Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4218

Last change on this file since 4218 was 4182, checked in by scharf, 5 years ago
corrected "Former revisions" section minor formatting in "Former revisions" section added "Author" section
Property svn:keywords set to `Id`
File size: 82.5 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4182 2019-08-22 15:20:23Z knoop $
27	! Corrected "Former revisions" section
28	!
29	! 4173 2019-08-20 12:04:06Z gronemeier
30	! add vdi_internal_controls
31	!
32	! 4157 2019-08-14 09:19:12Z suehring
33	! Call doq_init from module interface
34	!
35	! 4132 2019-08-02 12:34:17Z suehring
36	! Bugfix in masked data output for diagnostic quantities
37	!
38	! 4131 2019-08-02 11:06:18Z monakurppa
39	! Add output of 3D plant-canopy outputs (merge from branch resler)
40	!
41	! 4048 2019-06-21 21:00:21Z knoop
42	! Moved turbulence_closure_mod calls into this module_interface
43	!
44	! 4047 2019-06-21 18:58:09Z knoop
45	! Introduction of the dynamics module
46	!
47	! 4039 2019-06-18 10:32:41Z suehring
48	! Introduce diagnostic output
49	!
50	! 4028 2019-06-13 12:21:37Z schwenkel
51	! Further modularization of particle code components
52	!
53	! 4017 2019-06-06 12:16:46Z schwenkel
54	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
55	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
56	! are not defined everywhere, e.g. land-surface outputs, this will be
57	! problematic as NaN will be output.
58	!
59	! 3987 2019-05-22 09:52:13Z kanani
60	! Introduce switchable DEBUG file output via debug_message routine
61	!
62	! 3956 2019-05-07 12:32:52Z monakurppa
63	! - Added calls for salsa_non_advective_processes and
64	! salsa_exchange_horiz_bounds
65	! - Moved the call for salsa_data_output_2d/3d before that of
66	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
67	! salsa output variable and encounters a segmentation fault for "Ntot" due
68	! to the shortoutput name
69	!
70	! 3931 2019-04-24 16:34:28Z schwenkel
71	! Changed non_transport_physics to non_advective_processes
72	!
73	! 3930 2019-04-24 14:57:18Z forkel
74	! Correct/complete module_interface introduction for chemistry model
75	!
76	! 3887 2019 -04-12 08:47:41Z schwenkel
77	! Changes related to global restructuring of location messages and introduction
78	! of additional debug messages
79	!
80	! 3880 2019 -04-08 21:43:02Z knoop
81	! Add a call for salsa_prognostic_equations
82	!
83	! 3840 2019-03-29 10:35:52Z knoop
84	! bugfix: intent of dummy arguments changed to inout
85	!
86	! 3770 2019-02-28 11:22:32Z moh.hefny
87	! removed unused variables in module_interface_check_data_output_ts
88	!
89	! 3767 08:18:02Z raasch
90	! unused variable file_index removed from subroutine parameter list
91	!
92	! 3766 2019-02-26 16:23:41Z raasch
93	! first argument removed from module_interface_rrd_*, statement added to avoid
94	! compiler warning about unused variable, file reformatted with respect to coding
95	! standards
96	!
97	! 3762 2019-02-25 16:54:16Z suehring
98	! only pass required arguments to surface_data_output_rrd_local
99	!
100	! 3747 2019-02-16 15:15:23Z gronemeier
101	! Call user_init_arrays
102	!
103	! 3745 2019-02-15 18:57:56Z suehring
104	! Add indoor model
105	!
106	! 3744 2019-02-15 18:38:58Z suehring
107	! Removed bio_check_parameters as the method is empty.
108	!
109	! 3735 2019-02-12 09:52:40Z dom_dwd_user
110	! Accepting variable j from check_parameters and passing it to
111	! bio_check_data_output
112	! Add required restart data for surface output module
113	!
114	! 3731 2019-02-11 13:06:27Z suehring
115	! Add check_parameters routine for virtual measurements
116	!
117	! 3711 2019-01-31 13:44:26Z knoop
118	! Introduced module_interface_init_checks for post-init checks
119	!
120	! 3705 2019-01-29 19:56:39Z suehring
121	! Add last_actions for virtual measurements
122	!
123	! 3704 2019-01-29 19:51:41Z suehring
124	! Some interface calls moved to module_interface + cleanup
125	!
126	! 3684 2019-01-20 20:20:58Z knoop
127	! Bugfix: made unit intend INOUT
128	!
129	! 3650 2019-01-04 13:01:33Z kanani
130	! Add restart routines for biometeorology
131	!
132	! 3649 2019-01-02 16:52:21Z suehring
133	! Initialize strings, in order to avoid compiler warnings for non-initialized
134	! characters with intent(out) attribute
135	!
136	! 3648 2019-01-02 16:35:46Z suehring
137	! 3641 2018-12-23 22:10:01Z knoop
138	! Initial implementation of the PALM module interface
139	!
140	!
141	! Description:
142	! ------------
143	!> This is the interface between the PALM model core and all its modules.
144	!>
145	!> @todo Re-format module to be consistent with coding standard
146	!------------------------------------------------------------------------------!
147	MODULE module_interface
148
149	USE indices, &
150	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
151
152	USE kinds
153
154	!
155	!-- load module-specific control parameters.
156	!-- ToDo: move all of them to respective module or a dedicated central module
157
158	USE dynamics_mod, &
159	ONLY: dynamics_parin, &
160	dynamics_check_parameters, &
161	dynamics_check_data_output_ts, &
162	dynamics_check_data_output_pr, &
163	dynamics_check_data_output, &
164	dynamics_init_masks, &
165	dynamics_define_netcdf_grid, &
166	dynamics_init_arrays, &
167	dynamics_init, &
168	dynamics_init_checks, &
169	dynamics_header, &
170	dynamics_actions, &
171	dynamics_non_advective_processes, &
172	dynamics_exchange_horiz, &
173	dynamics_prognostic_equations, &
174	dynamics_swap_timelevel, &
175	dynamics_3d_data_averaging, &
176	dynamics_data_output_2d, &
177	dynamics_data_output_3d, &
178	dynamics_statistics, &
179	dynamics_rrd_global, &
180	dynamics_rrd_local, &
181	dynamics_wrd_global, &
182	dynamics_wrd_local, &
183	dynamics_last_actions
184
185	USE turbulence_closure_mod, &
186	ONLY: tcm_check_parameters, &
187	tcm_check_data_output, &
188	tcm_init_arrays, &
189	tcm_init, &
190	tcm_actions, &
191	tcm_prognostic_equations, &
192	tcm_swap_timelevel, &
193	tcm_3d_data_averaging, &
194	tcm_data_output_2d, &
195	tcm_data_output_3d
196
197	USE control_parameters, &
198	ONLY: air_chemistry, &
199	biometeorology, &
200	debug_output, &
201	debug_output_timestep, &
202	indoor_model, &
203	land_surface, &
204	large_scale_forcing, &
205	nesting_offline, &
206	nudging, &
207	ocean_mode, &
208	plant_canopy, &
209	salsa, &
210	surface_output, &
211	syn_turb_gen, &
212	urban_surface, &
213	vdi_checks, &
214	virtual_flight, &
215	virtual_measurement, &
216	wind_turbine
217
218	!
219	!-- load interface routines of all PALM modules
220	USE biometeorology_mod, &
221	ONLY: bio_parin, &
222	bio_check_data_output, &
223	bio_init, &
224	bio_init_checks, &
225	bio_header, &
226	bio_3d_data_averaging, &
227	bio_data_output_2d, &
228	bio_data_output_3d, &
229	bio_rrd_global, &
230	bio_rrd_local, &
231	bio_wrd_global, &
232	bio_wrd_local
233
234	USE bulk_cloud_model_mod, &
235	ONLY: bulk_cloud_model, &
236	bcm_parin, &
237	bcm_check_parameters, &
238	bcm_check_data_output_pr, &
239	bcm_check_data_output, &
240	bcm_init_arrays, &
241	bcm_init, &
242	bcm_header, &
243	bcm_actions, &
244	bcm_non_advective_processes, &
245	bcm_exchange_horiz, &
246	bcm_prognostic_equations, &
247	bcm_swap_timelevel, &
248	bcm_3d_data_averaging, &
249	bcm_data_output_2d, &
250	bcm_data_output_3d, &
251	bcm_rrd_global, &
252	bcm_wrd_global, &
253	bcm_rrd_local, &
254	bcm_wrd_local
255
256	USE chemistry_model_mod, &
257	ONLY: chem_parin, &
258	chem_check_parameters, &
259	chem_check_data_output_pr, &
260	chem_check_data_output, &
261	chem_exchange_horiz_bounds, &
262	chem_init_arrays, &
263	chem_init, &
264	chem_header, &
265	chem_actions, &
266	chem_non_advective_processes, &
267	chem_prognostic_equations, &
268	chem_swap_timelevel, &
269	chem_3d_data_averaging, &
270	chem_data_output_2d, &
271	chem_data_output_3d, &
272	chem_statistics, &
273	chem_rrd_local, &
274	chem_wrd_local
275
276	USE diagnostic_output_quantities_mod, &
277	ONLY: doq_3d_data_averaging, &
278	doq_check_data_output, &
279	doq_define_netcdf_grid, &
280	doq_init, &
281	doq_output_2d, &
282	doq_output_3d, &
283	doq_wrd_local
284	! doq_rrd_local, &
285
286	USE flight_mod, &
287	ONLY: flight_parin, &
288	flight_header, &
289	flight_init, &
290	flight_rrd_global, &
291	flight_wrd_global
292
293	USE gust_mod, &
294	ONLY: gust_module_enabled, &
295	gust_parin, &
296	gust_check_parameters, &
297	gust_check_data_output_pr, &
298	gust_check_data_output, &
299	gust_init_arrays, &
300	gust_init, &
301	gust_header, &
302	gust_actions, &
303	gust_prognostic_equations, &
304	gust_swap_timelevel, &
305	gust_3d_data_averaging, &
306	gust_data_output_2d, &
307	gust_data_output_3d, &
308	gust_statistics, &
309	gust_rrd_global, &
310	gust_wrd_global, &
311	gust_rrd_local, &
312	gust_wrd_local
313
314	USE indoor_model_mod, &
315	ONLY: im_parin, &
316	im_check_data_output, &
317	im_check_parameters, &
318	im_data_output_3d, &
319	im_init
320
321	USE lagrangian_particle_model_mod, &
322	ONLY: lpm_parin, &
323	lpm_header, &
324	lpm_check_parameters, &
325	lpm_init_arrays, &
326	lpm_init, &
327	lpm_actions, &
328	lpm_rrd_global, &
329	lpm_rrd_local, &
330	lpm_wrd_local, &
331	lpm_wrd_global
332
333	USE land_surface_model_mod, &
334	ONLY: lsm_parin, &
335	lsm_check_parameters, &
336	lsm_check_data_output_pr, &
337	lsm_check_data_output, &
338	lsm_init_arrays, &
339	lsm_init, &
340	lsm_header, &
341	lsm_swap_timelevel, &
342	lsm_3d_data_averaging, &
343	lsm_data_output_2d, &
344	lsm_rrd_local, &
345	lsm_wrd_local
346
347	USE lsf_nudging_mod, &
348	ONLY: lsf_nudging_check_parameters, &
349	lsf_nudging_check_data_output_pr, &
350	lsf_init, &
351	nudge_init, &
352	lsf_nudging_header
353
354	USE multi_agent_system_mod, &
355	ONLY: mas_parin
356
357	USE nesting_offl_mod, &
358	ONLY: nesting_offl_parin, &
359	nesting_offl_check_parameters, &
360	nesting_offl_header
361
362	USE ocean_mod, &
363	ONLY: ocean_parin, &
364	ocean_check_parameters, &
365	ocean_check_data_output_pr, &
366	ocean_check_data_output, &
367	ocean_init_arrays, &
368	ocean_init, &
369	ocean_header, &
370	ocean_actions, &
371	ocean_prognostic_equations, &
372	ocean_swap_timelevel, &
373	ocean_3d_data_averaging, &
374	ocean_data_output_2d, &
375	ocean_data_output_3d, &
376	ocean_rrd_global, &
377	ocean_wrd_global, &
378	ocean_rrd_local, &
379	ocean_wrd_local
380
381	USE particle_attributes, &
382	ONLY: particle_advection
383
384	USE plant_canopy_model_mod, &
385	ONLY: pcm_parin, &
386	pcm_check_parameters, &
387	pcm_check_data_output, &
388	pcm_init, &
389	pcm_header, &
390	pcm_3d_data_averaging, &
391	pcm_data_output_3d
392
393	USE radiation_model_mod, &
394	ONLY: radiation, &
395	radiation_parin, &
396	radiation_check_parameters, &
397	radiation_check_data_output_ts, &
398	radiation_check_data_output_pr, &
399	radiation_check_data_output, &
400	radiation_init, &
401	radiation_header, &
402	radiation_3d_data_averaging, &
403	radiation_data_output_2d, &
404	radiation_data_output_3d, &
405	radiation_rrd_local, &
406	radiation_wrd_local
407
408	USE salsa_mod, &
409	ONLY: salsa_parin, &
410	salsa_check_parameters, &
411	salsa_check_data_output_pr, &
412	salsa_check_data_output, &
413	salsa_init_arrays, &
414	salsa_init, &
415	salsa_header, &
416	salsa_actions, &
417	salsa_non_advective_processes, &
418	salsa_exchange_horiz_bounds, &
419	salsa_prognostic_equations, &
420	salsa_swap_timelevel, &
421	salsa_3d_data_averaging, &
422	salsa_data_output_2d, &
423	salsa_data_output_3d, &
424	salsa_statistics, &
425	salsa_rrd_local, &
426	salsa_wrd_local
427
428	USE spectra_mod, &
429	ONLY: calculate_spectra, &
430	spectra_parin, &
431	spectra_check_parameters, &
432	spectra_header
433
434	USE surface_data_output_mod, &
435	ONLY: surface_data_output_parin, &
436	surface_data_output_check_parameters, &
437	surface_data_output_init_arrays, &
438	surface_data_output_rrd_local, &
439	surface_data_output_rrd_global, &
440	surface_data_output_wrd_local, &
441	surface_data_output_wrd_global
442
443	USE synthetic_turbulence_generator_mod, &
444	ONLY: stg_parin, &
445	stg_check_parameters, &
446	stg_header, &
447	stg_rrd_global, &
448	stg_wrd_global
449
450	USE urban_surface_mod, &
451	ONLY: usm_parin, &
452	usm_check_parameters, &
453	usm_check_data_output, &
454	usm_init_arrays, &
455	usm_init, &
456	usm_swap_timelevel, &
457	usm_3d_data_averaging, &
458	usm_rrd_local, &
459	usm_wrd_local
460
461	USE vdi_internal_controls, &
462	ONLY: vdi_actions
463
464	USE virtual_measurement_mod, &
465	ONLY: vm_check_parameters, &
466	vm_init, &
467	vm_last_actions, &
468	vm_parin
469
470	USE wind_turbine_model_mod, &
471	ONLY: wtm_parin, &
472	wtm_check_parameters, &
473	wtm_init_arrays, &
474	wtm_init, &
475	wtm_actions, &
476	wtm_rrd_global, &
477	wtm_wrd_global
478
479	USE user, &
480	ONLY: user_module_enabled, &
481	user_parin, &
482	user_check_parameters, &
483	user_check_data_output_ts, &
484	user_check_data_output_pr, &
485	user_check_data_output, &
486	user_init, &
487	user_init_arrays, &
488	user_header, &
489	user_actions, &
490	user_3d_data_averaging, &
491	user_data_output_2d, &
492	user_data_output_3d, &
493	user_statistics, &
494	user_rrd_global, &
495	user_rrd_local, &
496	user_wrd_global, &
497	user_wrd_local, &
498	user_last_actions
499
500	IMPLICIT NONE
501
502	PRIVATE
503
504	!
505	!-- Public functions
506	PUBLIC &
507	module_interface_parin, &
508	module_interface_check_parameters, &
509	module_interface_check_data_output_ts, &
510	module_interface_check_data_output_pr, &
511	module_interface_check_data_output, &
512	module_interface_init_masks, &
513	module_interface_define_netcdf_grid, &
514	module_interface_init_arrays, &
515	module_interface_init, &
516	module_interface_init_checks, &
517	module_interface_header, &
518	module_interface_actions, &
519	module_interface_non_advective_processes, &
520	module_interface_exchange_horiz, &
521	module_interface_prognostic_equations, &
522	module_interface_swap_timelevel, &
523	module_interface_3d_data_averaging, &
524	module_interface_data_output_2d, &
525	module_interface_data_output_3d, &
526	module_interface_statistics, &
527	module_interface_rrd_global, &
528	module_interface_wrd_global, &
529	module_interface_rrd_local, &
530	module_interface_wrd_local, &
531	module_interface_last_actions
532
533
534	INTERFACE module_interface_parin
535	MODULE PROCEDURE module_interface_parin
536	END INTERFACE module_interface_parin
537
538	INTERFACE module_interface_check_parameters
539	MODULE PROCEDURE module_interface_check_parameters
540	END INTERFACE module_interface_check_parameters
541
542	INTERFACE module_interface_check_data_output_ts
543	MODULE PROCEDURE module_interface_check_data_output_ts
544	END INTERFACE module_interface_check_data_output_ts
545
546	INTERFACE module_interface_check_data_output_pr
547	MODULE PROCEDURE module_interface_check_data_output_pr
548	END INTERFACE module_interface_check_data_output_pr
549
550	INTERFACE module_interface_check_data_output
551	MODULE PROCEDURE module_interface_check_data_output
552	END INTERFACE module_interface_check_data_output
553
554	INTERFACE module_interface_init_masks
555	MODULE PROCEDURE module_interface_init_masks
556	END INTERFACE module_interface_init_masks
557
558	INTERFACE module_interface_define_netcdf_grid
559	MODULE PROCEDURE module_interface_define_netcdf_grid
560	END INTERFACE module_interface_define_netcdf_grid
561
562	INTERFACE module_interface_init_arrays
563	MODULE PROCEDURE module_interface_init_arrays
564	END INTERFACE module_interface_init_arrays
565
566	INTERFACE module_interface_init
567	MODULE PROCEDURE module_interface_init
568	END INTERFACE module_interface_init
569
570	INTERFACE module_interface_init_checks
571	MODULE PROCEDURE module_interface_init_checks
572	END INTERFACE module_interface_init_checks
573
574	INTERFACE module_interface_header
575	MODULE PROCEDURE module_interface_header
576	END INTERFACE module_interface_header
577
578	INTERFACE module_interface_actions
579	MODULE PROCEDURE module_interface_actions
580	MODULE PROCEDURE module_interface_actions_ij
581	END INTERFACE module_interface_actions
582
583	INTERFACE module_interface_non_advective_processes
584	MODULE PROCEDURE module_interface_non_advective_processes
585	MODULE PROCEDURE module_interface_non_advective_processes_ij
586	END INTERFACE module_interface_non_advective_processes
587
588	INTERFACE module_interface_exchange_horiz
589	MODULE PROCEDURE module_interface_exchange_horiz
590	END INTERFACE module_interface_exchange_horiz
591
592	INTERFACE module_interface_prognostic_equations
593	MODULE PROCEDURE module_interface_prognostic_equations
594	MODULE PROCEDURE module_interface_prognostic_equations_ij
595	END INTERFACE module_interface_prognostic_equations
596
597	INTERFACE module_interface_swap_timelevel
598	MODULE PROCEDURE module_interface_swap_timelevel
599	END INTERFACE module_interface_swap_timelevel
600
601	INTERFACE module_interface_3d_data_averaging
602	MODULE PROCEDURE module_interface_3d_data_averaging
603	END INTERFACE module_interface_3d_data_averaging
604
605	INTERFACE module_interface_data_output_2d
606	MODULE PROCEDURE module_interface_data_output_2d
607	END INTERFACE module_interface_data_output_2d
608
609	INTERFACE module_interface_data_output_3d
610	MODULE PROCEDURE module_interface_data_output_3d
611	END INTERFACE module_interface_data_output_3d
612
613	INTERFACE module_interface_statistics
614	MODULE PROCEDURE module_interface_statistics
615	END INTERFACE module_interface_statistics
616
617	INTERFACE module_interface_rrd_global
618	MODULE PROCEDURE module_interface_rrd_global
619	END INTERFACE module_interface_rrd_global
620
621	INTERFACE module_interface_wrd_global
622	MODULE PROCEDURE module_interface_wrd_global
623	END INTERFACE module_interface_wrd_global
624
625	INTERFACE module_interface_rrd_local
626	MODULE PROCEDURE module_interface_rrd_local
627	END INTERFACE module_interface_rrd_local
628
629	INTERFACE module_interface_wrd_local
630	MODULE PROCEDURE module_interface_wrd_local
631	END INTERFACE module_interface_wrd_local
632
633	INTERFACE module_interface_last_actions
634	MODULE PROCEDURE module_interface_last_actions
635	END INTERFACE module_interface_last_actions
636
637
638	CONTAINS
639
640
641	!------------------------------------------------------------------------------!
642	! Description:
643	! ------------
644	!> Read module-specific parameter namelists
645	!------------------------------------------------------------------------------!
646	SUBROUTINE module_interface_parin
647
648
649	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
650
651	CALL dynamics_parin
652
653	CALL bio_parin
654	CALL bcm_parin
655	CALL chem_parin
656	CALL flight_parin ! ToDo: rename module to match filename
657	CALL gust_parin
658	CALL im_parin
659	CALL lpm_parin
660	CALL lsm_parin
661	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
662	CALL mas_parin
663	CALL nesting_offl_parin
664	CALL ocean_parin
665	CALL pcm_parin
666	CALL radiation_parin
667	CALL salsa_parin
668	CALL spectra_parin
669	CALL surface_data_output_parin
670	CALL stg_parin
671	CALL usm_parin
672	CALL vm_parin
673	CALL wtm_parin
674
675	CALL user_parin
676
677	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
678
679
680	END SUBROUTINE module_interface_parin
681
682
683	!------------------------------------------------------------------------------!
684	! Description:
685	! ------------
686	!> Perform module-specific initialization checks
687	!------------------------------------------------------------------------------!
688	SUBROUTINE module_interface_check_parameters
689
690
691	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
692
693	CALL dynamics_check_parameters
694	CALL tcm_check_parameters
695
696	IF ( bulk_cloud_model ) CALL bcm_check_parameters
697	IF ( air_chemistry ) CALL chem_check_parameters
698	IF ( gust_module_enabled ) CALL gust_check_parameters
699	IF ( indoor_model ) CALL im_check_parameters
700	IF ( particle_advection ) CALL lpm_check_parameters
701	IF ( land_surface ) CALL lsm_check_parameters
702	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
703	IF ( nesting_offline ) CALL nesting_offl_check_parameters
704	IF ( ocean_mode ) CALL ocean_check_parameters
705	IF ( plant_canopy ) CALL pcm_check_parameters
706	IF ( radiation ) CALL radiation_check_parameters
707	IF ( salsa ) CALL salsa_check_parameters
708	IF ( calculate_spectra ) CALL spectra_check_parameters
709	IF ( surface_output ) CALL surface_data_output_check_parameters
710	IF ( syn_turb_gen ) CALL stg_check_parameters
711	IF ( urban_surface ) CALL usm_check_parameters
712	IF ( virtual_measurement ) CALL vm_check_parameters
713	IF ( wind_turbine ) CALL wtm_check_parameters
714
715	IF ( user_module_enabled ) CALL user_check_parameters
716
717	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
718
719
720	END SUBROUTINE module_interface_check_parameters
721
722
723	!------------------------------------------------------------------------------!
724	! Description:
725	! ------------
726	!> Check module-specific data output of timeseries
727	!------------------------------------------------------------------------------!
728	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
729
730
731	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
732	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
733	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
734	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
735
736
737	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
738
739	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
740
741	IF ( radiation ) THEN
742	CALL radiation_check_data_output_ts( dots_max, dots_num )
743	ENDIF
744
745	IF ( user_module_enabled ) THEN
746	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
747	ENDIF
748
749	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
750
751
752	END SUBROUTINE module_interface_check_data_output_ts
753
754
755	!------------------------------------------------------------------------------!
756	! Description:
757	! ------------
758	!> Check module-specific data output of profiles
759	!------------------------------------------------------------------------------!
760	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
761	dopr_unit )
762
763
764	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
765	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
766	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
767	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
768
769
770	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
771
772	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
773
774	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
775	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
776	ENDIF
777
778	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
779	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
780	ENDIF
781
782	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
783	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
784	ENDIF
785
786	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
787	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
788	ENDIF
789
790	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
791	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
792	ENDIF
793
794	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
795	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
796	ENDIF
797
798	IF ( unit == 'illegal' .AND. radiation ) THEN
799	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
800	ENDIF
801
802	IF ( unit == 'illegal' .AND. salsa ) THEN
803	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
804	ENDIF
805
806	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
807	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
808	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
809	ENDIF
810
811	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
812
813
814	END SUBROUTINE module_interface_check_data_output_pr
815
816	!------------------------------------------------------------------------------!
817	! Description:
818	! ------------
819	!> Check module-specific 2D and 3D data output
820	!------------------------------------------------------------------------------!
821	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
822
823
824	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
825	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
826
827	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
828	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
829	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
830	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
831
832
833	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
834
835	CALL dynamics_check_data_output( variable, unit )
836
837	CALL tcm_check_data_output( variable, unit )
838
839	IF ( unit == 'illegal' .AND. biometeorology ) THEN
840	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
841	ENDIF
842
843	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
844	CALL bcm_check_data_output( variable, unit )
845	ENDIF
846
847	IF ( unit == 'illegal' .AND. air_chemistry &
848	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
849	CALL chem_check_data_output( variable, unit, i, ilen, k )
850	ENDIF
851
852	IF ( unit == 'illegal' ) THEN
853	CALL doq_check_data_output( variable, unit )
854	ENDIF
855
856	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
857	CALL gust_check_data_output( variable, unit )
858	ENDIF
859
860	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
861	CALL lsm_check_data_output( variable, unit, i, ilen, k )
862	ENDIF
863
864	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
865	CALL ocean_check_data_output( variable, unit )
866	ENDIF
867
868	IF ( unit == 'illegal' .AND. plant_canopy &
869	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
870	CALL pcm_check_data_output( variable, unit )
871	ENDIF
872
873	IF ( unit == 'illegal' .AND. radiation ) THEN
874	CALL radiation_check_data_output( variable, unit, i, ilen, k )
875	ENDIF
876
877	IF ( unit == 'illegal' .AND. salsa ) THEN
878	CALL salsa_check_data_output( variable, unit )
879	ENDIF
880
881	IF ( unit == 'illegal' .AND. indoor_model ) THEN
882	CALL im_check_data_output( variable, unit )
883	ENDIF
884
885	IF ( unit == 'illegal' .AND. urban_surface &
886	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
887	CALL usm_check_data_output( variable, unit )
888	ENDIF
889
890	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
891	unit = ''
892	CALL user_check_data_output( variable, unit )
893	ENDIF
894
895	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
896
897
898	END SUBROUTINE module_interface_check_data_output
899
900
901	!------------------------------------------------------------------------------!
902	!
903	! Description:
904	! ------------
905	!> Interface for init_masks. ToDo: get rid of these redundant calls!
906	!------------------------------------------------------------------------------!
907	SUBROUTINE module_interface_init_masks( variable, unit )
908
909
910	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
911	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
912
913
914	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
915
916	CALL dynamics_init_masks( variable, unit )
917
918	IF ( unit == 'illegal' .AND. air_chemistry &
919	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
920	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
921	ENDIF
922
923	IF ( unit == 'illegal' ) THEN
924	CALL doq_check_data_output( variable, unit )
925	ENDIF
926
927	IF ( unit == 'illegal' .AND. radiation ) THEN
928	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
929	ENDIF
930
931	IF ( unit == 'illegal' .AND. salsa ) THEN
932	CALL salsa_check_data_output( variable, unit )
933	ENDIF
934
935	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
936	unit = ''
937	CALL user_check_data_output( variable, unit )
938	ENDIF
939
940	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
941
942
943	END SUBROUTINE module_interface_init_masks
944
945
946	!------------------------------------------------------------------------------!
947	!
948	! Description:
949	! ------------
950	!> Define appropriate grid for module-specific netcdf output variables.
951	!------------------------------------------------------------------------------!
952	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
953	grid_x, grid_y, grid_z )
954
955
956	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
957	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
958	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
959	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
960	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
961
962
963	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
964	!
965	!-- As long as no action is done in this subroutine, initialize strings with
966	!-- intent(out) attribute, in order to avoid compiler warnings.
967	found = .FALSE.
968	grid_x = 'none'
969	grid_y = 'none'
970	grid_z = 'none'
971	!
972	!-- Use var to avoid compiler warning about unused variable
973	IF ( var == ' ' ) RETURN
974
975	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
976
977
978	END SUBROUTINE module_interface_define_netcdf_grid
979
980
981	!------------------------------------------------------------------------------!
982	! Description:
983	! ------------
984	!> Allocate module-specific arrays and pointers
985	!------------------------------------------------------------------------------!
986	SUBROUTINE module_interface_init_arrays
987
988
989	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
990
991	CALL dynamics_init_arrays
992	CALL tcm_init_arrays
993
994	IF ( bulk_cloud_model ) CALL bcm_init_arrays
995	IF ( air_chemistry ) CALL chem_init_arrays
996	IF ( gust_module_enabled ) CALL gust_init_arrays
997	IF ( particle_advection ) CALL lpm_init_arrays
998	IF ( land_surface ) CALL lsm_init_arrays
999	IF ( ocean_mode ) CALL ocean_init_arrays
1000	IF ( salsa ) CALL salsa_init_arrays
1001	IF ( urban_surface ) CALL usm_init_arrays
1002	IF ( surface_output ) CALL surface_data_output_init_arrays
1003	IF ( wind_turbine ) CALL wtm_init_arrays
1004
1005	IF ( user_module_enabled ) CALL user_init_arrays
1006
1007	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1008
1009
1010	END SUBROUTINE module_interface_init_arrays
1011
1012
1013	!------------------------------------------------------------------------------!
1014	! Description:
1015	! ------------
1016	!> Perform module-specific initialization
1017	!------------------------------------------------------------------------------!
1018	SUBROUTINE module_interface_init
1019
1020
1021	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1022
1023	CALL dynamics_init
1024	CALL tcm_init
1025
1026	IF ( biometeorology ) CALL bio_init
1027	IF ( bulk_cloud_model ) CALL bcm_init
1028	IF ( air_chemistry ) CALL chem_init
1029	IF ( virtual_flight ) CALL flight_init
1030	IF ( gust_module_enabled ) CALL gust_init
1031	IF ( indoor_model ) CALL im_init
1032	IF ( particle_advection ) CALL lpm_init
1033	IF ( large_scale_forcing ) CALL lsf_init
1034	IF ( land_surface ) CALL lsm_init
1035	IF ( nudging ) CALL nudge_init
1036	IF ( ocean_mode ) CALL ocean_init
1037	IF ( plant_canopy ) CALL pcm_init
1038	IF ( salsa ) CALL salsa_init
1039	IF ( urban_surface ) CALL usm_init
1040	IF ( virtual_measurement ) CALL vm_init
1041	IF ( wind_turbine ) CALL wtm_init
1042	IF ( radiation ) CALL radiation_init
1043
1044	CALL doq_init
1045
1046	IF ( user_module_enabled ) CALL user_init
1047
1048	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1049
1050
1051	END SUBROUTINE module_interface_init
1052
1053
1054	!------------------------------------------------------------------------------!
1055	! Description:
1056	! ------------
1057	!> Perform module-specific post-initialization checks
1058	!------------------------------------------------------------------------------!
1059	SUBROUTINE module_interface_init_checks
1060
1061
1062	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1063
1064	CALL dynamics_init_checks
1065
1066	IF ( biometeorology ) CALL bio_init_checks
1067
1068	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1069
1070
1071	END SUBROUTINE module_interface_init_checks
1072
1073
1074	!------------------------------------------------------------------------------!
1075	! Description:
1076	! ------------
1077	!> Gather module-specific header output
1078	!------------------------------------------------------------------------------!
1079	SUBROUTINE module_interface_header( io )
1080
1081
1082	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1083
1084
1085	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1086
1087	CALL dynamics_header( io )
1088
1089	IF ( biometeorology ) CALL bio_header ( io )
1090	IF ( bulk_cloud_model ) CALL bcm_header( io )
1091	IF ( air_chemistry ) CALL chem_header ( io )
1092	IF ( virtual_flight ) CALL flight_header( io )
1093	IF ( gust_module_enabled ) CALL gust_header( io )
1094	IF ( particle_advection ) CALL lpm_header( io )
1095	IF ( land_surface ) CALL lsm_header( io )
1096	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1097	IF ( nesting_offline ) CALL nesting_offl_header( io )
1098	IF ( ocean_mode ) CALL ocean_header( io )
1099	IF ( plant_canopy ) CALL pcm_header( io )
1100	IF ( radiation ) CALL radiation_header( io )
1101	IF ( salsa ) CALL salsa_header( io )
1102	IF ( calculate_spectra ) CALL spectra_header( io )
1103	IF ( syn_turb_gen ) CALL stg_header( io )
1104
1105	IF ( user_module_enabled ) CALL user_header( io )
1106
1107	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1108
1109
1110	END SUBROUTINE module_interface_header
1111
1112
1113	!------------------------------------------------------------------------------!
1114	! Description:
1115	! ------------
1116	!> Perform module-specific actions while in time-integration (vector-optimized)
1117	!------------------------------------------------------------------------------!
1118	SUBROUTINE module_interface_actions( location )
1119
1120
1121	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1122
1123	CALL dynamics_actions( location )
1124	CALL tcm_actions( location )
1125
1126	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1127	IF ( air_chemistry ) CALL chem_actions( location )
1128	IF ( gust_module_enabled ) CALL gust_actions( location )
1129	IF ( particle_advection ) CALL lpm_actions( location )
1130	IF ( ocean_mode ) CALL ocean_actions( location )
1131	IF ( salsa ) CALL salsa_actions( location )
1132	IF ( wind_turbine ) CALL wtm_actions( location )
1133
1134	IF ( user_module_enabled ) CALL user_actions( location )
1135	IF ( vdi_checks ) CALL vdi_actions( location )
1136
1137
1138	END SUBROUTINE module_interface_actions
1139
1140
1141	!------------------------------------------------------------------------------!
1142	! Description:
1143	! ------------
1144	!> Perform module-specific actions while in time-integration (cache-optimized)
1145	!------------------------------------------------------------------------------!
1146	SUBROUTINE module_interface_actions_ij( i, j, location )
1147
1148
1149	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1150	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1151	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1152
1153	CALL dynamics_actions( i, j, location )
1154	CALL tcm_actions( i, j, location )
1155
1156	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1157	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1158	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1159	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1160	IF ( salsa ) CALL salsa_actions( i, j, location )
1161	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1162
1163	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1164
1165
1166	END SUBROUTINE module_interface_actions_ij
1167
1168
1169	!------------------------------------------------------------------------------!
1170	! Description:
1171	! ------------
1172	!> Compute module-specific non_advective_processes (vector-optimized)
1173	!------------------------------------------------------------------------------!
1174	SUBROUTINE module_interface_non_advective_processes
1175
1176
1177	CALL dynamics_non_advective_processes
1178
1179	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1180	IF ( air_chemistry ) CALL chem_non_advective_processes
1181	IF ( salsa ) CALL salsa_non_advective_processes
1182
1183
1184	END SUBROUTINE module_interface_non_advective_processes
1185
1186
1187	!------------------------------------------------------------------------------!
1188	! Description:
1189	! ------------
1190	!> Compute module-specific non_advective_processes (cache-optimized)
1191	!------------------------------------------------------------------------------!
1192	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1193
1194
1195	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1196	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1197
1198	CALL dynamics_non_advective_processes( i, j )
1199
1200	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1201	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1202	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1203
1204
1205	END SUBROUTINE module_interface_non_advective_processes_ij
1206
1207	!------------------------------------------------------------------------------!
1208	! Description:
1209	! ------------
1210	!> Exchange horiz for module-specific quantities
1211	!------------------------------------------------------------------------------!
1212	SUBROUTINE module_interface_exchange_horiz
1213
1214
1215	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1216
1217	CALL dynamics_exchange_horiz
1218
1219	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1220	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1221	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1222
1223	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1224
1225
1226	END SUBROUTINE module_interface_exchange_horiz
1227
1228
1229	!------------------------------------------------------------------------------!
1230	! Description:
1231	! ------------
1232	!> Compute module-specific prognostic_equations (vector-optimized)
1233	!------------------------------------------------------------------------------!
1234	SUBROUTINE module_interface_prognostic_equations
1235
1236
1237	CALL dynamics_prognostic_equations
1238	CALL tcm_prognostic_equations
1239
1240	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1241	IF ( air_chemistry ) CALL chem_prognostic_equations
1242	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1243	IF ( ocean_mode ) CALL ocean_prognostic_equations
1244	IF ( salsa ) CALL salsa_prognostic_equations
1245
1246
1247	END SUBROUTINE module_interface_prognostic_equations
1248
1249
1250	!------------------------------------------------------------------------------!
1251	! Description:
1252	! ------------
1253	!> Compute module-specific prognostic_equations (cache-optimized)
1254	!------------------------------------------------------------------------------!
1255	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1256
1257
1258	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1259	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1260	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1261	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1262
1263	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1264	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1265
1266	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1267	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1268	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1269	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1270	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1271
1272
1273	END SUBROUTINE module_interface_prognostic_equations_ij
1274
1275
1276	!------------------------------------------------------------------------------!
1277	! Description:
1278	! ------------
1279	!> Swap the timelevel pointers for module-specific arrays
1280	!------------------------------------------------------------------------------!
1281	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1282
1283
1284	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1285
1286
1287	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1288
1289	CALL dynamics_swap_timelevel( swap_mode )
1290	CALL tcm_swap_timelevel( swap_mode )
1291
1292	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1293	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1294	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1295	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1296	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1297	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1298	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1299
1300	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1301
1302
1303	END SUBROUTINE module_interface_swap_timelevel
1304
1305
1306	!------------------------------------------------------------------------------!
1307	!
1308	! Description:
1309	! ------------
1310	!> Perform module-specific averaging of 3D data
1311	!------------------------------------------------------------------------------!
1312	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1313
1314
1315	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1316	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1317
1318
1319	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1320
1321	CALL dynamics_3d_data_averaging( mode, variable )
1322	CALL tcm_3d_data_averaging( mode, variable )
1323
1324	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1325	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1326	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1327	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1328	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1329	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1330	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1331	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1332	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1333	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1334	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1335
1336	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1337
1338	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1339
1340
1341	END SUBROUTINE module_interface_3d_data_averaging
1342
1343	!------------------------------------------------------------------------------!
1344	!
1345	! Description:
1346	! ------------
1347	!> Define module-specific 2D output variables
1348	!------------------------------------------------------------------------------!
1349	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1350	local_pf, two_d, nzb_do, nzt_do, &
1351	fill_value )
1352
1353	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1354	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1355	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1356	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1357	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1358	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1359	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1360	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1361	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1362
1363	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1364
1365
1366	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1367
1368	CALL dynamics_data_output_2d( &
1369	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1370	)
1371
1372	IF ( .NOT. found ) THEN
1373	CALL tcm_data_output_2d( &
1374	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1375	)
1376	ENDIF
1377
1378	IF ( .NOT. found .AND. biometeorology ) THEN
1379	CALL bio_data_output_2d( &
1380	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1381	)
1382	ENDIF
1383
1384	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1385	CALL bcm_data_output_2d( &
1386	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1387	)
1388	ENDIF
1389
1390	IF ( .NOT. found .AND. air_chemistry ) THEN
1391	CALL chem_data_output_2d( &
1392	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1393	)
1394	ENDIF
1395
1396	IF ( .NOT. found ) THEN
1397	CALL doq_output_2d( &
1398	av, variable, found, grid, mode, local_pf, two_d, &
1399	nzb_do, nzt_do, fill_value )
1400	ENDIF
1401
1402	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1403	CALL gust_data_output_2d( &
1404	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1405	)
1406	ENDIF
1407
1408	IF ( .NOT. found .AND. land_surface ) THEN
1409	CALL lsm_data_output_2d( &
1410	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1411	)
1412	ENDIF
1413
1414	IF ( .NOT. found .AND. ocean_mode ) THEN
1415	CALL ocean_data_output_2d( &
1416	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1417	)
1418	ENDIF
1419
1420	IF ( .NOT. found .AND. radiation ) THEN
1421	CALL radiation_data_output_2d( &
1422	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1423	)
1424	ENDIF
1425
1426	IF ( .NOT. found .AND. salsa ) THEN
1427	CALL salsa_data_output_2d( &
1428	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1429	)
1430	ENDIF
1431
1432	IF ( .NOT. found .AND. user_module_enabled ) THEN
1433	CALL user_data_output_2d( &
1434	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1435	)
1436	ENDIF
1437
1438	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1439
1440
1441	END SUBROUTINE module_interface_data_output_2d
1442
1443
1444	!------------------------------------------------------------------------------!
1445	!
1446	! Description:
1447	! ------------
1448	!> Define module-specific 3D output variables
1449	!------------------------------------------------------------------------------!
1450	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1451	fill_value, resorted, nzb_do, nzt_do )
1452
1453
1454	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1455	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1456	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1457	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1458	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1459	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1460	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1461
1462	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1463
1464
1465	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1466
1467	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1468	resorted = .FALSE.
1469
1470	IF ( .NOT. found ) THEN
1471	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1472	resorted = .TRUE.
1473	ENDIF
1474
1475	IF ( .NOT. found .AND. biometeorology ) THEN
1476	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1477	resorted = .FALSE.
1478	ENDIF
1479
1480	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1481	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1482	resorted = .TRUE.
1483	ENDIF
1484
1485	IF ( .NOT. found .AND. air_chemistry ) THEN
1486	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1487	resorted = .TRUE.
1488	ENDIF
1489
1490	IF ( .NOT. found ) THEN
1491	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1492	resorted = .TRUE.
1493	ENDIF
1494
1495	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1496	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1497	resorted = .TRUE.
1498	ENDIF
1499
1500	IF ( .NOT. found .AND. indoor_model ) THEN
1501	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1502	resorted = .TRUE.
1503	ENDIF
1504
1505	IF ( .NOT. found .AND. ocean_mode ) THEN
1506	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1507	resorted = .TRUE.
1508	ENDIF
1509
1510	IF ( .NOT. found .AND. plant_canopy ) THEN
1511	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1512	resorted = .TRUE.
1513	ENDIF
1514
1515	IF ( .NOT. found .AND. radiation ) THEN
1516	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1517	resorted = .TRUE.
1518	ENDIF
1519
1520	IF ( .NOT. found .AND. salsa ) THEN
1521	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1522	resorted = .TRUE.
1523	ENDIF
1524
1525	IF ( .NOT. found .AND. user_module_enabled ) THEN
1526	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1527	resorted = .TRUE.
1528	ENDIF
1529
1530	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1531
1532
1533	END SUBROUTINE module_interface_data_output_3d
1534
1535
1536	!------------------------------------------------------------------------------!
1537	! Description:
1538	! ------------
1539	!> Compute module-specific profile and timeseries data
1540	!------------------------------------------------------------------------------!
1541	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1542
1543
1544	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1545	INTEGER(iwp), INTENT(IN) :: sr !<
1546	INTEGER(iwp), INTENT(IN) :: tn !<
1547	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1548
1549
1550	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1551
1552	CALL dynamics_statistics( mode, sr, tn )
1553
1554	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1555	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1556	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1557
1558	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1559
1560	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1561
1562
1563	END SUBROUTINE module_interface_statistics
1564
1565
1566	!------------------------------------------------------------------------------!
1567	! Description:
1568	! ------------
1569	!> Read module-specific restart data globaly shared by all MPI ranks
1570	!------------------------------------------------------------------------------!
1571	SUBROUTINE module_interface_rrd_global( found )
1572
1573
1574	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1575
1576
1577	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1578
1579	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1580
1581	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1582	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1583	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1584	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1585	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1586	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1587	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1588	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1589	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1590
1591	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1592
1593	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1594
1595
1596	END SUBROUTINE module_interface_rrd_global
1597
1598
1599	!------------------------------------------------------------------------------!
1600	! Description:
1601	! ------------
1602	!> Write module-specific restart data globaly shared by all MPI ranks
1603	!------------------------------------------------------------------------------!
1604	SUBROUTINE module_interface_wrd_global
1605
1606
1607	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1608
1609	CALL dynamics_wrd_global
1610
1611	IF ( biometeorology ) CALL bio_wrd_global
1612	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1613	IF ( virtual_flight ) CALL flight_wrd_global
1614	IF ( gust_module_enabled ) CALL gust_wrd_global
1615	IF ( ocean_mode ) CALL ocean_wrd_global
1616	IF ( syn_turb_gen ) CALL stg_wrd_global
1617	IF ( wind_turbine ) CALL wtm_wrd_global
1618	IF ( surface_output ) CALL surface_data_output_wrd_global
1619
1620	IF ( user_module_enabled ) CALL user_wrd_global
1621
1622	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1623
1624
1625	END SUBROUTINE module_interface_wrd_global
1626
1627
1628	!------------------------------------------------------------------------------!
1629	! Description:
1630	! ------------
1631	!> Read module-specific restart data specific to local MPI ranks
1632	!------------------------------------------------------------------------------!
1633	SUBROUTINE module_interface_rrd_local( map_index, &
1634	nxlf, nxlc, nxl_on_file, &
1635	nxrf, nxrc, nxr_on_file, &
1636	nynf, nync, nyn_on_file, &
1637	nysf, nysc, nys_on_file, &
1638	tmp_2d, tmp_3d, found )
1639
1640
1641	INTEGER(iwp), INTENT(IN) :: map_index !<
1642	INTEGER(iwp), INTENT(IN) :: nxlc !<
1643	INTEGER(iwp), INTENT(IN) :: nxlf !<
1644	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1645	INTEGER(iwp), INTENT(IN) :: nxrc !<
1646	INTEGER(iwp), INTENT(IN) :: nxrf !<
1647	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1648	INTEGER(iwp), INTENT(IN) :: nync !<
1649	INTEGER(iwp), INTENT(IN) :: nynf !<
1650	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1651	INTEGER(iwp), INTENT(IN) :: nysc !<
1652	INTEGER(iwp), INTENT(IN) :: nysf !<
1653	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1654	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1655
1656	REAL(wp), &
1657	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1658	INTENT(OUT) :: tmp_2d !<
1659	REAL(wp), &
1660	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1661	INTENT(OUT) :: tmp_3d !<
1662
1663
1664	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1665
1666	CALL dynamics_rrd_local( &
1667	map_index, &
1668	nxlf, nxlc, nxl_on_file, &
1669	nxrf, nxrc, nxr_on_file, &
1670	nynf, nync, nyn_on_file, &
1671	nysf, nysc, nys_on_file, &
1672	tmp_2d, tmp_3d, found &
1673	) ! ToDo: change interface to pass variable
1674
1675	IF ( .NOT. found ) CALL bio_rrd_local( &
1676	found &
1677	)
1678
1679	IF ( .NOT. found ) CALL bcm_rrd_local( &
1680	map_index, &
1681	nxlf, nxlc, nxl_on_file, &
1682	nxrf, nxrc, nxr_on_file, &
1683	nynf, nync, nyn_on_file, &
1684	nysf, nysc, nys_on_file, &
1685	tmp_2d, tmp_3d, found &
1686	) ! ToDo: change interface to pass variable
1687
1688	IF ( .NOT. found ) CALL chem_rrd_local( &
1689	map_index, &
1690	nxlf, nxlc, nxl_on_file, &
1691	nxrf, nxrc, nxr_on_file, &
1692	nynf, nync, nyn_on_file, &
1693	nysf, nysc, nys_on_file, &
1694	tmp_3d, found &
1695	) ! ToDo: change interface to pass variable
1696
1697	! IF ( .NOT. found ) CALL doq_rrd_local( &
1698	! map_index, &
1699	! nxlf, nxlc, nxl_on_file, &
1700	! nxrf, nxrc, nxr_on_file, &
1701	! nynf, nync, nyn_on_file, &
1702	! nysf, nysc, nys_on_file, &
1703	! tmp_3d_non_standard, found &
1704	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1705
1706	IF ( .NOT. found ) CALL gust_rrd_local( &
1707	map_index, &
1708	nxlf, nxlc, nxl_on_file, &
1709	nxrf, nxrc, nxr_on_file, &
1710	nynf, nync, nyn_on_file, &
1711	nysf, nysc, nys_on_file, &
1712	tmp_2d, tmp_3d, found &
1713	) ! ToDo: change interface to pass variable
1714
1715	IF ( .NOT. found ) CALL lpm_rrd_local( &
1716	map_index, &
1717	nxlf, nxlc, nxl_on_file, &
1718	nxrf, nxrc, nxr_on_file, &
1719	nynf, nync, nyn_on_file, &
1720	nysf, nysc, nys_on_file, &
1721	tmp_3d, found &
1722	) ! ToDo: change interface to pass variable
1723
1724	IF ( .NOT. found ) CALL lsm_rrd_local( &
1725	map_index, &
1726	nxlf, nxlc, nxl_on_file, &
1727	nxrf, nxrc, nxr_on_file, &
1728	nynf, nync, nyn_on_file, &
1729	nysf, nysc, nys_on_file, &
1730	tmp_2d, found &
1731	) ! ToDo: change interface to pass variable
1732
1733	IF ( .NOT. found ) CALL ocean_rrd_local( &
1734	map_index, &
1735	nxlf, nxlc, nxl_on_file, &
1736	nxrf, nxrc, nxr_on_file, &
1737	nynf, nync, nyn_on_file, &
1738	nysf, nysc, nys_on_file, &
1739	tmp_3d, found &
1740	) ! ToDo: change interface to pass variable
1741
1742	IF ( .NOT. found ) CALL radiation_rrd_local( &
1743	map_index, &
1744	nxlf, nxlc, nxl_on_file, &
1745	nxrf, nxrc, nxr_on_file, &
1746	nynf, nync, nyn_on_file, &
1747	nysf, nysc, nys_on_file, &
1748	tmp_2d, tmp_3d, found &
1749	) ! ToDo: change interface to pass variable
1750
1751	IF ( .NOT. found ) CALL salsa_rrd_local( &
1752	map_index, &
1753	nxlf, nxlc, nxl_on_file, &
1754	nxrf, nxrc, nxr_on_file, &
1755	nynf, nync, nyn_on_file, &
1756	nysf, nysc, nys_on_file, &
1757	tmp_3d, found &
1758	) ! ToDo: change interface to pass variable
1759
1760	IF ( .NOT. found ) CALL usm_rrd_local( &
1761	map_index, &
1762	nxlf, nxlc, nxl_on_file, &
1763	nxrf, nxr_on_file, &
1764	nynf, nyn_on_file, &
1765	nysf, nysc, nys_on_file, &
1766	found &
1767	) ! ToDo: change interface to pass variable
1768	!
1769	!-- Surface data do not need overlap data, so do not pass these information.
1770	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1771
1772	IF ( .NOT. found ) CALL user_rrd_local( &
1773	map_index, &
1774	nxlf, nxlc, nxl_on_file, &
1775	nxrf, nxrc, nxr_on_file, &
1776	nynf, nync, nyn_on_file, &
1777	nysf, nysc, nys_on_file, &
1778	tmp_3d, found &
1779	) ! ToDo: change interface to pass variable
1780
1781	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1782
1783
1784	END SUBROUTINE module_interface_rrd_local
1785
1786
1787	!------------------------------------------------------------------------------!
1788	! Description:
1789	! ------------
1790	!> Write module-specific restart data specific to local MPI ranks
1791	!------------------------------------------------------------------------------!
1792	SUBROUTINE module_interface_wrd_local
1793
1794
1795	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1796
1797	CALL dynamics_wrd_local
1798
1799	IF ( biometeorology ) CALL bio_wrd_local
1800	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1801	IF ( air_chemistry ) CALL chem_wrd_local
1802	CALL doq_wrd_local
1803	IF ( gust_module_enabled ) CALL gust_wrd_local
1804	IF ( particle_advection ) CALL lpm_wrd_local
1805	IF ( land_surface ) CALL lsm_wrd_local
1806	IF ( ocean_mode ) CALL ocean_wrd_local
1807	IF ( radiation ) CALL radiation_wrd_local
1808	IF ( salsa ) CALL salsa_wrd_local
1809	IF ( urban_surface ) CALL usm_wrd_local
1810	IF ( surface_output ) CALL surface_data_output_wrd_local
1811
1812	IF ( user_module_enabled ) CALL user_wrd_local
1813
1814	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1815
1816
1817	END SUBROUTINE module_interface_wrd_local
1818
1819
1820	!------------------------------------------------------------------------------!
1821	! Description:
1822	! ------------
1823	!> Perform module-specific last actions before the program terminates
1824	!------------------------------------------------------------------------------!
1825	SUBROUTINE module_interface_last_actions
1826
1827
1828	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1829
1830	CALL dynamics_last_actions
1831
1832	IF ( virtual_measurement ) CALL vm_last_actions
1833
1834	IF ( user_module_enabled ) CALL user_last_actions
1835
1836	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1837
1838
1839	END SUBROUTINE module_interface_last_actions
1840
1841
1842	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |