Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 2265

Last change on this file since 2265 was 2259, checked in by gronemeier, 7 years ago
Implemented synthetic turbulence generator
Property svn:keywords set to `Id`
File size: 90.6 KB

Line
1	!> @file header.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2017 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 2259 2017-06-08 09:09:11Z schwenkel $
27	! Implemented synthetic turbulence generator
28	!
29	! 2258 2017-06-08 07:55:13Z suehring
30	! Bugfix, add pre-preprocessor directives to enable non-parrallel mode
31	!
32	! 2233 2017-05-30 18:08:54Z suehring
33	!
34	! 2232 2017-05-30 17:47:52Z suehring
35	! Adjustments to new topography and surface concept
36	! Generic tunnel setup added
37	!
38	! 2200 2017-04-11 11:37:51Z suehring
39	! monotonic_adjustment removed
40	!
41	! 2118 2017-01-17 16:38:49Z raasch
42	! OpenACC relatec code removed
43	!
44	! 2073 2016-11-30 14:34:05Z raasch
45	! small bugfix concerning output of scalar profiles
46	!
47	! 2050 2016-11-08 15:00:55Z gronemeier
48	! Implement turbulent outflow condition
49	!
50	! 2037 2016-10-26 11:15:40Z knoop
51	! Anelastic approximation implemented
52	!
53	! 2000 2016-08-20 18:09:15Z knoop
54	! Forced header and separation lines into 80 columns
55	!
56	! 1992 2016-08-12 15:14:59Z suehring
57	! Adapted for top_scalarflux
58	!
59	! 1960 2016-07-12 16:34:24Z suehring
60	! Treat humidity and passive scalar separately.
61	! Modify misleading information concerning humidity.
62	! Bugfix, change unit for humidity flux.
63	!
64	! 1957 2016-07-07 10:43:48Z suehring
65	! flight module added
66	!
67	! 1931 2016-06-10 12:06:59Z suehring
68	! Rename multigrid into multigrid_noopt
69	!
70	! 1902 2016-05-09 11:18:56Z suehring
71	! Write information about masking_method only for multigrid solver
72	!
73	! 1849 2016-04-08 11:33:18Z hoffmann
74	! Adapted for modularization of microphysics
75	!
76	! 1833 2016-04-07 14:23:03Z raasch
77	! spectrum renamed spectra_mod, output of spectra related quantities moved to
78	! spectra_mod
79	!
80	! 1831 2016-04-07 13:15:51Z hoffmann
81	! turbulence renamed collision_turbulence,
82	! drizzle renamed cloud_water_sedimentation
83	!
84	! 1826 2016-04-07 12:01:39Z maronga
85	! Moved radiation model header output to the respective module.
86	! Moved canopy model header output to the respective module.
87	!
88	! 1822 2016-04-07 07:49:42Z hoffmann
89	! Tails removed. icloud_scheme replaced by microphysics_*
90	!
91	! 1817 2016-04-06 15:44:20Z maronga
92	! Moved land_surface_model header output to the respective module.
93	!
94	! 1808 2016-04-05 19:44:00Z raasch
95	! routine local_flush replaced by FORTRAN statement
96	!
97	! 1797 2016-03-21 16:50:28Z raasch
98	! output of nesting datatransfer mode
99	!
100	! 1791 2016-03-11 10:41:25Z raasch
101	! output of nesting informations of all domains
102	!
103	! 1788 2016-03-10 11:01:04Z maronga
104	! Parameter dewfall removed
105	!
106	! 1786 2016-03-08 05:49:27Z raasch
107	! cpp-direktives for spectra removed
108	!
109	! 1783 2016-03-06 18:36:17Z raasch
110	! netcdf module and variable names changed, output of netcdf_deflate
111	!
112	! 1764 2016-02-28 12:45:19Z raasch
113	! output of nesting informations
114	!
115	! 1697 2015-10-28 17:14:10Z raasch
116	! small E- and F-FORMAT changes to avoid informative compiler messages about
117	! insufficient field width
118	!
119	! 1691 2015-10-26 16:17:44Z maronga
120	! Renamed prandtl_layer to constant_flux_layer, renames rif_min/rif_max to
121	! zeta_min/zeta_max.
122	!
123	! 1682 2015-10-07 23:56:08Z knoop
124	! Code annotations made doxygen readable
125	!
126	! 1675 2015-10-02 08:28:59Z gronemeier
127	! Bugfix: Definition of topography grid levels
128	!
129	! 1660 2015-09-21 08:15:16Z gronemeier
130	! Bugfix: Definition of building/street canyon height if vertical grid stretching
131	! starts below the maximum topography height.
132	!
133	! 1590 2015-05-08 13:56:27Z maronga
134	! Bugfix: Added TRIM statements for character strings for LSM and radiation code
135	!
136	! 1585 2015-04-30 07:05:52Z maronga
137	! Further output for radiation model(s).
138	!
139	! 1575 2015-03-27 09:56:27Z raasch
140	! adjustments for psolver-queries, output of seed_follows_topography
141	!
142	! 1560 2015-03-06 10:48:54Z keck
143	! output for recycling y shift
144	!
145	! 1557 2015-03-05 16:43:04Z suehring
146	! output for monotonic limiter
147	!
148	! 1551 2015-03-03 14:18:16Z maronga
149	! Added informal output for land surface model and radiation model. Removed typo.
150	!
151	! 1496 2014-12-02 17:25:50Z maronga
152	! Renamed: "radiation -> "cloud_top_radiation"
153	!
154	! 1484 2014-10-21 10:53:05Z kanani
155	! Changes due to new module structure of the plant canopy model:
156	! module plant_canopy_model_mod and output for new canopy model parameters
157	! (alpha_lad, beta_lad, lai_beta,...) added,
158	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
159	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff,
160	! learde renamed leaf_area_density.
161	! Bugfix: DO-WHILE-loop for lad header information additionally restricted
162	! by maximum number of gradient levels (currently 10)
163	!
164	! 1482 2014-10-18 12:34:45Z raasch
165	! information about calculated or predefined virtual processor topology adjusted
166	!
167	! 1468 2014-09-24 14:06:57Z maronga
168	! Adapted for use on up to 6-digit processor cores
169	!
170	! 1429 2014-07-15 12:53:45Z knoop
171	! header exended to provide ensemble_member_nr if specified
172	!
173	! 1376 2014-04-26 11:21:22Z boeske
174	! Correction of typos
175	!
176	! 1365 2014-04-22 15:03:56Z boeske
177	! New section 'Large scale forcing and nudging':
178	! output of large scale forcing and nudging information,
179	! new section for initial profiles created
180	!
181	! 1359 2014-04-11 17:15:14Z hoffmann
182	! dt_sort_particles removed
183	!
184	! 1353 2014-04-08 15:21:23Z heinze
185	! REAL constants provided with KIND-attribute
186	!
187	! 1327 2014-03-21 11:00:16Z raasch
188	! parts concerning iso2d and avs output removed,
189	! -netcdf output queries
190	!
191	! 1324 2014-03-21 09:13:16Z suehring
192	! Bugfix: module spectrum added
193	!
194	! 1322 2014-03-20 16:38:49Z raasch
195	! REAL functions provided with KIND-attribute,
196	! some REAL constants defined as wp-kind
197	!
198	! 1320 2014-03-20 08:40:49Z raasch
199	! ONLY-attribute added to USE-statements,
200	! kind-parameters added to all INTEGER and REAL declaration statements,
201	! kinds are defined in new module kinds,
202	! revision history before 2012 removed,
203	! comment fields (!:) to be used for variable explanations added to
204	! all variable declaration statements
205	!
206	! 1308 2014-03-13 14:58:42Z fricke
207	! output of the fixed number of output time levels
208	! output_format adjusted for masked data if netcdf_data_format > 5
209	!
210	! 1299 2014-03-06 13:15:21Z heinze
211	! output for using large_scale subsidence in combination
212	! with large_scale_forcing
213	! reformatting, more detailed explanations
214	!
215	! 1241 2013-10-30 11:36:58Z heinze
216	! output for nudging + large scale forcing from external file
217	!
218	! 1216 2013-08-26 09:31:42Z raasch
219	! output for transpose_compute_overlap
220	!
221	! 1212 2013-08-15 08:46:27Z raasch
222	! output for poisfft_hybrid removed
223	!
224	! 1179 2013-06-14 05:57:58Z raasch
225	! output of reference_state, use_reference renamed use_single_reference_value
226	!
227	! 1159 2013-05-21 11:58:22Z fricke
228	! +use_cmax
229	!
230	! 1115 2013-03-26 18:16:16Z hoffmann
231	! descriptions for Seifert-Beheng-cloud-physics-scheme added
232	!
233	! 1111 2013-03-08 23:54:10Z raasch
234	! output of accelerator board information
235	! ibc_p_b = 2 removed
236	!
237	! 1108 2013-03-05 07:03:32Z raasch
238	! bugfix for r1106
239	!
240	! 1106 2013-03-04 05:31:38Z raasch
241	! some format changes for coupled runs
242	!
243	! 1092 2013-02-02 11:24:22Z raasch
244	! unused variables removed
245	!
246	! 1036 2012-10-22 13:43:42Z raasch
247	! code put under GPL (PALM 3.9)
248	!
249	! 1031 2012-10-19 14:35:30Z raasch
250	! output of netCDF data format modified
251	!
252	! 1015 2012-09-27 09:23:24Z raasch
253	! output of Adjustment of mixing length to the Prandtl mixing length at first
254	! grid point above ground removed
255	!
256	! 1003 2012-09-14 14:35:53Z raasch
257	! output of information about equal/unequal subdomain size removed
258	!
259	! 1001 2012-09-13 14:08:46Z raasch
260	! all actions concerning leapfrog- and upstream-spline-scheme removed
261	!
262	! 978 2012-08-09 08:28:32Z fricke
263	! -km_damp_max, outflow_damping_width
264	! +pt_damping_factor, pt_damping_width
265	! +z0h
266	!
267	! 964 2012-07-26 09:14:24Z raasch
268	! output of profil-related quantities removed
269	!
270	! 940 2012-07-09 14:31:00Z raasch
271	! Output in case of simulations for pure neutral stratification (no pt-equation
272	! solved)
273	!
274	! 927 2012-06-06 19:15:04Z raasch
275	! output of masking_method for mg-solver
276	!
277	! 868 2012-03-28 12:21:07Z raasch
278	! translation velocity in Galilean transformation changed to 0.6 * ug
279	!
280	! 833 2012-02-22 08:55:55Z maronga
281	! Adjusted format for leaf area density
282	!
283	! 828 2012-02-21 12:00:36Z raasch
284	! output of dissipation_classes + radius_classes
285	!
286	! 825 2012-02-19 03:03:44Z raasch
287	! Output of cloud physics parameters/quantities complemented and restructured
288	!
289	! Revision 1.1 1997/08/11 06:17:20 raasch
290	! Initial revision
291	!
292	!
293	! Description:
294	! ------------
295	!> Writing a header with all important information about the current run.
296	!> This subroutine is called three times, two times at the beginning
297	!> (writing information on files RUN_CONTROL and HEADER) and one time at the
298	!> end of the run, then writing additional information about CPU-usage on file
299	!> header.
300	!-----------------------------------------------------------------------------!
301	SUBROUTINE header
302
303
304	USE arrays_3d, &
305	ONLY: pt_init, q_init, s_init, sa_init, ug, vg, w_subs, zu, zw
306
307	USE control_parameters
308
309	USE cloud_parameters, &
310	ONLY: cp, l_v, r_d
311
312	USE cpulog, &
313	ONLY: log_point_s
314
315	USE dvrp_variables, &
316	ONLY: use_seperate_pe_for_dvrp_output
317
318	USE flight_mod, &
319	ONLY: flight_header
320
321	USE grid_variables, &
322	ONLY: dx, dy
323
324	USE indices, &
325	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
326	nys_mg, nzt, nzt_mg
327
328	USE kinds
329
330	USE land_surface_model_mod, &
331	ONLY: lsm_header
332
333	USE microphysics_mod, &
334	ONLY: cloud_water_sedimentation, collision_turbulence, &
335	c_sedimentation, limiter_sedimentation, nc_const, &
336	ventilation_effect
337
338	USE model_1d, &
339	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
340
341	USE netcdf_interface, &
342	ONLY: netcdf_data_format, netcdf_data_format_string, netcdf_deflate
343
344	USE particle_attributes, &
345	ONLY: bc_par_b, bc_par_lr, bc_par_ns, bc_par_t, collision_kernel, &
346	curvature_solution_effects, &
347	density_ratio, dissipation_classes, dt_min_part, dt_prel, &
348	dt_write_particle_data, end_time_prel, &
349	number_of_particle_groups, particle_advection, &
350	particle_advection_start, &
351	particles_per_point, pdx, pdy, pdz, psb, psl, psn, psr, pss, &
352	pst, radius, radius_classes, random_start_position, &
353	seed_follows_topography, &
354	total_number_of_particles, use_sgs_for_particles, &
355	vertical_particle_advection, write_particle_statistics
356
357	USE pegrid
358
359	USE plant_canopy_model_mod, &
360	ONLY: pcm_header, plant_canopy
361
362	USE pmc_handle_communicator, &
363	ONLY: pmc_get_model_info
364
365	USE pmc_interface, &
366	ONLY: nested_run, nesting_datatransfer_mode, nesting_mode
367
368	USE radiation_model_mod, &
369	ONLY: radiation, radiation_header
370
371	USE spectra_mod, &
372	ONLY: calculate_spectra, spectra_header
373
374	USE surface_mod, &
375	ONLY: surf_def_h
376
377	USE synthetic_turbulence_generator_mod, &
378	ONLY: stg_header
379
380	IMPLICIT NONE
381
382	CHARACTER (LEN=1) :: prec !<
383
384	CHARACTER (LEN=2) :: do2d_mode !<
385
386	CHARACTER (LEN=5) :: section_chr !<
387
388	CHARACTER (LEN=10) :: coor_chr !<
389	CHARACTER (LEN=10) :: host_chr !<
390
391	CHARACTER (LEN=16) :: begin_chr !<
392
393	CHARACTER (LEN=26) :: ver_rev !<
394
395	CHARACTER (LEN=32) :: cpl_name !<
396
397	CHARACTER (LEN=40) :: output_format !<
398
399	CHARACTER (LEN=70) :: char1 !<
400	CHARACTER (LEN=70) :: char2 !<
401	CHARACTER (LEN=70) :: dopr_chr !<
402	CHARACTER (LEN=70) :: do2d_xy !<
403	CHARACTER (LEN=70) :: do2d_xz !<
404	CHARACTER (LEN=70) :: do2d_yz !<
405	CHARACTER (LEN=70) :: do3d_chr !<
406	CHARACTER (LEN=70) :: domask_chr !<
407	CHARACTER (LEN=70) :: run_classification !<
408
409	CHARACTER (LEN=85) :: r_upper !<
410	CHARACTER (LEN=85) :: r_lower !<
411
412	CHARACTER (LEN=86) :: coordinates !<
413	CHARACTER (LEN=86) :: gradients !<
414	CHARACTER (LEN=86) :: slices !<
415	CHARACTER (LEN=86) :: temperatures !<
416	CHARACTER (LEN=86) :: ugcomponent !<
417	CHARACTER (LEN=86) :: vgcomponent !<
418
419	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !<
420
421	INTEGER(iwp) :: av !<
422	INTEGER(iwp) :: bh !<
423	INTEGER(iwp) :: blx !<
424	INTEGER(iwp) :: bly !<
425	INTEGER(iwp) :: bxl !<
426	INTEGER(iwp) :: bxr !<
427	INTEGER(iwp) :: byn !<
428	INTEGER(iwp) :: bys !<
429	INTEGER(iwp) :: ch !<
430	INTEGER(iwp) :: count !<
431	INTEGER(iwp) :: cpl_parent_id !<
432	INTEGER(iwp) :: cwx !<
433	INTEGER(iwp) :: cwy !<
434	INTEGER(iwp) :: cxl !<
435	INTEGER(iwp) :: cxr !<
436	INTEGER(iwp) :: cyn !<
437	INTEGER(iwp) :: cys !<
438	INTEGER(iwp) :: dim !<
439	INTEGER(iwp) :: i !<
440	INTEGER(iwp) :: io !<
441	INTEGER(iwp) :: j !<
442	INTEGER(iwp) :: k !<
443	INTEGER(iwp) :: l !<
444	INTEGER(iwp) :: ll !<
445	INTEGER(iwp) :: mpi_type !<
446	INTEGER(iwp) :: my_cpl_id !<
447	INTEGER(iwp) :: n !<
448	INTEGER(iwp) :: ncpl !<
449	INTEGER(iwp) :: npe_total !<
450
451
452	REAL(wp) :: cpuseconds_per_simulated_second !<
453	REAL(wp) :: lower_left_coord_x !< x-coordinate of nest domain
454	REAL(wp) :: lower_left_coord_y !< y-coordinate of nest domain
455
456	!
457	!-- Open the output file. At the end of the simulation, output is directed
458	!-- to unit 19.
459	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
460	.NOT. simulated_time_at_begin /= simulated_time ) THEN
461	io = 15 ! header output on file RUN_CONTROL
462	ELSE
463	io = 19 ! header output on file HEADER
464	ENDIF
465	CALL check_open( io )
466
467	!
468	!-- At the end of the run, output file (HEADER) will be rewritten with
469	!-- new information
470	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
471
472	!
473	!-- Determine kind of model run
474	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
475	run_classification = 'restart run'
476	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
477	run_classification = 'run with cyclic fill of 3D - prerun data'
478	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
479	run_classification = 'run without 1D - prerun'
480	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
481	run_classification = 'run with 1D - prerun'
482	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
483	run_classification = 'run initialized by user'
484	ELSE
485	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
486	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
487	ENDIF
488	IF ( nested_run ) run_classification = 'nested ' // run_classification
489	IF ( ocean ) THEN
490	run_classification = 'ocean - ' // run_classification
491	ELSE
492	run_classification = 'atmosphere - ' // run_classification
493	ENDIF
494
495	!
496	!-- Run-identification, date, time, host
497	host_chr = host(1:10)
498	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
499	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
500	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
501	#if defined( __mpi2 )
502	mpi_type = 2
503	#else
504	mpi_type = 1
505	#endif
506	WRITE ( io, 101 ) mpi_type, coupling_mode
507	ENDIF
508	#if defined( __parallel )
509	IF ( coupling_start_time /= 0.0_wp ) THEN
510	IF ( coupling_start_time > simulated_time_at_begin ) THEN
511	WRITE ( io, 109 )
512	ELSE
513	WRITE ( io, 114 )
514	ENDIF
515	ENDIF
516	#endif
517	IF ( ensemble_member_nr /= 0 ) THEN
518	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
519	ADJUSTR( host_chr ), ensemble_member_nr
520	ELSE
521	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
522	ADJUSTR( host_chr )
523	ENDIF
524	#if defined( __parallel )
525	IF ( npex == -1 .AND. npey == -1 ) THEN
526	char1 = 'calculated'
527	ELSE
528	char1 = 'predefined'
529	ENDIF
530	IF ( threads_per_task == 1 ) THEN
531	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
532	ELSE
533	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
534	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
535	ENDIF
536	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
537	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
538	npex == -1 .AND. pdims(2) == 1 ) &
539	THEN
540	WRITE ( io, 106 )
541	ELSEIF ( pdims(2) == 1 ) THEN
542	WRITE ( io, 107 ) 'x'
543	ELSEIF ( pdims(1) == 1 ) THEN
544	WRITE ( io, 107 ) 'y'
545	ENDIF
546	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
547	IF ( numprocs /= maximum_parallel_io_streams ) THEN
548	WRITE ( io, 108 ) maximum_parallel_io_streams
549	ENDIF
550	#endif
551
552	!
553	!-- Nesting informations
554	IF ( nested_run ) THEN
555
556	WRITE ( io, 600 ) TRIM( nesting_mode ), &
557	TRIM( nesting_datatransfer_mode )
558	CALL pmc_get_model_info( ncpl = ncpl, cpl_id = my_cpl_id )
559
560	DO n = 1, ncpl
561	CALL pmc_get_model_info( request_for_cpl_id = n, cpl_name = cpl_name,&
562	cpl_parent_id = cpl_parent_id, &
563	lower_left_x = lower_left_coord_x, &
564	lower_left_y = lower_left_coord_y, &
565	npe_total = npe_total )
566	IF ( n == my_cpl_id ) THEN
567	char1 = '*'
568	ELSE
569	char1 = ' '
570	ENDIF
571	WRITE ( io, 601 ) TRIM( char1 ), n, cpl_parent_id, npe_total, &
572	lower_left_coord_x, lower_left_coord_y, &
573	TRIM( cpl_name )
574	ENDDO
575	ENDIF
576	WRITE ( io, 99 )
577
578	!
579	!-- Numerical schemes
580	WRITE ( io, 110 )
581	WRITE ( io, 121 ) TRIM( approximation )
582	IF ( psolver(1:7) == 'poisfft' ) THEN
583	WRITE ( io, 111 ) TRIM( fft_method )
584	IF ( transpose_compute_overlap ) WRITE( io, 115 )
585	ELSEIF ( psolver == 'sor' ) THEN
586	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
587	ELSEIF ( psolver(1:9) == 'multigrid' ) THEN
588	WRITE ( io, 135 ) TRIM(psolver), cycle_mg, maximum_grid_level, ngsrb
589	IF ( mg_cycles == -1 ) THEN
590	WRITE ( io, 140 ) residual_limit
591	ELSE
592	WRITE ( io, 141 ) mg_cycles
593	ENDIF
594	IF ( mg_switch_to_pe0_level == 0 ) THEN
595	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
596	nzt_mg(1)
597	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
598	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
599	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
600	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
601	nzt_mg(mg_switch_to_pe0_level), &
602	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
603	nzt_mg(1)
604	ENDIF
605	IF ( psolver == 'multigrid_noopt' .AND. masking_method ) WRITE ( io, 144 )
606	ENDIF
607	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
608	THEN
609	WRITE ( io, 142 )
610	ENDIF
611
612	IF ( momentum_advec == 'pw-scheme' ) THEN
613	WRITE ( io, 113 )
614	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
615	WRITE ( io, 503 )
616	ENDIF
617	IF ( scalar_advec == 'pw-scheme' ) THEN
618	WRITE ( io, 116 )
619	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
620	WRITE ( io, 504 )
621	ELSE
622	WRITE ( io, 118 )
623	ENDIF
624
625	WRITE ( io, 139 ) TRIM( loop_optimization )
626
627	IF ( galilei_transformation ) THEN
628	IF ( use_ug_for_galilei_tr ) THEN
629	char1 = '0.6 * geostrophic wind'
630	ELSE
631	char1 = 'mean wind in model domain'
632	ENDIF
633	IF ( simulated_time_at_begin == simulated_time ) THEN
634	char2 = 'at the start of the run'
635	ELSE
636	char2 = 'at the end of the run'
637	ENDIF
638	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
639	advected_distance_x/1000.0_wp, &
640	advected_distance_y/1000.0_wp
641	ENDIF
642	WRITE ( io, 122 ) timestep_scheme
643	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
644	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
645	IF ( .NOT. ocean ) THEN
646	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
647	rayleigh_damping_factor
648	ELSE
649	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
650	rayleigh_damping_factor
651	ENDIF
652	ENDIF
653	IF ( neutral ) WRITE ( io, 131 ) pt_surface
654	IF ( humidity ) THEN
655	IF ( .NOT. cloud_physics ) THEN
656	WRITE ( io, 129 )
657	ELSE
658	WRITE ( io, 130 )
659	ENDIF
660	ENDIF
661	IF ( passive_scalar ) WRITE ( io, 134 )
662	IF ( conserve_volume_flow ) THEN
663	WRITE ( io, 150 ) conserve_volume_flow_mode
664	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
665	WRITE ( io, 151 ) u_bulk, v_bulk
666	ENDIF
667	ELSEIF ( dp_external ) THEN
668	IF ( dp_smooth ) THEN
669	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
670	ELSE
671	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
672	ENDIF
673	ENDIF
674	WRITE ( io, 99 )
675
676	!
677	!-- Runtime and timestep information
678	WRITE ( io, 200 )
679	IF ( .NOT. dt_fixed ) THEN
680	WRITE ( io, 201 ) dt_max, cfl_factor
681	ELSE
682	WRITE ( io, 202 ) dt
683	ENDIF
684	WRITE ( io, 203 ) simulated_time_at_begin, end_time
685
686	IF ( time_restart /= 9999999.9_wp .AND. &
687	simulated_time_at_begin == simulated_time ) THEN
688	IF ( dt_restart == 9999999.9_wp ) THEN
689	WRITE ( io, 204 ) ' Restart at: ',time_restart
690	ELSE
691	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
692	ENDIF
693	ENDIF
694
695	IF ( simulated_time_at_begin /= simulated_time ) THEN
696	i = MAX ( log_point_s(10)%counts, 1 )
697	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
698	cpuseconds_per_simulated_second = 0.0_wp
699	ELSE
700	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
701	( simulated_time - &
702	simulated_time_at_begin )
703	ENDIF
704	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
705	log_point_s(10)%sum / REAL( i, KIND=wp ), &
706	cpuseconds_per_simulated_second
707	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
708	IF ( dt_restart == 9999999.9_wp ) THEN
709	WRITE ( io, 204 ) ' Next restart at: ',time_restart
710	ELSE
711	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
712	ENDIF
713	ENDIF
714	ENDIF
715
716
717	!
718	!-- Start time for coupled runs, if independent precursor runs for atmosphere
719	!-- and ocean are used or have been used. In this case, coupling_start_time
720	!-- defines the time when the coupling is switched on.
721	IF ( coupling_start_time /= 0.0_wp ) THEN
722	WRITE ( io, 207 ) coupling_start_time
723	ENDIF
724
725	!
726	!-- Computational grid
727	IF ( .NOT. ocean ) THEN
728	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
729	IF ( dz_stretch_level_index < nzt+1 ) THEN
730	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
731	dz_stretch_factor, dz_max
732	ENDIF
733	ELSE
734	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
735	IF ( dz_stretch_level_index > 0 ) THEN
736	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
737	dz_stretch_factor, dz_max
738	ENDIF
739	ENDIF
740	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
741	MIN( nnz+2, nzt+2 )
742	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
743
744	!
745	!-- Large scale forcing and nudging
746	WRITE ( io, 160 )
747	IF ( large_scale_forcing ) THEN
748	WRITE ( io, 162 )
749	WRITE ( io, 163 )
750
751	IF ( large_scale_subsidence ) THEN
752	IF ( .NOT. use_subsidence_tendencies ) THEN
753	WRITE ( io, 164 )
754	ELSE
755	WRITE ( io, 165 )
756	ENDIF
757	ENDIF
758
759	IF ( bc_pt_b == 'dirichlet' ) THEN
760	WRITE ( io, 180 )
761	ELSEIF ( bc_pt_b == 'neumann' ) THEN
762	WRITE ( io, 181 )
763	ENDIF
764
765	IF ( bc_q_b == 'dirichlet' ) THEN
766	WRITE ( io, 182 )
767	ELSEIF ( bc_q_b == 'neumann' ) THEN
768	WRITE ( io, 183 )
769	ENDIF
770
771	WRITE ( io, 167 )
772	IF ( nudging ) THEN
773	WRITE ( io, 170 )
774	ENDIF
775	ELSE
776	WRITE ( io, 161 )
777	WRITE ( io, 171 )
778	ENDIF
779	IF ( large_scale_subsidence ) THEN
780	WRITE ( io, 168 )
781	WRITE ( io, 169 )
782	ENDIF
783
784	!
785	!-- Profile for the large scale vertial velocity
786	!-- Building output strings, starting with surface value
787	IF ( large_scale_subsidence ) THEN
788	temperatures = ' 0.0'
789	gradients = '------'
790	slices = ' 0'
791	coordinates = ' 0.0'
792	i = 1
793	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
794
795	WRITE (coor_chr,'(E10.2,7X)') &
796	w_subs(subs_vertical_gradient_level_i(i))
797	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
798
799	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
800	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
801
802	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
803	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
804
805	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
806	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
807
808	IF ( i == 10 ) THEN
809	EXIT
810	ELSE
811	i = i + 1
812	ENDIF
813
814	ENDDO
815
816
817	IF ( .NOT. large_scale_forcing ) THEN
818	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
819	TRIM( gradients ), TRIM( slices )
820	ENDIF
821
822
823	ENDIF
824
825	!-- Profile of the geostrophic wind (component ug)
826	!-- Building output strings
827	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
828	gradients = '------'
829	slices = ' 0'
830	coordinates = ' 0.0'
831	i = 1
832	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
833
834	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
835	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
836
837	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
838	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
839
840	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
841	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
842
843	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
844	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
845
846	IF ( i == 10 ) THEN
847	EXIT
848	ELSE
849	i = i + 1
850	ENDIF
851
852	ENDDO
853
854	IF ( .NOT. large_scale_forcing ) THEN
855	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
856	TRIM( gradients ), TRIM( slices )
857	ENDIF
858
859	!-- Profile of the geostrophic wind (component vg)
860	!-- Building output strings
861	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
862	gradients = '------'
863	slices = ' 0'
864	coordinates = ' 0.0'
865	i = 1
866	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
867
868	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
869	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
870
871	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
872	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
873
874	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
875	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
876
877	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
878	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
879
880	IF ( i == 10 ) THEN
881	EXIT
882	ELSE
883	i = i + 1
884	ENDIF
885
886	ENDDO
887
888	IF ( .NOT. large_scale_forcing ) THEN
889	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
890	TRIM( gradients ), TRIM( slices )
891	ENDIF
892
893	!
894	!-- Topography
895	WRITE ( io, 270 ) topography
896	SELECT CASE ( TRIM( topography ) )
897
898	CASE ( 'flat' )
899	! no actions necessary
900
901	CASE ( 'single_building' )
902	blx = INT( building_length_x / dx )
903	bly = INT( building_length_y / dy )
904	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
905	IF ( ABS( zw(bh ) - building_height ) == &
906	ABS( zw(bh+1) - building_height ) ) bh = bh + 1
907
908	IF ( building_wall_left == 9999999.9_wp ) THEN
909	building_wall_left = ( nx + 1 - blx ) / 2 * dx
910	ENDIF
911	bxl = INT ( building_wall_left / dx + 0.5_wp )
912	bxr = bxl + blx
913
914	IF ( building_wall_south == 9999999.9_wp ) THEN
915	building_wall_south = ( ny + 1 - bly ) / 2 * dy
916	ENDIF
917	bys = INT ( building_wall_south / dy + 0.5_wp )
918	byn = bys + bly
919
920	WRITE ( io, 271 ) building_length_x, building_length_y, &
921	building_height, bxl, bxr, bys, byn
922
923	CASE ( 'single_street_canyon' )
924	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
925	IF ( ABS( zw(ch ) - canyon_height ) == &
926	ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
927	IF ( canyon_width_x /= 9999999.9_wp ) THEN
928	!
929	!-- Street canyon in y direction
930	cwx = NINT( canyon_width_x / dx )
931	IF ( canyon_wall_left == 9999999.9_wp ) THEN
932	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
933	ENDIF
934	cxl = NINT( canyon_wall_left / dx )
935	cxr = cxl + cwx
936	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
937
938	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
939	!
940	!-- Street canyon in x direction
941	cwy = NINT( canyon_width_y / dy )
942	IF ( canyon_wall_south == 9999999.9_wp ) THEN
943	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
944	ENDIF
945	cys = NINT( canyon_wall_south / dy )
946	cyn = cys + cwy
947	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
948	ENDIF
949
950	CASE ( 'tunnel' )
951	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
952	!
953	!-- Tunnel axis in y direction
954	IF ( tunnel_length == 9999999.9_wp .OR. &
955	tunnel_length >= ( nx + 1 ) * dx ) THEN
956	WRITE ( io, 273 ) 'y', tunnel_height, tunnel_wall_depth, &
957	tunnel_width_x
958	ELSE
959	WRITE ( io, 274 ) 'y', tunnel_height, tunnel_wall_depth, &
960	tunnel_width_x, tunnel_length
961	ENDIF
962
963	ELSEIF ( tunnel_width_y /= 9999999.9_wp ) THEN
964	!
965	!-- Tunnel axis in x direction
966	IF ( tunnel_length == 9999999.9_wp .OR. &
967	tunnel_length >= ( ny + 1 ) * dy ) THEN
968	WRITE ( io, 273 ) 'x', tunnel_height, tunnel_wall_depth, &
969	tunnel_width_y
970	ELSE
971	WRITE ( io, 274 ) 'x', tunnel_height, tunnel_wall_depth, &
972	tunnel_width_y, tunnel_length
973	ENDIF
974	ENDIF
975
976	END SELECT
977
978	IF ( TRIM( topography ) /= 'flat' ) THEN
979	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
980	IF ( TRIM( topography ) == 'single_building' .OR. &
981	TRIM( topography ) == 'single_street_canyon' ) THEN
982	WRITE ( io, 278 )
983	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
984	WRITE ( io, 279 )
985	ENDIF
986	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
987	WRITE ( io, 278 )
988	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
989	WRITE ( io, 279 )
990	ENDIF
991	ENDIF
992
993	IF ( synthetic_turbulence_generator ) CALL stg_header ( io )
994
995	IF ( plant_canopy ) CALL pcm_header ( io )
996
997	IF ( land_surface ) CALL lsm_header ( io )
998
999	IF ( radiation ) CALL radiation_header ( io )
1000
1001	!
1002	!-- Boundary conditions
1003	IF ( ibc_p_b == 0 ) THEN
1004	r_lower = 'p(0) = 0 \|'
1005	ELSEIF ( ibc_p_b == 1 ) THEN
1006	r_lower = 'p(0) = p(1) \|'
1007	ENDIF
1008	IF ( ibc_p_t == 0 ) THEN
1009	r_upper = 'p(nzt+1) = 0 \|'
1010	ELSE
1011	r_upper = 'p(nzt+1) = p(nzt) \|'
1012	ENDIF
1013
1014	IF ( ibc_uv_b == 0 ) THEN
1015	r_lower = TRIM( r_lower ) // ' uv(0) = -uv(1) \|'
1016	ELSE
1017	r_lower = TRIM( r_lower ) // ' uv(0) = uv(1) \|'
1018	ENDIF
1019	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
1020	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = 0 \|'
1021	ELSEIF ( ibc_uv_t == 0 ) THEN
1022	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
1023	ELSE
1024	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = uv(nzt) \|'
1025	ENDIF
1026
1027	IF ( ibc_pt_b == 0 ) THEN
1028	IF ( land_surface ) THEN
1029	r_lower = TRIM( r_lower ) // ' pt(0) = from soil model'
1030	ELSE
1031	r_lower = TRIM( r_lower ) // ' pt(0) = pt_surface'
1032	ENDIF
1033	ELSEIF ( ibc_pt_b == 1 ) THEN
1034	r_lower = TRIM( r_lower ) // ' pt(0) = pt(1)'
1035	ELSEIF ( ibc_pt_b == 2 ) THEN
1036	r_lower = TRIM( r_lower ) // ' pt(0) = from coupled model'
1037	ENDIF
1038	IF ( ibc_pt_t == 0 ) THEN
1039	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt_top'
1040	ELSEIF( ibc_pt_t == 1 ) THEN
1041	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt)'
1042	ELSEIF( ibc_pt_t == 2 ) THEN
1043	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
1044
1045	ENDIF
1046
1047	WRITE ( io, 300 ) r_lower, r_upper
1048
1049	IF ( .NOT. constant_diffusion ) THEN
1050	IF ( ibc_e_b == 1 ) THEN
1051	r_lower = 'e(0) = e(1)'
1052	ELSE
1053	r_lower = 'e(0) = e(1) = (u/0.1)*2'
1054	ENDIF
1055	r_upper = 'e(nzt+1) = e(nzt) = e(nzt-1)'
1056
1057	WRITE ( io, 301 ) 'e', r_lower, r_upper
1058
1059	ENDIF
1060
1061	IF ( ocean ) THEN
1062	r_lower = 'sa(0) = sa(1)'
1063	IF ( ibc_sa_t == 0 ) THEN
1064	r_upper = 'sa(nzt+1) = sa_surface'
1065	ELSE
1066	r_upper = 'sa(nzt+1) = sa(nzt)'
1067	ENDIF
1068	WRITE ( io, 301 ) 'sa', r_lower, r_upper
1069	ENDIF
1070
1071	IF ( humidity ) THEN
1072	IF ( ibc_q_b == 0 ) THEN
1073	IF ( land_surface ) THEN
1074	r_lower = 'q(0) = from soil model'
1075	ELSE
1076	r_lower = 'q(0) = q_surface'
1077	ENDIF
1078
1079	ELSE
1080	r_lower = 'q(0) = q(1)'
1081	ENDIF
1082	IF ( ibc_q_t == 0 ) THEN
1083	r_upper = 'q(nzt+1) = q_top'
1084	ELSE
1085	r_upper = 'q(nzt+1) = q(nzt) + dq/dz'
1086	ENDIF
1087	WRITE ( io, 301 ) 'q', r_lower, r_upper
1088	ENDIF
1089
1090	IF ( passive_scalar ) THEN
1091	IF ( ibc_s_b == 0 ) THEN
1092	r_lower = 's(0) = s_surface'
1093	ELSE
1094	r_lower = 's(0) = s(1)'
1095	ENDIF
1096	IF ( ibc_s_t == 0 ) THEN
1097	r_upper = 's(nzt+1) = s_top'
1098	ELSEIF ( ibc_s_t == 1 ) THEN
1099	r_upper = 's(nzt+1) = s(nzt)'
1100	ELSEIF ( ibc_s_t == 2 ) THEN
1101	r_upper = 's(nzt+1) = s(nzt) + ds/dz'
1102	ENDIF
1103	WRITE ( io, 301 ) 's', r_lower, r_upper
1104	ENDIF
1105
1106	IF ( use_surface_fluxes ) THEN
1107	WRITE ( io, 303 )
1108	IF ( constant_heatflux ) THEN
1109	IF ( large_scale_forcing .AND. lsf_surf ) THEN
1110	IF ( surf_def_h(0)%ns >= 1 ) WRITE ( io, 306 ) surf_def_h(0)%shf(1)
1111	ELSE
1112	WRITE ( io, 306 ) surface_heatflux
1113	ENDIF
1114	IF ( random_heatflux ) WRITE ( io, 307 )
1115	ENDIF
1116	IF ( humidity .AND. constant_waterflux ) THEN
1117	IF ( large_scale_forcing .AND. lsf_surf ) THEN
1118	WRITE ( io, 311 ) surf_def_h(0)%qsws(1)
1119	ELSE
1120	WRITE ( io, 311 ) surface_waterflux
1121	ENDIF
1122	ENDIF
1123	IF ( passive_scalar .AND. constant_scalarflux ) THEN
1124	WRITE ( io, 313 ) surface_scalarflux
1125	ENDIF
1126	ENDIF
1127
1128	IF ( use_top_fluxes ) THEN
1129	WRITE ( io, 304 )
1130	IF ( coupling_mode == 'uncoupled' ) THEN
1131	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
1132	IF ( constant_top_heatflux ) THEN
1133	WRITE ( io, 306 ) top_heatflux
1134	ENDIF
1135	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1136	WRITE ( io, 316 )
1137	ENDIF
1138	IF ( ocean .AND. constant_top_salinityflux ) &
1139	WRITE ( io, 309 ) top_salinityflux
1140	IF ( humidity ) WRITE ( io, 315 )
1141	IF ( passive_scalar .AND. constant_top_scalarflux ) &
1142	WRITE ( io, 302 ) top_scalarflux
1143	ENDIF
1144
1145	IF ( constant_flux_layer ) THEN
1146	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
1147	z0h_factor*roughness_length, kappa, &
1148	zeta_min, zeta_max
1149	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
1150	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
1151	WRITE ( io, 312 )
1152	ENDIF
1153	IF ( passive_scalar .AND. .NOT. constant_scalarflux ) THEN
1154	WRITE ( io, 314 )
1155	ENDIF
1156	ELSE
1157	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
1158	WRITE ( io, 310 ) zeta_min, zeta_max
1159	ENDIF
1160	ENDIF
1161
1162	WRITE ( io, 317 ) bc_lr, bc_ns
1163	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1164	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
1165	IF ( turbulent_inflow ) THEN
1166	IF ( .NOT. recycling_yshift ) THEN
1167	WRITE ( io, 319 ) recycling_width, recycling_plane, &
1168	inflow_damping_height, inflow_damping_width
1169	ELSE
1170	WRITE ( io, 322 ) recycling_width, recycling_plane, &
1171	inflow_damping_height, inflow_damping_width
1172	END IF
1173	ENDIF
1174	IF ( turbulent_outflow ) THEN
1175	WRITE ( io, 323 ) outflow_source_plane, INT(outflow_source_plane/dx)
1176	ENDIF
1177	ENDIF
1178
1179	!
1180	!-- Initial Profiles
1181	WRITE ( io, 321 )
1182	!
1183	!-- Initial wind profiles
1184	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
1185
1186	!
1187	!-- Initial temperature profile
1188	!-- Building output strings, starting with surface temperature
1189	WRITE ( temperatures, '(F6.2)' ) pt_surface
1190	gradients = '------'
1191	slices = ' 0'
1192	coordinates = ' 0.0'
1193	i = 1
1194	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1195
1196	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1197	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1198
1199	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1200	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1201
1202	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1203	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1204
1205	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1206	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1207
1208	IF ( i == 10 ) THEN
1209	EXIT
1210	ELSE
1211	i = i + 1
1212	ENDIF
1213
1214	ENDDO
1215
1216	IF ( .NOT. nudging ) THEN
1217	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1218	TRIM( gradients ), TRIM( slices )
1219	ELSE
1220	WRITE ( io, 428 )
1221	ENDIF
1222
1223	!
1224	!-- Initial humidity profile
1225	!-- Building output strings, starting with surface humidity
1226	IF ( humidity ) THEN
1227	WRITE ( temperatures, '(E8.1)' ) q_surface
1228	gradients = '--------'
1229	slices = ' 0'
1230	coordinates = ' 0.0'
1231	i = 1
1232	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1233
1234	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1235	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1236
1237	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1238	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1239
1240	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1241	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1242
1243	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1244	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1245
1246	IF ( i == 10 ) THEN
1247	EXIT
1248	ELSE
1249	i = i + 1
1250	ENDIF
1251
1252	ENDDO
1253
1254	IF ( .NOT. nudging ) THEN
1255	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1256	TRIM( gradients ), TRIM( slices )
1257	ENDIF
1258	ENDIF
1259	!
1260	!-- Initial scalar profile
1261	!-- Building output strings, starting with surface humidity
1262	IF ( passive_scalar ) THEN
1263	WRITE ( temperatures, '(E8.1)' ) s_surface
1264	gradients = '--------'
1265	slices = ' 0'
1266	coordinates = ' 0.0'
1267	i = 1
1268	DO WHILE ( s_vertical_gradient_level_ind(i) /= -9999 )
1269
1270	WRITE (coor_chr,'(E8.1,4X)') s_init(s_vertical_gradient_level_ind(i))
1271	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1272
1273	WRITE (coor_chr,'(E8.1,4X)') s_vertical_gradient(i)
1274	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1275
1276	WRITE (coor_chr,'(I8,4X)') s_vertical_gradient_level_ind(i)
1277	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1278
1279	WRITE (coor_chr,'(F8.1,4X)') s_vertical_gradient_level(i)
1280	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1281
1282	IF ( i == 10 ) THEN
1283	EXIT
1284	ELSE
1285	i = i + 1
1286	ENDIF
1287
1288	ENDDO
1289
1290	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1291	TRIM( gradients ), TRIM( slices )
1292	ENDIF
1293
1294	!
1295	!-- Initial salinity profile
1296	!-- Building output strings, starting with surface salinity
1297	IF ( ocean ) THEN
1298	WRITE ( temperatures, '(F6.2)' ) sa_surface
1299	gradients = '------'
1300	slices = ' 0'
1301	coordinates = ' 0.0'
1302	i = 1
1303	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1304
1305	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1306	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1307
1308	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1309	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1310
1311	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1312	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1313
1314	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1315	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1316
1317	IF ( i == 10 ) THEN
1318	EXIT
1319	ELSE
1320	i = i + 1
1321	ENDIF
1322
1323	ENDDO
1324
1325	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1326	TRIM( gradients ), TRIM( slices )
1327	ENDIF
1328
1329
1330	!
1331	!-- Listing of 1D-profiles
1332	WRITE ( io, 325 ) dt_dopr_listing
1333	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1334	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1335	ENDIF
1336
1337	!
1338	!-- DATA output
1339	WRITE ( io, 330 )
1340	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1341	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1342	ENDIF
1343
1344	!
1345	!-- 1D-profiles
1346	dopr_chr = 'Profile:'
1347	IF ( dopr_n /= 0 ) THEN
1348	WRITE ( io, 331 )
1349
1350	output_format = ''
1351	output_format = netcdf_data_format_string
1352	IF ( netcdf_deflate == 0 ) THEN
1353	WRITE ( io, 344 ) output_format
1354	ELSE
1355	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1356	ENDIF
1357
1358	DO i = 1, dopr_n
1359	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
1360	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
1361	WRITE ( io, 332 ) dopr_chr
1362	dopr_chr = ' :'
1363	ENDIF
1364	ENDDO
1365
1366	IF ( dopr_chr /= '' ) THEN
1367	WRITE ( io, 332 ) dopr_chr
1368	ENDIF
1369	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
1370	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
1371	ENDIF
1372
1373	!
1374	!-- 2D-arrays
1375	DO av = 0, 1
1376
1377	i = 1
1378	do2d_xy = ''
1379	do2d_xz = ''
1380	do2d_yz = ''
1381	DO WHILE ( do2d(av,i) /= ' ' )
1382
1383	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
1384	do2d_mode = do2d(av,i)(l-1:l)
1385
1386	SELECT CASE ( do2d_mode )
1387	CASE ( 'xy' )
1388	ll = LEN_TRIM( do2d_xy )
1389	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1390	CASE ( 'xz' )
1391	ll = LEN_TRIM( do2d_xz )
1392	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1393	CASE ( 'yz' )
1394	ll = LEN_TRIM( do2d_yz )
1395	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1396	END SELECT
1397
1398	i = i + 1
1399
1400	ENDDO
1401
1402	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
1403	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
1404	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
1405
1406	IF ( av == 0 ) THEN
1407	WRITE ( io, 334 ) ''
1408	ELSE
1409	WRITE ( io, 334 ) '(time-averaged)'
1410	ENDIF
1411
1412	IF ( do2d_at_begin ) THEN
1413	begin_chr = 'and at the start'
1414	ELSE
1415	begin_chr = ''
1416	ENDIF
1417
1418	output_format = ''
1419	output_format = netcdf_data_format_string
1420	IF ( netcdf_deflate == 0 ) THEN
1421	WRITE ( io, 344 ) output_format
1422	ELSE
1423	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1424	ENDIF
1425
1426	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
1427	i = 1
1428	slices = '/'
1429	coordinates = '/'
1430	!
1431	!-- Building strings with index and coordinate information of the
1432	!-- slices
1433	DO WHILE ( section(i,1) /= -9999 )
1434
1435	WRITE (section_chr,'(I5)') section(i,1)
1436	section_chr = ADJUSTL( section_chr )
1437	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1438
1439	IF ( section(i,1) == -1 ) THEN
1440	WRITE (coor_chr,'(F10.1)') -1.0_wp
1441	ELSE
1442	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
1443	ENDIF
1444	coor_chr = ADJUSTL( coor_chr )
1445	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1446
1447	i = i + 1
1448	ENDDO
1449	IF ( av == 0 ) THEN
1450	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
1451	TRIM( begin_chr ), 'k', TRIM( slices ), &
1452	TRIM( coordinates )
1453	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
1454	WRITE ( io, 339 ) skip_time_do2d_xy
1455	ENDIF
1456	ELSE
1457	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
1458	TRIM( begin_chr ), averaging_interval, &
1459	dt_averaging_input, 'k', TRIM( slices ), &
1460	TRIM( coordinates )
1461	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1462	WRITE ( io, 339 ) skip_time_data_output_av
1463	ENDIF
1464	ENDIF
1465	IF ( netcdf_data_format > 4 ) THEN
1466	WRITE ( io, 352 ) ntdim_2d_xy(av)
1467	ELSE
1468	WRITE ( io, 353 )
1469	ENDIF
1470	ENDIF
1471
1472	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
1473	i = 1
1474	slices = '/'
1475	coordinates = '/'
1476	!
1477	!-- Building strings with index and coordinate information of the
1478	!-- slices
1479	DO WHILE ( section(i,2) /= -9999 )
1480
1481	WRITE (section_chr,'(I5)') section(i,2)
1482	section_chr = ADJUSTL( section_chr )
1483	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1484
1485	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
1486	coor_chr = ADJUSTL( coor_chr )
1487	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1488
1489	i = i + 1
1490	ENDDO
1491	IF ( av == 0 ) THEN
1492	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
1493	TRIM( begin_chr ), 'j', TRIM( slices ), &
1494	TRIM( coordinates )
1495	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
1496	WRITE ( io, 339 ) skip_time_do2d_xz
1497	ENDIF
1498	ELSE
1499	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
1500	TRIM( begin_chr ), averaging_interval, &
1501	dt_averaging_input, 'j', TRIM( slices ), &
1502	TRIM( coordinates )
1503	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1504	WRITE ( io, 339 ) skip_time_data_output_av
1505	ENDIF
1506	ENDIF
1507	IF ( netcdf_data_format > 4 ) THEN
1508	WRITE ( io, 352 ) ntdim_2d_xz(av)
1509	ELSE
1510	WRITE ( io, 353 )
1511	ENDIF
1512	ENDIF
1513
1514	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
1515	i = 1
1516	slices = '/'
1517	coordinates = '/'
1518	!
1519	!-- Building strings with index and coordinate information of the
1520	!-- slices
1521	DO WHILE ( section(i,3) /= -9999 )
1522
1523	WRITE (section_chr,'(I5)') section(i,3)
1524	section_chr = ADJUSTL( section_chr )
1525	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1526
1527	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
1528	coor_chr = ADJUSTL( coor_chr )
1529	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1530
1531	i = i + 1
1532	ENDDO
1533	IF ( av == 0 ) THEN
1534	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
1535	TRIM( begin_chr ), 'i', TRIM( slices ), &
1536	TRIM( coordinates )
1537	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
1538	WRITE ( io, 339 ) skip_time_do2d_yz
1539	ENDIF
1540	ELSE
1541	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
1542	TRIM( begin_chr ), averaging_interval, &
1543	dt_averaging_input, 'i', TRIM( slices ), &
1544	TRIM( coordinates )
1545	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1546	WRITE ( io, 339 ) skip_time_data_output_av
1547	ENDIF
1548	ENDIF
1549	IF ( netcdf_data_format > 4 ) THEN
1550	WRITE ( io, 352 ) ntdim_2d_yz(av)
1551	ELSE
1552	WRITE ( io, 353 )
1553	ENDIF
1554	ENDIF
1555
1556	ENDIF
1557
1558	ENDDO
1559
1560	!
1561	!-- 3d-arrays
1562	DO av = 0, 1
1563
1564	i = 1
1565	do3d_chr = ''
1566	DO WHILE ( do3d(av,i) /= ' ' )
1567
1568	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
1569	i = i + 1
1570
1571	ENDDO
1572
1573	IF ( do3d_chr /= '' ) THEN
1574	IF ( av == 0 ) THEN
1575	WRITE ( io, 336 ) ''
1576	ELSE
1577	WRITE ( io, 336 ) '(time-averaged)'
1578	ENDIF
1579
1580	output_format = netcdf_data_format_string
1581	IF ( netcdf_deflate == 0 ) THEN
1582	WRITE ( io, 344 ) output_format
1583	ELSE
1584	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1585	ENDIF
1586
1587	IF ( do3d_at_begin ) THEN
1588	begin_chr = 'and at the start'
1589	ELSE
1590	begin_chr = ''
1591	ENDIF
1592	IF ( av == 0 ) THEN
1593	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1594	zu(nz_do3d), nz_do3d
1595	ELSE
1596	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1597	TRIM( begin_chr ), averaging_interval, &
1598	dt_averaging_input, zu(nz_do3d), nz_do3d
1599	ENDIF
1600
1601	IF ( netcdf_data_format > 4 ) THEN
1602	WRITE ( io, 352 ) ntdim_3d(av)
1603	ELSE
1604	WRITE ( io, 353 )
1605	ENDIF
1606
1607	IF ( av == 0 ) THEN
1608	IF ( skip_time_do3d /= 0.0_wp ) THEN
1609	WRITE ( io, 339 ) skip_time_do3d
1610	ENDIF
1611	ELSE
1612	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1613	WRITE ( io, 339 ) skip_time_data_output_av
1614	ENDIF
1615	ENDIF
1616
1617	ENDIF
1618
1619	ENDDO
1620
1621	!
1622	!-- masked arrays
1623	IF ( masks > 0 ) WRITE ( io, 345 ) &
1624	mask_scale_x, mask_scale_y, mask_scale_z
1625	DO mid = 1, masks
1626	DO av = 0, 1
1627
1628	i = 1
1629	domask_chr = ''
1630	DO WHILE ( domask(mid,av,i) /= ' ' )
1631	domask_chr = TRIM( domask_chr ) // ' ' // &
1632	TRIM( domask(mid,av,i) ) // ','
1633	i = i + 1
1634	ENDDO
1635
1636	IF ( domask_chr /= '' ) THEN
1637	IF ( av == 0 ) THEN
1638	WRITE ( io, 346 ) '', mid
1639	ELSE
1640	WRITE ( io, 346 ) ' (time-averaged)', mid
1641	ENDIF
1642
1643	output_format = netcdf_data_format_string
1644	!-- Parallel output not implemented for mask data, hence
1645	!-- output_format must be adjusted.
1646	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
1647	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
1648	IF ( netcdf_deflate == 0 ) THEN
1649	WRITE ( io, 344 ) output_format
1650	ELSE
1651	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1652	ENDIF
1653
1654	IF ( av == 0 ) THEN
1655	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1656	ELSE
1657	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1658	averaging_interval, dt_averaging_input
1659	ENDIF
1660
1661	IF ( av == 0 ) THEN
1662	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
1663	WRITE ( io, 339 ) skip_time_domask(mid)
1664	ENDIF
1665	ELSE
1666	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1667	WRITE ( io, 339 ) skip_time_data_output_av
1668	ENDIF
1669	ENDIF
1670	!
1671	!-- output locations
1672	DO dim = 1, 3
1673	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
1674	count = 0
1675	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
1676	count = count + 1
1677	ENDDO
1678	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1679	mask(mid,dim,:count)
1680	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
1681	mask_loop(mid,dim,2) < 0.0_wp .AND. &
1682	mask_loop(mid,dim,3) == 0.0_wp ) THEN
1683	WRITE ( io, 350 ) dir(dim), dir(dim)
1684	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
1685	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1686	mask_loop(mid,dim,1:2)
1687	ELSE
1688	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1689	mask_loop(mid,dim,1:3)
1690	ENDIF
1691	ENDDO
1692	ENDIF
1693
1694	ENDDO
1695	ENDDO
1696
1697	!
1698	!-- Timeseries
1699	IF ( dt_dots /= 9999999.9_wp ) THEN
1700	WRITE ( io, 340 )
1701
1702	output_format = netcdf_data_format_string
1703	IF ( netcdf_deflate == 0 ) THEN
1704	WRITE ( io, 344 ) output_format
1705	ELSE
1706	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1707	ENDIF
1708	WRITE ( io, 341 ) dt_dots
1709	ENDIF
1710
1711	#if defined( __dvrp_graphics )
1712	!
1713	!-- Dvrp-output
1714	IF ( dt_dvrp /= 9999999.9_wp ) THEN
1715	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1716	TRIM( dvrp_username ), TRIM( dvrp_directory )
1717	i = 1
1718	l = 0
1719	m = 0
1720	DO WHILE ( mode_dvrp(i) /= ' ' )
1721	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1722	READ ( mode_dvrp(i), '(10X,I2)' ) j
1723	l = l + 1
1724	IF ( do3d(0,j) /= ' ' ) THEN
1725	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1726	isosurface_color(:,l)
1727	ENDIF
1728	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1729	READ ( mode_dvrp(i), '(6X,I2)' ) j
1730	m = m + 1
1731	IF ( do2d(0,j) /= ' ' ) THEN
1732	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1733	slicer_range_limits_dvrp(:,m)
1734	ENDIF
1735	ENDIF
1736	i = i + 1
1737	ENDDO
1738
1739	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1740	superelevation_y, superelevation, clip_dvrp_l, &
1741	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1742
1743	IF ( TRIM( topography ) /= 'flat' ) THEN
1744	WRITE ( io, 366 ) topography_color
1745	IF ( cluster_size > 1 ) THEN
1746	WRITE ( io, 367 ) cluster_size
1747	ENDIF
1748	ENDIF
1749
1750	ENDIF
1751	#endif
1752	!
1753	!-- Output of virtual flight information
1754	IF ( virtual_flight ) CALL flight_header( io )
1755
1756	!
1757	!-- Output of spectra related quantities
1758	IF ( calculate_spectra ) CALL spectra_header( io )
1759
1760	WRITE ( io, 99 )
1761
1762	!
1763	!-- Physical quantities
1764	WRITE ( io, 400 )
1765
1766	!
1767	!-- Geostrophic parameters
1768	WRITE ( io, 410 ) phi, omega, f, fs
1769
1770	!
1771	!-- Other quantities
1772	WRITE ( io, 411 ) g
1773
1774	WRITE ( io, 412 ) TRIM( reference_state )
1775	IF ( use_single_reference_value ) THEN
1776	IF ( ocean ) THEN
1777	WRITE ( io, 413 ) prho_reference
1778	ELSE
1779	WRITE ( io, 414 ) pt_reference
1780	ENDIF
1781	ENDIF
1782
1783	!
1784	!-- Cloud physics parameters
1785	IF ( cloud_physics ) THEN
1786	WRITE ( io, 415 )
1787	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1788	IF ( microphysics_seifert ) THEN
1789	WRITE ( io, 510 ) 1.0E-6_wp * nc_const
1790	WRITE ( io, 511 ) c_sedimentation
1791	ENDIF
1792	ENDIF
1793
1794	!
1795	!-- Cloud physcis parameters / quantities / numerical methods
1796	WRITE ( io, 430 )
1797	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1798	WRITE ( io, 431 )
1799	ELSEIF ( humidity .AND. cloud_physics ) THEN
1800	WRITE ( io, 432 )
1801	IF ( cloud_top_radiation ) WRITE ( io, 132 )
1802	IF ( microphysics_kessler ) THEN
1803	WRITE ( io, 133 )
1804	ELSEIF ( microphysics_seifert ) THEN
1805	IF ( cloud_water_sedimentation ) WRITE ( io, 506 )
1806	WRITE ( io, 505 )
1807	IF ( collision_turbulence ) WRITE ( io, 507 )
1808	IF ( ventilation_effect ) WRITE ( io, 508 )
1809	IF ( limiter_sedimentation ) WRITE ( io, 509 )
1810	ENDIF
1811	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1812	WRITE ( io, 433 )
1813	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1814	IF ( collision_kernel /= 'none' ) THEN
1815	WRITE ( io, 435 ) TRIM( collision_kernel )
1816	IF ( collision_kernel(6:9) == 'fast' ) THEN
1817	WRITE ( io, 436 ) radius_classes, dissipation_classes
1818	ENDIF
1819	ELSE
1820	WRITE ( io, 437 )
1821	ENDIF
1822	ENDIF
1823
1824	!
1825	!-- LES / turbulence parameters
1826	WRITE ( io, 450 )
1827
1828	!--
1829	! ... LES-constants used must still be added here
1830	!--
1831	IF ( constant_diffusion ) THEN
1832	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1833	prandtl_number
1834	ENDIF
1835	IF ( .NOT. constant_diffusion) THEN
1836	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
1837	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
1838	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1839	ENDIF
1840
1841	!
1842	!-- Special actions during the run
1843	WRITE ( io, 470 )
1844	IF ( create_disturbances ) THEN
1845	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1846	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1847	zu(disturbance_level_ind_t), disturbance_level_ind_t
1848	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1849	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1850	ELSE
1851	WRITE ( io, 473 ) disturbance_energy_limit
1852	ENDIF
1853	WRITE ( io, 474 ) TRIM( random_generator )
1854	ENDIF
1855	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
1856	WRITE ( io, 475 ) pt_surface_initial_change
1857	ENDIF
1858	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
1859	WRITE ( io, 476 ) q_surface_initial_change
1860	ENDIF
1861	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
1862	WRITE ( io, 477 ) q_surface_initial_change
1863	ENDIF
1864
1865	IF ( particle_advection ) THEN
1866	!
1867	!-- Particle attributes
1868	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1869	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1870	end_time_prel
1871	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1872	IF ( random_start_position ) WRITE ( io, 481 )
1873	IF ( seed_follows_topography ) WRITE ( io, 496 )
1874	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1875	WRITE ( io, 495 ) total_number_of_particles
1876	IF ( dt_write_particle_data /= 9999999.9_wp ) THEN
1877	WRITE ( io, 485 ) dt_write_particle_data
1878	IF ( netcdf_data_format > 1 ) THEN
1879	output_format = 'netcdf (64 bit offset) and binary'
1880	ELSE
1881	output_format = 'netcdf and binary'
1882	ENDIF
1883	IF ( netcdf_deflate == 0 ) THEN
1884	WRITE ( io, 344 ) output_format
1885	ELSE
1886	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
1887	ENDIF
1888	ENDIF
1889	IF ( dt_dopts /= 9999999.9_wp ) WRITE ( io, 494 ) dt_dopts
1890	IF ( write_particle_statistics ) WRITE ( io, 486 )
1891
1892	WRITE ( io, 487 ) number_of_particle_groups
1893
1894	DO i = 1, number_of_particle_groups
1895	IF ( i == 1 .AND. density_ratio(i) == 9999999.9_wp ) THEN
1896	WRITE ( io, 490 ) i, 0.0_wp
1897	WRITE ( io, 492 )
1898	ELSE
1899	WRITE ( io, 490 ) i, radius(i)
1900	IF ( density_ratio(i) /= 0.0_wp ) THEN
1901	WRITE ( io, 491 ) density_ratio(i)
1902	ELSE
1903	WRITE ( io, 492 )
1904	ENDIF
1905	ENDIF
1906	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1907	pdx(i), pdy(i), pdz(i)
1908	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1909	ENDDO
1910
1911	ENDIF
1912
1913
1914	!
1915	!-- Parameters of 1D-model
1916	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1917	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1918	mixing_length_1d, dissipation_1d
1919	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1920	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1921	ENDIF
1922	ENDIF
1923
1924	!
1925	!-- User-defined information
1926	CALL user_header( io )
1927
1928	WRITE ( io, 99 )
1929
1930	!
1931	!-- Write buffer contents to disc immediately
1932	FLUSH( io )
1933
1934	!
1935	!-- Here the FORMATs start
1936
1937	99 FORMAT (1X,78('-'))
1938	100 FORMAT (/1X,'******************************',4X,44('-')/ &
1939	1X,'* ',A,' *',4X,A/ &
1940	1X,'******************************',4X,44('-'))
1941	101 FORMAT (35X,'coupled run using MPI-',I1,': ',A/ &
1942	35X,42('-'))
1943	102 FORMAT (/' Date: ',A8,4X,'Run: ',A20/ &
1944	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
1945	' Run on host: ',A10)
1946	#if defined( __parallel )
1947	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
1948	')',1X,A)
1949	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
1950	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
1951	105 FORMAT (35X,'One additional PE is used to handle'/37X,'the dvrp output!')
1952	106 FORMAT (35X,'A 1d-decomposition along x is forced'/ &
1953	35X,'because the job is running on an SMP-cluster')
1954	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
1955	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
1956	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
1957	35X,42('-'))
1958	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
1959	35X,'independent precursor runs'/ &
1960	35X,42('-'))
1961	#endif
1962	110 FORMAT (/' Numerical Schemes:'/ &
1963	' -----------------'/)
1964	121 FORMAT (' --> Use the ',A,' approximation for the model equations.')
1965	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1966	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1967	' Iterations (initial/other): ',I3,'/',I3,' omega =',F6.3)
1968	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1969	' or Upstream')
1970	115 FORMAT (' FFT and transpositions are overlapping')
1971	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1972	' or Upstream')
1973	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1974	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1975	' translation velocity = ',A/ &
1976	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1977	122 FORMAT (' --> Time differencing scheme: ',A)
1978	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1979	' maximum damping coefficient:',F6.3, ' 1/s')
1980	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1981	130 FORMAT (' --> Additional prognostic equation for the total water content')
1982	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1983	F6.2, ' K assumed')
1984	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1985	' effective emissivity scheme')
1986	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1987	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1988	135 FORMAT (' --> Solve perturbation pressure via ',A,' method (', &
1989	A,'-cycle)'/ &
1990	' number of grid levels: ',I2/ &
1991	' Gauss-Seidel red/black iterations: ',I2)
1992	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1993	I3,')')
1994	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1995	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1996	I3,')'/ &
1997	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1998	I3,')')
1999	139 FORMAT (' --> Loop optimization method: ',A)
2000	140 FORMAT (' maximum residual allowed: ',E10.3)
2001	141 FORMAT (' fixed number of multigrid cycles: ',I4)
2002	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
2003	'step')
2004	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
2005	'kinetic energy')
2006	144 FORMAT (' masking method is used')
2007	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
2008	'conserved'/ &
2009	' using the ',A,' mode')
2010	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
2011	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
2012	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
2013	/' starting from dp_level_b =', F8.3, 'm', A /)
2014	160 FORMAT (//' Large scale forcing and nudging:'/ &
2015	' -------------------------------'/)
2016	161 FORMAT (' --> No large scale forcing from external is used (default) ')
2017	162 FORMAT (' --> Large scale forcing from external file LSF_DATA is used: ')
2018	163 FORMAT (' - large scale advection tendencies ')
2019	164 FORMAT (' - large scale subsidence velocity w_subs ')
2020	165 FORMAT (' - large scale subsidence tendencies ')
2021	167 FORMAT (' - and geostrophic wind components ug and vg')
2022	168 FORMAT (' --> Large-scale vertical motion is used in the ', &
2023	'prognostic equation(s) for')
2024	169 FORMAT (' the scalar(s) only')
2025	170 FORMAT (' --> Nudging is used')
2026	171 FORMAT (' --> No nudging is used (default) ')
2027	180 FORMAT (' - prescribed surface values for temperature')
2028	181 FORMAT (' - prescribed surface fluxes for temperature')
2029	182 FORMAT (' - prescribed surface values for humidity')
2030	183 FORMAT (' - prescribed surface fluxes for humidity')
2031	200 FORMAT (//' Run time and time step information:'/ &
2032	' ----------------------------------'/)
2033	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
2034	' CFL-factor:',F5.2)
2035	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
2036	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
2037	' End time: ',F9.3,' s')
2038	204 FORMAT ( A,F9.3,' s')
2039	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
2040	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
2041	' CPU-time used: ',F9.3,' s per timestep: ', &
2042	' ',F9.3,' s'/ &
2043	' per second of simulated tim', &
2044	'e: ',F9.3,' s')
2045	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
2046	250 FORMAT (//' Computational grid and domain size:'/ &
2047	' ----------------------------------'// &
2048	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
2049	' m dz = ',F7.3,' m'/ &
2050	' Domain size: x = ',F10.3,' m y = ',F10.3, &
2051	' m z(u) = ',F10.3,' m'/)
2052	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
2053	' factor:',F6.3/ &
2054	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
2055	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
2056	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
2057	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
2058	' degrees')
2059	270 FORMAT (//' Topography information:'/ &
2060	' ----------------------'// &
2061	1X,'Topography: ',A)
2062	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
2063	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
2064	' / ',I4)
2065	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
2066	' direction' / &
2067	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
2068	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
2069	273 FORMAT ( ' Tunnel of infinite length in ',A, &
2070	' direction' / &
2071	' Tunnel height: ', F6.2, / &
2072	' Tunnel-wall depth: ', F6.2 / &
2073	' Tunnel width: ', F6.2 )
2074	274 FORMAT ( ' Tunnel in ', A, ' direction.' / &
2075	' Tunnel height: ', F6.2, / &
2076	' Tunnel-wall depth: ', F6.2 / &
2077	' Tunnel width: ', F6.2, / &
2078	' Tunnel length: ', F6.2 )
2079	278 FORMAT (' Topography grid definition convention:'/ &
2080	' cell edge (staggered grid points'/ &
2081	' (u in x-direction, v in y-direction))' /)
2082	279 FORMAT (' Topography grid definition convention:'/ &
2083	' cell center (scalar grid points)' /)
2084	300 FORMAT (//' Boundary conditions:'/ &
2085	' -------------------'// &
2086	' p uv ', &
2087	' pt'// &
2088	' B. bound.: ',A/ &
2089	' T. bound.: ',A)
2090	301 FORMAT (/' ',A// &
2091	' B. bound.: ',A/ &
2092	' T. bound.: ',A)
2093	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
2094	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
2095	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
2096	'computational u,v-level:'// &
2097	' zp = ',F6.2,' m z0 =',F7.4,' m z0h =',F8.5,&
2098	' m kappa =',F5.2/ &
2099	' Rif value range: ',F8.2,' <= rif <=',F6.2)
2100	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
2101	307 FORMAT (' Heatflux has a random normal distribution')
2102	308 FORMAT (' Predefined surface temperature')
2103	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
2104	310 FORMAT (//' 1D-Model:'// &
2105	' Rif value range: ',F6.2,' <= rif <=',F6.2)
2106	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' kg/kg m/s')
2107	312 FORMAT (' Predefined surface humidity')
2108	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
2109	314 FORMAT (' Predefined scalar value at the surface')
2110	302 FORMAT (' Predefined constant scalarflux: ',F9.6,' kg/(m**2 s)')
2111	315 FORMAT (' Humidity flux at top surface is 0.0')
2112	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
2113	'atmosphere model')
2114	317 FORMAT (//' Lateral boundaries:'/ &
2115	' left/right: ',A/ &
2116	' north/south: ',A)
2117	318 FORMAT (/' use_cmax: ',L1 / &
2118	' pt damping layer width = ',F8.2,' m, pt ', &
2119	'damping factor =',F7.4)
2120	319 FORMAT (' turbulence recycling at inflow switched on'/ &
2121	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
2122	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
2123	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
2124	' v: ',F9.6,' m2/s2')
2125	321 FORMAT (//' Initial profiles:'/ &
2126	' ----------------')
2127	322 FORMAT (' turbulence recycling at inflow switched on'/ &
2128	' y shift of the recycled inflow turbulence switched on'/ &
2129	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
2130	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/)
2131	323 FORMAT (' turbulent outflow conditon switched on'/ &
2132	' position of outflow source plane: ',F7.1,' m ', &
2133	'grid index: ', I4)
2134	325 FORMAT (//' List output:'/ &
2135	' -----------'// &
2136	' 1D-Profiles:'/ &
2137	' Output every ',F8.2,' s')
2138	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
2139	' Averaging input every ',F8.2,' s')
2140	330 FORMAT (//' Data output:'/ &
2141	' -----------'/)
2142	331 FORMAT (/' 1D-Profiles:')
2143	332 FORMAT (/' ',A)
2144	333 FORMAT (' Output every ',F8.2,' s',/ &
2145	' Time averaged over ',F8.2,' s'/ &
2146	' Averaging input every ',F8.2,' s')
2147	334 FORMAT (/' 2D-Arrays',A,':')
2148	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
2149	' Output every ',F8.2,' s ',A/ &
2150	' Cross sections at ',A1,' = ',A/ &
2151	' scalar-coordinates: ',A,' m'/)
2152	336 FORMAT (/' 3D-Arrays',A,':')
2153	337 FORMAT (/' Arrays: ',A/ &
2154	' Output every ',F8.2,' s ',A/ &
2155	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
2156	339 FORMAT (' No output during initial ',F8.2,' s')
2157	340 FORMAT (/' Time series:')
2158	341 FORMAT (' Output every ',F8.2,' s'/)
2159	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
2160	' Output every ',F8.2,' s ',A/ &
2161	' Time averaged over ',F8.2,' s'/ &
2162	' Averaging input every ',F8.2,' s'/ &
2163	' Cross sections at ',A1,' = ',A/ &
2164	' scalar-coordinates: ',A,' m'/)
2165	343 FORMAT (/' Arrays: ',A/ &
2166	' Output every ',F8.2,' s ',A/ &
2167	' Time averaged over ',F8.2,' s'/ &
2168	' Averaging input every ',F8.2,' s'/ &
2169	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
2170	344 FORMAT (' Output format: ',A/)
2171	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
2172	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
2173	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
2174	' mask_scale_z (in z-direction): ',F9.3, ' m' )
2175	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
2176	347 FORMAT (' Variables: ',A/ &
2177	' Output every ',F8.2,' s')
2178	348 FORMAT (' Variables: ',A/ &
2179	' Output every ',F8.2,' s'/ &
2180	' Time averaged over ',F8.2,' s'/ &
2181	' Averaging input every ',F8.2,' s')
2182	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
2183	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
2184	13(' ',8(F8.2,',')/) )
2185	350 FORMAT (/' Output locations in ',A,'-direction: ', &
2186	'all gridpoints along ',A,'-direction (default).' )
2187	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
2188	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
2189	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
2190	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
2191	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
2192	354 FORMAT (' Output format: ',A, ' compressed with level: ',I1/)
2193	#if defined( __dvrp_graphics )
2194	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
2195	' Output every ',F7.1,' s'/ &
2196	' Output mode: ',A/ &
2197	' Host / User: ',A,' / ',A/ &
2198	' Directory: ',A// &
2199	' The sequence contains:')
2200	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
2201	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
2202	362 FORMAT (/' Slicer plane ',A/ &
2203	' Slicer limits: [',F6.2,',',F6.2,']')
2204	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
2205	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
2206	')'/ &
2207	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
2208	' from y = ',F9.1,' m to y = ',F9.1,' m')
2209	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
2210	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
2211	#endif
2212	400 FORMAT (//' Physical quantities:'/ &
2213	' -------------------'/)
2214	410 FORMAT (' Geograph. latitude : phi = ',F4.1,' degr'/ &
2215	' Angular velocity : omega =',E10.3,' rad/s'/ &
2216	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
2217	' f* = ',F9.6,' 1/s')
2218	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
2219	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
2220	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
2221	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
2222	415 FORMAT (/' Cloud physics parameters:'/ &
2223	' ------------------------'/)
2224	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
2225	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
2226	' Density of air : rho_0 =',F6.3,' kg/m**3'/ &
2227	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
2228	' Vapourization heat : L_v =',E9.2,' J/kg')
2229	417 FORMAT (' Geograph. longitude : lambda = ',F4.1,' degr')
2230	418 FORMAT (/' Day of the year at model start : day_init = ',I3 &
2231	/' UTC time at model start : time_utc_init = ',F7.1' s')
2232	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
2233	' Height: ',A,' m'/ &
2234	' Temperature: ',A,' K'/ &
2235	' Gradient: ',A,' K/100m'/ &
2236	' Gridpoint: ',A)
2237	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
2238	' Height: ',A,' m'/ &
2239	' Humidity: ',A,' kg/kg'/ &
2240	' Gradient: ',A,' (kg/kg)/100m'/ &
2241	' Gridpoint: ',A)
2242	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
2243	' Height: ',A,' m'/ &
2244	' Scalar concentration: ',A,' kg/m**3'/ &
2245	' Gradient: ',A,' (kg/m**3)/100m'/ &
2246	' Gridpoint: ',A)
2247	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
2248	' Height: ',A,' m'/ &
2249	' ug: ',A,' m/s'/ &
2250	' Gradient: ',A,' 1/100s'/ &
2251	' Gridpoint: ',A)
2252	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
2253	' Height: ',A,' m'/ &
2254	' vg: ',A,' m/s'/ &
2255	' Gradient: ',A,' 1/100s'/ &
2256	' Gridpoint: ',A)
2257	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
2258	' Height: ',A,' m'/ &
2259	' Salinity: ',A,' psu'/ &
2260	' Gradient: ',A,' psu/100m'/ &
2261	' Gridpoint: ',A)
2262	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
2263	' Height: ',A,' m'/ &
2264	' w_subs: ',A,' m/s'/ &
2265	' Gradient: ',A,' (m/s)/100m'/ &
2266	' Gridpoint: ',A)
2267	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
2268	' profiles')
2269	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
2270	' NUDGING_DATA')
2271	430 FORMAT (//' Cloud physics quantities / methods:'/ &
2272	' ----------------------------------'/)
2273	431 FORMAT (' Humidity is considered, bu no condensation')
2274	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
2275	' total water content is used.'/ &
2276	' Condensation is parameterized via 0% - or 100% scheme.')
2277	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
2278	'icle model')
2279	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
2280	' droplets < 1.0E-6 m')
2281	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
2282	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
2283	'are used'/ &
2284	' number of radius classes: ',I3,' interval ', &
2285	'[1.0E-6,2.0E-4] m'/ &
2286	' number of dissipation classes: ',I2,' interval ', &
2287	'[0,1000] cm2/s3')
2288	437 FORMAT (' Droplet collision is switched off')
2289	450 FORMAT (//' LES / Turbulence quantities:'/ &
2290	' ---------------------------'/)
2291	451 FORMAT (' Diffusion coefficients are constant:'/ &
2292	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
2293	453 FORMAT (' Mixing length is limited to',F5.2,' * z')
2294	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
2295	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
2296	470 FORMAT (//' Actions during the simulation:'/ &
2297	' -----------------------------'/)
2298	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
2299	' Disturbance amplitude : ',F5.2, ' m/s'/ &
2300	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
2301	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
2302	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2303	' to i/j =',I4)
2304	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2305	F6.3, ' m2/s2')
2306	474 FORMAT (' Random number generator used : ',A/)
2307	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2308	'respectively, if'/ &
2309	' the value is negative) by ',F5.2,' K at the beginning of the',&
2310	' 3D-simulation'/)
2311	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2312	'respectively, if the'/ &
2313	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2314	' the 3D-simulation'/)
2315	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2316	'respectively, if the'/ &
2317	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2318	' the 3D-simulation'/)
2319	480 FORMAT (' Particles:'/ &
2320	' ---------'// &
2321	' Particle advection is active (switched on at t = ', F7.1, &
2322	' s)'/ &
2323	' Start of new particle generations every ',F6.1,' s'/ &
2324	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2325	' bottom: ', A, ' top: ', A/&
2326	' Maximum particle age: ',F9.1,' s'/ &
2327	' Advection stopped at t = ',F9.1,' s'/)
2328	481 FORMAT (' Particles have random start positions'/)
2329	482 FORMAT (' Particles are advected only horizontally'/)
2330	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2331	486 FORMAT (' Particle statistics are written on file'/)
2332	487 FORMAT (' Number of particle groups: ',I2/)
2333	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2334	' minimum timestep for advection:', F8.5/)
2335	489 FORMAT (' Number of particles simultaneously released at each ', &
2336	'point: ', I5/)
2337	490 FORMAT (' Particle group ',I2,':'/ &
2338	' Particle radius: ',E10.3, 'm')
2339	491 FORMAT (' Particle inertia is activated'/ &
2340	' density_ratio (rho_fluid/rho_particle) =',F6.3/)
2341	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2342	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2343	' y:',F8.1,' - ',F8.1,' m'/&
2344	' z:',F8.1,' - ',F8.1,' m'/&
2345	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2346	' m dz = ',F8.1,' m'/)
2347	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2348	F8.2,' s'/)
2349	495 FORMAT (' Number of particles in total domain: ',I10/)
2350	496 FORMAT (' Initial vertical particle positions are interpreted ', &
2351	'as relative to the given topography')
2352	500 FORMAT (//' 1D-Model parameters:'/ &
2353	' -------------------'// &
2354	' Simulation time: ',F8.1,' s'/ &
2355	' Run-controll output every: ',F8.1,' s'/ &
2356	' Vertical profile output every: ',F8.1,' s'/ &
2357	' Mixing length calculation: ',A/ &
2358	' Dissipation calculation: ',A/)
2359	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2360	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2361	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2362	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
2363	506 FORMAT (' Cloud water sedimentation parameterization via Stokes law')
2364	507 FORMAT (' Turbulence effects on precipitation process')
2365	508 FORMAT (' Ventilation effects on evaporation of rain drops')
2366	509 FORMAT (' Slope limiter used for sedimentation process')
2367	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
2368	511 FORMAT (' Sedimentation Courant number: '/&
2369	' C_s =',F4.1,' ')
2370	512 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
2371	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
2372	' Run on host: ',A10,6X,'En-No.: ',I2.2)
2373	600 FORMAT (/' Nesting informations:'/ &
2374	' --------------------'/ &
2375	' Nesting mode: ',A/ &
2376	' Nesting-datatransfer mode: ',A// &
2377	' Nest id parent number lower left coordinates name'/ &
2378	' (*=me) id of PEs x (m) y (m)' )
2379	601 FORMAT (2X,A1,1X,I2.2,6X,I2.2,5X,I5,5X,F8.2,2X,F8.2,5X,A)
2380
2381	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |