Home

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 4686

Last change on this file since 4686 was 4681, checked in by pavelkrc, 4 years ago
Fix indexing of horizontal surfaces in indoor model
Property svn:keywords set to `Id`
File size: 104.1 KB

Line
1	!> @file indoor_model_mod.f90
2	!--------------------------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
7	! (at your option) any later version.
8	!
9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
11	! Public License for more details.
12	!
13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
14	! <http://www.gnu.org/licenses/>.
15	!
16	! Copyright 2018-2020 Leibniz Universitaet Hannover
17	! Copyright 2018-2020 Hochschule Offenburg
18	!--------------------------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: indoor_model_mod.f90 4681 2020-09-16 10:23:06Z pavelkrc $
27	! Bugfix for implementation of downward surfaces
28	!
29	! 4671 2020-09-09 20:27:58Z pavelkrc
30	! Implementation of downward facing USM and LSM surfaces
31	!
32	! 4646 2020-08-24 16:02:40Z raasch
33	! file re-formatted to follow the PALM coding standard
34	!
35	! 4481 2020-03-31 18:55:54Z maronga
36	! Change order of dimension in surface array %frac to allow for better vectorization.
37	!
38	! 4441 2020-03-04 19:20:35Z suehring
39	! Major bugfix in calculation of energy demand - floor-area-per-facade was wrongly calculated
40	! leading to unrealistically high energy demands and thus to unreallistically high waste-heat
41	! fluxes.
42	!
43	! 4346 2019-12-18 11:55:56Z motisi
44	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
45	! information used in wall_flags_static_0
46	!
47	! 4329 2019-12-10 15:46:36Z motisi
48	! Renamed wall_flags_0 to wall_flags_static_0
49	!
50	! 4310 2019-11-26 19:01:28Z suehring
51	! Remove dt_indoor from namelist input. The indoor model is an hourly-based model, calling it
52	! more/less often lead to inaccurate results.
53	!
54	! 4299 2019-11-22 10:13:38Z suehring
55	! Output of indoor temperature revised (to avoid non-defined values within buildings)
56	!
57	! 4267 2019-10-16 18:58:49Z suehring
58	! Bugfix in initialization, some indices to access building_pars where wrong.
59	! Introduction of seasonal parameters.
60	!
61	! 4246 2019-09-30 09:27:52Z pavelkrc
62	!
63	!
64	! 4242 2019-09-27 12:59:10Z suehring
65	! Bugfix in array index
66	!
67	! 4238 2019-09-25 16:06:01Z suehring
68	! - Bugfix in determination of minimum facade height and in location message
69	! - Bugfix, avoid division by zero
70	! - Some optimization
71	!
72	! 4227 2019-09-10 18:04:34Z gronemeier
73	! implement new palm_date_time_mod
74	!
75	! 4217 2019-09-04 09:47:05Z scharf
76	! Corrected "Former revisions" section
77	!
78	! 4209 2019-09-02 12:00:03Z suehring
79	! - Bugfix in initialization of indoor temperature
80	! - Prescibe default indoor temperature in case it is not given in the namelist input
81	!
82	! 4182 2019-08-21 14:37:54Z scharf
83	! Corrected "Former revisions" section
84	!
85	! 4148 2019-08-08 11:26:00Z suehring
86	! Bugfix in case of non grid-resolved buildings. Further, vertical grid spacing is now considered at
87	! the correct level.
88	! - change calculation of a_m and c_m
89	! - change calculation of u-values (use h_es in building array)
90	! - rename h_tr_... to h_t_...
91	! h_tr_em to h_t_wm
92	! h_tr_op to h_t_wall
93	! h_tr_w to h_t_es
94	! - rename h_ve to h_v
95	! - rename h_is to h_ms
96	! - inserted net_floor_area
97	! - inserted params_waste_heat_h, params_waste_heat_c from building database
98	! in building array
99	! - change calculation of q_waste_heat
100	! - bugfix in averaging mean indoor temperature
101	!
102	! 3759 2019-02-21 15:53:45Z suehring
103	! - Calculation of total building volume
104	! - Several bugfixes
105	! - Calculation of building height revised
106	!
107	! 3745 2019-02-15 18:57:56Z suehring
108	! - remove building_type from module
109	! - initialize parameters for each building individually instead of a bulk initializaion with
110	! identical building type for all
111	! - output revised
112	! - add missing _wp
113	! - some restructuring of variables in building data structure
114	!
115	! 3744 2019-02-15 18:38:58Z suehring
116	! Some interface calls moved to module_interface + cleanup
117	!
118	! 3469 2018-10-30 20:05:07Z kanani
119	! Initial revision (tlang, suehring, kanani, srissman)!
120	!
121	! Authors:
122	! --------
123	! @author Tobias Lang
124	! @author Jens Pfafferott
125	! @author Farah Kanani-Suehring
126	! @author Matthias Suehring
127	! @author Sascha RiÃmann
128	!
129	!
130	! Description:
131	! ------------
132	!> Module for Indoor Climate Model (ICM)
133	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
134	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
135	!> This module differs between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine
136	!> thermal comfort
137	!> the heat transfer between indoor and outdoor is simplified
138
139	!> @todo Many statement comments that are given as doxygen comments need to be changed to normal comments
140	!> @todo Replace window_area_per_facade by %frac(1,m) for window
141	!> @todo emissivity change for window blinds if solar_protection_on=1
142
143	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
144	!> @note How to write indoor temperature output to pt array?
145	!>
146	!> @bug <Enter known bugs here>
147	!--------------------------------------------------------------------------------------------------!
148	MODULE indoor_model_mod
149
150	USE arrays_3d, &
151	ONLY: ddzw, &
152	dzw, &
153	pt
154
155	USE control_parameters, &
156	ONLY: initializing_actions
157
158	USE kinds
159
160	USE netcdf_data_input_mod, &
161	ONLY: building_id_f, building_type_f
162
163	USE palm_date_time_mod, &
164	ONLY: get_date_time, northward_equinox, seconds_per_hour, southward_equinox
165
166	USE surface_mod, &
167	ONLY: surf_usm_h, surf_usm_v
168
169
170	IMPLICIT NONE
171
172	!
173	!-- Define data structure for buidlings.
174	TYPE build
175
176	INTEGER(iwp) :: id !< building ID
177	INTEGER(iwp) :: kb_max !< highest vertical index of a building
178	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
179	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
180	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
181	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
182	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
183	INTEGER(iwp) :: ventilation_int_loads !< [-] allocation of activity in the building
184
185	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_h !< index array linking surface-element orientation index
186	!< for horizontal surfaces with building
187	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
188	!< for vertical surfaces with building
189	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
190	!< horizontal surfaces with building
191	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
192	!< vertical surfaces with building
193	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
194	!< and height level
195	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
196	!< and height level
197
198
199	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
200
201	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
202	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
203	REAL(wp) :: area_facade !< [m2] area of total facade
204	REAL(wp) :: building_height !< building height
205	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
206	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
207	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
208	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
209	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
210	REAL(wp) :: f_c_win !< [-] shading factor
211	REAL(wp) :: fapf !< [m2/m2] floor area per facade
212	REAL(wp) :: g_value_win !< [-] SHGC factor
213	REAL(wp) :: h_es !< [W/(m2 K)] surface-related heat transfer coefficient between extern and surface
214	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
215	REAL(wp) :: height_storey !< [m] storey heigth
216	REAL(wp) :: params_waste_heat_c !< [-] anthropogenic heat outputs for cooling e.g. 1.33 for KKM with COP = 3
217	REAL(wp) :: params_waste_heat_h !< [-] anthropogenic heat outputs for heating e.g. 1 - 0.9 = 0.1 for combustion with
218	!< eta = 0.9 or -2 for WP with COP = 3
219	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
220	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (positive)
221	REAL(wp) :: q_c_max !< [W/m2] Max. Cooling heat flux per netto floor area (negative)
222	REAL(wp) :: q_h_max !< [W/m2] Max. Heating heat flux per netto floor area (positive)
223	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
224	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
225	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
226	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
227	REAL(wp) :: net_floor_area !< [m2] netto ground area
228	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
229	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
230	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
231	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
232	REAL(wp) :: vol_tot !< [m3] total building volume
233
234	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
235	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
236	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
237	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
238	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
239
240	END TYPE build
241
242	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
243
244	INTEGER(iwp) :: num_build !< total number of buildings in domain
245	!
246	!-- Declare all global variables within the module
247
248	REAL(wp), PARAMETER :: dt_indoor = 3600.0_wp !< [s] time interval for indoor-model application, fixed to
249	!< 3600.0 due to model requirements
250	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
251	!< surface and air (chap. 7.2.2.2)
252	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
253	!< component and surface (chap. 12.2.2)
254	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly
255	!< cooling 2.0_wp
256	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall
257	!< DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
258	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus
259	!< Datenbank 27 window_area_per_facade_percent
260	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation
261	!< on facade exceeds this value
262
263	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
264	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
265	INTEGER(iwp) :: solar_protection_off !< Solar protection off
266	INTEGER(iwp) :: solar_protection_on !< Solar protection on
267
268
269	REAL(wp) :: a_m !< [m2] the effective mass-related area
270	REAL(wp) :: air_change !< [1/h] Airflow
271	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
272	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
273	REAL(wp) :: floor_area_per_facade !< [m2/m2] floor area per facade area
274	REAL(wp) :: h_t_1 !< [W/K] Heat transfer coefficient auxiliary variable 1
275	REAL(wp) :: h_t_2 !< [W/K] Heat transfer coefficient auxiliary variable 2
276	REAL(wp) :: h_t_3 !< [W/K] Heat transfer coefficient auxiliary variable 3
277	REAL(wp) :: h_t_es !< [W/K] heat transfer coefficient of doors, windows, curtain walls and
278	!< glazed walls (assumption: thermal mass=0)
279	REAL(wp) :: h_t_is !< [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
280	REAL(wp) :: h_t_ms !< [W/K] Heat transfer conductance term (got with h_t_wm the thermal mass)
281	REAL(wp) :: h_t_wall !< [W/K] heat transfer coefficient of opaque components (assumption: got all
282	!< thermal mass) contains of h_t_wm and h_t_ms
283	REAL(wp) :: h_t_wm !< [W/K] Heat transfer coefficient of the emmision (got with h_t_ms the
284	!< thermal mass)
285	REAL(wp) :: h_v !< [W/K] heat transfer of ventilation
286	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
287	REAL(wp) :: initial_indoor_temperature = 293.15 !< [K] initial indoor temperature (namelist parameter)
288	REAL(wp) :: net_sw_in !< [W/m2] net short-wave radiation
289	REAL(wp) :: phi_hc_nd !< [W] heating demand and/or cooling demand
290	REAL(wp) :: phi_hc_nd_10 !< [W] heating demand and/or cooling demand for heating or cooling
291	REAL(wp) :: phi_hc_nd_ac !< [W] actual heating demand and/or cooling demand
292	REAL(wp) :: phi_hc_nd_un !< [W] unlimited heating demand and/or cooling demand which is necessary to
293	!< reach the demanded required temperature (heating is positive,
294	!< cooling is negative)
295	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
296	REAL(wp) :: phi_m !< [W] mass specific thermal load (internal and external)
297	REAL(wp) :: phi_mtot !< [W] total mass specific thermal load (internal and external)
298	REAL(wp) :: phi_sol !< [W] solar loads
299	REAL(wp) :: phi_st !< [W] mass specific thermal load implied non thermal mass
300	REAL(wp) :: q_wall_win !< [W/m2]heat flux from indoor into wall/window
301	REAL(wp) :: q_waste_heat !< [W/m2]waste heat, sum of waste heat over the roof to Palm
302
303	REAL(wp) :: q_c_m !< [W] Energy of thermal storage mass specific thermal load for internal
304	!< and external heatsources (for energy bilanz)
305	REAL(wp) :: q_c_st !< [W] Energy of thermal storage mass specific thermal load implied non
306	!< thermal mass (for energy bilanz)
307	REAL(wp) :: q_int !< [W] Energy of internal air load (for energy bilanz)
308	REAL(wp) :: q_sol !< [W] Energy of solar (for energy bilanz)
309	REAL(wp) :: q_trans !< [W] Energy of transmission (for energy bilanz)
310	REAL(wp) :: q_vent !< [W] Energy of ventilation (for energy bilanz)
311
312	REAL(wp) :: schedule_d !< [-] activation for internal loads (low or high + low)
313	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
314	REAL(wp) :: theta_air !< [degree_C] air temperature of the RC-node
315	REAL(wp) :: theta_air_0 !< [degree_C] air temperature of the RC-node in equilibrium
316	REAL(wp) :: theta_air_10 !< [degree_C] air temperature of the RC-node from a heating capacity
317	!< of 10 W/m2
318	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
319	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
320	REAL(wp) :: theta_m !< [degree_C} inner temperature of the RC-node
321	REAL(wp) :: theta_m_t !< [degree_C] (Fictive) component temperature timestep
322	REAL(wp) :: theta_m_t_prev !< [degree_C] (Fictive) component temperature previous timestep (do not change)
323	REAL(wp) :: theta_op !< [degree_C] operative temperature
324	REAL(wp) :: theta_s !< [degree_C] surface temperature of the RC-node
325	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
326	REAL(wp) :: total_area !< [m2] area of all surfaces pointing to zone
327	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
328
329	!
330	!-- Definition of seasonal parameters, summer and winter, for different building types
331	REAL(wp), DIMENSION(0:1,1:7) :: summer_pars = RESHAPE( (/ & ! building_type 1
332	0.5_wp, & ! basical airflow without occupancy of the room
333	2.0_wp, & ! additional airflow depend of occupancy of the room
334	0.5_wp, & ! building_type 2: basical airflow without occupancy
335	! of the room
336	2.0_wp, & ! additional airflow depend of occupancy of the room
337	0.8_wp, & ! building_type 3: basical airflow without occupancy
338	! of the room
339	2.0_wp, & ! additional airflow depend of occupancy of the room
340	0.1_wp, & ! building_type 4: basical airflow without occupancy
341	! of the room
342	1.5_wp, & ! additional airflow depend of occupancy of the room
343	0.1_wp, & ! building_type 5: basical airflow without occupancy
344	! of the room
345	1.5_wp, & ! additional airflow depend of occupancy of the room
346	0.1_wp, & ! building_type 6: basical airflow without occupancy
347	! of the room
348	1.5_wp, & ! additional airflow depend of occupancy of the room
349	0.1_wp, & ! building_type 7: basical airflow without occupancy
350	! of the room
351	1.5_wp & ! additional airflow depend of occupancy of the room
352	/), (/ 2, 7 /) )
353
354	REAL(wp), DIMENSION(0:1,1:7) :: winter_pars = RESHAPE( (/ & ! building_type 1
355	0.1_wp, & ! basical airflow without occupancy of the room
356	0.5_wp, & ! additional airflow depend of occupancy of the room
357	0.1_wp, & ! building_type 2: basical airflow without occupancy
358	! of the room
359	0.5_wp, & ! additional airflow depend of occupancy of the room
360	0.1_wp, & ! building_type 3: basical airflow without occupancy
361	! of the room
362	0.5_wp, & ! additional airflow depend of occupancy of the room
363	0.1_wp, & ! building_type 4: basical airflow without occupancy
364	! of the room
365	1.5_wp, & ! additional airflow depend of occupancy of the room
366	0.1_wp, & ! building_type 5: basical airflow without occupancy
367	! of the room
368	1.5_wp, & ! additional airflow depend of occupancy of the room
369	0.1_wp, & ! building_type 6: basical airflow without occupancy
370	! of the room
371	1.5_wp, & ! additional airflow depend of occupancy of the room
372	0.1_wp, & ! building_type 7: basical airflow without occupancy
373	! of the room
374	1.5_wp & ! additional airflow depend of occupancy of the room
375	/), (/ 2, 7 /) )
376
377	SAVE
378
379
380	PRIVATE
381
382	!
383	!-- Add INTERFACES that must be available to other modules
384	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, im_check_data_output, &
385	im_data_output_3d, im_check_parameters
386
387
388	!
389	!-- Add VARIABLES that must be available to other modules
390	PUBLIC dt_indoor, skip_time_do_indoor, time_indoor
391
392	!
393	!-- PALM interfaces:
394	!-- Data output checks for 2D/3D data to be done in check_parameters
395	INTERFACE im_check_data_output
396	MODULE PROCEDURE im_check_data_output
397	END INTERFACE im_check_data_output
398	!
399	!-- Input parameter checks to be done in check_parameters
400	INTERFACE im_check_parameters
401	MODULE PROCEDURE im_check_parameters
402	END INTERFACE im_check_parameters
403	!
404	!-- Data output of 3D data
405	INTERFACE im_data_output_3d
406	MODULE PROCEDURE im_data_output_3d
407	END INTERFACE im_data_output_3d
408
409	!
410	!-- Definition of data output quantities
411	INTERFACE im_define_netcdf_grid
412	MODULE PROCEDURE im_define_netcdf_grid
413	END INTERFACE im_define_netcdf_grid
414	!
415	! !
416	! !-- Output of information to the header file
417	! INTERFACE im_header
418	! MODULE PROCEDURE im_header
419	! END INTERFACE im_header
420	!
421	!-- Calculations for indoor temperatures
422	INTERFACE im_calc_temperatures
423	MODULE PROCEDURE im_calc_temperatures
424	END INTERFACE im_calc_temperatures
425	!
426	!-- Initialization actions
427	INTERFACE im_init
428	MODULE PROCEDURE im_init
429	END INTERFACE im_init
430	!
431	!-- Main part of indoor model
432	INTERFACE im_main_heatcool
433	MODULE PROCEDURE im_main_heatcool
434	END INTERFACE im_main_heatcool
435	!
436	!-- Reading of NAMELIST parameters
437	INTERFACE im_parin
438	MODULE PROCEDURE im_parin
439	END INTERFACE im_parin
440
441	CONTAINS
442
443	!--------------------------------------------------------------------------------------------------!
444	! Description:
445	! ------------
446	!< Calculation of the air temperatures and mean radiation temperature.
447	!< This is basis for the operative temperature.
448	!< Based on a Crank-Nicholson scheme with a timestep of a hour.
449	!--------------------------------------------------------------------------------------------------!
450	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
451	near_facade_temperature, phi_hc_nd_dummy )
452
453	INTEGER(iwp) :: i
454	INTEGER(iwp) :: j
455	INTEGER(iwp) :: k
456
457	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
458	REAL(wp) :: near_facade_temperature
459	REAL(wp) :: phi_hc_nd_dummy
460	!
461	!-- Calculation of total mass specific thermal load (internal and external)
462	phi_mtot = ( phi_m + h_t_wm * indoor_wall_window_temperature &
463	+ h_t_3 * ( phi_st + h_t_es * pt(k,j,i) &
464	+ h_t_1 * &
465	( ( ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
466	+ near_facade_temperature ) &
467	) / h_t_2 &
468	) !< [degree_C] Eq. (C.5)
469	!
470	!-- Calculation of component temperature at factual timestep
471	theta_m_t = ( ( theta_m_t_prev &
472	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_t_3 + h_t_wm ) ) &
473	+ phi_mtot &
474	) &
475	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_t_3 + h_t_wm ) ) &
476	) !< [degree_C] Eq. (C.4)
477	!
478	!-- Calculation of mean inner temperature for the RC-node in actual timestep
479	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
480
481	!
482	!-- Calculation of mean surface temperature of the RC-node in actual timestep
483	theta_s = ( ( h_t_ms * theta_m + phi_st + h_t_es * pt(k,j,i) &
484	+ h_t_1 * ( near_facade_temperature &
485	+ ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
486	) &
487	/ ( h_t_ms + h_t_es + h_t_1 ) &
488	) !< [degree_C] Eq. (C.10)
489
490	!
491	!-- Calculation of the air temperature of the RC-node
492	theta_air = ( h_t_is * theta_s + h_v * near_facade_temperature + phi_ia + phi_hc_nd_dummy ) / &
493	( h_t_is + h_v ) !< [degree_C] Eq. (C.11)
494
495	END SUBROUTINE im_calc_temperatures
496
497
498	!--------------------------------------------------------------------------------------------------!
499	! Description:
500	! ------------
501	!> Initialization of the indoor model.
502	!> Static information are calculated here, e.g. building parameters and geometrical information,
503	!> anything that doesn't change in time.
504	!
505	!-- Input values
506	!-- Input datas from Palm, M4
507	! i_global --> net_sw_in !< global radiation [W/m2]
508	! theta_e --> pt(k,j,i) !< undisturbed outside temperature, 1. PALM volume, for windows
509	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
510	! surf_usm_v(l)%pt_10cm(m) !< Air temperature, facade near (10cm) air temperature from
511	!< 1. Palm volume
512	! theta_node --> t_wall_h(nzt_wall,m)
513	! t_wall_v(l)%t(nzt_wall,m) !< Temperature of innermost wall layer, for opaque wall
514	!--------------------------------------------------------------------------------------------------!
515	SUBROUTINE im_init
516
517	USE control_parameters, &
518	ONLY: message_string, time_since_reference_point
519
520	USE indices, &
521	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_total_0
522
523	USE grid_variables, &
524	ONLY: dx, dy
525
526	USE pegrid
527
528	USE surface_mod, &
529	ONLY: surf_usm_h, surf_usm_v
530
531	USE urban_surface_mod, &
532	ONLY: building_pars, building_type
533
534	INTEGER(iwp) :: bt !< local building type
535	INTEGER(iwp) :: day_of_year !< day of the year
536	INTEGER(iwp) :: i !< running index along x-direction
537	INTEGER(iwp) :: j !< running index along y-direction
538	INTEGER(iwp) :: k !< running index along z-direction
539	INTEGER(iwp) :: l !< running index for surface-element orientation
540	INTEGER(iwp) :: m !< running index surface elements
541	INTEGER(iwp) :: n !< building index
542	INTEGER(iwp) :: nb !< building index
543
544	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
545	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
546	!< multiple occurences are sorted out
547	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
548	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
549	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
550	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
551	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
552	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
553	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
554	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
555	!< horizontal facade elements
556	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
557	!< vertical facade elements
558	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
559	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
560
561	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
562	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
563
564	REAL(wp) :: u_tmp !< dummy for temporary calculation of u-value without h_is
565	REAL(wp) :: du_tmp !< 1/u_tmp
566	REAL(wp) :: du_win_tmp !< 1/building(nb)%u_value_win
567	REAL(wp) :: facade_area_v !< dummy to compute the total facade area from vertical walls
568
569	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
570	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
571	!< on local subdomain
572
573	CALL location_message( 'initializing indoor model', 'start' )
574	!
575	!-- Initializing of indoor model is only possible if buildings can be distinguished by their IDs.
576	IF ( .NOT. building_id_f%from_file ) THEN
577	message_string = 'Indoor model requires information about building_id'
578	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
579	ENDIF
580	!
581	!-- Determine number of different building IDs on local subdomain.
582	num_buildings_l = 0
583	num_buildings = 0
584	ALLOCATE( build_ids_l(1) )
585	DO i = nxl, nxr
586	DO j = nys, nyn
587	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
588	IF ( num_buildings_l(myid) > 0 ) THEN
589	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
590	CYCLE
591	ELSE
592	num_buildings_l(myid) = num_buildings_l(myid) + 1
593	!
594	!-- Resize array with different local building ids
595	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
596	build_ids_l_tmp = build_ids_l
597	DEALLOCATE( build_ids_l )
598	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
599	build_ids_l(1:num_buildings_l(myid)-1) = &
600	build_ids_l_tmp(1:num_buildings_l(myid)-1)
601	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
602	DEALLOCATE( build_ids_l_tmp )
603	ENDIF
604	!
605	!-- First occuring building id on PE
606	ELSE
607	num_buildings_l(myid) = num_buildings_l(myid) + 1
608	build_ids_l(1) = building_id_f%var(j,i)
609	ENDIF
610	ENDIF
611	ENDDO
612	ENDDO
613	!
614	!-- Determine number of building IDs for the entire domain. (Note, building IDs can appear multiple
615	!-- times as buildings might be distributed over several PEs.)
616	#if defined( __parallel )
617	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, comm2d, &
618	ierr )
619	#else
620	num_buildings = num_buildings_l
621	#endif
622	ALLOCATE( build_ids(1:SUM(num_buildings)) )
623	!
624	!-- Gather building IDs. Therefore, first, determine displacements used required for MPI_GATHERV
625	!-- call.
626	ALLOCATE( displace_dum(0:numprocs-1) )
627	displace_dum(0) = 0
628	DO i = 1, numprocs-1
629	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
630	ENDDO
631
632	#if defined( __parallel )
633	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
634	num_buildings(myid), &
635	MPI_INTEGER, &
636	build_ids, &
637	num_buildings, &
638	displace_dum, &
639	MPI_INTEGER, &
640	comm2d, ierr )
641
642	DEALLOCATE( displace_dum )
643
644	#else
645	build_ids = build_ids_l
646	#endif
647	!
648	!-- Note: in parallel mode, building IDs can occur mutliple times, as each PE has send its own ids.
649	!-- Therefore, sort out building IDs which appear multiple times.
650	num_build = 0
651	DO n = 1, SIZE(build_ids)
652
653	IF ( ALLOCATED(build_ids_final) ) THEN
654	IF ( ANY( build_ids(n) == build_ids_final ) ) THEN
655	CYCLE
656	ELSE
657	num_build = num_build + 1
658	!
659	!-- Resize
660	ALLOCATE( build_ids_final_tmp(1:num_build) )
661	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
662	DEALLOCATE( build_ids_final )
663	ALLOCATE( build_ids_final(1:num_build) )
664	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
665	build_ids_final(num_build) = build_ids(n)
666	DEALLOCATE( build_ids_final_tmp )
667	ENDIF
668	ELSE
669	num_build = num_build + 1
670	ALLOCATE( build_ids_final(1:num_build) )
671	build_ids_final(num_build) = build_ids(n)
672	ENDIF
673	ENDDO
674
675	!
676	!-- Allocate building-data structure array. Note, this is a global array and all building IDs on
677	!-- domain are known by each PE. Further attributes, e.g. height-dependent arrays, however, are only
678	!-- allocated on PEs where the respective building is present (in order to reduce memory demands).
679	ALLOCATE( buildings(1:num_build) )
680
681	!
682	!-- Store building IDs and check if building with certain ID is present on subdomain.
683	DO nb = 1, num_build
684	buildings(nb)%id = build_ids_final(nb)
685
686	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
687	buildings(nb)%on_pe = .TRUE.
688	ENDDO
689	!
690	!-- Determine the maximum vertical dimension occupied by each building.
691	ALLOCATE( k_min_l(1:num_build) )
692	ALLOCATE( k_max_l(1:num_build) )
693	k_min_l = nzt + 1
694	k_max_l = 0
695
696	DO i = nxl, nxr
697	DO j = nys, nyn
698	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
699	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
700	DO k = nzb, nzt+1
701	!
702	!-- Check if grid point belongs to a building.
703	IF ( BTEST( wall_flags_total_0(k,j,i), 6 ) ) THEN
704	k_min_l(nb) = MIN( k_min_l(nb), k )
705	k_max_l(nb) = MAX( k_max_l(nb), k )
706	ENDIF
707
708	ENDDO
709	ENDIF
710	ENDDO
711	ENDDO
712
713	#if defined( __parallel )
714	CALL MPI_ALLREDUCE( k_min_l(:), buildings(:)%kb_min, num_build, MPI_INTEGER, MPI_MIN, comm2d, &
715	ierr )
716	CALL MPI_ALLREDUCE( k_max_l(:), buildings(:)%kb_max, num_build, MPI_INTEGER, MPI_MAX, comm2d, &
717	ierr )
718	#else
719	buildings(:)%kb_min = k_min_l(:)
720	buildings(:)%kb_max = k_max_l(:)
721	#endif
722
723	DEALLOCATE( k_min_l )
724	DEALLOCATE( k_max_l )
725	!
726	!-- Calculate building height.
727	DO nb = 1, num_build
728	buildings(nb)%building_height = 0.0_wp
729	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
730	buildings(nb)%building_height = buildings(nb)%building_height + dzw(k+1)
731	ENDDO
732	ENDDO
733	!
734	!-- Calculate building volume
735	DO nb = 1, num_build
736	!
737	!-- Allocate temporary array for summing-up building volume
738	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
739	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
740	volume = 0.0_wp
741	volume_l = 0.0_wp
742	!
743	!-- Calculate building volume per height level on each PE where these building is present.
744	IF ( buildings(nb)%on_pe ) THEN
745
746	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
747	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
748	buildings(nb)%volume = 0.0_wp
749	buildings(nb)%vol_frac = 0.0_wp
750
751	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) THEN
752	DO i = nxl, nxr
753	DO j = nys, nyn
754	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
755	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
756	volume_l(k) = volume_l(k) + dx * dy * dzw(k+1)
757	ENDDO
758	ENDDO
759	ENDDO
760	ENDIF
761	ENDIF
762	!
763	!-- Sum-up building volume from all subdomains
764	#if defined( __parallel )
765	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, comm2d, ierr )
766	#else
767	volume = volume_l
768	#endif
769	!
770	!-- Save total building volume as well as local fraction on volume on building data structure.
771	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
772	!
773	!-- Determine fraction of local on total building volume
774	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
775	!
776	!-- Calculate total building volume
777	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
778
779	DEALLOCATE( volume )
780	DEALLOCATE( volume_l )
781
782	ENDDO
783	!
784	!-- Allocate arrays for indoor temperature.
785	DO nb = 1, num_build
786	IF ( buildings(nb)%on_pe ) THEN
787	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
788	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
789	buildings(nb)%t_in = 0.0_wp
790	buildings(nb)%t_in_l = 0.0_wp
791	ENDIF
792	ENDDO
793	!
794	!-- Allocate arrays for number of facades per height level. Distinguish between horizontal and
795	!-- vertical facades.
796	DO nb = 1, num_build
797	IF ( buildings(nb)%on_pe ) THEN
798	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
799	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
800
801	buildings(nb)%num_facade_h = 0
802	buildings(nb)%num_facade_v = 0
803	ENDIF
804	ENDDO
805	!
806	!-- Determine number of facade elements per building on local subdomain.
807	!-- Distinguish between horizontal and vertical facade elements.
808	!
809	!-- Horizontal facades
810	buildings(:)%num_facades_per_building_h_l = 0
811	DO l = 0, 1
812	DO m = 1, surf_usm_h(l)%ns
813	!
814	!-- For the current facade element determine corresponding building index.
815	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
816	!-- element and building location (for horizontal surface elements the horizontal offsets are
817	!-- zero).
818	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
819	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
820	k = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
821	!
822	!-- Determine building index and check whether building is on PE.
823	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
824
825	IF ( buildings(nb)%on_pe ) THEN
826	!
827	!-- Count number of facade elements at each height level.
828	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
829	!
830	!-- Moreover, sum up number of local facade elements per building.
831	buildings(nb)%num_facades_per_building_h_l = &
832	buildings(nb)%num_facades_per_building_h_l + 1
833	ENDIF
834	ENDDO
835	ENDDO
836	!
837	!-- Vertical facades
838	buildings(:)%num_facades_per_building_v_l = 0
839	DO l = 0, 3
840	DO m = 1, surf_usm_v(l)%ns
841	!
842	!-- For the current facade element determine corresponding building index.
843	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
844	!-- element and building location (for vertical surface elements the vertical offsets are
845	!-- zero).
846	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
847	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
848	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
849
850	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
851	IF ( buildings(nb)%on_pe ) THEN
852	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
853	buildings(nb)%num_facades_per_building_v_l = &
854	buildings(nb)%num_facades_per_building_v_l + 1
855	ENDIF
856	ENDDO
857	ENDDO
858	!
859	!-- Determine total number of facade elements per building and assign number to building data type.
860	DO nb = 1, num_build
861	!
862	!-- Allocate dummy array used for summing-up facade elements.
863	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
864	!-- allocated on all PEs.
865	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
866	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
867	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
868	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
869	num_facades_h = 0
870	num_facades_v = 0
871	receive_dum_h = 0
872	receive_dum_v = 0
873
874	IF ( buildings(nb)%on_pe ) THEN
875	num_facades_h = buildings(nb)%num_facade_h
876	num_facades_v = buildings(nb)%num_facade_v
877	ENDIF
878
879	#if defined( __parallel )
880	CALL MPI_ALLREDUCE( num_facades_h, &
881	receive_dum_h, &
882	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
883	MPI_INTEGER, &
884	MPI_SUM, &
885	comm2d, &
886	ierr )
887
888	CALL MPI_ALLREDUCE( num_facades_v, &
889	receive_dum_v, &
890	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
891	MPI_INTEGER, &
892	MPI_SUM, &
893	comm2d, &
894	ierr )
895	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) buildings(nb)%num_facade_h = receive_dum_h
896	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) buildings(nb)%num_facade_v = receive_dum_v
897	#else
898	buildings(nb)%num_facade_h = num_facades_h
899	buildings(nb)%num_facade_v = num_facades_v
900	#endif
901
902	!
903	!-- Deallocate dummy arrays
904	DEALLOCATE( num_facades_h )
905	DEALLOCATE( num_facades_v )
906	DEALLOCATE( receive_dum_h )
907	DEALLOCATE( receive_dum_v )
908	!
909	!-- Allocate index arrays which link facade elements with surface-data type.
910	!-- Please note, no height levels are considered here (information is stored in surface-data type
911	!-- itself).
912	IF ( buildings(nb)%on_pe ) THEN
913	!
914	!-- Determine number of facade elements per building.
915	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
916	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
917	!
918	!-- Allocate arrays which link the building with the horizontal and vertical urban-type
919	!-- surfaces. Please note, linking arrays are allocated over all facade elements, which is
920	!-- required in case a building is located at the subdomain boundaries, where the building and
921	!-- the corresponding surface elements are located on different subdomains.
922	ALLOCATE( buildings(nb)%l_h(1:buildings(nb)%num_facades_per_building_h_l) )
923	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
924
925	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
926	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
927	ENDIF
928
929	IF ( buildings(nb)%on_pe ) THEN
930	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
931	buildings(nb)%vpf = 0.0_wp
932
933	facade_area_v = 0.0_wp
934	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
935	facade_area_v = facade_area_v + buildings(nb)%num_facade_v(k) * dzw(k+1) * dx
936	ENDDO
937	!
938	!-- Determine volume per total facade area (vpf). For the horizontal facade area
939	!-- num_facades_per_building_h can be taken, multiplied with dx*dy.
940	!-- However, due to grid stretching, vertical facade elements must be summed-up vertically.
941	!-- Please note, if dx /= dy, an error is made!
942	buildings(nb)%vpf = buildings(nb)%vol_tot / &
943	( buildings(nb)%num_facades_per_building_h * dx * dy + facade_area_v )
944	!
945	!-- Determine floor-area-per-facade.
946	buildings(nb)%fapf = buildings(nb)%num_facades_per_building_h * dx * dy &
947	/ ( buildings(nb)%num_facades_per_building_h * dx * dy &
948	+ facade_area_v )
949	ENDIF
950	ENDDO
951	!
952	!-- Link facade elements with surface data type.
953	!-- Allocate array for counting.
954	ALLOCATE( n_fa(1:num_build) )
955	n_fa = 1
956
957	DO l = 0, 1
958	DO m = 1, surf_usm_h(l)%ns
959	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
960	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
961
962	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
963
964	IF ( buildings(nb)%on_pe ) THEN
965	buildings(nb)%l_h(n_fa(nb)) = l
966	buildings(nb)%m_h(n_fa(nb)) = m
967	n_fa(nb) = n_fa(nb) + 1
968	ENDIF
969	ENDDO
970	ENDDO
971
972	n_fa = 1
973	DO l = 0, 3
974	DO m = 1, surf_usm_v(l)%ns
975	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
976	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
977
978	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
979
980	IF ( buildings(nb)%on_pe ) THEN
981	buildings(nb)%l_v(n_fa(nb)) = l
982	buildings(nb)%m_v(n_fa(nb)) = m
983	n_fa(nb) = n_fa(nb) + 1
984	ENDIF
985	ENDDO
986	ENDDO
987	DEALLOCATE( n_fa )
988	!
989	!-- Initialize building parameters, first by mean building type. Note, in this case all buildings
990	!-- have the same type.
991	!-- In a second step initialize with building tpyes from static input file, where building types can
992	!-- be individual for each building.
993	buildings(:)%lambda_layer3 = building_pars(31,building_type)
994	buildings(:)%s_layer3 = building_pars(44,building_type)
995	buildings(:)%f_c_win = building_pars(119,building_type)
996	buildings(:)%g_value_win = building_pars(120,building_type)
997	buildings(:)%u_value_win = building_pars(121,building_type)
998	buildings(:)%eta_ve = building_pars(124,building_type)
999	buildings(:)%factor_a = building_pars(125,building_type)
1000	buildings(:)%factor_c = building_pars(126,building_type)
1001	buildings(:)%lambda_at = building_pars(127,building_type)
1002	buildings(:)%theta_int_h_set = building_pars(13,building_type)
1003	buildings(:)%theta_int_c_set = building_pars(12,building_type)
1004	buildings(:)%q_h_max = building_pars(128,building_type)
1005	buildings(:)%q_c_max = building_pars(129,building_type)
1006	buildings(:)%qint_high = building_pars(130,building_type)
1007	buildings(:)%qint_low = building_pars(131,building_type)
1008	buildings(:)%height_storey = building_pars(132,building_type)
1009	buildings(:)%height_cei_con = building_pars(133,building_type)
1010	buildings(:)%params_waste_heat_h = building_pars(134,building_type)
1011	buildings(:)%params_waste_heat_c = building_pars(135,building_type)
1012	!
1013	!-- Initialize seasonal dependent parameters, depending on day of the year.
1014	!-- First, calculated day of the year.
1015	CALL get_date_time( time_since_reference_point, day_of_year = day_of_year )
1016	!
1017	!-- Summer is defined in between northward- and southward equinox.
1018	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
1019	buildings(:)%air_change_low = summer_pars(0,building_type)
1020	buildings(:)%air_change_high = summer_pars(1,building_type)
1021	ELSE
1022	buildings(:)%air_change_low = winter_pars(0,building_type)
1023	buildings(:)%air_change_high = winter_pars(1,building_type)
1024	ENDIF
1025	!
1026	!-- Initialize ventilation load. Please note, building types > 7 are actually not allowed (check
1027	!-- already in urban_surface_mod and netcdf_data_input_mod.
1028	!-- However, the building data base may be later extended.
1029	IF ( building_type == 1 .OR. building_type == 2 .OR. &
1030	building_type == 3 .OR. building_type == 10 .OR. &
1031	building_type == 11 .OR. building_type == 12 ) THEN
1032	buildings(:)%ventilation_int_loads = 1
1033	!
1034	!-- Office, building with large windows
1035	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
1036	building_type == 6 .OR. building_type == 7 .OR. &
1037	building_type == 8 .OR. building_type == 9) THEN
1038	buildings(:)%ventilation_int_loads = 2
1039	!
1040	!-- Industry, hospitals
1041	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
1042	building_type == 15 .OR. building_type == 16 .OR. &
1043	building_type == 17 .OR. building_type == 18 ) THEN
1044	buildings(:)%ventilation_int_loads = 3
1045	ENDIF
1046	!
1047	!-- Initialization of building parameters - level 2
1048	IF ( building_type_f%from_file ) THEN
1049	DO i = nxl, nxr
1050	DO j = nys, nyn
1051	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
1052	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
1053	bt = building_type_f%var(j,i)
1054
1055	buildings(nb)%lambda_layer3 = building_pars(31,bt)
1056	buildings(nb)%s_layer3 = building_pars(44,bt)
1057	buildings(nb)%f_c_win = building_pars(119,bt)
1058	buildings(nb)%g_value_win = building_pars(120,bt)
1059	buildings(nb)%u_value_win = building_pars(121,bt)
1060	buildings(nb)%eta_ve = building_pars(124,bt)
1061	buildings(nb)%factor_a = building_pars(125,bt)
1062	buildings(nb)%factor_c = building_pars(126,bt)
1063	buildings(nb)%lambda_at = building_pars(127,bt)
1064	buildings(nb)%theta_int_h_set = building_pars(13,bt)
1065	buildings(nb)%theta_int_c_set = building_pars(12,bt)
1066	buildings(nb)%q_h_max = building_pars(128,bt)
1067	buildings(nb)%q_c_max = building_pars(129,bt)
1068	buildings(nb)%qint_high = building_pars(130,bt)
1069	buildings(nb)%qint_low = building_pars(131,bt)
1070	buildings(nb)%height_storey = building_pars(132,bt)
1071	buildings(nb)%height_cei_con = building_pars(133,bt)
1072	buildings(nb)%params_waste_heat_h = building_pars(134,bt)
1073	buildings(nb)%params_waste_heat_c = building_pars(135,bt)
1074
1075	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
1076	buildings(nb)%air_change_low = summer_pars(0,bt)
1077	buildings(nb)%air_change_high = summer_pars(1,bt)
1078	ELSE
1079	buildings(nb)%air_change_low = winter_pars(0,bt)
1080	buildings(nb)%air_change_high = winter_pars(1,bt)
1081	ENDIF
1082
1083	!
1084	!-- Initialize ventilaation load. Please note, building types > 7
1085	!-- are actually not allowed (check already in urban_surface_mod
1086	!-- and netcdf_data_input_mod. However, the building data base may
1087	!-- be later extended.
1088	IF ( bt == 1 .OR. bt == 2 .OR. &
1089	bt == 3 .OR. bt == 10 .OR. &
1090	bt == 11 .OR. bt == 12 ) THEN
1091	buildings(nb)%ventilation_int_loads = 1
1092	!
1093	!-- Office, building with large windows
1094	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
1095	bt == 6 .OR. bt == 7 .OR. &
1096	bt == 8 .OR. bt == 9) THEN
1097	buildings(nb)%ventilation_int_loads = 2
1098	!
1099	!-- Industry, hospitals
1100	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
1101	bt == 15 .OR. bt == 16 .OR. &
1102	bt == 17 .OR. bt == 18 ) THEN
1103	buildings(nb)%ventilation_int_loads = 3
1104	ENDIF
1105	ENDIF
1106	ENDDO
1107	ENDDO
1108	ENDIF
1109	!
1110	!-- Calculation of surface-related heat transfer coeffiecient out of standard u-values from building
1111	!-- database.
1112	!-- Only amount of extern and surface is used.
1113	!-- Otherwise amount between air and surface taken account twice.
1114	DO nb = 1, num_build
1115	IF ( buildings(nb)%on_pe ) THEN
1116	du_win_tmp = 1.0_wp / buildings(nb)%u_value_win
1117	u_tmp = buildings(nb)%u_value_win * ( du_win_tmp / ( du_win_tmp - &
1118	0.125_wp + ( 1.0_wp / h_is ) ) )
1119
1120	du_tmp = 1.0_wp / u_tmp
1121
1122	buildings(nb)%h_es = 1.0_wp / ( du_tmp - ( 1.0_wp / h_is ) )
1123
1124	ENDIF
1125	ENDDO
1126	!
1127	!-- Initial room temperature [K]
1128	!-- (after first loop, use theta_m_t as theta_m_t_prev)
1129	theta_m_t_prev = initial_indoor_temperature
1130	!
1131	!-- Initialize indoor temperature. Actually only for output at initial state.
1132	DO nb = 1, num_build
1133	IF ( buildings(nb)%on_pe ) buildings(nb)%t_in(:) = initial_indoor_temperature
1134	ENDDO
1135
1136	CALL location_message( 'initializing indoor model', 'finished' )
1137
1138	END SUBROUTINE im_init
1139
1140
1141	!--------------------------------------------------------------------------------------------------!
1142	! Description:
1143	! ------------
1144	!> Main part of the indoor model.
1145	!> Calculation of .... (kanani: Please describe)
1146	!--------------------------------------------------------------------------------------------------!
1147	SUBROUTINE im_main_heatcool
1148
1149	! USE basic_constants_and_equations_mod, &
1150	! ONLY: c_p
1151
1152	USE control_parameters, &
1153	ONLY: time_since_reference_point
1154
1155	USE grid_variables, &
1156	ONLY: dx, dy
1157
1158	USE pegrid
1159
1160	USE surface_mod, &
1161	ONLY: ind_veg_wall, ind_wat_win, surf_usm_h, surf_usm_v
1162
1163	USE urban_surface_mod, &
1164	ONLY: building_type, nzt_wall, t_wall_h, t_wall_v, t_window_h, t_window_v
1165
1166
1167	INTEGER(iwp) :: fa !< running index for facade elements of each building
1168	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
1169	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
1170	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
1171	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
1172	INTEGER(iwp) :: l !< running index for surface-element orientation
1173	INTEGER(iwp) :: m !< running index surface elements
1174	INTEGER(iwp) :: nb !< running index for buildings
1175
1176	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
1177	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
1178	REAL(wp) :: second_of_day !< second of the current day
1179	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
1180
1181	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
1182	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
1183	!
1184	!-- Determine time of day in hours.
1185	CALL get_date_time( time_since_reference_point, second_of_day=second_of_day )
1186	time_utc_hour = second_of_day / seconds_per_hour
1187	!
1188	!-- Following calculations must be done for each facade element.
1189	DO nb = 1, num_build
1190	!
1191	!-- First, check whether building is present on local subdomain.
1192	IF ( buildings(nb)%on_pe ) THEN
1193	!
1194	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
1195	!-- Residental Building, panel WBS 70
1196	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
1197	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
1198	schedule_d = 0
1199	ELSE
1200	schedule_d = 1
1201	ENDIF
1202	ENDIF
1203	!
1204	!-- Office, building with large windows
1205	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
1206	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
1207	schedule_d = 1
1208	ELSE
1209	schedule_d = 0
1210	ENDIF
1211	ENDIF
1212	!
1213	!-- Industry, hospitals
1214	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
1215	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
1216	schedule_d = 1
1217	ELSE
1218	schedule_d = 0
1219	ENDIF
1220	ENDIF
1221	!
1222	!-- Initialize/reset indoor temperature
1223	buildings(nb)%t_in_l = 0.0_wp
1224	!
1225	!-- Horizontal surfaces
1226	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
1227	!
1228	!-- Determine indices where corresponding surface-type information is stored.
1229	l = buildings(nb)%l_h(fa)
1230	m = buildings(nb)%m_h(fa)
1231	!
1232	!-- Determine building height level index.
1233	kk = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
1234	!
1235	!-- Building geometries --> not time-dependent
1236	facade_element_area = dx * dy !< [m2] surface area per facade element
1237	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
1238	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
1239	buildings(nb)%area_facade = facade_element_area * &
1240	( buildings(nb)%num_facades_per_building_h + &
1241	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
1242	window_area_per_facade = surf_usm_h(l)%frac(m,ind_wat_win) * facade_element_area !< [m2] window area per facade
1243	!< element
1244
1245	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
1246	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
1247	!< pointing to zone Eq. (9) according to section 7.2.2.2
1248	a_m = buildings(nb)%factor_a * total_area * &
1249	( facade_element_area / buildings(nb)%area_facade ) * &
1250	buildings(nb)%lambda_at !< [m2] standard values
1251	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
1252	c_m = buildings(nb)%factor_c * total_area * &
1253	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
1254	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
1255	!
1256	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
1257	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
1258
1259	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
1260	!< (m2 K) between surface and air, Eq. (9)
1261	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
1262	!< (m2 K) between component and surface, Eq. (64)
1263	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
1264	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
1265	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
1266	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63),
1267	!< Section 12.2.2
1268	!
1269	!-- Internal air loads dependent on the occupacy of the room.
1270	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int).
1271	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
1272	* floor_area_per_facade )
1273	q_int = phi_ia / total_area
1274	!
1275	!-- Airflow dependent on the occupacy of the room.
1276	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
1277	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
1278	!
1279	!-- Heat transfer of ventilation.
1280	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
1281	!-- capacity of air 0.33 Wh/m2K.
1282	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
1283	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
1284
1285	!-- Heat transfer coefficient auxiliary variables
1286	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
1287	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
1288	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
1289	!
1290	!-- Net short-wave radiation through window area (was i_global)
1291	net_sw_in = surf_usm_h(l)%rad_sw_in(m) - surf_usm_h(l)%rad_sw_out(m)
1292	!
1293	!-- Quantities needed for im_calc_temperatures
1294	i = surf_usm_h(l)%i(m)
1295	j = surf_usm_h(l)%j(m)
1296	k = surf_usm_h(l)%k(m)
1297	near_facade_temperature = surf_usm_h(l)%pt_10cm(m)
1298	indoor_wall_window_temperature = &
1299	surf_usm_h(l)%frac(m,ind_veg_wall) * t_wall_h(l)%val(nzt_wall,m) &
1300	+ surf_usm_h(l)%frac(m,ind_wat_win) * t_window_h(l)%val(nzt_wall,m)
1301	!
1302	!-- Solar thermal gains. If net_sw_in larger than sun-protection threshold parameter
1303	!-- (params_solar_protection), sun protection will be activated.
1304	IF ( net_sw_in <= params_solar_protection ) THEN
1305	solar_protection_off = 1
1306	solar_protection_on = 0
1307	ELSE
1308	solar_protection_off = 0
1309	solar_protection_on = 1
1310	ENDIF
1311	!
1312	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
1313	!-- automatic sun protection.
1314	!-- DIN 4108 - 2 chap.8
1315	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
1316	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
1317	solar_protection_on ) &
1318	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
1319	q_sol = phi_sol
1320	!
1321	!-- Calculation of the mass specific thermal load for internal and external heatsources of
1322	!-- the inner node.
1323	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with
1324	!< phi_ia=0,5*phi_int
1325	q_c_m = phi_m
1326	!
1327	!-- Calculation mass specific thermal load implied non thermal mass
1328	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
1329	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
1330	!< phi_ia=0,5*phi_int
1331	q_c_st = phi_st
1332	!
1333	!-- Calculations for deriving indoor temperature and heat flux into the wall
1334	!-- Step 1: indoor temperature without heating and cooling
1335	!-- section C.4.1 Picture C.2 zone 3)
1336	phi_hc_nd = 0.0_wp
1337
1338	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1339	near_facade_temperature, phi_hc_nd )
1340	!
1341	!-- If air temperature between border temperatures of heating and cooling, assign output
1342	!-- variable, then ready.
1343	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
1344	theta_air <= buildings(nb)%theta_int_c_set ) THEN
1345	phi_hc_nd_ac = 0.0_wp
1346	phi_hc_nd = phi_hc_nd_ac
1347	theta_air_ac = theta_air
1348	!
1349	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
1350	!-- again.
1351	ELSE
1352	!
1353	!-- Temperature not correct, calculation method according to section C4.2
1354	theta_air_0 = theta_air !< temperature without heating/cooling
1355	!
1356	!-- Heating or cooling?
1357	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
1358	theta_air_set = buildings(nb)%theta_int_c_set
1359	ELSE
1360	theta_air_set = buildings(nb)%theta_int_h_set
1361	ENDIF
1362	!
1363	!-- Calculate the temperature with phi_hc_nd_10
1364	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
1365	phi_hc_nd = phi_hc_nd_10
1366
1367	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1368	near_facade_temperature, phi_hc_nd )
1369	theta_air_10 = theta_air !< temperature with 10 W/m2 of heating
1370	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
1371	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
1372	!
1373	!-- Step 3: with temperature ratio to determine the heating or cooling capacity.
1374	!-- If necessary, limit the power to maximum power.
1375	!-- section C.4.1 Picture C.2 zone 2) and 4)
1376	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
1377	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
1378	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
1379	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
1380	phi_hc_nd_ac = phi_hc_nd_un
1381	phi_hc_nd = phi_hc_nd_un
1382	ELSE
1383	!
1384	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
1385	!-- (phi_hc_nd_un negative)
1386	!-- section C.4.1 Picture C.2 zone 1) and 5)
1387	IF ( phi_hc_nd_un > 0.0_wp ) THEN
1388	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
1389	ELSE
1390	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
1391	ENDIF
1392	ENDIF
1393	phi_hc_nd = phi_hc_nd_ac
1394	!
1395	!-- Calculate the temperature with phi_hc_nd_ac (new)
1396	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1397	near_facade_temperature, phi_hc_nd )
1398	theta_air_ac = theta_air
1399	ENDIF
1400	!
1401	!-- Update theta_m_t_prev
1402	theta_m_t_prev = theta_m_t
1403
1404	q_vent = h_v * ( theta_air - near_facade_temperature )
1405	!
1406	!-- Calculate the operating temperature with weighted mean temperature of air and mean
1407	!-- solar temperature.
1408	!-- Will be used for thermal comfort calculations.
1409	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
1410	! surf_usm_h(l)%t_indoor(m) = theta_op !< not integrated now
1411	!
1412	!-- Heat flux into the wall. Value needed in urban_surface_mod to
1413	!-- calculate heat transfer through wall layers towards the facade
1414	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
1415	q_wall_win = h_t_ms * ( theta_s - theta_m ) &
1416	/ ( facade_element_area - window_area_per_facade )
1417	q_trans = q_wall_win * facade_element_area
1418	!
1419	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
1420	surf_usm_h(l)%iwghf_eb(m) = q_wall_win
1421	surf_usm_h(l)%iwghf_eb_window(m) = q_wall_win
1422	!
1423	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
1424	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
1425	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
1426	!
1427	!-- Calculation of waste heat.
1428	!-- Anthropogenic heat output.
1429	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
1430	heating_on = 1
1431	cooling_on = 0
1432	ELSE
1433	heating_on = 0
1434	cooling_on = -1
1435	ENDIF
1436
1437	q_waste_heat = ( phi_hc_nd * ( &
1438	buildings(nb)%params_waste_heat_h * heating_on + &
1439	buildings(nb)%params_waste_heat_c * cooling_on ) &
1440	) / facade_element_area !< [W/m2] , observe the directional
1441	!< convention in PALM!
1442	surf_usm_h(l)%waste_heat(m) = q_waste_heat
1443	ENDDO !< Horizontal surfaces loop
1444	!
1445	!-- Vertical surfaces
1446	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
1447	!
1448	!-- Determine indices where corresponding surface-type information is stored.
1449	l = buildings(nb)%l_v(fa)
1450	m = buildings(nb)%m_v(fa)
1451	!
1452	!-- Determine building height level index.
1453	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
1454	!
1455	!-- (SOME OF THE FOLLOWING (not time-dependent) COULD PROBABLY GO INTO A FUNCTION
1456	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
1457	!-- Building geometries --> not time-dependent
1458	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk+1) !< [m2] surface area per facade element
1459	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk+1) !< [m2] surface area per facade element
1460
1461	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
1462	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
1463	buildings(nb)%area_facade = facade_element_area * &
1464	( buildings(nb)%num_facades_per_building_h + &
1465	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
1466	window_area_per_facade = surf_usm_v(l)%frac(m,ind_wat_win) * facade_element_area !< [m2] window area per
1467	!< facade element
1468
1469	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
1470	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
1471	!< pointing to zone Eq. (9) according to section 7.2.2.2
1472	a_m = buildings(nb)%factor_a * total_area * &
1473	( facade_element_area / buildings(nb)%area_facade ) * &
1474	buildings(nb)%lambda_at !< [m2] standard values
1475	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
1476	c_m = buildings(nb)%factor_c * total_area * &
1477	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
1478	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
1479	!
1480	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
1481	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
1482
1483	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
1484	!< (m2 K) between surface and air, Eq. (9)
1485	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
1486	!< (m2 K) between component and surface, Eq. (64)
1487	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
1488	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
1489	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
1490	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
1491	!
1492	!-- Internal air loads dependent on the occupacy of the room.
1493	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy
1494	!-- (qint_high) (0,5*phi_int)
1495	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
1496	* floor_area_per_facade )
1497	q_int = phi_ia
1498
1499	!
1500	!-- Airflow dependent on the occupacy of the room.
1501	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy
1502	!-- (air_change_high)
1503	air_change = ( buildings(nb)%air_change_high * schedule_d + &
1504	buildings(nb)%air_change_low )
1505	!
1506	!-- Heat transfer of ventilation.
1507	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
1508	!-- capacity of air 0.33 Wh/m2K
1509	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
1510	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789
1511	!< Eq.(10)
1512
1513	!-- Heat transfer coefficient auxiliary variables
1514	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
1515	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
1516	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
1517	!
1518	!-- Net short-wave radiation through window area (was i_global)
1519	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
1520	!
1521	!-- Quantities needed for im_calc_temperatures
1522	i = surf_usm_v(l)%i(m)
1523	j = surf_usm_v(l)%j(m)
1524	k = surf_usm_v(l)%k(m)
1525	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
1526	indoor_wall_window_temperature = &
1527	surf_usm_v(l)%frac(m,ind_veg_wall) * t_wall_v(l)%val(nzt_wall,m) &
1528	+ surf_usm_v(l)%frac(m,ind_wat_win) * t_window_v(l)%val(nzt_wall,m)
1529	!
1530	!-- Solar thermal gains. If net_sw_in larger than sun-protection
1531	!-- threshold parameter (params_solar_protection), sun protection will
1532	!-- be activated
1533	IF ( net_sw_in <= params_solar_protection ) THEN
1534	solar_protection_off = 1
1535	solar_protection_on = 0
1536	ELSE
1537	solar_protection_off = 0
1538	solar_protection_on = 1
1539	ENDIF
1540	!
1541	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
1542	!-- automatic sun protection.
1543	!-- DIN 4108 - 2 chap.8
1544	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
1545	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
1546	solar_protection_on ) &
1547	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
1548	q_sol = phi_sol
1549	!
1550	!-- Calculation of the mass specific thermal load for internal and external heatsources.
1551	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
1552	q_c_m = phi_m
1553	!
1554	!-- Calculation mass specific thermal load implied non thermal mass.
1555	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
1556	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
1557	!< phi_ia=0,5*phi_int
1558	q_c_st = phi_st
1559	!
1560	!-- Calculations for deriving indoor temperature and heat flux into the wall.
1561	!-- Step 1: indoor temperature without heating and cooling.
1562	!-- section C.4.1 Picture C.2 zone 3)
1563	phi_hc_nd = 0.0_wp
1564	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1565	near_facade_temperature, phi_hc_nd )
1566	!
1567	!-- If air temperature between border temperatures of heating and cooling, assign output
1568	!-- variable, then ready.
1569	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
1570	theta_air <= buildings(nb)%theta_int_c_set ) THEN
1571	phi_hc_nd_ac = 0.0_wp
1572	phi_hc_nd = phi_hc_nd_ac
1573	theta_air_ac = theta_air
1574	!
1575	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
1576	!-- again.
1577	ELSE
1578	!
1579	!-- Temperature not correct, calculation method according to section C4.2
1580	theta_air_0 = theta_air !< Note temperature without heating/cooling
1581	!
1582	!-- Heating or cooling?
1583	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
1584	theta_air_set = buildings(nb)%theta_int_c_set
1585	ELSE
1586	theta_air_set = buildings(nb)%theta_int_h_set
1587	ENDIF
1588
1589	!-- Calculate the temperature with phi_hc_nd_10
1590	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
1591	phi_hc_nd = phi_hc_nd_10
1592
1593	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1594	near_facade_temperature, phi_hc_nd )
1595
1596	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
1597
1598	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
1599	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
1600	!
1601	!-- Step 3: with temperature ratio to determine the heating or cooling capacity
1602	!-- If necessary, limit the power to maximum power.
1603	!-- section C.4.1 Picture C.2 zone 2) and 4)
1604	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
1605	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
1606	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
1607	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
1608	phi_hc_nd_ac = phi_hc_nd_un
1609	phi_hc_nd = phi_hc_nd_un
1610	ELSE
1611	!
1612	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
1613	!-- (phi_hc_nd_un negative)
1614	!-- section C.4.1 Picture C.2 zone 1) and 5)
1615	IF ( phi_hc_nd_un > 0.0_wp ) THEN
1616	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
1617	ELSE
1618	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
1619	ENDIF
1620	ENDIF
1621	phi_hc_nd = phi_hc_nd_ac
1622	!
1623	!-- Calculate the temperature with phi_hc_nd_ac (new)
1624	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
1625	near_facade_temperature, phi_hc_nd )
1626	theta_air_ac = theta_air
1627	ENDIF
1628	!
1629	!-- Update theta_m_t_prev
1630	theta_m_t_prev = theta_m_t
1631
1632	q_vent = h_v * ( theta_air - near_facade_temperature )
1633	!
1634	!-- Calculate the operating temperature with weighted mean of temperature of air and mean.
1635	!-- Will be used for thermal comfort calculations.
1636	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
1637	! surf_usm_v(l)%t_indoor(m) = theta_op !< not integrated yet
1638	!
1639	!-- Heat flux into the wall. Value needed in urban_surface_mod to
1640	!-- calculate heat transfer through wall layers towards the facade
1641	q_wall_win = h_t_ms * ( theta_s - theta_m ) &
1642	/ ( facade_element_area - window_area_per_facade )
1643	q_trans = q_wall_win * facade_element_area
1644	!
1645	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
1646	surf_usm_v(l)%iwghf_eb(m) = q_wall_win
1647	surf_usm_v(l)%iwghf_eb_window(m) = q_wall_win
1648	!
1649	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
1650	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
1651	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
1652	!
1653	!-- Calculation of waste heat.
1654	!-- Anthropogenic heat output.
1655	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
1656	heating_on = 1
1657	cooling_on = 0
1658	ELSE
1659	heating_on = 0
1660	cooling_on = -1
1661	ENDIF
1662
1663	q_waste_heat = ( phi_hc_nd * ( buildings(nb)%params_waste_heat_h * heating_on + &
1664	buildings(nb)%params_waste_heat_c * cooling_on ) &
1665	) / facade_element_area !< [W/m2] , observe the directional convention in
1666	!< PALM!
1667	surf_usm_v(l)%waste_heat(m) = q_waste_heat
1668	ENDDO !< Vertical surfaces loop
1669	ENDIF !< buildings(nb)%on_pe
1670	ENDDO !< buildings loop
1671
1672	!
1673	!-- Determine the mean building temperature.
1674	DO nb = 1, num_build
1675	!
1676	!-- Allocate dummy array used for summing-up facade elements.
1677	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
1678	!-- allocated on all PEs.
1679	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
1680	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
1681	t_in_l_send = 0.0_wp
1682	t_in_recv = 0.0_wp
1683
1684	IF ( buildings(nb)%on_pe ) THEN
1685	t_in_l_send = buildings(nb)%t_in_l
1686	ENDIF
1687
1688
1689	#if defined( __parallel )
1690	CALL MPI_ALLREDUCE( t_in_l_send, &
1691	t_in_recv, &
1692	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
1693	MPI_REAL, &
1694	MPI_SUM, &
1695	comm2d, &
1696	ierr )
1697
1698	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = t_in_recv
1699	#else
1700	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = buildings(nb)%t_in_l
1701	#endif
1702
1703	IF ( ALLOCATED( buildings(nb)%t_in ) ) THEN
1704	!
1705	!-- Average indoor temperature. Note, in case a building is completely surrounded by higher
1706	!-- buildings, it may have no facade elements at some height levels, which will lead to a
1707	!-- division by zero.
1708	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
1709	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) > 0 ) THEN
1710	buildings(nb)%t_in(k) = buildings(nb)%t_in(k) / &
1711	REAL( buildings(nb)%num_facade_h(k) + &
1712	buildings(nb)%num_facade_v(k), KIND = wp )
1713	ENDIF
1714	ENDDO
1715	!
1716	!-- If indoor temperature is not defined because of missing facade elements, the values from
1717	!-- the above-lying level will be taken.
1718	!-- At least at the top of the buildings facades are defined, so that at least there an indoor
1719	!-- temperature is defined. This information will propagate downwards the building.
1720	DO k = buildings(nb)%kb_max-1, buildings(nb)%kb_min, -1
1721	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) <= 0 ) THEN
1722	buildings(nb)%t_in(k) = buildings(nb)%t_in(k+1)
1723	ENDIF
1724	ENDDO
1725	ENDIF
1726
1727
1728	!
1729	!-- Deallocate dummy arrays
1730	DEALLOCATE( t_in_l_send )
1731	DEALLOCATE( t_in_recv )
1732
1733	ENDDO
1734
1735	END SUBROUTINE im_main_heatcool
1736
1737
1738	!--------------------------------------------------------------------------------------------------!
1739	! Description:
1740	!-------------
1741	!> Check data output for plant canopy model
1742	!--------------------------------------------------------------------------------------------------!
1743	SUBROUTINE im_check_data_output( var, unit )
1744
1745	CHARACTER (LEN=*) :: unit !<
1746	CHARACTER (LEN=*) :: var !<
1747
1748	SELECT CASE ( TRIM( var ) )
1749
1750
1751	CASE ( 'im_hf_roof')
1752	unit = 'W m-2'
1753
1754	CASE ( 'im_hf_wall_win' )
1755	unit = 'W m-2'
1756
1757	CASE ( 'im_hf_wall_win_waste' )
1758	unit = 'W m-2'
1759
1760	CASE ( 'im_hf_roof_waste' )
1761	unit = 'W m-2'
1762
1763	CASE ( 'im_t_indoor_mean' )
1764	unit = 'K'
1765
1766	CASE ( 'im_t_indoor_roof' )
1767	unit = 'K'
1768
1769	CASE ( 'im_t_indoor_wall_win' )
1770	unit = 'K'
1771
1772	CASE DEFAULT
1773	unit = 'illegal'
1774
1775	END SELECT
1776
1777	END SUBROUTINE
1778
1779
1780	!--------------------------------------------------------------------------------------------------!
1781	! Description:
1782	!-------------
1783	!> Check parameters routine for plant canopy model
1784	!--------------------------------------------------------------------------------------------------!
1785	SUBROUTINE im_check_parameters
1786
1787	! USE control_parameters,
1788	! ONLY: message_string
1789
1790	END SUBROUTINE im_check_parameters
1791
1792
1793	!--------------------------------------------------------------------------------------------------!
1794	! Description:
1795	!-------------
1796	!> Subroutine defining appropriate grid for netcdf variables.
1797	!> It is called from subroutine netcdf.
1798	!--------------------------------------------------------------------------------------------------!
1799	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
1800
1801	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
1802	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
1803	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
1804	CHARACTER (LEN=*), INTENT(IN) :: var
1805
1806	LOGICAL, INTENT(OUT) :: found
1807
1808
1809	found = .TRUE.
1810	!
1811	!-- Check for the grid
1812	SELECT CASE ( TRIM( var ) )
1813
1814	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
1815	grid_x = 'x'
1816	grid_y = 'y'
1817	grid_z = 'zw'
1818	!
1819	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
1820	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
1821	grid_x = 'x'
1822	grid_y = 'y'
1823	grid_z = 'zu'
1824
1825	CASE ( 'im_t_indoor_mean', 'im_t_indoor_roof', 'im_t_indoor_wall_win')
1826	grid_x = 'x'
1827	grid_y = 'y'
1828	grid_z = 'zw'
1829
1830	CASE DEFAULT
1831	found = .FALSE.
1832	grid_x = 'none'
1833	grid_y = 'none'
1834	grid_z = 'none'
1835	END SELECT
1836
1837	END SUBROUTINE im_define_netcdf_grid
1838
1839
1840	!--------------------------------------------------------------------------------------------------!
1841	! Description:
1842	! ------------
1843	!> Subroutine defining 3D output variables
1844	!--------------------------------------------------------------------------------------------------!
1845	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1846
1847	USE indices
1848
1849	USE kinds
1850
1851	CHARACTER (LEN=*) :: variable !<
1852
1853	INTEGER(iwp) :: av !<
1854	INTEGER(iwp) :: i !<
1855	INTEGER(iwp) :: j !<
1856	INTEGER(iwp) :: k !<
1857	INTEGER(iwp) :: l !<
1858	INTEGER(iwp) :: m !<
1859	INTEGER(iwp) :: nb !< index of the building in the building data structure
1860	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
1861	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
1862
1863	LOGICAL :: found !<
1864
1865	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
1866
1867	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
1868
1869	local_pf = fill_value
1870
1871	found = .TRUE.
1872
1873	SELECT CASE ( TRIM( variable ) )
1874	!
1875	!-- Output of indoor temperature. All grid points within the building are filled with values,
1876	!-- while atmospheric grid points are set to _FillValues.
1877	CASE ( 'im_t_indoor_mean' )
1878	IF ( av == 0 ) THEN
1879	DO i = nxl, nxr
1880	DO j = nys, nyn
1881	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
1882	!
1883	!-- Determine index of the building within the building data structure.
1884	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
1885	IF ( buildings(nb)%on_pe ) THEN
1886	!
1887	!-- Write mean building temperature onto output array. Please note, in
1888	!-- contrast to many other loops in the output, the vertical bounds are
1889	!-- determined by the lowest and hightest vertical index occupied by the
1890	!-- building.
1891	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
1892	local_pf(i,j,k) = buildings(nb)%t_in(k)
1893	ENDDO
1894	ENDIF
1895	ENDIF
1896	ENDDO
1897	ENDDO
1898	ENDIF
1899
1900	CASE ( 'im_hf_roof' )
1901	IF ( av == 0 ) THEN
1902	DO m = 1, surf_usm_h(0)%ns
1903	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
1904	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
1905	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
1906	local_pf(i,j,k) = surf_usm_h(0)%iwghf_eb(m)
1907	ENDDO
1908	ENDIF
1909
1910	CASE ( 'im_hf_roof_waste' )
1911	IF ( av == 0 ) THEN
1912	DO m = 1, surf_usm_h(0)%ns
1913	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
1914	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
1915	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
1916	local_pf(i,j,k) = surf_usm_h(0)%waste_heat(m)
1917	ENDDO
1918	ENDIF
1919
1920	CASE ( 'im_hf_wall_win' )
1921	IF ( av == 0 ) THEN
1922	DO l = 0, 3
1923	DO m = 1, surf_usm_v(l)%ns
1924	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
1925	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
1926	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
1927	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
1928	ENDDO
1929	ENDDO
1930	ENDIF
1931
1932	CASE ( 'im_hf_wall_win_waste' )
1933	IF ( av == 0 ) THEN
1934	DO l = 0, 3
1935	DO m = 1, surf_usm_v(l)%ns
1936	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
1937	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
1938	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
1939	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
1940	ENDDO
1941	ENDDO
1942	ENDIF
1943
1944	!
1945	!< NOTE im_t_indoor_roof and im_t_indoor_wall_win not work yet
1946
1947	! CASE ( 'im_t_indoor_roof' )
1948	! IF ( av == 0 ) THEN
1949	! DO m = 1, surf_usm_h%ns
1950	! i = surf_usm_h%i(m) !+ surf_usm_h%ioff
1951	! j = surf_usm_h%j(m) !+ surf_usm_h%joff
1952	! k = surf_usm_h%k(m) !+ surf_usm_h%koff
1953	! local_pf(i,j,k) = surf_usm_h%t_indoor(m)
1954	! ENDDO
1955	! ENDIF
1956	!
1957	! CASE ( 'im_t_indoor_wall_win' )
1958	! IF ( av == 0 ) THEN
1959	! DO l = 0, 3
1960	! DO m = 1, surf_usm_v(l)%ns
1961	! i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
1962	! j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
1963	! k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
1964	! local_pf(i,j,k) = surf_usm_v(l)%t_indoor(m)
1965	! ENDDO
1966	! ENDDO
1967	! ENDIF
1968
1969	CASE DEFAULT
1970	found = .FALSE.
1971
1972	END SELECT
1973
1974	END SUBROUTINE im_data_output_3d
1975
1976
1977	!--------------------------------------------------------------------------------------------------!
1978	! Description:
1979	! ------------
1980	!> Parin for &indoor_parameters for indoor model
1981	!--------------------------------------------------------------------------------------------------!
1982	SUBROUTINE im_parin
1983
1984	USE control_parameters, &
1985	ONLY: indoor_model
1986
1987
1988	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
1989
1990	NAMELIST /indoor_parameters/ initial_indoor_temperature
1991
1992
1993	!
1994	!-- Try to find indoor model package
1995	REWIND ( 11 )
1996	line = ' '
1997	DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 )
1998	READ ( 11, '(A)', END=10 ) line
1999	ENDDO
2000	BACKSPACE ( 11 )
2001
2002	!
2003	!-- Read user-defined namelist
2004	READ ( 11, indoor_parameters )
2005	!
2006	!-- Set flag that indicates that the indoor model is switched on
2007	indoor_model = .TRUE.
2008
2009	!
2010	!-- Activate spinup (maybe later
2011	! IF ( spinup_time > 0.0_wp ) THEN
2012	! coupling_start_time = spinup_time
2013	! end_time = end_time + spinup_time
2014	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
2015	! spinup_pt_mean = pt_surface
2016	! ENDIF
2017	! spinup = .TRUE.
2018	! ENDIF
2019
2020	10 CONTINUE
2021
2022	END SUBROUTINE im_parin
2023
2024
2025	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |