Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4150

Last change on this file since 4150 was 4132, checked in by suehring, 5 years ago
Bugfix in masked data output for prognostic quantities
Property svn:keywords set to `Id`
File size: 82.0 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4132 2019-08-02 12:34:17Z suehring $
27	! Bugfix in masked data output for diagnostic quantities
28	!
29	! 4131 2019-08-02 11:06:18Z monakurppa
30	! Add output of 3D plant-canopy outputs (merge from branch resler)
31	!
32	! 4048 2019-06-21 21:00:21Z knoop
33	! Moved turbulence_closure_mod calls into this module_interface
34	!
35	! 4047 2019-06-21 18:58:09Z knoop
36	! Introduction of the dynamics module
37	!
38	! 4039 2019-06-18 10:32:41Z suehring
39	! Introduce diagnostic output
40	!
41	! 4028 2019-06-13 12:21:37Z schwenkel
42	! Further modularization of particle code components
43	!
44	! 4017 2019-06-06 12:16:46Z schwenkel
45	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
46	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
47	! are not defined everywhere, e.g. land-surface outputs, this will be
48	! problematic as NaN will be output.
49	!
50	! 3987 2019-05-22 09:52:13Z kanani
51	! Introduce switchable DEBUG file output via debug_message routine
52	!
53	! 3956 2019-05-07 12:32:52Z monakurppa
54	! - Added calls for salsa_non_advective_processes and
55	! salsa_exchange_horiz_bounds
56	! - Moved the call for salsa_data_output_2d/3d before that of
57	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
58	! salsa output variable and encounters a segmentation fault for "Ntot" due
59	! to the shortoutput name
60	!
61	! 3931 2019-04-24 16:34:28Z schwenkel
62	! Changed non_transport_physics to non_advective_processes
63	!
64	! 3930 2019-04-24 14:57:18Z forkel
65	! Correct/complete module_interface introduction for chemistry model
66	!
67	! 3887 2019 -04-12 08:47:41Z schwenkel
68	! Changes related to global restructuring of location messages and introduction
69	! of additional debug messages
70	!
71	! 3880 2019 -04-08 21:43:02Z knoop
72	! Add a call for salsa_prognostic_equations
73	!
74	! 3840 2019-03-29 10:35:52Z knoop
75	! bugfix: intent of dummy arguments changed to inout
76	!
77	! 3770 2019-02-28 11:22:32Z moh.hefny
78	! removed unused variables in module_interface_check_data_output_ts
79	!
80	! 3767 08:18:02Z raasch
81	! unused variable file_index removed from subroutine parameter list
82	!
83	! 3766 2019-02-26 16:23:41Z raasch
84	! first argument removed from module_interface_rrd_*, statement added to avoid
85	! compiler warning about unused variable, file reformatted with respect to coding
86	! standards
87	!
88	! 3762 2019-02-25 16:54:16Z suehring
89	! only pass required arguments to surface_data_output_rrd_local
90	!
91	! 3747 2019-02-16 15:15:23Z gronemeier
92	! Call user_init_arrays
93	!
94	! 3745 2019-02-15 18:57:56Z suehring
95	! Add indoor model
96	!
97	! 3744 2019-02-15 18:38:58Z suehring
98	! Removed bio_check_parameters as the method is empty.
99	!
100	! 3735 2019-02-12 09:52:40Z dom_dwd_user
101	! Accepting variable j from check_parameters and passing it to
102	! bio_check_data_output
103	! Add required restart data for surface output module
104	!
105	! 3731 2019-02-11 13:06:27Z suehring
106	! Add check_parameters routine for virtual measurements
107	!
108	! 3711 2019-01-31 13:44:26Z knoop
109	! Introduced module_interface_init_checks for post-init checks
110	!
111	! 3705 2019-01-29 19:56:39Z suehring
112	! Add last_actions for virtual measurements
113	!
114	! 3704 2019-01-29 19:51:41Z suehring
115	! Some interface calls moved to module_interface + cleanup
116	!
117	! 3684 2019-01-20 20:20:58Z knoop
118	! Bugfix: made unit intend INOUT
119	!
120	! 3650 2019-01-04 13:01:33Z kanani
121	! Add restart routines for biometeorology
122	!
123	! 3649 2019-01-02 16:52:21Z suehring
124	! Initialize strings, in order to avoid compiler warnings for non-initialized
125	! characters with intent(out) attribute
126	!
127	! 3648 2019-01-02 16:35:46Z suehring
128	! Rename subroutines for surface-data output
129	!
130	! 3641 2018-12-23 22:10:01Z knoop
131	! Initial implementation of the PALM module interface
132	!
133	!
134	! Description:
135	! ------------
136	!> This is the interface between the PALM model core and all its modules.
137	!>
138	!> @todo Re-format module to be consistent with coding standard
139	!------------------------------------------------------------------------------!
140	MODULE module_interface
141
142	USE indices, &
143	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
144
145	USE kinds
146
147	!
148	!-- load module-specific control parameters.
149	!-- ToDo: move all of them to respective module or a dedicated central module
150
151	USE dynamics_mod, &
152	ONLY: dynamics_parin, &
153	dynamics_check_parameters, &
154	dynamics_check_data_output_ts, &
155	dynamics_check_data_output_pr, &
156	dynamics_check_data_output, &
157	dynamics_init_masks, &
158	dynamics_define_netcdf_grid, &
159	dynamics_init_arrays, &
160	dynamics_init, &
161	dynamics_init_checks, &
162	dynamics_header, &
163	dynamics_actions, &
164	dynamics_non_advective_processes, &
165	dynamics_exchange_horiz, &
166	dynamics_prognostic_equations, &
167	dynamics_swap_timelevel, &
168	dynamics_3d_data_averaging, &
169	dynamics_data_output_2d, &
170	dynamics_data_output_3d, &
171	dynamics_statistics, &
172	dynamics_rrd_global, &
173	dynamics_rrd_local, &
174	dynamics_wrd_global, &
175	dynamics_wrd_local, &
176	dynamics_last_actions
177
178	USE turbulence_closure_mod, &
179	ONLY: tcm_check_parameters, &
180	tcm_check_data_output, &
181	tcm_init_arrays, &
182	tcm_init, &
183	tcm_actions, &
184	tcm_prognostic_equations, &
185	tcm_swap_timelevel, &
186	tcm_3d_data_averaging, &
187	tcm_data_output_2d, &
188	tcm_data_output_3d
189
190	USE control_parameters, &
191	ONLY: air_chemistry, &
192	biometeorology, &
193	debug_output, &
194	debug_output_timestep, &
195	indoor_model, &
196	land_surface, &
197	large_scale_forcing, &
198	nesting_offline, &
199	nudging, &
200	ocean_mode, &
201	plant_canopy, &
202	salsa, &
203	surface_output, &
204	syn_turb_gen, &
205	urban_surface, &
206	virtual_flight, &
207	virtual_measurement, &
208	wind_turbine
209
210	!
211	!-- load interface routines of all PALM modules
212	USE biometeorology_mod, &
213	ONLY: bio_parin, &
214	bio_check_data_output, &
215	bio_init, &
216	bio_init_checks, &
217	bio_header, &
218	bio_3d_data_averaging, &
219	bio_data_output_2d, &
220	bio_data_output_3d, &
221	bio_rrd_global, &
222	bio_rrd_local, &
223	bio_wrd_global, &
224	bio_wrd_local
225
226	USE bulk_cloud_model_mod, &
227	ONLY: bulk_cloud_model, &
228	bcm_parin, &
229	bcm_check_parameters, &
230	bcm_check_data_output_pr, &
231	bcm_check_data_output, &
232	bcm_init_arrays, &
233	bcm_init, &
234	bcm_header, &
235	bcm_actions, &
236	bcm_non_advective_processes, &
237	bcm_exchange_horiz, &
238	bcm_prognostic_equations, &
239	bcm_swap_timelevel, &
240	bcm_3d_data_averaging, &
241	bcm_data_output_2d, &
242	bcm_data_output_3d, &
243	bcm_rrd_global, &
244	bcm_wrd_global, &
245	bcm_rrd_local, &
246	bcm_wrd_local
247
248	USE chemistry_model_mod, &
249	ONLY: chem_parin, &
250	chem_check_parameters, &
251	chem_check_data_output_pr, &
252	chem_check_data_output, &
253	chem_exchange_horiz_bounds, &
254	chem_init_arrays, &
255	chem_init, &
256	chem_header, &
257	chem_actions, &
258	chem_non_advective_processes, &
259	chem_prognostic_equations, &
260	chem_swap_timelevel, &
261	chem_3d_data_averaging, &
262	chem_data_output_2d, &
263	chem_data_output_3d, &
264	chem_statistics, &
265	chem_rrd_local, &
266	chem_wrd_local
267
268	USE diagnostic_output_quantities_mod, &
269	ONLY: doq_3d_data_averaging, &
270	doq_check_data_output, &
271	doq_define_netcdf_grid, &
272	doq_output_2d, &
273	doq_output_3d, &
274	doq_wrd_local
275	! doq_rrd_local, &
276
277	USE flight_mod, &
278	ONLY: flight_parin, &
279	flight_header, &
280	flight_init, &
281	flight_rrd_global, &
282	flight_wrd_global
283
284	USE gust_mod, &
285	ONLY: gust_module_enabled, &
286	gust_parin, &
287	gust_check_parameters, &
288	gust_check_data_output_pr, &
289	gust_check_data_output, &
290	gust_init_arrays, &
291	gust_init, &
292	gust_header, &
293	gust_actions, &
294	gust_prognostic_equations, &
295	gust_swap_timelevel, &
296	gust_3d_data_averaging, &
297	gust_data_output_2d, &
298	gust_data_output_3d, &
299	gust_statistics, &
300	gust_rrd_global, &
301	gust_wrd_global, &
302	gust_rrd_local, &
303	gust_wrd_local
304
305	USE indoor_model_mod, &
306	ONLY: im_parin, &
307	im_check_data_output, &
308	im_check_parameters, &
309	im_data_output_3d, &
310	im_init
311
312	USE lagrangian_particle_model_mod, &
313	ONLY: lpm_parin, &
314	lpm_header, &
315	lpm_check_parameters, &
316	lpm_init_arrays, &
317	lpm_init, &
318	lpm_actions, &
319	lpm_rrd_global, &
320	lpm_rrd_local, &
321	lpm_wrd_local, &
322	lpm_wrd_global
323
324	USE land_surface_model_mod, &
325	ONLY: lsm_parin, &
326	lsm_check_parameters, &
327	lsm_check_data_output_pr, &
328	lsm_check_data_output, &
329	lsm_init_arrays, &
330	lsm_init, &
331	lsm_header, &
332	lsm_swap_timelevel, &
333	lsm_3d_data_averaging, &
334	lsm_data_output_2d, &
335	lsm_rrd_local, &
336	lsm_wrd_local
337
338	USE lsf_nudging_mod, &
339	ONLY: lsf_nudging_check_parameters, &
340	lsf_nudging_check_data_output_pr, &
341	lsf_init, &
342	nudge_init, &
343	lsf_nudging_header
344
345	USE multi_agent_system_mod, &
346	ONLY: mas_parin
347
348	USE nesting_offl_mod, &
349	ONLY: nesting_offl_parin, &
350	nesting_offl_check_parameters, &
351	nesting_offl_header
352
353	USE ocean_mod, &
354	ONLY: ocean_parin, &
355	ocean_check_parameters, &
356	ocean_check_data_output_pr, &
357	ocean_check_data_output, &
358	ocean_init_arrays, &
359	ocean_init, &
360	ocean_header, &
361	ocean_actions, &
362	ocean_prognostic_equations, &
363	ocean_swap_timelevel, &
364	ocean_3d_data_averaging, &
365	ocean_data_output_2d, &
366	ocean_data_output_3d, &
367	ocean_rrd_global, &
368	ocean_wrd_global, &
369	ocean_rrd_local, &
370	ocean_wrd_local
371
372	USE particle_attributes, &
373	ONLY: particle_advection
374
375	USE plant_canopy_model_mod, &
376	ONLY: pcm_parin, &
377	pcm_check_parameters, &
378	pcm_check_data_output, &
379	pcm_init, &
380	pcm_header, &
381	pcm_3d_data_averaging, &
382	pcm_data_output_3d
383
384	USE radiation_model_mod, &
385	ONLY: radiation, &
386	radiation_parin, &
387	radiation_check_parameters, &
388	radiation_check_data_output_ts, &
389	radiation_check_data_output_pr, &
390	radiation_check_data_output, &
391	radiation_init, &
392	radiation_header, &
393	radiation_3d_data_averaging, &
394	radiation_data_output_2d, &
395	radiation_data_output_3d, &
396	radiation_rrd_local, &
397	radiation_wrd_local
398
399	USE salsa_mod, &
400	ONLY: salsa_parin, &
401	salsa_check_parameters, &
402	salsa_check_data_output_pr, &
403	salsa_check_data_output, &
404	salsa_init_arrays, &
405	salsa_init, &
406	salsa_header, &
407	salsa_actions, &
408	salsa_non_advective_processes, &
409	salsa_exchange_horiz_bounds, &
410	salsa_prognostic_equations, &
411	salsa_swap_timelevel, &
412	salsa_3d_data_averaging, &
413	salsa_data_output_2d, &
414	salsa_data_output_3d, &
415	salsa_statistics, &
416	salsa_rrd_local, &
417	salsa_wrd_local
418
419	USE spectra_mod, &
420	ONLY: calculate_spectra, &
421	spectra_parin, &
422	spectra_check_parameters, &
423	spectra_header
424
425	USE surface_data_output_mod, &
426	ONLY: surface_data_output_parin, &
427	surface_data_output_check_parameters, &
428	surface_data_output_init_arrays, &
429	surface_data_output_rrd_local, &
430	surface_data_output_rrd_global, &
431	surface_data_output_wrd_local, &
432	surface_data_output_wrd_global
433
434	USE synthetic_turbulence_generator_mod, &
435	ONLY: stg_parin, &
436	stg_check_parameters, &
437	stg_header, &
438	stg_rrd_global, &
439	stg_wrd_global
440
441	USE urban_surface_mod, &
442	ONLY: usm_parin, &
443	usm_check_parameters, &
444	usm_check_data_output, &
445	usm_init_arrays, &
446	usm_init, &
447	usm_swap_timelevel, &
448	usm_3d_data_averaging, &
449	usm_rrd_local, &
450	usm_wrd_local
451
452	USE virtual_measurement_mod, &
453	ONLY: vm_check_parameters, &
454	vm_init, &
455	vm_last_actions, &
456	vm_parin
457
458	USE wind_turbine_model_mod, &
459	ONLY: wtm_parin, &
460	wtm_check_parameters, &
461	wtm_init_arrays, &
462	wtm_init, &
463	wtm_actions, &
464	wtm_rrd_global, &
465	wtm_wrd_global
466
467	USE user, &
468	ONLY: user_module_enabled, &
469	user_parin, &
470	user_check_parameters, &
471	user_check_data_output_ts, &
472	user_check_data_output_pr, &
473	user_check_data_output, &
474	user_init, &
475	user_init_arrays, &
476	user_header, &
477	user_actions, &
478	user_3d_data_averaging, &
479	user_data_output_2d, &
480	user_data_output_3d, &
481	user_statistics, &
482	user_rrd_global, &
483	user_rrd_local, &
484	user_wrd_global, &
485	user_wrd_local, &
486	user_last_actions
487
488	IMPLICIT NONE
489
490	PRIVATE
491
492	!
493	!-- Public functions
494	PUBLIC &
495	module_interface_parin, &
496	module_interface_check_parameters, &
497	module_interface_check_data_output_ts, &
498	module_interface_check_data_output_pr, &
499	module_interface_check_data_output, &
500	module_interface_init_masks, &
501	module_interface_define_netcdf_grid, &
502	module_interface_init_arrays, &
503	module_interface_init, &
504	module_interface_init_checks, &
505	module_interface_header, &
506	module_interface_actions, &
507	module_interface_non_advective_processes, &
508	module_interface_exchange_horiz, &
509	module_interface_prognostic_equations, &
510	module_interface_swap_timelevel, &
511	module_interface_3d_data_averaging, &
512	module_interface_data_output_2d, &
513	module_interface_data_output_3d, &
514	module_interface_statistics, &
515	module_interface_rrd_global, &
516	module_interface_wrd_global, &
517	module_interface_rrd_local, &
518	module_interface_wrd_local, &
519	module_interface_last_actions
520
521
522	INTERFACE module_interface_parin
523	MODULE PROCEDURE module_interface_parin
524	END INTERFACE module_interface_parin
525
526	INTERFACE module_interface_check_parameters
527	MODULE PROCEDURE module_interface_check_parameters
528	END INTERFACE module_interface_check_parameters
529
530	INTERFACE module_interface_check_data_output_ts
531	MODULE PROCEDURE module_interface_check_data_output_ts
532	END INTERFACE module_interface_check_data_output_ts
533
534	INTERFACE module_interface_check_data_output_pr
535	MODULE PROCEDURE module_interface_check_data_output_pr
536	END INTERFACE module_interface_check_data_output_pr
537
538	INTERFACE module_interface_check_data_output
539	MODULE PROCEDURE module_interface_check_data_output
540	END INTERFACE module_interface_check_data_output
541
542	INTERFACE module_interface_init_masks
543	MODULE PROCEDURE module_interface_init_masks
544	END INTERFACE module_interface_init_masks
545
546	INTERFACE module_interface_define_netcdf_grid
547	MODULE PROCEDURE module_interface_define_netcdf_grid
548	END INTERFACE module_interface_define_netcdf_grid
549
550	INTERFACE module_interface_init_arrays
551	MODULE PROCEDURE module_interface_init_arrays
552	END INTERFACE module_interface_init_arrays
553
554	INTERFACE module_interface_init
555	MODULE PROCEDURE module_interface_init
556	END INTERFACE module_interface_init
557
558	INTERFACE module_interface_init_checks
559	MODULE PROCEDURE module_interface_init_checks
560	END INTERFACE module_interface_init_checks
561
562	INTERFACE module_interface_header
563	MODULE PROCEDURE module_interface_header
564	END INTERFACE module_interface_header
565
566	INTERFACE module_interface_actions
567	MODULE PROCEDURE module_interface_actions
568	MODULE PROCEDURE module_interface_actions_ij
569	END INTERFACE module_interface_actions
570
571	INTERFACE module_interface_non_advective_processes
572	MODULE PROCEDURE module_interface_non_advective_processes
573	MODULE PROCEDURE module_interface_non_advective_processes_ij
574	END INTERFACE module_interface_non_advective_processes
575
576	INTERFACE module_interface_exchange_horiz
577	MODULE PROCEDURE module_interface_exchange_horiz
578	END INTERFACE module_interface_exchange_horiz
579
580	INTERFACE module_interface_prognostic_equations
581	MODULE PROCEDURE module_interface_prognostic_equations
582	MODULE PROCEDURE module_interface_prognostic_equations_ij
583	END INTERFACE module_interface_prognostic_equations
584
585	INTERFACE module_interface_swap_timelevel
586	MODULE PROCEDURE module_interface_swap_timelevel
587	END INTERFACE module_interface_swap_timelevel
588
589	INTERFACE module_interface_3d_data_averaging
590	MODULE PROCEDURE module_interface_3d_data_averaging
591	END INTERFACE module_interface_3d_data_averaging
592
593	INTERFACE module_interface_data_output_2d
594	MODULE PROCEDURE module_interface_data_output_2d
595	END INTERFACE module_interface_data_output_2d
596
597	INTERFACE module_interface_data_output_3d
598	MODULE PROCEDURE module_interface_data_output_3d
599	END INTERFACE module_interface_data_output_3d
600
601	INTERFACE module_interface_statistics
602	MODULE PROCEDURE module_interface_statistics
603	END INTERFACE module_interface_statistics
604
605	INTERFACE module_interface_rrd_global
606	MODULE PROCEDURE module_interface_rrd_global
607	END INTERFACE module_interface_rrd_global
608
609	INTERFACE module_interface_wrd_global
610	MODULE PROCEDURE module_interface_wrd_global
611	END INTERFACE module_interface_wrd_global
612
613	INTERFACE module_interface_rrd_local
614	MODULE PROCEDURE module_interface_rrd_local
615	END INTERFACE module_interface_rrd_local
616
617	INTERFACE module_interface_wrd_local
618	MODULE PROCEDURE module_interface_wrd_local
619	END INTERFACE module_interface_wrd_local
620
621	INTERFACE module_interface_last_actions
622	MODULE PROCEDURE module_interface_last_actions
623	END INTERFACE module_interface_last_actions
624
625
626	CONTAINS
627
628
629	!------------------------------------------------------------------------------!
630	! Description:
631	! ------------
632	!> Read module-specific parameter namelists
633	!------------------------------------------------------------------------------!
634	SUBROUTINE module_interface_parin
635
636
637	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
638
639	CALL dynamics_parin
640
641	CALL bio_parin
642	CALL bcm_parin
643	CALL chem_parin
644	CALL flight_parin ! ToDo: rename module to match filename
645	CALL gust_parin
646	CALL im_parin
647	CALL lpm_parin
648	CALL lsm_parin
649	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
650	CALL mas_parin
651	CALL nesting_offl_parin
652	CALL ocean_parin
653	CALL pcm_parin
654	CALL radiation_parin
655	CALL salsa_parin
656	CALL spectra_parin
657	CALL surface_data_output_parin
658	CALL stg_parin
659	CALL usm_parin
660	CALL vm_parin
661	CALL wtm_parin
662
663	CALL user_parin
664
665	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
666
667
668	END SUBROUTINE module_interface_parin
669
670
671	!------------------------------------------------------------------------------!
672	! Description:
673	! ------------
674	!> Perform module-specific initialization checks
675	!------------------------------------------------------------------------------!
676	SUBROUTINE module_interface_check_parameters
677
678
679	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
680
681	CALL dynamics_check_parameters
682	CALL tcm_check_parameters
683
684	IF ( bulk_cloud_model ) CALL bcm_check_parameters
685	IF ( air_chemistry ) CALL chem_check_parameters
686	IF ( gust_module_enabled ) CALL gust_check_parameters
687	IF ( indoor_model ) CALL im_check_parameters
688	IF ( particle_advection ) CALL lpm_check_parameters
689	IF ( land_surface ) CALL lsm_check_parameters
690	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
691	IF ( nesting_offline ) CALL nesting_offl_check_parameters
692	IF ( ocean_mode ) CALL ocean_check_parameters
693	IF ( plant_canopy ) CALL pcm_check_parameters
694	IF ( radiation ) CALL radiation_check_parameters
695	IF ( salsa ) CALL salsa_check_parameters
696	IF ( calculate_spectra ) CALL spectra_check_parameters
697	IF ( surface_output ) CALL surface_data_output_check_parameters
698	IF ( syn_turb_gen ) CALL stg_check_parameters
699	IF ( urban_surface ) CALL usm_check_parameters
700	IF ( virtual_measurement ) CALL vm_check_parameters
701	IF ( wind_turbine ) CALL wtm_check_parameters
702
703	IF ( user_module_enabled ) CALL user_check_parameters
704
705	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
706
707
708	END SUBROUTINE module_interface_check_parameters
709
710
711	!------------------------------------------------------------------------------!
712	! Description:
713	! ------------
714	!> Check module-specific data output of timeseries
715	!------------------------------------------------------------------------------!
716	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
717
718
719	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
720	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
721	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
722	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
723
724
725	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
726
727	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
728
729	IF ( radiation ) THEN
730	CALL radiation_check_data_output_ts( dots_max, dots_num )
731	ENDIF
732
733	IF ( user_module_enabled ) THEN
734	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
735	ENDIF
736
737	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
738
739
740	END SUBROUTINE module_interface_check_data_output_ts
741
742
743	!------------------------------------------------------------------------------!
744	! Description:
745	! ------------
746	!> Check module-specific data output of profiles
747	!------------------------------------------------------------------------------!
748	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
749	dopr_unit )
750
751
752	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
753	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
754	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
755	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
756
757
758	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
759
760	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
761
762	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
763	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
764	ENDIF
765
766	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
767	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
768	ENDIF
769
770	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
771	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
772	ENDIF
773
774	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
775	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
776	ENDIF
777
778	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
779	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
780	ENDIF
781
782	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
783	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
784	ENDIF
785
786	IF ( unit == 'illegal' .AND. radiation ) THEN
787	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
788	ENDIF
789
790	IF ( unit == 'illegal' .AND. salsa ) THEN
791	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
792	ENDIF
793
794	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
795	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
796	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
797	ENDIF
798
799	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
800
801
802	END SUBROUTINE module_interface_check_data_output_pr
803
804	!------------------------------------------------------------------------------!
805	! Description:
806	! ------------
807	!> Check module-specific 2D and 3D data output
808	!------------------------------------------------------------------------------!
809	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
810
811
812	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
813	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
814
815	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
816	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
817	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
818	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
819
820
821	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
822
823	CALL dynamics_check_data_output( variable, unit )
824
825	CALL tcm_check_data_output( variable, unit )
826
827	IF ( unit == 'illegal' .AND. biometeorology ) THEN
828	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
829	ENDIF
830
831	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
832	CALL bcm_check_data_output( variable, unit )
833	ENDIF
834
835	IF ( unit == 'illegal' .AND. air_chemistry &
836	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
837	CALL chem_check_data_output( variable, unit, i, ilen, k )
838	ENDIF
839
840	IF ( unit == 'illegal' ) THEN
841	CALL doq_check_data_output( variable, unit )
842	ENDIF
843
844	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
845	CALL gust_check_data_output( variable, unit )
846	ENDIF
847
848	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
849	CALL lsm_check_data_output( variable, unit, i, ilen, k )
850	ENDIF
851
852	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
853	CALL ocean_check_data_output( variable, unit )
854	ENDIF
855
856	IF ( unit == 'illegal' .AND. plant_canopy &
857	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
858	CALL pcm_check_data_output( variable, unit )
859	ENDIF
860
861	IF ( unit == 'illegal' .AND. radiation ) THEN
862	CALL radiation_check_data_output( variable, unit, i, ilen, k )
863	ENDIF
864
865	IF ( unit == 'illegal' .AND. salsa ) THEN
866	CALL salsa_check_data_output( variable, unit )
867	ENDIF
868
869	IF ( unit == 'illegal' .AND. indoor_model ) THEN
870	CALL im_check_data_output( variable, unit )
871	ENDIF
872
873	IF ( unit == 'illegal' .AND. urban_surface &
874	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
875	CALL usm_check_data_output( variable, unit )
876	ENDIF
877
878	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
879	unit = ''
880	CALL user_check_data_output( variable, unit )
881	ENDIF
882
883	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
884
885
886	END SUBROUTINE module_interface_check_data_output
887
888
889	!------------------------------------------------------------------------------!
890	!
891	! Description:
892	! ------------
893	!> Interface for init_masks. ToDo: get rid of these redundant calls!
894	!------------------------------------------------------------------------------!
895	SUBROUTINE module_interface_init_masks( variable, unit )
896
897
898	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
899	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
900
901
902	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
903
904	CALL dynamics_init_masks( variable, unit )
905
906	IF ( unit == 'illegal' .AND. air_chemistry &
907	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
908	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
909	ENDIF
910
911	IF ( unit == 'illegal' ) THEN
912	CALL doq_check_data_output( variable, unit )
913	ENDIF
914
915	IF ( unit == 'illegal' .AND. radiation ) THEN
916	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
917	ENDIF
918
919	IF ( unit == 'illegal' .AND. salsa ) THEN
920	CALL salsa_check_data_output( variable, unit )
921	ENDIF
922
923	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
924	unit = ''
925	CALL user_check_data_output( variable, unit )
926	ENDIF
927
928	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
929
930
931	END SUBROUTINE module_interface_init_masks
932
933
934	!------------------------------------------------------------------------------!
935	!
936	! Description:
937	! ------------
938	!> Define appropriate grid for module-specific netcdf output variables.
939	!------------------------------------------------------------------------------!
940	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
941	grid_x, grid_y, grid_z )
942
943
944	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
945	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
946	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
947	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
948	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
949
950
951	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
952	!
953	!-- As long as no action is done in this subroutine, initialize strings with
954	!-- intent(out) attribute, in order to avoid compiler warnings.
955	found = .FALSE.
956	grid_x = 'none'
957	grid_y = 'none'
958	grid_z = 'none'
959	!
960	!-- Use var to avoid compiler warning about unused variable
961	IF ( var == ' ' ) RETURN
962
963	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
964
965
966	END SUBROUTINE module_interface_define_netcdf_grid
967
968
969	!------------------------------------------------------------------------------!
970	! Description:
971	! ------------
972	!> Allocate module-specific arrays and pointers
973	!------------------------------------------------------------------------------!
974	SUBROUTINE module_interface_init_arrays
975
976
977	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
978
979	CALL dynamics_init_arrays
980	CALL tcm_init_arrays
981
982	IF ( bulk_cloud_model ) CALL bcm_init_arrays
983	IF ( air_chemistry ) CALL chem_init_arrays
984	IF ( gust_module_enabled ) CALL gust_init_arrays
985	IF ( particle_advection ) CALL lpm_init_arrays
986	IF ( land_surface ) CALL lsm_init_arrays
987	IF ( ocean_mode ) CALL ocean_init_arrays
988	IF ( salsa ) CALL salsa_init_arrays
989	IF ( urban_surface ) CALL usm_init_arrays
990	IF ( surface_output ) CALL surface_data_output_init_arrays
991	IF ( wind_turbine ) CALL wtm_init_arrays
992
993	IF ( user_module_enabled ) CALL user_init_arrays
994
995	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
996
997
998	END SUBROUTINE module_interface_init_arrays
999
1000
1001	!------------------------------------------------------------------------------!
1002	! Description:
1003	! ------------
1004	!> Perform module-specific initialization
1005	!------------------------------------------------------------------------------!
1006	SUBROUTINE module_interface_init
1007
1008
1009	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1010
1011	CALL dynamics_init
1012	CALL tcm_init
1013
1014	IF ( biometeorology ) CALL bio_init
1015	IF ( bulk_cloud_model ) CALL bcm_init
1016	IF ( air_chemistry ) CALL chem_init
1017	IF ( virtual_flight ) CALL flight_init
1018	IF ( gust_module_enabled ) CALL gust_init
1019	IF ( indoor_model ) CALL im_init
1020	IF ( particle_advection ) CALL lpm_init
1021	IF ( large_scale_forcing ) CALL lsf_init
1022	IF ( land_surface ) CALL lsm_init
1023	IF ( nudging ) CALL nudge_init
1024	IF ( ocean_mode ) CALL ocean_init
1025	IF ( plant_canopy ) CALL pcm_init
1026	IF ( salsa ) CALL salsa_init
1027	IF ( urban_surface ) CALL usm_init
1028	IF ( virtual_measurement ) CALL vm_init
1029	IF ( wind_turbine ) CALL wtm_init
1030	IF ( radiation ) CALL radiation_init
1031
1032	IF ( user_module_enabled ) CALL user_init
1033
1034	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1035
1036
1037	END SUBROUTINE module_interface_init
1038
1039
1040	!------------------------------------------------------------------------------!
1041	! Description:
1042	! ------------
1043	!> Perform module-specific post-initialization checks
1044	!------------------------------------------------------------------------------!
1045	SUBROUTINE module_interface_init_checks
1046
1047
1048	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1049
1050	CALL dynamics_init_checks
1051
1052	IF ( biometeorology ) CALL bio_init_checks
1053
1054	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1055
1056
1057	END SUBROUTINE module_interface_init_checks
1058
1059
1060	!------------------------------------------------------------------------------!
1061	! Description:
1062	! ------------
1063	!> Gather module-specific header output
1064	!------------------------------------------------------------------------------!
1065	SUBROUTINE module_interface_header( io )
1066
1067
1068	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1069
1070
1071	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1072
1073	CALL dynamics_header( io )
1074
1075	IF ( biometeorology ) CALL bio_header ( io )
1076	IF ( bulk_cloud_model ) CALL bcm_header( io )
1077	IF ( air_chemistry ) CALL chem_header ( io )
1078	IF ( virtual_flight ) CALL flight_header( io )
1079	IF ( gust_module_enabled ) CALL gust_header( io )
1080	IF ( particle_advection ) CALL lpm_header( io )
1081	IF ( land_surface ) CALL lsm_header( io )
1082	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1083	IF ( nesting_offline ) CALL nesting_offl_header( io )
1084	IF ( ocean_mode ) CALL ocean_header( io )
1085	IF ( plant_canopy ) CALL pcm_header( io )
1086	IF ( radiation ) CALL radiation_header( io )
1087	IF ( salsa ) CALL salsa_header( io )
1088	IF ( calculate_spectra ) CALL spectra_header( io )
1089	IF ( syn_turb_gen ) CALL stg_header( io )
1090
1091	IF ( user_module_enabled ) CALL user_header( io )
1092
1093	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1094
1095
1096	END SUBROUTINE module_interface_header
1097
1098
1099	!------------------------------------------------------------------------------!
1100	! Description:
1101	! ------------
1102	!> Perform module-specific actions while in time-integration (vector-optimized)
1103	!------------------------------------------------------------------------------!
1104	SUBROUTINE module_interface_actions( location )
1105
1106
1107	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1108
1109	CALL dynamics_actions( location )
1110	CALL tcm_actions( location )
1111
1112	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1113	IF ( air_chemistry ) CALL chem_actions( location )
1114	IF ( gust_module_enabled ) CALL gust_actions( location )
1115	IF ( particle_advection ) CALL lpm_actions( location )
1116	IF ( ocean_mode ) CALL ocean_actions( location )
1117	IF ( salsa ) CALL salsa_actions( location )
1118	IF ( wind_turbine ) CALL wtm_actions( location )
1119
1120	IF ( user_module_enabled ) CALL user_actions( location )
1121
1122
1123	END SUBROUTINE module_interface_actions
1124
1125
1126	!------------------------------------------------------------------------------!
1127	! Description:
1128	! ------------
1129	!> Perform module-specific actions while in time-integration (cache-optimized)
1130	!------------------------------------------------------------------------------!
1131	SUBROUTINE module_interface_actions_ij( i, j, location )
1132
1133
1134	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1135	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1136	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1137
1138	CALL dynamics_actions( i, j, location )
1139	CALL tcm_actions( i, j, location )
1140
1141	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1142	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1143	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1144	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1145	IF ( salsa ) CALL salsa_actions( i, j, location )
1146	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1147
1148	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1149
1150
1151	END SUBROUTINE module_interface_actions_ij
1152
1153
1154	!------------------------------------------------------------------------------!
1155	! Description:
1156	! ------------
1157	!> Compute module-specific non_advective_processes (vector-optimized)
1158	!------------------------------------------------------------------------------!
1159	SUBROUTINE module_interface_non_advective_processes
1160
1161
1162	CALL dynamics_non_advective_processes
1163
1164	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1165	IF ( air_chemistry ) CALL chem_non_advective_processes
1166	IF ( salsa ) CALL salsa_non_advective_processes
1167
1168
1169	END SUBROUTINE module_interface_non_advective_processes
1170
1171
1172	!------------------------------------------------------------------------------!
1173	! Description:
1174	! ------------
1175	!> Compute module-specific non_advective_processes (cache-optimized)
1176	!------------------------------------------------------------------------------!
1177	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1178
1179
1180	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1181	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1182
1183	CALL dynamics_non_advective_processes( i, j )
1184
1185	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1186	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1187	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1188
1189
1190	END SUBROUTINE module_interface_non_advective_processes_ij
1191
1192	!------------------------------------------------------------------------------!
1193	! Description:
1194	! ------------
1195	!> Exchange horiz for module-specific quantities
1196	!------------------------------------------------------------------------------!
1197	SUBROUTINE module_interface_exchange_horiz
1198
1199
1200	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1201
1202	CALL dynamics_exchange_horiz
1203
1204	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1205	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1206	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1207
1208	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1209
1210
1211	END SUBROUTINE module_interface_exchange_horiz
1212
1213
1214	!------------------------------------------------------------------------------!
1215	! Description:
1216	! ------------
1217	!> Compute module-specific prognostic_equations (vector-optimized)
1218	!------------------------------------------------------------------------------!
1219	SUBROUTINE module_interface_prognostic_equations
1220
1221
1222	CALL dynamics_prognostic_equations
1223	CALL tcm_prognostic_equations
1224
1225	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1226	IF ( air_chemistry ) CALL chem_prognostic_equations
1227	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1228	IF ( ocean_mode ) CALL ocean_prognostic_equations
1229	IF ( salsa ) CALL salsa_prognostic_equations
1230
1231
1232	END SUBROUTINE module_interface_prognostic_equations
1233
1234
1235	!------------------------------------------------------------------------------!
1236	! Description:
1237	! ------------
1238	!> Compute module-specific prognostic_equations (cache-optimized)
1239	!------------------------------------------------------------------------------!
1240	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1241
1242
1243	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1244	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1245	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1246	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1247
1248	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1249	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1250
1251	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1252	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1253	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1254	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1255	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1256
1257
1258	END SUBROUTINE module_interface_prognostic_equations_ij
1259
1260
1261	!------------------------------------------------------------------------------!
1262	! Description:
1263	! ------------
1264	!> Swap the timelevel pointers for module-specific arrays
1265	!------------------------------------------------------------------------------!
1266	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1267
1268
1269	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1270
1271
1272	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1273
1274	CALL dynamics_swap_timelevel( swap_mode )
1275	CALL tcm_swap_timelevel( swap_mode )
1276
1277	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1278	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1279	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1280	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1281	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1282	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1283	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1284
1285	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1286
1287
1288	END SUBROUTINE module_interface_swap_timelevel
1289
1290
1291	!------------------------------------------------------------------------------!
1292	!
1293	! Description:
1294	! ------------
1295	!> Perform module-specific averaging of 3D data
1296	!------------------------------------------------------------------------------!
1297	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1298
1299
1300	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1301	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1302
1303
1304	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1305
1306	CALL dynamics_3d_data_averaging( mode, variable )
1307	CALL tcm_3d_data_averaging( mode, variable )
1308
1309	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1310	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1311	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1312	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1313	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1314	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1315	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1316	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1317	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1318	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1319	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1320
1321	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1322
1323	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1324
1325
1326	END SUBROUTINE module_interface_3d_data_averaging
1327
1328	!------------------------------------------------------------------------------!
1329	!
1330	! Description:
1331	! ------------
1332	!> Define module-specific 2D output variables
1333	!------------------------------------------------------------------------------!
1334	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1335	local_pf, two_d, nzb_do, nzt_do, &
1336	fill_value )
1337
1338	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1339	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1340	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1341	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1342	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1343	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1344	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1345	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1346	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1347
1348	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1349
1350
1351	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1352
1353	CALL dynamics_data_output_2d( &
1354	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1355	)
1356
1357	IF ( .NOT. found ) THEN
1358	CALL tcm_data_output_2d( &
1359	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1360	)
1361	ENDIF
1362
1363	IF ( .NOT. found .AND. biometeorology ) THEN
1364	CALL bio_data_output_2d( &
1365	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1366	)
1367	ENDIF
1368
1369	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1370	CALL bcm_data_output_2d( &
1371	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1372	)
1373	ENDIF
1374
1375	IF ( .NOT. found .AND. air_chemistry ) THEN
1376	CALL chem_data_output_2d( &
1377	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1378	)
1379	ENDIF
1380
1381	IF ( .NOT. found ) THEN
1382	CALL doq_output_2d( &
1383	av, variable, found, grid, mode, local_pf, two_d, &
1384	nzb_do, nzt_do, fill_value )
1385	ENDIF
1386
1387	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1388	CALL gust_data_output_2d( &
1389	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1390	)
1391	ENDIF
1392
1393	IF ( .NOT. found .AND. land_surface ) THEN
1394	CALL lsm_data_output_2d( &
1395	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1396	)
1397	ENDIF
1398
1399	IF ( .NOT. found .AND. ocean_mode ) THEN
1400	CALL ocean_data_output_2d( &
1401	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1402	)
1403	ENDIF
1404
1405	IF ( .NOT. found .AND. radiation ) THEN
1406	CALL radiation_data_output_2d( &
1407	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1408	)
1409	ENDIF
1410
1411	IF ( .NOT. found .AND. salsa ) THEN
1412	CALL salsa_data_output_2d( &
1413	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1414	)
1415	ENDIF
1416
1417	IF ( .NOT. found .AND. user_module_enabled ) THEN
1418	CALL user_data_output_2d( &
1419	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1420	)
1421	ENDIF
1422
1423	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1424
1425
1426	END SUBROUTINE module_interface_data_output_2d
1427
1428
1429	!------------------------------------------------------------------------------!
1430	!
1431	! Description:
1432	! ------------
1433	!> Define module-specific 3D output variables
1434	!------------------------------------------------------------------------------!
1435	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1436	fill_value, resorted, nzb_do, nzt_do )
1437
1438
1439	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1440	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1441	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1442	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1443	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1444	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1445	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1446
1447	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1448
1449
1450	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1451
1452	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1453	resorted = .FALSE.
1454
1455	IF ( .NOT. found ) THEN
1456	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1457	resorted = .TRUE.
1458	ENDIF
1459
1460	IF ( .NOT. found .AND. biometeorology ) THEN
1461	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1462	resorted = .FALSE.
1463	ENDIF
1464
1465	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1466	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1467	resorted = .TRUE.
1468	ENDIF
1469
1470	IF ( .NOT. found .AND. air_chemistry ) THEN
1471	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1472	resorted = .TRUE.
1473	ENDIF
1474
1475	IF ( .NOT. found ) THEN
1476	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1477	resorted = .TRUE.
1478	ENDIF
1479
1480	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1481	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1482	resorted = .TRUE.
1483	ENDIF
1484
1485	IF ( .NOT. found .AND. indoor_model ) THEN
1486	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1487	resorted = .TRUE.
1488	ENDIF
1489
1490	IF ( .NOT. found .AND. ocean_mode ) THEN
1491	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1492	resorted = .TRUE.
1493	ENDIF
1494
1495	IF ( .NOT. found .AND. plant_canopy ) THEN
1496	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1497	resorted = .TRUE.
1498	ENDIF
1499
1500	IF ( .NOT. found .AND. radiation ) THEN
1501	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1502	resorted = .TRUE.
1503	ENDIF
1504
1505	IF ( .NOT. found .AND. salsa ) THEN
1506	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1507	resorted = .TRUE.
1508	ENDIF
1509
1510	IF ( .NOT. found .AND. user_module_enabled ) THEN
1511	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1512	resorted = .TRUE.
1513	ENDIF
1514
1515	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1516
1517
1518	END SUBROUTINE module_interface_data_output_3d
1519
1520
1521	!------------------------------------------------------------------------------!
1522	! Description:
1523	! ------------
1524	!> Compute module-specific profile and timeseries data
1525	!------------------------------------------------------------------------------!
1526	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1527
1528
1529	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1530	INTEGER(iwp), INTENT(IN) :: sr !<
1531	INTEGER(iwp), INTENT(IN) :: tn !<
1532	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1533
1534
1535	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1536
1537	CALL dynamics_statistics( mode, sr, tn )
1538
1539	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1540	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1541	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1542
1543	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1544
1545	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1546
1547
1548	END SUBROUTINE module_interface_statistics
1549
1550
1551	!------------------------------------------------------------------------------!
1552	! Description:
1553	! ------------
1554	!> Read module-specific restart data globaly shared by all MPI ranks
1555	!------------------------------------------------------------------------------!
1556	SUBROUTINE module_interface_rrd_global( found )
1557
1558
1559	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1560
1561
1562	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1563
1564	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1565
1566	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1567	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1568	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1569	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1570	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1571	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1572	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1573	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1574	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1575
1576	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1577
1578	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1579
1580
1581	END SUBROUTINE module_interface_rrd_global
1582
1583
1584	!------------------------------------------------------------------------------!
1585	! Description:
1586	! ------------
1587	!> Write module-specific restart data globaly shared by all MPI ranks
1588	!------------------------------------------------------------------------------!
1589	SUBROUTINE module_interface_wrd_global
1590
1591
1592	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1593
1594	CALL dynamics_wrd_global
1595
1596	IF ( biometeorology ) CALL bio_wrd_global
1597	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1598	IF ( virtual_flight ) CALL flight_wrd_global
1599	IF ( gust_module_enabled ) CALL gust_wrd_global
1600	IF ( ocean_mode ) CALL ocean_wrd_global
1601	IF ( syn_turb_gen ) CALL stg_wrd_global
1602	IF ( wind_turbine ) CALL wtm_wrd_global
1603	IF ( surface_output ) CALL surface_data_output_wrd_global
1604
1605	IF ( user_module_enabled ) CALL user_wrd_global
1606
1607	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1608
1609
1610	END SUBROUTINE module_interface_wrd_global
1611
1612
1613	!------------------------------------------------------------------------------!
1614	! Description:
1615	! ------------
1616	!> Read module-specific restart data specific to local MPI ranks
1617	!------------------------------------------------------------------------------!
1618	SUBROUTINE module_interface_rrd_local( map_index, &
1619	nxlf, nxlc, nxl_on_file, &
1620	nxrf, nxrc, nxr_on_file, &
1621	nynf, nync, nyn_on_file, &
1622	nysf, nysc, nys_on_file, &
1623	tmp_2d, tmp_3d, found )
1624
1625
1626	INTEGER(iwp), INTENT(IN) :: map_index !<
1627	INTEGER(iwp), INTENT(IN) :: nxlc !<
1628	INTEGER(iwp), INTENT(IN) :: nxlf !<
1629	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1630	INTEGER(iwp), INTENT(IN) :: nxrc !<
1631	INTEGER(iwp), INTENT(IN) :: nxrf !<
1632	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1633	INTEGER(iwp), INTENT(IN) :: nync !<
1634	INTEGER(iwp), INTENT(IN) :: nynf !<
1635	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1636	INTEGER(iwp), INTENT(IN) :: nysc !<
1637	INTEGER(iwp), INTENT(IN) :: nysf !<
1638	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1639	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1640
1641	REAL(wp), &
1642	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1643	INTENT(OUT) :: tmp_2d !<
1644	REAL(wp), &
1645	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1646	INTENT(OUT) :: tmp_3d !<
1647
1648
1649	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1650
1651	CALL dynamics_rrd_local( &
1652	map_index, &
1653	nxlf, nxlc, nxl_on_file, &
1654	nxrf, nxrc, nxr_on_file, &
1655	nynf, nync, nyn_on_file, &
1656	nysf, nysc, nys_on_file, &
1657	tmp_2d, tmp_3d, found &
1658	) ! ToDo: change interface to pass variable
1659
1660	IF ( .NOT. found ) CALL bio_rrd_local( &
1661	found &
1662	)
1663
1664	IF ( .NOT. found ) CALL bcm_rrd_local( &
1665	map_index, &
1666	nxlf, nxlc, nxl_on_file, &
1667	nxrf, nxrc, nxr_on_file, &
1668	nynf, nync, nyn_on_file, &
1669	nysf, nysc, nys_on_file, &
1670	tmp_2d, tmp_3d, found &
1671	) ! ToDo: change interface to pass variable
1672
1673	IF ( .NOT. found ) CALL chem_rrd_local( &
1674	map_index, &
1675	nxlf, nxlc, nxl_on_file, &
1676	nxrf, nxrc, nxr_on_file, &
1677	nynf, nync, nyn_on_file, &
1678	nysf, nysc, nys_on_file, &
1679	tmp_3d, found &
1680	) ! ToDo: change interface to pass variable
1681
1682	! IF ( .NOT. found ) CALL doq_rrd_local( &
1683	! map_index, &
1684	! nxlf, nxlc, nxl_on_file, &
1685	! nxrf, nxrc, nxr_on_file, &
1686	! nynf, nync, nyn_on_file, &
1687	! nysf, nysc, nys_on_file, &
1688	! tmp_3d_non_standard, found &
1689	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1690
1691	IF ( .NOT. found ) CALL gust_rrd_local( &
1692	map_index, &
1693	nxlf, nxlc, nxl_on_file, &
1694	nxrf, nxrc, nxr_on_file, &
1695	nynf, nync, nyn_on_file, &
1696	nysf, nysc, nys_on_file, &
1697	tmp_2d, tmp_3d, found &
1698	) ! ToDo: change interface to pass variable
1699
1700	IF ( .NOT. found ) CALL lpm_rrd_local( &
1701	map_index, &
1702	nxlf, nxlc, nxl_on_file, &
1703	nxrf, nxrc, nxr_on_file, &
1704	nynf, nync, nyn_on_file, &
1705	nysf, nysc, nys_on_file, &
1706	tmp_3d, found &
1707	) ! ToDo: change interface to pass variable
1708
1709	IF ( .NOT. found ) CALL lsm_rrd_local( &
1710	map_index, &
1711	nxlf, nxlc, nxl_on_file, &
1712	nxrf, nxrc, nxr_on_file, &
1713	nynf, nync, nyn_on_file, &
1714	nysf, nysc, nys_on_file, &
1715	tmp_2d, found &
1716	) ! ToDo: change interface to pass variable
1717
1718	IF ( .NOT. found ) CALL ocean_rrd_local( &
1719	map_index, &
1720	nxlf, nxlc, nxl_on_file, &
1721	nxrf, nxrc, nxr_on_file, &
1722	nynf, nync, nyn_on_file, &
1723	nysf, nysc, nys_on_file, &
1724	tmp_3d, found &
1725	) ! ToDo: change interface to pass variable
1726
1727	IF ( .NOT. found ) CALL radiation_rrd_local( &
1728	map_index, &
1729	nxlf, nxlc, nxl_on_file, &
1730	nxrf, nxrc, nxr_on_file, &
1731	nynf, nync, nyn_on_file, &
1732	nysf, nysc, nys_on_file, &
1733	tmp_2d, tmp_3d, found &
1734	) ! ToDo: change interface to pass variable
1735
1736	IF ( .NOT. found ) CALL salsa_rrd_local( &
1737	map_index, &
1738	nxlf, nxlc, nxl_on_file, &
1739	nxrf, nxrc, nxr_on_file, &
1740	nynf, nync, nyn_on_file, &
1741	nysf, nysc, nys_on_file, &
1742	tmp_3d, found &
1743	) ! ToDo: change interface to pass variable
1744
1745	IF ( .NOT. found ) CALL usm_rrd_local( &
1746	map_index, &
1747	nxlf, nxlc, nxl_on_file, &
1748	nxrf, nxr_on_file, &
1749	nynf, nyn_on_file, &
1750	nysf, nysc, nys_on_file, &
1751	found &
1752	) ! ToDo: change interface to pass variable
1753	!
1754	!-- Surface data do not need overlap data, so do not pass these information.
1755	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1756
1757	IF ( .NOT. found ) CALL user_rrd_local( &
1758	map_index, &
1759	nxlf, nxlc, nxl_on_file, &
1760	nxrf, nxrc, nxr_on_file, &
1761	nynf, nync, nyn_on_file, &
1762	nysf, nysc, nys_on_file, &
1763	tmp_3d, found &
1764	) ! ToDo: change interface to pass variable
1765
1766	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1767
1768
1769	END SUBROUTINE module_interface_rrd_local
1770
1771
1772	!------------------------------------------------------------------------------!
1773	! Description:
1774	! ------------
1775	!> Write module-specific restart data specific to local MPI ranks
1776	!------------------------------------------------------------------------------!
1777	SUBROUTINE module_interface_wrd_local
1778
1779
1780	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1781
1782	CALL dynamics_wrd_local
1783
1784	IF ( biometeorology ) CALL bio_wrd_local
1785	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1786	IF ( air_chemistry ) CALL chem_wrd_local
1787	CALL doq_wrd_local
1788	IF ( gust_module_enabled ) CALL gust_wrd_local
1789	IF ( particle_advection ) CALL lpm_wrd_local
1790	IF ( land_surface ) CALL lsm_wrd_local
1791	IF ( ocean_mode ) CALL ocean_wrd_local
1792	IF ( radiation ) CALL radiation_wrd_local
1793	IF ( salsa ) CALL salsa_wrd_local
1794	IF ( urban_surface ) CALL usm_wrd_local
1795	IF ( surface_output ) CALL surface_data_output_wrd_local
1796
1797	IF ( user_module_enabled ) CALL user_wrd_local
1798
1799	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1800
1801
1802	END SUBROUTINE module_interface_wrd_local
1803
1804
1805	!------------------------------------------------------------------------------!
1806	! Description:
1807	! ------------
1808	!> Perform module-specific last actions before the program terminates
1809	!------------------------------------------------------------------------------!
1810	SUBROUTINE module_interface_last_actions
1811
1812
1813	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1814
1815	CALL dynamics_last_actions
1816
1817	IF ( virtual_measurement ) CALL vm_last_actions
1818
1819	IF ( user_module_enabled ) CALL user_last_actions
1820
1821	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1822
1823
1824	END SUBROUTINE module_interface_last_actions
1825
1826
1827	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |