Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1579

Last change on this file since 1579 was 1576, checked in by raasch, 10 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 90.7 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2014 Leibniz Universitaet Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1576 2015-03-27 10:23:30Z raasch $
27	!
28	! 1575 2015-03-27 09:56:27Z raasch
29	! adjustments for psolver-queries, output of seed_follows_topography
30	!
31	! 1560 2015-03-06 10:48:54Z keck
32	! output for recycling y shift
33	!
34	! 1557 2015-03-05 16:43:04Z suehring
35	! output for monotonic limiter
36	!
37	! 1551 2015-03-03 14:18:16Z maronga
38	! Added informal output for land surface model and radiation model. Removed typo.
39	!
40	! 1496 2014-12-02 17:25:50Z maronga
41	! Renamed: "radiation -> "cloud_top_radiation"
42	!
43	! 1484 2014-10-21 10:53:05Z kanani
44	! Changes due to new module structure of the plant canopy model:
45	! module plant_canopy_model_mod and output for new canopy model parameters
46	! (alpha_lad, beta_lad, lai_beta,...) added,
47	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
48	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff,
49	! learde renamed leaf_area_density.
50	! Bugfix: DO-WHILE-loop for lad header information additionally restricted
51	! by maximum number of gradient levels (currently 10)
52	!
53	! 1482 2014-10-18 12:34:45Z raasch
54	! information about calculated or predefined virtual processor topology adjusted
55	!
56	! 1468 2014-09-24 14:06:57Z maronga
57	! Adapted for use on up to 6-digit processor cores
58	!
59	! 1429 2014-07-15 12:53:45Z knoop
60	! header exended to provide ensemble_member_nr if specified
61	!
62	! 1376 2014-04-26 11:21:22Z boeske
63	! Correction of typos
64	!
65	! 1365 2014-04-22 15:03:56Z boeske
66	! New section 'Large scale forcing and nudging':
67	! output of large scale forcing and nudging information,
68	! new section for initial profiles created
69	!
70	! 1359 2014-04-11 17:15:14Z hoffmann
71	! dt_sort_particles removed
72	!
73	! 1353 2014-04-08 15:21:23Z heinze
74	! REAL constants provided with KIND-attribute
75	!
76	! 1327 2014-03-21 11:00:16Z raasch
77	! parts concerning iso2d and avs output removed,
78	! -netcdf output queries
79	!
80	! 1324 2014-03-21 09:13:16Z suehring
81	! Bugfix: module spectrum added
82	!
83	! 1322 2014-03-20 16:38:49Z raasch
84	! REAL functions provided with KIND-attribute,
85	! some REAL constants defined as wp-kind
86	!
87	! 1320 2014-03-20 08:40:49Z raasch
88	! ONLY-attribute added to USE-statements,
89	! kind-parameters added to all INTEGER and REAL declaration statements,
90	! kinds are defined in new module kinds,
91	! revision history before 2012 removed,
92	! comment fields (!:) to be used for variable explanations added to
93	! all variable declaration statements
94	!
95	! 1308 2014-03-13 14:58:42Z fricke
96	! output of the fixed number of output time levels
97	! output_format adjusted for masked data if netcdf_data_format > 5
98	!
99	! 1299 2014-03-06 13:15:21Z heinze
100	! output for using large_scale subsidence in combination
101	! with large_scale_forcing
102	! reformatting, more detailed explanations
103	!
104	! 1241 2013-10-30 11:36:58Z heinze
105	! output for nudging + large scale forcing from external file
106	!
107	! 1216 2013-08-26 09:31:42Z raasch
108	! output for transpose_compute_overlap
109	!
110	! 1212 2013-08-15 08:46:27Z raasch
111	! output for poisfft_hybrid removed
112	!
113	! 1179 2013-06-14 05:57:58Z raasch
114	! output of reference_state, use_reference renamed use_single_reference_value
115	!
116	! 1159 2013-05-21 11:58:22Z fricke
117	! +use_cmax
118	!
119	! 1115 2013-03-26 18:16:16Z hoffmann
120	! descriptions for Seifert-Beheng-cloud-physics-scheme added
121	!
122	! 1111 2013-03-08 23:54:10Z raasch
123	! output of accelerator board information
124	! ibc_p_b = 2 removed
125	!
126	! 1108 2013-03-05 07:03:32Z raasch
127	! bugfix for r1106
128	!
129	! 1106 2013-03-04 05:31:38Z raasch
130	! some format changes for coupled runs
131	!
132	! 1092 2013-02-02 11:24:22Z raasch
133	! unused variables removed
134	!
135	! 1036 2012-10-22 13:43:42Z raasch
136	! code put under GPL (PALM 3.9)
137	!
138	! 1031 2012-10-19 14:35:30Z raasch
139	! output of netCDF data format modified
140	!
141	! 1015 2012-09-27 09:23:24Z raasch
142	! output of Adjustment of mixing length to the Prandtl mixing length at first
143	! grid point above ground removed
144	!
145	! 1003 2012-09-14 14:35:53Z raasch
146	! output of information about equal/unequal subdomain size removed
147	!
148	! 1001 2012-09-13 14:08:46Z raasch
149	! all actions concerning leapfrog- and upstream-spline-scheme removed
150	!
151	! 978 2012-08-09 08:28:32Z fricke
152	! -km_damp_max, outflow_damping_width
153	! +pt_damping_factor, pt_damping_width
154	! +z0h
155	!
156	! 964 2012-07-26 09:14:24Z raasch
157	! output of profil-related quantities removed
158	!
159	! 940 2012-07-09 14:31:00Z raasch
160	! Output in case of simulations for pure neutral stratification (no pt-equation
161	! solved)
162	!
163	! 927 2012-06-06 19:15:04Z raasch
164	! output of masking_method for mg-solver
165	!
166	! 868 2012-03-28 12:21:07Z raasch
167	! translation velocity in Galilean transformation changed to 0.6 * ug
168	!
169	! 833 2012-02-22 08:55:55Z maronga
170	! Adjusted format for leaf area density
171	!
172	! 828 2012-02-21 12:00:36Z raasch
173	! output of dissipation_classes + radius_classes
174	!
175	! 825 2012-02-19 03:03:44Z raasch
176	! Output of cloud physics parameters/quantities complemented and restructured
177	!
178	! Revision 1.1 1997/08/11 06:17:20 raasch
179	! Initial revision
180	!
181	!
182	! Description:
183	! ------------
184	! Writing a header with all important information about the actual run.
185	! This subroutine is called three times, two times at the beginning
186	! (writing information on files RUN_CONTROL and HEADER) and one time at the
187	! end of the run, then writing additional information about CPU-usage on file
188	! header.
189	!-----------------------------------------------------------------------------!
190
191	USE arrays_3d, &
192	ONLY: pt_init, qsws, q_init, sa_init, shf, ug, vg, w_subs, zu
193
194	USE control_parameters
195
196	USE cloud_parameters, &
197	ONLY: cp, curvature_solution_effects, c_sedimentation, &
198	limiter_sedimentation, l_v, nc_const, r_d, ventilation_effect
199
200	USE cpulog, &
201	ONLY: log_point_s
202
203	USE dvrp_variables, &
204	ONLY: use_seperate_pe_for_dvrp_output
205
206	USE grid_variables, &
207	ONLY: dx, dy
208
209	USE indices, &
210	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
211	nys_mg, nzt, nzt_mg
212
213	USE kinds
214
215	USE land_surface_model_mod, &
216	ONLY: conserve_water_content, dewfall, land_surface, nzb_soil, &
217	nzt_soil, root_fraction, soil_moisture, soil_temperature, &
218	soil_type, soil_type_name, veg_type, veg_type_name, zs
219
220	USE model_1d, &
221	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
222
223	USE particle_attributes, &
224	ONLY: bc_par_b, bc_par_lr, bc_par_ns, bc_par_t, collision_kernel, &
225	density_ratio, dissipation_classes, dt_min_part, dt_prel, &
226	dt_write_particle_data, end_time_prel, &
227	maximum_number_of_tailpoints, maximum_tailpoint_age, &
228	minimum_tailpoint_distance, number_of_particle_groups, &
229	particle_advection, particle_advection_start, &
230	particles_per_point, pdx, pdy, pdz, psb, psl, psn, psr, pss, &
231	pst, radius, radius_classes, random_start_position, &
232	seed_follows_topography, &
233	total_number_of_particles, use_particle_tails, &
234	use_sgs_for_particles, total_number_of_tails, &
235	vertical_particle_advection, write_particle_statistics
236
237	USE pegrid
238
239	USE plant_canopy_model_mod, &
240	ONLY: alpha_lad, beta_lad, calc_beta_lad_profile, canopy_drag_coeff, &
241	canopy_mode, cthf, lad, lad_surface, lad_vertical_gradient, &
242	lad_vertical_gradient_level, lad_vertical_gradient_level_ind, &
243	lai_beta, leaf_scalar_exch_coeff, leaf_surface_conc, pch_index, &
244	plant_canopy
245
246	USE radiation_model_mod, &
247	ONLY: albedo, day_init, dt_radiation, lambda, net_radiation, &
248	radiation, radiation_scheme, time_utc_init
249
250	USE spectrum, &
251	ONLY: comp_spectra_level, data_output_sp, plot_spectra_level, &
252	spectra_direction
253
254	IMPLICIT NONE
255
256	CHARACTER (LEN=1) :: prec !:
257
258	CHARACTER (LEN=2) :: do2d_mode !:
259
260	CHARACTER (LEN=5) :: section_chr !:
261
262	CHARACTER (LEN=10) :: coor_chr !:
263	CHARACTER (LEN=10) :: host_chr !:
264
265	CHARACTER (LEN=16) :: begin_chr !:
266
267	CHARACTER (LEN=26) :: ver_rev !:
268
269	CHARACTER (LEN=40) :: output_format !:
270
271	CHARACTER (LEN=70) :: char1 !:
272	CHARACTER (LEN=70) :: char2 !:
273	CHARACTER (LEN=70) :: dopr_chr !:
274	CHARACTER (LEN=70) :: do2d_xy !:
275	CHARACTER (LEN=70) :: do2d_xz !:
276	CHARACTER (LEN=70) :: do2d_yz !:
277	CHARACTER (LEN=70) :: do3d_chr !:
278	CHARACTER (LEN=70) :: domask_chr !:
279	CHARACTER (LEN=70) :: run_classification !:
280
281	CHARACTER (LEN=85) :: roben !:
282	CHARACTER (LEN=85) :: runten !:
283
284	CHARACTER (LEN=86) :: coordinates !:
285	CHARACTER (LEN=86) :: gradients !:
286	CHARACTER (LEN=86) :: leaf_area_density !:
287	CHARACTER (LEN=86) :: roots !:
288	CHARACTER (LEN=86) :: slices !:
289	CHARACTER (LEN=86) :: temperatures !:
290	CHARACTER (LEN=86) :: ugcomponent !:
291	CHARACTER (LEN=86) :: vgcomponent !:
292
293	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !:
294
295	INTEGER(iwp) :: av !:
296	INTEGER(iwp) :: bh !:
297	INTEGER(iwp) :: blx !:
298	INTEGER(iwp) :: bly !:
299	INTEGER(iwp) :: bxl !:
300	INTEGER(iwp) :: bxr !:
301	INTEGER(iwp) :: byn !:
302	INTEGER(iwp) :: bys !:
303	INTEGER(iwp) :: ch !:
304	INTEGER(iwp) :: count !:
305	INTEGER(iwp) :: cwx !:
306	INTEGER(iwp) :: cwy !:
307	INTEGER(iwp) :: cxl !:
308	INTEGER(iwp) :: cxr !:
309	INTEGER(iwp) :: cyn !:
310	INTEGER(iwp) :: cys !:
311	INTEGER(iwp) :: dim !:
312	INTEGER(iwp) :: i !:
313	INTEGER(iwp) :: io !:
314	INTEGER(iwp) :: j !:
315	INTEGER(iwp) :: k !:
316	INTEGER(iwp) :: l !:
317	INTEGER(iwp) :: ll !:
318	INTEGER(iwp) :: mpi_type !:
319
320	REAL(wp) :: canopy_height !: canopy height (in m)
321	REAL(wp) :: cpuseconds_per_simulated_second !:
322
323	!
324	!-- Open the output file. At the end of the simulation, output is directed
325	!-- to unit 19.
326	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
327	.NOT. simulated_time_at_begin /= simulated_time ) THEN
328	io = 15 ! header output on file RUN_CONTROL
329	ELSE
330	io = 19 ! header output on file HEADER
331	ENDIF
332	CALL check_open( io )
333
334	!
335	!-- At the end of the run, output file (HEADER) will be rewritten with
336	!-- new information
337	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
338
339	!
340	!-- Determine kind of model run
341	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
342	run_classification = '3D - restart run'
343	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
344	run_classification = '3D - run with cyclic fill of 3D - prerun data'
345	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
346	run_classification = '3D - run without 1D - prerun'
347	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
348	run_classification = '3D - run with 1D - prerun'
349	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
350	run_classification = '3D - run initialized by user'
351	ELSE
352	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
353	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
354	ENDIF
355	IF ( ocean ) THEN
356	run_classification = 'ocean - ' // run_classification
357	ELSE
358	run_classification = 'atmosphere - ' // run_classification
359	ENDIF
360
361	!
362	!-- Run-identification, date, time, host
363	host_chr = host(1:10)
364	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
365	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
366	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
367	#if defined( __mpi2 )
368	mpi_type = 2
369	#else
370	mpi_type = 1
371	#endif
372	WRITE ( io, 101 ) mpi_type, coupling_mode
373	ENDIF
374	#if defined( __parallel )
375	IF ( coupling_start_time /= 0.0_wp ) THEN
376	IF ( coupling_start_time > simulated_time_at_begin ) THEN
377	WRITE ( io, 109 )
378	ELSE
379	WRITE ( io, 114 )
380	ENDIF
381	ENDIF
382	#endif
383	IF ( ensemble_member_nr /= 0 ) THEN
384	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
385	ADJUSTR( host_chr ), ensemble_member_nr
386	ELSE
387	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
388	ADJUSTR( host_chr )
389	ENDIF
390	#if defined( __parallel )
391	IF ( npex == -1 .AND. npey == -1 ) THEN
392	char1 = 'calculated'
393	ELSE
394	char1 = 'predefined'
395	ENDIF
396	IF ( threads_per_task == 1 ) THEN
397	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
398	ELSE
399	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
400	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
401	ENDIF
402	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
403	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
404	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
405	npex == -1 .AND. pdims(2) == 1 ) &
406	THEN
407	WRITE ( io, 106 )
408	ELSEIF ( pdims(2) == 1 ) THEN
409	WRITE ( io, 107 ) 'x'
410	ELSEIF ( pdims(1) == 1 ) THEN
411	WRITE ( io, 107 ) 'y'
412	ENDIF
413	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
414	IF ( numprocs /= maximum_parallel_io_streams ) THEN
415	WRITE ( io, 108 ) maximum_parallel_io_streams
416	ENDIF
417	#else
418	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
419	#endif
420	WRITE ( io, 99 )
421
422	!
423	!-- Numerical schemes
424	WRITE ( io, 110 )
425	IF ( psolver(1:7) == 'poisfft' ) THEN
426	WRITE ( io, 111 ) TRIM( fft_method )
427	IF ( transpose_compute_overlap ) WRITE( io, 115 )
428	ELSEIF ( psolver == 'sor' ) THEN
429	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
430	ELSEIF ( psolver(1:9) == 'multigrid' ) THEN
431	WRITE ( io, 135 ) TRIM(psolver), cycle_mg, maximum_grid_level, ngsrb
432	IF ( mg_cycles == -1 ) THEN
433	WRITE ( io, 140 ) residual_limit
434	ELSE
435	WRITE ( io, 141 ) mg_cycles
436	ENDIF
437	IF ( mg_switch_to_pe0_level == 0 ) THEN
438	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
439	nzt_mg(1)
440	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
441	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
442	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
443	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
444	nzt_mg(mg_switch_to_pe0_level), &
445	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
446	nzt_mg(1)
447	ENDIF
448	IF ( masking_method ) WRITE ( io, 144 )
449	ENDIF
450	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
451	THEN
452	WRITE ( io, 142 )
453	ENDIF
454
455	IF ( momentum_advec == 'pw-scheme' ) THEN
456	WRITE ( io, 113 )
457	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
458	WRITE ( io, 503 )
459	ENDIF
460	IF ( scalar_advec == 'pw-scheme' ) THEN
461	WRITE ( io, 116 )
462	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
463	WRITE ( io, 504 )
464	ELSEIF ( scalar_advec == 'ws-scheme-mono' ) THEN
465	WRITE ( io, 513 )
466	ELSE
467	WRITE ( io, 118 )
468	ENDIF
469
470	WRITE ( io, 139 ) TRIM( loop_optimization )
471
472	IF ( galilei_transformation ) THEN
473	IF ( use_ug_for_galilei_tr ) THEN
474	char1 = '0.6 * geostrophic wind'
475	ELSE
476	char1 = 'mean wind in model domain'
477	ENDIF
478	IF ( simulated_time_at_begin == simulated_time ) THEN
479	char2 = 'at the start of the run'
480	ELSE
481	char2 = 'at the end of the run'
482	ENDIF
483	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
484	advected_distance_x/1000.0_wp, &
485	advected_distance_y/1000.0_wp
486	ENDIF
487	WRITE ( io, 122 ) timestep_scheme
488	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
489	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
490	IF ( .NOT. ocean ) THEN
491	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
492	rayleigh_damping_factor
493	ELSE
494	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
495	rayleigh_damping_factor
496	ENDIF
497	ENDIF
498	IF ( neutral ) WRITE ( io, 131 ) pt_surface
499	IF ( humidity ) THEN
500	IF ( .NOT. cloud_physics ) THEN
501	WRITE ( io, 129 )
502	ELSE
503	WRITE ( io, 130 )
504	ENDIF
505	ENDIF
506	IF ( passive_scalar ) WRITE ( io, 134 )
507	IF ( conserve_volume_flow ) THEN
508	WRITE ( io, 150 ) conserve_volume_flow_mode
509	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
510	WRITE ( io, 151 ) u_bulk, v_bulk
511	ENDIF
512	ELSEIF ( dp_external ) THEN
513	IF ( dp_smooth ) THEN
514	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
515	ELSE
516	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
517	ENDIF
518	ENDIF
519	WRITE ( io, 99 )
520
521	!
522	!-- Runtime and timestep information
523	WRITE ( io, 200 )
524	IF ( .NOT. dt_fixed ) THEN
525	WRITE ( io, 201 ) dt_max, cfl_factor
526	ELSE
527	WRITE ( io, 202 ) dt
528	ENDIF
529	WRITE ( io, 203 ) simulated_time_at_begin, end_time
530
531	IF ( time_restart /= 9999999.9_wp .AND. &
532	simulated_time_at_begin == simulated_time ) THEN
533	IF ( dt_restart == 9999999.9_wp ) THEN
534	WRITE ( io, 204 ) ' Restart at: ',time_restart
535	ELSE
536	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
537	ENDIF
538	ENDIF
539
540	IF ( simulated_time_at_begin /= simulated_time ) THEN
541	i = MAX ( log_point_s(10)%counts, 1 )
542	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
543	cpuseconds_per_simulated_second = 0.0_wp
544	ELSE
545	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
546	( simulated_time - &
547	simulated_time_at_begin )
548	ENDIF
549	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
550	log_point_s(10)%sum / REAL( i, KIND=wp ), &
551	cpuseconds_per_simulated_second
552	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
553	IF ( dt_restart == 9999999.9_wp ) THEN
554	WRITE ( io, 204 ) ' Next restart at: ',time_restart
555	ELSE
556	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
557	ENDIF
558	ENDIF
559	ENDIF
560
561
562	!
563	!-- Start time for coupled runs, if independent precursor runs for atmosphere
564	!-- and ocean are used or have been used. In this case, coupling_start_time
565	!-- defines the time when the coupling is switched on.
566	IF ( coupling_start_time /= 0.0_wp ) THEN
567	WRITE ( io, 207 ) coupling_start_time
568	ENDIF
569
570	!
571	!-- Computational grid
572	IF ( .NOT. ocean ) THEN
573	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
574	IF ( dz_stretch_level_index < nzt+1 ) THEN
575	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
576	dz_stretch_factor, dz_max
577	ENDIF
578	ELSE
579	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
580	IF ( dz_stretch_level_index > 0 ) THEN
581	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
582	dz_stretch_factor, dz_max
583	ENDIF
584	ENDIF
585	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
586	MIN( nnz+2, nzt+2 )
587	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
588
589	!
590	!-- Large scale forcing and nudging
591	WRITE ( io, 160 )
592	IF ( large_scale_forcing ) THEN
593	WRITE ( io, 162 )
594	WRITE ( io, 163 )
595
596	IF ( large_scale_subsidence ) THEN
597	IF ( .NOT. use_subsidence_tendencies ) THEN
598	WRITE ( io, 164 )
599	ELSE
600	WRITE ( io, 165 )
601	ENDIF
602	ENDIF
603
604	IF ( bc_pt_b == 'dirichlet' ) THEN
605	WRITE ( io, 180 )
606	ELSEIF ( bc_pt_b == 'neumann' ) THEN
607	WRITE ( io, 181 )
608	ENDIF
609
610	IF ( bc_q_b == 'dirichlet' ) THEN
611	WRITE ( io, 182 )
612	ELSEIF ( bc_q_b == 'neumann' ) THEN
613	WRITE ( io, 183 )
614	ENDIF
615
616	WRITE ( io, 167 )
617	IF ( nudging ) THEN
618	WRITE ( io, 170 )
619	ENDIF
620	ELSE
621	WRITE ( io, 161 )
622	WRITE ( io, 171 )
623	ENDIF
624	IF ( large_scale_subsidence ) THEN
625	WRITE ( io, 168 )
626	WRITE ( io, 169 )
627	ENDIF
628
629	!
630	!-- Profile for the large scale vertial velocity
631	!-- Building output strings, starting with surface value
632	IF ( large_scale_subsidence ) THEN
633	temperatures = ' 0.0'
634	gradients = '------'
635	slices = ' 0'
636	coordinates = ' 0.0'
637	i = 1
638	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
639
640	WRITE (coor_chr,'(E10.2,7X)') &
641	w_subs(subs_vertical_gradient_level_i(i))
642	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
643
644	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
645	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
646
647	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
648	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
649
650	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
651	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
652
653	IF ( i == 10 ) THEN
654	EXIT
655	ELSE
656	i = i + 1
657	ENDIF
658
659	ENDDO
660
661
662	IF ( .NOT. large_scale_forcing ) THEN
663	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
664	TRIM( gradients ), TRIM( slices )
665	ENDIF
666
667
668	ENDIF
669
670	!-- Profile of the geostrophic wind (component ug)
671	!-- Building output strings
672	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
673	gradients = '------'
674	slices = ' 0'
675	coordinates = ' 0.0'
676	i = 1
677	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
678
679	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
680	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
681
682	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
683	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
684
685	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
686	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
687
688	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
689	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
690
691	IF ( i == 10 ) THEN
692	EXIT
693	ELSE
694	i = i + 1
695	ENDIF
696
697	ENDDO
698
699	IF ( .NOT. large_scale_forcing ) THEN
700	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
701	TRIM( gradients ), TRIM( slices )
702	ENDIF
703
704	!-- Profile of the geostrophic wind (component vg)
705	!-- Building output strings
706	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
707	gradients = '------'
708	slices = ' 0'
709	coordinates = ' 0.0'
710	i = 1
711	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
712
713	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
714	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
715
716	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
717	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
718
719	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
720	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
721
722	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
723	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
724
725	IF ( i == 10 ) THEN
726	EXIT
727	ELSE
728	i = i + 1
729	ENDIF
730
731	ENDDO
732
733	IF ( .NOT. large_scale_forcing ) THEN
734	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
735	TRIM( gradients ), TRIM( slices )
736	ENDIF
737
738	!
739	!-- Topography
740	WRITE ( io, 270 ) topography
741	SELECT CASE ( TRIM( topography ) )
742
743	CASE ( 'flat' )
744	! no actions necessary
745
746	CASE ( 'single_building' )
747	blx = INT( building_length_x / dx )
748	bly = INT( building_length_y / dy )
749	bh = INT( building_height / dz )
750
751	IF ( building_wall_left == 9999999.9_wp ) THEN
752	building_wall_left = ( nx + 1 - blx ) / 2 * dx
753	ENDIF
754	bxl = INT ( building_wall_left / dx + 0.5_wp )
755	bxr = bxl + blx
756
757	IF ( building_wall_south == 9999999.9_wp ) THEN
758	building_wall_south = ( ny + 1 - bly ) / 2 * dy
759	ENDIF
760	bys = INT ( building_wall_south / dy + 0.5_wp )
761	byn = bys + bly
762
763	WRITE ( io, 271 ) building_length_x, building_length_y, &
764	building_height, bxl, bxr, bys, byn
765
766	CASE ( 'single_street_canyon' )
767	ch = NINT( canyon_height / dz )
768	IF ( canyon_width_x /= 9999999.9_wp ) THEN
769	!
770	!-- Street canyon in y direction
771	cwx = NINT( canyon_width_x / dx )
772	IF ( canyon_wall_left == 9999999.9_wp ) THEN
773	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
774	ENDIF
775	cxl = NINT( canyon_wall_left / dx )
776	cxr = cxl + cwx
777	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
778
779	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
780	!
781	!-- Street canyon in x direction
782	cwy = NINT( canyon_width_y / dy )
783	IF ( canyon_wall_south == 9999999.9_wp ) THEN
784	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
785	ENDIF
786	cys = NINT( canyon_wall_south / dy )
787	cyn = cys + cwy
788	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
789	ENDIF
790
791	END SELECT
792
793	IF ( TRIM( topography ) /= 'flat' ) THEN
794	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
795	IF ( TRIM( topography ) == 'single_building' .OR. &
796	TRIM( topography ) == 'single_street_canyon' ) THEN
797	WRITE ( io, 278 )
798	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
799	WRITE ( io, 279 )
800	ENDIF
801	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
802	WRITE ( io, 278 )
803	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
804	WRITE ( io, 279 )
805	ENDIF
806	ENDIF
807
808	IF ( plant_canopy ) THEN
809
810	canopy_height = pch_index * dz
811
812	WRITE ( io, 280 ) canopy_mode, canopy_height, pch_index, &
813	canopy_drag_coeff
814	IF ( passive_scalar ) THEN
815	WRITE ( io, 281 ) leaf_scalar_exch_coeff, &
816	leaf_surface_conc
817	ENDIF
818
819	!
820	!-- Heat flux at the top of vegetation
821	WRITE ( io, 282 ) cthf
822
823	!
824	!-- Leaf area density profile, calculated either from given vertical
825	!-- gradients or from beta probability density function.
826	IF ( .NOT. calc_beta_lad_profile ) THEN
827
828	!-- Building output strings, starting with surface value
829	WRITE ( leaf_area_density, '(F6.4)' ) lad_surface
830	gradients = '------'
831	slices = ' 0'
832	coordinates = ' 0.0'
833	i = 1
834	DO WHILE ( i < 11 .AND. lad_vertical_gradient_level_ind(i) /= -9999 )
835
836	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
837	leaf_area_density = TRIM( leaf_area_density ) // ' ' // TRIM( coor_chr )
838
839	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
840	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
841
842	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
843	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
844
845	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
846	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
847
848	i = i + 1
849	ENDDO
850
851	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
852	TRIM( gradients ), TRIM( slices )
853
854	ELSE
855
856	WRITE ( leaf_area_density, '(F6.4)' ) lad_surface
857	coordinates = ' 0.0'
858
859	DO k = 1, pch_index
860
861	WRITE (coor_chr,'(F7.2)') lad(k)
862	leaf_area_density = TRIM( leaf_area_density ) // ' ' // TRIM( coor_chr )
863
864	WRITE (coor_chr,'(F7.1)') zu(k)
865	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
866
867	ENDDO
868
869	WRITE ( io, 284 ) TRIM( coordinates ), TRIM( leaf_area_density ), alpha_lad, &
870	beta_lad, lai_beta
871
872	ENDIF
873
874	ENDIF
875
876
877	IF ( land_surface ) THEN
878
879	temperatures = ''
880	gradients = '' ! use for humidity here
881	coordinates = '' ! use for height
882	roots = '' ! use for root fraction
883	slices = '' ! use for index
884
885	i = 1
886	DO i = nzb_soil, nzt_soil
887	WRITE (coor_chr,'(F10.2,7X)') soil_temperature(i)
888	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
889
890	WRITE (coor_chr,'(F10.2,7X)') soil_moisture(i)
891	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
892
893	WRITE (coor_chr,'(F10.2,7X)') - zs(i)
894	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
895
896	WRITE (coor_chr,'(F10.2,7X)') root_fraction(i)
897	roots = TRIM( roots ) // ' ' // TRIM( coor_chr )
898
899	WRITE (coor_chr,'(I10,7X)') i
900	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
901
902
903	ENDDO
904
905	!
906	!-- Write land surface model header
907	WRITE( io, 419 )
908	IF ( conserve_water_content ) THEN
909	WRITE( io, 440 )
910	ELSE
911	WRITE( io, 441 )
912	ENDIF
913
914	IF ( dewfall ) THEN
915	WRITE( io, 442 )
916	ELSE
917	WRITE( io, 443 )
918	ENDIF
919
920	WRITE( io, 438 ) veg_type_name(veg_type), soil_type_name(soil_type)
921	WRITE( io, 439 ) TRIM( coordinates ), TRIM( temperatures ), &
922	TRIM( gradients ), TRIM( roots ), TRIM( slices )
923
924
925	ENDIF
926
927	IF ( radiation ) THEN
928	!
929	!-- Write land surface model header
930	WRITE( io, 444 )
931
932	IF ( radiation_scheme == "constant" ) THEN
933	WRITE( io, 445 ) net_radiation
934	ELSEIF ( radiation_scheme == "clear-sky" ) THEN
935	WRITE( io, 446 )
936	ELSE
937	WRITE( io, 447 ) radiation_scheme
938	ENDIF
939
940	WRITE( io, 448 ) albedo
941	WRITE( io, 449 ) dt_radiation
942
943	ENDIF
944
945
946	!
947	!-- Boundary conditions
948	IF ( ibc_p_b == 0 ) THEN
949	runten = 'p(0) = 0 \|'
950	ELSEIF ( ibc_p_b == 1 ) THEN
951	runten = 'p(0) = p(1) \|'
952	ENDIF
953	IF ( ibc_p_t == 0 ) THEN
954	roben = 'p(nzt+1) = 0 \|'
955	ELSE
956	roben = 'p(nzt+1) = p(nzt) \|'
957	ENDIF
958
959	IF ( ibc_uv_b == 0 ) THEN
960	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
961	ELSE
962	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
963	ENDIF
964	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
965	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
966	ELSEIF ( ibc_uv_t == 0 ) THEN
967	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
968	ELSE
969	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
970	ENDIF
971
972	IF ( ibc_pt_b == 0 ) THEN
973	IF ( land_surface ) THEN
974	runten = TRIM( runten ) // ' pt(0) = from soil model'
975	ELSE
976	runten = TRIM( runten ) // ' pt(0) = pt_surface'
977	ENDIF
978	ELSEIF ( ibc_pt_b == 1 ) THEN
979	runten = TRIM( runten ) // ' pt(0) = pt(1)'
980	ELSEIF ( ibc_pt_b == 2 ) THEN
981	runten = TRIM( runten ) // ' pt(0) = from coupled model'
982	ENDIF
983	IF ( ibc_pt_t == 0 ) THEN
984	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
985	ELSEIF( ibc_pt_t == 1 ) THEN
986	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
987	ELSEIF( ibc_pt_t == 2 ) THEN
988	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
989
990	ENDIF
991
992	WRITE ( io, 300 ) runten, roben
993
994	IF ( .NOT. constant_diffusion ) THEN
995	IF ( ibc_e_b == 1 ) THEN
996	runten = 'e(0) = e(1)'
997	ELSE
998	runten = 'e(0) = e(1) = (u/0.1)*2'
999	ENDIF
1000	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
1001
1002	WRITE ( io, 301 ) 'e', runten, roben
1003
1004	ENDIF
1005
1006	IF ( ocean ) THEN
1007	runten = 'sa(0) = sa(1)'
1008	IF ( ibc_sa_t == 0 ) THEN
1009	roben = 'sa(nzt+1) = sa_surface'
1010	ELSE
1011	roben = 'sa(nzt+1) = sa(nzt)'
1012	ENDIF
1013	WRITE ( io, 301 ) 'sa', runten, roben
1014	ENDIF
1015
1016	IF ( humidity ) THEN
1017	IF ( ibc_q_b == 0 ) THEN
1018	IF ( land_surface ) THEN
1019	runten = 'q(0) = from soil model'
1020	ELSE
1021	runten = 'q(0) = q_surface'
1022	ENDIF
1023
1024	ELSE
1025	runten = 'q(0) = q(1)'
1026	ENDIF
1027	IF ( ibc_q_t == 0 ) THEN
1028	roben = 'q(nzt) = q_top'
1029	ELSE
1030	roben = 'q(nzt) = q(nzt-1) + dq/dz'
1031	ENDIF
1032	WRITE ( io, 301 ) 'q', runten, roben
1033	ENDIF
1034
1035	IF ( passive_scalar ) THEN
1036	IF ( ibc_q_b == 0 ) THEN
1037	runten = 's(0) = s_surface'
1038	ELSE
1039	runten = 's(0) = s(1)'
1040	ENDIF
1041	IF ( ibc_q_t == 0 ) THEN
1042	roben = 's(nzt) = s_top'
1043	ELSE
1044	roben = 's(nzt) = s(nzt-1) + ds/dz'
1045	ENDIF
1046	WRITE ( io, 301 ) 's', runten, roben
1047	ENDIF
1048
1049	IF ( use_surface_fluxes ) THEN
1050	WRITE ( io, 303 )
1051	IF ( constant_heatflux ) THEN
1052	IF ( large_scale_forcing .AND. lsf_surf ) THEN
1053	WRITE ( io, 306 ) shf(0,0)
1054	ELSE
1055	WRITE ( io, 306 ) surface_heatflux
1056	ENDIF
1057	IF ( random_heatflux ) WRITE ( io, 307 )
1058	ENDIF
1059	IF ( humidity .AND. constant_waterflux ) THEN
1060	IF ( large_scale_forcing .AND. lsf_surf ) THEN
1061	WRITE ( io, 311 ) qsws(0,0)
1062	ELSE
1063	WRITE ( io, 311 ) surface_waterflux
1064	ENDIF
1065	ENDIF
1066	IF ( passive_scalar .AND. constant_waterflux ) THEN
1067	WRITE ( io, 313 ) surface_waterflux
1068	ENDIF
1069	ENDIF
1070
1071	IF ( use_top_fluxes ) THEN
1072	WRITE ( io, 304 )
1073	IF ( coupling_mode == 'uncoupled' ) THEN
1074	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
1075	IF ( constant_top_heatflux ) THEN
1076	WRITE ( io, 306 ) top_heatflux
1077	ENDIF
1078	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1079	WRITE ( io, 316 )
1080	ENDIF
1081	IF ( ocean .AND. constant_top_salinityflux ) THEN
1082	WRITE ( io, 309 ) top_salinityflux
1083	ENDIF
1084	IF ( humidity .OR. passive_scalar ) THEN
1085	WRITE ( io, 315 )
1086	ENDIF
1087	ENDIF
1088
1089	IF ( prandtl_layer ) THEN
1090	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
1091	z0h_factor*roughness_length, kappa, &
1092	rif_min, rif_max
1093	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
1094	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
1095	WRITE ( io, 312 )
1096	ENDIF
1097	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
1098	WRITE ( io, 314 )
1099	ENDIF
1100	ELSE
1101	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
1102	WRITE ( io, 310 ) rif_min, rif_max
1103	ENDIF
1104	ENDIF
1105
1106	WRITE ( io, 317 ) bc_lr, bc_ns
1107	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1108	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
1109	IF ( turbulent_inflow ) THEN
1110	IF ( .NOT. recycling_yshift ) THEN
1111	WRITE ( io, 319 ) recycling_width, recycling_plane, &
1112	inflow_damping_height, inflow_damping_width
1113	ELSE
1114	WRITE ( io, 322 ) recycling_width, recycling_plane, &
1115	inflow_damping_height, inflow_damping_width
1116	END IF
1117	ENDIF
1118	ENDIF
1119
1120	!
1121	!-- Initial Profiles
1122	WRITE ( io, 321 )
1123	!
1124	!-- Initial wind profiles
1125	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
1126
1127	!
1128	!-- Initial temperature profile
1129	!-- Building output strings, starting with surface temperature
1130	WRITE ( temperatures, '(F6.2)' ) pt_surface
1131	gradients = '------'
1132	slices = ' 0'
1133	coordinates = ' 0.0'
1134	i = 1
1135	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1136
1137	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1138	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1139
1140	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1141	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1142
1143	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1144	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1145
1146	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1147	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1148
1149	IF ( i == 10 ) THEN
1150	EXIT
1151	ELSE
1152	i = i + 1
1153	ENDIF
1154
1155	ENDDO
1156
1157	IF ( .NOT. nudging ) THEN
1158	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1159	TRIM( gradients ), TRIM( slices )
1160	ELSE
1161	WRITE ( io, 428 )
1162	ENDIF
1163
1164	!
1165	!-- Initial humidity profile
1166	!-- Building output strings, starting with surface humidity
1167	IF ( humidity .OR. passive_scalar ) THEN
1168	WRITE ( temperatures, '(E8.1)' ) q_surface
1169	gradients = '--------'
1170	slices = ' 0'
1171	coordinates = ' 0.0'
1172	i = 1
1173	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1174
1175	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1176	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1177
1178	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1179	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1180
1181	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1182	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1183
1184	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1185	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1186
1187	IF ( i == 10 ) THEN
1188	EXIT
1189	ELSE
1190	i = i + 1
1191	ENDIF
1192
1193	ENDDO
1194
1195	IF ( humidity ) THEN
1196	IF ( .NOT. nudging ) THEN
1197	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1198	TRIM( gradients ), TRIM( slices )
1199	ENDIF
1200	ELSE
1201	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1202	TRIM( gradients ), TRIM( slices )
1203	ENDIF
1204	ENDIF
1205
1206	!
1207	!-- Initial salinity profile
1208	!-- Building output strings, starting with surface salinity
1209	IF ( ocean ) THEN
1210	WRITE ( temperatures, '(F6.2)' ) sa_surface
1211	gradients = '------'
1212	slices = ' 0'
1213	coordinates = ' 0.0'
1214	i = 1
1215	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1216
1217	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1218	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1219
1220	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1221	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1222
1223	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1224	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1225
1226	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1227	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1228
1229	IF ( i == 10 ) THEN
1230	EXIT
1231	ELSE
1232	i = i + 1
1233	ENDIF
1234
1235	ENDDO
1236
1237	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1238	TRIM( gradients ), TRIM( slices )
1239	ENDIF
1240
1241
1242	!
1243	!-- Listing of 1D-profiles
1244	WRITE ( io, 325 ) dt_dopr_listing
1245	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1246	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1247	ENDIF
1248
1249	!
1250	!-- DATA output
1251	WRITE ( io, 330 )
1252	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1253	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1254	ENDIF
1255
1256	!
1257	!-- 1D-profiles
1258	dopr_chr = 'Profile:'
1259	IF ( dopr_n /= 0 ) THEN
1260	WRITE ( io, 331 )
1261
1262	output_format = ''
1263	output_format = output_format_netcdf
1264	WRITE ( io, 344 ) output_format
1265
1266	DO i = 1, dopr_n
1267	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
1268	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
1269	WRITE ( io, 332 ) dopr_chr
1270	dopr_chr = ' :'
1271	ENDIF
1272	ENDDO
1273
1274	IF ( dopr_chr /= '' ) THEN
1275	WRITE ( io, 332 ) dopr_chr
1276	ENDIF
1277	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
1278	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
1279	ENDIF
1280
1281	!
1282	!-- 2D-arrays
1283	DO av = 0, 1
1284
1285	i = 1
1286	do2d_xy = ''
1287	do2d_xz = ''
1288	do2d_yz = ''
1289	DO WHILE ( do2d(av,i) /= ' ' )
1290
1291	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
1292	do2d_mode = do2d(av,i)(l-1:l)
1293
1294	SELECT CASE ( do2d_mode )
1295	CASE ( 'xy' )
1296	ll = LEN_TRIM( do2d_xy )
1297	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1298	CASE ( 'xz' )
1299	ll = LEN_TRIM( do2d_xz )
1300	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1301	CASE ( 'yz' )
1302	ll = LEN_TRIM( do2d_yz )
1303	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1304	END SELECT
1305
1306	i = i + 1
1307
1308	ENDDO
1309
1310	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
1311	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
1312	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
1313
1314	IF ( av == 0 ) THEN
1315	WRITE ( io, 334 ) ''
1316	ELSE
1317	WRITE ( io, 334 ) '(time-averaged)'
1318	ENDIF
1319
1320	IF ( do2d_at_begin ) THEN
1321	begin_chr = 'and at the start'
1322	ELSE
1323	begin_chr = ''
1324	ENDIF
1325
1326	output_format = ''
1327	output_format = output_format_netcdf
1328	WRITE ( io, 344 ) output_format
1329
1330	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
1331	i = 1
1332	slices = '/'
1333	coordinates = '/'
1334	!
1335	!-- Building strings with index and coordinate information of the
1336	!-- slices
1337	DO WHILE ( section(i,1) /= -9999 )
1338
1339	WRITE (section_chr,'(I5)') section(i,1)
1340	section_chr = ADJUSTL( section_chr )
1341	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1342
1343	IF ( section(i,1) == -1 ) THEN
1344	WRITE (coor_chr,'(F10.1)') -1.0_wp
1345	ELSE
1346	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
1347	ENDIF
1348	coor_chr = ADJUSTL( coor_chr )
1349	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1350
1351	i = i + 1
1352	ENDDO
1353	IF ( av == 0 ) THEN
1354	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
1355	TRIM( begin_chr ), 'k', TRIM( slices ), &
1356	TRIM( coordinates )
1357	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
1358	WRITE ( io, 339 ) skip_time_do2d_xy
1359	ENDIF
1360	ELSE
1361	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
1362	TRIM( begin_chr ), averaging_interval, &
1363	dt_averaging_input, 'k', TRIM( slices ), &
1364	TRIM( coordinates )
1365	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1366	WRITE ( io, 339 ) skip_time_data_output_av
1367	ENDIF
1368	ENDIF
1369	IF ( netcdf_data_format > 4 ) THEN
1370	WRITE ( io, 352 ) ntdim_2d_xy(av)
1371	ELSE
1372	WRITE ( io, 353 )
1373	ENDIF
1374	ENDIF
1375
1376	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
1377	i = 1
1378	slices = '/'
1379	coordinates = '/'
1380	!
1381	!-- Building strings with index and coordinate information of the
1382	!-- slices
1383	DO WHILE ( section(i,2) /= -9999 )
1384
1385	WRITE (section_chr,'(I5)') section(i,2)
1386	section_chr = ADJUSTL( section_chr )
1387	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1388
1389	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
1390	coor_chr = ADJUSTL( coor_chr )
1391	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1392
1393	i = i + 1
1394	ENDDO
1395	IF ( av == 0 ) THEN
1396	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
1397	TRIM( begin_chr ), 'j', TRIM( slices ), &
1398	TRIM( coordinates )
1399	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
1400	WRITE ( io, 339 ) skip_time_do2d_xz
1401	ENDIF
1402	ELSE
1403	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
1404	TRIM( begin_chr ), averaging_interval, &
1405	dt_averaging_input, 'j', TRIM( slices ), &
1406	TRIM( coordinates )
1407	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1408	WRITE ( io, 339 ) skip_time_data_output_av
1409	ENDIF
1410	ENDIF
1411	IF ( netcdf_data_format > 4 ) THEN
1412	WRITE ( io, 352 ) ntdim_2d_xz(av)
1413	ELSE
1414	WRITE ( io, 353 )
1415	ENDIF
1416	ENDIF
1417
1418	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
1419	i = 1
1420	slices = '/'
1421	coordinates = '/'
1422	!
1423	!-- Building strings with index and coordinate information of the
1424	!-- slices
1425	DO WHILE ( section(i,3) /= -9999 )
1426
1427	WRITE (section_chr,'(I5)') section(i,3)
1428	section_chr = ADJUSTL( section_chr )
1429	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1430
1431	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
1432	coor_chr = ADJUSTL( coor_chr )
1433	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1434
1435	i = i + 1
1436	ENDDO
1437	IF ( av == 0 ) THEN
1438	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
1439	TRIM( begin_chr ), 'i', TRIM( slices ), &
1440	TRIM( coordinates )
1441	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
1442	WRITE ( io, 339 ) skip_time_do2d_yz
1443	ENDIF
1444	ELSE
1445	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
1446	TRIM( begin_chr ), averaging_interval, &
1447	dt_averaging_input, 'i', TRIM( slices ), &
1448	TRIM( coordinates )
1449	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1450	WRITE ( io, 339 ) skip_time_data_output_av
1451	ENDIF
1452	ENDIF
1453	IF ( netcdf_data_format > 4 ) THEN
1454	WRITE ( io, 352 ) ntdim_2d_yz(av)
1455	ELSE
1456	WRITE ( io, 353 )
1457	ENDIF
1458	ENDIF
1459
1460	ENDIF
1461
1462	ENDDO
1463
1464	!
1465	!-- 3d-arrays
1466	DO av = 0, 1
1467
1468	i = 1
1469	do3d_chr = ''
1470	DO WHILE ( do3d(av,i) /= ' ' )
1471
1472	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
1473	i = i + 1
1474
1475	ENDDO
1476
1477	IF ( do3d_chr /= '' ) THEN
1478	IF ( av == 0 ) THEN
1479	WRITE ( io, 336 ) ''
1480	ELSE
1481	WRITE ( io, 336 ) '(time-averaged)'
1482	ENDIF
1483
1484	output_format = output_format_netcdf
1485	WRITE ( io, 344 ) output_format
1486
1487	IF ( do3d_at_begin ) THEN
1488	begin_chr = 'and at the start'
1489	ELSE
1490	begin_chr = ''
1491	ENDIF
1492	IF ( av == 0 ) THEN
1493	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1494	zu(nz_do3d), nz_do3d
1495	ELSE
1496	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1497	TRIM( begin_chr ), averaging_interval, &
1498	dt_averaging_input, zu(nz_do3d), nz_do3d
1499	ENDIF
1500
1501	IF ( netcdf_data_format > 4 ) THEN
1502	WRITE ( io, 352 ) ntdim_3d(av)
1503	ELSE
1504	WRITE ( io, 353 )
1505	ENDIF
1506
1507	IF ( av == 0 ) THEN
1508	IF ( skip_time_do3d /= 0.0_wp ) THEN
1509	WRITE ( io, 339 ) skip_time_do3d
1510	ENDIF
1511	ELSE
1512	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1513	WRITE ( io, 339 ) skip_time_data_output_av
1514	ENDIF
1515	ENDIF
1516
1517	ENDIF
1518
1519	ENDDO
1520
1521	!
1522	!-- masked arrays
1523	IF ( masks > 0 ) WRITE ( io, 345 ) &
1524	mask_scale_x, mask_scale_y, mask_scale_z
1525	DO mid = 1, masks
1526	DO av = 0, 1
1527
1528	i = 1
1529	domask_chr = ''
1530	DO WHILE ( domask(mid,av,i) /= ' ' )
1531	domask_chr = TRIM( domask_chr ) // ' ' // &
1532	TRIM( domask(mid,av,i) ) // ','
1533	i = i + 1
1534	ENDDO
1535
1536	IF ( domask_chr /= '' ) THEN
1537	IF ( av == 0 ) THEN
1538	WRITE ( io, 346 ) '', mid
1539	ELSE
1540	WRITE ( io, 346 ) ' (time-averaged)', mid
1541	ENDIF
1542
1543	output_format = output_format_netcdf
1544	!-- Parallel output not implemented for mask data, hence
1545	!-- output_format must be adjusted.
1546	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
1547	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
1548	WRITE ( io, 344 ) output_format
1549
1550	IF ( av == 0 ) THEN
1551	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1552	ELSE
1553	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1554	averaging_interval, dt_averaging_input
1555	ENDIF
1556
1557	IF ( av == 0 ) THEN
1558	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
1559	WRITE ( io, 339 ) skip_time_domask(mid)
1560	ENDIF
1561	ELSE
1562	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1563	WRITE ( io, 339 ) skip_time_data_output_av
1564	ENDIF
1565	ENDIF
1566	!
1567	!-- output locations
1568	DO dim = 1, 3
1569	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
1570	count = 0
1571	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
1572	count = count + 1
1573	ENDDO
1574	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1575	mask(mid,dim,:count)
1576	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
1577	mask_loop(mid,dim,2) < 0.0_wp .AND. &
1578	mask_loop(mid,dim,3) == 0.0_wp ) THEN
1579	WRITE ( io, 350 ) dir(dim), dir(dim)
1580	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
1581	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1582	mask_loop(mid,dim,1:2)
1583	ELSE
1584	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1585	mask_loop(mid,dim,1:3)
1586	ENDIF
1587	ENDDO
1588	ENDIF
1589
1590	ENDDO
1591	ENDDO
1592
1593	!
1594	!-- Timeseries
1595	IF ( dt_dots /= 9999999.9_wp ) THEN
1596	WRITE ( io, 340 )
1597
1598	output_format = output_format_netcdf
1599	WRITE ( io, 344 ) output_format
1600	WRITE ( io, 341 ) dt_dots
1601	ENDIF
1602
1603	#if defined( __dvrp_graphics )
1604	!
1605	!-- Dvrp-output
1606	IF ( dt_dvrp /= 9999999.9_wp ) THEN
1607	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1608	TRIM( dvrp_username ), TRIM( dvrp_directory )
1609	i = 1
1610	l = 0
1611	m = 0
1612	DO WHILE ( mode_dvrp(i) /= ' ' )
1613	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1614	READ ( mode_dvrp(i), '(10X,I2)' ) j
1615	l = l + 1
1616	IF ( do3d(0,j) /= ' ' ) THEN
1617	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1618	isosurface_color(:,l)
1619	ENDIF
1620	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1621	READ ( mode_dvrp(i), '(6X,I2)' ) j
1622	m = m + 1
1623	IF ( do2d(0,j) /= ' ' ) THEN
1624	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1625	slicer_range_limits_dvrp(:,m)
1626	ENDIF
1627	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1628	WRITE ( io, 363 ) dvrp_psize
1629	IF ( particle_dvrpsize /= 'none' ) THEN
1630	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1631	dvrpsize_interval
1632	ENDIF
1633	IF ( particle_color /= 'none' ) THEN
1634	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1635	color_interval
1636	ENDIF
1637	ENDIF
1638	i = i + 1
1639	ENDDO
1640
1641	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1642	superelevation_y, superelevation, clip_dvrp_l, &
1643	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1644
1645	IF ( TRIM( topography ) /= 'flat' ) THEN
1646	WRITE ( io, 366 ) topography_color
1647	IF ( cluster_size > 1 ) THEN
1648	WRITE ( io, 367 ) cluster_size
1649	ENDIF
1650	ENDIF
1651
1652	ENDIF
1653	#endif
1654
1655	#if defined( __spectra )
1656	!
1657	!-- Spectra output
1658	IF ( dt_dosp /= 9999999.9_wp ) THEN
1659	WRITE ( io, 370 )
1660
1661	output_format = output_format_netcdf
1662	WRITE ( io, 344 ) output_format
1663	WRITE ( io, 371 ) dt_dosp
1664	IF ( skip_time_dosp /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dosp
1665	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1666	( spectra_direction(i), i = 1,10 ), &
1667	( comp_spectra_level(i), i = 1,100 ), &
1668	( plot_spectra_level(i), i = 1,100 ), &
1669	averaging_interval_sp, dt_averaging_input_pr
1670	ENDIF
1671	#endif
1672
1673	WRITE ( io, 99 )
1674
1675	!
1676	!-- Physical quantities
1677	WRITE ( io, 400 )
1678
1679	!
1680	!-- Geostrophic parameters
1681	IF ( radiation .AND. radiation_scheme /= 'constant' ) THEN
1682	WRITE ( io, 417 ) lambda
1683	ENDIF
1684	WRITE ( io, 410 ) phi, omega, f, fs
1685
1686	!
1687	!-- Other quantities
1688	WRITE ( io, 411 ) g
1689	IF ( radiation .AND. radiation_scheme /= 'constant' ) THEN
1690	WRITE ( io, 418 ) day_init, time_utc_init
1691	ENDIF
1692
1693	WRITE ( io, 412 ) TRIM( reference_state )
1694	IF ( use_single_reference_value ) THEN
1695	IF ( ocean ) THEN
1696	WRITE ( io, 413 ) prho_reference
1697	ELSE
1698	WRITE ( io, 414 ) pt_reference
1699	ENDIF
1700	ENDIF
1701
1702	!
1703	!-- Cloud physics parameters
1704	IF ( cloud_physics ) THEN
1705	WRITE ( io, 415 )
1706	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1707	IF ( icloud_scheme == 0 ) THEN
1708	WRITE ( io, 510 ) 1.0E-6_wp * nc_const
1709	IF ( precipitation ) WRITE ( io, 511 ) c_sedimentation
1710	ENDIF
1711	ENDIF
1712
1713	!
1714	!-- Cloud physcis parameters / quantities / numerical methods
1715	WRITE ( io, 430 )
1716	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1717	WRITE ( io, 431 )
1718	ELSEIF ( humidity .AND. cloud_physics ) THEN
1719	WRITE ( io, 432 )
1720	IF ( cloud_top_radiation ) WRITE ( io, 132 )
1721	IF ( icloud_scheme == 1 ) THEN
1722	IF ( precipitation ) WRITE ( io, 133 )
1723	ELSEIF ( icloud_scheme == 0 ) THEN
1724	IF ( drizzle ) WRITE ( io, 506 )
1725	IF ( precipitation ) THEN
1726	WRITE ( io, 505 )
1727	IF ( turbulence ) WRITE ( io, 507 )
1728	IF ( ventilation_effect ) WRITE ( io, 508 )
1729	IF ( limiter_sedimentation ) WRITE ( io, 509 )
1730	ENDIF
1731	ENDIF
1732	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1733	WRITE ( io, 433 )
1734	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1735	IF ( collision_kernel /= 'none' ) THEN
1736	WRITE ( io, 435 ) TRIM( collision_kernel )
1737	IF ( collision_kernel(6:9) == 'fast' ) THEN
1738	WRITE ( io, 436 ) radius_classes, dissipation_classes
1739	ENDIF
1740	ELSE
1741	WRITE ( io, 437 )
1742	ENDIF
1743	ENDIF
1744
1745	!
1746	!-- LES / turbulence parameters
1747	WRITE ( io, 450 )
1748
1749	!--
1750	! ... LES-constants used must still be added here
1751	!--
1752	IF ( constant_diffusion ) THEN
1753	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1754	prandtl_number
1755	ENDIF
1756	IF ( .NOT. constant_diffusion) THEN
1757	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
1758	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
1759	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1760	ENDIF
1761
1762	!
1763	!-- Special actions during the run
1764	WRITE ( io, 470 )
1765	IF ( create_disturbances ) THEN
1766	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1767	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1768	zu(disturbance_level_ind_t), disturbance_level_ind_t
1769	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1770	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1771	ELSE
1772	WRITE ( io, 473 ) disturbance_energy_limit
1773	ENDIF
1774	WRITE ( io, 474 ) TRIM( random_generator )
1775	ENDIF
1776	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
1777	WRITE ( io, 475 ) pt_surface_initial_change
1778	ENDIF
1779	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
1780	WRITE ( io, 476 ) q_surface_initial_change
1781	ENDIF
1782	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
1783	WRITE ( io, 477 ) q_surface_initial_change
1784	ENDIF
1785
1786	IF ( particle_advection ) THEN
1787	!
1788	!-- Particle attributes
1789	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1790	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1791	end_time_prel
1792	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1793	IF ( random_start_position ) WRITE ( io, 481 )
1794	IF ( seed_follows_topography ) WRITE ( io, 496 )
1795	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1796	WRITE ( io, 495 ) total_number_of_particles
1797	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1798	WRITE ( io, 483 ) maximum_number_of_tailpoints
1799	IF ( minimum_tailpoint_distance /= 0 ) THEN
1800	WRITE ( io, 484 ) total_number_of_tails, &
1801	minimum_tailpoint_distance, &
1802	maximum_tailpoint_age
1803	ENDIF
1804	ENDIF
1805	IF ( dt_write_particle_data /= 9999999.9_wp ) THEN
1806	WRITE ( io, 485 ) dt_write_particle_data
1807	IF ( netcdf_data_format > 1 ) THEN
1808	output_format = 'netcdf (64 bit offset) and binary'
1809	ELSE
1810	output_format = 'netcdf and binary'
1811	ENDIF
1812	WRITE ( io, 344 ) output_format
1813	ENDIF
1814	IF ( dt_dopts /= 9999999.9_wp ) WRITE ( io, 494 ) dt_dopts
1815	IF ( write_particle_statistics ) WRITE ( io, 486 )
1816
1817	WRITE ( io, 487 ) number_of_particle_groups
1818
1819	DO i = 1, number_of_particle_groups
1820	IF ( i == 1 .AND. density_ratio(i) == 9999999.9_wp ) THEN
1821	WRITE ( io, 490 ) i, 0.0_wp
1822	WRITE ( io, 492 )
1823	ELSE
1824	WRITE ( io, 490 ) i, radius(i)
1825	IF ( density_ratio(i) /= 0.0_wp ) THEN
1826	WRITE ( io, 491 ) density_ratio(i)
1827	ELSE
1828	WRITE ( io, 492 )
1829	ENDIF
1830	ENDIF
1831	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1832	pdx(i), pdy(i), pdz(i)
1833	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1834	ENDDO
1835
1836	ENDIF
1837
1838
1839	!
1840	!-- Parameters of 1D-model
1841	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1842	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1843	mixing_length_1d, dissipation_1d
1844	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1845	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1846	ENDIF
1847	ENDIF
1848
1849	!
1850	!-- User-defined information
1851	CALL user_header( io )
1852
1853	WRITE ( io, 99 )
1854
1855	!
1856	!-- Write buffer contents to disc immediately
1857	CALL local_flush( io )
1858
1859	!
1860	!-- Here the FORMATs start
1861
1862	99 FORMAT (1X,78('-'))
1863	100 FORMAT (/1X,'******************************',4X,44('-')/ &
1864	1X,'* ',A,' *',4X,A/ &
1865	1X,'******************************',4X,44('-'))
1866	101 FORMAT (35X,'coupled run using MPI-',I1,': ',A/ &
1867	35X,42('-'))
1868	102 FORMAT (/' Date: ',A8,4X,'Run: ',A20/ &
1869	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
1870	' Run on host: ',A10)
1871	#if defined( __parallel )
1872	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
1873	')',1X,A)
1874	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
1875	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
1876	105 FORMAT (35X,'One additional PE is used to handle'/37X,'the dvrp output!')
1877	106 FORMAT (35X,'A 1d-decomposition along x is forced'/ &
1878	35X,'because the job is running on an SMP-cluster')
1879	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
1880	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
1881	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
1882	35X,42('-'))
1883	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
1884	35X,'independent precursor runs'/ &
1885	35X,42('-'))
1886	117 FORMAT (' Accelerator boards / node: ',I2)
1887	#endif
1888	110 FORMAT (/' Numerical Schemes:'/ &
1889	' -----------------'/)
1890	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1891	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1892	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1893	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1894	' or Upstream')
1895	115 FORMAT (' FFT and transpositions are overlapping')
1896	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1897	' or Upstream')
1898	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1899	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1900	' translation velocity = ',A/ &
1901	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1902	120 FORMAT (' Accelerator boards: ',8X,I2)
1903	122 FORMAT (' --> Time differencing scheme: ',A)
1904	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1905	' maximum damping coefficient: ',F5.3, ' 1/s')
1906	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1907	130 FORMAT (' --> Additional prognostic equation for the total water content')
1908	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1909	F6.2, ' K assumed')
1910	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1911	' effective emissivity scheme')
1912	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1913	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1914	135 FORMAT (' --> Solve perturbation pressure via ',A,' method (', &
1915	A,'-cycle)'/ &
1916	' number of grid levels: ',I2/ &
1917	' Gauss-Seidel red/black iterations: ',I2)
1918	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1919	I3,')')
1920	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1921	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1922	I3,')'/ &
1923	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1924	I3,')')
1925	139 FORMAT (' --> Loop optimization method: ',A)
1926	140 FORMAT (' maximum residual allowed: ',E10.3)
1927	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1928	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1929	'step')
1930	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1931	'kinetic energy')
1932	144 FORMAT (' masking method is used')
1933	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1934	'conserved'/ &
1935	' using the ',A,' mode')
1936	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1937	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1938	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1939	/' starting from dp_level_b =', F8.3, 'm', A /)
1940	160 FORMAT (//' Large scale forcing and nudging:'/ &
1941	' -------------------------------'/)
1942	161 FORMAT (' --> No large scale forcing from external is used (default) ')
1943	162 FORMAT (' --> Large scale forcing from external file LSF_DATA is used: ')
1944	163 FORMAT (' - large scale advection tendencies ')
1945	164 FORMAT (' - large scale subsidence velocity w_subs ')
1946	165 FORMAT (' - large scale subsidence tendencies ')
1947	167 FORMAT (' - and geostrophic wind components ug and vg')
1948	168 FORMAT (' --> Large-scale vertical motion is used in the ', &
1949	'prognostic equation(s) for')
1950	169 FORMAT (' the scalar(s) only')
1951	170 FORMAT (' --> Nudging is used')
1952	171 FORMAT (' --> No nudging is used (default) ')
1953	180 FORMAT (' - prescribed surface values for temperature')
1954	181 FORMAT (' - prescribed surface fluxes for temperature')
1955	182 FORMAT (' - prescribed surface values for humidity')
1956	183 FORMAT (' - prescribed surface fluxes for humidity')
1957	200 FORMAT (//' Run time and time step information:'/ &
1958	' ----------------------------------'/)
1959	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1960	' CFL-factor: ',F4.2)
1961	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1962	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1963	' End time: ',F9.3,' s')
1964	204 FORMAT ( A,F9.3,' s')
1965	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1966	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1967	' CPU-time used: ',F9.3,' s per timestep: ', &
1968	' ',F9.3,' s'/ &
1969	' per second of simulated tim', &
1970	'e: ',F9.3,' s')
1971	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1972	250 FORMAT (//' Computational grid and domain size:'/ &
1973	' ----------------------------------'// &
1974	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1975	' m dz = ',F7.3,' m'/ &
1976	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1977	' m z(u) = ',F10.3,' m'/)
1978	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1979	' factor: ',F5.3/ &
1980	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1981	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1982	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1983	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1984	' degrees')
1985	270 FORMAT (//' Topography information:'/ &
1986	' ----------------------'// &
1987	1X,'Topography: ',A)
1988	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1989	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1990	' / ',I4)
1991	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1992	' direction' / &
1993	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1994	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1995	278 FORMAT (' Topography grid definition convention:'/ &
1996	' cell edge (staggered grid points'/ &
1997	' (u in x-direction, v in y-direction))' /)
1998	279 FORMAT (' Topography grid definition convention:'/ &
1999	' cell center (scalar grid points)' /)
2000	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
2001	' ------------------------------'// &
2002	' Canopy mode: ', A / &
2003	' Canopy height: ',F6.2,'m (',I4,' grid points)' / &
2004	' Leaf drag coefficient: ',F6.2 /)
2005	281 FORMAT (/ ' Scalar exchange coefficient: ',F6.2 / &
2006	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
2007	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
2008	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
2009	' Height: ',A,' m'/ &
2010	' Leaf area density: ',A,' m2/m3'/ &
2011	' Gradient: ',A,' m2/m4'/ &
2012	' Gridpoint: ',A)
2013	284 FORMAT (//' Characteristic levels of the leaf area density and coefficients:'// &
2014	' Height: ',A,' m'/ &
2015	' Leaf area density: ',A,' m2/m3'/ &
2016	' Coefficient alpha: ',F6.2 / &
2017	' Coefficient beta: ',F6.2 / &
2018	' Leaf area index: ',F6.2,' m2/m2' /)
2019
2020	300 FORMAT (//' Boundary conditions:'/ &
2021	' -------------------'// &
2022	' p uv ', &
2023	' pt'// &
2024	' B. bound.: ',A/ &
2025	' T. bound.: ',A)
2026	301 FORMAT (/' ',A// &
2027	' B. bound.: ',A/ &
2028	' T. bound.: ',A)
2029	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
2030	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
2031	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
2032	'computational u,v-level:'// &
2033	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
2034	' m kappa = ',F4.2/ &
2035	' Rif value range: ',F6.2,' <= rif <=',F6.2)
2036	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
2037	307 FORMAT (' Heatflux has a random normal distribution')
2038	308 FORMAT (' Predefined surface temperature')
2039	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
2040	310 FORMAT (//' 1D-Model:'// &
2041	' Rif value range: ',F6.2,' <= rif <=',F6.2)
2042	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
2043	312 FORMAT (' Predefined surface humidity')
2044	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
2045	314 FORMAT (' Predefined scalar value at the surface')
2046	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
2047	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
2048	'atmosphere model')
2049	317 FORMAT (//' Lateral boundaries:'/ &
2050	' left/right: ',A/ &
2051	' north/south: ',A)
2052	318 FORMAT (/' use_cmax: ',L1 / &
2053	' pt damping layer width = ',F8.2,' m, pt ', &
2054	'damping factor = ',F6.4)
2055	319 FORMAT (' turbulence recycling at inflow switched on'/ &
2056	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
2057	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
2058	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
2059	' v: ',F9.6,' m2/s2')
2060	321 FORMAT (//' Initial profiles:'/ &
2061	' ----------------')
2062	322 FORMAT (' turbulence recycling at inflow switched on'/ &
2063	' y shift of the recycled inflow turbulence switched on'/ &
2064	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
2065	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/q)
2066	325 FORMAT (//' List output:'/ &
2067	' -----------'// &
2068	' 1D-Profiles:'/ &
2069	' Output every ',F8.2,' s')
2070	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
2071	' Averaging input every ',F8.2,' s')
2072	330 FORMAT (//' Data output:'/ &
2073	' -----------'/)
2074	331 FORMAT (/' 1D-Profiles:')
2075	332 FORMAT (/' ',A)
2076	333 FORMAT (' Output every ',F8.2,' s',/ &
2077	' Time averaged over ',F8.2,' s'/ &
2078	' Averaging input every ',F8.2,' s')
2079	334 FORMAT (/' 2D-Arrays',A,':')
2080	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
2081	' Output every ',F8.2,' s ',A/ &
2082	' Cross sections at ',A1,' = ',A/ &
2083	' scalar-coordinates: ',A,' m'/)
2084	336 FORMAT (/' 3D-Arrays',A,':')
2085	337 FORMAT (/' Arrays: ',A/ &
2086	' Output every ',F8.2,' s ',A/ &
2087	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
2088	339 FORMAT (' No output during initial ',F8.2,' s')
2089	340 FORMAT (/' Time series:')
2090	341 FORMAT (' Output every ',F8.2,' s'/)
2091	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
2092	' Output every ',F8.2,' s ',A/ &
2093	' Time averaged over ',F8.2,' s'/ &
2094	' Averaging input every ',F8.2,' s'/ &
2095	' Cross sections at ',A1,' = ',A/ &
2096	' scalar-coordinates: ',A,' m'/)
2097	343 FORMAT (/' Arrays: ',A/ &
2098	' Output every ',F8.2,' s ',A/ &
2099	' Time averaged over ',F8.2,' s'/ &
2100	' Averaging input every ',F8.2,' s'/ &
2101	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
2102	344 FORMAT (' Output format: ',A/)
2103	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
2104	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
2105	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
2106	' mask_scale_z (in z-direction): ',F9.3, ' m' )
2107	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
2108	347 FORMAT (' Variables: ',A/ &
2109	' Output every ',F8.2,' s')
2110	348 FORMAT (' Variables: ',A/ &
2111	' Output every ',F8.2,' s'/ &
2112	' Time averaged over ',F8.2,' s'/ &
2113	' Averaging input every ',F8.2,' s')
2114	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
2115	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
2116	13(' ',8(F8.2,',')/) )
2117	350 FORMAT (/' Output locations in ',A,'-direction: ', &
2118	'all gridpoints along ',A,'-direction (default).' )
2119	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
2120	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
2121	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
2122	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
2123	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
2124	#if defined( __dvrp_graphics )
2125	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
2126	' Output every ',F7.1,' s'/ &
2127	' Output mode: ',A/ &
2128	' Host / User: ',A,' / ',A/ &
2129	' Directory: ',A// &
2130	' The sequence contains:')
2131	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
2132	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
2133	362 FORMAT (/' Slicer plane ',A/ &
2134	' Slicer limits: [',F6.2,',',F6.2,']')
2135	363 FORMAT (/' Particles'/ &
2136	' particle size: ',F7.2,' m')
2137	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
2138	F6.2,',',F6.2,']')
2139	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
2140	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
2141	')'/ &
2142	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
2143	' from y = ',F9.1,' m to y = ',F9.1,' m')
2144	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
2145	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
2146	#endif
2147	#if defined( __spectra )
2148	370 FORMAT (' Spectra:')
2149	371 FORMAT (' Output every ',F7.1,' s'/)
2150	372 FORMAT (' Arrays: ', 10(A5,',')/ &
2151	' Directions: ', 10(A5,',')/ &
2152	' height levels k = ', 20(I3,',')/ &
2153	' ', 20(I3,',')/ &
2154	' ', 20(I3,',')/ &
2155	' ', 20(I3,',')/ &
2156	' ', 19(I3,','),I3,'.'/ &
2157	' height levels selected for standard plot:'/ &
2158	' k = ', 20(I3,',')/ &
2159	' ', 20(I3,',')/ &
2160	' ', 20(I3,',')/ &
2161	' ', 20(I3,',')/ &
2162	' ', 19(I3,','),I3,'.'/ &
2163	' Time averaged over ', F7.1, ' s,' / &
2164	' Profiles for the time averaging are taken every ', &
2165	F6.1,' s')
2166	#endif
2167	400 FORMAT (//' Physical quantities:'/ &
2168	' -------------------'/)
2169	410 FORMAT (' Geograph. latitude : phi = ',F4.1,' degr'/ &
2170	' Angular velocity : omega = ',E9.3,' rad/s'/ &
2171	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
2172	' f* = ',F9.6,' 1/s')
2173	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
2174	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
2175	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
2176	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
2177	415 FORMAT (/' Cloud physics parameters:'/ &
2178	' ------------------------'/)
2179	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
2180	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
2181	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
2182	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
2183	' Vapourization heat : L_v = ',E8.2,' J/kg')
2184	417 FORMAT (' Geograph. longitude : lambda = ',F4.1,' degr')
2185	418 FORMAT (/' Day of the year at model start : day_init = ',I3 &
2186	/' UTC time at model start : time_utc_init = ',F7.1' s')
2187	419 FORMAT (//' Land surface model information:'/ &
2188	' ------------------------------'/)
2189	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
2190	' Height: ',A,' m'/ &
2191	' Temperature: ',A,' K'/ &
2192	' Gradient: ',A,' K/100m'/ &
2193	' Gridpoint: ',A)
2194	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
2195	' Height: ',A,' m'/ &
2196	' Humidity: ',A,' kg/kg'/ &
2197	' Gradient: ',A,' (kg/kg)/100m'/ &
2198	' Gridpoint: ',A)
2199	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
2200	' Height: ',A,' m'/ &
2201	' Scalar concentration: ',A,' kg/m**3'/ &
2202	' Gradient: ',A,' (kg/m**3)/100m'/ &
2203	' Gridpoint: ',A)
2204	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
2205	' Height: ',A,' m'/ &
2206	' ug: ',A,' m/s'/ &
2207	' Gradient: ',A,' 1/100s'/ &
2208	' Gridpoint: ',A)
2209	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
2210	' Height: ',A,' m'/ &
2211	' vg: ',A,' m/s'/ &
2212	' Gradient: ',A,' 1/100s'/ &
2213	' Gridpoint: ',A)
2214	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
2215	' Height: ',A,' m'/ &
2216	' Salinity: ',A,' psu'/ &
2217	' Gradient: ',A,' psu/100m'/ &
2218	' Gridpoint: ',A)
2219	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
2220	' Height: ',A,' m'/ &
2221	' w_subs: ',A,' m/s'/ &
2222	' Gradient: ',A,' (m/s)/100m'/ &
2223	' Gridpoint: ',A)
2224	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
2225	' profiles')
2226	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
2227	' NUDGING_DATA')
2228	430 FORMAT (//' Cloud physics quantities / methods:'/ &
2229	' ----------------------------------'/)
2230	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
2231	'on)')
2232	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
2233	' total water content is used.'/ &
2234	' Condensation is parameterized via 0% - or 100% scheme.')
2235	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
2236	'icle model')
2237	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
2238	' droplets < 1.0E-6 m')
2239	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
2240	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
2241	'are used'/ &
2242	' number of radius classes: ',I3,' interval ', &
2243	'[1.0E-6,2.0E-4] m'/ &
2244	' number of dissipation classes: ',I2,' interval ', &
2245	'[0,1000] cm2/s3')
2246	437 FORMAT (' Droplet collision is switched off')
2247	438 FORMAT (' --> Land surface type : ',A,/ &
2248	' --> Soil porosity type : ',A)
2249	439 FORMAT (/' Initial soil temperature and moisture profile:'// &
2250	' Height: ',A,' m'/ &
2251	' Temperature: ',A,' K'/ &
2252	' Moisture: ',A,' m3/m3'/ &
2253	' Root fraction: ',A,' '/ &
2254	' Gridpoint: ',A)
2255	440 FORMAT (/' --> Dewfall is allowed (default)')
2256	441 FORMAT (' --> Dewfall is inhibited')
2257	442 FORMAT (' --> Soil bottom is closed (water content is conserved, default)')
2258	443 FORMAT (' --> Soil bottom is open (water content is not conserved)')
2259	444 FORMAT (//' Radiation model information:'/ &
2260	' ----------------------------'/)
2261	445 FORMAT (' --> Using constant net radiation: net_radiation = ', F6.2, ' W/m**2')
2262	446 FORMAT (' --> Simple radiation scheme for clear sky is used (no clouds,', &
2263	' default)')
2264	447 FORMAT (' --> Radiation scheme:', A)
2265	448 FORMAT (/' Surface albedo: albedo = ', F5.3)
2266	449 FORMAT (' Timestep: dt_radiation = ', F5.2, ' s')
2267
2268	450 FORMAT (//' LES / Turbulence quantities:'/ &
2269	' ---------------------------'/)
2270	451 FORMAT (' Diffusion coefficients are constant:'/ &
2271	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
2272	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
2273	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
2274	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
2275	470 FORMAT (//' Actions during the simulation:'/ &
2276	' -----------------------------'/)
2277	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
2278	' Disturbance amplitude : ',F4.2, ' m/s'/ &
2279	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
2280	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
2281	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2282	' to i/j =',I4)
2283	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2284	1X,F5.3, ' m2/s2')
2285	474 FORMAT (' Random number generator used : ',A/)
2286	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2287	'respectively, if'/ &
2288	' the value is negative) by ',F5.2,' K at the beginning of the',&
2289	' 3D-simulation'/)
2290	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2291	'respectively, if the'/ &
2292	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2293	' the 3D-simulation'/)
2294	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2295	'respectively, if the'/ &
2296	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2297	' the 3D-simulation'/)
2298	480 FORMAT (' Particles:'/ &
2299	' ---------'// &
2300	' Particle advection is active (switched on at t = ', F7.1, &
2301	' s)'/ &
2302	' Start of new particle generations every ',F6.1,' s'/ &
2303	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2304	' bottom: ', A, ' top: ', A/&
2305	' Maximum particle age: ',F9.1,' s'/ &
2306	' Advection stopped at t = ',F9.1,' s'/)
2307	481 FORMAT (' Particles have random start positions'/)
2308	482 FORMAT (' Particles are advected only horizontally'/)
2309	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2310	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2311	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2312	' Maximum age of the end of the tail: ',F8.2,' s')
2313	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2314	486 FORMAT (' Particle statistics are written on file'/)
2315	487 FORMAT (' Number of particle groups: ',I2/)
2316	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2317	' minimum timestep for advection: ', F7.5/)
2318	489 FORMAT (' Number of particles simultaneously released at each ', &
2319	'point: ', I5/)
2320	490 FORMAT (' Particle group ',I2,':'/ &
2321	' Particle radius: ',E10.3, 'm')
2322	491 FORMAT (' Particle inertia is activated'/ &
2323	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2324	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2325	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2326	' y:',F8.1,' - ',F8.1,' m'/&
2327	' z:',F8.1,' - ',F8.1,' m'/&
2328	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2329	' m dz = ',F8.1,' m'/)
2330	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2331	F8.2,' s'/)
2332	495 FORMAT (' Number of particles in total domain: ',I10/)
2333	496 FORMAT (' Initial vertical particle positions are interpreted ', &
2334	'as relative to the given topography')
2335	500 FORMAT (//' 1D-Model parameters:'/ &
2336	' -------------------'// &
2337	' Simulation time: ',F8.1,' s'/ &
2338	' Run-controll output every: ',F8.1,' s'/ &
2339	' Vertical profile output every: ',F8.1,' s'/ &
2340	' Mixing length calculation: ',A/ &
2341	' Dissipation calculation: ',A/)
2342	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2343	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2344	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2345	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
2346	506 FORMAT (' Drizzle parameterization via Stokes law')
2347	507 FORMAT (' Turbulence effects on precipitation process')
2348	508 FORMAT (' Ventilation effects on evaporation of rain drops')
2349	509 FORMAT (' Slope limiter used for sedimentation process')
2350	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
2351	511 FORMAT (' Sedimentation Courant number: '/&
2352	' C_s = ',F3.1,' ')
2353	512 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
2354	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
2355	' Run on host: ',A10,6X,'En-No.: ',I2.2)
2356	513 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order ' // &
2357	'+ monotonic adjustment')
2358
2359
2360	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |