Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4356

Last change on this file since 4356 was 4331, checked in by suehring, 5 years ago
New diagnostic output for 10-m wind speed; Diagnostic output of 2-m potential temperature moved to diagnostic output
Property svn:keywords set to `Id`
File size: 84.4 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4331 2019-12-10 18:25:02Z suehring $
27	! Change interface for doq_check_data_output, in order to perform further
28	! output checks.
29	!
30	! 4281 2019-10-29 15:15:39Z schwenkel
31	! Added dynamics boundary conditions
32	!
33	! 4272 2019-10-23 15:18:57Z schwenkel
34	! Further modularization of boundary conditions: moved boundary conditions to
35	! respective modules
36	!
37	! 4268 2019-10-17 11:29:38Z schwenkel
38	! Introduction of module_interface_boundary_conditions
39	!
40	! 4182 2019-08-22 15:20:23Z scharf
41	! Corrected "Former revisions" section
42	!
43	! 4173 2019-08-20 12:04:06Z gronemeier
44	! add vdi_internal_controls
45	!
46	! 4157 2019-08-14 09:19:12Z suehring
47	! Call doq_init from module interface
48	!
49	! 4132 2019-08-02 12:34:17Z suehring
50	! Bugfix in masked data output for diagnostic quantities
51	!
52	! 4131 2019-08-02 11:06:18Z monakurppa
53	! Add output of 3D plant-canopy outputs (merge from branch resler)
54	!
55	! 4048 2019-06-21 21:00:21Z knoop
56	! Moved turbulence_closure_mod calls into this module_interface
57	!
58	! 4047 2019-06-21 18:58:09Z knoop
59	! Introduction of the dynamics module
60	!
61	! 4039 2019-06-18 10:32:41Z suehring
62	! Introduce diagnostic output
63	!
64	! 4028 2019-06-13 12:21:37Z schwenkel
65	! Further modularization of particle code components
66	!
67	! 4017 2019-06-06 12:16:46Z schwenkel
68	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
69	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
70	! are not defined everywhere, e.g. land-surface outputs, this will be
71	! problematic as NaN will be output.
72	!
73	! 3987 2019-05-22 09:52:13Z kanani
74	! Introduce switchable DEBUG file output via debug_message routine
75	!
76	! 3956 2019-05-07 12:32:52Z monakurppa
77	! - Added calls for salsa_non_advective_processes and
78	! salsa_exchange_horiz_bounds
79	! - Moved the call for salsa_data_output_2d/3d before that of
80	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
81	! salsa output variable and encounters a segmentation fault for "Ntot" due
82	! to the shortoutput name
83	!
84	! 3931 2019-04-24 16:34:28Z schwenkel
85	! Changed non_transport_physics to non_advective_processes
86	!
87	! 3930 2019-04-24 14:57:18Z forkel
88	! Correct/complete module_interface introduction for chemistry model
89	!
90	! 3887 2019 -04-12 08:47:41Z schwenkel
91	! Changes related to global restructuring of location messages and introduction
92	! of additional debug messages
93	!
94	! 3880 2019 -04-08 21:43:02Z knoop
95	! Add a call for salsa_prognostic_equations
96	!
97	! 3840 2019-03-29 10:35:52Z knoop
98	! bugfix: intent of dummy arguments changed to inout
99	!
100	! 3770 2019-02-28 11:22:32Z moh.hefny
101	! removed unused variables in module_interface_check_data_output_ts
102	!
103	! 3767 08:18:02Z raasch
104	! unused variable file_index removed from subroutine parameter list
105	!
106	! 3766 2019-02-26 16:23:41Z raasch
107	! first argument removed from module_interface_rrd_*, statement added to avoid
108	! compiler warning about unused variable, file reformatted with respect to coding
109	! standards
110	!
111	! 3762 2019-02-25 16:54:16Z suehring
112	! only pass required arguments to surface_data_output_rrd_local
113	!
114	! 3747 2019-02-16 15:15:23Z gronemeier
115	! Call user_init_arrays
116	!
117	! 3745 2019-02-15 18:57:56Z suehring
118	! Add indoor model
119	!
120	! 3744 2019-02-15 18:38:58Z suehring
121	! Removed bio_check_parameters as the method is empty.
122	!
123	! 3735 2019-02-12 09:52:40Z dom_dwd_user
124	! Accepting variable j from check_parameters and passing it to
125	! bio_check_data_output
126	! Add required restart data for surface output module
127	!
128	! 3731 2019-02-11 13:06:27Z suehring
129	! Add check_parameters routine for virtual measurements
130	!
131	! 3711 2019-01-31 13:44:26Z knoop
132	! Introduced module_interface_init_checks for post-init checks
133	!
134	! 3705 2019-01-29 19:56:39Z suehring
135	! Add last_actions for virtual measurements
136	!
137	! 3704 2019-01-29 19:51:41Z suehring
138	! Some interface calls moved to module_interface + cleanup
139	!
140	! 3684 2019-01-20 20:20:58Z knoop
141	! Bugfix: made unit intend INOUT
142	!
143	! 3650 2019-01-04 13:01:33Z kanani
144	! Add restart routines for biometeorology
145	!
146	! 3649 2019-01-02 16:52:21Z suehring
147	! Initialize strings, in order to avoid compiler warnings for non-initialized
148	! characters with intent(out) attribute
149	!
150	! 3648 2019-01-02 16:35:46Z suehring
151	! 3641 2018-12-23 22:10:01Z knoop
152	! Initial implementation of the PALM module interface
153	!
154	!
155	! Description:
156	! ------------
157	!> This is the interface between the PALM model core and all its modules.
158	!>
159	!> @todo Re-format module to be consistent with coding standard
160	!------------------------------------------------------------------------------!
161	MODULE module_interface
162
163	USE indices, &
164	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
165
166	USE kinds
167
168	!
169	!-- load module-specific control parameters.
170	!-- ToDo: move all of them to respective module or a dedicated central module
171
172	USE dynamics_mod, &
173	ONLY: dynamics_parin, &
174	dynamics_check_parameters, &
175	dynamics_check_data_output_ts, &
176	dynamics_check_data_output_pr, &
177	dynamics_check_data_output, &
178	dynamics_init_masks, &
179	dynamics_define_netcdf_grid, &
180	dynamics_init_arrays, &
181	dynamics_init, &
182	dynamics_init_checks, &
183	dynamics_header, &
184	dynamics_actions, &
185	dynamics_non_advective_processes, &
186	dynamics_exchange_horiz, &
187	dynamics_prognostic_equations, &
188	dynamics_boundary_conditions, &
189	dynamics_swap_timelevel, &
190	dynamics_3d_data_averaging, &
191	dynamics_data_output_2d, &
192	dynamics_data_output_3d, &
193	dynamics_statistics, &
194	dynamics_rrd_global, &
195	dynamics_rrd_local, &
196	dynamics_wrd_global, &
197	dynamics_wrd_local, &
198	dynamics_last_actions
199
200	USE turbulence_closure_mod, &
201	ONLY: tcm_check_parameters, &
202	tcm_check_data_output, &
203	tcm_init_arrays, &
204	tcm_init, &
205	tcm_actions, &
206	tcm_prognostic_equations, &
207	tcm_boundary_conds, &
208	tcm_swap_timelevel, &
209	tcm_3d_data_averaging, &
210	tcm_data_output_2d, &
211	tcm_data_output_3d
212
213	USE control_parameters, &
214	ONLY: air_chemistry, &
215	biometeorology, &
216	debug_output, &
217	debug_output_timestep, &
218	indoor_model, &
219	land_surface, &
220	large_scale_forcing, &
221	nesting_offline, &
222	nudging, &
223	ocean_mode, &
224	plant_canopy, &
225	salsa, &
226	surface_output, &
227	syn_turb_gen, &
228	urban_surface, &
229	vdi_checks, &
230	virtual_flight, &
231	virtual_measurement, &
232	wind_turbine
233
234	!
235	!-- load interface routines of all PALM modules
236	USE biometeorology_mod, &
237	ONLY: bio_parin, &
238	bio_check_data_output, &
239	bio_init, &
240	bio_init_checks, &
241	bio_header, &
242	bio_3d_data_averaging, &
243	bio_data_output_2d, &
244	bio_data_output_3d, &
245	bio_rrd_global, &
246	bio_rrd_local, &
247	bio_wrd_global, &
248	bio_wrd_local
249
250	USE bulk_cloud_model_mod, &
251	ONLY: bulk_cloud_model, &
252	bcm_parin, &
253	bcm_check_parameters, &
254	bcm_check_data_output_pr, &
255	bcm_check_data_output, &
256	bcm_init_arrays, &
257	bcm_init, &
258	bcm_header, &
259	bcm_actions, &
260	bcm_non_advective_processes, &
261	bcm_exchange_horiz, &
262	bcm_prognostic_equations, &
263	bcm_boundary_conditions, &
264	bcm_swap_timelevel, &
265	bcm_3d_data_averaging, &
266	bcm_data_output_2d, &
267	bcm_data_output_3d, &
268	bcm_rrd_global, &
269	bcm_wrd_global, &
270	bcm_rrd_local, &
271	bcm_wrd_local
272
273	USE chemistry_model_mod, &
274	ONLY: chem_parin, &
275	chem_check_parameters, &
276	chem_check_data_output_pr, &
277	chem_check_data_output, &
278	chem_exchange_horiz_bounds, &
279	chem_init_arrays, &
280	chem_init, &
281	chem_header, &
282	chem_actions, &
283	chem_non_advective_processes, &
284	chem_prognostic_equations, &
285	chem_boundary_conditions, &
286	chem_swap_timelevel, &
287	chem_3d_data_averaging, &
288	chem_data_output_2d, &
289	chem_data_output_3d, &
290	chem_statistics, &
291	chem_rrd_local, &
292	chem_wrd_local
293
294	USE diagnostic_output_quantities_mod, &
295	ONLY: doq_3d_data_averaging, &
296	doq_check_data_output, &
297	doq_define_netcdf_grid, &
298	doq_init, &
299	doq_output_2d, &
300	doq_output_3d, &
301	doq_wrd_local
302	! doq_rrd_local, &
303
304	USE flight_mod, &
305	ONLY: flight_parin, &
306	flight_header, &
307	flight_init, &
308	flight_rrd_global, &
309	flight_wrd_global
310
311	USE gust_mod, &
312	ONLY: gust_module_enabled, &
313	gust_parin, &
314	gust_check_parameters, &
315	gust_check_data_output_pr, &
316	gust_check_data_output, &
317	gust_init_arrays, &
318	gust_init, &
319	gust_header, &
320	gust_actions, &
321	gust_prognostic_equations, &
322	gust_swap_timelevel, &
323	gust_3d_data_averaging, &
324	gust_data_output_2d, &
325	gust_data_output_3d, &
326	gust_statistics, &
327	gust_rrd_global, &
328	gust_wrd_global, &
329	gust_rrd_local, &
330	gust_wrd_local
331
332	USE indoor_model_mod, &
333	ONLY: im_parin, &
334	im_check_data_output, &
335	im_check_parameters, &
336	im_data_output_3d, &
337	im_init
338
339	USE lagrangian_particle_model_mod, &
340	ONLY: lpm_parin, &
341	lpm_header, &
342	lpm_check_parameters, &
343	lpm_init_arrays, &
344	lpm_init, &
345	lpm_actions, &
346	lpm_rrd_global, &
347	lpm_rrd_local, &
348	lpm_wrd_local, &
349	lpm_wrd_global
350
351	USE land_surface_model_mod, &
352	ONLY: lsm_parin, &
353	lsm_check_parameters, &
354	lsm_check_data_output_pr, &
355	lsm_check_data_output, &
356	lsm_init_arrays, &
357	lsm_init, &
358	lsm_header, &
359	lsm_swap_timelevel, &
360	lsm_3d_data_averaging, &
361	lsm_data_output_2d, &
362	lsm_rrd_local, &
363	lsm_wrd_local
364
365	USE lsf_nudging_mod, &
366	ONLY: lsf_nudging_check_parameters, &
367	lsf_nudging_check_data_output_pr, &
368	lsf_init, &
369	nudge_init, &
370	lsf_nudging_header
371
372	USE multi_agent_system_mod, &
373	ONLY: mas_parin
374
375	USE nesting_offl_mod, &
376	ONLY: nesting_offl_parin, &
377	nesting_offl_check_parameters, &
378	nesting_offl_header
379
380	USE ocean_mod, &
381	ONLY: ocean_parin, &
382	ocean_check_parameters, &
383	ocean_check_data_output_pr, &
384	ocean_check_data_output, &
385	ocean_init_arrays, &
386	ocean_init, &
387	ocean_header, &
388	ocean_actions, &
389	ocean_prognostic_equations, &
390	ocean_boundary_conditions, &
391	ocean_swap_timelevel, &
392	ocean_3d_data_averaging, &
393	ocean_data_output_2d, &
394	ocean_data_output_3d, &
395	ocean_rrd_global, &
396	ocean_wrd_global, &
397	ocean_rrd_local, &
398	ocean_wrd_local
399
400	USE particle_attributes, &
401	ONLY: particle_advection
402
403	USE plant_canopy_model_mod, &
404	ONLY: pcm_parin, &
405	pcm_check_parameters, &
406	pcm_check_data_output, &
407	pcm_init, &
408	pcm_header, &
409	pcm_3d_data_averaging, &
410	pcm_data_output_3d
411
412	USE radiation_model_mod, &
413	ONLY: radiation, &
414	radiation_parin, &
415	radiation_check_parameters, &
416	radiation_check_data_output_ts, &
417	radiation_check_data_output_pr, &
418	radiation_check_data_output, &
419	radiation_init, &
420	radiation_header, &
421	radiation_3d_data_averaging, &
422	radiation_data_output_2d, &
423	radiation_data_output_3d, &
424	radiation_rrd_local, &
425	radiation_wrd_local
426
427	USE salsa_mod, &
428	ONLY: salsa_parin, &
429	salsa_check_parameters, &
430	salsa_check_data_output_pr, &
431	salsa_check_data_output, &
432	salsa_init_arrays, &
433	salsa_init, &
434	salsa_header, &
435	salsa_actions, &
436	salsa_non_advective_processes, &
437	salsa_exchange_horiz_bounds, &
438	salsa_prognostic_equations, &
439	salsa_boundary_conditions, &
440	salsa_swap_timelevel, &
441	salsa_3d_data_averaging, &
442	salsa_data_output_2d, &
443	salsa_data_output_3d, &
444	salsa_statistics, &
445	salsa_rrd_local, &
446	salsa_wrd_local
447
448	USE spectra_mod, &
449	ONLY: calculate_spectra, &
450	spectra_parin, &
451	spectra_check_parameters, &
452	spectra_header
453
454	USE surface_data_output_mod, &
455	ONLY: surface_data_output_parin, &
456	surface_data_output_check_parameters, &
457	surface_data_output_init_arrays, &
458	surface_data_output_rrd_local, &
459	surface_data_output_rrd_global, &
460	surface_data_output_wrd_local, &
461	surface_data_output_wrd_global
462
463	USE synthetic_turbulence_generator_mod, &
464	ONLY: stg_parin, &
465	stg_check_parameters, &
466	stg_header, &
467	stg_rrd_global, &
468	stg_wrd_global
469
470	USE urban_surface_mod, &
471	ONLY: usm_parin, &
472	usm_check_parameters, &
473	usm_check_data_output, &
474	usm_init_arrays, &
475	usm_init, &
476	usm_swap_timelevel, &
477	usm_3d_data_averaging, &
478	usm_rrd_local, &
479	usm_wrd_local
480
481	USE vdi_internal_controls, &
482	ONLY: vdi_actions
483
484	USE virtual_measurement_mod, &
485	ONLY: vm_check_parameters, &
486	vm_init, &
487	vm_last_actions, &
488	vm_parin
489
490	USE wind_turbine_model_mod, &
491	ONLY: wtm_parin, &
492	wtm_check_parameters, &
493	wtm_init_arrays, &
494	wtm_init, &
495	wtm_actions, &
496	wtm_rrd_global, &
497	wtm_wrd_global
498
499	USE user, &
500	ONLY: user_module_enabled, &
501	user_parin, &
502	user_check_parameters, &
503	user_check_data_output_ts, &
504	user_check_data_output_pr, &
505	user_check_data_output, &
506	user_init, &
507	user_init_arrays, &
508	user_header, &
509	user_actions, &
510	user_3d_data_averaging, &
511	user_data_output_2d, &
512	user_data_output_3d, &
513	user_statistics, &
514	user_rrd_global, &
515	user_rrd_local, &
516	user_wrd_global, &
517	user_wrd_local, &
518	user_last_actions
519
520	IMPLICIT NONE
521
522	PRIVATE
523
524	!
525	!-- Public functions
526	PUBLIC &
527	module_interface_parin, &
528	module_interface_check_parameters, &
529	module_interface_check_data_output_ts, &
530	module_interface_check_data_output_pr, &
531	module_interface_check_data_output, &
532	module_interface_init_masks, &
533	module_interface_define_netcdf_grid, &
534	module_interface_init_arrays, &
535	module_interface_init, &
536	module_interface_init_checks, &
537	module_interface_header, &
538	module_interface_actions, &
539	module_interface_non_advective_processes, &
540	module_interface_exchange_horiz, &
541	module_interface_prognostic_equations, &
542	module_interface_boundary_conditions, &
543	module_interface_swap_timelevel, &
544	module_interface_3d_data_averaging, &
545	module_interface_data_output_2d, &
546	module_interface_data_output_3d, &
547	module_interface_statistics, &
548	module_interface_rrd_global, &
549	module_interface_wrd_global, &
550	module_interface_rrd_local, &
551	module_interface_wrd_local, &
552	module_interface_last_actions
553
554
555	INTERFACE module_interface_parin
556	MODULE PROCEDURE module_interface_parin
557	END INTERFACE module_interface_parin
558
559	INTERFACE module_interface_check_parameters
560	MODULE PROCEDURE module_interface_check_parameters
561	END INTERFACE module_interface_check_parameters
562
563	INTERFACE module_interface_check_data_output_ts
564	MODULE PROCEDURE module_interface_check_data_output_ts
565	END INTERFACE module_interface_check_data_output_ts
566
567	INTERFACE module_interface_check_data_output_pr
568	MODULE PROCEDURE module_interface_check_data_output_pr
569	END INTERFACE module_interface_check_data_output_pr
570
571	INTERFACE module_interface_check_data_output
572	MODULE PROCEDURE module_interface_check_data_output
573	END INTERFACE module_interface_check_data_output
574
575	INTERFACE module_interface_init_masks
576	MODULE PROCEDURE module_interface_init_masks
577	END INTERFACE module_interface_init_masks
578
579	INTERFACE module_interface_define_netcdf_grid
580	MODULE PROCEDURE module_interface_define_netcdf_grid
581	END INTERFACE module_interface_define_netcdf_grid
582
583	INTERFACE module_interface_init_arrays
584	MODULE PROCEDURE module_interface_init_arrays
585	END INTERFACE module_interface_init_arrays
586
587	INTERFACE module_interface_init
588	MODULE PROCEDURE module_interface_init
589	END INTERFACE module_interface_init
590
591	INTERFACE module_interface_init_checks
592	MODULE PROCEDURE module_interface_init_checks
593	END INTERFACE module_interface_init_checks
594
595	INTERFACE module_interface_header
596	MODULE PROCEDURE module_interface_header
597	END INTERFACE module_interface_header
598
599	INTERFACE module_interface_actions
600	MODULE PROCEDURE module_interface_actions
601	MODULE PROCEDURE module_interface_actions_ij
602	END INTERFACE module_interface_actions
603
604	INTERFACE module_interface_non_advective_processes
605	MODULE PROCEDURE module_interface_non_advective_processes
606	MODULE PROCEDURE module_interface_non_advective_processes_ij
607	END INTERFACE module_interface_non_advective_processes
608
609	INTERFACE module_interface_exchange_horiz
610	MODULE PROCEDURE module_interface_exchange_horiz
611	END INTERFACE module_interface_exchange_horiz
612
613	INTERFACE module_interface_prognostic_equations
614	MODULE PROCEDURE module_interface_prognostic_equations
615	MODULE PROCEDURE module_interface_prognostic_equations_ij
616	END INTERFACE module_interface_prognostic_equations
617
618	INTERFACE module_interface_swap_timelevel
619	MODULE PROCEDURE module_interface_swap_timelevel
620	END INTERFACE module_interface_swap_timelevel
621
622	INTERFACE module_interface_boundary_conditions
623	MODULE PROCEDURE module_interface_boundary_conditions
624	END INTERFACE module_interface_boundary_conditions
625
626	INTERFACE module_interface_3d_data_averaging
627	MODULE PROCEDURE module_interface_3d_data_averaging
628	END INTERFACE module_interface_3d_data_averaging
629
630	INTERFACE module_interface_data_output_2d
631	MODULE PROCEDURE module_interface_data_output_2d
632	END INTERFACE module_interface_data_output_2d
633
634	INTERFACE module_interface_data_output_3d
635	MODULE PROCEDURE module_interface_data_output_3d
636	END INTERFACE module_interface_data_output_3d
637
638	INTERFACE module_interface_statistics
639	MODULE PROCEDURE module_interface_statistics
640	END INTERFACE module_interface_statistics
641
642	INTERFACE module_interface_rrd_global
643	MODULE PROCEDURE module_interface_rrd_global
644	END INTERFACE module_interface_rrd_global
645
646	INTERFACE module_interface_wrd_global
647	MODULE PROCEDURE module_interface_wrd_global
648	END INTERFACE module_interface_wrd_global
649
650	INTERFACE module_interface_rrd_local
651	MODULE PROCEDURE module_interface_rrd_local
652	END INTERFACE module_interface_rrd_local
653
654	INTERFACE module_interface_wrd_local
655	MODULE PROCEDURE module_interface_wrd_local
656	END INTERFACE module_interface_wrd_local
657
658	INTERFACE module_interface_last_actions
659	MODULE PROCEDURE module_interface_last_actions
660	END INTERFACE module_interface_last_actions
661
662
663	CONTAINS
664
665
666	!------------------------------------------------------------------------------!
667	! Description:
668	! ------------
669	!> Read module-specific parameter namelists
670	!------------------------------------------------------------------------------!
671	SUBROUTINE module_interface_parin
672
673
674	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
675
676	CALL dynamics_parin
677
678	CALL bio_parin
679	CALL bcm_parin
680	CALL chem_parin
681	CALL flight_parin ! ToDo: rename module to match filename
682	CALL gust_parin
683	CALL im_parin
684	CALL lpm_parin
685	CALL lsm_parin
686	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
687	CALL mas_parin
688	CALL nesting_offl_parin
689	CALL ocean_parin
690	CALL pcm_parin
691	CALL radiation_parin
692	CALL salsa_parin
693	CALL spectra_parin
694	CALL surface_data_output_parin
695	CALL stg_parin
696	CALL usm_parin
697	CALL vm_parin
698	CALL wtm_parin
699
700	CALL user_parin
701
702	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
703
704
705	END SUBROUTINE module_interface_parin
706
707
708	!------------------------------------------------------------------------------!
709	! Description:
710	! ------------
711	!> Perform module-specific initialization checks
712	!------------------------------------------------------------------------------!
713	SUBROUTINE module_interface_check_parameters
714
715
716	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
717
718	CALL dynamics_check_parameters
719	CALL tcm_check_parameters
720
721	IF ( bulk_cloud_model ) CALL bcm_check_parameters
722	IF ( air_chemistry ) CALL chem_check_parameters
723	IF ( gust_module_enabled ) CALL gust_check_parameters
724	IF ( indoor_model ) CALL im_check_parameters
725	IF ( particle_advection ) CALL lpm_check_parameters
726	IF ( land_surface ) CALL lsm_check_parameters
727	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
728	IF ( nesting_offline ) CALL nesting_offl_check_parameters
729	IF ( ocean_mode ) CALL ocean_check_parameters
730	IF ( plant_canopy ) CALL pcm_check_parameters
731	IF ( radiation ) CALL radiation_check_parameters
732	IF ( salsa ) CALL salsa_check_parameters
733	IF ( calculate_spectra ) CALL spectra_check_parameters
734	IF ( surface_output ) CALL surface_data_output_check_parameters
735	IF ( syn_turb_gen ) CALL stg_check_parameters
736	IF ( urban_surface ) CALL usm_check_parameters
737	IF ( virtual_measurement ) CALL vm_check_parameters
738	IF ( wind_turbine ) CALL wtm_check_parameters
739
740	IF ( user_module_enabled ) CALL user_check_parameters
741
742	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
743
744
745	END SUBROUTINE module_interface_check_parameters
746
747
748	!------------------------------------------------------------------------------!
749	! Description:
750	! ------------
751	!> Check module-specific data output of timeseries
752	!------------------------------------------------------------------------------!
753	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
754
755
756	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
757	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
758	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
759	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
760
761
762	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
763
764	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
765
766	IF ( radiation ) THEN
767	CALL radiation_check_data_output_ts( dots_max, dots_num )
768	ENDIF
769
770	IF ( user_module_enabled ) THEN
771	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
772	ENDIF
773
774	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
775
776
777	END SUBROUTINE module_interface_check_data_output_ts
778
779
780	!------------------------------------------------------------------------------!
781	! Description:
782	! ------------
783	!> Check module-specific data output of profiles
784	!------------------------------------------------------------------------------!
785	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
786	dopr_unit )
787
788
789	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
790	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
791	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
792	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
793
794
795	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
796
797	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
798
799	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
800	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
801	ENDIF
802
803	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
804	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
805	ENDIF
806
807	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
808	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
809	ENDIF
810
811	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
812	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
813	ENDIF
814
815	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
816	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
817	ENDIF
818
819	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
820	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
821	ENDIF
822
823	IF ( unit == 'illegal' .AND. radiation ) THEN
824	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
825	ENDIF
826
827	IF ( unit == 'illegal' .AND. salsa ) THEN
828	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
829	ENDIF
830
831	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
832	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
833	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
834	ENDIF
835
836	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
837
838
839	END SUBROUTINE module_interface_check_data_output_pr
840
841	!------------------------------------------------------------------------------!
842	! Description:
843	! ------------
844	!> Check module-specific 2D and 3D data output
845	!------------------------------------------------------------------------------!
846	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
847
848
849	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
850	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
851
852	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
853	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
854	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
855	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
856
857
858	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
859
860	CALL dynamics_check_data_output( variable, unit )
861
862	CALL tcm_check_data_output( variable, unit )
863
864	IF ( unit == 'illegal' .AND. biometeorology ) THEN
865	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
866	ENDIF
867
868	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
869	CALL bcm_check_data_output( variable, unit )
870	ENDIF
871
872	IF ( unit == 'illegal' .AND. air_chemistry &
873	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
874	CALL chem_check_data_output( variable, unit, i, ilen, k )
875	ENDIF
876
877	IF ( unit == 'illegal' ) THEN
878	CALL doq_check_data_output( variable, unit, i, ilen, k )
879	ENDIF
880
881	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
882	CALL gust_check_data_output( variable, unit )
883	ENDIF
884
885	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
886	CALL lsm_check_data_output( variable, unit, i, ilen, k )
887	ENDIF
888
889	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
890	CALL ocean_check_data_output( variable, unit )
891	ENDIF
892
893	IF ( unit == 'illegal' .AND. plant_canopy &
894	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
895	CALL pcm_check_data_output( variable, unit )
896	ENDIF
897
898	IF ( unit == 'illegal' .AND. radiation ) THEN
899	CALL radiation_check_data_output( variable, unit, i, ilen, k )
900	ENDIF
901
902	IF ( unit == 'illegal' .AND. salsa ) THEN
903	CALL salsa_check_data_output( variable, unit )
904	ENDIF
905
906	IF ( unit == 'illegal' .AND. indoor_model ) THEN
907	CALL im_check_data_output( variable, unit )
908	ENDIF
909
910	IF ( unit == 'illegal' .AND. urban_surface &
911	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
912	CALL usm_check_data_output( variable, unit )
913	ENDIF
914
915	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
916	unit = ''
917	CALL user_check_data_output( variable, unit )
918	ENDIF
919
920	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
921
922
923	END SUBROUTINE module_interface_check_data_output
924
925
926	!------------------------------------------------------------------------------!
927	!
928	! Description:
929	! ------------
930	!> Interface for init_masks. ToDo: get rid of these redundant calls!
931	!------------------------------------------------------------------------------!
932	SUBROUTINE module_interface_init_masks( variable, unit )
933
934
935	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
936	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
937
938
939	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
940
941	CALL dynamics_init_masks( variable, unit )
942
943	IF ( unit == 'illegal' .AND. air_chemistry &
944	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
945	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
946	ENDIF
947
948	IF ( unit == 'illegal' ) THEN
949	CALL doq_check_data_output( variable, unit )
950	ENDIF
951
952	IF ( unit == 'illegal' .AND. radiation ) THEN
953	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
954	ENDIF
955
956	IF ( unit == 'illegal' .AND. salsa ) THEN
957	CALL salsa_check_data_output( variable, unit )
958	ENDIF
959
960	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
961	unit = ''
962	CALL user_check_data_output( variable, unit )
963	ENDIF
964
965	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
966
967
968	END SUBROUTINE module_interface_init_masks
969
970
971	!------------------------------------------------------------------------------!
972	!
973	! Description:
974	! ------------
975	!> Define appropriate grid for module-specific netcdf output variables.
976	!------------------------------------------------------------------------------!
977	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
978	grid_x, grid_y, grid_z )
979
980
981	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
982	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
983	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
984	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
985	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
986
987
988	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
989	!
990	!-- As long as no action is done in this subroutine, initialize strings with
991	!-- intent(out) attribute, in order to avoid compiler warnings.
992	found = .FALSE.
993	grid_x = 'none'
994	grid_y = 'none'
995	grid_z = 'none'
996	!
997	!-- Use var to avoid compiler warning about unused variable
998	IF ( var == ' ' ) RETURN
999
1000	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
1001
1002
1003	END SUBROUTINE module_interface_define_netcdf_grid
1004
1005
1006	!------------------------------------------------------------------------------!
1007	! Description:
1008	! ------------
1009	!> Allocate module-specific arrays and pointers
1010	!------------------------------------------------------------------------------!
1011	SUBROUTINE module_interface_init_arrays
1012
1013
1014	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
1015
1016	CALL dynamics_init_arrays
1017	CALL tcm_init_arrays
1018
1019	IF ( bulk_cloud_model ) CALL bcm_init_arrays
1020	IF ( air_chemistry ) CALL chem_init_arrays
1021	IF ( gust_module_enabled ) CALL gust_init_arrays
1022	IF ( particle_advection ) CALL lpm_init_arrays
1023	IF ( land_surface ) CALL lsm_init_arrays
1024	IF ( ocean_mode ) CALL ocean_init_arrays
1025	IF ( salsa ) CALL salsa_init_arrays
1026	IF ( urban_surface ) CALL usm_init_arrays
1027	IF ( surface_output ) CALL surface_data_output_init_arrays
1028	IF ( wind_turbine ) CALL wtm_init_arrays
1029
1030	IF ( user_module_enabled ) CALL user_init_arrays
1031
1032	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1033
1034
1035	END SUBROUTINE module_interface_init_arrays
1036
1037
1038	!------------------------------------------------------------------------------!
1039	! Description:
1040	! ------------
1041	!> Perform module-specific initialization
1042	!------------------------------------------------------------------------------!
1043	SUBROUTINE module_interface_init
1044
1045
1046	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1047
1048	CALL dynamics_init
1049	CALL tcm_init
1050
1051	IF ( biometeorology ) CALL bio_init
1052	IF ( bulk_cloud_model ) CALL bcm_init
1053	IF ( air_chemistry ) CALL chem_init
1054	IF ( virtual_flight ) CALL flight_init
1055	IF ( gust_module_enabled ) CALL gust_init
1056	IF ( indoor_model ) CALL im_init
1057	IF ( particle_advection ) CALL lpm_init
1058	IF ( large_scale_forcing ) CALL lsf_init
1059	IF ( land_surface ) CALL lsm_init
1060	IF ( nudging ) CALL nudge_init
1061	IF ( ocean_mode ) CALL ocean_init
1062	IF ( plant_canopy ) CALL pcm_init
1063	IF ( salsa ) CALL salsa_init
1064	IF ( urban_surface ) CALL usm_init
1065	IF ( virtual_measurement ) CALL vm_init
1066	IF ( wind_turbine ) CALL wtm_init
1067	IF ( radiation ) CALL radiation_init
1068
1069	CALL doq_init
1070
1071	IF ( user_module_enabled ) CALL user_init
1072
1073	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1074
1075
1076	END SUBROUTINE module_interface_init
1077
1078
1079	!------------------------------------------------------------------------------!
1080	! Description:
1081	! ------------
1082	!> Perform module-specific post-initialization checks
1083	!------------------------------------------------------------------------------!
1084	SUBROUTINE module_interface_init_checks
1085
1086
1087	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1088
1089	CALL dynamics_init_checks
1090
1091	IF ( biometeorology ) CALL bio_init_checks
1092
1093	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1094
1095
1096	END SUBROUTINE module_interface_init_checks
1097
1098
1099	!------------------------------------------------------------------------------!
1100	! Description:
1101	! ------------
1102	!> Gather module-specific header output
1103	!------------------------------------------------------------------------------!
1104	SUBROUTINE module_interface_header( io )
1105
1106
1107	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1108
1109
1110	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1111
1112	CALL dynamics_header( io )
1113
1114	IF ( biometeorology ) CALL bio_header ( io )
1115	IF ( bulk_cloud_model ) CALL bcm_header( io )
1116	IF ( air_chemistry ) CALL chem_header ( io )
1117	IF ( virtual_flight ) CALL flight_header( io )
1118	IF ( gust_module_enabled ) CALL gust_header( io )
1119	IF ( particle_advection ) CALL lpm_header( io )
1120	IF ( land_surface ) CALL lsm_header( io )
1121	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1122	IF ( nesting_offline ) CALL nesting_offl_header( io )
1123	IF ( ocean_mode ) CALL ocean_header( io )
1124	IF ( plant_canopy ) CALL pcm_header( io )
1125	IF ( radiation ) CALL radiation_header( io )
1126	IF ( salsa ) CALL salsa_header( io )
1127	IF ( calculate_spectra ) CALL spectra_header( io )
1128	IF ( syn_turb_gen ) CALL stg_header( io )
1129
1130	IF ( user_module_enabled ) CALL user_header( io )
1131
1132	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1133
1134
1135	END SUBROUTINE module_interface_header
1136
1137
1138	!------------------------------------------------------------------------------!
1139	! Description:
1140	! ------------
1141	!> Perform module-specific actions while in time-integration (vector-optimized)
1142	!------------------------------------------------------------------------------!
1143	SUBROUTINE module_interface_actions( location )
1144
1145
1146	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1147
1148	CALL dynamics_actions( location )
1149	CALL tcm_actions( location )
1150
1151	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1152	IF ( air_chemistry ) CALL chem_actions( location )
1153	IF ( gust_module_enabled ) CALL gust_actions( location )
1154	IF ( particle_advection ) CALL lpm_actions( location )
1155	IF ( ocean_mode ) CALL ocean_actions( location )
1156	IF ( salsa ) CALL salsa_actions( location )
1157	IF ( wind_turbine ) CALL wtm_actions( location )
1158
1159	IF ( user_module_enabled ) CALL user_actions( location )
1160	IF ( vdi_checks ) CALL vdi_actions( location )
1161
1162
1163	END SUBROUTINE module_interface_actions
1164
1165
1166	!------------------------------------------------------------------------------!
1167	! Description:
1168	! ------------
1169	!> Perform module-specific actions while in time-integration (cache-optimized)
1170	!------------------------------------------------------------------------------!
1171	SUBROUTINE module_interface_actions_ij( i, j, location )
1172
1173
1174	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1175	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1176	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1177
1178	CALL dynamics_actions( i, j, location )
1179	CALL tcm_actions( i, j, location )
1180
1181	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1182	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1183	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1184	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1185	IF ( salsa ) CALL salsa_actions( i, j, location )
1186	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1187
1188	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1189
1190
1191	END SUBROUTINE module_interface_actions_ij
1192
1193
1194	!------------------------------------------------------------------------------!
1195	! Description:
1196	! ------------
1197	!> Compute module-specific non_advective_processes (vector-optimized)
1198	!------------------------------------------------------------------------------!
1199	SUBROUTINE module_interface_non_advective_processes
1200
1201
1202	CALL dynamics_non_advective_processes
1203
1204	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1205	IF ( air_chemistry ) CALL chem_non_advective_processes
1206	IF ( salsa ) CALL salsa_non_advective_processes
1207
1208
1209	END SUBROUTINE module_interface_non_advective_processes
1210
1211
1212	!------------------------------------------------------------------------------!
1213	! Description:
1214	! ------------
1215	!> Compute module-specific non_advective_processes (cache-optimized)
1216	!------------------------------------------------------------------------------!
1217	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1218
1219
1220	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1221	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1222
1223	CALL dynamics_non_advective_processes( i, j )
1224
1225	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1226	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1227	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1228
1229
1230	END SUBROUTINE module_interface_non_advective_processes_ij
1231
1232	!------------------------------------------------------------------------------!
1233	! Description:
1234	! ------------
1235	!> Exchange horiz for module-specific quantities
1236	!------------------------------------------------------------------------------!
1237	SUBROUTINE module_interface_exchange_horiz
1238
1239
1240	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1241
1242	CALL dynamics_exchange_horiz
1243
1244	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1245	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1246	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1247
1248	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1249
1250
1251	END SUBROUTINE module_interface_exchange_horiz
1252
1253
1254	!------------------------------------------------------------------------------!
1255	! Description:
1256	! ------------
1257	!> Compute module-specific prognostic_equations (vector-optimized)
1258	!------------------------------------------------------------------------------!
1259	SUBROUTINE module_interface_prognostic_equations
1260
1261
1262	CALL dynamics_prognostic_equations
1263	CALL tcm_prognostic_equations
1264
1265	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1266	IF ( air_chemistry ) CALL chem_prognostic_equations
1267	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1268	IF ( ocean_mode ) CALL ocean_prognostic_equations
1269	IF ( salsa ) CALL salsa_prognostic_equations
1270
1271
1272	END SUBROUTINE module_interface_prognostic_equations
1273
1274
1275	!------------------------------------------------------------------------------!
1276	! Description:
1277	! ------------
1278	!> Compute module-specific prognostic_equations (cache-optimized)
1279	!------------------------------------------------------------------------------!
1280	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1281
1282
1283	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1284	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1285	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1286	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1287
1288	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1289	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1290
1291	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1292	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1293	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1294	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1295	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1296
1297
1298	END SUBROUTINE module_interface_prognostic_equations_ij
1299
1300	!------------------------------------------------------------------------------!
1301	! Description:
1302	! ------------
1303	!> Compute module-specific boundary conditions
1304	!------------------------------------------------------------------------------!
1305	SUBROUTINE module_interface_boundary_conditions
1306
1307
1308	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
1309
1310	CALL dynamics_boundary_conditions
1311	CALL tcm_boundary_conds
1312
1313	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
1314	IF ( air_chemistry ) CALL chem_boundary_conditions
1315	IF ( ocean_mode ) CALL ocean_boundary_conditions
1316	IF ( salsa ) CALL salsa_boundary_conditions
1317
1318	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
1319
1320
1321	END SUBROUTINE module_interface_boundary_conditions
1322
1323	!------------------------------------------------------------------------------!
1324	! Description:
1325	! ------------
1326	!> Swap the timelevel pointers for module-specific arrays
1327	!------------------------------------------------------------------------------!
1328	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1329
1330
1331	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1332
1333
1334	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1335
1336	CALL dynamics_swap_timelevel( swap_mode )
1337	CALL tcm_swap_timelevel( swap_mode )
1338
1339	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1340	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1341	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1342	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1343	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1344	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1345	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1346
1347	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1348
1349
1350	END SUBROUTINE module_interface_swap_timelevel
1351
1352
1353	!------------------------------------------------------------------------------!
1354	!
1355	! Description:
1356	! ------------
1357	!> Perform module-specific averaging of 3D data
1358	!------------------------------------------------------------------------------!
1359	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1360
1361
1362	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1363	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1364
1365
1366	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1367
1368	CALL dynamics_3d_data_averaging( mode, variable )
1369	CALL tcm_3d_data_averaging( mode, variable )
1370
1371	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1372	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1373	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1374	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1375	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1376	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1377	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1378	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1379	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1380	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1381	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1382
1383	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1384
1385	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1386
1387
1388	END SUBROUTINE module_interface_3d_data_averaging
1389
1390	!------------------------------------------------------------------------------!
1391	!
1392	! Description:
1393	! ------------
1394	!> Define module-specific 2D output variables
1395	!------------------------------------------------------------------------------!
1396	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1397	local_pf, two_d, nzb_do, nzt_do, &
1398	fill_value )
1399
1400	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1401	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1402	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1403	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1404	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1405	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1406	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1407	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1408	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1409
1410	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1411
1412
1413	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1414
1415	CALL dynamics_data_output_2d( &
1416	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1417	)
1418
1419	IF ( .NOT. found ) THEN
1420	CALL tcm_data_output_2d( &
1421	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1422	)
1423	ENDIF
1424
1425	IF ( .NOT. found .AND. biometeorology ) THEN
1426	CALL bio_data_output_2d( &
1427	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1428	)
1429	ENDIF
1430
1431	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1432	CALL bcm_data_output_2d( &
1433	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1434	)
1435	ENDIF
1436
1437	IF ( .NOT. found .AND. air_chemistry ) THEN
1438	CALL chem_data_output_2d( &
1439	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1440	)
1441	ENDIF
1442
1443	IF ( .NOT. found ) THEN
1444	CALL doq_output_2d( &
1445	av, variable, found, grid, mode, local_pf, two_d, &
1446	nzb_do, nzt_do, fill_value )
1447	ENDIF
1448
1449	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1450	CALL gust_data_output_2d( &
1451	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1452	)
1453	ENDIF
1454
1455	IF ( .NOT. found .AND. land_surface ) THEN
1456	CALL lsm_data_output_2d( &
1457	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1458	)
1459	ENDIF
1460
1461	IF ( .NOT. found .AND. ocean_mode ) THEN
1462	CALL ocean_data_output_2d( &
1463	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1464	)
1465	ENDIF
1466
1467	IF ( .NOT. found .AND. radiation ) THEN
1468	CALL radiation_data_output_2d( &
1469	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1470	)
1471	ENDIF
1472
1473	IF ( .NOT. found .AND. salsa ) THEN
1474	CALL salsa_data_output_2d( &
1475	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1476	)
1477	ENDIF
1478
1479	IF ( .NOT. found .AND. user_module_enabled ) THEN
1480	CALL user_data_output_2d( &
1481	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1482	)
1483	ENDIF
1484
1485	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1486
1487
1488	END SUBROUTINE module_interface_data_output_2d
1489
1490
1491	!------------------------------------------------------------------------------!
1492	!
1493	! Description:
1494	! ------------
1495	!> Define module-specific 3D output variables
1496	!------------------------------------------------------------------------------!
1497	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1498	fill_value, resorted, nzb_do, nzt_do )
1499
1500
1501	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1502	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1503	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1504	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1505	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1506	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1507	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1508
1509	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1510
1511
1512	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1513
1514	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1515	resorted = .FALSE.
1516
1517	IF ( .NOT. found ) THEN
1518	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1519	resorted = .TRUE.
1520	ENDIF
1521
1522	IF ( .NOT. found .AND. biometeorology ) THEN
1523	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1524	resorted = .FALSE.
1525	ENDIF
1526
1527	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1528	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1529	resorted = .TRUE.
1530	ENDIF
1531
1532	IF ( .NOT. found .AND. air_chemistry ) THEN
1533	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1534	resorted = .TRUE.
1535	ENDIF
1536
1537	IF ( .NOT. found ) THEN
1538	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1539	resorted = .TRUE.
1540	ENDIF
1541
1542	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1543	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1544	resorted = .TRUE.
1545	ENDIF
1546
1547	IF ( .NOT. found .AND. indoor_model ) THEN
1548	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1549	resorted = .TRUE.
1550	ENDIF
1551
1552	IF ( .NOT. found .AND. ocean_mode ) THEN
1553	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1554	resorted = .TRUE.
1555	ENDIF
1556
1557	IF ( .NOT. found .AND. plant_canopy ) THEN
1558	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1559	resorted = .TRUE.
1560	ENDIF
1561
1562	IF ( .NOT. found .AND. radiation ) THEN
1563	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1564	resorted = .TRUE.
1565	ENDIF
1566
1567	IF ( .NOT. found .AND. salsa ) THEN
1568	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1569	resorted = .TRUE.
1570	ENDIF
1571
1572	IF ( .NOT. found .AND. user_module_enabled ) THEN
1573	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1574	resorted = .TRUE.
1575	ENDIF
1576
1577	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1578
1579
1580	END SUBROUTINE module_interface_data_output_3d
1581
1582
1583	!------------------------------------------------------------------------------!
1584	! Description:
1585	! ------------
1586	!> Compute module-specific profile and timeseries data
1587	!------------------------------------------------------------------------------!
1588	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1589
1590
1591	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1592	INTEGER(iwp), INTENT(IN) :: sr !<
1593	INTEGER(iwp), INTENT(IN) :: tn !<
1594	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1595
1596
1597	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1598
1599	CALL dynamics_statistics( mode, sr, tn )
1600
1601	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1602	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1603	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1604
1605	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1606
1607	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1608
1609
1610	END SUBROUTINE module_interface_statistics
1611
1612
1613	!------------------------------------------------------------------------------!
1614	! Description:
1615	! ------------
1616	!> Read module-specific restart data globaly shared by all MPI ranks
1617	!------------------------------------------------------------------------------!
1618	SUBROUTINE module_interface_rrd_global( found )
1619
1620
1621	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1622
1623
1624	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1625
1626	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1627
1628	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1629	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1630	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1631	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1632	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1633	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1634	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1635	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1636	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1637
1638	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1639
1640	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1641
1642
1643	END SUBROUTINE module_interface_rrd_global
1644
1645
1646	!------------------------------------------------------------------------------!
1647	! Description:
1648	! ------------
1649	!> Write module-specific restart data globaly shared by all MPI ranks
1650	!------------------------------------------------------------------------------!
1651	SUBROUTINE module_interface_wrd_global
1652
1653
1654	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1655
1656	CALL dynamics_wrd_global
1657
1658	IF ( biometeorology ) CALL bio_wrd_global
1659	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1660	IF ( virtual_flight ) CALL flight_wrd_global
1661	IF ( gust_module_enabled ) CALL gust_wrd_global
1662	IF ( ocean_mode ) CALL ocean_wrd_global
1663	IF ( syn_turb_gen ) CALL stg_wrd_global
1664	IF ( wind_turbine ) CALL wtm_wrd_global
1665	IF ( surface_output ) CALL surface_data_output_wrd_global
1666
1667	IF ( user_module_enabled ) CALL user_wrd_global
1668
1669	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1670
1671
1672	END SUBROUTINE module_interface_wrd_global
1673
1674
1675	!------------------------------------------------------------------------------!
1676	! Description:
1677	! ------------
1678	!> Read module-specific restart data specific to local MPI ranks
1679	!------------------------------------------------------------------------------!
1680	SUBROUTINE module_interface_rrd_local( map_index, &
1681	nxlf, nxlc, nxl_on_file, &
1682	nxrf, nxrc, nxr_on_file, &
1683	nynf, nync, nyn_on_file, &
1684	nysf, nysc, nys_on_file, &
1685	tmp_2d, tmp_3d, found )
1686
1687
1688	INTEGER(iwp), INTENT(IN) :: map_index !<
1689	INTEGER(iwp), INTENT(IN) :: nxlc !<
1690	INTEGER(iwp), INTENT(IN) :: nxlf !<
1691	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1692	INTEGER(iwp), INTENT(IN) :: nxrc !<
1693	INTEGER(iwp), INTENT(IN) :: nxrf !<
1694	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1695	INTEGER(iwp), INTENT(IN) :: nync !<
1696	INTEGER(iwp), INTENT(IN) :: nynf !<
1697	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1698	INTEGER(iwp), INTENT(IN) :: nysc !<
1699	INTEGER(iwp), INTENT(IN) :: nysf !<
1700	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1701	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1702
1703	REAL(wp), &
1704	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1705	INTENT(OUT) :: tmp_2d !<
1706	REAL(wp), &
1707	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1708	INTENT(OUT) :: tmp_3d !<
1709
1710
1711	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1712
1713	CALL dynamics_rrd_local( &
1714	map_index, &
1715	nxlf, nxlc, nxl_on_file, &
1716	nxrf, nxrc, nxr_on_file, &
1717	nynf, nync, nyn_on_file, &
1718	nysf, nysc, nys_on_file, &
1719	tmp_2d, tmp_3d, found &
1720	) ! ToDo: change interface to pass variable
1721
1722	IF ( .NOT. found ) CALL bio_rrd_local( &
1723	found &
1724	)
1725
1726	IF ( .NOT. found ) CALL bcm_rrd_local( &
1727	map_index, &
1728	nxlf, nxlc, nxl_on_file, &
1729	nxrf, nxrc, nxr_on_file, &
1730	nynf, nync, nyn_on_file, &
1731	nysf, nysc, nys_on_file, &
1732	tmp_2d, tmp_3d, found &
1733	) ! ToDo: change interface to pass variable
1734
1735	IF ( .NOT. found ) CALL chem_rrd_local( &
1736	map_index, &
1737	nxlf, nxlc, nxl_on_file, &
1738	nxrf, nxrc, nxr_on_file, &
1739	nynf, nync, nyn_on_file, &
1740	nysf, nysc, nys_on_file, &
1741	tmp_3d, found &
1742	) ! ToDo: change interface to pass variable
1743
1744	! IF ( .NOT. found ) CALL doq_rrd_local( &
1745	! map_index, &
1746	! nxlf, nxlc, nxl_on_file, &
1747	! nxrf, nxrc, nxr_on_file, &
1748	! nynf, nync, nyn_on_file, &
1749	! nysf, nysc, nys_on_file, &
1750	! tmp_3d_non_standard, found &
1751	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1752
1753	IF ( .NOT. found ) CALL gust_rrd_local( &
1754	map_index, &
1755	nxlf, nxlc, nxl_on_file, &
1756	nxrf, nxrc, nxr_on_file, &
1757	nynf, nync, nyn_on_file, &
1758	nysf, nysc, nys_on_file, &
1759	tmp_2d, tmp_3d, found &
1760	) ! ToDo: change interface to pass variable
1761
1762	IF ( .NOT. found ) CALL lpm_rrd_local( &
1763	map_index, &
1764	nxlf, nxlc, nxl_on_file, &
1765	nxrf, nxrc, nxr_on_file, &
1766	nynf, nync, nyn_on_file, &
1767	nysf, nysc, nys_on_file, &
1768	tmp_3d, found &
1769	) ! ToDo: change interface to pass variable
1770
1771	IF ( .NOT. found ) CALL lsm_rrd_local( &
1772	map_index, &
1773	nxlf, nxlc, nxl_on_file, &
1774	nxrf, nxrc, nxr_on_file, &
1775	nynf, nync, nyn_on_file, &
1776	nysf, nysc, nys_on_file, &
1777	tmp_2d, found &
1778	) ! ToDo: change interface to pass variable
1779
1780	IF ( .NOT. found ) CALL ocean_rrd_local( &
1781	map_index, &
1782	nxlf, nxlc, nxl_on_file, &
1783	nxrf, nxrc, nxr_on_file, &
1784	nynf, nync, nyn_on_file, &
1785	nysf, nysc, nys_on_file, &
1786	tmp_3d, found &
1787	) ! ToDo: change interface to pass variable
1788
1789	IF ( .NOT. found ) CALL radiation_rrd_local( &
1790	map_index, &
1791	nxlf, nxlc, nxl_on_file, &
1792	nxrf, nxrc, nxr_on_file, &
1793	nynf, nync, nyn_on_file, &
1794	nysf, nysc, nys_on_file, &
1795	tmp_2d, tmp_3d, found &
1796	) ! ToDo: change interface to pass variable
1797
1798	IF ( .NOT. found ) CALL salsa_rrd_local( &
1799	map_index, &
1800	nxlf, nxlc, nxl_on_file, &
1801	nxrf, nxrc, nxr_on_file, &
1802	nynf, nync, nyn_on_file, &
1803	nysf, nysc, nys_on_file, &
1804	tmp_3d, found &
1805	) ! ToDo: change interface to pass variable
1806
1807	IF ( .NOT. found ) CALL usm_rrd_local( &
1808	map_index, &
1809	nxlf, nxlc, nxl_on_file, &
1810	nxrf, nxr_on_file, &
1811	nynf, nyn_on_file, &
1812	nysf, nysc, nys_on_file, &
1813	found &
1814	) ! ToDo: change interface to pass variable
1815	!
1816	!-- Surface data do not need overlap data, so do not pass these information.
1817	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1818
1819	IF ( .NOT. found ) CALL user_rrd_local( &
1820	map_index, &
1821	nxlf, nxlc, nxl_on_file, &
1822	nxrf, nxrc, nxr_on_file, &
1823	nynf, nync, nyn_on_file, &
1824	nysf, nysc, nys_on_file, &
1825	tmp_3d, found &
1826	) ! ToDo: change interface to pass variable
1827
1828	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1829
1830
1831	END SUBROUTINE module_interface_rrd_local
1832
1833
1834	!------------------------------------------------------------------------------!
1835	! Description:
1836	! ------------
1837	!> Write module-specific restart data specific to local MPI ranks
1838	!------------------------------------------------------------------------------!
1839	SUBROUTINE module_interface_wrd_local
1840
1841
1842	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1843
1844	CALL dynamics_wrd_local
1845
1846	IF ( biometeorology ) CALL bio_wrd_local
1847	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1848	IF ( air_chemistry ) CALL chem_wrd_local
1849	CALL doq_wrd_local
1850	IF ( gust_module_enabled ) CALL gust_wrd_local
1851	IF ( particle_advection ) CALL lpm_wrd_local
1852	IF ( land_surface ) CALL lsm_wrd_local
1853	IF ( ocean_mode ) CALL ocean_wrd_local
1854	IF ( radiation ) CALL radiation_wrd_local
1855	IF ( salsa ) CALL salsa_wrd_local
1856	IF ( urban_surface ) CALL usm_wrd_local
1857	IF ( surface_output ) CALL surface_data_output_wrd_local
1858
1859	IF ( user_module_enabled ) CALL user_wrd_local
1860
1861	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1862
1863
1864	END SUBROUTINE module_interface_wrd_local
1865
1866
1867	!------------------------------------------------------------------------------!
1868	! Description:
1869	! ------------
1870	!> Perform module-specific last actions before the program terminates
1871	!------------------------------------------------------------------------------!
1872	SUBROUTINE module_interface_last_actions
1873
1874
1875	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1876
1877	CALL dynamics_last_actions
1878
1879	IF ( virtual_measurement ) CALL vm_last_actions
1880
1881	IF ( user_module_enabled ) CALL user_last_actions
1882
1883	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1884
1885
1886	END SUBROUTINE module_interface_last_actions
1887
1888
1889	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |