| [1682] | 1 | !> @file lpm_droplet_condensation.f90 |
|---|
| [2000] | 2 | !------------------------------------------------------------------------------! |
|---|
| [1036] | 3 | ! This file is part of PALM. |
|---|
| 4 | ! |
|---|
| [2000] | 5 | ! PALM is free software: you can redistribute it and/or modify it under the |
|---|
| 6 | ! terms of the GNU General Public License as published by the Free Software |
|---|
| 7 | ! Foundation, either version 3 of the License, or (at your option) any later |
|---|
| 8 | ! version. |
|---|
| [1036] | 9 | ! |
|---|
| 10 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY |
|---|
| 11 | ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
|---|
| 12 | ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
|---|
| 13 | ! |
|---|
| 14 | ! You should have received a copy of the GNU General Public License along with |
|---|
| 15 | ! PALM. If not, see <http://www.gnu.org/licenses/>. |
|---|
| 16 | ! |
|---|
| [2101] | 17 | ! Copyright 1997-2017 Leibniz Universitaet Hannover |
|---|
| [2000] | 18 | !------------------------------------------------------------------------------! |
|---|
| [1036] | 19 | ! |
|---|
| [849] | 20 | ! Current revisions: |
|---|
| 21 | ! ------------------ |
|---|
| [1891] | 22 | ! |
|---|
| [2001] | 23 | ! |
|---|
| [1891] | 24 | ! Former revisions: |
|---|
| 25 | ! ----------------- |
|---|
| 26 | ! $Id: lpm_droplet_condensation.f90 2101 2017-01-05 16:42:31Z kanani $ |
|---|
| 27 | ! |
|---|
| [2001] | 28 | ! 2000 2016-08-20 18:09:15Z knoop |
|---|
| 29 | ! Forced header and separation lines into 80 columns |
|---|
| 30 | ! |
|---|
| [1891] | 31 | ! 1890 2016-04-22 08:52:11Z hoffmann |
|---|
| [1890] | 32 | ! Some improvements of the Rosenbrock method. If the Rosenbrock method needs more |
|---|
| 33 | ! than 40 iterations to find a sufficient time setp, the model is not aborted. |
|---|
| 34 | ! This might lead to small erros. But they can be assumend as negligible, since |
|---|
| 35 | ! the maximum timesetp of the Rosenbrock method after 40 iterations will be |
|---|
| 36 | ! smaller than 10^-16 s. |
|---|
| [1851] | 37 | ! |
|---|
| [1872] | 38 | ! 1871 2016-04-15 11:46:09Z hoffmann |
|---|
| 39 | ! Initialization of aerosols added. |
|---|
| 40 | ! |
|---|
| [1851] | 41 | ! 1849 2016-04-08 11:33:18Z hoffmann |
|---|
| [1852] | 42 | ! Interpolation of supersaturation has been removed because it is not in |
|---|
| 43 | ! accordance with the release/depletion of latent heat/water vapor in |
|---|
| [1849] | 44 | ! interaction_droplets_ptq. |
|---|
| 45 | ! Calculation of particle Reynolds number has been corrected. |
|---|
| [1852] | 46 | ! eps_ros added from modules. |
|---|
| [1849] | 47 | ! |
|---|
| [1832] | 48 | ! 1831 2016-04-07 13:15:51Z hoffmann |
|---|
| 49 | ! curvature_solution_effects moved to particle_attributes |
|---|
| 50 | ! |
|---|
| [1823] | 51 | ! 1822 2016-04-07 07:49:42Z hoffmann |
|---|
| 52 | ! Unused variables removed. |
|---|
| 53 | ! |
|---|
| [1683] | 54 | ! 1682 2015-10-07 23:56:08Z knoop |
|---|
| 55 | ! Code annotations made doxygen readable |
|---|
| 56 | ! |
|---|
| [1360] | 57 | ! 1359 2014-04-11 17:15:14Z hoffmann |
|---|
| 58 | ! New particle structure integrated. |
|---|
| 59 | ! Kind definition added to all floating point numbers. |
|---|
| 60 | ! |
|---|
| [1347] | 61 | ! 1346 2014-03-27 13:18:20Z heinze |
|---|
| 62 | ! Bugfix: REAL constants provided with KIND-attribute especially in call of |
|---|
| 63 | ! intrinsic function like MAX, MIN, SIGN |
|---|
| 64 | ! |
|---|
| [1323] | 65 | ! 1322 2014-03-20 16:38:49Z raasch |
|---|
| 66 | ! REAL constants defined as wp-kind |
|---|
| 67 | ! |
|---|
| [1321] | 68 | ! 1320 2014-03-20 08:40:49Z raasch |
|---|
| [1320] | 69 | ! ONLY-attribute added to USE-statements, |
|---|
| 70 | ! kind-parameters added to all INTEGER and REAL declaration statements, |
|---|
| 71 | ! kinds are defined in new module kinds, |
|---|
| 72 | ! comment fields (!:) to be used for variable explanations added to |
|---|
| 73 | ! all variable declaration statements |
|---|
| [1072] | 74 | ! |
|---|
| [1319] | 75 | ! 1318 2014-03-17 13:35:16Z raasch |
|---|
| 76 | ! module interfaces removed |
|---|
| 77 | ! |
|---|
| [1093] | 78 | ! 1092 2013-02-02 11:24:22Z raasch |
|---|
| 79 | ! unused variables removed |
|---|
| 80 | ! |
|---|
| [1072] | 81 | ! 1071 2012-11-29 16:54:55Z franke |
|---|
| [1071] | 82 | ! Ventilation effect for evaporation of large droplets included |
|---|
| 83 | ! Check for unreasonable results included in calculation of Rosenbrock method |
|---|
| 84 | ! since physically unlikely results were observed and for the same |
|---|
| 85 | ! reason the first internal time step in Rosenbrock method should be < 1.0E02 in |
|---|
| 86 | ! case of evaporation |
|---|
| 87 | ! Unnecessary calculation of ql_int removed |
|---|
| 88 | ! Unnecessary calculations in Rosenbrock method (d2rdt2, drdt_m, dt_ros_last) |
|---|
| 89 | ! removed |
|---|
| 90 | ! Bugfix: factor in calculation of surface tension changed from 0.00155 to |
|---|
| 91 | ! 0.000155 |
|---|
| [849] | 92 | ! |
|---|
| [1037] | 93 | ! 1036 2012-10-22 13:43:42Z raasch |
|---|
| 94 | ! code put under GPL (PALM 3.9) |
|---|
| 95 | ! |
|---|
| [850] | 96 | ! 849 2012-03-15 10:35:09Z raasch |
|---|
| 97 | ! initial revision (former part of advec_particles) |
|---|
| [849] | 98 | ! |
|---|
| [850] | 99 | ! |
|---|
| [849] | 100 | ! Description: |
|---|
| 101 | ! ------------ |
|---|
| [1682] | 102 | !> Calculates change in droplet radius by condensation/evaporation, using |
|---|
| 103 | !> either an analytic formula or by numerically integrating the radius growth |
|---|
| 104 | !> equation including curvature and solution effects using Rosenbrocks method |
|---|
| 105 | !> (see Numerical recipes in FORTRAN, 2nd edition, p. 731). |
|---|
| 106 | !> The analytical formula and growth equation follow those given in |
|---|
| 107 | !> Rogers and Yau (A short course in cloud physics, 3rd edition, p. 102/103). |
|---|
| [849] | 108 | !------------------------------------------------------------------------------! |
|---|
| [1682] | 109 | SUBROUTINE lpm_droplet_condensation (ip,jp,kp) |
|---|
| 110 | |
|---|
| [849] | 111 | |
|---|
| [1320] | 112 | USE arrays_3d, & |
|---|
| [1849] | 113 | ONLY: hyp, pt, q, ql_c, ql_v |
|---|
| [849] | 114 | |
|---|
| [1320] | 115 | USE cloud_parameters, & |
|---|
| [1849] | 116 | ONLY: l_d_rv, l_v, rho_l, r_v |
|---|
| [849] | 117 | |
|---|
| [1320] | 118 | USE constants, & |
|---|
| 119 | ONLY: pi |
|---|
| [849] | 120 | |
|---|
| [1320] | 121 | USE control_parameters, & |
|---|
| [1822] | 122 | ONLY: dt_3d, dz, message_string, molecular_viscosity, rho_surface |
|---|
| 123 | |
|---|
| [1320] | 124 | USE cpulog, & |
|---|
| 125 | ONLY: cpu_log, log_point_s |
|---|
| [849] | 126 | |
|---|
| [1320] | 127 | USE grid_variables, & |
|---|
| [1822] | 128 | ONLY: dx, dy |
|---|
| [1071] | 129 | |
|---|
| [1320] | 130 | USE lpm_collision_kernels_mod, & |
|---|
| 131 | ONLY: rclass_lbound, rclass_ubound |
|---|
| [849] | 132 | |
|---|
| [1320] | 133 | USE kinds |
|---|
| 134 | |
|---|
| 135 | USE particle_attributes, & |
|---|
| [1871] | 136 | ONLY: curvature_solution_effects, hall_kernel, & |
|---|
| [1849] | 137 | molecular_weight_of_solute, molecular_weight_of_water, & |
|---|
| [1871] | 138 | number_of_particles, particles, radius_classes, rho_s, & |
|---|
| [1849] | 139 | use_kernel_tables, vanthoff, wang_kernel |
|---|
| [1320] | 140 | |
|---|
| 141 | |
|---|
| 142 | IMPLICIT NONE |
|---|
| 143 | |
|---|
| [1682] | 144 | INTEGER(iwp) :: ip !< |
|---|
| 145 | INTEGER(iwp) :: internal_timestep_count !< |
|---|
| 146 | INTEGER(iwp) :: jp !< |
|---|
| 147 | INTEGER(iwp) :: jtry !< |
|---|
| 148 | INTEGER(iwp) :: kp !< |
|---|
| 149 | INTEGER(iwp) :: n !< |
|---|
| 150 | INTEGER(iwp) :: ros_count !< |
|---|
| [1320] | 151 | |
|---|
| [1890] | 152 | INTEGER(iwp), PARAMETER :: maxtry = 40 !< |
|---|
| [1320] | 153 | |
|---|
| [1849] | 154 | LOGICAL :: repeat !< |
|---|
| [1320] | 155 | |
|---|
| [1682] | 156 | REAL(wp) :: aa !< |
|---|
| [1849] | 157 | REAL(wp) :: afactor !< curvature effects |
|---|
| [1682] | 158 | REAL(wp) :: arg !< |
|---|
| [1849] | 159 | REAL(wp) :: bfactor !< solute effects |
|---|
| [1682] | 160 | REAL(wp) :: ddenom !< |
|---|
| 161 | REAL(wp) :: delta_r !< |
|---|
| [1849] | 162 | REAL(wp) :: diameter !< diameter of cloud droplets |
|---|
| 163 | REAL(wp) :: diff_coeff_v !< diffusivity for water vapor |
|---|
| [1682] | 164 | REAL(wp) :: drdt !< |
|---|
| 165 | REAL(wp) :: drdt_ini !< |
|---|
| 166 | REAL(wp) :: dt_ros !< |
|---|
| 167 | REAL(wp) :: dt_ros_next !< |
|---|
| 168 | REAL(wp) :: dt_ros_sum !< |
|---|
| 169 | REAL(wp) :: dt_ros_sum_ini !< |
|---|
| 170 | REAL(wp) :: d2rdtdr !< |
|---|
| 171 | REAL(wp) :: errmax !< |
|---|
| [1849] | 172 | REAL(wp) :: e_a !< current vapor pressure |
|---|
| 173 | REAL(wp) :: e_s !< current saturation vapor pressure |
|---|
| [1682] | 174 | REAL(wp) :: err_ros !< |
|---|
| 175 | REAL(wp) :: g1 !< |
|---|
| 176 | REAL(wp) :: g2 !< |
|---|
| 177 | REAL(wp) :: g3 !< |
|---|
| 178 | REAL(wp) :: g4 !< |
|---|
| 179 | REAL(wp) :: r_ros !< |
|---|
| 180 | REAL(wp) :: r_ros_ini !< |
|---|
| 181 | REAL(wp) :: sigma !< |
|---|
| [1849] | 182 | REAL(wp) :: thermal_conductivity_v !< thermal conductivity for water |
|---|
| 183 | REAL(wp) :: t_int !< temperature |
|---|
| 184 | REAL(wp) :: w_s !< terminal velocity of droplets |
|---|
| [1682] | 185 | REAL(wp) :: re_p !< |
|---|
| [1849] | 186 | |
|---|
| 187 | ! |
|---|
| [849] | 188 | !-- Parameters for Rosenbrock method |
|---|
| [1682] | 189 | REAL(wp), PARAMETER :: a21 = 2.0_wp !< |
|---|
| 190 | REAL(wp), PARAMETER :: a31 = 48.0_wp / 25.0_wp !< |
|---|
| 191 | REAL(wp), PARAMETER :: a32 = 6.0_wp / 25.0_wp !< |
|---|
| 192 | REAL(wp), PARAMETER :: b1 = 19.0_wp / 9.0_wp !< |
|---|
| 193 | REAL(wp), PARAMETER :: b2 = 0.5_wp !< |
|---|
| 194 | REAL(wp), PARAMETER :: b3 = 25.0_wp / 108.0_wp !< |
|---|
| 195 | REAL(wp), PARAMETER :: b4 = 125.0_wp / 108.0_wp !< |
|---|
| 196 | REAL(wp), PARAMETER :: c21 = -8.0_wp !< |
|---|
| 197 | REAL(wp), PARAMETER :: c31 = 372.0_wp / 25.0_wp !< |
|---|
| 198 | REAL(wp), PARAMETER :: c32 = 12.0_wp / 5.0_wp !< |
|---|
| 199 | REAL(wp), PARAMETER :: c41 = -112.0_wp / 125.0_wp !< |
|---|
| 200 | REAL(wp), PARAMETER :: c42 = -54.0_wp / 125.0_wp !< |
|---|
| 201 | REAL(wp), PARAMETER :: c43 = -2.0_wp / 5.0_wp !< |
|---|
| 202 | REAL(wp), PARAMETER :: errcon = 0.1296_wp !< |
|---|
| 203 | REAL(wp), PARAMETER :: e1 = 17.0_wp / 54.0_wp !< |
|---|
| 204 | REAL(wp), PARAMETER :: e2 = 7.0_wp / 36.0_wp !< |
|---|
| 205 | REAL(wp), PARAMETER :: e3 = 0.0_wp !< |
|---|
| 206 | REAL(wp), PARAMETER :: e4 = 125.0_wp / 108.0_wp !< |
|---|
| [1871] | 207 | REAL(wp), PARAMETER :: eps_ros = 1.0E-3_wp !< accuracy of Rosenbrock method |
|---|
| [1682] | 208 | REAL(wp), PARAMETER :: gam = 0.5_wp !< |
|---|
| 209 | REAL(wp), PARAMETER :: grow = 1.5_wp !< |
|---|
| 210 | REAL(wp), PARAMETER :: pgrow = -0.25_wp !< |
|---|
| 211 | REAL(wp), PARAMETER :: pshrnk = -1.0_wp /3.0_wp !< |
|---|
| 212 | REAL(wp), PARAMETER :: shrnk = 0.5_wp !< |
|---|
| [849] | 213 | |
|---|
| 214 | ! |
|---|
| [1849] | 215 | !-- Parameters for terminal velocity |
|---|
| 216 | REAL(wp), PARAMETER :: a_rog = 9.65_wp !< parameter for fall velocity |
|---|
| 217 | REAL(wp), PARAMETER :: b_rog = 10.43_wp !< parameter for fall velocity |
|---|
| 218 | REAL(wp), PARAMETER :: c_rog = 0.6_wp !< parameter for fall velocity |
|---|
| 219 | REAL(wp), PARAMETER :: k_cap_rog = 4.0_wp !< parameter for fall velocity |
|---|
| 220 | REAL(wp), PARAMETER :: k_low_rog = 12.0_wp !< parameter for fall velocity |
|---|
| 221 | REAL(wp), PARAMETER :: d0_rog = 0.745_wp !< separation diameter |
|---|
| [849] | 222 | |
|---|
| [1849] | 223 | REAL(wp), DIMENSION(number_of_particles) :: ventilation_effect !< |
|---|
| 224 | REAL(wp), DIMENSION(number_of_particles) :: new_r !< |
|---|
| [849] | 225 | |
|---|
| 226 | |
|---|
| 227 | |
|---|
| [1849] | 228 | CALL cpu_log( log_point_s(42), 'lpm_droplet_condens', 'start' ) |
|---|
| [849] | 229 | |
|---|
| 230 | ! |
|---|
| [1849] | 231 | !-- Calculate temperature, saturation vapor pressure and current vapor pressure |
|---|
| 232 | t_int = pt(kp,jp,ip) * ( hyp(kp) / 100000.0_wp )**0.286_wp |
|---|
| 233 | e_s = 611.0_wp * EXP( l_d_rv * ( 3.6609E-3_wp - 1.0_wp / t_int ) ) |
|---|
| 234 | e_a = q(kp,jp,ip) * hyp(kp) / ( 0.378_wp * q(kp,jp,ip) + 0.622_wp ) |
|---|
| [849] | 235 | ! |
|---|
| [1849] | 236 | !-- Thermal conductivity for water (from Rogers and Yau, Table 7.1), |
|---|
| 237 | !-- diffusivity for water vapor (after Hall und Pruppacher, 1976) |
|---|
| 238 | thermal_conductivity_v = 7.94048E-05_wp * t_int + 0.00227011_wp |
|---|
| 239 | diff_coeff_v = 0.211E-4_wp * ( t_int / 273.15_wp )**1.94_wp * & |
|---|
| 240 | ( 101325.0_wp / hyp(kp) ) |
|---|
| 241 | ! |
|---|
| 242 | !-- Calculate effects of heat conductivity and diffusion of water vapor on the |
|---|
| 243 | !-- condensation/evaporation process (typically known as 1.0 / (F_k + F_d) ) |
|---|
| 244 | ddenom = 1.0_wp / ( rho_l * r_v * t_int / ( e_s * diff_coeff_v ) + & |
|---|
| 245 | ( l_v / ( r_v * t_int ) - 1.0_wp ) * rho_l * & |
|---|
| 246 | l_v / ( thermal_conductivity_v * t_int ) & |
|---|
| 247 | ) |
|---|
| [849] | 248 | |
|---|
| [1359] | 249 | new_r = 0.0_wp |
|---|
| 250 | |
|---|
| [1849] | 251 | ! |
|---|
| 252 | !-- Determine ventilation effect on evaporation of large drops |
|---|
| [1359] | 253 | DO n = 1, number_of_particles |
|---|
| [1849] | 254 | |
|---|
| 255 | IF ( particles(n)%radius >= 4.0E-5_wp .AND. e_a / e_s < 1.0_wp ) THEN |
|---|
| [849] | 256 | ! |
|---|
| [1849] | 257 | !-- Terminal velocity is computed for vertical direction (Rogers et al., |
|---|
| 258 | !-- 1993, J. Appl. Meteorol.) |
|---|
| 259 | diameter = particles(n)%radius * 2000.0_wp !diameter in mm |
|---|
| 260 | IF ( diameter <= d0_rog ) THEN |
|---|
| 261 | w_s = k_cap_rog * diameter * ( 1.0_wp - EXP( -k_low_rog * diameter ) ) |
|---|
| 262 | ELSE |
|---|
| 263 | w_s = a_rog - b_rog * EXP( -c_rog * diameter ) |
|---|
| 264 | ENDIF |
|---|
| [849] | 265 | ! |
|---|
| [1849] | 266 | !-- First calculate droplet's Reynolds number |
|---|
| 267 | re_p = 2.0_wp * particles(n)%radius * w_s / molecular_viscosity |
|---|
| [1071] | 268 | ! |
|---|
| [1359] | 269 | !-- Ventilation coefficient (Rogers and Yau, 1989): |
|---|
| 270 | IF ( re_p > 2.5_wp ) THEN |
|---|
| [1849] | 271 | ventilation_effect(n) = 0.78_wp + 0.28_wp * SQRT( re_p ) |
|---|
| [1071] | 272 | ELSE |
|---|
| [1849] | 273 | ventilation_effect(n) = 1.0_wp + 0.09_wp * re_p |
|---|
| [1071] | 274 | ENDIF |
|---|
| [1849] | 275 | ELSE |
|---|
| [1071] | 276 | ! |
|---|
| [1849] | 277 | !-- For small droplets or in supersaturated environments, the ventilation |
|---|
| 278 | !-- effect does not play a role |
|---|
| 279 | ventilation_effect(n) = 1.0_wp |
|---|
| [849] | 280 | ENDIF |
|---|
| [1359] | 281 | ENDDO |
|---|
| [849] | 282 | |
|---|
| 283 | ! |
|---|
| [1849] | 284 | !-- Use analytic model for condensational growth |
|---|
| 285 | IF( .NOT. curvature_solution_effects ) then |
|---|
| 286 | DO n = 1, number_of_particles |
|---|
| 287 | arg = particles(n)%radius**2 + 2.0_wp * dt_3d * ddenom * & |
|---|
| 288 | ventilation_effect(n) * & |
|---|
| 289 | ( e_a / e_s - 1.0_wp ) |
|---|
| [1359] | 290 | arg = MAX( arg, 1.0E-16_wp ) |
|---|
| 291 | new_r(n) = SQRT( arg ) |
|---|
| [1849] | 292 | ENDDO |
|---|
| 293 | ENDIF |
|---|
| [1359] | 294 | |
|---|
| [1849] | 295 | ! |
|---|
| 296 | !-- If selected, use numerical solution of the condensational growth |
|---|
| 297 | !-- equation (e.g., for studying the activation of aerosols). |
|---|
| 298 | !-- Curvature and solutions effects are included in growth equation. |
|---|
| 299 | !-- Change in Radius is calculated with a 4th-order Rosenbrock method |
|---|
| 300 | !-- for stiff o.d.e's with monitoring local truncation error to adjust |
|---|
| 301 | !-- stepsize (see Numerical recipes in FORTRAN, 2nd edition, p. 731). |
|---|
| [1359] | 302 | DO n = 1, number_of_particles |
|---|
| [1849] | 303 | IF ( curvature_solution_effects ) THEN |
|---|
| [1071] | 304 | |
|---|
| 305 | ros_count = 0 |
|---|
| 306 | repeat = .TRUE. |
|---|
| [849] | 307 | ! |
|---|
| [1071] | 308 | !-- Carry out the Rosenbrock algorithm. In case of unreasonable results |
|---|
| 309 | !-- the switch "repeat" will be set true and the algorithm will be carried |
|---|
| 310 | !-- out again with the internal time step set to its initial (small) value. |
|---|
| [1359] | 311 | !-- Unreasonable results may occur if the external conditions, especially |
|---|
| 312 | !-- the supersaturation, has significantly changed compared to the last |
|---|
| 313 | !-- PALM timestep. |
|---|
| [1071] | 314 | DO WHILE ( repeat ) |
|---|
| [849] | 315 | |
|---|
| [1071] | 316 | repeat = .FALSE. |
|---|
| 317 | ! |
|---|
| [1849] | 318 | !-- Curvature effect (afactor) with surface tension parameterization |
|---|
| 319 | !-- by Straka (2009) |
|---|
| 320 | sigma = 0.0761_wp - 0.000155_wp * ( t_int - 273.15_wp ) |
|---|
| 321 | afactor = 2.0_wp * sigma / ( rho_l * r_v * t_int ) |
|---|
| 322 | ! |
|---|
| [1871] | 323 | !-- Solute effect (bfactor) |
|---|
| 324 | bfactor = vanthoff * rho_s * particles(n)%rvar2**3 * & |
|---|
| 325 | molecular_weight_of_water / & |
|---|
| 326 | ( rho_l * molecular_weight_of_solute ) |
|---|
| [849] | 327 | |
|---|
| [1071] | 328 | r_ros = particles(n)%radius |
|---|
| [1359] | 329 | dt_ros_sum = 0.0_wp ! internal integrated time (s) |
|---|
| [1071] | 330 | internal_timestep_count = 0 |
|---|
| [849] | 331 | ! |
|---|
| [1071] | 332 | !-- Take internal time step values from the end of last PALM time step |
|---|
| 333 | dt_ros_next = particles(n)%rvar1 |
|---|
| 334 | |
|---|
| [849] | 335 | ! |
|---|
| [1871] | 336 | !-- Internal time step should not be > 1.0E-2 and < 1.0E-6 |
|---|
| 337 | IF ( dt_ros_next > 1.0E-2_wp ) THEN |
|---|
| [1890] | 338 | dt_ros_next = 1.0E-2_wp |
|---|
| [1871] | 339 | ELSEIF ( dt_ros_next < 1.0E-6_wp ) THEN |
|---|
| 340 | dt_ros_next = 1.0E-6_wp |
|---|
| [1071] | 341 | ENDIF |
|---|
| [1871] | 342 | |
|---|
| [849] | 343 | ! |
|---|
| [1071] | 344 | !-- If calculation of Rosenbrock method is repeated due to unreasonalble |
|---|
| 345 | !-- results during previous try the initial internal time step has to be |
|---|
| 346 | !-- reduced |
|---|
| 347 | IF ( ros_count > 1 ) THEN |
|---|
| [1871] | 348 | dt_ros_next = dt_ros_next * 0.1_wp |
|---|
| [1071] | 349 | ELSEIF ( ros_count > 5 ) THEN |
|---|
| [849] | 350 | ! |
|---|
| [1071] | 351 | !-- Prevent creation of infinite loop |
|---|
| 352 | message_string = 'ros_count > 5 in Rosenbrock method' |
|---|
| 353 | CALL message( 'lpm_droplet_condensation', 'PA0018', 2, 2, & |
|---|
| 354 | 0, 6, 0 ) |
|---|
| 355 | ENDIF |
|---|
| 356 | |
|---|
| [849] | 357 | ! |
|---|
| [1071] | 358 | !-- Internal time step must not be larger than PALM time step |
|---|
| 359 | dt_ros = MIN( dt_ros_next, dt_3d ) |
|---|
| [1871] | 360 | |
|---|
| [1071] | 361 | ! |
|---|
| 362 | !-- Integrate growth equation in time unless PALM time step is reached |
|---|
| 363 | DO WHILE ( dt_ros_sum < dt_3d ) |
|---|
| [849] | 364 | |
|---|
| [1071] | 365 | internal_timestep_count = internal_timestep_count + 1 |
|---|
| [849] | 366 | |
|---|
| 367 | ! |
|---|
| [1071] | 368 | !-- Derivative at starting value |
|---|
| [1849] | 369 | drdt = ddenom * ventilation_effect(n) * ( e_a / e_s - 1.0_wp - & |
|---|
| 370 | afactor / r_ros + & |
|---|
| 371 | bfactor / r_ros**3 & |
|---|
| 372 | ) / r_ros |
|---|
| 373 | |
|---|
| [1071] | 374 | drdt_ini = drdt |
|---|
| 375 | dt_ros_sum_ini = dt_ros_sum |
|---|
| [1890] | 376 | r_ros_ini = r_ros |
|---|
| [849] | 377 | |
|---|
| 378 | ! |
|---|
| [1071] | 379 | !-- Calculate radial derivative of dr/dt |
|---|
| [1849] | 380 | d2rdtdr = ddenom * ventilation_effect(n) * & |
|---|
| 381 | ( ( 1.0_wp - e_a / e_s ) / r_ros**2 + & |
|---|
| 382 | 2.0_wp * afactor / r_ros**3 - & |
|---|
| 383 | 4.0_wp * bfactor / r_ros**5 & |
|---|
| 384 | ) |
|---|
| [849] | 385 | ! |
|---|
| [1071] | 386 | !-- Adjust stepsize unless required accuracy is reached |
|---|
| 387 | DO jtry = 1, maxtry+1 |
|---|
| [849] | 388 | |
|---|
| [1071] | 389 | IF ( jtry == maxtry+1 ) THEN |
|---|
| [1890] | 390 | message_string = 'maxtry > 40 in Rosenbrock method' |
|---|
| 391 | CALL message( 'lpm_droplet_condensation', 'PA0347', 0, & |
|---|
| 392 | 1, 0, 6, 0 ) |
|---|
| [1071] | 393 | ENDIF |
|---|
| [849] | 394 | |
|---|
| [1359] | 395 | aa = 1.0_wp / ( gam * dt_ros ) - d2rdtdr |
|---|
| [1071] | 396 | g1 = drdt_ini / aa |
|---|
| [1890] | 397 | r_ros = r_ros_ini + a21 * g1 |
|---|
| [1849] | 398 | drdt = ddenom * ventilation_effect(n) * ( e_a / e_s - 1.0_wp - & |
|---|
| 399 | afactor / r_ros + & |
|---|
| 400 | bfactor / r_ros**3 & |
|---|
| 401 | ) / r_ros |
|---|
| [849] | 402 | |
|---|
| [1071] | 403 | g2 = ( drdt + c21 * g1 / dt_ros )& |
|---|
| 404 | / aa |
|---|
| [1890] | 405 | r_ros = r_ros_ini + a31 * g1 + a32 * g2 |
|---|
| [1849] | 406 | drdt = ddenom * ventilation_effect(n) * ( e_a / e_s - 1.0_wp - & |
|---|
| 407 | afactor / r_ros + & |
|---|
| 408 | bfactor / r_ros**3 & |
|---|
| 409 | ) / r_ros |
|---|
| [849] | 410 | |
|---|
| [1071] | 411 | g3 = ( drdt + & |
|---|
| 412 | ( c31 * g1 + c32 * g2 ) / dt_ros ) / aa |
|---|
| 413 | g4 = ( drdt + & |
|---|
| 414 | ( c41 * g1 + c42 * g2 + c43 * g3 ) / dt_ros ) / aa |
|---|
| [1890] | 415 | r_ros = r_ros_ini + b1 * g1 + b2 * g2 + b3 * g3 + b4 * g4 |
|---|
| [849] | 416 | |
|---|
| [1071] | 417 | dt_ros_sum = dt_ros_sum_ini + dt_ros |
|---|
| [849] | 418 | |
|---|
| [1071] | 419 | IF ( dt_ros_sum == dt_ros_sum_ini ) THEN |
|---|
| 420 | message_string = 'zero stepsize in Rosenbrock method' |
|---|
| [1359] | 421 | CALL message( 'lpm_droplet_condensation', 'PA0348', 2, & |
|---|
| 422 | 2, 0, 6, 0 ) |
|---|
| [1071] | 423 | ENDIF |
|---|
| [849] | 424 | ! |
|---|
| [1071] | 425 | !-- Calculate error |
|---|
| [1359] | 426 | err_ros = e1 * g1 + e2 * g2 + e3 * g3 + e4 * g4 |
|---|
| 427 | errmax = 0.0_wp |
|---|
| [1071] | 428 | errmax = MAX( errmax, ABS( err_ros / r_ros_ini ) ) / eps_ros |
|---|
| [849] | 429 | ! |
|---|
| [1071] | 430 | !-- Leave loop if accuracy is sufficient, otherwise try again |
|---|
| 431 | !-- with a reduced stepsize |
|---|
| [1359] | 432 | IF ( errmax <= 1.0_wp ) THEN |
|---|
| [1071] | 433 | EXIT |
|---|
| 434 | ELSE |
|---|
| [1890] | 435 | dt_ros = MAX( ABS( 0.9_wp * dt_ros * errmax**pshrnk ), & |
|---|
| 436 | shrnk * ABS( dt_ros ) ) |
|---|
| [1071] | 437 | ENDIF |
|---|
| 438 | |
|---|
| 439 | ENDDO ! loop for stepsize adjustment |
|---|
| 440 | |
|---|
| 441 | ! |
|---|
| 442 | !-- Calculate next internal time step |
|---|
| 443 | IF ( errmax > errcon ) THEN |
|---|
| [1359] | 444 | dt_ros_next = 0.9_wp * dt_ros * errmax**pgrow |
|---|
| [849] | 445 | ELSE |
|---|
| [1071] | 446 | dt_ros_next = grow * dt_ros |
|---|
| [849] | 447 | ENDIF |
|---|
| 448 | |
|---|
| [1071] | 449 | ! |
|---|
| 450 | !-- Estimated time step is reduced if the PALM time step is exceeded |
|---|
| 451 | IF ( ( dt_ros_next + dt_ros_sum ) >= dt_3d ) THEN |
|---|
| 452 | dt_ros = dt_3d - dt_ros_sum |
|---|
| 453 | ELSE |
|---|
| 454 | dt_ros = dt_ros_next |
|---|
| 455 | ENDIF |
|---|
| [849] | 456 | |
|---|
| [1071] | 457 | ENDDO |
|---|
| [849] | 458 | ! |
|---|
| [1071] | 459 | !-- Store internal time step value for next PALM step |
|---|
| 460 | particles(n)%rvar1 = dt_ros_next |
|---|
| [849] | 461 | |
|---|
| 462 | ! |
|---|
| [1071] | 463 | !-- Radius should not fall below 1E-8 because Rosenbrock method may |
|---|
| 464 | !-- lead to errors otherwise |
|---|
| [1871] | 465 | new_r(n) = MAX( r_ros, particles(n)%rvar2 ) |
|---|
| [1071] | 466 | ! |
|---|
| 467 | !-- Check if calculated droplet radius change is reasonable since in |
|---|
| 468 | !-- case of droplet evaporation the Rosenbrock method may lead to |
|---|
| 469 | !-- secondary solutions which are physically unlikely. |
|---|
| 470 | !-- Due to the solution effect the droplets may grow for relative |
|---|
| [1359] | 471 | !-- humidities below 100%, but change of radius should not be too |
|---|
| 472 | !-- large. In case of unreasonable droplet growth the Rosenbrock |
|---|
| 473 | !-- method is recalculated using a smaller initial time step. |
|---|
| [1071] | 474 | !-- Limiting values are tested for droplets down to 1.0E-7 |
|---|
| [1359] | 475 | IF ( new_r(n) - particles(n)%radius >= 3.0E-7_wp .AND. & |
|---|
| [1849] | 476 | e_a / e_s < 0.97_wp ) THEN |
|---|
| [1071] | 477 | ros_count = ros_count + 1 |
|---|
| 478 | repeat = .TRUE. |
|---|
| [849] | 479 | ENDIF |
|---|
| 480 | |
|---|
| [1071] | 481 | ENDDO ! Rosenbrock method |
|---|
| [849] | 482 | |
|---|
| 483 | ENDIF |
|---|
| 484 | |
|---|
| [1359] | 485 | delta_r = new_r(n) - particles(n)%radius |
|---|
| [849] | 486 | |
|---|
| 487 | ! |
|---|
| 488 | !-- Sum up the change in volume of liquid water for the respective grid |
|---|
| 489 | !-- volume (this is needed later in lpm_calc_liquid_water_content for |
|---|
| 490 | !-- calculating the release of latent heat) |
|---|
| [1890] | 491 | ql_c(kp,jp,ip) = ql_c(kp,jp,ip) + particles(n)%weight_factor * & |
|---|
| [1359] | 492 | rho_l * 1.33333333_wp * pi * & |
|---|
| 493 | ( new_r(n)**3 - particles(n)%radius**3 ) / & |
|---|
| [849] | 494 | ( rho_surface * dx * dy * dz ) |
|---|
| [1890] | 495 | IF ( ql_c(kp,jp,ip) > 100.0_wp ) THEN |
|---|
| 496 | WRITE( message_string, * ) 'k=',kp,' j=',jp,' i=',ip, & |
|---|
| 497 | ' ql_c=',ql_c(kp,jp,ip), ' &part(',n,')%wf=', & |
|---|
| [849] | 498 | particles(n)%weight_factor,' delta_r=',delta_r |
|---|
| 499 | CALL message( 'lpm_droplet_condensation', 'PA0143', 2, 2, -1, 6, 1 ) |
|---|
| 500 | ENDIF |
|---|
| 501 | |
|---|
| 502 | ! |
|---|
| 503 | !-- Change the droplet radius |
|---|
| [1890] | 504 | IF ( ( new_r(n) - particles(n)%radius ) < 0.0_wp .AND. & |
|---|
| [1359] | 505 | new_r(n) < 0.0_wp ) THEN |
|---|
| [1890] | 506 | WRITE( message_string, * ) '#1 k=',kp,' j=',jp,' i=',ip, & |
|---|
| [1849] | 507 | ' e_s=',e_s, ' e_a=',e_a,' t_int=',t_int, & |
|---|
| [1890] | 508 | ' &delta_r=',delta_r, & |
|---|
| [849] | 509 | ' particle_radius=',particles(n)%radius |
|---|
| 510 | CALL message( 'lpm_droplet_condensation', 'PA0144', 2, 2, -1, 6, 1 ) |
|---|
| 511 | ENDIF |
|---|
| 512 | |
|---|
| 513 | ! |
|---|
| 514 | !-- Sum up the total volume of liquid water (needed below for |
|---|
| 515 | !-- re-calculating the weighting factors) |
|---|
| [1890] | 516 | ql_v(kp,jp,ip) = ql_v(kp,jp,ip) + particles(n)%weight_factor * new_r(n)**3 |
|---|
| [849] | 517 | |
|---|
| [1359] | 518 | particles(n)%radius = new_r(n) |
|---|
| [849] | 519 | |
|---|
| 520 | ! |
|---|
| 521 | !-- Determine radius class of the particle needed for collision |
|---|
| [1359] | 522 | IF ( ( hall_kernel .OR. wang_kernel ) .AND. use_kernel_tables ) & |
|---|
| [849] | 523 | THEN |
|---|
| [1359] | 524 | particles(n)%class = ( LOG( new_r(n) ) - rclass_lbound ) / & |
|---|
| 525 | ( rclass_ubound - rclass_lbound ) * & |
|---|
| [849] | 526 | radius_classes |
|---|
| 527 | particles(n)%class = MIN( particles(n)%class, radius_classes ) |
|---|
| 528 | particles(n)%class = MAX( particles(n)%class, 1 ) |
|---|
| 529 | ENDIF |
|---|
| 530 | |
|---|
| 531 | ENDDO |
|---|
| 532 | |
|---|
| 533 | CALL cpu_log( log_point_s(42), 'lpm_droplet_condens', 'stop' ) |
|---|
| 534 | |
|---|
| 535 | |
|---|
| 536 | END SUBROUTINE lpm_droplet_condensation |
|---|
