Home

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 3629

Last change on this file since 3629 was 3597, checked in by maronga, 6 years ago
revised calculation of near surface air potential temperature
Property svn:keywords set to `Id`
File size: 69.8 KB

Line
1	!> @file indoor_model_mod.f90
2	!--------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 2018-2018 Leibniz Universitaet Hannover
18	! Copyright 2018-2018 Hochschule Offenburg
19	!--------------------------------------------------------------------------------!
20	!
21	! Current revisions:
22	! -----------------
23	!
24	!
25	! Former revisions:
26	! -----------------
27	! $Id: indoor_model_mod.f90 3597 2018-12-04 08:40:18Z maronga $
28	! Renamed t_surf_10cm to pt_10cm
29	!
30	! 3593 2018-12-03 13:51:13Z kanani
31	! Replace degree symbol by degree_C
32	!
33	! 3524 2018-11-14 13:36:44Z raasch
34	! working precision added to make code Fortran 2008 conform
35	!
36	! 3469 2018-10-30 20:05:07Z kanani
37	! Initial revision (tlang, suehring, kanani, srissman)
38	!
39	!
40	!
41	! Authors:
42	! --------
43	! @author Tobias Lang
44	! @author Jens Pfafferott
45	! @author Farah Kanani-Suehring
46	! @author Matthias Suehring
47	! @author Sascha RiÃmann
48	!
49	!
50	! Description:
51	! ------------
52	!> <Description of the new module>
53	!> Module for Indoor Climate Model (ICM)
54	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
55	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
56	!> This module differ between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine thermal comfort
57	!> the heat transfer between indoor and outdoor is simplified
58
59	!> @todo Replace window_area_per_facade by %frac(1,m) for window
60	!> @todo emissivity change for window blinds if solar_protection_on=1
61	!> @todo write datas in netcdf file as output data
62	!> @todo reduce the building volume with netto ground surface to take respect costruction areas like walls and ceilings. Have effect on factor_a, factor_c, airchange and lambda_at
63	!>
64	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
65	!> @note How to write indoor temperature output to pt array?
66	!>
67	!> @bug <Enter known bugs here>
68	!------------------------------------------------------------------------------!
69	MODULE indoor_model_mod
70
71	USE control_parameters, &
72	ONLY: initializing_actions
73
74	USE kinds
75
76	USE surface_mod, &
77	ONLY: surf_usm_h, surf_usm_v
78
79
80	IMPLICIT NONE
81
82	!
83	!-- Define data structure for buidlings.
84	TYPE build
85
86	INTEGER(iwp) :: id !< building ID
87	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
88	INTEGER(iwp) :: kb_max !< highest vertical index of a building
89	INTEGER(iwp) :: num_facades_per_building_h !< total number of horizontal facades elements
90	INTEGER(iwp) :: num_facades_per_building_h_l !< number of horizontal facade elements on local subdomain
91	INTEGER(iwp) :: num_facades_per_building_v !< total number of vertical facades elements
92	INTEGER(iwp) :: num_facades_per_building_v_l !< number of vertical facade elements on local subdomain
93
94	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
95	!< for vertical surfaces with building
96	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
97	!< horizontal surfaces with building
98	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
99	!< vertical surfaces with building
100	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
101	!< and height level
102	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
103	!< and height level
104
105	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
106
107	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
108	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
109	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
110	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
111	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
112
113	END TYPE build
114
115	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
116
117	INTEGER(iwp) :: num_build !< total number of buildings in domain
118
119	REAL(wp) :: volume_fraction
120
121	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< dummy array for indoor temperature for the
122	!< total building volume at each discrete height level
123	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< dummy array for indoor temperature for the
124	!< local building volume fraction at each discrete height level
125
126	!
127	!-- Declare all global variables within the module
128
129	INTEGER(iwp) :: building_type = 1 !< namelist parameter with
130	!< X1=construction year (cy) 1950, X2=cy 2000, X3=cy 2050
131	!< R=Residental building, O=Office, RW=Enlarged Windows, P=Panel type (Plattenbau) WBS 70, H=Hospital (in progress), I=Industrial halls (in progress), S=Special Building (in progress)
132	!< (0=R1, 1=R2, 2=R3, 3=O1, 4=O2, 5=O3,...)
133	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
134	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
135	INTEGER(iwp) :: solar_protection_off !< Solar protection off
136	INTEGER(iwp) :: solar_protection_on !< Solar protection on
137
138	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
139	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
140	REAL(wp) :: eff_mass_area !< [mÂ²] the effective mass-related area
141	REAL(wp) :: floor_area_per_facade !< [mÂ²] net floor area (Sum of all floors)
142	REAL(wp) :: total_area !<! [mÂ²] area of all surfaces pointing to zone
143	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
144	REAL(wp) :: air_change !< [1/h] Airflow
145	REAL(wp) :: bldg_part_surf_i = 4 !< [mÂ²_surf,i] part building surface, from Palm, das mÃŒsste mittlerweile "facade_element_area" sein!
146	REAL(wp) :: facade_element_area !< [mÂ²_facade] building surface facade
147	REAL(wp) :: indoor_volume_per_facade !< [mÂ³] indoor air volume per facade element
148	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
149	REAL(wp) :: dt_indoor = 3600.0_wp !< [s] namelist parameter: time interval for indoor-model application
150	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
151	REAL(wp) :: f_c_win !< [-] shading factor
152	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5 (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
153	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000 (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
154	REAL(wp) :: g_value_win !< [-] SHGC factor
155	REAL(wp) :: h_tr_1 !<! [W/K] Heat transfer coefficient auxiliary variable 1
156	REAL(wp) :: h_tr_2 !<! [W/K] Heat transfer coefficient auxiliary variable 2
157	REAL(wp) :: h_tr_3 !<! [W/K] Heat transfer coefficient auxiliary variable 3
158	REAL(wp) :: h_tr_em !<! [W/K] Heat transfer coefficient of the emmision (got with h_tr_ms the thermal mass)
159	REAL(wp) :: h_tr_is !<! [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
160	REAL(wp) :: h_tr_ms !<! [W/K] Heat transfer conductance term (got with h_tr_em the thermal mass)
161	REAL(wp) :: h_tr_op !<! [W/K] heat transfer coefficient of opaque components (assumption: got all thermal mass) contains of h_tr_em and h_tr_ms
162	REAL(wp) :: h_tr_w !<! [W/K] heat transfer coefficient of doors, windows, curtain walls and glazed walls (assumption: thermal mass=0)
163	REAL(wp) :: h_ve !<! [W/K] heat transfer of ventilation
164	REAL(wp) :: height_storey !< [m] storey heigth
165	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
166	REAL(wp) :: initial_indoor_temperature !< namelist parameter
167	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
168	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
169	REAL(wp) :: net_sw_in !< net short-wave radiation (in - out; was i_global --> CORRECT?)
170	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
171	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
172	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
173	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (negative)
174	REAL(wp) :: phi_hc_nd !<! [W] heating demand and/or cooling demand
175	REAL(wp) :: phi_hc_nd_10 !<! [W] heating demand and/or cooling demand for heating or cooling
176	REAL(wp) :: phi_hc_nd_ac !<! [W] actual heating demand and/or cooling demand
177	REAL(wp) :: phi_hc_nd_un !<! [W] unlimited heating demand and/or cooling demand which is necessary to reach the demanded required temperature (heating is positive, cooling is negative)
178	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
179	REAL(wp) :: phi_m !<! [W] mass specific thermal load (internal and external)
180	REAL(wp) :: phi_mtot !<! [W] total mass specific thermal load (internal and external)
181	REAL(wp) :: phi_sol !< [W] solar loads
182	REAL(wp) :: phi_st !<! [W] mass specific thermal load implied non thermal mass
183	REAL(wp) :: q_emission !< emissions, in first version = 0, option for second part of the project
184	REAL(wp) :: q_wall_win !< heat flux from indoor into wall/window
185	REAL(wp) :: q_waste_heat !< waste heat, sum of waste heat over the roof to Palm
186	REAL(wp) :: q_waste_heat_bldg !< [W/building] waste heat of the complete building, in Palm sum of all indoor_model-calculations
187	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
188	REAL(wp) :: schedule_d !< activation for internal loads (low or high + low)
189	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
190	REAL(wp) :: theta_air !<! [degree_C] air temperature of the RC-node
191	REAL(wp) :: theta_air_0 !<! [degree_C] air temperature of the RC-node in equilibrium
192	REAL(wp) :: theta_air_10 !<! [degree_C] air temperature of the RC-node from a heating capacity of 10 W/mÂ²
193	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
194	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
195	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
196	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
197	REAL(wp) :: theta_m !<! [degree_C} inner temperature of the RC-node
198	REAL(wp) :: theta_m_t !<! [degree_C] (Fictive) component temperature timestep
199	REAL(wp) :: theta_m_t_prev !< [degree_C] (Fictive) component temperature previous timestep (do not change)
200	REAL(wp) :: theta_op !< [degree_C] operative temperature
201	REAL(wp) :: theta_s !<! [degree_C] surface temperature of the RC-node
202	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
203	REAL(wp) :: time_utc_hour !< Time in hours per day (UTC)
204	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
205	REAL(wp) :: ventilation_int_loads !< Zuteilung der GebÃ€ude fÃŒr Verlauf/AktivitÃ€t der LÃŒftung und internen Lasten
206
207	!
208	!-- Declare all global parameters within the module
209	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly cooling 2.0_wp
210	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
211	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus Datenbank 27 window_area_per_facade_percent
212	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation on facade exceeds this value
213	REAL(wp), PARAMETER :: params_waste_heat_c = 4.0_wp !< [-] anthropogenic heat outputs for cooling e.g. 4 for KKM with COP = 3
214	REAL(wp), PARAMETER :: params_waste_heat_h = 1.111_wp !< [-] anthropogenic heat outputs for heating e.g. 1 / 0.9 = 1.111111 for combustion with eta = 0.9 or -3 for WP with COP = 4
215	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m^2 K)] h_is = 3.45 between surface and air (chap. 7.2.2.2)
216	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/K] h_ms = 9.10 W / (m2 K) between component and surface (chap. 12.2.2)
217
218	SAVE
219
220
221	PRIVATE
222
223	!
224	!-- Add INTERFACES that must be available to other modules
225	PUBLIC im_init, im_main_heatcool, im_parin
226
227	!
228	!-- Add VARIABLES that must be available to other modules
229	PUBLIC dt_indoor, skip_time_do_indoor, time_indoor
230
231	!
232	!-- Calculations for indoor temperatures
233	INTERFACE im_calc_temperatures
234	MODULE PROCEDURE im_calc_temperatures
235	END INTERFACE im_calc_temperatures
236	!
237	!-- Initialization actions
238	INTERFACE im_init
239	MODULE PROCEDURE im_init
240	END INTERFACE im_init
241
242	!
243	!-- Main part of indoor model
244	INTERFACE im_main_heatcool
245	MODULE PROCEDURE im_main_heatcool
246	END INTERFACE im_main_heatcool
247	!
248	!-- Reading of NAMELIST parameters
249	INTERFACE im_parin
250	MODULE PROCEDURE im_parin
251	END INTERFACE im_parin
252
253	CONTAINS
254
255	!------------------------------------------------------------------------------!
256	! Description:
257	! ------------
258	!< Calculation of the air temperatures and mean radiation temperature
259	!< This is basis for the operative temperature
260	!< Based on a Crank-Nicholson scheme with a timestep of a hour
261	!------------------------------------------------------------------------------!
262	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
263	near_facade_temperature, phi_hc_nd_dummy )
264
265	USE arrays_3d, &
266	ONLY: pt
267
268
269	IMPLICIT NONE
270
271
272	INTEGER(iwp) :: i
273	INTEGER(iwp) :: j
274	INTEGER(iwp) :: k
275
276	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
277	REAL(wp) :: near_facade_temperature
278	REAL(wp) :: phi_hc_nd_dummy
279
280	!< Calculation of total mass specific thermal load (internal and external)
281	phi_mtot = ( phi_m + h_tr_em * indoor_wall_window_temperature &
282	+ h_tr_3 * ( phi_st + h_tr_w * pt(k,j,i) &
283	+ h_tr_1 * &
284	( ( ( phi_ia + phi_hc_nd_dummy ) / h_ve ) &
285	+ near_facade_temperature ) &
286	) / h_tr_2 &
287	) !< [degree_C] Eq. (C.5)
288
289	!< Calculation of component temperature at factual timestep
290	theta_m_t = ( ( theta_m_t_prev &
291	* ( ( c_m / 3600 ) - 0.5 * ( h_tr_3 + h_tr_em ) ) + phi_mtot &
292	) &
293	/ ( ( c_m / 3600 ) + 0.5 * ( h_tr_3 + h_tr_em ) ) &
294	) !< [degree_C] Eq. (C.4)
295
296	!< Calculation of mean inner temperature for the RC-node in actual timestep
297	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5 !< [degree_C] Eq. (C.9)
298
299	!< Calculation of mean surface temperature of the RC-node in actual timestep
300	theta_s = ( ( h_tr_ms * theta_m + phi_st + h_tr_w * pt(k,j,i) &
301	+ h_tr_1 * ( near_facade_temperature + ( phi_ia + phi_hc_nd_dummy ) / h_ve ) &
302	) &
303	/ ( h_tr_ms + h_tr_w + h_tr_1 ) &
304	) !< [degree_C] Eq. (C.10)
305
306	!< Calculation of the air temperature of the RC-node
307	theta_air = ( h_tr_is * theta_s + h_ve * near_facade_temperature &
308	+ phi_ia + phi_hc_nd_dummy ) / ( h_tr_is + h_ve ) !< [degree_C] Eq. (C.11)
309
310	END SUBROUTINE im_calc_temperatures
311
312	!------------------------------------------------------------------------------!
313	! Description:
314	! ------------
315	!> Initialization of the indoor model.
316	!> Static information are calculated here, e.g. building parameters and
317	!> geometrical information, everything that doesn't change in time.
318	!
319	!-- Input values
320	!-- Input datas from Palm, M4
321	! i_global --> net_sw_in !global radiation [W/m2]
322	! theta_e --> pt(k,j,i) !undisturbed outside temperature, 1. PALM volume, for windows
323	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
324	! surf_usm_v(l)%pt_10cm(m) !Air temperature, facade near (10cm) air temperature from 1. Palm volume
325	! theta_node --> t_wall_h(nzt_wall,m)
326	! t_wall_v(l)%t(nzt_wall,m) !Temperature of innermost wall layer, for opaque wall
327	!------------------------------------------------------------------------------!
328	SUBROUTINE im_init
329
330	USE arrays_3d, &
331	ONLY: dzw
332
333	USE control_parameters, &
334	ONLY: message_string
335
336	USE indices, &
337	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_0
338
339	USE grid_variables, &
340	ONLY: dx, dy
341
342	USE netcdf_data_input_mod, &
343	ONLY: building_id_f
344
345	USE pegrid
346
347	USE surface_mod, &
348	ONLY: surf_usm_h, surf_usm_v
349
350	USE urban_surface_mod, &
351	ONLY: building_pars, building_type
352
353	IMPLICIT NONE
354
355	INTEGER(iwp) :: fa !< running index for facade elements of each building
356	INTEGER(iwp) :: i !< running index along x-direction
357	INTEGER(iwp) :: j !< running index along y-direction
358	INTEGER(iwp) :: k !< running index along z-direction
359	INTEGER(iwp) :: l !< running index for surface-element orientation
360	INTEGER(iwp) :: m !< running index surface elements
361	INTEGER(iwp) :: n !< building index
362	INTEGER(iwp) :: nb !< building index
363
364	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
365	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
366	!< multiple occurences are sorted out
367	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
368	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
369	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
370	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
371	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
372	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
373	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
374	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
375	!< horizontal facade elements
376	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
377	!< vertical facade elements
378	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
379	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
380
381	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
382	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
383
384	REAL(wp), DIMENSION(:), ALLOCATABLE :: local_weight !< dummy representing fraction of local on total building volume,
385	!< height dependent
386	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
387	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
388	!< on local subdomain
389
390	!
391	!-- Initializing of indoor model is only possible if buildings can be
392	!-- distinguished by their IDs.
393	IF ( .NOT. building_id_f%from_file ) THEN
394	message_string = 'Indoor model requires information about building_id'
395	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
396	ENDIF
397	!
398	!-- Determine number of different building IDs on local subdomain.
399	num_buildings_l = 0
400	num_buildings = 0
401	ALLOCATE( build_ids_l(1) )
402	DO i = nxl, nxr
403	DO j = nys, nyn
404	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
405	IF ( num_buildings_l(myid) > 0 ) THEN
406	IF ( ANY( building_id_f%var(j,i) .EQ. build_ids_l ) ) THEN
407	CYCLE
408	ELSE
409	num_buildings_l(myid) = num_buildings_l(myid) + 1
410	!
411	!-- Resize array with different local building ids
412	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
413	build_ids_l_tmp = build_ids_l
414	DEALLOCATE( build_ids_l )
415	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
416	build_ids_l(1:num_buildings_l(myid)-1) = &
417	build_ids_l_tmp(1:num_buildings_l(myid)-1)
418	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
419	DEALLOCATE( build_ids_l_tmp )
420	ENDIF
421	!
422	!-- First occuring building id on PE
423	ELSE
424	num_buildings_l(myid) = num_buildings_l(myid) + 1
425	build_ids_l(1) = building_id_f%var(j,i)
426	ENDIF
427	ENDIF
428	ENDDO
429	ENDDO
430	!
431	!-- Determine number of building IDs for the entire domain. (Note, building IDs
432	!-- can appear multiple times as buildings might be distributed over several
433	!-- PEs.)
434	#if defined( __parallel )
435	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, &
436	MPI_INTEGER, MPI_SUM, comm2d, ierr )
437	#else
438	num_buildings = num_buildings_l
439	#endif
440	ALLOCATE( build_ids(1:SUM(num_buildings)) )
441	!
442	!-- Gather building IDs. Therefore, first, determine displacements used
443	!-- required for MPI_GATHERV call.
444	ALLOCATE( displace_dum(0:numprocs-1) )
445	displace_dum(0) = 0
446	DO i = 1, numprocs-1
447	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
448	ENDDO
449
450	#if defined( __parallel )
451	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
452	num_buildings(myid), &
453	MPI_INTEGER, &
454	build_ids, &
455	num_buildings, &
456	displace_dum, &
457	MPI_INTEGER, &
458	comm2d, ierr )
459
460	DEALLOCATE( displace_dum )
461
462	#else
463	build_ids = build_ids_l
464	#endif
465	!
466	!-- Note: in parallel mode, building IDs can occur mutliple times, as
467	!-- each PE has send its own ids. Therefore, sort out building IDs which
468	!-- appear multiple times.
469	num_build = 0
470	DO n = 1, SIZE(build_ids)
471
472	IF ( ALLOCATED(build_ids_final) ) THEN
473	IF ( ANY( build_ids(n) .EQ. build_ids_final ) ) THEN !FK: Warum ANY?, Warum .EQ.? --> s.o
474	CYCLE
475	ELSE
476	num_build = num_build + 1
477	!
478	!-- Resize
479	ALLOCATE( build_ids_final_tmp(1:num_build) )
480	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
481	DEALLOCATE( build_ids_final )
482	ALLOCATE( build_ids_final(1:num_build) )
483	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
484	build_ids_final(num_build) = build_ids(n)
485	DEALLOCATE( build_ids_final_tmp )
486	ENDIF
487	ELSE
488	num_build = num_build + 1
489	ALLOCATE( build_ids_final(1:num_build) )
490	build_ids_final(num_build) = build_ids(n)
491	ENDIF
492	ENDDO
493
494	!
495	!-- Allocate building-data structure array. Note, this is a global array
496	!-- and all building IDs on domain are known by each PE. Further attributes,
497	!-- e.g. height-dependent arrays, however, are only allocated on PEs where
498	!-- the respective building is present (in order to reduce memory demands).
499	ALLOCATE( buildings(1:num_build) )
500	!
501	!-- Store building IDs and check if building with certain ID is present on
502	!-- subdomain.
503	DO nb = 1, num_build
504	buildings(nb)%id = build_ids_final(nb)
505
506	IF ( ANY( building_id_f%var == buildings(nb)%id ) ) &
507	buildings(nb)%on_pe = .TRUE.
508	ENDDO
509	!
510	!-- Determine the maximum vertical dimension occupied by each building.
511	ALLOCATE( k_min_l(1:num_build) )
512	ALLOCATE( k_max_l(1:num_build) )
513	k_min_l = nzt + 1
514	k_max_l = 0
515
516	DO i = nxl, nxr
517	DO j = nys, nyn
518	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
519	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
520	DIM = 1 )
521	DO k = nzb+1, nzt+1
522	!
523	!-- Check if grid point belongs to a building.
524	IF ( BTEST( wall_flags_0(k,j,i), 6 ) ) THEN
525	k_min_l(nb) = MIN( k_min_l(nb), k )
526	k_max_l(nb) = MAX( k_max_l(nb), k )
527	ENDIF
528
529	ENDDO
530	ENDIF
531	ENDDO
532	ENDDO
533
534	DO nb = 1, num_build
535	#if defined( __parallel )
536	CALL MPI_ALLREDUCE( k_min_l(nb), buildings(nb)%kb_min, 1, MPI_INTEGER, &
537	MPI_MIN, comm2d, ierr )
538	CALL MPI_ALLREDUCE( k_max_l(nb), buildings(nb)%kb_max, 1, MPI_INTEGER, &
539	MPI_MAX, comm2d, ierr )
540	#else
541	buildings(nb)%kb_min = k_min_l(nb)
542	buildings(nb)%kb_max = k_max_l(nb)
543	#endif
544
545	ENDDO
546
547	DEALLOCATE( k_min_l )
548	DEALLOCATE( k_max_l )
549	!
550	!-- Calculate building volume
551	DO nb = 1, num_build
552	!
553	!-- Allocate temporary array for summing-up building volume
554	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
555	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
556	volume = 0.0_wp
557	volume_l = 0.0_wp
558	!
559	!-- Calculate building volume per height level on each PE where
560	!-- these building is present.
561	IF ( buildings(nb)%on_pe ) THEN
562	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
563	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
564	buildings(nb)%volume = 0.0_wp
565	buildings(nb)%vol_frac = 0.0_wp
566
567	IF ( ANY( building_id_f%var == buildings(nb)%id ) ) THEN
568	DO i = nxl, nxr
569	DO j = nys, nyn
570	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
571	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
572	volume_l(k) = dx * dy * dzw(k)
573	ENDDO
574	ENDDO
575	ENDDO
576	ENDIF
577	ENDIF
578	!
579	!-- Sum-up building volume from all subdomains
580	#if defined( __parallel )
581	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, &
582	comm2d, ierr )
583	#else
584	volume = volume_l
585	#endif
586	!
587	!-- Save total building volume as well as local fraction on volume on
588	!-- building data structure.
589	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
590	!
591	!-- Determine fraction of local on total building volume
592	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
593
594	DEALLOCATE( volume )
595	DEALLOCATE( volume_l )
596
597	ENDDO
598
599	!
600	!-- Allocate arrays for indoor temperature.
601	DO nb = 1, num_build
602	IF ( buildings(nb)%on_pe ) THEN
603	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
604	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
605	buildings(nb)%t_in = 0.0_wp
606	buildings(nb)%t_in_l = 0.0_wp
607	ENDIF
608	ENDDO
609	!
610	!-- Allocate arrays for number of facades per height level. Distinguish between
611	!-- horizontal and vertical facades.
612	DO nb = 1, num_build
613	IF ( buildings(nb)%on_pe ) THEN
614	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
615	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
616
617	buildings(nb)%num_facade_h = 0
618	buildings(nb)%num_facade_v = 0
619	ENDIF
620	ENDDO
621	!
622	!-- Determine number of facade elements per building on local subdomain.
623	!-- Distinguish between horizontal and vertical facade elements.
624	!
625	!-- Horizontal facades
626	buildings(:)%num_facades_per_building_h_l = 0
627	DO m = 1, surf_usm_h%ns
628	!
629	!-- For the current facade element determine corresponding building index.
630	!-- First, obtain j,j,k indices of the building. Please note the
631	!-- offset between facade/surface element and building location (for
632	!-- horizontal surface elements the horizontal offsets are zero).
633	i = surf_usm_h%i(m) + surf_usm_h%ioff
634	j = surf_usm_h%j(m) + surf_usm_h%joff
635	k = surf_usm_h%k(m) + surf_usm_h%koff
636	!
637	!-- Determine building index and check whether building is on PE
638	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
639	IF ( buildings(nb)%on_pe ) THEN
640	!
641	!-- Count number of facade elements at each height level.
642	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
643	!
644	!-- Moreover, sum up number of local facade elements per building.
645	buildings(nb)%num_facades_per_building_h_l = &
646	buildings(nb)%num_facades_per_building_h_l + 1
647	ENDIF
648	ENDDO
649	!
650	!-- Vertical facades
651	buildings(:)%num_facades_per_building_v_l = 0
652	DO l = 0, 3
653	DO m = 1, surf_usm_v(l)%ns
654	!
655	!-- For the current facade element determine corresponding building index.
656	!-- First, obtain j,j,k indices of the building. Please note the
657	!-- offset between facade/surface element and building location (for
658	!-- vertical surface elements the vertical offsets are zero).
659	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
660	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
661	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
662
663	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
664	DIM = 1 )
665	IF ( buildings(nb)%on_pe ) THEN
666	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
667	buildings(nb)%num_facades_per_building_v_l = &
668	buildings(nb)%num_facades_per_building_v_l + 1
669	ENDIF
670	ENDDO
671	ENDDO
672
673	!
674	!-- Determine total number of facade elements per building and assign number to
675	!-- building data type.
676	DO nb = 1, num_build
677	!
678	!-- Allocate dummy array used for summing-up facade elements.
679	!-- Please note, dummy arguments are necessary as building-date type
680	!-- arrays are not necessarily allocated on all PEs.
681	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
682	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
683	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
684	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
685	num_facades_h = 0
686	num_facades_v = 0
687	receive_dum_h = 0
688	receive_dum_v = 0
689
690	IF ( buildings(nb)%on_pe ) THEN
691	num_facades_h = buildings(nb)%num_facade_h
692	num_facades_v = buildings(nb)%num_facade_v
693	ENDIF
694
695	#if defined( __parallel )
696	CALL MPI_ALLREDUCE( num_facades_h, &
697	receive_dum_h, &
698	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
699	MPI_INTEGER, &
700	MPI_SUM, &
701	comm2d, &
702	ierr )
703
704	CALL MPI_ALLREDUCE( num_facades_v, &
705	receive_dum_v, &
706	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
707	MPI_INTEGER, &
708	MPI_SUM, &
709	comm2d, &
710	ierr )
711	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) & !FK: Was wenn not allocated? --> s.o.
712	buildings(nb)%num_facade_h = receive_dum_h
713	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) &
714	buildings(nb)%num_facade_v = receive_dum_v
715	#else
716	buildings(nb)%num_facade_h = num_facades_h
717	buildings(nb)%num_facade_v = num_facades_v
718	#endif
719	!
720	!-- Deallocate dummy arrays
721	DEALLOCATE( num_facades_h )
722	DEALLOCATE( num_facades_v )
723	DEALLOCATE( receive_dum_h )
724	DEALLOCATE( receive_dum_v )
725	!
726	!-- Allocate index arrays which link facade elements with surface-data type.
727	!-- Please note, no height levels are considered here (information is stored
728	!-- in surface-data type itself).
729	IF ( buildings(nb)%on_pe ) THEN
730	!
731	!-- Determine number of facade elements per building.
732	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
733	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
734	!
735	!-- Allocate arrays which link the building with the horizontal and vertical
736	!-- urban-type surfaces. Please note, linking arrays are allocated over all
737	!-- facade elements, which is required in case a building is located at the
738	!-- subdomain boundaries, where the building and the corresponding surface
739	!-- elements are located on different subdomains.
740	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
741
742	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
743	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
744	ENDIF
745	!
746	!-- Determine volume per facade element (vpf)
747	IF ( buildings(nb)%on_pe ) THEN
748	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
749
750	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
751	buildings(nb)%vpf(k) = buildings(nb)%volume(k) / &
752	( buildings(nb)%num_facade_h(k) + &
753	buildings(nb)%num_facade_v(k) )
754	ENDDO
755	ENDIF
756	ENDDO
757	!
758	!-- Link facade elements with surface data type.
759	!-- Allocate array for counting.
760	ALLOCATE( n_fa(1:num_build) )
761	n_fa = 1
762
763	DO m = 1, surf_usm_h%ns
764	i = surf_usm_h%i(m) + surf_usm_h%ioff
765	j = surf_usm_h%j(m) + surf_usm_h%joff
766
767	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
768
769	buildings(nb)%m_h(n_fa(nb)) = m
770	n_fa(nb) = n_fa(nb) + 1
771	ENDDO
772
773	n_fa = 1
774	DO l = 0, 3
775	DO m = 1, surf_usm_v(l)%ns
776	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
777	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
778
779	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
780
781	buildings(nb)%l_v(n_fa(nb)) = l
782	buildings(nb)%m_v(n_fa(nb)) = m
783	n_fa(nb) = n_fa(nb) + 1
784	ENDDO
785	ENDDO
786	DEALLOCATE( n_fa )
787
788	!
789	!-- Building parameters by type of building. Assigned in urban_surface_mod.f90
790
791	lambda_layer3 = building_pars(63, building_type)
792	s_layer3 = building_pars(57, building_type)
793	f_c_win = building_pars(119, building_type)
794	g_value_win = building_pars(120, building_type)
795	u_value_win = building_pars(121, building_type)
796	air_change_low = building_pars(122, building_type)
797	air_change_high = building_pars(123, building_type)
798	eta_ve = building_pars(124, building_type)
799	factor_a = building_pars(125, building_type)
800	factor_c = building_pars(126, building_type)
801	lambda_at = building_pars(127, building_type)
802	theta_int_h_set = building_pars(118, building_type)
803	theta_int_c_set = building_pars(117, building_type)
804	phi_h_max = building_pars(128, building_type)
805	phi_c_max = building_pars(129, building_type)
806	qint_high = building_pars(130, building_type)
807	qint_low = building_pars(131, building_type)
808	height_storey = building_pars(132, building_type)
809	height_cei_con = building_pars(133, building_type)
810
811	!
812	!-- Setting of initial room temperature [K]
813	!-- (after first loop, use theta_m_t as theta_m_t_prev)
814	theta_m_t_prev = initial_indoor_temperature
815
816
817	END SUBROUTINE im_init
818
819
820	!------------------------------------------------------------------------------!
821	! Description:
822	! ------------
823	!> Main part of the indoor model.
824	!> Calculation of .... (kanani: Please describe)
825	!------------------------------------------------------------------------------!
826	SUBROUTINE im_main_heatcool
827
828	USE arrays_3d, &
829	ONLY: ddzw, dzw
830
831	USE basic_constants_and_equations_mod, &
832	ONLY: c_p
833
834	USE control_parameters, &
835	ONLY: rho_surface
836
837	USE date_and_time_mod, &
838	ONLY: time_utc
839
840	USE grid_variables, &
841	ONLY: dx, dy
842
843	USE pegrid
844
845	USE surface_mod, &
846	ONLY: ind_veg_wall, ind_wat_win, surf_usm_h, surf_usm_v
847
848	USE urban_surface_mod, &
849	ONLY: nzt_wall, t_wall_h, t_wall_v, t_window_h, t_window_v, &
850	building_type
851
852
853	IMPLICIT NONE
854
855	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
856	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
857	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
858	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
859	INTEGER(iwp) :: l !< running index for surface-element orientation
860	INTEGER(iwp) :: m !< running index surface elements
861	INTEGER(iwp) :: nb !< running index for buildings
862	INTEGER(iwp) :: fa !< running index for facade elements of each building
863
864	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
865	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
866	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
867
868	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
869	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
870
871	!
872	!-- Daily schedule, here for 08:00-18:00 = 1, other hours = 0.
873	!-- time_utc_hour is calculated here based on time_utc [s] from
874	!-- date_and_time_mod.
875	!-- (kanani: Does this schedule not depend on if it's an office or resident
876	!-- building?)
877	time_utc_hour = time_utc / 3600.0_wp
878
879	!
880	!-- Allocation of the load profiles to the building types
881	!-- Residental Building, panel WBS 70
882	if (building_type == 1 .OR. &
883	building_type == 2 .OR. &
884	building_type == 3 .OR. &
885	building_type == 10 .OR. &
886	building_type == 11 .OR. &
887	building_type == 12) then
888	ventilation_int_loads = 1
889	!-- Office, building with large windows
890	else if (building_type == 4 .OR. &
891	building_type == 5 .OR. &
892	building_type == 6 .OR. &
893	building_type == 7 .OR. &
894	building_type == 8 .OR. &
895	building_type == 9) then
896	ventilation_int_loads = 2
897	!-- Industry, hospitals
898	else if (building_type == 13 .OR. &
899	building_type == 14 .OR. &
900	building_type == 15 .OR. &
901	building_type == 16 .OR. &
902	building_type == 17 .OR. &
903	building_type == 18) then
904	ventilation_int_loads = 3
905
906	end if
907
908	!-- Residental Building, panel WBS 70
909
910	if (ventilation_int_loads == 1) THEN
911	if ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 8.0_wp ) THEN
912	schedule_d = 1
913	else if ( time_utc_hour >= 18.0_wp .AND. time_utc_hour <= 23.0_wp ) THEN
914	schedule_d = 1
915	else
916	schedule_d = 0
917	end if
918	end if
919
920	!-- Office, building with large windows
921
922	if (ventilation_int_loads == 2) THEN
923	if ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
924	schedule_d = 1
925	else
926	schedule_d = 0
927	end if
928	end if
929
930	!-- Industry, hospitals
931	if (ventilation_int_loads == 3) THEN
932	if ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
933	schedule_d = 1
934	else
935	schedule_d = 0
936	end if
937	end if
938
939
940	!
941	!-- Following calculations must be done for each facade element.
942	DO nb = 1, num_build
943	!
944	!-- First, check whether building is present on local subdomain.
945	IF ( buildings(nb)%on_pe ) THEN
946	!
947	!-- Initialize/reset indoor temperature
948	buildings(nb)%t_in = 0.0_wp
949	buildings(nb)%t_in_l = 0.0_wp
950	!
951	!-- Horizontal surfaces
952	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
953	!
954	!-- Determine index where corresponding surface-type information
955	!-- is stored.
956	m = buildings(nb)%m_h(fa)
957	!
958	!-- Determine building height level index.
959	kk = surf_usm_h%k(m) + surf_usm_h%koff
960	!
961	!-- Building geometries --> not time-dependent
962	facade_element_area = dx * dy !< [m2] surface area per facade element
963	floor_area_per_facade = buildings(nb)%vpf(kk) * ddzw(kk) !< [m2] net floor area per facade element
964	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3] indoor air volume per facade element
965	window_area_per_facade = surf_usm_h%frac(ind_wat_win,m) * facade_element_area !< [m2] window area per facade element
966	eff_mass_area = factor_a * floor_area_per_facade !< [m2] standard values according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
967	c_m = factor_c * floor_area_per_facade !< [J/K] standard values according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
968	total_area = lambda_at * floor_area_per_facade !< [m2] area of all surfaces pointing to zone Eq. (9) according to section 7.2.2.2
969
970	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
971	h_tr_w = window_area_per_facade * u_value_win !< [W/K] only for windows
972	h_tr_is = total_area * h_is !< [W/K] with h_is = 3.45 W / (m2 K) between surface and air, Eq. (9)
973	h_tr_ms = eff_mass_area * h_ms !< [W/K] with h_ms = 9.10 W / (m2 K) between component and surface, Eq. (64)
974	h_tr_op = 1 / ( 1 / ( ( facade_element_area - window_area_per_facade ) &
975	* lambda_layer3 / s_layer3 * 0.5 ) + 1 / h_tr_ms )
976	h_tr_em = 1 / ( 1 / h_tr_op - 1 / h_tr_ms ) !< [W/K] Eq. (63), Section 12.2.2
977	!
978	!-- internal air loads dependent on the occupacy of the room
979	!-- basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int)
980	phi_ia = 0.5 * ( ( qint_high * schedule_d + qint_low ) &
981	* floor_area_per_facade ) !< [W] Eq. (C.1)
982	!
983	!-- Airflow dependent on the occupacy of the room
984	!-- basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
985	air_change = ( air_change_high * schedule_d + air_change_low ) !< [1/h]?
986	!
987	!-- Heat transfer of ventilation
988	!-- not less than 0.01 W/K to provide division by 0 in further calculations
989	!-- with heat capacity of air 0.33 Wh/m2K
990	h_ve = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
991	0.33_wp * (1 - eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
992
993	!-- Heat transfer coefficient auxiliary variables
994	h_tr_1 = 1 / ( ( 1 / h_ve ) + ( 1 / h_tr_is ) ) !< [W/K] Eq. (C.6)
995	h_tr_2 = h_tr_1 + h_tr_w !< [W/K] Eq. (C.7)
996	h_tr_3 = 1 / ( ( 1 / h_tr_2 ) + ( 1 / h_tr_ms ) ) !< [W/K] Eq. (C.8)
997	!
998	!-- Net short-wave radiation through window area (was i_global)
999	net_sw_in = surf_usm_h%rad_sw_in(m) - surf_usm_h%rad_sw_out(m)
1000	!
1001	!-- Quantities needed for im_calc_temperatures
1002	i = surf_usm_h%i(m)
1003	j = surf_usm_h%j(m)
1004	k = surf_usm_h%k(m)
1005	near_facade_temperature = surf_usm_h%pt_10cm(m)
1006	indoor_wall_window_temperature = &
1007	surf_usm_h%frac(ind_veg_wall,m) * t_wall_h(nzt_wall,m) &
1008	+ surf_usm_h%frac(ind_wat_win,m) * t_window_h(nzt_wall,m)
1009	!
1010	!-- Solar thermal gains. If net_sw_in larger than sun-protection
1011	!-- threshold parameter (params_solar_protection), sun protection will
1012	!-- be activated
1013	IF ( net_sw_in <= params_solar_protection ) THEN
1014	solar_protection_off = 1
1015	solar_protection_on = 0
1016	ELSE
1017	solar_protection_off = 0
1018	solar_protection_on = 1
1019	ENDIF
1020	!
1021	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on automatic sun protection
1022	!-- DIN 4108 - 2 chap.8
1023	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
1024	+ window_area_per_facade * net_sw_in * f_c_win * solar_protection_on ) &
1025	* g_value_win * ( 1 - params_f_f ) * params_f_w !< [W]
1026	!
1027	!-- Calculation of the mass specific thermal load for internal and external heatsources of the inner node
1028	phi_m = (eff_mass_area / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
1029	!
1030	!-- Calculation mass specific thermal load implied non thermal mass
1031	phi_st = ( 1 - ( eff_mass_area / total_area ) - ( h_tr_w / ( 9.1 * total_area ) ) ) &
1032	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with phi_ia=0,5*phi_int
1033	!
1034	!-- Calculations for deriving indoor temperature and heat flux into the wall
1035	!-- Step 1: Indoor temperature without heating and cooling
1036	!-- section C.4.1 Picture C.2 zone 3)
1037	phi_hc_nd = 0
1038
1039	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1040	near_facade_temperature, phi_hc_nd )
1041	!
1042	!-- If air temperature between border temperatures of heating and cooling, assign output variable, then ready
1043	IF ( theta_int_h_set <= theta_air .AND. theta_air <= theta_int_c_set ) THEN
1044	phi_hc_nd_ac = 0
1045	phi_hc_nd = phi_hc_nd_ac
1046	theta_air_ac = theta_air
1047	!
1048	!-- Step 2: Else, apply 10 W/mÂ² heating/cooling power and calculate indoor temperature
1049	!-- again.
1050	ELSE
1051	!
1052	!-- Temperature not correct, calculation method according to section C4.2
1053	theta_air_0 = theta_air !< Note temperature without heating/cooling
1054
1055	!-- Heating or cooling?
1056	IF ( theta_air > theta_int_c_set ) THEN
1057	theta_air_set = theta_int_c_set
1058	ELSE
1059	theta_air_set = theta_int_h_set
1060	ENDIF
1061
1062	!-- Calculate the temperature with phi_hc_nd_10
1063	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
1064	phi_hc_nd = phi_hc_nd_10
1065
1066	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1067	near_facade_temperature, phi_hc_nd )
1068
1069	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
1070	!
1071
1072	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
1073	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
1074
1075
1076
1077	!-- Step 3: With temperature ratio to determine the heating or cooling capacity
1078	!-- If necessary, limit the power to maximum power
1079	!-- section C.4.1 Picture C.2 zone 2) and 4)
1080	IF ( phi_c_max < phi_hc_nd_un .AND. phi_hc_nd_un < phi_h_max ) THEN
1081	phi_hc_nd_ac = phi_hc_nd_un
1082	phi_hc_nd = phi_hc_nd_un
1083	ELSE
1084	!-- Step 4: Inner temperature with maximum heating (phi_hc_nd_un positive) or cooling (phi_hc_nd_un negative)
1085	!-- section C.4.1 Picture C.2 zone 1) and 5)
1086	IF ( phi_hc_nd_un > 0 ) THEN
1087	phi_hc_nd_ac = phi_h_max !< Limit heating
1088	ELSE
1089	phi_hc_nd_ac = phi_c_max !< Limit cooling
1090	ENDIF
1091	ENDIF
1092
1093	phi_hc_nd = phi_hc_nd_ac
1094	!
1095	!-- Calculate the temperature with phi_hc_nd_ac (new)
1096	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1097	near_facade_temperature, phi_hc_nd )
1098
1099	theta_air_ac = theta_air
1100
1101	ENDIF
1102	!
1103	!-- Update theta_m_t_prev
1104	theta_m_t_prev = theta_m_t
1105	!
1106	!-- Calculate the operating temperature with weighted mean temperature of air and mean solar temperature
1107	!-- Will be used for thermal comfort calculations
1108	theta_op = 0.3 * theta_air_ac + 0.7 * theta_s !< [degree_C] operative Temperature Eq. (C.12)
1109	!
1110	!-- Heat flux into the wall. Value needed in urban_surface_mod to
1111	!-- calculate heat transfer through wall layers towards the facade
1112	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
1113	q_wall_win = h_tr_ms * ( theta_s - theta_m ) &
1114	/ ( facade_element_area &
1115	- window_area_per_facade )
1116	!
1117	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
1118	surf_usm_h%iwghf_eb(m) = q_wall_win
1119	surf_usm_h%iwghf_eb_window(m) = q_wall_win
1120	!
1121	!-- Sum up operational indoor temperature per kk-level. Further below,
1122	!-- this temperature is reduced by MPI to one temperature per kk-level
1123	!-- and building (processor overlapping)
1124	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
1125	!
1126	!-- Calculation of waste heat
1127	!-- Anthropogenic heat output
1128	IF ( phi_hc_nd_ac > 0 ) THEN
1129	heating_on = 1
1130	cooling_on = 0
1131	ELSE
1132	heating_on = 0
1133	cooling_on = 1
1134	ENDIF
1135
1136	q_waste_heat = (phi_hc_nd * (params_waste_heat_h * heating_on + params_waste_heat_c * cooling_on)) !< [W/m2] anthropogenic heat output
1137	! surf_usm_h%shf(m)=q_waste_heat
1138
1139	ENDDO !< Horizontal surfaces loop
1140	!
1141	!-- Vertical surfaces
1142	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
1143	!
1144	!-- Determine indices where corresponding surface-type information
1145	!-- is stored.
1146	l = buildings(nb)%l_v(fa)
1147	m = buildings(nb)%m_v(fa)
1148	!
1149	!-- Determine building height level index.
1150	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
1151	!
1152	!-- Building geometries --> not time-dependent
1153	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk) !< [m2] surface area per facade element
1154	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk) !< [m2] surface area per facade element
1155	floor_area_per_facade = buildings(nb)%vpf(kk) * ddzw(kk) !< [m2] net floor area per facade element
1156	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3] indoor air volume per facade element
1157	window_area_per_facade = surf_usm_v(l)%frac(ind_wat_win,m) * facade_element_area !< [m2] window area per facade element
1158	eff_mass_area = factor_a * floor_area_per_facade !< [m2] standard values according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
1159	c_m = factor_c * floor_area_per_facade !< [J/K] standard values according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
1160	total_area = lambda_at * floor_area_per_facade !< [m2] area of all surfaces pointing to zone Eq. (9) according to section 7.2.2.2
1161	!
1162	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
1163	h_tr_w = window_area_per_facade * u_value_win !< [W/K] only for windows
1164	h_tr_is = total_area * h_is !< [W/K] with h_is = 3.45 W / (m2 K) between surface and air, Eq. (9)
1165	h_tr_ms = eff_mass_area * h_ms !< [W/K] with h_ms = 9.10 W / (m2 K) between component and surface, Eq. (64)
1166	h_tr_op = 1 / ( 1 / ( ( facade_element_area - window_area_per_facade ) &
1167	* lambda_layer3 / s_layer3 * 0.5 ) + 1 / h_tr_ms )
1168	h_tr_em = 1 / ( 1 / h_tr_op - 1 / h_tr_ms ) !< [W/K] Eq. (63), Section 12.2.2
1169	!
1170	!-- internal air loads dependent on the occupacy of the room
1171	!-- basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int)
1172	phi_ia = 0.5 * ( ( qint_high * schedule_d + qint_low ) &
1173	* floor_area_per_facade ) !< [W] Eq. (C.1)
1174	!
1175	!-- Airflow dependent on the occupacy of the room
1176	!-- basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
1177	air_change = ( air_change_high * schedule_d + air_change_low )
1178	!
1179	!-- Heat transfer of ventilation
1180	!-- not less than 0.01 W/K to provide division by 0 in further calculations
1181	!-- with heat capacity of air 0.33 Wh/m2K
1182	h_ve = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
1183	0.33_wp * (1 - eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
1184
1185	!-- Heat transfer coefficient auxiliary variables
1186	h_tr_1 = 1 / ( ( 1 / h_ve ) + ( 1 / h_tr_is ) ) !< [W/K] Eq. (C.6)
1187	h_tr_2 = h_tr_1 + h_tr_w !< [W/K] Eq. (C.7)
1188	h_tr_3 = 1 / ( ( 1 / h_tr_2 ) + ( 1 / h_tr_ms ) ) !< [W/K] Eq. (C.8)
1189	!
1190	!-- Net short-wave radiation through window area (was i_global)
1191	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
1192	!
1193	!-- Quantities needed for im_calc_temperatures
1194	i = surf_usm_v(l)%i(m)
1195	j = surf_usm_v(l)%j(m)
1196	k = surf_usm_v(l)%k(m)
1197	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
1198	indoor_wall_window_temperature = &
1199	surf_usm_v(l)%frac(ind_veg_wall,m) * t_wall_v(l)%t(nzt_wall,m) &
1200	+ surf_usm_v(l)%frac(ind_wat_win,m) * t_window_v(l)%t(nzt_wall,m)
1201	!
1202	!-- Solar thermal gains. If net_sw_in larger than sun-protection
1203	!-- threshold parameter (params_solar_protection), sun protection will
1204	!-- be activated
1205	IF ( net_sw_in <= params_solar_protection ) THEN
1206	solar_protection_off = 1
1207	solar_protection_on = 0
1208	ELSE
1209	solar_protection_off = 0
1210	solar_protection_on = 1
1211	ENDIF
1212	!
1213	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on automatic sun protection
1214	!-- DIN 4108 - 2 chap.8
1215	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
1216	+ window_area_per_facade * net_sw_in * f_c_win * solar_protection_on ) &
1217	* g_value_win * ( 1 - params_f_f ) * params_f_w
1218	!
1219	!-- Calculation of the mass specific thermal load for internal and external heatsources
1220	phi_m = (eff_mass_area / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
1221	!
1222	!-- Calculation mass specific thermal load implied non thermal mass
1223	phi_st = ( 1 - ( eff_mass_area / total_area ) - ( h_tr_w / ( 9.1 * total_area ) ) ) &
1224	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with phi_ia=0,5*phi_int
1225	!
1226	!-- Calculations for deriving indoor temperature and heat flux into the wall
1227	!-- Step 1: Indoor temperature without heating and cooling
1228	!-- section C.4.1 Picture C.2 zone 3)
1229	phi_hc_nd = 0
1230
1231	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1232	near_facade_temperature, phi_hc_nd )
1233	!
1234	!-- If air temperature between border temperatures of heating and cooling, assign output variable, then ready
1235	IF ( theta_int_h_set <= theta_air .AND. theta_air <= theta_int_c_set ) THEN
1236	phi_hc_nd_ac = 0
1237	phi_hc_nd = phi_hc_nd_ac
1238	theta_air_ac = theta_air
1239	!
1240	!-- Step 2: Else, apply 10 W/mÂ² heating/cooling power and calculate indoor temperature
1241	!-- again.
1242	ELSE
1243	!
1244	!-- Temperature not correct, calculation method according to section C4.2
1245	theta_air_0 = theta_air !< Note temperature without heating/cooling
1246
1247	!-- Heating or cooling?
1248	IF ( theta_air > theta_int_c_set ) THEN
1249	theta_air_set = theta_int_c_set
1250	ELSE
1251	theta_air_set = theta_int_h_set
1252	ENDIF
1253
1254	!-- Calculate the temperature with phi_hc_nd_10
1255	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
1256	phi_hc_nd = phi_hc_nd_10
1257
1258	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1259	near_facade_temperature, phi_hc_nd )
1260
1261	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
1262
1263
1264	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
1265	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
1266	!
1267	!-- Step 3: With temperature ratio to determine the heating or cooling capacity
1268	!-- If necessary, limit the power to maximum power
1269	!-- section C.4.1 Picture C.2 zone 2) and 4)
1270	IF ( phi_c_max < phi_hc_nd_un .AND. phi_hc_nd_un < phi_h_max ) THEN
1271	phi_hc_nd_ac = phi_hc_nd_un
1272	phi_hc_nd = phi_hc_nd_un
1273	ELSE
1274	!-- Step 4: Inner temperature with maximum heating (phi_hc_nd_un positive) or cooling (phi_hc_nd_un negative)
1275	!-- section C.4.1 Picture C.2 zone 1) and 5)
1276	IF ( phi_hc_nd_un > 0 ) THEN
1277	phi_hc_nd_ac = phi_h_max !< Limit heating
1278	ELSE
1279	phi_hc_nd_ac = phi_c_max !< Limit cooling
1280	ENDIF
1281	ENDIF
1282
1283	phi_hc_nd = phi_hc_nd_ac
1284	!
1285	!-- Calculate the temperature with phi_hc_nd_ac (new)
1286	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1287	near_facade_temperature, phi_hc_nd )
1288
1289	theta_air_ac = theta_air
1290
1291	ENDIF
1292	!
1293	!-- Update theta_m_t_prev
1294	theta_m_t_prev = theta_m_t
1295	!
1296	!-- Calculate the operating temperature with weighted mean of temperature of air and mean
1297	!-- Will be used for thermal comfort calculations
1298	theta_op = 0.3 * theta_air_ac + 0.7 * theta_s
1299	!
1300	!-- Heat flux into the wall. Value needed in urban_surface_mod to
1301	!-- calculate heat transfer through wall layers towards the facade
1302	q_wall_win = h_tr_ms * ( theta_s - theta_m ) &
1303	/ ( facade_element_area &
1304	- window_area_per_facade )
1305	!
1306	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
1307	surf_usm_v(l)%iwghf_eb(m) = q_wall_win
1308	surf_usm_v(l)%iwghf_eb_window(m) = q_wall_win
1309	!
1310	!-- Sum up operational indoor temperature per kk-level. Further below,
1311	!-- this temperature is reduced by MPI to one temperature per kk-level
1312	!-- and building (processor overlapping)
1313	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
1314
1315	!
1316	!-- Calculation of waste heat
1317	!-- Anthropogenic heat output
1318	IF ( phi_hc_nd_ac > 0 ) THEN
1319	heating_on = 1
1320	cooling_on = 0
1321	ELSE
1322	heating_on = 0
1323	cooling_on = 1
1324	ENDIF
1325
1326	q_waste_heat = (phi_hc_nd * (params_waste_heat_h * heating_on + params_waste_heat_c * cooling_on)) !< [W/m2] , anthropogenic heat output
1327	! surf_usm_v(l)%waste_heat(m)=q_waste_heat
1328
1329	ENDDO !< Vertical surfaces loop
1330
1331	ENDIF !< buildings(nb)%on_pe
1332	ENDDO !< buildings loop
1333
1334	!
1335	!-- Determine total number of facade elements per building and assign number to
1336	!-- building data type.
1337	DO nb = 1, num_build
1338	!
1339	!-- Allocate dummy array used for summing-up facade elements.
1340	!-- Please note, dummy arguments are necessary as building-date type
1341	!-- arrays are not necessarily allocated on all PEs.
1342	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
1343	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
1344	t_in_l_send = 0.0_wp
1345	t_in_recv = 0.0_wp
1346
1347	IF ( buildings(nb)%on_pe ) THEN
1348	t_in_l_send = buildings(nb)%t_in_l
1349	ENDIF
1350
1351	#if defined( __parallel )
1352	CALL MPI_ALLREDUCE( t_in_l_send, &
1353	t_in_recv, &
1354	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
1355	MPI_REAL, &
1356	MPI_SUM, &
1357	comm2d, &
1358	ierr )
1359
1360	IF ( ALLOCATED( buildings(nb)%t_in ) ) &
1361	buildings(nb)%t_in = t_in_recv
1362	#else
1363	buildings(nb)%t_in = buildings(nb)%t_in_l
1364	#endif
1365
1366	buildings(nb)%t_in = buildings(nb)%t_in / &
1367	( buildings(nb)%num_facade_h + &
1368	buildings(nb)%num_facade_v )
1369	!
1370	!-- Deallocate dummy arrays
1371	DEALLOCATE( t_in_l_send )
1372	DEALLOCATE( t_in_recv )
1373
1374	ENDDO
1375
1376
1377	END SUBROUTINE im_main_heatcool
1378
1379	!------------------------------------------------------------------------------!
1380	! Description:
1381	! ------------
1382	!> Parin for &indoor_parameters for indoor model
1383	!------------------------------------------------------------------------------!
1384	SUBROUTINE im_parin
1385
1386	USE control_parameters, &
1387	ONLY: indoor_model
1388
1389	IMPLICIT NONE
1390
1391	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
1392
1393
1394
1395	NAMELIST /indoor_parameters/ building_type, dt_indoor, &
1396	initial_indoor_temperature
1397
1398	! line = ' '
1399
1400	!
1401	!-- Try to find indoor model package
1402	REWIND ( 11 )
1403	line = ' '
1404	DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 )
1405	READ ( 11, '(A)', END=10 ) line
1406	! PRINT*, 'line: ', line
1407	ENDDO
1408	BACKSPACE ( 11 )
1409
1410	!
1411	!-- Read user-defined namelist
1412	READ ( 11, indoor_parameters )
1413	!
1414	!-- Set flag that indicates that the indoor model is switched on
1415	indoor_model = .TRUE.
1416
1417	!
1418	!-- Activate spinup (maybe later
1419	! IF ( spinup_time > 0.0_wp ) THEN
1420	! coupling_start_time = spinup_time
1421	! end_time = end_time + spinup_time
1422	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
1423	! spinup_pt_mean = pt_surface
1424	! ENDIF
1425	! spinup = .TRUE.
1426	! ENDIF
1427
1428	10 CONTINUE
1429
1430	END SUBROUTINE im_parin
1431
1432
1433	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |