Home

Context Navigation

init_dvrp.f90 @ 152

Last change on this file since 152 was 139, checked in by raasch, 17 years ago

New:
---

Plant canopy model of Watanabe (2004,BLM 112,307-341) added.
It can be switched on by the inipar parameter plant_canopy.
The inipar parameter canopy_mode can be used to prescribe a
plant canopy type. The default case is a homogeneous plant
canopy. Heterogeneous distributions of the leaf area
density and the canopy drag coefficient can be defined in the
new routine user_init_plant_canopy (user_interface).
The inipar parameters lad_surface, lad_vertical_gradient and
lad_vertical_gradient_level can be used in order to
prescribe the vertical profile of leaf area density. The
inipar parameter drag_coefficient determines the canopy
drag coefficient.
Finally, the inipar parameter pch_index determines the
index of the upper boundary of the plant canopy.

Allow new case bc_uv_t = 'dirichlet_0' for channel flow.

For unknown variables (CASE DEFAULT) call new subroutine user_data_output_dvrp

Pressure boundary conditions for vertical walls added to the multigrid solver.
They are applied using new wall flag arrays (wall_flags_..) which are defined
for each grid level. New argument gls added to routine user_init_grid
(user_interface).

Frequence of sorting particles can be controlled with new particles_par
parameter dt_sort_particles. Sorting is moved from the SGS timestep loop in
advec_particles after the end of this loop.

advec_particles, check_parameters, data_output_dvrp, header, init_3d_model, init_grid, init_particles, init_pegrid, modules, package_parin, parin, plant_canopy_model, read_var_list, read_3d_binary, user_interface, write_var_list, write_3d_binary

Changed:

Redefine initial nzb_local as the actual total size of topography (later the
extent of topography in nzb_local is reduced by 1dx at the E topography walls
and by 1dy at the N topography walls to form the basis for nzb_s_inner);
for consistency redefine 'single_building' case.

Vertical profiles now based on nzb_s_inner; they are divided by
ngp_2dh_s_inner (scalars, procucts of scalars) and ngp_2dh (staggered velocity
components and their products, procucts of scalars and velocity components),
respectively.

Allow two instead of one digit to specify isosurface and slicer variables.

Status of 3D-volume NetCDF data file only depends on switch netcdf_64bit_3d (check_open)

prognostic_equations include the respective wall_*flux in the parameter list of
calls of diffusion_s. Same as before, only the values of wall_heatflux(0:4)
can be assigned. At present, wall_humidityflux, wall_qflux, wall_salinityflux,
and wall_scalarflux are kept zero. diffusion_s uses the respective wall_*flux
instead of wall_heatflux. This update serves two purposes:

it avoids errors in calculations with humidity/scalar/salinity and prescribed

non-zero wall_heatflux,

it prepares PALM for a possible assignment of wall fluxes of

humidity/scalar/salinity in a future release.

buoyancy, check_open, data_output_dvrp, diffusion_s, diffusivities, flow_statistics, header, init_3d_model, init_dvrp, init_grid, modules, prognostic_equations

Errors:

Bugfix: summation of sums_l_l in diffusivities.

Several bugfixes in the ocean part: Initial density rho is calculated
(init_ocean). Error in initializing u_init and v_init removed
(check_parameters). Calculation of density flux now starts from
nzb+1 (production_e).

Bugfix: pleft/pright changed to pnorth/psouth in sendrecv of particle tail
numbers along y, small bugfixes in the SGS part (advec_particles)

Bugfix: model_string needed a default value (combine_plot_fields)

Bugfix: wavenumber calculation for even nx in routines maketri (poisfft)

Bugfix: assignment of fluxes at walls

Bugfix: absolute value of f must be used when calculating the Blackadar mixing length (init_1d_model)

advec_particles, check_parameters, combine_plot_fields, diffusion_s, diffusivities, init_ocean, init_1d_model, poisfft, production_e

Property svn:keywords set to Id

File size: 20.6 KB

Line
1	SUBROUTINE init_dvrp
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	! TEST: print* statements
8	! ToDo: checking of mode_dvrp for legal values is not correct
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: init_dvrp.f90 139 2007-11-29 09:37:41Z raasch $
13	!
14	! 130 2007-11-13 14:08:40Z letzel
15	! allow two instead of one digit to specify isosurface and slicer variables
16	! Test output of isosurface on camera file
17	!
18	! 82 2007-04-16 15:40:52Z raasch
19	! Preprocessor strings for different linux clusters changed to "lc",
20	! routine local_flush is used for buffer flushing
21	!
22	! 17 2007-02-19 01:57:39Z raasch
23	! dvrp_output_local activated for all streams
24	!
25	! 13 2007-02-14 12:15:07Z raasch
26	! RCS Log replace by Id keyword, revision history cleaned up
27	!
28	! Revision 1.12 2006/02/23 12:30:22 raasch
29	! ebene renamed section, pl.. replaced by do..,
30	!
31	! Revision 1.1 2000/04/27 06:24:39 raasch
32	! Initial revision
33	!
34	!
35	! Description:
36	! ------------
37	! Initializing actions needed when using dvrp-software
38	!------------------------------------------------------------------------------!
39	#if defined( __dvrp_graphics )
40
41	USE arrays_3d
42	USE DVRP
43	USE dvrp_variables
44	USE grid_variables
45	USE indices
46	USE pegrid
47	USE control_parameters
48
49	IMPLICIT NONE
50
51	CHARACTER (LEN=2) :: section_chr
52	CHARACTER (LEN=80) :: dvrp_file_local
53	INTEGER :: i, j, k, l, m, pn, tv, vn
54	LOGICAL :: allocated
55	REAL :: center(3), distance
56
57	REAL, DIMENSION(:,:,:), ALLOCATABLE :: local_pf
58
59	TYPE(CSTRING), SAVE :: dvrp_directory_c, dvrp_file_c, &
60	dvrp_file_local_c,dvrp_host_c, &
61	dvrp_password_c, dvrp_username_c, name_c
62
63	!
64	!-- Set the maximum time the program can be suspended on user request (by
65	!-- dvrp steering). This variable is defined in module DVRP.
66	DVRP_MAX_SUSPEND_TIME = 7200
67
68	!
69	!-- Allocate array holding the names and limits of the steering variables
70	!-- (must have the same number of elements as array mode_dvrp!)
71	ALLOCATE( steering_dvrp(10) )
72
73	!
74	!-- Check, if output parameters are given and/or allowed
75	!-- and set default-values, where necessary
76	IF ( dvrp_username == ' ' ) THEN
77	IF ( myid == 0 ) THEN
78	PRINT*, '+++ init_dvrp: dvrp_username is undefined'
79	CALL local_stop
80	ENDIF
81	ENDIF
82
83	IF ( dvrp_output /= 'ftp' .AND. dvrp_output /= 'rtsp' .AND. &
84	dvrp_output /= 'local' ) THEN
85	IF ( myid == 0 ) THEN
86	PRINT*, '+++ init_dvrp: dvrp_output="', dvrp_output, '" not allowed'
87	CALL local_stop
88	ENDIF
89	ENDIF
90
91	IF ( dvrp_directory == 'default' ) THEN
92	dvrp_directory = TRIM( dvrp_username ) // '/' // TRIM( run_identifier )
93	ENDIF
94
95	IF ( dvrp_output /= 'local' ) THEN
96	IF ( dvrp_file /= 'default' .AND. dvrp_file /= '/dev/null' ) THEN
97	IF ( myid == 0 ) THEN
98	PRINT*, '+++ init_dvrp: dvrp_file="', dvrp_file, '" not allowed'
99	CALL local_stop
100	ENDIF
101	ENDIF
102	ENDIF
103
104	!
105	!-- Strings are assigned to strings of special type which have a CHAR( 0 )
106	!-- (C end-of-character symbol) at their end. This is needed when strings are
107	!-- passed to C routines.
108	dvrp_directory_c = dvrp_directory
109	dvrp_file_c = dvrp_file
110	dvrp_host_c = dvrp_host
111	dvrp_password_c = dvrp_password
112	dvrp_username_c = dvrp_username
113
114	!
115	!-- Loop over all output modes choosed
116	m = 1
117	allocated = .FALSE.
118	DO WHILE ( mode_dvrp(m) /= ' ' )
119
120	!
121	!-- Check, if mode is allowed
122	IF ( mode_dvrp(m)(1:10) /= 'isosurface' .AND. &
123	mode_dvrp(m)(1:6) /= 'slicer' .AND. &
124	mode_dvrp(m)(1:9) /= 'particles' ) THEN
125
126	IF ( myid == 0 ) THEN
127	PRINT*, '+++ init_dvrp: mode_dvrp="', mode_dvrp, '" not allowed'
128	ENDIF
129	CALL local_stop
130
131	ENDIF
132
133	!
134	!-- Camera position must be computed and written on file when no dvrp-output
135	!-- has been generated so far (in former runs)
136	! IF ( dvrp_filecount == 0 ) THEN
137	!
138	!-- Compute center of domain and distance of camera from center
139	center(1) = ( nx + 1.0 ) * dx * 0.5 * superelevation_x
140	center(2) = ( ny + 1.0 ) * dy * 0.5 * superelevation_y
141	center(3) = ( zu(nz_do3d) - zu(nzb) ) * 0.5 * superelevation
142	distance = 1.5 * MAX( ( nx + 1.0 ) * dx * superelevation_x, &
143	( ny + 1.0 ) * dy * superelevation_y, &
144	( zu(nz_do3d) - zu(nzb) ) * superelevation )
145
146	!
147	!-- Write camera position on file
148	CALL DVRP_INIT( m-1, 0 )
149
150	!
151	!-- Create filename for camera
152	IF ( dvrp_output == 'rtsp' ) THEN
153
154	WRITE ( 9, * ) '*** vor dvrp_output_rtsp'
155	CALL local_flush( 9 )
156
157	dvrp_file = TRIM( mode_dvrp(m) ) // '/camera.dvr'
158	dvrp_file_c = dvrp_file
159	CALL DVRP_OUTPUT_RTSP( m-1, dvrp_host_c, dvrp_username_c, &
160	dvrp_password_c, dvrp_directory_c, &
161	dvrp_file_c )
162	WRITE ( 9, * ) '*** nach dvrp_output_rtsp'
163	CALL local_flush( 9 )
164
165	ELSEIF ( dvrp_output == 'ftp' ) THEN
166
167	dvrp_file = TRIM( mode_dvrp(m) ) // '.camera.dvr'
168	dvrp_file_c = dvrp_file
169	! CALL DVRP_OUTPUT_FTP( m-1, 0, dvrp_host_c, dvrp_username_c, &
170	! dvrp_password_c, dvrp_directory_c, &
171	! dvrp_file_c )
172
173	ELSE
174
175	IF ( dvrp_file(1:9) /= '/dev/null' ) THEN
176	dvrp_file_local = TRIM( mode_dvrp(m) ) // '.camera.dvr'
177	dvrp_file_local_c = dvrp_file_local
178	ELSE
179	dvrp_file_local_c = dvrp_file_c
180	ENDIF
181	CALL DVRP_OUTPUT_LOCAL( m-1, 0, dvrp_file_local_c )
182
183	ENDIF
184
185	CALL DVRP_CAMERA( m-1, center, distance )
186	WRITE ( 9, * ) '*** #1'
187	CALL local_flush( 9 )
188
189	!
190	!-- Define bounding box material and create a bounding box
191	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.5, 0.5, 0.5, 0.0 )
192	CALL DVRP_BOUNDINGBOX( m-1, 1, 0.01, 0.0, 0.0, 0.0, &
193	(nx+1) * dx * superelevation_x, &
194	(ny+1) * dy * superelevation_y, &
195	zu(nz_do3d) * superelevation )
196
197	CALL DVRP_VISUALIZE( m-1, 0, 0 )
198	CALL DVRP_EXIT( m-1 )
199	WRITE ( 9, * ) '*** #2'
200	CALL local_flush( 9 )
201
202
203	!
204	!-- Write topography isosurface on file
205	CALL DVRP_INIT( m-1, 0 )
206
207	!
208	!-- Create filename for buildings
209	IF ( dvrp_output == 'rtsp' ) THEN
210
211	dvrp_file = TRIM( mode_dvrp(m) ) // '/buildings.dvr'
212	dvrp_file_c = dvrp_file
213	CALL DVRP_OUTPUT_RTSP( m-1, dvrp_host_c, dvrp_username_c, &
214	dvrp_password_c, dvrp_directory_c, &
215	dvrp_file_c )
216	WRITE ( 9, * ) '*** #3'
217	CALL local_flush( 9 )
218
219	ELSEIF ( dvrp_output == 'ftp' ) THEN
220
221	dvrp_file = TRIM( mode_dvrp(m) ) // '.buildings.dvr'
222	dvrp_file_c = dvrp_file
223	! CALL DVRP_OUTPUT_FTP( m-1, 0, dvrp_host_c, dvrp_username_c, &
224	! dvrp_password_c, dvrp_directory_c, &
225	! dvrp_file_c )
226
227	ELSE
228
229	IF ( dvrp_file(1:9) /= '/dev/null' ) THEN
230	dvrp_file_local = TRIM( mode_dvrp(m) ) // '.buildings.dvr'
231	dvrp_file_local_c = dvrp_file_local
232	ELSE
233	dvrp_file_local_c = dvrp_file_c
234	ENDIF
235	CALL DVRP_OUTPUT_LOCAL( m-1, 0, dvrp_file_local_c )
236
237	ENDIF
238
239	!
240	!-- Determine local gridpoint coordinates
241	IF ( .NOT. allocated ) THEN
242	ALLOCATE( xcoor_dvrp(nxl:nxr+1), ycoor_dvrp(nys:nyn+1), &
243	zcoor_dvrp(nzb:nz_do3d) )
244	allocated = .TRUE.
245
246	DO i = nxl, nxr+1
247	xcoor_dvrp(i) = i * dx * superelevation_x
248	ENDDO
249	DO j = nys, nyn+1
250	ycoor_dvrp(j) = j * dy * superelevation_y
251	ENDDO
252	zcoor_dvrp = zu(nzb:nz_do3d) * superelevation
253	nx_dvrp = nxr+1 - nxl + 1
254	ny_dvrp = nyn+1 - nys + 1
255	nz_dvrp = nz_do3d - nzb + 1
256	ENDIF
257
258	!
259	!-- Define the grid used by dvrp
260	CALL DVRP_GRID( m-1, nx_dvrp, ny_dvrp, nz_dvrp, xcoor_dvrp, &
261	ycoor_dvrp, zcoor_dvrp )
262	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.8, 0.7, 0.6, 0.0 )
263	WRITE ( 9, * ) '*** #4'
264	CALL local_flush( 9 )
265
266	!
267	!-- Compute and plot isosurface in dvr-format
268	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
269	local_pf = 0.0
270	DO i = nxl, nxr+1
271	DO j = nys, nyn+1
272	IF ( nzb_s_inner(j,i) > 0 ) THEN
273	local_pf(i,j,nzb:nzb_s_inner(j,i)) = 1.0
274	ENDIF
275	ENDDO
276	ENDDO
277	WRITE ( 9, * ) '*** #4.1'
278	CALL local_flush( 9 )
279	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
280	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
281	WRITE ( 9, * ) '*** #4.2'
282	CALL local_flush( 9 )
283	CALL DVRP_THRESHOLD( m-1, 1.0 )
284	WRITE ( 9, * ) '*** #4.3'
285	CALL local_flush( 9 )
286	CALL DVRP_VISUALIZE( m-1, 1, 0 )
287	WRITE ( 9, * ) '*** #4.4'
288	CALL local_flush( 9 )
289
290	DEALLOCATE( local_pf )
291
292	CALL DVRP_EXIT( m-1 )
293	WRITE ( 9, * ) '*** #5'
294	CALL local_flush( 9 )
295
296	!
297	!-- Write the surface isosurface on file
298	CALL DVRP_INIT( m-1, 0 )
299
300	!
301	!-- Create filename for surface
302	IF ( dvrp_output == 'rtsp' ) THEN
303
304	dvrp_file = TRIM( mode_dvrp(m) ) // '/surface.dvr'
305	dvrp_file_c = dvrp_file
306	CALL DVRP_OUTPUT_RTSP( m-1, dvrp_host_c, dvrp_username_c, &
307	dvrp_password_c, dvrp_directory_c, &
308	dvrp_file_c )
309	WRITE ( 9, * ) '*** #6'
310	CALL local_flush( 9 )
311
312	ELSEIF ( dvrp_output == 'ftp' ) THEN
313
314	dvrp_file = TRIM( mode_dvrp(m) ) // '.surface.dvr'
315	dvrp_file_c = dvrp_file
316	! CALL DVRP_OUTPUT_FTP( m-1, 0, dvrp_host_c, dvrp_username_c, &
317	! dvrp_password_c, dvrp_directory_c, &
318	! dvrp_file_c )
319
320	ELSE
321
322	IF ( dvrp_file(1:9) /= '/dev/null' ) THEN
323	dvrp_file_local = TRIM( mode_dvrp(m) ) // '.surface.dvr'
324	dvrp_file_local_c = dvrp_file_local
325	ELSE
326	dvrp_file_local_c = dvrp_file_c
327	ENDIF
328	CALL DVRP_OUTPUT_LOCAL( m-1, 0, dvrp_file_local_c )
329
330	ENDIF
331
332	!
333	!-- Determine local gridpoint coordinates
334	IF ( .NOT. allocated ) THEN
335	ALLOCATE( xcoor_dvrp(nxl:nxr+1), ycoor_dvrp(nys:nyn+1), &
336	zcoor_dvrp(nzb:nz_do3d) )
337	allocated = .TRUE.
338
339	DO i = nxl, nxr+1
340	xcoor_dvrp(i) = i * dx * superelevation_x
341	ENDDO
342	DO j = nys, nyn+1
343	ycoor_dvrp(j) = j * dy * superelevation_y
344	ENDDO
345	zcoor_dvrp = zu(nzb:nz_do3d) * superelevation
346	nx_dvrp = nxr+1 - nxl + 1
347	ny_dvrp = nyn+1 - nys + 1
348	nz_dvrp = nz_do3d - nzb + 1
349	ENDIF
350
351	!
352	!-- Define the grid used by dvrp
353	CALL DVRP_GRID( m-1, nx_dvrp, ny_dvrp, nz_dvrp, xcoor_dvrp, &
354	ycoor_dvrp, zcoor_dvrp )
355	CALL DVRP_MATERIAL_RGB( m-1, 1, 0.0, 0.6, 0.0, 0.0 )
356	WRITE ( 9, * ) '*** #7'
357	CALL local_flush( 9 )
358
359	!
360	!-- Compute and plot isosurface in dvr-format
361	ALLOCATE( local_pf(nxl:nxr+1,nys:nyn+1,nzb:nz_do3d) )
362	local_pf = 0.0
363	local_pf(:,:,0) = 1.0
364
365	CALL DVRP_DATA( m-1, local_pf, 1, nx_dvrp, ny_dvrp, nz_dvrp, &
366	cyclic_dvrp, cyclic_dvrp, cyclic_dvrp )
367	CALL DVRP_THRESHOLD( m-1, 1.0 )
368	CALL DVRP_VISUALIZE( m-1, 1, 0 )
369
370	DEALLOCATE( local_pf )
371
372	CALL DVRP_EXIT( m-1 )
373	WRITE ( 9, * ) '*** #8'
374	CALL local_flush( 9 )
375
376
377	! ENDIF
378
379
380	!
381	!-- Initialize dvrp for all dvrp-calls during the run
382	CALL DVRP_INIT( m-1, 0 )
383
384	!
385	!-- Preliminary definition of filename for dvrp-output
386	IF ( dvrp_output == 'rtsp' ) THEN
387
388	!
389	!-- First initialize parameters for possible interactive steering.
390	!-- Every parameter has to be passed to the respective stream.
391	pn = 1
392	!
393	!-- Initialize threshold counter needed for initialization of the
394	!-- isosurface steering variables
395	tv = 0
396
397	DO WHILE ( mode_dvrp(pn) /= ' ' )
398
399	IF ( mode_dvrp(pn)(1:10) == 'isosurface' ) THEN
400
401	READ ( mode_dvrp(pn), '(10X,I2)' ) vn
402	steering_dvrp(pn)%name = do3d(0,vn)
403	tv = tv + 1
404
405	IF ( do3d(0,vn)(1:1) == 'w' ) THEN
406	steering_dvrp(pn)%min = -4.0
407	steering_dvrp(pn)%max = 5.0
408	ELSE
409	steering_dvrp(pn)%min = 288.0
410	steering_dvrp(pn)%max = 292.0
411	ENDIF
412
413	name_c = TRIM( do3d(0,vn) )
414	WRITE ( 9, * ) '*** #9'
415	CALL local_flush( 9 )
416	CALL DVRP_STEERING_INIT( m-1, name_c, steering_dvrp(pn)%min, &
417	steering_dvrp(pn)%max, threshold(tv) )
418	WRITE ( 9, * ) '*** #10'
419	CALL local_flush( 9 )
420
421	ELSEIF ( mode_dvrp(pn)(1:6) == 'slicer' ) THEN
422
423	READ ( mode_dvrp(pn), '(6X,I2)' ) vn
424	steering_dvrp(pn)%name = do2d(0,vn)
425	name_c = TRIM( do2d(0,vn) )
426
427	l = MAX( 2, LEN_TRIM( do2d(0,vn) ) )
428	section_chr = do2d(0,vn)(l-1:l)
429	SELECT CASE ( section_chr )
430	CASE ( 'xy' )
431	steering_dvrp(pn)%imin = 0
432	steering_dvrp(pn)%imax = nz_do3d
433	slicer_position_dvrp(pn) = section(1,1)
434	CALL DVRP_STEERING_INIT( m-1, name_c, &
435	steering_dvrp(pn)%imin, &
436	steering_dvrp(pn)%imax, &
437	slicer_position_dvrp(pn) )
438	CASE ( 'xz' )
439	steering_dvrp(pn)%imin = 0
440	steering_dvrp(pn)%imax = ny
441	slicer_position_dvrp(pn) = section(1,2)
442	CALL DVRP_STEERING_INIT( m-1, name_c, &
443	steering_dvrp(pn)%imin, &
444	steering_dvrp(pn)%imax, &
445	slicer_position_dvrp(pn) )
446	CASE ( 'yz' )
447	steering_dvrp(pn)%imin = 0
448	steering_dvrp(pn)%imax = nx
449	slicer_position_dvrp(pn) = section(1,3)
450	CALL DVRP_STEERING_INIT( m-1, name_c, &
451	steering_dvrp(pn)%imin, &
452	steering_dvrp(pn)%imax, &
453	slicer_position_dvrp(pn) )
454	END SELECT
455
456	ENDIF
457
458	pn = pn + 1
459
460	ENDDO
461
462	WRITE ( 9, * ) '*** #11'
463	CALL local_flush( 9 )
464
465	dvrp_file = TRIM( mode_dvrp(m) ) // '/*****.dvr'
466	dvrp_file_c = dvrp_file
467	CALL DVRP_OUTPUT_RTSP( m-1, dvrp_host_c, dvrp_username_c, &
468	dvrp_password_c, dvrp_directory_c, &
469	dvrp_file_c )
470	WRITE ( 9, * ) '*** #12'
471	CALL local_flush( 9 )
472
473	ELSEIF ( dvrp_output == 'ftp' ) THEN
474
475	dvrp_file = TRIM( mode_dvrp(m) ) // '.%05d.dvr'
476	dvrp_file_c = dvrp_file
477	! CALL DVRP_OUTPUT_FTP( m-1, 0, dvrp_host_c, dvrp_username_c, &
478	! dvrp_password_c, dvrp_directory_c, dvrp_file_c )
479
480	ELSE
481
482	IF ( dvrp_file(1:9) /= '/dev/null' ) THEN
483	dvrp_file_local = TRIM( mode_dvrp(m) ) // '_%05d.dvr'
484	dvrp_file_local_c = dvrp_file_local
485	ELSE
486	dvrp_file_local_c = dvrp_file_c
487	ENDIF
488	CALL DVRP_OUTPUT_LOCAL( m-1, 0, dvrp_file_local_c )
489
490	ENDIF
491
492	! dvrp_file = TRIM( mode_dvrp(m) ) // '.%05d.dvr' // CHAR( 0 )
493	! dvrp_file = TRIM( mode_dvrp(m) ) // '/*****.dvr' // CHAR( 0 )
494	! dvrp_file = '/dev/null' // CHAR( 0 )
495	! CALL DVRP_OUTPUT_FTP( m-1, 0, dvrp_host, dvrp_username, dvrp_password, &
496	! dvrp_directory, dvrp_file )
497	! CALL DVRP_OUTPUT_RTSP( m-1, dvrp_host, dvrp_username, dvrp_password, &
498	! dvrp_directory, dvrp_file )
499	! CALL DVRP_OUTPUT_LOCAL( m-1, 0, dvrp_file )
500
501	!
502	!-- Determine local gridpoint coordinates
503	IF ( .NOT. allocated ) THEN
504	ALLOCATE( xcoor_dvrp(nxl:nxr+1), ycoor_dvrp(nys:nyn+1), &
505	zcoor_dvrp(nzb:nz_do3d) )
506	allocated = .TRUE.
507
508	DO i = nxl, nxr+1
509	xcoor_dvrp(i) = i * dx * superelevation_x
510	ENDDO
511	DO j = nys, nyn+1
512	ycoor_dvrp(j) = j * dy * superelevation_y
513	ENDDO
514	zcoor_dvrp = zu(nzb:nz_do3d) * superelevation
515	nx_dvrp = nxr+1 - nxl + 1
516	ny_dvrp = nyn+1 - nys + 1
517	nz_dvrp = nz_do3d - nzb + 1
518	ENDIF
519
520	!
521	!-- Define the grid used by dvrp
522	WRITE ( 9, * ) '*** #13'
523	CALL local_flush( 9 )
524
525	CALL DVRP_GRID( m-1, nx_dvrp, ny_dvrp, nz_dvrp, xcoor_dvrp, ycoor_dvrp, &
526	zcoor_dvrp )
527	WRITE ( 9, * ) '*** #14'
528	CALL local_flush( 9 )
529
530
531	m = m + 1
532
533	ENDDO
534
535	#endif
536	END SUBROUTINE init_dvrp
537
538
539	SUBROUTINE init_dvrp_logging
540
541	!------------------------------------------------------------------------------!
542	! Description:
543	! ------------
544	! Initializes logging events for time measurement with dvrp software
545	! and splits one PE from the global communicator in case that dvrp output
546	! shall be done by one single PE.
547	!------------------------------------------------------------------------------!
548	#if defined( __dvrp_graphics )
549
550	USE dvrp_variables
551	USE pegrid
552
553	IMPLICIT NONE
554
555	CHARACTER (LEN=4) :: chr
556	INTEGER :: idummy
557
558	!
559	!-- Initialize logging of calls by DVRP graphic software
560	WRITE ( 9, * ) '*** myid=', myid, ' vor DVRP_LOG_INIT'
561	CALL local_flush( 9 )
562	CALL DVRP_LOG_INIT( 'DVRP_LOG' // CHAR( 0 ), 0 )
563	WRITE ( 9, * ) '*** myid=', myid, ' nach DVRP_LOG_INIT'
564	CALL local_flush( 9 )
565
566	!
567	!-- User-defined logging events: #1 (total time needed by PALM)
568	WRITE ( 9, * ) '*** myid=', myid, ' vor DVRP_LOG_SYMBOL'
569	CALL local_flush( 9 )
570	CALL DVRP_LOG_SYMBOL( 1, 'PALM_total' // CHAR( 0 ) )
571	WRITE ( 9, * ) '*** myid=', myid, ' nach DVRP_LOG_SYMBOL'
572	CALL local_flush( 9 )
573	CALL DVRP_LOG_SYMBOL( 2, 'PALM_timestep' // CHAR( 0 ) )
574	WRITE ( 9, * ) '*** myid=', myid, ' vor DVRP_LOG_EVENT'
575	CALL local_flush( 9 )
576	CALL DVRP_LOG_EVENT( 1, 1 )
577	WRITE ( 9, * ) '*** myid=', myid, ' nach DVRP_LOG_EVENT'
578	CALL local_flush( 9 )
579
580	#if defined( __parallel )
581	!
582	!-- Find out, if dvrp output shall be done by a dedicated PE
583	CALL local_getenv( 'use_seperate_pe_for_dvrp_output', 31, chr, idummy )
584	IF ( chr == 'true' ) THEN
585	use_seperate_pe_for_dvrp_output = .TRUE.
586	WRITE ( 9, * ) '*** myid=', myid, ' vor DVRP_SPLIT'
587	CALL local_flush( 9 )
588	CALL DVRP_SPLIT( MPI_COMM_WORLD, comm_palm )
589	WRITE ( 9, * ) '*** myid=', myid, ' nach DVRP_SPLIT'
590	CALL local_flush( 9 )
591	CALL MPI_COMM_SIZE( comm_palm, numprocs, ierr )
592	ENDIF
593	#endif
594
595	#endif
596	END SUBROUTINE init_dvrp_logging
597
598
599	SUBROUTINE close_dvrp
600
601	!------------------------------------------------------------------------------!
602	! Description:
603	! ------------
604	! Exit of dvrp software and finish dvrp logging
605	!------------------------------------------------------------------------------!
606	#if defined( __dvrp_graphics )
607
608	USE control_parameters
609	USE dvrp
610	USE dvrp_variables
611
612	INTEGER :: m
613
614	!
615	!-- If required, close dvrp-software and logging of dvrp-calls
616	IF ( dt_dvrp /= 9999999.9 ) THEN
617	m = 1
618	DO WHILE ( mode_dvrp(m) /= ' ' )
619	CALL DVRP_EXIT( m-1 )
620	m = m + 1
621	ENDDO
622	CALL DVRP_LOG_EVENT( -1, 1 ) ! Logging of total cpu-time used by PALM
623	IF ( use_seperate_pe_for_dvrp_output ) THEN
624	CALL DVRP_SPLIT_EXIT( 1 ) ! Argument 0: reduced output
625	ELSE
626	CALL DVRP_LOG_EXIT( 1 ) ! Argument 0: reduced output
627	ENDIF
628	ENDIF
629
630	#endif
631	END SUBROUTINE close_dvrp

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/init_dvrp.f90 @ 152

Download in other formats: