Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 856

Last change on this file since 856 was 834, checked in by maronga, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.6 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 834 2012-02-22 08:57:06Z suehring $
11	!
12	! 833 2012-02-22 08:55:55Z maronga
13	! Adjusted format for leaf area density
14	!
15	! 828 2012-02-21 12:00:36Z raasch
16	! output of dissipation_classes + radius_classes
17	!
18	! 825 2012-02-19 03:03:44Z raasch
19	! Output of cloud physics parameters/quantities complemented and restructured
20	!
21	! 767 2011-10-14 06:39:12Z raasch
22	! Output of given initial u,v-profiles
23	!
24	! 759 2011-09-15 13:58:31Z raasch
25	! output of maximum number of parallel io streams
26	!
27	! 707 2011-03-29 11:39:40Z raasch
28	! bc_lr/ns replaced by bc_lr/ns_cyc
29	!
30	! 667 2010-12-23 12:06:00Z suehring/gryschka
31	! Output of advection scheme.
32	! Modified output of Prandtl-layer height.
33	!
34	! 580 2010-10-05 13:59:11Z heinze
35	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
36	! ws_vertical_gradient_level to subs_vertical_gradient_level and
37	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
38	!
39	! 493 2010-03-01 08:30:24Z raasch
40	! NetCDF data output format extendend for NetCDF4/HDF5
41	!
42	! 449 2010-02-02 11:23:59Z raasch
43	! +large scale vertical motion (subsidence/ascent)
44	! Bugfix: index problem concerning gradient_level indices removed
45	!
46	! 410 2009-12-04 17:05:40Z letzel
47	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
48	! mask_scale\|_x\|y\|z, masks, skip_time_domask
49	!
50	! 346 2009-07-06 10:13:41Z raasch
51	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
52	! Coupling with independent precursor runs.
53	! Output of messages replaced by message handling routine.
54	! Output of several additional dvr parameters
55	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
56	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
57	! dp_smooth, dpdxy, u_bulk, v_bulk
58	! topography_grid_convention moved from user_header
59	! small bugfix concerning 3d 64bit netcdf output format
60	!
61	! 206 2008-10-13 14:59:11Z raasch
62	! Bugfix: error in zu index in case of section_xy = -1
63	!
64	! 198 2008-09-17 08:55:28Z raasch
65	! Format adjustments allowing output of larger revision numbers
66	!
67	! 197 2008-09-16 15:29:03Z raasch
68	! allow 100 spectra levels instead of 10 for consistency with
69	! define_netcdf_header,
70	! bugfix in the output of the characteristic levels of potential temperature,
71	! geostrophic wind, scalar concentration, humidity and leaf area density,
72	! output of turbulence recycling informations
73	!
74	! 138 2007-11-28 10:03:58Z letzel
75	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
76	! Allow two instead of one digit to specify isosurface and slicer variables.
77	! Output of sorting frequency of particles
78	!
79	! 108 2007-08-24 15:10:38Z letzel
80	! Output of informations for coupled model runs (boundary conditions etc.)
81	! + output of momentumfluxes at the top boundary
82	! Rayleigh damping for ocean, e_init
83	!
84	! 97 2007-06-21 08:23:15Z raasch
85	! Adjustments for the ocean version.
86	! use_pt_reference renamed use_reference
87	!
88	! 87 2007-05-22 15:46:47Z raasch
89	! Bugfix: output of use_upstream_for_tke
90	!
91	! 82 2007-04-16 15:40:52Z raasch
92	! Preprocessor strings for different linux clusters changed to "lc",
93	! routine local_flush is used for buffer flushing
94	!
95	! 76 2007-03-29 00:58:32Z raasch
96	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
97	! output of the loop optimization method, moisture renamed humidity,
98	! output of subversion revision number
99	!
100	! 19 2007-02-23 04:53:48Z raasch
101	! Output of scalar flux applied at top boundary
102	!
103	! RCS Log replace by Id keyword, revision history cleaned up
104	!
105	! Revision 1.63 2006/08/22 13:53:13 raasch
106	! Output of dz_max
107	!
108	! Revision 1.1 1997/08/11 06:17:20 raasch
109	! Initial revision
110	!
111	!
112	! Description:
113	! ------------
114	! Writing a header with all important informations about the actual run.
115	! This subroutine is called three times, two times at the beginning
116	! (writing information on files RUN_CONTROL and HEADER) and one time at the
117	! end of the run, then writing additional information about CPU-usage on file
118	! header.
119	!-----------------------------------------------------------------------------!
120
121	USE arrays_3d
122	USE control_parameters
123	USE cloud_parameters
124	USE cpulog
125	USE dvrp_variables
126	USE grid_variables
127	USE indices
128	USE model_1d
129	USE particle_attributes
130	USE pegrid
131	USE subsidence_mod
132	USE spectrum
133
134	IMPLICIT NONE
135
136	CHARACTER (LEN=1) :: prec
137	CHARACTER (LEN=2) :: do2d_mode
138	CHARACTER (LEN=5) :: section_chr
139	CHARACTER (LEN=9) :: time_to_string
140	CHARACTER (LEN=10) :: coor_chr, host_chr
141	CHARACTER (LEN=16) :: begin_chr
142	CHARACTER (LEN=23) :: ver_rev
143	CHARACTER (LEN=40) :: output_format
144	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
145	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
146	domask_chr, run_classification
147	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
148	temperatures, ugcomponent, vgcomponent
149	CHARACTER (LEN=85) :: roben, runten
150
151	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
152
153	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
154	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
155	REAL :: cpuseconds_per_simulated_second
156
157	!
158	!-- Open the output file. At the end of the simulation, output is directed
159	!-- to unit 19.
160	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
161	.NOT. simulated_time_at_begin /= simulated_time ) THEN
162	io = 15 ! header output on file RUN_CONTROL
163	ELSE
164	io = 19 ! header output on file HEADER
165	ENDIF
166	CALL check_open( io )
167
168	!
169	!-- At the end of the run, output file (HEADER) will be rewritten with
170	!-- new informations
171	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
172
173	!
174	!-- Determine kind of model run
175	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
176	run_classification = '3D - restart run'
177	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
178	run_classification = '3D - run with cyclic fill of 3D - prerun data'
179	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
180	run_classification = '3D - run without 1D - prerun'
181	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
182	run_classification = '3D - run with 1D - prerun'
183	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
184	run_classification = '3D - run initialized by user'
185	ELSE
186	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
187	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
188	ENDIF
189	IF ( ocean ) THEN
190	run_classification = 'ocean - ' // run_classification
191	ELSE
192	run_classification = 'atmosphere - ' // run_classification
193	ENDIF
194
195	!
196	!-- Run-identification, date, time, host
197	host_chr = host(1:10)
198	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
199	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
200	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
201	#if defined( __mpi2 )
202	mpi_type = 2
203	#else
204	mpi_type = 1
205	#endif
206	WRITE ( io, 101 ) mpi_type, coupling_mode
207	ENDIF
208	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
209	ADJUSTR( host_chr )
210	#if defined( __parallel )
211	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
212	char1 = 'calculated'
213	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
214	host(1:2) == 'lc' ) .AND. &
215	npex == -1 .AND. pdims(2) == 1 ) THEN
216	char1 = 'forced'
217	ELSE
218	char1 = 'predefined'
219	ENDIF
220	IF ( threads_per_task == 1 ) THEN
221	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
222	ELSE
223	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
224	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
225	ENDIF
226	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
227	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
228	npex == -1 .AND. pdims(2) == 1 ) &
229	THEN
230	WRITE ( io, 106 )
231	ELSEIF ( pdims(2) == 1 ) THEN
232	WRITE ( io, 107 ) 'x'
233	ELSEIF ( pdims(1) == 1 ) THEN
234	WRITE ( io, 107 ) 'y'
235	ENDIF
236	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
237	IF ( numprocs /= maximum_parallel_io_streams ) THEN
238	WRITE ( io, 108 ) maximum_parallel_io_streams
239	ENDIF
240	#endif
241	WRITE ( io, 99 )
242
243	!
244	!-- Numerical schemes
245	WRITE ( io, 110 )
246	IF ( psolver(1:7) == 'poisfft' ) THEN
247	WRITE ( io, 111 ) TRIM( fft_method )
248	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
249	ELSEIF ( psolver == 'sor' ) THEN
250	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
251	ELSEIF ( psolver == 'multigrid' ) THEN
252	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
253	IF ( mg_cycles == -1 ) THEN
254	WRITE ( io, 140 ) residual_limit
255	ELSE
256	WRITE ( io, 141 ) mg_cycles
257	ENDIF
258	IF ( mg_switch_to_pe0_level == 0 ) THEN
259	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
260	nzt_mg(1)
261	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
262	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
263	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
264	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
265	nzt_mg(mg_switch_to_pe0_level), &
266	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
267	nzt_mg(1)
268	ENDIF
269	ENDIF
270	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
271	THEN
272	WRITE ( io, 142 )
273	ENDIF
274
275	IF ( momentum_advec == 'pw-scheme' ) THEN
276	WRITE ( io, 113 )
277	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
278	WRITE ( io, 503 )
279	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
280	WRITE ( io, 114 )
281	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
282	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
283	overshoot_limit_w /= 0.0 ) THEN
284	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
285	overshoot_limit_w
286	ENDIF
287	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
288	ups_limit_w /= 0.0 ) &
289	THEN
290	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
291	ENDIF
292	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
293	ENDIF
294	IF ( scalar_advec == 'pw-scheme' ) THEN
295	WRITE ( io, 116 )
296	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
297	WRITE ( io, 504 )
298	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
299	WRITE ( io, 117 )
300	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
301	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
302	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
303	ENDIF
304	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
305	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
306	ENDIF
307	ELSE
308	WRITE ( io, 118 )
309	ENDIF
310
311	WRITE ( io, 139 ) TRIM( loop_optimization )
312
313	IF ( galilei_transformation ) THEN
314	IF ( use_ug_for_galilei_tr ) THEN
315	char1 = 'geostrophic wind'
316	ELSE
317	char1 = 'mean wind in model domain'
318	ENDIF
319	IF ( simulated_time_at_begin == simulated_time ) THEN
320	char2 = 'at the start of the run'
321	ELSE
322	char2 = 'at the end of the run'
323	ENDIF
324	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
325	advected_distance_x/1000.0, advected_distance_y/1000.0
326	ENDIF
327	IF ( timestep_scheme == 'leapfrog' ) THEN
328	WRITE ( io, 120 )
329	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
330	WRITE ( io, 121 )
331	ELSE
332	WRITE ( io, 122 ) timestep_scheme
333	ENDIF
334	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
335	IF ( rayleigh_damping_factor /= 0.0 ) THEN
336	IF ( .NOT. ocean ) THEN
337	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
338	rayleigh_damping_factor
339	ELSE
340	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
341	rayleigh_damping_factor
342	ENDIF
343	ENDIF
344	IF ( humidity ) THEN
345	IF ( .NOT. cloud_physics ) THEN
346	WRITE ( io, 129 )
347	ELSE
348	WRITE ( io, 130 )
349	ENDIF
350	ENDIF
351	IF ( passive_scalar ) WRITE ( io, 134 )
352	IF ( conserve_volume_flow ) THEN
353	WRITE ( io, 150 ) conserve_volume_flow_mode
354	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
355	WRITE ( io, 151 ) u_bulk, v_bulk
356	ENDIF
357	ELSEIF ( dp_external ) THEN
358	IF ( dp_smooth ) THEN
359	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
360	ELSE
361	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
362	ENDIF
363	ENDIF
364	IF ( large_scale_subsidence ) THEN
365	WRITE ( io, 153 )
366	WRITE ( io, 154 )
367	ENDIF
368	WRITE ( io, 99 )
369
370	!
371	!-- Runtime and timestep informations
372	WRITE ( io, 200 )
373	IF ( .NOT. dt_fixed ) THEN
374	WRITE ( io, 201 ) dt_max, cfl_factor
375	ELSE
376	WRITE ( io, 202 ) dt
377	ENDIF
378	WRITE ( io, 203 ) simulated_time_at_begin, end_time
379
380	IF ( time_restart /= 9999999.9 .AND. &
381	simulated_time_at_begin == simulated_time ) THEN
382	IF ( dt_restart == 9999999.9 ) THEN
383	WRITE ( io, 204 ) ' Restart at: ',time_restart
384	ELSE
385	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
386	ENDIF
387	ENDIF
388
389	IF ( simulated_time_at_begin /= simulated_time ) THEN
390	i = MAX ( log_point_s(10)%counts, 1 )
391	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
392	cpuseconds_per_simulated_second = 0.0
393	ELSE
394	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
395	( simulated_time - &
396	simulated_time_at_begin )
397	ENDIF
398	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
399	log_point_s(10)%sum / REAL( i ), &
400	cpuseconds_per_simulated_second
401	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
402	IF ( dt_restart == 9999999.9 ) THEN
403	WRITE ( io, 204 ) ' Next restart at: ',time_restart
404	ELSE
405	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
406	ENDIF
407	ENDIF
408	ENDIF
409
410	!
411	!-- Start time for coupled runs, if independent precursor runs for atmosphere
412	!-- and ocean are used. In this case, coupling_start_time defines the time
413	!-- when the coupling is switched on.
414	IF ( coupling_start_time /= 0.0 ) THEN
415	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
416	char1 = 'Precursor run for a coupled atmosphere-ocean run'
417	ELSE
418	char1 = 'Coupled atmosphere-ocean run following independent ' // &
419	'precursor runs'
420	ENDIF
421	WRITE ( io, 207 ) char1, coupling_start_time
422	ENDIF
423
424	!
425	!-- Computational grid
426	IF ( .NOT. ocean ) THEN
427	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
428	IF ( dz_stretch_level_index < nzt+1 ) THEN
429	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
430	dz_stretch_factor, dz_max
431	ENDIF
432	ELSE
433	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
434	IF ( dz_stretch_level_index > 0 ) THEN
435	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
436	dz_stretch_factor, dz_max
437	ENDIF
438	ENDIF
439	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
440	MIN( nnz+2, nzt+2 )
441	IF ( numprocs > 1 ) THEN
442	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
443	WRITE ( io, 255 )
444	ELSE
445	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
446	ENDIF
447	ENDIF
448	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
449
450	!
451	!-- Topography
452	WRITE ( io, 270 ) topography
453	SELECT CASE ( TRIM( topography ) )
454
455	CASE ( 'flat' )
456	! no actions necessary
457
458	CASE ( 'single_building' )
459	blx = INT( building_length_x / dx )
460	bly = INT( building_length_y / dy )
461	bh = INT( building_height / dz )
462
463	IF ( building_wall_left == 9999999.9 ) THEN
464	building_wall_left = ( nx + 1 - blx ) / 2 * dx
465	ENDIF
466	bxl = INT ( building_wall_left / dx + 0.5 )
467	bxr = bxl + blx
468
469	IF ( building_wall_south == 9999999.9 ) THEN
470	building_wall_south = ( ny + 1 - bly ) / 2 * dy
471	ENDIF
472	bys = INT ( building_wall_south / dy + 0.5 )
473	byn = bys + bly
474
475	WRITE ( io, 271 ) building_length_x, building_length_y, &
476	building_height, bxl, bxr, bys, byn
477
478	CASE ( 'single_street_canyon' )
479	ch = NINT( canyon_height / dz )
480	IF ( canyon_width_x /= 9999999.9 ) THEN
481	!
482	!-- Street canyon in y direction
483	cwx = NINT( canyon_width_x / dx )
484	IF ( canyon_wall_left == 9999999.9 ) THEN
485	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
486	ENDIF
487	cxl = NINT( canyon_wall_left / dx )
488	cxr = cxl + cwx
489	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
490
491	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
492	!
493	!-- Street canyon in x direction
494	cwy = NINT( canyon_width_y / dy )
495	IF ( canyon_wall_south == 9999999.9 ) THEN
496	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
497	ENDIF
498	cys = NINT( canyon_wall_south / dy )
499	cyn = cys + cwy
500	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
501	ENDIF
502
503	END SELECT
504
505	IF ( TRIM( topography ) /= 'flat' ) THEN
506	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
507	IF ( TRIM( topography ) == 'single_building' .OR. &
508	TRIM( topography ) == 'single_street_canyon' ) THEN
509	WRITE ( io, 278 )
510	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
511	WRITE ( io, 279 )
512	ENDIF
513	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
514	WRITE ( io, 278 )
515	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
516	WRITE ( io, 279 )
517	ENDIF
518	ENDIF
519
520	IF ( plant_canopy ) THEN
521
522	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
523	IF ( passive_scalar ) THEN
524	WRITE ( io, 281 ) scalar_exchange_coefficient, &
525	leaf_surface_concentration
526	ENDIF
527
528	!
529	!-- Heat flux at the top of vegetation
530	WRITE ( io, 282 ) cthf
531
532	!
533	!-- Leaf area density profile
534	!-- Building output strings, starting with surface value
535	WRITE ( learde, '(F6.4)' ) lad_surface
536	gradients = '------'
537	slices = ' 0'
538	coordinates = ' 0.0'
539	i = 1
540	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
541
542	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
543	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
544
545	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
546	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
547
548	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
549	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
550
551	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
552	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
553
554	i = i + 1
555	ENDDO
556
557	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
558	TRIM( gradients ), TRIM( slices )
559
560	ENDIF
561
562	!
563	!-- Boundary conditions
564	IF ( ibc_p_b == 0 ) THEN
565	runten = 'p(0) = 0 \|'
566	ELSEIF ( ibc_p_b == 1 ) THEN
567	runten = 'p(0) = p(1) \|'
568	ELSE
569	runten = 'p(0) = p(1) +R\|'
570	ENDIF
571	IF ( ibc_p_t == 0 ) THEN
572	roben = 'p(nzt+1) = 0 \|'
573	ELSE
574	roben = 'p(nzt+1) = p(nzt) \|'
575	ENDIF
576
577	IF ( ibc_uv_b == 0 ) THEN
578	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
579	ELSE
580	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
581	ENDIF
582	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
583	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
584	ELSEIF ( ibc_uv_t == 0 ) THEN
585	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
586	ELSE
587	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
588	ENDIF
589
590	IF ( ibc_pt_b == 0 ) THEN
591	runten = TRIM( runten ) // ' pt(0) = pt_surface'
592	ELSEIF ( ibc_pt_b == 1 ) THEN
593	runten = TRIM( runten ) // ' pt(0) = pt(1)'
594	ELSEIF ( ibc_pt_b == 2 ) THEN
595	runten = TRIM( runten ) // ' pt(0) = from coupled model'
596	ENDIF
597	IF ( ibc_pt_t == 0 ) THEN
598	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
599	ELSEIF( ibc_pt_t == 1 ) THEN
600	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
601	ELSEIF( ibc_pt_t == 2 ) THEN
602	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
603
604	ENDIF
605
606	WRITE ( io, 300 ) runten, roben
607
608	IF ( .NOT. constant_diffusion ) THEN
609	IF ( ibc_e_b == 1 ) THEN
610	runten = 'e(0) = e(1)'
611	ELSE
612	runten = 'e(0) = e(1) = (u/0.1)*2'
613	ENDIF
614	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
615
616	WRITE ( io, 301 ) 'e', runten, roben
617
618	ENDIF
619
620	IF ( ocean ) THEN
621	runten = 'sa(0) = sa(1)'
622	IF ( ibc_sa_t == 0 ) THEN
623	roben = 'sa(nzt+1) = sa_surface'
624	ELSE
625	roben = 'sa(nzt+1) = sa(nzt)'
626	ENDIF
627	WRITE ( io, 301 ) 'sa', runten, roben
628	ENDIF
629
630	IF ( humidity ) THEN
631	IF ( ibc_q_b == 0 ) THEN
632	runten = 'q(0) = q_surface'
633	ELSE
634	runten = 'q(0) = q(1)'
635	ENDIF
636	IF ( ibc_q_t == 0 ) THEN
637	roben = 'q(nzt) = q_top'
638	ELSE
639	roben = 'q(nzt) = q(nzt-1) + dq/dz'
640	ENDIF
641	WRITE ( io, 301 ) 'q', runten, roben
642	ENDIF
643
644	IF ( passive_scalar ) THEN
645	IF ( ibc_q_b == 0 ) THEN
646	runten = 's(0) = s_surface'
647	ELSE
648	runten = 's(0) = s(1)'
649	ENDIF
650	IF ( ibc_q_t == 0 ) THEN
651	roben = 's(nzt) = s_top'
652	ELSE
653	roben = 's(nzt) = s(nzt-1) + ds/dz'
654	ENDIF
655	WRITE ( io, 301 ) 's', runten, roben
656	ENDIF
657
658	IF ( use_surface_fluxes ) THEN
659	WRITE ( io, 303 )
660	IF ( constant_heatflux ) THEN
661	WRITE ( io, 306 ) surface_heatflux
662	IF ( random_heatflux ) WRITE ( io, 307 )
663	ENDIF
664	IF ( humidity .AND. constant_waterflux ) THEN
665	WRITE ( io, 311 ) surface_waterflux
666	ENDIF
667	IF ( passive_scalar .AND. constant_waterflux ) THEN
668	WRITE ( io, 313 ) surface_waterflux
669	ENDIF
670	ENDIF
671
672	IF ( use_top_fluxes ) THEN
673	WRITE ( io, 304 )
674	IF ( coupling_mode == 'uncoupled' ) THEN
675	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
676	IF ( constant_top_heatflux ) THEN
677	WRITE ( io, 306 ) top_heatflux
678	ENDIF
679	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
680	WRITE ( io, 316 )
681	ENDIF
682	IF ( ocean .AND. constant_top_salinityflux ) THEN
683	WRITE ( io, 309 ) top_salinityflux
684	ENDIF
685	IF ( humidity .OR. passive_scalar ) THEN
686	WRITE ( io, 315 )
687	ENDIF
688	ENDIF
689
690	IF ( prandtl_layer ) THEN
691	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
692	rif_min, rif_max
693	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
694	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
695	WRITE ( io, 312 )
696	ENDIF
697	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
698	WRITE ( io, 314 )
699	ENDIF
700	ELSE
701	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
702	WRITE ( io, 310 ) rif_min, rif_max
703	ENDIF
704	ENDIF
705
706	WRITE ( io, 317 ) bc_lr, bc_ns
707	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
708	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
709	IF ( turbulent_inflow ) THEN
710	WRITE ( io, 319 ) recycling_width, recycling_plane, &
711	inflow_damping_height, inflow_damping_width
712	ENDIF
713	ENDIF
714
715	!
716	!-- Listing of 1D-profiles
717	WRITE ( io, 325 ) dt_dopr_listing
718	IF ( averaging_interval_pr /= 0.0 ) THEN
719	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
720	ENDIF
721
722	!
723	!-- DATA output
724	WRITE ( io, 330 )
725	IF ( averaging_interval_pr /= 0.0 ) THEN
726	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
727	ENDIF
728
729	!
730	!-- 1D-profiles
731	dopr_chr = 'Profile:'
732	IF ( dopr_n /= 0 ) THEN
733	WRITE ( io, 331 )
734
735	output_format = ''
736	IF ( netcdf_output ) THEN
737	IF ( netcdf_data_format == 1 ) THEN
738	output_format = 'NetCDF classic'
739	ELSE
740	output_format = 'NetCDF 64bit offset'
741	ENDIF
742	ENDIF
743	IF ( profil_output ) THEN
744	IF ( netcdf_output ) THEN
745	output_format = TRIM( output_format ) // ' and profil'
746	ELSE
747	output_format = 'profil'
748	ENDIF
749	ENDIF
750	WRITE ( io, 344 ) output_format
751
752	DO i = 1, dopr_n
753	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
754	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
755	WRITE ( io, 332 ) dopr_chr
756	dopr_chr = ' :'
757	ENDIF
758	ENDDO
759
760	IF ( dopr_chr /= '' ) THEN
761	WRITE ( io, 332 ) dopr_chr
762	ENDIF
763	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
764	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
765	ENDIF
766
767	!
768	!-- 2D-arrays
769	DO av = 0, 1
770
771	i = 1
772	do2d_xy = ''
773	do2d_xz = ''
774	do2d_yz = ''
775	DO WHILE ( do2d(av,i) /= ' ' )
776
777	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
778	do2d_mode = do2d(av,i)(l-1:l)
779
780	SELECT CASE ( do2d_mode )
781	CASE ( 'xy' )
782	ll = LEN_TRIM( do2d_xy )
783	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
784	CASE ( 'xz' )
785	ll = LEN_TRIM( do2d_xz )
786	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
787	CASE ( 'yz' )
788	ll = LEN_TRIM( do2d_yz )
789	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
790	END SELECT
791
792	i = i + 1
793
794	ENDDO
795
796	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
797	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
798	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
799	( netcdf_output .OR. iso2d_output ) ) THEN
800
801	IF ( av == 0 ) THEN
802	WRITE ( io, 334 ) ''
803	ELSE
804	WRITE ( io, 334 ) '(time-averaged)'
805	ENDIF
806
807	IF ( do2d_at_begin ) THEN
808	begin_chr = 'and at the start'
809	ELSE
810	begin_chr = ''
811	ENDIF
812
813	output_format = ''
814	IF ( netcdf_output ) THEN
815	IF ( netcdf_data_format == 1 ) THEN
816	output_format = 'NetCDF classic'
817	ELSEIF ( netcdf_data_format == 2 ) THEN
818	output_format = 'NetCDF 64bit offset'
819	ELSEIF ( netcdf_data_format == 3 ) THEN
820	output_format = 'NetCDF4/HDF5'
821	ELSEIF ( netcdf_data_format == 4 ) THEN
822	output_format = 'NetCDF4/HDF5 clasic'
823	ENDIF
824	ENDIF
825	IF ( iso2d_output ) THEN
826	IF ( netcdf_output ) THEN
827	output_format = TRIM( output_format ) // ' and iso2d'
828	ELSE
829	output_format = 'iso2d'
830	ENDIF
831	ENDIF
832	WRITE ( io, 344 ) output_format
833
834	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
835	i = 1
836	slices = '/'
837	coordinates = '/'
838	!
839	!-- Building strings with index and coordinate informations of the
840	!-- slices
841	DO WHILE ( section(i,1) /= -9999 )
842
843	WRITE (section_chr,'(I5)') section(i,1)
844	section_chr = ADJUSTL( section_chr )
845	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
846
847	IF ( section(i,1) == -1 ) THEN
848	WRITE (coor_chr,'(F10.1)') -1.0
849	ELSE
850	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
851	ENDIF
852	coor_chr = ADJUSTL( coor_chr )
853	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
854
855	i = i + 1
856	ENDDO
857	IF ( av == 0 ) THEN
858	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
859	TRIM( begin_chr ), 'k', TRIM( slices ), &
860	TRIM( coordinates )
861	IF ( skip_time_do2d_xy /= 0.0 ) THEN
862	WRITE ( io, 339 ) skip_time_do2d_xy
863	ENDIF
864	ELSE
865	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
866	TRIM( begin_chr ), averaging_interval, &
867	dt_averaging_input, 'k', TRIM( slices ), &
868	TRIM( coordinates )
869	IF ( skip_time_data_output_av /= 0.0 ) THEN
870	WRITE ( io, 339 ) skip_time_data_output_av
871	ENDIF
872	ENDIF
873
874	ENDIF
875
876	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
877	i = 1
878	slices = '/'
879	coordinates = '/'
880	!
881	!-- Building strings with index and coordinate informations of the
882	!-- slices
883	DO WHILE ( section(i,2) /= -9999 )
884
885	WRITE (section_chr,'(I5)') section(i,2)
886	section_chr = ADJUSTL( section_chr )
887	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
888
889	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
890	coor_chr = ADJUSTL( coor_chr )
891	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
892
893	i = i + 1
894	ENDDO
895	IF ( av == 0 ) THEN
896	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
897	TRIM( begin_chr ), 'j', TRIM( slices ), &
898	TRIM( coordinates )
899	IF ( skip_time_do2d_xz /= 0.0 ) THEN
900	WRITE ( io, 339 ) skip_time_do2d_xz
901	ENDIF
902	ELSE
903	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
904	TRIM( begin_chr ), averaging_interval, &
905	dt_averaging_input, 'j', TRIM( slices ), &
906	TRIM( coordinates )
907	IF ( skip_time_data_output_av /= 0.0 ) THEN
908	WRITE ( io, 339 ) skip_time_data_output_av
909	ENDIF
910	ENDIF
911	ENDIF
912
913	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
914	i = 1
915	slices = '/'
916	coordinates = '/'
917	!
918	!-- Building strings with index and coordinate informations of the
919	!-- slices
920	DO WHILE ( section(i,3) /= -9999 )
921
922	WRITE (section_chr,'(I5)') section(i,3)
923	section_chr = ADJUSTL( section_chr )
924	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
925
926	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
927	coor_chr = ADJUSTL( coor_chr )
928	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
929
930	i = i + 1
931	ENDDO
932	IF ( av == 0 ) THEN
933	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
934	TRIM( begin_chr ), 'i', TRIM( slices ), &
935	TRIM( coordinates )
936	IF ( skip_time_do2d_yz /= 0.0 ) THEN
937	WRITE ( io, 339 ) skip_time_do2d_yz
938	ENDIF
939	ELSE
940	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
941	TRIM( begin_chr ), averaging_interval, &
942	dt_averaging_input, 'i', TRIM( slices ), &
943	TRIM( coordinates )
944	IF ( skip_time_data_output_av /= 0.0 ) THEN
945	WRITE ( io, 339 ) skip_time_data_output_av
946	ENDIF
947	ENDIF
948	ENDIF
949
950	ENDIF
951
952	ENDDO
953
954	!
955	!-- 3d-arrays
956	DO av = 0, 1
957
958	i = 1
959	do3d_chr = ''
960	DO WHILE ( do3d(av,i) /= ' ' )
961
962	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
963	i = i + 1
964
965	ENDDO
966
967	IF ( do3d_chr /= '' ) THEN
968	IF ( av == 0 ) THEN
969	WRITE ( io, 336 ) ''
970	ELSE
971	WRITE ( io, 336 ) '(time-averaged)'
972	ENDIF
973
974	output_format = ''
975	IF ( netcdf_output ) THEN
976	IF ( netcdf_data_format == 1 ) THEN
977	output_format = 'NetCDF classic'
978	ELSEIF ( netcdf_data_format == 2 ) THEN
979	output_format = 'NetCDF 64bit offset'
980	ELSEIF ( netcdf_data_format == 3 ) THEN
981	output_format = 'NetCDF4/HDF5'
982	ELSEIF ( netcdf_data_format == 4 ) THEN
983	output_format = 'NetCDF4/HDF5 clasic'
984	ENDIF
985	ENDIF
986	IF ( avs_output ) THEN
987	IF ( netcdf_output ) THEN
988	output_format = TRIM( output_format ) // ' and avs'
989	ELSE
990	output_format = 'avs'
991	ENDIF
992	ENDIF
993	WRITE ( io, 344 ) output_format
994
995	IF ( do3d_at_begin ) THEN
996	begin_chr = 'and at the start'
997	ELSE
998	begin_chr = ''
999	ENDIF
1000	IF ( av == 0 ) THEN
1001	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1002	zu(nz_do3d), nz_do3d
1003	ELSE
1004	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1005	TRIM( begin_chr ), averaging_interval, &
1006	dt_averaging_input, zu(nz_do3d), nz_do3d
1007	ENDIF
1008
1009	IF ( do3d_compress ) THEN
1010	do3d_chr = ''
1011	i = 1
1012	DO WHILE ( do3d(av,i) /= ' ' )
1013
1014	SELECT CASE ( do3d(av,i) )
1015	CASE ( 'u' )
1016	j = 1
1017	CASE ( 'v' )
1018	j = 2
1019	CASE ( 'w' )
1020	j = 3
1021	CASE ( 'p' )
1022	j = 4
1023	CASE ( 'pt' )
1024	j = 5
1025	END SELECT
1026	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1027	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1028	':' // prec // ','
1029	i = i + 1
1030
1031	ENDDO
1032	WRITE ( io, 338 ) do3d_chr
1033
1034	ENDIF
1035
1036	IF ( av == 0 ) THEN
1037	IF ( skip_time_do3d /= 0.0 ) THEN
1038	WRITE ( io, 339 ) skip_time_do3d
1039	ENDIF
1040	ELSE
1041	IF ( skip_time_data_output_av /= 0.0 ) THEN
1042	WRITE ( io, 339 ) skip_time_data_output_av
1043	ENDIF
1044	ENDIF
1045
1046	ENDIF
1047
1048	ENDDO
1049
1050	!
1051	!-- masked arrays
1052	IF ( masks > 0 ) WRITE ( io, 345 ) &
1053	mask_scale_x, mask_scale_y, mask_scale_z
1054	DO mid = 1, masks
1055	DO av = 0, 1
1056
1057	i = 1
1058	domask_chr = ''
1059	DO WHILE ( domask(mid,av,i) /= ' ' )
1060	domask_chr = TRIM( domask_chr ) // ' ' // &
1061	TRIM( domask(mid,av,i) ) // ','
1062	i = i + 1
1063	ENDDO
1064
1065	IF ( domask_chr /= '' ) THEN
1066	IF ( av == 0 ) THEN
1067	WRITE ( io, 346 ) '', mid
1068	ELSE
1069	WRITE ( io, 346 ) ' (time-averaged)', mid
1070	ENDIF
1071
1072	output_format = ''
1073	IF ( netcdf_output ) THEN
1074	IF ( netcdf_data_format == 1 ) THEN
1075	output_format = 'NetCDF classic'
1076	ELSEIF ( netcdf_data_format == 2 ) THEN
1077	output_format = 'NetCDF 64bit offset'
1078	ELSEIF ( netcdf_data_format == 3 ) THEN
1079	output_format = 'NetCDF4/HDF5'
1080	ELSEIF ( netcdf_data_format == 4 ) THEN
1081	output_format = 'NetCDF4/HDF5 clasic'
1082	ENDIF
1083	ENDIF
1084	WRITE ( io, 344 ) output_format
1085
1086	IF ( av == 0 ) THEN
1087	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1088	ELSE
1089	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1090	averaging_interval, dt_averaging_input
1091	ENDIF
1092
1093	IF ( av == 0 ) THEN
1094	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1095	WRITE ( io, 339 ) skip_time_domask(mid)
1096	ENDIF
1097	ELSE
1098	IF ( skip_time_data_output_av /= 0.0 ) THEN
1099	WRITE ( io, 339 ) skip_time_data_output_av
1100	ENDIF
1101	ENDIF
1102	!
1103	!-- output locations
1104	DO dim = 1, 3
1105	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1106	count = 0
1107	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1108	count = count + 1
1109	ENDDO
1110	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1111	mask(mid,dim,:count)
1112	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1113	mask_loop(mid,dim,2) < 0.0 .AND. &
1114	mask_loop(mid,dim,3) == 0.0 ) THEN
1115	WRITE ( io, 350 ) dir(dim), dir(dim)
1116	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1117	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1118	mask_loop(mid,dim,1:2)
1119	ELSE
1120	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1121	mask_loop(mid,dim,1:3)
1122	ENDIF
1123	ENDDO
1124	ENDIF
1125
1126	ENDDO
1127	ENDDO
1128
1129	!
1130	!-- Timeseries
1131	IF ( dt_dots /= 9999999.9 ) THEN
1132	WRITE ( io, 340 )
1133
1134	output_format = ''
1135	IF ( netcdf_output ) THEN
1136	IF ( netcdf_data_format == 1 ) THEN
1137	output_format = 'NetCDF classic'
1138	ELSE
1139	output_format = 'NetCDF 64bit offset'
1140	ENDIF
1141	ENDIF
1142	IF ( profil_output ) THEN
1143	IF ( netcdf_output ) THEN
1144	output_format = TRIM( output_format ) // ' and profil'
1145	ELSE
1146	output_format = 'profil'
1147	ENDIF
1148	ENDIF
1149	WRITE ( io, 344 ) output_format
1150	WRITE ( io, 341 ) dt_dots
1151	ENDIF
1152
1153	#if defined( __dvrp_graphics )
1154	!
1155	!-- Dvrp-output
1156	IF ( dt_dvrp /= 9999999.9 ) THEN
1157	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1158	TRIM( dvrp_username ), TRIM( dvrp_directory )
1159	i = 1
1160	l = 0
1161	m = 0
1162	DO WHILE ( mode_dvrp(i) /= ' ' )
1163	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1164	READ ( mode_dvrp(i), '(10X,I2)' ) j
1165	l = l + 1
1166	IF ( do3d(0,j) /= ' ' ) THEN
1167	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1168	isosurface_color(:,l)
1169	ENDIF
1170	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1171	READ ( mode_dvrp(i), '(6X,I2)' ) j
1172	m = m + 1
1173	IF ( do2d(0,j) /= ' ' ) THEN
1174	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1175	slicer_range_limits_dvrp(:,m)
1176	ENDIF
1177	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1178	WRITE ( io, 363 ) dvrp_psize
1179	IF ( particle_dvrpsize /= 'none' ) THEN
1180	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1181	dvrpsize_interval
1182	ENDIF
1183	IF ( particle_color /= 'none' ) THEN
1184	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1185	color_interval
1186	ENDIF
1187	ENDIF
1188	i = i + 1
1189	ENDDO
1190
1191	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1192	superelevation_y, superelevation, clip_dvrp_l, &
1193	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1194
1195	IF ( TRIM( topography ) /= 'flat' ) THEN
1196	WRITE ( io, 366 ) topography_color
1197	IF ( cluster_size > 1 ) THEN
1198	WRITE ( io, 367 ) cluster_size
1199	ENDIF
1200	ENDIF
1201
1202	ENDIF
1203	#endif
1204
1205	#if defined( __spectra )
1206	!
1207	!-- Spectra output
1208	IF ( dt_dosp /= 9999999.9 ) THEN
1209	WRITE ( io, 370 )
1210
1211	output_format = ''
1212	IF ( netcdf_output ) THEN
1213	IF ( netcdf_data_format == 1 ) THEN
1214	output_format = 'NetCDF classic'
1215	ELSE
1216	output_format = 'NetCDF 64bit offset'
1217	ENDIF
1218	ENDIF
1219	IF ( profil_output ) THEN
1220	IF ( netcdf_output ) THEN
1221	output_format = TRIM( output_format ) // ' and profil'
1222	ELSE
1223	output_format = 'profil'
1224	ENDIF
1225	ENDIF
1226	WRITE ( io, 344 ) output_format
1227	WRITE ( io, 371 ) dt_dosp
1228	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1229	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1230	( spectra_direction(i), i = 1,10 ), &
1231	( comp_spectra_level(i), i = 1,100 ), &
1232	( plot_spectra_level(i), i = 1,100 ), &
1233	averaging_interval_sp, dt_averaging_input_pr
1234	ENDIF
1235	#endif
1236
1237	WRITE ( io, 99 )
1238
1239	!
1240	!-- Physical quantities
1241	WRITE ( io, 400 )
1242
1243	!
1244	!-- Geostrophic parameters
1245	WRITE ( io, 410 ) omega, phi, f, fs
1246
1247	!
1248	!-- Other quantities
1249	WRITE ( io, 411 ) g
1250	IF ( use_reference ) THEN
1251	IF ( ocean ) THEN
1252	WRITE ( io, 412 ) prho_reference
1253	ELSE
1254	WRITE ( io, 413 ) pt_reference
1255	ENDIF
1256	ENDIF
1257
1258	!
1259	!-- Cloud physics parameters
1260	IF ( cloud_physics ) THEN
1261	WRITE ( io, 415 )
1262	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1263	ENDIF
1264
1265	!-- Profile of the geostrophic wind (component ug)
1266	!-- Building output strings
1267	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1268	gradients = '------'
1269	slices = ' 0'
1270	coordinates = ' 0.0'
1271	i = 1
1272	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1273
1274	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1275	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1276
1277	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1279
1280	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1282
1283	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1285
1286	IF ( i == 10 ) THEN
1287	EXIT
1288	ELSE
1289	i = i + 1
1290	ENDIF
1291
1292	ENDDO
1293
1294	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1295	TRIM( gradients ), TRIM( slices )
1296
1297	!-- Profile of the geostrophic wind (component vg)
1298	!-- Building output strings
1299	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1300	gradients = '------'
1301	slices = ' 0'
1302	coordinates = ' 0.0'
1303	i = 1
1304	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1305
1306	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1307	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1308
1309	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1310	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1311
1312	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1313	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1314
1315	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1316	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1317
1318	IF ( i == 10 ) THEN
1319	EXIT
1320	ELSE
1321	i = i + 1
1322	ENDIF
1323
1324	ENDDO
1325
1326	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1327	TRIM( gradients ), TRIM( slices )
1328
1329	!
1330	!-- Initial wind profiles
1331	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1332
1333	!
1334	!-- Initial temperature profile
1335	!-- Building output strings, starting with surface temperature
1336	WRITE ( temperatures, '(F6.2)' ) pt_surface
1337	gradients = '------'
1338	slices = ' 0'
1339	coordinates = ' 0.0'
1340	i = 1
1341	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1342
1343	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1344	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1345
1346	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1347	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1348
1349	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1350	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1351
1352	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1353	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1354
1355	IF ( i == 10 ) THEN
1356	EXIT
1357	ELSE
1358	i = i + 1
1359	ENDIF
1360
1361	ENDDO
1362
1363	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1364	TRIM( gradients ), TRIM( slices )
1365
1366	!
1367	!-- Initial humidity profile
1368	!-- Building output strings, starting with surface humidity
1369	IF ( humidity .OR. passive_scalar ) THEN
1370	WRITE ( temperatures, '(E8.1)' ) q_surface
1371	gradients = '--------'
1372	slices = ' 0'
1373	coordinates = ' 0.0'
1374	i = 1
1375	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1376
1377	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1378	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1379
1380	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1381	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1382
1383	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1384	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1385
1386	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1387	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1388
1389	IF ( i == 10 ) THEN
1390	EXIT
1391	ELSE
1392	i = i + 1
1393	ENDIF
1394
1395	ENDDO
1396
1397	IF ( humidity ) THEN
1398	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1399	TRIM( gradients ), TRIM( slices )
1400	ELSE
1401	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1402	TRIM( gradients ), TRIM( slices )
1403	ENDIF
1404	ENDIF
1405
1406	!
1407	!-- Initial salinity profile
1408	!-- Building output strings, starting with surface salinity
1409	IF ( ocean ) THEN
1410	WRITE ( temperatures, '(F6.2)' ) sa_surface
1411	gradients = '------'
1412	slices = ' 0'
1413	coordinates = ' 0.0'
1414	i = 1
1415	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1416
1417	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1418	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1419
1420	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1421	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1422
1423	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1424	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1425
1426	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1427	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1428
1429	IF ( i == 10 ) THEN
1430	EXIT
1431	ELSE
1432	i = i + 1
1433	ENDIF
1434
1435	ENDDO
1436
1437	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1438	TRIM( gradients ), TRIM( slices )
1439	ENDIF
1440
1441	!
1442	!-- Profile for the large scale vertial velocity
1443	!-- Building output strings, starting with surface value
1444	IF ( large_scale_subsidence ) THEN
1445	temperatures = ' 0.0'
1446	gradients = '------'
1447	slices = ' 0'
1448	coordinates = ' 0.0'
1449	i = 1
1450	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1451
1452	WRITE (coor_chr,'(E10.2,7X)') &
1453	w_subs(subs_vertical_gradient_level_i(i))
1454	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1455
1456	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1457	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1458
1459	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1460	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1461
1462	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1463	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1464
1465	IF ( i == 10 ) THEN
1466	EXIT
1467	ELSE
1468	i = i + 1
1469	ENDIF
1470
1471	ENDDO
1472
1473	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1474	TRIM( gradients ), TRIM( slices )
1475	ENDIF
1476
1477	!
1478	!-- Cloud physcis parameters / quantities / numerical methods
1479	WRITE ( io, 430 )
1480	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1481	WRITE ( io, 431 )
1482	ELSEIF ( humidity .AND. cloud_physics ) THEN
1483	WRITE ( io, 432 )
1484	IF ( radiation ) WRITE ( io, 132 )
1485	IF ( precipitation ) WRITE ( io, 133 )
1486	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1487	WRITE ( io, 433 )
1488	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1489	IF ( collision_kernel /= 'none' ) THEN
1490	WRITE ( io, 435 ) TRIM( collision_kernel )
1491	IF ( collision_kernel(6:9) == 'fast' ) THEN
1492	WRITE ( io, 436 ) radius_classes, dissipation_classes
1493	ENDIF
1494	ELSE
1495	WRITE ( io, 437 )
1496	ENDIF
1497	ENDIF
1498
1499	!
1500	!-- LES / turbulence parameters
1501	WRITE ( io, 450 )
1502
1503	!--
1504	! ... LES-constants used must still be added here
1505	!--
1506	IF ( constant_diffusion ) THEN
1507	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1508	prandtl_number
1509	ENDIF
1510	IF ( .NOT. constant_diffusion) THEN
1511	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1512	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1513	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1514	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1515	ENDIF
1516
1517	!
1518	!-- Special actions during the run
1519	WRITE ( io, 470 )
1520	IF ( create_disturbances ) THEN
1521	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1522	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1523	zu(disturbance_level_ind_t), disturbance_level_ind_t
1524	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1525	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1526	ELSE
1527	WRITE ( io, 473 ) disturbance_energy_limit
1528	ENDIF
1529	WRITE ( io, 474 ) TRIM( random_generator )
1530	ENDIF
1531	IF ( pt_surface_initial_change /= 0.0 ) THEN
1532	WRITE ( io, 475 ) pt_surface_initial_change
1533	ENDIF
1534	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1535	WRITE ( io, 476 ) q_surface_initial_change
1536	ENDIF
1537	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1538	WRITE ( io, 477 ) q_surface_initial_change
1539	ENDIF
1540
1541	IF ( particle_advection ) THEN
1542	!
1543	!-- Particle attributes
1544	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1545	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1546	end_time_prel, dt_sort_particles
1547	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1548	IF ( random_start_position ) WRITE ( io, 481 )
1549	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1550	WRITE ( io, 495 ) total_number_of_particles
1551	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1552	WRITE ( io, 483 ) maximum_number_of_tailpoints
1553	IF ( minimum_tailpoint_distance /= 0 ) THEN
1554	WRITE ( io, 484 ) total_number_of_tails, &
1555	minimum_tailpoint_distance, &
1556	maximum_tailpoint_age
1557	ENDIF
1558	ENDIF
1559	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1560	WRITE ( io, 485 ) dt_write_particle_data
1561	output_format = ''
1562	IF ( netcdf_output ) THEN
1563	IF ( netcdf_data_format > 1 ) THEN
1564	output_format = 'netcdf (64 bit offset) and binary'
1565	ELSE
1566	output_format = 'netcdf and binary'
1567	ENDIF
1568	ELSE
1569	output_format = 'binary'
1570	ENDIF
1571	WRITE ( io, 344 ) output_format
1572	ENDIF
1573	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1574	IF ( write_particle_statistics ) WRITE ( io, 486 )
1575
1576	WRITE ( io, 487 ) number_of_particle_groups
1577
1578	DO i = 1, number_of_particle_groups
1579	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1580	WRITE ( io, 490 ) i, 0.0
1581	WRITE ( io, 492 )
1582	ELSE
1583	WRITE ( io, 490 ) i, radius(i)
1584	IF ( density_ratio(i) /= 0.0 ) THEN
1585	WRITE ( io, 491 ) density_ratio(i)
1586	ELSE
1587	WRITE ( io, 492 )
1588	ENDIF
1589	ENDIF
1590	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1591	pdx(i), pdy(i), pdz(i)
1592	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1593	ENDDO
1594
1595	ENDIF
1596
1597
1598	!
1599	!-- Parameters of 1D-model
1600	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1601	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1602	mixing_length_1d, dissipation_1d
1603	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1604	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1605	ENDIF
1606	ENDIF
1607
1608	!
1609	!-- User-defined informations
1610	CALL user_header( io )
1611
1612	WRITE ( io, 99 )
1613
1614	!
1615	!-- Write buffer contents to disc immediately
1616	CALL local_flush( io )
1617
1618	!
1619	!-- Here the FORMATs start
1620
1621	99 FORMAT (1X,78('-'))
1622	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1623	1X,'* ',A,' *',9X,A/ &
1624	1X,'***************************',9X,42('-'))
1625	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1626	37X,42('-'))
1627	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1628	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1629	' Run on host: ',A10)
1630	#if defined( __parallel )
1631	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1632	')',1X,A)
1633	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1634	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1635	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1636	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1637	37X,'because the job is running on an SMP-cluster')
1638	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1639	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1640	#endif
1641	110 FORMAT (/' Numerical Schemes:'/ &
1642	' -----------------'/)
1643	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1644	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1645	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1646	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1647	' or Upstream')
1648	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1649	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1650	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1651	' or Upstream')
1652	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1653	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1654	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1655	' Translation velocity = ',A/ &
1656	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1657	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1658	' of timestep changes)')
1659	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1660	' timestep changes')
1661	122 FORMAT (' --> Time differencing scheme: ',A)
1662	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1663	' maximum damping coefficient: ',F5.3, ' 1/s')
1664	124 FORMAT (' Spline-overshoots are being suppressed')
1665	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1666	' of'/ &
1667	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1668	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1669	' of'/ &
1670	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1671	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1672	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1673	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1674	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1675	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1676	130 FORMAT (' --> Additional prognostic equation for the total water content')
1677	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1678	' effective emissivity scheme')
1679	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1680	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1681	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1682	A,'-cycle)'/ &
1683	' number of grid levels: ',I2/ &
1684	' Gauss-Seidel red/black iterations: ',I2)
1685	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1686	I3,')')
1687	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1688	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1689	I3,')'/ &
1690	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1691	I3,')')
1692	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1693	139 FORMAT (' --> Loop optimization method: ',A)
1694	140 FORMAT (' maximum residual allowed: ',E10.3)
1695	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1696	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1697	'step')
1698	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1699	'kinetic energy')
1700	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1701	'conserved'/ &
1702	' using the ',A,' mode')
1703	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1704	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1705	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1706	/' starting from dp_level_b =', F8.3, 'm', A /)
1707	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1708	'prognostic equation for')
1709	154 FORMAT (' the potential temperature')
1710	200 FORMAT (//' Run time and time step information:'/ &
1711	' ----------------------------------'/)
1712	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1713	' CFL-factor: ',F4.2)
1714	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1715	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1716	' End time: ',F9.3,' s')
1717	204 FORMAT ( A,F9.3,' s')
1718	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1719	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1720	' CPU-time used: ',F9.3,' s per timestep: ', &
1721	' ',F9.3,' s'/ &
1722	' per second of simulated tim', &
1723	'e: ',F9.3,' s')
1724	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1725	250 FORMAT (//' Computational grid and domain size:'/ &
1726	' ----------------------------------'// &
1727	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1728	' m dz = ',F7.3,' m'/ &
1729	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1730	' m z(u) = ',F10.3,' m'/)
1731	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1732	' factor: ',F5.3/ &
1733	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1734	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1735	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1736	255 FORMAT (' Subdomains have equal size')
1737	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1738	'have smaller sizes'/ &
1739	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1740	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1741	' degrees')
1742	270 FORMAT (//' Topography informations:'/ &
1743	' -----------------------'// &
1744	1X,'Topography: ',A)
1745	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1746	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1747	' / ',I4)
1748	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1749	' direction' / &
1750	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1751	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1752	278 FORMAT (' Topography grid definition convention:'/ &
1753	' cell edge (staggered grid points'/ &
1754	' (u in x-direction, v in y-direction))' /)
1755	279 FORMAT (' Topography grid definition convention:'/ &
1756	' cell center (scalar grid points)' /)
1757	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1758	' ------------------------------'// &
1759	' Canopy mode: ', A / &
1760	' Canopy top: ',I4 / &
1761	' Leaf drag coefficient: ',F6.2 /)
1762	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1763	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1764	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1765	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1766	' Height: ',A,' m'/ &
1767	' Leaf area density: ',A,' m2/m3'/ &
1768	' Gradient: ',A,' m2/m4'/ &
1769	' Gridpoint: ',A)
1770
1771	300 FORMAT (//' Boundary conditions:'/ &
1772	' -------------------'// &
1773	' p uv ', &
1774	' pt'// &
1775	' B. bound.: ',A/ &
1776	' T. bound.: ',A)
1777	301 FORMAT (/' ',A// &
1778	' B. bound.: ',A/ &
1779	' T. bound.: ',A)
1780	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1781	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1782	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1783	'computational u,v-level:'// &
1784	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1785	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1786	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1787	307 FORMAT (' Heatflux has a random normal distribution')
1788	308 FORMAT (' Predefined surface temperature')
1789	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1790	310 FORMAT (//' 1D-Model:'// &
1791	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1792	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1793	312 FORMAT (' Predefined surface humidity')
1794	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1795	314 FORMAT (' Predefined scalar value at the surface')
1796	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1797	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1798	'atmosphere model')
1799	317 FORMAT (//' Lateral boundaries:'/ &
1800	' left/right: ',A/ &
1801	' north/south: ',A)
1802	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1803	'max =',F5.1,' m**2/s')
1804	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1805	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1806	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1807	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1808	' v: ',F9.6,' m2/s2')
1809	325 FORMAT (//' List output:'/ &
1810	' -----------'// &
1811	' 1D-Profiles:'/ &
1812	' Output every ',F8.2,' s')
1813	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1814	' Averaging input every ',F8.2,' s')
1815	330 FORMAT (//' Data output:'/ &
1816	' -----------'/)
1817	331 FORMAT (/' 1D-Profiles:')
1818	332 FORMAT (/' ',A)
1819	333 FORMAT (' Output every ',F8.2,' s',/ &
1820	' Time averaged over ',F8.2,' s'/ &
1821	' Averaging input every ',F8.2,' s')
1822	334 FORMAT (/' 2D-Arrays',A,':')
1823	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1824	' Output every ',F8.2,' s ',A/ &
1825	' Cross sections at ',A1,' = ',A/ &
1826	' scalar-coordinates: ',A,' m'/)
1827	336 FORMAT (/' 3D-Arrays',A,':')
1828	337 FORMAT (/' Arrays: ',A/ &
1829	' Output every ',F8.2,' s ',A/ &
1830	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1831	338 FORMAT (' Compressed data output'/ &
1832	' Decimal precision: ',A/)
1833	339 FORMAT (' No output during initial ',F8.2,' s')
1834	340 FORMAT (/' Time series:')
1835	341 FORMAT (' Output every ',F8.2,' s'/)
1836	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1837	' Output every ',F8.2,' s ',A/ &
1838	' Time averaged over ',F8.2,' s'/ &
1839	' Averaging input every ',F8.2,' s'/ &
1840	' Cross sections at ',A1,' = ',A/ &
1841	' scalar-coordinates: ',A,' m'/)
1842	343 FORMAT (/' Arrays: ',A/ &
1843	' Output every ',F8.2,' s ',A/ &
1844	' Time averaged over ',F8.2,' s'/ &
1845	' Averaging input every ',F8.2,' s'/ &
1846	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1847	344 FORMAT (' Output format: ',A/)
1848	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1849	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1850	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1851	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1852	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1853	347 FORMAT (' Variables: ',A/ &
1854	' Output every ',F8.2,' s')
1855	348 FORMAT (' Variables: ',A/ &
1856	' Output every ',F8.2,' s'/ &
1857	' Time averaged over ',F8.2,' s'/ &
1858	' Averaging input every ',F8.2,' s')
1859	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1860	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1861	13(' ',8(F8.2,',')/) )
1862	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1863	'all gridpoints along ',A,'-direction (default).' )
1864	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1865	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1866	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1867	#if defined( __dvrp_graphics )
1868	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1869	' Output every ',F7.1,' s'/ &
1870	' Output mode: ',A/ &
1871	' Host / User: ',A,' / ',A/ &
1872	' Directory: ',A// &
1873	' The sequence contains:')
1874	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1875	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1876	362 FORMAT (/' Slicer plane ',A/ &
1877	' Slicer limits: [',F6.2,',',F6.2,']')
1878	363 FORMAT (/' Particles'/ &
1879	' particle size: ',F7.2,' m')
1880	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1881	F6.2,',',F6.2,']')
1882	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1883	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1884	')'/ &
1885	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1886	' from y = ',F9.1,' m to y = ',F9.1,' m')
1887	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1888	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1889	#endif
1890	#if defined( __spectra )
1891	370 FORMAT (' Spectra:')
1892	371 FORMAT (' Output every ',F7.1,' s'/)
1893	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1894	' Directions: ', 10(A5,',')/ &
1895	' height levels k = ', 20(I3,',')/ &
1896	' ', 20(I3,',')/ &
1897	' ', 20(I3,',')/ &
1898	' ', 20(I3,',')/ &
1899	' ', 19(I3,','),I3,'.'/ &
1900	' height levels selected for standard plot:'/ &
1901	' k = ', 20(I3,',')/ &
1902	' ', 20(I3,',')/ &
1903	' ', 20(I3,',')/ &
1904	' ', 20(I3,',')/ &
1905	' ', 19(I3,','),I3,'.'/ &
1906	' Time averaged over ', F7.1, ' s,' / &
1907	' Profiles for the time averaging are taken every ', &
1908	F6.1,' s')
1909	#endif
1910	400 FORMAT (//' Physical quantities:'/ &
1911	' -------------------'/)
1912	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1913	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1914	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1915	' f* = ',F9.6,' 1/s')
1916	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1917	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1918	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1919	415 FORMAT (/' Cloud physics parameters:'/ &
1920	' ------------------------'/)
1921	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1922	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1923	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1924	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1925	' Vapourization heat : L_v = ',E8.2,' J/kg')
1926	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1927	' Height: ',A,' m'/ &
1928	' Temperature: ',A,' K'/ &
1929	' Gradient: ',A,' K/100m'/ &
1930	' Gridpoint: ',A)
1931	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1932	' Height: ',A,' m'/ &
1933	' Humidity: ',A,' kg/kg'/ &
1934	' Gradient: ',A,' (kg/kg)/100m'/ &
1935	' Gridpoint: ',A)
1936	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1937	' Height: ',A,' m'/ &
1938	' Scalar concentration: ',A,' kg/m**3'/ &
1939	' Gradient: ',A,' (kg/m**3)/100m'/ &
1940	' Gridpoint: ',A)
1941	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1942	' Height: ',A,' m'/ &
1943	' ug: ',A,' m/s'/ &
1944	' Gradient: ',A,' 1/100s'/ &
1945	' Gridpoint: ',A)
1946	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1947	' Height: ',A,' m'/ &
1948	' vg: ',A,' m/s'/ &
1949	' Gradient: ',A,' 1/100s'/ &
1950	' Gridpoint: ',A)
1951	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1952	' Height: ',A,' m'/ &
1953	' Salinity: ',A,' psu'/ &
1954	' Gradient: ',A,' psu/100m'/ &
1955	' Gridpoint: ',A)
1956	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1957	' Height: ',A,' m'/ &
1958	' w_subs: ',A,' m/s'/ &
1959	' Gradient: ',A,' (m/s)/100m'/ &
1960	' Gridpoint: ',A)
1961	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1962	' profiles')
1963	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1964	' ----------------------------------'/)
1965	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1966	'on)')
1967	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1968	' total water content is used.'/ &
1969	' Condensation is parameterized via 0% - or 100% scheme.')
1970	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1971	'icle model')
1972	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1973	' droplets < 1.0E-6 m')
1974	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1975	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1976	'are used'/ &
1977	' number of radius classes: ',I3,' interval ', &
1978	'[1.0E-6,2.0E-4] m'/ &
1979	' number of dissipation classes: ',I2,' interval ', &
1980	'[0,1000] cm2/s3')
1981	437 FORMAT (' Droplet collision is switched off')
1982	450 FORMAT (//' LES / Turbulence quantities:'/ &
1983	' ---------------------------'/)
1984	451 FORMAT (' Diffusion coefficients are constant:'/ &
1985	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1986	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1987	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1988	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1989	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1990	470 FORMAT (//' Actions during the simulation:'/ &
1991	' -----------------------------'/)
1992	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1993	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1994	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1995	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1996	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1997	' to i/j =',I4)
1998	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1999	1X,F5.3, ' m2/s2')
2000	474 FORMAT (' Random number generator used : ',A/)
2001	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2002	'respectively, if'/ &
2003	' the value is negative) by ',F5.2,' K at the beginning of the',&
2004	' 3D-simulation'/)
2005	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2006	'respectively, if the'/ &
2007	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2008	' the 3D-simulation'/)
2009	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2010	'respectively, if the'/ &
2011	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2012	' the 3D-simulation'/)
2013	480 FORMAT (' Particles:'/ &
2014	' ---------'// &
2015	' Particle advection is active (switched on at t = ', F7.1, &
2016	' s)'/ &
2017	' Start of new particle generations every ',F6.1,' s'/ &
2018	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2019	' bottom: ', A, ' top: ', A/&
2020	' Maximum particle age: ',F9.1,' s'/ &
2021	' Advection stopped at t = ',F9.1,' s'/ &
2022	' Particles are sorted every ',F9.1,' s'/)
2023	481 FORMAT (' Particles have random start positions'/)
2024	482 FORMAT (' Particles are advected only horizontally'/)
2025	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2026	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2027	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2028	' Maximum age of the end of the tail: ',F8.2,' s')
2029	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2030	486 FORMAT (' Particle statistics are written on file'/)
2031	487 FORMAT (' Number of particle groups: ',I2/)
2032	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2033	' minimum timestep for advection: ', F7.5/)
2034	489 FORMAT (' Number of particles simultaneously released at each ', &
2035	'point: ', I5/)
2036	490 FORMAT (' Particle group ',I2,':'/ &
2037	' Particle radius: ',E10.3, 'm')
2038	491 FORMAT (' Particle inertia is activated'/ &
2039	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2040	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2041	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2042	' y:',F8.1,' - ',F8.1,' m'/&
2043	' z:',F8.1,' - ',F8.1,' m'/&
2044	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2045	' m dz = ',F8.1,' m'/)
2046	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2047	F8.2,' s'/)
2048	495 FORMAT (' Number of particles in total domain: ',I10/)
2049	500 FORMAT (//' 1D-Model parameters:'/ &
2050	' -------------------'// &
2051	' Simulation time: ',F8.1,' s'/ &
2052	' Run-controll output every: ',F8.1,' s'/ &
2053	' Vertical profile output every: ',F8.1,' s'/ &
2054	' Mixing length calculation: ',A/ &
2055	' Dissipation calculation: ',A/)
2056	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2057	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2058	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2059
2060
2061	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |