Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1033

Last change on this file since 1033 was 1031, checked in by raasch, 12 years ago
netCDF4 without parallel file support implemented additional define string netcdf4_parallel is required to switch on parallel file support
Property svn:keywords set to `Id`
File size: 75.5 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! output of netCDF data format modified
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 1031 2012-10-19 14:35:30Z letzel $
11	!
12	! 1015 2012-09-27 09:23:24Z raasch
13	! output of Aajustment of mixing length to the Prandtl mixing length at first
14	! grid point above ground removed
15	!
16	! 1003 2012-09-14 14:35:53Z raasch
17	! output of information about equal/unequal subdomain size removed
18	!
19	! 1001 2012-09-13 14:08:46Z raasch
20	! all actions concerning leapfrog- and upstream-spline-scheme removed
21	!
22	! 978 2012-08-09 08:28:32Z fricke
23	! -km_damp_max, outflow_damping_width
24	! +pt_damping_factor, pt_damping_width
25	! +z0h
26	!
27	! 964 2012-07-26 09:14:24Z raasch
28	! output of profil-related quantities removed
29	!
30	! 940 2012-07-09 14:31:00Z raasch
31	! Output in case of simulations for pure neutral stratification (no pt-equation
32	! solved)
33	!
34	! 927 2012-06-06 19:15:04Z raasch
35	! output of masking_method for mg-solver
36	!
37	! 868 2012-03-28 12:21:07Z raasch
38	! translation velocity in Galilean transformation changed to 0.6 * ug
39	!
40	! 833 2012-02-22 08:55:55Z maronga
41	! Adjusted format for leaf area density
42	!
43	! 828 2012-02-21 12:00:36Z raasch
44	! output of dissipation_classes + radius_classes
45	!
46	! 825 2012-02-19 03:03:44Z raasch
47	! Output of cloud physics parameters/quantities complemented and restructured
48	!
49	! 767 2011-10-14 06:39:12Z raasch
50	! Output of given initial u,v-profiles
51	!
52	! 759 2011-09-15 13:58:31Z raasch
53	! output of maximum number of parallel io streams
54	!
55	! 707 2011-03-29 11:39:40Z raasch
56	! bc_lr/ns replaced by bc_lr/ns_cyc
57	!
58	! 667 2010-12-23 12:06:00Z suehring/gryschka
59	! Output of advection scheme.
60	! Modified output of Prandtl-layer height.
61	!
62	! 580 2010-10-05 13:59:11Z heinze
63	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
64	! ws_vertical_gradient_level to subs_vertical_gradient_level and
65	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
66	!
67	! 493 2010-03-01 08:30:24Z raasch
68	! NetCDF data output format extendend for NetCDF4/HDF5
69	!
70	! 449 2010-02-02 11:23:59Z raasch
71	! +large scale vertical motion (subsidence/ascent)
72	! Bugfix: index problem concerning gradient_level indices removed
73	!
74	! 410 2009-12-04 17:05:40Z letzel
75	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
76	! mask_scale\|_x\|y\|z, masks, skip_time_domask
77	!
78	! 346 2009-07-06 10:13:41Z raasch
79	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
80	! Coupling with independent precursor runs.
81	! Output of messages replaced by message handling routine.
82	! Output of several additional dvr parameters
83	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
84	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
85	! dp_smooth, dpdxy, u_bulk, v_bulk
86	! topography_grid_convention moved from user_header
87	! small bugfix concerning 3d 64bit netcdf output format
88	!
89	! 206 2008-10-13 14:59:11Z raasch
90	! Bugfix: error in zu index in case of section_xy = -1
91	!
92	! 198 2008-09-17 08:55:28Z raasch
93	! Format adjustments allowing output of larger revision numbers
94	!
95	! 197 2008-09-16 15:29:03Z raasch
96	! allow 100 spectra levels instead of 10 for consistency with
97	! define_netcdf_header,
98	! bugfix in the output of the characteristic levels of potential temperature,
99	! geostrophic wind, scalar concentration, humidity and leaf area density,
100	! output of turbulence recycling informations
101	!
102	! 138 2007-11-28 10:03:58Z letzel
103	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
104	! Allow two instead of one digit to specify isosurface and slicer variables.
105	! Output of sorting frequency of particles
106	!
107	! 108 2007-08-24 15:10:38Z letzel
108	! Output of informations for coupled model runs (boundary conditions etc.)
109	! + output of momentumfluxes at the top boundary
110	! Rayleigh damping for ocean, e_init
111	!
112	! 97 2007-06-21 08:23:15Z raasch
113	! Adjustments for the ocean version.
114	! use_pt_reference renamed use_reference
115	!
116	! 87 2007-05-22 15:46:47Z raasch
117	! Bugfix: output of use_upstream_for_tke
118	!
119	! 82 2007-04-16 15:40:52Z raasch
120	! Preprocessor strings for different linux clusters changed to "lc",
121	! routine local_flush is used for buffer flushing
122	!
123	! 76 2007-03-29 00:58:32Z raasch
124	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
125	! output of the loop optimization method, moisture renamed humidity,
126	! output of subversion revision number
127	!
128	! 19 2007-02-23 04:53:48Z raasch
129	! Output of scalar flux applied at top boundary
130	!
131	! RCS Log replace by Id keyword, revision history cleaned up
132	!
133	! Revision 1.63 2006/08/22 13:53:13 raasch
134	! Output of dz_max
135	!
136	! Revision 1.1 1997/08/11 06:17:20 raasch
137	! Initial revision
138	!
139	!
140	! Description:
141	! ------------
142	! Writing a header with all important informations about the actual run.
143	! This subroutine is called three times, two times at the beginning
144	! (writing information on files RUN_CONTROL and HEADER) and one time at the
145	! end of the run, then writing additional information about CPU-usage on file
146	! header.
147	!-----------------------------------------------------------------------------!
148
149	USE arrays_3d
150	USE control_parameters
151	USE cloud_parameters
152	USE cpulog
153	USE dvrp_variables
154	USE grid_variables
155	USE indices
156	USE model_1d
157	USE particle_attributes
158	USE pegrid
159	USE subsidence_mod
160	USE spectrum
161
162	IMPLICIT NONE
163
164	CHARACTER (LEN=1) :: prec
165	CHARACTER (LEN=2) :: do2d_mode
166	CHARACTER (LEN=5) :: section_chr
167	CHARACTER (LEN=9) :: time_to_string
168	CHARACTER (LEN=10) :: coor_chr, host_chr
169	CHARACTER (LEN=16) :: begin_chr
170	CHARACTER (LEN=23) :: ver_rev
171	CHARACTER (LEN=40) :: output_format
172	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
173	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
174	domask_chr, run_classification
175	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
176	temperatures, ugcomponent, vgcomponent
177	CHARACTER (LEN=85) :: roben, runten
178
179	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
180
181	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
182	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
183	REAL :: cpuseconds_per_simulated_second
184
185	!
186	!-- Open the output file. At the end of the simulation, output is directed
187	!-- to unit 19.
188	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
189	.NOT. simulated_time_at_begin /= simulated_time ) THEN
190	io = 15 ! header output on file RUN_CONTROL
191	ELSE
192	io = 19 ! header output on file HEADER
193	ENDIF
194	CALL check_open( io )
195
196	!
197	!-- At the end of the run, output file (HEADER) will be rewritten with
198	!-- new informations
199	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
200
201	!
202	!-- Determine kind of model run
203	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
204	run_classification = '3D - restart run'
205	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
206	run_classification = '3D - run with cyclic fill of 3D - prerun data'
207	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
208	run_classification = '3D - run without 1D - prerun'
209	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
210	run_classification = '3D - run with 1D - prerun'
211	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
212	run_classification = '3D - run initialized by user'
213	ELSE
214	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
215	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
216	ENDIF
217	IF ( ocean ) THEN
218	run_classification = 'ocean - ' // run_classification
219	ELSE
220	run_classification = 'atmosphere - ' // run_classification
221	ENDIF
222
223	!
224	!-- Run-identification, date, time, host
225	host_chr = host(1:10)
226	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
227	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
228	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
229	#if defined( __mpi2 )
230	mpi_type = 2
231	#else
232	mpi_type = 1
233	#endif
234	WRITE ( io, 101 ) mpi_type, coupling_mode
235	ENDIF
236	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
237	ADJUSTR( host_chr )
238	#if defined( __parallel )
239	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
240	char1 = 'calculated'
241	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
242	host(1:2) == 'lc' ) .AND. &
243	npex == -1 .AND. pdims(2) == 1 ) THEN
244	char1 = 'forced'
245	ELSE
246	char1 = 'predefined'
247	ENDIF
248	IF ( threads_per_task == 1 ) THEN
249	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
250	ELSE
251	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
252	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
253	ENDIF
254	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
255	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
256	npex == -1 .AND. pdims(2) == 1 ) &
257	THEN
258	WRITE ( io, 106 )
259	ELSEIF ( pdims(2) == 1 ) THEN
260	WRITE ( io, 107 ) 'x'
261	ELSEIF ( pdims(1) == 1 ) THEN
262	WRITE ( io, 107 ) 'y'
263	ENDIF
264	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
265	IF ( numprocs /= maximum_parallel_io_streams ) THEN
266	WRITE ( io, 108 ) maximum_parallel_io_streams
267	ENDIF
268	#endif
269	WRITE ( io, 99 )
270
271	!
272	!-- Numerical schemes
273	WRITE ( io, 110 )
274	IF ( psolver(1:7) == 'poisfft' ) THEN
275	WRITE ( io, 111 ) TRIM( fft_method )
276	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
277	ELSEIF ( psolver == 'sor' ) THEN
278	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
279	ELSEIF ( psolver == 'multigrid' ) THEN
280	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
281	IF ( mg_cycles == -1 ) THEN
282	WRITE ( io, 140 ) residual_limit
283	ELSE
284	WRITE ( io, 141 ) mg_cycles
285	ENDIF
286	IF ( mg_switch_to_pe0_level == 0 ) THEN
287	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
288	nzt_mg(1)
289	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
290	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
291	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
292	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
293	nzt_mg(mg_switch_to_pe0_level), &
294	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
295	nzt_mg(1)
296	ENDIF
297	IF ( masking_method ) WRITE ( io, 144 )
298	ENDIF
299	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
300	THEN
301	WRITE ( io, 142 )
302	ENDIF
303
304	IF ( momentum_advec == 'pw-scheme' ) THEN
305	WRITE ( io, 113 )
306	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
307	WRITE ( io, 503 )
308	ENDIF
309	IF ( scalar_advec == 'pw-scheme' ) THEN
310	WRITE ( io, 116 )
311	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
312	WRITE ( io, 504 )
313	ELSE
314	WRITE ( io, 118 )
315	ENDIF
316
317	WRITE ( io, 139 ) TRIM( loop_optimization )
318
319	IF ( galilei_transformation ) THEN
320	IF ( use_ug_for_galilei_tr ) THEN
321	char1 = '0.6 * geostrophic wind'
322	ELSE
323	char1 = 'mean wind in model domain'
324	ENDIF
325	IF ( simulated_time_at_begin == simulated_time ) THEN
326	char2 = 'at the start of the run'
327	ELSE
328	char2 = 'at the end of the run'
329	ENDIF
330	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
331	advected_distance_x/1000.0, advected_distance_y/1000.0
332	ENDIF
333	WRITE ( io, 122 ) timestep_scheme
334	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
335	IF ( rayleigh_damping_factor /= 0.0 ) THEN
336	IF ( .NOT. ocean ) THEN
337	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
338	rayleigh_damping_factor
339	ELSE
340	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
341	rayleigh_damping_factor
342	ENDIF
343	ENDIF
344	IF ( neutral ) WRITE ( io, 131 ) pt_surface
345	IF ( humidity ) THEN
346	IF ( .NOT. cloud_physics ) THEN
347	WRITE ( io, 129 )
348	ELSE
349	WRITE ( io, 130 )
350	ENDIF
351	ENDIF
352	IF ( passive_scalar ) WRITE ( io, 134 )
353	IF ( conserve_volume_flow ) THEN
354	WRITE ( io, 150 ) conserve_volume_flow_mode
355	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
356	WRITE ( io, 151 ) u_bulk, v_bulk
357	ENDIF
358	ELSEIF ( dp_external ) THEN
359	IF ( dp_smooth ) THEN
360	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
361	ELSE
362	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
363	ENDIF
364	ENDIF
365	IF ( large_scale_subsidence ) THEN
366	WRITE ( io, 153 )
367	WRITE ( io, 154 )
368	ENDIF
369	WRITE ( io, 99 )
370
371	!
372	!-- Runtime and timestep informations
373	WRITE ( io, 200 )
374	IF ( .NOT. dt_fixed ) THEN
375	WRITE ( io, 201 ) dt_max, cfl_factor
376	ELSE
377	WRITE ( io, 202 ) dt
378	ENDIF
379	WRITE ( io, 203 ) simulated_time_at_begin, end_time
380
381	IF ( time_restart /= 9999999.9 .AND. &
382	simulated_time_at_begin == simulated_time ) THEN
383	IF ( dt_restart == 9999999.9 ) THEN
384	WRITE ( io, 204 ) ' Restart at: ',time_restart
385	ELSE
386	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
387	ENDIF
388	ENDIF
389
390	IF ( simulated_time_at_begin /= simulated_time ) THEN
391	i = MAX ( log_point_s(10)%counts, 1 )
392	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
393	cpuseconds_per_simulated_second = 0.0
394	ELSE
395	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
396	( simulated_time - &
397	simulated_time_at_begin )
398	ENDIF
399	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
400	log_point_s(10)%sum / REAL( i ), &
401	cpuseconds_per_simulated_second
402	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
403	IF ( dt_restart == 9999999.9 ) THEN
404	WRITE ( io, 204 ) ' Next restart at: ',time_restart
405	ELSE
406	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
407	ENDIF
408	ENDIF
409	ENDIF
410
411	!
412	!-- Start time for coupled runs, if independent precursor runs for atmosphere
413	!-- and ocean are used. In this case, coupling_start_time defines the time
414	!-- when the coupling is switched on.
415	IF ( coupling_start_time /= 0.0 ) THEN
416	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
417	char1 = 'Precursor run for a coupled atmosphere-ocean run'
418	ELSE
419	char1 = 'Coupled atmosphere-ocean run following independent ' // &
420	'precursor runs'
421	ENDIF
422	WRITE ( io, 207 ) char1, coupling_start_time
423	ENDIF
424
425	!
426	!-- Computational grid
427	IF ( .NOT. ocean ) THEN
428	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
429	IF ( dz_stretch_level_index < nzt+1 ) THEN
430	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
431	dz_stretch_factor, dz_max
432	ENDIF
433	ELSE
434	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
435	IF ( dz_stretch_level_index > 0 ) THEN
436	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
437	dz_stretch_factor, dz_max
438	ENDIF
439	ENDIF
440	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
441	MIN( nnz+2, nzt+2 )
442	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
443
444	!
445	!-- Topography
446	WRITE ( io, 270 ) topography
447	SELECT CASE ( TRIM( topography ) )
448
449	CASE ( 'flat' )
450	! no actions necessary
451
452	CASE ( 'single_building' )
453	blx = INT( building_length_x / dx )
454	bly = INT( building_length_y / dy )
455	bh = INT( building_height / dz )
456
457	IF ( building_wall_left == 9999999.9 ) THEN
458	building_wall_left = ( nx + 1 - blx ) / 2 * dx
459	ENDIF
460	bxl = INT ( building_wall_left / dx + 0.5 )
461	bxr = bxl + blx
462
463	IF ( building_wall_south == 9999999.9 ) THEN
464	building_wall_south = ( ny + 1 - bly ) / 2 * dy
465	ENDIF
466	bys = INT ( building_wall_south / dy + 0.5 )
467	byn = bys + bly
468
469	WRITE ( io, 271 ) building_length_x, building_length_y, &
470	building_height, bxl, bxr, bys, byn
471
472	CASE ( 'single_street_canyon' )
473	ch = NINT( canyon_height / dz )
474	IF ( canyon_width_x /= 9999999.9 ) THEN
475	!
476	!-- Street canyon in y direction
477	cwx = NINT( canyon_width_x / dx )
478	IF ( canyon_wall_left == 9999999.9 ) THEN
479	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
480	ENDIF
481	cxl = NINT( canyon_wall_left / dx )
482	cxr = cxl + cwx
483	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
484
485	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
486	!
487	!-- Street canyon in x direction
488	cwy = NINT( canyon_width_y / dy )
489	IF ( canyon_wall_south == 9999999.9 ) THEN
490	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
491	ENDIF
492	cys = NINT( canyon_wall_south / dy )
493	cyn = cys + cwy
494	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
495	ENDIF
496
497	END SELECT
498
499	IF ( TRIM( topography ) /= 'flat' ) THEN
500	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
501	IF ( TRIM( topography ) == 'single_building' .OR. &
502	TRIM( topography ) == 'single_street_canyon' ) THEN
503	WRITE ( io, 278 )
504	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
505	WRITE ( io, 279 )
506	ENDIF
507	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
508	WRITE ( io, 278 )
509	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
510	WRITE ( io, 279 )
511	ENDIF
512	ENDIF
513
514	IF ( plant_canopy ) THEN
515
516	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
517	IF ( passive_scalar ) THEN
518	WRITE ( io, 281 ) scalar_exchange_coefficient, &
519	leaf_surface_concentration
520	ENDIF
521
522	!
523	!-- Heat flux at the top of vegetation
524	WRITE ( io, 282 ) cthf
525
526	!
527	!-- Leaf area density profile
528	!-- Building output strings, starting with surface value
529	WRITE ( learde, '(F6.4)' ) lad_surface
530	gradients = '------'
531	slices = ' 0'
532	coordinates = ' 0.0'
533	i = 1
534	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
535
536	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
537	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
538
539	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
540	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
541
542	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
543	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
544
545	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
546	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
547
548	i = i + 1
549	ENDDO
550
551	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
552	TRIM( gradients ), TRIM( slices )
553
554	ENDIF
555
556	!
557	!-- Boundary conditions
558	IF ( ibc_p_b == 0 ) THEN
559	runten = 'p(0) = 0 \|'
560	ELSEIF ( ibc_p_b == 1 ) THEN
561	runten = 'p(0) = p(1) \|'
562	ELSE
563	runten = 'p(0) = p(1) +R\|'
564	ENDIF
565	IF ( ibc_p_t == 0 ) THEN
566	roben = 'p(nzt+1) = 0 \|'
567	ELSE
568	roben = 'p(nzt+1) = p(nzt) \|'
569	ENDIF
570
571	IF ( ibc_uv_b == 0 ) THEN
572	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
573	ELSE
574	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
575	ENDIF
576	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
577	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
578	ELSEIF ( ibc_uv_t == 0 ) THEN
579	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
580	ELSE
581	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
582	ENDIF
583
584	IF ( ibc_pt_b == 0 ) THEN
585	runten = TRIM( runten ) // ' pt(0) = pt_surface'
586	ELSEIF ( ibc_pt_b == 1 ) THEN
587	runten = TRIM( runten ) // ' pt(0) = pt(1)'
588	ELSEIF ( ibc_pt_b == 2 ) THEN
589	runten = TRIM( runten ) // ' pt(0) = from coupled model'
590	ENDIF
591	IF ( ibc_pt_t == 0 ) THEN
592	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
593	ELSEIF( ibc_pt_t == 1 ) THEN
594	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
595	ELSEIF( ibc_pt_t == 2 ) THEN
596	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
597
598	ENDIF
599
600	WRITE ( io, 300 ) runten, roben
601
602	IF ( .NOT. constant_diffusion ) THEN
603	IF ( ibc_e_b == 1 ) THEN
604	runten = 'e(0) = e(1)'
605	ELSE
606	runten = 'e(0) = e(1) = (u/0.1)*2'
607	ENDIF
608	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
609
610	WRITE ( io, 301 ) 'e', runten, roben
611
612	ENDIF
613
614	IF ( ocean ) THEN
615	runten = 'sa(0) = sa(1)'
616	IF ( ibc_sa_t == 0 ) THEN
617	roben = 'sa(nzt+1) = sa_surface'
618	ELSE
619	roben = 'sa(nzt+1) = sa(nzt)'
620	ENDIF
621	WRITE ( io, 301 ) 'sa', runten, roben
622	ENDIF
623
624	IF ( humidity ) THEN
625	IF ( ibc_q_b == 0 ) THEN
626	runten = 'q(0) = q_surface'
627	ELSE
628	runten = 'q(0) = q(1)'
629	ENDIF
630	IF ( ibc_q_t == 0 ) THEN
631	roben = 'q(nzt) = q_top'
632	ELSE
633	roben = 'q(nzt) = q(nzt-1) + dq/dz'
634	ENDIF
635	WRITE ( io, 301 ) 'q', runten, roben
636	ENDIF
637
638	IF ( passive_scalar ) THEN
639	IF ( ibc_q_b == 0 ) THEN
640	runten = 's(0) = s_surface'
641	ELSE
642	runten = 's(0) = s(1)'
643	ENDIF
644	IF ( ibc_q_t == 0 ) THEN
645	roben = 's(nzt) = s_top'
646	ELSE
647	roben = 's(nzt) = s(nzt-1) + ds/dz'
648	ENDIF
649	WRITE ( io, 301 ) 's', runten, roben
650	ENDIF
651
652	IF ( use_surface_fluxes ) THEN
653	WRITE ( io, 303 )
654	IF ( constant_heatflux ) THEN
655	WRITE ( io, 306 ) surface_heatflux
656	IF ( random_heatflux ) WRITE ( io, 307 )
657	ENDIF
658	IF ( humidity .AND. constant_waterflux ) THEN
659	WRITE ( io, 311 ) surface_waterflux
660	ENDIF
661	IF ( passive_scalar .AND. constant_waterflux ) THEN
662	WRITE ( io, 313 ) surface_waterflux
663	ENDIF
664	ENDIF
665
666	IF ( use_top_fluxes ) THEN
667	WRITE ( io, 304 )
668	IF ( coupling_mode == 'uncoupled' ) THEN
669	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
670	IF ( constant_top_heatflux ) THEN
671	WRITE ( io, 306 ) top_heatflux
672	ENDIF
673	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
674	WRITE ( io, 316 )
675	ENDIF
676	IF ( ocean .AND. constant_top_salinityflux ) THEN
677	WRITE ( io, 309 ) top_salinityflux
678	ENDIF
679	IF ( humidity .OR. passive_scalar ) THEN
680	WRITE ( io, 315 )
681	ENDIF
682	ENDIF
683
684	IF ( prandtl_layer ) THEN
685	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
686	z0h_factor*roughness_length, kappa, &
687	rif_min, rif_max
688	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
689	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
690	WRITE ( io, 312 )
691	ENDIF
692	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
693	WRITE ( io, 314 )
694	ENDIF
695	ELSE
696	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
697	WRITE ( io, 310 ) rif_min, rif_max
698	ENDIF
699	ENDIF
700
701	WRITE ( io, 317 ) bc_lr, bc_ns
702	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
703	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
704	IF ( turbulent_inflow ) THEN
705	WRITE ( io, 319 ) recycling_width, recycling_plane, &
706	inflow_damping_height, inflow_damping_width
707	ENDIF
708	ENDIF
709
710	!
711	!-- Listing of 1D-profiles
712	WRITE ( io, 325 ) dt_dopr_listing
713	IF ( averaging_interval_pr /= 0.0 ) THEN
714	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
715	ENDIF
716
717	!
718	!-- DATA output
719	WRITE ( io, 330 )
720	IF ( averaging_interval_pr /= 0.0 ) THEN
721	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
722	ENDIF
723
724	!
725	!-- 1D-profiles
726	dopr_chr = 'Profile:'
727	IF ( dopr_n /= 0 ) THEN
728	WRITE ( io, 331 )
729
730	output_format = ''
731	IF ( netcdf_output ) THEN
732	output_format = output_format_netcdf
733	ENDIF
734	WRITE ( io, 344 ) output_format
735
736	DO i = 1, dopr_n
737	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
738	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
739	WRITE ( io, 332 ) dopr_chr
740	dopr_chr = ' :'
741	ENDIF
742	ENDDO
743
744	IF ( dopr_chr /= '' ) THEN
745	WRITE ( io, 332 ) dopr_chr
746	ENDIF
747	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
748	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
749	ENDIF
750
751	!
752	!-- 2D-arrays
753	DO av = 0, 1
754
755	i = 1
756	do2d_xy = ''
757	do2d_xz = ''
758	do2d_yz = ''
759	DO WHILE ( do2d(av,i) /= ' ' )
760
761	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
762	do2d_mode = do2d(av,i)(l-1:l)
763
764	SELECT CASE ( do2d_mode )
765	CASE ( 'xy' )
766	ll = LEN_TRIM( do2d_xy )
767	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
768	CASE ( 'xz' )
769	ll = LEN_TRIM( do2d_xz )
770	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
771	CASE ( 'yz' )
772	ll = LEN_TRIM( do2d_yz )
773	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
774	END SELECT
775
776	i = i + 1
777
778	ENDDO
779
780	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
781	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
782	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
783	( netcdf_output .OR. iso2d_output ) ) THEN
784
785	IF ( av == 0 ) THEN
786	WRITE ( io, 334 ) ''
787	ELSE
788	WRITE ( io, 334 ) '(time-averaged)'
789	ENDIF
790
791	IF ( do2d_at_begin ) THEN
792	begin_chr = 'and at the start'
793	ELSE
794	begin_chr = ''
795	ENDIF
796
797	output_format = ''
798	IF ( netcdf_output ) THEN
799	output_format = output_format_netcdf
800	ENDIF
801	IF ( iso2d_output ) THEN
802	IF ( netcdf_output ) THEN
803	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
804	ELSE
805	output_format = 'iso2d'
806	ENDIF
807	ENDIF
808	WRITE ( io, 344 ) output_format
809
810	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
811	i = 1
812	slices = '/'
813	coordinates = '/'
814	!
815	!-- Building strings with index and coordinate informations of the
816	!-- slices
817	DO WHILE ( section(i,1) /= -9999 )
818
819	WRITE (section_chr,'(I5)') section(i,1)
820	section_chr = ADJUSTL( section_chr )
821	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
822
823	IF ( section(i,1) == -1 ) THEN
824	WRITE (coor_chr,'(F10.1)') -1.0
825	ELSE
826	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
827	ENDIF
828	coor_chr = ADJUSTL( coor_chr )
829	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
830
831	i = i + 1
832	ENDDO
833	IF ( av == 0 ) THEN
834	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
835	TRIM( begin_chr ), 'k', TRIM( slices ), &
836	TRIM( coordinates )
837	IF ( skip_time_do2d_xy /= 0.0 ) THEN
838	WRITE ( io, 339 ) skip_time_do2d_xy
839	ENDIF
840	ELSE
841	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
842	TRIM( begin_chr ), averaging_interval, &
843	dt_averaging_input, 'k', TRIM( slices ), &
844	TRIM( coordinates )
845	IF ( skip_time_data_output_av /= 0.0 ) THEN
846	WRITE ( io, 339 ) skip_time_data_output_av
847	ENDIF
848	ENDIF
849
850	ENDIF
851
852	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
853	i = 1
854	slices = '/'
855	coordinates = '/'
856	!
857	!-- Building strings with index and coordinate informations of the
858	!-- slices
859	DO WHILE ( section(i,2) /= -9999 )
860
861	WRITE (section_chr,'(I5)') section(i,2)
862	section_chr = ADJUSTL( section_chr )
863	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
864
865	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
866	coor_chr = ADJUSTL( coor_chr )
867	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
868
869	i = i + 1
870	ENDDO
871	IF ( av == 0 ) THEN
872	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
873	TRIM( begin_chr ), 'j', TRIM( slices ), &
874	TRIM( coordinates )
875	IF ( skip_time_do2d_xz /= 0.0 ) THEN
876	WRITE ( io, 339 ) skip_time_do2d_xz
877	ENDIF
878	ELSE
879	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
880	TRIM( begin_chr ), averaging_interval, &
881	dt_averaging_input, 'j', TRIM( slices ), &
882	TRIM( coordinates )
883	IF ( skip_time_data_output_av /= 0.0 ) THEN
884	WRITE ( io, 339 ) skip_time_data_output_av
885	ENDIF
886	ENDIF
887	ENDIF
888
889	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
890	i = 1
891	slices = '/'
892	coordinates = '/'
893	!
894	!-- Building strings with index and coordinate informations of the
895	!-- slices
896	DO WHILE ( section(i,3) /= -9999 )
897
898	WRITE (section_chr,'(I5)') section(i,3)
899	section_chr = ADJUSTL( section_chr )
900	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
901
902	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
903	coor_chr = ADJUSTL( coor_chr )
904	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
905
906	i = i + 1
907	ENDDO
908	IF ( av == 0 ) THEN
909	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
910	TRIM( begin_chr ), 'i', TRIM( slices ), &
911	TRIM( coordinates )
912	IF ( skip_time_do2d_yz /= 0.0 ) THEN
913	WRITE ( io, 339 ) skip_time_do2d_yz
914	ENDIF
915	ELSE
916	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
917	TRIM( begin_chr ), averaging_interval, &
918	dt_averaging_input, 'i', TRIM( slices ), &
919	TRIM( coordinates )
920	IF ( skip_time_data_output_av /= 0.0 ) THEN
921	WRITE ( io, 339 ) skip_time_data_output_av
922	ENDIF
923	ENDIF
924	ENDIF
925
926	ENDIF
927
928	ENDDO
929
930	!
931	!-- 3d-arrays
932	DO av = 0, 1
933
934	i = 1
935	do3d_chr = ''
936	DO WHILE ( do3d(av,i) /= ' ' )
937
938	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
939	i = i + 1
940
941	ENDDO
942
943	IF ( do3d_chr /= '' ) THEN
944	IF ( av == 0 ) THEN
945	WRITE ( io, 336 ) ''
946	ELSE
947	WRITE ( io, 336 ) '(time-averaged)'
948	ENDIF
949
950	output_format = ''
951	IF ( netcdf_output ) THEN
952	output_format = output_format_netcdf
953	ENDIF
954	IF ( avs_output ) THEN
955	IF ( netcdf_output ) THEN
956	output_format = TRIM( output_format_netcdf ) // ' and avs'
957	ELSE
958	output_format = 'avs'
959	ENDIF
960	ENDIF
961	WRITE ( io, 344 ) output_format
962
963	IF ( do3d_at_begin ) THEN
964	begin_chr = 'and at the start'
965	ELSE
966	begin_chr = ''
967	ENDIF
968	IF ( av == 0 ) THEN
969	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
970	zu(nz_do3d), nz_do3d
971	ELSE
972	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
973	TRIM( begin_chr ), averaging_interval, &
974	dt_averaging_input, zu(nz_do3d), nz_do3d
975	ENDIF
976
977	IF ( do3d_compress ) THEN
978	do3d_chr = ''
979	i = 1
980	DO WHILE ( do3d(av,i) /= ' ' )
981
982	SELECT CASE ( do3d(av,i) )
983	CASE ( 'u' )
984	j = 1
985	CASE ( 'v' )
986	j = 2
987	CASE ( 'w' )
988	j = 3
989	CASE ( 'p' )
990	j = 4
991	CASE ( 'pt' )
992	j = 5
993	END SELECT
994	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
995	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
996	':' // prec // ','
997	i = i + 1
998
999	ENDDO
1000	WRITE ( io, 338 ) do3d_chr
1001
1002	ENDIF
1003
1004	IF ( av == 0 ) THEN
1005	IF ( skip_time_do3d /= 0.0 ) THEN
1006	WRITE ( io, 339 ) skip_time_do3d
1007	ENDIF
1008	ELSE
1009	IF ( skip_time_data_output_av /= 0.0 ) THEN
1010	WRITE ( io, 339 ) skip_time_data_output_av
1011	ENDIF
1012	ENDIF
1013
1014	ENDIF
1015
1016	ENDDO
1017
1018	!
1019	!-- masked arrays
1020	IF ( masks > 0 ) WRITE ( io, 345 ) &
1021	mask_scale_x, mask_scale_y, mask_scale_z
1022	DO mid = 1, masks
1023	DO av = 0, 1
1024
1025	i = 1
1026	domask_chr = ''
1027	DO WHILE ( domask(mid,av,i) /= ' ' )
1028	domask_chr = TRIM( domask_chr ) // ' ' // &
1029	TRIM( domask(mid,av,i) ) // ','
1030	i = i + 1
1031	ENDDO
1032
1033	IF ( domask_chr /= '' ) THEN
1034	IF ( av == 0 ) THEN
1035	WRITE ( io, 346 ) '', mid
1036	ELSE
1037	WRITE ( io, 346 ) ' (time-averaged)', mid
1038	ENDIF
1039
1040	output_format = ' '
1041	IF ( netcdf_output ) THEN
1042	output_format = output_format_netcdf
1043	ENDIF
1044	WRITE ( io, 344 ) output_format
1045
1046	IF ( av == 0 ) THEN
1047	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1048	ELSE
1049	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1050	averaging_interval, dt_averaging_input
1051	ENDIF
1052
1053	IF ( av == 0 ) THEN
1054	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1055	WRITE ( io, 339 ) skip_time_domask(mid)
1056	ENDIF
1057	ELSE
1058	IF ( skip_time_data_output_av /= 0.0 ) THEN
1059	WRITE ( io, 339 ) skip_time_data_output_av
1060	ENDIF
1061	ENDIF
1062	!
1063	!-- output locations
1064	DO dim = 1, 3
1065	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1066	count = 0
1067	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1068	count = count + 1
1069	ENDDO
1070	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1071	mask(mid,dim,:count)
1072	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1073	mask_loop(mid,dim,2) < 0.0 .AND. &
1074	mask_loop(mid,dim,3) == 0.0 ) THEN
1075	WRITE ( io, 350 ) dir(dim), dir(dim)
1076	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1077	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1078	mask_loop(mid,dim,1:2)
1079	ELSE
1080	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1081	mask_loop(mid,dim,1:3)
1082	ENDIF
1083	ENDDO
1084	ENDIF
1085
1086	ENDDO
1087	ENDDO
1088
1089	!
1090	!-- Timeseries
1091	IF ( dt_dots /= 9999999.9 ) THEN
1092	WRITE ( io, 340 )
1093
1094	output_format = ''
1095	IF ( netcdf_output ) THEN
1096	output_format = output_format_netcdf
1097	ENDIF
1098	WRITE ( io, 344 ) output_format
1099	WRITE ( io, 341 ) dt_dots
1100	ENDIF
1101
1102	#if defined( __dvrp_graphics )
1103	!
1104	!-- Dvrp-output
1105	IF ( dt_dvrp /= 9999999.9 ) THEN
1106	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1107	TRIM( dvrp_username ), TRIM( dvrp_directory )
1108	i = 1
1109	l = 0
1110	m = 0
1111	DO WHILE ( mode_dvrp(i) /= ' ' )
1112	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1113	READ ( mode_dvrp(i), '(10X,I2)' ) j
1114	l = l + 1
1115	IF ( do3d(0,j) /= ' ' ) THEN
1116	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1117	isosurface_color(:,l)
1118	ENDIF
1119	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1120	READ ( mode_dvrp(i), '(6X,I2)' ) j
1121	m = m + 1
1122	IF ( do2d(0,j) /= ' ' ) THEN
1123	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1124	slicer_range_limits_dvrp(:,m)
1125	ENDIF
1126	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1127	WRITE ( io, 363 ) dvrp_psize
1128	IF ( particle_dvrpsize /= 'none' ) THEN
1129	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1130	dvrpsize_interval
1131	ENDIF
1132	IF ( particle_color /= 'none' ) THEN
1133	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1134	color_interval
1135	ENDIF
1136	ENDIF
1137	i = i + 1
1138	ENDDO
1139
1140	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1141	superelevation_y, superelevation, clip_dvrp_l, &
1142	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1143
1144	IF ( TRIM( topography ) /= 'flat' ) THEN
1145	WRITE ( io, 366 ) topography_color
1146	IF ( cluster_size > 1 ) THEN
1147	WRITE ( io, 367 ) cluster_size
1148	ENDIF
1149	ENDIF
1150
1151	ENDIF
1152	#endif
1153
1154	#if defined( __spectra )
1155	!
1156	!-- Spectra output
1157	IF ( dt_dosp /= 9999999.9 ) THEN
1158	WRITE ( io, 370 )
1159
1160	output_format = ' '
1161	IF ( netcdf_output ) THEN
1162	output_format = output_format_netcdf
1163	ENDIF
1164	WRITE ( io, 344 ) output_format
1165	WRITE ( io, 371 ) dt_dosp
1166	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1167	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1168	( spectra_direction(i), i = 1,10 ), &
1169	( comp_spectra_level(i), i = 1,100 ), &
1170	( plot_spectra_level(i), i = 1,100 ), &
1171	averaging_interval_sp, dt_averaging_input_pr
1172	ENDIF
1173	#endif
1174
1175	WRITE ( io, 99 )
1176
1177	!
1178	!-- Physical quantities
1179	WRITE ( io, 400 )
1180
1181	!
1182	!-- Geostrophic parameters
1183	WRITE ( io, 410 ) omega, phi, f, fs
1184
1185	!
1186	!-- Other quantities
1187	WRITE ( io, 411 ) g
1188	IF ( use_reference ) THEN
1189	IF ( ocean ) THEN
1190	WRITE ( io, 412 ) prho_reference
1191	ELSE
1192	WRITE ( io, 413 ) pt_reference
1193	ENDIF
1194	ENDIF
1195
1196	!
1197	!-- Cloud physics parameters
1198	IF ( cloud_physics ) THEN
1199	WRITE ( io, 415 )
1200	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1201	ENDIF
1202
1203	!-- Profile of the geostrophic wind (component ug)
1204	!-- Building output strings
1205	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1206	gradients = '------'
1207	slices = ' 0'
1208	coordinates = ' 0.0'
1209	i = 1
1210	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1211
1212	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1213	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1214
1215	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1216	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1217
1218	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1219	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1220
1221	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1222	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1223
1224	IF ( i == 10 ) THEN
1225	EXIT
1226	ELSE
1227	i = i + 1
1228	ENDIF
1229
1230	ENDDO
1231
1232	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1233	TRIM( gradients ), TRIM( slices )
1234
1235	!-- Profile of the geostrophic wind (component vg)
1236	!-- Building output strings
1237	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1238	gradients = '------'
1239	slices = ' 0'
1240	coordinates = ' 0.0'
1241	i = 1
1242	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1243
1244	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1245	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1246
1247	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1248	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1249
1250	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1251	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1252
1253	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1254	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1255
1256	IF ( i == 10 ) THEN
1257	EXIT
1258	ELSE
1259	i = i + 1
1260	ENDIF
1261
1262	ENDDO
1263
1264	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1265	TRIM( gradients ), TRIM( slices )
1266
1267	!
1268	!-- Initial wind profiles
1269	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1270
1271	!
1272	!-- Initial temperature profile
1273	!-- Building output strings, starting with surface temperature
1274	WRITE ( temperatures, '(F6.2)' ) pt_surface
1275	gradients = '------'
1276	slices = ' 0'
1277	coordinates = ' 0.0'
1278	i = 1
1279	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1280
1281	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1282	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1283
1284	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1285	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1286
1287	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1288	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1289
1290	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1291	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1292
1293	IF ( i == 10 ) THEN
1294	EXIT
1295	ELSE
1296	i = i + 1
1297	ENDIF
1298
1299	ENDDO
1300
1301	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1302	TRIM( gradients ), TRIM( slices )
1303
1304	!
1305	!-- Initial humidity profile
1306	!-- Building output strings, starting with surface humidity
1307	IF ( humidity .OR. passive_scalar ) THEN
1308	WRITE ( temperatures, '(E8.1)' ) q_surface
1309	gradients = '--------'
1310	slices = ' 0'
1311	coordinates = ' 0.0'
1312	i = 1
1313	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1314
1315	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1316	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1317
1318	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1319	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1320
1321	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1322	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1323
1324	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1325	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1326
1327	IF ( i == 10 ) THEN
1328	EXIT
1329	ELSE
1330	i = i + 1
1331	ENDIF
1332
1333	ENDDO
1334
1335	IF ( humidity ) THEN
1336	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1337	TRIM( gradients ), TRIM( slices )
1338	ELSE
1339	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1340	TRIM( gradients ), TRIM( slices )
1341	ENDIF
1342	ENDIF
1343
1344	!
1345	!-- Initial salinity profile
1346	!-- Building output strings, starting with surface salinity
1347	IF ( ocean ) THEN
1348	WRITE ( temperatures, '(F6.2)' ) sa_surface
1349	gradients = '------'
1350	slices = ' 0'
1351	coordinates = ' 0.0'
1352	i = 1
1353	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1354
1355	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1356	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1357
1358	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1359	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1360
1361	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1362	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1363
1364	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1365	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1366
1367	IF ( i == 10 ) THEN
1368	EXIT
1369	ELSE
1370	i = i + 1
1371	ENDIF
1372
1373	ENDDO
1374
1375	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1376	TRIM( gradients ), TRIM( slices )
1377	ENDIF
1378
1379	!
1380	!-- Profile for the large scale vertial velocity
1381	!-- Building output strings, starting with surface value
1382	IF ( large_scale_subsidence ) THEN
1383	temperatures = ' 0.0'
1384	gradients = '------'
1385	slices = ' 0'
1386	coordinates = ' 0.0'
1387	i = 1
1388	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1389
1390	WRITE (coor_chr,'(E10.2,7X)') &
1391	w_subs(subs_vertical_gradient_level_i(i))
1392	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1393
1394	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1395	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1396
1397	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1398	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1399
1400	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1401	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1402
1403	IF ( i == 10 ) THEN
1404	EXIT
1405	ELSE
1406	i = i + 1
1407	ENDIF
1408
1409	ENDDO
1410
1411	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1412	TRIM( gradients ), TRIM( slices )
1413	ENDIF
1414
1415	!
1416	!-- Cloud physcis parameters / quantities / numerical methods
1417	WRITE ( io, 430 )
1418	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1419	WRITE ( io, 431 )
1420	ELSEIF ( humidity .AND. cloud_physics ) THEN
1421	WRITE ( io, 432 )
1422	IF ( radiation ) WRITE ( io, 132 )
1423	IF ( precipitation ) WRITE ( io, 133 )
1424	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1425	WRITE ( io, 433 )
1426	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1427	IF ( collision_kernel /= 'none' ) THEN
1428	WRITE ( io, 435 ) TRIM( collision_kernel )
1429	IF ( collision_kernel(6:9) == 'fast' ) THEN
1430	WRITE ( io, 436 ) radius_classes, dissipation_classes
1431	ENDIF
1432	ELSE
1433	WRITE ( io, 437 )
1434	ENDIF
1435	ENDIF
1436
1437	!
1438	!-- LES / turbulence parameters
1439	WRITE ( io, 450 )
1440
1441	!--
1442	! ... LES-constants used must still be added here
1443	!--
1444	IF ( constant_diffusion ) THEN
1445	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1446	prandtl_number
1447	ENDIF
1448	IF ( .NOT. constant_diffusion) THEN
1449	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1450	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1451	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1452	ENDIF
1453
1454	!
1455	!-- Special actions during the run
1456	WRITE ( io, 470 )
1457	IF ( create_disturbances ) THEN
1458	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1459	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1460	zu(disturbance_level_ind_t), disturbance_level_ind_t
1461	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1462	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1463	ELSE
1464	WRITE ( io, 473 ) disturbance_energy_limit
1465	ENDIF
1466	WRITE ( io, 474 ) TRIM( random_generator )
1467	ENDIF
1468	IF ( pt_surface_initial_change /= 0.0 ) THEN
1469	WRITE ( io, 475 ) pt_surface_initial_change
1470	ENDIF
1471	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1472	WRITE ( io, 476 ) q_surface_initial_change
1473	ENDIF
1474	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1475	WRITE ( io, 477 ) q_surface_initial_change
1476	ENDIF
1477
1478	IF ( particle_advection ) THEN
1479	!
1480	!-- Particle attributes
1481	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1482	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1483	end_time_prel, dt_sort_particles
1484	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1485	IF ( random_start_position ) WRITE ( io, 481 )
1486	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1487	WRITE ( io, 495 ) total_number_of_particles
1488	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1489	WRITE ( io, 483 ) maximum_number_of_tailpoints
1490	IF ( minimum_tailpoint_distance /= 0 ) THEN
1491	WRITE ( io, 484 ) total_number_of_tails, &
1492	minimum_tailpoint_distance, &
1493	maximum_tailpoint_age
1494	ENDIF
1495	ENDIF
1496	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1497	WRITE ( io, 485 ) dt_write_particle_data
1498	output_format = ' '
1499	IF ( netcdf_output ) THEN
1500	IF ( netcdf_data_format > 1 ) THEN
1501	output_format = 'netcdf (64 bit offset) and binary'
1502	ELSE
1503	output_format = 'netcdf and binary'
1504	ENDIF
1505	ELSE
1506	output_format = 'binary'
1507	ENDIF
1508	WRITE ( io, 344 ) output_format
1509	ENDIF
1510	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1511	IF ( write_particle_statistics ) WRITE ( io, 486 )
1512
1513	WRITE ( io, 487 ) number_of_particle_groups
1514
1515	DO i = 1, number_of_particle_groups
1516	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1517	WRITE ( io, 490 ) i, 0.0
1518	WRITE ( io, 492 )
1519	ELSE
1520	WRITE ( io, 490 ) i, radius(i)
1521	IF ( density_ratio(i) /= 0.0 ) THEN
1522	WRITE ( io, 491 ) density_ratio(i)
1523	ELSE
1524	WRITE ( io, 492 )
1525	ENDIF
1526	ENDIF
1527	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1528	pdx(i), pdy(i), pdz(i)
1529	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1530	ENDDO
1531
1532	ENDIF
1533
1534
1535	!
1536	!-- Parameters of 1D-model
1537	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1538	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1539	mixing_length_1d, dissipation_1d
1540	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1541	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1542	ENDIF
1543	ENDIF
1544
1545	!
1546	!-- User-defined informations
1547	CALL user_header( io )
1548
1549	WRITE ( io, 99 )
1550
1551	!
1552	!-- Write buffer contents to disc immediately
1553	CALL local_flush( io )
1554
1555	!
1556	!-- Here the FORMATs start
1557
1558	99 FORMAT (1X,78('-'))
1559	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1560	1X,'* ',A,' *',9X,A/ &
1561	1X,'***************************',9X,42('-'))
1562	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1563	37X,42('-'))
1564	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1565	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1566	' Run on host: ',A10)
1567	#if defined( __parallel )
1568	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1569	')',1X,A)
1570	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1571	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1572	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1573	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1574	37X,'because the job is running on an SMP-cluster')
1575	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1576	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1577	#endif
1578	110 FORMAT (/' Numerical Schemes:'/ &
1579	' -----------------'/)
1580	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1581	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1582	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1583	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1584	' or Upstream')
1585	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1586	' or Upstream')
1587	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1588	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1589	' Translation velocity = ',A/ &
1590	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1591	122 FORMAT (' --> Time differencing scheme: ',A)
1592	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1593	' maximum damping coefficient: ',F5.3, ' 1/s')
1594	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1595	130 FORMAT (' --> Additional prognostic equation for the total water content')
1596	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1597	F6.2, ' K assumed')
1598	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1599	' effective emissivity scheme')
1600	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1601	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1602	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1603	A,'-cycle)'/ &
1604	' number of grid levels: ',I2/ &
1605	' Gauss-Seidel red/black iterations: ',I2)
1606	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1607	I3,')')
1608	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1609	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1610	I3,')'/ &
1611	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1612	I3,')')
1613	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1614	139 FORMAT (' --> Loop optimization method: ',A)
1615	140 FORMAT (' maximum residual allowed: ',E10.3)
1616	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1617	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1618	'step')
1619	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1620	'kinetic energy')
1621	144 FORMAT (' masking method is used')
1622	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1623	'conserved'/ &
1624	' using the ',A,' mode')
1625	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1626	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1627	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1628	/' starting from dp_level_b =', F8.3, 'm', A /)
1629	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1630	'prognostic equation for')
1631	154 FORMAT (' the potential temperature')
1632	200 FORMAT (//' Run time and time step information:'/ &
1633	' ----------------------------------'/)
1634	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1635	' CFL-factor: ',F4.2)
1636	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1637	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1638	' End time: ',F9.3,' s')
1639	204 FORMAT ( A,F9.3,' s')
1640	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1641	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1642	' CPU-time used: ',F9.3,' s per timestep: ', &
1643	' ',F9.3,' s'/ &
1644	' per second of simulated tim', &
1645	'e: ',F9.3,' s')
1646	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1647	250 FORMAT (//' Computational grid and domain size:'/ &
1648	' ----------------------------------'// &
1649	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1650	' m dz = ',F7.3,' m'/ &
1651	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1652	' m z(u) = ',F10.3,' m'/)
1653	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1654	' factor: ',F5.3/ &
1655	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1656	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1657	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1658	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1659	' degrees')
1660	270 FORMAT (//' Topography informations:'/ &
1661	' -----------------------'// &
1662	1X,'Topography: ',A)
1663	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1664	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1665	' / ',I4)
1666	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1667	' direction' / &
1668	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1669	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1670	278 FORMAT (' Topography grid definition convention:'/ &
1671	' cell edge (staggered grid points'/ &
1672	' (u in x-direction, v in y-direction))' /)
1673	279 FORMAT (' Topography grid definition convention:'/ &
1674	' cell center (scalar grid points)' /)
1675	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1676	' ------------------------------'// &
1677	' Canopy mode: ', A / &
1678	' Canopy top: ',I4 / &
1679	' Leaf drag coefficient: ',F6.2 /)
1680	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1681	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1682	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1683	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1684	' Height: ',A,' m'/ &
1685	' Leaf area density: ',A,' m2/m3'/ &
1686	' Gradient: ',A,' m2/m4'/ &
1687	' Gridpoint: ',A)
1688
1689	300 FORMAT (//' Boundary conditions:'/ &
1690	' -------------------'// &
1691	' p uv ', &
1692	' pt'// &
1693	' B. bound.: ',A/ &
1694	' T. bound.: ',A)
1695	301 FORMAT (/' ',A// &
1696	' B. bound.: ',A/ &
1697	' T. bound.: ',A)
1698	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1699	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1700	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1701	'computational u,v-level:'// &
1702	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1703	' m kappa = ',F4.2/ &
1704	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1705	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1706	307 FORMAT (' Heatflux has a random normal distribution')
1707	308 FORMAT (' Predefined surface temperature')
1708	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1709	310 FORMAT (//' 1D-Model:'// &
1710	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1711	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1712	312 FORMAT (' Predefined surface humidity')
1713	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1714	314 FORMAT (' Predefined scalar value at the surface')
1715	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1716	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1717	'atmosphere model')
1718	317 FORMAT (//' Lateral boundaries:'/ &
1719	' left/right: ',A/ &
1720	' north/south: ',A)
1721	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1722	'damping factor = ',F6.4)
1723	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1724	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1725	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1726	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1727	' v: ',F9.6,' m2/s2')
1728	325 FORMAT (//' List output:'/ &
1729	' -----------'// &
1730	' 1D-Profiles:'/ &
1731	' Output every ',F8.2,' s')
1732	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1733	' Averaging input every ',F8.2,' s')
1734	330 FORMAT (//' Data output:'/ &
1735	' -----------'/)
1736	331 FORMAT (/' 1D-Profiles:')
1737	332 FORMAT (/' ',A)
1738	333 FORMAT (' Output every ',F8.2,' s',/ &
1739	' Time averaged over ',F8.2,' s'/ &
1740	' Averaging input every ',F8.2,' s')
1741	334 FORMAT (/' 2D-Arrays',A,':')
1742	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1743	' Output every ',F8.2,' s ',A/ &
1744	' Cross sections at ',A1,' = ',A/ &
1745	' scalar-coordinates: ',A,' m'/)
1746	336 FORMAT (/' 3D-Arrays',A,':')
1747	337 FORMAT (/' Arrays: ',A/ &
1748	' Output every ',F8.2,' s ',A/ &
1749	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1750	338 FORMAT (' Compressed data output'/ &
1751	' Decimal precision: ',A/)
1752	339 FORMAT (' No output during initial ',F8.2,' s')
1753	340 FORMAT (/' Time series:')
1754	341 FORMAT (' Output every ',F8.2,' s'/)
1755	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1756	' Output every ',F8.2,' s ',A/ &
1757	' Time averaged over ',F8.2,' s'/ &
1758	' Averaging input every ',F8.2,' s'/ &
1759	' Cross sections at ',A1,' = ',A/ &
1760	' scalar-coordinates: ',A,' m'/)
1761	343 FORMAT (/' Arrays: ',A/ &
1762	' Output every ',F8.2,' s ',A/ &
1763	' Time averaged over ',F8.2,' s'/ &
1764	' Averaging input every ',F8.2,' s'/ &
1765	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1766	344 FORMAT (' Output format: ',A/)
1767	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1768	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1769	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1770	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1771	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1772	347 FORMAT (' Variables: ',A/ &
1773	' Output every ',F8.2,' s')
1774	348 FORMAT (' Variables: ',A/ &
1775	' Output every ',F8.2,' s'/ &
1776	' Time averaged over ',F8.2,' s'/ &
1777	' Averaging input every ',F8.2,' s')
1778	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1779	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1780	13(' ',8(F8.2,',')/) )
1781	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1782	'all gridpoints along ',A,'-direction (default).' )
1783	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1784	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1785	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1786	#if defined( __dvrp_graphics )
1787	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1788	' Output every ',F7.1,' s'/ &
1789	' Output mode: ',A/ &
1790	' Host / User: ',A,' / ',A/ &
1791	' Directory: ',A// &
1792	' The sequence contains:')
1793	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1794	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1795	362 FORMAT (/' Slicer plane ',A/ &
1796	' Slicer limits: [',F6.2,',',F6.2,']')
1797	363 FORMAT (/' Particles'/ &
1798	' particle size: ',F7.2,' m')
1799	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1800	F6.2,',',F6.2,']')
1801	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1802	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1803	')'/ &
1804	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1805	' from y = ',F9.1,' m to y = ',F9.1,' m')
1806	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1807	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1808	#endif
1809	#if defined( __spectra )
1810	370 FORMAT (' Spectra:')
1811	371 FORMAT (' Output every ',F7.1,' s'/)
1812	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1813	' Directions: ', 10(A5,',')/ &
1814	' height levels k = ', 20(I3,',')/ &
1815	' ', 20(I3,',')/ &
1816	' ', 20(I3,',')/ &
1817	' ', 20(I3,',')/ &
1818	' ', 19(I3,','),I3,'.'/ &
1819	' height levels selected for standard plot:'/ &
1820	' k = ', 20(I3,',')/ &
1821	' ', 20(I3,',')/ &
1822	' ', 20(I3,',')/ &
1823	' ', 20(I3,',')/ &
1824	' ', 19(I3,','),I3,'.'/ &
1825	' Time averaged over ', F7.1, ' s,' / &
1826	' Profiles for the time averaging are taken every ', &
1827	F6.1,' s')
1828	#endif
1829	400 FORMAT (//' Physical quantities:'/ &
1830	' -------------------'/)
1831	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1832	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1833	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1834	' f* = ',F9.6,' 1/s')
1835	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1836	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1837	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1838	415 FORMAT (/' Cloud physics parameters:'/ &
1839	' ------------------------'/)
1840	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1841	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1842	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1843	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1844	' Vapourization heat : L_v = ',E8.2,' J/kg')
1845	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1846	' Height: ',A,' m'/ &
1847	' Temperature: ',A,' K'/ &
1848	' Gradient: ',A,' K/100m'/ &
1849	' Gridpoint: ',A)
1850	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1851	' Height: ',A,' m'/ &
1852	' Humidity: ',A,' kg/kg'/ &
1853	' Gradient: ',A,' (kg/kg)/100m'/ &
1854	' Gridpoint: ',A)
1855	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1856	' Height: ',A,' m'/ &
1857	' Scalar concentration: ',A,' kg/m**3'/ &
1858	' Gradient: ',A,' (kg/m**3)/100m'/ &
1859	' Gridpoint: ',A)
1860	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1861	' Height: ',A,' m'/ &
1862	' ug: ',A,' m/s'/ &
1863	' Gradient: ',A,' 1/100s'/ &
1864	' Gridpoint: ',A)
1865	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1866	' Height: ',A,' m'/ &
1867	' vg: ',A,' m/s'/ &
1868	' Gradient: ',A,' 1/100s'/ &
1869	' Gridpoint: ',A)
1870	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1871	' Height: ',A,' m'/ &
1872	' Salinity: ',A,' psu'/ &
1873	' Gradient: ',A,' psu/100m'/ &
1874	' Gridpoint: ',A)
1875	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1876	' Height: ',A,' m'/ &
1877	' w_subs: ',A,' m/s'/ &
1878	' Gradient: ',A,' (m/s)/100m'/ &
1879	' Gridpoint: ',A)
1880	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1881	' profiles')
1882	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1883	' ----------------------------------'/)
1884	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1885	'on)')
1886	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1887	' total water content is used.'/ &
1888	' Condensation is parameterized via 0% - or 100% scheme.')
1889	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1890	'icle model')
1891	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1892	' droplets < 1.0E-6 m')
1893	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1894	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1895	'are used'/ &
1896	' number of radius classes: ',I3,' interval ', &
1897	'[1.0E-6,2.0E-4] m'/ &
1898	' number of dissipation classes: ',I2,' interval ', &
1899	'[0,1000] cm2/s3')
1900	437 FORMAT (' Droplet collision is switched off')
1901	450 FORMAT (//' LES / Turbulence quantities:'/ &
1902	' ---------------------------'/)
1903	451 FORMAT (' Diffusion coefficients are constant:'/ &
1904	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1905	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1906	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1907	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1908	470 FORMAT (//' Actions during the simulation:'/ &
1909	' -----------------------------'/)
1910	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1911	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1912	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1913	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1914	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1915	' to i/j =',I4)
1916	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1917	1X,F5.3, ' m2/s2')
1918	474 FORMAT (' Random number generator used : ',A/)
1919	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1920	'respectively, if'/ &
1921	' the value is negative) by ',F5.2,' K at the beginning of the',&
1922	' 3D-simulation'/)
1923	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1924	'respectively, if the'/ &
1925	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1926	' the 3D-simulation'/)
1927	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1928	'respectively, if the'/ &
1929	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1930	' the 3D-simulation'/)
1931	480 FORMAT (' Particles:'/ &
1932	' ---------'// &
1933	' Particle advection is active (switched on at t = ', F7.1, &
1934	' s)'/ &
1935	' Start of new particle generations every ',F6.1,' s'/ &
1936	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1937	' bottom: ', A, ' top: ', A/&
1938	' Maximum particle age: ',F9.1,' s'/ &
1939	' Advection stopped at t = ',F9.1,' s'/ &
1940	' Particles are sorted every ',F9.1,' s'/)
1941	481 FORMAT (' Particles have random start positions'/)
1942	482 FORMAT (' Particles are advected only horizontally'/)
1943	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1944	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1945	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1946	' Maximum age of the end of the tail: ',F8.2,' s')
1947	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1948	486 FORMAT (' Particle statistics are written on file'/)
1949	487 FORMAT (' Number of particle groups: ',I2/)
1950	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1951	' minimum timestep for advection: ', F7.5/)
1952	489 FORMAT (' Number of particles simultaneously released at each ', &
1953	'point: ', I5/)
1954	490 FORMAT (' Particle group ',I2,':'/ &
1955	' Particle radius: ',E10.3, 'm')
1956	491 FORMAT (' Particle inertia is activated'/ &
1957	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1958	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1959	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1960	' y:',F8.1,' - ',F8.1,' m'/&
1961	' z:',F8.1,' - ',F8.1,' m'/&
1962	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1963	' m dz = ',F8.1,' m'/)
1964	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1965	F8.2,' s'/)
1966	495 FORMAT (' Number of particles in total domain: ',I10/)
1967	500 FORMAT (//' 1D-Model parameters:'/ &
1968	' -------------------'// &
1969	' Simulation time: ',F8.1,' s'/ &
1970	' Run-controll output every: ',F8.1,' s'/ &
1971	' Vertical profile output every: ',F8.1,' s'/ &
1972	' Mixing length calculation: ',A/ &
1973	' Dissipation calculation: ',A/)
1974	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1975	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
1976	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
1977
1978
1979	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |