Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1568

Last change on this file since 1568 was 1561, checked in by keck, 10 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 90.3 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2014 Leibniz Universitaet Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1561 2015-03-06 11:00:41Z suehring $
27	!
28	! 1560 2015-03-06 10:48:54Z keck
29	! output for recycling y shift
30	!
31	! 1557 2015-03-05 16:43:04Z suehring
32	! output for monotonic limiter
33	!
34	! 1551 2015-03-03 14:18:16Z maronga
35	! Added informal output for land surface model and radiation model. Removed typo.
36	!
37	! 1496 2014-12-02 17:25:50Z maronga
38	! Renamed: "radiation -> "cloud_top_radiation"
39	!
40	! 1484 2014-10-21 10:53:05Z kanani
41	! Changes due to new module structure of the plant canopy model:
42	! module plant_canopy_model_mod and output for new canopy model parameters
43	! (alpha_lad, beta_lad, lai_beta,...) added,
44	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
45	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff,
46	! learde renamed leaf_area_density.
47	! Bugfix: DO-WHILE-loop for lad header information additionally restricted
48	! by maximum number of gradient levels (currently 10)
49	!
50	! 1482 2014-10-18 12:34:45Z raasch
51	! information about calculated or predefined virtual processor topology adjusted
52	!
53	! 1468 2014-09-24 14:06:57Z maronga
54	! Adapted for use on up to 6-digit processor cores
55	!
56	! 1429 2014-07-15 12:53:45Z knoop
57	! header exended to provide ensemble_member_nr if specified
58	!
59	! 1376 2014-04-26 11:21:22Z boeske
60	! Correction of typos
61	!
62	! 1365 2014-04-22 15:03:56Z boeske
63	! New section 'Large scale forcing and nudging':
64	! output of large scale forcing and nudging information,
65	! new section for initial profiles created
66	!
67	! 1359 2014-04-11 17:15:14Z hoffmann
68	! dt_sort_particles removed
69	!
70	! 1353 2014-04-08 15:21:23Z heinze
71	! REAL constants provided with KIND-attribute
72	!
73	! 1327 2014-03-21 11:00:16Z raasch
74	! parts concerning iso2d and avs output removed,
75	! -netcdf output queries
76	!
77	! 1324 2014-03-21 09:13:16Z suehring
78	! Bugfix: module spectrum added
79	!
80	! 1322 2014-03-20 16:38:49Z raasch
81	! REAL functions provided with KIND-attribute,
82	! some REAL constants defined as wp-kind
83	!
84	! 1320 2014-03-20 08:40:49Z raasch
85	! ONLY-attribute added to USE-statements,
86	! kind-parameters added to all INTEGER and REAL declaration statements,
87	! kinds are defined in new module kinds,
88	! revision history before 2012 removed,
89	! comment fields (!:) to be used for variable explanations added to
90	! all variable declaration statements
91	!
92	! 1308 2014-03-13 14:58:42Z fricke
93	! output of the fixed number of output time levels
94	! output_format adjusted for masked data if netcdf_data_format > 5
95	!
96	! 1299 2014-03-06 13:15:21Z heinze
97	! output for using large_scale subsidence in combination
98	! with large_scale_forcing
99	! reformatting, more detailed explanations
100	!
101	! 1241 2013-10-30 11:36:58Z heinze
102	! output for nudging + large scale forcing from external file
103	!
104	! 1216 2013-08-26 09:31:42Z raasch
105	! output for transpose_compute_overlap
106	!
107	! 1212 2013-08-15 08:46:27Z raasch
108	! output for poisfft_hybrid removed
109	!
110	! 1179 2013-06-14 05:57:58Z raasch
111	! output of reference_state, use_reference renamed use_single_reference_value
112	!
113	! 1159 2013-05-21 11:58:22Z fricke
114	! +use_cmax
115	!
116	! 1115 2013-03-26 18:16:16Z hoffmann
117	! descriptions for Seifert-Beheng-cloud-physics-scheme added
118	!
119	! 1111 2013-03-08 23:54:10Z raasch
120	! output of accelerator board information
121	! ibc_p_b = 2 removed
122	!
123	! 1108 2013-03-05 07:03:32Z raasch
124	! bugfix for r1106
125	!
126	! 1106 2013-03-04 05:31:38Z raasch
127	! some format changes for coupled runs
128	!
129	! 1092 2013-02-02 11:24:22Z raasch
130	! unused variables removed
131	!
132	! 1036 2012-10-22 13:43:42Z raasch
133	! code put under GPL (PALM 3.9)
134	!
135	! 1031 2012-10-19 14:35:30Z raasch
136	! output of netCDF data format modified
137	!
138	! 1015 2012-09-27 09:23:24Z raasch
139	! output of Adjustment of mixing length to the Prandtl mixing length at first
140	! grid point above ground removed
141	!
142	! 1003 2012-09-14 14:35:53Z raasch
143	! output of information about equal/unequal subdomain size removed
144	!
145	! 1001 2012-09-13 14:08:46Z raasch
146	! all actions concerning leapfrog- and upstream-spline-scheme removed
147	!
148	! 978 2012-08-09 08:28:32Z fricke
149	! -km_damp_max, outflow_damping_width
150	! +pt_damping_factor, pt_damping_width
151	! +z0h
152	!
153	! 964 2012-07-26 09:14:24Z raasch
154	! output of profil-related quantities removed
155	!
156	! 940 2012-07-09 14:31:00Z raasch
157	! Output in case of simulations for pure neutral stratification (no pt-equation
158	! solved)
159	!
160	! 927 2012-06-06 19:15:04Z raasch
161	! output of masking_method for mg-solver
162	!
163	! 868 2012-03-28 12:21:07Z raasch
164	! translation velocity in Galilean transformation changed to 0.6 * ug
165	!
166	! 833 2012-02-22 08:55:55Z maronga
167	! Adjusted format for leaf area density
168	!
169	! 828 2012-02-21 12:00:36Z raasch
170	! output of dissipation_classes + radius_classes
171	!
172	! 825 2012-02-19 03:03:44Z raasch
173	! Output of cloud physics parameters/quantities complemented and restructured
174	!
175	! Revision 1.1 1997/08/11 06:17:20 raasch
176	! Initial revision
177	!
178	!
179	! Description:
180	! ------------
181	! Writing a header with all important information about the actual run.
182	! This subroutine is called three times, two times at the beginning
183	! (writing information on files RUN_CONTROL and HEADER) and one time at the
184	! end of the run, then writing additional information about CPU-usage on file
185	! header.
186	!-----------------------------------------------------------------------------!
187
188	USE arrays_3d, &
189	ONLY: pt_init, qsws, q_init, sa_init, shf, ug, vg, w_subs, zu
190
191	USE control_parameters
192
193	USE cloud_parameters, &
194	ONLY: cp, curvature_solution_effects, c_sedimentation, &
195	limiter_sedimentation, l_v, nc_const, r_d, ventilation_effect
196
197	USE cpulog, &
198	ONLY: log_point_s
199
200	USE dvrp_variables, &
201	ONLY: use_seperate_pe_for_dvrp_output
202
203	USE grid_variables, &
204	ONLY: dx, dy
205
206	USE indices, &
207	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
208	nys_mg, nzt, nzt_mg
209
210	USE kinds
211
212	USE land_surface_model_mod, &
213	ONLY: conserve_water_content, dewfall, land_surface, nzb_soil, &
214	nzt_soil, root_fraction, soil_moisture, soil_temperature, &
215	soil_type, soil_type_name, veg_type, veg_type_name, zs
216
217	USE model_1d, &
218	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
219
220	USE particle_attributes, &
221	ONLY: bc_par_b, bc_par_lr, bc_par_ns, bc_par_t, collision_kernel, &
222	density_ratio, dissipation_classes, dt_min_part, dt_prel, &
223	dt_write_particle_data, end_time_prel, &
224	maximum_number_of_tailpoints, maximum_tailpoint_age, &
225	minimum_tailpoint_distance, number_of_particle_groups, &
226	particle_advection, particle_advection_start, &
227	particles_per_point, pdx, pdy, pdz, psb, psl, psn, psr, pss, &
228	pst, radius, radius_classes, random_start_position, &
229	total_number_of_particles, use_particle_tails, &
230	use_sgs_for_particles, total_number_of_tails, &
231	vertical_particle_advection, write_particle_statistics
232
233	USE pegrid
234
235	USE plant_canopy_model_mod, &
236	ONLY: alpha_lad, beta_lad, calc_beta_lad_profile, canopy_drag_coeff, &
237	canopy_mode, cthf, lad, lad_surface, lad_vertical_gradient, &
238	lad_vertical_gradient_level, lad_vertical_gradient_level_ind, &
239	lai_beta, leaf_scalar_exch_coeff, leaf_surface_conc, pch_index, &
240	plant_canopy
241
242	USE radiation_model_mod, &
243	ONLY: albedo, day_init, dt_radiation, lambda, net_radiation, &
244	radiation, radiation_scheme, time_utc_init
245
246	USE spectrum, &
247	ONLY: comp_spectra_level, data_output_sp, plot_spectra_level, &
248	spectra_direction
249
250	IMPLICIT NONE
251
252	CHARACTER (LEN=1) :: prec !:
253
254	CHARACTER (LEN=2) :: do2d_mode !:
255
256	CHARACTER (LEN=5) :: section_chr !:
257
258	CHARACTER (LEN=10) :: coor_chr !:
259	CHARACTER (LEN=10) :: host_chr !:
260
261	CHARACTER (LEN=16) :: begin_chr !:
262
263	CHARACTER (LEN=26) :: ver_rev !:
264
265	CHARACTER (LEN=40) :: output_format !:
266
267	CHARACTER (LEN=70) :: char1 !:
268	CHARACTER (LEN=70) :: char2 !:
269	CHARACTER (LEN=70) :: dopr_chr !:
270	CHARACTER (LEN=70) :: do2d_xy !:
271	CHARACTER (LEN=70) :: do2d_xz !:
272	CHARACTER (LEN=70) :: do2d_yz !:
273	CHARACTER (LEN=70) :: do3d_chr !:
274	CHARACTER (LEN=70) :: domask_chr !:
275	CHARACTER (LEN=70) :: run_classification !:
276
277	CHARACTER (LEN=85) :: roben !:
278	CHARACTER (LEN=85) :: runten !:
279
280	CHARACTER (LEN=86) :: coordinates !:
281	CHARACTER (LEN=86) :: gradients !:
282	CHARACTER (LEN=86) :: leaf_area_density !:
283	CHARACTER (LEN=86) :: roots !:
284	CHARACTER (LEN=86) :: slices !:
285	CHARACTER (LEN=86) :: temperatures !:
286	CHARACTER (LEN=86) :: ugcomponent !:
287	CHARACTER (LEN=86) :: vgcomponent !:
288
289	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !:
290
291	INTEGER(iwp) :: av !:
292	INTEGER(iwp) :: bh !:
293	INTEGER(iwp) :: blx !:
294	INTEGER(iwp) :: bly !:
295	INTEGER(iwp) :: bxl !:
296	INTEGER(iwp) :: bxr !:
297	INTEGER(iwp) :: byn !:
298	INTEGER(iwp) :: bys !:
299	INTEGER(iwp) :: ch !:
300	INTEGER(iwp) :: count !:
301	INTEGER(iwp) :: cwx !:
302	INTEGER(iwp) :: cwy !:
303	INTEGER(iwp) :: cxl !:
304	INTEGER(iwp) :: cxr !:
305	INTEGER(iwp) :: cyn !:
306	INTEGER(iwp) :: cys !:
307	INTEGER(iwp) :: dim !:
308	INTEGER(iwp) :: i !:
309	INTEGER(iwp) :: io !:
310	INTEGER(iwp) :: j !:
311	INTEGER(iwp) :: k !:
312	INTEGER(iwp) :: l !:
313	INTEGER(iwp) :: ll !:
314	INTEGER(iwp) :: mpi_type !:
315
316	REAL(wp) :: canopy_height !: canopy height (in m)
317	REAL(wp) :: cpuseconds_per_simulated_second !:
318
319	!
320	!-- Open the output file. At the end of the simulation, output is directed
321	!-- to unit 19.
322	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
323	.NOT. simulated_time_at_begin /= simulated_time ) THEN
324	io = 15 ! header output on file RUN_CONTROL
325	ELSE
326	io = 19 ! header output on file HEADER
327	ENDIF
328	CALL check_open( io )
329
330	!
331	!-- At the end of the run, output file (HEADER) will be rewritten with
332	!-- new information
333	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
334
335	!
336	!-- Determine kind of model run
337	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
338	run_classification = '3D - restart run'
339	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
340	run_classification = '3D - run with cyclic fill of 3D - prerun data'
341	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
342	run_classification = '3D - run without 1D - prerun'
343	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
344	run_classification = '3D - run with 1D - prerun'
345	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
346	run_classification = '3D - run initialized by user'
347	ELSE
348	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
349	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
350	ENDIF
351	IF ( ocean ) THEN
352	run_classification = 'ocean - ' // run_classification
353	ELSE
354	run_classification = 'atmosphere - ' // run_classification
355	ENDIF
356
357	!
358	!-- Run-identification, date, time, host
359	host_chr = host(1:10)
360	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
361	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
362	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
363	#if defined( __mpi2 )
364	mpi_type = 2
365	#else
366	mpi_type = 1
367	#endif
368	WRITE ( io, 101 ) mpi_type, coupling_mode
369	ENDIF
370	#if defined( __parallel )
371	IF ( coupling_start_time /= 0.0_wp ) THEN
372	IF ( coupling_start_time > simulated_time_at_begin ) THEN
373	WRITE ( io, 109 )
374	ELSE
375	WRITE ( io, 114 )
376	ENDIF
377	ENDIF
378	#endif
379	IF ( ensemble_member_nr /= 0 ) THEN
380	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
381	ADJUSTR( host_chr ), ensemble_member_nr
382	ELSE
383	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
384	ADJUSTR( host_chr )
385	ENDIF
386	#if defined( __parallel )
387	IF ( npex == -1 .AND. npey == -1 ) THEN
388	char1 = 'calculated'
389	ELSE
390	char1 = 'predefined'
391	ENDIF
392	IF ( threads_per_task == 1 ) THEN
393	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
394	ELSE
395	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
396	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
397	ENDIF
398	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
399	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
400	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
401	npex == -1 .AND. pdims(2) == 1 ) &
402	THEN
403	WRITE ( io, 106 )
404	ELSEIF ( pdims(2) == 1 ) THEN
405	WRITE ( io, 107 ) 'x'
406	ELSEIF ( pdims(1) == 1 ) THEN
407	WRITE ( io, 107 ) 'y'
408	ENDIF
409	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
410	IF ( numprocs /= maximum_parallel_io_streams ) THEN
411	WRITE ( io, 108 ) maximum_parallel_io_streams
412	ENDIF
413	#else
414	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
415	#endif
416	WRITE ( io, 99 )
417
418	!
419	!-- Numerical schemes
420	WRITE ( io, 110 )
421	IF ( psolver(1:7) == 'poisfft' ) THEN
422	WRITE ( io, 111 ) TRIM( fft_method )
423	IF ( transpose_compute_overlap ) WRITE( io, 115 )
424	ELSEIF ( psolver == 'sor' ) THEN
425	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
426	ELSEIF ( psolver == 'multigrid' ) THEN
427	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
428	IF ( mg_cycles == -1 ) THEN
429	WRITE ( io, 140 ) residual_limit
430	ELSE
431	WRITE ( io, 141 ) mg_cycles
432	ENDIF
433	IF ( mg_switch_to_pe0_level == 0 ) THEN
434	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
435	nzt_mg(1)
436	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
437	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
438	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
439	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
440	nzt_mg(mg_switch_to_pe0_level), &
441	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
442	nzt_mg(1)
443	ENDIF
444	IF ( masking_method ) WRITE ( io, 144 )
445	ENDIF
446	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
447	THEN
448	WRITE ( io, 142 )
449	ENDIF
450
451	IF ( momentum_advec == 'pw-scheme' ) THEN
452	WRITE ( io, 113 )
453	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
454	WRITE ( io, 503 )
455	ENDIF
456	IF ( scalar_advec == 'pw-scheme' ) THEN
457	WRITE ( io, 116 )
458	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
459	WRITE ( io, 504 )
460	ELSEIF ( scalar_advec == 'ws-scheme-mono' ) THEN
461	WRITE ( io, 513 )
462	ELSE
463	WRITE ( io, 118 )
464	ENDIF
465
466	WRITE ( io, 139 ) TRIM( loop_optimization )
467
468	IF ( galilei_transformation ) THEN
469	IF ( use_ug_for_galilei_tr ) THEN
470	char1 = '0.6 * geostrophic wind'
471	ELSE
472	char1 = 'mean wind in model domain'
473	ENDIF
474	IF ( simulated_time_at_begin == simulated_time ) THEN
475	char2 = 'at the start of the run'
476	ELSE
477	char2 = 'at the end of the run'
478	ENDIF
479	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
480	advected_distance_x/1000.0_wp, &
481	advected_distance_y/1000.0_wp
482	ENDIF
483	WRITE ( io, 122 ) timestep_scheme
484	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
485	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
486	IF ( .NOT. ocean ) THEN
487	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
488	rayleigh_damping_factor
489	ELSE
490	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
491	rayleigh_damping_factor
492	ENDIF
493	ENDIF
494	IF ( neutral ) WRITE ( io, 131 ) pt_surface
495	IF ( humidity ) THEN
496	IF ( .NOT. cloud_physics ) THEN
497	WRITE ( io, 129 )
498	ELSE
499	WRITE ( io, 130 )
500	ENDIF
501	ENDIF
502	IF ( passive_scalar ) WRITE ( io, 134 )
503	IF ( conserve_volume_flow ) THEN
504	WRITE ( io, 150 ) conserve_volume_flow_mode
505	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
506	WRITE ( io, 151 ) u_bulk, v_bulk
507	ENDIF
508	ELSEIF ( dp_external ) THEN
509	IF ( dp_smooth ) THEN
510	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
511	ELSE
512	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
513	ENDIF
514	ENDIF
515	WRITE ( io, 99 )
516
517	!
518	!-- Runtime and timestep information
519	WRITE ( io, 200 )
520	IF ( .NOT. dt_fixed ) THEN
521	WRITE ( io, 201 ) dt_max, cfl_factor
522	ELSE
523	WRITE ( io, 202 ) dt
524	ENDIF
525	WRITE ( io, 203 ) simulated_time_at_begin, end_time
526
527	IF ( time_restart /= 9999999.9_wp .AND. &
528	simulated_time_at_begin == simulated_time ) THEN
529	IF ( dt_restart == 9999999.9_wp ) THEN
530	WRITE ( io, 204 ) ' Restart at: ',time_restart
531	ELSE
532	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
533	ENDIF
534	ENDIF
535
536	IF ( simulated_time_at_begin /= simulated_time ) THEN
537	i = MAX ( log_point_s(10)%counts, 1 )
538	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
539	cpuseconds_per_simulated_second = 0.0_wp
540	ELSE
541	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
542	( simulated_time - &
543	simulated_time_at_begin )
544	ENDIF
545	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
546	log_point_s(10)%sum / REAL( i, KIND=wp ), &
547	cpuseconds_per_simulated_second
548	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
549	IF ( dt_restart == 9999999.9_wp ) THEN
550	WRITE ( io, 204 ) ' Next restart at: ',time_restart
551	ELSE
552	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
553	ENDIF
554	ENDIF
555	ENDIF
556
557
558	!
559	!-- Start time for coupled runs, if independent precursor runs for atmosphere
560	!-- and ocean are used or have been used. In this case, coupling_start_time
561	!-- defines the time when the coupling is switched on.
562	IF ( coupling_start_time /= 0.0_wp ) THEN
563	WRITE ( io, 207 ) coupling_start_time
564	ENDIF
565
566	!
567	!-- Computational grid
568	IF ( .NOT. ocean ) THEN
569	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
570	IF ( dz_stretch_level_index < nzt+1 ) THEN
571	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
572	dz_stretch_factor, dz_max
573	ENDIF
574	ELSE
575	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
576	IF ( dz_stretch_level_index > 0 ) THEN
577	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
578	dz_stretch_factor, dz_max
579	ENDIF
580	ENDIF
581	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
582	MIN( nnz+2, nzt+2 )
583	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
584
585	!
586	!-- Large scale forcing and nudging
587	WRITE ( io, 160 )
588	IF ( large_scale_forcing ) THEN
589	WRITE ( io, 162 )
590	WRITE ( io, 163 )
591
592	IF ( large_scale_subsidence ) THEN
593	IF ( .NOT. use_subsidence_tendencies ) THEN
594	WRITE ( io, 164 )
595	ELSE
596	WRITE ( io, 165 )
597	ENDIF
598	ENDIF
599
600	IF ( bc_pt_b == 'dirichlet' ) THEN
601	WRITE ( io, 180 )
602	ELSEIF ( bc_pt_b == 'neumann' ) THEN
603	WRITE ( io, 181 )
604	ENDIF
605
606	IF ( bc_q_b == 'dirichlet' ) THEN
607	WRITE ( io, 182 )
608	ELSEIF ( bc_q_b == 'neumann' ) THEN
609	WRITE ( io, 183 )
610	ENDIF
611
612	WRITE ( io, 167 )
613	IF ( nudging ) THEN
614	WRITE ( io, 170 )
615	ENDIF
616	ELSE
617	WRITE ( io, 161 )
618	WRITE ( io, 171 )
619	ENDIF
620	IF ( large_scale_subsidence ) THEN
621	WRITE ( io, 168 )
622	WRITE ( io, 169 )
623	ENDIF
624
625	!
626	!-- Profile for the large scale vertial velocity
627	!-- Building output strings, starting with surface value
628	IF ( large_scale_subsidence ) THEN
629	temperatures = ' 0.0'
630	gradients = '------'
631	slices = ' 0'
632	coordinates = ' 0.0'
633	i = 1
634	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
635
636	WRITE (coor_chr,'(E10.2,7X)') &
637	w_subs(subs_vertical_gradient_level_i(i))
638	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
639
640	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
641	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
642
643	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
644	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
645
646	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
647	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
648
649	IF ( i == 10 ) THEN
650	EXIT
651	ELSE
652	i = i + 1
653	ENDIF
654
655	ENDDO
656
657
658	IF ( .NOT. large_scale_forcing ) THEN
659	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
660	TRIM( gradients ), TRIM( slices )
661	ENDIF
662
663
664	ENDIF
665
666	!-- Profile of the geostrophic wind (component ug)
667	!-- Building output strings
668	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
669	gradients = '------'
670	slices = ' 0'
671	coordinates = ' 0.0'
672	i = 1
673	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
674
675	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
676	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
677
678	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
679	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
680
681	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
682	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
683
684	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
685	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
686
687	IF ( i == 10 ) THEN
688	EXIT
689	ELSE
690	i = i + 1
691	ENDIF
692
693	ENDDO
694
695	IF ( .NOT. large_scale_forcing ) THEN
696	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
697	TRIM( gradients ), TRIM( slices )
698	ENDIF
699
700	!-- Profile of the geostrophic wind (component vg)
701	!-- Building output strings
702	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
703	gradients = '------'
704	slices = ' 0'
705	coordinates = ' 0.0'
706	i = 1
707	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
708
709	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
710	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
711
712	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
713	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
714
715	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
716	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
717
718	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
719	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
720
721	IF ( i == 10 ) THEN
722	EXIT
723	ELSE
724	i = i + 1
725	ENDIF
726
727	ENDDO
728
729	IF ( .NOT. large_scale_forcing ) THEN
730	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
731	TRIM( gradients ), TRIM( slices )
732	ENDIF
733
734	!
735	!-- Topography
736	WRITE ( io, 270 ) topography
737	SELECT CASE ( TRIM( topography ) )
738
739	CASE ( 'flat' )
740	! no actions necessary
741
742	CASE ( 'single_building' )
743	blx = INT( building_length_x / dx )
744	bly = INT( building_length_y / dy )
745	bh = INT( building_height / dz )
746
747	IF ( building_wall_left == 9999999.9_wp ) THEN
748	building_wall_left = ( nx + 1 - blx ) / 2 * dx
749	ENDIF
750	bxl = INT ( building_wall_left / dx + 0.5_wp )
751	bxr = bxl + blx
752
753	IF ( building_wall_south == 9999999.9_wp ) THEN
754	building_wall_south = ( ny + 1 - bly ) / 2 * dy
755	ENDIF
756	bys = INT ( building_wall_south / dy + 0.5_wp )
757	byn = bys + bly
758
759	WRITE ( io, 271 ) building_length_x, building_length_y, &
760	building_height, bxl, bxr, bys, byn
761
762	CASE ( 'single_street_canyon' )
763	ch = NINT( canyon_height / dz )
764	IF ( canyon_width_x /= 9999999.9_wp ) THEN
765	!
766	!-- Street canyon in y direction
767	cwx = NINT( canyon_width_x / dx )
768	IF ( canyon_wall_left == 9999999.9_wp ) THEN
769	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
770	ENDIF
771	cxl = NINT( canyon_wall_left / dx )
772	cxr = cxl + cwx
773	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
774
775	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
776	!
777	!-- Street canyon in x direction
778	cwy = NINT( canyon_width_y / dy )
779	IF ( canyon_wall_south == 9999999.9_wp ) THEN
780	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
781	ENDIF
782	cys = NINT( canyon_wall_south / dy )
783	cyn = cys + cwy
784	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
785	ENDIF
786
787	END SELECT
788
789	IF ( TRIM( topography ) /= 'flat' ) THEN
790	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
791	IF ( TRIM( topography ) == 'single_building' .OR. &
792	TRIM( topography ) == 'single_street_canyon' ) THEN
793	WRITE ( io, 278 )
794	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
795	WRITE ( io, 279 )
796	ENDIF
797	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
798	WRITE ( io, 278 )
799	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
800	WRITE ( io, 279 )
801	ENDIF
802	ENDIF
803
804	IF ( plant_canopy ) THEN
805
806	canopy_height = pch_index * dz
807
808	WRITE ( io, 280 ) canopy_mode, canopy_height, pch_index, &
809	canopy_drag_coeff
810	IF ( passive_scalar ) THEN
811	WRITE ( io, 281 ) leaf_scalar_exch_coeff, &
812	leaf_surface_conc
813	ENDIF
814
815	!
816	!-- Heat flux at the top of vegetation
817	WRITE ( io, 282 ) cthf
818
819	!
820	!-- Leaf area density profile, calculated either from given vertical
821	!-- gradients or from beta probability density function.
822	IF ( .NOT. calc_beta_lad_profile ) THEN
823
824	!-- Building output strings, starting with surface value
825	WRITE ( leaf_area_density, '(F6.4)' ) lad_surface
826	gradients = '------'
827	slices = ' 0'
828	coordinates = ' 0.0'
829	i = 1
830	DO WHILE ( i < 11 .AND. lad_vertical_gradient_level_ind(i) /= -9999 )
831
832	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
833	leaf_area_density = TRIM( leaf_area_density ) // ' ' // TRIM( coor_chr )
834
835	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
836	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
837
838	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
839	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
840
841	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
842	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
843
844	i = i + 1
845	ENDDO
846
847	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
848	TRIM( gradients ), TRIM( slices )
849
850	ELSE
851
852	WRITE ( leaf_area_density, '(F6.4)' ) lad_surface
853	coordinates = ' 0.0'
854
855	DO k = 1, pch_index
856
857	WRITE (coor_chr,'(F7.2)') lad(k)
858	leaf_area_density = TRIM( leaf_area_density ) // ' ' // TRIM( coor_chr )
859
860	WRITE (coor_chr,'(F7.1)') zu(k)
861	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
862
863	ENDDO
864
865	WRITE ( io, 284 ) TRIM( coordinates ), TRIM( leaf_area_density ), alpha_lad, &
866	beta_lad, lai_beta
867
868	ENDIF
869
870	ENDIF
871
872
873	IF ( land_surface ) THEN
874
875	temperatures = ''
876	gradients = '' ! use for humidity here
877	coordinates = '' ! use for height
878	roots = '' ! use for root fraction
879	slices = '' ! use for index
880
881	i = 1
882	DO i = nzb_soil, nzt_soil
883	WRITE (coor_chr,'(F10.2,7X)') soil_temperature(i)
884	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
885
886	WRITE (coor_chr,'(F10.2,7X)') soil_moisture(i)
887	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
888
889	WRITE (coor_chr,'(F10.2,7X)') - zs(i)
890	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
891
892	WRITE (coor_chr,'(F10.2,7X)') root_fraction(i)
893	roots = TRIM( roots ) // ' ' // TRIM( coor_chr )
894
895	WRITE (coor_chr,'(I10,7X)') i
896	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
897
898
899	ENDDO
900
901	!
902	!-- Write land surface model header
903	WRITE( io, 419 )
904	IF ( conserve_water_content ) THEN
905	WRITE( io, 440 )
906	ELSE
907	WRITE( io, 441 )
908	ENDIF
909
910	IF ( dewfall ) THEN
911	WRITE( io, 442 )
912	ELSE
913	WRITE( io, 443 )
914	ENDIF
915
916	WRITE( io, 438 ) veg_type_name(veg_type), soil_type_name(soil_type)
917	WRITE( io, 439 ) TRIM( coordinates ), TRIM( temperatures ), &
918	TRIM( gradients ), TRIM( roots ), TRIM( slices )
919
920
921	ENDIF
922
923	IF ( radiation ) THEN
924	!
925	!-- Write land surface model header
926	WRITE( io, 444 )
927
928	IF ( radiation_scheme == "constant" ) THEN
929	WRITE( io, 445 ) net_radiation
930	ELSEIF ( radiation_scheme == "clear-sky" ) THEN
931	WRITE( io, 446 )
932	ELSE
933	WRITE( io, 447 ) radiation_scheme
934	ENDIF
935
936	WRITE( io, 448 ) albedo
937	WRITE( io, 449 ) dt_radiation
938
939	ENDIF
940
941
942	!
943	!-- Boundary conditions
944	IF ( ibc_p_b == 0 ) THEN
945	runten = 'p(0) = 0 \|'
946	ELSEIF ( ibc_p_b == 1 ) THEN
947	runten = 'p(0) = p(1) \|'
948	ENDIF
949	IF ( ibc_p_t == 0 ) THEN
950	roben = 'p(nzt+1) = 0 \|'
951	ELSE
952	roben = 'p(nzt+1) = p(nzt) \|'
953	ENDIF
954
955	IF ( ibc_uv_b == 0 ) THEN
956	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
957	ELSE
958	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
959	ENDIF
960	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
961	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
962	ELSEIF ( ibc_uv_t == 0 ) THEN
963	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
964	ELSE
965	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
966	ENDIF
967
968	IF ( ibc_pt_b == 0 ) THEN
969	IF ( land_surface ) THEN
970	runten = TRIM( runten ) // ' pt(0) = from soil model'
971	ELSE
972	runten = TRIM( runten ) // ' pt(0) = pt_surface'
973	ENDIF
974	ELSEIF ( ibc_pt_b == 1 ) THEN
975	runten = TRIM( runten ) // ' pt(0) = pt(1)'
976	ELSEIF ( ibc_pt_b == 2 ) THEN
977	runten = TRIM( runten ) // ' pt(0) = from coupled model'
978	ENDIF
979	IF ( ibc_pt_t == 0 ) THEN
980	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
981	ELSEIF( ibc_pt_t == 1 ) THEN
982	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
983	ELSEIF( ibc_pt_t == 2 ) THEN
984	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
985
986	ENDIF
987
988	WRITE ( io, 300 ) runten, roben
989
990	IF ( .NOT. constant_diffusion ) THEN
991	IF ( ibc_e_b == 1 ) THEN
992	runten = 'e(0) = e(1)'
993	ELSE
994	runten = 'e(0) = e(1) = (u/0.1)*2'
995	ENDIF
996	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
997
998	WRITE ( io, 301 ) 'e', runten, roben
999
1000	ENDIF
1001
1002	IF ( ocean ) THEN
1003	runten = 'sa(0) = sa(1)'
1004	IF ( ibc_sa_t == 0 ) THEN
1005	roben = 'sa(nzt+1) = sa_surface'
1006	ELSE
1007	roben = 'sa(nzt+1) = sa(nzt)'
1008	ENDIF
1009	WRITE ( io, 301 ) 'sa', runten, roben
1010	ENDIF
1011
1012	IF ( humidity ) THEN
1013	IF ( ibc_q_b == 0 ) THEN
1014	IF ( land_surface ) THEN
1015	runten = 'q(0) = from soil model'
1016	ELSE
1017	runten = 'q(0) = q_surface'
1018	ENDIF
1019
1020	ELSE
1021	runten = 'q(0) = q(1)'
1022	ENDIF
1023	IF ( ibc_q_t == 0 ) THEN
1024	roben = 'q(nzt) = q_top'
1025	ELSE
1026	roben = 'q(nzt) = q(nzt-1) + dq/dz'
1027	ENDIF
1028	WRITE ( io, 301 ) 'q', runten, roben
1029	ENDIF
1030
1031	IF ( passive_scalar ) THEN
1032	IF ( ibc_q_b == 0 ) THEN
1033	runten = 's(0) = s_surface'
1034	ELSE
1035	runten = 's(0) = s(1)'
1036	ENDIF
1037	IF ( ibc_q_t == 0 ) THEN
1038	roben = 's(nzt) = s_top'
1039	ELSE
1040	roben = 's(nzt) = s(nzt-1) + ds/dz'
1041	ENDIF
1042	WRITE ( io, 301 ) 's', runten, roben
1043	ENDIF
1044
1045	IF ( use_surface_fluxes ) THEN
1046	WRITE ( io, 303 )
1047	IF ( constant_heatflux ) THEN
1048	IF ( large_scale_forcing .AND. lsf_surf ) THEN
1049	WRITE ( io, 306 ) shf(0,0)
1050	ELSE
1051	WRITE ( io, 306 ) surface_heatflux
1052	ENDIF
1053	IF ( random_heatflux ) WRITE ( io, 307 )
1054	ENDIF
1055	IF ( humidity .AND. constant_waterflux ) THEN
1056	IF ( large_scale_forcing .AND. lsf_surf ) THEN
1057	WRITE ( io, 311 ) qsws(0,0)
1058	ELSE
1059	WRITE ( io, 311 ) surface_waterflux
1060	ENDIF
1061	ENDIF
1062	IF ( passive_scalar .AND. constant_waterflux ) THEN
1063	WRITE ( io, 313 ) surface_waterflux
1064	ENDIF
1065	ENDIF
1066
1067	IF ( use_top_fluxes ) THEN
1068	WRITE ( io, 304 )
1069	IF ( coupling_mode == 'uncoupled' ) THEN
1070	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
1071	IF ( constant_top_heatflux ) THEN
1072	WRITE ( io, 306 ) top_heatflux
1073	ENDIF
1074	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
1075	WRITE ( io, 316 )
1076	ENDIF
1077	IF ( ocean .AND. constant_top_salinityflux ) THEN
1078	WRITE ( io, 309 ) top_salinityflux
1079	ENDIF
1080	IF ( humidity .OR. passive_scalar ) THEN
1081	WRITE ( io, 315 )
1082	ENDIF
1083	ENDIF
1084
1085	IF ( prandtl_layer ) THEN
1086	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
1087	z0h_factor*roughness_length, kappa, &
1088	rif_min, rif_max
1089	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
1090	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
1091	WRITE ( io, 312 )
1092	ENDIF
1093	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
1094	WRITE ( io, 314 )
1095	ENDIF
1096	ELSE
1097	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
1098	WRITE ( io, 310 ) rif_min, rif_max
1099	ENDIF
1100	ENDIF
1101
1102	WRITE ( io, 317 ) bc_lr, bc_ns
1103	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1104	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
1105	IF ( turbulent_inflow ) THEN
1106	IF ( .NOT. recycling_yshift ) THEN
1107	WRITE ( io, 319 ) recycling_width, recycling_plane, &
1108	inflow_damping_height, inflow_damping_width
1109	ELSE
1110	WRITE ( io, 322 ) recycling_width, recycling_plane, &
1111	inflow_damping_height, inflow_damping_width
1112	END IF
1113	ENDIF
1114	ENDIF
1115
1116	!
1117	!-- Initial Profiles
1118	WRITE ( io, 321 )
1119	!
1120	!-- Initial wind profiles
1121	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
1122
1123	!
1124	!-- Initial temperature profile
1125	!-- Building output strings, starting with surface temperature
1126	WRITE ( temperatures, '(F6.2)' ) pt_surface
1127	gradients = '------'
1128	slices = ' 0'
1129	coordinates = ' 0.0'
1130	i = 1
1131	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1132
1133	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1134	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1135
1136	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1137	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1138
1139	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1140	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1141
1142	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1143	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1144
1145	IF ( i == 10 ) THEN
1146	EXIT
1147	ELSE
1148	i = i + 1
1149	ENDIF
1150
1151	ENDDO
1152
1153	IF ( .NOT. nudging ) THEN
1154	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1155	TRIM( gradients ), TRIM( slices )
1156	ELSE
1157	WRITE ( io, 428 )
1158	ENDIF
1159
1160	!
1161	!-- Initial humidity profile
1162	!-- Building output strings, starting with surface humidity
1163	IF ( humidity .OR. passive_scalar ) THEN
1164	WRITE ( temperatures, '(E8.1)' ) q_surface
1165	gradients = '--------'
1166	slices = ' 0'
1167	coordinates = ' 0.0'
1168	i = 1
1169	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1170
1171	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1172	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1173
1174	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1175	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1176
1177	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1178	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1179
1180	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1181	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1182
1183	IF ( i == 10 ) THEN
1184	EXIT
1185	ELSE
1186	i = i + 1
1187	ENDIF
1188
1189	ENDDO
1190
1191	IF ( humidity ) THEN
1192	IF ( .NOT. nudging ) THEN
1193	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1194	TRIM( gradients ), TRIM( slices )
1195	ENDIF
1196	ELSE
1197	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1198	TRIM( gradients ), TRIM( slices )
1199	ENDIF
1200	ENDIF
1201
1202	!
1203	!-- Initial salinity profile
1204	!-- Building output strings, starting with surface salinity
1205	IF ( ocean ) THEN
1206	WRITE ( temperatures, '(F6.2)' ) sa_surface
1207	gradients = '------'
1208	slices = ' 0'
1209	coordinates = ' 0.0'
1210	i = 1
1211	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1212
1213	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1214	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1215
1216	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1217	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1218
1219	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1220	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1221
1222	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1223	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1224
1225	IF ( i == 10 ) THEN
1226	EXIT
1227	ELSE
1228	i = i + 1
1229	ENDIF
1230
1231	ENDDO
1232
1233	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1234	TRIM( gradients ), TRIM( slices )
1235	ENDIF
1236
1237
1238	!
1239	!-- Listing of 1D-profiles
1240	WRITE ( io, 325 ) dt_dopr_listing
1241	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1242	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1243	ENDIF
1244
1245	!
1246	!-- DATA output
1247	WRITE ( io, 330 )
1248	IF ( averaging_interval_pr /= 0.0_wp ) THEN
1249	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
1250	ENDIF
1251
1252	!
1253	!-- 1D-profiles
1254	dopr_chr = 'Profile:'
1255	IF ( dopr_n /= 0 ) THEN
1256	WRITE ( io, 331 )
1257
1258	output_format = ''
1259	output_format = output_format_netcdf
1260	WRITE ( io, 344 ) output_format
1261
1262	DO i = 1, dopr_n
1263	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
1264	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
1265	WRITE ( io, 332 ) dopr_chr
1266	dopr_chr = ' :'
1267	ENDIF
1268	ENDDO
1269
1270	IF ( dopr_chr /= '' ) THEN
1271	WRITE ( io, 332 ) dopr_chr
1272	ENDIF
1273	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
1274	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
1275	ENDIF
1276
1277	!
1278	!-- 2D-arrays
1279	DO av = 0, 1
1280
1281	i = 1
1282	do2d_xy = ''
1283	do2d_xz = ''
1284	do2d_yz = ''
1285	DO WHILE ( do2d(av,i) /= ' ' )
1286
1287	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
1288	do2d_mode = do2d(av,i)(l-1:l)
1289
1290	SELECT CASE ( do2d_mode )
1291	CASE ( 'xy' )
1292	ll = LEN_TRIM( do2d_xy )
1293	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1294	CASE ( 'xz' )
1295	ll = LEN_TRIM( do2d_xz )
1296	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1297	CASE ( 'yz' )
1298	ll = LEN_TRIM( do2d_yz )
1299	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
1300	END SELECT
1301
1302	i = i + 1
1303
1304	ENDDO
1305
1306	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
1307	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
1308	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
1309
1310	IF ( av == 0 ) THEN
1311	WRITE ( io, 334 ) ''
1312	ELSE
1313	WRITE ( io, 334 ) '(time-averaged)'
1314	ENDIF
1315
1316	IF ( do2d_at_begin ) THEN
1317	begin_chr = 'and at the start'
1318	ELSE
1319	begin_chr = ''
1320	ENDIF
1321
1322	output_format = ''
1323	output_format = output_format_netcdf
1324	WRITE ( io, 344 ) output_format
1325
1326	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
1327	i = 1
1328	slices = '/'
1329	coordinates = '/'
1330	!
1331	!-- Building strings with index and coordinate information of the
1332	!-- slices
1333	DO WHILE ( section(i,1) /= -9999 )
1334
1335	WRITE (section_chr,'(I5)') section(i,1)
1336	section_chr = ADJUSTL( section_chr )
1337	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1338
1339	IF ( section(i,1) == -1 ) THEN
1340	WRITE (coor_chr,'(F10.1)') -1.0_wp
1341	ELSE
1342	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
1343	ENDIF
1344	coor_chr = ADJUSTL( coor_chr )
1345	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1346
1347	i = i + 1
1348	ENDDO
1349	IF ( av == 0 ) THEN
1350	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
1351	TRIM( begin_chr ), 'k', TRIM( slices ), &
1352	TRIM( coordinates )
1353	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
1354	WRITE ( io, 339 ) skip_time_do2d_xy
1355	ENDIF
1356	ELSE
1357	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
1358	TRIM( begin_chr ), averaging_interval, &
1359	dt_averaging_input, 'k', TRIM( slices ), &
1360	TRIM( coordinates )
1361	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1362	WRITE ( io, 339 ) skip_time_data_output_av
1363	ENDIF
1364	ENDIF
1365	IF ( netcdf_data_format > 4 ) THEN
1366	WRITE ( io, 352 ) ntdim_2d_xy(av)
1367	ELSE
1368	WRITE ( io, 353 )
1369	ENDIF
1370	ENDIF
1371
1372	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
1373	i = 1
1374	slices = '/'
1375	coordinates = '/'
1376	!
1377	!-- Building strings with index and coordinate information of the
1378	!-- slices
1379	DO WHILE ( section(i,2) /= -9999 )
1380
1381	WRITE (section_chr,'(I5)') section(i,2)
1382	section_chr = ADJUSTL( section_chr )
1383	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1384
1385	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
1386	coor_chr = ADJUSTL( coor_chr )
1387	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1388
1389	i = i + 1
1390	ENDDO
1391	IF ( av == 0 ) THEN
1392	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
1393	TRIM( begin_chr ), 'j', TRIM( slices ), &
1394	TRIM( coordinates )
1395	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
1396	WRITE ( io, 339 ) skip_time_do2d_xz
1397	ENDIF
1398	ELSE
1399	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
1400	TRIM( begin_chr ), averaging_interval, &
1401	dt_averaging_input, 'j', TRIM( slices ), &
1402	TRIM( coordinates )
1403	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1404	WRITE ( io, 339 ) skip_time_data_output_av
1405	ENDIF
1406	ENDIF
1407	IF ( netcdf_data_format > 4 ) THEN
1408	WRITE ( io, 352 ) ntdim_2d_xz(av)
1409	ELSE
1410	WRITE ( io, 353 )
1411	ENDIF
1412	ENDIF
1413
1414	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
1415	i = 1
1416	slices = '/'
1417	coordinates = '/'
1418	!
1419	!-- Building strings with index and coordinate information of the
1420	!-- slices
1421	DO WHILE ( section(i,3) /= -9999 )
1422
1423	WRITE (section_chr,'(I5)') section(i,3)
1424	section_chr = ADJUSTL( section_chr )
1425	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
1426
1427	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
1428	coor_chr = ADJUSTL( coor_chr )
1429	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
1430
1431	i = i + 1
1432	ENDDO
1433	IF ( av == 0 ) THEN
1434	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
1435	TRIM( begin_chr ), 'i', TRIM( slices ), &
1436	TRIM( coordinates )
1437	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
1438	WRITE ( io, 339 ) skip_time_do2d_yz
1439	ENDIF
1440	ELSE
1441	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
1442	TRIM( begin_chr ), averaging_interval, &
1443	dt_averaging_input, 'i', TRIM( slices ), &
1444	TRIM( coordinates )
1445	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1446	WRITE ( io, 339 ) skip_time_data_output_av
1447	ENDIF
1448	ENDIF
1449	IF ( netcdf_data_format > 4 ) THEN
1450	WRITE ( io, 352 ) ntdim_2d_yz(av)
1451	ELSE
1452	WRITE ( io, 353 )
1453	ENDIF
1454	ENDIF
1455
1456	ENDIF
1457
1458	ENDDO
1459
1460	!
1461	!-- 3d-arrays
1462	DO av = 0, 1
1463
1464	i = 1
1465	do3d_chr = ''
1466	DO WHILE ( do3d(av,i) /= ' ' )
1467
1468	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
1469	i = i + 1
1470
1471	ENDDO
1472
1473	IF ( do3d_chr /= '' ) THEN
1474	IF ( av == 0 ) THEN
1475	WRITE ( io, 336 ) ''
1476	ELSE
1477	WRITE ( io, 336 ) '(time-averaged)'
1478	ENDIF
1479
1480	output_format = output_format_netcdf
1481	WRITE ( io, 344 ) output_format
1482
1483	IF ( do3d_at_begin ) THEN
1484	begin_chr = 'and at the start'
1485	ELSE
1486	begin_chr = ''
1487	ENDIF
1488	IF ( av == 0 ) THEN
1489	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1490	zu(nz_do3d), nz_do3d
1491	ELSE
1492	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1493	TRIM( begin_chr ), averaging_interval, &
1494	dt_averaging_input, zu(nz_do3d), nz_do3d
1495	ENDIF
1496
1497	IF ( netcdf_data_format > 4 ) THEN
1498	WRITE ( io, 352 ) ntdim_3d(av)
1499	ELSE
1500	WRITE ( io, 353 )
1501	ENDIF
1502
1503	IF ( av == 0 ) THEN
1504	IF ( skip_time_do3d /= 0.0_wp ) THEN
1505	WRITE ( io, 339 ) skip_time_do3d
1506	ENDIF
1507	ELSE
1508	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1509	WRITE ( io, 339 ) skip_time_data_output_av
1510	ENDIF
1511	ENDIF
1512
1513	ENDIF
1514
1515	ENDDO
1516
1517	!
1518	!-- masked arrays
1519	IF ( masks > 0 ) WRITE ( io, 345 ) &
1520	mask_scale_x, mask_scale_y, mask_scale_z
1521	DO mid = 1, masks
1522	DO av = 0, 1
1523
1524	i = 1
1525	domask_chr = ''
1526	DO WHILE ( domask(mid,av,i) /= ' ' )
1527	domask_chr = TRIM( domask_chr ) // ' ' // &
1528	TRIM( domask(mid,av,i) ) // ','
1529	i = i + 1
1530	ENDDO
1531
1532	IF ( domask_chr /= '' ) THEN
1533	IF ( av == 0 ) THEN
1534	WRITE ( io, 346 ) '', mid
1535	ELSE
1536	WRITE ( io, 346 ) ' (time-averaged)', mid
1537	ENDIF
1538
1539	output_format = output_format_netcdf
1540	!-- Parallel output not implemented for mask data, hence
1541	!-- output_format must be adjusted.
1542	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
1543	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
1544	WRITE ( io, 344 ) output_format
1545
1546	IF ( av == 0 ) THEN
1547	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1548	ELSE
1549	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1550	averaging_interval, dt_averaging_input
1551	ENDIF
1552
1553	IF ( av == 0 ) THEN
1554	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
1555	WRITE ( io, 339 ) skip_time_domask(mid)
1556	ENDIF
1557	ELSE
1558	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
1559	WRITE ( io, 339 ) skip_time_data_output_av
1560	ENDIF
1561	ENDIF
1562	!
1563	!-- output locations
1564	DO dim = 1, 3
1565	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
1566	count = 0
1567	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
1568	count = count + 1
1569	ENDDO
1570	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1571	mask(mid,dim,:count)
1572	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
1573	mask_loop(mid,dim,2) < 0.0_wp .AND. &
1574	mask_loop(mid,dim,3) == 0.0_wp ) THEN
1575	WRITE ( io, 350 ) dir(dim), dir(dim)
1576	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
1577	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1578	mask_loop(mid,dim,1:2)
1579	ELSE
1580	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1581	mask_loop(mid,dim,1:3)
1582	ENDIF
1583	ENDDO
1584	ENDIF
1585
1586	ENDDO
1587	ENDDO
1588
1589	!
1590	!-- Timeseries
1591	IF ( dt_dots /= 9999999.9_wp ) THEN
1592	WRITE ( io, 340 )
1593
1594	output_format = output_format_netcdf
1595	WRITE ( io, 344 ) output_format
1596	WRITE ( io, 341 ) dt_dots
1597	ENDIF
1598
1599	#if defined( __dvrp_graphics )
1600	!
1601	!-- Dvrp-output
1602	IF ( dt_dvrp /= 9999999.9_wp ) THEN
1603	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1604	TRIM( dvrp_username ), TRIM( dvrp_directory )
1605	i = 1
1606	l = 0
1607	m = 0
1608	DO WHILE ( mode_dvrp(i) /= ' ' )
1609	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1610	READ ( mode_dvrp(i), '(10X,I2)' ) j
1611	l = l + 1
1612	IF ( do3d(0,j) /= ' ' ) THEN
1613	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1614	isosurface_color(:,l)
1615	ENDIF
1616	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1617	READ ( mode_dvrp(i), '(6X,I2)' ) j
1618	m = m + 1
1619	IF ( do2d(0,j) /= ' ' ) THEN
1620	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1621	slicer_range_limits_dvrp(:,m)
1622	ENDIF
1623	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1624	WRITE ( io, 363 ) dvrp_psize
1625	IF ( particle_dvrpsize /= 'none' ) THEN
1626	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1627	dvrpsize_interval
1628	ENDIF
1629	IF ( particle_color /= 'none' ) THEN
1630	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1631	color_interval
1632	ENDIF
1633	ENDIF
1634	i = i + 1
1635	ENDDO
1636
1637	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1638	superelevation_y, superelevation, clip_dvrp_l, &
1639	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1640
1641	IF ( TRIM( topography ) /= 'flat' ) THEN
1642	WRITE ( io, 366 ) topography_color
1643	IF ( cluster_size > 1 ) THEN
1644	WRITE ( io, 367 ) cluster_size
1645	ENDIF
1646	ENDIF
1647
1648	ENDIF
1649	#endif
1650
1651	#if defined( __spectra )
1652	!
1653	!-- Spectra output
1654	IF ( dt_dosp /= 9999999.9_wp ) THEN
1655	WRITE ( io, 370 )
1656
1657	output_format = output_format_netcdf
1658	WRITE ( io, 344 ) output_format
1659	WRITE ( io, 371 ) dt_dosp
1660	IF ( skip_time_dosp /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dosp
1661	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1662	( spectra_direction(i), i = 1,10 ), &
1663	( comp_spectra_level(i), i = 1,100 ), &
1664	( plot_spectra_level(i), i = 1,100 ), &
1665	averaging_interval_sp, dt_averaging_input_pr
1666	ENDIF
1667	#endif
1668
1669	WRITE ( io, 99 )
1670
1671	!
1672	!-- Physical quantities
1673	WRITE ( io, 400 )
1674
1675	!
1676	!-- Geostrophic parameters
1677	IF ( radiation .AND. radiation_scheme /= 'constant' ) THEN
1678	WRITE ( io, 417 ) lambda
1679	ENDIF
1680	WRITE ( io, 410 ) phi, omega, f, fs
1681
1682	!
1683	!-- Other quantities
1684	WRITE ( io, 411 ) g
1685	IF ( radiation .AND. radiation_scheme /= 'constant' ) THEN
1686	WRITE ( io, 418 ) day_init, time_utc_init
1687	ENDIF
1688
1689	WRITE ( io, 412 ) TRIM( reference_state )
1690	IF ( use_single_reference_value ) THEN
1691	IF ( ocean ) THEN
1692	WRITE ( io, 413 ) prho_reference
1693	ELSE
1694	WRITE ( io, 414 ) pt_reference
1695	ENDIF
1696	ENDIF
1697
1698	!
1699	!-- Cloud physics parameters
1700	IF ( cloud_physics ) THEN
1701	WRITE ( io, 415 )
1702	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1703	IF ( icloud_scheme == 0 ) THEN
1704	WRITE ( io, 510 ) 1.0E-6_wp * nc_const
1705	IF ( precipitation ) WRITE ( io, 511 ) c_sedimentation
1706	ENDIF
1707	ENDIF
1708
1709	!
1710	!-- Cloud physcis parameters / quantities / numerical methods
1711	WRITE ( io, 430 )
1712	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1713	WRITE ( io, 431 )
1714	ELSEIF ( humidity .AND. cloud_physics ) THEN
1715	WRITE ( io, 432 )
1716	IF ( cloud_top_radiation ) WRITE ( io, 132 )
1717	IF ( icloud_scheme == 1 ) THEN
1718	IF ( precipitation ) WRITE ( io, 133 )
1719	ELSEIF ( icloud_scheme == 0 ) THEN
1720	IF ( drizzle ) WRITE ( io, 506 )
1721	IF ( precipitation ) THEN
1722	WRITE ( io, 505 )
1723	IF ( turbulence ) WRITE ( io, 507 )
1724	IF ( ventilation_effect ) WRITE ( io, 508 )
1725	IF ( limiter_sedimentation ) WRITE ( io, 509 )
1726	ENDIF
1727	ENDIF
1728	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1729	WRITE ( io, 433 )
1730	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1731	IF ( collision_kernel /= 'none' ) THEN
1732	WRITE ( io, 435 ) TRIM( collision_kernel )
1733	IF ( collision_kernel(6:9) == 'fast' ) THEN
1734	WRITE ( io, 436 ) radius_classes, dissipation_classes
1735	ENDIF
1736	ELSE
1737	WRITE ( io, 437 )
1738	ENDIF
1739	ENDIF
1740
1741	!
1742	!-- LES / turbulence parameters
1743	WRITE ( io, 450 )
1744
1745	!--
1746	! ... LES-constants used must still be added here
1747	!--
1748	IF ( constant_diffusion ) THEN
1749	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1750	prandtl_number
1751	ENDIF
1752	IF ( .NOT. constant_diffusion) THEN
1753	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
1754	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
1755	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1756	ENDIF
1757
1758	!
1759	!-- Special actions during the run
1760	WRITE ( io, 470 )
1761	IF ( create_disturbances ) THEN
1762	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1763	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1764	zu(disturbance_level_ind_t), disturbance_level_ind_t
1765	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1766	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1767	ELSE
1768	WRITE ( io, 473 ) disturbance_energy_limit
1769	ENDIF
1770	WRITE ( io, 474 ) TRIM( random_generator )
1771	ENDIF
1772	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
1773	WRITE ( io, 475 ) pt_surface_initial_change
1774	ENDIF
1775	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
1776	WRITE ( io, 476 ) q_surface_initial_change
1777	ENDIF
1778	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
1779	WRITE ( io, 477 ) q_surface_initial_change
1780	ENDIF
1781
1782	IF ( particle_advection ) THEN
1783	!
1784	!-- Particle attributes
1785	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1786	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1787	end_time_prel
1788	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1789	IF ( random_start_position ) WRITE ( io, 481 )
1790	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1791	WRITE ( io, 495 ) total_number_of_particles
1792	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1793	WRITE ( io, 483 ) maximum_number_of_tailpoints
1794	IF ( minimum_tailpoint_distance /= 0 ) THEN
1795	WRITE ( io, 484 ) total_number_of_tails, &
1796	minimum_tailpoint_distance, &
1797	maximum_tailpoint_age
1798	ENDIF
1799	ENDIF
1800	IF ( dt_write_particle_data /= 9999999.9_wp ) THEN
1801	WRITE ( io, 485 ) dt_write_particle_data
1802	IF ( netcdf_data_format > 1 ) THEN
1803	output_format = 'netcdf (64 bit offset) and binary'
1804	ELSE
1805	output_format = 'netcdf and binary'
1806	ENDIF
1807	WRITE ( io, 344 ) output_format
1808	ENDIF
1809	IF ( dt_dopts /= 9999999.9_wp ) WRITE ( io, 494 ) dt_dopts
1810	IF ( write_particle_statistics ) WRITE ( io, 486 )
1811
1812	WRITE ( io, 487 ) number_of_particle_groups
1813
1814	DO i = 1, number_of_particle_groups
1815	IF ( i == 1 .AND. density_ratio(i) == 9999999.9_wp ) THEN
1816	WRITE ( io, 490 ) i, 0.0_wp
1817	WRITE ( io, 492 )
1818	ELSE
1819	WRITE ( io, 490 ) i, radius(i)
1820	IF ( density_ratio(i) /= 0.0_wp ) THEN
1821	WRITE ( io, 491 ) density_ratio(i)
1822	ELSE
1823	WRITE ( io, 492 )
1824	ENDIF
1825	ENDIF
1826	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1827	pdx(i), pdy(i), pdz(i)
1828	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1829	ENDDO
1830
1831	ENDIF
1832
1833
1834	!
1835	!-- Parameters of 1D-model
1836	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1837	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1838	mixing_length_1d, dissipation_1d
1839	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1840	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1841	ENDIF
1842	ENDIF
1843
1844	!
1845	!-- User-defined information
1846	CALL user_header( io )
1847
1848	WRITE ( io, 99 )
1849
1850	!
1851	!-- Write buffer contents to disc immediately
1852	CALL local_flush( io )
1853
1854	!
1855	!-- Here the FORMATs start
1856
1857	99 FORMAT (1X,78('-'))
1858	100 FORMAT (/1X,'******************************',4X,44('-')/ &
1859	1X,'* ',A,' *',4X,A/ &
1860	1X,'******************************',4X,44('-'))
1861	101 FORMAT (35X,'coupled run using MPI-',I1,': ',A/ &
1862	35X,42('-'))
1863	102 FORMAT (/' Date: ',A8,4X,'Run: ',A20/ &
1864	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
1865	' Run on host: ',A10)
1866	#if defined( __parallel )
1867	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
1868	')',1X,A)
1869	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
1870	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
1871	105 FORMAT (35X,'One additional PE is used to handle'/37X,'the dvrp output!')
1872	106 FORMAT (35X,'A 1d-decomposition along x is forced'/ &
1873	35X,'because the job is running on an SMP-cluster')
1874	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
1875	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
1876	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
1877	35X,42('-'))
1878	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
1879	35X,'independent precursor runs'/ &
1880	35X,42('-'))
1881	117 FORMAT (' Accelerator boards / node: ',I2)
1882	#endif
1883	110 FORMAT (/' Numerical Schemes:'/ &
1884	' -----------------'/)
1885	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1886	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1887	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1888	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1889	' or Upstream')
1890	115 FORMAT (' FFT and transpositions are overlapping')
1891	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1892	' or Upstream')
1893	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1894	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1895	' translation velocity = ',A/ &
1896	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1897	120 FORMAT (' Accelerator boards: ',8X,I2)
1898	122 FORMAT (' --> Time differencing scheme: ',A)
1899	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1900	' maximum damping coefficient: ',F5.3, ' 1/s')
1901	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1902	130 FORMAT (' --> Additional prognostic equation for the total water content')
1903	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1904	F6.2, ' K assumed')
1905	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1906	' effective emissivity scheme')
1907	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1908	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1909	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1910	A,'-cycle)'/ &
1911	' number of grid levels: ',I2/ &
1912	' Gauss-Seidel red/black iterations: ',I2)
1913	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1914	I3,')')
1915	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1916	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1917	I3,')'/ &
1918	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1919	I3,')')
1920	139 FORMAT (' --> Loop optimization method: ',A)
1921	140 FORMAT (' maximum residual allowed: ',E10.3)
1922	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1923	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1924	'step')
1925	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1926	'kinetic energy')
1927	144 FORMAT (' masking method is used')
1928	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1929	'conserved'/ &
1930	' using the ',A,' mode')
1931	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1932	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1933	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1934	/' starting from dp_level_b =', F8.3, 'm', A /)
1935	160 FORMAT (//' Large scale forcing and nudging:'/ &
1936	' -------------------------------'/)
1937	161 FORMAT (' --> No large scale forcing from external is used (default) ')
1938	162 FORMAT (' --> Large scale forcing from external file LSF_DATA is used: ')
1939	163 FORMAT (' - large scale advection tendencies ')
1940	164 FORMAT (' - large scale subsidence velocity w_subs ')
1941	165 FORMAT (' - large scale subsidence tendencies ')
1942	167 FORMAT (' - and geostrophic wind components ug and vg')
1943	168 FORMAT (' --> Large-scale vertical motion is used in the ', &
1944	'prognostic equation(s) for')
1945	169 FORMAT (' the scalar(s) only')
1946	170 FORMAT (' --> Nudging is used')
1947	171 FORMAT (' --> No nudging is used (default) ')
1948	180 FORMAT (' - prescribed surface values for temperature')
1949	181 FORMAT (' - prescribed surface fluxes for temperature')
1950	182 FORMAT (' - prescribed surface values for humidity')
1951	183 FORMAT (' - prescribed surface fluxes for humidity')
1952	200 FORMAT (//' Run time and time step information:'/ &
1953	' ----------------------------------'/)
1954	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1955	' CFL-factor: ',F4.2)
1956	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1957	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1958	' End time: ',F9.3,' s')
1959	204 FORMAT ( A,F9.3,' s')
1960	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1961	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1962	' CPU-time used: ',F9.3,' s per timestep: ', &
1963	' ',F9.3,' s'/ &
1964	' per second of simulated tim', &
1965	'e: ',F9.3,' s')
1966	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1967	250 FORMAT (//' Computational grid and domain size:'/ &
1968	' ----------------------------------'// &
1969	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1970	' m dz = ',F7.3,' m'/ &
1971	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1972	' m z(u) = ',F10.3,' m'/)
1973	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1974	' factor: ',F5.3/ &
1975	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1976	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1977	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1978	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1979	' degrees')
1980	270 FORMAT (//' Topography information:'/ &
1981	' ----------------------'// &
1982	1X,'Topography: ',A)
1983	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1984	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1985	' / ',I4)
1986	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1987	' direction' / &
1988	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1989	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1990	278 FORMAT (' Topography grid definition convention:'/ &
1991	' cell edge (staggered grid points'/ &
1992	' (u in x-direction, v in y-direction))' /)
1993	279 FORMAT (' Topography grid definition convention:'/ &
1994	' cell center (scalar grid points)' /)
1995	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1996	' ------------------------------'// &
1997	' Canopy mode: ', A / &
1998	' Canopy height: ',F6.2,'m (',I4,' grid points)' / &
1999	' Leaf drag coefficient: ',F6.2 /)
2000	281 FORMAT (/ ' Scalar exchange coefficient: ',F6.2 / &
2001	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
2002	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
2003	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
2004	' Height: ',A,' m'/ &
2005	' Leaf area density: ',A,' m2/m3'/ &
2006	' Gradient: ',A,' m2/m4'/ &
2007	' Gridpoint: ',A)
2008	284 FORMAT (//' Characteristic levels of the leaf area density and coefficients:'// &
2009	' Height: ',A,' m'/ &
2010	' Leaf area density: ',A,' m2/m3'/ &
2011	' Coefficient alpha: ',F6.2 / &
2012	' Coefficient beta: ',F6.2 / &
2013	' Leaf area index: ',F6.2,' m2/m2' /)
2014
2015	300 FORMAT (//' Boundary conditions:'/ &
2016	' -------------------'// &
2017	' p uv ', &
2018	' pt'// &
2019	' B. bound.: ',A/ &
2020	' T. bound.: ',A)
2021	301 FORMAT (/' ',A// &
2022	' B. bound.: ',A/ &
2023	' T. bound.: ',A)
2024	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
2025	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
2026	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
2027	'computational u,v-level:'// &
2028	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
2029	' m kappa = ',F4.2/ &
2030	' Rif value range: ',F6.2,' <= rif <=',F6.2)
2031	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
2032	307 FORMAT (' Heatflux has a random normal distribution')
2033	308 FORMAT (' Predefined surface temperature')
2034	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
2035	310 FORMAT (//' 1D-Model:'// &
2036	' Rif value range: ',F6.2,' <= rif <=',F6.2)
2037	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
2038	312 FORMAT (' Predefined surface humidity')
2039	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
2040	314 FORMAT (' Predefined scalar value at the surface')
2041	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
2042	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
2043	'atmosphere model')
2044	317 FORMAT (//' Lateral boundaries:'/ &
2045	' left/right: ',A/ &
2046	' north/south: ',A)
2047	318 FORMAT (/' use_cmax: ',L1 / &
2048	' pt damping layer width = ',F8.2,' m, pt ', &
2049	'damping factor = ',F6.4)
2050	319 FORMAT (' turbulence recycling at inflow switched on'/ &
2051	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
2052	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
2053	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
2054	' v: ',F9.6,' m2/s2')
2055	321 FORMAT (//' Initial profiles:'/ &
2056	' ----------------')
2057	322 FORMAT (' turbulence recycling at inflow switched on'/ &
2058	' y shift of the recycled inflow turbulence switched on'/ &
2059	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
2060	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/q)
2061	325 FORMAT (//' List output:'/ &
2062	' -----------'// &
2063	' 1D-Profiles:'/ &
2064	' Output every ',F8.2,' s')
2065	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
2066	' Averaging input every ',F8.2,' s')
2067	330 FORMAT (//' Data output:'/ &
2068	' -----------'/)
2069	331 FORMAT (/' 1D-Profiles:')
2070	332 FORMAT (/' ',A)
2071	333 FORMAT (' Output every ',F8.2,' s',/ &
2072	' Time averaged over ',F8.2,' s'/ &
2073	' Averaging input every ',F8.2,' s')
2074	334 FORMAT (/' 2D-Arrays',A,':')
2075	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
2076	' Output every ',F8.2,' s ',A/ &
2077	' Cross sections at ',A1,' = ',A/ &
2078	' scalar-coordinates: ',A,' m'/)
2079	336 FORMAT (/' 3D-Arrays',A,':')
2080	337 FORMAT (/' Arrays: ',A/ &
2081	' Output every ',F8.2,' s ',A/ &
2082	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
2083	339 FORMAT (' No output during initial ',F8.2,' s')
2084	340 FORMAT (/' Time series:')
2085	341 FORMAT (' Output every ',F8.2,' s'/)
2086	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
2087	' Output every ',F8.2,' s ',A/ &
2088	' Time averaged over ',F8.2,' s'/ &
2089	' Averaging input every ',F8.2,' s'/ &
2090	' Cross sections at ',A1,' = ',A/ &
2091	' scalar-coordinates: ',A,' m'/)
2092	343 FORMAT (/' Arrays: ',A/ &
2093	' Output every ',F8.2,' s ',A/ &
2094	' Time averaged over ',F8.2,' s'/ &
2095	' Averaging input every ',F8.2,' s'/ &
2096	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
2097	344 FORMAT (' Output format: ',A/)
2098	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
2099	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
2100	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
2101	' mask_scale_z (in z-direction): ',F9.3, ' m' )
2102	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
2103	347 FORMAT (' Variables: ',A/ &
2104	' Output every ',F8.2,' s')
2105	348 FORMAT (' Variables: ',A/ &
2106	' Output every ',F8.2,' s'/ &
2107	' Time averaged over ',F8.2,' s'/ &
2108	' Averaging input every ',F8.2,' s')
2109	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
2110	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
2111	13(' ',8(F8.2,',')/) )
2112	350 FORMAT (/' Output locations in ',A,'-direction: ', &
2113	'all gridpoints along ',A,'-direction (default).' )
2114	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
2115	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
2116	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
2117	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
2118	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
2119	#if defined( __dvrp_graphics )
2120	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
2121	' Output every ',F7.1,' s'/ &
2122	' Output mode: ',A/ &
2123	' Host / User: ',A,' / ',A/ &
2124	' Directory: ',A// &
2125	' The sequence contains:')
2126	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
2127	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
2128	362 FORMAT (/' Slicer plane ',A/ &
2129	' Slicer limits: [',F6.2,',',F6.2,']')
2130	363 FORMAT (/' Particles'/ &
2131	' particle size: ',F7.2,' m')
2132	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
2133	F6.2,',',F6.2,']')
2134	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
2135	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
2136	')'/ &
2137	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
2138	' from y = ',F9.1,' m to y = ',F9.1,' m')
2139	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
2140	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
2141	#endif
2142	#if defined( __spectra )
2143	370 FORMAT (' Spectra:')
2144	371 FORMAT (' Output every ',F7.1,' s'/)
2145	372 FORMAT (' Arrays: ', 10(A5,',')/ &
2146	' Directions: ', 10(A5,',')/ &
2147	' height levels k = ', 20(I3,',')/ &
2148	' ', 20(I3,',')/ &
2149	' ', 20(I3,',')/ &
2150	' ', 20(I3,',')/ &
2151	' ', 19(I3,','),I3,'.'/ &
2152	' height levels selected for standard plot:'/ &
2153	' k = ', 20(I3,',')/ &
2154	' ', 20(I3,',')/ &
2155	' ', 20(I3,',')/ &
2156	' ', 20(I3,',')/ &
2157	' ', 19(I3,','),I3,'.'/ &
2158	' Time averaged over ', F7.1, ' s,' / &
2159	' Profiles for the time averaging are taken every ', &
2160	F6.1,' s')
2161	#endif
2162	400 FORMAT (//' Physical quantities:'/ &
2163	' -------------------'/)
2164	410 FORMAT (' Geograph. latitude : phi = ',F4.1,' degr'/ &
2165	' Angular velocity : omega = ',E9.3,' rad/s'/ &
2166	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
2167	' f* = ',F9.6,' 1/s')
2168	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
2169	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
2170	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
2171	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
2172	415 FORMAT (/' Cloud physics parameters:'/ &
2173	' ------------------------'/)
2174	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
2175	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
2176	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
2177	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
2178	' Vapourization heat : L_v = ',E8.2,' J/kg')
2179	417 FORMAT (' Geograph. longitude : lambda = ',F4.1,' degr')
2180	418 FORMAT (/' Day of the year at model start : day_init = ',I3 &
2181	/' UTC time at model start : time_utc_init = ',F7.1' s')
2182	419 FORMAT (//' Land surface model information:'/ &
2183	' ------------------------------'/)
2184	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
2185	' Height: ',A,' m'/ &
2186	' Temperature: ',A,' K'/ &
2187	' Gradient: ',A,' K/100m'/ &
2188	' Gridpoint: ',A)
2189	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
2190	' Height: ',A,' m'/ &
2191	' Humidity: ',A,' kg/kg'/ &
2192	' Gradient: ',A,' (kg/kg)/100m'/ &
2193	' Gridpoint: ',A)
2194	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
2195	' Height: ',A,' m'/ &
2196	' Scalar concentration: ',A,' kg/m**3'/ &
2197	' Gradient: ',A,' (kg/m**3)/100m'/ &
2198	' Gridpoint: ',A)
2199	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
2200	' Height: ',A,' m'/ &
2201	' ug: ',A,' m/s'/ &
2202	' Gradient: ',A,' 1/100s'/ &
2203	' Gridpoint: ',A)
2204	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
2205	' Height: ',A,' m'/ &
2206	' vg: ',A,' m/s'/ &
2207	' Gradient: ',A,' 1/100s'/ &
2208	' Gridpoint: ',A)
2209	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
2210	' Height: ',A,' m'/ &
2211	' Salinity: ',A,' psu'/ &
2212	' Gradient: ',A,' psu/100m'/ &
2213	' Gridpoint: ',A)
2214	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
2215	' Height: ',A,' m'/ &
2216	' w_subs: ',A,' m/s'/ &
2217	' Gradient: ',A,' (m/s)/100m'/ &
2218	' Gridpoint: ',A)
2219	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
2220	' profiles')
2221	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
2222	' NUDGING_DATA')
2223	430 FORMAT (//' Cloud physics quantities / methods:'/ &
2224	' ----------------------------------'/)
2225	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
2226	'on)')
2227	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
2228	' total water content is used.'/ &
2229	' Condensation is parameterized via 0% - or 100% scheme.')
2230	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
2231	'icle model')
2232	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
2233	' droplets < 1.0E-6 m')
2234	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
2235	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
2236	'are used'/ &
2237	' number of radius classes: ',I3,' interval ', &
2238	'[1.0E-6,2.0E-4] m'/ &
2239	' number of dissipation classes: ',I2,' interval ', &
2240	'[0,1000] cm2/s3')
2241	437 FORMAT (' Droplet collision is switched off')
2242	438 FORMAT (' --> Land surface type : ',A,/ &
2243	' --> Soil porosity type : ',A)
2244	439 FORMAT (/' Initial soil temperature and moisture profile:'// &
2245	' Height: ',A,' m'/ &
2246	' Temperature: ',A,' K'/ &
2247	' Moisture: ',A,' m3/m3'/ &
2248	' Root fraction: ',A,' '/ &
2249	' Gridpoint: ',A)
2250	440 FORMAT (/' --> Dewfall is allowed (default)')
2251	441 FORMAT (' --> Dewfall is inhibited')
2252	442 FORMAT (' --> Soil bottom is closed (water content is conserved, default)')
2253	443 FORMAT (' --> Soil bottom is open (water content is not conserved)')
2254	444 FORMAT (//' Radiation model information:'/ &
2255	' ----------------------------'/)
2256	445 FORMAT (' --> Using constant net radiation: net_radiation = ', F6.2, ' W/m**2')
2257	446 FORMAT (' --> Simple radiation scheme for clear sky is used (no clouds,', &
2258	' default)')
2259	447 FORMAT (' --> Radiation scheme:', A)
2260	448 FORMAT (/' Surface albedo: albedo = ', F5.3)
2261	449 FORMAT (' Timestep: dt_radiation = ', F5.2, ' s')
2262
2263	450 FORMAT (//' LES / Turbulence quantities:'/ &
2264	' ---------------------------'/)
2265	451 FORMAT (' Diffusion coefficients are constant:'/ &
2266	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
2267	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
2268	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
2269	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
2270	470 FORMAT (//' Actions during the simulation:'/ &
2271	' -----------------------------'/)
2272	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
2273	' Disturbance amplitude : ',F4.2, ' m/s'/ &
2274	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
2275	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
2276	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2277	' to i/j =',I4)
2278	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2279	1X,F5.3, ' m2/s2')
2280	474 FORMAT (' Random number generator used : ',A/)
2281	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2282	'respectively, if'/ &
2283	' the value is negative) by ',F5.2,' K at the beginning of the',&
2284	' 3D-simulation'/)
2285	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2286	'respectively, if the'/ &
2287	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2288	' the 3D-simulation'/)
2289	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2290	'respectively, if the'/ &
2291	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2292	' the 3D-simulation'/)
2293	480 FORMAT (' Particles:'/ &
2294	' ---------'// &
2295	' Particle advection is active (switched on at t = ', F7.1, &
2296	' s)'/ &
2297	' Start of new particle generations every ',F6.1,' s'/ &
2298	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2299	' bottom: ', A, ' top: ', A/&
2300	' Maximum particle age: ',F9.1,' s'/ &
2301	' Advection stopped at t = ',F9.1,' s'/)
2302	481 FORMAT (' Particles have random start positions'/)
2303	482 FORMAT (' Particles are advected only horizontally'/)
2304	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2305	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2306	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2307	' Maximum age of the end of the tail: ',F8.2,' s')
2308	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2309	486 FORMAT (' Particle statistics are written on file'/)
2310	487 FORMAT (' Number of particle groups: ',I2/)
2311	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2312	' minimum timestep for advection: ', F7.5/)
2313	489 FORMAT (' Number of particles simultaneously released at each ', &
2314	'point: ', I5/)
2315	490 FORMAT (' Particle group ',I2,':'/ &
2316	' Particle radius: ',E10.3, 'm')
2317	491 FORMAT (' Particle inertia is activated'/ &
2318	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2319	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2320	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2321	' y:',F8.1,' - ',F8.1,' m'/&
2322	' z:',F8.1,' - ',F8.1,' m'/&
2323	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2324	' m dz = ',F8.1,' m'/)
2325	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2326	F8.2,' s'/)
2327	495 FORMAT (' Number of particles in total domain: ',I10/)
2328	500 FORMAT (//' 1D-Model parameters:'/ &
2329	' -------------------'// &
2330	' Simulation time: ',F8.1,' s'/ &
2331	' Run-controll output every: ',F8.1,' s'/ &
2332	' Vertical profile output every: ',F8.1,' s'/ &
2333	' Mixing length calculation: ',A/ &
2334	' Dissipation calculation: ',A/)
2335	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2336	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2337	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2338	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
2339	506 FORMAT (' Drizzle parameterization via Stokes law')
2340	507 FORMAT (' Turbulence effects on precipitation process')
2341	508 FORMAT (' Ventilation effects on evaporation of rain drops')
2342	509 FORMAT (' Slope limiter used for sedimentation process')
2343	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
2344	511 FORMAT (' Sedimentation Courant number: '/&
2345	' C_s = ',F3.1,' ')
2346	512 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
2347	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
2348	' Run on host: ',A10,6X,'En-No.: ',I2.2)
2349	513 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order ' // &
2350	'+ monotonic adjustment')
2351
2352
2353	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |