Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 270

Last change on this file since 270 was 256, checked in by letzel, 16 years ago
topography_grid_convention moved from userpar to inipar documentation and examples updated
Property svn:keywords set to `Id`
File size: 66.6 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Output of messages replaced by message handling routine.
7	! Output of cluster_size
8	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
9	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
10	! dp_smooth, dpdxy, u_bulk, v_bulk
11	! topography_grid_convention moved from user_header
12	!
13	! Former revisions:
14	! -----------------
15	! $Id: header.f90 256 2009-03-08 08:56:27Z letzel $
16	!
17	! 206 2008-10-13 14:59:11Z raasch
18	! Bugfix: error in zu index in case of section_xy = -1
19	!
20	! 198 2008-09-17 08:55:28Z raasch
21	! Format adjustments allowing output of larger revision numbers
22	!
23	! 197 2008-09-16 15:29:03Z raasch
24	! allow 100 spectra levels instead of 10 for consistency with
25	! define_netcdf_header,
26	! bugfix in the output of the characteristic levels of potential temperature,
27	! geostrophic wind, scalar concentration, humidity and leaf area density,
28	! output of turbulence recycling informations
29	!
30	! 138 2007-11-28 10:03:58Z letzel
31	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
32	! Allow two instead of one digit to specify isosurface and slicer variables.
33	! Output of sorting frequency of particles
34	!
35	! 108 2007-08-24 15:10:38Z letzel
36	! Output of informations for coupled model runs (boundary conditions etc.)
37	! + output of momentumfluxes at the top boundary
38	! Rayleigh damping for ocean, e_init
39	!
40	! 97 2007-06-21 08:23:15Z raasch
41	! Adjustments for the ocean version.
42	! use_pt_reference renamed use_reference
43	!
44	! 87 2007-05-22 15:46:47Z raasch
45	! Bugfix: output of use_upstream_for_tke
46	!
47	! 82 2007-04-16 15:40:52Z raasch
48	! Preprocessor strings for different linux clusters changed to "lc",
49	! routine local_flush is used for buffer flushing
50	!
51	! 76 2007-03-29 00:58:32Z raasch
52	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
53	! output of the loop optimization method, moisture renamed humidity,
54	! output of subversion revision number
55	!
56	! 19 2007-02-23 04:53:48Z raasch
57	! Output of scalar flux applied at top boundary
58	!
59	! RCS Log replace by Id keyword, revision history cleaned up
60	!
61	! Revision 1.63 2006/08/22 13:53:13 raasch
62	! Output of dz_max
63	!
64	! Revision 1.1 1997/08/11 06:17:20 raasch
65	! Initial revision
66	!
67	!
68	! Description:
69	! ------------
70	! Writing a header with all important informations about the actual run.
71	! This subroutine is called three times, two times at the beginning
72	! (writing information on files RUN_CONTROL and HEADER) and one time at the
73	! end of the run, then writing additional information about CPU-usage on file
74	! header.
75	!------------------------------------------------------------------------------!
76
77	USE arrays_3d
78	USE control_parameters
79	USE cloud_parameters
80	USE cpulog
81	USE dvrp_variables
82	USE grid_variables
83	USE indices
84	USE model_1d
85	USE particle_attributes
86	USE pegrid
87	USE spectrum
88
89	IMPLICIT NONE
90
91	CHARACTER (LEN=1) :: prec
92	CHARACTER (LEN=2) :: do2d_mode
93	CHARACTER (LEN=5) :: section_chr
94	CHARACTER (LEN=9) :: time_to_string
95	CHARACTER (LEN=10) :: coor_chr, host_chr
96	CHARACTER (LEN=16) :: begin_chr
97	CHARACTER (LEN=23) :: ver_rev
98	CHARACTER (LEN=40) :: output_format
99	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
100	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
101	run_classification
102	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
103	temperatures, ugcomponent, vgcomponent
104	CHARACTER (LEN=85) :: roben, runten
105
106	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
107	cyn, cys, i, ihost, io, j, l, ll
108	REAL :: cpuseconds_per_simulated_second
109
110	!
111	!-- Open the output file. At the end of the simulation, output is directed
112	!-- to unit 19.
113	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
114	.NOT. simulated_time_at_begin /= simulated_time ) THEN
115	io = 15 ! header output on file RUN_CONTROL
116	ELSE
117	io = 19 ! header output on file HEADER
118	ENDIF
119	CALL check_open( io )
120
121	!
122	!-- At the end of the run, output file (HEADER) will be rewritten with
123	!-- new informations
124	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
125
126	!
127	!-- Determine kind of model run
128	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
129	run_classification = '3D - restart run'
130	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
131	run_classification = '3D - run using 3D - prerun data'
132	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
133	run_classification = '3D - run without 1D - prerun'
134	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
135	run_classification = '3D - run with 1D - prerun'
136	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
137	run_classification = '3D - run initialized by user'
138	ELSE
139	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
140	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
141	ENDIF
142	IF ( ocean ) THEN
143	run_classification = 'ocean - ' // run_classification
144	ELSE
145	run_classification = 'atmosphere - ' // run_classification
146	ENDIF
147
148	!
149	!-- Run-identification, date, time, host
150	host_chr = host(1:10)
151	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
152	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
153	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
154	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
155	ADJUSTR( host_chr )
156	#if defined( __parallel )
157	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
158	char1 = 'calculated'
159	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
160	host(1:2) == 'lc' ) .AND. &
161	npex == -1 .AND. pdims(2) == 1 ) THEN
162	char1 = 'forced'
163	ELSE
164	char1 = 'predefined'
165	ENDIF
166	IF ( threads_per_task == 1 ) THEN
167	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
168	ELSE
169	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
170	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
171	ENDIF
172	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
173	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
174	npex == -1 .AND. pdims(2) == 1 ) &
175	THEN
176	WRITE ( io, 106 )
177	ELSEIF ( pdims(2) == 1 ) THEN
178	WRITE ( io, 107 ) 'x'
179	ELSEIF ( pdims(1) == 1 ) THEN
180	WRITE ( io, 107 ) 'y'
181	ENDIF
182	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
183	#endif
184	WRITE ( io, 99 )
185
186	!
187	!-- Numerical schemes
188	WRITE ( io, 110 )
189	IF ( psolver(1:7) == 'poisfft' ) THEN
190	WRITE ( io, 111 ) TRIM( fft_method )
191	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
192	ELSEIF ( psolver == 'sor' ) THEN
193	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
194	ELSEIF ( psolver == 'multigrid' ) THEN
195	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
196	IF ( mg_cycles == -1 ) THEN
197	WRITE ( io, 140 ) residual_limit
198	ELSE
199	WRITE ( io, 141 ) mg_cycles
200	ENDIF
201	IF ( mg_switch_to_pe0_level == 0 ) THEN
202	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
203	nzt_mg(1)
204	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
205	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
206	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
207	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
208	nzt_mg(mg_switch_to_pe0_level), &
209	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
210	nzt_mg(1)
211	ENDIF
212	ENDIF
213	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
214	THEN
215	WRITE ( io, 142 )
216	ENDIF
217
218	IF ( momentum_advec == 'pw-scheme' ) THEN
219	WRITE ( io, 113 )
220	ELSE
221	WRITE ( io, 114 )
222	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
223	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
224	overshoot_limit_w /= 0.0 ) THEN
225	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
226	overshoot_limit_w
227	ENDIF
228	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
229	ups_limit_w /= 0.0 ) &
230	THEN
231	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
232	ENDIF
233	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
234	ENDIF
235	IF ( scalar_advec == 'pw-scheme' ) THEN
236	WRITE ( io, 116 )
237	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
238	WRITE ( io, 117 )
239	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
240	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
241	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
242	ENDIF
243	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
244	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
245	ENDIF
246	ELSE
247	WRITE ( io, 118 )
248	ENDIF
249
250	WRITE ( io, 139 ) TRIM( loop_optimization )
251
252	IF ( galilei_transformation ) THEN
253	IF ( use_ug_for_galilei_tr ) THEN
254	char1 = 'geostrophic wind'
255	ELSE
256	char1 = 'mean wind in model domain'
257	ENDIF
258	IF ( simulated_time_at_begin == simulated_time ) THEN
259	char2 = 'at the start of the run'
260	ELSE
261	char2 = 'at the end of the run'
262	ENDIF
263	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
264	advected_distance_x/1000.0, advected_distance_y/1000.0
265	ENDIF
266	IF ( timestep_scheme == 'leapfrog' ) THEN
267	WRITE ( io, 120 )
268	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
269	WRITE ( io, 121 )
270	ELSE
271	WRITE ( io, 122 ) timestep_scheme
272	ENDIF
273	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
274	IF ( rayleigh_damping_factor /= 0.0 ) THEN
275	IF ( .NOT. ocean ) THEN
276	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
277	rayleigh_damping_factor
278	ELSE
279	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
280	rayleigh_damping_factor
281	ENDIF
282	ENDIF
283	IF ( humidity ) THEN
284	IF ( .NOT. cloud_physics ) THEN
285	WRITE ( io, 129 )
286	ELSE
287	WRITE ( io, 130 )
288	WRITE ( io, 131 )
289	IF ( radiation ) WRITE ( io, 132 )
290	IF ( precipitation ) WRITE ( io, 133 )
291	ENDIF
292	ENDIF
293	IF ( passive_scalar ) WRITE ( io, 134 )
294	IF ( conserve_volume_flow ) THEN
295	WRITE ( io, 150 ) conserve_volume_flow_mode
296	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
297	WRITE ( io, 151 ) u_bulk, v_bulk
298	ENDIF
299	ELSEIF ( dp_external ) THEN
300	IF ( dp_smooth ) THEN
301	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
302	ELSE
303	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
304	ENDIF
305	ENDIF
306	WRITE ( io, 99 )
307
308	!
309	!-- Runtime and timestep informations
310	WRITE ( io, 200 )
311	IF ( .NOT. dt_fixed ) THEN
312	WRITE ( io, 201 ) dt_max, cfl_factor
313	ELSE
314	WRITE ( io, 202 ) dt
315	ENDIF
316	WRITE ( io, 203 ) simulated_time_at_begin, end_time
317
318	IF ( time_restart /= 9999999.9 .AND. &
319	simulated_time_at_begin == simulated_time ) THEN
320	IF ( dt_restart == 9999999.9 ) THEN
321	WRITE ( io, 204 ) ' Restart at: ',time_restart
322	ELSE
323	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
324	ENDIF
325	ENDIF
326
327	IF ( simulated_time_at_begin /= simulated_time ) THEN
328	i = MAX ( log_point_s(10)%counts, 1 )
329	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
330	cpuseconds_per_simulated_second = 0.0
331	ELSE
332	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
333	( simulated_time - &
334	simulated_time_at_begin )
335	ENDIF
336	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
337	log_point_s(10)%sum / REAL( i ), &
338	cpuseconds_per_simulated_second
339	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
340	IF ( dt_restart == 9999999.9 ) THEN
341	WRITE ( io, 204 ) ' Next restart at: ',time_restart
342	ELSE
343	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
344	ENDIF
345	ENDIF
346	ENDIF
347
348	!
349	!-- Computational grid
350	IF ( .NOT. ocean ) THEN
351	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
352	IF ( dz_stretch_level_index < nzt+1 ) THEN
353	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
354	dz_stretch_factor, dz_max
355	ENDIF
356	ELSE
357	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
358	IF ( dz_stretch_level_index > 0 ) THEN
359	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
360	dz_stretch_factor, dz_max
361	ENDIF
362	ENDIF
363	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
364	MIN( nnz+2, nzt+2 )
365	IF ( numprocs > 1 ) THEN
366	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
367	WRITE ( io, 255 )
368	ELSE
369	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
370	ENDIF
371	ENDIF
372	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
373
374	!
375	!-- Topography
376	WRITE ( io, 270 ) topography
377	SELECT CASE ( TRIM( topography ) )
378
379	CASE ( 'flat' )
380	! no actions necessary
381
382	CASE ( 'single_building' )
383	blx = INT( building_length_x / dx )
384	bly = INT( building_length_y / dy )
385	bh = INT( building_height / dz )
386
387	IF ( building_wall_left == 9999999.9 ) THEN
388	building_wall_left = ( nx + 1 - blx ) / 2 * dx
389	ENDIF
390	bxl = INT ( building_wall_left / dx + 0.5 )
391	bxr = bxl + blx
392
393	IF ( building_wall_south == 9999999.9 ) THEN
394	building_wall_south = ( ny + 1 - bly ) / 2 * dy
395	ENDIF
396	bys = INT ( building_wall_south / dy + 0.5 )
397	byn = bys + bly
398
399	WRITE ( io, 271 ) building_length_x, building_length_y, &
400	building_height, bxl, bxr, bys, byn
401
402	CASE ( 'single_street_canyon' )
403	ch = NINT( canyon_height / dz )
404	IF ( canyon_width_x /= 9999999.9 ) THEN
405	!
406	!-- Street canyon in y direction
407	cwx = NINT( canyon_width_x / dx )
408	IF ( canyon_wall_left == 9999999.9 ) THEN
409	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
410	ENDIF
411	cxl = NINT( canyon_wall_left / dx )
412	cxr = cxl + cwx
413	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
414
415	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
416	!
417	!-- Street canyon in x direction
418	cwy = NINT( canyon_width_y / dy )
419	IF ( canyon_wall_south == 9999999.9 ) THEN
420	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
421	ENDIF
422	cys = NINT( canyon_wall_south / dy )
423	cyn = cys + cwy
424	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
425	ENDIF
426
427	END SELECT
428
429	IF ( TRIM( topography ) /= 'flat' ) THEN
430	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
431	IF ( TRIM( topography ) == 'single_building' .OR. &
432	TRIM( topography ) == 'single_street_canyon' ) THEN
433	WRITE ( io, 278 )
434	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
435	WRITE ( io, 279 )
436	ENDIF
437	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
438	WRITE ( io, 278 )
439	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
440	WRITE ( io, 279 )
441	ENDIF
442	ENDIF
443
444	IF ( plant_canopy ) THEN
445
446	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
447	IF ( passive_scalar ) THEN
448	WRITE ( io, 281 ) scalar_exchange_coefficient, &
449	leaf_surface_concentration
450	ENDIF
451
452	!
453	!-- Heat flux at the top of vegetation
454	WRITE ( io, 282 ) cthf
455
456	!
457	!-- Leaf area density profile
458	!-- Building output strings, starting with surface value
459	WRITE ( learde, '(F6.2)' ) lad_surface
460	gradients = '------'
461	slices = ' 0'
462	coordinates = ' 0.0'
463	i = 1
464	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
465
466	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
467	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
468
469	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
470	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
471
472	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
473	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
474
475	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
476	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
477
478	i = i + 1
479	ENDDO
480
481	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
482	TRIM( gradients ), TRIM( slices )
483
484	ENDIF
485
486	!
487	!-- Boundary conditions
488	IF ( ibc_p_b == 0 ) THEN
489	runten = 'p(0) = 0 \|'
490	ELSEIF ( ibc_p_b == 1 ) THEN
491	runten = 'p(0) = p(1) \|'
492	ELSE
493	runten = 'p(0) = p(1) +R\|'
494	ENDIF
495	IF ( ibc_p_t == 0 ) THEN
496	roben = 'p(nzt+1) = 0 \|'
497	ELSE
498	roben = 'p(nzt+1) = p(nzt) \|'
499	ENDIF
500
501	IF ( ibc_uv_b == 0 ) THEN
502	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
503	ELSE
504	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
505	ENDIF
506	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
507	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
508	ELSEIF ( ibc_uv_t == 0 ) THEN
509	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
510	ELSE
511	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
512	ENDIF
513
514	IF ( ibc_pt_b == 0 ) THEN
515	runten = TRIM( runten ) // ' pt(0) = pt_surface'
516	ELSEIF ( ibc_pt_b == 1 ) THEN
517	runten = TRIM( runten ) // ' pt(0) = pt(1)'
518	ELSEIF ( ibc_pt_b == 2 ) THEN
519	runten = TRIM( runten ) // ' pt(0) = from coupled model'
520	ENDIF
521	IF ( ibc_pt_t == 0 ) THEN
522	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
523	ELSEIF( ibc_pt_t == 1 ) THEN
524	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
525	ELSEIF( ibc_pt_t == 2 ) THEN
526	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
527	ENDIF
528
529	WRITE ( io, 300 ) runten, roben
530
531	IF ( .NOT. constant_diffusion ) THEN
532	IF ( ibc_e_b == 1 ) THEN
533	runten = 'e(0) = e(1)'
534	ELSE
535	runten = 'e(0) = e(1) = (u/0.1)*2'
536	ENDIF
537	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
538
539	WRITE ( io, 301 ) 'e', runten, roben
540
541	ENDIF
542
543	IF ( ocean ) THEN
544	runten = 'sa(0) = sa(1)'
545	IF ( ibc_sa_t == 0 ) THEN
546	roben = 'sa(nzt+1) = sa_surface'
547	ELSE
548	roben = 'sa(nzt+1) = sa(nzt)'
549	ENDIF
550	WRITE ( io, 301 ) 'sa', runten, roben
551	ENDIF
552
553	IF ( humidity ) THEN
554	IF ( ibc_q_b == 0 ) THEN
555	runten = 'q(0) = q_surface'
556	ELSE
557	runten = 'q(0) = q(1)'
558	ENDIF
559	IF ( ibc_q_t == 0 ) THEN
560	roben = 'q(nzt) = q_top'
561	ELSE
562	roben = 'q(nzt) = q(nzt-1) + dq/dz'
563	ENDIF
564	WRITE ( io, 301 ) 'q', runten, roben
565	ENDIF
566
567	IF ( passive_scalar ) THEN
568	IF ( ibc_q_b == 0 ) THEN
569	runten = 's(0) = s_surface'
570	ELSE
571	runten = 's(0) = s(1)'
572	ENDIF
573	IF ( ibc_q_t == 0 ) THEN
574	roben = 's(nzt) = s_top'
575	ELSE
576	roben = 's(nzt) = s(nzt-1) + ds/dz'
577	ENDIF
578	WRITE ( io, 301 ) 's', runten, roben
579	ENDIF
580
581	IF ( use_surface_fluxes ) THEN
582	WRITE ( io, 303 )
583	IF ( constant_heatflux ) THEN
584	WRITE ( io, 306 ) surface_heatflux
585	IF ( random_heatflux ) WRITE ( io, 307 )
586	ENDIF
587	IF ( humidity .AND. constant_waterflux ) THEN
588	WRITE ( io, 311 ) surface_waterflux
589	ENDIF
590	IF ( passive_scalar .AND. constant_waterflux ) THEN
591	WRITE ( io, 313 ) surface_waterflux
592	ENDIF
593	ENDIF
594
595	IF ( use_top_fluxes ) THEN
596	WRITE ( io, 304 )
597	IF ( coupling_mode == 'uncoupled' ) THEN
598	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
599	IF ( constant_top_heatflux ) THEN
600	WRITE ( io, 306 ) top_heatflux
601	ENDIF
602	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
603	WRITE ( io, 316 )
604	ENDIF
605	IF ( ocean .AND. constant_top_salinityflux ) THEN
606	WRITE ( io, 309 ) top_salinityflux
607	ENDIF
608	IF ( humidity .OR. passive_scalar ) THEN
609	WRITE ( io, 315 )
610	ENDIF
611	ENDIF
612
613	IF ( prandtl_layer ) THEN
614	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
615	rif_min, rif_max
616	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
617	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
618	WRITE ( io, 312 )
619	ENDIF
620	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
621	WRITE ( io, 314 )
622	ENDIF
623	ELSE
624	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
625	WRITE ( io, 310 ) rif_min, rif_max
626	ENDIF
627	ENDIF
628
629	WRITE ( io, 317 ) bc_lr, bc_ns
630	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
631	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
632	IF ( turbulent_inflow ) THEN
633	WRITE ( io, 319 ) recycling_width, recycling_plane, &
634	inflow_damping_height, inflow_damping_width
635	ENDIF
636	ENDIF
637
638	!
639	!-- Listing of 1D-profiles
640	WRITE ( io, 325 ) dt_dopr_listing
641	IF ( averaging_interval_pr /= 0.0 ) THEN
642	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
643	ENDIF
644
645	!
646	!-- DATA output
647	WRITE ( io, 330 )
648	IF ( averaging_interval_pr /= 0.0 ) THEN
649	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
650	ENDIF
651
652	!
653	!-- 1D-profiles
654	dopr_chr = 'Pofile:'
655	IF ( dopr_n /= 0 ) THEN
656	WRITE ( io, 331 )
657
658	output_format = ''
659	IF ( netcdf_output ) THEN
660	IF ( netcdf_64bit ) THEN
661	output_format = 'netcdf (64 bit offset)'
662	ELSE
663	output_format = 'netcdf'
664	ENDIF
665	ENDIF
666	IF ( profil_output ) THEN
667	IF ( netcdf_output ) THEN
668	output_format = TRIM( output_format ) // ' and profil'
669	ELSE
670	output_format = 'profil'
671	ENDIF
672	ENDIF
673	WRITE ( io, 345 ) output_format
674
675	DO i = 1, dopr_n
676	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
677	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
678	WRITE ( io, 332 ) dopr_chr
679	dopr_chr = ' :'
680	ENDIF
681	ENDDO
682
683	IF ( dopr_chr /= '' ) THEN
684	WRITE ( io, 332 ) dopr_chr
685	ENDIF
686	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
687	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
688	ENDIF
689
690	!
691	!-- 2D-arrays
692	DO av = 0, 1
693
694	i = 1
695	do2d_xy = ''
696	do2d_xz = ''
697	do2d_yz = ''
698	DO WHILE ( do2d(av,i) /= ' ' )
699
700	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
701	do2d_mode = do2d(av,i)(l-1:l)
702
703	SELECT CASE ( do2d_mode )
704	CASE ( 'xy' )
705	ll = LEN_TRIM( do2d_xy )
706	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
707	CASE ( 'xz' )
708	ll = LEN_TRIM( do2d_xz )
709	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
710	CASE ( 'yz' )
711	ll = LEN_TRIM( do2d_yz )
712	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
713	END SELECT
714
715	i = i + 1
716
717	ENDDO
718
719	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
720	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
721	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
722	( netcdf_output .OR. iso2d_output ) ) THEN
723
724	IF ( av == 0 ) THEN
725	WRITE ( io, 334 ) ''
726	ELSE
727	WRITE ( io, 334 ) '(time-averaged)'
728	ENDIF
729
730	IF ( do2d_at_begin ) THEN
731	begin_chr = 'and at the start'
732	ELSE
733	begin_chr = ''
734	ENDIF
735
736	output_format = ''
737	IF ( netcdf_output ) THEN
738	IF ( netcdf_64bit ) THEN
739	output_format = 'netcdf (64 bit offset)'
740	ELSE
741	output_format = 'netcdf'
742	ENDIF
743	ENDIF
744	IF ( iso2d_output ) THEN
745	IF ( netcdf_output ) THEN
746	output_format = TRIM( output_format ) // ' and iso2d'
747	ELSE
748	output_format = 'iso2d'
749	ENDIF
750	ENDIF
751	WRITE ( io, 345 ) output_format
752
753	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
754	i = 1
755	slices = '/'
756	coordinates = '/'
757	!
758	!-- Building strings with index and coordinate informations of the
759	!-- slices
760	DO WHILE ( section(i,1) /= -9999 )
761
762	WRITE (section_chr,'(I5)') section(i,1)
763	section_chr = ADJUSTL( section_chr )
764	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
765
766	IF ( section(i,1) == -1 ) THEN
767	WRITE (coor_chr,'(F10.1)') -1.0
768	ELSE
769	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
770	ENDIF
771	coor_chr = ADJUSTL( coor_chr )
772	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
773
774	i = i + 1
775	ENDDO
776	IF ( av == 0 ) THEN
777	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
778	TRIM( begin_chr ), 'k', TRIM( slices ), &
779	TRIM( coordinates )
780	IF ( skip_time_do2d_xy /= 0.0 ) THEN
781	WRITE ( io, 339 ) skip_time_do2d_xy
782	ENDIF
783	ELSE
784	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
785	TRIM( begin_chr ), averaging_interval, &
786	dt_averaging_input, 'k', TRIM( slices ), &
787	TRIM( coordinates )
788	IF ( skip_time_data_output_av /= 0.0 ) THEN
789	WRITE ( io, 339 ) skip_time_data_output_av
790	ENDIF
791	ENDIF
792
793	ENDIF
794
795	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
796	i = 1
797	slices = '/'
798	coordinates = '/'
799	!
800	!-- Building strings with index and coordinate informations of the
801	!-- slices
802	DO WHILE ( section(i,2) /= -9999 )
803
804	WRITE (section_chr,'(I5)') section(i,2)
805	section_chr = ADJUSTL( section_chr )
806	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
807
808	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
809	coor_chr = ADJUSTL( coor_chr )
810	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
811
812	i = i + 1
813	ENDDO
814	IF ( av == 0 ) THEN
815	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
816	TRIM( begin_chr ), 'j', TRIM( slices ), &
817	TRIM( coordinates )
818	IF ( skip_time_do2d_xz /= 0.0 ) THEN
819	WRITE ( io, 339 ) skip_time_do2d_xz
820	ENDIF
821	ELSE
822	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
823	TRIM( begin_chr ), averaging_interval, &
824	dt_averaging_input, 'j', TRIM( slices ), &
825	TRIM( coordinates )
826	IF ( skip_time_data_output_av /= 0.0 ) THEN
827	WRITE ( io, 339 ) skip_time_data_output_av
828	ENDIF
829	ENDIF
830	ENDIF
831
832	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
833	i = 1
834	slices = '/'
835	coordinates = '/'
836	!
837	!-- Building strings with index and coordinate informations of the
838	!-- slices
839	DO WHILE ( section(i,3) /= -9999 )
840
841	WRITE (section_chr,'(I5)') section(i,3)
842	section_chr = ADJUSTL( section_chr )
843	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
844
845	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
846	coor_chr = ADJUSTL( coor_chr )
847	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
848
849	i = i + 1
850	ENDDO
851	IF ( av == 0 ) THEN
852	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
853	TRIM( begin_chr ), 'i', TRIM( slices ), &
854	TRIM( coordinates )
855	IF ( skip_time_do2d_yz /= 0.0 ) THEN
856	WRITE ( io, 339 ) skip_time_do2d_yz
857	ENDIF
858	ELSE
859	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
860	TRIM( begin_chr ), averaging_interval, &
861	dt_averaging_input, 'i', TRIM( slices ), &
862	TRIM( coordinates )
863	IF ( skip_time_data_output_av /= 0.0 ) THEN
864	WRITE ( io, 339 ) skip_time_data_output_av
865	ENDIF
866	ENDIF
867	ENDIF
868
869	ENDIF
870
871	ENDDO
872
873	!
874	!-- 3d-arrays
875	DO av = 0, 1
876
877	i = 1
878	do3d_chr = ''
879	DO WHILE ( do3d(av,i) /= ' ' )
880
881	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
882	i = i + 1
883
884	ENDDO
885
886	IF ( do3d_chr /= '' ) THEN
887	IF ( av == 0 ) THEN
888	WRITE ( io, 336 ) ''
889	ELSE
890	WRITE ( io, 336 ) '(time-averaged)'
891	ENDIF
892
893	output_format = ''
894	IF ( netcdf_output ) THEN
895	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
896	output_format = 'netcdf (64 bit offset)'
897	ELSE
898	output_format = 'netcdf'
899	ENDIF
900	ENDIF
901	IF ( avs_output ) THEN
902	IF ( netcdf_output ) THEN
903	output_format = TRIM( output_format ) // ' and avs'
904	ELSE
905	output_format = 'avs'
906	ENDIF
907	ENDIF
908	WRITE ( io, 345 ) output_format
909
910	IF ( do3d_at_begin ) THEN
911	begin_chr = 'and at the start'
912	ELSE
913	begin_chr = ''
914	ENDIF
915	IF ( av == 0 ) THEN
916	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
917	zu(nz_do3d), nz_do3d
918	ELSE
919	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
920	TRIM( begin_chr ), averaging_interval, &
921	dt_averaging_input, zu(nz_do3d), nz_do3d
922	ENDIF
923
924	IF ( do3d_compress ) THEN
925	do3d_chr = ''
926	i = 1
927	DO WHILE ( do3d(av,i) /= ' ' )
928
929	SELECT CASE ( do3d(av,i) )
930	CASE ( 'u' )
931	j = 1
932	CASE ( 'v' )
933	j = 2
934	CASE ( 'w' )
935	j = 3
936	CASE ( 'p' )
937	j = 4
938	CASE ( 'pt' )
939	j = 5
940	END SELECT
941	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
942	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
943	':' // prec // ','
944	i = i + 1
945
946	ENDDO
947	WRITE ( io, 338 ) do3d_chr
948
949	ENDIF
950
951	IF ( av == 0 ) THEN
952	IF ( skip_time_do3d /= 0.0 ) THEN
953	WRITE ( io, 339 ) skip_time_do3d
954	ENDIF
955	ELSE
956	IF ( skip_time_data_output_av /= 0.0 ) THEN
957	WRITE ( io, 339 ) skip_time_data_output_av
958	ENDIF
959	ENDIF
960
961	ENDIF
962
963	ENDDO
964
965	!
966	!-- Timeseries
967	IF ( dt_dots /= 9999999.9 ) THEN
968	WRITE ( io, 340 )
969
970	output_format = ''
971	IF ( netcdf_output ) THEN
972	IF ( netcdf_64bit ) THEN
973	output_format = 'netcdf (64 bit offset)'
974	ELSE
975	output_format = 'netcdf'
976	ENDIF
977	ENDIF
978	IF ( profil_output ) THEN
979	IF ( netcdf_output ) THEN
980	output_format = TRIM( output_format ) // ' and profil'
981	ELSE
982	output_format = 'profil'
983	ENDIF
984	ENDIF
985	WRITE ( io, 345 ) output_format
986	WRITE ( io, 341 ) dt_dots
987	ENDIF
988
989	#if defined( __dvrp_graphics )
990	!
991	!-- Dvrp-output
992	IF ( dt_dvrp /= 9999999.9 ) THEN
993	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
994	TRIM( dvrp_username ), TRIM( dvrp_directory )
995	i = 1
996	l = 0
997	DO WHILE ( mode_dvrp(i) /= ' ' )
998	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
999	READ ( mode_dvrp(i), '(10X,I2)' ) j
1000	l = l + 1
1001	IF ( do3d(0,j) /= ' ' ) THEN
1002	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
1003	ENDIF
1004	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1005	READ ( mode_dvrp(i), '(6X,I2)' ) j
1006	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
1007	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1008	WRITE ( io, 363 )
1009	ENDIF
1010	i = i + 1
1011	ENDDO
1012
1013	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
1014	WRITE ( io, 364 ) cluster_size
1015	ENDIF
1016
1017	ENDIF
1018	#endif
1019
1020	#if defined( __spectra )
1021	!
1022	!-- Spectra output
1023	IF ( dt_dosp /= 9999999.9 ) THEN
1024	WRITE ( io, 370 )
1025
1026	output_format = ''
1027	IF ( netcdf_output ) THEN
1028	IF ( netcdf_64bit ) THEN
1029	output_format = 'netcdf (64 bit offset)'
1030	ELSE
1031	output_format = 'netcdf'
1032	ENDIF
1033	ENDIF
1034	IF ( profil_output ) THEN
1035	IF ( netcdf_output ) THEN
1036	output_format = TRIM( output_format ) // ' and profil'
1037	ELSE
1038	output_format = 'profil'
1039	ENDIF
1040	ENDIF
1041	WRITE ( io, 345 ) output_format
1042	WRITE ( io, 371 ) dt_dosp
1043	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1044	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1045	( spectra_direction(i), i = 1,10 ), &
1046	( comp_spectra_level(i), i = 1,100 ), &
1047	( plot_spectra_level(i), i = 1,100 ), &
1048	averaging_interval_sp, dt_averaging_input_pr
1049	ENDIF
1050	#endif
1051
1052	WRITE ( io, 99 )
1053
1054	!
1055	!-- Physical quantities
1056	WRITE ( io, 400 )
1057
1058	!
1059	!-- Geostrophic parameters
1060	WRITE ( io, 410 ) omega, phi, f, fs
1061
1062	!
1063	!-- Other quantities
1064	WRITE ( io, 411 ) g
1065	IF ( use_reference ) THEN
1066	IF ( ocean ) THEN
1067	WRITE ( io, 412 ) prho_reference
1068	ELSE
1069	WRITE ( io, 413 ) pt_reference
1070	ENDIF
1071	ENDIF
1072
1073	!
1074	!-- Cloud physics parameters
1075	IF ( cloud_physics ) THEN
1076	WRITE ( io, 415 )
1077	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1078	ENDIF
1079
1080	!-- Profile of the geostrophic wind (component ug)
1081	!-- Building output strings
1082	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1083	gradients = '------'
1084	slices = ' 0'
1085	coordinates = ' 0.0'
1086	i = 1
1087	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1088
1089	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1090	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1091
1092	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1093	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1094
1095	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1096	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1097
1098	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1099	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1100
1101	i = i + 1
1102	ENDDO
1103
1104	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1105	TRIM( gradients ), TRIM( slices )
1106
1107	!-- Profile of the geostrophic wind (component vg)
1108	!-- Building output strings
1109	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1110	gradients = '------'
1111	slices = ' 0'
1112	coordinates = ' 0.0'
1113	i = 1
1114	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1115
1116	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1117	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1118
1119	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1120	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1121
1122	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1123	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1124
1125	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1126	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1127
1128	i = i + 1
1129	ENDDO
1130
1131	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1132	TRIM( gradients ), TRIM( slices )
1133
1134	!
1135	!-- Initial temperature profile
1136	!-- Building output strings, starting with surface temperature
1137	WRITE ( temperatures, '(F6.2)' ) pt_surface
1138	gradients = '------'
1139	slices = ' 0'
1140	coordinates = ' 0.0'
1141	i = 1
1142	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1143
1144	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1145	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1146
1147	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1148	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1149
1150	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1151	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1152
1153	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1154	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1155
1156	i = i + 1
1157	ENDDO
1158
1159	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1160	TRIM( gradients ), TRIM( slices )
1161
1162	!
1163	!-- Initial humidity profile
1164	!-- Building output strings, starting with surface humidity
1165	IF ( humidity .OR. passive_scalar ) THEN
1166	WRITE ( temperatures, '(E8.1)' ) q_surface
1167	gradients = '--------'
1168	slices = ' 0'
1169	coordinates = ' 0.0'
1170	i = 1
1171	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1172
1173	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1174	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1175
1176	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1177	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1178
1179	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1180	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1181
1182	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1183	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1184
1185	i = i + 1
1186	ENDDO
1187
1188	IF ( humidity ) THEN
1189	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1190	TRIM( gradients ), TRIM( slices )
1191	ELSE
1192	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1193	TRIM( gradients ), TRIM( slices )
1194	ENDIF
1195	ENDIF
1196
1197	!
1198	!-- Initial salinity profile
1199	!-- Building output strings, starting with surface salinity
1200	IF ( ocean ) THEN
1201	WRITE ( temperatures, '(F6.2)' ) sa_surface
1202	gradients = '------'
1203	slices = ' 0'
1204	coordinates = ' 0.0'
1205	i = 1
1206	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1207
1208	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1209	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1210
1211	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1212	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1213
1214	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1215	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1216
1217	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1218	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1219
1220	i = i + 1
1221	ENDDO
1222
1223	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1224	TRIM( gradients ), TRIM( slices )
1225	ENDIF
1226
1227	!
1228	!-- LES / turbulence parameters
1229	WRITE ( io, 450 )
1230
1231	!--
1232	! ... LES-constants used must still be added here
1233	!--
1234	IF ( constant_diffusion ) THEN
1235	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1236	prandtl_number
1237	ENDIF
1238	IF ( .NOT. constant_diffusion) THEN
1239	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1240	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1241	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1242	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1243	ENDIF
1244
1245	!
1246	!-- Special actions during the run
1247	WRITE ( io, 470 )
1248	IF ( create_disturbances ) THEN
1249	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1250	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1251	zu(disturbance_level_ind_t), disturbance_level_ind_t
1252	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1253	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1254	ELSE
1255	WRITE ( io, 473 ) disturbance_energy_limit
1256	ENDIF
1257	WRITE ( io, 474 ) TRIM( random_generator )
1258	ENDIF
1259	IF ( pt_surface_initial_change /= 0.0 ) THEN
1260	WRITE ( io, 475 ) pt_surface_initial_change
1261	ENDIF
1262	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1263	WRITE ( io, 476 ) q_surface_initial_change
1264	ENDIF
1265	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1266	WRITE ( io, 477 ) q_surface_initial_change
1267	ENDIF
1268
1269	IF ( particle_advection ) THEN
1270	!
1271	!-- Particle attributes
1272	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1273	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1274	end_time_prel, dt_sort_particles
1275	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1276	IF ( random_start_position ) WRITE ( io, 481 )
1277	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1278	WRITE ( io, 495 ) total_number_of_particles
1279	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1280	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1281	WRITE ( io, 483 ) maximum_number_of_tailpoints
1282	IF ( minimum_tailpoint_distance /= 0 ) THEN
1283	WRITE ( io, 484 ) total_number_of_tails, &
1284	minimum_tailpoint_distance, &
1285	maximum_tailpoint_age
1286	ENDIF
1287	ENDIF
1288	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1289	WRITE ( io, 485 ) dt_write_particle_data
1290	output_format = ''
1291	IF ( netcdf_output ) THEN
1292	IF ( netcdf_64bit ) THEN
1293	output_format = 'netcdf (64 bit offset) and binary'
1294	ELSE
1295	output_format = 'netcdf and binary'
1296	ENDIF
1297	ELSE
1298	output_format = 'binary'
1299	ENDIF
1300	WRITE ( io, 345 ) output_format
1301	ENDIF
1302	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1303	IF ( write_particle_statistics ) WRITE ( io, 486 )
1304
1305	WRITE ( io, 487 ) number_of_particle_groups
1306
1307	DO i = 1, number_of_particle_groups
1308	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1309	WRITE ( io, 490 ) i, 0.0
1310	WRITE ( io, 492 )
1311	ELSE
1312	WRITE ( io, 490 ) i, radius(i)
1313	IF ( density_ratio(i) /= 0.0 ) THEN
1314	WRITE ( io, 491 ) density_ratio(i)
1315	ELSE
1316	WRITE ( io, 492 )
1317	ENDIF
1318	ENDIF
1319	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1320	pdx(i), pdy(i), pdz(i)
1321	ENDDO
1322
1323	ENDIF
1324
1325
1326	!
1327	!-- Parameters of 1D-model
1328	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1329	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1330	mixing_length_1d, dissipation_1d
1331	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1332	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1333	ENDIF
1334	ENDIF
1335
1336	!
1337	!-- User-defined informations
1338	CALL user_header( io )
1339
1340	WRITE ( io, 99 )
1341
1342	!
1343	!-- Write buffer contents to disc immediately
1344	CALL local_flush( io )
1345
1346	!
1347	!-- Here the FORMATs start
1348
1349	99 FORMAT (1X,78('-'))
1350	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1351	1X,'* ',A,' *',9X,A/ &
1352	1X,'***************************',9X,42('-'))
1353	101 FORMAT (37X,'coupled run: ',A/ &
1354	37X,42('-'))
1355	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1356	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1357	' Run on host: ',A10)
1358	#if defined( __parallel )
1359	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1360	')',1X,A)
1361	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1362	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1363	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1364	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1365	37X,'because the job is running on an SMP-cluster')
1366	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1367	#endif
1368	110 FORMAT (/' Numerical Schemes:'/ &
1369	' -----------------'/)
1370	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1371	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1372	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1373	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1374	' or Upstream')
1375	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1376	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1377	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1378	' or Upstream')
1379	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1380	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1381	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1382	' Translation velocity = ',A/ &
1383	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1384	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1385	' of timestep changes)')
1386	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1387	' timestep changes')
1388	122 FORMAT (' --> Time differencing scheme: ',A)
1389	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1390	' maximum damping coefficient: ',F5.3, ' 1/s')
1391	124 FORMAT (' Spline-overshoots are being suppressed')
1392	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1393	' of'/ &
1394	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1395	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1396	' of'/ &
1397	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1398	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1399	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1400	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1401	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1402	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1403	130 FORMAT (' --> Additional prognostic equation for the total water content')
1404	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1405	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1406	' effective emissivity scheme')
1407	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1408	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1409	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1410	A,'-cycle)'/ &
1411	' number of grid levels: ',I2/ &
1412	' Gauss-Seidel red/black iterations: ',I2)
1413	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1414	I3,')')
1415	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1416	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1417	I3,')'/ &
1418	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1419	I3,')')
1420	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1421	139 FORMAT (' --> Loop optimization method: ',A)
1422	140 FORMAT (' maximum residual allowed: ',E10.3)
1423	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1424	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1425	'step')
1426	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1427	'kinetic energy')
1428	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1429	'conserved'/ &
1430	' using the ',A,' mode')
1431	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1432	152 FORMAT (' --> External pressure gradient directly prescribed by the user:'/, &
1433	2(1X,E12.5),'Pa/m', &
1434	' in x/y direction starting from dp_level_b =', F6.3, 'm', &
1435	A /)
1436	200 FORMAT (//' Run time and time step information:'/ &
1437	' ----------------------------------'/)
1438	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1439	' CFL-factor: ',F4.2)
1440	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1441	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1442	' End time: ',F9.3,' s')
1443	204 FORMAT ( A,F9.3,' s')
1444	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1445	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1446	' CPU-time used: ',F9.3,' s per timestep: ', &
1447	' ',F9.3,' s'/ &
1448	' per second of simulated tim', &
1449	'e: ',F9.3,' s')
1450	250 FORMAT (//' Computational grid and domain size:'/ &
1451	' ----------------------------------'// &
1452	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1453	' m dz = ',F7.3,' m'/ &
1454	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1455	' m z(u) = ',F10.3,' m'/)
1456	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1457	' factor: ',F5.3/ &
1458	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1459	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1460	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1461	255 FORMAT (' Subdomains have equal size')
1462	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1463	'have smaller sizes'/ &
1464	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1465	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1466	' degrees')
1467	270 FORMAT (//' Topography informations:'/ &
1468	' -----------------------'// &
1469	1X,'Topography: ',A)
1470	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1471	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1472	' / ',I4)
1473	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1474	' direction' / &
1475	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1476	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1477	278 FORMAT (' Topography grid definition convention:'/ &
1478	' cell edge (staggered grid points'/ &
1479	' (u in x-direction, v in y-direction))' /)
1480	279 FORMAT (' Topography grid definition convention:'/ &
1481	' cell center (scalar grid points)' /)
1482	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1483	' ------------------------------'// &
1484	' Canopy mode: ', A / &
1485	' Canopy top: ',I4 / &
1486	' Leaf drag coefficient: ',F6.2 /)
1487	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1488	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1489	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1490	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1491	' Height: ',A,' m'/ &
1492	' Leaf area density: ',A,' m2/m3'/ &
1493	' Gradient: ',A,' m2/m4'/ &
1494	' Gridpoint: ',A)
1495
1496	300 FORMAT (//' Boundary conditions:'/ &
1497	' -------------------'// &
1498	' p uv ', &
1499	' pt'// &
1500	' B. bound.: ',A/ &
1501	' T. bound.: ',A)
1502	301 FORMAT (/' ',A// &
1503	' B. bound.: ',A/ &
1504	' T. bound.: ',A)
1505	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1506	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1507	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1508	'computational u,v-level:'// &
1509	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1510	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1511	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1512	307 FORMAT (' Heatflux has a random normal distribution')
1513	308 FORMAT (' Predefined surface temperature')
1514	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1515	310 FORMAT (//' 1D-Model:'// &
1516	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1517	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1518	312 FORMAT (' Predefined surface humidity')
1519	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1520	314 FORMAT (' Predefined scalar value at the surface')
1521	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1522	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1523	'atmosphere model')
1524	317 FORMAT (//' Lateral boundaries:'/ &
1525	' left/right: ',A/ &
1526	' north/south: ',A)
1527	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1528	'max =',F5.1,' m**2/s')
1529	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1530	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1531	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1532	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1533	' v: ',F9.6,' m2/s2')
1534	325 FORMAT (//' List output:'/ &
1535	' -----------'// &
1536	' 1D-Profiles:'/ &
1537	' Output every ',F8.2,' s')
1538	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1539	' Averaging input every ',F8.2,' s')
1540	330 FORMAT (//' Data output:'/ &
1541	' -----------'/)
1542	331 FORMAT (/' 1D-Profiles:')
1543	332 FORMAT (/' ',A)
1544	333 FORMAT (' Output every ',F8.2,' s',/ &
1545	' Time averaged over ',F8.2,' s'/ &
1546	' Averaging input every ',F8.2,' s')
1547	334 FORMAT (/' 2D-Arrays',A,':')
1548	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1549	' Output every ',F8.2,' s ',A/ &
1550	' Cross sections at ',A1,' = ',A/ &
1551	' scalar-coordinates: ',A,' m'/)
1552	336 FORMAT (/' 3D-Arrays',A,':')
1553	337 FORMAT (/' Arrays: ',A/ &
1554	' Output every ',F8.2,' s ',A/ &
1555	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1556	338 FORMAT (' Compressed data output'/ &
1557	' Decimal precision: ',A/)
1558	339 FORMAT (' No output during initial ',F8.2,' s')
1559	340 FORMAT (/' Time series:')
1560	341 FORMAT (' Output every ',F8.2,' s'/)
1561	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1562	' Output every ',F8.2,' s ',A/ &
1563	' Time averaged over ',F8.2,' s'/ &
1564	' Averaging input every ',F8.2,' s'/ &
1565	' Cross sections at ',A1,' = ',A/ &
1566	' scalar-coordinates: ',A,' m'/)
1567	343 FORMAT (/' Arrays: ',A/ &
1568	' Output every ',F8.2,' s ',A/ &
1569	' Time averaged over ',F8.2,' s'/ &
1570	' Averaging input every ',F8.2,' s'/ &
1571	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1572	345 FORMAT (' Output format: ',A/)
1573	#if defined( __dvrp_graphics )
1574	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1575	' Output every ',F7.1,' s'/ &
1576	' Output mode: ',A/ &
1577	' Host / User: ',A,' / ',A/ &
1578	' Directory: ',A// &
1579	' The sequence contains:')
1580	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1581	362 FORMAT (' Sectional plane ',A)
1582	363 FORMAT (' Particles')
1583	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
1584	#endif
1585	#if defined( __spectra )
1586	370 FORMAT (' Spectra:')
1587	371 FORMAT (' Output every ',F7.1,' s'/)
1588	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1589	' Directions: ', 10(A5,',')/ &
1590	' height levels k = ', 20(I3,',')/ &
1591	' ', 20(I3,',')/ &
1592	' ', 20(I3,',')/ &
1593	' ', 20(I3,',')/ &
1594	' ', 19(I3,','),I3,'.'/ &
1595	' height levels selected for standard plot:'/ &
1596	' k = ', 20(I3,',')/ &
1597	' ', 20(I3,',')/ &
1598	' ', 20(I3,',')/ &
1599	' ', 20(I3,',')/ &
1600	' ', 19(I3,','),I3,'.'/ &
1601	' Time averaged over ', F7.1, ' s,' / &
1602	' Profiles for the time averaging are taken every ', &
1603	F6.1,' s')
1604	#endif
1605	400 FORMAT (//' Physical quantities:'/ &
1606	' -------------------'/)
1607	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1608	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1609	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1610	' f* = ',F9.6,' 1/s')
1611	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1612	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1613	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1614	415 FORMAT (/' Cloud physics parameters:'/ &
1615	' ------------------------'/)
1616	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1617	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1618	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1619	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1620	' Vapourization heat : L_v = ',E8.2,' J/kg')
1621	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1622	' Height: ',A,' m'/ &
1623	' Temperature: ',A,' K'/ &
1624	' Gradient: ',A,' K/100m'/ &
1625	' Gridpoint: ',A)
1626	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1627	' Height: ',A,' m'/ &
1628	' Humidity: ',A,' kg/kg'/ &
1629	' Gradient: ',A,' (kg/kg)/100m'/ &
1630	' Gridpoint: ',A)
1631	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1632	' Height: ',A,' m'/ &
1633	' Scalar concentration: ',A,' kg/m**3'/ &
1634	' Gradient: ',A,' (kg/m**3)/100m'/ &
1635	' Gridpoint: ',A)
1636	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1637	' Height: ',A,' m'/ &
1638	' ug: ',A,' m/s'/ &
1639	' Gradient: ',A,' 1/100s'/ &
1640	' Gridpoint: ',A)
1641	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1642	' Height: ',A,' m'/ &
1643	' vg: ',A,' m/s'/ &
1644	' Gradient: ',A,' 1/100s'/ &
1645	' Gridpoint: ',A)
1646	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1647	' Height: ',A,' m'/ &
1648	' Salinity: ',A,' psu'/ &
1649	' Gradient: ',A,' psu/100m'/ &
1650	' Gridpoint: ',A)
1651	450 FORMAT (//' LES / Turbulence quantities:'/ &
1652	' ---------------------------'/)
1653	451 FORMAT (' Diffusion coefficients are constant:'/ &
1654	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1655	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1656	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1657	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1658	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1659	470 FORMAT (//' Actions during the simulation:'/ &
1660	' -----------------------------'/)
1661	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1662	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1663	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1664	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1665	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1666	' to i/j =',I4)
1667	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1668	1X,F5.3, ' m2/s2')
1669	474 FORMAT (' Random number generator used : ',A/)
1670	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1671	'respectively, if'/ &
1672	' the value is negative) by ',F5.2,' K at the beginning of the',&
1673	' 3D-simulation'/)
1674	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1675	'respectively, if the'/ &
1676	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1677	' the 3D-simulation'/)
1678	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1679	'respectively, if the'/ &
1680	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1681	' the 3D-simulation'/)
1682	480 FORMAT (' Particles:'/ &
1683	' ---------'// &
1684	' Particle advection is active (switched on at t = ', F7.1, &
1685	' s)'/ &
1686	' Start of new particle generations every ',F6.1,' s'/ &
1687	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1688	' bottom: ', A, ' top: ', A/&
1689	' Maximum particle age: ',F9.1,' s'/ &
1690	' Advection stopped at t = ',F9.1,' s'/ &
1691	' Particles are sorted every ',F9.1,' s'/)
1692	481 FORMAT (' Particles have random start positions'/)
1693	482 FORMAT (' Particles are advected only horizontally'/)
1694	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1695	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1696	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1697	' Maximum age of the end of the tail: ',F8.2,' s')
1698	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1699	486 FORMAT (' Particle statistics are written on file'/)
1700	487 FORMAT (' Number of particle groups: ',I2/)
1701	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1702	' minimum timestep for advection: ', F7.5/)
1703	489 FORMAT (' Number of particles simultaneously released at each ', &
1704	'point: ', I5/)
1705	490 FORMAT (' Particle group ',I2,':'/ &
1706	' Particle radius: ',E10.3, 'm')
1707	491 FORMAT (' Particle inertia is activated'/ &
1708	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1709	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1710	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1711	' y:',F8.1,' - ',F8.1,' m'/&
1712	' z:',F8.1,' - ',F8.1,' m'/&
1713	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1714	' m dz = ',F8.1,' m'/)
1715	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1716	F8.2,' s'/)
1717	495 FORMAT (' Number of particles in total domain: ',I10/)
1718	500 FORMAT (//' 1D-Model parameters:'/ &
1719	' -------------------'// &
1720	' Simulation time: ',F8.1,' s'/ &
1721	' Run-controll output every: ',F8.1,' s'/ &
1722	' Vertical profile output every: ',F8.1,' s'/ &
1723	' Mixing length calculation: ',A/ &
1724	' Dissipation calculation: ',A/)
1725	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1726
1727
1728	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |