Home

Context Navigation

modules.f90 @ 141

Last change on this file since 141 was 139, checked in by raasch, 17 years ago

New:
---

Plant canopy model of Watanabe (2004,BLM 112,307-341) added.
It can be switched on by the inipar parameter plant_canopy.
The inipar parameter canopy_mode can be used to prescribe a
plant canopy type. The default case is a homogeneous plant
canopy. Heterogeneous distributions of the leaf area
density and the canopy drag coefficient can be defined in the
new routine user_init_plant_canopy (user_interface).
The inipar parameters lad_surface, lad_vertical_gradient and
lad_vertical_gradient_level can be used in order to
prescribe the vertical profile of leaf area density. The
inipar parameter drag_coefficient determines the canopy
drag coefficient.
Finally, the inipar parameter pch_index determines the
index of the upper boundary of the plant canopy.

Allow new case bc_uv_t = 'dirichlet_0' for channel flow.

For unknown variables (CASE DEFAULT) call new subroutine user_data_output_dvrp

Pressure boundary conditions for vertical walls added to the multigrid solver.
They are applied using new wall flag arrays (wall_flags_..) which are defined
for each grid level. New argument gls added to routine user_init_grid
(user_interface).

Frequence of sorting particles can be controlled with new particles_par
parameter dt_sort_particles. Sorting is moved from the SGS timestep loop in
advec_particles after the end of this loop.

advec_particles, check_parameters, data_output_dvrp, header, init_3d_model, init_grid, init_particles, init_pegrid, modules, package_parin, parin, plant_canopy_model, read_var_list, read_3d_binary, user_interface, write_var_list, write_3d_binary

Changed:

Redefine initial nzb_local as the actual total size of topography (later the
extent of topography in nzb_local is reduced by 1dx at the E topography walls
and by 1dy at the N topography walls to form the basis for nzb_s_inner);
for consistency redefine 'single_building' case.

Vertical profiles now based on nzb_s_inner; they are divided by
ngp_2dh_s_inner (scalars, procucts of scalars) and ngp_2dh (staggered velocity
components and their products, procucts of scalars and velocity components),
respectively.

Allow two instead of one digit to specify isosurface and slicer variables.

Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d (check_open)

prognostic_equations include the respective wall_*flux in the parameter list of
calls of diffusion_s. Same as before, only the values of wall_heatflux(0:4)
can be assigned. At present, wall_humidityflux, wall_qflux, wall_salinityflux,
and wall_scalarflux are kept zero. diffusion_s uses the respective wall_*flux
instead of wall_heatflux. This update serves two purposes:

it avoids errors in calculations with humidity/scalar/salinity and prescribed

non-zero wall_heatflux,

it prepares PALM for a possible assignment of wall fluxes of

humidity/scalar/salinity in a future release.

buoyancy, check_open, data_output_dvrp, diffusion_s, diffusivities, flow_statistics, header, init_3d_model, init_dvrp, init_grid, modules, prognostic_equations

Errors:

Bugfix: summation of sums_l_l in diffusivities.

Several bugfixes in the ocean part: Initial density rho is calculated
(init_ocean). Error in initializing u_init and v_init removed
(check_parameters). Calculation of density flux now starts from
nzb+1 (production_e).

Bugfix: pleft/pright changed to pnorth/psouth in sendrecv of particle tail
numbers along y, small bugfixes in the SGS part (advec_particles)

Bugfix: model_string needed a default value (combine_plot_fields)

Bugfix: wavenumber calculation for even nx in routines maketri (poisfft)

Bugfix: assignment of fluxes at walls

Bugfix: absolute value of f must be used when calculating the Blackadar mixing length (init_1d_model)

advec_particles, check_parameters, combine_plot_fields, diffusion_s, diffusivities, init_ocean, init_1d_model, poisfft, production_e

Property svn:keywords set to Id

File size: 48.6 KB

Line
1	MODULE advection
2
3
4	!------------------------------------------------------------------------------!
5	! Actual revisions:
6	! -----------------
7	!
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: modules.f90 139 2007-11-29 09:37:41Z raasch $
12	!
13	! 138 2007-11-28 10:03:58Z letzel
14	! +drag_coefficient, pch_index, lad_surface, lad_vertical_gradient,
15	! lad_vertical_gradient_level, plant_canopy, lad, lad_s, lad_u, lad_v,
16	! lad_w, cdc, lad_vertical_gradient_level_ind, canopy_mode
17	! +dt_sort_particles, ngp_2dh_s_inner, time_sort_particles, flags,
18	! wall_flags_1..10, wall_humidityflux(0:4), wall_qflux(0:4),
19	! wall_salinityflux(0:4), wall_scalarflux(0:4)
20	!
21	! 108 2007-08-24 15:10:38Z letzel
22	! +comm_inter, constant_top_momentumflux, coupling_char, coupling_mode,
23	! coupling_mode_remote, c_u, c_v, c_w, dt_coupling, e_init, humidity_remote,
24	! ngp_xy, nxlu, nysv, port_name, qswst_remote, terminate_coupled,
25	! terminate_coupled_remote, time_coupling, top_momentumflux_u\|v, type_xy,
26	! uswst, vswst
27	!
28	! 97 2007-06-21 08:23:15Z raasch
29	! +atmos_ocean_sign, ocean, r, + salinity variables
30	! defaults of .._vertical_gradient_levels changed from -1.0 to -9999999.9
31	! hydro_press renamed hyp, use_pt_reference renamed use_reference
32	!
33	! 89 2007-05-25 12:08:31Z raasch
34	! +data_output_pr_user, max_pr_user, size of data_output_pr, dopr_index,
35	! dopr_initial_index and dopr_unit enlarged,
36	! var_hom and var_sum renamed pr_palm
37	!
38	! 82 2007-04-16 15:40:52Z raasch
39	! +return_addres, return_username
40	! Cpp-directive lcmuk renamed lc
41	!
42	! 75 2007-03-22 09:54:05Z raasch
43	! +arrays precipitation_amount, precipitation_rate, precipitation_rate_av,
44	! rif_wall, z0_av, +arrays u_m_l, u_m_r, etc. for radiation boundary conditions,
45	! +loop_optimization, netcdf_64bit_3d, zu_s_inner, zw_w_inner, id_var_zusi_*,
46	! id_var_zwwi_*, ts_value, u_nzb_p1_for_vfc, v_nzb_p1_for_vfc, pt_reference,
47	! use_pt_reference, precipitation_amount_interval, revision
48	! +age_m in particle_type, moisture renamed humidity,
49	! -data_output_ts, dots_n, uvmean_outflow, uxrp, vynp,
50	! arrays dots_label and dots_unit now dimensioned with dots_max,
51	! setting of palm version moved to main program
52	!
53	! 37 2007-03-01 08:33:54Z raasch
54	! +constant_top_heatflux, top_heatflux, use_top_fluxes, +arrays for top fluxes,
55	! +nzt_diff, default of bc_pt_t renamed "initial_gradient"
56	! Bugfix: p is not a pointer
57	!
58	! RCS Log replace by Id keyword, revision history cleaned up
59	!
60	! Revision 1.95 2007/02/11 13:18:30 raasch
61	! version 3.1b (last under RCS control)
62	!
63	! Revision 1.1 1997/07/24 11:21:26 raasch
64	! Initial revision
65	!
66	!
67	! Description:
68	! ------------
69	! Definition of variables for special advection schemes
70	!------------------------------------------------------------------------------!
71
72	REAL :: spl_gamma_x, spl_gamma_y
73
74	REAL, DIMENSION(:), ALLOCATABLE :: aex, bex, dex, eex, spl_z_x, spl_z_y
75	REAL, DIMENSION(:,:), ALLOCATABLE :: spl_tri_x, spl_tri_y, spl_tri_zu, &
76	spl_tri_zw
77
78	SAVE
79
80	END MODULE advection
81
82
83
84
85	MODULE array_kind
86
87	!------------------------------------------------------------------------------!
88	! Description:
89	! ------------
90	! Definition of type parameters (used for the definition of single or double
91	! precision variables)
92	!------------------------------------------------------------------------------!
93
94	INTEGER, PARAMETER :: dpk = SELECTED_REAL_KIND( 12 ), &
95	spk = SELECTED_REAL_KIND( 6 )
96
97	SAVE
98
99	END MODULE array_kind
100
101
102
103
104	MODULE arrays_3d
105
106	!------------------------------------------------------------------------------!
107	! Description:
108	! ------------
109	! Definition of all arrays defined on the computational grid
110	!------------------------------------------------------------------------------!
111
112	USE array_kind
113
114	REAL, DIMENSION(:), ALLOCATABLE :: &
115	ddzu, dd2zu, dzu, ddzw, dzw, hyp, km_damp_x, km_damp_y, lad, l_grid, &
116	pt_init, q_init, rdf, sa_init, ug, u_init, u_nzb_p1_for_vfc, vg, &
117	v_init, v_nzb_p1_for_vfc, zu, zw
118
119	REAL, DIMENSION(:,:), ALLOCATABLE :: &
120	c_u, c_v, c_w, dzu_mg, dzw_mg, f1_mg, f2_mg, f3_mg, pt_slope_ref, &
121	qs, qswst_remote, ts, us, z0
122
123	REAL, DIMENSION(:,:), ALLOCATABLE, TARGET :: &
124	qsws_1, qsws_2, qswst_1, qswst_2, rif_1, rif_2, saswsb_1, saswst_1, &
125	shf_1, shf_2, tswst_1, tswst_2, usws_1, usws_2, uswst_1, uswst_2, &
126	vsws_1, vsws_2, vswst_1, vswst_2
127
128	REAL, DIMENSION(:,:), POINTER :: &
129	qsws, qsws_m, qswst, qswst_m, rif, rif_m, saswsb, saswst, shf, &
130	shf_m, tswst, tswst_m, usws, uswst, usws_m, uswst_m, vsws, vswst, &
131	vsws_m, vswst_m
132
133	REAL, DIMENSION(:,:,:), ALLOCATABLE :: &
134	cdc, d, diss, lad_s, lad_u, lad_v, lad_w, l_wall, tend, &
135	u_m_l, u_m_n, u_m_r, u_m_s, v_m_l, v_m_n, v_m_r, v_m_s, w_m_l, &
136	w_m_n, w_m_r, w_m_s
137
138	REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: &
139	ql_v, ql_vp
140
141	REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: &
142	e_1, e_2, e_3, kh_1, kh_2, km_1, km_2, p, pt_1, pt_2, pt_3, q_1, &
143	q_2, q_3, ql_1, ql_2, rho_1, sa_1, sa_2, sa_3, u_1, u_2, u_3, v_1, &
144	v_2, v_3, vpt_1, vpt_2, w_1, w_2, w_3
145
146	REAL, DIMENSION(:,:,:), POINTER :: &
147	e, e_m, e_p, kh, kh_m, km, km_m, pt, pt_m, pt_p, q, q_m, q_p, ql, &
148	ql_c, rho, sa, sa_p, te_m, tpt_m, tq_m, tsa_m, tu_m, tv_m, tw_m, u, &
149	u_m, u_p, v, v_m, v_p, vpt, vpt_m, w, w_m, w_p
150
151	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: rif_wall
152
153	SAVE
154
155	END MODULE arrays_3d
156
157
158
159
160	MODULE averaging
161
162	!------------------------------------------------------------------------------!
163	! Description:
164	! ------------
165	! Definition of variables needed for time-averaging of 2d/3d data
166	!------------------------------------------------------------------------------!
167
168	REAL, DIMENSION(:,:), ALLOCATABLE :: lwp_av, precipitation_rate_av, &
169	ts_av, us_av, z0_av
170
171	REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: &
172	e_av, p_av, pc_av, pr_av, pt_av, q_av, ql_av, ql_c_av, ql_v_av, &
173	ql_vp_av, qv_av, rho_av, s_av, sa_av, u_av, v_av, vpt_av, w_av
174
175	END MODULE averaging
176
177
178
179
180	MODULE cloud_parameters
181
182	!------------------------------------------------------------------------------!
183	! Description:
184	! ------------
185	! Definition of variables and constants for cloud physics
186	!------------------------------------------------------------------------------!
187
188	REAL :: b_cond, cp = 1005.0, diff_coeff_l = 0.23E-4, &
189	effective_coll_efficiency, l_d_cp, l_d_r, l_d_rv, l_v = 2.5E+06, &
190	mass_of_solute, molecular_weight_of_solute, &
191	prec_time_const = 0.001, ql_crit = 0.0005, rho_l = 1.0E3, &
192	r_d = 287.0, r_v = 461.51, thermal_conductivity_l = 2.43E-2
193
194	REAL, DIMENSION(:), ALLOCATABLE :: pt_d_t, t_d_pt
195
196	REAL, DIMENSION(:,:), ALLOCATABLE :: precipitation_amount, &
197	precipitation_rate
198
199	SAVE
200
201	END MODULE cloud_parameters
202
203
204
205
206	MODULE constants
207
208	!------------------------------------------------------------------------------!
209	! Description:
210	! ------------
211	! Definition of general constants
212	!------------------------------------------------------------------------------!
213
214	REAL :: pi = 3.141592654
215
216	SAVE
217
218	END MODULE constants
219
220
221
222
223	MODULE control_parameters
224
225	!------------------------------------------------------------------------------!
226	! Description:
227	! ------------
228	! Definition of parameters for program control
229	!------------------------------------------------------------------------------!
230
231	TYPE plot_precision
232	CHARACTER (LEN=6) :: variable
233	INTEGER :: precision
234	END TYPE plot_precision
235
236	TYPE(plot_precision), DIMENSION(100) :: plot_3d_precision = &
237	(/ plot_precision( 'u', 2 ), plot_precision( 'v', 2 ), &
238	plot_precision( 'w', 2 ), plot_precision( 'p', 5 ), &
239	plot_precision( 'pt', 2 ), &
240	( plot_precision( ' ', 1 ), i9 = 1,95 ) /)
241
242	TYPE file_status
243	LOGICAL :: opened, opened_before
244	END TYPE file_status
245
246	TYPE(file_status), DIMENSION(200) :: openfile = file_status(.FALSE.,.FALSE.)
247
248
249	CHARACTER (LEN=1) :: cycle_mg = 'w', timestep_reason = ' '
250	CHARACTER (LEN=2) :: coupling_char = ''
251	CHARACTER (LEN=5) :: write_binary = 'false'
252	CHARACTER (LEN=6) :: grid_matching = 'match'
253	CHARACTER (LEN=8) :: run_date, run_time
254	CHARACTER (LEN=9) :: simulated_time_chr
255	CHARACTER (LEN=12) :: version = ' ', revision = ' '
256	CHARACTER (LEN=16) :: loop_optimization = 'default', &
257	momentum_advec = 'pw-scheme', &
258	psolver = 'poisfft', &
259	scalar_advec = 'pw-scheme'
260	CHARACTER (LEN=20) :: bc_e_b = 'neumann', bc_lr = 'cyclic', &
261	bc_ns = 'cyclic', bc_p_b = 'neumann', &
262	bc_p_t = 'dirichlet', bc_pt_b = 'dirichlet', &
263	bc_pt_t = 'initial_gradient', &
264	bc_q_b = 'dirichlet', bc_q_t = 'neumann', &
265	bc_s_b = 'dirichlet', bc_s_t = 'neumann', &
266	bc_sa_t = 'neumann', &
267	bc_uv_b = 'dirichlet', bc_uv_t = 'dirichlet', &
268	canopy_mode = 'block', &
269	coupling_mode = 'uncoupled', &
270	coupling_mode_remote = 'uncoupled', &
271	dissipation_1d = 'as_in_3d_model', &
272	fft_method = 'system-specific', &
273	mixing_length_1d = 'as_in_3d_model', &
274	random_generator = 'numerical-recipes', &
275	return_addres, return_username, &
276	timestep_scheme = 'runge-kutta-3'
277	CHARACTER (LEN=40) :: avs_data_file, topography = 'flat'
278	CHARACTER (LEN=64) :: host
279	CHARACTER (LEN=80) :: log_message, run_identifier
280	CHARACTER (LEN=100) :: initializing_actions = ' ', run_description_header
281
282	CHARACTER (LEN=7), DIMENSION(100) :: do3d_comp_prec = ' '
283	CHARACTER (LEN=10), DIMENSION(10) :: data_output_format = ' '
284	CHARACTER (LEN=10), DIMENSION(100) :: data_output = ' ', &
285	data_output_user = ' ', doav = ' '
286	CHARACTER (LEN=10), DIMENSION(300) :: data_output_pr = ' '
287	CHARACTER (LEN=10), DIMENSION(200) :: data_output_pr_user = ' '
288	CHARACTER (LEN=20), DIMENSION(10) :: netcdf_precision = ' '
289
290	CHARACTER (LEN=10), DIMENSION(0:1,100) :: do2d = ' ', do3d = ' '
291
292	INTEGER :: average_count_pr = 0, average_count_sp = 0, &
293	average_count_3d = 0, current_timestep_number = 0, &
294	dist_range = 0, disturbance_level_ind_b, &
295	disturbance_level_ind_t, doav_n = 0, dopr_n = 0, &
296	dopr_time_count = 0, dopts_time_count = 0, &
297	dosp_time_count = 0, dots_time_count = 0, &
298	do2d_xy_n = 0, do2d_xz_n = 0, do2d_yz_n = 0, do3d_avs_n = 0, &
299	dvrp_filecount = 0, dz_stretch_level_index, gamma_mg, &
300	grid_level, ibc_e_b, ibc_p_b, ibc_p_t, ibc_pt_b, ibc_pt_t, &
301	ibc_q_b, ibc_q_t, ibc_sa_t, ibc_uv_b, ibc_uv_t, &
302	inflow_disturbance_begin = -1, inflow_disturbance_end = -1, &
303	intermediate_timestep_count, intermediate_timestep_count_max, &
304	iran = -1234567, last_dt_change = 0, maximum_grid_level, &
305	max_pr_user = 0, mgcycles = 0, mg_cycles = -1, &
306	mg_switch_to_pe0_level = 0, ngsrb = 2, nsor = 20, &
307	nsor_ini = 100, n_sor, normalizing_region = 0, &
308	nz_do1d, nz_do3d = -9999, outflow_damping_width = -1, &
309	prt_time_count = 0, runnr = 0, skip_do_avs = 0, &
310	terminate_coupled = 0, terminate_coupled_remote = 0, &
311	timestep_count = 0
312
313	INTEGER :: dist_nxl(0:1), dist_nxr(0:1), dist_nyn(0:1), dist_nys(0:1), &
314	do2d_no(0:1) = 0, do2d_xy_time_count(0:1), &
315	do2d_xz_time_count(0:1), do2d_yz_time_count(0:1), &
316	do3d_no(0:1) = 0, do3d_time_count(0:1), &
317	lad_vertical_gradient_level_ind(10) = -9999, &
318	pch_index = 0, &
319	pt_vertical_gradient_level_ind(10) = -9999, &
320	q_vertical_gradient_level_ind(10) = -9999, &
321	sa_vertical_gradient_level_ind(10) = -9999, &
322	section(100,3), section_xy(100) = -9999, &
323	section_xz(100) = -9999, section_yz(100) = -9999, &
324	ug_vertical_gradient_level_ind(10) = -9999, &
325	vg_vertical_gradient_level_ind(10) = -9999
326
327	INTEGER, DIMENSION(:), ALLOCATABLE :: grid_level_count
328
329	LOGICAL :: adjust_mixing_length = .FALSE., avs_output = .FALSE., &
330	call_psolver_at_all_substeps = .TRUE., &
331	cloud_droplets = .FALSE., cloud_physics = .FALSE., &
332	conserve_volume_flow = .FALSE., constant_diffusion = .FALSE., &
333	constant_heatflux = .TRUE., constant_top_heatflux = .TRUE., &
334	constant_top_momentumflux = .FALSE., &
335	constant_top_salinityflux = .TRUE., &
336	constant_waterflux = .TRUE., create_disturbances = .TRUE., &
337	cut_spline_overshoot = .TRUE., &
338	data_output_2d_on_each_pe = .TRUE., do2d_at_begin = .FALSE., &
339	do3d_at_begin = .FALSE., do3d_compress = .FALSE., &
340	do_sum = .FALSE., dt_changed = .FALSE., dt_fixed = .FALSE., &
341	disturbance_created = .FALSE., &
342	first_call_advec_particles = .TRUE., &
343	force_print_header = .FALSE., galilei_transformation = .FALSE.,&
344	humidity = .FALSE., humidity_remote = .FALSE., &
345	inflow_l = .FALSE., inflow_n = .FALSE., &
346	inflow_r = .FALSE., inflow_s = .FALSE., iso2d_output = .FALSE.,&
347	mg_switch_to_pe0 = .FALSE., &
348	netcdf_output = .FALSE., netcdf_64bit = .FALSE., &
349	netcdf_64bit_3d = .TRUE., ocean = .FALSE., &
350	outflow_l = .FALSE., outflow_n = .FALSE., outflow_r = .FALSE., &
351	outflow_s = .FALSE., passive_scalar = .FALSE., &
352	plant_canopy = .FALSE., &
353	prandtl_layer = .TRUE., precipitation = .FALSE., &
354	profil_output = .FALSE., radiation = .FALSE., &
355	random_heatflux = .FALSE., run_control_header = .FALSE., &
356	sloping_surface = .FALSE., stop_dt = .FALSE., &
357	terminate_run = .FALSE., use_prior_plot1d_parameters = .FALSE.,&
358	use_reference = .FALSE., use_surface_fluxes = .FALSE., &
359	use_top_fluxes = .FALSE., use_ug_for_galilei_tr = .TRUE., &
360	use_upstream_for_tke = .FALSE., wall_adjustment = .TRUE.
361
362	LOGICAL :: data_output_xy(0:1) = .FALSE., data_output_xz(0:1) = .FALSE., &
363	data_output_yz(0:1) = .FALSE.
364
365	REAL :: advected_distance_x = 0.0, advected_distance_y = 0.0, &
366	alpha_surface = 0.0, asselin_filter_factor = 0.1, &
367	atmos_ocean_sign = 1.0, &
368	averaging_interval = 0.0, averaging_interval_pr = 9999999.9, &
369	averaging_interval_sp = 9999999.9, bc_pt_t_val, bc_q_t_val, &
370	bottom_salinityflux = 0.0, &
371	building_height = 50.0, building_length_x = 50.0, &
372	building_length_y = 50.0, building_wall_left = 9999999.9, &
373	building_wall_south = 9999999.9, cfl_factor = -1.0, &
374	cos_alpha_surface, disturbance_amplitude = 0.25, &
375	disturbance_energy_limit = 0.01, &
376	disturbance_level_b = -9999999.9, &
377	disturbance_level_t = -9999999.9, &
378	drag_coefficient = 0.0, &
379	dt = -1.0, dt_averaging_input = 0.0, &
380	dt_averaging_input_pr = 9999999.9, dt_coupling = 9999999.9, &
381	dt_data_output = 9999999.9, &
382	dt_data_output_av = 9999999.9, dt_disturb = 9999999.9, &
383	dt_dopr = 9999999.9, dt_dopr_listing = 9999999.9, &
384	dt_dopts = 9999999.9, dt_dosp = 9999999.9, dt_dots = 9999999.9, &
385	dt_do2d_xy = 9999999.9, dt_do2d_xz = 9999999.9, &
386	dt_do2d_yz = 9999999.9, dt_do3d = 9999999.9, dt_dvrp = 9999999.9, &
387	dt_max = 20.0, dt_prel = 9999999.9, dt_restart = 9999999.9, &
388	dt_run_control = 60.0, dt_3d = -1.0, dz = -1.0, &
389	dz_max = 9999999.9, dz_stretch_factor = 1.08, &
390	dz_stretch_level = 100000.0, e_init = 0.0, e_min = 0.0, &
391	end_time = 0.0, &
392	f = 0.0, fs = 0.0, g = 9.81, kappa = 0.4, km_constant = -1.0, &
393	km_damp_max = -1.0, lad_surface = 0.0, long_filter_factor = 0.0, &
394	maximum_cpu_time_allowed = 0.0, molecular_viscosity = 1.461E-5, &
395	old_dt = 1.0E-10, omega = 7.29212E-5, omega_sor = 1.8, &
396	overshoot_limit_e = 0.0, overshoot_limit_pt = 0.0, &
397	overshoot_limit_u = 0.0, overshoot_limit_v = 0.0, &
398	overshoot_limit_w = 0.0, particle_maximum_age = 9999999.9, &
399	phi = 55.0, prandtl_number = 1.0, &
400	precipitation_amount_interval = 9999999.9, prho_reference, &
401	pt_reference = 9999999.9, pt_slope_offset = 0.0, &
402	pt_surface = 300.0, pt_surface_initial_change = 0.0, &
403	q_surface = 0.0, q_surface_initial_change = 0.0, &
404	rayleigh_damping_factor = -1.0, rayleigh_damping_height = -1.0, &
405	residual_limit = 1.0E-4, restart_time = 9999999.9, rho_reference, &
406	rho_surface, rif_max = 1.0, &
407	rif_min = -5.0, roughness_length = 0.1, sa_surface = 35.0, &
408	simulated_time = 0.0, simulated_time_at_begin, sin_alpha_surface, &
409	skip_time_data_output = 0.0, skip_time_data_output_av = 9999999.9,&
410	skip_time_dopr = 9999999.9, skip_time_dosp = 9999999.9, &
411	skip_time_do2d_xy = 9999999.9, skip_time_do2d_xz = 9999999.9, &
412	skip_time_do2d_yz = 9999999.9, skip_time_do3d = 9999999.9, &
413	surface_heatflux = 9999999.9, surface_pressure = 1013.25, &
414	surface_scalarflux = 0.0, surface_waterflux = 0.0, &
415	s_surface = 0.0, s_surface_initial_change = 0.0, &
416	termination_time_needed = -1.0, time_coupling = 0.0, &
417	time_disturb = 0.0, &
418	time_dopr = 0.0, time_dopr_av = 0.0, time_dopr_listing = 0.0, &
419	time_dopts = 0.0, time_dosp = 0.0, time_dosp_av = 0.0, &
420	time_dots = 0.0, time_do2d_xy = 0.0, time_do2d_xz = 0.0, &
421	time_do2d_yz = 0.0, time_do3d = 0.0, time_do_av = 0.0, &
422	time_do_sla = 0.0, time_dvrp = 0.0, time_prel = 0.0, &
423	time_restart = 9999999.9, time_run_control = 0.0, &
424	top_heatflux = 9999999.9, top_momentumflux_u = 9999999.9, &
425	top_momentumflux_v = 9999999.9, top_salinityflux = 9999999.9, &
426	ug_surface = 0.0, u_gtrans = 0.0, &
427	ups_limit_e = 0.0, ups_limit_pt = 0.0, ups_limit_u = 0.0, &
428	ups_limit_v = 0.0, ups_limit_w = 0.0, vg_surface = 0.0, &
429	v_gtrans = 0.0, wall_adjustment_factor = 1.8, z_max_do1d = -1.0, &
430	z_max_do1d_normalized = -1.0, z_max_do2d = -1.0
431
432	REAL :: do2d_xy_last_time(0:1) = -1.0, do2d_xz_last_time(0:1) = -1.0, &
433	do2d_yz_last_time(0:1) = -1.0, &
434	lad_vertical_gradient(10) = 0.0, &
435	lad_vertical_gradient_level(10) = -9999999.9, &
436	pt_vertical_gradient(10) = 0.0, &
437	pt_vertical_gradient_level(10) = -9999999.9, &
438	q_vertical_gradient(10) = 0.0, &
439	q_vertical_gradient_level(10) = -1.0, &
440	s_vertical_gradient(10) = 0.0, &
441	s_vertical_gradient_level(10) = -1.0, &
442	sa_vertical_gradient(10) = 0.0, &
443	sa_vertical_gradient_level(10) = -9999999.9, threshold(20) = 0.0, &
444	tsc(10) = (/ 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 /), &
445	ug_vertical_gradient(10) = 0.0, &
446	ug_vertical_gradient_level(10) = -9999999.9, &
447	vg_vertical_gradient(10) = 0.0, &
448	vg_vertical_gradient_level(10) = -9999999.9, &
449	volume_flow(1:2) = 0.0, volume_flow_area(1:2) = 0.0, &
450	volume_flow_initial(1:2) = 0.0, wall_heatflux(0:4) = 0.0, &
451	wall_humidityflux(0:4) = 0.0, wall_qflux(0:4) = 0.0, &
452	wall_salinityflux(0:4) = 0.0, wall_scalarflux(0:4) = 0.0
453
454
455	SAVE
456
457	END MODULE control_parameters
458
459
460
461
462	MODULE cpulog
463
464	!------------------------------------------------------------------------------!
465	! Description:
466	! ------------
467	! Definition of variables for cpu-time measurements
468	!------------------------------------------------------------------------------!
469
470	REAL :: initial_wallclock_time
471
472	TYPE logpoint
473	REAL :: isum, ivect, mean, mtime, mtimevec, sum, vector
474	INTEGER :: counts
475	CHARACTER (LEN=20) :: place
476	END TYPE logpoint
477
478	TYPE(logpoint), DIMENSION(100) :: log_point = logpoint( 0.0, 0.0, 0.0, &
479	0.0, 0.0, 0.0, 0.0, 0, ' ' ), &
480	log_point_s = logpoint( 0.0, 0.0, 0.0, &
481	0.0, 0.0, 0.0, 0.0, 0, ' ' )
482
483	SAVE
484
485	END MODULE cpulog
486
487
488
489
490	MODULE dvrp_variables
491
492	!------------------------------------------------------------------------------!
493	! Description:
494	! ------------
495	! Definition of variables used with dvrp-software
496	!------------------------------------------------------------------------------!
497
498	CHARACTER (LEN=10) :: dvrp_output = 'rtsp'
499
500	CHARACTER (LEN=20), DIMENSION(10) :: mode_dvrp = &
501	(/ ( ' ', i9 = 1,10 ) /)
502
503	CHARACTER (LEN=80) :: dvrp_directory = 'default', &
504	dvrp_file = 'default', &
505	dvrp_host = 'origin.rvs.uni-hannover.de', &
506	dvrp_password = '********', &
507	dvrp_username = ' '
508
509	INTEGER :: dvrp_colourtable_entries = 4, islice_dvrp, nx_dvrp, ny_dvrp, &
510	nz_dvrp
511
512	INTEGER, DIMENSION(10) :: slicer_position_dvrp
513
514	LOGICAL :: cyclic_dvrp = .FALSE., lock_steering_update = .FALSE., &
515	use_seperate_pe_for_dvrp_output = .FALSE.
516
517	REAL :: superelevation = 1.0, superelevation_x = 1.0, &
518	superelevation_y = 1.0
519
520	#if defined( __decalpha )
521	REAL, DIMENSION(2,10) :: slicer_range_limits_dvrp = (/ &
522	-1.0, 1.0, -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
523	-1.0, 1.0, -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
524	-1.0, 1.0, -1.0, 1.0 /)
525
526	REAL, DIMENSION(2,100) :: interval_values_dvrp, interval_h_dvrp = &
527	(/ 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, &
528	25.0, -25.0, ( 0.0, i9 = 1, 192 ) /), &
529	interval_l_dvrp = 0.5, interval_s_dvrp = 1.0, &
530	interval_a_dvrp = 0.0
531	#else
532	REAL, DIMENSION(2,10) :: slicer_range_limits_dvrp
533
534	REAL, DIMENSION(2,100) :: interval_values_dvrp, interval_h_dvrp, &
535	interval_l_dvrp = 0.5, interval_s_dvrp = 1.0, &
536	interval_a_dvrp = 0.0
537
538	DATA slicer_range_limits_dvrp / -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
539	-1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
540	-1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
541	-1.0, 1.0 /
542
543	DATA interval_h_dvrp / 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, &
544	25.0, -25.0, 192 * 0.0 /
545	#endif
546
547	REAL, DIMENSION(:), ALLOCATABLE :: xcoor_dvrp, ycoor_dvrp, zcoor_dvrp
548
549	TYPE steering
550	CHARACTER (LEN=20) :: name
551	REAL :: min, max
552	INTEGER :: imin, imax
553	END TYPE steering
554
555	TYPE(steering), DIMENSION(:), ALLOCATABLE :: steering_dvrp
556
557	SAVE
558
559	END MODULE dvrp_variables
560
561
562
563
564	MODULE grid_variables
565
566	!------------------------------------------------------------------------------!
567	! Description:
568	! ------------
569	! Definition of grid spacings
570	!------------------------------------------------------------------------------!
571
572	REAL :: ddx, ddx2, dx = 1.0, dx2, ddy, ddy2, dy = 1.0, dy2
573
574	REAL, DIMENSION(:), ALLOCATABLE :: ddx2_mg, ddy2_mg
575
576	REAL, DIMENSION(:,:), ALLOCATABLE :: fwxm, fwxp, fwym, fwyp, fxm, fxp, &
577	fym, fyp, wall_e_x, wall_e_y, &
578	wall_u, wall_v, wall_w_x, wall_w_y, &
579	zu_s_inner, zw_w_inner
580
581	SAVE
582
583	END MODULE grid_variables
584
585
586
587
588	MODULE indices
589
590	!------------------------------------------------------------------------------!
591	! Description:
592	! ------------
593	! Definition of array bounds and number of gridpoints
594	!------------------------------------------------------------------------------!
595
596	INTEGER :: ngp_sums, nnx, nx = 0, nxa, nxl, nxlu, nxr, nxra, nny, ny = 0, &
597	nya, nyn, nyna, nys, nysv, nnz, nz = 0, nza, nzb, nzb_diff, &
598	nzt, nzta, nzt_diff
599
600	INTEGER, DIMENSION(:), ALLOCATABLE :: &
601	ngp_2dh, ngp_3d, ngp_3d_inner, &
602	nnx_pe, nny_pe, nxl_mg, nxr_mg, nyn_mg, nys_mg, nzt_mg
603
604	INTEGER, DIMENSION(:,:), ALLOCATABLE :: &
605	ngp_2dh_outer, ngp_2dh_s_inner, mg_loc_ind, nzb_diff_s_inner, &
606	nzb_diff_s_outer, nzb_diff_u, nzb_diff_v, nzb_inner, nzb_outer,&
607	nzb_s_inner, nzb_s_outer, nzb_u_inner, nzb_u_outer, &
608	nzb_v_inner, nzb_v_outer, nzb_w_inner, nzb_w_outer, nzb_2d
609
610	INTEGER, DIMENSION(:,:,:), POINTER :: flags
611
612	INTEGER, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_1, &
613	wall_flags_2, wall_flags_3, wall_flags_4, wall_flags_5, &
614	wall_flags_6, wall_flags_7, wall_flags_8, wall_flags_9, &
615	wall_flags_10
616
617	SAVE
618
619	END MODULE indices
620
621
622
623
624	MODULE interfaces
625
626	!------------------------------------------------------------------------------!
627	! Description:
628	! ------------
629	! Interfaces for special subroutines which use optional parameters
630	!------------------------------------------------------------------------------!
631
632	INTERFACE
633
634	SUBROUTINE cpu_log( log_event, place, modus, barrierwait )
635
636	USE cpulog
637
638	CHARACTER (LEN=*) :: modus, place
639	CHARACTER (LEN=*), OPTIONAL :: barrierwait
640	TYPE(logpoint) :: log_event
641
642	END SUBROUTINE cpu_log
643
644	END INTERFACE
645
646
647
648	INTERFACE
649
650	SUBROUTINE global_min_max ( i1, i2, j1, j2, k1, k2, feld, mode, wert, &
651	wert_ijk, wert1, wert1_ijk )
652	CHARACTER (LEN=*), INTENT(IN) :: mode
653	INTEGER, INTENT(IN) :: i1, i2, j1, j2, k1, k2
654	INTEGER :: wert_ijk(3)
655	INTEGER, OPTIONAL :: wert1_ijk(3)
656	REAL :: wert
657	REAL, OPTIONAL :: wert1
658	REAL, INTENT(IN) :: feld(i1:i2,j1:j2,k1:k2)
659
660	END SUBROUTINE global_min_max
661
662	END INTERFACE
663
664	SAVE
665
666	END MODULE interfaces
667
668
669
670	MODULE pointer_interfaces
671
672	!------------------------------------------------------------------------------!
673	! Description:
674	! ------------
675	! Interfaces for subroutines with pointer arguments called in
676	! prognostic_equations
677	!------------------------------------------------------------------------------!
678
679	INTERFACE
680
681	SUBROUTINE advec_s_bc( sk, sk_char )
682
683	CHARACTER (LEN=*), INTENT(IN) :: sk_char
684	REAL, DIMENSION(:,:,:), POINTER :: sk
685
686	END SUBROUTINE advec_s_bc
687
688	END INTERFACE
689
690
691	SAVE
692
693	END MODULE pointer_interfaces
694
695
696
697
698	MODULE model_1d
699
700	!------------------------------------------------------------------------------!
701	! Description:
702	! ------------
703	! Definition of variables for the 1D-model
704	!------------------------------------------------------------------------------!
705
706	INTEGER :: current_timestep_number_1d = 0, damp_level_ind_1d, &
707	last_dt_change_1d = 0
708
709	LOGICAL :: run_control_header_1d = .FALSE., stop_dt_1d = .FALSE.
710
711	REAL :: damp_level_1d = -1.0, dt_1d = 60.0, dt_max_1d = 300.0, &
712	dt_pr_1d = 9999999.9, dt_run_control_1d = 60.0, &
713	end_time_1d = 864000.0, old_dt_1d = 1.0E-10, &
714	qs1d, simulated_time_1d = 0.0, time_pr_1d = 0.0, &
715	time_run_control_1d = 0.0, ts1d, us1d, usws1d, usws1d_m, &
716	vsws1d, vsws1d_m, z01d
717
718
719	REAL, DIMENSION(:), ALLOCATABLE :: e1d, e1d_m, e1d_p, kh1d, kh1d_m, km1d, &
720	km1d_m, l_black, l1d, l1d_m, rif1d, &
721	te_e, te_em, te_u, te_um, te_v, te_vm, &
722	u1d, u1d_m, u1d_p, v1d, v1d_m, v1d_p
723
724	SAVE
725
726	END MODULE model_1d
727
728
729
730
731	MODULE netcdf_control
732
733	!------------------------------------------------------------------------------!
734	! Description:
735	! ------------
736	! Definition of parameters and variables for netcdf control.
737	!------------------------------------------------------------------------------!
738
739	#if defined( __netcdf )
740	USE netcdf
741	#endif
742
743	INTEGER, PARAMETER :: dopr_norm_num = 7, dopts_num = 26, dots_max = 100, &
744	replace_num = 6
745
746	INTEGER :: dots_num = 22
747
748	CHARACTER, DIMENSION( replace_num ) :: &
749	replace_char = (/ '''', '"', '*', '/', '(', ')' /), &
750	replace_by = (/ 'p' , 'p', 's', 'o', '_', '_' /)
751
752	CHARACTER (LEN=6), DIMENSION(dopr_norm_num) :: dopr_norm_names = &
753	(/ 'wpt0 ', 'ws2 ', 'tsw2 ', 'ws3 ', 'ws2tsw', 'wstsw2', &
754	'z_i ' /)
755
756	CHARACTER (LEN=6), DIMENSION(dopr_norm_num) :: dopr_norm_longnames = &
757	(/ 'wpt0 ', 'w2 ', 'tw2 ', 'w3 ', 'w2tw', 'wt*w2', &
758	'z_i ' /)
759
760	CHARACTER (LEN=7), DIMENSION(dopts_num) :: dopts_label = &
761	(/ 'tnpt ', 'x_ ', 'y_ ', 'z_ ', 'z_abs ', 'u ', &
762	'v ', 'w ', 'u" ', 'v" ', 'w" ', 'npt_up ', &
763	'w_up ', 'w_down ', 'npt_max', 'npt_min', 'x2 ', 'y2 ', &
764	'z2 ', 'u2 ', 'v2 ', 'w2 ', 'u"2 ', 'v"2 ', &
765	'w"2 ', 'npt*2 ' /)
766
767	CHARACTER (LEN=7), DIMENSION(dopts_num) :: dopts_unit = &
768	(/ 'number ', 'm ', 'm ', 'm ', 'm ', 'm/s ', &
769	'm/s ', 'm/s ', 'm/s ', 'm/s ', 'm/s ', 'number ', &
770	'm/s ', 'm/s ', 'number ', 'number ', 'm2 ', 'm2 ', &
771	'm2 ', 'm2/s2 ', 'm2/s2 ', 'm2/s2 ', 'm2/s2 ', 'm2/s2 ', &
772	'm2/s2 ', 'number2' /)
773
774	CHARACTER (LEN=7), DIMENSION(dots_max) :: dots_label = &
775	(/ 'E ', 'E* ', 'dt ', 'u* ', 'th* ', 'umax ', &
776	'vmax ', 'wmax ', 'div_new', 'div_old', 'z_i_wpt', 'z_i_pt ', &
777	'w* ', 'w"pt"0 ', 'w"pt" ', 'wpt ', 'pt(0) ', 'pt(zp) ', &
778	'splptx ', 'splpty ', 'splptz ', 'mo_L ', &
779	( 'unknown', i9 = 1, 78) /)
780
781	CHARACTER (LEN=7), DIMENSION(dots_max) :: dots_unit = &
782	(/ 'm2/s2 ', 'm2/s2 ', 's ', 'm/s ', 'K ', 'm/s ', &
783	'm/s ', 'm/s ', 's-1 ', 's-1 ', 'm ', 'm ', &
784	'm/s ', 'K m/s ', 'K m/s ', 'k m/s ', 'K ', 'K ', &
785	'% ', '% ', '% ', 'm ', &
786	( 'unknown', i9 = 1, 78 ) /)
787
788	CHARACTER (LEN=7), DIMENSION(300) :: dopr_unit = 'unknown'
789
790	CHARACTER (LEN=7), DIMENSION(0:1,100) :: do2d_unit, do3d_unit
791
792	CHARACTER (LEN=16), DIMENSION(25) :: prt_var_names = &
793	(/ 'pt_age ', 'pt_dvrp_size ', 'pt_origin_x ', &
794	'pt_origin_y ', 'pt_origin_z ', 'pt_radius ', &
795	'pt_speed_x ', 'pt_speed_y ', 'pt_speed_z ', &
796	'pt_weight_factor', 'pt_x ', 'pt_y ', &
797	'pt_z ', 'pt_color ', 'pt_group ', &
798	'pt_tailpoints ', 'pt_tail_id ', 'pt_density_ratio', &
799	'pt_exp_arg ', 'pt_exp_term ', 'not_used ', &
800	'not_used ', 'not_used ', 'not_used ', &
801	'not_used ' /)
802
803	CHARACTER (LEN=16), DIMENSION(25) :: prt_var_units = &
804	(/ 'seconds ', 'meters ', 'meters ', &
805	'meters ', 'meters ', 'meters ', &
806	'm/s ', 'm/s ', 'm/s ', &
807	'factor ', 'meters ', 'meters ', &
808	'meters ', 'none ', 'none ', &
809	'none ', 'none ', 'ratio ', &
810	'none ', 'none ', 'not_used ', &
811	'not_used ', 'not_used ', 'not_used ', &
812	'not_used ' /)
813
814	INTEGER :: id_dim_prtnum, id_dim_time_pr, id_dim_time_prt, &
815	id_dim_time_pts, id_dim_time_sp, id_dim_time_ts, id_dim_x_sp, &
816	id_dim_y_sp, id_dim_zu_sp, id_dim_zw_sp, id_set_pr, &
817	id_set_prt, id_set_pts, id_set_sp, id_set_ts, id_var_prtnum, &
818	id_var_rnop_prt, id_var_time_pr, id_var_time_prt, &
819	id_var_time_pts, id_var_time_sp, id_var_time_ts, id_var_x_sp, &
820	id_var_y_sp, id_var_zu_sp, id_var_zw_sp, nc_stat
821
822	INTEGER, DIMENSION(0:1) :: id_dim_time_xy, id_dim_time_xz, &
823	id_dim_time_yz, id_dim_time_3d, id_dim_x_xy, id_dim_xu_xy, &
824	id_dim_x_xz, id_dim_xu_xz, id_dim_x_yz, id_dim_xu_yz, &
825	id_dim_x_3d, id_dim_xu_3d, id_dim_y_xy, id_dim_yv_xy, &
826	id_dim_y_xz, id_dim_yv_xz, id_dim_y_yz, id_dim_yv_yz, &
827	id_dim_y_3d, id_dim_yv_3d, id_dim_zu_xy, id_dim_zu1_xy, &
828	id_dim_zu_xz, id_dim_zu_yz, id_dim_zu_3d, id_dim_zw_xy, &
829	id_dim_zw_xz, id_dim_zw_yz, id_dim_zw_3d, id_set_xy, &
830	id_set_xz, id_set_yz, id_set_3d, id_var_ind_x_yz, &
831	id_var_ind_y_xz, id_var_ind_z_xy, id_var_time_xy, &
832	id_var_time_xz, id_var_time_yz, id_var_time_3d, id_var_x_xy, &
833	id_var_xu_xy, id_var_x_xz, id_var_xu_xz, id_var_x_yz, &
834	id_var_xu_yz, id_var_x_3d, id_var_xu_3d, id_var_y_xy, &
835	id_var_yv_xy, id_var_y_xz, id_var_yv_xz, id_var_y_yz, &
836	id_var_yv_yz, id_var_y_3d, id_var_yv_3d, id_var_zusi_xy, &
837	id_var_zusi_3d, id_var_zu_xy, id_var_zu1_xy, id_var_zu_xz, &
838	id_var_zu_yz, id_var_zu_3d, id_var_zwwi_xy, id_var_zwwi_3d, &
839	id_var_zw_xy, id_var_zw_xz, id_var_zw_yz, id_var_zw_3d
840
841	INTEGER, DIMENSION(10) :: id_var_dospx, id_var_dospy, nc_precision
842	INTEGER, DIMENSION(20) :: id_var_prt
843	INTEGER, DIMENSION(dopr_norm_num) :: id_var_norm_dopr
844
845	INTEGER, DIMENSION(dopts_num,0:10) :: id_var_dopts
846	INTEGER, DIMENSION(0:1,100) :: id_var_do2d, id_var_do3d
847	INTEGER, DIMENSION(100,0:9) :: id_dim_z_pr, id_var_dopr, &
848	id_var_z_pr
849	INTEGER, DIMENSION(dots_max,0:9) :: id_var_dots
850
851
852	SAVE
853
854	END MODULE netcdf_control
855
856
857
858	MODULE particle_attributes
859
860	!------------------------------------------------------------------------------!
861	! Description:
862	! ------------
863	! Definition of variables used to compute particle transport
864	!------------------------------------------------------------------------------!
865
866	USE array_kind
867
868	CHARACTER (LEN=15) :: bc_par_lr = 'cyclic', bc_par_ns = 'cyclic', &
869	bc_par_b = 'reflect', bc_par_t = 'absorb'
870
871	#if defined( __parallel )
872	INTEGER :: mpi_particle_type
873	#endif
874	INTEGER :: ibc_par_lr, ibc_par_ns, ibc_par_b, ibc_par_t, &
875	iran_part = -1234567, maximum_number_of_particles = 1000, &
876	maximum_number_of_tailpoints = 100, &
877	maximum_number_of_tails = 0, &
878	number_of_initial_particles = 0, number_of_particles = 0, &
879	number_of_particle_groups = 1, number_of_tails = 0, &
880	number_of_initial_tails = 0, particles_per_point = 1, &
881	particle_file_count = 0, skip_particles_for_tail = 100, &
882	total_number_of_particles, total_number_of_tails = 0
883
884	INTEGER, PARAMETER :: max_number_of_particle_groups = 10
885
886	INTEGER, DIMENSION(:), ALLOCATABLE :: new_tail_id
887	INTEGER, DIMENSION(:,:,:), ALLOCATABLE :: prt_count, prt_start_index
888
889	LOGICAL :: particle_advection = .FALSE., random_start_position = .FALSE., &
890	read_particles_from_restartfile = .TRUE., &
891	uniform_particles = .TRUE., use_particle_tails = .FALSE., &
892	use_sgs_for_particles = .FALSE., &
893	vertical_particle_advection = .TRUE., &
894	write_particle_statistics = .FALSE.
895	LOGICAL, DIMENSION(:), ALLOCATABLE :: particle_mask, tail_mask
896
897	REAL :: c_0 = 3.0, dt_min_part = 0.0002, dt_sort_particles = 0.0, &
898	dt_write_particle_data = 9999999.9, dvrp_psize = 9999999.9, &
899	end_time_prel = 9999999.9, initial_weighting_factor = 1.0, &
900	maximum_tailpoint_age = 100000.0, &
901	minimum_tailpoint_distance = 0.0, &
902	particle_advection_start = 0.0, sgs_wfu_part = 0.3333333, &
903	sgs_wfv_part = 0.3333333, sgs_wfw_part = 0.3333333, &
904	time_sort_particles = 0.0, time_write_particle_data = 0.0
905
906	REAL, DIMENSION(max_number_of_particle_groups) :: &
907	density_ratio = 9999999.9, pdx = 9999999.9, pdy = 9999999.9, &
908	pdz = 9999999.9, psb = 9999999.9, psl = 9999999.9, &
909	psn = 9999999.9, psr = 9999999.9, pss = 9999999.9, &
910	pst = 9999999.9, radius = 9999999.9
911
912	REAL, DIMENSION(:,:,:), ALLOCATABLE :: particle_tail_coordinates
913
914
915	TYPE particle_type
916	SEQUENCE
917	REAL :: age, age_m, dt_sum, dvrp_psize, e_m, origin_x, origin_y, &
918	origin_z, radius, speed_x, speed_x_sgs, speed_y, &
919	speed_y_sgs, speed_z, speed_z_sgs, weight_factor, x, y, z
920	INTEGER :: color, group, tailpoints, tail_id
921	END TYPE particle_type
922
923	TYPE(particle_type), DIMENSION(:), ALLOCATABLE :: initial_particles, &
924	particles
925
926	TYPE particle_groups_type
927	SEQUENCE
928	REAL :: density_ratio, radius, exp_arg, exp_term
929	END TYPE particle_groups_type
930
931	TYPE(particle_groups_type), DIMENSION(max_number_of_particle_groups) ::&
932	particle_groups
933
934	SAVE
935
936	END MODULE particle_attributes
937
938
939
940
941
942	MODULE pegrid
943
944	!------------------------------------------------------------------------------!
945	! Description:
946	! ------------
947	! Definition of variables which define processor topology and the exchange of
948	! ghost point layers. This modules must be placed in all routines which contain
949	! MPI-calls.
950	!------------------------------------------------------------------------------!
951
952	#if defined( __parallel )
953	#if defined( __lc )
954	USE MPI
955	#else
956	INCLUDE "mpif.h"
957	#endif
958	#endif
959	CHARACTER(LEN=5) :: myid_char = '', myid_char_14 = ''
960	INTEGER :: myid=0, npex = -1, npey = -1, numprocs = 1, &
961	tasks_per_node = -9999, threads_per_task = 1
962
963	#if defined( __parallel )
964	#if defined( __mpi2 )
965	CHARACTER (LEN=MPI_MAX_PORT_NAME) :: port_name
966	#endif
967
968	INTEGER :: comm1dx, comm1dy, comm2d, comm_inter, comm_palm, ierr, myidx, &
969	myidy, ndim = 2, ngp_xy, ngp_y, pleft, pnorth, pright, psouth, &
970	sendrecvcount_xy, sendrecvcount_yz, sendrecvcount_zx, &
971	sendrecvcount_zyd, sendrecvcount_yxd, &
972	type_x, type_x_int, type_xy
973
974	INTEGER :: ibuf(12), pcoord(2), pdims(2), status(MPI_STATUS_SIZE)
975
976	INTEGER, DIMENSION(:), ALLOCATABLE :: ngp_yz, type_xz
977
978	LOGICAL :: reorder = .TRUE.
979	LOGICAL, DIMENSION(2) :: cyclic = (/ .TRUE. , .TRUE. /), &
980	remain_dims
981	#endif
982
983	SAVE
984
985	END MODULE pegrid
986
987
988
989
990	MODULE profil_parameter
991
992	!------------------------------------------------------------------------------!
993	! Description:
994	! ------------
995	! Definition of variables which control PROFIL-output
996	!------------------------------------------------------------------------------!
997
998	INTEGER, PARAMETER :: crmax = 100
999
1000	CHARACTER (LEN=10), DIMENSION(100) :: dopr_label = ' '
1001
1002	CHARACTER (LEN=10), DIMENSION(crmax) :: cross_normalized_x = ' ', &
1003	cross_normalized_y = ' '
1004
1005	CHARACTER (LEN=20), DIMENSION(20) :: cross_ts_profiles = &
1006	(/ ' E E* ', ' dt ', &
1007	' u* w* ', ' th* ', &
1008	' umax vmax wmax ', ' div_old div_new ', &
1009	' z_i_wpt z_i_pt ', ' w"pt"0 w"pt" wpt ', &
1010	' pt(0) pt(zp) ', ' splux spluy spluz ', &
1011	' L ', &
1012	( ' ', i9 = 1, 9 ) /)
1013
1014	CHARACTER (LEN=40), DIMENSION(crmax) :: cross_xtext = &
1015	(/ 'windspeed in ms>->1 ', &
1016	'pot. temperature in K ', &
1017	'heat flux in K ms>->1 ', &
1018	'momentum flux in m>2s>2 ', &
1019	'eddy diffusivity in m>2s>->1', &
1020	'mixing length in m ', &
1021	( ' ', i9 = 1, 94 ) /)
1022
1023	CHARACTER (LEN=100), DIMENSION(crmax) :: cross_profiles = &
1024	(/ ' u v ', &
1025	' pt ', &
1026	' w"pt" wpt wptBC wpt wptBC ', &
1027	' w"u" wu wu w"v" wv wv ', &
1028	' km kh ', &
1029	' l ', &
1030	( ' ', i9 = 1, 94 ) /)
1031
1032	INTEGER :: profile_columns = 3, profile_rows = 2, profile_number = 0
1033
1034	INTEGER :: cross_linecolors(100,crmax) = 1, &
1035	cross_linestyles(100,crmax) = 0, &
1036	cross_profile_numbers(100,crmax) = 0, &
1037	cross_pnc_local(crmax), cross_profile_number_count(crmax) = 0, &
1038	cross_ts_numbers(crmax,crmax) = 0, &
1039	cross_ts_number_count(crmax) = 0, dopr_crossindex(100) = 0, &
1040	dopr_index(300) = 0, dopr_initial_index(300) = 0, &
1041	dots_crossindex(100) = 0, dots_index(100) = 0, &
1042	linecolors(10) = (/ 2, 3, 4, 5, 7, 8, 12, 15, 16, 23 /), &
1043	linestyles(11) = (/ 0, 7, 3, 10, 4, 1, 9, 2, 5, 8, 6 /)
1044
1045
1046	REAL :: cross_normx_factor(100,crmax) = 1.0, &
1047	cross_normy_factor(100,crmax) = 1.0, &
1048	cross_ts_uymax(20) = &
1049	(/ 999.999, 999.999, 999.999, 999.999, 999.999, &
1050	999.999, 999.999, 999.999, 999.999, 999.999, &
1051	999.999, 999.999, 999.999, 999.999, 999.999, &
1052	999.999, 999.999, 999.999, 999.999, 999.999 /),&
1053	cross_ts_uymax_computed(20) = 999.999, &
1054	cross_ts_uymin(20) = &
1055	(/ 999.999, 999.999, 999.999, -5.000, 999.999, &
1056	999.999, 0.000, 999.999, 999.999, 999.999, &
1057	999.999, 999.999, 999.999, 999.999, 999.999, &
1058	999.999, 999.999, 999.999, 999.999, 999.999 /),&
1059	cross_ts_uymin_computed(20) = 999.999, &
1060	cross_uxmax(crmax) = 0.0, cross_uxmax_computed(crmax) = -1.0, &
1061	cross_uxmax_normalized(crmax) = 0.0, &
1062	cross_uxmax_normalized_computed(crmax) = -1.0, &
1063	cross_uxmin(crmax) = 0.0, cross_uxmin_computed(crmax) = 1.0, &
1064	cross_uxmin_normalized(crmax) = 0.0, &
1065	cross_uxmin_normalized_computed(crmax) = 1.0, &
1066	cross_uymax(crmax), cross_uymin(crmax)
1067
1068	SAVE
1069
1070	END MODULE profil_parameter
1071
1072
1073
1074
1075	MODULE spectrum
1076
1077	!------------------------------------------------------------------------------!
1078	! Description:
1079	! ------------
1080	! Definition of quantities used for computing spectra
1081	!------------------------------------------------------------------------------!
1082
1083	CHARACTER (LEN=6), DIMENSION(1:5) :: header_char = (/ 'PS(u) ', 'PS(v) ',&
1084	'PS(w) ', 'PS(pt)', 'PS(q) ' /)
1085	CHARACTER (LEN=2), DIMENSION(10) :: spectra_direction = 'x'
1086	CHARACTER (LEN=10), DIMENSION(10) :: data_output_sp = ' '
1087	CHARACTER (LEN=25), DIMENSION(1:5) :: utext_char = &
1088	(/ '-power spectrum of u ', &
1089	'-power spectrum of v ', &
1090	'-power spectrum of w ', &
1091	'-power spectrum of ^1185 ', &
1092	'-power spectrum of q ' /)
1093	CHARACTER (LEN=39), DIMENSION(1:5) :: ytext_char = &
1094	(/ 'k ^2236 ^2566^2569<u(k) in m>2s>->2 ', &
1095	'k ^2236 ^2566^2569<v(k) in m>2s>->2 ', &
1096	'k ^2236 ^2566^2569<w(k) in m>2s>->2 ', &
1097	'k ^2236 ^2566^2569<^1185(k) in m>2s>->2', &
1098	'k ^2236 ^2566^2569<q(k) in m>2s>->2 ' /)
1099
1100	INTEGER :: klist_x = 0, klist_y = 0, n_sp_x = 0, n_sp_y = 0
1101
1102	INTEGER :: comp_spectra_level(10) = 999999, &
1103	lstyles(10) = (/ 0, 7, 3, 10, 1, 4, 9, 2, 6, 8 /), &
1104	plot_spectra_level(10) = 999999
1105
1106	REAL :: time_to_start_sp = 0.0
1107
1108	SAVE
1109
1110	END MODULE spectrum
1111
1112
1113
1114
1115	MODULE statistics
1116
1117	!------------------------------------------------------------------------------!
1118	! Description:
1119	! ------------
1120	! Definition of statistical quantities, e.g. global sums
1121	!------------------------------------------------------------------------------!
1122
1123	CHARACTER (LEN=40) :: region(0:9)
1124	INTEGER :: pr_palm = 80, statistic_regions = 0, var_ts = 100
1125	INTEGER :: u_max_ijk(3), v_max_ijk(3), w_max_ijk(3)
1126	LOGICAL :: flow_statistics_called = .FALSE.
1127	REAL :: u_max, v_max, w_max
1128	REAL, DIMENSION(:), ALLOCATABLE :: sums_divnew_l, sums_divold_l
1129	REAL, DIMENSION(:,:), ALLOCATABLE :: sums, sums_wsts_bc_l, ts_value
1130	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum, rmask, spectrum_x, &
1131	spectrum_y, sums_l, sums_l_l, &
1132	sums_up_fraction_l
1133	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom
1134
1135	SAVE
1136
1137	END MODULE statistics
1138
1139
1140
1141
1142	MODULE transpose_indices
1143
1144	!------------------------------------------------------------------------------!
1145	! Description:
1146	! ------------
1147	! Definition of indices for transposed arrays
1148	!------------------------------------------------------------------------------!
1149
1150	INTEGER :: nxl_y, nxl_yd, nxl_z, nxr_y, nxr_ya, nxr_yd, nxr_yda, nxr_z, &
1151	nxr_za, nyn_x, nyn_xa, nyn_z, nyn_za, nys_x, nys_z, nzb_x, &
1152	nzb_y, nzb_yd, nzt_x, nzt_xa, nzt_y, nzt_ya, nzt_yd, nzt_yda
1153
1154
1155	SAVE
1156
1157	END MODULE transpose_indices

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/modules.f90 @ 141

Download in other formats: