Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4015

Last change on this file since 4015 was 4008, checked in by moh.hefny, 5 years ago
Bugfix in check radiation related variables
Property svn:keywords set to `Id`
File size: 73.0 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4008 2019-05-30 09:50:11Z raasch $
27	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
28	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
29	! are not defined everywhere, e.g. land-surface outputs, this will be
30	! problematic as NaN will be output.
31	!
32	! 3987 2019-05-22 09:52:13Z kanani
33	! Introduce switchable DEBUG file output via debug_message routine
34	!
35	! 3956 2019-05-07 12:32:52Z monakurppa
36	! - Added calls for salsa_non_advective_processes and
37	! salsa_exchange_horiz_bounds
38	! - Moved the call for salsa_data_output_2d/3d before that of
39	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
40	! salsa output variable and encounters a segmentation fault for "Ntot" due
41	! to the shortoutput name
42	!
43	! 3931 2019-04-24 16:34:28Z schwenkel
44	! Changed non_transport_physics to non_advective_processes
45	!
46	! 3930 2019-04-24 14:57:18Z forkel
47	! Correct/complete module_interface introduction for chemistry model
48	!
49	! 3887 2019 -04-12 08:47:41Z schwenkel
50	! Changes related to global restructuring of location messages and introduction
51	! of additional debug messages
52	!
53	! 3880 2019 -04-08 21:43:02Z knoop
54	! Add a call for salsa_prognostic_equations
55	!
56	! 3840 2019-03-29 10:35:52Z knoop
57	! bugfix: intent of dummy arguments changed to inout
58	!
59	! 3770 2019-02-28 11:22:32Z moh.hefny
60	! removed unused variables in module_interface_check_data_output_ts
61	!
62	! 3767 08:18:02Z raasch
63	! unused variable file_index removed from subroutine parameter list
64	!
65	! 3766 2019-02-26 16:23:41Z raasch
66	! first argument removed from module_interface_rrd_*, statement added to avoid
67	! compiler warning about unused variable, file reformatted with respect to coding
68	! standards
69	!
70	! 3762 2019-02-25 16:54:16Z suehring
71	! only pass required arguments to surface_data_output_rrd_local
72	!
73	! 3747 2019-02-16 15:15:23Z gronemeier
74	! Call user_init_arrays
75	!
76	! 3745 2019-02-15 18:57:56Z suehring
77	! Add indoor model
78	!
79	! 3744 2019-02-15 18:38:58Z suehring
80	! Removed bio_check_parameters as the method is empty.
81	!
82	! 3735 2019-02-12 09:52:40Z dom_dwd_user
83	! Accepting variable j from check_parameters and passing it to
84	! bio_check_data_output
85	! Add required restart data for surface output module
86	!
87	! 3731 2019-02-11 13:06:27Z suehring
88	! Add check_parameters routine for virtual measurements
89	!
90	! 3711 2019-01-31 13:44:26Z knoop
91	! Introduced module_interface_init_checks for post-init checks
92	!
93	! 3705 2019-01-29 19:56:39Z suehring
94	! Add last_actions for virtual measurements
95	!
96	! 3704 2019-01-29 19:51:41Z suehring
97	! Some interface calls moved to module_interface + cleanup
98	!
99	! 3684 2019-01-20 20:20:58Z knoop
100	! Bugfix: made unit intend INOUT
101	!
102	! 3650 2019-01-04 13:01:33Z kanani
103	! Add restart routines for biometeorology
104	!
105	! 3649 2019-01-02 16:52:21Z suehring
106	! Initialize strings, in order to avoid compiler warnings for non-initialized
107	! characters with intent(out) attribute
108	!
109	! 3648 2019-01-02 16:35:46Z suehring
110	! Rename subroutines for surface-data output
111	!
112	! 3641 2018-12-23 22:10:01Z knoop
113	! Initial implementation of the PALM module interface
114	!
115	!
116	! Description:
117	! ------------
118	!> This is the interface between the PALM model core and all its modules.
119	!>
120	!> @todo Re-format module to be consistent with coding standard
121	!------------------------------------------------------------------------------!
122	MODULE module_interface
123
124	USE indices, &
125	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
126
127	USE kinds
128
129	!
130	!-- load module-specific control parameters.
131	!-- ToDo: move all of them to respective module or a dedicated central module
132	USE control_parameters, &
133	ONLY: air_chemistry, &
134	biometeorology, &
135	debug_output, &
136	debug_output_timestep, &
137	indoor_model, &
138	land_surface, &
139	large_scale_forcing, &
140	nesting_offline, &
141	nudging, &
142	ocean_mode, &
143	plant_canopy, &
144	salsa, &
145	surface_output, &
146	syn_turb_gen, &
147	urban_surface, &
148	virtual_flight, &
149	virtual_measurement, &
150	wind_turbine
151
152	!
153	!-- load interface routines of all PALM modules
154	USE biometeorology_mod, &
155	ONLY: bio_parin, &
156	bio_check_data_output, &
157	bio_init, &
158	bio_init_checks, &
159	bio_header, &
160	bio_3d_data_averaging, &
161	bio_data_output_2d, &
162	bio_data_output_3d, &
163	bio_rrd_global, &
164	bio_rrd_local, &
165	bio_wrd_global, &
166	bio_wrd_local
167
168	USE bulk_cloud_model_mod, &
169	ONLY: bulk_cloud_model, &
170	bcm_parin, &
171	bcm_check_parameters, &
172	bcm_check_data_output_pr, &
173	bcm_check_data_output, &
174	bcm_init_arrays, &
175	bcm_init, &
176	bcm_header, &
177	bcm_actions, &
178	bcm_non_advective_processes, &
179	bcm_exchange_horiz, &
180	bcm_prognostic_equations, &
181	bcm_swap_timelevel, &
182	bcm_3d_data_averaging, &
183	bcm_data_output_2d, &
184	bcm_data_output_3d, &
185	bcm_rrd_global, &
186	bcm_wrd_global, &
187	bcm_rrd_local, &
188	bcm_wrd_local
189
190	USE chemistry_model_mod, &
191	ONLY: chem_parin, &
192	chem_check_parameters, &
193	chem_check_data_output_pr, &
194	chem_check_data_output, &
195	chem_exchange_horiz_bounds, &
196	chem_init_arrays, &
197	chem_init, &
198	chem_header, &
199	chem_actions, &
200	chem_non_advective_processes, &
201	chem_prognostic_equations, &
202	chem_swap_timelevel, &
203	chem_3d_data_averaging, &
204	chem_data_output_2d, &
205	chem_data_output_3d, &
206	chem_statistics, &
207	chem_rrd_local, &
208	chem_wrd_local
209
210	USE flight_mod, &
211	ONLY: flight_parin, &
212	flight_header, &
213	flight_init, &
214	flight_rrd_global, &
215	flight_wrd_global
216
217	USE gust_mod, &
218	ONLY: gust_module_enabled, &
219	gust_parin, &
220	gust_check_parameters, &
221	gust_check_data_output_pr, &
222	gust_check_data_output, &
223	gust_init_arrays, &
224	gust_init, &
225	gust_header, &
226	gust_actions, &
227	gust_prognostic_equations, &
228	gust_swap_timelevel, &
229	gust_3d_data_averaging, &
230	gust_data_output_2d, &
231	gust_data_output_3d, &
232	gust_statistics, &
233	gust_rrd_global, &
234	gust_wrd_global, &
235	gust_rrd_local, &
236	gust_wrd_local
237
238	USE indoor_model_mod, &
239	ONLY: im_parin, &
240	im_check_data_output, &
241	im_check_parameters, &
242	im_data_output_3d, &
243	im_init
244
245	USE land_surface_model_mod, &
246	ONLY: lsm_parin, &
247	lsm_check_parameters, &
248	lsm_check_data_output_pr, &
249	lsm_check_data_output, &
250	lsm_init_arrays, &
251	lsm_init, &
252	lsm_header, &
253	lsm_swap_timelevel, &
254	lsm_3d_data_averaging, &
255	lsm_data_output_2d, &
256	lsm_rrd_local, &
257	lsm_wrd_local
258
259	USE lsf_nudging_mod, &
260	ONLY: lsf_nudging_check_parameters, &
261	lsf_nudging_check_data_output_pr, &
262	lsf_init, &
263	nudge_init, &
264	lsf_nudging_header
265
266	USE multi_agent_system_mod, &
267	ONLY: mas_parin
268
269	USE nesting_offl_mod, &
270	ONLY: nesting_offl_parin, &
271	nesting_offl_check_parameters, &
272	nesting_offl_header
273
274	USE ocean_mod, &
275	ONLY: ocean_parin, &
276	ocean_check_parameters, &
277	ocean_check_data_output_pr, &
278	ocean_check_data_output, &
279	ocean_init_arrays, &
280	ocean_init, &
281	ocean_header, &
282	ocean_actions, &
283	ocean_prognostic_equations, &
284	ocean_swap_timelevel, &
285	ocean_3d_data_averaging, &
286	ocean_data_output_2d, &
287	ocean_data_output_3d, &
288	ocean_rrd_global, &
289	ocean_wrd_global, &
290	ocean_rrd_local, &
291	ocean_wrd_local
292
293	USE plant_canopy_model_mod, &
294	ONLY: pcm_parin, &
295	pcm_check_parameters, &
296	pcm_check_data_output, &
297	pcm_init, &
298	pcm_header, &
299	pcm_data_output_3d
300
301	USE radiation_model_mod, &
302	ONLY: radiation, &
303	radiation_parin, &
304	radiation_check_parameters, &
305	radiation_check_data_output_ts, &
306	radiation_check_data_output_pr, &
307	radiation_check_data_output, &
308	radiation_init, &
309	radiation_header, &
310	radiation_3d_data_averaging, &
311	radiation_data_output_2d, &
312	radiation_data_output_3d, &
313	radiation_rrd_local, &
314	radiation_wrd_local
315
316	USE salsa_mod, &
317	ONLY: salsa_parin, &
318	salsa_check_parameters, &
319	salsa_check_data_output, &
320	salsa_init_arrays, &
321	salsa_init, &
322	salsa_header, &
323	salsa_actions, &
324	salsa_non_advective_processes, &
325	salsa_exchange_horiz_bounds, &
326	salsa_prognostic_equations, &
327	salsa_swap_timelevel, &
328	salsa_3d_data_averaging, &
329	salsa_data_output_2d, &
330	salsa_data_output_3d, &
331	salsa_rrd_local, &
332	salsa_wrd_local
333
334	USE spectra_mod, &
335	ONLY: calculate_spectra, &
336	spectra_parin, &
337	spectra_check_parameters, &
338	spectra_header
339
340	USE surface_data_output_mod, &
341	ONLY: surface_data_output_parin, &
342	surface_data_output_check_parameters, &
343	surface_data_output_init_arrays, &
344	surface_data_output_rrd_local, &
345	surface_data_output_rrd_global, &
346	surface_data_output_wrd_local, &
347	surface_data_output_wrd_global
348
349	USE synthetic_turbulence_generator_mod, &
350	ONLY: stg_parin, &
351	stg_check_parameters, &
352	stg_header, &
353	stg_rrd_global, &
354	stg_wrd_global
355
356	USE urban_surface_mod, &
357	ONLY: usm_parin, &
358	usm_check_parameters, &
359	usm_check_data_output, &
360	usm_init_arrays, &
361	usm_init, &
362	usm_swap_timelevel, &
363	usm_3d_data_averaging, &
364	usm_rrd_local, &
365	usm_wrd_local
366
367	USE user, &
368	ONLY: user_module_enabled, &
369	user_parin, &
370	user_check_parameters, &
371	user_check_data_output_ts, &
372	user_check_data_output_pr, &
373	user_check_data_output, &
374	user_init, &
375	user_init_arrays, &
376	user_header, &
377	user_actions, &
378	user_3d_data_averaging, &
379	user_data_output_2d, &
380	user_data_output_3d, &
381	user_statistics, &
382	user_rrd_global, &
383	user_rrd_local, &
384	user_wrd_global, &
385	user_wrd_local, &
386	user_last_actions
387
388	USE virtual_measurement_mod, &
389	ONLY: vm_check_parameters, &
390	vm_init, &
391	vm_last_actions, &
392	vm_parin
393
394	USE wind_turbine_model_mod, &
395	ONLY: wtm_parin, &
396	wtm_check_parameters, &
397	wtm_init_arrays, &
398	wtm_init, &
399	wtm_actions, &
400	wtm_rrd_global, &
401	wtm_wrd_global
402
403	IMPLICIT NONE
404
405	PRIVATE
406
407	!
408	!-- Public functions
409	PUBLIC &
410	module_interface_parin, &
411	module_interface_check_parameters, &
412	module_interface_check_data_output_ts, &
413	module_interface_check_data_output_pr, &
414	module_interface_check_data_output, &
415	module_interface_init_masks, &
416	module_interface_define_netcdf_grid, &
417	module_interface_init_arrays, &
418	module_interface_init, &
419	module_interface_init_checks, &
420	module_interface_header, &
421	module_interface_actions, &
422	module_interface_non_advective_processes, &
423	module_interface_exchange_horiz, &
424	module_interface_prognostic_equations, &
425	module_interface_swap_timelevel, &
426	module_interface_3d_data_averaging, &
427	module_interface_data_output_2d, &
428	module_interface_data_output_3d, &
429	module_interface_statistics, &
430	module_interface_rrd_global, &
431	module_interface_wrd_global, &
432	module_interface_rrd_local, &
433	module_interface_wrd_local, &
434	module_interface_last_actions
435
436
437	INTERFACE module_interface_parin
438	MODULE PROCEDURE module_interface_parin
439	END INTERFACE module_interface_parin
440
441	INTERFACE module_interface_check_parameters
442	MODULE PROCEDURE module_interface_check_parameters
443	END INTERFACE module_interface_check_parameters
444
445	INTERFACE module_interface_check_data_output_ts
446	MODULE PROCEDURE module_interface_check_data_output_ts
447	END INTERFACE module_interface_check_data_output_ts
448
449	INTERFACE module_interface_check_data_output_pr
450	MODULE PROCEDURE module_interface_check_data_output_pr
451	END INTERFACE module_interface_check_data_output_pr
452
453	INTERFACE module_interface_check_data_output
454	MODULE PROCEDURE module_interface_check_data_output
455	END INTERFACE module_interface_check_data_output
456
457	INTERFACE module_interface_init_masks
458	MODULE PROCEDURE module_interface_init_masks
459	END INTERFACE module_interface_init_masks
460
461	INTERFACE module_interface_define_netcdf_grid
462	MODULE PROCEDURE module_interface_define_netcdf_grid
463	END INTERFACE module_interface_define_netcdf_grid
464
465	INTERFACE module_interface_init_arrays
466	MODULE PROCEDURE module_interface_init_arrays
467	END INTERFACE module_interface_init_arrays
468
469	INTERFACE module_interface_init
470	MODULE PROCEDURE module_interface_init
471	END INTERFACE module_interface_init
472
473	INTERFACE module_interface_init_checks
474	MODULE PROCEDURE module_interface_init_checks
475	END INTERFACE module_interface_init_checks
476
477	INTERFACE module_interface_header
478	MODULE PROCEDURE module_interface_header
479	END INTERFACE module_interface_header
480
481	INTERFACE module_interface_actions
482	MODULE PROCEDURE module_interface_actions
483	MODULE PROCEDURE module_interface_actions_ij
484	END INTERFACE module_interface_actions
485
486	INTERFACE module_interface_non_advective_processes
487	MODULE PROCEDURE module_interface_non_advective_processes
488	MODULE PROCEDURE module_interface_non_advective_processes_ij
489	END INTERFACE module_interface_non_advective_processes
490
491	INTERFACE module_interface_exchange_horiz
492	MODULE PROCEDURE module_interface_exchange_horiz
493	END INTERFACE module_interface_exchange_horiz
494
495	INTERFACE module_interface_prognostic_equations
496	MODULE PROCEDURE module_interface_prognostic_equations
497	MODULE PROCEDURE module_interface_prognostic_equations_ij
498	END INTERFACE module_interface_prognostic_equations
499
500	INTERFACE module_interface_swap_timelevel
501	MODULE PROCEDURE module_interface_swap_timelevel
502	END INTERFACE module_interface_swap_timelevel
503
504	INTERFACE module_interface_3d_data_averaging
505	MODULE PROCEDURE module_interface_3d_data_averaging
506	END INTERFACE module_interface_3d_data_averaging
507
508	INTERFACE module_interface_data_output_2d
509	MODULE PROCEDURE module_interface_data_output_2d
510	END INTERFACE module_interface_data_output_2d
511
512	INTERFACE module_interface_data_output_3d
513	MODULE PROCEDURE module_interface_data_output_3d
514	END INTERFACE module_interface_data_output_3d
515
516	INTERFACE module_interface_statistics
517	MODULE PROCEDURE module_interface_statistics
518	END INTERFACE module_interface_statistics
519
520	INTERFACE module_interface_rrd_global
521	MODULE PROCEDURE module_interface_rrd_global
522	END INTERFACE module_interface_rrd_global
523
524	INTERFACE module_interface_wrd_global
525	MODULE PROCEDURE module_interface_wrd_global
526	END INTERFACE module_interface_wrd_global
527
528	INTERFACE module_interface_rrd_local
529	MODULE PROCEDURE module_interface_rrd_local
530	END INTERFACE module_interface_rrd_local
531
532	INTERFACE module_interface_wrd_local
533	MODULE PROCEDURE module_interface_wrd_local
534	END INTERFACE module_interface_wrd_local
535
536	INTERFACE module_interface_last_actions
537	MODULE PROCEDURE module_interface_last_actions
538	END INTERFACE module_interface_last_actions
539
540
541	CONTAINS
542
543
544	!------------------------------------------------------------------------------!
545	! Description:
546	! ------------
547	!> Read module-specific parameter namelists
548	!------------------------------------------------------------------------------!
549	SUBROUTINE module_interface_parin
550
551
552	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
553
554	CALL bio_parin
555	CALL bcm_parin
556	CALL chem_parin
557	CALL flight_parin ! ToDo: rename module to match filename
558	CALL gust_parin
559	CALL im_parin
560	CALL lsm_parin
561	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
562	CALL mas_parin
563	CALL nesting_offl_parin
564	CALL ocean_parin
565	CALL pcm_parin
566	CALL radiation_parin
567	CALL salsa_parin
568	CALL spectra_parin
569	CALL surface_data_output_parin
570	CALL stg_parin
571	CALL user_parin ! ToDo: make user code a single Fortran module
572	CALL usm_parin
573	CALL vm_parin
574	CALL wtm_parin
575
576	CALL package_parin ! ToDo: deprecated, needs to be dissolved
577
578	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
579
580
581	END SUBROUTINE module_interface_parin
582
583
584	!------------------------------------------------------------------------------!
585	! Description:
586	! ------------
587	!> Perform module-specific initialization checks
588	!------------------------------------------------------------------------------!
589	SUBROUTINE module_interface_check_parameters
590
591
592	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
593
594	IF ( bulk_cloud_model ) CALL bcm_check_parameters
595	IF ( air_chemistry ) CALL chem_check_parameters
596	IF ( gust_module_enabled ) CALL gust_check_parameters
597	IF ( indoor_model ) CALL im_check_parameters
598	IF ( land_surface ) CALL lsm_check_parameters
599	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
600	IF ( nesting_offline ) CALL nesting_offl_check_parameters
601	IF ( ocean_mode ) CALL ocean_check_parameters
602	IF ( plant_canopy ) CALL pcm_check_parameters
603	IF ( radiation ) CALL radiation_check_parameters
604	IF ( salsa ) CALL salsa_check_parameters
605	IF ( calculate_spectra ) CALL spectra_check_parameters
606	IF ( surface_output ) CALL surface_data_output_check_parameters
607	IF ( syn_turb_gen ) CALL stg_check_parameters
608	IF ( urban_surface ) CALL usm_check_parameters
609	IF ( virtual_measurement ) CALL vm_check_parameters
610	IF ( wind_turbine ) CALL wtm_check_parameters
611	IF ( user_module_enabled ) CALL user_check_parameters
612
613	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
614
615
616	END SUBROUTINE module_interface_check_parameters
617
618
619	!------------------------------------------------------------------------------!
620	! Description:
621	! ------------
622	!> Check module-specific data output of timeseries
623	!------------------------------------------------------------------------------!
624	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
625
626
627	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
628	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
629	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
630	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
631
632
633	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
634
635	IF ( radiation ) THEN
636	CALL radiation_check_data_output_ts( dots_max, dots_num )
637	ENDIF
638
639	IF ( user_module_enabled ) THEN
640	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
641	ENDIF
642
643	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
644
645
646	END SUBROUTINE module_interface_check_data_output_ts
647
648
649	!------------------------------------------------------------------------------!
650	! Description:
651	! ------------
652	!> Check module-specific data output of profiles
653	!------------------------------------------------------------------------------!
654	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
655	dopr_unit )
656
657
658	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
659	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
660	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
661	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
662
663
664	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
665
666	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
667	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
668	ENDIF
669
670	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
671	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
672	ENDIF
673
674	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
675	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
676	ENDIF
677
678	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
679	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
680	ENDIF
681
682	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
683	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
684	ENDIF
685
686	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
687	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
688	ENDIF
689
690	IF ( unit == 'illegal' .AND. radiation ) THEN
691	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
692	ENDIF
693
694	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
695	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
696	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
697	ENDIF
698
699	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
700
701
702	END SUBROUTINE module_interface_check_data_output_pr
703
704	!------------------------------------------------------------------------------!
705	! Description:
706	! ------------
707	!> Check module-specific 2D and 3D data output
708	!------------------------------------------------------------------------------!
709	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
710
711
712	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
713	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
714
715	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
716	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
717	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
718	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
719
720
721	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
722
723	IF ( unit == 'illegal' .AND. biometeorology ) THEN
724	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
725	ENDIF
726
727	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
728	CALL bcm_check_data_output( variable, unit )
729	ENDIF
730
731	IF ( unit == 'illegal' .AND. air_chemistry &
732	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
733	CALL chem_check_data_output( variable, unit, i, ilen, k )
734	ENDIF
735
736	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
737	CALL gust_check_data_output( variable, unit )
738	ENDIF
739
740	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
741	CALL lsm_check_data_output( variable, unit, i, ilen, k )
742	ENDIF
743
744	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
745	CALL ocean_check_data_output( variable, unit )
746	ENDIF
747
748	IF ( unit == 'illegal' .AND. plant_canopy &
749	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
750	CALL pcm_check_data_output( variable, unit )
751	ENDIF
752
753	IF ( unit == 'illegal' .AND. radiation ) THEN
754	CALL radiation_check_data_output( variable, unit, i, ilen, k )
755	ENDIF
756
757	IF ( unit == 'illegal' .AND. salsa ) THEN
758	CALL salsa_check_data_output( variable, unit )
759	ENDIF
760
761	IF ( unit == 'illegal' .AND. indoor_model ) THEN
762	CALL im_check_data_output( variable, unit )
763	ENDIF
764
765	IF ( unit == 'illegal' .AND. urban_surface &
766	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
767	CALL usm_check_data_output( variable, unit )
768	ENDIF
769
770	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
771	unit = ''
772	CALL user_check_data_output( variable, unit )
773	ENDIF
774
775	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
776
777
778	END SUBROUTINE module_interface_check_data_output
779
780
781	!------------------------------------------------------------------------------!
782	!
783	! Description:
784	! ------------
785	!> Interface for init_masks. ToDo: get rid of these redundant calls!
786	!------------------------------------------------------------------------------!
787	SUBROUTINE module_interface_init_masks( variable, unit )
788
789
790	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
791	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
792
793
794	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
795
796	IF ( unit == 'illegal' .AND. air_chemistry &
797	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
798	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
799	ENDIF
800
801	IF ( unit == 'illegal' .AND. radiation ) THEN
802	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
803	ENDIF
804
805	IF ( unit == 'illegal' .AND. salsa ) THEN
806	CALL salsa_check_data_output( variable, unit )
807	ENDIF
808
809	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
810	unit = ''
811	CALL user_check_data_output( variable, unit )
812	ENDIF
813
814	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
815
816
817	END SUBROUTINE module_interface_init_masks
818
819
820	!------------------------------------------------------------------------------!
821	!
822	! Description:
823	! ------------
824	!> Define appropriate grid for module-specific netcdf output variables.
825	!------------------------------------------------------------------------------!
826	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
827	grid_x, grid_y, grid_z )
828
829
830	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
831	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
832	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
833	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
834	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
835
836
837	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
838	!
839	!-- As long as no action is done in this subroutine, initialize strings with
840	!-- intent(out) attribute, in order to avoid compiler warnings.
841	found = .FALSE.
842	grid_x = 'none'
843	grid_y = 'none'
844	grid_z = 'none'
845	!
846	!-- Use var to avoid compiler warning about unused variable
847	IF ( var == ' ' ) RETURN
848
849	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
850
851
852	END SUBROUTINE module_interface_define_netcdf_grid
853
854
855	!------------------------------------------------------------------------------!
856	! Description:
857	! ------------
858	!> Allocate module-specific arrays and pointers
859	!------------------------------------------------------------------------------!
860	SUBROUTINE module_interface_init_arrays
861
862
863	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
864
865	IF ( bulk_cloud_model ) CALL bcm_init_arrays
866	IF ( air_chemistry ) CALL chem_init_arrays
867	IF ( gust_module_enabled ) CALL gust_init_arrays
868	IF ( land_surface ) CALL lsm_init_arrays
869	IF ( ocean_mode ) CALL ocean_init_arrays
870	IF ( salsa ) CALL salsa_init_arrays
871	IF ( urban_surface ) CALL usm_init_arrays
872	IF ( surface_output ) CALL surface_data_output_init_arrays
873	IF ( wind_turbine ) CALL wtm_init_arrays
874	IF ( user_module_enabled ) CALL user_init_arrays
875
876	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
877
878
879	END SUBROUTINE module_interface_init_arrays
880
881
882	!------------------------------------------------------------------------------!
883	! Description:
884	! ------------
885	!> Perform module-specific initialization
886	!------------------------------------------------------------------------------!
887	SUBROUTINE module_interface_init
888
889
890	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
891
892	IF ( biometeorology ) CALL bio_init
893	IF ( bulk_cloud_model ) CALL bcm_init
894	IF ( air_chemistry ) CALL chem_init
895	IF ( virtual_flight ) CALL flight_init
896	IF ( gust_module_enabled ) CALL gust_init
897	IF ( indoor_model ) CALL im_init
898	IF ( large_scale_forcing ) CALL lsf_init
899	IF ( land_surface ) CALL lsm_init
900	IF ( nudging ) CALL nudge_init
901	IF ( ocean_mode ) CALL ocean_init
902	IF ( plant_canopy ) CALL pcm_init
903	IF ( salsa ) CALL salsa_init
904	IF ( urban_surface ) CALL usm_init
905	IF ( virtual_measurement ) CALL vm_init
906	IF ( wind_turbine ) CALL wtm_init
907	IF ( radiation ) CALL radiation_init
908	IF ( user_module_enabled ) CALL user_init
909
910	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
911
912
913	END SUBROUTINE module_interface_init
914
915
916	!------------------------------------------------------------------------------!
917	! Description:
918	! ------------
919	!> Perform module-specific post-initialization checks
920	!------------------------------------------------------------------------------!
921	SUBROUTINE module_interface_init_checks
922
923
924	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
925
926	IF ( biometeorology ) CALL bio_init_checks
927
928	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
929
930
931	END SUBROUTINE module_interface_init_checks
932
933
934	!------------------------------------------------------------------------------!
935	! Description:
936	! ------------
937	!> Gather module-specific header output
938	!------------------------------------------------------------------------------!
939	SUBROUTINE module_interface_header( io )
940
941
942	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
943
944
945	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
946
947	IF ( biometeorology ) CALL bio_header ( io )
948	IF ( bulk_cloud_model ) CALL bcm_header( io )
949	IF ( air_chemistry ) CALL chem_header ( io )
950	IF ( virtual_flight ) CALL flight_header( io )
951	IF ( gust_module_enabled ) CALL gust_header( io )
952	IF ( land_surface ) CALL lsm_header( io )
953	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
954	IF ( nesting_offline ) CALL nesting_offl_header( io )
955	IF ( ocean_mode ) CALL ocean_header( io )
956	IF ( plant_canopy ) CALL pcm_header( io )
957	IF ( radiation ) CALL radiation_header( io )
958	IF ( salsa ) CALL salsa_header( io )
959	IF ( calculate_spectra ) CALL spectra_header( io )
960	IF ( syn_turb_gen ) CALL stg_header( io )
961	IF ( user_module_enabled ) CALL user_header( io )
962
963	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
964
965
966	END SUBROUTINE module_interface_header
967
968
969	!------------------------------------------------------------------------------!
970	! Description:
971	! ------------
972	!> Perform module-specific actions while in time-integration (vector-optimized)
973	!------------------------------------------------------------------------------!
974	SUBROUTINE module_interface_actions( location )
975
976
977	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
978
979
980	IF ( bulk_cloud_model ) CALL bcm_actions( location )
981	IF ( air_chemistry ) CALL chem_actions( location )
982	IF ( gust_module_enabled ) CALL gust_actions( location )
983	IF ( ocean_mode ) CALL ocean_actions( location )
984	IF ( salsa ) CALL salsa_actions( location )
985	IF ( wind_turbine ) CALL wtm_actions( location )
986	IF ( user_module_enabled ) CALL user_actions( location )
987
988
989	END SUBROUTINE module_interface_actions
990
991
992	!------------------------------------------------------------------------------!
993	! Description:
994	! ------------
995	!> Perform module-specific actions while in time-integration (cache-optimized)
996	!------------------------------------------------------------------------------!
997	SUBROUTINE module_interface_actions_ij( i, j, location )
998
999
1000	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1001	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1002	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1003
1004
1005	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1006	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1007	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1008	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1009	IF ( salsa ) CALL salsa_actions( i, j, location )
1010	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1011	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1012
1013
1014	END SUBROUTINE module_interface_actions_ij
1015
1016
1017	!------------------------------------------------------------------------------!
1018	! Description:
1019	! ------------
1020	!> Compute module-specific non_advective_processes (vector-optimized)
1021	!------------------------------------------------------------------------------!
1022	SUBROUTINE module_interface_non_advective_processes()
1023
1024
1025	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes()
1026	IF ( air_chemistry ) CALL chem_non_advective_processes()
1027	IF ( salsa ) CALL salsa_non_advective_processes()
1028
1029
1030	END SUBROUTINE module_interface_non_advective_processes
1031
1032
1033	!------------------------------------------------------------------------------!
1034	! Description:
1035	! ------------
1036	!> Compute module-specific non_advective_processes (cache-optimized)
1037	!------------------------------------------------------------------------------!
1038	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1039
1040
1041	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1042	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1043
1044
1045	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1046	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1047	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1048
1049
1050	END SUBROUTINE module_interface_non_advective_processes_ij
1051
1052	!------------------------------------------------------------------------------!
1053	! Description:
1054	! ------------
1055	!> Exchange horiz for module-specific quantities
1056	!------------------------------------------------------------------------------!
1057	SUBROUTINE module_interface_exchange_horiz()
1058
1059
1060	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1061
1062	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz()
1063	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds()
1064	IF ( salsa ) CALL salsa_exchange_horiz_bounds()
1065
1066	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1067
1068
1069	END SUBROUTINE module_interface_exchange_horiz
1070
1071
1072	!------------------------------------------------------------------------------!
1073	! Description:
1074	! ------------
1075	!> Compute module-specific prognostic_equations (vector-optimized)
1076	!------------------------------------------------------------------------------!
1077	SUBROUTINE module_interface_prognostic_equations()
1078
1079
1080	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations()
1081	IF ( air_chemistry ) CALL chem_prognostic_equations()
1082	IF ( gust_module_enabled ) CALL gust_prognostic_equations()
1083	IF ( ocean_mode ) CALL ocean_prognostic_equations()
1084	IF ( salsa ) CALL salsa_prognostic_equations()
1085
1086
1087	END SUBROUTINE module_interface_prognostic_equations
1088
1089
1090	!------------------------------------------------------------------------------!
1091	! Description:
1092	! ------------
1093	!> Compute module-specific prognostic_equations (cache-optimized)
1094	!------------------------------------------------------------------------------!
1095	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1096
1097
1098	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1099	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1100	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1101	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1102
1103
1104	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1105	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1106	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1107	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1108	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1109
1110
1111	END SUBROUTINE module_interface_prognostic_equations_ij
1112
1113
1114	!------------------------------------------------------------------------------!
1115	! Description:
1116	! ------------
1117	!> Swap the timelevel pointers for module-specific arrays
1118	!------------------------------------------------------------------------------!
1119	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1120
1121
1122	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1123
1124
1125	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1126
1127	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1128	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1129	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1130	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1131	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1132	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1133	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1134
1135	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1136
1137
1138	END SUBROUTINE module_interface_swap_timelevel
1139
1140
1141	!------------------------------------------------------------------------------!
1142	!
1143	! Description:
1144	! ------------
1145	!> Perform module-specific averaging of 3D data
1146	!------------------------------------------------------------------------------!
1147	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1148
1149
1150	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1151	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1152
1153
1154	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1155
1156	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1157	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1158	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1159	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1160	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1161	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1162	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1163	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1164	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1165	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1166
1167	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1168
1169
1170	END SUBROUTINE module_interface_3d_data_averaging
1171
1172	!------------------------------------------------------------------------------!
1173	!
1174	! Description:
1175	! ------------
1176	!> Define module-specific 2D output variables
1177	!------------------------------------------------------------------------------!
1178	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1179	local_pf, two_d, nzb_do, nzt_do, &
1180	fill_value )
1181
1182	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1183	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1184	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1185	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1186	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1187	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1188	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1189	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1190	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1191
1192	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1193
1194
1195	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1196
1197	IF ( .NOT. found .AND. biometeorology ) THEN
1198	CALL bio_data_output_2d( &
1199	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1200	)
1201	ENDIF
1202
1203	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1204	CALL bcm_data_output_2d( &
1205	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1206	)
1207	ENDIF
1208
1209	IF ( .NOT. found .AND. air_chemistry ) THEN
1210	CALL chem_data_output_2d( &
1211	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1212	)
1213	ENDIF
1214
1215	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1216	CALL gust_data_output_2d( &
1217	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1218	)
1219	ENDIF
1220
1221	IF ( .NOT. found .AND. land_surface ) THEN
1222	CALL lsm_data_output_2d( &
1223	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1224	)
1225	ENDIF
1226
1227	IF ( .NOT. found .AND. ocean_mode ) THEN
1228	CALL ocean_data_output_2d( &
1229	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1230	)
1231	ENDIF
1232
1233	IF ( .NOT. found .AND. radiation ) THEN
1234	CALL radiation_data_output_2d( &
1235	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1236	)
1237	ENDIF
1238
1239	IF ( .NOT. found .AND. salsa ) THEN
1240	CALL salsa_data_output_2d( &
1241	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1242	)
1243	ENDIF
1244
1245	IF ( .NOT. found .AND. user_module_enabled ) THEN
1246	CALL user_data_output_2d( &
1247	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1248	)
1249	ENDIF
1250
1251	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1252
1253
1254	END SUBROUTINE module_interface_data_output_2d
1255
1256
1257	!------------------------------------------------------------------------------!
1258	!
1259	! Description:
1260	! ------------
1261	!> Define module-specific 3D output variables
1262	!------------------------------------------------------------------------------!
1263	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1264	fill_value, resorted, nzb_do, nzt_do )
1265
1266
1267	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1268	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1269	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1270	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1271	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1272	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1273	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1274
1275	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1276
1277
1278	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1279
1280	IF ( .NOT. found .AND. biometeorology ) THEN
1281	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1282	resorted = .FALSE.
1283	ENDIF
1284
1285	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1286	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1287	resorted = .TRUE.
1288	ENDIF
1289
1290	IF ( .NOT. found .AND. air_chemistry ) THEN
1291	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1292	resorted = .TRUE.
1293	ENDIF
1294
1295	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1296	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1297	resorted = .TRUE.
1298	ENDIF
1299
1300	IF ( .NOT. found .AND. indoor_model ) THEN
1301	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1302	resorted = .TRUE.
1303	ENDIF
1304
1305	IF ( .NOT. found .AND. ocean_mode ) THEN
1306	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1307	resorted = .TRUE.
1308	ENDIF
1309
1310	IF ( .NOT. found .AND. plant_canopy ) THEN
1311	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1312	resorted = .TRUE.
1313	ENDIF
1314
1315	IF ( .NOT. found .AND. radiation ) THEN
1316	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1317	resorted = .TRUE.
1318	ENDIF
1319
1320	IF ( .NOT. found .AND. salsa ) THEN
1321	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1322	resorted = .TRUE.
1323	ENDIF
1324
1325	IF ( .NOT. found .AND. user_module_enabled ) THEN
1326	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1327	resorted = .TRUE.
1328	ENDIF
1329
1330	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1331
1332
1333	END SUBROUTINE module_interface_data_output_3d
1334
1335
1336	!------------------------------------------------------------------------------!
1337	! Description:
1338	! ------------
1339	!> Compute module-specific profile and timeseries data
1340	!------------------------------------------------------------------------------!
1341	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1342
1343
1344	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1345	INTEGER(iwp), INTENT(IN) :: sr !<
1346	INTEGER(iwp), INTENT(IN) :: tn !<
1347	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1348
1349
1350	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1351
1352	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1353	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1354	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1355
1356	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1357
1358
1359	END SUBROUTINE module_interface_statistics
1360
1361
1362	!------------------------------------------------------------------------------!
1363	! Description:
1364	! ------------
1365	!> Read module-specific restart data globaly shared by all MPI ranks
1366	!------------------------------------------------------------------------------!
1367	SUBROUTINE module_interface_rrd_global( found )
1368
1369
1370	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1371
1372
1373	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1374
1375	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1376	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1377	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1378	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1379	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1380	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1381	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1382	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1383	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1384
1385	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1386
1387
1388	END SUBROUTINE module_interface_rrd_global
1389
1390
1391	!------------------------------------------------------------------------------!
1392	! Description:
1393	! ------------
1394	!> Write module-specific restart data globaly shared by all MPI ranks
1395	!------------------------------------------------------------------------------!
1396	SUBROUTINE module_interface_wrd_global
1397
1398
1399	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1400
1401	IF ( biometeorology ) CALL bio_wrd_global
1402	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1403	IF ( virtual_flight ) CALL flight_wrd_global
1404	IF ( gust_module_enabled ) CALL gust_wrd_global
1405	IF ( ocean_mode ) CALL ocean_wrd_global
1406	IF ( syn_turb_gen ) CALL stg_wrd_global
1407	IF ( wind_turbine ) CALL wtm_wrd_global
1408	IF ( surface_output ) CALL surface_data_output_wrd_global
1409	IF ( user_module_enabled ) CALL user_wrd_global
1410
1411	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1412
1413
1414	END SUBROUTINE module_interface_wrd_global
1415
1416
1417	!------------------------------------------------------------------------------!
1418	! Description:
1419	! ------------
1420	!> Read module-specific restart data specific to local MPI ranks
1421	!------------------------------------------------------------------------------!
1422	SUBROUTINE module_interface_rrd_local( map_index, &
1423	nxlf, nxlc, nxl_on_file, &
1424	nxrf, nxrc, nxr_on_file, &
1425	nynf, nync, nyn_on_file, &
1426	nysf, nysc, nys_on_file, &
1427	tmp_2d, tmp_3d, found )
1428
1429
1430	INTEGER(iwp), INTENT(IN) :: map_index !<
1431	INTEGER(iwp), INTENT(IN) :: nxlc !<
1432	INTEGER(iwp), INTENT(IN) :: nxlf !<
1433	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1434	INTEGER(iwp), INTENT(IN) :: nxrc !<
1435	INTEGER(iwp), INTENT(IN) :: nxrf !<
1436	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1437	INTEGER(iwp), INTENT(IN) :: nync !<
1438	INTEGER(iwp), INTENT(IN) :: nynf !<
1439	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1440	INTEGER(iwp), INTENT(IN) :: nysc !<
1441	INTEGER(iwp), INTENT(IN) :: nysf !<
1442	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1443	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1444
1445	REAL(wp), DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), INTENT(OUT) :: tmp_2d !<
1446	REAL(wp), DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), INTENT(OUT) :: tmp_3d !<
1447
1448
1449	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1450
1451	IF ( .NOT. found ) CALL bio_rrd_local( &
1452	found &
1453	)
1454
1455	IF ( .NOT. found ) CALL bcm_rrd_local( &
1456	map_index, &
1457	nxlf, nxlc, nxl_on_file, &
1458	nxrf, nxrc, nxr_on_file, &
1459	nynf, nync, nyn_on_file, &
1460	nysf, nysc, nys_on_file, &
1461	tmp_2d, tmp_3d, found &
1462	) ! ToDo: change interface to pass variable
1463
1464	IF ( .NOT. found ) CALL chem_rrd_local( &
1465	map_index, &
1466	nxlf, nxlc, nxl_on_file, &
1467	nxrf, nxrc, nxr_on_file, &
1468	nynf, nync, nyn_on_file, &
1469	nysf, nysc, nys_on_file, &
1470	tmp_3d, found &
1471	) ! ToDo: change interface to pass variable
1472
1473	IF ( .NOT. found ) CALL gust_rrd_local( &
1474	map_index, &
1475	nxlf, nxlc, nxl_on_file, &
1476	nxrf, nxrc, nxr_on_file, &
1477	nynf, nync, nyn_on_file, &
1478	nysf, nysc, nys_on_file, &
1479	tmp_2d, tmp_3d, found &
1480	) ! ToDo: change interface to pass variable
1481
1482	IF ( .NOT. found ) CALL lsm_rrd_local( &
1483	map_index, &
1484	nxlf, nxlc, nxl_on_file, &
1485	nxrf, nxrc, nxr_on_file, &
1486	nynf, nync, nyn_on_file, &
1487	nysf, nysc, nys_on_file, &
1488	tmp_2d, found &
1489	) ! ToDo: change interface to pass variable
1490
1491	IF ( .NOT. found ) CALL ocean_rrd_local( &
1492	map_index, &
1493	nxlf, nxlc, nxl_on_file, &
1494	nxrf, nxrc, nxr_on_file, &
1495	nynf, nync, nyn_on_file, &
1496	nysf, nysc, nys_on_file, &
1497	tmp_3d, found &
1498	) ! ToDo: change interface to pass variable
1499
1500	IF ( .NOT. found ) CALL radiation_rrd_local( &
1501	map_index, &
1502	nxlf, nxlc, nxl_on_file, &
1503	nxrf, nxrc, nxr_on_file, &
1504	nynf, nync, nyn_on_file, &
1505	nysf, nysc, nys_on_file, &
1506	tmp_2d, tmp_3d, found &
1507	) ! ToDo: change interface to pass variable
1508
1509	IF ( .NOT. found ) CALL salsa_rrd_local( &
1510	map_index, &
1511	nxlf, nxlc, nxl_on_file, &
1512	nxrf, nxrc, nxr_on_file, &
1513	nynf, nync, nyn_on_file, &
1514	nysf, nysc, nys_on_file, &
1515	tmp_3d, found &
1516	) ! ToDo: change interface to pass variable
1517
1518	IF ( .NOT. found ) CALL usm_rrd_local( &
1519	map_index, &
1520	nxlf, nxlc, nxl_on_file, &
1521	nxrf, nxr_on_file, &
1522	nynf, nyn_on_file, &
1523	nysf, nysc, nys_on_file, &
1524	found &
1525	) ! ToDo: change interface to pass variable
1526	!
1527	!-- Surface data do not need overlap data, so do not pass these information.
1528	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1529
1530	IF ( .NOT. found ) CALL user_rrd_local( &
1531	map_index, &
1532	nxlf, nxlc, nxl_on_file, &
1533	nxrf, nxrc, nxr_on_file, &
1534	nynf, nync, nyn_on_file, &
1535	nysf, nysc, nys_on_file, &
1536	tmp_3d, found &
1537	) ! ToDo: change interface to pass variable
1538
1539	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1540
1541
1542	END SUBROUTINE module_interface_rrd_local
1543
1544
1545	!------------------------------------------------------------------------------!
1546	! Description:
1547	! ------------
1548	!> Write module-specific restart data specific to local MPI ranks
1549	!------------------------------------------------------------------------------!
1550	SUBROUTINE module_interface_wrd_local
1551
1552
1553	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1554
1555	IF ( biometeorology ) CALL bio_wrd_local
1556	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1557	IF ( air_chemistry ) CALL chem_wrd_local
1558	IF ( gust_module_enabled ) CALL gust_wrd_local
1559	IF ( land_surface ) CALL lsm_wrd_local
1560	IF ( ocean_mode ) CALL ocean_wrd_local
1561	IF ( radiation ) CALL radiation_wrd_local
1562	IF ( salsa ) CALL salsa_wrd_local
1563	IF ( urban_surface ) CALL usm_wrd_local
1564	IF ( surface_output ) CALL surface_data_output_wrd_local
1565	IF ( user_module_enabled ) CALL user_wrd_local
1566
1567	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1568
1569
1570	END SUBROUTINE module_interface_wrd_local
1571
1572
1573	!------------------------------------------------------------------------------!
1574	! Description:
1575	! ------------
1576	!> Perform module-specific last actions before the program terminates
1577	!------------------------------------------------------------------------------!
1578	SUBROUTINE module_interface_last_actions
1579
1580
1581	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1582
1583	IF ( virtual_measurement ) CALL vm_last_actions
1584	IF ( user_module_enabled ) CALL user_last_actions
1585
1586	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1587
1588
1589	END SUBROUTINE module_interface_last_actions
1590
1591
1592	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |