Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 168

Last change on this file since 168 was 167, checked in by steinfeld, 17 years ago
Bugfix in header.f90
Property svn:keywords set to `Id`
File size: 62.0 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Bugfix in the output of the characteristic levels of potential temperature,
7	! geostrophic wind, scalar concentration, humidity and leaf area density
8	! Output of turbulence recycling informations
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: header.f90 167 2008-05-15 13:19:25Z raasch $
13	!
14	! 138 2007-11-28 10:03:58Z letzel
15	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
16	! Allow two instead of one digit to specify isosurface and slicer variables.
17	! Output of sorting frequency of particles
18	!
19	! 108 2007-08-24 15:10:38Z letzel
20	! Output of informations for coupled model runs (boundary conditions etc.)
21	! + output of momentumfluxes at the top boundary
22	! Rayleigh damping for ocean, e_init
23	!
24	! 97 2007-06-21 08:23:15Z raasch
25	! Adjustments for the ocean version.
26	! use_pt_reference renamed use_reference
27	!
28	! 87 2007-05-22 15:46:47Z raasch
29	! Bugfix: output of use_upstream_for_tke
30	!
31	! 82 2007-04-16 15:40:52Z raasch
32	! Preprocessor strings for different linux clusters changed to "lc",
33	! routine local_flush is used for buffer flushing
34	!
35	! 76 2007-03-29 00:58:32Z raasch
36	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
37	! output of the loop optimization method, moisture renamed humidity,
38	! output of subversion revision number
39	!
40	! 19 2007-02-23 04:53:48Z raasch
41	! Output of scalar flux applied at top boundary
42	!
43	! RCS Log replace by Id keyword, revision history cleaned up
44	!
45	! Revision 1.63 2006/08/22 13:53:13 raasch
46	! Output of dz_max
47	!
48	! Revision 1.1 1997/08/11 06:17:20 raasch
49	! Initial revision
50	!
51	!
52	! Description:
53	! ------------
54	! Writing a header with all important informations about the actual run.
55	! This subroutine is called three times, two times at the beginning
56	! (writing information on files RUN_CONTROL and HEADER) and one time at the
57	! end of the run, then writing additional information about CPU-usage on file
58	! header.
59	!------------------------------------------------------------------------------!
60
61	USE arrays_3d
62	USE control_parameters
63	USE cloud_parameters
64	USE cpulog
65	USE dvrp_variables
66	USE grid_variables
67	USE indices
68	USE model_1d
69	USE particle_attributes
70	USE pegrid
71	USE spectrum
72
73	IMPLICIT NONE
74
75	CHARACTER (LEN=1) :: prec
76	CHARACTER (LEN=2) :: do2d_mode
77	CHARACTER (LEN=5) :: section_chr
78	CHARACTER (LEN=9) :: time_to_string
79	CHARACTER (LEN=10) :: coor_chr, host_chr
80	CHARACTER (LEN=16) :: begin_chr
81	CHARACTER (LEN=21) :: ver_rev
82	CHARACTER (LEN=40) :: output_format
83	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
84	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
85	run_classification
86	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
87	temperatures, ugcomponent, vgcomponent
88	CHARACTER (LEN=85) :: roben, runten
89
90	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
91	REAL :: cpuseconds_per_simulated_second
92
93	!
94	!-- Open the output file. At the end of the simulation, output is directed
95	!-- to unit 19.
96	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
97	.NOT. simulated_time_at_begin /= simulated_time ) THEN
98	io = 15 ! header output on file RUN_CONTROL
99	ELSE
100	io = 19 ! header output on file HEADER
101	ENDIF
102	CALL check_open( io )
103
104	!
105	!-- At the end of the run, output file (HEADER) will be rewritten with
106	!-- new informations
107	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
108
109	!
110	!-- Determine kind of model run
111	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
112	run_classification = '3D - restart run'
113	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
114	run_classification = '3D - run using 3D - prerun data'
115	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
116	run_classification = '3D - run without 1D - prerun'
117	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
118	run_classification = '3D - run with 1D - prerun'
119	ELSE
120	PRINT*,'+++ header: unknown action(s): ',initializing_actions
121	ENDIF
122	IF ( ocean ) THEN
123	run_classification = 'ocean - ' // run_classification
124	ELSE
125	run_classification = 'atmosphere - ' // run_classification
126	ENDIF
127
128	!
129	!-- Run-identification, date, time, host
130	host_chr = host(1:10)
131	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
132	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
133	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
134	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
135	ADJUSTR( host_chr )
136	#if defined( __parallel )
137	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
138	char1 = 'calculated'
139	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
140	host(1:2) == 'lc' ) .AND. &
141	npex == -1 .AND. pdims(2) == 1 ) THEN
142	char1 = 'forced'
143	ELSE
144	char1 = 'predefined'
145	ENDIF
146	IF ( threads_per_task == 1 ) THEN
147	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
148	ELSE
149	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
150	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
151	ENDIF
152	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
153	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
154	npex == -1 .AND. pdims(2) == 1 ) &
155	THEN
156	WRITE ( io, 106 )
157	ELSEIF ( pdims(2) == 1 ) THEN
158	WRITE ( io, 107 ) 'x'
159	ELSEIF ( pdims(1) == 1 ) THEN
160	WRITE ( io, 107 ) 'y'
161	ENDIF
162	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
163	#endif
164	WRITE ( io, 99 )
165
166	!
167	!-- Numerical schemes
168	WRITE ( io, 110 )
169	IF ( psolver(1:7) == 'poisfft' ) THEN
170	WRITE ( io, 111 ) TRIM( fft_method )
171	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
172	ELSEIF ( psolver == 'sor' ) THEN
173	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
174	ELSEIF ( psolver == 'multigrid' ) THEN
175	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
176	IF ( mg_cycles == -1 ) THEN
177	WRITE ( io, 140 ) residual_limit
178	ELSE
179	WRITE ( io, 141 ) mg_cycles
180	ENDIF
181	IF ( mg_switch_to_pe0_level == 0 ) THEN
182	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
183	nzt_mg(1)
184	ELSE
185	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
186	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
187	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
188	nzt_mg(mg_switch_to_pe0_level), &
189	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
190	nzt_mg(1)
191	ENDIF
192	ENDIF
193	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
194	THEN
195	WRITE ( io, 142 )
196	ENDIF
197
198	IF ( momentum_advec == 'pw-scheme' ) THEN
199	WRITE ( io, 113 )
200	ELSE
201	WRITE ( io, 114 )
202	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
203	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
204	overshoot_limit_w /= 0.0 ) THEN
205	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
206	overshoot_limit_w
207	ENDIF
208	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
209	ups_limit_w /= 0.0 ) &
210	THEN
211	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
212	ENDIF
213	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
214	ENDIF
215	IF ( scalar_advec == 'pw-scheme' ) THEN
216	WRITE ( io, 116 )
217	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
218	WRITE ( io, 117 )
219	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
220	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
221	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
222	ENDIF
223	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
224	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
225	ENDIF
226	ELSE
227	WRITE ( io, 118 )
228	ENDIF
229
230	WRITE ( io, 139 ) TRIM( loop_optimization )
231
232	IF ( galilei_transformation ) THEN
233	IF ( use_ug_for_galilei_tr ) THEN
234	char1 = 'geostrophic wind'
235	ELSE
236	char1 = 'mean wind in model domain'
237	ENDIF
238	IF ( simulated_time_at_begin == simulated_time ) THEN
239	char2 = 'at the start of the run'
240	ELSE
241	char2 = 'at the end of the run'
242	ENDIF
243	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
244	advected_distance_x/1000.0, advected_distance_y/1000.0
245	ENDIF
246	IF ( timestep_scheme == 'leapfrog' ) THEN
247	WRITE ( io, 120 )
248	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
249	WRITE ( io, 121 )
250	ELSE
251	WRITE ( io, 122 ) timestep_scheme
252	ENDIF
253	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
254	IF ( rayleigh_damping_factor /= 0.0 ) THEN
255	IF ( .NOT. ocean ) THEN
256	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
257	rayleigh_damping_factor
258	ELSE
259	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
260	rayleigh_damping_factor
261	ENDIF
262	ENDIF
263	IF ( humidity ) THEN
264	IF ( .NOT. cloud_physics ) THEN
265	WRITE ( io, 129 )
266	ELSE
267	WRITE ( io, 130 )
268	WRITE ( io, 131 )
269	IF ( radiation ) WRITE ( io, 132 )
270	IF ( precipitation ) WRITE ( io, 133 )
271	ENDIF
272	ENDIF
273	IF ( passive_scalar ) WRITE ( io, 134 )
274	IF ( conserve_volume_flow ) WRITE ( io, 150 )
275	WRITE ( io, 99 )
276
277	!
278	!-- Runtime and timestep informations
279	WRITE ( io, 200 )
280	IF ( .NOT. dt_fixed ) THEN
281	WRITE ( io, 201 ) dt_max, cfl_factor
282	ELSE
283	WRITE ( io, 202 ) dt
284	ENDIF
285	WRITE ( io, 203 ) simulated_time_at_begin, end_time
286
287	IF ( time_restart /= 9999999.9 .AND. &
288	simulated_time_at_begin == simulated_time ) THEN
289	IF ( dt_restart == 9999999.9 ) THEN
290	WRITE ( io, 204 ) ' Restart at: ',time_restart
291	ELSE
292	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
293	ENDIF
294	ENDIF
295
296	IF ( simulated_time_at_begin /= simulated_time ) THEN
297	i = MAX ( log_point_s(10)%counts, 1 )
298	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
299	cpuseconds_per_simulated_second = 0.0
300	ELSE
301	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
302	( simulated_time - &
303	simulated_time_at_begin )
304	ENDIF
305	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
306	log_point_s(10)%sum / REAL( i ), &
307	cpuseconds_per_simulated_second
308	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
309	IF ( dt_restart == 9999999.9 ) THEN
310	WRITE ( io, 204 ) ' Next restart at: ',time_restart
311	ELSE
312	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
313	ENDIF
314	ENDIF
315	ENDIF
316
317	!
318	!-- Computational grid
319	IF ( .NOT. ocean ) THEN
320	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
321	IF ( dz_stretch_level_index < nzt+1 ) THEN
322	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
323	dz_stretch_factor, dz_max
324	ENDIF
325	ELSE
326	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
327	IF ( dz_stretch_level_index > 0 ) THEN
328	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
329	dz_stretch_factor, dz_max
330	ENDIF
331	ENDIF
332	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
333	MIN( nnz+2, nzt+2 )
334	IF ( numprocs > 1 ) THEN
335	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
336	WRITE ( io, 255 )
337	ELSE
338	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
339	ENDIF
340	ENDIF
341	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
342
343	!
344	!-- Topography
345	WRITE ( io, 270 ) topography
346	SELECT CASE ( TRIM( topography ) )
347
348	CASE ( 'flat' )
349	! no actions necessary
350
351	CASE ( 'single_building' )
352	blx = INT( building_length_x / dx )
353	bly = INT( building_length_y / dy )
354	bh = INT( building_height / dz )
355
356	IF ( building_wall_left == 9999999.9 ) THEN
357	building_wall_left = ( nx + 1 - blx ) / 2 * dx
358	ENDIF
359	bxl = INT ( building_wall_left / dx + 0.5 )
360	bxr = bxl + blx
361
362	IF ( building_wall_south == 9999999.9 ) THEN
363	building_wall_south = ( ny + 1 - bly ) / 2 * dy
364	ENDIF
365	bys = INT ( building_wall_south / dy + 0.5 )
366	byn = bys + bly
367
368	WRITE ( io, 271 ) building_length_x, building_length_y, &
369	building_height, bxl, bxr, bys, byn
370
371	END SELECT
372
373	IF ( plant_canopy ) THEN
374
375	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
376	IF ( passive_scalar ) THEN
377	WRITE ( io, 281 ) scalar_exchange_coefficient, &
378	leaf_surface_concentration
379	ENDIF
380
381	!
382	!-- Heat flux at the top of vegetation
383	WRITE ( io, 282 ) cthf
384
385	!
386	!-- Leaf area density profile
387	!-- Building output strings, starting with surface value
388	WRITE ( learde, '(F6.2)' ) lad_surface
389	gradients = '------'
390	slices = ' 0'
391	coordinates = ' 0.0'
392	i = 1
393	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
394
395	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
396	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
397
398	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
399	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
400
401	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
402	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
403
404	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
405	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
406
407	i = i + 1
408	ENDDO
409
410	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
411	TRIM( gradients ), TRIM( slices )
412
413	ENDIF
414
415	!
416	!-- Boundary conditions
417	IF ( ibc_p_b == 0 ) THEN
418	runten = 'p(0) = 0 \|'
419	ELSEIF ( ibc_p_b == 1 ) THEN
420	runten = 'p(0) = p(1) \|'
421	ELSE
422	runten = 'p(0) = p(1) +R\|'
423	ENDIF
424	IF ( ibc_p_t == 0 ) THEN
425	roben = 'p(nzt+1) = 0 \|'
426	ELSE
427	roben = 'p(nzt+1) = p(nzt) \|'
428	ENDIF
429
430	IF ( ibc_uv_b == 0 ) THEN
431	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
432	ELSE
433	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
434	ENDIF
435	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
436	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
437	ELSEIF ( ibc_uv_t == 0 ) THEN
438	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
439	ELSE
440	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
441	ENDIF
442
443	IF ( ibc_pt_b == 0 ) THEN
444	runten = TRIM( runten ) // ' pt(0) = pt_surface'
445	ELSEIF ( ibc_pt_b == 1 ) THEN
446	runten = TRIM( runten ) // ' pt(0) = pt(1)'
447	ELSEIF ( ibc_pt_b == 2 ) THEN
448	runten = TRIM( runten ) // ' pt(0) = from coupled model'
449	ENDIF
450	IF ( ibc_pt_t == 0 ) THEN
451	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
452	ELSEIF( ibc_pt_t == 1 ) THEN
453	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
454	ELSEIF( ibc_pt_t == 2 ) THEN
455	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
456	ENDIF
457
458	WRITE ( io, 300 ) runten, roben
459
460	IF ( .NOT. constant_diffusion ) THEN
461	IF ( ibc_e_b == 1 ) THEN
462	runten = 'e(0) = e(1)'
463	ELSE
464	runten = 'e(0) = e(1) = (u/0.1)*2'
465	ENDIF
466	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
467
468	WRITE ( io, 301 ) 'e', runten, roben
469
470	ENDIF
471
472	IF ( ocean ) THEN
473	runten = 'sa(0) = sa(1)'
474	IF ( ibc_sa_t == 0 ) THEN
475	roben = 'sa(nzt+1) = sa_surface'
476	ELSE
477	roben = 'sa(nzt+1) = sa(nzt)'
478	ENDIF
479	WRITE ( io, 301 ) 'sa', runten, roben
480	ENDIF
481
482	IF ( humidity ) THEN
483	IF ( ibc_q_b == 0 ) THEN
484	runten = 'q(0) = q_surface'
485	ELSE
486	runten = 'q(0) = q(1)'
487	ENDIF
488	IF ( ibc_q_t == 0 ) THEN
489	roben = 'q(nzt) = q_top'
490	ELSE
491	roben = 'q(nzt) = q(nzt-1) + dq/dz'
492	ENDIF
493	WRITE ( io, 301 ) 'q', runten, roben
494	ENDIF
495
496	IF ( passive_scalar ) THEN
497	IF ( ibc_q_b == 0 ) THEN
498	runten = 's(0) = s_surface'
499	ELSE
500	runten = 's(0) = s(1)'
501	ENDIF
502	IF ( ibc_q_t == 0 ) THEN
503	roben = 's(nzt) = s_top'
504	ELSE
505	roben = 's(nzt) = s(nzt-1) + ds/dz'
506	ENDIF
507	WRITE ( io, 301 ) 's', runten, roben
508	ENDIF
509
510	IF ( use_surface_fluxes ) THEN
511	WRITE ( io, 303 )
512	IF ( constant_heatflux ) THEN
513	WRITE ( io, 306 ) surface_heatflux
514	IF ( random_heatflux ) WRITE ( io, 307 )
515	ENDIF
516	IF ( humidity .AND. constant_waterflux ) THEN
517	WRITE ( io, 311 ) surface_waterflux
518	ENDIF
519	IF ( passive_scalar .AND. constant_waterflux ) THEN
520	WRITE ( io, 313 ) surface_waterflux
521	ENDIF
522	ENDIF
523
524	IF ( use_top_fluxes ) THEN
525	WRITE ( io, 304 )
526	IF ( coupling_mode == 'uncoupled' ) THEN
527	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
528	IF ( constant_top_heatflux ) THEN
529	WRITE ( io, 306 ) top_heatflux
530	ENDIF
531	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
532	WRITE ( io, 316 )
533	ENDIF
534	IF ( ocean .AND. constant_top_salinityflux ) THEN
535	WRITE ( io, 309 ) top_salinityflux
536	ENDIF
537	IF ( humidity .OR. passive_scalar ) THEN
538	WRITE ( io, 315 )
539	ENDIF
540	ENDIF
541
542	IF ( prandtl_layer ) THEN
543	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
544	rif_min, rif_max
545	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
546	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
547	WRITE ( io, 312 )
548	ENDIF
549	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
550	WRITE ( io, 314 )
551	ENDIF
552	ELSE
553	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
554	WRITE ( io, 310 ) rif_min, rif_max
555	ENDIF
556	ENDIF
557
558	WRITE ( io, 317 ) bc_lr, bc_ns
559	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
560	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
561	IF ( turbulent_inflow ) THEN
562	WRITE ( io, 319 ) recycling_width, recycling_plane, &
563	inflow_damping_height, inflow_damping_width
564	ENDIF
565	ENDIF
566
567	!
568	!-- Listing of 1D-profiles
569	WRITE ( io, 325 ) dt_dopr_listing
570	IF ( averaging_interval_pr /= 0.0 ) THEN
571	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
572	ENDIF
573
574	!
575	!-- DATA output
576	WRITE ( io, 330 )
577	IF ( averaging_interval_pr /= 0.0 ) THEN
578	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
579	ENDIF
580
581	!
582	!-- 1D-profiles
583	dopr_chr = 'Profile:'
584	IF ( dopr_n /= 0 ) THEN
585	WRITE ( io, 331 )
586
587	output_format = ''
588	IF ( netcdf_output ) THEN
589	IF ( netcdf_64bit ) THEN
590	output_format = 'netcdf (64 bit offset)'
591	ELSE
592	output_format = 'netcdf'
593	ENDIF
594	ENDIF
595	IF ( profil_output ) THEN
596	IF ( netcdf_output ) THEN
597	output_format = TRIM( output_format ) // ' and profil'
598	ELSE
599	output_format = 'profil'
600	ENDIF
601	ENDIF
602	WRITE ( io, 345 ) output_format
603
604	DO i = 1, dopr_n
605	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
606	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
607	WRITE ( io, 332 ) dopr_chr
608	dopr_chr = ' :'
609	ENDIF
610	ENDDO
611
612	IF ( dopr_chr /= '' ) THEN
613	WRITE ( io, 332 ) dopr_chr
614	ENDIF
615	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
616	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
617	ENDIF
618
619	!
620	!-- 2D-arrays
621	DO av = 0, 1
622
623	i = 1
624	do2d_xy = ''
625	do2d_xz = ''
626	do2d_yz = ''
627	DO WHILE ( do2d(av,i) /= ' ' )
628
629	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
630	do2d_mode = do2d(av,i)(l-1:l)
631
632	SELECT CASE ( do2d_mode )
633	CASE ( 'xy' )
634	ll = LEN_TRIM( do2d_xy )
635	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
636	CASE ( 'xz' )
637	ll = LEN_TRIM( do2d_xz )
638	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
639	CASE ( 'yz' )
640	ll = LEN_TRIM( do2d_yz )
641	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
642	END SELECT
643
644	i = i + 1
645
646	ENDDO
647
648	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
649	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
650	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
651	( netcdf_output .OR. iso2d_output ) ) THEN
652
653	IF ( av == 0 ) THEN
654	WRITE ( io, 334 ) ''
655	ELSE
656	WRITE ( io, 334 ) '(time-averaged)'
657	ENDIF
658
659	IF ( do2d_at_begin ) THEN
660	begin_chr = 'and at the start'
661	ELSE
662	begin_chr = ''
663	ENDIF
664
665	output_format = ''
666	IF ( netcdf_output ) THEN
667	IF ( netcdf_64bit ) THEN
668	output_format = 'netcdf (64 bit offset)'
669	ELSE
670	output_format = 'netcdf'
671	ENDIF
672	ENDIF
673	IF ( iso2d_output ) THEN
674	IF ( netcdf_output ) THEN
675	output_format = TRIM( output_format ) // ' and iso2d'
676	ELSE
677	output_format = 'iso2d'
678	ENDIF
679	ENDIF
680	WRITE ( io, 345 ) output_format
681
682	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
683	i = 1
684	slices = '/'
685	coordinates = '/'
686	!
687	!-- Building strings with index and coordinate informations of the
688	!-- slices
689	DO WHILE ( section(i,1) /= -9999 )
690
691	WRITE (section_chr,'(I5)') section(i,1)
692	section_chr = ADJUSTL( section_chr )
693	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
694
695	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
696	coor_chr = ADJUSTL( coor_chr )
697	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
698
699	i = i + 1
700	ENDDO
701	IF ( av == 0 ) THEN
702	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
703	TRIM( begin_chr ), 'k', TRIM( slices ), &
704	TRIM( coordinates )
705	IF ( skip_time_do2d_xy /= 0.0 ) THEN
706	WRITE ( io, 339 ) skip_time_do2d_xy
707	ENDIF
708	ELSE
709	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
710	TRIM( begin_chr ), averaging_interval, &
711	dt_averaging_input, 'k', TRIM( slices ), &
712	TRIM( coordinates )
713	IF ( skip_time_data_output_av /= 0.0 ) THEN
714	WRITE ( io, 339 ) skip_time_data_output_av
715	ENDIF
716	ENDIF
717
718	ENDIF
719
720	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
721	i = 1
722	slices = '/'
723	coordinates = '/'
724	!
725	!-- Building strings with index and coordinate informations of the
726	!-- slices
727	DO WHILE ( section(i,2) /= -9999 )
728
729	WRITE (section_chr,'(I5)') section(i,2)
730	section_chr = ADJUSTL( section_chr )
731	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
732
733	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
734	coor_chr = ADJUSTL( coor_chr )
735	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
736
737	i = i + 1
738	ENDDO
739	IF ( av == 0 ) THEN
740	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
741	TRIM( begin_chr ), 'j', TRIM( slices ), &
742	TRIM( coordinates )
743	IF ( skip_time_do2d_xz /= 0.0 ) THEN
744	WRITE ( io, 339 ) skip_time_do2d_xz
745	ENDIF
746	ELSE
747	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
748	TRIM( begin_chr ), averaging_interval, &
749	dt_averaging_input, 'j', TRIM( slices ), &
750	TRIM( coordinates )
751	IF ( skip_time_data_output_av /= 0.0 ) THEN
752	WRITE ( io, 339 ) skip_time_data_output_av
753	ENDIF
754	ENDIF
755	ENDIF
756
757	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
758	i = 1
759	slices = '/'
760	coordinates = '/'
761	!
762	!-- Building strings with index and coordinate informations of the
763	!-- slices
764	DO WHILE ( section(i,3) /= -9999 )
765
766	WRITE (section_chr,'(I5)') section(i,3)
767	section_chr = ADJUSTL( section_chr )
768	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
769
770	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
771	coor_chr = ADJUSTL( coor_chr )
772	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
773
774	i = i + 1
775	ENDDO
776	IF ( av == 0 ) THEN
777	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
778	TRIM( begin_chr ), 'i', TRIM( slices ), &
779	TRIM( coordinates )
780	IF ( skip_time_do2d_yz /= 0.0 ) THEN
781	WRITE ( io, 339 ) skip_time_do2d_yz
782	ENDIF
783	ELSE
784	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
785	TRIM( begin_chr ), averaging_interval, &
786	dt_averaging_input, 'i', TRIM( slices ), &
787	TRIM( coordinates )
788	IF ( skip_time_data_output_av /= 0.0 ) THEN
789	WRITE ( io, 339 ) skip_time_data_output_av
790	ENDIF
791	ENDIF
792	ENDIF
793
794	ENDIF
795
796	ENDDO
797
798	!
799	!-- 3d-arrays
800	DO av = 0, 1
801
802	i = 1
803	do3d_chr = ''
804	DO WHILE ( do3d(av,i) /= ' ' )
805
806	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
807	i = i + 1
808
809	ENDDO
810
811	IF ( do3d_chr /= '' ) THEN
812	IF ( av == 0 ) THEN
813	WRITE ( io, 336 ) ''
814	ELSE
815	WRITE ( io, 336 ) '(time-averaged)'
816	ENDIF
817
818	output_format = ''
819	IF ( netcdf_output ) THEN
820	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
821	output_format = 'netcdf (64 bit offset)'
822	ELSE
823	output_format = 'netcdf'
824	ENDIF
825	ENDIF
826	IF ( avs_output ) THEN
827	IF ( netcdf_output ) THEN
828	output_format = TRIM( output_format ) // ' and avs'
829	ELSE
830	output_format = 'avs'
831	ENDIF
832	ENDIF
833	WRITE ( io, 345 ) output_format
834
835	IF ( do3d_at_begin ) THEN
836	begin_chr = 'and at the start'
837	ELSE
838	begin_chr = ''
839	ENDIF
840	IF ( av == 0 ) THEN
841	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
842	zu(nz_do3d), nz_do3d
843	ELSE
844	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
845	TRIM( begin_chr ), averaging_interval, &
846	dt_averaging_input, zu(nz_do3d), nz_do3d
847	ENDIF
848
849	IF ( do3d_compress ) THEN
850	do3d_chr = ''
851	i = 1
852	DO WHILE ( do3d(av,i) /= ' ' )
853
854	SELECT CASE ( do3d(av,i) )
855	CASE ( 'u' )
856	j = 1
857	CASE ( 'v' )
858	j = 2
859	CASE ( 'w' )
860	j = 3
861	CASE ( 'p' )
862	j = 4
863	CASE ( 'pt' )
864	j = 5
865	END SELECT
866	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
867	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
868	':' // prec // ','
869	i = i + 1
870
871	ENDDO
872	WRITE ( io, 338 ) do3d_chr
873
874	ENDIF
875
876	IF ( av == 0 ) THEN
877	IF ( skip_time_do3d /= 0.0 ) THEN
878	WRITE ( io, 339 ) skip_time_do3d
879	ENDIF
880	ELSE
881	IF ( skip_time_data_output_av /= 0.0 ) THEN
882	WRITE ( io, 339 ) skip_time_data_output_av
883	ENDIF
884	ENDIF
885
886	ENDIF
887
888	ENDDO
889
890	!
891	!-- Timeseries
892	IF ( dt_dots /= 9999999.9 ) THEN
893	WRITE ( io, 340 )
894
895	output_format = ''
896	IF ( netcdf_output ) THEN
897	IF ( netcdf_64bit ) THEN
898	output_format = 'netcdf (64 bit offset)'
899	ELSE
900	output_format = 'netcdf'
901	ENDIF
902	ENDIF
903	IF ( profil_output ) THEN
904	IF ( netcdf_output ) THEN
905	output_format = TRIM( output_format ) // ' and profil'
906	ELSE
907	output_format = 'profil'
908	ENDIF
909	ENDIF
910	WRITE ( io, 345 ) output_format
911	WRITE ( io, 341 ) dt_dots
912	ENDIF
913
914	#if defined( __dvrp_graphics )
915	!
916	!-- Dvrp-output
917	IF ( dt_dvrp /= 9999999.9 ) THEN
918	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
919	TRIM( dvrp_username ), TRIM( dvrp_directory )
920	i = 1
921	l = 0
922	DO WHILE ( mode_dvrp(i) /= ' ' )
923	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
924	READ ( mode_dvrp(i), '(10X,I2)' ) j
925	l = l + 1
926	IF ( do3d(0,j) /= ' ' ) THEN
927	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
928	ENDIF
929	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
930	READ ( mode_dvrp(i), '(6X,I2)' ) j
931	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
932	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
933	WRITE ( io, 363 )
934	ENDIF
935	i = i + 1
936	ENDDO
937	ENDIF
938	#endif
939
940	#if defined( __spectra )
941	!
942	!-- Spectra output
943	IF ( dt_dosp /= 9999999.9 ) THEN
944	WRITE ( io, 370 )
945
946	output_format = ''
947	IF ( netcdf_output ) THEN
948	IF ( netcdf_64bit ) THEN
949	output_format = 'netcdf (64 bit offset)'
950	ELSE
951	output_format = 'netcdf'
952	ENDIF
953	ENDIF
954	IF ( profil_output ) THEN
955	IF ( netcdf_output ) THEN
956	output_format = TRIM( output_format ) // ' and profil'
957	ELSE
958	output_format = 'profil'
959	ENDIF
960	ENDIF
961	WRITE ( io, 345 ) output_format
962	WRITE ( io, 371 ) dt_dosp
963	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
964	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
965	( spectra_direction(i), i = 1,10 ), &
966	( comp_spectra_level(i), i = 1,10 ), &
967	( plot_spectra_level(i), i = 1,10 ), &
968	averaging_interval_sp, dt_averaging_input_pr
969	ENDIF
970	#endif
971
972	WRITE ( io, 99 )
973
974	!
975	!-- Physical quantities
976	WRITE ( io, 400 )
977
978	!
979	!-- Geostrophic parameters
980	WRITE ( io, 410 ) omega, phi, f, fs
981
982	!
983	!-- Other quantities
984	WRITE ( io, 411 ) g
985	IF ( use_reference ) THEN
986	IF ( ocean ) THEN
987	WRITE ( io, 412 ) prho_reference
988	ELSE
989	WRITE ( io, 413 ) pt_reference
990	ENDIF
991	ENDIF
992
993	!
994	!-- Cloud physics parameters
995	IF ( cloud_physics ) THEN
996	WRITE ( io, 415 )
997	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
998	ENDIF
999
1000	!-- Profile of the geostrophic wind (component ug)
1001	!-- Building output strings
1002	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1003	gradients = '------'
1004	slices = ' 0'
1005	coordinates = ' 0.0'
1006	i = 1
1007	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1008
1009	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1010	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1011
1012	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1013	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1014
1015	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1016	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1017
1018	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1019	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1020
1021	i = i + 1
1022	ENDDO
1023
1024	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1025	TRIM( gradients ), TRIM( slices )
1026
1027	!-- Profile of the geostrophic wind (component vg)
1028	!-- Building output strings
1029	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1030	gradients = '------'
1031	slices = ' 0'
1032	coordinates = ' 0.0'
1033	i = 1
1034	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1035
1036	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1037	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1038
1039	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1040	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1041
1042	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1043	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1044
1045	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1046	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1047
1048	i = i + 1
1049	ENDDO
1050
1051	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1052	TRIM( gradients ), TRIM( slices )
1053
1054	!
1055	!-- Initial temperature profile
1056	!-- Building output strings, starting with surface temperature
1057	WRITE ( temperatures, '(F6.2)' ) pt_surface
1058	gradients = '------'
1059	slices = ' 0'
1060	coordinates = ' 0.0'
1061	i = 1
1062	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1063
1064	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1065	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1066
1067	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1068	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1069
1070	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1071	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1072
1073	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1074	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1075
1076	i = i + 1
1077	ENDDO
1078
1079	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1080	TRIM( gradients ), TRIM( slices )
1081
1082	!
1083	!-- Initial humidity profile
1084	!-- Building output strings, starting with surface humidity
1085	IF ( humidity .OR. passive_scalar ) THEN
1086	WRITE ( temperatures, '(E8.1)' ) q_surface
1087	gradients = '--------'
1088	slices = ' 0'
1089	coordinates = ' 0.0'
1090	i = 1
1091	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1092
1093	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1094	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1095
1096	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1097	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1098
1099	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1100	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1101
1102	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1103	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1104
1105	i = i + 1
1106	ENDDO
1107
1108	IF ( humidity ) THEN
1109	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1110	TRIM( gradients ), TRIM( slices )
1111	ELSE
1112	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1113	TRIM( gradients ), TRIM( slices )
1114	ENDIF
1115	ENDIF
1116
1117	!
1118	!-- Initial salinity profile
1119	!-- Building output strings, starting with surface salinity
1120	IF ( ocean ) THEN
1121	WRITE ( temperatures, '(F6.2)' ) sa_surface
1122	gradients = '------'
1123	slices = ' 0'
1124	coordinates = ' 0.0'
1125	i = 1
1126	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1127
1128	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1129	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1130
1131	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1132	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1133
1134	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1135	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1136
1137	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1138	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1139
1140	i = i + 1
1141	ENDDO
1142
1143	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1144	TRIM( gradients ), TRIM( slices )
1145	ENDIF
1146
1147	!
1148	!-- LES / turbulence parameters
1149	WRITE ( io, 450 )
1150
1151	!--
1152	! ... LES-constants used must still be added here
1153	!--
1154	IF ( constant_diffusion ) THEN
1155	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1156	prandtl_number
1157	ENDIF
1158	IF ( .NOT. constant_diffusion) THEN
1159	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1160	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1161	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1162	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1163	ENDIF
1164
1165	!
1166	!-- Special actions during the run
1167	WRITE ( io, 470 )
1168	IF ( create_disturbances ) THEN
1169	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1170	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1171	zu(disturbance_level_ind_t), disturbance_level_ind_t
1172	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1173	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1174	ELSE
1175	WRITE ( io, 473 ) disturbance_energy_limit
1176	ENDIF
1177	WRITE ( io, 474 ) TRIM( random_generator )
1178	ENDIF
1179	IF ( pt_surface_initial_change /= 0.0 ) THEN
1180	WRITE ( io, 475 ) pt_surface_initial_change
1181	ENDIF
1182	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1183	WRITE ( io, 476 ) q_surface_initial_change
1184	ENDIF
1185	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1186	WRITE ( io, 477 ) q_surface_initial_change
1187	ENDIF
1188
1189	IF ( particle_advection ) THEN
1190	!
1191	!-- Particle attributes
1192	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1193	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1194	end_time_prel, dt_sort_particles
1195	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1196	IF ( random_start_position ) WRITE ( io, 481 )
1197	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1198	WRITE ( io, 495 ) total_number_of_particles
1199	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1200	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1201	WRITE ( io, 483 ) maximum_number_of_tailpoints
1202	IF ( minimum_tailpoint_distance /= 0 ) THEN
1203	WRITE ( io, 484 ) total_number_of_tails, &
1204	minimum_tailpoint_distance, &
1205	maximum_tailpoint_age
1206	ENDIF
1207	ENDIF
1208	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1209	WRITE ( io, 485 ) dt_write_particle_data
1210	output_format = ''
1211	IF ( netcdf_output ) THEN
1212	IF ( netcdf_64bit ) THEN
1213	output_format = 'netcdf (64 bit offset) and binary'
1214	ELSE
1215	output_format = 'netcdf and binary'
1216	ENDIF
1217	ELSE
1218	output_format = 'binary'
1219	ENDIF
1220	WRITE ( io, 345 ) output_format
1221	ENDIF
1222	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1223	IF ( write_particle_statistics ) WRITE ( io, 486 )
1224
1225	WRITE ( io, 487 ) number_of_particle_groups
1226
1227	DO i = 1, number_of_particle_groups
1228	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1229	WRITE ( io, 490 ) i, 0.0
1230	WRITE ( io, 492 )
1231	ELSE
1232	WRITE ( io, 490 ) i, radius(i)
1233	IF ( density_ratio(i) /= 0.0 ) THEN
1234	WRITE ( io, 491 ) density_ratio(i)
1235	ELSE
1236	WRITE ( io, 492 )
1237	ENDIF
1238	ENDIF
1239	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1240	pdx(i), pdy(i), pdz(i)
1241	ENDDO
1242
1243	ENDIF
1244
1245
1246	!
1247	!-- Parameters of 1D-model
1248	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1249	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1250	mixing_length_1d, dissipation_1d
1251	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1252	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1253	ENDIF
1254	ENDIF
1255
1256	!
1257	!-- User-defined informations
1258	CALL user_header( io )
1259
1260	WRITE ( io, 99 )
1261
1262	!
1263	!-- Write buffer contents to disc immediately
1264	CALL local_flush( io )
1265
1266	!
1267	!-- Here the FORMATs start
1268
1269	99 FORMAT (1X,78('-'))
1270	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1271	1X,'* ',A,' *',11X,A/ &
1272	1X,'*************************',11X,42('-'))
1273	101 FORMAT (37X,'coupled run: ',A/ &
1274	37X,42('-'))
1275	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
1276	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1277	' Run on host: ',A10)
1278	#if defined( __parallel )
1279	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1280	')',1X,A)
1281	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1282	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1283	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1284	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1285	37X,'because the job is running on an SMP-cluster')
1286	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1287	#endif
1288	110 FORMAT (/' Numerical Schemes:'/ &
1289	' -----------------'/)
1290	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1291	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1292	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1293	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1294	' or Upstream')
1295	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1296	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1297	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1298	' or Upstream')
1299	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1300	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1301	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1302	' Translation velocity = ',A/ &
1303	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1304	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1305	' of timestep changes)')
1306	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1307	' timestep changes')
1308	122 FORMAT (' --> Time differencing scheme: ',A)
1309	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1310	' maximum damping coefficient: ',F5.3, ' 1/s')
1311	124 FORMAT (' Spline-overshoots are being suppressed')
1312	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1313	' of'/ &
1314	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1315	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1316	' of'/ &
1317	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1318	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1319	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1320	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1321	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1322	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1323	130 FORMAT (' --> Additional prognostic equation for the total water content')
1324	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1325	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1326	' effective emissivity scheme')
1327	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1328	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1329	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1330	A,'-cycle)'/ &
1331	' number of grid levels: ',I2/ &
1332	' Gauss-Seidel red/black iterations: ',I2)
1333	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1334	I3,')')
1335	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1336	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1337	I3,')'/ &
1338	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1339	I3,')')
1340	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1341	139 FORMAT (' --> Loop optimization method: ',A)
1342	140 FORMAT (' maximum residual allowed: ',E10.3)
1343	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1344	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1345	'step')
1346	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1347	'kinetic energy')
1348	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1349	'conserved')
1350	200 FORMAT (//' Run time and time step information:'/ &
1351	' ----------------------------------'/)
1352	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1353	' CFL-factor: ',F4.2)
1354	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1355	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1356	' End time: ',F9.3,' s')
1357	204 FORMAT ( A,F9.3,' s')
1358	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1359	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1360	' CPU-time used: ',F9.3,' s per timestep: ', &
1361	' ',F9.3,' s'/ &
1362	' per second of simulated tim', &
1363	'e: ',F9.3,' s')
1364	250 FORMAT (//' Computational grid and domain size:'/ &
1365	' ----------------------------------'// &
1366	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1367	' m dz = ',F7.3,' m'/ &
1368	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1369	' m z(u) = ',F10.3,' m'/)
1370	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1371	' factor: ',F5.3/ &
1372	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1373	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1374	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1375	255 FORMAT (' Subdomains have equal size')
1376	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1377	'have smaller sizes'/ &
1378	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1379	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1380	' degrees')
1381	270 FORMAT (//' Topography informations:'/ &
1382	' -----------------------'// &
1383	1X,'Topography: ',A)
1384	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1385	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1386	' / ',I4)
1387	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1388	' ------------------------------'// &
1389	' Canopy mode: ', A / &
1390	' Canopy top: ',I4 / &
1391	' Leaf drag coefficient: ',F6.2 /)
1392	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1393	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1394	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1395	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1396	' Height: ',A,' m'/ &
1397	' Leaf area density: ',A,' m2/m3'/ &
1398	' Gradient: ',A,' m2/m4'/ &
1399	' Gridpoint: ',A)
1400
1401	300 FORMAT (//' Boundary conditions:'/ &
1402	' -------------------'// &
1403	' p uv ', &
1404	' pt'// &
1405	' B. bound.: ',A/ &
1406	' T. bound.: ',A)
1407	301 FORMAT (/' ',A// &
1408	' B. bound.: ',A/ &
1409	' T. bound.: ',A)
1410	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1411	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1412	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1413	'computational u,v-level:'// &
1414	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1415	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1416	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1417	307 FORMAT (' Heatflux has a random normal distribution')
1418	308 FORMAT (' Predefined surface temperature')
1419	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1420	310 FORMAT (//' 1D-Model:'// &
1421	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1422	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1423	312 FORMAT (' Predefined surface humidity')
1424	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1425	314 FORMAT (' Predefined scalar value at the surface')
1426	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1427	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1428	'atmosphere model')
1429	317 FORMAT (//' Lateral boundaries:'/ &
1430	' left/right: ',A/ &
1431	' north/south: ',A)
1432	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1433	'max =',F5.1,' m**2/s')
1434	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1435	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1436	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1437	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1438	' v: ',F9.6,' m2/s2')
1439	325 FORMAT (//' List output:'/ &
1440	' -----------'// &
1441	' 1D-Profiles:'/ &
1442	' Output every ',F8.2,' s')
1443	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1444	' Averaging input every ',F8.2,' s')
1445	330 FORMAT (//' Data output:'/ &
1446	' -----------'/)
1447	331 FORMAT (/' 1D-Profiles:')
1448	332 FORMAT (/' ',A)
1449	333 FORMAT (' Output every ',F8.2,' s',/ &
1450	' Time averaged over ',F8.2,' s'/ &
1451	' Averaging input every ',F8.2,' s')
1452	334 FORMAT (/' 2D-Arrays',A,':')
1453	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1454	' Output every ',F8.2,' s ',A/ &
1455	' Cross sections at ',A1,' = ',A/ &
1456	' scalar-coordinates: ',A,' m'/)
1457	336 FORMAT (/' 3D-Arrays',A,':')
1458	337 FORMAT (/' Arrays: ',A/ &
1459	' Output every ',F8.2,' s ',A/ &
1460	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1461	338 FORMAT (' Compressed data output'/ &
1462	' Decimal precision: ',A/)
1463	339 FORMAT (' No output during initial ',F8.2,' s')
1464	340 FORMAT (/' Time series:')
1465	341 FORMAT (' Output every ',F8.2,' s'/)
1466	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1467	' Output every ',F8.2,' s ',A/ &
1468	' Time averaged over ',F8.2,' s'/ &
1469	' Averaging input every ',F8.2,' s'/ &
1470	' Cross sections at ',A1,' = ',A/ &
1471	' scalar-coordinates: ',A,' m'/)
1472	343 FORMAT (/' Arrays: ',A/ &
1473	' Output every ',F8.2,' s ',A/ &
1474	' Time averaged over ',F8.2,' s'/ &
1475	' Averaging input every ',F8.2,' s'/ &
1476	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1477	345 FORMAT (' Output format: ',A/)
1478	#if defined( __dvrp_graphics )
1479	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1480	' Output every ',F7.1,' s'/ &
1481	' Output mode: ',A/ &
1482	' Host / User: ',A,' / ',A/ &
1483	' Directory: ',A// &
1484	' The sequence contains:')
1485	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1486	362 FORMAT (' Sectional plane ',A)
1487	363 FORMAT (' Particles')
1488	#endif
1489	#if defined( __spectra )
1490	370 FORMAT (' Spectra:')
1491	371 FORMAT (' Output every ',F7.1,' s'/)
1492	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1493	' Directions: ', 10(A5,',')/ &
1494	' height levels k = ', 9(I3,','),I3,'.'/ &
1495	' height levels selected for standard plot:'/ &
1496	' k = ', 9(I3,','),I3,'.'/ &
1497	' Time averaged over ', F7.1, ' s,' / &
1498	' Profiles for the time averaging are taken every ', &
1499	F6.1,' s')
1500	#endif
1501	400 FORMAT (//' Physical quantities:'/ &
1502	' -------------------'/)
1503	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1504	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1505	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1506	' f* = ',F9.6,' 1/s')
1507	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1508	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1509	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1510	415 FORMAT (/' Cloud physics parameters:'/ &
1511	' ------------------------'/)
1512	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1513	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1514	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1515	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1516	' Vapourization heat : L_v = ',E8.2,' J/kg')
1517	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1518	' Height: ',A,' m'/ &
1519	' Temperature: ',A,' K'/ &
1520	' Gradient: ',A,' K/100m'/ &
1521	' Gridpoint: ',A)
1522	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1523	' Height: ',A,' m'/ &
1524	' Humidity: ',A,' kg/kg'/ &
1525	' Gradient: ',A,' (kg/kg)/100m'/ &
1526	' Gridpoint: ',A)
1527	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1528	' Height: ',A,' m'/ &
1529	' Scalar concentration: ',A,' kg/m**3'/ &
1530	' Gradient: ',A,' (kg/m**3)/100m'/ &
1531	' Gridpoint: ',A)
1532	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1533	' Height: ',A,' m'/ &
1534	' ug: ',A,' m/s'/ &
1535	' Gradient: ',A,' 1/100s'/ &
1536	' Gridpoint: ',A)
1537	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1538	' Height: ',A,' m'/ &
1539	' vg: ',A,' m/s'/ &
1540	' Gradient: ',A,' 1/100s'/ &
1541	' Gridpoint: ',A)
1542	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1543	' Height: ',A,' m'/ &
1544	' Salinity: ',A,' psu'/ &
1545	' Gradient: ',A,' psu/100m'/ &
1546	' Gridpoint: ',A)
1547	450 FORMAT (//' LES / Turbulence quantities:'/ &
1548	' ---------------------------'/)
1549	451 FORMAT (' Diffusion coefficients are constant:'/ &
1550	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1551	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1552	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1553	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1554	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1555	470 FORMAT (//' Actions during the simulation:'/ &
1556	' -----------------------------'/)
1557	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1558	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1559	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1560	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1561	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1562	' to i/j =',I4)
1563	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1564	1X,F5.3, ' m2/s2')
1565	474 FORMAT (' Random number generator used : ',A/)
1566	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1567	'respectively, if'/ &
1568	' the value is negative) by ',F5.2,' K at the beginning of the',&
1569	' 3D-simulation'/)
1570	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1571	'respectively, if the'/ &
1572	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1573	' the 3D-simulation'/)
1574	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1575	'respectively, if the'/ &
1576	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1577	' the 3D-simulation'/)
1578	480 FORMAT (' Particles:'/ &
1579	' ---------'// &
1580	' Particle advection is active (switched on at t = ', F7.1, &
1581	' s)'/ &
1582	' Start of new particle generations every ',F6.1,' s'/ &
1583	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1584	' bottom: ', A, ' top: ', A/&
1585	' Maximum particle age: ',F9.1,' s'/ &
1586	' Advection stopped at t = ',F9.1,' s'/ &
1587	' Particles are sorted every ',F9.1,' s'/)
1588	481 FORMAT (' Particles have random start positions'/)
1589	482 FORMAT (' Particles are advected only horizontally'/)
1590	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1591	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1592	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1593	' Maximum age of the end of the tail: ',F8.2,' s')
1594	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1595	486 FORMAT (' Particle statistics are written on file'/)
1596	487 FORMAT (' Number of particle groups: ',I2/)
1597	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1598	' minimum timestep for advection: ', F7.5/)
1599	489 FORMAT (' Number of particles simultaneously released at each ', &
1600	'point: ', I5/)
1601	490 FORMAT (' Particle group ',I2,':'/ &
1602	' Particle radius: ',E10.3, 'm')
1603	491 FORMAT (' Particle inertia is activated'/ &
1604	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1605	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1606	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1607	' y:',F8.1,' - ',F8.1,' m'/&
1608	' z:',F8.1,' - ',F8.1,' m'/&
1609	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1610	' m dz = ',F8.1,' m'/)
1611	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1612	F8.2,' s'/)
1613	495 FORMAT (' Number of particles in total domain: ',I10/)
1614	500 FORMAT (//' 1D-Model parameters:'/ &
1615	' -------------------'// &
1616	' Simulation time: ',F8.1,' s'/ &
1617	' Run-controll output every: ',F8.1,' s'/ &
1618	' Vertical profile output every: ',F8.1,' s'/ &
1619	' Mixing length calculation: ',A/ &
1620	' Dissipation calculation: ',A/)
1621	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1622
1623
1624	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |