Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4174

Last change on this file since 4174 was 4173, checked in by gronemeier, 5 years ago
add vdi_internal_controls
Property svn:keywords set to `Id`
File size: 82.5 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4173 2019-08-20 12:04:06Z gronemeier $
27	! add vdi_internal_controls
28	!
29	! 4157 2019-08-14 09:19:12Z suehring
30	! Call doq_init from module interface
31	!
32	! 4132 2019-08-02 12:34:17Z suehring
33	! Bugfix in masked data output for diagnostic quantities
34	!
35	! 4131 2019-08-02 11:06:18Z monakurppa
36	! Add output of 3D plant-canopy outputs (merge from branch resler)
37	!
38	! 4048 2019-06-21 21:00:21Z knoop
39	! Moved turbulence_closure_mod calls into this module_interface
40	!
41	! 4047 2019-06-21 18:58:09Z knoop
42	! Introduction of the dynamics module
43	!
44	! 4039 2019-06-18 10:32:41Z suehring
45	! Introduce diagnostic output
46	!
47	! 4028 2019-06-13 12:21:37Z schwenkel
48	! Further modularization of particle code components
49	!
50	! 4017 2019-06-06 12:16:46Z schwenkel
51	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
52	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
53	! are not defined everywhere, e.g. land-surface outputs, this will be
54	! problematic as NaN will be output.
55	!
56	! 3987 2019-05-22 09:52:13Z kanani
57	! Introduce switchable DEBUG file output via debug_message routine
58	!
59	! 3956 2019-05-07 12:32:52Z monakurppa
60	! - Added calls for salsa_non_advective_processes and
61	! salsa_exchange_horiz_bounds
62	! - Moved the call for salsa_data_output_2d/3d before that of
63	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
64	! salsa output variable and encounters a segmentation fault for "Ntot" due
65	! to the shortoutput name
66	!
67	! 3931 2019-04-24 16:34:28Z schwenkel
68	! Changed non_transport_physics to non_advective_processes
69	!
70	! 3930 2019-04-24 14:57:18Z forkel
71	! Correct/complete module_interface introduction for chemistry model
72	!
73	! 3887 2019 -04-12 08:47:41Z schwenkel
74	! Changes related to global restructuring of location messages and introduction
75	! of additional debug messages
76	!
77	! 3880 2019 -04-08 21:43:02Z knoop
78	! Add a call for salsa_prognostic_equations
79	!
80	! 3840 2019-03-29 10:35:52Z knoop
81	! bugfix: intent of dummy arguments changed to inout
82	!
83	! 3770 2019-02-28 11:22:32Z moh.hefny
84	! removed unused variables in module_interface_check_data_output_ts
85	!
86	! 3767 08:18:02Z raasch
87	! unused variable file_index removed from subroutine parameter list
88	!
89	! 3766 2019-02-26 16:23:41Z raasch
90	! first argument removed from module_interface_rrd_*, statement added to avoid
91	! compiler warning about unused variable, file reformatted with respect to coding
92	! standards
93	!
94	! 3762 2019-02-25 16:54:16Z suehring
95	! only pass required arguments to surface_data_output_rrd_local
96	!
97	! 3747 2019-02-16 15:15:23Z gronemeier
98	! Call user_init_arrays
99	!
100	! 3745 2019-02-15 18:57:56Z suehring
101	! Add indoor model
102	!
103	! 3744 2019-02-15 18:38:58Z suehring
104	! Removed bio_check_parameters as the method is empty.
105	!
106	! 3735 2019-02-12 09:52:40Z dom_dwd_user
107	! Accepting variable j from check_parameters and passing it to
108	! bio_check_data_output
109	! Add required restart data for surface output module
110	!
111	! 3731 2019-02-11 13:06:27Z suehring
112	! Add check_parameters routine for virtual measurements
113	!
114	! 3711 2019-01-31 13:44:26Z knoop
115	! Introduced module_interface_init_checks for post-init checks
116	!
117	! 3705 2019-01-29 19:56:39Z suehring
118	! Add last_actions for virtual measurements
119	!
120	! 3704 2019-01-29 19:51:41Z suehring
121	! Some interface calls moved to module_interface + cleanup
122	!
123	! 3684 2019-01-20 20:20:58Z knoop
124	! Bugfix: made unit intend INOUT
125	!
126	! 3650 2019-01-04 13:01:33Z kanani
127	! Add restart routines for biometeorology
128	!
129	! 3649 2019-01-02 16:52:21Z suehring
130	! Initialize strings, in order to avoid compiler warnings for non-initialized
131	! characters with intent(out) attribute
132	!
133	! 3648 2019-01-02 16:35:46Z suehring
134	! Rename subroutines for surface-data output
135	!
136	! 3641 2018-12-23 22:10:01Z knoop
137	! Initial implementation of the PALM module interface
138	!
139	!
140	! Description:
141	! ------------
142	!> This is the interface between the PALM model core and all its modules.
143	!>
144	!> @todo Re-format module to be consistent with coding standard
145	!------------------------------------------------------------------------------!
146	MODULE module_interface
147
148	USE indices, &
149	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
150
151	USE kinds
152
153	!
154	!-- load module-specific control parameters.
155	!-- ToDo: move all of them to respective module or a dedicated central module
156
157	USE dynamics_mod, &
158	ONLY: dynamics_parin, &
159	dynamics_check_parameters, &
160	dynamics_check_data_output_ts, &
161	dynamics_check_data_output_pr, &
162	dynamics_check_data_output, &
163	dynamics_init_masks, &
164	dynamics_define_netcdf_grid, &
165	dynamics_init_arrays, &
166	dynamics_init, &
167	dynamics_init_checks, &
168	dynamics_header, &
169	dynamics_actions, &
170	dynamics_non_advective_processes, &
171	dynamics_exchange_horiz, &
172	dynamics_prognostic_equations, &
173	dynamics_swap_timelevel, &
174	dynamics_3d_data_averaging, &
175	dynamics_data_output_2d, &
176	dynamics_data_output_3d, &
177	dynamics_statistics, &
178	dynamics_rrd_global, &
179	dynamics_rrd_local, &
180	dynamics_wrd_global, &
181	dynamics_wrd_local, &
182	dynamics_last_actions
183
184	USE turbulence_closure_mod, &
185	ONLY: tcm_check_parameters, &
186	tcm_check_data_output, &
187	tcm_init_arrays, &
188	tcm_init, &
189	tcm_actions, &
190	tcm_prognostic_equations, &
191	tcm_swap_timelevel, &
192	tcm_3d_data_averaging, &
193	tcm_data_output_2d, &
194	tcm_data_output_3d
195
196	USE control_parameters, &
197	ONLY: air_chemistry, &
198	biometeorology, &
199	debug_output, &
200	debug_output_timestep, &
201	indoor_model, &
202	land_surface, &
203	large_scale_forcing, &
204	nesting_offline, &
205	nudging, &
206	ocean_mode, &
207	plant_canopy, &
208	salsa, &
209	surface_output, &
210	syn_turb_gen, &
211	urban_surface, &
212	vdi_checks, &
213	virtual_flight, &
214	virtual_measurement, &
215	wind_turbine
216
217	!
218	!-- load interface routines of all PALM modules
219	USE biometeorology_mod, &
220	ONLY: bio_parin, &
221	bio_check_data_output, &
222	bio_init, &
223	bio_init_checks, &
224	bio_header, &
225	bio_3d_data_averaging, &
226	bio_data_output_2d, &
227	bio_data_output_3d, &
228	bio_rrd_global, &
229	bio_rrd_local, &
230	bio_wrd_global, &
231	bio_wrd_local
232
233	USE bulk_cloud_model_mod, &
234	ONLY: bulk_cloud_model, &
235	bcm_parin, &
236	bcm_check_parameters, &
237	bcm_check_data_output_pr, &
238	bcm_check_data_output, &
239	bcm_init_arrays, &
240	bcm_init, &
241	bcm_header, &
242	bcm_actions, &
243	bcm_non_advective_processes, &
244	bcm_exchange_horiz, &
245	bcm_prognostic_equations, &
246	bcm_swap_timelevel, &
247	bcm_3d_data_averaging, &
248	bcm_data_output_2d, &
249	bcm_data_output_3d, &
250	bcm_rrd_global, &
251	bcm_wrd_global, &
252	bcm_rrd_local, &
253	bcm_wrd_local
254
255	USE chemistry_model_mod, &
256	ONLY: chem_parin, &
257	chem_check_parameters, &
258	chem_check_data_output_pr, &
259	chem_check_data_output, &
260	chem_exchange_horiz_bounds, &
261	chem_init_arrays, &
262	chem_init, &
263	chem_header, &
264	chem_actions, &
265	chem_non_advective_processes, &
266	chem_prognostic_equations, &
267	chem_swap_timelevel, &
268	chem_3d_data_averaging, &
269	chem_data_output_2d, &
270	chem_data_output_3d, &
271	chem_statistics, &
272	chem_rrd_local, &
273	chem_wrd_local
274
275	USE diagnostic_output_quantities_mod, &
276	ONLY: doq_3d_data_averaging, &
277	doq_check_data_output, &
278	doq_define_netcdf_grid, &
279	doq_init, &
280	doq_output_2d, &
281	doq_output_3d, &
282	doq_wrd_local
283	! doq_rrd_local, &
284
285	USE flight_mod, &
286	ONLY: flight_parin, &
287	flight_header, &
288	flight_init, &
289	flight_rrd_global, &
290	flight_wrd_global
291
292	USE gust_mod, &
293	ONLY: gust_module_enabled, &
294	gust_parin, &
295	gust_check_parameters, &
296	gust_check_data_output_pr, &
297	gust_check_data_output, &
298	gust_init_arrays, &
299	gust_init, &
300	gust_header, &
301	gust_actions, &
302	gust_prognostic_equations, &
303	gust_swap_timelevel, &
304	gust_3d_data_averaging, &
305	gust_data_output_2d, &
306	gust_data_output_3d, &
307	gust_statistics, &
308	gust_rrd_global, &
309	gust_wrd_global, &
310	gust_rrd_local, &
311	gust_wrd_local
312
313	USE indoor_model_mod, &
314	ONLY: im_parin, &
315	im_check_data_output, &
316	im_check_parameters, &
317	im_data_output_3d, &
318	im_init
319
320	USE lagrangian_particle_model_mod, &
321	ONLY: lpm_parin, &
322	lpm_header, &
323	lpm_check_parameters, &
324	lpm_init_arrays, &
325	lpm_init, &
326	lpm_actions, &
327	lpm_rrd_global, &
328	lpm_rrd_local, &
329	lpm_wrd_local, &
330	lpm_wrd_global
331
332	USE land_surface_model_mod, &
333	ONLY: lsm_parin, &
334	lsm_check_parameters, &
335	lsm_check_data_output_pr, &
336	lsm_check_data_output, &
337	lsm_init_arrays, &
338	lsm_init, &
339	lsm_header, &
340	lsm_swap_timelevel, &
341	lsm_3d_data_averaging, &
342	lsm_data_output_2d, &
343	lsm_rrd_local, &
344	lsm_wrd_local
345
346	USE lsf_nudging_mod, &
347	ONLY: lsf_nudging_check_parameters, &
348	lsf_nudging_check_data_output_pr, &
349	lsf_init, &
350	nudge_init, &
351	lsf_nudging_header
352
353	USE multi_agent_system_mod, &
354	ONLY: mas_parin
355
356	USE nesting_offl_mod, &
357	ONLY: nesting_offl_parin, &
358	nesting_offl_check_parameters, &
359	nesting_offl_header
360
361	USE ocean_mod, &
362	ONLY: ocean_parin, &
363	ocean_check_parameters, &
364	ocean_check_data_output_pr, &
365	ocean_check_data_output, &
366	ocean_init_arrays, &
367	ocean_init, &
368	ocean_header, &
369	ocean_actions, &
370	ocean_prognostic_equations, &
371	ocean_swap_timelevel, &
372	ocean_3d_data_averaging, &
373	ocean_data_output_2d, &
374	ocean_data_output_3d, &
375	ocean_rrd_global, &
376	ocean_wrd_global, &
377	ocean_rrd_local, &
378	ocean_wrd_local
379
380	USE particle_attributes, &
381	ONLY: particle_advection
382
383	USE plant_canopy_model_mod, &
384	ONLY: pcm_parin, &
385	pcm_check_parameters, &
386	pcm_check_data_output, &
387	pcm_init, &
388	pcm_header, &
389	pcm_3d_data_averaging, &
390	pcm_data_output_3d
391
392	USE radiation_model_mod, &
393	ONLY: radiation, &
394	radiation_parin, &
395	radiation_check_parameters, &
396	radiation_check_data_output_ts, &
397	radiation_check_data_output_pr, &
398	radiation_check_data_output, &
399	radiation_init, &
400	radiation_header, &
401	radiation_3d_data_averaging, &
402	radiation_data_output_2d, &
403	radiation_data_output_3d, &
404	radiation_rrd_local, &
405	radiation_wrd_local
406
407	USE salsa_mod, &
408	ONLY: salsa_parin, &
409	salsa_check_parameters, &
410	salsa_check_data_output_pr, &
411	salsa_check_data_output, &
412	salsa_init_arrays, &
413	salsa_init, &
414	salsa_header, &
415	salsa_actions, &
416	salsa_non_advective_processes, &
417	salsa_exchange_horiz_bounds, &
418	salsa_prognostic_equations, &
419	salsa_swap_timelevel, &
420	salsa_3d_data_averaging, &
421	salsa_data_output_2d, &
422	salsa_data_output_3d, &
423	salsa_statistics, &
424	salsa_rrd_local, &
425	salsa_wrd_local
426
427	USE spectra_mod, &
428	ONLY: calculate_spectra, &
429	spectra_parin, &
430	spectra_check_parameters, &
431	spectra_header
432
433	USE surface_data_output_mod, &
434	ONLY: surface_data_output_parin, &
435	surface_data_output_check_parameters, &
436	surface_data_output_init_arrays, &
437	surface_data_output_rrd_local, &
438	surface_data_output_rrd_global, &
439	surface_data_output_wrd_local, &
440	surface_data_output_wrd_global
441
442	USE synthetic_turbulence_generator_mod, &
443	ONLY: stg_parin, &
444	stg_check_parameters, &
445	stg_header, &
446	stg_rrd_global, &
447	stg_wrd_global
448
449	USE urban_surface_mod, &
450	ONLY: usm_parin, &
451	usm_check_parameters, &
452	usm_check_data_output, &
453	usm_init_arrays, &
454	usm_init, &
455	usm_swap_timelevel, &
456	usm_3d_data_averaging, &
457	usm_rrd_local, &
458	usm_wrd_local
459
460	USE vdi_internal_controls, &
461	ONLY: vdi_actions
462
463	USE virtual_measurement_mod, &
464	ONLY: vm_check_parameters, &
465	vm_init, &
466	vm_last_actions, &
467	vm_parin
468
469	USE wind_turbine_model_mod, &
470	ONLY: wtm_parin, &
471	wtm_check_parameters, &
472	wtm_init_arrays, &
473	wtm_init, &
474	wtm_actions, &
475	wtm_rrd_global, &
476	wtm_wrd_global
477
478	USE user, &
479	ONLY: user_module_enabled, &
480	user_parin, &
481	user_check_parameters, &
482	user_check_data_output_ts, &
483	user_check_data_output_pr, &
484	user_check_data_output, &
485	user_init, &
486	user_init_arrays, &
487	user_header, &
488	user_actions, &
489	user_3d_data_averaging, &
490	user_data_output_2d, &
491	user_data_output_3d, &
492	user_statistics, &
493	user_rrd_global, &
494	user_rrd_local, &
495	user_wrd_global, &
496	user_wrd_local, &
497	user_last_actions
498
499	IMPLICIT NONE
500
501	PRIVATE
502
503	!
504	!-- Public functions
505	PUBLIC &
506	module_interface_parin, &
507	module_interface_check_parameters, &
508	module_interface_check_data_output_ts, &
509	module_interface_check_data_output_pr, &
510	module_interface_check_data_output, &
511	module_interface_init_masks, &
512	module_interface_define_netcdf_grid, &
513	module_interface_init_arrays, &
514	module_interface_init, &
515	module_interface_init_checks, &
516	module_interface_header, &
517	module_interface_actions, &
518	module_interface_non_advective_processes, &
519	module_interface_exchange_horiz, &
520	module_interface_prognostic_equations, &
521	module_interface_swap_timelevel, &
522	module_interface_3d_data_averaging, &
523	module_interface_data_output_2d, &
524	module_interface_data_output_3d, &
525	module_interface_statistics, &
526	module_interface_rrd_global, &
527	module_interface_wrd_global, &
528	module_interface_rrd_local, &
529	module_interface_wrd_local, &
530	module_interface_last_actions
531
532
533	INTERFACE module_interface_parin
534	MODULE PROCEDURE module_interface_parin
535	END INTERFACE module_interface_parin
536
537	INTERFACE module_interface_check_parameters
538	MODULE PROCEDURE module_interface_check_parameters
539	END INTERFACE module_interface_check_parameters
540
541	INTERFACE module_interface_check_data_output_ts
542	MODULE PROCEDURE module_interface_check_data_output_ts
543	END INTERFACE module_interface_check_data_output_ts
544
545	INTERFACE module_interface_check_data_output_pr
546	MODULE PROCEDURE module_interface_check_data_output_pr
547	END INTERFACE module_interface_check_data_output_pr
548
549	INTERFACE module_interface_check_data_output
550	MODULE PROCEDURE module_interface_check_data_output
551	END INTERFACE module_interface_check_data_output
552
553	INTERFACE module_interface_init_masks
554	MODULE PROCEDURE module_interface_init_masks
555	END INTERFACE module_interface_init_masks
556
557	INTERFACE module_interface_define_netcdf_grid
558	MODULE PROCEDURE module_interface_define_netcdf_grid
559	END INTERFACE module_interface_define_netcdf_grid
560
561	INTERFACE module_interface_init_arrays
562	MODULE PROCEDURE module_interface_init_arrays
563	END INTERFACE module_interface_init_arrays
564
565	INTERFACE module_interface_init
566	MODULE PROCEDURE module_interface_init
567	END INTERFACE module_interface_init
568
569	INTERFACE module_interface_init_checks
570	MODULE PROCEDURE module_interface_init_checks
571	END INTERFACE module_interface_init_checks
572
573	INTERFACE module_interface_header
574	MODULE PROCEDURE module_interface_header
575	END INTERFACE module_interface_header
576
577	INTERFACE module_interface_actions
578	MODULE PROCEDURE module_interface_actions
579	MODULE PROCEDURE module_interface_actions_ij
580	END INTERFACE module_interface_actions
581
582	INTERFACE module_interface_non_advective_processes
583	MODULE PROCEDURE module_interface_non_advective_processes
584	MODULE PROCEDURE module_interface_non_advective_processes_ij
585	END INTERFACE module_interface_non_advective_processes
586
587	INTERFACE module_interface_exchange_horiz
588	MODULE PROCEDURE module_interface_exchange_horiz
589	END INTERFACE module_interface_exchange_horiz
590
591	INTERFACE module_interface_prognostic_equations
592	MODULE PROCEDURE module_interface_prognostic_equations
593	MODULE PROCEDURE module_interface_prognostic_equations_ij
594	END INTERFACE module_interface_prognostic_equations
595
596	INTERFACE module_interface_swap_timelevel
597	MODULE PROCEDURE module_interface_swap_timelevel
598	END INTERFACE module_interface_swap_timelevel
599
600	INTERFACE module_interface_3d_data_averaging
601	MODULE PROCEDURE module_interface_3d_data_averaging
602	END INTERFACE module_interface_3d_data_averaging
603
604	INTERFACE module_interface_data_output_2d
605	MODULE PROCEDURE module_interface_data_output_2d
606	END INTERFACE module_interface_data_output_2d
607
608	INTERFACE module_interface_data_output_3d
609	MODULE PROCEDURE module_interface_data_output_3d
610	END INTERFACE module_interface_data_output_3d
611
612	INTERFACE module_interface_statistics
613	MODULE PROCEDURE module_interface_statistics
614	END INTERFACE module_interface_statistics
615
616	INTERFACE module_interface_rrd_global
617	MODULE PROCEDURE module_interface_rrd_global
618	END INTERFACE module_interface_rrd_global
619
620	INTERFACE module_interface_wrd_global
621	MODULE PROCEDURE module_interface_wrd_global
622	END INTERFACE module_interface_wrd_global
623
624	INTERFACE module_interface_rrd_local
625	MODULE PROCEDURE module_interface_rrd_local
626	END INTERFACE module_interface_rrd_local
627
628	INTERFACE module_interface_wrd_local
629	MODULE PROCEDURE module_interface_wrd_local
630	END INTERFACE module_interface_wrd_local
631
632	INTERFACE module_interface_last_actions
633	MODULE PROCEDURE module_interface_last_actions
634	END INTERFACE module_interface_last_actions
635
636
637	CONTAINS
638
639
640	!------------------------------------------------------------------------------!
641	! Description:
642	! ------------
643	!> Read module-specific parameter namelists
644	!------------------------------------------------------------------------------!
645	SUBROUTINE module_interface_parin
646
647
648	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
649
650	CALL dynamics_parin
651
652	CALL bio_parin
653	CALL bcm_parin
654	CALL chem_parin
655	CALL flight_parin ! ToDo: rename module to match filename
656	CALL gust_parin
657	CALL im_parin
658	CALL lpm_parin
659	CALL lsm_parin
660	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
661	CALL mas_parin
662	CALL nesting_offl_parin
663	CALL ocean_parin
664	CALL pcm_parin
665	CALL radiation_parin
666	CALL salsa_parin
667	CALL spectra_parin
668	CALL surface_data_output_parin
669	CALL stg_parin
670	CALL usm_parin
671	CALL vm_parin
672	CALL wtm_parin
673
674	CALL user_parin
675
676	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
677
678
679	END SUBROUTINE module_interface_parin
680
681
682	!------------------------------------------------------------------------------!
683	! Description:
684	! ------------
685	!> Perform module-specific initialization checks
686	!------------------------------------------------------------------------------!
687	SUBROUTINE module_interface_check_parameters
688
689
690	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
691
692	CALL dynamics_check_parameters
693	CALL tcm_check_parameters
694
695	IF ( bulk_cloud_model ) CALL bcm_check_parameters
696	IF ( air_chemistry ) CALL chem_check_parameters
697	IF ( gust_module_enabled ) CALL gust_check_parameters
698	IF ( indoor_model ) CALL im_check_parameters
699	IF ( particle_advection ) CALL lpm_check_parameters
700	IF ( land_surface ) CALL lsm_check_parameters
701	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
702	IF ( nesting_offline ) CALL nesting_offl_check_parameters
703	IF ( ocean_mode ) CALL ocean_check_parameters
704	IF ( plant_canopy ) CALL pcm_check_parameters
705	IF ( radiation ) CALL radiation_check_parameters
706	IF ( salsa ) CALL salsa_check_parameters
707	IF ( calculate_spectra ) CALL spectra_check_parameters
708	IF ( surface_output ) CALL surface_data_output_check_parameters
709	IF ( syn_turb_gen ) CALL stg_check_parameters
710	IF ( urban_surface ) CALL usm_check_parameters
711	IF ( virtual_measurement ) CALL vm_check_parameters
712	IF ( wind_turbine ) CALL wtm_check_parameters
713
714	IF ( user_module_enabled ) CALL user_check_parameters
715
716	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
717
718
719	END SUBROUTINE module_interface_check_parameters
720
721
722	!------------------------------------------------------------------------------!
723	! Description:
724	! ------------
725	!> Check module-specific data output of timeseries
726	!------------------------------------------------------------------------------!
727	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
728
729
730	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
731	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
732	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
733	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
734
735
736	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
737
738	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
739
740	IF ( radiation ) THEN
741	CALL radiation_check_data_output_ts( dots_max, dots_num )
742	ENDIF
743
744	IF ( user_module_enabled ) THEN
745	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
746	ENDIF
747
748	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
749
750
751	END SUBROUTINE module_interface_check_data_output_ts
752
753
754	!------------------------------------------------------------------------------!
755	! Description:
756	! ------------
757	!> Check module-specific data output of profiles
758	!------------------------------------------------------------------------------!
759	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
760	dopr_unit )
761
762
763	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
764	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
765	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
766	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
767
768
769	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
770
771	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
772
773	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
774	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
775	ENDIF
776
777	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
778	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
779	ENDIF
780
781	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
782	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
783	ENDIF
784
785	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
786	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
787	ENDIF
788
789	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
790	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
791	ENDIF
792
793	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
794	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
795	ENDIF
796
797	IF ( unit == 'illegal' .AND. radiation ) THEN
798	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
799	ENDIF
800
801	IF ( unit == 'illegal' .AND. salsa ) THEN
802	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
803	ENDIF
804
805	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
806	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
807	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
808	ENDIF
809
810	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
811
812
813	END SUBROUTINE module_interface_check_data_output_pr
814
815	!------------------------------------------------------------------------------!
816	! Description:
817	! ------------
818	!> Check module-specific 2D and 3D data output
819	!------------------------------------------------------------------------------!
820	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
821
822
823	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
824	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
825
826	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
827	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
828	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
829	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
830
831
832	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
833
834	CALL dynamics_check_data_output( variable, unit )
835
836	CALL tcm_check_data_output( variable, unit )
837
838	IF ( unit == 'illegal' .AND. biometeorology ) THEN
839	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
840	ENDIF
841
842	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
843	CALL bcm_check_data_output( variable, unit )
844	ENDIF
845
846	IF ( unit == 'illegal' .AND. air_chemistry &
847	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
848	CALL chem_check_data_output( variable, unit, i, ilen, k )
849	ENDIF
850
851	IF ( unit == 'illegal' ) THEN
852	CALL doq_check_data_output( variable, unit )
853	ENDIF
854
855	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
856	CALL gust_check_data_output( variable, unit )
857	ENDIF
858
859	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
860	CALL lsm_check_data_output( variable, unit, i, ilen, k )
861	ENDIF
862
863	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
864	CALL ocean_check_data_output( variable, unit )
865	ENDIF
866
867	IF ( unit == 'illegal' .AND. plant_canopy &
868	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
869	CALL pcm_check_data_output( variable, unit )
870	ENDIF
871
872	IF ( unit == 'illegal' .AND. radiation ) THEN
873	CALL radiation_check_data_output( variable, unit, i, ilen, k )
874	ENDIF
875
876	IF ( unit == 'illegal' .AND. salsa ) THEN
877	CALL salsa_check_data_output( variable, unit )
878	ENDIF
879
880	IF ( unit == 'illegal' .AND. indoor_model ) THEN
881	CALL im_check_data_output( variable, unit )
882	ENDIF
883
884	IF ( unit == 'illegal' .AND. urban_surface &
885	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
886	CALL usm_check_data_output( variable, unit )
887	ENDIF
888
889	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
890	unit = ''
891	CALL user_check_data_output( variable, unit )
892	ENDIF
893
894	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
895
896
897	END SUBROUTINE module_interface_check_data_output
898
899
900	!------------------------------------------------------------------------------!
901	!
902	! Description:
903	! ------------
904	!> Interface for init_masks. ToDo: get rid of these redundant calls!
905	!------------------------------------------------------------------------------!
906	SUBROUTINE module_interface_init_masks( variable, unit )
907
908
909	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
910	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
911
912
913	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
914
915	CALL dynamics_init_masks( variable, unit )
916
917	IF ( unit == 'illegal' .AND. air_chemistry &
918	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
919	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
920	ENDIF
921
922	IF ( unit == 'illegal' ) THEN
923	CALL doq_check_data_output( variable, unit )
924	ENDIF
925
926	IF ( unit == 'illegal' .AND. radiation ) THEN
927	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
928	ENDIF
929
930	IF ( unit == 'illegal' .AND. salsa ) THEN
931	CALL salsa_check_data_output( variable, unit )
932	ENDIF
933
934	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
935	unit = ''
936	CALL user_check_data_output( variable, unit )
937	ENDIF
938
939	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
940
941
942	END SUBROUTINE module_interface_init_masks
943
944
945	!------------------------------------------------------------------------------!
946	!
947	! Description:
948	! ------------
949	!> Define appropriate grid for module-specific netcdf output variables.
950	!------------------------------------------------------------------------------!
951	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
952	grid_x, grid_y, grid_z )
953
954
955	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
956	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
957	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
958	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
959	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
960
961
962	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
963	!
964	!-- As long as no action is done in this subroutine, initialize strings with
965	!-- intent(out) attribute, in order to avoid compiler warnings.
966	found = .FALSE.
967	grid_x = 'none'
968	grid_y = 'none'
969	grid_z = 'none'
970	!
971	!-- Use var to avoid compiler warning about unused variable
972	IF ( var == ' ' ) RETURN
973
974	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
975
976
977	END SUBROUTINE module_interface_define_netcdf_grid
978
979
980	!------------------------------------------------------------------------------!
981	! Description:
982	! ------------
983	!> Allocate module-specific arrays and pointers
984	!------------------------------------------------------------------------------!
985	SUBROUTINE module_interface_init_arrays
986
987
988	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
989
990	CALL dynamics_init_arrays
991	CALL tcm_init_arrays
992
993	IF ( bulk_cloud_model ) CALL bcm_init_arrays
994	IF ( air_chemistry ) CALL chem_init_arrays
995	IF ( gust_module_enabled ) CALL gust_init_arrays
996	IF ( particle_advection ) CALL lpm_init_arrays
997	IF ( land_surface ) CALL lsm_init_arrays
998	IF ( ocean_mode ) CALL ocean_init_arrays
999	IF ( salsa ) CALL salsa_init_arrays
1000	IF ( urban_surface ) CALL usm_init_arrays
1001	IF ( surface_output ) CALL surface_data_output_init_arrays
1002	IF ( wind_turbine ) CALL wtm_init_arrays
1003
1004	IF ( user_module_enabled ) CALL user_init_arrays
1005
1006	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1007
1008
1009	END SUBROUTINE module_interface_init_arrays
1010
1011
1012	!------------------------------------------------------------------------------!
1013	! Description:
1014	! ------------
1015	!> Perform module-specific initialization
1016	!------------------------------------------------------------------------------!
1017	SUBROUTINE module_interface_init
1018
1019
1020	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1021
1022	CALL dynamics_init
1023	CALL tcm_init
1024
1025	IF ( biometeorology ) CALL bio_init
1026	IF ( bulk_cloud_model ) CALL bcm_init
1027	IF ( air_chemistry ) CALL chem_init
1028	IF ( virtual_flight ) CALL flight_init
1029	IF ( gust_module_enabled ) CALL gust_init
1030	IF ( indoor_model ) CALL im_init
1031	IF ( particle_advection ) CALL lpm_init
1032	IF ( large_scale_forcing ) CALL lsf_init
1033	IF ( land_surface ) CALL lsm_init
1034	IF ( nudging ) CALL nudge_init
1035	IF ( ocean_mode ) CALL ocean_init
1036	IF ( plant_canopy ) CALL pcm_init
1037	IF ( salsa ) CALL salsa_init
1038	IF ( urban_surface ) CALL usm_init
1039	IF ( virtual_measurement ) CALL vm_init
1040	IF ( wind_turbine ) CALL wtm_init
1041	IF ( radiation ) CALL radiation_init
1042
1043	CALL doq_init
1044
1045	IF ( user_module_enabled ) CALL user_init
1046
1047	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1048
1049
1050	END SUBROUTINE module_interface_init
1051
1052
1053	!------------------------------------------------------------------------------!
1054	! Description:
1055	! ------------
1056	!> Perform module-specific post-initialization checks
1057	!------------------------------------------------------------------------------!
1058	SUBROUTINE module_interface_init_checks
1059
1060
1061	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1062
1063	CALL dynamics_init_checks
1064
1065	IF ( biometeorology ) CALL bio_init_checks
1066
1067	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1068
1069
1070	END SUBROUTINE module_interface_init_checks
1071
1072
1073	!------------------------------------------------------------------------------!
1074	! Description:
1075	! ------------
1076	!> Gather module-specific header output
1077	!------------------------------------------------------------------------------!
1078	SUBROUTINE module_interface_header( io )
1079
1080
1081	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1082
1083
1084	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1085
1086	CALL dynamics_header( io )
1087
1088	IF ( biometeorology ) CALL bio_header ( io )
1089	IF ( bulk_cloud_model ) CALL bcm_header( io )
1090	IF ( air_chemistry ) CALL chem_header ( io )
1091	IF ( virtual_flight ) CALL flight_header( io )
1092	IF ( gust_module_enabled ) CALL gust_header( io )
1093	IF ( particle_advection ) CALL lpm_header( io )
1094	IF ( land_surface ) CALL lsm_header( io )
1095	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1096	IF ( nesting_offline ) CALL nesting_offl_header( io )
1097	IF ( ocean_mode ) CALL ocean_header( io )
1098	IF ( plant_canopy ) CALL pcm_header( io )
1099	IF ( radiation ) CALL radiation_header( io )
1100	IF ( salsa ) CALL salsa_header( io )
1101	IF ( calculate_spectra ) CALL spectra_header( io )
1102	IF ( syn_turb_gen ) CALL stg_header( io )
1103
1104	IF ( user_module_enabled ) CALL user_header( io )
1105
1106	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1107
1108
1109	END SUBROUTINE module_interface_header
1110
1111
1112	!------------------------------------------------------------------------------!
1113	! Description:
1114	! ------------
1115	!> Perform module-specific actions while in time-integration (vector-optimized)
1116	!------------------------------------------------------------------------------!
1117	SUBROUTINE module_interface_actions( location )
1118
1119
1120	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1121
1122	CALL dynamics_actions( location )
1123	CALL tcm_actions( location )
1124
1125	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1126	IF ( air_chemistry ) CALL chem_actions( location )
1127	IF ( gust_module_enabled ) CALL gust_actions( location )
1128	IF ( particle_advection ) CALL lpm_actions( location )
1129	IF ( ocean_mode ) CALL ocean_actions( location )
1130	IF ( salsa ) CALL salsa_actions( location )
1131	IF ( wind_turbine ) CALL wtm_actions( location )
1132
1133	IF ( user_module_enabled ) CALL user_actions( location )
1134	IF ( vdi_checks ) CALL vdi_actions( location )
1135
1136
1137	END SUBROUTINE module_interface_actions
1138
1139
1140	!------------------------------------------------------------------------------!
1141	! Description:
1142	! ------------
1143	!> Perform module-specific actions while in time-integration (cache-optimized)
1144	!------------------------------------------------------------------------------!
1145	SUBROUTINE module_interface_actions_ij( i, j, location )
1146
1147
1148	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1149	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1150	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1151
1152	CALL dynamics_actions( i, j, location )
1153	CALL tcm_actions( i, j, location )
1154
1155	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1156	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1157	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1158	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1159	IF ( salsa ) CALL salsa_actions( i, j, location )
1160	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1161
1162	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1163
1164
1165	END SUBROUTINE module_interface_actions_ij
1166
1167
1168	!------------------------------------------------------------------------------!
1169	! Description:
1170	! ------------
1171	!> Compute module-specific non_advective_processes (vector-optimized)
1172	!------------------------------------------------------------------------------!
1173	SUBROUTINE module_interface_non_advective_processes
1174
1175
1176	CALL dynamics_non_advective_processes
1177
1178	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1179	IF ( air_chemistry ) CALL chem_non_advective_processes
1180	IF ( salsa ) CALL salsa_non_advective_processes
1181
1182
1183	END SUBROUTINE module_interface_non_advective_processes
1184
1185
1186	!------------------------------------------------------------------------------!
1187	! Description:
1188	! ------------
1189	!> Compute module-specific non_advective_processes (cache-optimized)
1190	!------------------------------------------------------------------------------!
1191	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1192
1193
1194	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1195	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1196
1197	CALL dynamics_non_advective_processes( i, j )
1198
1199	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1200	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1201	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1202
1203
1204	END SUBROUTINE module_interface_non_advective_processes_ij
1205
1206	!------------------------------------------------------------------------------!
1207	! Description:
1208	! ------------
1209	!> Exchange horiz for module-specific quantities
1210	!------------------------------------------------------------------------------!
1211	SUBROUTINE module_interface_exchange_horiz
1212
1213
1214	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1215
1216	CALL dynamics_exchange_horiz
1217
1218	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1219	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1220	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1221
1222	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1223
1224
1225	END SUBROUTINE module_interface_exchange_horiz
1226
1227
1228	!------------------------------------------------------------------------------!
1229	! Description:
1230	! ------------
1231	!> Compute module-specific prognostic_equations (vector-optimized)
1232	!------------------------------------------------------------------------------!
1233	SUBROUTINE module_interface_prognostic_equations
1234
1235
1236	CALL dynamics_prognostic_equations
1237	CALL tcm_prognostic_equations
1238
1239	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1240	IF ( air_chemistry ) CALL chem_prognostic_equations
1241	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1242	IF ( ocean_mode ) CALL ocean_prognostic_equations
1243	IF ( salsa ) CALL salsa_prognostic_equations
1244
1245
1246	END SUBROUTINE module_interface_prognostic_equations
1247
1248
1249	!------------------------------------------------------------------------------!
1250	! Description:
1251	! ------------
1252	!> Compute module-specific prognostic_equations (cache-optimized)
1253	!------------------------------------------------------------------------------!
1254	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1255
1256
1257	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1258	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1259	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1260	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1261
1262	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1263	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1264
1265	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1266	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1267	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1268	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1269	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1270
1271
1272	END SUBROUTINE module_interface_prognostic_equations_ij
1273
1274
1275	!------------------------------------------------------------------------------!
1276	! Description:
1277	! ------------
1278	!> Swap the timelevel pointers for module-specific arrays
1279	!------------------------------------------------------------------------------!
1280	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1281
1282
1283	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1284
1285
1286	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1287
1288	CALL dynamics_swap_timelevel( swap_mode )
1289	CALL tcm_swap_timelevel( swap_mode )
1290
1291	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1292	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1293	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1294	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1295	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1296	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1297	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1298
1299	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1300
1301
1302	END SUBROUTINE module_interface_swap_timelevel
1303
1304
1305	!------------------------------------------------------------------------------!
1306	!
1307	! Description:
1308	! ------------
1309	!> Perform module-specific averaging of 3D data
1310	!------------------------------------------------------------------------------!
1311	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1312
1313
1314	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1315	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1316
1317
1318	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1319
1320	CALL dynamics_3d_data_averaging( mode, variable )
1321	CALL tcm_3d_data_averaging( mode, variable )
1322
1323	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1324	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1325	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1326	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1327	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1328	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1329	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1330	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1331	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1332	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1333	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1334
1335	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1336
1337	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1338
1339
1340	END SUBROUTINE module_interface_3d_data_averaging
1341
1342	!------------------------------------------------------------------------------!
1343	!
1344	! Description:
1345	! ------------
1346	!> Define module-specific 2D output variables
1347	!------------------------------------------------------------------------------!
1348	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1349	local_pf, two_d, nzb_do, nzt_do, &
1350	fill_value )
1351
1352	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1353	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1354	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1355	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1356	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1357	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1358	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1359	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1360	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1361
1362	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1363
1364
1365	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1366
1367	CALL dynamics_data_output_2d( &
1368	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1369	)
1370
1371	IF ( .NOT. found ) THEN
1372	CALL tcm_data_output_2d( &
1373	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1374	)
1375	ENDIF
1376
1377	IF ( .NOT. found .AND. biometeorology ) THEN
1378	CALL bio_data_output_2d( &
1379	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1380	)
1381	ENDIF
1382
1383	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1384	CALL bcm_data_output_2d( &
1385	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1386	)
1387	ENDIF
1388
1389	IF ( .NOT. found .AND. air_chemistry ) THEN
1390	CALL chem_data_output_2d( &
1391	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1392	)
1393	ENDIF
1394
1395	IF ( .NOT. found ) THEN
1396	CALL doq_output_2d( &
1397	av, variable, found, grid, mode, local_pf, two_d, &
1398	nzb_do, nzt_do, fill_value )
1399	ENDIF
1400
1401	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1402	CALL gust_data_output_2d( &
1403	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1404	)
1405	ENDIF
1406
1407	IF ( .NOT. found .AND. land_surface ) THEN
1408	CALL lsm_data_output_2d( &
1409	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1410	)
1411	ENDIF
1412
1413	IF ( .NOT. found .AND. ocean_mode ) THEN
1414	CALL ocean_data_output_2d( &
1415	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1416	)
1417	ENDIF
1418
1419	IF ( .NOT. found .AND. radiation ) THEN
1420	CALL radiation_data_output_2d( &
1421	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1422	)
1423	ENDIF
1424
1425	IF ( .NOT. found .AND. salsa ) THEN
1426	CALL salsa_data_output_2d( &
1427	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1428	)
1429	ENDIF
1430
1431	IF ( .NOT. found .AND. user_module_enabled ) THEN
1432	CALL user_data_output_2d( &
1433	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1434	)
1435	ENDIF
1436
1437	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1438
1439
1440	END SUBROUTINE module_interface_data_output_2d
1441
1442
1443	!------------------------------------------------------------------------------!
1444	!
1445	! Description:
1446	! ------------
1447	!> Define module-specific 3D output variables
1448	!------------------------------------------------------------------------------!
1449	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1450	fill_value, resorted, nzb_do, nzt_do )
1451
1452
1453	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1454	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1455	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1456	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1457	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1458	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1459	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1460
1461	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1462
1463
1464	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1465
1466	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1467	resorted = .FALSE.
1468
1469	IF ( .NOT. found ) THEN
1470	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1471	resorted = .TRUE.
1472	ENDIF
1473
1474	IF ( .NOT. found .AND. biometeorology ) THEN
1475	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1476	resorted = .FALSE.
1477	ENDIF
1478
1479	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1480	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1481	resorted = .TRUE.
1482	ENDIF
1483
1484	IF ( .NOT. found .AND. air_chemistry ) THEN
1485	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1486	resorted = .TRUE.
1487	ENDIF
1488
1489	IF ( .NOT. found ) THEN
1490	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1491	resorted = .TRUE.
1492	ENDIF
1493
1494	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1495	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1496	resorted = .TRUE.
1497	ENDIF
1498
1499	IF ( .NOT. found .AND. indoor_model ) THEN
1500	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1501	resorted = .TRUE.
1502	ENDIF
1503
1504	IF ( .NOT. found .AND. ocean_mode ) THEN
1505	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1506	resorted = .TRUE.
1507	ENDIF
1508
1509	IF ( .NOT. found .AND. plant_canopy ) THEN
1510	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1511	resorted = .TRUE.
1512	ENDIF
1513
1514	IF ( .NOT. found .AND. radiation ) THEN
1515	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1516	resorted = .TRUE.
1517	ENDIF
1518
1519	IF ( .NOT. found .AND. salsa ) THEN
1520	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1521	resorted = .TRUE.
1522	ENDIF
1523
1524	IF ( .NOT. found .AND. user_module_enabled ) THEN
1525	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1526	resorted = .TRUE.
1527	ENDIF
1528
1529	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1530
1531
1532	END SUBROUTINE module_interface_data_output_3d
1533
1534
1535	!------------------------------------------------------------------------------!
1536	! Description:
1537	! ------------
1538	!> Compute module-specific profile and timeseries data
1539	!------------------------------------------------------------------------------!
1540	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1541
1542
1543	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1544	INTEGER(iwp), INTENT(IN) :: sr !<
1545	INTEGER(iwp), INTENT(IN) :: tn !<
1546	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1547
1548
1549	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1550
1551	CALL dynamics_statistics( mode, sr, tn )
1552
1553	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1554	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1555	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1556
1557	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1558
1559	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1560
1561
1562	END SUBROUTINE module_interface_statistics
1563
1564
1565	!------------------------------------------------------------------------------!
1566	! Description:
1567	! ------------
1568	!> Read module-specific restart data globaly shared by all MPI ranks
1569	!------------------------------------------------------------------------------!
1570	SUBROUTINE module_interface_rrd_global( found )
1571
1572
1573	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1574
1575
1576	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1577
1578	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1579
1580	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1581	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1582	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1583	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1584	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1585	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1586	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1587	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1588	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1589
1590	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1591
1592	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1593
1594
1595	END SUBROUTINE module_interface_rrd_global
1596
1597
1598	!------------------------------------------------------------------------------!
1599	! Description:
1600	! ------------
1601	!> Write module-specific restart data globaly shared by all MPI ranks
1602	!------------------------------------------------------------------------------!
1603	SUBROUTINE module_interface_wrd_global
1604
1605
1606	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1607
1608	CALL dynamics_wrd_global
1609
1610	IF ( biometeorology ) CALL bio_wrd_global
1611	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1612	IF ( virtual_flight ) CALL flight_wrd_global
1613	IF ( gust_module_enabled ) CALL gust_wrd_global
1614	IF ( ocean_mode ) CALL ocean_wrd_global
1615	IF ( syn_turb_gen ) CALL stg_wrd_global
1616	IF ( wind_turbine ) CALL wtm_wrd_global
1617	IF ( surface_output ) CALL surface_data_output_wrd_global
1618
1619	IF ( user_module_enabled ) CALL user_wrd_global
1620
1621	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1622
1623
1624	END SUBROUTINE module_interface_wrd_global
1625
1626
1627	!------------------------------------------------------------------------------!
1628	! Description:
1629	! ------------
1630	!> Read module-specific restart data specific to local MPI ranks
1631	!------------------------------------------------------------------------------!
1632	SUBROUTINE module_interface_rrd_local( map_index, &
1633	nxlf, nxlc, nxl_on_file, &
1634	nxrf, nxrc, nxr_on_file, &
1635	nynf, nync, nyn_on_file, &
1636	nysf, nysc, nys_on_file, &
1637	tmp_2d, tmp_3d, found )
1638
1639
1640	INTEGER(iwp), INTENT(IN) :: map_index !<
1641	INTEGER(iwp), INTENT(IN) :: nxlc !<
1642	INTEGER(iwp), INTENT(IN) :: nxlf !<
1643	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1644	INTEGER(iwp), INTENT(IN) :: nxrc !<
1645	INTEGER(iwp), INTENT(IN) :: nxrf !<
1646	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1647	INTEGER(iwp), INTENT(IN) :: nync !<
1648	INTEGER(iwp), INTENT(IN) :: nynf !<
1649	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1650	INTEGER(iwp), INTENT(IN) :: nysc !<
1651	INTEGER(iwp), INTENT(IN) :: nysf !<
1652	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1653	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1654
1655	REAL(wp), &
1656	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1657	INTENT(OUT) :: tmp_2d !<
1658	REAL(wp), &
1659	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1660	INTENT(OUT) :: tmp_3d !<
1661
1662
1663	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1664
1665	CALL dynamics_rrd_local( &
1666	map_index, &
1667	nxlf, nxlc, nxl_on_file, &
1668	nxrf, nxrc, nxr_on_file, &
1669	nynf, nync, nyn_on_file, &
1670	nysf, nysc, nys_on_file, &
1671	tmp_2d, tmp_3d, found &
1672	) ! ToDo: change interface to pass variable
1673
1674	IF ( .NOT. found ) CALL bio_rrd_local( &
1675	found &
1676	)
1677
1678	IF ( .NOT. found ) CALL bcm_rrd_local( &
1679	map_index, &
1680	nxlf, nxlc, nxl_on_file, &
1681	nxrf, nxrc, nxr_on_file, &
1682	nynf, nync, nyn_on_file, &
1683	nysf, nysc, nys_on_file, &
1684	tmp_2d, tmp_3d, found &
1685	) ! ToDo: change interface to pass variable
1686
1687	IF ( .NOT. found ) CALL chem_rrd_local( &
1688	map_index, &
1689	nxlf, nxlc, nxl_on_file, &
1690	nxrf, nxrc, nxr_on_file, &
1691	nynf, nync, nyn_on_file, &
1692	nysf, nysc, nys_on_file, &
1693	tmp_3d, found &
1694	) ! ToDo: change interface to pass variable
1695
1696	! IF ( .NOT. found ) CALL doq_rrd_local( &
1697	! map_index, &
1698	! nxlf, nxlc, nxl_on_file, &
1699	! nxrf, nxrc, nxr_on_file, &
1700	! nynf, nync, nyn_on_file, &
1701	! nysf, nysc, nys_on_file, &
1702	! tmp_3d_non_standard, found &
1703	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1704
1705	IF ( .NOT. found ) CALL gust_rrd_local( &
1706	map_index, &
1707	nxlf, nxlc, nxl_on_file, &
1708	nxrf, nxrc, nxr_on_file, &
1709	nynf, nync, nyn_on_file, &
1710	nysf, nysc, nys_on_file, &
1711	tmp_2d, tmp_3d, found &
1712	) ! ToDo: change interface to pass variable
1713
1714	IF ( .NOT. found ) CALL lpm_rrd_local( &
1715	map_index, &
1716	nxlf, nxlc, nxl_on_file, &
1717	nxrf, nxrc, nxr_on_file, &
1718	nynf, nync, nyn_on_file, &
1719	nysf, nysc, nys_on_file, &
1720	tmp_3d, found &
1721	) ! ToDo: change interface to pass variable
1722
1723	IF ( .NOT. found ) CALL lsm_rrd_local( &
1724	map_index, &
1725	nxlf, nxlc, nxl_on_file, &
1726	nxrf, nxrc, nxr_on_file, &
1727	nynf, nync, nyn_on_file, &
1728	nysf, nysc, nys_on_file, &
1729	tmp_2d, found &
1730	) ! ToDo: change interface to pass variable
1731
1732	IF ( .NOT. found ) CALL ocean_rrd_local( &
1733	map_index, &
1734	nxlf, nxlc, nxl_on_file, &
1735	nxrf, nxrc, nxr_on_file, &
1736	nynf, nync, nyn_on_file, &
1737	nysf, nysc, nys_on_file, &
1738	tmp_3d, found &
1739	) ! ToDo: change interface to pass variable
1740
1741	IF ( .NOT. found ) CALL radiation_rrd_local( &
1742	map_index, &
1743	nxlf, nxlc, nxl_on_file, &
1744	nxrf, nxrc, nxr_on_file, &
1745	nynf, nync, nyn_on_file, &
1746	nysf, nysc, nys_on_file, &
1747	tmp_2d, tmp_3d, found &
1748	) ! ToDo: change interface to pass variable
1749
1750	IF ( .NOT. found ) CALL salsa_rrd_local( &
1751	map_index, &
1752	nxlf, nxlc, nxl_on_file, &
1753	nxrf, nxrc, nxr_on_file, &
1754	nynf, nync, nyn_on_file, &
1755	nysf, nysc, nys_on_file, &
1756	tmp_3d, found &
1757	) ! ToDo: change interface to pass variable
1758
1759	IF ( .NOT. found ) CALL usm_rrd_local( &
1760	map_index, &
1761	nxlf, nxlc, nxl_on_file, &
1762	nxrf, nxr_on_file, &
1763	nynf, nyn_on_file, &
1764	nysf, nysc, nys_on_file, &
1765	found &
1766	) ! ToDo: change interface to pass variable
1767	!
1768	!-- Surface data do not need overlap data, so do not pass these information.
1769	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1770
1771	IF ( .NOT. found ) CALL user_rrd_local( &
1772	map_index, &
1773	nxlf, nxlc, nxl_on_file, &
1774	nxrf, nxrc, nxr_on_file, &
1775	nynf, nync, nyn_on_file, &
1776	nysf, nysc, nys_on_file, &
1777	tmp_3d, found &
1778	) ! ToDo: change interface to pass variable
1779
1780	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1781
1782
1783	END SUBROUTINE module_interface_rrd_local
1784
1785
1786	!------------------------------------------------------------------------------!
1787	! Description:
1788	! ------------
1789	!> Write module-specific restart data specific to local MPI ranks
1790	!------------------------------------------------------------------------------!
1791	SUBROUTINE module_interface_wrd_local
1792
1793
1794	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1795
1796	CALL dynamics_wrd_local
1797
1798	IF ( biometeorology ) CALL bio_wrd_local
1799	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1800	IF ( air_chemistry ) CALL chem_wrd_local
1801	CALL doq_wrd_local
1802	IF ( gust_module_enabled ) CALL gust_wrd_local
1803	IF ( particle_advection ) CALL lpm_wrd_local
1804	IF ( land_surface ) CALL lsm_wrd_local
1805	IF ( ocean_mode ) CALL ocean_wrd_local
1806	IF ( radiation ) CALL radiation_wrd_local
1807	IF ( salsa ) CALL salsa_wrd_local
1808	IF ( urban_surface ) CALL usm_wrd_local
1809	IF ( surface_output ) CALL surface_data_output_wrd_local
1810
1811	IF ( user_module_enabled ) CALL user_wrd_local
1812
1813	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1814
1815
1816	END SUBROUTINE module_interface_wrd_local
1817
1818
1819	!------------------------------------------------------------------------------!
1820	! Description:
1821	! ------------
1822	!> Perform module-specific last actions before the program terminates
1823	!------------------------------------------------------------------------------!
1824	SUBROUTINE module_interface_last_actions
1825
1826
1827	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1828
1829	CALL dynamics_last_actions
1830
1831	IF ( virtual_measurement ) CALL vm_last_actions
1832
1833	IF ( user_module_enabled ) CALL user_last_actions
1834
1835	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1836
1837
1838	END SUBROUTINE module_interface_last_actions
1839
1840
1841	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |