Home

Context Navigation

indoor_model_mod.f90 @ 4851

Last change on this file since 4851 was 4850, checked in by suehring, 4 years ago
Bugfix in indoor model: consider previous indoor temperature during restarts; Further bugfix in mpi-io restart mechanism for the waste-heat flux from buildings
Property svn:keywords set to `Id`
File size: 113.9 KB

Line
1	!> @file indoor_model_mod.f90
2	!--------------------------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
7	! (at your option) any later version.
8	!
9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
11	! Public License for more details.
12	!
13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
14	! <http://www.gnu.org/licenses/>.
15	!
16	! Copyright 2018-2021 Leibniz Universitaet Hannover
17	! Copyright 2018-2021 Hochschule Offenburg
18	!--------------------------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: indoor_model_mod.f90 4850 2021-01-21 17:59:25Z gronemeier $
27	! Enable restart mechanism for previous indoor temperature
28	!
29	! 4843 2021-01-15 15:22:11Z raasch
30	! local namelist parameter added to switch off the module although the respective module namelist
31	! appears in the namelist file
32	!
33	! 4842 2021-01-14 10:42:28Z raasch
34	! reading of namelist file and actions in case of namelist errors revised so that statement labels
35	! and goto statements are not required any more
36	!
37	! 4828 2021-01-05 11:21:41Z Giersch
38	! Change parameters for summer_pars and winter_pars (responsible: S. Rissmann)
39	!
40	! 4780 2020-11-10 11:17:10Z suehring
41	! Enable 3D data output also with 64-bit precision
42	!
43	! 4750 2020-10-16 14:27:48Z suehring
44	! - Namelist parameter added to switch-off/on the indoor model during wall/soil spinup
45	! - Bugfix in window-wall treatment during spinup - in the urban-surface model the window fraction
46	! is set to zero during spinup, so it is done here also
47	! - Bugfix in wall treatment - inner wall temperature was too low due to wrong weighting of
48	! wall/green/window fractions
49	!
50	! 4730 2020-10-07 10:48:51Z suehring
51	! Bugfix - avoid divisions by zero
52	!
53	! 4709 2020-09-28 19:20:00Z maronga
54	! Bugfix: avoid division by zero in case of zero window fraction (now also for vertical walls).
55	! Reactivated waste heat.
56	!
57	! 4704 2020-09-28 10:13:03Z maronga
58	! Bugfix: avoid division by zero in case of zero window fraction
59	!
60	! 4702 2020-09-27 18:39:00Z maronga
61	! Removed unused variable indoor_wall_window_temperature
62	!
63	! 4701 2020-09-27 11:02:15Z maronga
64	! Heat transfer for wall and windows back to USM separated into q_wall and q_win (instead q_wall_win).
65	! Heat flow direction revised (heat flow positive from outside to inside).
66	! New variable indoor_wall_temperature (for q_wall).
67	! Removed unused quantity q_trans.
68	!
69	! 4698 2020-09-25 08:37:55Z maronga
70	! Fixed faulty characters
71	!
72	! 4687 2020-09-21 19:40:16Z maronga
73	! Bugfix: values of theta_m_t_prev were not stored for individual surfaces and thus re-used by all
74	! surfaces and buildings, which led to excessive indoor temperatures
75	!
76	! 4681 2020-09-16 10:23:06Z pavelkrc
77	! Bugfix for implementation of downward surfaces
78	!
79	! 4671 2020-09-09 20:27:58Z pavelkrc
80	! Implementation of downward facing USM and LSM surfaces
81	!
82	! 4646 2020-08-24 16:02:40Z raasch
83	! file re-formatted to follow the PALM coding standard
84	!
85	! 4481 2020-03-31 18:55:54Z maronga
86	! Change order of dimension in surface array %frac to allow for better vectorization.
87	!
88	! 4441 2020-03-04 19:20:35Z suehring
89	! Major bugfix in calculation of energy demand - floor-area-per-facade was wrongly calculated
90	! leading to unrealistically high energy demands and thus to unreallistically high waste-heat
91	! fluxes.
92	!
93	! 4346 2019-12-18 11:55:56Z motisi
94	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
95	! information used in wall_flags_static_0
96	!
97	! 4329 2019-12-10 15:46:36Z motisi
98	! Renamed wall_flags_0 to wall_flags_static_0
99	!
100	! 4310 2019-11-26 19:01:28Z suehring
101	! Remove dt_indoor from namelist input. The indoor model is an hourly-based model, calling it
102	! more/less often lead to inaccurate results.
103	!
104	! 4299 2019-11-22 10:13:38Z suehring
105	! Output of indoor temperature revised (to avoid non-defined values within buildings)
106	!
107	! 4267 2019-10-16 18:58:49Z suehring
108	! Bugfix in initialization, some indices to access building_pars where wrong.
109	! Introduction of seasonal parameters.
110	!
111	! 4246 2019-09-30 09:27:52Z pavelkrc
112	!
113	!
114	! 4242 2019-09-27 12:59:10Z suehring
115	! Bugfix in array index
116	!
117	! 4238 2019-09-25 16:06:01Z suehring
118	! - Bugfix in determination of minimum facade height and in location message
119	! - Bugfix, avoid division by zero
120	! - Some optimization
121	!
122	! 4227 2019-09-10 18:04:34Z gronemeier
123	! implement new palm_date_time_mod
124	!
125	! 4217 2019-09-04 09:47:05Z scharf
126	! Corrected "Former revisions" section
127	!
128	! 4209 2019-09-02 12:00:03Z suehring
129	! - Bugfix in initialization of indoor temperature
130	! - Prescibe default indoor temperature in case it is not given in the namelist input
131	!
132	! 4182 2019-08-21 14:37:54Z scharf
133	! Corrected "Former revisions" section
134	!
135	! 4148 2019-08-08 11:26:00Z suehring
136	! Bugfix in case of non grid-resolved buildings. Further, vertical grid spacing is now considered at
137	! the correct level.
138	! - change calculation of a_m and c_m
139	! - change calculation of u-values (use h_es in building array)
140	! - rename h_tr_... to h_t_...
141	! h_tr_em to h_t_wm
142	! h_tr_op to h_t_wall
143	! h_tr_w to h_t_es
144	! - rename h_ve to h_v
145	! - rename h_is to h_ms
146	! - inserted net_floor_area
147	! - inserted params_waste_heat_h, params_waste_heat_c from building database
148	! in building array
149	! - change calculation of q_waste_heat
150	! - bugfix in averaging mean indoor temperature
151	!
152	! 3759 2019-02-21 15:53:45Z suehring
153	! - Calculation of total building volume
154	! - Several bugfixes
155	! - Calculation of building height revised
156	!
157	! 3745 2019-02-15 18:57:56Z suehring
158	! - remove building_type from module
159	! - initialize parameters for each building individually instead of a bulk initializaion with
160	! identical building type for all
161	! - output revised
162	! - add missing _wp
163	! - some restructuring of variables in building data structure
164	!
165	! 3744 2019-02-15 18:38:58Z suehring
166	! Some interface calls moved to module_interface + cleanup
167	!
168	! 3469 2018-10-30 20:05:07Z kanani
169	! Initial revision (tlang, suehring, kanani, srissman)!
170	!
171	! Authors:
172	! --------
173	! @author Tobias Lang
174	! @author Jens Pfafferott
175	! @author Farah Kanani-Suehring
176	! @author Matthias Suehring
177	! @author Sascha Rissmann
178	! @author Bjoern Maronga
179	!
180	!
181	! Description:
182	! ------------
183	!> Module for Indoor Climate Model (ICM)
184	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
185	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
186	!> This module differs between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine
187	!> thermal comfort
188	!> the heat transfer between indoor and outdoor is simplified
189
190	!> @todo Many statement comments that are given as doxygen comments need to be changed to normal comments
191	!> @todo Replace window_area_per_facade by %frac(1,m) for window
192	!> @todo emissivity change for window blinds if solar_protection_on=1
193
194	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
195	!> @note How to write indoor temperature output to pt array?
196	!>
197	!> @bug Calculation of iwghf_eb and iwghf_eb_window is faulty
198	!--------------------------------------------------------------------------------------------------!
199	MODULE indoor_model_mod
200
201	USE arrays_3d, &
202	ONLY: ddzw, &
203	dzw, &
204	pt
205
206	USE control_parameters, &
207	ONLY: initializing_actions
208
209	USE kinds
210
211	USE netcdf_data_input_mod, &
212	ONLY: building_id_f, building_type_f
213
214	USE palm_date_time_mod, &
215	ONLY: get_date_time, northward_equinox, seconds_per_hour, southward_equinox
216
217	USE surface_mod, &
218	ONLY: surf_usm_h, surf_usm_v
219
220
221	IMPLICIT NONE
222
223	!
224	!-- Define data structure for buidlings.
225	TYPE build
226
227	INTEGER(iwp) :: id !< building ID
228	INTEGER(iwp) :: kb_max !< highest vertical index of a building
229	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
230	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
231	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
232	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
233	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
234	INTEGER(iwp) :: ventilation_int_loads !< [-] allocation of activity in the building
235
236	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_h !< index array linking surface-element orientation index
237	!< for horizontal surfaces with building
238	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
239	!< for vertical surfaces with building
240	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
241	!< horizontal surfaces with building
242	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
243	!< vertical surfaces with building
244	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
245	!< and height level
246	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
247	!< and height level
248
249
250	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
251
252	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
253	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
254	REAL(wp) :: area_facade !< [m2] area of total facade
255	REAL(wp) :: building_height !< building height
256	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
257	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
258	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
259	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
260	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
261	REAL(wp) :: f_c_win !< [-] shading factor
262	REAL(wp) :: fapf !< [m2/m2] floor area per facade
263	REAL(wp) :: g_value_win !< [-] SHGC factor
264	REAL(wp) :: h_es !< [W/(m2 K)] surface-related heat transfer coefficient between extern and surface
265	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
266	REAL(wp) :: height_storey !< [m] storey heigth
267	REAL(wp) :: params_waste_heat_c !< [-] anthropogenic heat outputs for cooling e.g. 1.33 for KKM with COP = 3
268	REAL(wp) :: params_waste_heat_h !< [-] anthropogenic heat outputs for heating e.g. 1 - 0.9 = 0.1 for combustion with
269	!< eta = 0.9 or -2 for WP with COP = 3
270	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
271	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (positive)
272	REAL(wp) :: q_c_max !< [W/m2] Max. Cooling heat flux per netto floor area (negative)
273	REAL(wp) :: q_h_max !< [W/m2] Max. Heating heat flux per netto floor area (positive)
274	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
275	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
276	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
277	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
278	REAL(wp) :: net_floor_area !< [m2] netto ground area
279	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
280	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
281	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
282	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
283	REAL(wp) :: vol_tot !< [m3] total building volume
284
285	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
286	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
287	REAL(wp), DIMENSION(:), ALLOCATABLE :: theta_m_t_prev_h !< [degree_C] value of theta_m_t from previous time step (horizontal)
288	REAL(wp), DIMENSION(:), ALLOCATABLE :: theta_m_t_prev_v !< [degree_C] value of theta_m_t from previous time step (vertical)
289	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
290	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
291	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
292
293	END TYPE build
294
295	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
296
297	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
298	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
299	INTEGER(iwp) :: num_build !< total number of buildings in domain
300	INTEGER(iwp) :: solar_protection_off !< Solar protection off
301	INTEGER(iwp) :: solar_protection_on !< Solar protection on
302
303	LOGICAL :: indoor_during_spinup = .FALSE. !< namelist parameter used to switch-off/on the indoor model during spinup
304	!
305	!-- Declare all global variables within the module
306
307	REAL(wp), PARAMETER :: dt_indoor = 3600.0_wp !< [s] time interval for indoor-model application, fixed to
308	!< 3600.0 due to model requirements
309	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
310	!< surface and air (chap. 7.2.2.2)
311	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
312	!< component and surface (chap. 12.2.2)
313	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly
314	!< cooling 2.0_wp
315	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall
316	!< DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
317	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus
318	!< Datenbank 27 window_area_per_facade_percent
319	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation
320	!< on facade exceeds this value
321
322	REAL(wp) :: a_m !< [m2] the effective mass-related area
323	REAL(wp) :: air_change !< [1/h] Airflow
324	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
325	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
326	REAL(wp) :: floor_area_per_facade !< [m2/m2] floor area per facade area
327	REAL(wp) :: h_t_1 !< [W/K] Heat transfer coefficient auxiliary variable 1
328	REAL(wp) :: h_t_2 !< [W/K] Heat transfer coefficient auxiliary variable 2
329	REAL(wp) :: h_t_3 !< [W/K] Heat transfer coefficient auxiliary variable 3
330	REAL(wp) :: h_t_es !< [W/K] heat transfer coefficient of doors, windows, curtain walls and
331	!< glazed walls (assumption: thermal mass=0)
332	REAL(wp) :: h_t_is !< [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
333	REAL(wp) :: h_t_ms !< [W/K] Heat transfer conductance term (got with h_t_wm the thermal mass)
334	REAL(wp) :: h_t_wall !< [W/K] heat transfer coefficient of opaque components (assumption: got all
335	!< thermal mass) contains of h_t_wm and h_t_ms
336	REAL(wp) :: h_t_wm !< [W/K] Heat transfer coefficient of the emmision (got with h_t_ms the
337	!< thermal mass)
338	REAL(wp) :: h_v !< [W/K] heat transfer of ventilation
339	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
340	REAL(wp) :: initial_indoor_temperature = 293.15 !< [K] initial indoor temperature (namelist parameter)
341	REAL(wp) :: net_sw_in !< [W/m2] net short-wave radiation
342	REAL(wp) :: phi_hc_nd !< [W] heating demand and/or cooling demand
343	REAL(wp) :: phi_hc_nd_10 !< [W] heating demand and/or cooling demand for heating or cooling
344	REAL(wp) :: phi_hc_nd_ac !< [W] actual heating demand and/or cooling demand
345	REAL(wp) :: phi_hc_nd_un !< [W] unlimited heating demand and/or cooling demand which is necessary to
346	!< reach the demanded required temperature (heating is positive,
347	!< cooling is negative)
348	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
349	REAL(wp) :: phi_m !< [W] mass specific thermal load (internal and external)
350	REAL(wp) :: phi_mtot !< [W] total mass specific thermal load (internal and external)
351	REAL(wp) :: phi_sol !< [W] solar loads
352	REAL(wp) :: phi_st !< [W] mass specific thermal load implied non thermal mass
353	REAL(wp) :: q_wall !< [W/m2]heat flux from indoor into wall
354	REAL(wp) :: q_win !< [W/m2]heat flux from indoor into window
355	REAL(wp) :: q_waste_heat !< [W/m2]waste heat, sum of waste heat over the roof to Palm
356
357	REAL(wp) :: q_c_m !< [W] Energy of thermal storage mass specific thermal load for internal
358	!< and external heatsources (for energy bilanz)
359	REAL(wp) :: q_c_st !< [W] Energy of thermal storage mass specific thermal load implied non
360	!< thermal mass (for energy bilanz)
361	REAL(wp) :: q_int !< [W] Energy of internal air load (for energy bilanz)
362	REAL(wp) :: q_sol !< [W] Energy of solar (for energy bilanz)
363	REAL(wp) :: q_vent !< [W] Energy of ventilation (for energy bilanz)
364
365	REAL(wp) :: schedule_d !< [-] activation for internal loads (low or high + low)
366	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
367	REAL(wp) :: theta_air !< [degree_C] air temperature of the RC-node
368	REAL(wp) :: theta_air_0 !< [degree_C] air temperature of the RC-node in equilibrium
369	REAL(wp) :: theta_air_10 !< [degree_C] air temperature of the RC-node from a heating capacity
370	!< of 10 W/m2
371	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
372	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
373	REAL(wp) :: theta_m !< [degree_C} inner temperature of the RC-node
374	REAL(wp) :: theta_m_t !< [degree_C] (Fictive) component temperature during timestep
375	REAL(wp) :: theta_op !< [degree_C] operative temperature
376	REAL(wp) :: theta_s !< [degree_C] surface temperature of the RC-node
377	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
378	REAL(wp) :: total_area !< [m2] area of all surfaces pointing to zone
379	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
380
381	!
382	!-- Definition of seasonal parameters, summer and winter, for different building types
383	REAL(wp), DIMENSION(0:1,1:7) :: summer_pars = RESHAPE( (/ & ! building_type 1
384	0.5_wp, & ! basical airflow without occupancy of the room
385	1.5_wp, & ! additional airflow depend of occupancy of the room
386	0.5_wp, & ! building_type 2: basical airflow without occupancy
387	! of the room
388	1.5_wp, & ! additional airflow depend of occupancy of the room
389	0.5_wp, & ! building_type 3: basical airflow without occupancy
390	! of the room
391	1.5_wp, & ! additional airflow depend of occupancy of the room
392	1.0_wp, & ! building_type 4: basical airflow without occupancy
393	! of the room
394	1.0_wp, & ! additional airflow depend of occupancy of the room
395	1.0_wp, & ! building_type 5: basical airflow without occupancy
396	! of the room
397	1.0_wp, & ! additional airflow depend of occupancy of the room
398	1.0_wp, & ! building_type 6: basical airflow without occupancy
399	! of the room
400	1.0_wp, & ! additional airflow depend of occupancy of the room
401	1.0_wp, & ! building_type 7: basical airflow without occupancy
402	! of the room
403	1.0_wp & ! additional airflow depend of occupancy of the room
404	/), (/ 2, 7 /) )
405
406	REAL(wp), DIMENSION(0:1,1:7) :: winter_pars = RESHAPE( (/ & ! building_type 1
407	0.5_wp, & ! basical airflow without occupancy of the room
408	0.0_wp, & ! additional airflow depend of occupancy of the room
409	0.5_wp, & ! building_type 2: basical airflow without occupancy
410	! of the room
411	0.0_wp, & ! additional airflow depend of occupancy of the room
412	0.5_wp, & ! building_type 3: basical airflow without occupancy
413	! of the room
414	0.0_wp, & ! additional airflow depend of occupancy of the room
415	0.2_wp, & ! building_type 4: basical airflow without occupancy
416	! of the room
417	0.8_wp, & ! additional airflow depend of occupancy of the room
418	0.2_wp, & ! building_type 5: basical airflow without occupancy
419	! of the room
420	0.8_wp, & ! additional airflow depend of occupancy of the room
421	0.2_wp, & ! building_type 6: basical airflow without occupancy
422	! of the room
423	0.8_wp, & ! additional airflow depend of occupancy of the room
424	0.2_wp, & ! building_type 7: basical airflow without occupancy
425	! of the room
426	0.8_wp & ! additional airflow depend of occupancy of the room
427	/), (/ 2, 7 /) )
428
429	SAVE
430
431
432	PRIVATE
433
434	!
435	!-- Add INTERFACES that must be available to other modules
436	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, im_check_data_output, &
437	im_data_output_3d, im_check_parameters
438
439
440	!
441	!-- Add VARIABLES that must be available to other modules
442	PUBLIC dt_indoor, &
443	indoor_during_spinup, &
444	skip_time_do_indoor, &
445	time_indoor
446
447	!
448	!-- PALM interfaces:
449	!-- Data output checks for 2D/3D data to be done in check_parameters
450	INTERFACE im_check_data_output
451	MODULE PROCEDURE im_check_data_output
452	END INTERFACE im_check_data_output
453	!
454	!-- Input parameter checks to be done in check_parameters
455	INTERFACE im_check_parameters
456	MODULE PROCEDURE im_check_parameters
457	END INTERFACE im_check_parameters
458	!
459	!-- Data output of 3D data
460	INTERFACE im_data_output_3d
461	MODULE PROCEDURE im_data_output_3d
462	END INTERFACE im_data_output_3d
463
464	!
465	!-- Definition of data output quantities
466	INTERFACE im_define_netcdf_grid
467	MODULE PROCEDURE im_define_netcdf_grid
468	END INTERFACE im_define_netcdf_grid
469	!
470	! !
471	! !-- Output of information to the header file
472	! INTERFACE im_header
473	! MODULE PROCEDURE im_header
474	! END INTERFACE im_header
475	!
476	!-- Calculations for indoor temperatures
477	INTERFACE im_calc_temperatures
478	MODULE PROCEDURE im_calc_temperatures
479	END INTERFACE im_calc_temperatures
480	!
481	!-- Initialization actions
482	INTERFACE im_init
483	MODULE PROCEDURE im_init
484	END INTERFACE im_init
485	!
486	!-- Main part of indoor model
487	INTERFACE im_main_heatcool
488	MODULE PROCEDURE im_main_heatcool
489	END INTERFACE im_main_heatcool
490	!
491	!-- Reading of NAMELIST parameters
492	INTERFACE im_parin
493	MODULE PROCEDURE im_parin
494	END INTERFACE im_parin
495
496	CONTAINS
497
498	!--------------------------------------------------------------------------------------------------!
499	! Description:
500	! ------------
501	!< Calculation of the air temperatures and mean radiation temperature.
502	!< This is basis for the operative temperature.
503	!< Based on a Crank-Nicholson scheme with a timestep of a hour.
504	!--------------------------------------------------------------------------------------------------!
505	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
506	near_facade_temperature, phi_hc_nd_dummy, theta_m_t_prev )
507
508	INTEGER(iwp) :: i
509	INTEGER(iwp) :: j
510	INTEGER(iwp) :: k
511
512	REAL(wp) :: indoor_wall_temperature !< temperature of innermost wall layer evtl in im_calc_temperatures einfÃŒgen
513	REAL(wp) :: near_facade_temperature
514	REAL(wp) :: phi_hc_nd_dummy
515	REAL(wp), INTENT(IN) :: theta_m_t_prev
516	!
517	!-- Calculation of total mass specific thermal load (internal and external)
518	phi_mtot = ( phi_m + h_t_wm * indoor_wall_temperature &
519	+ h_t_3 * ( phi_st + h_t_es * pt(k,j,i) &
520	+ h_t_1 * &
521	( ( ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
522	+ near_facade_temperature ) &
523	) / h_t_2 &
524	) !< [degree_C] Eq. (C.5)
525	!
526	!-- Calculation of component temperature at current timestep
527	theta_m_t = ( ( theta_m_t_prev &
528	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_t_3 + h_t_wm ) ) &
529	+ phi_mtot &
530	) &
531	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_t_3 + h_t_wm ) ) &
532	) !< [degree_C] Eq. (C.4)
533	!
534	!-- Calculation of mean inner temperature for the RC-node in current timestep
535	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
536
537	!
538	!-- Calculation of mean surface temperature of the RC-node in current timestep
539	theta_s = ( ( h_t_ms * theta_m + phi_st + h_t_es * pt(k,j,i) &
540	+ h_t_1 * ( near_facade_temperature &
541	+ ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
542	) &
543	/ ( h_t_ms + h_t_es + h_t_1 ) &
544	) !< [degree_C] Eq. (C.10)
545
546	!
547	!-- Calculation of the air temperature of the RC-node
548
549
550	theta_air = ( h_t_is * theta_s + h_v * near_facade_temperature + phi_ia + phi_hc_nd_dummy ) / &
551	( h_t_is + h_v ) !< [degree_C] Eq. (C.11)
552
553
554	END SUBROUTINE im_calc_temperatures
555
556
557	!--------------------------------------------------------------------------------------------------!
558	! Description:
559	! ------------
560	!> Initialization of the indoor model.
561	!> Static information are calculated here, e.g. building parameters and geometrical information,
562	!> anything that doesn't change in time.
563	!
564	!-- Input values
565	!-- Input datas from Palm, M4
566	! i_global --> net_sw_in !< global radiation [W/m2]
567	! theta_e --> pt(k,j,i) !< undisturbed outside temperature, 1. PALM volume, for windows
568	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
569	! surf_usm_v(l)%pt_10cm(m) !< Air temperature, facade near (10cm) air temperature from
570	!< 1. Palm volume
571	! theta_node --> t_wall_h(nzt_wall,m)
572	! t_wall_v(l)%t(nzt_wall,m) !< Temperature of innermost wall layer, for opaque wall
573	!--------------------------------------------------------------------------------------------------!
574	SUBROUTINE im_init
575
576	USE control_parameters, &
577	ONLY: message_string, time_since_reference_point
578
579	USE indices, &
580	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_total_0
581
582	USE grid_variables, &
583	ONLY: dx, dy
584
585	USE pegrid
586
587	USE surface_mod, &
588	ONLY: surf_usm_h, surf_usm_v
589
590	USE urban_surface_mod, &
591	ONLY: building_pars, building_type
592
593	INTEGER(iwp) :: bt !< local building type
594	INTEGER(iwp) :: day_of_year !< day of the year
595	INTEGER(iwp) :: fa !< running index for facade elements of each building
596	INTEGER(iwp) :: i !< running index along x-direction
597	INTEGER(iwp) :: j !< running index along y-direction
598	INTEGER(iwp) :: k !< running index along z-direction
599	INTEGER(iwp) :: l !< running index for surface-element orientation
600	INTEGER(iwp) :: m !< running index surface elements
601	INTEGER(iwp) :: n !< building index
602	INTEGER(iwp) :: nb !< building index
603
604	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
605	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
606	!< multiple occurences are sorted out
607	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
608	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
609	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
610	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
611	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
612	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
613	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
614	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
615	!< horizontal facade elements
616	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
617	!< vertical facade elements
618	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
619	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
620
621	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
622	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
623
624	REAL(wp) :: u_tmp !< dummy for temporary calculation of u-value without h_is
625	REAL(wp) :: du_tmp !< 1/u_tmp
626	REAL(wp) :: du_win_tmp !< 1/building(nb)%u_value_win
627	REAL(wp) :: facade_area_v !< dummy to compute the total facade area from vertical walls
628
629	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
630	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
631	!< on local subdomain
632
633	CALL location_message( 'initializing indoor model', 'start' )
634	!
635	!-- Initializing of indoor model is only possible if buildings can be distinguished by their IDs.
636	IF ( .NOT. building_id_f%from_file ) THEN
637	message_string = 'Indoor model requires information about building_id'
638	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
639	ENDIF
640	!
641	!-- Determine number of different building IDs on local subdomain.
642	num_buildings_l = 0
643	num_buildings = 0
644	ALLOCATE( build_ids_l(1) )
645	DO i = nxl, nxr
646	DO j = nys, nyn
647	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
648	IF ( num_buildings_l(myid) > 0 ) THEN
649	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
650	CYCLE
651	ELSE
652	num_buildings_l(myid) = num_buildings_l(myid) + 1
653	!
654	!-- Resize array with different local building ids
655	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
656	build_ids_l_tmp = build_ids_l
657	DEALLOCATE( build_ids_l )
658	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
659	build_ids_l(1:num_buildings_l(myid)-1) = &
660	build_ids_l_tmp(1:num_buildings_l(myid)-1)
661	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
662	DEALLOCATE( build_ids_l_tmp )
663	ENDIF
664	!
665	!-- First occuring building id on PE
666	ELSE
667	num_buildings_l(myid) = num_buildings_l(myid) + 1
668	build_ids_l(1) = building_id_f%var(j,i)
669	ENDIF
670	ENDIF
671	ENDDO
672	ENDDO
673	!
674	!-- Determine number of building IDs for the entire domain. (Note, building IDs can appear multiple
675	!-- times as buildings might be distributed over several PEs.)
676	#if defined( __parallel )
677	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, comm2d, &
678	ierr )
679	#else
680	num_buildings = num_buildings_l
681	#endif
682	ALLOCATE( build_ids(1:SUM(num_buildings)) )
683	!
684	!-- Gather building IDs. Therefore, first, determine displacements used required for MPI_GATHERV
685	!-- call.
686	ALLOCATE( displace_dum(0:numprocs-1) )
687	displace_dum(0) = 0
688	DO i = 1, numprocs-1
689	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
690	ENDDO
691
692	#if defined( __parallel )
693	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
694	num_buildings(myid), &
695	MPI_INTEGER, &
696	build_ids, &
697	num_buildings, &
698	displace_dum, &
699	MPI_INTEGER, &
700	comm2d, ierr )
701
702	DEALLOCATE( displace_dum )
703
704	#else
705	build_ids = build_ids_l
706	#endif
707	!
708	!-- Note: in parallel mode, building IDs can occur mutliple times, as each PE has send its own ids.
709	!-- Therefore, sort out building IDs which appear multiple times.
710	num_build = 0
711	DO n = 1, SIZE(build_ids)
712
713	IF ( ALLOCATED(build_ids_final) ) THEN
714	IF ( ANY( build_ids(n) == build_ids_final ) ) THEN
715	CYCLE
716	ELSE
717	num_build = num_build + 1
718	!
719	!-- Resize
720	ALLOCATE( build_ids_final_tmp(1:num_build) )
721	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
722	DEALLOCATE( build_ids_final )
723	ALLOCATE( build_ids_final(1:num_build) )
724	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
725	build_ids_final(num_build) = build_ids(n)
726	DEALLOCATE( build_ids_final_tmp )
727	ENDIF
728	ELSE
729	num_build = num_build + 1
730	ALLOCATE( build_ids_final(1:num_build) )
731	build_ids_final(num_build) = build_ids(n)
732	ENDIF
733	ENDDO
734
735	!
736	!-- Allocate building-data structure array. Note, this is a global array and all building IDs on
737	!-- domain are known by each PE. Further attributes, e.g. height-dependent arrays, however, are only
738	!-- allocated on PEs where the respective building is present (in order to reduce memory demands).
739	ALLOCATE( buildings(1:num_build) )
740
741	!
742	!-- Store building IDs and check if building with certain ID is present on subdomain.
743	DO nb = 1, num_build
744	buildings(nb)%id = build_ids_final(nb)
745
746	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
747	buildings(nb)%on_pe = .TRUE.
748	ENDDO
749	!
750	!-- Determine the maximum vertical dimension occupied by each building.
751	ALLOCATE( k_min_l(1:num_build) )
752	ALLOCATE( k_max_l(1:num_build) )
753	k_min_l = nzt + 1
754	k_max_l = 0
755
756	DO i = nxl, nxr
757	DO j = nys, nyn
758	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
759	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
760	DO k = nzb, nzt+1
761	!
762	!-- Check if grid point belongs to a building.
763	IF ( BTEST( wall_flags_total_0(k,j,i), 6 ) ) THEN
764	k_min_l(nb) = MIN( k_min_l(nb), k )
765	k_max_l(nb) = MAX( k_max_l(nb), k )
766	ENDIF
767
768	ENDDO
769	ENDIF
770	ENDDO
771	ENDDO
772
773	#if defined( __parallel )
774	CALL MPI_ALLREDUCE( k_min_l(:), buildings(:)%kb_min, num_build, MPI_INTEGER, MPI_MIN, comm2d, &
775	ierr )
776	CALL MPI_ALLREDUCE( k_max_l(:), buildings(:)%kb_max, num_build, MPI_INTEGER, MPI_MAX, comm2d, &
777	ierr )
778	#else
779	buildings(:)%kb_min = k_min_l(:)
780	buildings(:)%kb_max = k_max_l(:)
781	#endif
782
783	DEALLOCATE( k_min_l )
784	DEALLOCATE( k_max_l )
785	!
786	!-- Calculate building height.
787	DO nb = 1, num_build
788	buildings(nb)%building_height = 0.0_wp
789	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
790	buildings(nb)%building_height = buildings(nb)%building_height + dzw(k+1)
791	ENDDO
792	ENDDO
793	!
794	!-- Calculate building volume
795	DO nb = 1, num_build
796	!
797	!-- Allocate temporary array for summing-up building volume
798	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
799	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
800	volume = 0.0_wp
801	volume_l = 0.0_wp
802	!
803	!-- Calculate building volume per height level on each PE where these building is present.
804	IF ( buildings(nb)%on_pe ) THEN
805
806	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
807	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
808	buildings(nb)%volume = 0.0_wp
809	buildings(nb)%vol_frac = 0.0_wp
810
811	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) THEN
812	DO i = nxl, nxr
813	DO j = nys, nyn
814	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
815	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
816	volume_l(k) = volume_l(k) + dx * dy * dzw(k+1)
817	ENDDO
818	ENDDO
819	ENDDO
820	ENDIF
821	ENDIF
822	!
823	!-- Sum-up building volume from all subdomains
824	#if defined( __parallel )
825	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, comm2d, ierr )
826	#else
827	volume = volume_l
828	#endif
829	!
830	!-- Save total building volume as well as local fraction on volume on building data structure.
831	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
832	!
833	!-- Determine fraction of local on total building volume
834	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
835	!
836	!-- Calculate total building volume
837	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
838
839	DEALLOCATE( volume )
840	DEALLOCATE( volume_l )
841
842	ENDDO
843	!
844	!-- Allocate arrays for indoor temperature.
845	DO nb = 1, num_build
846	IF ( buildings(nb)%on_pe ) THEN
847	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
848	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
849	buildings(nb)%t_in = 0.0_wp
850	buildings(nb)%t_in_l = 0.0_wp
851	ENDIF
852	ENDDO
853	!
854	!-- Allocate arrays for number of facades per height level. Distinguish between horizontal and
855	!-- vertical facades.
856	DO nb = 1, num_build
857	IF ( buildings(nb)%on_pe ) THEN
858	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
859	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
860
861	buildings(nb)%num_facade_h = 0
862	buildings(nb)%num_facade_v = 0
863	ENDIF
864	ENDDO
865	!
866	!-- Determine number of facade elements per building on local subdomain.
867	!-- Distinguish between horizontal and vertical facade elements.
868	!
869	!-- Horizontal facades
870	buildings(:)%num_facades_per_building_h_l = 0
871	DO l = 0, 1
872	DO m = 1, surf_usm_h(l)%ns
873	!
874	!-- For the current facade element determine corresponding building index.
875	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
876	!-- element and building location (for horizontal surface elements the horizontal offsets are
877	!-- zero).
878	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
879	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
880	k = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
881	!
882	!-- Determine building index and check whether building is on PE.
883	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
884
885	IF ( buildings(nb)%on_pe ) THEN
886	!
887	!-- Count number of facade elements at each height level.
888	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
889	!
890	!-- Moreover, sum up number of local facade elements per building.
891	buildings(nb)%num_facades_per_building_h_l = &
892	buildings(nb)%num_facades_per_building_h_l + 1
893	ENDIF
894	ENDDO
895	ENDDO
896	!
897	!-- Vertical facades
898	buildings(:)%num_facades_per_building_v_l = 0
899	DO l = 0, 3
900	DO m = 1, surf_usm_v(l)%ns
901	!
902	!-- For the current facade element determine corresponding building index.
903	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
904	!-- element and building location (for vertical surface elements the vertical offsets are
905	!-- zero).
906	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
907	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
908	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
909
910	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
911	IF ( buildings(nb)%on_pe ) THEN
912	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
913	buildings(nb)%num_facades_per_building_v_l = &
914	buildings(nb)%num_facades_per_building_v_l + 1
915	ENDIF
916	ENDDO
917	ENDDO
918	!
919	!-- Determine total number of facade elements per building and assign number to building data type.
920	DO nb = 1, num_build
921	!
922	!-- Allocate dummy array used for summing-up facade elements.
923	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
924	!-- allocated on all PEs.
925	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
926	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
927	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
928	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
929	num_facades_h = 0
930	num_facades_v = 0
931	receive_dum_h = 0
932	receive_dum_v = 0
933
934	IF ( buildings(nb)%on_pe ) THEN
935	num_facades_h = buildings(nb)%num_facade_h
936	num_facades_v = buildings(nb)%num_facade_v
937	ENDIF
938
939	#if defined( __parallel )
940	CALL MPI_ALLREDUCE( num_facades_h, &
941	receive_dum_h, &
942	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
943	MPI_INTEGER, &
944	MPI_SUM, &
945	comm2d, &
946	ierr )
947
948	CALL MPI_ALLREDUCE( num_facades_v, &
949	receive_dum_v, &
950	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
951	MPI_INTEGER, &
952	MPI_SUM, &
953	comm2d, &
954	ierr )
955	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) buildings(nb)%num_facade_h = receive_dum_h
956	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) buildings(nb)%num_facade_v = receive_dum_v
957	#else
958	buildings(nb)%num_facade_h = num_facades_h
959	buildings(nb)%num_facade_v = num_facades_v
960	#endif
961
962	!
963	!-- Deallocate dummy arrays
964	DEALLOCATE( num_facades_h )
965	DEALLOCATE( num_facades_v )
966	DEALLOCATE( receive_dum_h )
967	DEALLOCATE( receive_dum_v )
968	!
969	!-- Allocate index arrays which link facade elements with surface-data type.
970	!-- Please note, no height levels are considered here (information is stored in surface-data type
971	!-- itself).
972	IF ( buildings(nb)%on_pe ) THEN
973	!
974	!-- Determine number of facade elements per building.
975	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
976	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
977	!
978	!-- Allocate arrays which link the building with the horizontal and vertical urban-type
979	!-- surfaces. Please note, linking arrays are allocated over all facade elements, which is
980	!-- required in case a building is located at the subdomain boundaries, where the building and
981	!-- the corresponding surface elements are located on different subdomains.
982	ALLOCATE( buildings(nb)%l_h(1:buildings(nb)%num_facades_per_building_h_l) )
983	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
984
985	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
986	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
987
988	ALLOCATE( buildings(nb)%theta_m_t_prev_h(1:buildings(nb)%num_facades_per_building_h_l) )
989	ALLOCATE( buildings(nb)%theta_m_t_prev_v(1:buildings(nb)%num_facades_per_building_v_l) )
990	ENDIF
991
992	IF ( buildings(nb)%on_pe ) THEN
993	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
994	buildings(nb)%vpf = 0.0_wp
995
996	facade_area_v = 0.0_wp
997	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
998	facade_area_v = facade_area_v + buildings(nb)%num_facade_v(k) * dzw(k+1) * dx
999	ENDDO
1000	!
1001	!-- Determine volume per total facade area (vpf). For the horizontal facade area
1002	!-- num_facades_per_building_h can be taken, multiplied with dx*dy.
1003	!-- However, due to grid stretching, vertical facade elements must be summed-up vertically.
1004	!-- Please note, if dx /= dy, an error is made!
1005	buildings(nb)%vpf = buildings(nb)%vol_tot / &
1006	( buildings(nb)%num_facades_per_building_h * dx * dy + facade_area_v )
1007	!
1008	!-- Determine floor-area-per-facade.
1009	buildings(nb)%fapf = buildings(nb)%num_facades_per_building_h * dx * dy &
1010	/ ( buildings(nb)%num_facades_per_building_h * dx * dy &
1011	+ facade_area_v )
1012	ENDIF
1013	ENDDO
1014	!
1015	!-- Link facade elements with surface data type.
1016	!-- Allocate array for counting.
1017	ALLOCATE( n_fa(1:num_build) )
1018	n_fa = 1
1019
1020	DO l = 0, 1
1021	DO m = 1, surf_usm_h(l)%ns
1022	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
1023	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
1024
1025	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
1026
1027	IF ( buildings(nb)%on_pe ) THEN
1028	buildings(nb)%l_h(n_fa(nb)) = l
1029	buildings(nb)%m_h(n_fa(nb)) = m
1030	n_fa(nb) = n_fa(nb) + 1
1031	ENDIF
1032	ENDDO
1033	ENDDO
1034
1035	n_fa = 1
1036	DO l = 0, 3
1037	DO m = 1, surf_usm_v(l)%ns
1038	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
1039	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
1040
1041	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
1042
1043	IF ( buildings(nb)%on_pe ) THEN
1044	buildings(nb)%l_v(n_fa(nb)) = l
1045	buildings(nb)%m_v(n_fa(nb)) = m
1046	n_fa(nb) = n_fa(nb) + 1
1047	ENDIF
1048	ENDDO
1049	ENDDO
1050	DEALLOCATE( n_fa )
1051	!
1052	!-- Initialize building parameters, first by mean building type. Note, in this case all buildings
1053	!-- have the same type.
1054	!-- In a second step initialize with building tpyes from static input file, where building types can
1055	!-- be individual for each building.
1056	buildings(:)%lambda_layer3 = building_pars(31,building_type)
1057	buildings(:)%s_layer3 = building_pars(44,building_type)
1058	buildings(:)%f_c_win = building_pars(119,building_type)
1059	buildings(:)%g_value_win = building_pars(120,building_type)
1060	buildings(:)%u_value_win = building_pars(121,building_type)
1061	buildings(:)%eta_ve = building_pars(124,building_type)
1062	buildings(:)%factor_a = building_pars(125,building_type)
1063	buildings(:)%factor_c = building_pars(126,building_type)
1064	buildings(:)%lambda_at = building_pars(127,building_type)
1065	buildings(:)%theta_int_h_set = building_pars(13,building_type)
1066	buildings(:)%theta_int_c_set = building_pars(12,building_type)
1067	buildings(:)%q_h_max = building_pars(128,building_type)
1068	buildings(:)%q_c_max = building_pars(129,building_type)
1069	buildings(:)%qint_high = building_pars(130,building_type)
1070	buildings(:)%qint_low = building_pars(131,building_type)
1071	buildings(:)%height_storey = building_pars(132,building_type)
1072	buildings(:)%height_cei_con = building_pars(133,building_type)
1073	buildings(:)%params_waste_heat_h = building_pars(134,building_type)
1074	buildings(:)%params_waste_heat_c = building_pars(135,building_type)
1075	!
1076	!-- Initialize seasonal dependent parameters, depending on day of the year.
1077	!-- First, calculated day of the year.
1078	CALL get_date_time( time_since_reference_point, day_of_year = day_of_year )
1079	!
1080	!-- Summer is defined in between northward- and southward equinox.
1081	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
1082	buildings(:)%air_change_low = summer_pars(0,building_type)
1083	buildings(:)%air_change_high = summer_pars(1,building_type)
1084	ELSE
1085	buildings(:)%air_change_low = winter_pars(0,building_type)
1086	buildings(:)%air_change_high = winter_pars(1,building_type)
1087	ENDIF
1088	!
1089	!-- Initialize ventilation load. Please note, building types > 7 are actually not allowed (check
1090	!-- already in urban_surface_mod and netcdf_data_input_mod.
1091	!-- However, the building data base may be later extended.
1092	IF ( building_type == 1 .OR. building_type == 2 .OR. &
1093	building_type == 3 .OR. building_type == 10 .OR. &
1094	building_type == 11 .OR. building_type == 12 ) THEN
1095	buildings(:)%ventilation_int_loads = 1
1096	!
1097	!-- Office, building with large windows
1098	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
1099	building_type == 6 .OR. building_type == 7 .OR. &
1100	building_type == 8 .OR. building_type == 9) THEN
1101	buildings(:)%ventilation_int_loads = 2
1102	!
1103	!-- Industry, hospitals
1104	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
1105	building_type == 15 .OR. building_type == 16 .OR. &
1106	building_type == 17 .OR. building_type == 18 ) THEN
1107	buildings(:)%ventilation_int_loads = 3
1108	ENDIF
1109	!
1110	!-- Initialization of building parameters - level 2
1111	IF ( building_type_f%from_file ) THEN
1112	DO i = nxl, nxr
1113	DO j = nys, nyn
1114	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
1115	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
1116	bt = building_type_f%var(j,i)
1117
1118	buildings(nb)%lambda_layer3 = building_pars(31,bt)
1119	buildings(nb)%s_layer3 = building_pars(44,bt)
1120	buildings(nb)%f_c_win = building_pars(119,bt)
1121	buildings(nb)%g_value_win = building_pars(120,bt)
1122	buildings(nb)%u_value_win = building_pars(121,bt)
1123	buildings(nb)%eta_ve = building_pars(124,bt)
1124	buildings(nb)%factor_a = building_pars(125,bt)
1125	buildings(nb)%factor_c = building_pars(126,bt)
1126	buildings(nb)%lambda_at = building_pars(127,bt)
1127	buildings(nb)%theta_int_h_set = building_pars(13,bt)
1128	buildings(nb)%theta_int_c_set = building_pars(12,bt)
1129	buildings(nb)%q_h_max = building_pars(128,bt)
1130	buildings(nb)%q_c_max = building_pars(129,bt)
1131	buildings(nb)%qint_high = building_pars(130,bt)
1132	buildings(nb)%qint_low = building_pars(131,bt)
1133	buildings(nb)%height_storey = building_pars(132,bt)
1134	buildings(nb)%height_cei_con = building_pars(133,bt)
1135	buildings(nb)%params_waste_heat_h = building_pars(134,bt)
1136	buildings(nb)%params_waste_heat_c = building_pars(135,bt)
1137
1138	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
1139	buildings(nb)%air_change_low = summer_pars(0,bt)
1140	buildings(nb)%air_change_high = summer_pars(1,bt)
1141	ELSE
1142	buildings(nb)%air_change_low = winter_pars(0,bt)
1143	buildings(nb)%air_change_high = winter_pars(1,bt)
1144	ENDIF
1145
1146	!
1147	!-- Initialize ventilaation load. Please note, building types > 7
1148	!-- are actually not allowed (check already in urban_surface_mod
1149	!-- and netcdf_data_input_mod. However, the building data base may
1150	!-- be later extended.
1151	IF ( bt == 1 .OR. bt == 2 .OR. &
1152	bt == 3 .OR. bt == 10 .OR. &
1153	bt == 11 .OR. bt == 12 ) THEN
1154	buildings(nb)%ventilation_int_loads = 1
1155	!
1156	!-- Office, building with large windows
1157	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
1158	bt == 6 .OR. bt == 7 .OR. &
1159	bt == 8 .OR. bt == 9) THEN
1160	buildings(nb)%ventilation_int_loads = 2
1161	!
1162	!-- Industry, hospitals
1163	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
1164	bt == 15 .OR. bt == 16 .OR. &
1165	bt == 17 .OR. bt == 18 ) THEN
1166	buildings(nb)%ventilation_int_loads = 3
1167	ENDIF
1168	ENDIF
1169	ENDDO
1170	ENDDO
1171	ENDIF
1172	!
1173	!-- Calculation of surface-related heat transfer coeffiecient out of standard u-values from building
1174	!-- database.
1175	!-- Only amount of extern and surface is used.
1176	!-- Otherwise amount between air and surface taken account twice.
1177	DO nb = 1, num_build
1178	IF ( buildings(nb)%on_pe ) THEN
1179	du_win_tmp = 1.0_wp / buildings(nb)%u_value_win
1180	u_tmp = buildings(nb)%u_value_win * ( du_win_tmp / ( du_win_tmp - &
1181	0.125_wp + ( 1.0_wp / h_is ) ) )
1182
1183	du_tmp = 1.0_wp / u_tmp
1184
1185	buildings(nb)%h_es = 1.0_wp / ( du_tmp - ( 1.0_wp / h_is ) )
1186
1187	ENDIF
1188	ENDDO
1189	!
1190	!-- Initialize indoor temperature. Actually only for output at initial state.
1191	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
1192	DO nb = 1, num_build
1193	IF ( buildings(nb)%on_pe ) THEN
1194	buildings(nb)%t_in(:) = initial_indoor_temperature
1195
1196	!
1197	!-- (after first loop, use theta_m_t as theta_m_t_prev)
1198	buildings(nb)%theta_m_t_prev_h(:) = initial_indoor_temperature
1199	buildings(nb)%theta_m_t_prev_v(:) = initial_indoor_temperature
1200
1201	ENDIF
1202	ENDDO
1203	!
1204	!-- Initialize indoor temperature at previous timestep.
1205	ELSE
1206	DO nb = 1, num_build
1207	IF ( buildings(nb)%on_pe ) THEN
1208	!
1209	!-- Mean indoor temperature can be initialized with initial value. This is just
1210	!-- used for output.
1211	buildings(nb)%t_in(:) = initial_indoor_temperature
1212	!
1213	!-- Initialize theta_m_t_prev arrays. The respective data during the restart mechanism
1214	!-- is stored on the surface-data array.
1215	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
1216	!
1217	!-- Determine indices where corresponding surface-type information is stored.
1218	l = buildings(nb)%l_h(fa)
1219	m = buildings(nb)%m_h(fa)
1220	buildings(nb)%theta_m_t_prev_h(fa) = surf_usm_h(l)%t_prev(m)
1221	ENDDO
1222	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
1223	!
1224	!-- Determine indices where corresponding surface-type information is stored.
1225	l = buildings(nb)%l_v(fa)
1226	m = buildings(nb)%m_v(fa)
1227	buildings(nb)%theta_m_t_prev_v(fa) = surf_usm_v(l)%t_prev(m)
1228	ENDDO
1229	ENDIF
1230	ENDDO
1231	ENDIF
1232
1233	CALL location_message( 'initializing indoor model', 'finished' )
1234
1235	END SUBROUTINE im_init
1236
1237
1238	!--------------------------------------------------------------------------------------------------!
1239	! Description:
1240	! ------------
1241	!> Main part of the indoor model.
1242	!> Calculation of .... (kanani: Please describe)
1243	!--------------------------------------------------------------------------------------------------!
1244	SUBROUTINE im_main_heatcool
1245
1246	! USE basic_constants_and_equations_mod, &
1247	! ONLY: c_p
1248
1249	USE control_parameters, &
1250	ONLY: time_since_reference_point
1251
1252	USE grid_variables, &
1253	ONLY: dx, dy
1254
1255	USE pegrid
1256
1257	USE surface_mod, &
1258	ONLY: ind_pav_green, &
1259	ind_veg_wall, &
1260	ind_wat_win, &
1261	surf_usm_h, &
1262	surf_usm_v
1263
1264	USE urban_surface_mod, &
1265	ONLY: building_type, &
1266	nzt_wall, &
1267	t_green_h, &
1268	t_green_v, &
1269	t_wall_h, &
1270	t_wall_v, &
1271	t_window_h, &
1272	t_window_v
1273
1274
1275	INTEGER(iwp) :: fa !< running index for facade elements of each building
1276	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
1277	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
1278	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
1279	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
1280	INTEGER(iwp) :: l !< running index for surface-element orientation
1281	INTEGER(iwp) :: m !< running index surface elements
1282	INTEGER(iwp) :: nb !< running index for buildings
1283
1284	LOGICAL :: during_spinup !< flag indicating that the simulation is still in wall/soil spinup
1285
1286	REAL(wp) :: frac_green !< dummy for green fraction
1287	REAL(wp) :: frac_wall !< dummy for wall fraction
1288	REAL(wp) :: frac_win !< dummy for window fraction
1289	! REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
1290	REAL(wp) :: indoor_wall_temperature !< temperature of innermost wall layer evtl in im_calc_temperatures einfÃŒgen
1291	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
1292	REAL(wp) :: second_of_day !< second of the current day
1293	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
1294
1295	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
1296	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
1297	!
1298	!-- Determine time of day in hours.
1299	CALL get_date_time( time_since_reference_point, second_of_day=second_of_day )
1300	time_utc_hour = second_of_day / seconds_per_hour
1301	!
1302	!-- Check if the simulation is still in wall/soil spinup mode
1303	during_spinup = MERGE( .TRUE., .FALSE., time_since_reference_point < 0.0_wp )
1304	!
1305	!-- Following calculations must be done for each facade element.
1306	DO nb = 1, num_build
1307	!
1308	!-- First, check whether building is present on local subdomain.
1309	IF ( buildings(nb)%on_pe ) THEN
1310	!
1311	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
1312	!-- Residental Building, panel WBS 70
1313	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
1314	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
1315	schedule_d = 0
1316	ELSE
1317	schedule_d = 1
1318	ENDIF
1319	ENDIF
1320	!
1321	!-- Office, building with large windows
1322	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
1323	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
1324	schedule_d = 1
1325	ELSE
1326	schedule_d = 0
1327	ENDIF
1328	ENDIF
1329	!
1330	!-- Industry, hospitals
1331	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
1332	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
1333	schedule_d = 1
1334	ELSE
1335	schedule_d = 0
1336	ENDIF
1337	ENDIF
1338	!
1339	!-- Initialize/reset indoor temperature - note, this is only for output
1340	buildings(nb)%t_in_l = 0.0_wp
1341	!
1342	!-- Horizontal surfaces
1343	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
1344	!
1345	!-- Determine indices where corresponding surface-type information is stored.
1346	l = buildings(nb)%l_h(fa)
1347	m = buildings(nb)%m_h(fa)
1348	!
1349	!-- During spinup set window fraction to zero and add these to wall fraction.
1350	frac_win = MERGE( surf_usm_h(l)%frac(m,ind_wat_win), 0.0_wp, .NOT. during_spinup )
1351	frac_wall = MERGE( surf_usm_h(l)%frac(m,ind_veg_wall), &
1352	surf_usm_h(l)%frac(m,ind_veg_wall) + &
1353	surf_usm_h(l)%frac(m,ind_wat_win), &
1354	.NOT. during_spinup )
1355	frac_green = surf_usm_h(l)%frac(m,ind_pav_green)
1356	!
1357	!-- Determine building height level index.
1358	kk = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
1359	!
1360	!-- Building geometries --> not time-dependent
1361	facade_element_area = dx * dy !< [m2] surface area per facade element
1362	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
1363	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
1364	buildings(nb)%area_facade = facade_element_area * &
1365	( buildings(nb)%num_facades_per_building_h + &
1366	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
1367	window_area_per_facade = frac_win * facade_element_area !< [m2] window area per facade element
1368
1369	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
1370	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
1371	!< pointing to zone Eq. (9) according to section 7.2.2.2
1372	a_m = buildings(nb)%factor_a * total_area * &
1373	( facade_element_area / buildings(nb)%area_facade ) * &
1374	buildings(nb)%lambda_at !< [m2] standard values
1375	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
1376	c_m = buildings(nb)%factor_c * total_area * &
1377	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
1378	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
1379	!
1380	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
1381	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
1382
1383	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
1384	!< (m2 K) between surface and air, Eq. (9)
1385	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
1386	!< (m2 K) between component and surface, Eq. (64)
1387	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
1388	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
1389	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
1390	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63),
1391	!< Section 12.2.2
1392	!
1393	!-- Internal air loads dependent on the occupacy of the room.
1394	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int).
1395	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
1396	* floor_area_per_facade )
1397	q_int = phi_ia / total_area
1398	!
1399	!-- Airflow dependent on the occupacy of the room.
1400	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
1401	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
1402	!
1403	!-- Heat transfer of ventilation.
1404	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
1405	!-- capacity of air 0.33 Wh/m2K.
1406	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
1407	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
1408
1409	!-- Heat transfer coefficient auxiliary variables
1410	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
1411	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
1412	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
1413	!
1414	!-- Net short-wave radiation through window area (was i_global)
1415	net_sw_in = surf_usm_h(l)%rad_sw_in(m) - surf_usm_h(l)%rad_sw_out(m)
1416	!
1417	!-- Quantities needed for im_calc_temperatures
1418	i = surf_usm_h(l)%i(m)
1419	j = surf_usm_h(l)%j(m)
1420	k = surf_usm_h(l)%k(m)
1421	near_facade_temperature = surf_usm_h(l)%pt_10cm(m)
1422	! indoor_wall_window_temperature = frac_wall * t_wall_h(l)%val(nzt_wall,m) &
1423	! + frac_win * t_window_h(l)%val(nzt_wall,m) &
1424	! + frac_green * t_green_h(l)%val(nzt_wall,m)
1425	indoor_wall_temperature = frac_wall * t_wall_h(l)%val(nzt_wall,m) &
1426	+ frac_win * t_window_h(l)%val(nzt_wall,m) &
1427	+ frac_green * t_green_h(l)%val(nzt_wall,m)
1428	!
1429	!-- Solar thermal gains. If net_sw_in larger than sun-protection threshold parameter
1430	!-- (params_solar_protection), sun protection will be activated.
1431	IF ( net_sw_in <= params_solar_protection ) THEN
1432	solar_protection_off = 1
1433	solar_protection_on = 0
1434	ELSE
1435	solar_protection_off = 0
1436	solar_protection_on = 1
1437	ENDIF
1438	!
1439	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
1440	!-- automatic sun protection.
1441	!-- DIN 4108 - 2 chap.8
1442	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
1443	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
1444	solar_protection_on ) &
1445	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
1446	q_sol = phi_sol
1447	!
1448	!-- Calculation of the mass specific thermal load for internal and external heatsources of
1449	!-- the inner node.
1450	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with
1451	!< phi_ia=0,5*phi_int
1452	q_c_m = phi_m
1453	!
1454	!-- Calculation mass specific thermal load implied non thermal mass
1455	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
1456	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
1457	!< phi_ia=0,5*phi_int
1458	q_c_st = phi_st
1459	!
1460	!-- Calculations for deriving indoor temperature and heat flux into the wall
1461	!-- Step 1: indoor temperature without heating and cooling
1462	!-- section C.4.1 Picture C.2 zone 3)
1463	phi_hc_nd = 0.0_wp
1464
1465	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
1466	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
1467	!
1468	!-- If air temperature between border temperatures of heating and cooling, assign output
1469	!-- variable, then ready.
1470	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
1471	theta_air <= buildings(nb)%theta_int_c_set ) THEN
1472	phi_hc_nd_ac = 0.0_wp
1473	phi_hc_nd = phi_hc_nd_ac
1474	theta_air_ac = theta_air
1475	!
1476	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
1477	!-- again.
1478	ELSE
1479	!
1480	!-- Temperature not correct, calculation method according to section C4.2
1481	theta_air_0 = theta_air !< temperature without heating/cooling
1482	!
1483	!-- Heating or cooling?
1484	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
1485	theta_air_set = buildings(nb)%theta_int_c_set
1486	ELSE
1487	theta_air_set = buildings(nb)%theta_int_h_set
1488	ENDIF
1489	!
1490	!-- Calculate the temperature with phi_hc_nd_10
1491	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
1492	phi_hc_nd = phi_hc_nd_10
1493
1494	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
1495	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
1496	theta_air_10 = theta_air !< temperature with 10 W/m2 of heating
1497	!
1498	!-- Avoid division by zero at first timestep where the denominator can become zero.
1499	IF ( ABS( theta_air_10 - theta_air_0 ) < 1E-10_wp ) THEN
1500	phi_hc_nd_un = phi_hc_nd_10
1501	ELSE
1502	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
1503	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
1504	ENDIF
1505	!
1506	!-- Step 3: with temperature ratio to determine the heating or cooling capacity.
1507	!-- If necessary, limit the power to maximum power.
1508	!-- section C.4.1 Picture C.2 zone 2) and 4)
1509	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
1510	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
1511	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
1512	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
1513	phi_hc_nd_ac = phi_hc_nd_un
1514	phi_hc_nd = phi_hc_nd_un
1515	ELSE
1516	!
1517	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
1518	!-- (phi_hc_nd_un negative)
1519	!-- section C.4.1 Picture C.2 zone 1) and 5)
1520	IF ( phi_hc_nd_un > 0.0_wp ) THEN
1521	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
1522	ELSE
1523	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
1524	ENDIF
1525	ENDIF
1526	phi_hc_nd = phi_hc_nd_ac
1527	!
1528	!-- Calculate the temperature with phi_hc_nd_ac (new)
1529	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
1530	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
1531	theta_air_ac = theta_air
1532	ENDIF
1533	!
1534	!-- Update theta_m_t_prev
1535	buildings(nb)%theta_m_t_prev_h(fa) = theta_m_t
1536
1537
1538	q_vent = h_v * ( theta_air - near_facade_temperature )
1539	!
1540	!-- Calculate the operating temperature with weighted mean temperature of air and mean
1541	!-- solar temperature.
1542	!-- Will be used for thermal comfort calculations.
1543	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
1544
1545	! surf_usm_h(l)%t_indoor(m) = theta_op !< not integrated now
1546	!
1547	!-- Heat flux into the wall. Value needed in urban_surface_mod to
1548	!-- calculate heat transfer through wall layers towards the facade
1549	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
1550	IF ( (facade_element_area - window_area_per_facade) > 0.0_wp ) THEN
1551	q_wall = h_t_wm * ( indoor_wall_temperature - theta_m ) &
1552	/ ( facade_element_area - window_area_per_facade )
1553	ELSE
1554	q_wall = 0.0_wp
1555	ENDIF
1556
1557	IF ( window_area_per_facade > 0.0_wp ) THEN
1558	q_win = h_t_es * ( pt(k,j,i) - theta_s ) / ( window_area_per_facade )
1559	ELSE
1560	q_win = 0.0_wp
1561	ENDIF
1562	!
1563	!-- Transfer q_wall & q_win back to USM (innermost wall/window layer)
1564	surf_usm_h(l)%iwghf_eb(m) = - q_wall
1565	surf_usm_h(l)%iwghf_eb_window(m) = - q_win
1566	!
1567	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
1568	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
1569	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
1570	!
1571	!-- Calculation of waste heat.
1572	!-- Anthropogenic heat output.
1573	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
1574	heating_on = 1
1575	cooling_on = 0
1576	ELSE
1577	heating_on = 0
1578	cooling_on = -1
1579	ENDIF
1580
1581	q_waste_heat = ( phi_hc_nd * ( &
1582	buildings(nb)%params_waste_heat_h * heating_on + &
1583	buildings(nb)%params_waste_heat_c * cooling_on ) &
1584	) / facade_element_area !< [W/m2] , observe the directional convention in PALM!
1585	!
1586	!-- Store waste heat and previous previous indoor temperature on surface-data type.
1587	!-- These will be used in the urban-surface model.
1588	surf_usm_h(l)%t_prev(m) = buildings(nb)%theta_m_t_prev_h(fa)
1589	surf_usm_h(l)%waste_heat(m) = q_waste_heat
1590	ENDDO !< Horizontal surfaces loop
1591	!
1592	!-- Vertical surfaces
1593	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
1594	!
1595	!-- Determine indices where corresponding surface-type information is stored.
1596	l = buildings(nb)%l_v(fa)
1597	m = buildings(nb)%m_v(fa)
1598
1599	!
1600	!-- During spinup set window fraction to zero and add these to wall fraction.
1601	frac_win = MERGE( surf_usm_v(l)%frac(m,ind_wat_win), 0.0_wp, .NOT. during_spinup )
1602	frac_wall = MERGE( surf_usm_v(l)%frac(m,ind_veg_wall), &
1603	surf_usm_v(l)%frac(m,ind_veg_wall) + &
1604	surf_usm_v(l)%frac(m,ind_wat_win), &
1605	.NOT. during_spinup )
1606	frac_green = surf_usm_v(l)%frac(m,ind_pav_green)
1607	!
1608	!-- Determine building height level index.
1609	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
1610	!
1611	!-- (SOME OF THE FOLLOWING (not time-dependent) COULD PROBABLY GO INTO A FUNCTION
1612	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
1613	!-- Building geometries --> not time-dependent
1614	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk+1) !< [m2] surface area per facade element
1615	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk+1) !< [m2] surface area per facade element
1616
1617	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
1618	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
1619	buildings(nb)%area_facade = facade_element_area * &
1620	( buildings(nb)%num_facades_per_building_h + &
1621	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
1622	window_area_per_facade = frac_win * facade_element_area !< [m2] window area per facade element
1623
1624	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
1625	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
1626	!< pointing to zone Eq. (9) according to section 7.2.2.2
1627	a_m = buildings(nb)%factor_a * total_area * &
1628	( facade_element_area / buildings(nb)%area_facade ) * &
1629	buildings(nb)%lambda_at !< [m2] standard values
1630	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
1631	c_m = buildings(nb)%factor_c * total_area * &
1632	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
1633	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
1634	!
1635	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
1636	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
1637
1638	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
1639	!< (m2 K) between surface and air, Eq. (9)
1640	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
1641	!< (m2 K) between component and surface, Eq. (64)
1642	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
1643	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
1644	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
1645	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
1646	!
1647	!-- Internal air loads dependent on the occupacy of the room.
1648	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy
1649	!-- (qint_high) (0,5*phi_int)
1650	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
1651	* floor_area_per_facade )
1652	q_int = phi_ia
1653
1654	!
1655	!-- Airflow dependent on the occupacy of the room.
1656	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy
1657	!-- (air_change_high)
1658	air_change = ( buildings(nb)%air_change_high * schedule_d + &
1659	buildings(nb)%air_change_low )
1660	!
1661	!-- Heat transfer of ventilation.
1662	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
1663	!-- capacity of air 0.33 Wh/m2K
1664	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
1665	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789
1666	!< Eq.(10)
1667
1668	!-- Heat transfer coefficient auxiliary variables
1669	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
1670	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
1671	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
1672	!
1673	!-- Net short-wave radiation through window area (was i_global)
1674	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
1675	!
1676	!-- Quantities needed for im_calc_temperatures
1677	i = surf_usm_v(l)%i(m)
1678	j = surf_usm_v(l)%j(m)
1679	k = surf_usm_v(l)%k(m)
1680	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
1681
1682	! indoor_wall_window_temperature = frac_wall * t_wall_v(l)%val(nzt_wall,m) &
1683	! + frac_win * t_window_v(l)%val(nzt_wall,m) &
1684	! + frac_green * t_green_v(l)%val(nzt_wall,m)
1685
1686	indoor_wall_temperature = frac_wall * t_wall_v(l)%val(nzt_wall,m) &
1687	+ frac_win * t_window_v(l)%val(nzt_wall,m) &
1688	+ frac_green * t_green_v(l)%val(nzt_wall,m)
1689
1690	!
1691	!-- Solar thermal gains. If net_sw_in larger than sun-protection
1692	!-- threshold parameter (params_solar_protection), sun protection will
1693	!-- be activated
1694	IF ( net_sw_in <= params_solar_protection ) THEN
1695	solar_protection_off = 1
1696	solar_protection_on = 0
1697	ELSE
1698	solar_protection_off = 0
1699	solar_protection_on = 1
1700	ENDIF
1701	!
1702	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
1703	!-- automatic sun protection.
1704	!-- DIN 4108 - 2 chap.8
1705	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
1706	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
1707	solar_protection_on ) &
1708	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
1709	q_sol = phi_sol
1710	!
1711	!-- Calculation of the mass specific thermal load for internal and external heatsources.
1712	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
1713	q_c_m = phi_m
1714	!
1715	!-- Calculation mass specific thermal load implied non thermal mass.
1716	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
1717	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
1718	!< phi_ia=0,5*phi_int
1719	q_c_st = phi_st
1720	!
1721	!-- Calculations for deriving indoor temperature and heat flux into the wall.
1722	!-- Step 1: indoor temperature without heating and cooling.
1723	!-- section C.4.1 Picture C.2 zone 3)
1724	phi_hc_nd = 0.0_wp
1725	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
1726	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
1727	!
1728	!-- If air temperature between border temperatures of heating and cooling, assign output
1729	!-- variable, then ready.
1730	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
1731	theta_air <= buildings(nb)%theta_int_c_set ) THEN
1732	phi_hc_nd_ac = 0.0_wp
1733	phi_hc_nd = phi_hc_nd_ac
1734	theta_air_ac = theta_air
1735	!
1736	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
1737	!-- again.
1738	ELSE
1739	!
1740	!-- Temperature not correct, calculation method according to section C4.2
1741	theta_air_0 = theta_air !< Note temperature without heating/cooling
1742	!
1743	!-- Heating or cooling?
1744	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
1745	theta_air_set = buildings(nb)%theta_int_c_set
1746	ELSE
1747	theta_air_set = buildings(nb)%theta_int_h_set
1748	ENDIF
1749
1750	!-- Calculate the temperature with phi_hc_nd_10
1751	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
1752	phi_hc_nd = phi_hc_nd_10
1753
1754	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
1755	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
1756
1757	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
1758	!
1759	!-- Avoid division by zero at first timestep where the denominator can become zero.
1760	IF ( ABS( theta_air_10 - theta_air_0 ) < 1E-10_wp ) THEN
1761	phi_hc_nd_un = phi_hc_nd_10
1762	ELSE
1763	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
1764	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
1765	ENDIF
1766	!
1767	!-- Step 3: with temperature ratio to determine the heating or cooling capacity
1768	!-- If necessary, limit the power to maximum power.
1769	!-- section C.4.1 Picture C.2 zone 2) and 4)
1770	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
1771	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
1772	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
1773	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
1774	phi_hc_nd_ac = phi_hc_nd_un
1775	phi_hc_nd = phi_hc_nd_un
1776	ELSE
1777	!
1778	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
1779	!-- (phi_hc_nd_un negative)
1780	!-- section C.4.1 Picture C.2 zone 1) and 5)
1781	IF ( phi_hc_nd_un > 0.0_wp ) THEN
1782	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
1783	ELSE
1784	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
1785	ENDIF
1786	ENDIF
1787	phi_hc_nd = phi_hc_nd_ac
1788	!
1789	!-- Calculate the temperature with phi_hc_nd_ac (new)
1790	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
1791	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
1792	theta_air_ac = theta_air
1793	ENDIF
1794	!
1795	!-- Update theta_m_t_prev
1796	buildings(nb)%theta_m_t_prev_v(fa) = theta_m_t
1797
1798
1799	q_vent = h_v * ( theta_air - near_facade_temperature )
1800	!
1801	!-- Calculate the operating temperature with weighted mean of temperature of air and mean.
1802	!-- Will be used for thermal comfort calculations.
1803	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
1804
1805	! surf_usm_v(l)%t_indoor(m) = theta_op !< not integrated yet
1806	!
1807	!-- Heat flux into the wall. Value needed in urban_surface_mod to
1808	!-- calculate heat transfer through wall layers towards the facade
1809	IF ( (facade_element_area - window_area_per_facade) > 0.0_wp ) THEN
1810	q_wall = h_t_wm * ( indoor_wall_temperature - theta_m ) &
1811	/ ( facade_element_area - window_area_per_facade )
1812	ELSE
1813	q_wall = 0.0_wp
1814	ENDIF
1815
1816	IF ( window_area_per_facade > 0.0_wp ) THEN
1817	q_win = h_t_es * ( pt(k,j,i) - theta_s ) / ( window_area_per_facade )
1818	ELSE
1819	q_win = 0.0_wp
1820	ENDIF
1821
1822	!
1823	!-- Transfer q_wall & q_win back to USM (innermost wall/window layer)
1824	surf_usm_v(l)%iwghf_eb(m) = - q_wall
1825	surf_usm_v(l)%iwghf_eb_window(m) = - q_win
1826
1827	! print*, "wwfjg", surf_usm_v(l)%iwghf_eb(m), surf_usm_v(l)%iwghf_eb_window(m)
1828	!
1829	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
1830	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
1831	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
1832	!
1833	!-- Calculation of waste heat.
1834	!-- Anthropogenic heat output.
1835	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
1836	heating_on = 1
1837	cooling_on = 0
1838	ELSE
1839	heating_on = 0
1840	cooling_on = -1
1841	ENDIF
1842
1843	q_waste_heat = ( phi_hc_nd * ( buildings(nb)%params_waste_heat_h * heating_on + &
1844	buildings(nb)%params_waste_heat_c * cooling_on ) &
1845	) / facade_element_area !< [W/m2] , observe the directional convention in PALM!
1846	!
1847	!-- Store waste heat and previous previous indoor temperature on surface-data type.
1848	!-- These will be used in the urban-surface model.
1849	surf_usm_v(l)%t_prev(m) = buildings(nb)%theta_m_t_prev_v(fa)
1850	surf_usm_v(l)%waste_heat(m) = q_waste_heat
1851	ENDDO !< Vertical surfaces loop
1852	ENDIF !< buildings(nb)%on_pe
1853	ENDDO !< buildings loop
1854
1855	!
1856	!-- Determine the mean building temperature.
1857	DO nb = 1, num_build
1858	!
1859	!-- Allocate dummy array used for summing-up facade elements.
1860	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
1861	!-- allocated on all PEs.
1862	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
1863	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
1864	t_in_l_send = 0.0_wp
1865	t_in_recv = 0.0_wp
1866
1867	IF ( buildings(nb)%on_pe ) THEN
1868	t_in_l_send = buildings(nb)%t_in_l
1869	ENDIF
1870
1871
1872	#if defined( __parallel )
1873	CALL MPI_ALLREDUCE( t_in_l_send, &
1874	t_in_recv, &
1875	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
1876	MPI_REAL, &
1877	MPI_SUM, &
1878	comm2d, &
1879	ierr )
1880
1881	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = t_in_recv
1882	#else
1883	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = buildings(nb)%t_in_l
1884	#endif
1885
1886	IF ( ALLOCATED( buildings(nb)%t_in ) ) THEN
1887	!
1888	!-- Average indoor temperature. Note, in case a building is completely surrounded by higher
1889	!-- buildings, it may have no facade elements at some height levels, which will lead to a
1890	!-- division by zero.
1891	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
1892	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) > 0 ) THEN
1893	buildings(nb)%t_in(k) = buildings(nb)%t_in(k) / &
1894	REAL( buildings(nb)%num_facade_h(k) + &
1895	buildings(nb)%num_facade_v(k), KIND = wp )
1896	ENDIF
1897	ENDDO
1898	!
1899	!-- If indoor temperature is not defined because of missing facade elements, the values from
1900	!-- the above-lying level will be taken.
1901	!-- At least at the top of the buildings facades are defined, so that at least there an indoor
1902	!-- temperature is defined. This information will propagate downwards the building.
1903	DO k = buildings(nb)%kb_max-1, buildings(nb)%kb_min, -1
1904	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) <= 0 ) THEN
1905	buildings(nb)%t_in(k) = buildings(nb)%t_in(k+1)
1906	ENDIF
1907	ENDDO
1908	ENDIF
1909
1910
1911	!
1912	!-- Deallocate dummy arrays
1913	DEALLOCATE( t_in_l_send )
1914	DEALLOCATE( t_in_recv )
1915
1916	ENDDO
1917
1918	END SUBROUTINE im_main_heatcool
1919
1920
1921	!--------------------------------------------------------------------------------------------------!
1922	! Description:
1923	!-------------
1924	!> Check data output for plant canopy model
1925	!--------------------------------------------------------------------------------------------------!
1926	SUBROUTINE im_check_data_output( var, unit )
1927
1928	CHARACTER (LEN=*) :: unit !<
1929	CHARACTER (LEN=*) :: var !<
1930
1931	SELECT CASE ( TRIM( var ) )
1932
1933
1934	CASE ( 'im_hf_roof')
1935	unit = 'W m-2'
1936
1937	CASE ( 'im_hf_wall_win' )
1938	unit = 'W m-2'
1939
1940	CASE ( 'im_hf_wall_win_waste' )
1941	unit = 'W m-2'
1942
1943	CASE ( 'im_hf_roof_waste' )
1944	unit = 'W m-2'
1945
1946	CASE ( 'im_t_indoor_mean' )
1947	unit = 'K'
1948
1949	CASE ( 'im_t_indoor_roof' )
1950	unit = 'K'
1951
1952	CASE ( 'im_t_indoor_wall_win' )
1953	unit = 'K'
1954
1955	CASE ( 'im_t_indoor_wall' )
1956	unit = 'K'
1957
1958	CASE DEFAULT
1959	unit = 'illegal'
1960
1961	END SELECT
1962
1963	END SUBROUTINE
1964
1965
1966	!--------------------------------------------------------------------------------------------------!
1967	! Description:
1968	!-------------
1969	!> Check parameters routine for plant canopy model
1970	!--------------------------------------------------------------------------------------------------!
1971	SUBROUTINE im_check_parameters
1972
1973	! USE control_parameters,
1974	! ONLY: message_string
1975
1976	END SUBROUTINE im_check_parameters
1977
1978
1979	!--------------------------------------------------------------------------------------------------!
1980	! Description:
1981	!-------------
1982	!> Subroutine defining appropriate grid for netcdf variables.
1983	!> It is called from subroutine netcdf.
1984	!--------------------------------------------------------------------------------------------------!
1985	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
1986
1987	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
1988	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
1989	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
1990	CHARACTER (LEN=*), INTENT(IN) :: var
1991
1992	LOGICAL, INTENT(OUT) :: found
1993
1994
1995	found = .TRUE.
1996	!
1997	!-- Check for the grid
1998	SELECT CASE ( TRIM( var ) )
1999
2000	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
2001	grid_x = 'x'
2002	grid_y = 'y'
2003	grid_z = 'zw'
2004	!
2005	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
2006	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
2007	grid_x = 'x'
2008	grid_y = 'y'
2009	grid_z = 'zu'
2010
2011	CASE ( 'im_t_indoor_mean', 'im_t_indoor_roof', 'im_t_indoor_wall_win', 'indoor_wall' )
2012	grid_x = 'x'
2013	grid_y = 'y'
2014	grid_z = 'zw'
2015
2016	CASE DEFAULT
2017	found = .FALSE.
2018	grid_x = 'none'
2019	grid_y = 'none'
2020	grid_z = 'none'
2021	END SELECT
2022
2023	END SUBROUTINE im_define_netcdf_grid
2024
2025
2026	!--------------------------------------------------------------------------------------------------!
2027	! Description:
2028	! ------------
2029	!> Subroutine defining 3D output variables
2030	!--------------------------------------------------------------------------------------------------!
2031	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
2032
2033	USE indices
2034
2035	USE kinds
2036
2037	CHARACTER (LEN=*) :: variable !<
2038
2039	INTEGER(iwp) :: av !<
2040	INTEGER(iwp) :: i !<
2041	INTEGER(iwp) :: j !<
2042	INTEGER(iwp) :: k !<
2043	INTEGER(iwp) :: l !<
2044	INTEGER(iwp) :: m !<
2045	INTEGER(iwp) :: nb !< index of the building in the building data structure
2046	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
2047	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
2048
2049	LOGICAL :: found !<
2050
2051	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
2052
2053	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
2054
2055	local_pf = fill_value
2056
2057	found = .TRUE.
2058
2059	SELECT CASE ( TRIM( variable ) )
2060	!
2061	!-- Output of indoor temperature. All grid points within the building are filled with values,
2062	!-- while atmospheric grid points are set to _FillValues.
2063	CASE ( 'im_t_indoor_mean' )
2064	IF ( av == 0 ) THEN
2065	DO i = nxl, nxr
2066	DO j = nys, nyn
2067	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
2068	!
2069	!-- Determine index of the building within the building data structure.
2070	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
2071	IF ( buildings(nb)%on_pe ) THEN
2072	!
2073	!-- Write mean building temperature onto output array. Please note, in
2074	!-- contrast to many other loops in the output, the vertical bounds are
2075	!-- determined by the lowest and hightest vertical index occupied by the
2076	!-- building.
2077	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
2078	local_pf(i,j,k) = buildings(nb)%t_in(k)
2079	ENDDO
2080	ENDIF
2081	ENDIF
2082	ENDDO
2083	ENDDO
2084	ENDIF
2085
2086	CASE ( 'im_hf_roof' )
2087	IF ( av == 0 ) THEN
2088	DO m = 1, surf_usm_h(0)%ns
2089	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
2090	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
2091	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
2092	local_pf(i,j,k) = surf_usm_h(0)%iwghf_eb(m)
2093	ENDDO
2094	ENDIF
2095
2096	CASE ( 'im_hf_roof_waste' )
2097	IF ( av == 0 ) THEN
2098	DO m = 1, surf_usm_h(0)%ns
2099	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
2100	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
2101	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
2102	local_pf(i,j,k) = surf_usm_h(0)%waste_heat(m)
2103	ENDDO
2104	ENDIF
2105
2106	CASE ( 'im_hf_wall_win' )
2107	IF ( av == 0 ) THEN
2108	DO l = 0, 3
2109	DO m = 1, surf_usm_v(l)%ns
2110	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
2111	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
2112	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
2113	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
2114	ENDDO
2115	ENDDO
2116	ENDIF
2117
2118	CASE ( 'im_hf_wall_win_waste' )
2119	IF ( av == 0 ) THEN
2120	DO l = 0, 3
2121	DO m = 1, surf_usm_v(l)%ns
2122	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
2123	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
2124	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
2125	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
2126	ENDDO
2127	ENDDO
2128	ENDIF
2129
2130	!
2131	!< NOTE im_t_indoor_roof and im_t_indoor_wall_win not work yet
2132
2133	! CASE ( 'im_t_indoor_roof' )
2134	! IF ( av == 0 ) THEN
2135	! DO m = 1, surf_usm_h%ns
2136	! i = surf_usm_h%i(m) !+ surf_usm_h%ioff
2137	! j = surf_usm_h%j(m) !+ surf_usm_h%joff
2138	! k = surf_usm_h%k(m) !+ surf_usm_h%koff
2139	! local_pf(i,j,k) = surf_usm_h%t_indoor(m)
2140	! ENDDO
2141	! ENDIF
2142	!
2143	! CASE ( 'im_t_indoor_wall_win' )
2144	! IF ( av == 0 ) THEN
2145	! DO l = 0, 3
2146	! DO m = 1, surf_usm_v(l)%ns
2147	! i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
2148	! j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
2149	! k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
2150	! local_pf(i,j,k) = surf_usm_v(l)%t_indoor(m)
2151	! ENDDO
2152	! ENDDO
2153	! ENDIF
2154
2155	CASE DEFAULT
2156	found = .FALSE.
2157
2158	END SELECT
2159
2160	END SUBROUTINE im_data_output_3d
2161
2162
2163	!--------------------------------------------------------------------------------------------------!
2164	! Description:
2165	! ------------
2166	!> Parin for &indoor_parameters for indoor model
2167	!--------------------------------------------------------------------------------------------------!
2168	SUBROUTINE im_parin
2169
2170	USE control_parameters, &
2171	ONLY: indoor_model
2172
2173
2174	CHARACTER(LEN=100) :: line !< string containing current line of file PARIN
2175
2176	INTEGER(iwp) :: io_status !< status after reading the namelist file
2177
2178	LOGICAL :: switch_off_module = .FALSE. !< local namelist parameter to switch off the module
2179	!< although the respective module namelist appears in
2180	!< the namelist file
2181
2182	NAMELIST /indoor_parameters/ indoor_during_spinup, &
2183	initial_indoor_temperature, &
2184	switch_off_module
2185
2186	!
2187	!-- Move to the beginning of the namelist file and try to find and read the namelist.
2188	REWIND( 11 )
2189	READ( 11, indoor_parameters, IOSTAT=io_status )
2190
2191	!
2192	!-- Action depending on the READ status
2193	IF ( io_status == 0 ) THEN
2194	!
2195	!-- indoor_parameters namelist was found and read correctly. Set flag that indicates that the
2196	!-- indoor model is switched on.
2197	IF ( .NOT. switch_off_module ) indoor_model = .TRUE.
2198
2199	ELSEIF ( io_status > 0 ) THEN
2200	!
2201	!-- indoor_parameters namelist was found, but contained errors. Print an error message including
2202	!-- the line that caused the problem.
2203	BACKSPACE( 11 )
2204	READ( 11 , '(A)' ) line
2205	CALL parin_fail_message( 'indoor_parameters', line )
2206
2207	ENDIF
2208
2209	!
2210	!-- Activate spinup (maybe later
2211	! IF ( spinup_time > 0.0_wp ) THEN
2212	! coupling_start_time = spinup_time
2213	! end_time = end_time + spinup_time
2214	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
2215	! spinup_pt_mean = pt_surface
2216	! ENDIF
2217	! spinup = .TRUE.
2218	! ENDIF
2219
2220	END SUBROUTINE im_parin
2221
2222
2223	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 4851

Download in other formats: