Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1202

Last change on this file since 1202 was 1182, checked in by raasch, 11 years ago
last commit documented, rc-file for example run updated
Property svn:keywords set to `Id`
File size: 78.6 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1182 2013-06-14 09:07:24Z witha $
27	!
28	! 1179 2013-06-14 05:57:58Z raasch
29	! output of reference_state, use_reference renamed use_single_reference_value
30	!
31	! 1159 2013-05-21 11:58:22Z fricke
32	! +use_cmax
33	!
34	! 1115 2013-03-26 18:16:16Z hoffmann
35	! descriptions for Seifert-Beheng-cloud-physics-scheme added
36	!
37	! 1111 2013-03-08 23:54:10Z raasch
38	! output of accelerator board information
39	! ibc_p_b = 2 removed
40	!
41	! 1108 2013-03-05 07:03:32Z raasch
42	! bugfix for r1106
43	!
44	! 1106 2013-03-04 05:31:38Z raasch
45	! some format changes for coupled runs
46	!
47	! 1092 2013-02-02 11:24:22Z raasch
48	! unused variables removed
49	!
50	! 1036 2012-10-22 13:43:42Z raasch
51	! code put under GPL (PALM 3.9)
52	!
53	! 1031 2012-10-19 14:35:30Z raasch
54	! output of netCDF data format modified
55	!
56	! 1015 2012-09-27 09:23:24Z raasch
57	! output of Aajustment of mixing length to the Prandtl mixing length at first
58	! grid point above ground removed
59	!
60	! 1003 2012-09-14 14:35:53Z raasch
61	! output of information about equal/unequal subdomain size removed
62	!
63	! 1001 2012-09-13 14:08:46Z raasch
64	! all actions concerning leapfrog- and upstream-spline-scheme removed
65	!
66	! 978 2012-08-09 08:28:32Z fricke
67	! -km_damp_max, outflow_damping_width
68	! +pt_damping_factor, pt_damping_width
69	! +z0h
70	!
71	! 964 2012-07-26 09:14:24Z raasch
72	! output of profil-related quantities removed
73	!
74	! 940 2012-07-09 14:31:00Z raasch
75	! Output in case of simulations for pure neutral stratification (no pt-equation
76	! solved)
77	!
78	! 927 2012-06-06 19:15:04Z raasch
79	! output of masking_method for mg-solver
80	!
81	! 868 2012-03-28 12:21:07Z raasch
82	! translation velocity in Galilean transformation changed to 0.6 * ug
83	!
84	! 833 2012-02-22 08:55:55Z maronga
85	! Adjusted format for leaf area density
86	!
87	! 828 2012-02-21 12:00:36Z raasch
88	! output of dissipation_classes + radius_classes
89	!
90	! 825 2012-02-19 03:03:44Z raasch
91	! Output of cloud physics parameters/quantities complemented and restructured
92	!
93	! 767 2011-10-14 06:39:12Z raasch
94	! Output of given initial u,v-profiles
95	!
96	! 759 2011-09-15 13:58:31Z raasch
97	! output of maximum number of parallel io streams
98	!
99	! 707 2011-03-29 11:39:40Z raasch
100	! bc_lr/ns replaced by bc_lr/ns_cyc
101	!
102	! 667 2010-12-23 12:06:00Z suehring/gryschka
103	! Output of advection scheme.
104	! Modified output of Prandtl-layer height.
105	!
106	! 580 2010-10-05 13:59:11Z heinze
107	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
108	! ws_vertical_gradient_level to subs_vertical_gradient_level and
109	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
110	!
111	! 493 2010-03-01 08:30:24Z raasch
112	! NetCDF data output format extendend for NetCDF4/HDF5
113	!
114	! 449 2010-02-02 11:23:59Z raasch
115	! +large scale vertical motion (subsidence/ascent)
116	! Bugfix: index problem concerning gradient_level indices removed
117	!
118	! 410 2009-12-04 17:05:40Z letzel
119	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
120	! mask_scale\|_x\|y\|z, masks, skip_time_domask
121	!
122	! 346 2009-07-06 10:13:41Z raasch
123	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
124	! Coupling with independent precursor runs.
125	! Output of messages replaced by message handling routine.
126	! Output of several additional dvr parameters
127	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
128	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
129	! dp_smooth, dpdxy, u_bulk, v_bulk
130	! topography_grid_convention moved from user_header
131	! small bugfix concerning 3d 64bit netcdf output format
132	!
133	! 206 2008-10-13 14:59:11Z raasch
134	! Bugfix: error in zu index in case of section_xy = -1
135	!
136	! 198 2008-09-17 08:55:28Z raasch
137	! Format adjustments allowing output of larger revision numbers
138	!
139	! 197 2008-09-16 15:29:03Z raasch
140	! allow 100 spectra levels instead of 10 for consistency with
141	! define_netcdf_header,
142	! bugfix in the output of the characteristic levels of potential temperature,
143	! geostrophic wind, scalar concentration, humidity and leaf area density,
144	! output of turbulence recycling informations
145	!
146	! 138 2007-11-28 10:03:58Z letzel
147	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
148	! Allow two instead of one digit to specify isosurface and slicer variables.
149	! Output of sorting frequency of particles
150	!
151	! 108 2007-08-24 15:10:38Z letzel
152	! Output of informations for coupled model runs (boundary conditions etc.)
153	! + output of momentumfluxes at the top boundary
154	! Rayleigh damping for ocean, e_init
155	!
156	! 97 2007-06-21 08:23:15Z raasch
157	! Adjustments for the ocean version.
158	! use_pt_reference renamed use_reference
159	!
160	! 87 2007-05-22 15:46:47Z raasch
161	! Bugfix: output of use_upstream_for_tke
162	!
163	! 82 2007-04-16 15:40:52Z raasch
164	! Preprocessor strings for different linux clusters changed to "lc",
165	! routine local_flush is used for buffer flushing
166	!
167	! 76 2007-03-29 00:58:32Z raasch
168	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
169	! output of the loop optimization method, moisture renamed humidity,
170	! output of subversion revision number
171	!
172	! 19 2007-02-23 04:53:48Z raasch
173	! Output of scalar flux applied at top boundary
174	!
175	! RCS Log replace by Id keyword, revision history cleaned up
176	!
177	! Revision 1.63 2006/08/22 13:53:13 raasch
178	! Output of dz_max
179	!
180	! Revision 1.1 1997/08/11 06:17:20 raasch
181	! Initial revision
182	!
183	!
184	! Description:
185	! ------------
186	! Writing a header with all important informations about the actual run.
187	! This subroutine is called three times, two times at the beginning
188	! (writing information on files RUN_CONTROL and HEADER) and one time at the
189	! end of the run, then writing additional information about CPU-usage on file
190	! header.
191	!-----------------------------------------------------------------------------!
192
193	USE arrays_3d
194	USE control_parameters
195	USE cloud_parameters
196	USE cpulog
197	USE dvrp_variables
198	USE grid_variables
199	USE indices
200	USE model_1d
201	USE particle_attributes
202	USE pegrid
203	USE subsidence_mod
204	USE spectrum
205
206	IMPLICIT NONE
207
208	CHARACTER (LEN=1) :: prec
209	CHARACTER (LEN=2) :: do2d_mode
210	CHARACTER (LEN=5) :: section_chr
211	CHARACTER (LEN=10) :: coor_chr, host_chr
212	CHARACTER (LEN=16) :: begin_chr
213	CHARACTER (LEN=26) :: ver_rev
214	CHARACTER (LEN=40) :: output_format
215	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
216	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
217	domask_chr, run_classification
218	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
219	temperatures, ugcomponent, vgcomponent
220	CHARACTER (LEN=85) :: roben, runten
221
222	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
223
224	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
225	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
226	REAL :: cpuseconds_per_simulated_second
227
228	!
229	!-- Open the output file. At the end of the simulation, output is directed
230	!-- to unit 19.
231	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
232	.NOT. simulated_time_at_begin /= simulated_time ) THEN
233	io = 15 ! header output on file RUN_CONTROL
234	ELSE
235	io = 19 ! header output on file HEADER
236	ENDIF
237	CALL check_open( io )
238
239	!
240	!-- At the end of the run, output file (HEADER) will be rewritten with
241	!-- new informations
242	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
243
244	!
245	!-- Determine kind of model run
246	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
247	run_classification = '3D - restart run'
248	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
249	run_classification = '3D - run with cyclic fill of 3D - prerun data'
250	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
251	run_classification = '3D - run without 1D - prerun'
252	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
253	run_classification = '3D - run with 1D - prerun'
254	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
255	run_classification = '3D - run initialized by user'
256	ELSE
257	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
258	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
259	ENDIF
260	IF ( ocean ) THEN
261	run_classification = 'ocean - ' // run_classification
262	ELSE
263	run_classification = 'atmosphere - ' // run_classification
264	ENDIF
265
266	!
267	!-- Run-identification, date, time, host
268	host_chr = host(1:10)
269	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
270	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
271	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
272	#if defined( __mpi2 )
273	mpi_type = 2
274	#else
275	mpi_type = 1
276	#endif
277	WRITE ( io, 101 ) mpi_type, coupling_mode
278	ENDIF
279	#if defined( __parallel )
280	IF ( coupling_start_time /= 0.0 ) THEN
281	IF ( coupling_start_time > simulated_time_at_begin ) THEN
282	WRITE ( io, 109 )
283	ELSE
284	WRITE ( io, 114 )
285	ENDIF
286	ENDIF
287	#endif
288	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
289	ADJUSTR( host_chr )
290	#if defined( __parallel )
291	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
292	char1 = 'calculated'
293	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
294	host(1:2) == 'lc' ) .AND. &
295	npex == -1 .AND. pdims(2) == 1 ) THEN
296	char1 = 'forced'
297	ELSE
298	char1 = 'predefined'
299	ENDIF
300	IF ( threads_per_task == 1 ) THEN
301	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
302	ELSE
303	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
304	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
305	ENDIF
306	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
307	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
308	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
309	npex == -1 .AND. pdims(2) == 1 ) &
310	THEN
311	WRITE ( io, 106 )
312	ELSEIF ( pdims(2) == 1 ) THEN
313	WRITE ( io, 107 ) 'x'
314	ELSEIF ( pdims(1) == 1 ) THEN
315	WRITE ( io, 107 ) 'y'
316	ENDIF
317	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
318	IF ( numprocs /= maximum_parallel_io_streams ) THEN
319	WRITE ( io, 108 ) maximum_parallel_io_streams
320	ENDIF
321	#else
322	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
323	#endif
324	WRITE ( io, 99 )
325
326	!
327	!-- Numerical schemes
328	WRITE ( io, 110 )
329	IF ( psolver(1:7) == 'poisfft' ) THEN
330	WRITE ( io, 111 ) TRIM( fft_method )
331	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
332	ELSEIF ( psolver == 'sor' ) THEN
333	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
334	ELSEIF ( psolver == 'multigrid' ) THEN
335	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
336	IF ( mg_cycles == -1 ) THEN
337	WRITE ( io, 140 ) residual_limit
338	ELSE
339	WRITE ( io, 141 ) mg_cycles
340	ENDIF
341	IF ( mg_switch_to_pe0_level == 0 ) THEN
342	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
343	nzt_mg(1)
344	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
345	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
346	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
347	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
348	nzt_mg(mg_switch_to_pe0_level), &
349	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
350	nzt_mg(1)
351	ENDIF
352	IF ( masking_method ) WRITE ( io, 144 )
353	ENDIF
354	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
355	THEN
356	WRITE ( io, 142 )
357	ENDIF
358
359	IF ( momentum_advec == 'pw-scheme' ) THEN
360	WRITE ( io, 113 )
361	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
362	WRITE ( io, 503 )
363	ENDIF
364	IF ( scalar_advec == 'pw-scheme' ) THEN
365	WRITE ( io, 116 )
366	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
367	WRITE ( io, 504 )
368	ELSE
369	WRITE ( io, 118 )
370	ENDIF
371
372	WRITE ( io, 139 ) TRIM( loop_optimization )
373
374	IF ( galilei_transformation ) THEN
375	IF ( use_ug_for_galilei_tr ) THEN
376	char1 = '0.6 * geostrophic wind'
377	ELSE
378	char1 = 'mean wind in model domain'
379	ENDIF
380	IF ( simulated_time_at_begin == simulated_time ) THEN
381	char2 = 'at the start of the run'
382	ELSE
383	char2 = 'at the end of the run'
384	ENDIF
385	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
386	advected_distance_x/1000.0, advected_distance_y/1000.0
387	ENDIF
388	WRITE ( io, 122 ) timestep_scheme
389	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
390	IF ( rayleigh_damping_factor /= 0.0 ) THEN
391	IF ( .NOT. ocean ) THEN
392	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
393	rayleigh_damping_factor
394	ELSE
395	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
396	rayleigh_damping_factor
397	ENDIF
398	ENDIF
399	IF ( neutral ) WRITE ( io, 131 ) pt_surface
400	IF ( humidity ) THEN
401	IF ( .NOT. cloud_physics ) THEN
402	WRITE ( io, 129 )
403	ELSE
404	WRITE ( io, 130 )
405	ENDIF
406	ENDIF
407	IF ( passive_scalar ) WRITE ( io, 134 )
408	IF ( conserve_volume_flow ) THEN
409	WRITE ( io, 150 ) conserve_volume_flow_mode
410	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
411	WRITE ( io, 151 ) u_bulk, v_bulk
412	ENDIF
413	ELSEIF ( dp_external ) THEN
414	IF ( dp_smooth ) THEN
415	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
416	ELSE
417	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
418	ENDIF
419	ENDIF
420	IF ( large_scale_subsidence ) THEN
421	WRITE ( io, 153 )
422	WRITE ( io, 154 )
423	ENDIF
424	WRITE ( io, 99 )
425
426	!
427	!-- Runtime and timestep informations
428	WRITE ( io, 200 )
429	IF ( .NOT. dt_fixed ) THEN
430	WRITE ( io, 201 ) dt_max, cfl_factor
431	ELSE
432	WRITE ( io, 202 ) dt
433	ENDIF
434	WRITE ( io, 203 ) simulated_time_at_begin, end_time
435
436	IF ( time_restart /= 9999999.9 .AND. &
437	simulated_time_at_begin == simulated_time ) THEN
438	IF ( dt_restart == 9999999.9 ) THEN
439	WRITE ( io, 204 ) ' Restart at: ',time_restart
440	ELSE
441	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
442	ENDIF
443	ENDIF
444
445	IF ( simulated_time_at_begin /= simulated_time ) THEN
446	i = MAX ( log_point_s(10)%counts, 1 )
447	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
448	cpuseconds_per_simulated_second = 0.0
449	ELSE
450	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
451	( simulated_time - &
452	simulated_time_at_begin )
453	ENDIF
454	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
455	log_point_s(10)%sum / REAL( i ), &
456	cpuseconds_per_simulated_second
457	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
458	IF ( dt_restart == 9999999.9 ) THEN
459	WRITE ( io, 204 ) ' Next restart at: ',time_restart
460	ELSE
461	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
462	ENDIF
463	ENDIF
464	ENDIF
465
466	!
467	!-- Start time for coupled runs, if independent precursor runs for atmosphere
468	!-- and ocean are used or have been used. In this case, coupling_start_time
469	!-- defines the time when the coupling is switched on.
470	IF ( coupling_start_time /= 0.0 ) THEN
471	WRITE ( io, 207 ) coupling_start_time
472	ENDIF
473
474	!
475	!-- Computational grid
476	IF ( .NOT. ocean ) THEN
477	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
478	IF ( dz_stretch_level_index < nzt+1 ) THEN
479	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
480	dz_stretch_factor, dz_max
481	ENDIF
482	ELSE
483	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
484	IF ( dz_stretch_level_index > 0 ) THEN
485	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
486	dz_stretch_factor, dz_max
487	ENDIF
488	ENDIF
489	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
490	MIN( nnz+2, nzt+2 )
491	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
492
493	!
494	!-- Topography
495	WRITE ( io, 270 ) topography
496	SELECT CASE ( TRIM( topography ) )
497
498	CASE ( 'flat' )
499	! no actions necessary
500
501	CASE ( 'single_building' )
502	blx = INT( building_length_x / dx )
503	bly = INT( building_length_y / dy )
504	bh = INT( building_height / dz )
505
506	IF ( building_wall_left == 9999999.9 ) THEN
507	building_wall_left = ( nx + 1 - blx ) / 2 * dx
508	ENDIF
509	bxl = INT ( building_wall_left / dx + 0.5 )
510	bxr = bxl + blx
511
512	IF ( building_wall_south == 9999999.9 ) THEN
513	building_wall_south = ( ny + 1 - bly ) / 2 * dy
514	ENDIF
515	bys = INT ( building_wall_south / dy + 0.5 )
516	byn = bys + bly
517
518	WRITE ( io, 271 ) building_length_x, building_length_y, &
519	building_height, bxl, bxr, bys, byn
520
521	CASE ( 'single_street_canyon' )
522	ch = NINT( canyon_height / dz )
523	IF ( canyon_width_x /= 9999999.9 ) THEN
524	!
525	!-- Street canyon in y direction
526	cwx = NINT( canyon_width_x / dx )
527	IF ( canyon_wall_left == 9999999.9 ) THEN
528	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
529	ENDIF
530	cxl = NINT( canyon_wall_left / dx )
531	cxr = cxl + cwx
532	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
533
534	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
535	!
536	!-- Street canyon in x direction
537	cwy = NINT( canyon_width_y / dy )
538	IF ( canyon_wall_south == 9999999.9 ) THEN
539	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
540	ENDIF
541	cys = NINT( canyon_wall_south / dy )
542	cyn = cys + cwy
543	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
544	ENDIF
545
546	END SELECT
547
548	IF ( TRIM( topography ) /= 'flat' ) THEN
549	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
550	IF ( TRIM( topography ) == 'single_building' .OR. &
551	TRIM( topography ) == 'single_street_canyon' ) THEN
552	WRITE ( io, 278 )
553	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
554	WRITE ( io, 279 )
555	ENDIF
556	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
557	WRITE ( io, 278 )
558	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
559	WRITE ( io, 279 )
560	ENDIF
561	ENDIF
562
563	IF ( plant_canopy ) THEN
564
565	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
566	IF ( passive_scalar ) THEN
567	WRITE ( io, 281 ) scalar_exchange_coefficient, &
568	leaf_surface_concentration
569	ENDIF
570
571	!
572	!-- Heat flux at the top of vegetation
573	WRITE ( io, 282 ) cthf
574
575	!
576	!-- Leaf area density profile
577	!-- Building output strings, starting with surface value
578	WRITE ( learde, '(F6.4)' ) lad_surface
579	gradients = '------'
580	slices = ' 0'
581	coordinates = ' 0.0'
582	i = 1
583	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
584
585	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
586	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
587
588	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
589	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
590
591	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
592	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
593
594	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
595	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
596
597	i = i + 1
598	ENDDO
599
600	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
601	TRIM( gradients ), TRIM( slices )
602
603	ENDIF
604
605	!
606	!-- Boundary conditions
607	IF ( ibc_p_b == 0 ) THEN
608	runten = 'p(0) = 0 \|'
609	ELSEIF ( ibc_p_b == 1 ) THEN
610	runten = 'p(0) = p(1) \|'
611	ENDIF
612	IF ( ibc_p_t == 0 ) THEN
613	roben = 'p(nzt+1) = 0 \|'
614	ELSE
615	roben = 'p(nzt+1) = p(nzt) \|'
616	ENDIF
617
618	IF ( ibc_uv_b == 0 ) THEN
619	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
620	ELSE
621	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
622	ENDIF
623	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
624	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
625	ELSEIF ( ibc_uv_t == 0 ) THEN
626	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
627	ELSE
628	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
629	ENDIF
630
631	IF ( ibc_pt_b == 0 ) THEN
632	runten = TRIM( runten ) // ' pt(0) = pt_surface'
633	ELSEIF ( ibc_pt_b == 1 ) THEN
634	runten = TRIM( runten ) // ' pt(0) = pt(1)'
635	ELSEIF ( ibc_pt_b == 2 ) THEN
636	runten = TRIM( runten ) // ' pt(0) = from coupled model'
637	ENDIF
638	IF ( ibc_pt_t == 0 ) THEN
639	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
640	ELSEIF( ibc_pt_t == 1 ) THEN
641	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
642	ELSEIF( ibc_pt_t == 2 ) THEN
643	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
644
645	ENDIF
646
647	WRITE ( io, 300 ) runten, roben
648
649	IF ( .NOT. constant_diffusion ) THEN
650	IF ( ibc_e_b == 1 ) THEN
651	runten = 'e(0) = e(1)'
652	ELSE
653	runten = 'e(0) = e(1) = (u/0.1)*2'
654	ENDIF
655	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
656
657	WRITE ( io, 301 ) 'e', runten, roben
658
659	ENDIF
660
661	IF ( ocean ) THEN
662	runten = 'sa(0) = sa(1)'
663	IF ( ibc_sa_t == 0 ) THEN
664	roben = 'sa(nzt+1) = sa_surface'
665	ELSE
666	roben = 'sa(nzt+1) = sa(nzt)'
667	ENDIF
668	WRITE ( io, 301 ) 'sa', runten, roben
669	ENDIF
670
671	IF ( humidity ) THEN
672	IF ( ibc_q_b == 0 ) THEN
673	runten = 'q(0) = q_surface'
674	ELSE
675	runten = 'q(0) = q(1)'
676	ENDIF
677	IF ( ibc_q_t == 0 ) THEN
678	roben = 'q(nzt) = q_top'
679	ELSE
680	roben = 'q(nzt) = q(nzt-1) + dq/dz'
681	ENDIF
682	WRITE ( io, 301 ) 'q', runten, roben
683	ENDIF
684
685	IF ( passive_scalar ) THEN
686	IF ( ibc_q_b == 0 ) THEN
687	runten = 's(0) = s_surface'
688	ELSE
689	runten = 's(0) = s(1)'
690	ENDIF
691	IF ( ibc_q_t == 0 ) THEN
692	roben = 's(nzt) = s_top'
693	ELSE
694	roben = 's(nzt) = s(nzt-1) + ds/dz'
695	ENDIF
696	WRITE ( io, 301 ) 's', runten, roben
697	ENDIF
698
699	IF ( use_surface_fluxes ) THEN
700	WRITE ( io, 303 )
701	IF ( constant_heatflux ) THEN
702	WRITE ( io, 306 ) surface_heatflux
703	IF ( random_heatflux ) WRITE ( io, 307 )
704	ENDIF
705	IF ( humidity .AND. constant_waterflux ) THEN
706	WRITE ( io, 311 ) surface_waterflux
707	ENDIF
708	IF ( passive_scalar .AND. constant_waterflux ) THEN
709	WRITE ( io, 313 ) surface_waterflux
710	ENDIF
711	ENDIF
712
713	IF ( use_top_fluxes ) THEN
714	WRITE ( io, 304 )
715	IF ( coupling_mode == 'uncoupled' ) THEN
716	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
717	IF ( constant_top_heatflux ) THEN
718	WRITE ( io, 306 ) top_heatflux
719	ENDIF
720	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
721	WRITE ( io, 316 )
722	ENDIF
723	IF ( ocean .AND. constant_top_salinityflux ) THEN
724	WRITE ( io, 309 ) top_salinityflux
725	ENDIF
726	IF ( humidity .OR. passive_scalar ) THEN
727	WRITE ( io, 315 )
728	ENDIF
729	ENDIF
730
731	IF ( prandtl_layer ) THEN
732	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
733	z0h_factor*roughness_length, kappa, &
734	rif_min, rif_max
735	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
736	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
737	WRITE ( io, 312 )
738	ENDIF
739	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
740	WRITE ( io, 314 )
741	ENDIF
742	ELSE
743	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
744	WRITE ( io, 310 ) rif_min, rif_max
745	ENDIF
746	ENDIF
747
748	WRITE ( io, 317 ) bc_lr, bc_ns
749	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
750	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
751	IF ( turbulent_inflow ) THEN
752	WRITE ( io, 319 ) recycling_width, recycling_plane, &
753	inflow_damping_height, inflow_damping_width
754	ENDIF
755	ENDIF
756
757	!
758	!-- Listing of 1D-profiles
759	WRITE ( io, 325 ) dt_dopr_listing
760	IF ( averaging_interval_pr /= 0.0 ) THEN
761	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
762	ENDIF
763
764	!
765	!-- DATA output
766	WRITE ( io, 330 )
767	IF ( averaging_interval_pr /= 0.0 ) THEN
768	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
769	ENDIF
770
771	!
772	!-- 1D-profiles
773	dopr_chr = 'Profile:'
774	IF ( dopr_n /= 0 ) THEN
775	WRITE ( io, 331 )
776
777	output_format = ''
778	IF ( netcdf_output ) THEN
779	output_format = output_format_netcdf
780	ENDIF
781	WRITE ( io, 344 ) output_format
782
783	DO i = 1, dopr_n
784	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
785	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
786	WRITE ( io, 332 ) dopr_chr
787	dopr_chr = ' :'
788	ENDIF
789	ENDDO
790
791	IF ( dopr_chr /= '' ) THEN
792	WRITE ( io, 332 ) dopr_chr
793	ENDIF
794	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
795	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
796	ENDIF
797
798	!
799	!-- 2D-arrays
800	DO av = 0, 1
801
802	i = 1
803	do2d_xy = ''
804	do2d_xz = ''
805	do2d_yz = ''
806	DO WHILE ( do2d(av,i) /= ' ' )
807
808	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
809	do2d_mode = do2d(av,i)(l-1:l)
810
811	SELECT CASE ( do2d_mode )
812	CASE ( 'xy' )
813	ll = LEN_TRIM( do2d_xy )
814	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
815	CASE ( 'xz' )
816	ll = LEN_TRIM( do2d_xz )
817	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
818	CASE ( 'yz' )
819	ll = LEN_TRIM( do2d_yz )
820	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
821	END SELECT
822
823	i = i + 1
824
825	ENDDO
826
827	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
828	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
829	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
830	( netcdf_output .OR. iso2d_output ) ) THEN
831
832	IF ( av == 0 ) THEN
833	WRITE ( io, 334 ) ''
834	ELSE
835	WRITE ( io, 334 ) '(time-averaged)'
836	ENDIF
837
838	IF ( do2d_at_begin ) THEN
839	begin_chr = 'and at the start'
840	ELSE
841	begin_chr = ''
842	ENDIF
843
844	output_format = ''
845	IF ( netcdf_output ) THEN
846	output_format = output_format_netcdf
847	ENDIF
848	IF ( iso2d_output ) THEN
849	IF ( netcdf_output ) THEN
850	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
851	ELSE
852	output_format = 'iso2d'
853	ENDIF
854	ENDIF
855	WRITE ( io, 344 ) output_format
856
857	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
858	i = 1
859	slices = '/'
860	coordinates = '/'
861	!
862	!-- Building strings with index and coordinate informations of the
863	!-- slices
864	DO WHILE ( section(i,1) /= -9999 )
865
866	WRITE (section_chr,'(I5)') section(i,1)
867	section_chr = ADJUSTL( section_chr )
868	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
869
870	IF ( section(i,1) == -1 ) THEN
871	WRITE (coor_chr,'(F10.1)') -1.0
872	ELSE
873	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
874	ENDIF
875	coor_chr = ADJUSTL( coor_chr )
876	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
877
878	i = i + 1
879	ENDDO
880	IF ( av == 0 ) THEN
881	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
882	TRIM( begin_chr ), 'k', TRIM( slices ), &
883	TRIM( coordinates )
884	IF ( skip_time_do2d_xy /= 0.0 ) THEN
885	WRITE ( io, 339 ) skip_time_do2d_xy
886	ENDIF
887	ELSE
888	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
889	TRIM( begin_chr ), averaging_interval, &
890	dt_averaging_input, 'k', TRIM( slices ), &
891	TRIM( coordinates )
892	IF ( skip_time_data_output_av /= 0.0 ) THEN
893	WRITE ( io, 339 ) skip_time_data_output_av
894	ENDIF
895	ENDIF
896
897	ENDIF
898
899	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
900	i = 1
901	slices = '/'
902	coordinates = '/'
903	!
904	!-- Building strings with index and coordinate informations of the
905	!-- slices
906	DO WHILE ( section(i,2) /= -9999 )
907
908	WRITE (section_chr,'(I5)') section(i,2)
909	section_chr = ADJUSTL( section_chr )
910	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
911
912	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
913	coor_chr = ADJUSTL( coor_chr )
914	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
915
916	i = i + 1
917	ENDDO
918	IF ( av == 0 ) THEN
919	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
920	TRIM( begin_chr ), 'j', TRIM( slices ), &
921	TRIM( coordinates )
922	IF ( skip_time_do2d_xz /= 0.0 ) THEN
923	WRITE ( io, 339 ) skip_time_do2d_xz
924	ENDIF
925	ELSE
926	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
927	TRIM( begin_chr ), averaging_interval, &
928	dt_averaging_input, 'j', TRIM( slices ), &
929	TRIM( coordinates )
930	IF ( skip_time_data_output_av /= 0.0 ) THEN
931	WRITE ( io, 339 ) skip_time_data_output_av
932	ENDIF
933	ENDIF
934	ENDIF
935
936	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
937	i = 1
938	slices = '/'
939	coordinates = '/'
940	!
941	!-- Building strings with index and coordinate informations of the
942	!-- slices
943	DO WHILE ( section(i,3) /= -9999 )
944
945	WRITE (section_chr,'(I5)') section(i,3)
946	section_chr = ADJUSTL( section_chr )
947	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
948
949	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
950	coor_chr = ADJUSTL( coor_chr )
951	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
952
953	i = i + 1
954	ENDDO
955	IF ( av == 0 ) THEN
956	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
957	TRIM( begin_chr ), 'i', TRIM( slices ), &
958	TRIM( coordinates )
959	IF ( skip_time_do2d_yz /= 0.0 ) THEN
960	WRITE ( io, 339 ) skip_time_do2d_yz
961	ENDIF
962	ELSE
963	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
964	TRIM( begin_chr ), averaging_interval, &
965	dt_averaging_input, 'i', TRIM( slices ), &
966	TRIM( coordinates )
967	IF ( skip_time_data_output_av /= 0.0 ) THEN
968	WRITE ( io, 339 ) skip_time_data_output_av
969	ENDIF
970	ENDIF
971	ENDIF
972
973	ENDIF
974
975	ENDDO
976
977	!
978	!-- 3d-arrays
979	DO av = 0, 1
980
981	i = 1
982	do3d_chr = ''
983	DO WHILE ( do3d(av,i) /= ' ' )
984
985	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
986	i = i + 1
987
988	ENDDO
989
990	IF ( do3d_chr /= '' ) THEN
991	IF ( av == 0 ) THEN
992	WRITE ( io, 336 ) ''
993	ELSE
994	WRITE ( io, 336 ) '(time-averaged)'
995	ENDIF
996
997	output_format = ''
998	IF ( netcdf_output ) THEN
999	output_format = output_format_netcdf
1000	ENDIF
1001	IF ( avs_output ) THEN
1002	IF ( netcdf_output ) THEN
1003	output_format = TRIM( output_format_netcdf ) // ' and avs'
1004	ELSE
1005	output_format = 'avs'
1006	ENDIF
1007	ENDIF
1008	WRITE ( io, 344 ) output_format
1009
1010	IF ( do3d_at_begin ) THEN
1011	begin_chr = 'and at the start'
1012	ELSE
1013	begin_chr = ''
1014	ENDIF
1015	IF ( av == 0 ) THEN
1016	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1017	zu(nz_do3d), nz_do3d
1018	ELSE
1019	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1020	TRIM( begin_chr ), averaging_interval, &
1021	dt_averaging_input, zu(nz_do3d), nz_do3d
1022	ENDIF
1023
1024	IF ( do3d_compress ) THEN
1025	do3d_chr = ''
1026	i = 1
1027	DO WHILE ( do3d(av,i) /= ' ' )
1028
1029	SELECT CASE ( do3d(av,i) )
1030	CASE ( 'u' )
1031	j = 1
1032	CASE ( 'v' )
1033	j = 2
1034	CASE ( 'w' )
1035	j = 3
1036	CASE ( 'p' )
1037	j = 4
1038	CASE ( 'pt' )
1039	j = 5
1040	END SELECT
1041	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1042	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1043	':' // prec // ','
1044	i = i + 1
1045
1046	ENDDO
1047	WRITE ( io, 338 ) do3d_chr
1048
1049	ENDIF
1050
1051	IF ( av == 0 ) THEN
1052	IF ( skip_time_do3d /= 0.0 ) THEN
1053	WRITE ( io, 339 ) skip_time_do3d
1054	ENDIF
1055	ELSE
1056	IF ( skip_time_data_output_av /= 0.0 ) THEN
1057	WRITE ( io, 339 ) skip_time_data_output_av
1058	ENDIF
1059	ENDIF
1060
1061	ENDIF
1062
1063	ENDDO
1064
1065	!
1066	!-- masked arrays
1067	IF ( masks > 0 ) WRITE ( io, 345 ) &
1068	mask_scale_x, mask_scale_y, mask_scale_z
1069	DO mid = 1, masks
1070	DO av = 0, 1
1071
1072	i = 1
1073	domask_chr = ''
1074	DO WHILE ( domask(mid,av,i) /= ' ' )
1075	domask_chr = TRIM( domask_chr ) // ' ' // &
1076	TRIM( domask(mid,av,i) ) // ','
1077	i = i + 1
1078	ENDDO
1079
1080	IF ( domask_chr /= '' ) THEN
1081	IF ( av == 0 ) THEN
1082	WRITE ( io, 346 ) '', mid
1083	ELSE
1084	WRITE ( io, 346 ) ' (time-averaged)', mid
1085	ENDIF
1086
1087	output_format = ' '
1088	IF ( netcdf_output ) THEN
1089	output_format = output_format_netcdf
1090	ENDIF
1091	WRITE ( io, 344 ) output_format
1092
1093	IF ( av == 0 ) THEN
1094	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1095	ELSE
1096	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1097	averaging_interval, dt_averaging_input
1098	ENDIF
1099
1100	IF ( av == 0 ) THEN
1101	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1102	WRITE ( io, 339 ) skip_time_domask(mid)
1103	ENDIF
1104	ELSE
1105	IF ( skip_time_data_output_av /= 0.0 ) THEN
1106	WRITE ( io, 339 ) skip_time_data_output_av
1107	ENDIF
1108	ENDIF
1109	!
1110	!-- output locations
1111	DO dim = 1, 3
1112	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1113	count = 0
1114	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1115	count = count + 1
1116	ENDDO
1117	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1118	mask(mid,dim,:count)
1119	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1120	mask_loop(mid,dim,2) < 0.0 .AND. &
1121	mask_loop(mid,dim,3) == 0.0 ) THEN
1122	WRITE ( io, 350 ) dir(dim), dir(dim)
1123	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1124	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1125	mask_loop(mid,dim,1:2)
1126	ELSE
1127	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1128	mask_loop(mid,dim,1:3)
1129	ENDIF
1130	ENDDO
1131	ENDIF
1132
1133	ENDDO
1134	ENDDO
1135
1136	!
1137	!-- Timeseries
1138	IF ( dt_dots /= 9999999.9 ) THEN
1139	WRITE ( io, 340 )
1140
1141	output_format = ''
1142	IF ( netcdf_output ) THEN
1143	output_format = output_format_netcdf
1144	ENDIF
1145	WRITE ( io, 344 ) output_format
1146	WRITE ( io, 341 ) dt_dots
1147	ENDIF
1148
1149	#if defined( __dvrp_graphics )
1150	!
1151	!-- Dvrp-output
1152	IF ( dt_dvrp /= 9999999.9 ) THEN
1153	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1154	TRIM( dvrp_username ), TRIM( dvrp_directory )
1155	i = 1
1156	l = 0
1157	m = 0
1158	DO WHILE ( mode_dvrp(i) /= ' ' )
1159	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1160	READ ( mode_dvrp(i), '(10X,I2)' ) j
1161	l = l + 1
1162	IF ( do3d(0,j) /= ' ' ) THEN
1163	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1164	isosurface_color(:,l)
1165	ENDIF
1166	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1167	READ ( mode_dvrp(i), '(6X,I2)' ) j
1168	m = m + 1
1169	IF ( do2d(0,j) /= ' ' ) THEN
1170	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1171	slicer_range_limits_dvrp(:,m)
1172	ENDIF
1173	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1174	WRITE ( io, 363 ) dvrp_psize
1175	IF ( particle_dvrpsize /= 'none' ) THEN
1176	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1177	dvrpsize_interval
1178	ENDIF
1179	IF ( particle_color /= 'none' ) THEN
1180	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1181	color_interval
1182	ENDIF
1183	ENDIF
1184	i = i + 1
1185	ENDDO
1186
1187	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1188	superelevation_y, superelevation, clip_dvrp_l, &
1189	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1190
1191	IF ( TRIM( topography ) /= 'flat' ) THEN
1192	WRITE ( io, 366 ) topography_color
1193	IF ( cluster_size > 1 ) THEN
1194	WRITE ( io, 367 ) cluster_size
1195	ENDIF
1196	ENDIF
1197
1198	ENDIF
1199	#endif
1200
1201	#if defined( __spectra )
1202	!
1203	!-- Spectra output
1204	IF ( dt_dosp /= 9999999.9 ) THEN
1205	WRITE ( io, 370 )
1206
1207	output_format = ' '
1208	IF ( netcdf_output ) THEN
1209	output_format = output_format_netcdf
1210	ENDIF
1211	WRITE ( io, 344 ) output_format
1212	WRITE ( io, 371 ) dt_dosp
1213	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1214	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1215	( spectra_direction(i), i = 1,10 ), &
1216	( comp_spectra_level(i), i = 1,100 ), &
1217	( plot_spectra_level(i), i = 1,100 ), &
1218	averaging_interval_sp, dt_averaging_input_pr
1219	ENDIF
1220	#endif
1221
1222	WRITE ( io, 99 )
1223
1224	!
1225	!-- Physical quantities
1226	WRITE ( io, 400 )
1227
1228	!
1229	!-- Geostrophic parameters
1230	WRITE ( io, 410 ) omega, phi, f, fs
1231
1232	!
1233	!-- Other quantities
1234	WRITE ( io, 411 ) g
1235	WRITE ( io, 412 ) TRIM( reference_state )
1236	IF ( use_single_reference_value ) THEN
1237	IF ( ocean ) THEN
1238	WRITE ( io, 413 ) prho_reference
1239	ELSE
1240	WRITE ( io, 414 ) pt_reference
1241	ENDIF
1242	ENDIF
1243
1244	!
1245	!-- Cloud physics parameters
1246	IF ( cloud_physics ) THEN
1247	WRITE ( io, 415 )
1248	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1249	IF ( icloud_scheme == 0 ) THEN
1250	WRITE ( io, 510 ) 1.0E-6 * nc_const
1251	IF ( precipitation ) WRITE ( io, 511 ) c_sedimentation
1252	ENDIF
1253	ENDIF
1254
1255	!-- Profile of the geostrophic wind (component ug)
1256	!-- Building output strings
1257	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1258	gradients = '------'
1259	slices = ' 0'
1260	coordinates = ' 0.0'
1261	i = 1
1262	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1263
1264	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1265	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1266
1267	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1268	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1269
1270	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1271	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1272
1273	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1274	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1275
1276	IF ( i == 10 ) THEN
1277	EXIT
1278	ELSE
1279	i = i + 1
1280	ENDIF
1281
1282	ENDDO
1283
1284	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1285	TRIM( gradients ), TRIM( slices )
1286
1287	!-- Profile of the geostrophic wind (component vg)
1288	!-- Building output strings
1289	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1290	gradients = '------'
1291	slices = ' 0'
1292	coordinates = ' 0.0'
1293	i = 1
1294	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1295
1296	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1297	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1298
1299	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1300	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1301
1302	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1303	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1304
1305	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1306	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1307
1308	IF ( i == 10 ) THEN
1309	EXIT
1310	ELSE
1311	i = i + 1
1312	ENDIF
1313
1314	ENDDO
1315
1316	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1317	TRIM( gradients ), TRIM( slices )
1318
1319	!
1320	!-- Initial wind profiles
1321	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1322
1323	!
1324	!-- Initial temperature profile
1325	!-- Building output strings, starting with surface temperature
1326	WRITE ( temperatures, '(F6.2)' ) pt_surface
1327	gradients = '------'
1328	slices = ' 0'
1329	coordinates = ' 0.0'
1330	i = 1
1331	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1332
1333	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1334	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1335
1336	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1337	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1338
1339	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1340	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1341
1342	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1343	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1344
1345	IF ( i == 10 ) THEN
1346	EXIT
1347	ELSE
1348	i = i + 1
1349	ENDIF
1350
1351	ENDDO
1352
1353	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1354	TRIM( gradients ), TRIM( slices )
1355
1356	!
1357	!-- Initial humidity profile
1358	!-- Building output strings, starting with surface humidity
1359	IF ( humidity .OR. passive_scalar ) THEN
1360	WRITE ( temperatures, '(E8.1)' ) q_surface
1361	gradients = '--------'
1362	slices = ' 0'
1363	coordinates = ' 0.0'
1364	i = 1
1365	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1366
1367	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1368	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1369
1370	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1371	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1372
1373	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1374	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1375
1376	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1377	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1378
1379	IF ( i == 10 ) THEN
1380	EXIT
1381	ELSE
1382	i = i + 1
1383	ENDIF
1384
1385	ENDDO
1386
1387	IF ( humidity ) THEN
1388	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1389	TRIM( gradients ), TRIM( slices )
1390	ELSE
1391	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1392	TRIM( gradients ), TRIM( slices )
1393	ENDIF
1394	ENDIF
1395
1396	!
1397	!-- Initial salinity profile
1398	!-- Building output strings, starting with surface salinity
1399	IF ( ocean ) THEN
1400	WRITE ( temperatures, '(F6.2)' ) sa_surface
1401	gradients = '------'
1402	slices = ' 0'
1403	coordinates = ' 0.0'
1404	i = 1
1405	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1406
1407	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1408	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1409
1410	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1411	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1412
1413	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1414	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1415
1416	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1417	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1418
1419	IF ( i == 10 ) THEN
1420	EXIT
1421	ELSE
1422	i = i + 1
1423	ENDIF
1424
1425	ENDDO
1426
1427	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1428	TRIM( gradients ), TRIM( slices )
1429	ENDIF
1430
1431	!
1432	!-- Profile for the large scale vertial velocity
1433	!-- Building output strings, starting with surface value
1434	IF ( large_scale_subsidence ) THEN
1435	temperatures = ' 0.0'
1436	gradients = '------'
1437	slices = ' 0'
1438	coordinates = ' 0.0'
1439	i = 1
1440	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1441
1442	WRITE (coor_chr,'(E10.2,7X)') &
1443	w_subs(subs_vertical_gradient_level_i(i))
1444	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1445
1446	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1447	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1448
1449	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1450	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1451
1452	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1453	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1454
1455	IF ( i == 10 ) THEN
1456	EXIT
1457	ELSE
1458	i = i + 1
1459	ENDIF
1460
1461	ENDDO
1462
1463	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1464	TRIM( gradients ), TRIM( slices )
1465	ENDIF
1466
1467	!
1468	!-- Cloud physcis parameters / quantities / numerical methods
1469	WRITE ( io, 430 )
1470	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1471	WRITE ( io, 431 )
1472	ELSEIF ( humidity .AND. cloud_physics ) THEN
1473	WRITE ( io, 432 )
1474	IF ( radiation ) WRITE ( io, 132 )
1475	IF ( icloud_scheme == 1 ) THEN
1476	IF ( precipitation ) WRITE ( io, 133 )
1477	ELSEIF ( icloud_scheme == 0 ) THEN
1478	IF ( drizzle ) WRITE ( io, 506 )
1479	IF ( precipitation ) THEN
1480	WRITE ( io, 505 )
1481	IF ( turbulence ) WRITE ( io, 507 )
1482	IF ( ventilation_effect ) WRITE ( io, 508 )
1483	IF ( limiter_sedimentation ) WRITE ( io, 509 )
1484	ENDIF
1485	ENDIF
1486	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1487	WRITE ( io, 433 )
1488	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1489	IF ( collision_kernel /= 'none' ) THEN
1490	WRITE ( io, 435 ) TRIM( collision_kernel )
1491	IF ( collision_kernel(6:9) == 'fast' ) THEN
1492	WRITE ( io, 436 ) radius_classes, dissipation_classes
1493	ENDIF
1494	ELSE
1495	WRITE ( io, 437 )
1496	ENDIF
1497	ENDIF
1498
1499	!
1500	!-- LES / turbulence parameters
1501	WRITE ( io, 450 )
1502
1503	!--
1504	! ... LES-constants used must still be added here
1505	!--
1506	IF ( constant_diffusion ) THEN
1507	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1508	prandtl_number
1509	ENDIF
1510	IF ( .NOT. constant_diffusion) THEN
1511	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1512	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1513	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1514	ENDIF
1515
1516	!
1517	!-- Special actions during the run
1518	WRITE ( io, 470 )
1519	IF ( create_disturbances ) THEN
1520	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1521	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1522	zu(disturbance_level_ind_t), disturbance_level_ind_t
1523	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1524	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1525	ELSE
1526	WRITE ( io, 473 ) disturbance_energy_limit
1527	ENDIF
1528	WRITE ( io, 474 ) TRIM( random_generator )
1529	ENDIF
1530	IF ( pt_surface_initial_change /= 0.0 ) THEN
1531	WRITE ( io, 475 ) pt_surface_initial_change
1532	ENDIF
1533	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1534	WRITE ( io, 476 ) q_surface_initial_change
1535	ENDIF
1536	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1537	WRITE ( io, 477 ) q_surface_initial_change
1538	ENDIF
1539
1540	IF ( particle_advection ) THEN
1541	!
1542	!-- Particle attributes
1543	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1544	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1545	end_time_prel, dt_sort_particles
1546	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1547	IF ( random_start_position ) WRITE ( io, 481 )
1548	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1549	WRITE ( io, 495 ) total_number_of_particles
1550	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1551	WRITE ( io, 483 ) maximum_number_of_tailpoints
1552	IF ( minimum_tailpoint_distance /= 0 ) THEN
1553	WRITE ( io, 484 ) total_number_of_tails, &
1554	minimum_tailpoint_distance, &
1555	maximum_tailpoint_age
1556	ENDIF
1557	ENDIF
1558	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1559	WRITE ( io, 485 ) dt_write_particle_data
1560	output_format = ' '
1561	IF ( netcdf_output ) THEN
1562	IF ( netcdf_data_format > 1 ) THEN
1563	output_format = 'netcdf (64 bit offset) and binary'
1564	ELSE
1565	output_format = 'netcdf and binary'
1566	ENDIF
1567	ELSE
1568	output_format = 'binary'
1569	ENDIF
1570	WRITE ( io, 344 ) output_format
1571	ENDIF
1572	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1573	IF ( write_particle_statistics ) WRITE ( io, 486 )
1574
1575	WRITE ( io, 487 ) number_of_particle_groups
1576
1577	DO i = 1, number_of_particle_groups
1578	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1579	WRITE ( io, 490 ) i, 0.0
1580	WRITE ( io, 492 )
1581	ELSE
1582	WRITE ( io, 490 ) i, radius(i)
1583	IF ( density_ratio(i) /= 0.0 ) THEN
1584	WRITE ( io, 491 ) density_ratio(i)
1585	ELSE
1586	WRITE ( io, 492 )
1587	ENDIF
1588	ENDIF
1589	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1590	pdx(i), pdy(i), pdz(i)
1591	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1592	ENDDO
1593
1594	ENDIF
1595
1596
1597	!
1598	!-- Parameters of 1D-model
1599	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1600	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1601	mixing_length_1d, dissipation_1d
1602	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1603	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1604	ENDIF
1605	ENDIF
1606
1607	!
1608	!-- User-defined informations
1609	CALL user_header( io )
1610
1611	WRITE ( io, 99 )
1612
1613	!
1614	!-- Write buffer contents to disc immediately
1615	CALL local_flush( io )
1616
1617	!
1618	!-- Here the FORMATs start
1619
1620	99 FORMAT (1X,78('-'))
1621	100 FORMAT (/1X,'******************************',6X,42('-')/ &
1622	1X,'* ',A,' *',6X,A/ &
1623	1X,'******************************',6X,42('-'))
1624	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1625	37X,42('-'))
1626	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
1627	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
1628	' Run on host: ',A10)
1629	#if defined( __parallel )
1630	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
1631	')',1X,A)
1632	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1633	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1634	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1635	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1636	37X,'because the job is running on an SMP-cluster')
1637	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1638	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1639	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
1640	37X,42('-'))
1641	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
1642	37X,'independent precursor runs'/ &
1643	37X,42('-'))
1644	117 FORMAT (' Accelerator boards / node: ',I2)
1645	#endif
1646	110 FORMAT (/' Numerical Schemes:'/ &
1647	' -----------------'/)
1648	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1649	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1650	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1651	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1652	' or Upstream')
1653	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1654	' or Upstream')
1655	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1656	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1657	' translation velocity = ',A/ &
1658	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1659	120 FORMAT (' Accelerator boards: ',8X,I2)
1660	122 FORMAT (' --> Time differencing scheme: ',A)
1661	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1662	' maximum damping coefficient: ',F5.3, ' 1/s')
1663	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1664	130 FORMAT (' --> Additional prognostic equation for the total water content')
1665	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1666	F6.2, ' K assumed')
1667	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1668	' effective emissivity scheme')
1669	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1670	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1671	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1672	A,'-cycle)'/ &
1673	' number of grid levels: ',I2/ &
1674	' Gauss-Seidel red/black iterations: ',I2)
1675	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1676	I3,')')
1677	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1678	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1679	I3,')'/ &
1680	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1681	I3,')')
1682	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1683	139 FORMAT (' --> Loop optimization method: ',A)
1684	140 FORMAT (' maximum residual allowed: ',E10.3)
1685	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1686	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1687	'step')
1688	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1689	'kinetic energy')
1690	144 FORMAT (' masking method is used')
1691	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1692	'conserved'/ &
1693	' using the ',A,' mode')
1694	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1695	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1696	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1697	/' starting from dp_level_b =', F8.3, 'm', A /)
1698	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1699	'prognostic equation for')
1700	154 FORMAT (' the potential temperature')
1701	200 FORMAT (//' Run time and time step information:'/ &
1702	' ----------------------------------'/)
1703	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1704	' CFL-factor: ',F4.2)
1705	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1706	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1707	' End time: ',F9.3,' s')
1708	204 FORMAT ( A,F9.3,' s')
1709	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1710	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1711	' CPU-time used: ',F9.3,' s per timestep: ', &
1712	' ',F9.3,' s'/ &
1713	' per second of simulated tim', &
1714	'e: ',F9.3,' s')
1715	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1716	250 FORMAT (//' Computational grid and domain size:'/ &
1717	' ----------------------------------'// &
1718	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1719	' m dz = ',F7.3,' m'/ &
1720	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1721	' m z(u) = ',F10.3,' m'/)
1722	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1723	' factor: ',F5.3/ &
1724	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1725	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1726	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1727	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1728	' degrees')
1729	270 FORMAT (//' Topography informations:'/ &
1730	' -----------------------'// &
1731	1X,'Topography: ',A)
1732	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1733	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1734	' / ',I4)
1735	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1736	' direction' / &
1737	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1738	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1739	278 FORMAT (' Topography grid definition convention:'/ &
1740	' cell edge (staggered grid points'/ &
1741	' (u in x-direction, v in y-direction))' /)
1742	279 FORMAT (' Topography grid definition convention:'/ &
1743	' cell center (scalar grid points)' /)
1744	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1745	' ------------------------------'// &
1746	' Canopy mode: ', A / &
1747	' Canopy top: ',I4 / &
1748	' Leaf drag coefficient: ',F6.2 /)
1749	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1750	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1751	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1752	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1753	' Height: ',A,' m'/ &
1754	' Leaf area density: ',A,' m2/m3'/ &
1755	' Gradient: ',A,' m2/m4'/ &
1756	' Gridpoint: ',A)
1757
1758	300 FORMAT (//' Boundary conditions:'/ &
1759	' -------------------'// &
1760	' p uv ', &
1761	' pt'// &
1762	' B. bound.: ',A/ &
1763	' T. bound.: ',A)
1764	301 FORMAT (/' ',A// &
1765	' B. bound.: ',A/ &
1766	' T. bound.: ',A)
1767	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1768	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1769	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1770	'computational u,v-level:'// &
1771	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1772	' m kappa = ',F4.2/ &
1773	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1774	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1775	307 FORMAT (' Heatflux has a random normal distribution')
1776	308 FORMAT (' Predefined surface temperature')
1777	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1778	310 FORMAT (//' 1D-Model:'// &
1779	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1780	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1781	312 FORMAT (' Predefined surface humidity')
1782	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1783	314 FORMAT (' Predefined scalar value at the surface')
1784	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1785	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1786	'atmosphere model')
1787	317 FORMAT (//' Lateral boundaries:'/ &
1788	' left/right: ',A/ &
1789	' north/south: ',A)
1790	318 FORMAT (/' use_cmax: ',L1 / &
1791	' pt damping layer width = ',F8.2,' m, pt ', &
1792	'damping factor = ',F6.4)
1793	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1794	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1795	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1796	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1797	' v: ',F9.6,' m2/s2')
1798	325 FORMAT (//' List output:'/ &
1799	' -----------'// &
1800	' 1D-Profiles:'/ &
1801	' Output every ',F8.2,' s')
1802	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1803	' Averaging input every ',F8.2,' s')
1804	330 FORMAT (//' Data output:'/ &
1805	' -----------'/)
1806	331 FORMAT (/' 1D-Profiles:')
1807	332 FORMAT (/' ',A)
1808	333 FORMAT (' Output every ',F8.2,' s',/ &
1809	' Time averaged over ',F8.2,' s'/ &
1810	' Averaging input every ',F8.2,' s')
1811	334 FORMAT (/' 2D-Arrays',A,':')
1812	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1813	' Output every ',F8.2,' s ',A/ &
1814	' Cross sections at ',A1,' = ',A/ &
1815	' scalar-coordinates: ',A,' m'/)
1816	336 FORMAT (/' 3D-Arrays',A,':')
1817	337 FORMAT (/' Arrays: ',A/ &
1818	' Output every ',F8.2,' s ',A/ &
1819	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1820	338 FORMAT (' Compressed data output'/ &
1821	' Decimal precision: ',A/)
1822	339 FORMAT (' No output during initial ',F8.2,' s')
1823	340 FORMAT (/' Time series:')
1824	341 FORMAT (' Output every ',F8.2,' s'/)
1825	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1826	' Output every ',F8.2,' s ',A/ &
1827	' Time averaged over ',F8.2,' s'/ &
1828	' Averaging input every ',F8.2,' s'/ &
1829	' Cross sections at ',A1,' = ',A/ &
1830	' scalar-coordinates: ',A,' m'/)
1831	343 FORMAT (/' Arrays: ',A/ &
1832	' Output every ',F8.2,' s ',A/ &
1833	' Time averaged over ',F8.2,' s'/ &
1834	' Averaging input every ',F8.2,' s'/ &
1835	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1836	344 FORMAT (' Output format: ',A/)
1837	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1838	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1839	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1840	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1841	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1842	347 FORMAT (' Variables: ',A/ &
1843	' Output every ',F8.2,' s')
1844	348 FORMAT (' Variables: ',A/ &
1845	' Output every ',F8.2,' s'/ &
1846	' Time averaged over ',F8.2,' s'/ &
1847	' Averaging input every ',F8.2,' s')
1848	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1849	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1850	13(' ',8(F8.2,',')/) )
1851	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1852	'all gridpoints along ',A,'-direction (default).' )
1853	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1854	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1855	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1856	#if defined( __dvrp_graphics )
1857	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1858	' Output every ',F7.1,' s'/ &
1859	' Output mode: ',A/ &
1860	' Host / User: ',A,' / ',A/ &
1861	' Directory: ',A// &
1862	' The sequence contains:')
1863	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1864	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1865	362 FORMAT (/' Slicer plane ',A/ &
1866	' Slicer limits: [',F6.2,',',F6.2,']')
1867	363 FORMAT (/' Particles'/ &
1868	' particle size: ',F7.2,' m')
1869	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1870	F6.2,',',F6.2,']')
1871	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1872	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1873	')'/ &
1874	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1875	' from y = ',F9.1,' m to y = ',F9.1,' m')
1876	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1877	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1878	#endif
1879	#if defined( __spectra )
1880	370 FORMAT (' Spectra:')
1881	371 FORMAT (' Output every ',F7.1,' s'/)
1882	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1883	' Directions: ', 10(A5,',')/ &
1884	' height levels k = ', 20(I3,',')/ &
1885	' ', 20(I3,',')/ &
1886	' ', 20(I3,',')/ &
1887	' ', 20(I3,',')/ &
1888	' ', 19(I3,','),I3,'.'/ &
1889	' height levels selected for standard plot:'/ &
1890	' k = ', 20(I3,',')/ &
1891	' ', 20(I3,',')/ &
1892	' ', 20(I3,',')/ &
1893	' ', 20(I3,',')/ &
1894	' ', 19(I3,','),I3,'.'/ &
1895	' Time averaged over ', F7.1, ' s,' / &
1896	' Profiles for the time averaging are taken every ', &
1897	F6.1,' s')
1898	#endif
1899	400 FORMAT (//' Physical quantities:'/ &
1900	' -------------------'/)
1901	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1902	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1903	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1904	' f* = ',F9.6,' 1/s')
1905	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1906	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
1907	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1908	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
1909	415 FORMAT (/' Cloud physics parameters:'/ &
1910	' ------------------------'/)
1911	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1912	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1913	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1914	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1915	' Vapourization heat : L_v = ',E8.2,' J/kg')
1916	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1917	' Height: ',A,' m'/ &
1918	' Temperature: ',A,' K'/ &
1919	' Gradient: ',A,' K/100m'/ &
1920	' Gridpoint: ',A)
1921	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1922	' Height: ',A,' m'/ &
1923	' Humidity: ',A,' kg/kg'/ &
1924	' Gradient: ',A,' (kg/kg)/100m'/ &
1925	' Gridpoint: ',A)
1926	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1927	' Height: ',A,' m'/ &
1928	' Scalar concentration: ',A,' kg/m**3'/ &
1929	' Gradient: ',A,' (kg/m**3)/100m'/ &
1930	' Gridpoint: ',A)
1931	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1932	' Height: ',A,' m'/ &
1933	' ug: ',A,' m/s'/ &
1934	' Gradient: ',A,' 1/100s'/ &
1935	' Gridpoint: ',A)
1936	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1937	' Height: ',A,' m'/ &
1938	' vg: ',A,' m/s'/ &
1939	' Gradient: ',A,' 1/100s'/ &
1940	' Gridpoint: ',A)
1941	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1942	' Height: ',A,' m'/ &
1943	' Salinity: ',A,' psu'/ &
1944	' Gradient: ',A,' psu/100m'/ &
1945	' Gridpoint: ',A)
1946	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1947	' Height: ',A,' m'/ &
1948	' w_subs: ',A,' m/s'/ &
1949	' Gradient: ',A,' (m/s)/100m'/ &
1950	' Gridpoint: ',A)
1951	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1952	' profiles')
1953	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1954	' ----------------------------------'/)
1955	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1956	'on)')
1957	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1958	' total water content is used.'/ &
1959	' Condensation is parameterized via 0% - or 100% scheme.')
1960	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1961	'icle model')
1962	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1963	' droplets < 1.0E-6 m')
1964	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1965	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1966	'are used'/ &
1967	' number of radius classes: ',I3,' interval ', &
1968	'[1.0E-6,2.0E-4] m'/ &
1969	' number of dissipation classes: ',I2,' interval ', &
1970	'[0,1000] cm2/s3')
1971	437 FORMAT (' Droplet collision is switched off')
1972	450 FORMAT (//' LES / Turbulence quantities:'/ &
1973	' ---------------------------'/)
1974	451 FORMAT (' Diffusion coefficients are constant:'/ &
1975	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1976	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1977	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1978	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1979	470 FORMAT (//' Actions during the simulation:'/ &
1980	' -----------------------------'/)
1981	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1982	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1983	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1984	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1985	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1986	' to i/j =',I4)
1987	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1988	1X,F5.3, ' m2/s2')
1989	474 FORMAT (' Random number generator used : ',A/)
1990	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1991	'respectively, if'/ &
1992	' the value is negative) by ',F5.2,' K at the beginning of the',&
1993	' 3D-simulation'/)
1994	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1995	'respectively, if the'/ &
1996	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1997	' the 3D-simulation'/)
1998	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1999	'respectively, if the'/ &
2000	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2001	' the 3D-simulation'/)
2002	480 FORMAT (' Particles:'/ &
2003	' ---------'// &
2004	' Particle advection is active (switched on at t = ', F7.1, &
2005	' s)'/ &
2006	' Start of new particle generations every ',F6.1,' s'/ &
2007	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2008	' bottom: ', A, ' top: ', A/&
2009	' Maximum particle age: ',F9.1,' s'/ &
2010	' Advection stopped at t = ',F9.1,' s'/ &
2011	' Particles are sorted every ',F9.1,' s'/)
2012	481 FORMAT (' Particles have random start positions'/)
2013	482 FORMAT (' Particles are advected only horizontally'/)
2014	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2015	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2016	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2017	' Maximum age of the end of the tail: ',F8.2,' s')
2018	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2019	486 FORMAT (' Particle statistics are written on file'/)
2020	487 FORMAT (' Number of particle groups: ',I2/)
2021	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2022	' minimum timestep for advection: ', F7.5/)
2023	489 FORMAT (' Number of particles simultaneously released at each ', &
2024	'point: ', I5/)
2025	490 FORMAT (' Particle group ',I2,':'/ &
2026	' Particle radius: ',E10.3, 'm')
2027	491 FORMAT (' Particle inertia is activated'/ &
2028	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2029	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2030	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2031	' y:',F8.1,' - ',F8.1,' m'/&
2032	' z:',F8.1,' - ',F8.1,' m'/&
2033	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2034	' m dz = ',F8.1,' m'/)
2035	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2036	F8.2,' s'/)
2037	495 FORMAT (' Number of particles in total domain: ',I10/)
2038	500 FORMAT (//' 1D-Model parameters:'/ &
2039	' -------------------'// &
2040	' Simulation time: ',F8.1,' s'/ &
2041	' Run-controll output every: ',F8.1,' s'/ &
2042	' Vertical profile output every: ',F8.1,' s'/ &
2043	' Mixing length calculation: ',A/ &
2044	' Dissipation calculation: ',A/)
2045	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2046	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2047	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2048	505 FORMAT (' Precipitation parameterization via Seifert-Beheng-Scheme')
2049	506 FORMAT (' Drizzle parameterization via Stokes law')
2050	507 FORMAT (' Turbulence effects on precipitation process')
2051	508 FORMAT (' Ventilation effects on evaporation of rain drops')
2052	509 FORMAT (' Slope limiter used for sedimentation process')
2053	510 FORMAT (' Droplet density : N_c = ',F6.1,' 1/cm**3')
2054	511 FORMAT (' Sedimentation Courant number: '/&
2055	' C_s = ',F3.1,' ')
2056
2057	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |