Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 937

Last change on this file since 937 was 928, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 928 2012-06-06 19:54:18Z raasch $
11	!
12	! 927 2012-06-06 19:15:04Z raasch
13	! output of masking_method for mg-solver
14	!
15	! 868 2012-03-28 12:21:07Z raasch
16	! translation velocity in Galilean transformation changed to 0.6 * ug
17	!
18	! 833 2012-02-22 08:55:55Z maronga
19	! Adjusted format for leaf area density
20	!
21	! 828 2012-02-21 12:00:36Z raasch
22	! output of dissipation_classes + radius_classes
23	!
24	! 825 2012-02-19 03:03:44Z raasch
25	! Output of cloud physics parameters/quantities complemented and restructured
26	!
27	! 767 2011-10-14 06:39:12Z raasch
28	! Output of given initial u,v-profiles
29	!
30	! 759 2011-09-15 13:58:31Z raasch
31	! output of maximum number of parallel io streams
32	!
33	! 707 2011-03-29 11:39:40Z raasch
34	! bc_lr/ns replaced by bc_lr/ns_cyc
35	!
36	! 667 2010-12-23 12:06:00Z suehring/gryschka
37	! Output of advection scheme.
38	! Modified output of Prandtl-layer height.
39	!
40	! 580 2010-10-05 13:59:11Z heinze
41	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
42	! ws_vertical_gradient_level to subs_vertical_gradient_level and
43	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
44	!
45	! 493 2010-03-01 08:30:24Z raasch
46	! NetCDF data output format extendend for NetCDF4/HDF5
47	!
48	! 449 2010-02-02 11:23:59Z raasch
49	! +large scale vertical motion (subsidence/ascent)
50	! Bugfix: index problem concerning gradient_level indices removed
51	!
52	! 410 2009-12-04 17:05:40Z letzel
53	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
54	! mask_scale\|_x\|y\|z, masks, skip_time_domask
55	!
56	! 346 2009-07-06 10:13:41Z raasch
57	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
58	! Coupling with independent precursor runs.
59	! Output of messages replaced by message handling routine.
60	! Output of several additional dvr parameters
61	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
62	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
63	! dp_smooth, dpdxy, u_bulk, v_bulk
64	! topography_grid_convention moved from user_header
65	! small bugfix concerning 3d 64bit netcdf output format
66	!
67	! 206 2008-10-13 14:59:11Z raasch
68	! Bugfix: error in zu index in case of section_xy = -1
69	!
70	! 198 2008-09-17 08:55:28Z raasch
71	! Format adjustments allowing output of larger revision numbers
72	!
73	! 197 2008-09-16 15:29:03Z raasch
74	! allow 100 spectra levels instead of 10 for consistency with
75	! define_netcdf_header,
76	! bugfix in the output of the characteristic levels of potential temperature,
77	! geostrophic wind, scalar concentration, humidity and leaf area density,
78	! output of turbulence recycling informations
79	!
80	! 138 2007-11-28 10:03:58Z letzel
81	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
82	! Allow two instead of one digit to specify isosurface and slicer variables.
83	! Output of sorting frequency of particles
84	!
85	! 108 2007-08-24 15:10:38Z letzel
86	! Output of informations for coupled model runs (boundary conditions etc.)
87	! + output of momentumfluxes at the top boundary
88	! Rayleigh damping for ocean, e_init
89	!
90	! 97 2007-06-21 08:23:15Z raasch
91	! Adjustments for the ocean version.
92	! use_pt_reference renamed use_reference
93	!
94	! 87 2007-05-22 15:46:47Z raasch
95	! Bugfix: output of use_upstream_for_tke
96	!
97	! 82 2007-04-16 15:40:52Z raasch
98	! Preprocessor strings for different linux clusters changed to "lc",
99	! routine local_flush is used for buffer flushing
100	!
101	! 76 2007-03-29 00:58:32Z raasch
102	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
103	! output of the loop optimization method, moisture renamed humidity,
104	! output of subversion revision number
105	!
106	! 19 2007-02-23 04:53:48Z raasch
107	! Output of scalar flux applied at top boundary
108	!
109	! RCS Log replace by Id keyword, revision history cleaned up
110	!
111	! Revision 1.63 2006/08/22 13:53:13 raasch
112	! Output of dz_max
113	!
114	! Revision 1.1 1997/08/11 06:17:20 raasch
115	! Initial revision
116	!
117	!
118	! Description:
119	! ------------
120	! Writing a header with all important informations about the actual run.
121	! This subroutine is called three times, two times at the beginning
122	! (writing information on files RUN_CONTROL and HEADER) and one time at the
123	! end of the run, then writing additional information about CPU-usage on file
124	! header.
125	!-----------------------------------------------------------------------------!
126
127	USE arrays_3d
128	USE control_parameters
129	USE cloud_parameters
130	USE cpulog
131	USE dvrp_variables
132	USE grid_variables
133	USE indices
134	USE model_1d
135	USE particle_attributes
136	USE pegrid
137	USE subsidence_mod
138	USE spectrum
139
140	IMPLICIT NONE
141
142	CHARACTER (LEN=1) :: prec
143	CHARACTER (LEN=2) :: do2d_mode
144	CHARACTER (LEN=5) :: section_chr
145	CHARACTER (LEN=9) :: time_to_string
146	CHARACTER (LEN=10) :: coor_chr, host_chr
147	CHARACTER (LEN=16) :: begin_chr
148	CHARACTER (LEN=23) :: ver_rev
149	CHARACTER (LEN=40) :: output_format
150	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
151	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
152	domask_chr, run_classification
153	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
154	temperatures, ugcomponent, vgcomponent
155	CHARACTER (LEN=85) :: roben, runten
156
157	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
158
159	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
160	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
161	REAL :: cpuseconds_per_simulated_second
162
163	!
164	!-- Open the output file. At the end of the simulation, output is directed
165	!-- to unit 19.
166	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
167	.NOT. simulated_time_at_begin /= simulated_time ) THEN
168	io = 15 ! header output on file RUN_CONTROL
169	ELSE
170	io = 19 ! header output on file HEADER
171	ENDIF
172	CALL check_open( io )
173
174	!
175	!-- At the end of the run, output file (HEADER) will be rewritten with
176	!-- new informations
177	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
178
179	!
180	!-- Determine kind of model run
181	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
182	run_classification = '3D - restart run'
183	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
184	run_classification = '3D - run with cyclic fill of 3D - prerun data'
185	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
186	run_classification = '3D - run without 1D - prerun'
187	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
188	run_classification = '3D - run with 1D - prerun'
189	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
190	run_classification = '3D - run initialized by user'
191	ELSE
192	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
193	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
194	ENDIF
195	IF ( ocean ) THEN
196	run_classification = 'ocean - ' // run_classification
197	ELSE
198	run_classification = 'atmosphere - ' // run_classification
199	ENDIF
200
201	!
202	!-- Run-identification, date, time, host
203	host_chr = host(1:10)
204	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
205	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
206	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
207	#if defined( __mpi2 )
208	mpi_type = 2
209	#else
210	mpi_type = 1
211	#endif
212	WRITE ( io, 101 ) mpi_type, coupling_mode
213	ENDIF
214	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
215	ADJUSTR( host_chr )
216	#if defined( __parallel )
217	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
218	char1 = 'calculated'
219	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
220	host(1:2) == 'lc' ) .AND. &
221	npex == -1 .AND. pdims(2) == 1 ) THEN
222	char1 = 'forced'
223	ELSE
224	char1 = 'predefined'
225	ENDIF
226	IF ( threads_per_task == 1 ) THEN
227	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
228	ELSE
229	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
230	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
231	ENDIF
232	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
233	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
234	npex == -1 .AND. pdims(2) == 1 ) &
235	THEN
236	WRITE ( io, 106 )
237	ELSEIF ( pdims(2) == 1 ) THEN
238	WRITE ( io, 107 ) 'x'
239	ELSEIF ( pdims(1) == 1 ) THEN
240	WRITE ( io, 107 ) 'y'
241	ENDIF
242	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
243	IF ( numprocs /= maximum_parallel_io_streams ) THEN
244	WRITE ( io, 108 ) maximum_parallel_io_streams
245	ENDIF
246	#endif
247	WRITE ( io, 99 )
248
249	!
250	!-- Numerical schemes
251	WRITE ( io, 110 )
252	IF ( psolver(1:7) == 'poisfft' ) THEN
253	WRITE ( io, 111 ) TRIM( fft_method )
254	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
255	ELSEIF ( psolver == 'sor' ) THEN
256	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
257	ELSEIF ( psolver == 'multigrid' ) THEN
258	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
259	IF ( mg_cycles == -1 ) THEN
260	WRITE ( io, 140 ) residual_limit
261	ELSE
262	WRITE ( io, 141 ) mg_cycles
263	ENDIF
264	IF ( mg_switch_to_pe0_level == 0 ) THEN
265	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
266	nzt_mg(1)
267	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
268	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
269	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
270	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
271	nzt_mg(mg_switch_to_pe0_level), &
272	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
273	nzt_mg(1)
274	ENDIF
275	IF ( masking_method ) WRITE ( io, 144 )
276	ENDIF
277	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
278	THEN
279	WRITE ( io, 142 )
280	ENDIF
281
282	IF ( momentum_advec == 'pw-scheme' ) THEN
283	WRITE ( io, 113 )
284	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
285	WRITE ( io, 503 )
286	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
287	WRITE ( io, 114 )
288	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
289	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
290	overshoot_limit_w /= 0.0 ) THEN
291	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
292	overshoot_limit_w
293	ENDIF
294	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
295	ups_limit_w /= 0.0 ) &
296	THEN
297	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
298	ENDIF
299	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
300	ENDIF
301	IF ( scalar_advec == 'pw-scheme' ) THEN
302	WRITE ( io, 116 )
303	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
304	WRITE ( io, 504 )
305	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
306	WRITE ( io, 117 )
307	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
308	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
309	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
310	ENDIF
311	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
312	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
313	ENDIF
314	ELSE
315	WRITE ( io, 118 )
316	ENDIF
317
318	WRITE ( io, 139 ) TRIM( loop_optimization )
319
320	IF ( galilei_transformation ) THEN
321	IF ( use_ug_for_galilei_tr ) THEN
322	char1 = '0.6 * geostrophic wind'
323	ELSE
324	char1 = 'mean wind in model domain'
325	ENDIF
326	IF ( simulated_time_at_begin == simulated_time ) THEN
327	char2 = 'at the start of the run'
328	ELSE
329	char2 = 'at the end of the run'
330	ENDIF
331	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
332	advected_distance_x/1000.0, advected_distance_y/1000.0
333	ENDIF
334	IF ( timestep_scheme == 'leapfrog' ) THEN
335	WRITE ( io, 120 )
336	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
337	WRITE ( io, 121 )
338	ELSE
339	WRITE ( io, 122 ) timestep_scheme
340	ENDIF
341	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
342	IF ( rayleigh_damping_factor /= 0.0 ) THEN
343	IF ( .NOT. ocean ) THEN
344	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
345	rayleigh_damping_factor
346	ELSE
347	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
348	rayleigh_damping_factor
349	ENDIF
350	ENDIF
351	IF ( humidity ) THEN
352	IF ( .NOT. cloud_physics ) THEN
353	WRITE ( io, 129 )
354	ELSE
355	WRITE ( io, 130 )
356	ENDIF
357	ENDIF
358	IF ( passive_scalar ) WRITE ( io, 134 )
359	IF ( conserve_volume_flow ) THEN
360	WRITE ( io, 150 ) conserve_volume_flow_mode
361	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
362	WRITE ( io, 151 ) u_bulk, v_bulk
363	ENDIF
364	ELSEIF ( dp_external ) THEN
365	IF ( dp_smooth ) THEN
366	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
367	ELSE
368	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
369	ENDIF
370	ENDIF
371	IF ( large_scale_subsidence ) THEN
372	WRITE ( io, 153 )
373	WRITE ( io, 154 )
374	ENDIF
375	WRITE ( io, 99 )
376
377	!
378	!-- Runtime and timestep informations
379	WRITE ( io, 200 )
380	IF ( .NOT. dt_fixed ) THEN
381	WRITE ( io, 201 ) dt_max, cfl_factor
382	ELSE
383	WRITE ( io, 202 ) dt
384	ENDIF
385	WRITE ( io, 203 ) simulated_time_at_begin, end_time
386
387	IF ( time_restart /= 9999999.9 .AND. &
388	simulated_time_at_begin == simulated_time ) THEN
389	IF ( dt_restart == 9999999.9 ) THEN
390	WRITE ( io, 204 ) ' Restart at: ',time_restart
391	ELSE
392	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
393	ENDIF
394	ENDIF
395
396	IF ( simulated_time_at_begin /= simulated_time ) THEN
397	i = MAX ( log_point_s(10)%counts, 1 )
398	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
399	cpuseconds_per_simulated_second = 0.0
400	ELSE
401	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
402	( simulated_time - &
403	simulated_time_at_begin )
404	ENDIF
405	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
406	log_point_s(10)%sum / REAL( i ), &
407	cpuseconds_per_simulated_second
408	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
409	IF ( dt_restart == 9999999.9 ) THEN
410	WRITE ( io, 204 ) ' Next restart at: ',time_restart
411	ELSE
412	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
413	ENDIF
414	ENDIF
415	ENDIF
416
417	!
418	!-- Start time for coupled runs, if independent precursor runs for atmosphere
419	!-- and ocean are used. In this case, coupling_start_time defines the time
420	!-- when the coupling is switched on.
421	IF ( coupling_start_time /= 0.0 ) THEN
422	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
423	char1 = 'Precursor run for a coupled atmosphere-ocean run'
424	ELSE
425	char1 = 'Coupled atmosphere-ocean run following independent ' // &
426	'precursor runs'
427	ENDIF
428	WRITE ( io, 207 ) char1, coupling_start_time
429	ENDIF
430
431	!
432	!-- Computational grid
433	IF ( .NOT. ocean ) THEN
434	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
435	IF ( dz_stretch_level_index < nzt+1 ) THEN
436	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
437	dz_stretch_factor, dz_max
438	ENDIF
439	ELSE
440	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
441	IF ( dz_stretch_level_index > 0 ) THEN
442	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
443	dz_stretch_factor, dz_max
444	ENDIF
445	ENDIF
446	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
447	MIN( nnz+2, nzt+2 )
448	IF ( numprocs > 1 ) THEN
449	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
450	WRITE ( io, 255 )
451	ELSE
452	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
453	ENDIF
454	ENDIF
455	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
456
457	!
458	!-- Topography
459	WRITE ( io, 270 ) topography
460	SELECT CASE ( TRIM( topography ) )
461
462	CASE ( 'flat' )
463	! no actions necessary
464
465	CASE ( 'single_building' )
466	blx = INT( building_length_x / dx )
467	bly = INT( building_length_y / dy )
468	bh = INT( building_height / dz )
469
470	IF ( building_wall_left == 9999999.9 ) THEN
471	building_wall_left = ( nx + 1 - blx ) / 2 * dx
472	ENDIF
473	bxl = INT ( building_wall_left / dx + 0.5 )
474	bxr = bxl + blx
475
476	IF ( building_wall_south == 9999999.9 ) THEN
477	building_wall_south = ( ny + 1 - bly ) / 2 * dy
478	ENDIF
479	bys = INT ( building_wall_south / dy + 0.5 )
480	byn = bys + bly
481
482	WRITE ( io, 271 ) building_length_x, building_length_y, &
483	building_height, bxl, bxr, bys, byn
484
485	CASE ( 'single_street_canyon' )
486	ch = NINT( canyon_height / dz )
487	IF ( canyon_width_x /= 9999999.9 ) THEN
488	!
489	!-- Street canyon in y direction
490	cwx = NINT( canyon_width_x / dx )
491	IF ( canyon_wall_left == 9999999.9 ) THEN
492	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
493	ENDIF
494	cxl = NINT( canyon_wall_left / dx )
495	cxr = cxl + cwx
496	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
497
498	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
499	!
500	!-- Street canyon in x direction
501	cwy = NINT( canyon_width_y / dy )
502	IF ( canyon_wall_south == 9999999.9 ) THEN
503	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
504	ENDIF
505	cys = NINT( canyon_wall_south / dy )
506	cyn = cys + cwy
507	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
508	ENDIF
509
510	END SELECT
511
512	IF ( TRIM( topography ) /= 'flat' ) THEN
513	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
514	IF ( TRIM( topography ) == 'single_building' .OR. &
515	TRIM( topography ) == 'single_street_canyon' ) THEN
516	WRITE ( io, 278 )
517	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
518	WRITE ( io, 279 )
519	ENDIF
520	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
521	WRITE ( io, 278 )
522	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
523	WRITE ( io, 279 )
524	ENDIF
525	ENDIF
526
527	IF ( plant_canopy ) THEN
528
529	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
530	IF ( passive_scalar ) THEN
531	WRITE ( io, 281 ) scalar_exchange_coefficient, &
532	leaf_surface_concentration
533	ENDIF
534
535	!
536	!-- Heat flux at the top of vegetation
537	WRITE ( io, 282 ) cthf
538
539	!
540	!-- Leaf area density profile
541	!-- Building output strings, starting with surface value
542	WRITE ( learde, '(F6.4)' ) lad_surface
543	gradients = '------'
544	slices = ' 0'
545	coordinates = ' 0.0'
546	i = 1
547	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
548
549	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
550	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
551
552	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
553	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
554
555	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
556	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
557
558	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
559	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
560
561	i = i + 1
562	ENDDO
563
564	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
565	TRIM( gradients ), TRIM( slices )
566
567	ENDIF
568
569	!
570	!-- Boundary conditions
571	IF ( ibc_p_b == 0 ) THEN
572	runten = 'p(0) = 0 \|'
573	ELSEIF ( ibc_p_b == 1 ) THEN
574	runten = 'p(0) = p(1) \|'
575	ELSE
576	runten = 'p(0) = p(1) +R\|'
577	ENDIF
578	IF ( ibc_p_t == 0 ) THEN
579	roben = 'p(nzt+1) = 0 \|'
580	ELSE
581	roben = 'p(nzt+1) = p(nzt) \|'
582	ENDIF
583
584	IF ( ibc_uv_b == 0 ) THEN
585	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
586	ELSE
587	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
588	ENDIF
589	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
590	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
591	ELSEIF ( ibc_uv_t == 0 ) THEN
592	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
593	ELSE
594	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
595	ENDIF
596
597	IF ( ibc_pt_b == 0 ) THEN
598	runten = TRIM( runten ) // ' pt(0) = pt_surface'
599	ELSEIF ( ibc_pt_b == 1 ) THEN
600	runten = TRIM( runten ) // ' pt(0) = pt(1)'
601	ELSEIF ( ibc_pt_b == 2 ) THEN
602	runten = TRIM( runten ) // ' pt(0) = from coupled model'
603	ENDIF
604	IF ( ibc_pt_t == 0 ) THEN
605	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
606	ELSEIF( ibc_pt_t == 1 ) THEN
607	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
608	ELSEIF( ibc_pt_t == 2 ) THEN
609	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
610
611	ENDIF
612
613	WRITE ( io, 300 ) runten, roben
614
615	IF ( .NOT. constant_diffusion ) THEN
616	IF ( ibc_e_b == 1 ) THEN
617	runten = 'e(0) = e(1)'
618	ELSE
619	runten = 'e(0) = e(1) = (u/0.1)*2'
620	ENDIF
621	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
622
623	WRITE ( io, 301 ) 'e', runten, roben
624
625	ENDIF
626
627	IF ( ocean ) THEN
628	runten = 'sa(0) = sa(1)'
629	IF ( ibc_sa_t == 0 ) THEN
630	roben = 'sa(nzt+1) = sa_surface'
631	ELSE
632	roben = 'sa(nzt+1) = sa(nzt)'
633	ENDIF
634	WRITE ( io, 301 ) 'sa', runten, roben
635	ENDIF
636
637	IF ( humidity ) THEN
638	IF ( ibc_q_b == 0 ) THEN
639	runten = 'q(0) = q_surface'
640	ELSE
641	runten = 'q(0) = q(1)'
642	ENDIF
643	IF ( ibc_q_t == 0 ) THEN
644	roben = 'q(nzt) = q_top'
645	ELSE
646	roben = 'q(nzt) = q(nzt-1) + dq/dz'
647	ENDIF
648	WRITE ( io, 301 ) 'q', runten, roben
649	ENDIF
650
651	IF ( passive_scalar ) THEN
652	IF ( ibc_q_b == 0 ) THEN
653	runten = 's(0) = s_surface'
654	ELSE
655	runten = 's(0) = s(1)'
656	ENDIF
657	IF ( ibc_q_t == 0 ) THEN
658	roben = 's(nzt) = s_top'
659	ELSE
660	roben = 's(nzt) = s(nzt-1) + ds/dz'
661	ENDIF
662	WRITE ( io, 301 ) 's', runten, roben
663	ENDIF
664
665	IF ( use_surface_fluxes ) THEN
666	WRITE ( io, 303 )
667	IF ( constant_heatflux ) THEN
668	WRITE ( io, 306 ) surface_heatflux
669	IF ( random_heatflux ) WRITE ( io, 307 )
670	ENDIF
671	IF ( humidity .AND. constant_waterflux ) THEN
672	WRITE ( io, 311 ) surface_waterflux
673	ENDIF
674	IF ( passive_scalar .AND. constant_waterflux ) THEN
675	WRITE ( io, 313 ) surface_waterflux
676	ENDIF
677	ENDIF
678
679	IF ( use_top_fluxes ) THEN
680	WRITE ( io, 304 )
681	IF ( coupling_mode == 'uncoupled' ) THEN
682	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
683	IF ( constant_top_heatflux ) THEN
684	WRITE ( io, 306 ) top_heatflux
685	ENDIF
686	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
687	WRITE ( io, 316 )
688	ENDIF
689	IF ( ocean .AND. constant_top_salinityflux ) THEN
690	WRITE ( io, 309 ) top_salinityflux
691	ENDIF
692	IF ( humidity .OR. passive_scalar ) THEN
693	WRITE ( io, 315 )
694	ENDIF
695	ENDIF
696
697	IF ( prandtl_layer ) THEN
698	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
699	rif_min, rif_max
700	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
701	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
702	WRITE ( io, 312 )
703	ENDIF
704	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
705	WRITE ( io, 314 )
706	ENDIF
707	ELSE
708	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
709	WRITE ( io, 310 ) rif_min, rif_max
710	ENDIF
711	ENDIF
712
713	WRITE ( io, 317 ) bc_lr, bc_ns
714	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
715	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
716	IF ( turbulent_inflow ) THEN
717	WRITE ( io, 319 ) recycling_width, recycling_plane, &
718	inflow_damping_height, inflow_damping_width
719	ENDIF
720	ENDIF
721
722	!
723	!-- Listing of 1D-profiles
724	WRITE ( io, 325 ) dt_dopr_listing
725	IF ( averaging_interval_pr /= 0.0 ) THEN
726	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
727	ENDIF
728
729	!
730	!-- DATA output
731	WRITE ( io, 330 )
732	IF ( averaging_interval_pr /= 0.0 ) THEN
733	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
734	ENDIF
735
736	!
737	!-- 1D-profiles
738	dopr_chr = 'Profile:'
739	IF ( dopr_n /= 0 ) THEN
740	WRITE ( io, 331 )
741
742	output_format = ''
743	IF ( netcdf_output ) THEN
744	IF ( netcdf_data_format == 1 ) THEN
745	output_format = 'NetCDF classic'
746	ELSE
747	output_format = 'NetCDF 64bit offset'
748	ENDIF
749	ENDIF
750	IF ( profil_output ) THEN
751	IF ( netcdf_output ) THEN
752	output_format = TRIM( output_format ) // ' and profil'
753	ELSE
754	output_format = 'profil'
755	ENDIF
756	ENDIF
757	WRITE ( io, 344 ) output_format
758
759	DO i = 1, dopr_n
760	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
761	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
762	WRITE ( io, 332 ) dopr_chr
763	dopr_chr = ' :'
764	ENDIF
765	ENDDO
766
767	IF ( dopr_chr /= '' ) THEN
768	WRITE ( io, 332 ) dopr_chr
769	ENDIF
770	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
771	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
772	ENDIF
773
774	!
775	!-- 2D-arrays
776	DO av = 0, 1
777
778	i = 1
779	do2d_xy = ''
780	do2d_xz = ''
781	do2d_yz = ''
782	DO WHILE ( do2d(av,i) /= ' ' )
783
784	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
785	do2d_mode = do2d(av,i)(l-1:l)
786
787	SELECT CASE ( do2d_mode )
788	CASE ( 'xy' )
789	ll = LEN_TRIM( do2d_xy )
790	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
791	CASE ( 'xz' )
792	ll = LEN_TRIM( do2d_xz )
793	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
794	CASE ( 'yz' )
795	ll = LEN_TRIM( do2d_yz )
796	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
797	END SELECT
798
799	i = i + 1
800
801	ENDDO
802
803	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
804	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
805	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
806	( netcdf_output .OR. iso2d_output ) ) THEN
807
808	IF ( av == 0 ) THEN
809	WRITE ( io, 334 ) ''
810	ELSE
811	WRITE ( io, 334 ) '(time-averaged)'
812	ENDIF
813
814	IF ( do2d_at_begin ) THEN
815	begin_chr = 'and at the start'
816	ELSE
817	begin_chr = ''
818	ENDIF
819
820	output_format = ''
821	IF ( netcdf_output ) THEN
822	IF ( netcdf_data_format == 1 ) THEN
823	output_format = 'NetCDF classic'
824	ELSEIF ( netcdf_data_format == 2 ) THEN
825	output_format = 'NetCDF 64bit offset'
826	ELSEIF ( netcdf_data_format == 3 ) THEN
827	output_format = 'NetCDF4/HDF5'
828	ELSEIF ( netcdf_data_format == 4 ) THEN
829	output_format = 'NetCDF4/HDF5 clasic'
830	ENDIF
831	ENDIF
832	IF ( iso2d_output ) THEN
833	IF ( netcdf_output ) THEN
834	output_format = TRIM( output_format ) // ' and iso2d'
835	ELSE
836	output_format = 'iso2d'
837	ENDIF
838	ENDIF
839	WRITE ( io, 344 ) output_format
840
841	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
842	i = 1
843	slices = '/'
844	coordinates = '/'
845	!
846	!-- Building strings with index and coordinate informations of the
847	!-- slices
848	DO WHILE ( section(i,1) /= -9999 )
849
850	WRITE (section_chr,'(I5)') section(i,1)
851	section_chr = ADJUSTL( section_chr )
852	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
853
854	IF ( section(i,1) == -1 ) THEN
855	WRITE (coor_chr,'(F10.1)') -1.0
856	ELSE
857	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
858	ENDIF
859	coor_chr = ADJUSTL( coor_chr )
860	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
861
862	i = i + 1
863	ENDDO
864	IF ( av == 0 ) THEN
865	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
866	TRIM( begin_chr ), 'k', TRIM( slices ), &
867	TRIM( coordinates )
868	IF ( skip_time_do2d_xy /= 0.0 ) THEN
869	WRITE ( io, 339 ) skip_time_do2d_xy
870	ENDIF
871	ELSE
872	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
873	TRIM( begin_chr ), averaging_interval, &
874	dt_averaging_input, 'k', TRIM( slices ), &
875	TRIM( coordinates )
876	IF ( skip_time_data_output_av /= 0.0 ) THEN
877	WRITE ( io, 339 ) skip_time_data_output_av
878	ENDIF
879	ENDIF
880
881	ENDIF
882
883	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
884	i = 1
885	slices = '/'
886	coordinates = '/'
887	!
888	!-- Building strings with index and coordinate informations of the
889	!-- slices
890	DO WHILE ( section(i,2) /= -9999 )
891
892	WRITE (section_chr,'(I5)') section(i,2)
893	section_chr = ADJUSTL( section_chr )
894	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
895
896	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
897	coor_chr = ADJUSTL( coor_chr )
898	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
899
900	i = i + 1
901	ENDDO
902	IF ( av == 0 ) THEN
903	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
904	TRIM( begin_chr ), 'j', TRIM( slices ), &
905	TRIM( coordinates )
906	IF ( skip_time_do2d_xz /= 0.0 ) THEN
907	WRITE ( io, 339 ) skip_time_do2d_xz
908	ENDIF
909	ELSE
910	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
911	TRIM( begin_chr ), averaging_interval, &
912	dt_averaging_input, 'j', TRIM( slices ), &
913	TRIM( coordinates )
914	IF ( skip_time_data_output_av /= 0.0 ) THEN
915	WRITE ( io, 339 ) skip_time_data_output_av
916	ENDIF
917	ENDIF
918	ENDIF
919
920	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
921	i = 1
922	slices = '/'
923	coordinates = '/'
924	!
925	!-- Building strings with index and coordinate informations of the
926	!-- slices
927	DO WHILE ( section(i,3) /= -9999 )
928
929	WRITE (section_chr,'(I5)') section(i,3)
930	section_chr = ADJUSTL( section_chr )
931	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
932
933	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
934	coor_chr = ADJUSTL( coor_chr )
935	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
936
937	i = i + 1
938	ENDDO
939	IF ( av == 0 ) THEN
940	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
941	TRIM( begin_chr ), 'i', TRIM( slices ), &
942	TRIM( coordinates )
943	IF ( skip_time_do2d_yz /= 0.0 ) THEN
944	WRITE ( io, 339 ) skip_time_do2d_yz
945	ENDIF
946	ELSE
947	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
948	TRIM( begin_chr ), averaging_interval, &
949	dt_averaging_input, 'i', TRIM( slices ), &
950	TRIM( coordinates )
951	IF ( skip_time_data_output_av /= 0.0 ) THEN
952	WRITE ( io, 339 ) skip_time_data_output_av
953	ENDIF
954	ENDIF
955	ENDIF
956
957	ENDIF
958
959	ENDDO
960
961	!
962	!-- 3d-arrays
963	DO av = 0, 1
964
965	i = 1
966	do3d_chr = ''
967	DO WHILE ( do3d(av,i) /= ' ' )
968
969	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
970	i = i + 1
971
972	ENDDO
973
974	IF ( do3d_chr /= '' ) THEN
975	IF ( av == 0 ) THEN
976	WRITE ( io, 336 ) ''
977	ELSE
978	WRITE ( io, 336 ) '(time-averaged)'
979	ENDIF
980
981	output_format = ''
982	IF ( netcdf_output ) THEN
983	IF ( netcdf_data_format == 1 ) THEN
984	output_format = 'NetCDF classic'
985	ELSEIF ( netcdf_data_format == 2 ) THEN
986	output_format = 'NetCDF 64bit offset'
987	ELSEIF ( netcdf_data_format == 3 ) THEN
988	output_format = 'NetCDF4/HDF5'
989	ELSEIF ( netcdf_data_format == 4 ) THEN
990	output_format = 'NetCDF4/HDF5 clasic'
991	ENDIF
992	ENDIF
993	IF ( avs_output ) THEN
994	IF ( netcdf_output ) THEN
995	output_format = TRIM( output_format ) // ' and avs'
996	ELSE
997	output_format = 'avs'
998	ENDIF
999	ENDIF
1000	WRITE ( io, 344 ) output_format
1001
1002	IF ( do3d_at_begin ) THEN
1003	begin_chr = 'and at the start'
1004	ELSE
1005	begin_chr = ''
1006	ENDIF
1007	IF ( av == 0 ) THEN
1008	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1009	zu(nz_do3d), nz_do3d
1010	ELSE
1011	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1012	TRIM( begin_chr ), averaging_interval, &
1013	dt_averaging_input, zu(nz_do3d), nz_do3d
1014	ENDIF
1015
1016	IF ( do3d_compress ) THEN
1017	do3d_chr = ''
1018	i = 1
1019	DO WHILE ( do3d(av,i) /= ' ' )
1020
1021	SELECT CASE ( do3d(av,i) )
1022	CASE ( 'u' )
1023	j = 1
1024	CASE ( 'v' )
1025	j = 2
1026	CASE ( 'w' )
1027	j = 3
1028	CASE ( 'p' )
1029	j = 4
1030	CASE ( 'pt' )
1031	j = 5
1032	END SELECT
1033	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1034	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1035	':' // prec // ','
1036	i = i + 1
1037
1038	ENDDO
1039	WRITE ( io, 338 ) do3d_chr
1040
1041	ENDIF
1042
1043	IF ( av == 0 ) THEN
1044	IF ( skip_time_do3d /= 0.0 ) THEN
1045	WRITE ( io, 339 ) skip_time_do3d
1046	ENDIF
1047	ELSE
1048	IF ( skip_time_data_output_av /= 0.0 ) THEN
1049	WRITE ( io, 339 ) skip_time_data_output_av
1050	ENDIF
1051	ENDIF
1052
1053	ENDIF
1054
1055	ENDDO
1056
1057	!
1058	!-- masked arrays
1059	IF ( masks > 0 ) WRITE ( io, 345 ) &
1060	mask_scale_x, mask_scale_y, mask_scale_z
1061	DO mid = 1, masks
1062	DO av = 0, 1
1063
1064	i = 1
1065	domask_chr = ''
1066	DO WHILE ( domask(mid,av,i) /= ' ' )
1067	domask_chr = TRIM( domask_chr ) // ' ' // &
1068	TRIM( domask(mid,av,i) ) // ','
1069	i = i + 1
1070	ENDDO
1071
1072	IF ( domask_chr /= '' ) THEN
1073	IF ( av == 0 ) THEN
1074	WRITE ( io, 346 ) '', mid
1075	ELSE
1076	WRITE ( io, 346 ) ' (time-averaged)', mid
1077	ENDIF
1078
1079	output_format = ''
1080	IF ( netcdf_output ) THEN
1081	IF ( netcdf_data_format == 1 ) THEN
1082	output_format = 'NetCDF classic'
1083	ELSEIF ( netcdf_data_format == 2 ) THEN
1084	output_format = 'NetCDF 64bit offset'
1085	ELSEIF ( netcdf_data_format == 3 ) THEN
1086	output_format = 'NetCDF4/HDF5'
1087	ELSEIF ( netcdf_data_format == 4 ) THEN
1088	output_format = 'NetCDF4/HDF5 clasic'
1089	ENDIF
1090	ENDIF
1091	WRITE ( io, 344 ) output_format
1092
1093	IF ( av == 0 ) THEN
1094	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1095	ELSE
1096	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1097	averaging_interval, dt_averaging_input
1098	ENDIF
1099
1100	IF ( av == 0 ) THEN
1101	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1102	WRITE ( io, 339 ) skip_time_domask(mid)
1103	ENDIF
1104	ELSE
1105	IF ( skip_time_data_output_av /= 0.0 ) THEN
1106	WRITE ( io, 339 ) skip_time_data_output_av
1107	ENDIF
1108	ENDIF
1109	!
1110	!-- output locations
1111	DO dim = 1, 3
1112	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1113	count = 0
1114	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1115	count = count + 1
1116	ENDDO
1117	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1118	mask(mid,dim,:count)
1119	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1120	mask_loop(mid,dim,2) < 0.0 .AND. &
1121	mask_loop(mid,dim,3) == 0.0 ) THEN
1122	WRITE ( io, 350 ) dir(dim), dir(dim)
1123	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1124	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1125	mask_loop(mid,dim,1:2)
1126	ELSE
1127	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1128	mask_loop(mid,dim,1:3)
1129	ENDIF
1130	ENDDO
1131	ENDIF
1132
1133	ENDDO
1134	ENDDO
1135
1136	!
1137	!-- Timeseries
1138	IF ( dt_dots /= 9999999.9 ) THEN
1139	WRITE ( io, 340 )
1140
1141	output_format = ''
1142	IF ( netcdf_output ) THEN
1143	IF ( netcdf_data_format == 1 ) THEN
1144	output_format = 'NetCDF classic'
1145	ELSE
1146	output_format = 'NetCDF 64bit offset'
1147	ENDIF
1148	ENDIF
1149	IF ( profil_output ) THEN
1150	IF ( netcdf_output ) THEN
1151	output_format = TRIM( output_format ) // ' and profil'
1152	ELSE
1153	output_format = 'profil'
1154	ENDIF
1155	ENDIF
1156	WRITE ( io, 344 ) output_format
1157	WRITE ( io, 341 ) dt_dots
1158	ENDIF
1159
1160	#if defined( __dvrp_graphics )
1161	!
1162	!-- Dvrp-output
1163	IF ( dt_dvrp /= 9999999.9 ) THEN
1164	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1165	TRIM( dvrp_username ), TRIM( dvrp_directory )
1166	i = 1
1167	l = 0
1168	m = 0
1169	DO WHILE ( mode_dvrp(i) /= ' ' )
1170	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1171	READ ( mode_dvrp(i), '(10X,I2)' ) j
1172	l = l + 1
1173	IF ( do3d(0,j) /= ' ' ) THEN
1174	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1175	isosurface_color(:,l)
1176	ENDIF
1177	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1178	READ ( mode_dvrp(i), '(6X,I2)' ) j
1179	m = m + 1
1180	IF ( do2d(0,j) /= ' ' ) THEN
1181	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1182	slicer_range_limits_dvrp(:,m)
1183	ENDIF
1184	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1185	WRITE ( io, 363 ) dvrp_psize
1186	IF ( particle_dvrpsize /= 'none' ) THEN
1187	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1188	dvrpsize_interval
1189	ENDIF
1190	IF ( particle_color /= 'none' ) THEN
1191	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1192	color_interval
1193	ENDIF
1194	ENDIF
1195	i = i + 1
1196	ENDDO
1197
1198	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1199	superelevation_y, superelevation, clip_dvrp_l, &
1200	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1201
1202	IF ( TRIM( topography ) /= 'flat' ) THEN
1203	WRITE ( io, 366 ) topography_color
1204	IF ( cluster_size > 1 ) THEN
1205	WRITE ( io, 367 ) cluster_size
1206	ENDIF
1207	ENDIF
1208
1209	ENDIF
1210	#endif
1211
1212	#if defined( __spectra )
1213	!
1214	!-- Spectra output
1215	IF ( dt_dosp /= 9999999.9 ) THEN
1216	WRITE ( io, 370 )
1217
1218	output_format = ''
1219	IF ( netcdf_output ) THEN
1220	IF ( netcdf_data_format == 1 ) THEN
1221	output_format = 'NetCDF classic'
1222	ELSE
1223	output_format = 'NetCDF 64bit offset'
1224	ENDIF
1225	ENDIF
1226	IF ( profil_output ) THEN
1227	IF ( netcdf_output ) THEN
1228	output_format = TRIM( output_format ) // ' and profil'
1229	ELSE
1230	output_format = 'profil'
1231	ENDIF
1232	ENDIF
1233	WRITE ( io, 344 ) output_format
1234	WRITE ( io, 371 ) dt_dosp
1235	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1236	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1237	( spectra_direction(i), i = 1,10 ), &
1238	( comp_spectra_level(i), i = 1,100 ), &
1239	( plot_spectra_level(i), i = 1,100 ), &
1240	averaging_interval_sp, dt_averaging_input_pr
1241	ENDIF
1242	#endif
1243
1244	WRITE ( io, 99 )
1245
1246	!
1247	!-- Physical quantities
1248	WRITE ( io, 400 )
1249
1250	!
1251	!-- Geostrophic parameters
1252	WRITE ( io, 410 ) omega, phi, f, fs
1253
1254	!
1255	!-- Other quantities
1256	WRITE ( io, 411 ) g
1257	IF ( use_reference ) THEN
1258	IF ( ocean ) THEN
1259	WRITE ( io, 412 ) prho_reference
1260	ELSE
1261	WRITE ( io, 413 ) pt_reference
1262	ENDIF
1263	ENDIF
1264
1265	!
1266	!-- Cloud physics parameters
1267	IF ( cloud_physics ) THEN
1268	WRITE ( io, 415 )
1269	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1270	ENDIF
1271
1272	!-- Profile of the geostrophic wind (component ug)
1273	!-- Building output strings
1274	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1275	gradients = '------'
1276	slices = ' 0'
1277	coordinates = ' 0.0'
1278	i = 1
1279	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1280
1281	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1282	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1283
1284	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1285	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1286
1287	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1288	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1289
1290	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1291	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1292
1293	IF ( i == 10 ) THEN
1294	EXIT
1295	ELSE
1296	i = i + 1
1297	ENDIF
1298
1299	ENDDO
1300
1301	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1302	TRIM( gradients ), TRIM( slices )
1303
1304	!-- Profile of the geostrophic wind (component vg)
1305	!-- Building output strings
1306	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1307	gradients = '------'
1308	slices = ' 0'
1309	coordinates = ' 0.0'
1310	i = 1
1311	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1312
1313	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1314	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1315
1316	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1317	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1318
1319	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1320	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1321
1322	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1323	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1324
1325	IF ( i == 10 ) THEN
1326	EXIT
1327	ELSE
1328	i = i + 1
1329	ENDIF
1330
1331	ENDDO
1332
1333	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1334	TRIM( gradients ), TRIM( slices )
1335
1336	!
1337	!-- Initial wind profiles
1338	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1339
1340	!
1341	!-- Initial temperature profile
1342	!-- Building output strings, starting with surface temperature
1343	WRITE ( temperatures, '(F6.2)' ) pt_surface
1344	gradients = '------'
1345	slices = ' 0'
1346	coordinates = ' 0.0'
1347	i = 1
1348	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1349
1350	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1351	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1352
1353	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1354	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1355
1356	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1357	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1358
1359	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1360	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1361
1362	IF ( i == 10 ) THEN
1363	EXIT
1364	ELSE
1365	i = i + 1
1366	ENDIF
1367
1368	ENDDO
1369
1370	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1371	TRIM( gradients ), TRIM( slices )
1372
1373	!
1374	!-- Initial humidity profile
1375	!-- Building output strings, starting with surface humidity
1376	IF ( humidity .OR. passive_scalar ) THEN
1377	WRITE ( temperatures, '(E8.1)' ) q_surface
1378	gradients = '--------'
1379	slices = ' 0'
1380	coordinates = ' 0.0'
1381	i = 1
1382	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1383
1384	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1385	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1386
1387	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1388	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1389
1390	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1391	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1392
1393	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1394	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1395
1396	IF ( i == 10 ) THEN
1397	EXIT
1398	ELSE
1399	i = i + 1
1400	ENDIF
1401
1402	ENDDO
1403
1404	IF ( humidity ) THEN
1405	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1406	TRIM( gradients ), TRIM( slices )
1407	ELSE
1408	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1409	TRIM( gradients ), TRIM( slices )
1410	ENDIF
1411	ENDIF
1412
1413	!
1414	!-- Initial salinity profile
1415	!-- Building output strings, starting with surface salinity
1416	IF ( ocean ) THEN
1417	WRITE ( temperatures, '(F6.2)' ) sa_surface
1418	gradients = '------'
1419	slices = ' 0'
1420	coordinates = ' 0.0'
1421	i = 1
1422	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1423
1424	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1425	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1426
1427	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1428	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1429
1430	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1431	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1432
1433	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1434	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1435
1436	IF ( i == 10 ) THEN
1437	EXIT
1438	ELSE
1439	i = i + 1
1440	ENDIF
1441
1442	ENDDO
1443
1444	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1445	TRIM( gradients ), TRIM( slices )
1446	ENDIF
1447
1448	!
1449	!-- Profile for the large scale vertial velocity
1450	!-- Building output strings, starting with surface value
1451	IF ( large_scale_subsidence ) THEN
1452	temperatures = ' 0.0'
1453	gradients = '------'
1454	slices = ' 0'
1455	coordinates = ' 0.0'
1456	i = 1
1457	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1458
1459	WRITE (coor_chr,'(E10.2,7X)') &
1460	w_subs(subs_vertical_gradient_level_i(i))
1461	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1462
1463	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1464	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1465
1466	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1467	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1468
1469	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1470	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1471
1472	IF ( i == 10 ) THEN
1473	EXIT
1474	ELSE
1475	i = i + 1
1476	ENDIF
1477
1478	ENDDO
1479
1480	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1481	TRIM( gradients ), TRIM( slices )
1482	ENDIF
1483
1484	!
1485	!-- Cloud physcis parameters / quantities / numerical methods
1486	WRITE ( io, 430 )
1487	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1488	WRITE ( io, 431 )
1489	ELSEIF ( humidity .AND. cloud_physics ) THEN
1490	WRITE ( io, 432 )
1491	IF ( radiation ) WRITE ( io, 132 )
1492	IF ( precipitation ) WRITE ( io, 133 )
1493	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1494	WRITE ( io, 433 )
1495	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1496	IF ( collision_kernel /= 'none' ) THEN
1497	WRITE ( io, 435 ) TRIM( collision_kernel )
1498	IF ( collision_kernel(6:9) == 'fast' ) THEN
1499	WRITE ( io, 436 ) radius_classes, dissipation_classes
1500	ENDIF
1501	ELSE
1502	WRITE ( io, 437 )
1503	ENDIF
1504	ENDIF
1505
1506	!
1507	!-- LES / turbulence parameters
1508	WRITE ( io, 450 )
1509
1510	!--
1511	! ... LES-constants used must still be added here
1512	!--
1513	IF ( constant_diffusion ) THEN
1514	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1515	prandtl_number
1516	ENDIF
1517	IF ( .NOT. constant_diffusion) THEN
1518	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1519	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1520	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1521	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1522	ENDIF
1523
1524	!
1525	!-- Special actions during the run
1526	WRITE ( io, 470 )
1527	IF ( create_disturbances ) THEN
1528	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1529	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1530	zu(disturbance_level_ind_t), disturbance_level_ind_t
1531	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1532	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1533	ELSE
1534	WRITE ( io, 473 ) disturbance_energy_limit
1535	ENDIF
1536	WRITE ( io, 474 ) TRIM( random_generator )
1537	ENDIF
1538	IF ( pt_surface_initial_change /= 0.0 ) THEN
1539	WRITE ( io, 475 ) pt_surface_initial_change
1540	ENDIF
1541	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1542	WRITE ( io, 476 ) q_surface_initial_change
1543	ENDIF
1544	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1545	WRITE ( io, 477 ) q_surface_initial_change
1546	ENDIF
1547
1548	IF ( particle_advection ) THEN
1549	!
1550	!-- Particle attributes
1551	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1552	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1553	end_time_prel, dt_sort_particles
1554	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1555	IF ( random_start_position ) WRITE ( io, 481 )
1556	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1557	WRITE ( io, 495 ) total_number_of_particles
1558	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1559	WRITE ( io, 483 ) maximum_number_of_tailpoints
1560	IF ( minimum_tailpoint_distance /= 0 ) THEN
1561	WRITE ( io, 484 ) total_number_of_tails, &
1562	minimum_tailpoint_distance, &
1563	maximum_tailpoint_age
1564	ENDIF
1565	ENDIF
1566	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1567	WRITE ( io, 485 ) dt_write_particle_data
1568	output_format = ''
1569	IF ( netcdf_output ) THEN
1570	IF ( netcdf_data_format > 1 ) THEN
1571	output_format = 'netcdf (64 bit offset) and binary'
1572	ELSE
1573	output_format = 'netcdf and binary'
1574	ENDIF
1575	ELSE
1576	output_format = 'binary'
1577	ENDIF
1578	WRITE ( io, 344 ) output_format
1579	ENDIF
1580	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1581	IF ( write_particle_statistics ) WRITE ( io, 486 )
1582
1583	WRITE ( io, 487 ) number_of_particle_groups
1584
1585	DO i = 1, number_of_particle_groups
1586	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1587	WRITE ( io, 490 ) i, 0.0
1588	WRITE ( io, 492 )
1589	ELSE
1590	WRITE ( io, 490 ) i, radius(i)
1591	IF ( density_ratio(i) /= 0.0 ) THEN
1592	WRITE ( io, 491 ) density_ratio(i)
1593	ELSE
1594	WRITE ( io, 492 )
1595	ENDIF
1596	ENDIF
1597	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1598	pdx(i), pdy(i), pdz(i)
1599	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1600	ENDDO
1601
1602	ENDIF
1603
1604
1605	!
1606	!-- Parameters of 1D-model
1607	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1608	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1609	mixing_length_1d, dissipation_1d
1610	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1611	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1612	ENDIF
1613	ENDIF
1614
1615	!
1616	!-- User-defined informations
1617	CALL user_header( io )
1618
1619	WRITE ( io, 99 )
1620
1621	!
1622	!-- Write buffer contents to disc immediately
1623	CALL local_flush( io )
1624
1625	!
1626	!-- Here the FORMATs start
1627
1628	99 FORMAT (1X,78('-'))
1629	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1630	1X,'* ',A,' *',9X,A/ &
1631	1X,'***************************',9X,42('-'))
1632	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1633	37X,42('-'))
1634	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1635	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1636	' Run on host: ',A10)
1637	#if defined( __parallel )
1638	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1639	')',1X,A)
1640	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1641	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1642	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1643	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1644	37X,'because the job is running on an SMP-cluster')
1645	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1646	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1647	#endif
1648	110 FORMAT (/' Numerical Schemes:'/ &
1649	' -----------------'/)
1650	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1651	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1652	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1653	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1654	' or Upstream')
1655	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1656	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1657	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1658	' or Upstream')
1659	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1660	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1661	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1662	' Translation velocity = ',A/ &
1663	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1664	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1665	' of timestep changes)')
1666	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1667	' timestep changes')
1668	122 FORMAT (' --> Time differencing scheme: ',A)
1669	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1670	' maximum damping coefficient: ',F5.3, ' 1/s')
1671	124 FORMAT (' Spline-overshoots are being suppressed')
1672	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1673	' of'/ &
1674	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1675	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1676	' of'/ &
1677	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1678	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1679	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1680	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1681	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1682	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1683	130 FORMAT (' --> Additional prognostic equation for the total water content')
1684	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1685	' effective emissivity scheme')
1686	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1687	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1688	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1689	A,'-cycle)'/ &
1690	' number of grid levels: ',I2/ &
1691	' Gauss-Seidel red/black iterations: ',I2)
1692	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1693	I3,')')
1694	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1695	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1696	I3,')'/ &
1697	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1698	I3,')')
1699	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1700	139 FORMAT (' --> Loop optimization method: ',A)
1701	140 FORMAT (' maximum residual allowed: ',E10.3)
1702	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1703	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1704	'step')
1705	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1706	'kinetic energy')
1707	144 FORMAT (' masking method is used')
1708	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1709	'conserved'/ &
1710	' using the ',A,' mode')
1711	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1712	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1713	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1714	/' starting from dp_level_b =', F8.3, 'm', A /)
1715	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1716	'prognostic equation for')
1717	154 FORMAT (' the potential temperature')
1718	200 FORMAT (//' Run time and time step information:'/ &
1719	' ----------------------------------'/)
1720	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1721	' CFL-factor: ',F4.2)
1722	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1723	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1724	' End time: ',F9.3,' s')
1725	204 FORMAT ( A,F9.3,' s')
1726	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1727	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1728	' CPU-time used: ',F9.3,' s per timestep: ', &
1729	' ',F9.3,' s'/ &
1730	' per second of simulated tim', &
1731	'e: ',F9.3,' s')
1732	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1733	250 FORMAT (//' Computational grid and domain size:'/ &
1734	' ----------------------------------'// &
1735	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1736	' m dz = ',F7.3,' m'/ &
1737	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1738	' m z(u) = ',F10.3,' m'/)
1739	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1740	' factor: ',F5.3/ &
1741	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1742	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1743	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1744	255 FORMAT (' Subdomains have equal size')
1745	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1746	'have smaller sizes'/ &
1747	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1748	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1749	' degrees')
1750	270 FORMAT (//' Topography informations:'/ &
1751	' -----------------------'// &
1752	1X,'Topography: ',A)
1753	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1754	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1755	' / ',I4)
1756	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1757	' direction' / &
1758	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1759	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1760	278 FORMAT (' Topography grid definition convention:'/ &
1761	' cell edge (staggered grid points'/ &
1762	' (u in x-direction, v in y-direction))' /)
1763	279 FORMAT (' Topography grid definition convention:'/ &
1764	' cell center (scalar grid points)' /)
1765	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1766	' ------------------------------'// &
1767	' Canopy mode: ', A / &
1768	' Canopy top: ',I4 / &
1769	' Leaf drag coefficient: ',F6.2 /)
1770	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1771	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1772	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1773	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1774	' Height: ',A,' m'/ &
1775	' Leaf area density: ',A,' m2/m3'/ &
1776	' Gradient: ',A,' m2/m4'/ &
1777	' Gridpoint: ',A)
1778
1779	300 FORMAT (//' Boundary conditions:'/ &
1780	' -------------------'// &
1781	' p uv ', &
1782	' pt'// &
1783	' B. bound.: ',A/ &
1784	' T. bound.: ',A)
1785	301 FORMAT (/' ',A// &
1786	' B. bound.: ',A/ &
1787	' T. bound.: ',A)
1788	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1789	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1790	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1791	'computational u,v-level:'// &
1792	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1793	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1794	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1795	307 FORMAT (' Heatflux has a random normal distribution')
1796	308 FORMAT (' Predefined surface temperature')
1797	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1798	310 FORMAT (//' 1D-Model:'// &
1799	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1800	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1801	312 FORMAT (' Predefined surface humidity')
1802	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1803	314 FORMAT (' Predefined scalar value at the surface')
1804	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1805	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1806	'atmosphere model')
1807	317 FORMAT (//' Lateral boundaries:'/ &
1808	' left/right: ',A/ &
1809	' north/south: ',A)
1810	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1811	'max =',F5.1,' m**2/s')
1812	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1813	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1814	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1815	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1816	' v: ',F9.6,' m2/s2')
1817	325 FORMAT (//' List output:'/ &
1818	' -----------'// &
1819	' 1D-Profiles:'/ &
1820	' Output every ',F8.2,' s')
1821	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1822	' Averaging input every ',F8.2,' s')
1823	330 FORMAT (//' Data output:'/ &
1824	' -----------'/)
1825	331 FORMAT (/' 1D-Profiles:')
1826	332 FORMAT (/' ',A)
1827	333 FORMAT (' Output every ',F8.2,' s',/ &
1828	' Time averaged over ',F8.2,' s'/ &
1829	' Averaging input every ',F8.2,' s')
1830	334 FORMAT (/' 2D-Arrays',A,':')
1831	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1832	' Output every ',F8.2,' s ',A/ &
1833	' Cross sections at ',A1,' = ',A/ &
1834	' scalar-coordinates: ',A,' m'/)
1835	336 FORMAT (/' 3D-Arrays',A,':')
1836	337 FORMAT (/' Arrays: ',A/ &
1837	' Output every ',F8.2,' s ',A/ &
1838	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1839	338 FORMAT (' Compressed data output'/ &
1840	' Decimal precision: ',A/)
1841	339 FORMAT (' No output during initial ',F8.2,' s')
1842	340 FORMAT (/' Time series:')
1843	341 FORMAT (' Output every ',F8.2,' s'/)
1844	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1845	' Output every ',F8.2,' s ',A/ &
1846	' Time averaged over ',F8.2,' s'/ &
1847	' Averaging input every ',F8.2,' s'/ &
1848	' Cross sections at ',A1,' = ',A/ &
1849	' scalar-coordinates: ',A,' m'/)
1850	343 FORMAT (/' Arrays: ',A/ &
1851	' Output every ',F8.2,' s ',A/ &
1852	' Time averaged over ',F8.2,' s'/ &
1853	' Averaging input every ',F8.2,' s'/ &
1854	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1855	344 FORMAT (' Output format: ',A/)
1856	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1857	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1858	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1859	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1860	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1861	347 FORMAT (' Variables: ',A/ &
1862	' Output every ',F8.2,' s')
1863	348 FORMAT (' Variables: ',A/ &
1864	' Output every ',F8.2,' s'/ &
1865	' Time averaged over ',F8.2,' s'/ &
1866	' Averaging input every ',F8.2,' s')
1867	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1868	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1869	13(' ',8(F8.2,',')/) )
1870	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1871	'all gridpoints along ',A,'-direction (default).' )
1872	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1873	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1874	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1875	#if defined( __dvrp_graphics )
1876	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1877	' Output every ',F7.1,' s'/ &
1878	' Output mode: ',A/ &
1879	' Host / User: ',A,' / ',A/ &
1880	' Directory: ',A// &
1881	' The sequence contains:')
1882	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1883	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1884	362 FORMAT (/' Slicer plane ',A/ &
1885	' Slicer limits: [',F6.2,',',F6.2,']')
1886	363 FORMAT (/' Particles'/ &
1887	' particle size: ',F7.2,' m')
1888	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1889	F6.2,',',F6.2,']')
1890	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1891	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1892	')'/ &
1893	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1894	' from y = ',F9.1,' m to y = ',F9.1,' m')
1895	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1896	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1897	#endif
1898	#if defined( __spectra )
1899	370 FORMAT (' Spectra:')
1900	371 FORMAT (' Output every ',F7.1,' s'/)
1901	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1902	' Directions: ', 10(A5,',')/ &
1903	' height levels k = ', 20(I3,',')/ &
1904	' ', 20(I3,',')/ &
1905	' ', 20(I3,',')/ &
1906	' ', 20(I3,',')/ &
1907	' ', 19(I3,','),I3,'.'/ &
1908	' height levels selected for standard plot:'/ &
1909	' k = ', 20(I3,',')/ &
1910	' ', 20(I3,',')/ &
1911	' ', 20(I3,',')/ &
1912	' ', 20(I3,',')/ &
1913	' ', 19(I3,','),I3,'.'/ &
1914	' Time averaged over ', F7.1, ' s,' / &
1915	' Profiles for the time averaging are taken every ', &
1916	F6.1,' s')
1917	#endif
1918	400 FORMAT (//' Physical quantities:'/ &
1919	' -------------------'/)
1920	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1921	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1922	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1923	' f* = ',F9.6,' 1/s')
1924	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1925	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1926	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1927	415 FORMAT (/' Cloud physics parameters:'/ &
1928	' ------------------------'/)
1929	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1930	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1931	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1932	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1933	' Vapourization heat : L_v = ',E8.2,' J/kg')
1934	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1935	' Height: ',A,' m'/ &
1936	' Temperature: ',A,' K'/ &
1937	' Gradient: ',A,' K/100m'/ &
1938	' Gridpoint: ',A)
1939	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1940	' Height: ',A,' m'/ &
1941	' Humidity: ',A,' kg/kg'/ &
1942	' Gradient: ',A,' (kg/kg)/100m'/ &
1943	' Gridpoint: ',A)
1944	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1945	' Height: ',A,' m'/ &
1946	' Scalar concentration: ',A,' kg/m**3'/ &
1947	' Gradient: ',A,' (kg/m**3)/100m'/ &
1948	' Gridpoint: ',A)
1949	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1950	' Height: ',A,' m'/ &
1951	' ug: ',A,' m/s'/ &
1952	' Gradient: ',A,' 1/100s'/ &
1953	' Gridpoint: ',A)
1954	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1955	' Height: ',A,' m'/ &
1956	' vg: ',A,' m/s'/ &
1957	' Gradient: ',A,' 1/100s'/ &
1958	' Gridpoint: ',A)
1959	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1960	' Height: ',A,' m'/ &
1961	' Salinity: ',A,' psu'/ &
1962	' Gradient: ',A,' psu/100m'/ &
1963	' Gridpoint: ',A)
1964	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1965	' Height: ',A,' m'/ &
1966	' w_subs: ',A,' m/s'/ &
1967	' Gradient: ',A,' (m/s)/100m'/ &
1968	' Gridpoint: ',A)
1969	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1970	' profiles')
1971	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1972	' ----------------------------------'/)
1973	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1974	'on)')
1975	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1976	' total water content is used.'/ &
1977	' Condensation is parameterized via 0% - or 100% scheme.')
1978	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1979	'icle model')
1980	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1981	' droplets < 1.0E-6 m')
1982	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1983	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1984	'are used'/ &
1985	' number of radius classes: ',I3,' interval ', &
1986	'[1.0E-6,2.0E-4] m'/ &
1987	' number of dissipation classes: ',I2,' interval ', &
1988	'[0,1000] cm2/s3')
1989	437 FORMAT (' Droplet collision is switched off')
1990	450 FORMAT (//' LES / Turbulence quantities:'/ &
1991	' ---------------------------'/)
1992	451 FORMAT (' Diffusion coefficients are constant:'/ &
1993	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1994	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1995	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1996	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1997	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1998	470 FORMAT (//' Actions during the simulation:'/ &
1999	' -----------------------------'/)
2000	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
2001	' Disturbance amplitude : ',F4.2, ' m/s'/ &
2002	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
2003	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
2004	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2005	' to i/j =',I4)
2006	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2007	1X,F5.3, ' m2/s2')
2008	474 FORMAT (' Random number generator used : ',A/)
2009	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2010	'respectively, if'/ &
2011	' the value is negative) by ',F5.2,' K at the beginning of the',&
2012	' 3D-simulation'/)
2013	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2014	'respectively, if the'/ &
2015	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2016	' the 3D-simulation'/)
2017	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2018	'respectively, if the'/ &
2019	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2020	' the 3D-simulation'/)
2021	480 FORMAT (' Particles:'/ &
2022	' ---------'// &
2023	' Particle advection is active (switched on at t = ', F7.1, &
2024	' s)'/ &
2025	' Start of new particle generations every ',F6.1,' s'/ &
2026	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2027	' bottom: ', A, ' top: ', A/&
2028	' Maximum particle age: ',F9.1,' s'/ &
2029	' Advection stopped at t = ',F9.1,' s'/ &
2030	' Particles are sorted every ',F9.1,' s'/)
2031	481 FORMAT (' Particles have random start positions'/)
2032	482 FORMAT (' Particles are advected only horizontally'/)
2033	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2034	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2035	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2036	' Maximum age of the end of the tail: ',F8.2,' s')
2037	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2038	486 FORMAT (' Particle statistics are written on file'/)
2039	487 FORMAT (' Number of particle groups: ',I2/)
2040	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2041	' minimum timestep for advection: ', F7.5/)
2042	489 FORMAT (' Number of particles simultaneously released at each ', &
2043	'point: ', I5/)
2044	490 FORMAT (' Particle group ',I2,':'/ &
2045	' Particle radius: ',E10.3, 'm')
2046	491 FORMAT (' Particle inertia is activated'/ &
2047	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2048	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2049	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2050	' y:',F8.1,' - ',F8.1,' m'/&
2051	' z:',F8.1,' - ',F8.1,' m'/&
2052	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2053	' m dz = ',F8.1,' m'/)
2054	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2055	F8.2,' s'/)
2056	495 FORMAT (' Number of particles in total domain: ',I10/)
2057	500 FORMAT (//' 1D-Model parameters:'/ &
2058	' -------------------'// &
2059	' Simulation time: ',F8.1,' s'/ &
2060	' Run-controll output every: ',F8.1,' s'/ &
2061	' Vertical profile output every: ',F8.1,' s'/ &
2062	' Mixing length calculation: ',A/ &
2063	' Dissipation calculation: ',A/)
2064	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2065	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2066	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2067
2068
2069	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |