Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 961

Last change on this file since 961 was 941, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 80.1 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 941 2012-07-09 14:50:21Z hoffmann $
11	!
12	! 940 2012-07-09 14:31:00Z raasch
13	! Output in case of simulations for pure neutral stratification (no pt-equation
14	! solved)
15	!
16	! 927 2012-06-06 19:15:04Z raasch
17	! output of masking_method for mg-solver
18	!
19	! 868 2012-03-28 12:21:07Z raasch
20	! translation velocity in Galilean transformation changed to 0.6 * ug
21	!
22	! 833 2012-02-22 08:55:55Z maronga
23	! Adjusted format for leaf area density
24	!
25	! 828 2012-02-21 12:00:36Z raasch
26	! output of dissipation_classes + radius_classes
27	!
28	! 825 2012-02-19 03:03:44Z raasch
29	! Output of cloud physics parameters/quantities complemented and restructured
30	!
31	! 767 2011-10-14 06:39:12Z raasch
32	! Output of given initial u,v-profiles
33	!
34	! 759 2011-09-15 13:58:31Z raasch
35	! output of maximum number of parallel io streams
36	!
37	! 707 2011-03-29 11:39:40Z raasch
38	! bc_lr/ns replaced by bc_lr/ns_cyc
39	!
40	! 667 2010-12-23 12:06:00Z suehring/gryschka
41	! Output of advection scheme.
42	! Modified output of Prandtl-layer height.
43	!
44	! 580 2010-10-05 13:59:11Z heinze
45	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
46	! ws_vertical_gradient_level to subs_vertical_gradient_level and
47	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
48	!
49	! 493 2010-03-01 08:30:24Z raasch
50	! NetCDF data output format extendend for NetCDF4/HDF5
51	!
52	! 449 2010-02-02 11:23:59Z raasch
53	! +large scale vertical motion (subsidence/ascent)
54	! Bugfix: index problem concerning gradient_level indices removed
55	!
56	! 410 2009-12-04 17:05:40Z letzel
57	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
58	! mask_scale\|_x\|y\|z, masks, skip_time_domask
59	!
60	! 346 2009-07-06 10:13:41Z raasch
61	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
62	! Coupling with independent precursor runs.
63	! Output of messages replaced by message handling routine.
64	! Output of several additional dvr parameters
65	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
66	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
67	! dp_smooth, dpdxy, u_bulk, v_bulk
68	! topography_grid_convention moved from user_header
69	! small bugfix concerning 3d 64bit netcdf output format
70	!
71	! 206 2008-10-13 14:59:11Z raasch
72	! Bugfix: error in zu index in case of section_xy = -1
73	!
74	! 198 2008-09-17 08:55:28Z raasch
75	! Format adjustments allowing output of larger revision numbers
76	!
77	! 197 2008-09-16 15:29:03Z raasch
78	! allow 100 spectra levels instead of 10 for consistency with
79	! define_netcdf_header,
80	! bugfix in the output of the characteristic levels of potential temperature,
81	! geostrophic wind, scalar concentration, humidity and leaf area density,
82	! output of turbulence recycling informations
83	!
84	! 138 2007-11-28 10:03:58Z letzel
85	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
86	! Allow two instead of one digit to specify isosurface and slicer variables.
87	! Output of sorting frequency of particles
88	!
89	! 108 2007-08-24 15:10:38Z letzel
90	! Output of informations for coupled model runs (boundary conditions etc.)
91	! + output of momentumfluxes at the top boundary
92	! Rayleigh damping for ocean, e_init
93	!
94	! 97 2007-06-21 08:23:15Z raasch
95	! Adjustments for the ocean version.
96	! use_pt_reference renamed use_reference
97	!
98	! 87 2007-05-22 15:46:47Z raasch
99	! Bugfix: output of use_upstream_for_tke
100	!
101	! 82 2007-04-16 15:40:52Z raasch
102	! Preprocessor strings for different linux clusters changed to "lc",
103	! routine local_flush is used for buffer flushing
104	!
105	! 76 2007-03-29 00:58:32Z raasch
106	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
107	! output of the loop optimization method, moisture renamed humidity,
108	! output of subversion revision number
109	!
110	! 19 2007-02-23 04:53:48Z raasch
111	! Output of scalar flux applied at top boundary
112	!
113	! RCS Log replace by Id keyword, revision history cleaned up
114	!
115	! Revision 1.63 2006/08/22 13:53:13 raasch
116	! Output of dz_max
117	!
118	! Revision 1.1 1997/08/11 06:17:20 raasch
119	! Initial revision
120	!
121	!
122	! Description:
123	! ------------
124	! Writing a header with all important informations about the actual run.
125	! This subroutine is called three times, two times at the beginning
126	! (writing information on files RUN_CONTROL and HEADER) and one time at the
127	! end of the run, then writing additional information about CPU-usage on file
128	! header.
129	!-----------------------------------------------------------------------------!
130
131	USE arrays_3d
132	USE control_parameters
133	USE cloud_parameters
134	USE cpulog
135	USE dvrp_variables
136	USE grid_variables
137	USE indices
138	USE model_1d
139	USE particle_attributes
140	USE pegrid
141	USE subsidence_mod
142	USE spectrum
143
144	IMPLICIT NONE
145
146	CHARACTER (LEN=1) :: prec
147	CHARACTER (LEN=2) :: do2d_mode
148	CHARACTER (LEN=5) :: section_chr
149	CHARACTER (LEN=9) :: time_to_string
150	CHARACTER (LEN=10) :: coor_chr, host_chr
151	CHARACTER (LEN=16) :: begin_chr
152	CHARACTER (LEN=23) :: ver_rev
153	CHARACTER (LEN=40) :: output_format
154	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
155	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
156	domask_chr, run_classification
157	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
158	temperatures, ugcomponent, vgcomponent
159	CHARACTER (LEN=85) :: roben, runten
160
161	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
162
163	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
164	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
165	REAL :: cpuseconds_per_simulated_second
166
167	!
168	!-- Open the output file. At the end of the simulation, output is directed
169	!-- to unit 19.
170	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
171	.NOT. simulated_time_at_begin /= simulated_time ) THEN
172	io = 15 ! header output on file RUN_CONTROL
173	ELSE
174	io = 19 ! header output on file HEADER
175	ENDIF
176	CALL check_open( io )
177
178	!
179	!-- At the end of the run, output file (HEADER) will be rewritten with
180	!-- new informations
181	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
182
183	!
184	!-- Determine kind of model run
185	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
186	run_classification = '3D - restart run'
187	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
188	run_classification = '3D - run with cyclic fill of 3D - prerun data'
189	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
190	run_classification = '3D - run without 1D - prerun'
191	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
192	run_classification = '3D - run with 1D - prerun'
193	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
194	run_classification = '3D - run initialized by user'
195	ELSE
196	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
197	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
198	ENDIF
199	IF ( ocean ) THEN
200	run_classification = 'ocean - ' // run_classification
201	ELSE
202	run_classification = 'atmosphere - ' // run_classification
203	ENDIF
204
205	!
206	!-- Run-identification, date, time, host
207	host_chr = host(1:10)
208	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
209	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
210	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
211	#if defined( __mpi2 )
212	mpi_type = 2
213	#else
214	mpi_type = 1
215	#endif
216	WRITE ( io, 101 ) mpi_type, coupling_mode
217	ENDIF
218	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
219	ADJUSTR( host_chr )
220	#if defined( __parallel )
221	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
222	char1 = 'calculated'
223	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
224	host(1:2) == 'lc' ) .AND. &
225	npex == -1 .AND. pdims(2) == 1 ) THEN
226	char1 = 'forced'
227	ELSE
228	char1 = 'predefined'
229	ENDIF
230	IF ( threads_per_task == 1 ) THEN
231	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
232	ELSE
233	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
234	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
235	ENDIF
236	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
237	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
238	npex == -1 .AND. pdims(2) == 1 ) &
239	THEN
240	WRITE ( io, 106 )
241	ELSEIF ( pdims(2) == 1 ) THEN
242	WRITE ( io, 107 ) 'x'
243	ELSEIF ( pdims(1) == 1 ) THEN
244	WRITE ( io, 107 ) 'y'
245	ENDIF
246	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
247	IF ( numprocs /= maximum_parallel_io_streams ) THEN
248	WRITE ( io, 108 ) maximum_parallel_io_streams
249	ENDIF
250	#endif
251	WRITE ( io, 99 )
252
253	!
254	!-- Numerical schemes
255	WRITE ( io, 110 )
256	IF ( psolver(1:7) == 'poisfft' ) THEN
257	WRITE ( io, 111 ) TRIM( fft_method )
258	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
259	ELSEIF ( psolver == 'sor' ) THEN
260	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
261	ELSEIF ( psolver == 'multigrid' ) THEN
262	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
263	IF ( mg_cycles == -1 ) THEN
264	WRITE ( io, 140 ) residual_limit
265	ELSE
266	WRITE ( io, 141 ) mg_cycles
267	ENDIF
268	IF ( mg_switch_to_pe0_level == 0 ) THEN
269	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
270	nzt_mg(1)
271	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
272	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
273	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
274	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
275	nzt_mg(mg_switch_to_pe0_level), &
276	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
277	nzt_mg(1)
278	ENDIF
279	IF ( masking_method ) WRITE ( io, 144 )
280	ENDIF
281	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
282	THEN
283	WRITE ( io, 142 )
284	ENDIF
285
286	IF ( momentum_advec == 'pw-scheme' ) THEN
287	WRITE ( io, 113 )
288	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
289	WRITE ( io, 503 )
290	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
291	WRITE ( io, 114 )
292	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
293	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
294	overshoot_limit_w /= 0.0 ) THEN
295	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
296	overshoot_limit_w
297	ENDIF
298	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
299	ups_limit_w /= 0.0 ) &
300	THEN
301	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
302	ENDIF
303	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
304	ENDIF
305	IF ( scalar_advec == 'pw-scheme' ) THEN
306	WRITE ( io, 116 )
307	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
308	WRITE ( io, 504 )
309	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
310	WRITE ( io, 117 )
311	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
312	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
313	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
314	ENDIF
315	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
316	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
317	ENDIF
318	ELSE
319	WRITE ( io, 118 )
320	ENDIF
321
322	WRITE ( io, 139 ) TRIM( loop_optimization )
323
324	IF ( galilei_transformation ) THEN
325	IF ( use_ug_for_galilei_tr ) THEN
326	char1 = '0.6 * geostrophic wind'
327	ELSE
328	char1 = 'mean wind in model domain'
329	ENDIF
330	IF ( simulated_time_at_begin == simulated_time ) THEN
331	char2 = 'at the start of the run'
332	ELSE
333	char2 = 'at the end of the run'
334	ENDIF
335	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
336	advected_distance_x/1000.0, advected_distance_y/1000.0
337	ENDIF
338	IF ( timestep_scheme == 'leapfrog' ) THEN
339	WRITE ( io, 120 )
340	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
341	WRITE ( io, 121 )
342	ELSE
343	WRITE ( io, 122 ) timestep_scheme
344	ENDIF
345	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
346	IF ( rayleigh_damping_factor /= 0.0 ) THEN
347	IF ( .NOT. ocean ) THEN
348	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
349	rayleigh_damping_factor
350	ELSE
351	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
352	rayleigh_damping_factor
353	ENDIF
354	ENDIF
355	IF ( neutral ) WRITE ( io, 131 ) pt_surface
356	IF ( humidity ) THEN
357	IF ( .NOT. cloud_physics ) THEN
358	WRITE ( io, 129 )
359	ELSE
360	WRITE ( io, 130 )
361	ENDIF
362	ENDIF
363	IF ( passive_scalar ) WRITE ( io, 134 )
364	IF ( conserve_volume_flow ) THEN
365	WRITE ( io, 150 ) conserve_volume_flow_mode
366	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
367	WRITE ( io, 151 ) u_bulk, v_bulk
368	ENDIF
369	ELSEIF ( dp_external ) THEN
370	IF ( dp_smooth ) THEN
371	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
372	ELSE
373	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
374	ENDIF
375	ENDIF
376	IF ( large_scale_subsidence ) THEN
377	WRITE ( io, 153 )
378	WRITE ( io, 154 )
379	ENDIF
380	WRITE ( io, 99 )
381
382	!
383	!-- Runtime and timestep informations
384	WRITE ( io, 200 )
385	IF ( .NOT. dt_fixed ) THEN
386	WRITE ( io, 201 ) dt_max, cfl_factor
387	ELSE
388	WRITE ( io, 202 ) dt
389	ENDIF
390	WRITE ( io, 203 ) simulated_time_at_begin, end_time
391
392	IF ( time_restart /= 9999999.9 .AND. &
393	simulated_time_at_begin == simulated_time ) THEN
394	IF ( dt_restart == 9999999.9 ) THEN
395	WRITE ( io, 204 ) ' Restart at: ',time_restart
396	ELSE
397	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
398	ENDIF
399	ENDIF
400
401	IF ( simulated_time_at_begin /= simulated_time ) THEN
402	i = MAX ( log_point_s(10)%counts, 1 )
403	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
404	cpuseconds_per_simulated_second = 0.0
405	ELSE
406	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
407	( simulated_time - &
408	simulated_time_at_begin )
409	ENDIF
410	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
411	log_point_s(10)%sum / REAL( i ), &
412	cpuseconds_per_simulated_second
413	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
414	IF ( dt_restart == 9999999.9 ) THEN
415	WRITE ( io, 204 ) ' Next restart at: ',time_restart
416	ELSE
417	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
418	ENDIF
419	ENDIF
420	ENDIF
421
422	!
423	!-- Start time for coupled runs, if independent precursor runs for atmosphere
424	!-- and ocean are used. In this case, coupling_start_time defines the time
425	!-- when the coupling is switched on.
426	IF ( coupling_start_time /= 0.0 ) THEN
427	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
428	char1 = 'Precursor run for a coupled atmosphere-ocean run'
429	ELSE
430	char1 = 'Coupled atmosphere-ocean run following independent ' // &
431	'precursor runs'
432	ENDIF
433	WRITE ( io, 207 ) char1, coupling_start_time
434	ENDIF
435
436	!
437	!-- Computational grid
438	IF ( .NOT. ocean ) THEN
439	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
440	IF ( dz_stretch_level_index < nzt+1 ) THEN
441	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
442	dz_stretch_factor, dz_max
443	ENDIF
444	ELSE
445	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
446	IF ( dz_stretch_level_index > 0 ) THEN
447	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
448	dz_stretch_factor, dz_max
449	ENDIF
450	ENDIF
451	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
452	MIN( nnz+2, nzt+2 )
453	IF ( numprocs > 1 ) THEN
454	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
455	WRITE ( io, 255 )
456	ELSE
457	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
458	ENDIF
459	ENDIF
460	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
461
462	!
463	!-- Topography
464	WRITE ( io, 270 ) topography
465	SELECT CASE ( TRIM( topography ) )
466
467	CASE ( 'flat' )
468	! no actions necessary
469
470	CASE ( 'single_building' )
471	blx = INT( building_length_x / dx )
472	bly = INT( building_length_y / dy )
473	bh = INT( building_height / dz )
474
475	IF ( building_wall_left == 9999999.9 ) THEN
476	building_wall_left = ( nx + 1 - blx ) / 2 * dx
477	ENDIF
478	bxl = INT ( building_wall_left / dx + 0.5 )
479	bxr = bxl + blx
480
481	IF ( building_wall_south == 9999999.9 ) THEN
482	building_wall_south = ( ny + 1 - bly ) / 2 * dy
483	ENDIF
484	bys = INT ( building_wall_south / dy + 0.5 )
485	byn = bys + bly
486
487	WRITE ( io, 271 ) building_length_x, building_length_y, &
488	building_height, bxl, bxr, bys, byn
489
490	CASE ( 'single_street_canyon' )
491	ch = NINT( canyon_height / dz )
492	IF ( canyon_width_x /= 9999999.9 ) THEN
493	!
494	!-- Street canyon in y direction
495	cwx = NINT( canyon_width_x / dx )
496	IF ( canyon_wall_left == 9999999.9 ) THEN
497	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
498	ENDIF
499	cxl = NINT( canyon_wall_left / dx )
500	cxr = cxl + cwx
501	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
502
503	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
504	!
505	!-- Street canyon in x direction
506	cwy = NINT( canyon_width_y / dy )
507	IF ( canyon_wall_south == 9999999.9 ) THEN
508	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
509	ENDIF
510	cys = NINT( canyon_wall_south / dy )
511	cyn = cys + cwy
512	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
513	ENDIF
514
515	END SELECT
516
517	IF ( TRIM( topography ) /= 'flat' ) THEN
518	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
519	IF ( TRIM( topography ) == 'single_building' .OR. &
520	TRIM( topography ) == 'single_street_canyon' ) THEN
521	WRITE ( io, 278 )
522	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
523	WRITE ( io, 279 )
524	ENDIF
525	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
526	WRITE ( io, 278 )
527	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
528	WRITE ( io, 279 )
529	ENDIF
530	ENDIF
531
532	IF ( plant_canopy ) THEN
533
534	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
535	IF ( passive_scalar ) THEN
536	WRITE ( io, 281 ) scalar_exchange_coefficient, &
537	leaf_surface_concentration
538	ENDIF
539
540	!
541	!-- Heat flux at the top of vegetation
542	WRITE ( io, 282 ) cthf
543
544	!
545	!-- Leaf area density profile
546	!-- Building output strings, starting with surface value
547	WRITE ( learde, '(F6.4)' ) lad_surface
548	gradients = '------'
549	slices = ' 0'
550	coordinates = ' 0.0'
551	i = 1
552	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
553
554	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
555	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
556
557	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
558	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
559
560	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
561	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
562
563	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
564	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
565
566	i = i + 1
567	ENDDO
568
569	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
570	TRIM( gradients ), TRIM( slices )
571
572	ENDIF
573
574	!
575	!-- Boundary conditions
576	IF ( ibc_p_b == 0 ) THEN
577	runten = 'p(0) = 0 \|'
578	ELSEIF ( ibc_p_b == 1 ) THEN
579	runten = 'p(0) = p(1) \|'
580	ELSE
581	runten = 'p(0) = p(1) +R\|'
582	ENDIF
583	IF ( ibc_p_t == 0 ) THEN
584	roben = 'p(nzt+1) = 0 \|'
585	ELSE
586	roben = 'p(nzt+1) = p(nzt) \|'
587	ENDIF
588
589	IF ( ibc_uv_b == 0 ) THEN
590	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
591	ELSE
592	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
593	ENDIF
594	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
595	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
596	ELSEIF ( ibc_uv_t == 0 ) THEN
597	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
598	ELSE
599	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
600	ENDIF
601
602	IF ( ibc_pt_b == 0 ) THEN
603	runten = TRIM( runten ) // ' pt(0) = pt_surface'
604	ELSEIF ( ibc_pt_b == 1 ) THEN
605	runten = TRIM( runten ) // ' pt(0) = pt(1)'
606	ELSEIF ( ibc_pt_b == 2 ) THEN
607	runten = TRIM( runten ) // ' pt(0) = from coupled model'
608	ENDIF
609	IF ( ibc_pt_t == 0 ) THEN
610	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
611	ELSEIF( ibc_pt_t == 1 ) THEN
612	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
613	ELSEIF( ibc_pt_t == 2 ) THEN
614	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
615
616	ENDIF
617
618	WRITE ( io, 300 ) runten, roben
619
620	IF ( .NOT. constant_diffusion ) THEN
621	IF ( ibc_e_b == 1 ) THEN
622	runten = 'e(0) = e(1)'
623	ELSE
624	runten = 'e(0) = e(1) = (u/0.1)*2'
625	ENDIF
626	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
627
628	WRITE ( io, 301 ) 'e', runten, roben
629
630	ENDIF
631
632	IF ( ocean ) THEN
633	runten = 'sa(0) = sa(1)'
634	IF ( ibc_sa_t == 0 ) THEN
635	roben = 'sa(nzt+1) = sa_surface'
636	ELSE
637	roben = 'sa(nzt+1) = sa(nzt)'
638	ENDIF
639	WRITE ( io, 301 ) 'sa', runten, roben
640	ENDIF
641
642	IF ( humidity ) THEN
643	IF ( ibc_q_b == 0 ) THEN
644	runten = 'q(0) = q_surface'
645	ELSE
646	runten = 'q(0) = q(1)'
647	ENDIF
648	IF ( ibc_q_t == 0 ) THEN
649	roben = 'q(nzt) = q_top'
650	ELSE
651	roben = 'q(nzt) = q(nzt-1) + dq/dz'
652	ENDIF
653	WRITE ( io, 301 ) 'q', runten, roben
654	ENDIF
655
656	IF ( passive_scalar ) THEN
657	IF ( ibc_q_b == 0 ) THEN
658	runten = 's(0) = s_surface'
659	ELSE
660	runten = 's(0) = s(1)'
661	ENDIF
662	IF ( ibc_q_t == 0 ) THEN
663	roben = 's(nzt) = s_top'
664	ELSE
665	roben = 's(nzt) = s(nzt-1) + ds/dz'
666	ENDIF
667	WRITE ( io, 301 ) 's', runten, roben
668	ENDIF
669
670	IF ( use_surface_fluxes ) THEN
671	WRITE ( io, 303 )
672	IF ( constant_heatflux ) THEN
673	WRITE ( io, 306 ) surface_heatflux
674	IF ( random_heatflux ) WRITE ( io, 307 )
675	ENDIF
676	IF ( humidity .AND. constant_waterflux ) THEN
677	WRITE ( io, 311 ) surface_waterflux
678	ENDIF
679	IF ( passive_scalar .AND. constant_waterflux ) THEN
680	WRITE ( io, 313 ) surface_waterflux
681	ENDIF
682	ENDIF
683
684	IF ( use_top_fluxes ) THEN
685	WRITE ( io, 304 )
686	IF ( coupling_mode == 'uncoupled' ) THEN
687	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
688	IF ( constant_top_heatflux ) THEN
689	WRITE ( io, 306 ) top_heatflux
690	ENDIF
691	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
692	WRITE ( io, 316 )
693	ENDIF
694	IF ( ocean .AND. constant_top_salinityflux ) THEN
695	WRITE ( io, 309 ) top_salinityflux
696	ENDIF
697	IF ( humidity .OR. passive_scalar ) THEN
698	WRITE ( io, 315 )
699	ENDIF
700	ENDIF
701
702	IF ( prandtl_layer ) THEN
703	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
704	rif_min, rif_max
705	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
706	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
707	WRITE ( io, 312 )
708	ENDIF
709	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
710	WRITE ( io, 314 )
711	ENDIF
712	ELSE
713	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
714	WRITE ( io, 310 ) rif_min, rif_max
715	ENDIF
716	ENDIF
717
718	WRITE ( io, 317 ) bc_lr, bc_ns
719	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
720	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
721	IF ( turbulent_inflow ) THEN
722	WRITE ( io, 319 ) recycling_width, recycling_plane, &
723	inflow_damping_height, inflow_damping_width
724	ENDIF
725	ENDIF
726
727	!
728	!-- Listing of 1D-profiles
729	WRITE ( io, 325 ) dt_dopr_listing
730	IF ( averaging_interval_pr /= 0.0 ) THEN
731	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
732	ENDIF
733
734	!
735	!-- DATA output
736	WRITE ( io, 330 )
737	IF ( averaging_interval_pr /= 0.0 ) THEN
738	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
739	ENDIF
740
741	!
742	!-- 1D-profiles
743	dopr_chr = 'Profile:'
744	IF ( dopr_n /= 0 ) THEN
745	WRITE ( io, 331 )
746
747	output_format = ''
748	IF ( netcdf_output ) THEN
749	IF ( netcdf_data_format == 1 ) THEN
750	output_format = 'NetCDF classic'
751	ELSE
752	output_format = 'NetCDF 64bit offset'
753	ENDIF
754	ENDIF
755	IF ( profil_output ) THEN
756	IF ( netcdf_output ) THEN
757	output_format = TRIM( output_format ) // ' and profil'
758	ELSE
759	output_format = 'profil'
760	ENDIF
761	ENDIF
762	WRITE ( io, 344 ) output_format
763
764	DO i = 1, dopr_n
765	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
766	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
767	WRITE ( io, 332 ) dopr_chr
768	dopr_chr = ' :'
769	ENDIF
770	ENDDO
771
772	IF ( dopr_chr /= '' ) THEN
773	WRITE ( io, 332 ) dopr_chr
774	ENDIF
775	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
776	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
777	ENDIF
778
779	!
780	!-- 2D-arrays
781	DO av = 0, 1
782
783	i = 1
784	do2d_xy = ''
785	do2d_xz = ''
786	do2d_yz = ''
787	DO WHILE ( do2d(av,i) /= ' ' )
788
789	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
790	do2d_mode = do2d(av,i)(l-1:l)
791
792	SELECT CASE ( do2d_mode )
793	CASE ( 'xy' )
794	ll = LEN_TRIM( do2d_xy )
795	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
796	CASE ( 'xz' )
797	ll = LEN_TRIM( do2d_xz )
798	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
799	CASE ( 'yz' )
800	ll = LEN_TRIM( do2d_yz )
801	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
802	END SELECT
803
804	i = i + 1
805
806	ENDDO
807
808	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
809	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
810	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
811	( netcdf_output .OR. iso2d_output ) ) THEN
812
813	IF ( av == 0 ) THEN
814	WRITE ( io, 334 ) ''
815	ELSE
816	WRITE ( io, 334 ) '(time-averaged)'
817	ENDIF
818
819	IF ( do2d_at_begin ) THEN
820	begin_chr = 'and at the start'
821	ELSE
822	begin_chr = ''
823	ENDIF
824
825	output_format = ''
826	IF ( netcdf_output ) THEN
827	IF ( netcdf_data_format == 1 ) THEN
828	output_format = 'NetCDF classic'
829	ELSEIF ( netcdf_data_format == 2 ) THEN
830	output_format = 'NetCDF 64bit offset'
831	ELSEIF ( netcdf_data_format == 3 ) THEN
832	output_format = 'NetCDF4/HDF5'
833	ELSEIF ( netcdf_data_format == 4 ) THEN
834	output_format = 'NetCDF4/HDF5 clasic'
835	ENDIF
836	ENDIF
837	IF ( iso2d_output ) THEN
838	IF ( netcdf_output ) THEN
839	output_format = TRIM( output_format ) // ' and iso2d'
840	ELSE
841	output_format = 'iso2d'
842	ENDIF
843	ENDIF
844	WRITE ( io, 344 ) output_format
845
846	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
847	i = 1
848	slices = '/'
849	coordinates = '/'
850	!
851	!-- Building strings with index and coordinate informations of the
852	!-- slices
853	DO WHILE ( section(i,1) /= -9999 )
854
855	WRITE (section_chr,'(I5)') section(i,1)
856	section_chr = ADJUSTL( section_chr )
857	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
858
859	IF ( section(i,1) == -1 ) THEN
860	WRITE (coor_chr,'(F10.1)') -1.0
861	ELSE
862	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
863	ENDIF
864	coor_chr = ADJUSTL( coor_chr )
865	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
866
867	i = i + 1
868	ENDDO
869	IF ( av == 0 ) THEN
870	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
871	TRIM( begin_chr ), 'k', TRIM( slices ), &
872	TRIM( coordinates )
873	IF ( skip_time_do2d_xy /= 0.0 ) THEN
874	WRITE ( io, 339 ) skip_time_do2d_xy
875	ENDIF
876	ELSE
877	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
878	TRIM( begin_chr ), averaging_interval, &
879	dt_averaging_input, 'k', TRIM( slices ), &
880	TRIM( coordinates )
881	IF ( skip_time_data_output_av /= 0.0 ) THEN
882	WRITE ( io, 339 ) skip_time_data_output_av
883	ENDIF
884	ENDIF
885
886	ENDIF
887
888	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
889	i = 1
890	slices = '/'
891	coordinates = '/'
892	!
893	!-- Building strings with index and coordinate informations of the
894	!-- slices
895	DO WHILE ( section(i,2) /= -9999 )
896
897	WRITE (section_chr,'(I5)') section(i,2)
898	section_chr = ADJUSTL( section_chr )
899	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
900
901	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
902	coor_chr = ADJUSTL( coor_chr )
903	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
904
905	i = i + 1
906	ENDDO
907	IF ( av == 0 ) THEN
908	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
909	TRIM( begin_chr ), 'j', TRIM( slices ), &
910	TRIM( coordinates )
911	IF ( skip_time_do2d_xz /= 0.0 ) THEN
912	WRITE ( io, 339 ) skip_time_do2d_xz
913	ENDIF
914	ELSE
915	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
916	TRIM( begin_chr ), averaging_interval, &
917	dt_averaging_input, 'j', TRIM( slices ), &
918	TRIM( coordinates )
919	IF ( skip_time_data_output_av /= 0.0 ) THEN
920	WRITE ( io, 339 ) skip_time_data_output_av
921	ENDIF
922	ENDIF
923	ENDIF
924
925	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
926	i = 1
927	slices = '/'
928	coordinates = '/'
929	!
930	!-- Building strings with index and coordinate informations of the
931	!-- slices
932	DO WHILE ( section(i,3) /= -9999 )
933
934	WRITE (section_chr,'(I5)') section(i,3)
935	section_chr = ADJUSTL( section_chr )
936	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
937
938	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
939	coor_chr = ADJUSTL( coor_chr )
940	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
941
942	i = i + 1
943	ENDDO
944	IF ( av == 0 ) THEN
945	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
946	TRIM( begin_chr ), 'i', TRIM( slices ), &
947	TRIM( coordinates )
948	IF ( skip_time_do2d_yz /= 0.0 ) THEN
949	WRITE ( io, 339 ) skip_time_do2d_yz
950	ENDIF
951	ELSE
952	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
953	TRIM( begin_chr ), averaging_interval, &
954	dt_averaging_input, 'i', TRIM( slices ), &
955	TRIM( coordinates )
956	IF ( skip_time_data_output_av /= 0.0 ) THEN
957	WRITE ( io, 339 ) skip_time_data_output_av
958	ENDIF
959	ENDIF
960	ENDIF
961
962	ENDIF
963
964	ENDDO
965
966	!
967	!-- 3d-arrays
968	DO av = 0, 1
969
970	i = 1
971	do3d_chr = ''
972	DO WHILE ( do3d(av,i) /= ' ' )
973
974	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
975	i = i + 1
976
977	ENDDO
978
979	IF ( do3d_chr /= '' ) THEN
980	IF ( av == 0 ) THEN
981	WRITE ( io, 336 ) ''
982	ELSE
983	WRITE ( io, 336 ) '(time-averaged)'
984	ENDIF
985
986	output_format = ''
987	IF ( netcdf_output ) THEN
988	IF ( netcdf_data_format == 1 ) THEN
989	output_format = 'NetCDF classic'
990	ELSEIF ( netcdf_data_format == 2 ) THEN
991	output_format = 'NetCDF 64bit offset'
992	ELSEIF ( netcdf_data_format == 3 ) THEN
993	output_format = 'NetCDF4/HDF5'
994	ELSEIF ( netcdf_data_format == 4 ) THEN
995	output_format = 'NetCDF4/HDF5 clasic'
996	ENDIF
997	ENDIF
998	IF ( avs_output ) THEN
999	IF ( netcdf_output ) THEN
1000	output_format = TRIM( output_format ) // ' and avs'
1001	ELSE
1002	output_format = 'avs'
1003	ENDIF
1004	ENDIF
1005	WRITE ( io, 344 ) output_format
1006
1007	IF ( do3d_at_begin ) THEN
1008	begin_chr = 'and at the start'
1009	ELSE
1010	begin_chr = ''
1011	ENDIF
1012	IF ( av == 0 ) THEN
1013	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1014	zu(nz_do3d), nz_do3d
1015	ELSE
1016	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1017	TRIM( begin_chr ), averaging_interval, &
1018	dt_averaging_input, zu(nz_do3d), nz_do3d
1019	ENDIF
1020
1021	IF ( do3d_compress ) THEN
1022	do3d_chr = ''
1023	i = 1
1024	DO WHILE ( do3d(av,i) /= ' ' )
1025
1026	SELECT CASE ( do3d(av,i) )
1027	CASE ( 'u' )
1028	j = 1
1029	CASE ( 'v' )
1030	j = 2
1031	CASE ( 'w' )
1032	j = 3
1033	CASE ( 'p' )
1034	j = 4
1035	CASE ( 'pt' )
1036	j = 5
1037	END SELECT
1038	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1039	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1040	':' // prec // ','
1041	i = i + 1
1042
1043	ENDDO
1044	WRITE ( io, 338 ) do3d_chr
1045
1046	ENDIF
1047
1048	IF ( av == 0 ) THEN
1049	IF ( skip_time_do3d /= 0.0 ) THEN
1050	WRITE ( io, 339 ) skip_time_do3d
1051	ENDIF
1052	ELSE
1053	IF ( skip_time_data_output_av /= 0.0 ) THEN
1054	WRITE ( io, 339 ) skip_time_data_output_av
1055	ENDIF
1056	ENDIF
1057
1058	ENDIF
1059
1060	ENDDO
1061
1062	!
1063	!-- masked arrays
1064	IF ( masks > 0 ) WRITE ( io, 345 ) &
1065	mask_scale_x, mask_scale_y, mask_scale_z
1066	DO mid = 1, masks
1067	DO av = 0, 1
1068
1069	i = 1
1070	domask_chr = ''
1071	DO WHILE ( domask(mid,av,i) /= ' ' )
1072	domask_chr = TRIM( domask_chr ) // ' ' // &
1073	TRIM( domask(mid,av,i) ) // ','
1074	i = i + 1
1075	ENDDO
1076
1077	IF ( domask_chr /= '' ) THEN
1078	IF ( av == 0 ) THEN
1079	WRITE ( io, 346 ) '', mid
1080	ELSE
1081	WRITE ( io, 346 ) ' (time-averaged)', mid
1082	ENDIF
1083
1084	output_format = ''
1085	IF ( netcdf_output ) THEN
1086	IF ( netcdf_data_format == 1 ) THEN
1087	output_format = 'NetCDF classic'
1088	ELSEIF ( netcdf_data_format == 2 ) THEN
1089	output_format = 'NetCDF 64bit offset'
1090	ELSEIF ( netcdf_data_format == 3 ) THEN
1091	output_format = 'NetCDF4/HDF5'
1092	ELSEIF ( netcdf_data_format == 4 ) THEN
1093	output_format = 'NetCDF4/HDF5 clasic'
1094	ENDIF
1095	ENDIF
1096	WRITE ( io, 344 ) output_format
1097
1098	IF ( av == 0 ) THEN
1099	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1100	ELSE
1101	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1102	averaging_interval, dt_averaging_input
1103	ENDIF
1104
1105	IF ( av == 0 ) THEN
1106	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1107	WRITE ( io, 339 ) skip_time_domask(mid)
1108	ENDIF
1109	ELSE
1110	IF ( skip_time_data_output_av /= 0.0 ) THEN
1111	WRITE ( io, 339 ) skip_time_data_output_av
1112	ENDIF
1113	ENDIF
1114	!
1115	!-- output locations
1116	DO dim = 1, 3
1117	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1118	count = 0
1119	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1120	count = count + 1
1121	ENDDO
1122	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1123	mask(mid,dim,:count)
1124	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1125	mask_loop(mid,dim,2) < 0.0 .AND. &
1126	mask_loop(mid,dim,3) == 0.0 ) THEN
1127	WRITE ( io, 350 ) dir(dim), dir(dim)
1128	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1129	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1130	mask_loop(mid,dim,1:2)
1131	ELSE
1132	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1133	mask_loop(mid,dim,1:3)
1134	ENDIF
1135	ENDDO
1136	ENDIF
1137
1138	ENDDO
1139	ENDDO
1140
1141	!
1142	!-- Timeseries
1143	IF ( dt_dots /= 9999999.9 ) THEN
1144	WRITE ( io, 340 )
1145
1146	output_format = ''
1147	IF ( netcdf_output ) THEN
1148	IF ( netcdf_data_format == 1 ) THEN
1149	output_format = 'NetCDF classic'
1150	ELSE
1151	output_format = 'NetCDF 64bit offset'
1152	ENDIF
1153	ENDIF
1154	IF ( profil_output ) THEN
1155	IF ( netcdf_output ) THEN
1156	output_format = TRIM( output_format ) // ' and profil'
1157	ELSE
1158	output_format = 'profil'
1159	ENDIF
1160	ENDIF
1161	WRITE ( io, 344 ) output_format
1162	WRITE ( io, 341 ) dt_dots
1163	ENDIF
1164
1165	#if defined( __dvrp_graphics )
1166	!
1167	!-- Dvrp-output
1168	IF ( dt_dvrp /= 9999999.9 ) THEN
1169	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1170	TRIM( dvrp_username ), TRIM( dvrp_directory )
1171	i = 1
1172	l = 0
1173	m = 0
1174	DO WHILE ( mode_dvrp(i) /= ' ' )
1175	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1176	READ ( mode_dvrp(i), '(10X,I2)' ) j
1177	l = l + 1
1178	IF ( do3d(0,j) /= ' ' ) THEN
1179	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1180	isosurface_color(:,l)
1181	ENDIF
1182	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1183	READ ( mode_dvrp(i), '(6X,I2)' ) j
1184	m = m + 1
1185	IF ( do2d(0,j) /= ' ' ) THEN
1186	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1187	slicer_range_limits_dvrp(:,m)
1188	ENDIF
1189	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1190	WRITE ( io, 363 ) dvrp_psize
1191	IF ( particle_dvrpsize /= 'none' ) THEN
1192	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1193	dvrpsize_interval
1194	ENDIF
1195	IF ( particle_color /= 'none' ) THEN
1196	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1197	color_interval
1198	ENDIF
1199	ENDIF
1200	i = i + 1
1201	ENDDO
1202
1203	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1204	superelevation_y, superelevation, clip_dvrp_l, &
1205	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1206
1207	IF ( TRIM( topography ) /= 'flat' ) THEN
1208	WRITE ( io, 366 ) topography_color
1209	IF ( cluster_size > 1 ) THEN
1210	WRITE ( io, 367 ) cluster_size
1211	ENDIF
1212	ENDIF
1213
1214	ENDIF
1215	#endif
1216
1217	#if defined( __spectra )
1218	!
1219	!-- Spectra output
1220	IF ( dt_dosp /= 9999999.9 ) THEN
1221	WRITE ( io, 370 )
1222
1223	output_format = ''
1224	IF ( netcdf_output ) THEN
1225	IF ( netcdf_data_format == 1 ) THEN
1226	output_format = 'NetCDF classic'
1227	ELSE
1228	output_format = 'NetCDF 64bit offset'
1229	ENDIF
1230	ENDIF
1231	IF ( profil_output ) THEN
1232	IF ( netcdf_output ) THEN
1233	output_format = TRIM( output_format ) // ' and profil'
1234	ELSE
1235	output_format = 'profil'
1236	ENDIF
1237	ENDIF
1238	WRITE ( io, 344 ) output_format
1239	WRITE ( io, 371 ) dt_dosp
1240	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1241	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1242	( spectra_direction(i), i = 1,10 ), &
1243	( comp_spectra_level(i), i = 1,100 ), &
1244	( plot_spectra_level(i), i = 1,100 ), &
1245	averaging_interval_sp, dt_averaging_input_pr
1246	ENDIF
1247	#endif
1248
1249	WRITE ( io, 99 )
1250
1251	!
1252	!-- Physical quantities
1253	WRITE ( io, 400 )
1254
1255	!
1256	!-- Geostrophic parameters
1257	WRITE ( io, 410 ) omega, phi, f, fs
1258
1259	!
1260	!-- Other quantities
1261	WRITE ( io, 411 ) g
1262	IF ( use_reference ) THEN
1263	IF ( ocean ) THEN
1264	WRITE ( io, 412 ) prho_reference
1265	ELSE
1266	WRITE ( io, 413 ) pt_reference
1267	ENDIF
1268	ENDIF
1269
1270	!
1271	!-- Cloud physics parameters
1272	IF ( cloud_physics ) THEN
1273	WRITE ( io, 415 )
1274	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1275	ENDIF
1276
1277	!-- Profile of the geostrophic wind (component ug)
1278	!-- Building output strings
1279	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1280	gradients = '------'
1281	slices = ' 0'
1282	coordinates = ' 0.0'
1283	i = 1
1284	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1285
1286	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1287	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1288
1289	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1290	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1291
1292	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1293	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1294
1295	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1296	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1297
1298	IF ( i == 10 ) THEN
1299	EXIT
1300	ELSE
1301	i = i + 1
1302	ENDIF
1303
1304	ENDDO
1305
1306	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1307	TRIM( gradients ), TRIM( slices )
1308
1309	!-- Profile of the geostrophic wind (component vg)
1310	!-- Building output strings
1311	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1312	gradients = '------'
1313	slices = ' 0'
1314	coordinates = ' 0.0'
1315	i = 1
1316	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1317
1318	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1319	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1320
1321	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1322	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1323
1324	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1325	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1326
1327	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1328	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1329
1330	IF ( i == 10 ) THEN
1331	EXIT
1332	ELSE
1333	i = i + 1
1334	ENDIF
1335
1336	ENDDO
1337
1338	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1339	TRIM( gradients ), TRIM( slices )
1340
1341	!
1342	!-- Initial wind profiles
1343	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1344
1345	!
1346	!-- Initial temperature profile
1347	!-- Building output strings, starting with surface temperature
1348	WRITE ( temperatures, '(F6.2)' ) pt_surface
1349	gradients = '------'
1350	slices = ' 0'
1351	coordinates = ' 0.0'
1352	i = 1
1353	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1354
1355	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1356	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1357
1358	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1359	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1360
1361	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1362	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1363
1364	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1365	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1366
1367	IF ( i == 10 ) THEN
1368	EXIT
1369	ELSE
1370	i = i + 1
1371	ENDIF
1372
1373	ENDDO
1374
1375	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1376	TRIM( gradients ), TRIM( slices )
1377
1378	!
1379	!-- Initial humidity profile
1380	!-- Building output strings, starting with surface humidity
1381	IF ( humidity .OR. passive_scalar ) THEN
1382	WRITE ( temperatures, '(E8.1)' ) q_surface
1383	gradients = '--------'
1384	slices = ' 0'
1385	coordinates = ' 0.0'
1386	i = 1
1387	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1388
1389	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1390	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1391
1392	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1393	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1394
1395	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1396	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1397
1398	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1399	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1400
1401	IF ( i == 10 ) THEN
1402	EXIT
1403	ELSE
1404	i = i + 1
1405	ENDIF
1406
1407	ENDDO
1408
1409	IF ( humidity ) THEN
1410	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1411	TRIM( gradients ), TRIM( slices )
1412	ELSE
1413	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1414	TRIM( gradients ), TRIM( slices )
1415	ENDIF
1416	ENDIF
1417
1418	!
1419	!-- Initial salinity profile
1420	!-- Building output strings, starting with surface salinity
1421	IF ( ocean ) THEN
1422	WRITE ( temperatures, '(F6.2)' ) sa_surface
1423	gradients = '------'
1424	slices = ' 0'
1425	coordinates = ' 0.0'
1426	i = 1
1427	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1428
1429	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1430	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1431
1432	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1433	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1434
1435	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1436	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1437
1438	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1439	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1440
1441	IF ( i == 10 ) THEN
1442	EXIT
1443	ELSE
1444	i = i + 1
1445	ENDIF
1446
1447	ENDDO
1448
1449	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1450	TRIM( gradients ), TRIM( slices )
1451	ENDIF
1452
1453	!
1454	!-- Profile for the large scale vertial velocity
1455	!-- Building output strings, starting with surface value
1456	IF ( large_scale_subsidence ) THEN
1457	temperatures = ' 0.0'
1458	gradients = '------'
1459	slices = ' 0'
1460	coordinates = ' 0.0'
1461	i = 1
1462	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1463
1464	WRITE (coor_chr,'(E10.2,7X)') &
1465	w_subs(subs_vertical_gradient_level_i(i))
1466	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1467
1468	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1469	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1470
1471	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1472	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1473
1474	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1475	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1476
1477	IF ( i == 10 ) THEN
1478	EXIT
1479	ELSE
1480	i = i + 1
1481	ENDIF
1482
1483	ENDDO
1484
1485	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1486	TRIM( gradients ), TRIM( slices )
1487	ENDIF
1488
1489	!
1490	!-- Cloud physcis parameters / quantities / numerical methods
1491	WRITE ( io, 430 )
1492	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1493	WRITE ( io, 431 )
1494	ELSEIF ( humidity .AND. cloud_physics ) THEN
1495	WRITE ( io, 432 )
1496	IF ( radiation ) WRITE ( io, 132 )
1497	IF ( precipitation ) WRITE ( io, 133 )
1498	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1499	WRITE ( io, 433 )
1500	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1501	IF ( collision_kernel /= 'none' ) THEN
1502	WRITE ( io, 435 ) TRIM( collision_kernel )
1503	IF ( collision_kernel(6:9) == 'fast' ) THEN
1504	WRITE ( io, 436 ) radius_classes, dissipation_classes
1505	ENDIF
1506	ELSE
1507	WRITE ( io, 437 )
1508	ENDIF
1509	ENDIF
1510
1511	!
1512	!-- LES / turbulence parameters
1513	WRITE ( io, 450 )
1514
1515	!--
1516	! ... LES-constants used must still be added here
1517	!--
1518	IF ( constant_diffusion ) THEN
1519	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1520	prandtl_number
1521	ENDIF
1522	IF ( .NOT. constant_diffusion) THEN
1523	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1524	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1525	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1526	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1527	ENDIF
1528
1529	!
1530	!-- Special actions during the run
1531	WRITE ( io, 470 )
1532	IF ( create_disturbances ) THEN
1533	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1534	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1535	zu(disturbance_level_ind_t), disturbance_level_ind_t
1536	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1537	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1538	ELSE
1539	WRITE ( io, 473 ) disturbance_energy_limit
1540	ENDIF
1541	WRITE ( io, 474 ) TRIM( random_generator )
1542	ENDIF
1543	IF ( pt_surface_initial_change /= 0.0 ) THEN
1544	WRITE ( io, 475 ) pt_surface_initial_change
1545	ENDIF
1546	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1547	WRITE ( io, 476 ) q_surface_initial_change
1548	ENDIF
1549	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1550	WRITE ( io, 477 ) q_surface_initial_change
1551	ENDIF
1552
1553	IF ( particle_advection ) THEN
1554	!
1555	!-- Particle attributes
1556	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1557	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1558	end_time_prel, dt_sort_particles
1559	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1560	IF ( random_start_position ) WRITE ( io, 481 )
1561	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1562	WRITE ( io, 495 ) total_number_of_particles
1563	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1564	WRITE ( io, 483 ) maximum_number_of_tailpoints
1565	IF ( minimum_tailpoint_distance /= 0 ) THEN
1566	WRITE ( io, 484 ) total_number_of_tails, &
1567	minimum_tailpoint_distance, &
1568	maximum_tailpoint_age
1569	ENDIF
1570	ENDIF
1571	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1572	WRITE ( io, 485 ) dt_write_particle_data
1573	output_format = ''
1574	IF ( netcdf_output ) THEN
1575	IF ( netcdf_data_format > 1 ) THEN
1576	output_format = 'netcdf (64 bit offset) and binary'
1577	ELSE
1578	output_format = 'netcdf and binary'
1579	ENDIF
1580	ELSE
1581	output_format = 'binary'
1582	ENDIF
1583	WRITE ( io, 344 ) output_format
1584	ENDIF
1585	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1586	IF ( write_particle_statistics ) WRITE ( io, 486 )
1587
1588	WRITE ( io, 487 ) number_of_particle_groups
1589
1590	DO i = 1, number_of_particle_groups
1591	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1592	WRITE ( io, 490 ) i, 0.0
1593	WRITE ( io, 492 )
1594	ELSE
1595	WRITE ( io, 490 ) i, radius(i)
1596	IF ( density_ratio(i) /= 0.0 ) THEN
1597	WRITE ( io, 491 ) density_ratio(i)
1598	ELSE
1599	WRITE ( io, 492 )
1600	ENDIF
1601	ENDIF
1602	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1603	pdx(i), pdy(i), pdz(i)
1604	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1605	ENDDO
1606
1607	ENDIF
1608
1609
1610	!
1611	!-- Parameters of 1D-model
1612	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1613	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1614	mixing_length_1d, dissipation_1d
1615	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1616	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1617	ENDIF
1618	ENDIF
1619
1620	!
1621	!-- User-defined informations
1622	CALL user_header( io )
1623
1624	WRITE ( io, 99 )
1625
1626	!
1627	!-- Write buffer contents to disc immediately
1628	CALL local_flush( io )
1629
1630	!
1631	!-- Here the FORMATs start
1632
1633	99 FORMAT (1X,78('-'))
1634	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1635	1X,'* ',A,' *',9X,A/ &
1636	1X,'***************************',9X,42('-'))
1637	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1638	37X,42('-'))
1639	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1640	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1641	' Run on host: ',A10)
1642	#if defined( __parallel )
1643	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1644	')',1X,A)
1645	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1646	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1647	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1648	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1649	37X,'because the job is running on an SMP-cluster')
1650	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1651	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1652	#endif
1653	110 FORMAT (/' Numerical Schemes:'/ &
1654	' -----------------'/)
1655	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1656	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1657	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1658	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1659	' or Upstream')
1660	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1661	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1662	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1663	' or Upstream')
1664	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1665	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1666	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1667	' Translation velocity = ',A/ &
1668	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1669	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1670	' of timestep changes)')
1671	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1672	' timestep changes')
1673	122 FORMAT (' --> Time differencing scheme: ',A)
1674	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1675	' maximum damping coefficient: ',F5.3, ' 1/s')
1676	124 FORMAT (' Spline-overshoots are being suppressed')
1677	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1678	' of'/ &
1679	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1680	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1681	' of'/ &
1682	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1683	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1684	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1685	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1686	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1687	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1688	130 FORMAT (' --> Additional prognostic equation for the total water content')
1689	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1690	F6.2, ' K assumed')
1691	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1692	' effective emissivity scheme')
1693	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1694	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1695	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1696	A,'-cycle)'/ &
1697	' number of grid levels: ',I2/ &
1698	' Gauss-Seidel red/black iterations: ',I2)
1699	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1700	I3,')')
1701	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1702	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1703	I3,')'/ &
1704	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1705	I3,')')
1706	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1707	139 FORMAT (' --> Loop optimization method: ',A)
1708	140 FORMAT (' maximum residual allowed: ',E10.3)
1709	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1710	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1711	'step')
1712	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1713	'kinetic energy')
1714	144 FORMAT (' masking method is used')
1715	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1716	'conserved'/ &
1717	' using the ',A,' mode')
1718	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1719	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1720	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1721	/' starting from dp_level_b =', F8.3, 'm', A /)
1722	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1723	'prognostic equation for')
1724	154 FORMAT (' the potential temperature')
1725	200 FORMAT (//' Run time and time step information:'/ &
1726	' ----------------------------------'/)
1727	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1728	' CFL-factor: ',F4.2)
1729	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1730	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1731	' End time: ',F9.3,' s')
1732	204 FORMAT ( A,F9.3,' s')
1733	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1734	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1735	' CPU-time used: ',F9.3,' s per timestep: ', &
1736	' ',F9.3,' s'/ &
1737	' per second of simulated tim', &
1738	'e: ',F9.3,' s')
1739	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1740	250 FORMAT (//' Computational grid and domain size:'/ &
1741	' ----------------------------------'// &
1742	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1743	' m dz = ',F7.3,' m'/ &
1744	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1745	' m z(u) = ',F10.3,' m'/)
1746	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1747	' factor: ',F5.3/ &
1748	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1749	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1750	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1751	255 FORMAT (' Subdomains have equal size')
1752	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1753	'have smaller sizes'/ &
1754	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1755	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1756	' degrees')
1757	270 FORMAT (//' Topography informations:'/ &
1758	' -----------------------'// &
1759	1X,'Topography: ',A)
1760	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1761	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1762	' / ',I4)
1763	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1764	' direction' / &
1765	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1766	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1767	278 FORMAT (' Topography grid definition convention:'/ &
1768	' cell edge (staggered grid points'/ &
1769	' (u in x-direction, v in y-direction))' /)
1770	279 FORMAT (' Topography grid definition convention:'/ &
1771	' cell center (scalar grid points)' /)
1772	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1773	' ------------------------------'// &
1774	' Canopy mode: ', A / &
1775	' Canopy top: ',I4 / &
1776	' Leaf drag coefficient: ',F6.2 /)
1777	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1778	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1779	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1780	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1781	' Height: ',A,' m'/ &
1782	' Leaf area density: ',A,' m2/m3'/ &
1783	' Gradient: ',A,' m2/m4'/ &
1784	' Gridpoint: ',A)
1785
1786	300 FORMAT (//' Boundary conditions:'/ &
1787	' -------------------'// &
1788	' p uv ', &
1789	' pt'// &
1790	' B. bound.: ',A/ &
1791	' T. bound.: ',A)
1792	301 FORMAT (/' ',A// &
1793	' B. bound.: ',A/ &
1794	' T. bound.: ',A)
1795	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1796	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1797	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1798	'computational u,v-level:'// &
1799	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1800	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1801	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1802	307 FORMAT (' Heatflux has a random normal distribution')
1803	308 FORMAT (' Predefined surface temperature')
1804	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1805	310 FORMAT (//' 1D-Model:'// &
1806	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1807	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1808	312 FORMAT (' Predefined surface humidity')
1809	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1810	314 FORMAT (' Predefined scalar value at the surface')
1811	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1812	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1813	'atmosphere model')
1814	317 FORMAT (//' Lateral boundaries:'/ &
1815	' left/right: ',A/ &
1816	' north/south: ',A)
1817	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1818	'max =',F5.1,' m**2/s')
1819	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1820	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1821	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1822	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1823	' v: ',F9.6,' m2/s2')
1824	325 FORMAT (//' List output:'/ &
1825	' -----------'// &
1826	' 1D-Profiles:'/ &
1827	' Output every ',F8.2,' s')
1828	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1829	' Averaging input every ',F8.2,' s')
1830	330 FORMAT (//' Data output:'/ &
1831	' -----------'/)
1832	331 FORMAT (/' 1D-Profiles:')
1833	332 FORMAT (/' ',A)
1834	333 FORMAT (' Output every ',F8.2,' s',/ &
1835	' Time averaged over ',F8.2,' s'/ &
1836	' Averaging input every ',F8.2,' s')
1837	334 FORMAT (/' 2D-Arrays',A,':')
1838	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1839	' Output every ',F8.2,' s ',A/ &
1840	' Cross sections at ',A1,' = ',A/ &
1841	' scalar-coordinates: ',A,' m'/)
1842	336 FORMAT (/' 3D-Arrays',A,':')
1843	337 FORMAT (/' Arrays: ',A/ &
1844	' Output every ',F8.2,' s ',A/ &
1845	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1846	338 FORMAT (' Compressed data output'/ &
1847	' Decimal precision: ',A/)
1848	339 FORMAT (' No output during initial ',F8.2,' s')
1849	340 FORMAT (/' Time series:')
1850	341 FORMAT (' Output every ',F8.2,' s'/)
1851	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1852	' Output every ',F8.2,' s ',A/ &
1853	' Time averaged over ',F8.2,' s'/ &
1854	' Averaging input every ',F8.2,' s'/ &
1855	' Cross sections at ',A1,' = ',A/ &
1856	' scalar-coordinates: ',A,' m'/)
1857	343 FORMAT (/' Arrays: ',A/ &
1858	' Output every ',F8.2,' s ',A/ &
1859	' Time averaged over ',F8.2,' s'/ &
1860	' Averaging input every ',F8.2,' s'/ &
1861	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1862	344 FORMAT (' Output format: ',A/)
1863	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1864	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1865	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1866	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1867	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1868	347 FORMAT (' Variables: ',A/ &
1869	' Output every ',F8.2,' s')
1870	348 FORMAT (' Variables: ',A/ &
1871	' Output every ',F8.2,' s'/ &
1872	' Time averaged over ',F8.2,' s'/ &
1873	' Averaging input every ',F8.2,' s')
1874	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1875	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1876	13(' ',8(F8.2,',')/) )
1877	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1878	'all gridpoints along ',A,'-direction (default).' )
1879	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1880	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1881	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1882	#if defined( __dvrp_graphics )
1883	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1884	' Output every ',F7.1,' s'/ &
1885	' Output mode: ',A/ &
1886	' Host / User: ',A,' / ',A/ &
1887	' Directory: ',A// &
1888	' The sequence contains:')
1889	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1890	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1891	362 FORMAT (/' Slicer plane ',A/ &
1892	' Slicer limits: [',F6.2,',',F6.2,']')
1893	363 FORMAT (/' Particles'/ &
1894	' particle size: ',F7.2,' m')
1895	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1896	F6.2,',',F6.2,']')
1897	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1898	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1899	')'/ &
1900	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1901	' from y = ',F9.1,' m to y = ',F9.1,' m')
1902	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1903	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1904	#endif
1905	#if defined( __spectra )
1906	370 FORMAT (' Spectra:')
1907	371 FORMAT (' Output every ',F7.1,' s'/)
1908	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1909	' Directions: ', 10(A5,',')/ &
1910	' height levels k = ', 20(I3,',')/ &
1911	' ', 20(I3,',')/ &
1912	' ', 20(I3,',')/ &
1913	' ', 20(I3,',')/ &
1914	' ', 19(I3,','),I3,'.'/ &
1915	' height levels selected for standard plot:'/ &
1916	' k = ', 20(I3,',')/ &
1917	' ', 20(I3,',')/ &
1918	' ', 20(I3,',')/ &
1919	' ', 20(I3,',')/ &
1920	' ', 19(I3,','),I3,'.'/ &
1921	' Time averaged over ', F7.1, ' s,' / &
1922	' Profiles for the time averaging are taken every ', &
1923	F6.1,' s')
1924	#endif
1925	400 FORMAT (//' Physical quantities:'/ &
1926	' -------------------'/)
1927	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1928	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1929	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1930	' f* = ',F9.6,' 1/s')
1931	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1932	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1933	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1934	415 FORMAT (/' Cloud physics parameters:'/ &
1935	' ------------------------'/)
1936	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1937	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1938	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1939	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1940	' Vapourization heat : L_v = ',E8.2,' J/kg')
1941	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1942	' Height: ',A,' m'/ &
1943	' Temperature: ',A,' K'/ &
1944	' Gradient: ',A,' K/100m'/ &
1945	' Gridpoint: ',A)
1946	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1947	' Height: ',A,' m'/ &
1948	' Humidity: ',A,' kg/kg'/ &
1949	' Gradient: ',A,' (kg/kg)/100m'/ &
1950	' Gridpoint: ',A)
1951	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1952	' Height: ',A,' m'/ &
1953	' Scalar concentration: ',A,' kg/m**3'/ &
1954	' Gradient: ',A,' (kg/m**3)/100m'/ &
1955	' Gridpoint: ',A)
1956	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1957	' Height: ',A,' m'/ &
1958	' ug: ',A,' m/s'/ &
1959	' Gradient: ',A,' 1/100s'/ &
1960	' Gridpoint: ',A)
1961	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1962	' Height: ',A,' m'/ &
1963	' vg: ',A,' m/s'/ &
1964	' Gradient: ',A,' 1/100s'/ &
1965	' Gridpoint: ',A)
1966	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1967	' Height: ',A,' m'/ &
1968	' Salinity: ',A,' psu'/ &
1969	' Gradient: ',A,' psu/100m'/ &
1970	' Gridpoint: ',A)
1971	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1972	' Height: ',A,' m'/ &
1973	' w_subs: ',A,' m/s'/ &
1974	' Gradient: ',A,' (m/s)/100m'/ &
1975	' Gridpoint: ',A)
1976	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1977	' profiles')
1978	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1979	' ----------------------------------'/)
1980	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1981	'on)')
1982	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1983	' total water content is used.'/ &
1984	' Condensation is parameterized via 0% - or 100% scheme.')
1985	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1986	'icle model')
1987	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1988	' droplets < 1.0E-6 m')
1989	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1990	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1991	'are used'/ &
1992	' number of radius classes: ',I3,' interval ', &
1993	'[1.0E-6,2.0E-4] m'/ &
1994	' number of dissipation classes: ',I2,' interval ', &
1995	'[0,1000] cm2/s3')
1996	437 FORMAT (' Droplet collision is switched off')
1997	450 FORMAT (//' LES / Turbulence quantities:'/ &
1998	' ---------------------------'/)
1999	451 FORMAT (' Diffusion coefficients are constant:'/ &
2000	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
2001	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
2002	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
2003	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
2004	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
2005	470 FORMAT (//' Actions during the simulation:'/ &
2006	' -----------------------------'/)
2007	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
2008	' Disturbance amplitude : ',F4.2, ' m/s'/ &
2009	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
2010	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
2011	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2012	' to i/j =',I4)
2013	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2014	1X,F5.3, ' m2/s2')
2015	474 FORMAT (' Random number generator used : ',A/)
2016	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2017	'respectively, if'/ &
2018	' the value is negative) by ',F5.2,' K at the beginning of the',&
2019	' 3D-simulation'/)
2020	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2021	'respectively, if the'/ &
2022	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2023	' the 3D-simulation'/)
2024	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2025	'respectively, if the'/ &
2026	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2027	' the 3D-simulation'/)
2028	480 FORMAT (' Particles:'/ &
2029	' ---------'// &
2030	' Particle advection is active (switched on at t = ', F7.1, &
2031	' s)'/ &
2032	' Start of new particle generations every ',F6.1,' s'/ &
2033	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2034	' bottom: ', A, ' top: ', A/&
2035	' Maximum particle age: ',F9.1,' s'/ &
2036	' Advection stopped at t = ',F9.1,' s'/ &
2037	' Particles are sorted every ',F9.1,' s'/)
2038	481 FORMAT (' Particles have random start positions'/)
2039	482 FORMAT (' Particles are advected only horizontally'/)
2040	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2041	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2042	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2043	' Maximum age of the end of the tail: ',F8.2,' s')
2044	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2045	486 FORMAT (' Particle statistics are written on file'/)
2046	487 FORMAT (' Number of particle groups: ',I2/)
2047	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2048	' minimum timestep for advection: ', F7.5/)
2049	489 FORMAT (' Number of particles simultaneously released at each ', &
2050	'point: ', I5/)
2051	490 FORMAT (' Particle group ',I2,':'/ &
2052	' Particle radius: ',E10.3, 'm')
2053	491 FORMAT (' Particle inertia is activated'/ &
2054	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2055	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2056	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2057	' y:',F8.1,' - ',F8.1,' m'/&
2058	' z:',F8.1,' - ',F8.1,' m'/&
2059	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2060	' m dz = ',F8.1,' m'/)
2061	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2062	F8.2,' s'/)
2063	495 FORMAT (' Number of particles in total domain: ',I10/)
2064	500 FORMAT (//' 1D-Model parameters:'/ &
2065	' -------------------'// &
2066	' Simulation time: ',F8.1,' s'/ &
2067	' Run-controll output every: ',F8.1,' s'/ &
2068	' Vertical profile output every: ',F8.1,' s'/ &
2069	' Mixing length calculation: ',A/ &
2070	' Dissipation calculation: ',A/)
2071	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2072	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2073	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2074
2075
2076	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |