Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4329

Last change on this file since 4329 was 4281, checked in by schwenkel, 5 years ago
Moved boundary_conds to dynamics module
Property svn:keywords set to `Id`
File size: 84.3 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4281 2019-10-29 15:15:39Z motisi $
27	! Added dynamics boundary conditions
28	!
29	! 4272 2019-10-23 15:18:57Z schwenkel
30	! Further modularization of boundary conditions: moved boundary conditions to
31	! respective modules
32	!
33	! 4268 2019-10-17 11:29:38Z schwenkel
34	! Introduction of module_interface_boundary_conditions
35	!
36	! 4182 2019-08-22 15:20:23Z scharf
37	! Corrected "Former revisions" section
38	!
39	! 4173 2019-08-20 12:04:06Z gronemeier
40	! add vdi_internal_controls
41	!
42	! 4157 2019-08-14 09:19:12Z suehring
43	! Call doq_init from module interface
44	!
45	! 4132 2019-08-02 12:34:17Z suehring
46	! Bugfix in masked data output for diagnostic quantities
47	!
48	! 4131 2019-08-02 11:06:18Z monakurppa
49	! Add output of 3D plant-canopy outputs (merge from branch resler)
50	!
51	! 4048 2019-06-21 21:00:21Z knoop
52	! Moved turbulence_closure_mod calls into this module_interface
53	!
54	! 4047 2019-06-21 18:58:09Z knoop
55	! Introduction of the dynamics module
56	!
57	! 4039 2019-06-18 10:32:41Z suehring
58	! Introduce diagnostic output
59	!
60	! 4028 2019-06-13 12:21:37Z schwenkel
61	! Further modularization of particle code components
62	!
63	! 4017 2019-06-06 12:16:46Z schwenkel
64	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
65	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
66	! are not defined everywhere, e.g. land-surface outputs, this will be
67	! problematic as NaN will be output.
68	!
69	! 3987 2019-05-22 09:52:13Z kanani
70	! Introduce switchable DEBUG file output via debug_message routine
71	!
72	! 3956 2019-05-07 12:32:52Z monakurppa
73	! - Added calls for salsa_non_advective_processes and
74	! salsa_exchange_horiz_bounds
75	! - Moved the call for salsa_data_output_2d/3d before that of
76	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
77	! salsa output variable and encounters a segmentation fault for "Ntot" due
78	! to the shortoutput name
79	!
80	! 3931 2019-04-24 16:34:28Z schwenkel
81	! Changed non_transport_physics to non_advective_processes
82	!
83	! 3930 2019-04-24 14:57:18Z forkel
84	! Correct/complete module_interface introduction for chemistry model
85	!
86	! 3887 2019 -04-12 08:47:41Z schwenkel
87	! Changes related to global restructuring of location messages and introduction
88	! of additional debug messages
89	!
90	! 3880 2019 -04-08 21:43:02Z knoop
91	! Add a call for salsa_prognostic_equations
92	!
93	! 3840 2019-03-29 10:35:52Z knoop
94	! bugfix: intent of dummy arguments changed to inout
95	!
96	! 3770 2019-02-28 11:22:32Z moh.hefny
97	! removed unused variables in module_interface_check_data_output_ts
98	!
99	! 3767 08:18:02Z raasch
100	! unused variable file_index removed from subroutine parameter list
101	!
102	! 3766 2019-02-26 16:23:41Z raasch
103	! first argument removed from module_interface_rrd_*, statement added to avoid
104	! compiler warning about unused variable, file reformatted with respect to coding
105	! standards
106	!
107	! 3762 2019-02-25 16:54:16Z suehring
108	! only pass required arguments to surface_data_output_rrd_local
109	!
110	! 3747 2019-02-16 15:15:23Z gronemeier
111	! Call user_init_arrays
112	!
113	! 3745 2019-02-15 18:57:56Z suehring
114	! Add indoor model
115	!
116	! 3744 2019-02-15 18:38:58Z suehring
117	! Removed bio_check_parameters as the method is empty.
118	!
119	! 3735 2019-02-12 09:52:40Z dom_dwd_user
120	! Accepting variable j from check_parameters and passing it to
121	! bio_check_data_output
122	! Add required restart data for surface output module
123	!
124	! 3731 2019-02-11 13:06:27Z suehring
125	! Add check_parameters routine for virtual measurements
126	!
127	! 3711 2019-01-31 13:44:26Z knoop
128	! Introduced module_interface_init_checks for post-init checks
129	!
130	! 3705 2019-01-29 19:56:39Z suehring
131	! Add last_actions for virtual measurements
132	!
133	! 3704 2019-01-29 19:51:41Z suehring
134	! Some interface calls moved to module_interface + cleanup
135	!
136	! 3684 2019-01-20 20:20:58Z knoop
137	! Bugfix: made unit intend INOUT
138	!
139	! 3650 2019-01-04 13:01:33Z kanani
140	! Add restart routines for biometeorology
141	!
142	! 3649 2019-01-02 16:52:21Z suehring
143	! Initialize strings, in order to avoid compiler warnings for non-initialized
144	! characters with intent(out) attribute
145	!
146	! 3648 2019-01-02 16:35:46Z suehring
147	! 3641 2018-12-23 22:10:01Z knoop
148	! Initial implementation of the PALM module interface
149	!
150	!
151	! Description:
152	! ------------
153	!> This is the interface between the PALM model core and all its modules.
154	!>
155	!> @todo Re-format module to be consistent with coding standard
156	!------------------------------------------------------------------------------!
157	MODULE module_interface
158
159	USE indices, &
160	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
161
162	USE kinds
163
164	!
165	!-- load module-specific control parameters.
166	!-- ToDo: move all of them to respective module or a dedicated central module
167
168	USE dynamics_mod, &
169	ONLY: dynamics_parin, &
170	dynamics_check_parameters, &
171	dynamics_check_data_output_ts, &
172	dynamics_check_data_output_pr, &
173	dynamics_check_data_output, &
174	dynamics_init_masks, &
175	dynamics_define_netcdf_grid, &
176	dynamics_init_arrays, &
177	dynamics_init, &
178	dynamics_init_checks, &
179	dynamics_header, &
180	dynamics_actions, &
181	dynamics_non_advective_processes, &
182	dynamics_exchange_horiz, &
183	dynamics_prognostic_equations, &
184	dynamics_boundary_conditions, &
185	dynamics_swap_timelevel, &
186	dynamics_3d_data_averaging, &
187	dynamics_data_output_2d, &
188	dynamics_data_output_3d, &
189	dynamics_statistics, &
190	dynamics_rrd_global, &
191	dynamics_rrd_local, &
192	dynamics_wrd_global, &
193	dynamics_wrd_local, &
194	dynamics_last_actions
195
196	USE turbulence_closure_mod, &
197	ONLY: tcm_check_parameters, &
198	tcm_check_data_output, &
199	tcm_init_arrays, &
200	tcm_init, &
201	tcm_actions, &
202	tcm_prognostic_equations, &
203	tcm_boundary_conds, &
204	tcm_swap_timelevel, &
205	tcm_3d_data_averaging, &
206	tcm_data_output_2d, &
207	tcm_data_output_3d
208
209	USE control_parameters, &
210	ONLY: air_chemistry, &
211	biometeorology, &
212	debug_output, &
213	debug_output_timestep, &
214	indoor_model, &
215	land_surface, &
216	large_scale_forcing, &
217	nesting_offline, &
218	nudging, &
219	ocean_mode, &
220	plant_canopy, &
221	salsa, &
222	surface_output, &
223	syn_turb_gen, &
224	urban_surface, &
225	vdi_checks, &
226	virtual_flight, &
227	virtual_measurement, &
228	wind_turbine
229
230	!
231	!-- load interface routines of all PALM modules
232	USE biometeorology_mod, &
233	ONLY: bio_parin, &
234	bio_check_data_output, &
235	bio_init, &
236	bio_init_checks, &
237	bio_header, &
238	bio_3d_data_averaging, &
239	bio_data_output_2d, &
240	bio_data_output_3d, &
241	bio_rrd_global, &
242	bio_rrd_local, &
243	bio_wrd_global, &
244	bio_wrd_local
245
246	USE bulk_cloud_model_mod, &
247	ONLY: bulk_cloud_model, &
248	bcm_parin, &
249	bcm_check_parameters, &
250	bcm_check_data_output_pr, &
251	bcm_check_data_output, &
252	bcm_init_arrays, &
253	bcm_init, &
254	bcm_header, &
255	bcm_actions, &
256	bcm_non_advective_processes, &
257	bcm_exchange_horiz, &
258	bcm_prognostic_equations, &
259	bcm_boundary_conditions, &
260	bcm_swap_timelevel, &
261	bcm_3d_data_averaging, &
262	bcm_data_output_2d, &
263	bcm_data_output_3d, &
264	bcm_rrd_global, &
265	bcm_wrd_global, &
266	bcm_rrd_local, &
267	bcm_wrd_local
268
269	USE chemistry_model_mod, &
270	ONLY: chem_parin, &
271	chem_check_parameters, &
272	chem_check_data_output_pr, &
273	chem_check_data_output, &
274	chem_exchange_horiz_bounds, &
275	chem_init_arrays, &
276	chem_init, &
277	chem_header, &
278	chem_actions, &
279	chem_non_advective_processes, &
280	chem_prognostic_equations, &
281	chem_boundary_conditions, &
282	chem_swap_timelevel, &
283	chem_3d_data_averaging, &
284	chem_data_output_2d, &
285	chem_data_output_3d, &
286	chem_statistics, &
287	chem_rrd_local, &
288	chem_wrd_local
289
290	USE diagnostic_output_quantities_mod, &
291	ONLY: doq_3d_data_averaging, &
292	doq_check_data_output, &
293	doq_define_netcdf_grid, &
294	doq_init, &
295	doq_output_2d, &
296	doq_output_3d, &
297	doq_wrd_local
298	! doq_rrd_local, &
299
300	USE flight_mod, &
301	ONLY: flight_parin, &
302	flight_header, &
303	flight_init, &
304	flight_rrd_global, &
305	flight_wrd_global
306
307	USE gust_mod, &
308	ONLY: gust_module_enabled, &
309	gust_parin, &
310	gust_check_parameters, &
311	gust_check_data_output_pr, &
312	gust_check_data_output, &
313	gust_init_arrays, &
314	gust_init, &
315	gust_header, &
316	gust_actions, &
317	gust_prognostic_equations, &
318	gust_swap_timelevel, &
319	gust_3d_data_averaging, &
320	gust_data_output_2d, &
321	gust_data_output_3d, &
322	gust_statistics, &
323	gust_rrd_global, &
324	gust_wrd_global, &
325	gust_rrd_local, &
326	gust_wrd_local
327
328	USE indoor_model_mod, &
329	ONLY: im_parin, &
330	im_check_data_output, &
331	im_check_parameters, &
332	im_data_output_3d, &
333	im_init
334
335	USE lagrangian_particle_model_mod, &
336	ONLY: lpm_parin, &
337	lpm_header, &
338	lpm_check_parameters, &
339	lpm_init_arrays, &
340	lpm_init, &
341	lpm_actions, &
342	lpm_rrd_global, &
343	lpm_rrd_local, &
344	lpm_wrd_local, &
345	lpm_wrd_global
346
347	USE land_surface_model_mod, &
348	ONLY: lsm_parin, &
349	lsm_check_parameters, &
350	lsm_check_data_output_pr, &
351	lsm_check_data_output, &
352	lsm_init_arrays, &
353	lsm_init, &
354	lsm_header, &
355	lsm_swap_timelevel, &
356	lsm_3d_data_averaging, &
357	lsm_data_output_2d, &
358	lsm_rrd_local, &
359	lsm_wrd_local
360
361	USE lsf_nudging_mod, &
362	ONLY: lsf_nudging_check_parameters, &
363	lsf_nudging_check_data_output_pr, &
364	lsf_init, &
365	nudge_init, &
366	lsf_nudging_header
367
368	USE multi_agent_system_mod, &
369	ONLY: mas_parin
370
371	USE nesting_offl_mod, &
372	ONLY: nesting_offl_parin, &
373	nesting_offl_check_parameters, &
374	nesting_offl_header
375
376	USE ocean_mod, &
377	ONLY: ocean_parin, &
378	ocean_check_parameters, &
379	ocean_check_data_output_pr, &
380	ocean_check_data_output, &
381	ocean_init_arrays, &
382	ocean_init, &
383	ocean_header, &
384	ocean_actions, &
385	ocean_prognostic_equations, &
386	ocean_boundary_conditions, &
387	ocean_swap_timelevel, &
388	ocean_3d_data_averaging, &
389	ocean_data_output_2d, &
390	ocean_data_output_3d, &
391	ocean_rrd_global, &
392	ocean_wrd_global, &
393	ocean_rrd_local, &
394	ocean_wrd_local
395
396	USE particle_attributes, &
397	ONLY: particle_advection
398
399	USE plant_canopy_model_mod, &
400	ONLY: pcm_parin, &
401	pcm_check_parameters, &
402	pcm_check_data_output, &
403	pcm_init, &
404	pcm_header, &
405	pcm_3d_data_averaging, &
406	pcm_data_output_3d
407
408	USE radiation_model_mod, &
409	ONLY: radiation, &
410	radiation_parin, &
411	radiation_check_parameters, &
412	radiation_check_data_output_ts, &
413	radiation_check_data_output_pr, &
414	radiation_check_data_output, &
415	radiation_init, &
416	radiation_header, &
417	radiation_3d_data_averaging, &
418	radiation_data_output_2d, &
419	radiation_data_output_3d, &
420	radiation_rrd_local, &
421	radiation_wrd_local
422
423	USE salsa_mod, &
424	ONLY: salsa_parin, &
425	salsa_check_parameters, &
426	salsa_check_data_output_pr, &
427	salsa_check_data_output, &
428	salsa_init_arrays, &
429	salsa_init, &
430	salsa_header, &
431	salsa_actions, &
432	salsa_non_advective_processes, &
433	salsa_exchange_horiz_bounds, &
434	salsa_prognostic_equations, &
435	salsa_boundary_conditions, &
436	salsa_swap_timelevel, &
437	salsa_3d_data_averaging, &
438	salsa_data_output_2d, &
439	salsa_data_output_3d, &
440	salsa_statistics, &
441	salsa_rrd_local, &
442	salsa_wrd_local
443
444	USE spectra_mod, &
445	ONLY: calculate_spectra, &
446	spectra_parin, &
447	spectra_check_parameters, &
448	spectra_header
449
450	USE surface_data_output_mod, &
451	ONLY: surface_data_output_parin, &
452	surface_data_output_check_parameters, &
453	surface_data_output_init_arrays, &
454	surface_data_output_rrd_local, &
455	surface_data_output_rrd_global, &
456	surface_data_output_wrd_local, &
457	surface_data_output_wrd_global
458
459	USE synthetic_turbulence_generator_mod, &
460	ONLY: stg_parin, &
461	stg_check_parameters, &
462	stg_header, &
463	stg_rrd_global, &
464	stg_wrd_global
465
466	USE urban_surface_mod, &
467	ONLY: usm_parin, &
468	usm_check_parameters, &
469	usm_check_data_output, &
470	usm_init_arrays, &
471	usm_init, &
472	usm_swap_timelevel, &
473	usm_3d_data_averaging, &
474	usm_rrd_local, &
475	usm_wrd_local
476
477	USE vdi_internal_controls, &
478	ONLY: vdi_actions
479
480	USE virtual_measurement_mod, &
481	ONLY: vm_check_parameters, &
482	vm_init, &
483	vm_last_actions, &
484	vm_parin
485
486	USE wind_turbine_model_mod, &
487	ONLY: wtm_parin, &
488	wtm_check_parameters, &
489	wtm_init_arrays, &
490	wtm_init, &
491	wtm_actions, &
492	wtm_rrd_global, &
493	wtm_wrd_global
494
495	USE user, &
496	ONLY: user_module_enabled, &
497	user_parin, &
498	user_check_parameters, &
499	user_check_data_output_ts, &
500	user_check_data_output_pr, &
501	user_check_data_output, &
502	user_init, &
503	user_init_arrays, &
504	user_header, &
505	user_actions, &
506	user_3d_data_averaging, &
507	user_data_output_2d, &
508	user_data_output_3d, &
509	user_statistics, &
510	user_rrd_global, &
511	user_rrd_local, &
512	user_wrd_global, &
513	user_wrd_local, &
514	user_last_actions
515
516	IMPLICIT NONE
517
518	PRIVATE
519
520	!
521	!-- Public functions
522	PUBLIC &
523	module_interface_parin, &
524	module_interface_check_parameters, &
525	module_interface_check_data_output_ts, &
526	module_interface_check_data_output_pr, &
527	module_interface_check_data_output, &
528	module_interface_init_masks, &
529	module_interface_define_netcdf_grid, &
530	module_interface_init_arrays, &
531	module_interface_init, &
532	module_interface_init_checks, &
533	module_interface_header, &
534	module_interface_actions, &
535	module_interface_non_advective_processes, &
536	module_interface_exchange_horiz, &
537	module_interface_prognostic_equations, &
538	module_interface_boundary_conditions, &
539	module_interface_swap_timelevel, &
540	module_interface_3d_data_averaging, &
541	module_interface_data_output_2d, &
542	module_interface_data_output_3d, &
543	module_interface_statistics, &
544	module_interface_rrd_global, &
545	module_interface_wrd_global, &
546	module_interface_rrd_local, &
547	module_interface_wrd_local, &
548	module_interface_last_actions
549
550
551	INTERFACE module_interface_parin
552	MODULE PROCEDURE module_interface_parin
553	END INTERFACE module_interface_parin
554
555	INTERFACE module_interface_check_parameters
556	MODULE PROCEDURE module_interface_check_parameters
557	END INTERFACE module_interface_check_parameters
558
559	INTERFACE module_interface_check_data_output_ts
560	MODULE PROCEDURE module_interface_check_data_output_ts
561	END INTERFACE module_interface_check_data_output_ts
562
563	INTERFACE module_interface_check_data_output_pr
564	MODULE PROCEDURE module_interface_check_data_output_pr
565	END INTERFACE module_interface_check_data_output_pr
566
567	INTERFACE module_interface_check_data_output
568	MODULE PROCEDURE module_interface_check_data_output
569	END INTERFACE module_interface_check_data_output
570
571	INTERFACE module_interface_init_masks
572	MODULE PROCEDURE module_interface_init_masks
573	END INTERFACE module_interface_init_masks
574
575	INTERFACE module_interface_define_netcdf_grid
576	MODULE PROCEDURE module_interface_define_netcdf_grid
577	END INTERFACE module_interface_define_netcdf_grid
578
579	INTERFACE module_interface_init_arrays
580	MODULE PROCEDURE module_interface_init_arrays
581	END INTERFACE module_interface_init_arrays
582
583	INTERFACE module_interface_init
584	MODULE PROCEDURE module_interface_init
585	END INTERFACE module_interface_init
586
587	INTERFACE module_interface_init_checks
588	MODULE PROCEDURE module_interface_init_checks
589	END INTERFACE module_interface_init_checks
590
591	INTERFACE module_interface_header
592	MODULE PROCEDURE module_interface_header
593	END INTERFACE module_interface_header
594
595	INTERFACE module_interface_actions
596	MODULE PROCEDURE module_interface_actions
597	MODULE PROCEDURE module_interface_actions_ij
598	END INTERFACE module_interface_actions
599
600	INTERFACE module_interface_non_advective_processes
601	MODULE PROCEDURE module_interface_non_advective_processes
602	MODULE PROCEDURE module_interface_non_advective_processes_ij
603	END INTERFACE module_interface_non_advective_processes
604
605	INTERFACE module_interface_exchange_horiz
606	MODULE PROCEDURE module_interface_exchange_horiz
607	END INTERFACE module_interface_exchange_horiz
608
609	INTERFACE module_interface_prognostic_equations
610	MODULE PROCEDURE module_interface_prognostic_equations
611	MODULE PROCEDURE module_interface_prognostic_equations_ij
612	END INTERFACE module_interface_prognostic_equations
613
614	INTERFACE module_interface_swap_timelevel
615	MODULE PROCEDURE module_interface_swap_timelevel
616	END INTERFACE module_interface_swap_timelevel
617
618	INTERFACE module_interface_boundary_conditions
619	MODULE PROCEDURE module_interface_boundary_conditions
620	END INTERFACE module_interface_boundary_conditions
621
622	INTERFACE module_interface_3d_data_averaging
623	MODULE PROCEDURE module_interface_3d_data_averaging
624	END INTERFACE module_interface_3d_data_averaging
625
626	INTERFACE module_interface_data_output_2d
627	MODULE PROCEDURE module_interface_data_output_2d
628	END INTERFACE module_interface_data_output_2d
629
630	INTERFACE module_interface_data_output_3d
631	MODULE PROCEDURE module_interface_data_output_3d
632	END INTERFACE module_interface_data_output_3d
633
634	INTERFACE module_interface_statistics
635	MODULE PROCEDURE module_interface_statistics
636	END INTERFACE module_interface_statistics
637
638	INTERFACE module_interface_rrd_global
639	MODULE PROCEDURE module_interface_rrd_global
640	END INTERFACE module_interface_rrd_global
641
642	INTERFACE module_interface_wrd_global
643	MODULE PROCEDURE module_interface_wrd_global
644	END INTERFACE module_interface_wrd_global
645
646	INTERFACE module_interface_rrd_local
647	MODULE PROCEDURE module_interface_rrd_local
648	END INTERFACE module_interface_rrd_local
649
650	INTERFACE module_interface_wrd_local
651	MODULE PROCEDURE module_interface_wrd_local
652	END INTERFACE module_interface_wrd_local
653
654	INTERFACE module_interface_last_actions
655	MODULE PROCEDURE module_interface_last_actions
656	END INTERFACE module_interface_last_actions
657
658
659	CONTAINS
660
661
662	!------------------------------------------------------------------------------!
663	! Description:
664	! ------------
665	!> Read module-specific parameter namelists
666	!------------------------------------------------------------------------------!
667	SUBROUTINE module_interface_parin
668
669
670	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
671
672	CALL dynamics_parin
673
674	CALL bio_parin
675	CALL bcm_parin
676	CALL chem_parin
677	CALL flight_parin ! ToDo: rename module to match filename
678	CALL gust_parin
679	CALL im_parin
680	CALL lpm_parin
681	CALL lsm_parin
682	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
683	CALL mas_parin
684	CALL nesting_offl_parin
685	CALL ocean_parin
686	CALL pcm_parin
687	CALL radiation_parin
688	CALL salsa_parin
689	CALL spectra_parin
690	CALL surface_data_output_parin
691	CALL stg_parin
692	CALL usm_parin
693	CALL vm_parin
694	CALL wtm_parin
695
696	CALL user_parin
697
698	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
699
700
701	END SUBROUTINE module_interface_parin
702
703
704	!------------------------------------------------------------------------------!
705	! Description:
706	! ------------
707	!> Perform module-specific initialization checks
708	!------------------------------------------------------------------------------!
709	SUBROUTINE module_interface_check_parameters
710
711
712	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
713
714	CALL dynamics_check_parameters
715	CALL tcm_check_parameters
716
717	IF ( bulk_cloud_model ) CALL bcm_check_parameters
718	IF ( air_chemistry ) CALL chem_check_parameters
719	IF ( gust_module_enabled ) CALL gust_check_parameters
720	IF ( indoor_model ) CALL im_check_parameters
721	IF ( particle_advection ) CALL lpm_check_parameters
722	IF ( land_surface ) CALL lsm_check_parameters
723	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
724	IF ( nesting_offline ) CALL nesting_offl_check_parameters
725	IF ( ocean_mode ) CALL ocean_check_parameters
726	IF ( plant_canopy ) CALL pcm_check_parameters
727	IF ( radiation ) CALL radiation_check_parameters
728	IF ( salsa ) CALL salsa_check_parameters
729	IF ( calculate_spectra ) CALL spectra_check_parameters
730	IF ( surface_output ) CALL surface_data_output_check_parameters
731	IF ( syn_turb_gen ) CALL stg_check_parameters
732	IF ( urban_surface ) CALL usm_check_parameters
733	IF ( virtual_measurement ) CALL vm_check_parameters
734	IF ( wind_turbine ) CALL wtm_check_parameters
735
736	IF ( user_module_enabled ) CALL user_check_parameters
737
738	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
739
740
741	END SUBROUTINE module_interface_check_parameters
742
743
744	!------------------------------------------------------------------------------!
745	! Description:
746	! ------------
747	!> Check module-specific data output of timeseries
748	!------------------------------------------------------------------------------!
749	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
750
751
752	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
753	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
754	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
755	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
756
757
758	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
759
760	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
761
762	IF ( radiation ) THEN
763	CALL radiation_check_data_output_ts( dots_max, dots_num )
764	ENDIF
765
766	IF ( user_module_enabled ) THEN
767	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
768	ENDIF
769
770	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
771
772
773	END SUBROUTINE module_interface_check_data_output_ts
774
775
776	!------------------------------------------------------------------------------!
777	! Description:
778	! ------------
779	!> Check module-specific data output of profiles
780	!------------------------------------------------------------------------------!
781	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
782	dopr_unit )
783
784
785	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
786	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
787	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
788	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
789
790
791	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
792
793	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
794
795	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
796	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
797	ENDIF
798
799	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
800	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
801	ENDIF
802
803	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
804	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
805	ENDIF
806
807	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
808	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
809	ENDIF
810
811	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
812	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
813	ENDIF
814
815	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
816	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
817	ENDIF
818
819	IF ( unit == 'illegal' .AND. radiation ) THEN
820	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
821	ENDIF
822
823	IF ( unit == 'illegal' .AND. salsa ) THEN
824	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
825	ENDIF
826
827	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
828	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
829	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
830	ENDIF
831
832	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
833
834
835	END SUBROUTINE module_interface_check_data_output_pr
836
837	!------------------------------------------------------------------------------!
838	! Description:
839	! ------------
840	!> Check module-specific 2D and 3D data output
841	!------------------------------------------------------------------------------!
842	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
843
844
845	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
846	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
847
848	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
849	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
850	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
851	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
852
853
854	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
855
856	CALL dynamics_check_data_output( variable, unit )
857
858	CALL tcm_check_data_output( variable, unit )
859
860	IF ( unit == 'illegal' .AND. biometeorology ) THEN
861	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
862	ENDIF
863
864	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
865	CALL bcm_check_data_output( variable, unit )
866	ENDIF
867
868	IF ( unit == 'illegal' .AND. air_chemistry &
869	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
870	CALL chem_check_data_output( variable, unit, i, ilen, k )
871	ENDIF
872
873	IF ( unit == 'illegal' ) THEN
874	CALL doq_check_data_output( variable, unit )
875	ENDIF
876
877	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
878	CALL gust_check_data_output( variable, unit )
879	ENDIF
880
881	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
882	CALL lsm_check_data_output( variable, unit, i, ilen, k )
883	ENDIF
884
885	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
886	CALL ocean_check_data_output( variable, unit )
887	ENDIF
888
889	IF ( unit == 'illegal' .AND. plant_canopy &
890	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
891	CALL pcm_check_data_output( variable, unit )
892	ENDIF
893
894	IF ( unit == 'illegal' .AND. radiation ) THEN
895	CALL radiation_check_data_output( variable, unit, i, ilen, k )
896	ENDIF
897
898	IF ( unit == 'illegal' .AND. salsa ) THEN
899	CALL salsa_check_data_output( variable, unit )
900	ENDIF
901
902	IF ( unit == 'illegal' .AND. indoor_model ) THEN
903	CALL im_check_data_output( variable, unit )
904	ENDIF
905
906	IF ( unit == 'illegal' .AND. urban_surface &
907	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
908	CALL usm_check_data_output( variable, unit )
909	ENDIF
910
911	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
912	unit = ''
913	CALL user_check_data_output( variable, unit )
914	ENDIF
915
916	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
917
918
919	END SUBROUTINE module_interface_check_data_output
920
921
922	!------------------------------------------------------------------------------!
923	!
924	! Description:
925	! ------------
926	!> Interface for init_masks. ToDo: get rid of these redundant calls!
927	!------------------------------------------------------------------------------!
928	SUBROUTINE module_interface_init_masks( variable, unit )
929
930
931	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
932	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
933
934
935	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
936
937	CALL dynamics_init_masks( variable, unit )
938
939	IF ( unit == 'illegal' .AND. air_chemistry &
940	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
941	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
942	ENDIF
943
944	IF ( unit == 'illegal' ) THEN
945	CALL doq_check_data_output( variable, unit )
946	ENDIF
947
948	IF ( unit == 'illegal' .AND. radiation ) THEN
949	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
950	ENDIF
951
952	IF ( unit == 'illegal' .AND. salsa ) THEN
953	CALL salsa_check_data_output( variable, unit )
954	ENDIF
955
956	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
957	unit = ''
958	CALL user_check_data_output( variable, unit )
959	ENDIF
960
961	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
962
963
964	END SUBROUTINE module_interface_init_masks
965
966
967	!------------------------------------------------------------------------------!
968	!
969	! Description:
970	! ------------
971	!> Define appropriate grid for module-specific netcdf output variables.
972	!------------------------------------------------------------------------------!
973	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
974	grid_x, grid_y, grid_z )
975
976
977	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
978	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
979	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
980	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
981	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
982
983
984	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
985	!
986	!-- As long as no action is done in this subroutine, initialize strings with
987	!-- intent(out) attribute, in order to avoid compiler warnings.
988	found = .FALSE.
989	grid_x = 'none'
990	grid_y = 'none'
991	grid_z = 'none'
992	!
993	!-- Use var to avoid compiler warning about unused variable
994	IF ( var == ' ' ) RETURN
995
996	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
997
998
999	END SUBROUTINE module_interface_define_netcdf_grid
1000
1001
1002	!------------------------------------------------------------------------------!
1003	! Description:
1004	! ------------
1005	!> Allocate module-specific arrays and pointers
1006	!------------------------------------------------------------------------------!
1007	SUBROUTINE module_interface_init_arrays
1008
1009
1010	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
1011
1012	CALL dynamics_init_arrays
1013	CALL tcm_init_arrays
1014
1015	IF ( bulk_cloud_model ) CALL bcm_init_arrays
1016	IF ( air_chemistry ) CALL chem_init_arrays
1017	IF ( gust_module_enabled ) CALL gust_init_arrays
1018	IF ( particle_advection ) CALL lpm_init_arrays
1019	IF ( land_surface ) CALL lsm_init_arrays
1020	IF ( ocean_mode ) CALL ocean_init_arrays
1021	IF ( salsa ) CALL salsa_init_arrays
1022	IF ( urban_surface ) CALL usm_init_arrays
1023	IF ( surface_output ) CALL surface_data_output_init_arrays
1024	IF ( wind_turbine ) CALL wtm_init_arrays
1025
1026	IF ( user_module_enabled ) CALL user_init_arrays
1027
1028	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1029
1030
1031	END SUBROUTINE module_interface_init_arrays
1032
1033
1034	!------------------------------------------------------------------------------!
1035	! Description:
1036	! ------------
1037	!> Perform module-specific initialization
1038	!------------------------------------------------------------------------------!
1039	SUBROUTINE module_interface_init
1040
1041
1042	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1043
1044	CALL dynamics_init
1045	CALL tcm_init
1046
1047	IF ( biometeorology ) CALL bio_init
1048	IF ( bulk_cloud_model ) CALL bcm_init
1049	IF ( air_chemistry ) CALL chem_init
1050	IF ( virtual_flight ) CALL flight_init
1051	IF ( gust_module_enabled ) CALL gust_init
1052	IF ( indoor_model ) CALL im_init
1053	IF ( particle_advection ) CALL lpm_init
1054	IF ( large_scale_forcing ) CALL lsf_init
1055	IF ( land_surface ) CALL lsm_init
1056	IF ( nudging ) CALL nudge_init
1057	IF ( ocean_mode ) CALL ocean_init
1058	IF ( plant_canopy ) CALL pcm_init
1059	IF ( salsa ) CALL salsa_init
1060	IF ( urban_surface ) CALL usm_init
1061	IF ( virtual_measurement ) CALL vm_init
1062	IF ( wind_turbine ) CALL wtm_init
1063	IF ( radiation ) CALL radiation_init
1064
1065	CALL doq_init
1066
1067	IF ( user_module_enabled ) CALL user_init
1068
1069	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1070
1071
1072	END SUBROUTINE module_interface_init
1073
1074
1075	!------------------------------------------------------------------------------!
1076	! Description:
1077	! ------------
1078	!> Perform module-specific post-initialization checks
1079	!------------------------------------------------------------------------------!
1080	SUBROUTINE module_interface_init_checks
1081
1082
1083	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1084
1085	CALL dynamics_init_checks
1086
1087	IF ( biometeorology ) CALL bio_init_checks
1088
1089	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1090
1091
1092	END SUBROUTINE module_interface_init_checks
1093
1094
1095	!------------------------------------------------------------------------------!
1096	! Description:
1097	! ------------
1098	!> Gather module-specific header output
1099	!------------------------------------------------------------------------------!
1100	SUBROUTINE module_interface_header( io )
1101
1102
1103	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1104
1105
1106	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1107
1108	CALL dynamics_header( io )
1109
1110	IF ( biometeorology ) CALL bio_header ( io )
1111	IF ( bulk_cloud_model ) CALL bcm_header( io )
1112	IF ( air_chemistry ) CALL chem_header ( io )
1113	IF ( virtual_flight ) CALL flight_header( io )
1114	IF ( gust_module_enabled ) CALL gust_header( io )
1115	IF ( particle_advection ) CALL lpm_header( io )
1116	IF ( land_surface ) CALL lsm_header( io )
1117	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1118	IF ( nesting_offline ) CALL nesting_offl_header( io )
1119	IF ( ocean_mode ) CALL ocean_header( io )
1120	IF ( plant_canopy ) CALL pcm_header( io )
1121	IF ( radiation ) CALL radiation_header( io )
1122	IF ( salsa ) CALL salsa_header( io )
1123	IF ( calculate_spectra ) CALL spectra_header( io )
1124	IF ( syn_turb_gen ) CALL stg_header( io )
1125
1126	IF ( user_module_enabled ) CALL user_header( io )
1127
1128	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1129
1130
1131	END SUBROUTINE module_interface_header
1132
1133
1134	!------------------------------------------------------------------------------!
1135	! Description:
1136	! ------------
1137	!> Perform module-specific actions while in time-integration (vector-optimized)
1138	!------------------------------------------------------------------------------!
1139	SUBROUTINE module_interface_actions( location )
1140
1141
1142	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1143
1144	CALL dynamics_actions( location )
1145	CALL tcm_actions( location )
1146
1147	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1148	IF ( air_chemistry ) CALL chem_actions( location )
1149	IF ( gust_module_enabled ) CALL gust_actions( location )
1150	IF ( particle_advection ) CALL lpm_actions( location )
1151	IF ( ocean_mode ) CALL ocean_actions( location )
1152	IF ( salsa ) CALL salsa_actions( location )
1153	IF ( wind_turbine ) CALL wtm_actions( location )
1154
1155	IF ( user_module_enabled ) CALL user_actions( location )
1156	IF ( vdi_checks ) CALL vdi_actions( location )
1157
1158
1159	END SUBROUTINE module_interface_actions
1160
1161
1162	!------------------------------------------------------------------------------!
1163	! Description:
1164	! ------------
1165	!> Perform module-specific actions while in time-integration (cache-optimized)
1166	!------------------------------------------------------------------------------!
1167	SUBROUTINE module_interface_actions_ij( i, j, location )
1168
1169
1170	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1171	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1172	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1173
1174	CALL dynamics_actions( i, j, location )
1175	CALL tcm_actions( i, j, location )
1176
1177	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1178	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1179	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1180	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1181	IF ( salsa ) CALL salsa_actions( i, j, location )
1182	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1183
1184	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1185
1186
1187	END SUBROUTINE module_interface_actions_ij
1188
1189
1190	!------------------------------------------------------------------------------!
1191	! Description:
1192	! ------------
1193	!> Compute module-specific non_advective_processes (vector-optimized)
1194	!------------------------------------------------------------------------------!
1195	SUBROUTINE module_interface_non_advective_processes
1196
1197
1198	CALL dynamics_non_advective_processes
1199
1200	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1201	IF ( air_chemistry ) CALL chem_non_advective_processes
1202	IF ( salsa ) CALL salsa_non_advective_processes
1203
1204
1205	END SUBROUTINE module_interface_non_advective_processes
1206
1207
1208	!------------------------------------------------------------------------------!
1209	! Description:
1210	! ------------
1211	!> Compute module-specific non_advective_processes (cache-optimized)
1212	!------------------------------------------------------------------------------!
1213	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1214
1215
1216	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1217	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1218
1219	CALL dynamics_non_advective_processes( i, j )
1220
1221	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1222	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1223	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1224
1225
1226	END SUBROUTINE module_interface_non_advective_processes_ij
1227
1228	!------------------------------------------------------------------------------!
1229	! Description:
1230	! ------------
1231	!> Exchange horiz for module-specific quantities
1232	!------------------------------------------------------------------------------!
1233	SUBROUTINE module_interface_exchange_horiz
1234
1235
1236	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1237
1238	CALL dynamics_exchange_horiz
1239
1240	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1241	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1242	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1243
1244	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1245
1246
1247	END SUBROUTINE module_interface_exchange_horiz
1248
1249
1250	!------------------------------------------------------------------------------!
1251	! Description:
1252	! ------------
1253	!> Compute module-specific prognostic_equations (vector-optimized)
1254	!------------------------------------------------------------------------------!
1255	SUBROUTINE module_interface_prognostic_equations
1256
1257
1258	CALL dynamics_prognostic_equations
1259	CALL tcm_prognostic_equations
1260
1261	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1262	IF ( air_chemistry ) CALL chem_prognostic_equations
1263	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1264	IF ( ocean_mode ) CALL ocean_prognostic_equations
1265	IF ( salsa ) CALL salsa_prognostic_equations
1266
1267
1268	END SUBROUTINE module_interface_prognostic_equations
1269
1270
1271	!------------------------------------------------------------------------------!
1272	! Description:
1273	! ------------
1274	!> Compute module-specific prognostic_equations (cache-optimized)
1275	!------------------------------------------------------------------------------!
1276	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1277
1278
1279	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1280	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1281	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1282	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1283
1284	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1285	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1286
1287	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1288	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1289	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1290	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1291	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1292
1293
1294	END SUBROUTINE module_interface_prognostic_equations_ij
1295
1296	!------------------------------------------------------------------------------!
1297	! Description:
1298	! ------------
1299	!> Compute module-specific boundary conditions
1300	!------------------------------------------------------------------------------!
1301	SUBROUTINE module_interface_boundary_conditions
1302
1303
1304	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
1305
1306	CALL dynamics_boundary_conditions
1307	CALL tcm_boundary_conds
1308
1309	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
1310	IF ( air_chemistry ) CALL chem_boundary_conditions
1311	IF ( ocean_mode ) CALL ocean_boundary_conditions
1312	IF ( salsa ) CALL salsa_boundary_conditions
1313
1314	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
1315
1316
1317	END SUBROUTINE module_interface_boundary_conditions
1318
1319	!------------------------------------------------------------------------------!
1320	! Description:
1321	! ------------
1322	!> Swap the timelevel pointers for module-specific arrays
1323	!------------------------------------------------------------------------------!
1324	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1325
1326
1327	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1328
1329
1330	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1331
1332	CALL dynamics_swap_timelevel( swap_mode )
1333	CALL tcm_swap_timelevel( swap_mode )
1334
1335	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1336	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1337	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1338	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1339	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1340	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1341	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1342
1343	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1344
1345
1346	END SUBROUTINE module_interface_swap_timelevel
1347
1348
1349	!------------------------------------------------------------------------------!
1350	!
1351	! Description:
1352	! ------------
1353	!> Perform module-specific averaging of 3D data
1354	!------------------------------------------------------------------------------!
1355	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1356
1357
1358	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1359	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1360
1361
1362	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1363
1364	CALL dynamics_3d_data_averaging( mode, variable )
1365	CALL tcm_3d_data_averaging( mode, variable )
1366
1367	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1368	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1369	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1370	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1371	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1372	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1373	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1374	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1375	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1376	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1377	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1378
1379	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1380
1381	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1382
1383
1384	END SUBROUTINE module_interface_3d_data_averaging
1385
1386	!------------------------------------------------------------------------------!
1387	!
1388	! Description:
1389	! ------------
1390	!> Define module-specific 2D output variables
1391	!------------------------------------------------------------------------------!
1392	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1393	local_pf, two_d, nzb_do, nzt_do, &
1394	fill_value )
1395
1396	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1397	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1398	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1399	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1400	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1401	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1402	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1403	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1404	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1405
1406	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1407
1408
1409	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1410
1411	CALL dynamics_data_output_2d( &
1412	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1413	)
1414
1415	IF ( .NOT. found ) THEN
1416	CALL tcm_data_output_2d( &
1417	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1418	)
1419	ENDIF
1420
1421	IF ( .NOT. found .AND. biometeorology ) THEN
1422	CALL bio_data_output_2d( &
1423	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1424	)
1425	ENDIF
1426
1427	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1428	CALL bcm_data_output_2d( &
1429	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1430	)
1431	ENDIF
1432
1433	IF ( .NOT. found .AND. air_chemistry ) THEN
1434	CALL chem_data_output_2d( &
1435	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1436	)
1437	ENDIF
1438
1439	IF ( .NOT. found ) THEN
1440	CALL doq_output_2d( &
1441	av, variable, found, grid, mode, local_pf, two_d, &
1442	nzb_do, nzt_do, fill_value )
1443	ENDIF
1444
1445	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1446	CALL gust_data_output_2d( &
1447	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1448	)
1449	ENDIF
1450
1451	IF ( .NOT. found .AND. land_surface ) THEN
1452	CALL lsm_data_output_2d( &
1453	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1454	)
1455	ENDIF
1456
1457	IF ( .NOT. found .AND. ocean_mode ) THEN
1458	CALL ocean_data_output_2d( &
1459	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1460	)
1461	ENDIF
1462
1463	IF ( .NOT. found .AND. radiation ) THEN
1464	CALL radiation_data_output_2d( &
1465	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1466	)
1467	ENDIF
1468
1469	IF ( .NOT. found .AND. salsa ) THEN
1470	CALL salsa_data_output_2d( &
1471	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1472	)
1473	ENDIF
1474
1475	IF ( .NOT. found .AND. user_module_enabled ) THEN
1476	CALL user_data_output_2d( &
1477	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1478	)
1479	ENDIF
1480
1481	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1482
1483
1484	END SUBROUTINE module_interface_data_output_2d
1485
1486
1487	!------------------------------------------------------------------------------!
1488	!
1489	! Description:
1490	! ------------
1491	!> Define module-specific 3D output variables
1492	!------------------------------------------------------------------------------!
1493	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1494	fill_value, resorted, nzb_do, nzt_do )
1495
1496
1497	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1498	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1499	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1500	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1501	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1502	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1503	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1504
1505	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1506
1507
1508	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1509
1510	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1511	resorted = .FALSE.
1512
1513	IF ( .NOT. found ) THEN
1514	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1515	resorted = .TRUE.
1516	ENDIF
1517
1518	IF ( .NOT. found .AND. biometeorology ) THEN
1519	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1520	resorted = .FALSE.
1521	ENDIF
1522
1523	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1524	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1525	resorted = .TRUE.
1526	ENDIF
1527
1528	IF ( .NOT. found .AND. air_chemistry ) THEN
1529	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1530	resorted = .TRUE.
1531	ENDIF
1532
1533	IF ( .NOT. found ) THEN
1534	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1535	resorted = .TRUE.
1536	ENDIF
1537
1538	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1539	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1540	resorted = .TRUE.
1541	ENDIF
1542
1543	IF ( .NOT. found .AND. indoor_model ) THEN
1544	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1545	resorted = .TRUE.
1546	ENDIF
1547
1548	IF ( .NOT. found .AND. ocean_mode ) THEN
1549	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1550	resorted = .TRUE.
1551	ENDIF
1552
1553	IF ( .NOT. found .AND. plant_canopy ) THEN
1554	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1555	resorted = .TRUE.
1556	ENDIF
1557
1558	IF ( .NOT. found .AND. radiation ) THEN
1559	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1560	resorted = .TRUE.
1561	ENDIF
1562
1563	IF ( .NOT. found .AND. salsa ) THEN
1564	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1565	resorted = .TRUE.
1566	ENDIF
1567
1568	IF ( .NOT. found .AND. user_module_enabled ) THEN
1569	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1570	resorted = .TRUE.
1571	ENDIF
1572
1573	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1574
1575
1576	END SUBROUTINE module_interface_data_output_3d
1577
1578
1579	!------------------------------------------------------------------------------!
1580	! Description:
1581	! ------------
1582	!> Compute module-specific profile and timeseries data
1583	!------------------------------------------------------------------------------!
1584	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1585
1586
1587	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1588	INTEGER(iwp), INTENT(IN) :: sr !<
1589	INTEGER(iwp), INTENT(IN) :: tn !<
1590	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1591
1592
1593	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1594
1595	CALL dynamics_statistics( mode, sr, tn )
1596
1597	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1598	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1599	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1600
1601	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1602
1603	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1604
1605
1606	END SUBROUTINE module_interface_statistics
1607
1608
1609	!------------------------------------------------------------------------------!
1610	! Description:
1611	! ------------
1612	!> Read module-specific restart data globaly shared by all MPI ranks
1613	!------------------------------------------------------------------------------!
1614	SUBROUTINE module_interface_rrd_global( found )
1615
1616
1617	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1618
1619
1620	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1621
1622	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1623
1624	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1625	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1626	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1627	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1628	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1629	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1630	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1631	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1632	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1633
1634	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1635
1636	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1637
1638
1639	END SUBROUTINE module_interface_rrd_global
1640
1641
1642	!------------------------------------------------------------------------------!
1643	! Description:
1644	! ------------
1645	!> Write module-specific restart data globaly shared by all MPI ranks
1646	!------------------------------------------------------------------------------!
1647	SUBROUTINE module_interface_wrd_global
1648
1649
1650	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1651
1652	CALL dynamics_wrd_global
1653
1654	IF ( biometeorology ) CALL bio_wrd_global
1655	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1656	IF ( virtual_flight ) CALL flight_wrd_global
1657	IF ( gust_module_enabled ) CALL gust_wrd_global
1658	IF ( ocean_mode ) CALL ocean_wrd_global
1659	IF ( syn_turb_gen ) CALL stg_wrd_global
1660	IF ( wind_turbine ) CALL wtm_wrd_global
1661	IF ( surface_output ) CALL surface_data_output_wrd_global
1662
1663	IF ( user_module_enabled ) CALL user_wrd_global
1664
1665	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1666
1667
1668	END SUBROUTINE module_interface_wrd_global
1669
1670
1671	!------------------------------------------------------------------------------!
1672	! Description:
1673	! ------------
1674	!> Read module-specific restart data specific to local MPI ranks
1675	!------------------------------------------------------------------------------!
1676	SUBROUTINE module_interface_rrd_local( map_index, &
1677	nxlf, nxlc, nxl_on_file, &
1678	nxrf, nxrc, nxr_on_file, &
1679	nynf, nync, nyn_on_file, &
1680	nysf, nysc, nys_on_file, &
1681	tmp_2d, tmp_3d, found )
1682
1683
1684	INTEGER(iwp), INTENT(IN) :: map_index !<
1685	INTEGER(iwp), INTENT(IN) :: nxlc !<
1686	INTEGER(iwp), INTENT(IN) :: nxlf !<
1687	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1688	INTEGER(iwp), INTENT(IN) :: nxrc !<
1689	INTEGER(iwp), INTENT(IN) :: nxrf !<
1690	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1691	INTEGER(iwp), INTENT(IN) :: nync !<
1692	INTEGER(iwp), INTENT(IN) :: nynf !<
1693	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1694	INTEGER(iwp), INTENT(IN) :: nysc !<
1695	INTEGER(iwp), INTENT(IN) :: nysf !<
1696	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1697	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1698
1699	REAL(wp), &
1700	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1701	INTENT(OUT) :: tmp_2d !<
1702	REAL(wp), &
1703	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1704	INTENT(OUT) :: tmp_3d !<
1705
1706
1707	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1708
1709	CALL dynamics_rrd_local( &
1710	map_index, &
1711	nxlf, nxlc, nxl_on_file, &
1712	nxrf, nxrc, nxr_on_file, &
1713	nynf, nync, nyn_on_file, &
1714	nysf, nysc, nys_on_file, &
1715	tmp_2d, tmp_3d, found &
1716	) ! ToDo: change interface to pass variable
1717
1718	IF ( .NOT. found ) CALL bio_rrd_local( &
1719	found &
1720	)
1721
1722	IF ( .NOT. found ) CALL bcm_rrd_local( &
1723	map_index, &
1724	nxlf, nxlc, nxl_on_file, &
1725	nxrf, nxrc, nxr_on_file, &
1726	nynf, nync, nyn_on_file, &
1727	nysf, nysc, nys_on_file, &
1728	tmp_2d, tmp_3d, found &
1729	) ! ToDo: change interface to pass variable
1730
1731	IF ( .NOT. found ) CALL chem_rrd_local( &
1732	map_index, &
1733	nxlf, nxlc, nxl_on_file, &
1734	nxrf, nxrc, nxr_on_file, &
1735	nynf, nync, nyn_on_file, &
1736	nysf, nysc, nys_on_file, &
1737	tmp_3d, found &
1738	) ! ToDo: change interface to pass variable
1739
1740	! IF ( .NOT. found ) CALL doq_rrd_local( &
1741	! map_index, &
1742	! nxlf, nxlc, nxl_on_file, &
1743	! nxrf, nxrc, nxr_on_file, &
1744	! nynf, nync, nyn_on_file, &
1745	! nysf, nysc, nys_on_file, &
1746	! tmp_3d_non_standard, found &
1747	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1748
1749	IF ( .NOT. found ) CALL gust_rrd_local( &
1750	map_index, &
1751	nxlf, nxlc, nxl_on_file, &
1752	nxrf, nxrc, nxr_on_file, &
1753	nynf, nync, nyn_on_file, &
1754	nysf, nysc, nys_on_file, &
1755	tmp_2d, tmp_3d, found &
1756	) ! ToDo: change interface to pass variable
1757
1758	IF ( .NOT. found ) CALL lpm_rrd_local( &
1759	map_index, &
1760	nxlf, nxlc, nxl_on_file, &
1761	nxrf, nxrc, nxr_on_file, &
1762	nynf, nync, nyn_on_file, &
1763	nysf, nysc, nys_on_file, &
1764	tmp_3d, found &
1765	) ! ToDo: change interface to pass variable
1766
1767	IF ( .NOT. found ) CALL lsm_rrd_local( &
1768	map_index, &
1769	nxlf, nxlc, nxl_on_file, &
1770	nxrf, nxrc, nxr_on_file, &
1771	nynf, nync, nyn_on_file, &
1772	nysf, nysc, nys_on_file, &
1773	tmp_2d, found &
1774	) ! ToDo: change interface to pass variable
1775
1776	IF ( .NOT. found ) CALL ocean_rrd_local( &
1777	map_index, &
1778	nxlf, nxlc, nxl_on_file, &
1779	nxrf, nxrc, nxr_on_file, &
1780	nynf, nync, nyn_on_file, &
1781	nysf, nysc, nys_on_file, &
1782	tmp_3d, found &
1783	) ! ToDo: change interface to pass variable
1784
1785	IF ( .NOT. found ) CALL radiation_rrd_local( &
1786	map_index, &
1787	nxlf, nxlc, nxl_on_file, &
1788	nxrf, nxrc, nxr_on_file, &
1789	nynf, nync, nyn_on_file, &
1790	nysf, nysc, nys_on_file, &
1791	tmp_2d, tmp_3d, found &
1792	) ! ToDo: change interface to pass variable
1793
1794	IF ( .NOT. found ) CALL salsa_rrd_local( &
1795	map_index, &
1796	nxlf, nxlc, nxl_on_file, &
1797	nxrf, nxrc, nxr_on_file, &
1798	nynf, nync, nyn_on_file, &
1799	nysf, nysc, nys_on_file, &
1800	tmp_3d, found &
1801	) ! ToDo: change interface to pass variable
1802
1803	IF ( .NOT. found ) CALL usm_rrd_local( &
1804	map_index, &
1805	nxlf, nxlc, nxl_on_file, &
1806	nxrf, nxr_on_file, &
1807	nynf, nyn_on_file, &
1808	nysf, nysc, nys_on_file, &
1809	found &
1810	) ! ToDo: change interface to pass variable
1811	!
1812	!-- Surface data do not need overlap data, so do not pass these information.
1813	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1814
1815	IF ( .NOT. found ) CALL user_rrd_local( &
1816	map_index, &
1817	nxlf, nxlc, nxl_on_file, &
1818	nxrf, nxrc, nxr_on_file, &
1819	nynf, nync, nyn_on_file, &
1820	nysf, nysc, nys_on_file, &
1821	tmp_3d, found &
1822	) ! ToDo: change interface to pass variable
1823
1824	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1825
1826
1827	END SUBROUTINE module_interface_rrd_local
1828
1829
1830	!------------------------------------------------------------------------------!
1831	! Description:
1832	! ------------
1833	!> Write module-specific restart data specific to local MPI ranks
1834	!------------------------------------------------------------------------------!
1835	SUBROUTINE module_interface_wrd_local
1836
1837
1838	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1839
1840	CALL dynamics_wrd_local
1841
1842	IF ( biometeorology ) CALL bio_wrd_local
1843	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1844	IF ( air_chemistry ) CALL chem_wrd_local
1845	CALL doq_wrd_local
1846	IF ( gust_module_enabled ) CALL gust_wrd_local
1847	IF ( particle_advection ) CALL lpm_wrd_local
1848	IF ( land_surface ) CALL lsm_wrd_local
1849	IF ( ocean_mode ) CALL ocean_wrd_local
1850	IF ( radiation ) CALL radiation_wrd_local
1851	IF ( salsa ) CALL salsa_wrd_local
1852	IF ( urban_surface ) CALL usm_wrd_local
1853	IF ( surface_output ) CALL surface_data_output_wrd_local
1854
1855	IF ( user_module_enabled ) CALL user_wrd_local
1856
1857	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1858
1859
1860	END SUBROUTINE module_interface_wrd_local
1861
1862
1863	!------------------------------------------------------------------------------!
1864	! Description:
1865	! ------------
1866	!> Perform module-specific last actions before the program terminates
1867	!------------------------------------------------------------------------------!
1868	SUBROUTINE module_interface_last_actions
1869
1870
1871	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1872
1873	CALL dynamics_last_actions
1874
1875	IF ( virtual_measurement ) CALL vm_last_actions
1876
1877	IF ( user_module_enabled ) CALL user_last_actions
1878
1879	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1880
1881
1882	END SUBROUTINE module_interface_last_actions
1883
1884
1885	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |