do3d(av,i) ), &
646	id_var_do3d(av,i) )
647	CALL handle_netcdf_error( 'netcdf', 95 )
648	i = i + 1
649	ENDDO
650
651	!
652	!-- Change the title attribute on file
653	nc_stat = NF90_PUT_ATT( id_set_3d(av), NF90_GLOBAL, 'title', &
654	TRIM( run_description_header ) )
655	CALL handle_netcdf_error( 'netcdf', 96 )
656	message_string = 'NetCDF file for volume data ' // &
657	TRIM( var ) // ' from previous run found.' // &
658	'&This file will be extended.'
659	CALL message( 'define_netcdf_header', 'PA0248', 0, 0, 0, 6, 0 )
660
661	CASE ( 'xy_new' )
662
663	!
664	!-- Define some global attributes of the dataset
665	nc_stat = NF90_PUT_ATT( id_set_xy(av), NF90_GLOBAL, 'Conventions', &
666	'COARDS' )
667	CALL handle_netcdf_error( 'netcdf', 97 )
668
669	IF ( av == 0 ) THEN
670	time_average_text = ' '
671	ELSE
672	WRITE (time_average_text, '('', '',F7.1,'' s average'')') &
673	averaging_interval
674	ENDIF
675	nc_stat = NF90_PUT_ATT( id_set_xy(av), NF90_GLOBAL, 'title', &
676	TRIM( run_description_header ) // &
677	TRIM( time_average_text ) )
678	CALL handle_netcdf_error( 'netcdf', 98 )
679	IF ( av == 1 ) THEN
680	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval
681	nc_stat = NF90_PUT_ATT( id_set_xy(av), NF90_GLOBAL, 'time_avg', &
682	TRIM( time_average_text ) )
683	CALL handle_netcdf_error( 'netcdf', 98 )
684	ENDIF
685
686	!
687	!-- Define time coordinate for xy sections (unlimited dimension)
688	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'time', NF90_UNLIMITED, &
689	id_dim_time_xy(av) )
690	CALL handle_netcdf_error( 'netcdf', 99 )
691
692	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'time', NF90_DOUBLE, &
693	id_dim_time_xy(av), id_var_time_xy(av) )
694	CALL handle_netcdf_error( 'netcdf', 100 )
695
696	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_time_xy(av), 'units', &
697	'seconds')
698	CALL handle_netcdf_error( 'netcdf', 101 )
699
700	!
701	!-- Define the spatial dimensions and coordinates for xy-sections.
702	!-- First, determine the number of horizontal sections to be written.
703	IF ( section(1,1) == -9999 ) THEN
704	RETURN
705	ELSE
706	ns = 1
707	DO WHILE ( section(ns,1) /= -9999 .AND. ns <= 100 )
708	ns = ns + 1
709	ENDDO
710	ns = ns - 1
711	ENDIF
712
713	!
714	!-- Define vertical coordinate grid (zu grid)
715	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'zu_xy', ns, id_dim_zu_xy(av) )
716	CALL handle_netcdf_error( 'netcdf', 102 )
717
718	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'zu_xy', NF90_DOUBLE, &
719	id_dim_zu_xy(av), id_var_zu_xy(av) )
720	CALL handle_netcdf_error( 'netcdf', 103 )
721
722	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zu_xy(av), 'units', &
723	'meters' )
724	CALL handle_netcdf_error( 'netcdf', 104 )
725
726	!
727	!-- Define vertical coordinate grid (zw grid)
728	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'zw_xy', ns, id_dim_zw_xy(av) )
729	CALL handle_netcdf_error( 'netcdf', 105 )
730
731	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'zw_xy', NF90_DOUBLE, &
732	id_dim_zw_xy(av), id_var_zw_xy(av) )
733	CALL handle_netcdf_error( 'netcdf', 106 )
734
735	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zw_xy(av), 'units', &
736	'meters' )
737	CALL handle_netcdf_error( 'netcdf', 107 )
738
739	!
740	!-- Define a pseudo vertical coordinate grid for the surface variables
741	!-- u* and t* to store their height level
742	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'zu1_xy', 1, &
743	id_dim_zu1_xy(av) )
744	CALL handle_netcdf_error( 'netcdf', 108 )
745
746	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'zu1_xy', NF90_DOUBLE, &
747	id_dim_zu1_xy(av), id_var_zu1_xy(av) )
748	CALL handle_netcdf_error( 'netcdf', 109 )
749
750	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zu1_xy(av), 'units', &
751	'meters' )
752	CALL handle_netcdf_error( 'netcdf', 110 )
753
754	!
755	!-- Define a variable to store the layer indices of the horizontal cross
756	!-- sections, too
757	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'ind_z_xy', NF90_DOUBLE, &
758	id_dim_zu_xy(av), id_var_ind_z_xy(av) )
759	CALL handle_netcdf_error( 'netcdf', 111 )
760
761	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_ind_z_xy(av), 'units', &
762	'gridpoints')
763	CALL handle_netcdf_error( 'netcdf', 112 )
764
765	!
766	!-- Define x-axis (for scalar position)
767	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'x', nx+2, id_dim_x_xy(av) )
768	CALL handle_netcdf_error( 'netcdf', 113 )
769
770	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'x', NF90_DOUBLE, &
771	id_dim_x_xy(av), id_var_x_xy(av) )
772	CALL handle_netcdf_error( 'netcdf', 114 )
773
774
775	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_x_xy(av), 'units', &
776	'meters' )
777	CALL handle_netcdf_error( 'netcdf', 115 )
778
779	!
780	!-- Define x-axis (for u position)
781	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'xu', nx+2, id_dim_xu_xy(av) )
782	CALL handle_netcdf_error( 'netcdf', 388 )
783
784	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'xu', NF90_DOUBLE, &
785	id_dim_xu_xy(av), id_var_xu_xy(av) )
786	CALL handle_netcdf_error( 'netcdf', 389 )
787
788	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_xu_xy(av), 'units', &
789	'meters' )
790	CALL handle_netcdf_error( 'netcdf', 390 )
791
792	!
793	!-- Define y-axis (for scalar position)
794	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'y', ny+2, id_dim_y_xy(av) )
795	CALL handle_netcdf_error( 'netcdf', 116 )
796
797	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'y', NF90_DOUBLE, &
798	id_dim_y_xy(av), id_var_y_xy(av) )
799	CALL handle_netcdf_error( 'netcdf', 117 )
800
801	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_y_xy(av), 'units', &
802	'meters' )
803	CALL handle_netcdf_error( 'netcdf', 118 )
804
805	!
806	!-- Define y-axis (for scalar position)
807	nc_stat = NF90_DEF_DIM( id_set_xy(av), 'yv', ny+2, id_dim_yv_xy(av) )
808	CALL handle_netcdf_error( 'netcdf', 364 )
809
810	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'yv', NF90_DOUBLE, &
811	id_dim_yv_xy(av), id_var_yv_xy(av) )
812	CALL handle_netcdf_error( 'netcdf', 365 )
813
814	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_yv_xy(av), 'units', &
815	'meters' )
816	CALL handle_netcdf_error( 'netcdf', 366 )
817
818	!
819	!-- In case of non-flat topography define 2d-arrays containing the height
820	!-- informations
821	IF ( TRIM( topography ) /= 'flat' ) THEN
822	!
823	!-- Define zusi = zu(nzb_s_inner)
824	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'zusi', NF90_DOUBLE, &
825	(/ id_dim_x_xy(av), id_dim_y_xy(av) /), &
826	id_var_zusi_xy(av) )
827	CALL handle_netcdf_error( 'netcdf', 421 )
828
829	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zusi_xy(av), &
830	'units', 'meters' )
831	CALL handle_netcdf_error( 'netcdf', 422 )
832
833	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zusi_xy(av), &
834	'long_name', 'zu(nzb_s_inner)' )
835	CALL handle_netcdf_error( 'netcdf', 423 )
836
837	!
838	!-- Define zwwi = zw(nzb_w_inner)
839	nc_stat = NF90_DEF_VAR( id_set_xy(av), 'zwwi', NF90_DOUBLE, &
840	(/ id_dim_x_xy(av), id_dim_y_xy(av) /), &
841	id_var_zwwi_xy(av) )
842	CALL handle_netcdf_error( 'netcdf', 424 )
843
844	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zwwi_xy(av), &
845	'units', 'meters' )
846	CALL handle_netcdf_error( 'netcdf', 425 )
847
848	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_zwwi_xy(av), &
849	'long_name', 'zw(nzb_w_inner)' )
850	CALL handle_netcdf_error( 'netcdf', 426 )
851
852	ENDIF
853
854
855	!
856	!-- Define the variables
857	var_list = ';'
858	i = 1
859
860	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
861
862	IF ( INDEX( do2d(av,i), 'xy' ) /= 0 ) THEN
863	!
864	!-- If there is a star in the variable name (u* or t*), it is a
865	!-- surface variable. Define it with id_dim_zu1_xy.
866	IF ( INDEX( do2d(av,i), '*' ) /= 0 ) THEN
867	!
868	!-- First, remove those characters not allowed by NetCDF
869	netcdf_var_name = do2d(av,i)
870	CALL clean_netcdf_varname( netcdf_var_name )
871
872	nc_stat = NF90_DEF_VAR( id_set_xy(av), netcdf_var_name, &
873	nc_precision(1), &
874	(/ id_dim_x_xy(av), id_dim_y_xy(av),&
875	id_dim_zu1_xy(av), &
876	id_dim_time_xy(av) /), &
877	id_var_do2d(av,i) )
878
879	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
880
881	ELSE
882
883	!
884	!-- Check for the grid
885	found = .TRUE.
886	SELECT CASE ( do2d(av,i) )
887	!
888	!-- Most variables are defined on the zu grid
889	CASE ( 'e_xy', 'p_xy', 'pc_xy', 'pr_xy', 'pt_xy', 'q_xy',&
890	'ql_xy', 'ql_c_xy', 'ql_v_xy', 'ql_vp_xy', &
891	'qv_xy', 'rho_xy', 's_xy', 'sa_xy', 'vpt_xy' )
892
893	grid_x = 'x'
894	grid_y = 'y'
895	grid_z = 'zu'
896	!
897	!-- u grid
898	CASE ( 'u_xy' )
899
900	grid_x = 'xu'
901	grid_y = 'y'
902	grid_z = 'zu'
903	!
904	!-- v grid
905	CASE ( 'v_xy' )
906
907	grid_x = 'x'
908	grid_y = 'yv'
909	grid_z = 'zu'
910	!
911	!-- w grid
912	CASE ( 'w_xy' )
913
914	grid_x = 'x'
915	grid_y = 'y'
916	grid_z = 'zw'
917
918	CASE DEFAULT
919	!
920	!-- Check for user-defined quantities
921	CALL user_define_netcdf_grid( do2d(av,i), found, &
922	grid_x, grid_y, grid_z )
923
924	END SELECT
925
926	!
927	!-- Select the respective dimension ids
928	IF ( grid_x == 'x' ) THEN
929	id_x = id_dim_x_xy(av)
930	ELSEIF ( grid_x == 'xu' ) THEN
931	id_x = id_dim_xu_xy(av)
932	ENDIF
933
934	IF ( grid_y == 'y' ) THEN
935	id_y = id_dim_y_xy(av)
936	ELSEIF ( grid_y == 'yv' ) THEN
937	id_y = id_dim_yv_xy(av)
938	ENDIF
939
940	IF ( grid_z == 'zu' ) THEN
941	id_z = id_dim_zu_xy(av)
942	ELSEIF ( grid_z == 'zw' ) THEN
943	id_z = id_dim_zw_xy(av)
944	ENDIF
945
946	!
947	!-- Define the grid
948	nc_stat = NF90_DEF_VAR( id_set_xy(av), do2d(av,i), &
949	nc_precision(1), &
950	(/ id_x, id_y, id_z, id_dim_time_xy(av) /), &
951	id_var_do2d(av,i) )
952
953	IF ( .NOT. found ) THEN
954	WRITE ( message_string, * ) 'no grid defined for', &
955	' variable ', TRIM( do2d(av,i) )
956	CALL message( 'define_netcdf_header', 'PA0244',&
957	0, 1, 0, 6, 0 )
958	ENDIF
959
960	var_list = TRIM( var_list ) // TRIM( do2d(av,i) ) // ';'
961
962	ENDIF
963
964	CALL handle_netcdf_error( 'netcdf', 119 )
965	!
966	!-- Store the 'real' name of the variable (with *, for example)
967	!-- in the long_name attribute. This is evaluated by Ferret,
968	!-- for example.
969	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_do2d(av,i), &
970	'long_name', do2d(av,i) )
971	CALL handle_netcdf_error( 'netcdf', 120 )
972	!
973	!-- Define the variable's unit
974	nc_stat = NF90_PUT_ATT( id_set_xy(av), id_var_do2d(av,i), &
975	'units', TRIM( do2d_unit(av,i) ) )
976	CALL handle_netcdf_error( 'netcdf', 354 )
977	ENDIF
978
979	i = i + 1
980
981	ENDDO
982
983	!
984	!-- No arrays to output. Close the netcdf file and return.
985	IF ( i == 1 ) RETURN
986
987	!
988	!-- Write the list of variables as global attribute (this is used by
989	!-- restart runs and by combine_plot_fields)
990	nc_stat = NF90_PUT_ATT( id_set_xy(av), NF90_GLOBAL, 'VAR_LIST', &
991	var_list )
992	CALL handle_netcdf_error( 'netcdf', 121 )
993
994	!
995	!-- Leave NetCDF define mode
996	nc_stat = NF90_ENDDEF( id_set_xy(av) )
997	CALL handle_netcdf_error( 'netcdf', 122 )
998
999	!
1000	!-- Write axis data: z_xy, x, y
1001	ALLOCATE( netcdf_data(1:ns) )
1002
1003	!
1004	!-- Write zu data
1005	DO i = 1, ns
1006	IF( section(i,1) == -1 ) THEN
1007	netcdf_data(i) = -1.0 ! section averaged along z
1008	ELSE
1009	netcdf_data(i) = zu( section(i,1) )
1010	ENDIF
1011	ENDDO
1012	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_zu_xy(av), &
1013	netcdf_data, start = (/ 1 /), &
1014	count = (/ ns /) )
1015	CALL handle_netcdf_error( 'netcdf', 123 )
1016
1017	!
1018	!-- Write zw data
1019	DO i = 1, ns
1020	IF( section(i,1) == -1 ) THEN
1021	netcdf_data(i) = -1.0 ! section averaged along z
1022	ELSE
1023	netcdf_data(i) = zw( section(i,1) )
1024	ENDIF
1025	ENDDO
1026	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_zw_xy(av), &
1027	netcdf_data, start = (/ 1 /), &
1028	count = (/ ns /) )
1029	CALL handle_netcdf_error( 'netcdf', 124 )
1030
1031	!
1032	!-- Write gridpoint number data
1033	netcdf_data(1:ns) = section(1:ns,1)
1034	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_ind_z_xy(av), &
1035	netcdf_data, start = (/ 1 /), &
1036	count = (/ ns /) )
1037	CALL handle_netcdf_error( 'netcdf', 125 )
1038
1039	DEALLOCATE( netcdf_data )
1040
1041	!
1042	!-- Write the cross section height u, t
1043	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_zu1_xy(av), &
1044	(/ zu(nzb+1) /), start = (/ 1 /), &
1045	count = (/ 1 /) )
1046	CALL handle_netcdf_error( 'netcdf', 126 )
1047
1048	!
1049	!-- Write data for x (shifted by +dx/2) and xu axis
1050	ALLOCATE( netcdf_data(0:nx+1) )
1051
1052	DO i = 0, nx+1
1053	netcdf_data(i) = ( i + 0.5 ) * dx
1054	ENDDO
1055
1056	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_x_xy(av), netcdf_data, &
1057	start = (/ 1 /), count = (/ nx+2 /) )
1058	CALL handle_netcdf_error( 'netcdf', 127 )
1059
1060	DO i = 0, nx+1
1061	netcdf_data(i) = i * dx
1062	ENDDO
1063
1064	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_xu_xy(av), &
1065	netcdf_data, start = (/ 1 /), &
1066	count = (/ nx+2 /) )
1067	CALL handle_netcdf_error( 'netcdf', 367 )
1068
1069	DEALLOCATE( netcdf_data )
1070
1071	!
1072	!-- Write data for y (shifted by +dy/2) and yv axis
1073	ALLOCATE( netcdf_data(0:ny+1) )
1074
1075	DO i = 0, ny+1
1076	netcdf_data(i) = ( i + 0.5 ) * dy
1077	ENDDO
1078
1079	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_y_xy(av), netcdf_data, &
1080	start = (/ 1 /), count = (/ ny+2 /))
1081	CALL handle_netcdf_error( 'netcdf', 128 )
1082
1083	DO i = 0, ny+1
1084	netcdf_data(i) = i * dy
1085	ENDDO
1086
1087	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_yv_xy(av), &
1088	netcdf_data, start = (/ 1 /), &
1089	count = (/ ny+2 /))
1090	CALL handle_netcdf_error( 'netcdf', 368 )
1091
1092	DEALLOCATE( netcdf_data )
1093
1094	!
1095	!-- In case of non-flat topography write height information
1096	IF ( TRIM( topography ) /= 'flat' ) THEN
1097
1098	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_zusi_xy(av), &
1099	zu_s_inner(0:nx+1,0:ny+1), &
1100	start = (/ 1, 1 /), &
1101	count = (/ nx+2, ny+2 /) )
1102	CALL handle_netcdf_error( 'netcdf', 427 )
1103
1104	nc_stat = NF90_PUT_VAR( id_set_xy(av), id_var_zwwi_xy(av), &
1105	zw_w_inner(0:nx+1,0:ny+1), &
1106	start = (/ 1, 1 /), &
1107	count = (/ nx+2, ny+2 /) )
1108	CALL handle_netcdf_error( 'netcdf', 428 )
1109
1110	ENDIF
1111
1112
1113	CASE ( 'xy_ext' )
1114
1115	!
1116	!-- Get the list of variables and compare with the actual run.
1117	!-- First var_list_old has to be reset, since GET_ATT does not assign
1118	!-- trailing blanks.
1119	var_list_old = ' '
1120	nc_stat = NF90_GET_ATT( id_set_xy(av), NF90_GLOBAL, 'VAR_LIST', &
1121	var_list_old )
1122	CALL handle_netcdf_error( 'netcdf', 129 )
1123
1124	var_list = ';'
1125	i = 1
1126	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
1127	IF ( INDEX( do2d(av,i), 'xy' ) /= 0 ) THEN
1128	netcdf_var_name = do2d(av,i)
1129	CALL clean_netcdf_varname( netcdf_var_name )
1130	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
1131	ENDIF
1132	i = i + 1
1133	ENDDO
1134
1135	IF ( av == 0 ) THEN
1136	var = '(xy)'
1137	ELSE
1138	var = '(xy_av)'
1139	ENDIF
1140
1141	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
1142	message_string = 'NetCDF file for cross-sections ' // &
1143	TRIM( var ) // ' from previous run found,' // &
1144	'& but this file cannot be extended due to' // &
1145	' variable mismatch.' // &
1146	'&New file is created instead.'
1147	CALL message( 'define_netcdf_header', 'PA0249', 0, 1, 0, 6, 0 )
1148	extend = .FALSE.
1149	RETURN
1150	ENDIF
1151
1152	!
1153	!-- Calculate the number of current sections
1154	ns = 1
1155	DO WHILE ( section(ns,1) /= -9999 .AND. ns <= 100 )
1156	ns = ns + 1
1157	ENDDO
1158	ns = ns - 1
1159
1160	!
1161	!-- Get and compare the number of horizontal cross sections
1162	nc_stat = NF90_INQ_VARID( id_set_xy(av), 'zu_xy', id_var_zu_xy(av) )
1163	CALL handle_netcdf_error( 'netcdf', 130 )
1164
1165	nc_stat = NF90_INQUIRE_VARIABLE( id_set_xy(av), id_var_zu_xy(av), &
1166	dimids = id_dim_zu_xy_old )
1167	CALL handle_netcdf_error( 'netcdf', 131 )
1168	id_dim_zu_xy(av) = id_dim_zu_xy_old(1)
1169
1170	nc_stat = NF90_INQUIRE_DIMENSION( id_set_xy(av), id_dim_zu_xy(av), &
1171	len = ns_old )
1172	CALL handle_netcdf_error( 'netcdf', 132 )
1173
1174	IF ( ns /= ns_old ) THEN
1175	message_string = 'NetCDF file for cross-sections ' // &
1176	TRIM( var ) // ' from previous run found,' // &
1177	'&but this file cannot be extended due to' // &
1178	' mismatch in number of' // &
1179	'&cross sections.' // &
1180	'&New file is created instead.'
1181	CALL message( 'define_netcdf_header', 'PA0250', 0, 1, 0, 6, 0 )
1182	extend = .FALSE.
1183	RETURN
1184	ENDIF
1185
1186	!
1187	!-- Get and compare the heights of the cross sections
1188	ALLOCATE( netcdf_data(1:ns_old) )
1189
1190	nc_stat = NF90_GET_VAR( id_set_xy(av), id_var_zu_xy(av), netcdf_data )
1191	CALL handle_netcdf_error( 'netcdf', 133 )
1192
1193	DO i = 1, ns
1194	IF ( section(i,1) /= -1 ) THEN
1195	IF ( zu(section(i,1)) /= netcdf_data(i) ) THEN
1196	message_string = 'NetCDF file for cross-sections ' // &
1197	TRIM( var ) // ' from previous run found,' // &
1198	'&but this file cannot be extended' // &
1199	' due to mismatch in cross' // &
1200	'&section levels.' // &
1201	'&New file is created instead.'
1202	CALL message( 'define_netcdf_header', 'PA0251', &
1203	0, 1, 0, 6, 0 )
1204	extend = .FALSE.
1205	RETURN
1206	ENDIF
1207	ELSE
1208	IF ( -1.0 /= netcdf_data(i) ) THEN
1209	message_string = 'NetCDF file for cross-sections ' // &
1210	TRIM( var ) // ' from previous run found,' // &
1211	'&but this file cannot be extended' // &
1212	' due to mismatch in cross' // &
1213	'&section levels.' // &
1214	'&New file is created instead.'
1215	CALL message( 'define_netcdf_header', 'PA0251',&
1216	0, 1, 0, 6, 0 )
1217	extend = .FALSE.
1218	RETURN
1219	ENDIF
1220	ENDIF
1221	ENDDO
1222
1223	DEALLOCATE( netcdf_data )
1224
1225	!
1226	!-- Get the id of the time coordinate (unlimited coordinate) and its
1227	!-- last index on the file. The next time level is do2d..count+1.
1228	!-- The current time must be larger than the last output time
1229	!-- on the file.
1230	nc_stat = NF90_INQ_VARID( id_set_xy(av), 'time', id_var_time_xy(av) )
1231	CALL handle_netcdf_error( 'netcdf', 134 )
1232
1233	nc_stat = NF90_INQUIRE_VARIABLE( id_set_xy(av), id_var_time_xy(av), &
1234	dimids = id_dim_time_old )
1235	CALL handle_netcdf_error( 'netcdf', 135 )
1236	id_dim_time_xy(av) = id_dim_time_old(1)
1237
1238	nc_stat = NF90_INQUIRE_DIMENSION( id_set_xy(av), id_dim_time_xy(av), &
1239	len = do2d_xy_time_count(av) )
1240	CALL handle_netcdf_error( 'netcdf', 136 )
1241
1242	nc_stat = NF90_GET_VAR( id_set_xy(av), id_var_time_xy(av), &
1243	last_time_coordinate, &
1244	start = (/ do2d_xy_time_count(av) /), &
1245	count = (/ 1 /) )
1246	CALL handle_netcdf_error( 'netcdf', 137 )
1247
1248	IF ( last_time_coordinate(1) >= simulated_time ) THEN
1249	message_string = 'NetCDF file for cross sections ' // &
1250	TRIM( var ) // ' from previous run found,' // &
1251	'&but this file cannot be extended becaus' // &
1252	'e the current output time' // &
1253	'&is less or equal than the last output t' // &
1254	'ime on this file.' // &
1255	'&New file is created instead.'
1256	CALL message( 'define_netcdf_header', 'PA0252', 0, 1, 0, 6, 0 )
1257	do2d_xy_time_count(av) = 0
1258	extend = .FALSE.
1259	RETURN
1260	ENDIF
1261
1262	!
1263	!-- Dataset seems to be extendable.
1264	!-- Now get the variable ids.
1265	i = 1
1266	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
1267	IF ( INDEX( do2d(av,i), 'xy' ) /= 0 ) THEN
1268	netcdf_var_name = do2d(av,i)
1269	CALL clean_netcdf_varname( netcdf_var_name )
1270	nc_stat = NF90_INQ_VARID( id_set_xy(av), netcdf_var_name, &
1271	id_var_do2d(av,i) )
1272	CALL handle_netcdf_error( 'netcdf', 138 )
1273	ENDIF
1274	i = i + 1
1275	ENDDO
1276
1277	!
1278	!-- Change the title attribute on file
1279	nc_stat = NF90_PUT_ATT( id_set_xy(av), NF90_GLOBAL, 'title', &
1280	TRIM( run_description_header ) )
1281	CALL handle_netcdf_error( 'netcdf', 139 )
1282	message_string = 'NetCDF file for cross-sections ' // &
1283	TRIM( var ) // ' from previous run found.' // &
1284	'&This file will be extended.'
1285	CALL message( 'define_netcdf_header', 'PA0253', 0, 0, 0, 6, 0 )
1286
1287
1288	CASE ( 'xz_new' )
1289
1290	!
1291	!-- Define some global attributes of the dataset
1292	nc_stat = NF90_PUT_ATT( id_set_xz(av), NF90_GLOBAL, 'Conventions', &
1293	'COARDS' )
1294	CALL handle_netcdf_error( 'netcdf', 140 )
1295
1296	IF ( av == 0 ) THEN
1297	time_average_text = ' '
1298	ELSE
1299	WRITE (time_average_text, '('', '',F7.1,'' s average'')') &
1300	averaging_interval
1301	ENDIF
1302	nc_stat = NF90_PUT_ATT( id_set_xz(av), NF90_GLOBAL, 'title', &
1303	TRIM( run_description_header ) // &
1304	TRIM( time_average_text ) )
1305	CALL handle_netcdf_error( 'netcdf', 141 )
1306	IF ( av == 1 ) THEN
1307	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval
1308	nc_stat = NF90_PUT_ATT( id_set_xz(av), NF90_GLOBAL, 'time_avg', &
1309	TRIM( time_average_text ) )
1310	CALL handle_netcdf_error( 'netcdf', 141 )
1311	ENDIF
1312
1313	!
1314	!-- Define time coordinate for xz sections (unlimited dimension)
1315	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'time', NF90_UNLIMITED, &
1316	id_dim_time_xz(av) )
1317	CALL handle_netcdf_error( 'netcdf', 142 )
1318
1319	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'time', NF90_DOUBLE, &
1320	id_dim_time_xz(av), id_var_time_xz(av) )
1321	CALL handle_netcdf_error( 'netcdf', 143 )
1322
1323	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_time_xz(av), 'units', &
1324	'seconds')
1325	CALL handle_netcdf_error( 'netcdf', 144 )
1326
1327	!
1328	!-- Define the spatial dimensions and coordinates for xz-sections.
1329	!-- First, determine the number of vertical sections to be written.
1330	IF ( section(1,2) == -9999 ) THEN
1331	RETURN
1332	ELSE
1333	ns = 1
1334	DO WHILE ( section(ns,2) /= -9999 .AND. ns <= 100 )
1335	ns = ns + 1
1336	ENDDO
1337	ns = ns - 1
1338	ENDIF
1339
1340	!
1341	!-- Define y-axis (for scalar position)
1342	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'y_xz', ns, id_dim_y_xz(av) )
1343	CALL handle_netcdf_error( 'netcdf', 145 )
1344
1345	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'y_xz', NF90_DOUBLE, &
1346	id_dim_y_xz(av), id_var_y_xz(av) )
1347	CALL handle_netcdf_error( 'netcdf', 146 )
1348
1349	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_y_xz(av), 'units', &
1350	'meters' )
1351	CALL handle_netcdf_error( 'netcdf', 147 )
1352
1353	!
1354	!-- Define y-axis (for v position)
1355	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'yv_xz', ns, id_dim_yv_xz(av) )
1356	CALL handle_netcdf_error( 'netcdf', 369 )
1357
1358	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'yv_xz', NF90_DOUBLE, &
1359	id_dim_yv_xz(av), id_var_yv_xz(av) )
1360	CALL handle_netcdf_error( 'netcdf', 370 )
1361
1362	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_yv_xz(av), 'units', &
1363	'meters' )
1364	CALL handle_netcdf_error( 'netcdf', 371 )
1365
1366	!
1367	!-- Define a variable to store the layer indices of the vertical cross
1368	!-- sections
1369	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'ind_y_xz', NF90_DOUBLE, &
1370	id_dim_y_xz(av), id_var_ind_y_xz(av) )
1371	CALL handle_netcdf_error( 'netcdf', 148 )
1372
1373	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_ind_y_xz(av), 'units', &
1374	'gridpoints')
1375	CALL handle_netcdf_error( 'netcdf', 149 )
1376
1377	!
1378	!-- Define x-axis (for scalar position)
1379	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'x', nx+2, id_dim_x_xz(av) )
1380	CALL handle_netcdf_error( 'netcdf', 150 )
1381
1382	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'x', NF90_DOUBLE, &
1383	id_dim_x_xz(av), id_var_x_xz(av) )
1384	CALL handle_netcdf_error( 'netcdf', 151 )
1385
1386	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_x_xz(av), 'units', &
1387	'meters' )
1388	CALL handle_netcdf_error( 'netcdf', 152 )
1389
1390	!
1391	!-- Define x-axis (for u position)
1392	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'xu', nx+2, id_dim_xu_xz(av) )
1393	CALL handle_netcdf_error( 'netcdf', 372 )
1394
1395	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'xu', NF90_DOUBLE, &
1396	id_dim_xu_xz(av), id_var_xu_xz(av) )
1397	CALL handle_netcdf_error( 'netcdf', 373 )
1398
1399	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_xu_xz(av), 'units', &
1400	'meters' )
1401	CALL handle_netcdf_error( 'netcdf', 374 )
1402
1403	!
1404	!-- Define the two z-axes (zu and zw)
1405	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'zu', nz+2, id_dim_zu_xz(av) )
1406	CALL handle_netcdf_error( 'netcdf', 153 )
1407
1408	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'zu', NF90_DOUBLE, &
1409	id_dim_zu_xz(av), id_var_zu_xz(av) )
1410	CALL handle_netcdf_error( 'netcdf', 154 )
1411
1412	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_zu_xz(av), 'units', &
1413	'meters' )
1414	CALL handle_netcdf_error( 'netcdf', 155 )
1415
1416	nc_stat = NF90_DEF_DIM( id_set_xz(av), 'zw', nz+2, id_dim_zw_xz(av) )
1417	CALL handle_netcdf_error( 'netcdf', 156 )
1418
1419	nc_stat = NF90_DEF_VAR( id_set_xz(av), 'zw', NF90_DOUBLE, &
1420	id_dim_zw_xz(av), id_var_zw_xz(av) )
1421	CALL handle_netcdf_error( 'netcdf', 157 )
1422
1423	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_zw_xz(av), 'units', &
1424	'meters' )
1425	CALL handle_netcdf_error( 'netcdf', 158 )
1426
1427
1428	!
1429	!-- Define the variables
1430	var_list = ';'
1431	i = 1
1432
1433	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
1434
1435	IF ( INDEX( do2d(av,i), 'xz' ) /= 0 ) THEN
1436
1437	!
1438	!-- Check for the grid
1439	found = .TRUE.
1440	SELECT CASE ( do2d(av,i) )
1441	!
1442	!-- Most variables are defined on the zu grid
1443	CASE ( 'e_xz', 'p_xz', 'pc_xz', 'pr_xz', 'pt_xz', 'q_xz', &
1444	'ql_xz', 'ql_c_xz', 'ql_v_xz', 'ql_vp_xz', 'qv_xz', &
1445	'rho_xz', 's_xz', 'sa_xz', 'vpt_xz' )
1446
1447	grid_x = 'x'
1448	grid_y = 'y'
1449	grid_z = 'zu'
1450	!
1451	!-- u grid
1452	CASE ( 'u_xz' )
1453
1454	grid_x = 'xu'
1455	grid_y = 'y'
1456	grid_z = 'zu'
1457	!
1458	!-- v grid
1459	CASE ( 'v_xz' )
1460
1461	grid_x = 'x'
1462	grid_y = 'yv'
1463	grid_z = 'zu'
1464	!
1465	!-- w grid
1466	CASE ( 'w_xz' )
1467
1468	grid_x = 'x'
1469	grid_y = 'y'
1470	grid_z = 'zw'
1471
1472	CASE DEFAULT
1473	!
1474	!-- Check for user-defined quantities
1475	CALL user_define_netcdf_grid( do2d(av,i), found, &
1476	grid_x, grid_y, grid_z )
1477
1478	END SELECT
1479
1480	!
1481	!-- Select the respective dimension ids
1482	IF ( grid_x == 'x' ) THEN
1483	id_x = id_dim_x_xz(av)
1484	ELSEIF ( grid_x == 'xu' ) THEN
1485	id_x = id_dim_xu_xz(av)
1486	ENDIF
1487
1488	IF ( grid_y == 'y' ) THEN
1489	id_y = id_dim_y_xz(av)
1490	ELSEIF ( grid_y == 'yv' ) THEN
1491	id_y = id_dim_yv_xz(av)
1492	ENDIF
1493
1494	IF ( grid_z == 'zu' ) THEN
1495	id_z = id_dim_zu_xz(av)
1496	ELSEIF ( grid_z == 'zw' ) THEN
1497	id_z = id_dim_zw_xz(av)
1498	ENDIF
1499
1500	!
1501	!-- Define the grid
1502	nc_stat = NF90_DEF_VAR( id_set_xz(av), do2d(av,i), &
1503	nc_precision(2), &
1504	(/ id_x, id_y, id_z, id_dim_time_xz(av) /), &
1505	id_var_do2d(av,i) )
1506
1507	IF ( .NOT. found ) THEN
1508	WRITE ( message_string, * ) 'no grid defined for', &
1509	' variable ', TRIM( do2d(av,i) )
1510	CALL message( 'define_netcdf_header', 'PA0244',&
1511	0, 1, 0, 6, 0 )
1512	ENDIF
1513
1514	var_list = TRIM( var_list ) // TRIM( do2d(av,i) ) // ';'
1515
1516	CALL handle_netcdf_error( 'netcdf', 159 )
1517	!
1518	!-- Store the 'real' name of the variable (with *, for example)
1519	!-- in the long_name attribute. This is evaluated by Ferret,
1520	!-- for example.
1521	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_do2d(av,i), &
1522	'long_name', do2d(av,i) )
1523	CALL handle_netcdf_error( 'netcdf', 160 )
1524	!
1525	!-- Define the variable's unit
1526	nc_stat = NF90_PUT_ATT( id_set_xz(av), id_var_do2d(av,i), &
1527	'units', TRIM( do2d_unit(av,i) ) )
1528	CALL handle_netcdf_error( 'netcdf', 355 )
1529	ENDIF
1530
1531	i = i + 1
1532
1533	ENDDO
1534
1535	!
1536	!-- No arrays to output. Close the netcdf file and return.
1537	IF ( i == 1 ) RETURN
1538
1539	!
1540	!-- Write the list of variables as global attribute (this is used by
1541	!-- restart runs and by combine_plot_fields)
1542	nc_stat = NF90_PUT_ATT( id_set_xz(av), NF90_GLOBAL, 'VAR_LIST', &
1543	var_list )
1544	CALL handle_netcdf_error( 'netcdf', 161 )
1545
1546	!
1547	!-- Leave NetCDF define mode
1548	nc_stat = NF90_ENDDEF( id_set_xz(av) )
1549	CALL handle_netcdf_error( 'netcdf', 162 )
1550
1551	!
1552	!-- Write axis data: y_xz, x, zu, zw
1553	ALLOCATE( netcdf_data(1:ns) )
1554
1555	!
1556	!-- Write y_xz data (shifted by +dy/2)
1557	DO i = 1, ns
1558	IF( section(i,2) == -1 ) THEN
1559	netcdf_data(i) = -1.0 ! section averaged along y
1560	ELSE
1561	netcdf_data(i) = ( section(i,2) + 0.5 ) * dy
1562	ENDIF
1563	ENDDO
1564	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_y_xz(av), netcdf_data, &
1565	start = (/ 1 /), count = (/ ns /) )
1566	CALL handle_netcdf_error( 'netcdf', 163 )
1567
1568	!
1569	!-- Write yv_xz data
1570	DO i = 1, ns
1571	IF( section(i,2) == -1 ) THEN
1572	netcdf_data(i) = -1.0 ! section averaged along y
1573	ELSE
1574	netcdf_data(i) = section(i,2) * dy
1575	ENDIF
1576	ENDDO
1577	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_yv_xz(av), &
1578	netcdf_data, start = (/ 1 /), &
1579	count = (/ ns /) )
1580	CALL handle_netcdf_error( 'netcdf', 375 )
1581
1582	!
1583	!-- Write gridpoint number data
1584	netcdf_data(1:ns) = section(1:ns,2)
1585	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_ind_y_xz(av), &
1586	netcdf_data, start = (/ 1 /), &
1587	count = (/ ns /) )
1588	CALL handle_netcdf_error( 'netcdf', 164 )
1589
1590
1591	DEALLOCATE( netcdf_data )
1592
1593	!
1594	!-- Write data for x (shifted by +dx/2) and xu axis
1595	ALLOCATE( netcdf_data(0:nx+1) )
1596
1597	DO i = 0, nx+1
1598	netcdf_data(i) = ( i + 0.5 ) * dx
1599	ENDDO
1600
1601	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_x_xz(av), netcdf_data, &
1602	start = (/ 1 /), count = (/ nx+2 /) )
1603	CALL handle_netcdf_error( 'netcdf', 165 )
1604
1605	DO i = 0, nx+1
1606	netcdf_data(i) = i * dx
1607	ENDDO
1608
1609	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_xu_xz(av), &
1610	netcdf_data, start = (/ 1 /), &
1611	count = (/ nx+2 /) )
1612	CALL handle_netcdf_error( 'netcdf', 377 )
1613
1614	DEALLOCATE( netcdf_data )
1615
1616	!
1617	!-- Write zu and zw data (vertical axes)
1618	ALLOCATE( netcdf_data(0:nz+1) )
1619
1620	netcdf_data(0:nz+1) = zu(nzb:nzt+1)
1621	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_zu_xz(av), &
1622	netcdf_data, start = (/ 1 /), &
1623	count = (/ nz+2 /) )
1624	CALL handle_netcdf_error( 'netcdf', 166 )
1625
1626	netcdf_data(0:nz+1) = zw(nzb:nzt+1)
1627	nc_stat = NF90_PUT_VAR( id_set_xz(av), id_var_zw_xz(av), &
1628	netcdf_data, start = (/ 1 /), &
1629	count = (/ nz+2 /) )
1630	CALL handle_netcdf_error( 'netcdf', 167 )
1631
1632	DEALLOCATE( netcdf_data )
1633
1634
1635	CASE ( 'xz_ext' )
1636
1637	!
1638	!-- Get the list of variables and compare with the actual run.
1639	!-- First var_list_old has to be reset, since GET_ATT does not assign
1640	!-- trailing blanks.
1641	var_list_old = ' '
1642	nc_stat = NF90_GET_ATT( id_set_xz(av), NF90_GLOBAL, 'VAR_LIST', &
1643	var_list_old )
1644	CALL handle_netcdf_error( 'netcdf', 168 )
1645
1646	var_list = ';'
1647	i = 1
1648	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
1649	IF ( INDEX( do2d(av,i), 'xz' ) /= 0 ) THEN
1650	netcdf_var_name = do2d(av,i)
1651	CALL clean_netcdf_varname( netcdf_var_name )
1652	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
1653	ENDIF
1654	i = i + 1
1655	ENDDO
1656
1657	IF ( av == 0 ) THEN
1658	var = '(xz)'
1659	ELSE
1660	var = '(xz_av)'
1661	ENDIF
1662
1663	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
1664	message_string = 'NetCDF file for cross-sections ' // &
1665	TRIM( var ) // ' from previous run found,' // &
1666	'& but this file cannot be extended due to' // &
1667	' variable mismatch.' // &
1668	'&New file is created instead.'
1669	CALL message( 'define_netcdf_header', 'PA0249', 0, 1, 0, 6, 0 )
1670	extend = .FALSE.
1671	RETURN
1672	ENDIF
1673
1674	!
1675	!-- Calculate the number of current sections
1676	ns = 1
1677	DO WHILE ( section(ns,2) /= -9999 .AND. ns <= 100 )
1678	ns = ns + 1
1679	ENDDO
1680	ns = ns - 1
1681
1682	!
1683	!-- Get and compare the number of vertical cross sections
1684	nc_stat = NF90_INQ_VARID( id_set_xz(av), 'y_xz', id_var_y_xz(av) )
1685	CALL handle_netcdf_error( 'netcdf', 169 )
1686
1687	nc_stat = NF90_INQUIRE_VARIABLE( id_set_xz(av), id_var_y_xz(av), &
1688	dimids = id_dim_y_xz_old )
1689	CALL handle_netcdf_error( 'netcdf', 170 )
1690	id_dim_y_xz(av) = id_dim_y_xz_old(1)
1691
1692	nc_stat = NF90_INQUIRE_DIMENSION( id_set_xz(av), id_dim_y_xz(av), &
1693	len = ns_old )
1694	CALL handle_netcdf_error( 'netcdf', 171 )
1695
1696	IF ( ns /= ns_old ) THEN
1697	message_string = 'NetCDF file for cross-sections ' // &
1698	TRIM( var ) // ' from previous run found,' // &
1699	'&but this file cannot be extended due to' // &
1700	' mismatch in number of' // &
1701	'&cross sections.' // &
1702	'&New file is created instead.'
1703	CALL message( 'define_netcdf_header', 'PA0250', 0, 1, 0, 6, 0 )
1704	extend = .FALSE.
1705	RETURN
1706	ENDIF
1707
1708	!
1709	!-- Get and compare the heights of the cross sections
1710	ALLOCATE( netcdf_data(1:ns_old) )
1711
1712	nc_stat = NF90_GET_VAR( id_set_xz(av), id_var_y_xz(av), netcdf_data )
1713	CALL handle_netcdf_error( 'netcdf', 172 )
1714
1715	DO i = 1, ns
1716	IF ( section(i,2) /= -1 ) THEN
1717	IF ( ( section(i,2) * dy ) /= netcdf_data(i) ) THEN
1718	message_string = 'NetCDF file for cross-sections ' // &
1719	TRIM( var ) // ' from previous run found,' // &
1720	'&but this file cannot be extended' // &
1721	' due to mismatch in cross' // &
1722	'&section levels.' // &
1723	'&New file is created instead.'
1724	CALL message( 'define_netcdf_header', 'PA0251', &
1725	0, 1, 0, 6, 0 )
1726	extend = .FALSE.
1727	RETURN
1728	ENDIF
1729	ELSE
1730	IF ( -1.0 /= netcdf_data(i) ) THEN
1731	message_string = 'NetCDF file for cross-sections ' // &
1732	TRIM( var ) // ' from previous run found,' // &
1733	'&but this file cannot be extended' // &
1734	' due to mismatch in cross' // &
1735	'&section levels.' // &
1736	'&New file is created instead.'
1737	CALL message( 'define_netcdf_header', 'PA0251', &
1738	0, 1, 0, 6, 0 )
1739	extend = .FALSE.
1740	RETURN
1741	ENDIF
1742	ENDIF
1743	ENDDO
1744
1745	DEALLOCATE( netcdf_data )
1746
1747	!
1748	!-- Get the id of the time coordinate (unlimited coordinate) and its
1749	!-- last index on the file. The next time level is do2d..count+1.
1750	!-- The current time must be larger than the last output time
1751	!-- on the file.
1752	nc_stat = NF90_INQ_VARID( id_set_xz(av), 'time', id_var_time_xz(av) )
1753	CALL handle_netcdf_error( 'netcdf', 173 )
1754
1755	nc_stat = NF90_INQUIRE_VARIABLE( id_set_xz(av), id_var_time_xz(av), &
1756	dimids = id_dim_time_old )
1757	CALL handle_netcdf_error( 'netcdf', 174 )
1758	id_dim_time_xz(av) = id_dim_time_old(1)
1759
1760	nc_stat = NF90_INQUIRE_DIMENSION( id_set_xz(av), id_dim_time_xz(av), &
1761	len = do2d_xz_time_count(av) )
1762	CALL handle_netcdf_error( 'netcdf', 175 )
1763
1764	nc_stat = NF90_GET_VAR( id_set_xz(av), id_var_time_xz(av), &
1765	last_time_coordinate, &
1766	start = (/ do2d_xz_time_count(av) /), &
1767	count = (/ 1 /) )
1768	CALL handle_netcdf_error( 'netcdf', 176 )
1769
1770	IF ( last_time_coordinate(1) >= simulated_time ) THEN
1771	message_string = 'NetCDF file for cross sections ' // &
1772	TRIM( var ) // ' from previous run found,' // &
1773	'&but this file cannot be extended becaus' // &
1774	'e the current output time' // &
1775	'&is less or equal than the last output t' // &
1776	'ime on this file.' // &
1777	'&New file is created instead.'
1778	CALL message( 'define_netcdf_header', 'PA0252', 0, 1, 0, 6, 0 )
1779	do2d_xz_time_count(av) = 0
1780	extend = .FALSE.
1781	RETURN
1782	ENDIF
1783
1784	!
1785	!-- Dataset seems to be extendable.
1786	!-- Now get the variable ids.
1787	i = 1
1788	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
1789	IF ( INDEX( do2d(av,i), 'xz' ) /= 0 ) THEN
1790	netcdf_var_name = do2d(av,i)
1791	CALL clean_netcdf_varname( netcdf_var_name )
1792	nc_stat = NF90_INQ_VARID( id_set_xz(av), netcdf_var_name, &
1793	id_var_do2d(av,i) )
1794	CALL handle_netcdf_error( 'netcdf', 177 )
1795	ENDIF
1796	i = i + 1
1797	ENDDO
1798
1799	!
1800	!-- Change the title attribute on file
1801	nc_stat = NF90_PUT_ATT( id_set_xz(av), NF90_GLOBAL, 'title', &
1802	TRIM( run_description_header ) )
1803	CALL handle_netcdf_error( 'netcdf', 178 )
1804	message_string = 'NetCDF file for cross-sections ' // &
1805	TRIM( var ) // ' from previous run found.' // &
1806	'&This file will be extended.'
1807	CALL message( 'define_netcdf_header', 'PA0253', 0, 0, 0, 6, 0 )
1808
1809
1810	CASE ( 'yz_new' )
1811
1812	!
1813	!-- Define some global attributes of the dataset
1814	nc_stat = NF90_PUT_ATT( id_set_yz(av), NF90_GLOBAL, 'Conventions', &
1815	'COARDS' )
1816	CALL handle_netcdf_error( 'netcdf', 179 )
1817
1818	IF ( av == 0 ) THEN
1819	time_average_text = ' '
1820	ELSE
1821	WRITE (time_average_text, '('', '',F7.1,'' s average'')') &
1822	averaging_interval
1823	ENDIF
1824	nc_stat = NF90_PUT_ATT( id_set_yz(av), NF90_GLOBAL, 'title', &
1825	TRIM( run_description_header ) // &
1826	TRIM( time_average_text ) )
1827	CALL handle_netcdf_error( 'netcdf', 180 )
1828	IF ( av == 1 ) THEN
1829	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval
1830	nc_stat = NF90_PUT_ATT( id_set_yz(av), NF90_GLOBAL, 'time_avg', &
1831	TRIM( time_average_text ) )
1832	CALL handle_netcdf_error( 'netcdf', 180 )
1833	ENDIF
1834
1835	!
1836	!-- Define time coordinate for yz sections (unlimited dimension)
1837	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'time', NF90_UNLIMITED, &
1838	id_dim_time_yz(av) )
1839	CALL handle_netcdf_error( 'netcdf', 181 )
1840
1841	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'time', NF90_DOUBLE, &
1842	id_dim_time_yz(av), id_var_time_yz(av) )
1843	CALL handle_netcdf_error( 'netcdf', 182 )
1844
1845	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_time_yz(av), 'units', &
1846	'seconds')
1847	CALL handle_netcdf_error( 'netcdf', 183 )
1848
1849	!
1850	!-- Define the spatial dimensions and coordinates for yz-sections.
1851	!-- First, determine the number of vertical sections to be written.
1852	IF ( section(1,3) == -9999 ) THEN
1853	RETURN
1854	ELSE
1855	ns = 1
1856	DO WHILE ( section(ns,3) /= -9999 .AND. ns <= 100 )
1857	ns = ns + 1
1858	ENDDO
1859	ns = ns - 1
1860	ENDIF
1861
1862	!
1863	!-- Define x axis (for scalar position)
1864	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'x_yz', ns, id_dim_x_yz(av) )
1865	CALL handle_netcdf_error( 'netcdf', 184 )
1866
1867	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'x_yz', NF90_DOUBLE, &
1868	id_dim_x_yz(av), id_var_x_yz(av) )
1869	CALL handle_netcdf_error( 'netcdf', 185 )
1870
1871	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_x_yz(av), 'units', &
1872	'meters' )
1873	CALL handle_netcdf_error( 'netcdf', 186 )
1874
1875	!
1876	!-- Define x axis (for u position)
1877	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'xu_yz', ns, id_dim_xu_yz(av) )
1878	CALL handle_netcdf_error( 'netcdf', 377 )
1879
1880	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'xu_yz', NF90_DOUBLE, &
1881	id_dim_xu_yz(av), id_var_xu_yz(av) )
1882	CALL handle_netcdf_error( 'netcdf', 378 )
1883
1884	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_xu_yz(av), 'units', &
1885	'meters' )
1886	CALL handle_netcdf_error( 'netcdf', 379 )
1887
1888	!
1889	!-- Define a variable to store the layer indices of the vertical cross
1890	!-- sections
1891	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'ind_x_yz', NF90_DOUBLE, &
1892	id_dim_x_yz(av), id_var_ind_x_yz(av) )
1893	CALL handle_netcdf_error( 'netcdf', 187 )
1894
1895	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_ind_x_yz(av), 'units', &
1896	'gridpoints')
1897	CALL handle_netcdf_error( 'netcdf', 188 )
1898
1899	!
1900	!-- Define y-axis (for scalar position)
1901	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'y', ny+2, id_dim_y_yz(av) )
1902	CALL handle_netcdf_error( 'netcdf', 189 )
1903
1904	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'y', NF90_DOUBLE, &
1905	id_dim_y_yz(av), id_var_y_yz(av) )
1906	CALL handle_netcdf_error( 'netcdf', 190 )
1907
1908	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_y_yz(av), 'units', &
1909	'meters' )
1910	CALL handle_netcdf_error( 'netcdf', 191 )
1911
1912	!
1913	!-- Define y-axis (for v position)
1914	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'yv', ny+2, id_dim_yv_yz(av) )
1915	CALL handle_netcdf_error( 'netcdf', 380 )
1916
1917	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'yv', NF90_DOUBLE, &
1918	id_dim_yv_yz(av), id_var_yv_yz(av) )
1919	CALL handle_netcdf_error( 'netcdf', 381 )
1920
1921	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_yv_yz(av), 'units', &
1922	'meters' )
1923	CALL handle_netcdf_error( 'netcdf', 382 )
1924
1925	!
1926	!-- Define the two z-axes (zu and zw)
1927	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'zu', nz+2, id_dim_zu_yz(av) )
1928	CALL handle_netcdf_error( 'netcdf', 192 )
1929
1930	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'zu', NF90_DOUBLE, &
1931	id_dim_zu_yz(av), id_var_zu_yz(av) )
1932	CALL handle_netcdf_error( 'netcdf', 193 )
1933
1934	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_zu_yz(av), 'units', &
1935	'meters' )
1936	CALL handle_netcdf_error( 'netcdf', 194 )
1937
1938	nc_stat = NF90_DEF_DIM( id_set_yz(av), 'zw', nz+2, id_dim_zw_yz(av) )
1939	CALL handle_netcdf_error( 'netcdf', 195 )
1940
1941	nc_stat = NF90_DEF_VAR( id_set_yz(av), 'zw', NF90_DOUBLE, &
1942	id_dim_zw_yz(av), id_var_zw_yz(av) )
1943	CALL handle_netcdf_error( 'netcdf', 196 )
1944
1945	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_zw_yz(av), 'units', &
1946	'meters' )
1947	CALL handle_netcdf_error( 'netcdf', 197 )
1948
1949
1950	!
1951	!-- Define the variables
1952	var_list = ';'
1953	i = 1
1954
1955	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
1956
1957	IF ( INDEX( do2d(av,i), 'yz' ) /= 0 ) THEN
1958
1959	!
1960	!-- Check for the grid
1961	found = .TRUE.
1962	SELECT CASE ( do2d(av,i) )
1963	!
1964	!-- Most variables are defined on the zu grid
1965	CASE ( 'e_yz', 'p_yz', 'pc_yz', 'pr_yz', 'pt_yz', 'q_yz', &
1966	'ql_yz', 'ql_c_yz', 'ql_v_yz', 'ql_vp_yz', 'qv_yz', &
1967	'rho_yz', 's_yz', 'sa_yz', 'vpt_yz' )
1968
1969	grid_x = 'x'
1970	grid_y = 'y'
1971	grid_z = 'zu'
1972	!
1973	!-- u grid
1974	CASE ( 'u_yz' )
1975
1976	grid_x = 'xu'
1977	grid_y = 'y'
1978	grid_z = 'zu'
1979	!
1980	!-- v grid
1981	CASE ( 'v_yz' )
1982
1983	grid_x = 'x'
1984	grid_y = 'yv'
1985	grid_z = 'zu'
1986	!
1987	!-- w grid
1988	CASE ( 'w_yz' )
1989
1990	grid_x = 'x'
1991	grid_y = 'y'
1992	grid_z = 'zw'
1993
1994	CASE DEFAULT
1995	!
1996	!-- Check for user-defined quantities
1997	CALL user_define_netcdf_grid( do2d(av,i), found, &
1998	grid_x, grid_y, grid_z )
1999
2000	END SELECT
2001
2002	!
2003	!-- Select the respective dimension ids
2004	IF ( grid_x == 'x' ) THEN
2005	id_x = id_dim_x_yz(av)
2006	ELSEIF ( grid_x == 'xu' ) THEN
2007	id_x = id_dim_xu_yz(av)
2008	ENDIF
2009
2010	IF ( grid_y == 'y' ) THEN
2011	id_y = id_dim_y_yz(av)
2012	ELSEIF ( grid_y == 'yv' ) THEN
2013	id_y = id_dim_yv_yz(av)
2014	ENDIF
2015
2016	IF ( grid_z == 'zu' ) THEN
2017	id_z = id_dim_zu_yz(av)
2018	ELSEIF ( grid_z == 'zw' ) THEN
2019	id_z = id_dim_zw_yz(av)
2020	ENDIF
2021
2022	!
2023	!-- Define the grid
2024	nc_stat = NF90_DEF_VAR( id_set_yz(av), do2d(av,i), &
2025	nc_precision(3), &
2026	(/ id_x, id_y, id_z, id_dim_time_yz(av) /), &
2027	id_var_do2d(av,i) )
2028
2029	IF ( .NOT. found ) THEN
2030	WRITE ( message_string, * ) 'no grid defined for', &
2031	' variable ', TRIM( do2d(av,i) )
2032	CALL message( 'define_netcdf_header', 'PA0244',&
2033	0, 1, 0, 6, 0 )
2034	ENDIF
2035
2036	var_list = TRIM( var_list ) // TRIM( do2d(av,i) ) // ';'
2037
2038	CALL handle_netcdf_error( 'netcdf', 198 )
2039	!
2040	!-- Store the 'real' name of the variable (with *, for example)
2041	!-- in the long_name attribute. This is evaluated by Ferret,
2042	!-- for example.
2043	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_do2d(av,i), &
2044	'long_name', do2d(av,i) )
2045	CALL handle_netcdf_error( 'netcdf', 199 )
2046	!
2047	!-- Define the variable's unit
2048	nc_stat = NF90_PUT_ATT( id_set_yz(av), id_var_do2d(av,i), &
2049	'units', TRIM( do2d_unit(av,i) ) )
2050	CALL handle_netcdf_error( 'netcdf', 356 )
2051	ENDIF
2052
2053	i = i + 1
2054
2055	ENDDO
2056
2057	!
2058	!-- No arrays to output. Close the netcdf file and return.
2059	IF ( i == 1 ) RETURN
2060
2061	!
2062	!-- Write the list of variables as global attribute (this is used by
2063	!-- restart runs and by combine_plot_fields)
2064	nc_stat = NF90_PUT_ATT( id_set_yz(av), NF90_GLOBAL, 'VAR_LIST', &
2065	var_list )
2066	CALL handle_netcdf_error( 'netcdf', 200 )
2067
2068	!
2069	!-- Leave NetCDF define mode
2070	nc_stat = NF90_ENDDEF( id_set_yz(av) )
2071	CALL handle_netcdf_error( 'netcdf', 201 )
2072
2073	!
2074	!-- Write axis data: x_yz, y, zu, zw
2075	ALLOCATE( netcdf_data(1:ns) )
2076
2077	!
2078	!-- Write x_yz data (shifted by +dx/2)
2079	DO i = 1, ns
2080	IF( section(i,3) == -1 ) THEN
2081	netcdf_data(i) = -1.0 ! section averaged along x
2082	ELSE
2083	netcdf_data(i) = ( section(i,3) + 0.5 ) * dx
2084	ENDIF
2085	ENDDO
2086	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_x_yz(av), netcdf_data, &
2087	start = (/ 1 /), count = (/ ns /) )
2088	CALL handle_netcdf_error( 'netcdf', 202 )
2089
2090	!
2091	!-- Write x_yz data (xu grid)
2092	DO i = 1, ns
2093	IF( section(i,3) == -1 ) THEN
2094	netcdf_data(i) = -1.0 ! section averaged along x
2095	ELSE
2096	netcdf_data(i) = section(i,3) * dx
2097	ENDIF
2098	ENDDO
2099	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_xu_yz(av), netcdf_data, &
2100	start = (/ 1 /), count = (/ ns /) )
2101	CALL handle_netcdf_error( 'netcdf', 383 )
2102
2103	!
2104	!-- Write gridpoint number data
2105	netcdf_data(1:ns) = section(1:ns,3)
2106	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_ind_x_yz(av), &
2107	netcdf_data, start = (/ 1 /), &
2108	count = (/ ns /) )
2109	CALL handle_netcdf_error( 'netcdf', 203 )
2110
2111	DEALLOCATE( netcdf_data )
2112
2113	!
2114	!-- Write data for y (shifted by +dy/2) and yv axis
2115	ALLOCATE( netcdf_data(0:ny+1) )
2116
2117	DO j = 0, ny+1
2118	netcdf_data(j) = ( j + 0.5 ) * dy
2119	ENDDO
2120
2121	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_y_yz(av), netcdf_data, &
2122	start = (/ 1 /), count = (/ ny+2 /) )
2123	CALL handle_netcdf_error( 'netcdf', 204 )
2124
2125	DO j = 0, ny+1
2126	netcdf_data(j) = j * dy
2127	ENDDO
2128
2129	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_yv_yz(av), &
2130	netcdf_data, start = (/ 1 /), &
2131	count = (/ ny+2 /) )
2132	CALL handle_netcdf_error( 'netcdf', 384 )
2133
2134	DEALLOCATE( netcdf_data )
2135
2136	!
2137	!-- Write zu and zw data (vertical axes)
2138	ALLOCATE( netcdf_data(0:nz+1) )
2139
2140	netcdf_data(0:nz+1) = zu(nzb:nzt+1)
2141	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_zu_yz(av), &
2142	netcdf_data, start = (/ 1 /), &
2143	count = (/ nz+2 /) )
2144	CALL handle_netcdf_error( 'netcdf', 205 )
2145
2146	netcdf_data(0:nz+1) = zw(nzb:nzt+1)
2147	nc_stat = NF90_PUT_VAR( id_set_yz(av), id_var_zw_yz(av), &
2148	netcdf_data, start = (/ 1 /), &
2149	count = (/ nz+2 /) )
2150	CALL handle_netcdf_error( 'netcdf', 206 )
2151
2152	DEALLOCATE( netcdf_data )
2153
2154
2155	CASE ( 'yz_ext' )
2156
2157	!
2158	!-- Get the list of variables and compare with the actual run.
2159	!-- First var_list_old has to be reset, since GET_ATT does not assign
2160	!-- trailing blanks.
2161	var_list_old = ' '
2162	nc_stat = NF90_GET_ATT( id_set_yz(av), NF90_GLOBAL, 'VAR_LIST', &
2163	var_list_old )
2164	CALL handle_netcdf_error( 'netcdf', 207 )
2165
2166	var_list = ';'
2167	i = 1
2168	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
2169	IF ( INDEX( do2d(av,i), 'yz' ) /= 0 ) THEN
2170	netcdf_var_name = do2d(av,i)
2171	CALL clean_netcdf_varname( netcdf_var_name )
2172	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
2173	ENDIF
2174	i = i + 1
2175	ENDDO
2176
2177	IF ( av == 0 ) THEN
2178	var = '(yz)'
2179	ELSE
2180	var = '(yz_av)'
2181	ENDIF
2182
2183	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
2184	message_string = 'NetCDF file for cross-sections ' // &
2185	TRIM( var ) // ' from previous run found,' // &
2186	'& but this file cannot be extended due to' // &
2187	' variable mismatch.' // &
2188	'&New file is created instead.'
2189	CALL message( 'define_netcdf_header', 'PA0249', 0, 1, 0, 6, 0 )
2190	extend = .FALSE.
2191	RETURN
2192	ENDIF
2193
2194	!
2195	!-- Calculate the number of current sections
2196	ns = 1
2197	DO WHILE ( section(ns,3) /= -9999 .AND. ns <= 100 )
2198	ns = ns + 1
2199	ENDDO
2200	ns = ns - 1
2201
2202	!
2203	!-- Get and compare the number of vertical cross sections
2204	nc_stat = NF90_INQ_VARID( id_set_yz(av), 'x_yz', id_var_x_yz(av) )
2205	CALL handle_netcdf_error( 'netcdf', 208 )
2206
2207	nc_stat = NF90_INQUIRE_VARIABLE( id_set_yz(av), id_var_x_yz(av), &
2208	dimids = id_dim_x_yz_old )
2209	CALL handle_netcdf_error( 'netcdf', 209 )
2210	id_dim_x_yz(av) = id_dim_x_yz_old(1)
2211
2212	nc_stat = NF90_INQUIRE_DIMENSION( id_set_yz(av), id_dim_x_yz(av), &
2213	len = ns_old )
2214	CALL handle_netcdf_error( 'netcdf', 210 )
2215
2216	IF ( ns /= ns_old ) THEN
2217	message_string = 'NetCDF file for cross-sections ' // &
2218	TRIM( var ) // ' from previous run found,' // &
2219	'&but this file cannot be extended due to' // &
2220	' mismatch in number of' // &
2221	'&cross sections.' // &
2222	'&New file is created instead.'
2223	CALL message( 'define_netcdf_header', 'PA0250', 0, 1, 0, 6, 0 )
2224	extend = .FALSE.
2225	RETURN
2226	ENDIF
2227
2228	!
2229	!-- Get and compare the heights of the cross sections
2230	ALLOCATE( netcdf_data(1:ns_old) )
2231
2232	nc_stat = NF90_GET_VAR( id_set_yz(av), id_var_x_yz(av), netcdf_data )
2233	CALL handle_netcdf_error( 'netcdf', 211 )
2234
2235	DO i = 1, ns
2236	IF ( section(i,3) /= -1 ) THEN
2237	IF ( ( section(i,3) * dx ) /= netcdf_data(i) ) THEN
2238	message_string = 'NetCDF file for cross-sections ' // &
2239	TRIM( var ) // ' from previous run found,' // &
2240	'&but this file cannot be extended' // &
2241	' due to mismatch in cross' // &
2242	'&section levels.' // &
2243	'&New file is created instead.'
2244	CALL message( 'define_netcdf_header', 'PA0251', &
2245	0, 1, 0, 6, 0 )
2246	extend = .FALSE.
2247	RETURN
2248	ENDIF
2249	ELSE
2250	IF ( -1.0 /= netcdf_data(i) ) THEN
2251	message_string = 'NetCDF file for cross-sections ' // &
2252	TRIM( var ) // ' from previous run found,' // &
2253	'&but this file cannot be extended' // &
2254	' due to mismatch in cross' // &
2255	'&section levels.' // &
2256	'&New file is created instead.'
2257	CALL message( 'define_netcdf_header', 'PA0251', &
2258	0, 1, 0, 6, 0 )
2259	extend = .FALSE.
2260	RETURN
2261	ENDIF
2262	ENDIF
2263	ENDDO
2264
2265	DEALLOCATE( netcdf_data )
2266
2267	!
2268	!-- Get the id of the time coordinate (unlimited coordinate) and its
2269	!-- last index on the file. The next time level is pl2d..count+1.
2270	!-- The current time must be larger than the last output time
2271	!-- on the file.
2272	nc_stat = NF90_INQ_VARID( id_set_yz(av), 'time', id_var_time_yz(av) )
2273	CALL handle_netcdf_error( 'netcdf', 212 )
2274
2275	nc_stat = NF90_INQUIRE_VARIABLE( id_set_yz(av), id_var_time_yz(av), &
2276	dimids = id_dim_time_old )
2277	CALL handle_netcdf_error( 'netcdf', 213 )
2278	id_dim_time_yz(av) = id_dim_time_old(1)
2279
2280	nc_stat = NF90_INQUIRE_DIMENSION( id_set_yz(av), id_dim_time_yz(av), &
2281	len = do2d_yz_time_count(av) )
2282	CALL handle_netcdf_error( 'netcdf', 214 )
2283
2284	nc_stat = NF90_GET_VAR( id_set_yz(av), id_var_time_yz(av), &
2285	last_time_coordinate, &
2286	start = (/ do2d_yz_time_count(av) /), &
2287	count = (/ 1 /) )
2288	CALL handle_netcdf_error( 'netcdf', 215 )
2289
2290	IF ( last_time_coordinate(1) >= simulated_time ) THEN
2291	message_string = 'NetCDF file for cross sections ' // &
2292	TRIM( var ) // ' from previous run found,' // &
2293	'&but this file cannot be extended becaus' // &
2294	'e the current output time' // &
2295	'&is less or equal than the last output t' // &
2296	'ime on this file.' // &
2297	'&New file is created instead.'
2298	CALL message( 'define_netcdf_header', 'PA0252', 0, 1, 0, 6, 0 )
2299	do2d_yz_time_count(av) = 0
2300	extend = .FALSE.
2301	RETURN
2302	ENDIF
2303
2304	!
2305	!-- Dataset seems to be extendable.
2306	!-- Now get the variable ids.
2307	i = 1
2308	DO WHILE ( do2d(av,i)(1:1) /= ' ' )
2309	IF ( INDEX( do2d(av,i), 'yz' ) /= 0 ) THEN
2310	netcdf_var_name = do2d(av,i)
2311	CALL clean_netcdf_varname( netcdf_var_name )
2312	nc_stat = NF90_INQ_VARID( id_set_yz(av), netcdf_var_name, &
2313	id_var_do2d(av,i) )
2314	CALL handle_netcdf_error( 'netcdf', 216 )
2315	ENDIF
2316	i = i + 1
2317	ENDDO
2318
2319	!
2320	!-- Change the title attribute on file
2321	nc_stat = NF90_PUT_ATT( id_set_yz(av), NF90_GLOBAL, 'title', &
2322	TRIM( run_description_header ) )
2323	CALL handle_netcdf_error( 'netcdf', 217 )
2324	message_string = 'NetCDF file for cross-sections ' // &
2325	TRIM( var ) // ' from previous run found.' // &
2326	'&This file will be extended.'
2327	CALL message( 'define_netcdf_header', 'PA0253', 0, 0, 0, 6, 0 )
2328
2329
2330	CASE ( 'pr_new' )
2331
2332	!
2333	!-- Define some global attributes of the dataset
2334	IF ( averaging_interval_pr /= 0.0 ) THEN
2335	WRITE (time_average_text,'('', '',F7.1,'' s average'')') &
2336	averaging_interval_pr
2337	nc_stat = NF90_PUT_ATT( id_set_pr, NF90_GLOBAL, 'title', &
2338	TRIM( run_description_header ) // &
2339	TRIM( time_average_text ) )
2340	CALL handle_netcdf_error( 'netcdf', 218 )
2341
2342	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval_pr
2343	nc_stat = NF90_PUT_ATT( id_set_pr, NF90_GLOBAL, 'time_avg', &
2344	TRIM( time_average_text ) )
2345	ELSE
2346	nc_stat = NF90_PUT_ATT( id_set_pr, NF90_GLOBAL, 'title', &
2347	TRIM( run_description_header ) )
2348	ENDIF
2349	CALL handle_netcdf_error( 'netcdf', 219 )
2350
2351	!
2352	!-- Define time coordinate for profiles (unlimited dimension)
2353	nc_stat = NF90_DEF_DIM( id_set_pr, 'time', NF90_UNLIMITED, &
2354	id_dim_time_pr )
2355	CALL handle_netcdf_error( 'netcdf', 220 )
2356
2357	nc_stat = NF90_DEF_VAR( id_set_pr, 'time', NF90_DOUBLE, &
2358	id_dim_time_pr, id_var_time_pr )
2359	CALL handle_netcdf_error( 'netcdf', 221 )
2360
2361	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_time_pr, 'units', 'seconds')
2362	CALL handle_netcdf_error( 'netcdf', 222 )
2363
2364	!
2365	!-- Define the variables
2366	var_list = ';'
2367	DO i = 1, dopr_n
2368	!
2369	!-- First, remove those characters not allowed by NetCDF
2370	netcdf_var_name = data_output_pr(i)
2371	CALL clean_netcdf_varname( netcdf_var_name )
2372
2373	IF ( statistic_regions == 0 ) THEN
2374
2375	!
2376	!-- Define the z-axes (each variable gets its own z-axis)
2377	nc_stat = NF90_DEF_DIM( id_set_pr, 'z'//TRIM(netcdf_var_name), &
2378	nzt+2-nzb, id_dim_z_pr(i,0) )
2379	CALL handle_netcdf_error( 'netcdf', 223 )
2380
2381	nc_stat = NF90_DEF_VAR( id_set_pr, 'z'//TRIM(netcdf_var_name), &
2382	NF90_DOUBLE, id_dim_z_pr(i,0), &
2383	id_var_z_pr(i,0) )
2384	CALL handle_netcdf_error( 'netcdf', 224 )
2385
2386	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_z_pr(i,0), 'units', &
2387	'meters' )
2388	CALL handle_netcdf_error( 'netcdf', 225 )
2389	!
2390	!-- Define the variable
2391	nc_stat = NF90_DEF_VAR( id_set_pr, netcdf_var_name, &
2392	nc_precision(5), (/ id_dim_z_pr(i,0), &
2393	id_dim_time_pr /), id_var_dopr(i,0) )
2394	CALL handle_netcdf_error( 'netcdf', 226 )
2395
2396	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_dopr(i,0), &
2397	'long_name', TRIM( data_output_pr(i) ) )
2398	CALL handle_netcdf_error( 'netcdf', 227 )
2399
2400	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_dopr(i,0), &
2401	'units', TRIM( dopr_unit(i) ) )
2402	CALL handle_netcdf_error( 'netcdf', 228 )
2403
2404	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
2405
2406	ELSE
2407	!
2408	!-- If statistic regions are defined, add suffix _SR+#SR to the
2409	!-- names
2410	DO j = 0, statistic_regions
2411	WRITE ( suffix, '(''_'',I1)' ) j
2412
2413	!
2414	!-- Define the z-axes (each variable gets it own z-axis)
2415	nc_stat = NF90_DEF_DIM( id_set_pr, &
2416	'z'//TRIM(netcdf_var_name)//suffix, &
2417	nzt+2-nzb, id_dim_z_pr(i,j) )
2418	CALL handle_netcdf_error( 'netcdf', 229 )
2419
2420	nc_stat = NF90_DEF_VAR( id_set_pr, &
2421	'z'//TRIM(netcdf_var_name)//suffix, &
2422	nc_precision(5), id_dim_z_pr(i,j), &
2423	id_var_z_pr(i,j) )
2424	CALL handle_netcdf_error( 'netcdf', 230 )
2425
2426	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_z_pr(i,j), &
2427	'units', 'meters' )
2428	CALL handle_netcdf_error( 'netcdf', 231 )
2429
2430	!
2431	!-- Define the variable
2432	nc_stat = NF90_DEF_VAR( id_set_pr, &
2433	TRIM( netcdf_var_name ) // suffix, &
2434	nc_precision(5), &
2435	(/ id_dim_z_pr(i,j), &
2436	id_dim_time_pr /), id_var_dopr(i,j) )
2437	CALL handle_netcdf_error( 'netcdf', 232 )
2438
2439	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_dopr(i,j), &
2440	'long_name', &
2441	TRIM( data_output_pr(i) ) // ' SR ' &
2442	// suffix(2:2) )
2443	CALL handle_netcdf_error( 'netcdf', 233 )
2444
2445	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_dopr(i,j), &
2446	'units', TRIM( dopr_unit(i) ) )
2447	CALL handle_netcdf_error( 'netcdf', 234 )
2448
2449	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // &
2450	suffix // ';'
2451
2452	ENDDO
2453
2454	ENDIF
2455
2456	ENDDO
2457
2458	!
2459	!-- Write the list of variables as global attribute (this is used by
2460	!-- restart runs)
2461	nc_stat = NF90_PUT_ATT( id_set_pr, NF90_GLOBAL, 'VAR_LIST', var_list )
2462	CALL handle_netcdf_error( 'netcdf', 235 )
2463
2464	!
2465	!-- Define normalization variables (as time series)
2466	DO i = 1, dopr_norm_num
2467
2468	nc_stat = NF90_DEF_VAR( id_set_pr, 'NORM_' // &
2469	TRIM( dopr_norm_names(i) ), &
2470	nc_precision(5), (/ id_dim_time_pr /), &
2471	id_var_norm_dopr(i) )
2472	CALL handle_netcdf_error( 'netcdf', 236 )
2473
2474	nc_stat = NF90_PUT_ATT( id_set_pr, id_var_norm_dopr(i), &
2475	'long_name', &
2476	TRIM( dopr_norm_longnames(i) ) )
2477	CALL handle_netcdf_error( 'netcdf', 237 )
2478
2479	ENDDO
2480
2481	!
2482	!-- Leave NetCDF define mode
2483	nc_stat = NF90_ENDDEF( id_set_pr )
2484	CALL handle_netcdf_error( 'netcdf', 238 )
2485
2486	!
2487	!-- Write z-axes data
2488	DO i = 1, dopr_n
2489	DO j = 0, statistic_regions
2490
2491	nc_stat = NF90_PUT_VAR( id_set_pr, id_var_z_pr(i,j), &
2492	hom(nzb:nzt+1,2,dopr_index(i),0), &
2493	start = (/ 1 /), &
2494	count = (/ nzt-nzb+2 /) )
2495	CALL handle_netcdf_error( 'netcdf', 239 )
2496
2497	ENDDO
2498	ENDDO
2499
2500
2501	CASE ( 'pr_ext' )
2502
2503	!
2504	!-- Get the list of variables and compare with the actual run.
2505	!-- First var_list_old has to be reset, since GET_ATT does not assign
2506	!-- trailing blanks.
2507	var_list_old = ' '
2508	nc_stat = NF90_GET_ATT( id_set_pr, NF90_GLOBAL, 'VAR_LIST', &
2509	var_list_old )
2510	CALL handle_netcdf_error( 'netcdf', 240 )
2511
2512	var_list = ';'
2513	DO i = 1, dopr_n
2514
2515	netcdf_var_name = data_output_pr(i)
2516	CALL clean_netcdf_varname( netcdf_var_name )
2517
2518	IF ( statistic_regions == 0 ) THEN
2519	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
2520	ELSE
2521	DO j = 0, statistic_regions
2522	WRITE ( suffix, '(''_'',I1)' ) j
2523	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // &
2524	suffix // ';'
2525	ENDDO
2526	ENDIF
2527
2528	ENDDO
2529
2530	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
2531	message_string = 'NetCDF file for vertical profiles ' // &
2532	'from previous run found,' // &
2533	'& but this file cannot be extended due to' // &
2534	' variable mismatch.' // &
2535	'&New file is created instead.'
2536	CALL message( 'define_netcdf_header', 'PA0254', 0, 1, 0, 6, 0 )
2537	extend = .FALSE.
2538	RETURN
2539	ENDIF
2540
2541	!
2542	!-- Get the id of the time coordinate (unlimited coordinate) and its
2543	!-- last index on the file. The next time level is dopr..count+1.
2544	!-- The current time must be larger than the last output time
2545	!-- on the file.
2546	nc_stat = NF90_INQ_VARID( id_set_pr, 'time', id_var_time_pr )
2547	CALL handle_netcdf_error( 'netcdf', 241 )
2548
2549	nc_stat = NF90_INQUIRE_VARIABLE( id_set_pr, id_var_time_pr, &
2550	dimids = id_dim_time_old )
2551	CALL handle_netcdf_error( 'netcdf', 242 )
2552	id_dim_time_pr = id_dim_time_old(1)
2553
2554	nc_stat = NF90_INQUIRE_DIMENSION( id_set_pr, id_dim_time_pr, &
2555	len = dopr_time_count )
2556	CALL handle_netcdf_error( 'netcdf', 243 )
2557
2558	nc_stat = NF90_GET_VAR( id_set_pr, id_var_time_pr, &
2559	last_time_coordinate, &
2560	start = (/ dopr_time_count /), &
2561	count = (/ 1 /) )
2562	CALL handle_netcdf_error( 'netcdf', 244 )
2563
2564	IF ( last_time_coordinate(1) >= simulated_time ) THEN
2565	message_string = 'NetCDF file for vertical profiles ' // &
2566	'from previous run found,' // &
2567	'&but this file cannot be extended becaus' // &
2568	'e the current output time' // &
2569	'&is less or equal than the last output t' // &
2570	'ime on this file.' // &
2571	'&New file is created instead.'
2572	CALL message( 'define_netcdf_header', 'PA0255', 0, 1, 0, 6, 0 )
2573	dopr_time_count = 0
2574	extend = .FALSE.
2575	RETURN
2576	ENDIF
2577
2578	!
2579	!-- Dataset seems to be extendable.
2580	!-- Now get the variable ids.
2581	i = 1
2582	DO i = 1, dopr_n
2583
2584	netcdf_var_name_base = data_output_pr(i)
2585	CALL clean_netcdf_varname( netcdf_var_name_base )
2586
2587	IF ( statistic_regions == 0 ) THEN
2588	nc_stat = NF90_INQ_VARID( id_set_pr, netcdf_var_name_base, &
2589	id_var_dopr(i,0) )
2590	CALL handle_netcdf_error( 'netcdf', 245 )
2591	ELSE
2592	DO j = 0, statistic_regions
2593	WRITE ( suffix, '(''_'',I1)' ) j
2594	netcdf_var_name = TRIM( netcdf_var_name_base ) // suffix
2595	nc_stat = NF90_INQ_VARID( id_set_pr, netcdf_var_name, &
2596	id_var_dopr(i,j) )
2597	CALL handle_netcdf_error( 'netcdf', 246 )
2598	ENDDO
2599	ENDIF
2600
2601	ENDDO
2602
2603	!
2604	!-- Get ids of the normalization variables
2605	DO i = 1, dopr_norm_num
2606	nc_stat = NF90_INQ_VARID( id_set_pr, &
2607	'NORM_' // TRIM( dopr_norm_names(i) ), &
2608	id_var_norm_dopr(i) )
2609	CALL handle_netcdf_error( 'netcdf', 247 )
2610	ENDDO
2611
2612	!
2613	!-- Change the title attribute on file
2614	nc_stat = NF90_PUT_ATT( id_set_pr, NF90_GLOBAL, 'title', &
2615	TRIM( run_description_header ) )
2616	CALL handle_netcdf_error( 'netcdf', 248 )
2617	message_string = 'NetCDF file for vertical profiles ' // &
2618	'from previous run found.' // &
2619	'&This file will be extended.'
2620	CALL message( 'define_netcdf_header', 'PA0256', 0, 0, 0, 6, 0 )
2621
2622
2623	CASE ( 'ts_new' )
2624
2625	!
2626	!-- Define some global attributes of the dataset
2627	nc_stat = NF90_PUT_ATT( id_set_ts, NF90_GLOBAL, 'title', &
2628	TRIM( run_description_header ) )
2629	CALL handle_netcdf_error( 'netcdf', 249 )
2630
2631	!
2632	!-- Define time coordinate for time series (unlimited dimension)
2633	nc_stat = NF90_DEF_DIM( id_set_ts, 'time', NF90_UNLIMITED, &
2634	id_dim_time_ts )
2635	CALL handle_netcdf_error( 'netcdf', 250 )
2636
2637	nc_stat = NF90_DEF_VAR( id_set_ts, 'time', NF90_DOUBLE, &
2638	id_dim_time_ts, id_var_time_ts )
2639	CALL handle_netcdf_error( 'netcdf', 251 )
2640
2641	nc_stat = NF90_PUT_ATT( id_set_ts, id_var_time_ts, 'units', 'seconds')
2642	CALL handle_netcdf_error( 'netcdf', 252 )
2643
2644	!
2645	!-- Define the variables
2646	var_list = ';'
2647	DO i = 1, dots_num
2648	!
2649	!-- First, remove those characters not allowed by NetCDF
2650	netcdf_var_name = dots_label(i)
2651	CALL clean_netcdf_varname( netcdf_var_name )
2652
2653	IF ( statistic_regions == 0 ) THEN
2654
2655	nc_stat = NF90_DEF_VAR( id_set_ts, netcdf_var_name, &
2656	nc_precision(6), (/ id_dim_time_ts /), &
2657	id_var_dots(i,0) )
2658	CALL handle_netcdf_error( 'netcdf', 253 )
2659
2660	nc_stat = NF90_PUT_ATT( id_set_ts, id_var_dots(i,0), &
2661	'long_name', TRIM( dots_label(i) ) )
2662	CALL handle_netcdf_error( 'netcdf', 254 )
2663
2664	nc_stat = NF90_PUT_ATT( id_set_ts, id_var_dots(i,0), &
2665	'units', TRIM( dots_unit(i) ) )
2666	CALL handle_netcdf_error( 'netcdf', 255 )
2667
2668	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
2669
2670	ELSE
2671	!
2672	!-- If statistic regions are defined, add suffix _SR+#SR to the
2673	!-- names
2674	DO j = 0, statistic_regions
2675	WRITE ( suffix, '(''_'',I1)' ) j
2676
2677	nc_stat = NF90_DEF_VAR( id_set_ts, &
2678	TRIM( netcdf_var_name ) // suffix, &
2679	nc_precision(6), &
2680	(/ id_dim_time_ts /), &
2681	id_var_dots(i,j) )
2682	CALL handle_netcdf_error( 'netcdf', 256 )
2683
2684	nc_stat = NF90_PUT_ATT( id_set_ts, id_var_dots(i,j), &
2685	'long_name', &
2686	TRIM( dots_label(i) ) // ' SR ' // &
2687	suffix(2:2) )
2688	CALL handle_netcdf_error( 'netcdf', 257 )
2689
2690	nc_stat = NF90_PUT_ATT( id_set_ts, id_var_dots(i,j), &
2691	'units', TRIM( dots_unit(i) ) )
2692	CALL handle_netcdf_error( 'netcdf', 347 )
2693
2694	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // &
2695	suffix // ';'
2696
2697	ENDDO
2698
2699	ENDIF
2700
2701	ENDDO
2702
2703	!
2704	!-- Write the list of variables as global attribute (this is used by
2705	!-- restart runs)
2706	nc_stat = NF90_PUT_ATT( id_set_ts, NF90_GLOBAL, 'VAR_LIST', var_list )
2707	CALL handle_netcdf_error( 'netcdf', 258 )
2708
2709	!
2710	!-- Leave NetCDF define mode
2711	nc_stat = NF90_ENDDEF( id_set_ts )
2712	CALL handle_netcdf_error( 'netcdf', 259 )
2713
2714
2715	CASE ( 'ts_ext' )
2716
2717	!
2718	!-- Get the list of variables and compare with the actual run.
2719	!-- First var_list_old has to be reset, since GET_ATT does not assign
2720	!-- trailing blanks.
2721	var_list_old = ' '
2722	nc_stat = NF90_GET_ATT( id_set_ts, NF90_GLOBAL, 'VAR_LIST', &
2723	var_list_old )
2724	CALL handle_netcdf_error( 'netcdf', 260 )
2725
2726	var_list = ';'
2727	i = 1
2728	DO i = 1, dots_num
2729
2730	netcdf_var_name = dots_label(i)
2731	CALL clean_netcdf_varname( netcdf_var_name )
2732
2733	IF ( statistic_regions == 0 ) THEN
2734	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // ';'
2735	ELSE
2736	DO j = 0, statistic_regions
2737	WRITE ( suffix, '(''_'',I1)' ) j
2738	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // &
2739	suffix // ';'
2740	ENDDO
2741	ENDIF
2742
2743	ENDDO
2744
2745	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
2746	message_string = 'NetCDF file for time series ' // &
2747	'from previous run found,' // &
2748	'& but this file cannot be extended due to' // &
2749	' variable mismatch.' // &
2750	'&New file is created instead.'
2751	CALL message( 'define_netcdf_header', 'PA0257', 0, 1, 0, 6, 0 )
2752	extend = .FALSE.
2753	RETURN
2754	ENDIF
2755
2756	!
2757	!-- Get the id of the time coordinate (unlimited coordinate) and its
2758	!-- last index on the file. The next time level is dots..count+1.
2759	!-- The current time must be larger than the last output time
2760	!-- on the file.
2761	nc_stat = NF90_INQ_VARID( id_set_ts, 'time', id_var_time_ts )
2762	CALL handle_netcdf_error( 'netcdf', 261 )
2763
2764	nc_stat = NF90_INQUIRE_VARIABLE( id_set_ts, id_var_time_ts, &
2765	dimids = id_dim_time_old )
2766	CALL handle_netcdf_error( 'netcdf', 262 )
2767	id_dim_time_ts = id_dim_time_old(1)
2768
2769	nc_stat = NF90_INQUIRE_DIMENSION( id_set_ts, id_dim_time_ts, &
2770	len = dots_time_count )
2771	CALL handle_netcdf_error( 'netcdf', 263 )
2772
2773	nc_stat = NF90_GET_VAR( id_set_ts, id_var_time_ts, &
2774	last_time_coordinate, &
2775	start = (/ dots_time_count /), &
2776	count = (/ 1 /) )
2777	CALL handle_netcdf_error( 'netcdf', 264 )
2778
2779	IF ( last_time_coordinate(1) >= simulated_time ) THEN
2780	message_string = 'NetCDF file for time series ' // &
2781	'from previous run found,' // &
2782	'&but this file cannot be extended becaus' // &
2783	'e the current output time' // &
2784	'&is less or equal than the last output t' // &
2785	'ime on this file.' // &
2786	'&New file is created instead.'
2787	CALL message( 'define_netcdf_header', 'PA0258', 0, 1, 0, 6, 0 )
2788	dots_time_count = 0
2789	extend = .FALSE.
2790	RETURN
2791	ENDIF
2792
2793	!
2794	!-- Dataset seems to be extendable.
2795	!-- Now get the variable ids
2796	i = 1
2797	DO i = 1, dots_num
2798
2799	netcdf_var_name_base = dots_label(i)
2800	CALL clean_netcdf_varname( netcdf_var_name_base )
2801
2802	IF ( statistic_regions == 0 ) THEN
2803	nc_stat = NF90_INQ_VARID( id_set_ts, netcdf_var_name_base, &
2804	id_var_dots(i,0) )
2805	CALL handle_netcdf_error( 'netcdf', 265 )
2806	ELSE
2807	DO j = 0, statistic_regions
2808	WRITE ( suffix, '(''_'',I1)' ) j
2809	netcdf_var_name = TRIM( netcdf_var_name_base ) // suffix
2810	nc_stat = NF90_INQ_VARID( id_set_ts, netcdf_var_name, &
2811	id_var_dots(i,j) )
2812	CALL handle_netcdf_error( 'netcdf', 266 )
2813	ENDDO
2814	ENDIF
2815
2816	ENDDO
2817
2818	!
2819	!-- Change the title attribute on file
2820	nc_stat = NF90_PUT_ATT( id_set_ts, NF90_GLOBAL, 'title', &
2821	TRIM( run_description_header ) )
2822	CALL handle_netcdf_error( 'netcdf', 267 )
2823	message_string = 'NetCDF file for time series ' // &
2824	'from previous run found.' // &
2825	'&This file will be extended.'
2826	CALL message( 'define_netcdf_header', 'PA0259', 0, 0, 0, 6, 0 )
2827
2828
2829	CASE ( 'sp_new' )
2830
2831	!
2832	!-- Define some global attributes of the dataset
2833	IF ( averaging_interval_sp /= 0.0 ) THEN
2834	WRITE (time_average_text,'('', '',F7.1,'' s average'')') &
2835	averaging_interval_sp
2836	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'title', &
2837	TRIM( run_description_header ) // &
2838	TRIM( time_average_text ) )
2839	CALL handle_netcdf_error( 'netcdf', 268 )
2840
2841	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval_sp
2842	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'time_avg', &
2843	TRIM( time_average_text ) )
2844	ELSE
2845	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'title', &
2846	TRIM( run_description_header ) )
2847	ENDIF
2848	CALL handle_netcdf_error( 'netcdf', 269 )
2849
2850	!
2851	!-- Define time coordinate for spectra (unlimited dimension)
2852	nc_stat = NF90_DEF_DIM( id_set_sp, 'time', NF90_UNLIMITED, &
2853	id_dim_time_sp )
2854	CALL handle_netcdf_error( 'netcdf', 270 )
2855
2856	nc_stat = NF90_DEF_VAR( id_set_sp, 'time', NF90_DOUBLE, &
2857	id_dim_time_sp, id_var_time_sp )
2858	CALL handle_netcdf_error( 'netcdf', 271 )
2859
2860	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_time_sp, 'units', 'seconds')
2861	CALL handle_netcdf_error( 'netcdf', 272 )
2862
2863	!
2864	!-- Define the spatial dimensions and coordinates for spectra.
2865	!-- First, determine the number of vertical levels for which spectra
2866	!-- are to be output.
2867	ns = 1
2868	DO WHILE ( comp_spectra_level(ns) /= 999999 .AND. ns <= 100 )
2869	ns = ns + 1
2870	ENDDO
2871	ns = ns - 1
2872
2873	!
2874	!-- Define vertical coordinate grid (zu grid)
2875	nc_stat = NF90_DEF_DIM( id_set_sp, 'zu_sp', ns, id_dim_zu_sp )
2876	CALL handle_netcdf_error( 'netcdf', 273 )
2877
2878	nc_stat = NF90_DEF_VAR( id_set_sp, 'zu_sp', NF90_DOUBLE, &
2879	id_dim_zu_sp, id_var_zu_sp )
2880	CALL handle_netcdf_error( 'netcdf', 274 )
2881
2882	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_zu_sp, 'units', 'meters' )
2883	CALL handle_netcdf_error( 'netcdf', 275 )
2884
2885	!
2886	!-- Define vertical coordinate grid (zw grid)
2887	nc_stat = NF90_DEF_DIM( id_set_sp, 'zw_sp', ns, id_dim_zw_sp )
2888	CALL handle_netcdf_error( 'netcdf', 276 )
2889
2890	nc_stat = NF90_DEF_VAR( id_set_sp, 'zw_sp', NF90_DOUBLE, &
2891	id_dim_zw_sp, id_var_zw_sp )
2892	CALL handle_netcdf_error( 'netcdf', 277 )
2893
2894	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_zw_sp, 'units', 'meters' )
2895	CALL handle_netcdf_error( 'netcdf', 278 )
2896
2897	!
2898	!-- Define x-axis
2899	nc_stat = NF90_DEF_DIM( id_set_sp, 'k_x', nx/2, id_dim_x_sp )
2900	CALL handle_netcdf_error( 'netcdf', 279 )
2901
2902	nc_stat = NF90_DEF_VAR( id_set_sp, 'k_x', NF90_DOUBLE, id_dim_x_sp, &
2903	id_var_x_sp )
2904	CALL handle_netcdf_error( 'netcdf', 280 )
2905
2906	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_x_sp, 'units', 'm-1' )
2907	CALL handle_netcdf_error( 'netcdf', 281 )
2908
2909	!
2910	!-- Define y-axis
2911	nc_stat = NF90_DEF_DIM( id_set_sp, 'k_y', ny/2, id_dim_y_sp )
2912	CALL handle_netcdf_error( 'netcdf', 282 )
2913
2914	nc_stat = NF90_DEF_VAR( id_set_sp, 'k_y', NF90_DOUBLE, id_dim_y_sp, &
2915	id_var_y_sp )
2916	CALL handle_netcdf_error( 'netcdf', 283 )
2917
2918	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_y_sp, 'units', 'm-1' )
2919	CALL handle_netcdf_error( 'netcdf', 284 )
2920
2921	!
2922	!-- Define the variables
2923	var_list = ';'
2924	i = 1
2925	DO WHILE ( data_output_sp(i) /= ' ' .AND. i <= 10 )
2926	!
2927	!-- First check for the vertical grid
2928	found = .TRUE.
2929	SELECT CASE ( data_output_sp(i) )
2930	!
2931	!-- Most variables are defined on the zu levels
2932	CASE ( 'e', 'p', 'pc', 'pr', 'pt', 'q', 'ql', 'ql_c', 'ql_v', &
2933	'ql_vp', 'qv', 'rho', 's', 'sa', 'u', 'v', 'vpt' )
2934
2935	grid_z = 'zu'
2936	!
2937	!-- zw levels
2938	CASE ( 'w' )
2939
2940	grid_z = 'zw'
2941
2942	CASE DEFAULT
2943	!
2944	!-- Check for user-defined quantities (found, grid_x and grid_y
2945	!-- are dummies)
2946	CALL user_define_netcdf_grid( data_output_sp(i), found, &
2947	grid_x, grid_y, grid_z )
2948
2949	END SELECT
2950
2951	IF ( INDEX( spectra_direction(i), 'x' ) /= 0 ) THEN
2952
2953	!
2954	!-- Define the variable
2955	netcdf_var_name = TRIM( data_output_sp(i) ) // '_x'
2956	CALL clean_netcdf_varname( netcdf_var_name )
2957	IF ( TRIM( grid_z ) == 'zw' ) THEN
2958	nc_stat = NF90_DEF_VAR( id_set_sp, netcdf_var_name, &
2959	nc_precision(7), (/ id_dim_x_sp, &
2960	id_dim_zw_sp, id_dim_time_sp /), &
2961	id_var_dospx(i) )
2962	ELSE
2963	nc_stat = NF90_DEF_VAR( id_set_sp, netcdf_var_name, &
2964	nc_precision(7), (/ id_dim_x_sp, &
2965	id_dim_zu_sp, id_dim_time_sp /), &
2966	id_var_dospx(i) )
2967	ENDIF
2968	CALL handle_netcdf_error( 'netcdf', 285 )
2969
2970	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_dospx(i), &
2971	'long_name', netcdf_var_name )
2972	CALL handle_netcdf_error( 'netcdf', 286 )
2973
2974	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_dospx(i), &
2975	'units', 'unknown' )
2976	CALL handle_netcdf_error( 'netcdf', 287 )
2977
2978	var_list = TRIM( var_list ) // TRIM( netcdf_var_name ) // ';'
2979
2980	ENDIF
2981
2982	IF ( INDEX( spectra_direction(i), 'y' ) /= 0 ) THEN
2983
2984	!
2985	!-- Define the variable
2986	netcdf_var_name = TRIM( data_output_sp(i) ) // '_y'
2987	CALL clean_netcdf_varname( netcdf_var_name )
2988	IF ( TRIM( grid_z ) == 'zw' ) THEN
2989	nc_stat = NF90_DEF_VAR( id_set_sp, netcdf_var_name, &
2990	nc_precision(7), (/ id_dim_y_sp, &
2991	id_dim_zw_sp, id_dim_time_sp /), &
2992	id_var_dospy(i) )
2993	ELSE
2994	nc_stat = NF90_DEF_VAR( id_set_sp, netcdf_var_name, &
2995	nc_precision(7), (/ id_dim_y_sp, &
2996	id_dim_zu_sp, id_dim_time_sp /), &
2997	id_var_dospy(i) )
2998	ENDIF
2999	CALL handle_netcdf_error( 'netcdf', 288 )
3000
3001	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_dospy(i), &
3002	'long_name', netcdf_var_name )
3003	CALL handle_netcdf_error( 'netcdf', 289 )
3004
3005	nc_stat = NF90_PUT_ATT( id_set_sp, id_var_dospy(i), &
3006	'units', 'unknown' )
3007	CALL handle_netcdf_error( 'netcdf', 290 )
3008
3009	var_list = TRIM( var_list ) // TRIM( netcdf_var_name ) // ';'
3010
3011	ENDIF
3012
3013	i = i + 1
3014
3015	ENDDO
3016
3017	!
3018	!-- Write the list of variables as global attribute (this is used by
3019	!-- restart runs)
3020	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'VAR_LIST', var_list )
3021	CALL handle_netcdf_error( 'netcdf', 291 )
3022
3023	!
3024	!-- Leave NetCDF define mode
3025	nc_stat = NF90_ENDDEF( id_set_sp )
3026	CALL handle_netcdf_error( 'netcdf', 292 )
3027
3028	!
3029	!-- Write axis data: zu_sp, zw_sp, k_x, k_y
3030	ALLOCATE( netcdf_data(1:ns) )
3031
3032	!
3033	!-- Write zu data
3034	netcdf_data(1:ns) = zu( comp_spectra_level(1:ns) )
3035	nc_stat = NF90_PUT_VAR( id_set_sp, id_var_zu_sp, netcdf_data, &
3036	start = (/ 1 /), count = (/ ns /) )
3037	CALL handle_netcdf_error( 'netcdf', 293 )
3038
3039	!
3040	!-- Write zw data
3041	netcdf_data(1:ns) = zw( comp_spectra_level(1:ns) )
3042	nc_stat = NF90_PUT_VAR( id_set_sp, id_var_zw_sp, netcdf_data, &
3043	start = (/ 1 /), count = (/ ns /) )
3044	CALL handle_netcdf_error( 'netcdf', 294 )
3045
3046	DEALLOCATE( netcdf_data )
3047
3048	!
3049	!-- Write data for x and y axis (wavenumbers)
3050	ALLOCATE( netcdf_data(nx/2) )
3051	DO i = 1, nx/2
3052	netcdf_data(i) = 2.0 * pi * i / ( dx * ( nx + 1 ) )
3053	ENDDO
3054
3055	nc_stat = NF90_PUT_VAR( id_set_sp, id_var_x_sp, netcdf_data, &
3056	start = (/ 1 /), count = (/ nx/2 /) )
3057	CALL handle_netcdf_error( 'netcdf', 295 )
3058
3059	DEALLOCATE( netcdf_data )
3060
3061	ALLOCATE( netcdf_data(ny/2) )
3062	DO i = 1, ny/2
3063	netcdf_data(i) = 2.0 * pi * i / ( dy * ( ny + 1 ) )
3064	ENDDO
3065
3066	nc_stat = NF90_PUT_VAR( id_set_sp, id_var_y_sp, netcdf_data, &
3067	start = (/ 1 /), count = (/ ny/2 /) )
3068	CALL handle_netcdf_error( 'netcdf', 296 )
3069
3070	DEALLOCATE( netcdf_data )
3071
3072
3073	CASE ( 'sp_ext' )
3074
3075	!
3076	!-- Get the list of variables and compare with the actual run.
3077	!-- First var_list_old has to be reset, since GET_ATT does not assign
3078	!-- trailing blanks.
3079	var_list_old = ' '
3080	nc_stat = NF90_GET_ATT( id_set_sp, NF90_GLOBAL, 'VAR_LIST', &
3081	var_list_old )
3082	CALL handle_netcdf_error( 'netcdf', 297 )
3083	var_list = ';'
3084	i = 1
3085	DO WHILE ( data_output_sp(i) /= ' ' .AND. i <= 10 )
3086
3087	IF ( INDEX( spectra_direction(i), 'x' ) /= 0 ) THEN
3088	netcdf_var_name = TRIM( data_output_sp(i) ) // '_x'
3089	var_list = TRIM( var_list ) // TRIM( netcdf_var_name ) // ';'
3090	ENDIF
3091
3092	IF ( INDEX( spectra_direction(i), 'y' ) /= 0 ) THEN
3093	netcdf_var_name = TRIM( data_output_sp(i) ) // '_y'
3094	var_list = TRIM( var_list ) // TRIM( netcdf_var_name ) // ';'
3095	ENDIF
3096
3097	i = i + 1
3098
3099	ENDDO
3100
3101	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
3102	message_string = 'NetCDF file for spectra ' // &
3103	'from previous run found,' // &
3104	'& but this file cannot be extended due to' // &
3105	' variable mismatch.' // &
3106	'&New file is created instead.'
3107	CALL message( 'define_netcdf_header', 'PA0260', 0, 1, 0, 6, 0 )
3108	extend = .FALSE.
3109	RETURN
3110	ENDIF
3111
3112	!
3113	!-- Determine the number of current vertical levels for which spectra
3114	!-- shall be output
3115	ns = 1
3116	DO WHILE ( comp_spectra_level(ns) /= 999999 .AND. ns <= 100 )
3117	ns = ns + 1
3118	ENDDO
3119	ns = ns - 1
3120
3121	!
3122	!-- Get and compare the number of vertical levels
3123	nc_stat = NF90_INQ_VARID( id_set_sp, 'zu_sp', id_var_zu_sp )
3124	CALL handle_netcdf_error( 'netcdf', 298 )
3125
3126	nc_stat = NF90_INQUIRE_VARIABLE( id_set_sp, id_var_zu_sp, &
3127	dimids = id_dim_zu_sp_old )
3128	CALL handle_netcdf_error( 'netcdf', 299 )
3129	id_dim_zu_sp = id_dim_zu_sp_old(1)
3130
3131	nc_stat = NF90_INQUIRE_DIMENSION( id_set_sp, id_dim_zu_sp, &
3132	len = ns_old )
3133	CALL handle_netcdf_error( 'netcdf', 300 )
3134
3135	IF ( ns /= ns_old ) THEN
3136	message_string = 'NetCDF file for spectra ' // &
3137	' from previous run found,' // &
3138	'&but this file cannot be extended due to' // &
3139	' mismatch in number of' // &
3140	'&vertical levels.' // &
3141	'&New file is created instead.'
3142	CALL message( 'define_netcdf_header', 'PA0261', 0, 1, 0, 6, 0 )
3143	extend = .FALSE.
3144	RETURN
3145	ENDIF
3146
3147	!
3148	!-- Get and compare the heights of the cross sections
3149	ALLOCATE( netcdf_data(1:ns_old) )
3150
3151	nc_stat = NF90_GET_VAR( id_set_sp, id_var_zu_sp, netcdf_data )
3152	CALL handle_netcdf_error( 'netcdf', 301 )
3153
3154	DO i = 1, ns
3155	IF ( zu(comp_spectra_level(i)) /= netcdf_data(i) ) THEN
3156	message_string = 'NetCDF file for spectra ' // &
3157	' from previous run found,' // &
3158	'&but this file cannot be extended due to' // &
3159	' mismatch in heights of' // &
3160	'&vertical levels.' // &
3161	'&New file is created instead.'
3162	CALL message( 'define_netcdf_header', 'PA0262', 0, 1, 0, 6, 0 )
3163	extend = .FALSE.
3164	RETURN
3165	ENDIF
3166	ENDDO
3167
3168	DEALLOCATE( netcdf_data )
3169
3170	!
3171	!-- Get the id of the time coordinate (unlimited coordinate) and its
3172	!-- last index on the file. The next time level is plsp..count+1.
3173	!-- The current time must be larger than the last output time
3174	!-- on the file.
3175	nc_stat = NF90_INQ_VARID( id_set_sp, 'time', id_var_time_sp )
3176	CALL handle_netcdf_error( 'netcdf', 302 )
3177
3178	nc_stat = NF90_INQUIRE_VARIABLE( id_set_sp, id_var_time_sp, &
3179	dimids = id_dim_time_old )
3180	CALL handle_netcdf_error( 'netcdf', 303 )
3181	id_dim_time_sp = id_dim_time_old(1)
3182
3183	nc_stat = NF90_INQUIRE_DIMENSION( id_set_sp, id_dim_time_sp, &
3184	len = dosp_time_count )
3185	CALL handle_netcdf_error( 'netcdf', 304 )
3186
3187	nc_stat = NF90_GET_VAR( id_set_sp, id_var_time_sp, &
3188	last_time_coordinate, &
3189	start = (/ dosp_time_count /), &
3190	count = (/ 1 /) )
3191	CALL handle_netcdf_error( 'netcdf', 305 )
3192
3193	IF ( last_time_coordinate(1) >= simulated_time ) THEN
3194	message_string = 'NetCDF file for spectra ' // &
3195	'from previous run found,' // &
3196	'&but this file cannot be extended becaus' // &
3197	'e the current output time' // &
3198	'&is less or equal than the last output t' // &
3199	'ime on this file.' // &
3200	'&New file is created instead.'
3201	CALL message( 'define_netcdf_header', 'PA0263', 0, 1, 0, 6, 0 )
3202	dosp_time_count = 0
3203	extend = .FALSE.
3204	RETURN
3205	ENDIF
3206
3207	!
3208	!-- Dataset seems to be extendable.
3209	!-- Now get the variable ids.
3210	i = 1
3211	DO WHILE ( data_output_sp(i) /= ' ' .AND. i <= 10 )
3212
3213	IF ( INDEX( spectra_direction(i), 'x' ) /= 0 ) THEN
3214	netcdf_var_name = TRIM( data_output_sp(i) ) // '_x'
3215	nc_stat = NF90_INQ_VARID( id_set_sp, netcdf_var_name, &
3216	id_var_dospx(i) )
3217	CALL handle_netcdf_error( 'netcdf', 306 )
3218	ENDIF
3219
3220	IF ( INDEX( spectra_direction(i), 'y' ) /= 0 ) THEN
3221	netcdf_var_name = TRIM( data_output_sp(i) ) // '_y'
3222	nc_stat = NF90_INQ_VARID( id_set_sp, netcdf_var_name, &
3223	id_var_dospy(i) )
3224	CALL handle_netcdf_error( 'netcdf', 307 )
3225	ENDIF
3226
3227	i = i + 1
3228
3229	ENDDO
3230
3231	!
3232	!-- Change the title attribute on file
3233	IF ( averaging_interval_sp /= 0.0 ) THEN
3234	WRITE (time_average_text,'('', '',F7.1,'' s average'')') &
3235	averaging_interval_sp
3236	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'title', &
3237	TRIM( run_description_header ) // &
3238	TRIM( time_average_text ) )
3239	CALL handle_netcdf_error( 'netcdf', 308 )
3240
3241	WRITE ( time_average_text,'(F7.1,'' s avg'')' ) averaging_interval_sp
3242	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'time_avg', &
3243	TRIM( time_average_text ) )
3244	ELSE
3245	nc_stat = NF90_PUT_ATT( id_set_sp, NF90_GLOBAL, 'title', &
3246	TRIM( run_description_header ) )
3247	ENDIF
3248	CALL handle_netcdf_error( 'netcdf', 309 )
3249	message_string = 'NetCDF file for spectra ' // &
3250	'from previous run found.' // &
3251	'&This file will be extended.'
3252	CALL message( 'define_netcdf_header', 'PA0264', 0, 0, 0, 6, 0 )
3253
3254
3255	CASE ( 'pt_new' )
3256
3257	!
3258	!-- Define some global attributes of the dataset
3259	nc_stat = NF90_PUT_ATT( id_set_prt, NF90_GLOBAL, 'title', &
3260	TRIM( run_description_header ) )
3261	CALL handle_netcdf_error( 'netcdf', 310 )
3262
3263	!
3264	!-- Define time coordinate for particles (unlimited dimension)
3265	nc_stat = NF90_DEF_DIM( id_set_prt, 'time', NF90_UNLIMITED, &
3266	id_dim_time_prt )
3267	CALL handle_netcdf_error( 'netcdf', 311 )
3268
3269	nc_stat = NF90_DEF_VAR( id_set_prt, 'time', NF90_DOUBLE, &
3270	id_dim_time_prt, id_var_time_prt )
3271	CALL handle_netcdf_error( 'netcdf', 312 )
3272
3273	nc_stat = NF90_PUT_ATT( id_set_prt, id_var_time_prt, 'units', &
3274	'seconds' )
3275	CALL handle_netcdf_error( 'netcdf', 313 )
3276
3277	!
3278	!-- Define particle coordinate (maximum particle number)
3279	nc_stat = NF90_DEF_DIM( id_set_prt, 'particle_number', &
3280	maximum_number_of_particles, id_dim_prtnum )
3281	CALL handle_netcdf_error( 'netcdf', 314 )
3282
3283	nc_stat = NF90_DEF_VAR( id_set_prt, 'particle_number', NF90_DOUBLE, &
3284	id_dim_prtnum, id_var_prtnum )
3285	CALL handle_netcdf_error( 'netcdf', 315 )
3286
3287	nc_stat = NF90_PUT_ATT( id_set_prt, id_var_prtnum, 'units', &
3288	'particle number' )
3289	CALL handle_netcdf_error( 'netcdf', 316 )
3290
3291	!
3292	!-- Define variable which contains the real number of particles in use
3293	nc_stat = NF90_DEF_VAR( id_set_prt, 'real_num_of_prt', NF90_INT, &
3294	id_dim_time_prt, id_var_rnop_prt )
3295	CALL handle_netcdf_error( 'netcdf', 317 )
3296
3297	nc_stat = NF90_PUT_ATT( id_set_prt, id_var_rnop_prt, 'units', &
3298	'particle number' )
3299	CALL handle_netcdf_error( 'netcdf', 318 )
3300
3301	!
3302	!-- Define the variables
3303	DO i = 1, 17
3304
3305	nc_stat = NF90_DEF_VAR( id_set_prt, prt_var_names(i), &
3306	nc_precision(8), &
3307	(/ id_dim_prtnum, id_dim_time_prt /), &
3308	id_var_prt(i) )
3309	CALL handle_netcdf_error( 'netcdf', 319 )
3310
3311	nc_stat = NF90_PUT_ATT( id_set_prt, id_var_prt(i), &
3312	'long_name', TRIM( prt_var_names(i) ) )
3313	CALL handle_netcdf_error( 'netcdf', 320 )
3314
3315	nc_stat = NF90_PUT_ATT( id_set_prt, id_var_prt(i), &
3316	'units', TRIM( prt_var_units(i) ) )
3317	CALL handle_netcdf_error( 'netcdf', 321 )
3318
3319	ENDDO
3320
3321	!
3322	!-- Leave NetCDF define mode
3323	nc_stat = NF90_ENDDEF( id_set_prt )
3324	CALL handle_netcdf_error( 'netcdf', 322 )
3325
3326
3327	CASE ( 'pt_ext' )
3328
3329	!
3330	!-- Get the id of the time coordinate (unlimited coordinate) and its
3331	!-- last index on the file. The next time level is prt..count+1.
3332	!-- The current time must be larger than the last output time
3333	!-- on the file.
3334	nc_stat = NF90_INQ_VARID( id_set_prt, 'time', id_var_time_prt )
3335	CALL handle_netcdf_error( 'netcdf', 323 )
3336
3337	nc_stat = NF90_INQUIRE_VARIABLE( id_set_prt, id_var_time_prt, &
3338	dimids = id_dim_time_old )
3339	CALL handle_netcdf_error( 'netcdf', 324 )
3340	id_dim_time_prt = id_dim_time_old(1)
3341
3342	nc_stat = NF90_INQUIRE_DIMENSION( id_set_prt, id_dim_time_prt, &
3343	len = prt_time_count )
3344	CALL handle_netcdf_error( 'netcdf', 325 )
3345
3346	nc_stat = NF90_GET_VAR( id_set_prt, id_var_time_prt, &
3347	last_time_coordinate, &
3348	start = (/ prt_time_count /), &
3349	count = (/ 1 /) )
3350	CALL handle_netcdf_error( 'netcdf', 326 )
3351
3352	IF ( last_time_coordinate(1) >= simulated_time ) THEN
3353	message_string = 'NetCDF file for particles ' // &
3354	'from previous run found,' // &
3355	'&but this file cannot be extended becaus' // &
3356	'e the current output time' // &
3357	'&is less or equal than the last output t' // &
3358	'ime on this file.' // &
3359	'&New file is created instead.'
3360	CALL message( 'define_netcdf_header', 'PA0265', 0, 1, 0, 6, 0 )
3361	prt_time_count = 0
3362	extend = .FALSE.
3363	RETURN
3364	ENDIF
3365
3366	!
3367	!-- Dataset seems to be extendable.
3368	!-- Now get the variable ids.
3369	nc_stat = NF90_INQ_VARID( id_set_prt, 'real_num_of_prt', &
3370	id_var_rnop_prt )
3371	CALL handle_netcdf_error( 'netcdf', 327 )
3372
3373	DO i = 1, 17
3374
3375	nc_stat = NF90_INQ_VARID( id_set_prt, prt_var_names(i), &
3376	id_var_prt(i) )
3377	CALL handle_netcdf_error( 'netcdf', 328 )
3378
3379	ENDDO
3380
3381	message_string = 'NetCDF file for particles ' // &
3382	'from previous run found.' // &
3383	'&This file will be extended.'
3384	CALL message( 'define_netcdf_header', 'PA0266', 0, 0, 0, 6, 0 )
3385
3386
3387
3388	CASE ( 'ps_new' )
3389
3390	!
3391	!-- Define some global attributes of the dataset
3392	nc_stat = NF90_PUT_ATT( id_set_pts, NF90_GLOBAL, 'title', &
3393	TRIM( run_description_header ) )
3394	CALL handle_netcdf_error( 'netcdf', 396 )
3395
3396	!
3397	!-- Define time coordinate for particle time series (unlimited dimension)
3398	nc_stat = NF90_DEF_DIM( id_set_pts, 'time', NF90_UNLIMITED, &
3399	id_dim_time_pts )
3400	CALL handle_netcdf_error( 'netcdf', 397 )
3401
3402	nc_stat = NF90_DEF_VAR( id_set_pts, 'time', NF90_DOUBLE, &
3403	id_dim_time_pts, id_var_time_pts )
3404	CALL handle_netcdf_error( 'netcdf', 398 )
3405
3406	nc_stat = NF90_PUT_ATT( id_set_pts, id_var_time_pts, 'units', &
3407	'seconds')
3408	CALL handle_netcdf_error( 'netcdf', 399 )
3409
3410	!
3411	!-- Define the variables. If more than one particle group is defined,
3412	!-- define seperate variables for each group
3413	var_list = ';'
3414	DO i = 1, dopts_num
3415
3416	!
3417	!-- First, remove those characters not allowed by NetCDF
3418	netcdf_var_name = dopts_label(i)
3419	CALL clean_netcdf_varname( netcdf_var_name )
3420
3421	DO j = 0, number_of_particle_groups
3422
3423	IF ( j == 0 ) THEN
3424	suffix1 = ''
3425	ELSE
3426	WRITE ( suffix1, '(''_'',I2.2)' ) j
3427	ENDIF
3428
3429	nc_stat = NF90_DEF_VAR( id_set_pts, &
3430	TRIM( netcdf_var_name ) // suffix1, &
3431	nc_precision(6), &
3432	(/ id_dim_time_pts /), &
3433	id_var_dopts(i,j) )
3434	CALL handle_netcdf_error( 'netcdf', 400 )
3435
3436	IF ( j == 0 ) THEN
3437	nc_stat = NF90_PUT_ATT( id_set_pts, id_var_dopts(i,j), &
3438	'long_name', &
3439	TRIM( dopts_label(i) ) )
3440	ELSE
3441	nc_stat = NF90_PUT_ATT( id_set_pts, id_var_dopts(i,j), &
3442	'long_name', &
3443	TRIM( dopts_label(i) ) // ' PG ' // &
3444	suffix1(2:3) )
3445	ENDIF
3446	CALL handle_netcdf_error( 'netcdf', 401 )
3447
3448	nc_stat = NF90_PUT_ATT( id_set_pts, id_var_dopts(i,j), &
3449	'units', TRIM( dopts_unit(i) ) )
3450	CALL handle_netcdf_error( 'netcdf', 402 )
3451
3452	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // &
3453	suffix1 // ';'
3454
3455	IF ( number_of_particle_groups == 1 ) EXIT
3456
3457	ENDDO
3458
3459	ENDDO
3460
3461	!
3462	!-- Write the list of variables as global attribute (this is used by
3463	!-- restart runs)
3464	nc_stat = NF90_PUT_ATT( id_set_pts, NF90_GLOBAL, 'VAR_LIST', &
3465	var_list )
3466	CALL handle_netcdf_error( 'netcdf', 403 )
3467
3468
3469	!
3470	!-- Leave NetCDF define mode
3471	nc_stat = NF90_ENDDEF( id_set_pts )
3472	CALL handle_netcdf_error( 'netcdf', 404 )
3473
3474
3475	CASE ( 'ps_ext' )
3476
3477	!
3478	!-- Get the list of variables and compare with the actual run.
3479	!-- First var_list_old has to be reset, since GET_ATT does not assign
3480	!-- trailing blanks.
3481	var_list_old = ' '
3482	nc_stat = NF90_GET_ATT( id_set_pts, NF90_GLOBAL, 'VAR_LIST', &
3483	var_list_old )
3484	CALL handle_netcdf_error( 'netcdf', 405 )
3485
3486	var_list = ';'
3487	i = 1
3488	DO i = 1, dopts_num
3489
3490	netcdf_var_name = dopts_label(i)
3491	CALL clean_netcdf_varname( netcdf_var_name )
3492
3493	DO j = 0, number_of_particle_groups
3494
3495	IF ( j == 0 ) THEN
3496	suffix1 = ''
3497	ELSE
3498	WRITE ( suffix1, '(''_'',I2.2)' ) j
3499	ENDIF
3500
3501	var_list = TRIM(var_list) // TRIM(netcdf_var_name) // &
3502	suffix1 // ';'
3503
3504	IF ( number_of_particle_groups == 1 ) EXIT
3505
3506	ENDDO
3507
3508	ENDDO
3509
3510	IF ( TRIM( var_list ) /= TRIM( var_list_old ) ) THEN
3511	message_string = 'NetCDF file for particle time series ' // &
3512	'from previous run found,' // &
3513	'& but this file cannot be extended due to' // &
3514	' variable mismatch.' // &
3515	'&New file is created instead.'
3516	CALL message( 'define_netcdf_header', 'PA0267', 0, 1, 0, 6, 0 )
3517	extend = .FALSE.
3518	RETURN
3519	ENDIF
3520
3521	!
3522	!-- Get the id of the time coordinate (unlimited coordinate) and its
3523	!-- last index on the file. The next time level is dots..count+1.
3524	!-- The current time must be larger than the last output time
3525	!-- on the file.
3526	nc_stat = NF90_INQ_VARID( id_set_pts, 'time', id_var_time_pts )
3527	CALL handle_netcdf_error( 'netcdf', 406 )
3528
3529	nc_stat = NF90_INQUIRE_VARIABLE( id_set_pts, id_var_time_pts, &
3530	dimids = id_dim_time_old )
3531	CALL handle_netcdf_error( 'netcdf', 407 )
3532	id_dim_time_pts = id_dim_time_old(1)
3533
3534	nc_stat = NF90_INQUIRE_DIMENSION( id_set_pts, id_dim_time_pts, &
3535	len = dopts_time_count )
3536	CALL handle_netcdf_error( 'netcdf', 408 )
3537
3538	nc_stat = NF90_GET_VAR( id_set_pts, id_var_time_pts, &
3539	last_time_coordinate, &
3540	start = (/ dopts_time_count /), &
3541	count = (/ 1 /) )
3542	CALL handle_netcdf_error( 'netcdf', 409 )
3543
3544	IF ( last_time_coordinate(1) >= simulated_time ) THEN
3545	message_string = 'NetCDF file for particle time series ' // &
3546	'from previous run found,' // &
3547	'&but this file cannot be extended becaus' // &
3548	'e the current output time' // &
3549	'&is less or equal than the last output t' // &
3550	'ime on this file.' // &
3551	'&New file is created instead.'
3552	CALL message( 'define_netcdf_header', 'PA0268', 0, 1, 0, 6, 0 )
3553	dopts_time_count = 0
3554	extend = .FALSE.
3555	RETURN
3556	ENDIF
3557
3558	!
3559	!-- Dataset seems to be extendable.
3560	!-- Now get the variable ids
3561	i = 1
3562	DO i = 1, dopts_num
3563
3564	netcdf_var_name_base = dopts_label(i)
3565	CALL clean_netcdf_varname( netcdf_var_name_base )
3566
3567	DO j = 0, number_of_particle_groups
3568
3569	IF ( j == 0 ) THEN
3570	suffix1 = ''
3571	ELSE
3572	WRITE ( suffix1, '(''_'',I2.2)' ) j
3573	ENDIF
3574
3575	netcdf_var_name = TRIM( netcdf_var_name_base ) // suffix1
3576
3577	nc_stat = NF90_INQ_VARID( id_set_pts, netcdf_var_name, &
3578	id_var_dopts(i,j) )
3579	CALL handle_netcdf_error( 'netcdf', 410 )
3580
3581	IF ( number_of_particle_groups == 1 ) EXIT
3582
3583	ENDDO
3584
3585	ENDDO
3586
3587	!
3588	!-- Change the title attribute on file
3589	nc_stat = NF90_PUT_ATT( id_set_pts, NF90_GLOBAL, 'title', &
3590	TRIM( run_description_header ) )
3591	CALL handle_netcdf_error( 'netcdf', 411 )
3592	message_string = 'NetCDF file for particle time series ' // &
3593	'from previous run found.' // &
3594	'&This file will be extended.'
3595	CALL message( 'define_netcdf_header', 'PA0269', 0, 0, 0, 6, 0 )
3596
3597
3598	CASE DEFAULT
3599
3600	message_string = 'mode "' // TRIM( mode) // '" not supported'
3601	CALL message( 'define_netcdf_header', 'PA0270', 0, 0, 0, 6, 0 )
3602
3603	END SELECT
3604
3605	#endif
3606	END SUBROUTINE define_netcdf_header
3607
3608
3609	SUBROUTINE handle_netcdf_error( routine_name, errno )
3610	#if defined( __netcdf )
3611
3612	!------------------------------------------------------------------------------!
3613	!
3614	! Description:
3615	! ------------
3616	! Prints out a text message corresponding to the current status.
3617	!------------------------------------------------------------------------------!
3618
3619	USE control_parameters
3620	USE netcdf
3621	USE netcdf_control
3622	USE pegrid
3623
3624	IMPLICIT NONE
3625
3626	CHARACTER(LEN=6) :: message_identifier
3627	CHARACTER(LEN=*) :: routine_name
3628
3629	INTEGER :: errno
3630
3631	IF ( nc_stat /= NF90_NOERR ) THEN
3632
3633	WRITE( message_identifier, '(''NC'',I4.4)' ) errno
3634	message_string = TRIM( NF90_STRERROR( nc_stat ) )
3635
3636	CALL message( routine_name, message_identifier, 2, 2, 0, 6, 1 )
3637
3638	ENDIF
3639
3640	#endif
3641	END SUBROUTINE handle_netcdf_error
3642
3643
3644
3645	SUBROUTINE clean_netcdf_varname( string )
3646	#if defined( __netcdf )
3647
3648	!------------------------------------------------------------------------------!
3649	!
3650	! Description:
3651	! ------------
3652	! Replace those characters in string which are not allowed by NetCDF.
3653	!------------------------------------------------------------------------------!
3654
3655	USE netcdf_control
3656
3657	IMPLICIT NONE
3658
3659	CHARACTER (LEN=10), INTENT(INOUT) :: string
3660
3661	INTEGER :: i, ic
3662
3663	DO i = 1, replace_num
3664	DO
3665	ic = INDEX( string, replace_char(i) )
3666	IF ( ic /= 0 ) THEN
3667	string(ic:ic) = replace_by(i)
3668	ELSE
3669	EXIT
3670	ENDIF
3671	ENDDO
3672	ENDDO
3673
3674	#endif
3675	END SUBROUTINE clean_netcdf_varname

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |