source: palm/trunk/SOURCE/init_coupling.f90 @ 2053

Last change on this file since 2053 was 2001, checked in by knoop, 8 years ago

last commit documented

  • Property svn:keywords set to Id
File size: 5.4 KB
Line 
1!> @file init_coupling.f90
2!------------------------------------------------------------------------------!
3! This file is part of PALM.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2016 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! -----------------
22!
23!
24! Former revisions:
25! ------------------
26! $Id: init_coupling.f90 2001 2016-08-20 18:41:22Z gronemeier $
27!
28! 2000 2016-08-20 18:09:15Z knoop
29! Forced header and separation lines into 80 columns
30!
31! 1808 2016-04-05 19:44:00Z raasch
32! routine local_getenv replaced by standard FORTRAN routine
33!
34! 1682 2015-10-07 23:56:08Z knoop
35! Code annotations made doxygen readable
36!
37! 1320 2014-03-20 08:40:49Z raasch
38! ONLY-attribute added to USE-statements,
39! kind-parameters added to all INTEGER and REAL declaration statements,
40! kinds are defined in new module kinds,
41! revision history before 2012 removed,
42! comment fields (!:) to be used for variable explanations added to
43! all variable declaration statements
44!
45! 1036 2012-10-22 13:43:42Z raasch
46! code put under GPL (PALM 3.9)
47!
48! 222 2009-01-12 16:04:16Z letzel
49! Initial revision
50!
51! Description:
52! ------------
53!> Initializing coupling via MPI-1 or MPI-2 if the coupled version of PALM is
54!> called.
55!------------------------------------------------------------------------------!
56  SUBROUTINE init_coupling
57 
58
59    USE control_parameters,                                                    &
60        ONLY:  coupling_char, coupling_mode
61       
62    USE kinds
63   
64    USE pegrid
65
66    IMPLICIT NONE
67
68!
69!-- Local variables
70    INTEGER(iwp) ::  i            !<
71    INTEGER(iwp) ::  inter_color  !<
72   
73    INTEGER(iwp), DIMENSION(:) ::  bc_data(0:3) = 0  !<
74
75!
76!-- Get information about the coupling mode from the environment variable
77!-- which has been set by the mpiexec command.
78!-- This method is currently not used because the mpiexec command is not
79!-- available on some machines
80!    CALL GET_ENVIRONMENT_VARIABLE( 'coupling_mode', coupling_mode, i )
81!    IF ( i == 0 )  coupling_mode = 'uncoupled'
82!    IF ( coupling_mode == 'ocean_to_atmosphere' )  coupling_char = '_O'
83
84!
85!-- Get information about the coupling mode from standard input (PE0 only) and
86!-- distribute it to the other PEs. If __mpi2 was defined, suggest a
87!-- coupling via MPI-2. Otherwise initate a coupling using MPI-1 only.
88!-- In this case, distribute PEs to 2 new communicators.
89!-- ATTENTION: numprocs will be reset according to the new communicators
90#if defined ( __parallel )
91
92!myid_absolut = myid
93    IF ( myid == 0 )  THEN
94       READ (*,*,ERR=10,END=10)  coupling_mode, bc_data(1), bc_data(2)
9510     CONTINUE
96#if defined( __mpi2 )
97       IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' )  THEN
98          i = 1
99       ELSEIF ( TRIM( coupling_mode ) == 'ocean_to_atmosphere' )  THEN
100          i = 2
101       ELSE
102          i = 0
103       ENDIF
104#else
105       IF ( TRIM( coupling_mode ) == 'coupled_run' )  THEN
106          i = 1
107       ELSE
108          i = 0
109       ENDIF
110#endif
111       bc_data(0) = i
112
113!
114!--    Check if '_O' has to be used as file extension in an uncoupled ocean
115!--    run. This is required, if this run shall be continued as a coupled run.
116       IF ( TRIM( coupling_mode ) == 'precursor_ocean' )  bc_data(3) = 1
117
118    ENDIF
119
120    CALL MPI_BCAST( bc_data(0), 4, MPI_INTEGER, 0, MPI_COMM_WORLD, ierr )
121    i = bc_data(0)
122
123#if defined ( __mpi2 )
124    IF ( i == 0 )  THEN
125       coupling_mode = 'uncoupled'
126    ELSEIF ( i == 1 )  THEN
127       coupling_mode = 'atmosphere_to_ocean'
128    ELSEIF ( i == 2 )  THEN
129       coupling_mode = 'ocean_to_atmosphere'
130    ENDIF
131    target_id = myid
132#else
133    IF ( i == 0 ) THEN
134       coupling_mode = 'uncoupled'
135!
136!--    In case of a precursor ocean run, an additional flag file is created.
137!--    This is necessary for data_output_2d_on_each_pe = .T.
138       IF ( bc_data(3) == 1 )  THEN
139          OPEN( 90, FILE='PRECURSOR_OCEAN', FORM='FORMATTED' )
140          WRITE ( 90, '(''TRUE'')' )
141          CLOSE ( 90 )
142       ENDIF
143    ELSE
144       comm_inter = MPI_COMM_WORLD
145
146       IF ( myid < bc_data(1) ) THEN
147          inter_color     = 0
148          numprocs        = bc_data(1)
149          coupling_mode   = 'atmosphere_to_ocean'
150       ELSE
151          inter_color     = 1
152          numprocs        = bc_data(2)
153          coupling_mode   = 'ocean_to_atmosphere'
154       ENDIF
155
156       CALL MPI_COMM_SPLIT( MPI_COMM_WORLD, inter_color, 0, comm_palm, ierr )
157       comm2d = comm_palm
158
159!
160!--    Write a flag file for the ocean model and the other atmosphere
161!--    processes.
162       OPEN( 90, FILE='COUPLING_PORT_OPENED', FORM='FORMATTED' )
163       WRITE ( 90, '(''TRUE'')' )
164       CLOSE ( 90 )
165    ENDIF
166#endif
167#endif
168
169!
170!-- In case of a precursor ocean run (followed by a coupled run), or a
171!-- coupled atmosphere-ocean run, set the file extension for the ocean files
172    IF ( TRIM( coupling_mode ) == 'ocean_to_atmosphere' .OR. bc_data(3) == 1 ) &
173    THEN
174       coupling_char = '_O'
175    ENDIF
176
177 END SUBROUTINE init_coupling
Note: See TracBrowser for help on using the repository browser.