Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4719

Last change on this file since 4719 was 4708, checked in by suehring, 4 years ago
Bugfix, correct mapping of RRTMG heating rates, as well as incoming/outgoing radiation onto the topography-following grid; add fill values to the radiation output
Property svn:keywords set to `Id`
File size: 92.6 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4708 2020-09-28 17:42:58Z pavelkrc $
27	! pass fillvalue attribute to radiation output
28	!
29	! 4590 2020-07-06 14:34:59Z suehring
30	! Enable mpi-io for biomet
31	!
32	! 4525 2020-05-10 17:05:07Z raasch
33	! added restart I/O for global salsa data,
34	! added restart with MPI-IO for salsa
35	!
36	! 4518 2020-05-04 15:44:28Z suehring
37	! Call of doq_rrd_local enabled
38	!
39	! 4517 2020-05-03 14:29:30Z raasch
40	! added restart with MPI-IO for reading local arrays
41	!
42	! 4514 2020-04-30 16:29:59Z suehring
43	! Added global restart routines for plant-canopy model
44	!
45	! 4495 2020-04-13 20:11:20Z raasch
46	! restart data handling with MPI-IO added
47	!
48	! 4414 2020-02-19 20:16:04Z suehring
49	! Add module interface for basic initialization of numerics.
50	!
51	! 4411 2020-02-18 14:28:02Z maronga
52	! Added output routines for WTM
53	!
54	! 4407 2020-02-13 20:31:44Z knoop
55	! Changed program_debug_output_unit to 9 in dom_init call
56	!
57	! 4400 2020-02-10 20:32:41Z suehring
58	! - Use data-output module for virtual measurement output
59	! - Remove deprecated routines for virtual measurement module
60	!
61	! 4361 2020-01-07 12:22:38Z suehring
62	! Remove unused arrays in pmc_rrd_local
63	!
64	! 4360 2020-01-07 11:25:50Z suehring
65	! Add pcm_rrd_local and pcm_wrd_local
66	!
67	! 4331 2019-12-10 18:25:02Z suehring
68	! Change interface for doq_check_data_output, in order to perform further
69	! output checks.
70	!
71	! 4281 2019-10-29 15:15:39Z schwenkel
72	! Added dynamics boundary conditions
73	!
74	! 4272 2019-10-23 15:18:57Z schwenkel
75	! Further modularization of boundary conditions: moved boundary conditions to
76	! respective modules
77	!
78	! 4268 2019-10-17 11:29:38Z schwenkel
79	! Introduction of module_interface_boundary_conditions
80	!
81	! 4182 2019-08-22 15:20:23Z scharf
82	! Corrected "Former revisions" section
83	!
84	! 4173 2019-08-20 12:04:06Z gronemeier
85	! add vdi_internal_controls
86	!
87	! 4157 2019-08-14 09:19:12Z suehring
88	! Call doq_init from module interface
89	!
90	! 4132 2019-08-02 12:34:17Z suehring
91	! Bugfix in masked data output for diagnostic quantities
92	!
93	! 4131 2019-08-02 11:06:18Z monakurppa
94	! Add output of 3D plant-canopy outputs (merge from branch resler)
95	!
96	! 4048 2019-06-21 21:00:21Z knoop
97	! Moved turbulence_closure_mod calls into this module_interface
98	!
99	! 4047 2019-06-21 18:58:09Z knoop
100	! Introduction of the dynamics module
101	!
102	! 4039 2019-06-18 10:32:41Z suehring
103	! Introduce diagnostic output
104	!
105	! 4028 2019-06-13 12:21:37Z schwenkel
106	! Further modularization of particle code components
107	!
108	! 4017 2019-06-06 12:16:46Z schwenkel
109	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
110	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
111	! are not defined everywhere, e.g. land-surface outputs, this will be
112	! problematic as NaN will be output.
113	!
114	! 3987 2019-05-22 09:52:13Z kanani
115	! Introduce switchable DEBUG file output via debug_message routine
116	!
117	! 3956 2019-05-07 12:32:52Z monakurppa
118	! - Added calls for salsa_non_advective_processes and
119	! salsa_exchange_horiz_bounds
120	! - Moved the call for salsa_data_output_2d/3d before that of
121	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
122	! salsa output variable and encounters a segmentation fault for "Ntot" due
123	! to the shortoutput name
124	!
125	! 3931 2019-04-24 16:34:28Z schwenkel
126	! Changed non_transport_physics to non_advective_processes
127	!
128	! 3930 2019-04-24 14:57:18Z forkel
129	! Correct/complete module_interface introduction for chemistry model
130	!
131	! 3887 2019 -04-12 08:47:41Z schwenkel
132	! Changes related to global restructuring of location messages and introduction
133	! of additional debug messages
134	!
135	! 3880 2019 -04-08 21:43:02Z knoop
136	! Add a call for salsa_prognostic_equations
137	!
138	! 3840 2019-03-29 10:35:52Z knoop
139	! bugfix: intent of dummy arguments changed to inout
140	!
141	! 3770 2019-02-28 11:22:32Z moh.hefny
142	! removed unused variables in module_interface_check_data_output_ts
143	!
144	! 3767 08:18:02Z raasch
145	! unused variable file_index removed from subroutine parameter list
146	!
147	! 3766 2019-02-26 16:23:41Z raasch
148	! first argument removed from module_interface_rrd_*, statement added to avoid
149	! compiler warning about unused variable, file reformatted with respect to coding
150	! standards
151	!
152	! 3762 2019-02-25 16:54:16Z suehring
153	! only pass required arguments to surface_data_output_rrd_local
154	!
155	! 3747 2019-02-16 15:15:23Z gronemeier
156	! Call user_init_arrays
157	!
158	! 3745 2019-02-15 18:57:56Z suehring
159	! Add indoor model
160	!
161	! 3744 2019-02-15 18:38:58Z suehring
162	! Removed bio_check_parameters as the method is empty.
163	!
164	! 3735 2019-02-12 09:52:40Z dom_dwd_user
165	! Accepting variable j from check_parameters and passing it to
166	! bio_check_data_output
167	! Add required restart data for surface output module
168	!
169	! 3731 2019-02-11 13:06:27Z suehring
170	! Add check_parameters routine for virtual measurements
171	!
172	! 3711 2019-01-31 13:44:26Z knoop
173	! Introduced module_interface_init_checks for post-init checks
174	!
175	! 3705 2019-01-29 19:56:39Z suehring
176	! Add last_actions for virtual measurements
177	!
178	! 3704 2019-01-29 19:51:41Z suehring
179	! Some interface calls moved to module_interface + cleanup
180	!
181	! 3684 2019-01-20 20:20:58Z knoop
182	! Bugfix: made unit intend INOUT
183	!
184	! 3650 2019-01-04 13:01:33Z kanani
185	! Add restart routines for biometeorology
186	!
187	! 3649 2019-01-02 16:52:21Z suehring
188	! Initialize strings, in order to avoid compiler warnings for non-initialized
189	! characters with intent(out) attribute
190	!
191	! 3648 2019-01-02 16:35:46Z suehring
192	! 3641 2018-12-23 22:10:01Z knoop
193	! Initial implementation of the PALM module interface
194	!
195	!
196	! Description:
197	! ------------
198	!> This is the interface between the PALM model core and all its modules.
199	!>
200	!> @todo Re-format module to be consistent with coding standard
201	!------------------------------------------------------------------------------!
202	MODULE module_interface
203
204	USE indices, &
205	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
206
207	USE kinds
208
209	USE pegrid, &
210	ONLY: comm2d
211
212	!
213	!-- load module-specific control parameters.
214	!-- ToDo: move all of them to respective module or a dedicated central module
215	USE data_output_module, &
216	ONLY: dom_def_end, &
217	dom_finalize_output, &
218	dom_init
219
220	USE dynamics_mod, &
221	ONLY: dynamics_parin, &
222	dynamics_check_parameters, &
223	dynamics_check_data_output_ts, &
224	dynamics_check_data_output_pr, &
225	dynamics_check_data_output, &
226	dynamics_init_masks, &
227	dynamics_define_netcdf_grid, &
228	dynamics_init_arrays, &
229	dynamics_init, &
230	dynamics_init_checks, &
231	dynamics_header, &
232	dynamics_actions, &
233	dynamics_non_advective_processes, &
234	dynamics_exchange_horiz, &
235	dynamics_prognostic_equations, &
236	dynamics_boundary_conditions, &
237	dynamics_swap_timelevel, &
238	dynamics_3d_data_averaging, &
239	dynamics_data_output_2d, &
240	dynamics_data_output_3d, &
241	dynamics_statistics, &
242	dynamics_rrd_global, &
243	dynamics_rrd_local, &
244	dynamics_wrd_global, &
245	dynamics_wrd_local, &
246	dynamics_last_actions
247
248	USE turbulence_closure_mod, &
249	ONLY: tcm_check_parameters, &
250	tcm_check_data_output, &
251	tcm_init_arrays, &
252	tcm_init, &
253	tcm_actions, &
254	tcm_prognostic_equations, &
255	tcm_boundary_conds, &
256	tcm_swap_timelevel, &
257	tcm_3d_data_averaging, &
258	tcm_data_output_2d, &
259	tcm_data_output_3d
260
261	USE control_parameters, &
262	ONLY: air_chemistry, &
263	biometeorology, &
264	coupling_char, &
265	debug_output, &
266	debug_output_timestep, &
267	indoor_model, &
268	land_surface, &
269	large_scale_forcing, &
270	nesting_offline, &
271	nudging, &
272	ocean_mode, &
273	plant_canopy, &
274	salsa, &
275	surface_output, &
276	syn_turb_gen, &
277	urban_surface, &
278	vdi_checks, &
279	virtual_flight, &
280	virtual_measurement, &
281	wind_turbine
282
283	!
284	!-- load interface routines of all PALM modules
285	USE biometeorology_mod, &
286	ONLY: bio_parin, &
287	bio_check_data_output, &
288	bio_init, &
289	bio_init_checks, &
290	bio_header, &
291	bio_3d_data_averaging, &
292	bio_data_output_2d, &
293	bio_data_output_3d, &
294	bio_rrd_global, &
295	bio_rrd_local, &
296	bio_wrd_global, &
297	bio_wrd_local
298
299	USE bulk_cloud_model_mod, &
300	ONLY: bulk_cloud_model, &
301	bcm_parin, &
302	bcm_check_parameters, &
303	bcm_check_data_output_pr, &
304	bcm_check_data_output, &
305	bcm_init_arrays, &
306	bcm_init, &
307	bcm_header, &
308	bcm_actions, &
309	bcm_non_advective_processes, &
310	bcm_exchange_horiz, &
311	bcm_prognostic_equations, &
312	bcm_boundary_conditions, &
313	bcm_swap_timelevel, &
314	bcm_3d_data_averaging, &
315	bcm_data_output_2d, &
316	bcm_data_output_3d, &
317	bcm_rrd_global, &
318	bcm_wrd_global, &
319	bcm_rrd_local, &
320	bcm_wrd_local
321
322	USE chemistry_model_mod, &
323	ONLY: chem_parin, &
324	chem_check_parameters, &
325	chem_check_data_output_pr, &
326	chem_check_data_output, &
327	chem_exchange_horiz_bounds, &
328	chem_init_arrays, &
329	chem_init, &
330	chem_header, &
331	chem_actions, &
332	chem_non_advective_processes, &
333	chem_prognostic_equations, &
334	chem_boundary_conditions, &
335	chem_swap_timelevel, &
336	chem_3d_data_averaging, &
337	chem_data_output_2d, &
338	chem_data_output_3d, &
339	chem_statistics, &
340	chem_rrd_local, &
341	chem_wrd_local
342
343	USE diagnostic_output_quantities_mod, &
344	ONLY: doq_3d_data_averaging, &
345	doq_check_data_output, &
346	doq_define_netcdf_grid, &
347	doq_init, &
348	doq_output_2d, &
349	doq_output_3d, &
350	doq_rrd_local, &
351	doq_wrd_local
352
353	USE flight_mod, &
354	ONLY: flight_parin, &
355	flight_header, &
356	flight_init, &
357	flight_rrd_global, &
358	flight_wrd_global
359
360	USE gust_mod, &
361	ONLY: gust_module_enabled, &
362	gust_parin, &
363	gust_check_parameters, &
364	gust_check_data_output_pr, &
365	gust_check_data_output, &
366	gust_init_arrays, &
367	gust_init, &
368	gust_header, &
369	gust_actions, &
370	gust_prognostic_equations, &
371	gust_swap_timelevel, &
372	gust_3d_data_averaging, &
373	gust_data_output_2d, &
374	gust_data_output_3d, &
375	gust_statistics, &
376	gust_rrd_global, &
377	gust_wrd_global, &
378	gust_rrd_local, &
379	gust_wrd_local
380
381	USE indoor_model_mod, &
382	ONLY: im_parin, &
383	im_check_data_output, &
384	im_check_parameters, &
385	im_data_output_3d, &
386	im_init
387
388	USE lagrangian_particle_model_mod, &
389	ONLY: lpm_parin, &
390	lpm_header, &
391	lpm_check_parameters, &
392	lpm_init_arrays, &
393	lpm_init, &
394	lpm_actions, &
395	lpm_rrd_global, &
396	lpm_rrd_local, &
397	lpm_wrd_local, &
398	lpm_wrd_global
399
400	USE land_surface_model_mod, &
401	ONLY: lsm_parin, &
402	lsm_check_parameters, &
403	lsm_check_data_output_pr, &
404	lsm_check_data_output, &
405	lsm_init_arrays, &
406	lsm_init, &
407	lsm_header, &
408	lsm_swap_timelevel, &
409	lsm_3d_data_averaging, &
410	lsm_data_output_2d, &
411	lsm_rrd_local, &
412	lsm_wrd_local
413
414	USE lsf_nudging_mod, &
415	ONLY: lsf_nudging_check_parameters, &
416	lsf_nudging_check_data_output_pr, &
417	lsf_init, &
418	nudge_init, &
419	lsf_nudging_header
420
421	USE multi_agent_system_mod, &
422	ONLY: mas_parin
423
424	USE nesting_offl_mod, &
425	ONLY: nesting_offl_parin, &
426	nesting_offl_check_parameters, &
427	nesting_offl_header
428
429	USE ocean_mod, &
430	ONLY: ocean_parin, &
431	ocean_check_parameters, &
432	ocean_check_data_output_pr, &
433	ocean_check_data_output, &
434	ocean_init_arrays, &
435	ocean_init, &
436	ocean_header, &
437	ocean_actions, &
438	ocean_prognostic_equations, &
439	ocean_boundary_conditions, &
440	ocean_swap_timelevel, &
441	ocean_3d_data_averaging, &
442	ocean_data_output_2d, &
443	ocean_data_output_3d, &
444	ocean_rrd_global, &
445	ocean_wrd_global, &
446	ocean_rrd_local, &
447	ocean_wrd_local
448
449	USE particle_attributes, &
450	ONLY: particle_advection
451
452	USE poismg_noopt_mod, &
453	ONLY: poismg_noopt_init
454
455	USE plant_canopy_model_mod, &
456	ONLY: pcm_parin, &
457	pcm_check_parameters, &
458	pcm_check_data_output, &
459	pcm_init, &
460	pcm_header, &
461	pcm_3d_data_averaging, &
462	pcm_data_output_3d, &
463	pcm_rrd_global, &
464	pcm_rrd_local, &
465	pcm_wrd_global, &
466	pcm_wrd_local
467
468	USE radiation_model_mod, &
469	ONLY: radiation, &
470	radiation_parin, &
471	radiation_check_parameters, &
472	radiation_check_data_output_ts, &
473	radiation_check_data_output_pr, &
474	radiation_check_data_output, &
475	radiation_init, &
476	radiation_header, &
477	radiation_3d_data_averaging, &
478	radiation_data_output_2d, &
479	radiation_data_output_3d, &
480	radiation_rrd_local, &
481	radiation_wrd_local
482
483	USE salsa_mod, &
484	ONLY: salsa_parin, &
485	salsa_check_parameters, &
486	salsa_check_data_output_pr, &
487	salsa_check_data_output, &
488	salsa_init_arrays, &
489	salsa_init, &
490	salsa_header, &
491	salsa_actions, &
492	salsa_non_advective_processes, &
493	salsa_exchange_horiz_bounds, &
494	salsa_prognostic_equations, &
495	salsa_boundary_conditions, &
496	salsa_swap_timelevel, &
497	salsa_3d_data_averaging, &
498	salsa_data_output_2d, &
499	salsa_data_output_3d, &
500	salsa_statistics, &
501	salsa_rrd_global, &
502	salsa_rrd_local, &
503	salsa_wrd_global, &
504	salsa_wrd_local
505
506	USE spectra_mod, &
507	ONLY: calculate_spectra, &
508	spectra_parin, &
509	spectra_check_parameters, &
510	spectra_header
511
512	USE surface_data_output_mod, &
513	ONLY: surface_data_output_parin, &
514	surface_data_output_check_parameters, &
515	surface_data_output_init_arrays, &
516	surface_data_output_rrd_local, &
517	surface_data_output_rrd_global, &
518	surface_data_output_wrd_local, &
519	surface_data_output_wrd_global
520
521	USE surface_mod, &
522	ONLY: init_bc
523
524	USE synthetic_turbulence_generator_mod, &
525	ONLY: stg_parin, &
526	stg_check_parameters, &
527	stg_header, &
528	stg_rrd_global, &
529	stg_wrd_global
530
531	USE urban_surface_mod, &
532	ONLY: usm_parin, &
533	usm_check_parameters, &
534	usm_check_data_output, &
535	usm_init_arrays, &
536	usm_init, &
537	usm_swap_timelevel, &
538	usm_3d_data_averaging, &
539	usm_rrd_local, &
540	usm_wrd_local
541
542	USE vdi_internal_controls, &
543	ONLY: vdi_actions
544
545	USE virtual_measurement_mod, &
546	ONLY: vm_check_parameters, &
547	vm_init, &
548	vm_init_output, &
549	vm_parin
550
551	USE wind_turbine_model_mod, &
552	ONLY: wtm_parin, &
553	wtm_check_parameters, &
554	wtm_init, &
555	wtm_init_arrays, &
556	wtm_init_output, &
557	wtm_actions, &
558	wtm_rrd_global, &
559	wtm_wrd_global
560
561	USE user, &
562	ONLY: user_module_enabled, &
563	user_parin, &
564	user_check_parameters, &
565	user_check_data_output_ts, &
566	user_check_data_output_pr, &
567	user_check_data_output, &
568	user_init, &
569	user_init_arrays, &
570	user_header, &
571	user_actions, &
572	user_3d_data_averaging, &
573	user_data_output_2d, &
574	user_data_output_3d, &
575	user_statistics, &
576	user_rrd_global, &
577	user_rrd_local, &
578	user_wrd_global, &
579	user_wrd_local, &
580	user_last_actions
581
582	IMPLICIT NONE
583
584	PRIVATE
585
586	!
587	!-- Public functions
588	PUBLIC &
589	module_interface_parin, &
590	module_interface_check_parameters, &
591	module_interface_check_data_output_ts, &
592	module_interface_check_data_output_pr, &
593	module_interface_check_data_output, &
594	module_interface_init_masks, &
595	module_interface_define_netcdf_grid, &
596	module_interface_init_arrays, &
597	module_interface_init, &
598	module_interface_init_checks, &
599	module_interface_init_numerics, &
600	module_interface_init_output, &
601	module_interface_header, &
602	module_interface_actions, &
603	module_interface_non_advective_processes, &
604	module_interface_exchange_horiz, &
605	module_interface_prognostic_equations, &
606	module_interface_boundary_conditions, &
607	module_interface_swap_timelevel, &
608	module_interface_3d_data_averaging, &
609	module_interface_data_output_2d, &
610	module_interface_data_output_3d, &
611	module_interface_statistics, &
612	module_interface_rrd_global, &
613	module_interface_wrd_global, &
614	module_interface_rrd_local, &
615	module_interface_wrd_local, &
616	module_interface_last_actions
617
618
619	INTERFACE module_interface_parin
620	MODULE PROCEDURE module_interface_parin
621	END INTERFACE module_interface_parin
622
623	INTERFACE module_interface_check_parameters
624	MODULE PROCEDURE module_interface_check_parameters
625	END INTERFACE module_interface_check_parameters
626
627	INTERFACE module_interface_check_data_output_ts
628	MODULE PROCEDURE module_interface_check_data_output_ts
629	END INTERFACE module_interface_check_data_output_ts
630
631	INTERFACE module_interface_check_data_output_pr
632	MODULE PROCEDURE module_interface_check_data_output_pr
633	END INTERFACE module_interface_check_data_output_pr
634
635	INTERFACE module_interface_check_data_output
636	MODULE PROCEDURE module_interface_check_data_output
637	END INTERFACE module_interface_check_data_output
638
639	INTERFACE module_interface_init_masks
640	MODULE PROCEDURE module_interface_init_masks
641	END INTERFACE module_interface_init_masks
642
643	INTERFACE module_interface_define_netcdf_grid
644	MODULE PROCEDURE module_interface_define_netcdf_grid
645	END INTERFACE module_interface_define_netcdf_grid
646
647	INTERFACE module_interface_init_arrays
648	MODULE PROCEDURE module_interface_init_arrays
649	END INTERFACE module_interface_init_arrays
650
651	INTERFACE module_interface_init
652	MODULE PROCEDURE module_interface_init
653	END INTERFACE module_interface_init
654
655	INTERFACE module_interface_init_checks
656	MODULE PROCEDURE module_interface_init_checks
657	END INTERFACE module_interface_init_checks
658
659	INTERFACE module_interface_init_numerics
660	MODULE PROCEDURE module_interface_init_numerics
661	END INTERFACE module_interface_init_numerics
662
663	INTERFACE module_interface_init_output
664	MODULE PROCEDURE module_interface_init_output
665	END INTERFACE module_interface_init_output
666
667	INTERFACE module_interface_header
668	MODULE PROCEDURE module_interface_header
669	END INTERFACE module_interface_header
670
671	INTERFACE module_interface_actions
672	MODULE PROCEDURE module_interface_actions
673	MODULE PROCEDURE module_interface_actions_ij
674	END INTERFACE module_interface_actions
675
676	INTERFACE module_interface_non_advective_processes
677	MODULE PROCEDURE module_interface_non_advective_processes
678	MODULE PROCEDURE module_interface_non_advective_processes_ij
679	END INTERFACE module_interface_non_advective_processes
680
681	INTERFACE module_interface_exchange_horiz
682	MODULE PROCEDURE module_interface_exchange_horiz
683	END INTERFACE module_interface_exchange_horiz
684
685	INTERFACE module_interface_prognostic_equations
686	MODULE PROCEDURE module_interface_prognostic_equations
687	MODULE PROCEDURE module_interface_prognostic_equations_ij
688	END INTERFACE module_interface_prognostic_equations
689
690	INTERFACE module_interface_swap_timelevel
691	MODULE PROCEDURE module_interface_swap_timelevel
692	END INTERFACE module_interface_swap_timelevel
693
694	INTERFACE module_interface_boundary_conditions
695	MODULE PROCEDURE module_interface_boundary_conditions
696	END INTERFACE module_interface_boundary_conditions
697
698	INTERFACE module_interface_3d_data_averaging
699	MODULE PROCEDURE module_interface_3d_data_averaging
700	END INTERFACE module_interface_3d_data_averaging
701
702	INTERFACE module_interface_data_output_2d
703	MODULE PROCEDURE module_interface_data_output_2d
704	END INTERFACE module_interface_data_output_2d
705
706	INTERFACE module_interface_data_output_3d
707	MODULE PROCEDURE module_interface_data_output_3d
708	END INTERFACE module_interface_data_output_3d
709
710	INTERFACE module_interface_statistics
711	MODULE PROCEDURE module_interface_statistics
712	END INTERFACE module_interface_statistics
713
714	INTERFACE module_interface_rrd_global
715	MODULE PROCEDURE module_interface_rrd_global_ftn
716	MODULE PROCEDURE module_interface_rrd_global_mpi
717	END INTERFACE module_interface_rrd_global
718
719	INTERFACE module_interface_wrd_global
720	MODULE PROCEDURE module_interface_wrd_global
721	END INTERFACE module_interface_wrd_global
722
723	INTERFACE module_interface_rrd_local
724	MODULE PROCEDURE module_interface_rrd_local_ftn
725	MODULE PROCEDURE module_interface_rrd_local_mpi
726	END INTERFACE module_interface_rrd_local
727
728	INTERFACE module_interface_wrd_local
729	MODULE PROCEDURE module_interface_wrd_local
730	END INTERFACE module_interface_wrd_local
731
732	INTERFACE module_interface_last_actions
733	MODULE PROCEDURE module_interface_last_actions
734	END INTERFACE module_interface_last_actions
735
736
737	CONTAINS
738
739
740	!------------------------------------------------------------------------------!
741	! Description:
742	! ------------
743	!> Read module-specific parameter namelists
744	!------------------------------------------------------------------------------!
745	SUBROUTINE module_interface_parin
746
747
748	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
749
750	CALL dynamics_parin
751
752	CALL bio_parin
753	CALL bcm_parin
754	CALL chem_parin
755	CALL flight_parin ! ToDo: rename module to match filename
756	CALL gust_parin
757	CALL im_parin
758	CALL lpm_parin
759	CALL lsm_parin
760	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
761	CALL mas_parin
762	CALL nesting_offl_parin
763	CALL ocean_parin
764	CALL pcm_parin
765	CALL radiation_parin
766	CALL salsa_parin
767	CALL spectra_parin
768	CALL surface_data_output_parin
769	CALL stg_parin
770	CALL usm_parin
771	CALL vm_parin
772	CALL wtm_parin
773
774	CALL user_parin
775
776	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
777
778
779	END SUBROUTINE module_interface_parin
780
781
782	!------------------------------------------------------------------------------!
783	! Description:
784	! ------------
785	!> Perform module-specific initialization checks
786	!------------------------------------------------------------------------------!
787	SUBROUTINE module_interface_check_parameters
788
789
790	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
791
792	CALL dynamics_check_parameters
793	CALL tcm_check_parameters
794
795	IF ( bulk_cloud_model ) CALL bcm_check_parameters
796	IF ( air_chemistry ) CALL chem_check_parameters
797	IF ( gust_module_enabled ) CALL gust_check_parameters
798	IF ( indoor_model ) CALL im_check_parameters
799	IF ( particle_advection ) CALL lpm_check_parameters
800	IF ( land_surface ) CALL lsm_check_parameters
801	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
802	IF ( nesting_offline ) CALL nesting_offl_check_parameters
803	IF ( ocean_mode ) CALL ocean_check_parameters
804	IF ( plant_canopy ) CALL pcm_check_parameters
805	IF ( radiation ) CALL radiation_check_parameters
806	IF ( salsa ) CALL salsa_check_parameters
807	IF ( calculate_spectra ) CALL spectra_check_parameters
808	IF ( surface_output ) CALL surface_data_output_check_parameters
809	IF ( syn_turb_gen ) CALL stg_check_parameters
810	IF ( urban_surface ) CALL usm_check_parameters
811	IF ( virtual_measurement ) CALL vm_check_parameters
812	IF ( wind_turbine ) CALL wtm_check_parameters
813
814	IF ( user_module_enabled ) CALL user_check_parameters
815
816	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
817
818
819	END SUBROUTINE module_interface_check_parameters
820
821
822	!------------------------------------------------------------------------------!
823	! Description:
824	! ------------
825	!> Check module-specific data output of timeseries
826	!------------------------------------------------------------------------------!
827	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
828
829
830	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
831	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
832	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
833	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
834
835
836	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
837
838	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
839
840	IF ( radiation ) THEN
841	CALL radiation_check_data_output_ts( dots_max, dots_num )
842	ENDIF
843
844	IF ( user_module_enabled ) THEN
845	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
846	ENDIF
847
848	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
849
850
851	END SUBROUTINE module_interface_check_data_output_ts
852
853
854	!------------------------------------------------------------------------------!
855	! Description:
856	! ------------
857	!> Check module-specific data output of profiles
858	!------------------------------------------------------------------------------!
859	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
860	dopr_unit )
861
862
863	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
864	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
865	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
866	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
867
868
869	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
870
871	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
872
873	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
874	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
875	ENDIF
876
877	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
878	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
879	ENDIF
880
881	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
882	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
883	ENDIF
884
885	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
886	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
887	ENDIF
888
889	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
890	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
891	ENDIF
892
893	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
894	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
895	ENDIF
896
897	IF ( unit == 'illegal' .AND. radiation ) THEN
898	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
899	ENDIF
900
901	IF ( unit == 'illegal' .AND. salsa ) THEN
902	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
903	ENDIF
904
905	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
906	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
907	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
908	ENDIF
909
910	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
911
912
913	END SUBROUTINE module_interface_check_data_output_pr
914
915	!------------------------------------------------------------------------------!
916	! Description:
917	! ------------
918	!> Check module-specific 2D and 3D data output
919	!------------------------------------------------------------------------------!
920	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
921
922
923	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
924	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
925
926	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
927	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
928	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
929	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
930
931
932	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
933
934	CALL dynamics_check_data_output( variable, unit )
935
936	CALL tcm_check_data_output( variable, unit )
937
938	IF ( unit == 'illegal' .AND. biometeorology ) THEN
939	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
940	ENDIF
941
942	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
943	CALL bcm_check_data_output( variable, unit )
944	ENDIF
945
946	IF ( unit == 'illegal' .AND. air_chemistry &
947	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
948	CALL chem_check_data_output( variable, unit, i, ilen, k )
949	ENDIF
950
951	IF ( unit == 'illegal' ) THEN
952	CALL doq_check_data_output( variable, unit, i, ilen, k )
953	ENDIF
954
955	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
956	CALL gust_check_data_output( variable, unit )
957	ENDIF
958
959	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
960	CALL lsm_check_data_output( variable, unit, i, ilen, k )
961	ENDIF
962
963	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
964	CALL ocean_check_data_output( variable, unit )
965	ENDIF
966
967	IF ( unit == 'illegal' .AND. plant_canopy &
968	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
969	CALL pcm_check_data_output( variable, unit )
970	ENDIF
971
972	IF ( unit == 'illegal' .AND. radiation ) THEN
973	CALL radiation_check_data_output( variable, unit, i, ilen, k )
974	ENDIF
975
976	IF ( unit == 'illegal' .AND. salsa ) THEN
977	CALL salsa_check_data_output( variable, unit )
978	ENDIF
979
980	IF ( unit == 'illegal' .AND. indoor_model ) THEN
981	CALL im_check_data_output( variable, unit )
982	ENDIF
983
984	IF ( unit == 'illegal' .AND. urban_surface &
985	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
986	CALL usm_check_data_output( variable, unit )
987	ENDIF
988
989	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
990	unit = ''
991	CALL user_check_data_output( variable, unit )
992	ENDIF
993
994	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
995
996
997	END SUBROUTINE module_interface_check_data_output
998
999
1000	!------------------------------------------------------------------------------!
1001	!
1002	! Description:
1003	! ------------
1004	!> Interface for init_masks. ToDo: get rid of these redundant calls!
1005	!------------------------------------------------------------------------------!
1006	SUBROUTINE module_interface_init_masks( variable, unit )
1007
1008
1009	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1010	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
1011
1012
1013	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
1014
1015	CALL dynamics_init_masks( variable, unit )
1016
1017	IF ( unit == 'illegal' .AND. air_chemistry &
1018	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
1019	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
1020	ENDIF
1021
1022	IF ( unit == 'illegal' ) THEN
1023	CALL doq_check_data_output( variable, unit )
1024	ENDIF
1025
1026	IF ( unit == 'illegal' .AND. radiation ) THEN
1027	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
1028	ENDIF
1029
1030	IF ( unit == 'illegal' .AND. salsa ) THEN
1031	CALL salsa_check_data_output( variable, unit )
1032	ENDIF
1033
1034	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
1035	unit = ''
1036	CALL user_check_data_output( variable, unit )
1037	ENDIF
1038
1039	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
1040
1041
1042	END SUBROUTINE module_interface_init_masks
1043
1044
1045	!------------------------------------------------------------------------------!
1046	!
1047	! Description:
1048	! ------------
1049	!> Define appropriate grid for module-specific netcdf output variables.
1050	!------------------------------------------------------------------------------!
1051	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
1052	grid_x, grid_y, grid_z )
1053
1054
1055	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
1056	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
1057	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
1058	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
1059	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
1060
1061
1062	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
1063	!
1064	!-- As long as no action is done in this subroutine, initialize strings with
1065	!-- intent(out) attribute, in order to avoid compiler warnings.
1066	found = .FALSE.
1067	grid_x = 'none'
1068	grid_y = 'none'
1069	grid_z = 'none'
1070	!
1071	!-- Use var to avoid compiler warning about unused variable
1072	IF ( var == ' ' ) RETURN
1073
1074	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
1075
1076
1077	END SUBROUTINE module_interface_define_netcdf_grid
1078
1079
1080	!------------------------------------------------------------------------------!
1081	! Description:
1082	! ------------
1083	!> Allocate module-specific arrays and pointers
1084	!------------------------------------------------------------------------------!
1085	SUBROUTINE module_interface_init_arrays
1086
1087
1088	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
1089
1090	CALL dynamics_init_arrays
1091	CALL tcm_init_arrays
1092
1093	IF ( bulk_cloud_model ) CALL bcm_init_arrays
1094	IF ( air_chemistry ) CALL chem_init_arrays
1095	IF ( gust_module_enabled ) CALL gust_init_arrays
1096	IF ( particle_advection ) CALL lpm_init_arrays
1097	IF ( land_surface ) CALL lsm_init_arrays
1098	IF ( ocean_mode ) CALL ocean_init_arrays
1099	IF ( salsa ) CALL salsa_init_arrays
1100	IF ( urban_surface ) CALL usm_init_arrays
1101	IF ( surface_output ) CALL surface_data_output_init_arrays
1102	IF ( wind_turbine ) CALL wtm_init_arrays
1103
1104	IF ( user_module_enabled ) CALL user_init_arrays
1105
1106	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1107
1108
1109	END SUBROUTINE module_interface_init_arrays
1110
1111
1112	!------------------------------------------------------------------------------!
1113	! Description:
1114	! ------------
1115	!> Perform module-specific initialization
1116	!------------------------------------------------------------------------------!
1117	SUBROUTINE module_interface_init
1118
1119
1120	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1121
1122	CALL dynamics_init
1123	CALL tcm_init
1124
1125	IF ( biometeorology ) CALL bio_init
1126	IF ( bulk_cloud_model ) CALL bcm_init
1127	IF ( air_chemistry ) CALL chem_init
1128	IF ( virtual_flight ) CALL flight_init
1129	IF ( gust_module_enabled ) CALL gust_init
1130	IF ( indoor_model ) CALL im_init
1131	IF ( particle_advection ) CALL lpm_init
1132	IF ( large_scale_forcing ) CALL lsf_init
1133	IF ( land_surface ) CALL lsm_init
1134	IF ( nudging ) CALL nudge_init
1135	IF ( ocean_mode ) CALL ocean_init
1136	IF ( plant_canopy ) CALL pcm_init
1137	IF ( salsa ) CALL salsa_init
1138	IF ( urban_surface ) CALL usm_init
1139	IF ( virtual_measurement ) CALL vm_init
1140	IF ( wind_turbine ) CALL wtm_init
1141	IF ( radiation ) CALL radiation_init
1142
1143	CALL doq_init
1144
1145	IF ( user_module_enabled ) CALL user_init
1146
1147	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1148
1149	END SUBROUTINE module_interface_init
1150
1151	!------------------------------------------------------------------------------!
1152	! Description:
1153	! ------------
1154	!> Initialize boundary conditions and numerical schemes.
1155	!------------------------------------------------------------------------------!
1156	SUBROUTINE module_interface_init_numerics
1157
1158	!
1159	!-- Initialize boundary conditions via surface type
1160	CALL init_bc
1161	!
1162	!-- Calculate wall flag arrays for the multigrid method.
1163	!-- Please note, wall flags are only applied in the non-optimized version.
1164	CALL poismg_noopt_init
1165
1166	END SUBROUTINE module_interface_init_numerics
1167
1168
1169	!------------------------------------------------------------------------------!
1170	! Description:
1171	! ------------
1172	!> Initialize data output
1173	!------------------------------------------------------------------------------!
1174	SUBROUTINE module_interface_init_output
1175
1176	INTEGER(iwp) :: return_value !< returned status value of called function
1177
1178	!
1179	!-- Initialize data-output module
1180	CALL dom_init( file_suffix_of_output_group=coupling_char, &
1181	mpi_comm_of_output_group=comm2d, &
1182	program_debug_output_unit=9, &
1183	debug_output=debug_output )
1184	!
1185	!-- Define module-specific output quantities
1186	IF ( virtual_measurement ) CALL vm_init_output
1187	IF ( wind_turbine ) CALL wtm_init_output
1188	!
1189	!-- Leave output-definition state
1190	return_value = dom_def_end()
1191
1192	END SUBROUTINE module_interface_init_output
1193
1194	!------------------------------------------------------------------------------!
1195	! Description:
1196	! ------------
1197	!> Perform module-specific post-initialization checks
1198	!------------------------------------------------------------------------------!
1199	SUBROUTINE module_interface_init_checks
1200
1201
1202	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1203
1204	CALL dynamics_init_checks
1205
1206	IF ( biometeorology ) CALL bio_init_checks
1207
1208	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1209
1210
1211	END SUBROUTINE module_interface_init_checks
1212
1213
1214	!------------------------------------------------------------------------------!
1215	! Description:
1216	! ------------
1217	!> Gather module-specific header output
1218	!------------------------------------------------------------------------------!
1219	SUBROUTINE module_interface_header( io )
1220
1221
1222	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1223
1224
1225	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1226
1227	CALL dynamics_header( io )
1228
1229	IF ( biometeorology ) CALL bio_header ( io )
1230	IF ( bulk_cloud_model ) CALL bcm_header( io )
1231	IF ( air_chemistry ) CALL chem_header ( io )
1232	IF ( virtual_flight ) CALL flight_header( io )
1233	IF ( gust_module_enabled ) CALL gust_header( io )
1234	IF ( particle_advection ) CALL lpm_header( io )
1235	IF ( land_surface ) CALL lsm_header( io )
1236	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1237	IF ( nesting_offline ) CALL nesting_offl_header( io )
1238	IF ( ocean_mode ) CALL ocean_header( io )
1239	IF ( plant_canopy ) CALL pcm_header( io )
1240	IF ( radiation ) CALL radiation_header( io )
1241	IF ( salsa ) CALL salsa_header( io )
1242	IF ( calculate_spectra ) CALL spectra_header( io )
1243	IF ( syn_turb_gen ) CALL stg_header( io )
1244
1245	IF ( user_module_enabled ) CALL user_header( io )
1246
1247	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1248
1249
1250	END SUBROUTINE module_interface_header
1251
1252
1253	!------------------------------------------------------------------------------!
1254	! Description:
1255	! ------------
1256	!> Perform module-specific actions while in time-integration (vector-optimized)
1257	!------------------------------------------------------------------------------!
1258	SUBROUTINE module_interface_actions( location )
1259
1260
1261	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1262
1263	CALL dynamics_actions( location )
1264	CALL tcm_actions( location )
1265
1266	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1267	IF ( air_chemistry ) CALL chem_actions( location )
1268	IF ( gust_module_enabled ) CALL gust_actions( location )
1269	IF ( particle_advection ) CALL lpm_actions( location )
1270	IF ( ocean_mode ) CALL ocean_actions( location )
1271	IF ( salsa ) CALL salsa_actions( location )
1272	IF ( wind_turbine ) CALL wtm_actions( location )
1273
1274	IF ( user_module_enabled ) CALL user_actions( location )
1275	IF ( vdi_checks ) CALL vdi_actions( location )
1276
1277
1278	END SUBROUTINE module_interface_actions
1279
1280
1281	!------------------------------------------------------------------------------!
1282	! Description:
1283	! ------------
1284	!> Perform module-specific actions while in time-integration (cache-optimized)
1285	!------------------------------------------------------------------------------!
1286	SUBROUTINE module_interface_actions_ij( i, j, location )
1287
1288
1289	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1290	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1291	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1292
1293	CALL dynamics_actions( i, j, location )
1294	CALL tcm_actions( i, j, location )
1295
1296	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1297	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1298	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1299	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1300	IF ( salsa ) CALL salsa_actions( i, j, location )
1301	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1302
1303	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1304
1305
1306	END SUBROUTINE module_interface_actions_ij
1307
1308
1309	!------------------------------------------------------------------------------!
1310	! Description:
1311	! ------------
1312	!> Compute module-specific non_advective_processes (vector-optimized)
1313	!------------------------------------------------------------------------------!
1314	SUBROUTINE module_interface_non_advective_processes
1315
1316
1317	CALL dynamics_non_advective_processes
1318
1319	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1320	IF ( air_chemistry ) CALL chem_non_advective_processes
1321	IF ( salsa ) CALL salsa_non_advective_processes
1322
1323
1324	END SUBROUTINE module_interface_non_advective_processes
1325
1326
1327	!------------------------------------------------------------------------------!
1328	! Description:
1329	! ------------
1330	!> Compute module-specific non_advective_processes (cache-optimized)
1331	!------------------------------------------------------------------------------!
1332	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1333
1334
1335	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1336	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1337
1338	CALL dynamics_non_advective_processes( i, j )
1339
1340	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1341	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1342	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1343
1344
1345	END SUBROUTINE module_interface_non_advective_processes_ij
1346
1347	!------------------------------------------------------------------------------!
1348	! Description:
1349	! ------------
1350	!> Exchange horiz for module-specific quantities
1351	!------------------------------------------------------------------------------!
1352	SUBROUTINE module_interface_exchange_horiz
1353
1354
1355	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1356
1357	CALL dynamics_exchange_horiz
1358
1359	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1360	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1361	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1362
1363	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1364
1365
1366	END SUBROUTINE module_interface_exchange_horiz
1367
1368
1369	!------------------------------------------------------------------------------!
1370	! Description:
1371	! ------------
1372	!> Compute module-specific prognostic_equations (vector-optimized)
1373	!------------------------------------------------------------------------------!
1374	SUBROUTINE module_interface_prognostic_equations
1375
1376
1377	CALL dynamics_prognostic_equations
1378	CALL tcm_prognostic_equations
1379
1380	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1381	IF ( air_chemistry ) CALL chem_prognostic_equations
1382	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1383	IF ( ocean_mode ) CALL ocean_prognostic_equations
1384	IF ( salsa ) CALL salsa_prognostic_equations
1385
1386
1387	END SUBROUTINE module_interface_prognostic_equations
1388
1389
1390	!------------------------------------------------------------------------------!
1391	! Description:
1392	! ------------
1393	!> Compute module-specific prognostic_equations (cache-optimized)
1394	!------------------------------------------------------------------------------!
1395	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1396
1397
1398	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1399	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1400	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1401	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1402
1403	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1404	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1405
1406	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1407	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1408	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1409	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1410	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1411
1412
1413	END SUBROUTINE module_interface_prognostic_equations_ij
1414
1415	!------------------------------------------------------------------------------!
1416	! Description:
1417	! ------------
1418	!> Compute module-specific boundary conditions
1419	!------------------------------------------------------------------------------!
1420	SUBROUTINE module_interface_boundary_conditions
1421
1422
1423	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
1424
1425	CALL dynamics_boundary_conditions
1426	CALL tcm_boundary_conds
1427
1428	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
1429	IF ( air_chemistry ) CALL chem_boundary_conditions
1430	IF ( ocean_mode ) CALL ocean_boundary_conditions
1431	IF ( salsa ) CALL salsa_boundary_conditions
1432
1433	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
1434
1435
1436	END SUBROUTINE module_interface_boundary_conditions
1437
1438	!------------------------------------------------------------------------------!
1439	! Description:
1440	! ------------
1441	!> Swap the timelevel pointers for module-specific arrays
1442	!------------------------------------------------------------------------------!
1443	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1444
1445
1446	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1447
1448
1449	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1450
1451	CALL dynamics_swap_timelevel( swap_mode )
1452	CALL tcm_swap_timelevel( swap_mode )
1453
1454	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1455	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1456	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1457	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1458	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1459	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1460	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1461
1462	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1463
1464
1465	END SUBROUTINE module_interface_swap_timelevel
1466
1467
1468	!------------------------------------------------------------------------------!
1469	!
1470	! Description:
1471	! ------------
1472	!> Perform module-specific averaging of 3D data
1473	!------------------------------------------------------------------------------!
1474	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1475
1476
1477	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1478	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1479
1480
1481	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1482
1483	CALL dynamics_3d_data_averaging( mode, variable )
1484	CALL tcm_3d_data_averaging( mode, variable )
1485
1486	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1487	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1488	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1489	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1490	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1491	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1492	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1493	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1494	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1495	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1496	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1497
1498	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1499
1500	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1501
1502
1503	END SUBROUTINE module_interface_3d_data_averaging
1504
1505	!------------------------------------------------------------------------------!
1506	!
1507	! Description:
1508	! ------------
1509	!> Define module-specific 2D output variables
1510	!------------------------------------------------------------------------------!
1511	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1512	local_pf, two_d, nzb_do, nzt_do, &
1513	fill_value )
1514
1515	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1516	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1517	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1518	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1519	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1520	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1521	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1522	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1523	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1524
1525	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1526
1527
1528	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1529
1530	CALL dynamics_data_output_2d( &
1531	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1532	)
1533
1534	IF ( .NOT. found ) THEN
1535	CALL tcm_data_output_2d( &
1536	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1537	)
1538	ENDIF
1539
1540	IF ( .NOT. found .AND. biometeorology ) THEN
1541	CALL bio_data_output_2d( &
1542	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1543	)
1544	ENDIF
1545
1546	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1547	CALL bcm_data_output_2d( &
1548	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1549	)
1550	ENDIF
1551
1552	IF ( .NOT. found .AND. air_chemistry ) THEN
1553	CALL chem_data_output_2d( &
1554	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1555	)
1556	ENDIF
1557
1558	IF ( .NOT. found ) THEN
1559	CALL doq_output_2d( &
1560	av, variable, found, grid, mode, local_pf, two_d, &
1561	nzb_do, nzt_do, fill_value )
1562	ENDIF
1563
1564	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1565	CALL gust_data_output_2d( &
1566	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1567	)
1568	ENDIF
1569
1570	IF ( .NOT. found .AND. land_surface ) THEN
1571	CALL lsm_data_output_2d( &
1572	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1573	)
1574	ENDIF
1575
1576	IF ( .NOT. found .AND. ocean_mode ) THEN
1577	CALL ocean_data_output_2d( &
1578	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1579	)
1580	ENDIF
1581
1582	IF ( .NOT. found .AND. radiation ) THEN
1583	CALL radiation_data_output_2d( &
1584	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1585	)
1586	ENDIF
1587
1588	IF ( .NOT. found .AND. salsa ) THEN
1589	CALL salsa_data_output_2d( &
1590	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1591	)
1592	ENDIF
1593
1594	IF ( .NOT. found .AND. user_module_enabled ) THEN
1595	CALL user_data_output_2d( &
1596	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1597	)
1598	ENDIF
1599
1600	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1601
1602
1603	END SUBROUTINE module_interface_data_output_2d
1604
1605
1606	!------------------------------------------------------------------------------!
1607	!
1608	! Description:
1609	! ------------
1610	!> Define module-specific 3D output variables
1611	!------------------------------------------------------------------------------!
1612	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1613	fill_value, resorted, nzb_do, nzt_do )
1614
1615
1616	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1617	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1618	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1619	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1620	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1621	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1622	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1623
1624	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1625
1626
1627	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1628
1629	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1630	resorted = .FALSE.
1631
1632	IF ( .NOT. found ) THEN
1633	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1634	resorted = .TRUE.
1635	ENDIF
1636
1637	IF ( .NOT. found .AND. biometeorology ) THEN
1638	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1639	resorted = .FALSE.
1640	ENDIF
1641
1642	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1643	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1644	resorted = .TRUE.
1645	ENDIF
1646
1647	IF ( .NOT. found .AND. air_chemistry ) THEN
1648	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1649	resorted = .TRUE.
1650	ENDIF
1651
1652	IF ( .NOT. found ) THEN
1653	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1654	resorted = .TRUE.
1655	ENDIF
1656
1657	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1658	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1659	resorted = .TRUE.
1660	ENDIF
1661
1662	IF ( .NOT. found .AND. indoor_model ) THEN
1663	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1664	resorted = .TRUE.
1665	ENDIF
1666
1667	IF ( .NOT. found .AND. ocean_mode ) THEN
1668	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1669	resorted = .TRUE.
1670	ENDIF
1671
1672	IF ( .NOT. found .AND. plant_canopy ) THEN
1673	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1674	resorted = .TRUE.
1675	ENDIF
1676
1677	IF ( .NOT. found .AND. radiation ) THEN
1678	CALL radiation_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1679	resorted = .TRUE.
1680	ENDIF
1681
1682	IF ( .NOT. found .AND. salsa ) THEN
1683	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1684	resorted = .TRUE.
1685	ENDIF
1686
1687	IF ( .NOT. found .AND. user_module_enabled ) THEN
1688	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1689	resorted = .TRUE.
1690	ENDIF
1691
1692	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1693
1694
1695	END SUBROUTINE module_interface_data_output_3d
1696
1697
1698	!------------------------------------------------------------------------------!
1699	! Description:
1700	! ------------
1701	!> Compute module-specific profile and timeseries data
1702	!------------------------------------------------------------------------------!
1703	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1704
1705
1706	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1707	INTEGER(iwp), INTENT(IN) :: sr !<
1708	INTEGER(iwp), INTENT(IN) :: tn !<
1709	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1710
1711
1712	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1713
1714	CALL dynamics_statistics( mode, sr, tn )
1715
1716	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1717	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1718	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1719
1720	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1721
1722	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1723
1724
1725	END SUBROUTINE module_interface_statistics
1726
1727
1728	!--------------------------------------------------------------------------------------------------!
1729	! Description:
1730	! ------------
1731	!> Read module-specific restart data in Fortran binary format globaly shared by all MPI ranks
1732	!--------------------------------------------------------------------------------------------------!
1733	SUBROUTINE module_interface_rrd_global_ftn( found )
1734
1735
1736	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1737
1738
1739	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1740
1741	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1742
1743	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1744	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1745	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1746	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1747	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1748	IF ( .NOT. found ) CALL pcm_rrd_global( found )
1749	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1750	IF ( .NOT. found ) CALL salsa_rrd_global( found )
1751	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1752	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1753	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1754
1755	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1756
1757	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1758
1759
1760	END SUBROUTINE module_interface_rrd_global_ftn
1761
1762
1763	!--------------------------------------------------------------------------------------------------!
1764	! Description:
1765	! ------------
1766	!> Read module-specific restart data in MPI format globaly shared by all MPI ranks
1767	!--------------------------------------------------------------------------------------------------!
1768	SUBROUTINE module_interface_rrd_global_mpi
1769
1770
1771	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1772
1773	CALL dynamics_rrd_global
1774
1775	IF ( biometeorology ) CALL bio_rrd_global
1776	IF ( bulk_cloud_model ) CALL bcm_rrd_global
1777	IF ( virtual_flight ) CALL flight_rrd_global
1778	IF ( gust_module_enabled ) CALL gust_rrd_global
1779	IF ( particle_advection ) CALL lpm_rrd_global
1780	IF ( plant_canopy ) CALL pcm_rrd_global
1781	IF ( ocean_mode ) CALL ocean_rrd_global
1782	IF ( salsa ) CALL salsa_rrd_global
1783	IF ( syn_turb_gen ) CALL stg_rrd_global
1784	IF ( wind_turbine ) CALL wtm_rrd_global
1785	IF ( surface_output ) CALL surface_data_output_rrd_global
1786
1787	IF ( user_module_enabled ) CALL user_rrd_global
1788
1789	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1790
1791
1792	END SUBROUTINE module_interface_rrd_global_mpi
1793
1794
1795	!------------------------------------------------------------------------------!
1796	! Description:
1797	! ------------
1798	!> Write module-specific restart data globaly shared by all MPI ranks
1799	!------------------------------------------------------------------------------!
1800	SUBROUTINE module_interface_wrd_global
1801
1802
1803	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1804
1805	CALL dynamics_wrd_global
1806
1807	IF ( biometeorology ) CALL bio_wrd_global
1808	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1809	IF ( virtual_flight ) CALL flight_wrd_global
1810	IF ( gust_module_enabled ) CALL gust_wrd_global
1811	IF ( particle_advection ) CALL lpm_wrd_global
1812	IF ( plant_canopy ) CALL pcm_wrd_global
1813	IF ( ocean_mode ) CALL ocean_wrd_global
1814	IF ( salsa ) CALL salsa_wrd_global
1815	IF ( syn_turb_gen ) CALL stg_wrd_global
1816	IF ( wind_turbine ) CALL wtm_wrd_global
1817	IF ( surface_output ) CALL surface_data_output_wrd_global
1818
1819	IF ( user_module_enabled ) CALL user_wrd_global
1820
1821	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1822
1823
1824	END SUBROUTINE module_interface_wrd_global
1825
1826
1827	!------------------------------------------------------------------------------!
1828	! Description:
1829	! ------------
1830	!> Read module-specific local restart data arrays (Fortran binary format).
1831	!------------------------------------------------------------------------------!
1832	SUBROUTINE module_interface_rrd_local_ftn( map_index, &
1833	nxlf, nxlc, nxl_on_file, &
1834	nxrf, nxrc, nxr_on_file, &
1835	nynf, nync, nyn_on_file, &
1836	nysf, nysc, nys_on_file, &
1837	tmp_2d, tmp_3d, found )
1838
1839
1840	INTEGER(iwp), INTENT(IN) :: map_index !<
1841	INTEGER(iwp), INTENT(IN) :: nxlc !<
1842	INTEGER(iwp), INTENT(IN) :: nxlf !<
1843	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1844	INTEGER(iwp), INTENT(IN) :: nxrc !<
1845	INTEGER(iwp), INTENT(IN) :: nxrf !<
1846	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1847	INTEGER(iwp), INTENT(IN) :: nync !<
1848	INTEGER(iwp), INTENT(IN) :: nynf !<
1849	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1850	INTEGER(iwp), INTENT(IN) :: nysc !<
1851	INTEGER(iwp), INTENT(IN) :: nysf !<
1852	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1853	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1854
1855	REAL(wp), &
1856	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1857	INTENT(OUT) :: tmp_2d !<
1858	REAL(wp), &
1859	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1860	INTENT(OUT) :: tmp_3d !<
1861
1862
1863	IF ( debug_output ) THEN
1864	CALL debug_message( 'module-specific read local restart data (Fortran binary)', 'start' )
1865	ENDIF
1866
1867	CALL dynamics_rrd_local( &
1868	map_index, &
1869	nxlf, nxlc, nxl_on_file, &
1870	nxrf, nxrc, nxr_on_file, &
1871	nynf, nync, nyn_on_file, &
1872	nysf, nysc, nys_on_file, &
1873	tmp_2d, tmp_3d, found &
1874	) ! ToDo: change interface to pass variable
1875
1876	IF ( .NOT. found ) CALL bio_rrd_local( &
1877	found &
1878	)
1879
1880	IF ( .NOT. found ) CALL bcm_rrd_local( &
1881	map_index, &
1882	nxlf, nxlc, nxl_on_file, &
1883	nxrf, nxrc, nxr_on_file, &
1884	nynf, nync, nyn_on_file, &
1885	nysf, nysc, nys_on_file, &
1886	tmp_2d, tmp_3d, found &
1887	) ! ToDo: change interface to pass variable
1888
1889	IF ( .NOT. found ) CALL chem_rrd_local( &
1890	map_index, &
1891	nxlf, nxlc, nxl_on_file, &
1892	nxrf, nxrc, nxr_on_file, &
1893	nynf, nync, nyn_on_file, &
1894	nysf, nysc, nys_on_file, &
1895	tmp_3d, found &
1896	) ! ToDo: change interface to pass variable
1897
1898	IF ( .NOT. found ) CALL doq_rrd_local( &
1899	map_index, &
1900	nxlf, nxlc, nxl_on_file, &
1901	nxrf, nxrc, nxr_on_file, &
1902	nynf, nync, nyn_on_file, &
1903	nysf, nysc, nys_on_file, &
1904	tmp_2d, tmp_3d, found &
1905	) ! ToDo: change interface to pass variable
1906
1907	IF ( .NOT. found ) CALL gust_rrd_local( &
1908	map_index, &
1909	nxlf, nxlc, nxl_on_file, &
1910	nxrf, nxrc, nxr_on_file, &
1911	nynf, nync, nyn_on_file, &
1912	nysf, nysc, nys_on_file, &
1913	tmp_2d, tmp_3d, found &
1914	) ! ToDo: change interface to pass variable
1915
1916	IF ( .NOT. found ) CALL lpm_rrd_local( &
1917	map_index, &
1918	nxlf, nxlc, nxl_on_file, &
1919	nxrf, nxrc, nxr_on_file, &
1920	nynf, nync, nyn_on_file, &
1921	nysf, nysc, nys_on_file, &
1922	tmp_3d, found &
1923	) ! ToDo: change interface to pass variable
1924
1925	IF ( .NOT. found ) CALL lsm_rrd_local( &
1926	map_index, &
1927	nxlf, nxlc, nxl_on_file, &
1928	nxrf, nxrc, nxr_on_file, &
1929	nynf, nync, nyn_on_file, &
1930	nysf, nysc, nys_on_file, &
1931	tmp_2d, found &
1932	) ! ToDo: change interface to pass variable
1933
1934	IF ( .NOT. found ) CALL pcm_rrd_local( &
1935	map_index, &
1936	nxlf, nxlc, nxl_on_file, &
1937	nxrf, nxrc, nxr_on_file, &
1938	nynf, nync, nyn_on_file, &
1939	nysf, nysc, nys_on_file, &
1940	found &
1941	)
1942
1943	IF ( .NOT. found ) CALL ocean_rrd_local( &
1944	map_index, &
1945	nxlf, nxlc, nxl_on_file, &
1946	nxrf, nxrc, nxr_on_file, &
1947	nynf, nync, nyn_on_file, &
1948	nysf, nysc, nys_on_file, &
1949	tmp_3d, found &
1950	) ! ToDo: change interface to pass variable
1951
1952	IF ( .NOT. found ) CALL radiation_rrd_local( &
1953	map_index, &
1954	nxlf, nxlc, nxl_on_file, &
1955	nxrf, nxrc, nxr_on_file, &
1956	nynf, nync, nyn_on_file, &
1957	nysf, nysc, nys_on_file, &
1958	tmp_2d, tmp_3d, found &
1959	) ! ToDo: change interface to pass variable
1960
1961	IF ( .NOT. found ) CALL salsa_rrd_local( &
1962	map_index, &
1963	nxlf, nxlc, nxl_on_file, &
1964	nxrf, nxrc, nxr_on_file, &
1965	nynf, nync, nyn_on_file, &
1966	nysf, nysc, nys_on_file, &
1967	tmp_3d, found &
1968	) ! ToDo: change interface to pass variable
1969
1970	IF ( .NOT. found ) CALL usm_rrd_local( &
1971	map_index, &
1972	nxlf, nxlc, nxl_on_file, &
1973	nxrf, nxr_on_file, &
1974	nynf, nyn_on_file, &
1975	nysf, nysc, nys_on_file, &
1976	found &
1977	) ! ToDo: change interface to pass variable
1978	!
1979	!-- Surface data do not need overlap data, so do not pass these information.
1980	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1981
1982	IF ( .NOT. found ) CALL user_rrd_local( &
1983	map_index, &
1984	nxlf, nxlc, nxl_on_file, &
1985	nxrf, nxrc, nxr_on_file, &
1986	nynf, nync, nyn_on_file, &
1987	nysf, nysc, nys_on_file, &
1988	tmp_3d, found &
1989	) ! ToDo: change interface to pass variable
1990
1991	IF ( debug_output ) THEN
1992	CALL debug_message( 'module-specific read local restart data (Fortran binary)', 'end' )
1993	ENDIF
1994
1995	END SUBROUTINE module_interface_rrd_local_ftn
1996
1997
1998	!------------------------------------------------------------------------------!
1999	! Description:
2000	! ------------
2001	!> Read module-specific local restart data arrays (MPI-IO).
2002	!------------------------------------------------------------------------------!
2003	SUBROUTINE module_interface_rrd_local_mpi
2004
2005	IF ( debug_output ) THEN
2006	CALL debug_message( 'module-specific read local restart data (MPI-IO)', 'start' )
2007	ENDIF
2008
2009	CALL dynamics_rrd_local
2010
2011	IF ( biometeorology ) CALL bio_rrd_local
2012	IF ( bulk_cloud_model ) CALL bcm_rrd_local
2013	IF ( air_chemistry ) CALL chem_rrd_local
2014	CALL doq_rrd_local
2015	IF ( gust_module_enabled ) CALL gust_rrd_local
2016	IF ( particle_advection ) CALL lpm_rrd_local
2017	IF ( land_surface ) CALL lsm_rrd_local
2018	IF ( plant_canopy ) CALL pcm_rrd_local
2019	IF ( ocean_mode ) CALL ocean_rrd_local
2020	IF ( radiation ) CALL radiation_rrd_local
2021	IF ( salsa ) CALL salsa_rrd_local
2022	IF ( urban_surface ) CALL usm_rrd_local
2023	IF ( surface_output ) CALL surface_data_output_rrd_local
2024
2025	IF ( user_module_enabled ) CALL user_rrd_local
2026
2027	IF ( debug_output ) THEN
2028	CALL debug_message( 'module-specific read local restart data (Fortran binary)', 'end' )
2029	ENDIF
2030
2031	END SUBROUTINE module_interface_rrd_local_mpi
2032
2033
2034	!------------------------------------------------------------------------------!
2035	! Description:
2036	! ------------
2037	!> Write module-specific restart data specific to local MPI ranks
2038	!------------------------------------------------------------------------------!
2039	SUBROUTINE module_interface_wrd_local
2040
2041
2042	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
2043
2044	CALL dynamics_wrd_local
2045
2046	IF ( biometeorology ) CALL bio_wrd_local
2047	IF ( bulk_cloud_model ) CALL bcm_wrd_local
2048	IF ( air_chemistry ) CALL chem_wrd_local
2049	CALL doq_wrd_local
2050	IF ( gust_module_enabled ) CALL gust_wrd_local
2051	IF ( particle_advection ) CALL lpm_wrd_local
2052	IF ( land_surface ) CALL lsm_wrd_local
2053	IF ( plant_canopy ) CALL pcm_wrd_local
2054	IF ( ocean_mode ) CALL ocean_wrd_local
2055	IF ( radiation ) CALL radiation_wrd_local
2056	IF ( salsa ) CALL salsa_wrd_local
2057	IF ( urban_surface ) CALL usm_wrd_local
2058	IF ( surface_output ) CALL surface_data_output_wrd_local
2059
2060	IF ( user_module_enabled ) CALL user_wrd_local
2061
2062	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
2063
2064
2065	END SUBROUTINE module_interface_wrd_local
2066
2067
2068	!------------------------------------------------------------------------------!
2069	! Description:
2070	! ------------
2071	!> Perform module-specific last actions before the program terminates
2072	!------------------------------------------------------------------------------!
2073	SUBROUTINE module_interface_last_actions
2074
2075	INTEGER :: return_value !< returned status value of a called function
2076
2077
2078	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
2079
2080	return_value = dom_finalize_output()
2081
2082	CALL dynamics_last_actions
2083
2084	IF ( user_module_enabled ) CALL user_last_actions
2085
2086	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
2087
2088
2089	END SUBROUTINE module_interface_last_actions
2090
2091
2092	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |