source: palm/trunk/SOURCE/init_coupling.f90 @ 4445

Last change on this file since 4445 was 4444, checked in by raasch, 5 years ago

bugfix: cpp-directives for serial mode added

  • Property svn:keywords set to Id
File size: 5.6 KB
Line 
1!> @file init_coupling.f90
2!------------------------------------------------------------------------------!
3! This file is part of the PALM model system.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2020 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! -----------------
22!
23!
24! Former revisions:
25! ------------------
26! $Id: init_coupling.f90 4444 2020-03-05 15:59:50Z raasch $
27! bugfix: cpp-directives for serial mode added
28!
29! 4360 2020-01-07 11:25:50Z suehring
30! Corrected "Former revisions" section
31!
32! 3655 2019-01-07 16:51:22Z knoop
33! references to mrun replaced by palmrun, and updated
34!
35! 222 2009-01-12 16:04:16Z letzel
36! Initial revision
37!
38! Description:
39! ------------
40!> Initializing coupling via MPI-1 or MPI-2 if the coupled version of PALM is
41!> called.
42!------------------------------------------------------------------------------!
43  SUBROUTINE init_coupling
44 
45
46    USE control_parameters,                                                    &
47        ONLY:  coupling_char, coupling_mode
48       
49    USE kinds
50   
51    USE pegrid
52
53    USE vertical_nesting_mod
54
55    IMPLICIT NONE
56
57!
58!-- Local variables
59#if defined( __parallel )
60    INTEGER(iwp) ::  i            !<
61    INTEGER(iwp) ::  inter_color  !<
62#endif
63   
64    INTEGER(iwp), DIMENSION(:) ::  bc_data(0:3) = 0  !<
65
66!
67!-- Get information about the coupling mode from the environment variable
68!-- which has been set by the mpiexec command.
69!-- This method is currently not used because the mpiexec command is not
70!-- available on some machines
71!    CALL GET_ENVIRONMENT_VARIABLE( 'coupling_mode', coupling_mode, i )
72!    IF ( i == 0 )  coupling_mode = 'uncoupled'
73!    IF ( coupling_mode == 'ocean_to_atmosphere' )  coupling_char = '_O'
74
75!
76!-- Get information about the coupling mode from standard input (PE0 only) and
77!-- distribute it to the other PEs. Distribute PEs to 2 new communicators.
78!-- ATTENTION: numprocs will be reset according to the new communicators
79#if defined ( __parallel )
80
81    IF ( myid == 0 )  THEN
82       READ (*,*,ERR=10,END=10)  coupling_mode, bc_data(1), bc_data(2)
8310     CONTINUE
84       IF ( TRIM( coupling_mode ) == 'coupled_run' )  THEN
85          i = 1
86       ELSEIF ( TRIM( coupling_mode ) == 'vnested_twi' )  THEN
87          i = 9
88       ELSE
89          i = 0
90       ENDIF
91       bc_data(0) = i
92
93!
94!--    Check if '_O' has to be used as file extension in an uncoupled ocean
95!--    run. This is required, if this run shall be continued as a coupled run.
96       IF ( TRIM( coupling_mode ) == 'precursor_ocean' )  bc_data(3) = 1
97
98    ENDIF
99
100    CALL MPI_BCAST( bc_data(0), 4, MPI_INTEGER, 0, MPI_COMM_WORLD, ierr )
101    i = bc_data(0)
102
103    IF ( i == 0 )  THEN
104       coupling_mode = 'uncoupled'
105!
106!--    In case of a precursor ocean run, an additional flag file is created.
107!--    This is necessary for data_output_2d_on_each_pe = .T.
108       IF ( bc_data(3) == 1 )  THEN
109          OPEN( 90, FILE='PRECURSOR_OCEAN', FORM='FORMATTED' )
110          WRITE ( 90, '(''TRUE'')' )
111          CLOSE ( 90 )
112       ENDIF
113    ELSEIF ( i == 9 )  THEN
114
115!
116!--    Set a flag to identify runs with vertical nesting
117       vnested = .TRUE.
118       
119       comm_inter = MPI_COMM_WORLD
120       
121!
122!--    Split the total available PE's into two groups
123!--    numprocs for coarse and fine grid are read from stdin (see above, and
124!--    execution command in the palmrun script, numprocs are provided via
125!--    palmrun option -Y)
126       IF ( myid < bc_data(1) )  THEN
127          inter_color     = 0
128          numprocs        = bc_data(1)
129          coupling_mode   = 'vnested_crse'
130       ELSE
131          inter_color     = 1
132          numprocs        = bc_data(2)
133          coupling_mode   = 'vnested_fine'
134       ENDIF
135       
136       CALL MPI_COMM_SPLIT( MPI_COMM_WORLD, inter_color, 0, comm_palm, ierr )
137       comm2d = comm_palm
138       
139       OPEN( 90, FILE='VNESTING_PORT_OPENED', FORM='FORMATTED' )
140       WRITE ( 90, '(''TRUE'')' )
141       CLOSE ( 90 )
142     
143    ELSE
144       comm_inter = MPI_COMM_WORLD
145
146       IF ( myid < bc_data(1) ) THEN
147          inter_color     = 0
148          numprocs        = bc_data(1)
149          coupling_mode   = 'atmosphere_to_ocean'
150       ELSE
151          inter_color     = 1
152          numprocs        = bc_data(2)
153          coupling_mode   = 'ocean_to_atmosphere'
154       ENDIF
155
156       CALL MPI_COMM_SPLIT( MPI_COMM_WORLD, inter_color, 0, comm_palm, ierr )
157       comm2d = comm_palm
158
159!
160!--    Write a flag file for the ocean model and the other atmosphere
161!--    processes.
162       OPEN( 90, FILE='COUPLING_PORT_OPENED', FORM='FORMATTED' )
163       WRITE ( 90, '(''TRUE'')' )
164       CLOSE ( 90 )
165    ENDIF
166#endif
167
168!
169!-- In case of a precursor ocean run (followed by a coupled run), or a
170!-- coupled atmosphere-ocean run, set the file extension for the ocean files
171    IF ( TRIM( coupling_mode ) == 'ocean_to_atmosphere' .OR. bc_data(3) == 1 ) &
172    THEN
173       coupling_char = '_O'
174    ENDIF
175
176    IF (  TRIM( coupling_mode ) == 'vnested_fine' )  THEN
177!
178!-- Set file extension for vertical nesting
179       coupling_char = '_NV'
180    ENDIF
181
182 END SUBROUTINE init_coupling
Note: See TracBrowser for help on using the repository browser.