Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 98

Last change on this file since 98 was 98, checked in by raasch, 17 years ago
updating comments and rc-file
Property svn:keywords set to `Id`
File size: 57.6 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 98 2007-06-21 09:36:33Z raasch $
11	!
12	! 97 2007-06-21 08:23:15Z raasch
13	! Adjustments for the ocean version.
14	! use_pt_reference renamed use_reference
15	!
16	! 87 2007-05-22 15:46:47Z raasch
17	! Bugfix: output of use_upstream_for_tke
18	!
19	! 82 2007-04-16 15:40:52Z raasch
20	! Preprocessor strings for different linux clusters changed to "lc",
21	! routine local_flush is used for buffer flushing
22	!
23	! 76 2007-03-29 00:58:32Z raasch
24	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
25	! output of the loop optimization method, moisture renamed humidity,
26	! output of subversion revision number
27	!
28	! 19 2007-02-23 04:53:48Z raasch
29	! Output of scalar flux applied at top boundary
30	!
31	! RCS Log replace by Id keyword, revision history cleaned up
32	!
33	! Revision 1.63 2006/08/22 13:53:13 raasch
34	! Output of dz_max
35	!
36	! Revision 1.1 1997/08/11 06:17:20 raasch
37	! Initial revision
38	!
39	!
40	! Description:
41	! ------------
42	! Writing a header with all important informations about the actual run.
43	! This subroutine is called three times, two times at the beginning
44	! (writing information on files RUN_CONTROL and HEADER) and one time at the
45	! end of the run, then writing additional information about CPU-usage on file
46	! header.
47	!------------------------------------------------------------------------------!
48
49	USE arrays_3d
50	USE control_parameters
51	USE cloud_parameters
52	USE cpulog
53	USE dvrp_variables
54	USE grid_variables
55	USE indices
56	USE model_1d
57	USE particle_attributes
58	USE pegrid
59	USE spectrum
60
61	IMPLICIT NONE
62
63	CHARACTER (LEN=1) :: prec
64	CHARACTER (LEN=2) :: do2d_mode
65	CHARACTER (LEN=5) :: section_chr
66	CHARACTER (LEN=9) :: time_to_string
67	CHARACTER (LEN=10) :: coor_chr, host_chr
68	CHARACTER (LEN=16) :: begin_chr
69	CHARACTER (LEN=21) :: ver_rev
70	CHARACTER (LEN=40) :: output_format
71	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
72	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
73	run_classification, slices, temperatures, &
74	ugcomponent, vgcomponent
75	CHARACTER (LEN=85) :: roben, runten
76
77	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
78	REAL :: cpuseconds_per_simulated_second
79
80	!
81	!-- Open the output file. At the end of the simulation, output is directed
82	!-- to unit 19.
83	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
84	.NOT. simulated_time_at_begin /= simulated_time ) THEN
85	io = 15 ! header output on file RUN_CONTROL
86	ELSE
87	io = 19 ! header output on file HEADER
88	ENDIF
89	CALL check_open( io )
90
91	!
92	!-- At the end of the run, output file (HEADER) will be rewritten with
93	!-- new informations
94	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
95
96	!
97	!-- Determine kind of model run
98	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
99	run_classification = '3D - restart run'
100	ELSE
101	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
102	run_classification = '3D - run without 1D - prerun'
103	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
104	run_classification = '3D - run with 1D - prerun'
105	ELSE
106	PRINT*,'+++ header: unknown action(s): ',initializing_actions
107	ENDIF
108	ENDIF
109	IF ( ocean ) THEN
110	run_classification = 'ocean - ' // run_classification
111	ELSE
112	run_classification = 'atmosphere - ' // run_classification
113	ENDIF
114
115	!
116	!-- Run-identification, date, time, host
117	host_chr = host(1:10)
118	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
119	WRITE ( io, 100 ) ver_rev, TRIM( run_classification ), run_date, &
120	run_identifier, run_time, runnr, ADJUSTR( host_chr )
121	#if defined( __parallel )
122	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
123	char1 = 'calculated'
124	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
125	host(1:2) == 'lc' ) .AND. &
126	npex == -1 .AND. pdims(2) == 1 ) THEN
127	char1 = 'forced'
128	ELSE
129	char1 = 'predefined'
130	ENDIF
131	IF ( threads_per_task == 1 ) THEN
132	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
133	ELSE
134	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
135	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
136	ENDIF
137	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
138	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
139	npex == -1 .AND. pdims(2) == 1 ) &
140	THEN
141	WRITE ( io, 104 )
142	ELSEIF ( pdims(2) == 1 ) THEN
143	WRITE ( io, 105 ) 'x'
144	ELSEIF ( pdims(1) == 1 ) THEN
145	WRITE ( io, 105 ) 'y'
146	ENDIF
147	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
148	#endif
149	WRITE ( io, 99 )
150
151	!
152	!-- Numerical schemes
153	WRITE ( io, 110 )
154	IF ( psolver(1:7) == 'poisfft' ) THEN
155	WRITE ( io, 111 ) TRIM( fft_method )
156	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
157	ELSEIF ( psolver == 'sor' ) THEN
158	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
159	ELSEIF ( psolver == 'multigrid' ) THEN
160	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
161	IF ( mg_cycles == -1 ) THEN
162	WRITE ( io, 140 ) residual_limit
163	ELSE
164	WRITE ( io, 141 ) mg_cycles
165	ENDIF
166	IF ( mg_switch_to_pe0_level == 0 ) THEN
167	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
168	nzt_mg(1)
169	ELSE
170	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
171	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
172	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
173	nzt_mg(mg_switch_to_pe0_level), &
174	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
175	nzt_mg(1)
176	ENDIF
177	ENDIF
178	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
179	THEN
180	WRITE ( io, 142 )
181	ENDIF
182
183	IF ( momentum_advec == 'pw-scheme' ) THEN
184	WRITE ( io, 113 )
185	ELSE
186	WRITE ( io, 114 )
187	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
188	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
189	overshoot_limit_w /= 0.0 ) THEN
190	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
191	overshoot_limit_w
192	ENDIF
193	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
194	ups_limit_w /= 0.0 ) &
195	THEN
196	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
197	ENDIF
198	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
199	ENDIF
200	IF ( scalar_advec == 'pw-scheme' ) THEN
201	WRITE ( io, 116 )
202	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
203	WRITE ( io, 117 )
204	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
205	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
206	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
207	ENDIF
208	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
209	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
210	ENDIF
211	ELSE
212	WRITE ( io, 118 )
213	ENDIF
214
215	WRITE ( io, 139 ) TRIM( loop_optimization )
216
217	IF ( galilei_transformation ) THEN
218	IF ( use_ug_for_galilei_tr ) THEN
219	char1 = 'geostrophic wind'
220	ELSE
221	char1 = 'mean wind in model domain'
222	ENDIF
223	IF ( simulated_time_at_begin == simulated_time ) THEN
224	char2 = 'at the start of the run'
225	ELSE
226	char2 = 'at the end of the run'
227	ENDIF
228	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
229	advected_distance_x/1000.0, advected_distance_y/1000.0
230	ENDIF
231	IF ( timestep_scheme == 'leapfrog' ) THEN
232	WRITE ( io, 120 )
233	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
234	WRITE ( io, 121 )
235	ELSE
236	WRITE ( io, 122 ) timestep_scheme
237	ENDIF
238	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
239	IF ( rayleigh_damping_factor /= 0.0 ) THEN
240	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
241	ENDIF
242	IF ( humidity ) THEN
243	IF ( .NOT. cloud_physics ) THEN
244	WRITE ( io, 129 )
245	ELSE
246	WRITE ( io, 130 )
247	WRITE ( io, 131 )
248	IF ( radiation ) WRITE ( io, 132 )
249	IF ( precipitation ) WRITE ( io, 133 )
250	ENDIF
251	ENDIF
252	IF ( passive_scalar ) WRITE ( io, 134 )
253	IF ( conserve_volume_flow ) WRITE ( io, 150 )
254	WRITE ( io, 99 )
255
256	!
257	!-- Runtime and timestep informations
258	WRITE ( io, 200 )
259	IF ( .NOT. dt_fixed ) THEN
260	WRITE ( io, 201 ) dt_max, cfl_factor
261	ELSE
262	WRITE ( io, 202 ) dt
263	ENDIF
264	WRITE ( io, 203 ) simulated_time_at_begin, end_time
265
266	IF ( time_restart /= 9999999.9 .AND. &
267	simulated_time_at_begin == simulated_time ) THEN
268	IF ( dt_restart == 9999999.9 ) THEN
269	WRITE ( io, 204 ) ' Restart at: ',time_restart
270	ELSE
271	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
272	ENDIF
273	ENDIF
274
275	IF ( simulated_time_at_begin /= simulated_time ) THEN
276	i = MAX ( log_point_s(10)%counts, 1 )
277	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
278	cpuseconds_per_simulated_second = 0.0
279	ELSE
280	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
281	( simulated_time - &
282	simulated_time_at_begin )
283	ENDIF
284	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
285	log_point_s(10)%sum / REAL( i ), &
286	cpuseconds_per_simulated_second
287	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
288	IF ( dt_restart == 9999999.9 ) THEN
289	WRITE ( io, 204 ) ' Next restart at: ',time_restart
290	ELSE
291	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
292	ENDIF
293	ENDIF
294	ENDIF
295
296	!
297	!-- Computational grid
298	IF ( .NOT. ocean ) THEN
299	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
300	IF ( dz_stretch_level_index < nzt+1 ) THEN
301	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
302	dz_stretch_factor, dz_max
303	ENDIF
304	ELSE
305	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
306	IF ( dz_stretch_level_index > 0 ) THEN
307	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
308	dz_stretch_factor, dz_max
309	ENDIF
310	ENDIF
311	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
312	MIN( nnz+2, nzt+2 )
313	IF ( numprocs > 1 ) THEN
314	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
315	WRITE ( io, 255 )
316	ELSE
317	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
318	ENDIF
319	ENDIF
320	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
321
322	!
323	!-- Topography
324	WRITE ( io, 270 ) topography
325	SELECT CASE ( TRIM( topography ) )
326
327	CASE ( 'flat' )
328	! no actions necessary
329
330	CASE ( 'single_building' )
331	blx = INT( building_length_x / dx )
332	bly = INT( building_length_y / dy )
333	bh = INT( building_height / dz )
334
335	IF ( building_wall_left == 9999999.9 ) THEN
336	building_wall_left = ( nx + 1 - blx ) / 2 * dx
337	ENDIF
338	bxl = INT ( building_wall_left / dx + 0.5 )
339	bxr = bxl + blx
340
341	IF ( building_wall_south == 9999999.9 ) THEN
342	building_wall_south = ( ny + 1 - bly ) / 2 * dy
343	ENDIF
344	bys = INT ( building_wall_south / dy + 0.5 )
345	byn = bys + bly
346
347	WRITE ( io, 271 ) building_length_x, building_length_y, &
348	building_height, bxl, bxr, bys, byn
349
350	END SELECT
351
352	!
353	!-- Boundary conditions
354	IF ( ibc_p_b == 0 ) THEN
355	runten = 'p(0) = 0 \|'
356	ELSEIF ( ibc_p_b == 1 ) THEN
357	runten = 'p(0) = p(1) \|'
358	ELSE
359	runten = 'p(0) = p(1) +R\|'
360	ENDIF
361	IF ( ibc_p_t == 0 ) THEN
362	roben = 'p(nzt+1) = 0 \|'
363	ELSE
364	roben = 'p(nzt+1) = p(nzt) \|'
365	ENDIF
366
367	IF ( ibc_uv_b == 0 ) THEN
368	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
369	ELSE
370	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
371	ENDIF
372	IF ( ibc_uv_t == 0 ) THEN
373	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
374	ELSE
375	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
376	ENDIF
377
378	IF ( ibc_pt_b == 0 ) THEN
379	runten = TRIM( runten ) // ' pt(0) = pt_surface'
380	ELSE
381	runten = TRIM( runten ) // ' pt(0) = pt(1)'
382	ENDIF
383	IF ( ibc_pt_t == 0 ) THEN
384	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
385	ELSEIF( ibc_pt_t == 1 ) THEN
386	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
387	ELSEIF( ibc_pt_t == 2 ) THEN
388	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
389	ENDIF
390
391	WRITE ( io, 300 ) runten, roben
392
393	IF ( .NOT. constant_diffusion ) THEN
394	IF ( ibc_e_b == 1 ) THEN
395	runten = 'e(0) = e(1)'
396	ELSE
397	runten = 'e(0) = e(1) = (u/0.1)*2'
398	ENDIF
399	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
400
401	WRITE ( io, 301 ) 'e', runten, roben
402
403	ENDIF
404
405	IF ( ocean ) THEN
406	runten = 'sa(0) = sa(1)'
407	IF ( ibc_sa_t == 0 ) THEN
408	roben = 'sa(nzt+1) = sa_surface'
409	ELSE
410	roben = 'sa(nzt+1) = sa(nzt)'
411	ENDIF
412	WRITE ( io, 301 ) 'sa', runten, roben
413	ENDIF
414
415	IF ( humidity ) THEN
416	IF ( ibc_q_b == 0 ) THEN
417	runten = 'q(0) = q_surface'
418	ELSE
419	runten = 'q(0) = q(1)'
420	ENDIF
421	IF ( ibc_q_t == 0 ) THEN
422	roben = 'q(nzt) = q_top'
423	ELSE
424	roben = 'q(nzt) = q(nzt-1) + dq/dz'
425	ENDIF
426	WRITE ( io, 301 ) 'q', runten, roben
427	ENDIF
428
429	IF ( passive_scalar ) THEN
430	IF ( ibc_q_b == 0 ) THEN
431	runten = 's(0) = s_surface'
432	ELSE
433	runten = 's(0) = s(1)'
434	ENDIF
435	IF ( ibc_q_t == 0 ) THEN
436	roben = 's(nzt) = s_top'
437	ELSE
438	roben = 's(nzt) = s(nzt-1) + ds/dz'
439	ENDIF
440	WRITE ( io, 301 ) 's', runten, roben
441	ENDIF
442
443	IF ( use_surface_fluxes ) THEN
444	WRITE ( io, 303 )
445	IF ( constant_heatflux ) THEN
446	WRITE ( io, 306 ) surface_heatflux
447	IF ( random_heatflux ) WRITE ( io, 307 )
448	ENDIF
449	IF ( humidity .AND. constant_waterflux ) THEN
450	WRITE ( io, 311 ) surface_waterflux
451	ENDIF
452	IF ( passive_scalar .AND. constant_waterflux ) THEN
453	WRITE ( io, 313 ) surface_waterflux
454	ENDIF
455	ENDIF
456
457	IF ( use_top_fluxes ) THEN
458	WRITE ( io, 304 )
459	IF ( constant_top_heatflux ) THEN
460	WRITE ( io, 306 ) top_heatflux
461	ENDIF
462	IF ( ocean .AND. constant_top_salinityflux ) THEN
463	WRITE ( io, 309 ) top_salinityflux
464	ENDIF
465	IF ( humidity .OR. passive_scalar ) THEN
466	WRITE ( io, 315 )
467	ENDIF
468	ENDIF
469
470	IF ( prandtl_layer ) THEN
471	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
472	rif_min, rif_max
473	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
474	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
475	WRITE ( io, 312 )
476	ENDIF
477	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
478	WRITE ( io, 314 )
479	ENDIF
480	ELSE
481	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
482	WRITE ( io, 310 ) rif_min, rif_max
483	ENDIF
484	ENDIF
485
486	WRITE ( io, 317 ) bc_lr, bc_ns
487	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
488	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
489	ENDIF
490
491	!
492	!-- Listing of 1D-profiles
493	WRITE ( io, 320 ) dt_dopr_listing
494	IF ( averaging_interval_pr /= 0.0 ) THEN
495	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
496	ENDIF
497
498	!
499	!-- DATA output
500	WRITE ( io, 330 )
501	IF ( averaging_interval_pr /= 0.0 ) THEN
502	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
503	ENDIF
504
505	!
506	!-- 1D-profiles
507	dopr_chr = 'Profile:'
508	IF ( dopr_n /= 0 ) THEN
509	WRITE ( io, 331 )
510
511	output_format = ''
512	IF ( netcdf_output ) THEN
513	IF ( netcdf_64bit ) THEN
514	output_format = 'netcdf (64 bit offset)'
515	ELSE
516	output_format = 'netcdf'
517	ENDIF
518	ENDIF
519	IF ( profil_output ) THEN
520	IF ( netcdf_output ) THEN
521	output_format = TRIM( output_format ) // ' and profil'
522	ELSE
523	output_format = 'profil'
524	ENDIF
525	ENDIF
526	WRITE ( io, 345 ) output_format
527
528	DO i = 1, dopr_n
529	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
530	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
531	WRITE ( io, 332 ) dopr_chr
532	dopr_chr = ' :'
533	ENDIF
534	ENDDO
535
536	IF ( dopr_chr /= '' ) THEN
537	WRITE ( io, 332 ) dopr_chr
538	ENDIF
539	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
540	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
541	ENDIF
542
543	!
544	!-- 2D-arrays
545	DO av = 0, 1
546
547	i = 1
548	do2d_xy = ''
549	do2d_xz = ''
550	do2d_yz = ''
551	DO WHILE ( do2d(av,i) /= ' ' )
552
553	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
554	do2d_mode = do2d(av,i)(l-1:l)
555
556	SELECT CASE ( do2d_mode )
557	CASE ( 'xy' )
558	ll = LEN_TRIM( do2d_xy )
559	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
560	CASE ( 'xz' )
561	ll = LEN_TRIM( do2d_xz )
562	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
563	CASE ( 'yz' )
564	ll = LEN_TRIM( do2d_yz )
565	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
566	END SELECT
567
568	i = i + 1
569
570	ENDDO
571
572	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
573	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
574	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
575	( netcdf_output .OR. iso2d_output ) ) THEN
576
577	IF ( av == 0 ) THEN
578	WRITE ( io, 334 ) ''
579	ELSE
580	WRITE ( io, 334 ) '(time-averaged)'
581	ENDIF
582
583	IF ( do2d_at_begin ) THEN
584	begin_chr = 'and at the start'
585	ELSE
586	begin_chr = ''
587	ENDIF
588
589	output_format = ''
590	IF ( netcdf_output ) THEN
591	IF ( netcdf_64bit ) THEN
592	output_format = 'netcdf (64 bit offset)'
593	ELSE
594	output_format = 'netcdf'
595	ENDIF
596	ENDIF
597	IF ( iso2d_output ) THEN
598	IF ( netcdf_output ) THEN
599	output_format = TRIM( output_format ) // ' and iso2d'
600	ELSE
601	output_format = 'iso2d'
602	ENDIF
603	ENDIF
604	WRITE ( io, 345 ) output_format
605
606	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
607	i = 1
608	slices = '/'
609	coordinates = '/'
610	!
611	!-- Building strings with index and coordinate informations of the
612	!-- slices
613	DO WHILE ( section(i,1) /= -9999 )
614
615	WRITE (section_chr,'(I5)') section(i,1)
616	section_chr = ADJUSTL( section_chr )
617	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
618
619	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
620	coor_chr = ADJUSTL( coor_chr )
621	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
622
623	i = i + 1
624	ENDDO
625	IF ( av == 0 ) THEN
626	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
627	TRIM( begin_chr ), 'k', TRIM( slices ), &
628	TRIM( coordinates )
629	IF ( skip_time_do2d_xy /= 0.0 ) THEN
630	WRITE ( io, 339 ) skip_time_do2d_xy
631	ENDIF
632	ELSE
633	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
634	TRIM( begin_chr ), averaging_interval, &
635	dt_averaging_input, 'k', TRIM( slices ), &
636	TRIM( coordinates )
637	IF ( skip_time_data_output_av /= 0.0 ) THEN
638	WRITE ( io, 339 ) skip_time_data_output_av
639	ENDIF
640	ENDIF
641
642	ENDIF
643
644	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
645	i = 1
646	slices = '/'
647	coordinates = '/'
648	!
649	!-- Building strings with index and coordinate informations of the
650	!-- slices
651	DO WHILE ( section(i,2) /= -9999 )
652
653	WRITE (section_chr,'(I5)') section(i,2)
654	section_chr = ADJUSTL( section_chr )
655	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
656
657	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
658	coor_chr = ADJUSTL( coor_chr )
659	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
660
661	i = i + 1
662	ENDDO
663	IF ( av == 0 ) THEN
664	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
665	TRIM( begin_chr ), 'j', TRIM( slices ), &
666	TRIM( coordinates )
667	IF ( skip_time_do2d_xz /= 0.0 ) THEN
668	WRITE ( io, 339 ) skip_time_do2d_xz
669	ENDIF
670	ELSE
671	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
672	TRIM( begin_chr ), averaging_interval, &
673	dt_averaging_input, 'j', TRIM( slices ), &
674	TRIM( coordinates )
675	IF ( skip_time_data_output_av /= 0.0 ) THEN
676	WRITE ( io, 339 ) skip_time_data_output_av
677	ENDIF
678	ENDIF
679	ENDIF
680
681	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
682	i = 1
683	slices = '/'
684	coordinates = '/'
685	!
686	!-- Building strings with index and coordinate informations of the
687	!-- slices
688	DO WHILE ( section(i,3) /= -9999 )
689
690	WRITE (section_chr,'(I5)') section(i,3)
691	section_chr = ADJUSTL( section_chr )
692	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
693
694	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
695	coor_chr = ADJUSTL( coor_chr )
696	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
697
698	i = i + 1
699	ENDDO
700	IF ( av == 0 ) THEN
701	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
702	TRIM( begin_chr ), 'i', TRIM( slices ), &
703	TRIM( coordinates )
704	IF ( skip_time_do2d_yz /= 0.0 ) THEN
705	WRITE ( io, 339 ) skip_time_do2d_yz
706	ENDIF
707	ELSE
708	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
709	TRIM( begin_chr ), averaging_interval, &
710	dt_averaging_input, 'i', TRIM( slices ), &
711	TRIM( coordinates )
712	IF ( skip_time_data_output_av /= 0.0 ) THEN
713	WRITE ( io, 339 ) skip_time_data_output_av
714	ENDIF
715	ENDIF
716	ENDIF
717
718	ENDIF
719
720	ENDDO
721
722	!
723	!-- 3d-arrays
724	DO av = 0, 1
725
726	i = 1
727	do3d_chr = ''
728	DO WHILE ( do3d(av,i) /= ' ' )
729
730	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
731	i = i + 1
732
733	ENDDO
734
735	IF ( do3d_chr /= '' ) THEN
736	IF ( av == 0 ) THEN
737	WRITE ( io, 336 ) ''
738	ELSE
739	WRITE ( io, 336 ) '(time-averaged)'
740	ENDIF
741
742	output_format = ''
743	IF ( netcdf_output ) THEN
744	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
745	output_format = 'netcdf (64 bit offset)'
746	ELSE
747	output_format = 'netcdf'
748	ENDIF
749	ENDIF
750	IF ( avs_output ) THEN
751	IF ( netcdf_output ) THEN
752	output_format = TRIM( output_format ) // ' and avs'
753	ELSE
754	output_format = 'avs'
755	ENDIF
756	ENDIF
757	WRITE ( io, 345 ) output_format
758
759	IF ( do3d_at_begin ) THEN
760	begin_chr = 'and at the start'
761	ELSE
762	begin_chr = ''
763	ENDIF
764	IF ( av == 0 ) THEN
765	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
766	zu(nz_do3d), nz_do3d
767	ELSE
768	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
769	TRIM( begin_chr ), averaging_interval, &
770	dt_averaging_input, zu(nz_do3d), nz_do3d
771	ENDIF
772
773	IF ( do3d_compress ) THEN
774	do3d_chr = ''
775	i = 1
776	DO WHILE ( do3d(av,i) /= ' ' )
777
778	SELECT CASE ( do3d(av,i) )
779	CASE ( 'u' )
780	j = 1
781	CASE ( 'v' )
782	j = 2
783	CASE ( 'w' )
784	j = 3
785	CASE ( 'p' )
786	j = 4
787	CASE ( 'pt' )
788	j = 5
789	END SELECT
790	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
791	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
792	':' // prec // ','
793	i = i + 1
794
795	ENDDO
796	WRITE ( io, 338 ) do3d_chr
797
798	ENDIF
799
800	IF ( av == 0 ) THEN
801	IF ( skip_time_do3d /= 0.0 ) THEN
802	WRITE ( io, 339 ) skip_time_do3d
803	ENDIF
804	ELSE
805	IF ( skip_time_data_output_av /= 0.0 ) THEN
806	WRITE ( io, 339 ) skip_time_data_output_av
807	ENDIF
808	ENDIF
809
810	ENDIF
811
812	ENDDO
813
814	!
815	!-- Timeseries
816	IF ( dt_dots /= 9999999.9 ) THEN
817	WRITE ( io, 340 )
818
819	output_format = ''
820	IF ( netcdf_output ) THEN
821	IF ( netcdf_64bit ) THEN
822	output_format = 'netcdf (64 bit offset)'
823	ELSE
824	output_format = 'netcdf'
825	ENDIF
826	ENDIF
827	IF ( profil_output ) THEN
828	IF ( netcdf_output ) THEN
829	output_format = TRIM( output_format ) // ' and profil'
830	ELSE
831	output_format = 'profil'
832	ENDIF
833	ENDIF
834	WRITE ( io, 345 ) output_format
835	WRITE ( io, 341 ) dt_dots
836	ENDIF
837
838	#if defined( __dvrp_graphics )
839	!
840	!-- Dvrp-output
841	IF ( dt_dvrp /= 9999999.9 ) THEN
842	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
843	TRIM( dvrp_username ), TRIM( dvrp_directory )
844	i = 1
845	l = 0
846	DO WHILE ( mode_dvrp(i) /= ' ' )
847	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
848	READ ( mode_dvrp(i), '(10X,I1)' ) j
849	l = l + 1
850	IF ( do3d(0,j) /= ' ' ) THEN
851	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
852	ENDIF
853	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
854	READ ( mode_dvrp(i), '(6X,I1)' ) j
855	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
856	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
857	WRITE ( io, 363 )
858	ENDIF
859	i = i + 1
860	ENDDO
861	ENDIF
862	#endif
863
864	#if defined( __spectra )
865	!
866	!-- Spectra output
867	IF ( dt_dosp /= 9999999.9 ) THEN
868	WRITE ( io, 370 )
869
870	output_format = ''
871	IF ( netcdf_output ) THEN
872	IF ( netcdf_64bit ) THEN
873	output_format = 'netcdf (64 bit offset)'
874	ELSE
875	output_format = 'netcdf'
876	ENDIF
877	ENDIF
878	IF ( profil_output ) THEN
879	IF ( netcdf_output ) THEN
880	output_format = TRIM( output_format ) // ' and profil'
881	ELSE
882	output_format = 'profil'
883	ENDIF
884	ENDIF
885	WRITE ( io, 345 ) output_format
886	WRITE ( io, 371 ) dt_dosp
887	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
888	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
889	( spectra_direction(i), i = 1,10 ), &
890	( comp_spectra_level(i), i = 1,10 ), &
891	( plot_spectra_level(i), i = 1,10 ), &
892	averaging_interval_sp, dt_averaging_input_pr
893	ENDIF
894	#endif
895
896	WRITE ( io, 99 )
897
898	!
899	!-- Physical quantities
900	WRITE ( io, 400 )
901
902	!
903	!-- Geostrophic parameters
904	WRITE ( io, 410 ) omega, phi, f, fs
905
906	!
907	!-- Other quantities
908	WRITE ( io, 411 ) g
909	IF ( use_reference ) THEN
910	IF ( ocean ) THEN
911	WRITE ( io, 412 ) prho_reference
912	ELSE
913	WRITE ( io, 413 ) pt_reference
914	ENDIF
915	ENDIF
916
917	!
918	!-- Cloud physics parameters
919	IF ( cloud_physics ) THEN
920	WRITE ( io, 415 )
921	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
922	ENDIF
923
924	!-- Profile of the geostrophic wind (component ug)
925	!-- Building output strings
926	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
927	gradients = '------'
928	slices = ' 0'
929	coordinates = ' 0.0'
930	i = 1
931	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
932
933	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
934	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
935
936	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
937	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
938
939	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
940	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
941
942	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
943	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
944
945	i = i + 1
946	ENDDO
947
948	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
949	TRIM( gradients ), TRIM( slices )
950
951	!-- Profile of the geostrophic wind (component vg)
952	!-- Building output strings
953	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
954	gradients = '------'
955	slices = ' 0'
956	coordinates = ' 0.0'
957	i = 1
958	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
959
960	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
961	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
962
963	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
964	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
965
966	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
967	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
968
969	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
970	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
971
972	i = i + 1
973	ENDDO
974
975	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
976	TRIM( gradients ), TRIM( slices )
977
978	!
979	!-- Initial temperature profile
980	!-- Building output strings, starting with surface temperature
981	WRITE ( temperatures, '(F6.2)' ) pt_surface
982	gradients = '------'
983	slices = ' 0'
984	coordinates = ' 0.0'
985	i = 1
986	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
987
988	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
989	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
990
991	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
992	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
993
994	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
995	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
996
997	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
998	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
999
1000	i = i + 1
1001	ENDDO
1002
1003	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1004	TRIM( gradients ), TRIM( slices )
1005
1006	!
1007	!-- Initial humidity profile
1008	!-- Building output strings, starting with surface humidity
1009	IF ( humidity .OR. passive_scalar ) THEN
1010	WRITE ( temperatures, '(E8.1)' ) q_surface
1011	gradients = '--------'
1012	slices = ' 0'
1013	coordinates = ' 0.0'
1014	i = 1
1015	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1016
1017	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1018	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1019
1020	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1021	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1022
1023	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1024	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1025
1026	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1027	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1028
1029	i = i + 1
1030	ENDDO
1031
1032	IF ( humidity ) THEN
1033	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1034	TRIM( gradients ), TRIM( slices )
1035	ELSE
1036	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1037	TRIM( gradients ), TRIM( slices )
1038	ENDIF
1039	ENDIF
1040
1041	!
1042	!-- Initial salinity profile
1043	!-- Building output strings, starting with surface salinity
1044	IF ( ocean ) THEN
1045	WRITE ( temperatures, '(F6.2)' ) sa_surface
1046	gradients = '------'
1047	slices = ' 0'
1048	coordinates = ' 0.0'
1049	i = 1
1050	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1051
1052	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1053	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1054
1055	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1056	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1057
1058	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1059	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1060
1061	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1062	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1063
1064	i = i + 1
1065	ENDDO
1066
1067	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1068	TRIM( gradients ), TRIM( slices )
1069	ENDIF
1070
1071	!
1072	!-- LES / turbulence parameters
1073	WRITE ( io, 450 )
1074
1075	!--
1076	! ... LES-constants used must still be added here
1077	!--
1078	IF ( constant_diffusion ) THEN
1079	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1080	prandtl_number
1081	ENDIF
1082	IF ( .NOT. constant_diffusion) THEN
1083	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1084	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1085	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1086	ENDIF
1087
1088	!
1089	!-- Special actions during the run
1090	WRITE ( io, 470 )
1091	IF ( create_disturbances ) THEN
1092	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1093	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1094	zu(disturbance_level_ind_t), disturbance_level_ind_t
1095	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1096	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1097	ELSE
1098	WRITE ( io, 473 ) disturbance_energy_limit
1099	ENDIF
1100	WRITE ( io, 474 ) TRIM( random_generator )
1101	ENDIF
1102	IF ( pt_surface_initial_change /= 0.0 ) THEN
1103	WRITE ( io, 475 ) pt_surface_initial_change
1104	ENDIF
1105	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1106	WRITE ( io, 476 ) q_surface_initial_change
1107	ENDIF
1108	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1109	WRITE ( io, 477 ) q_surface_initial_change
1110	ENDIF
1111
1112	IF ( particle_advection ) THEN
1113	!
1114	!-- Particle attributes
1115	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1116	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1117	end_time_prel
1118	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1119	IF ( random_start_position ) WRITE ( io, 481 )
1120	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1121	WRITE ( io, 495 ) total_number_of_particles
1122	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1123	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1124	WRITE ( io, 483 ) maximum_number_of_tailpoints
1125	IF ( minimum_tailpoint_distance /= 0 ) THEN
1126	WRITE ( io, 484 ) total_number_of_tails, &
1127	minimum_tailpoint_distance, &
1128	maximum_tailpoint_age
1129	ENDIF
1130	ENDIF
1131	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1132	WRITE ( io, 485 ) dt_write_particle_data
1133	output_format = ''
1134	IF ( netcdf_output ) THEN
1135	IF ( netcdf_64bit ) THEN
1136	output_format = 'netcdf (64 bit offset) and binary'
1137	ELSE
1138	output_format = 'netcdf and binary'
1139	ENDIF
1140	ELSE
1141	output_format = 'binary'
1142	ENDIF
1143	WRITE ( io, 345 ) output_format
1144	ENDIF
1145	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1146	IF ( write_particle_statistics ) WRITE ( io, 486 )
1147
1148	WRITE ( io, 487 ) number_of_particle_groups
1149
1150	DO i = 1, number_of_particle_groups
1151	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1152	WRITE ( io, 490 ) i, 0.0
1153	WRITE ( io, 492 )
1154	ELSE
1155	WRITE ( io, 490 ) i, radius(i)
1156	IF ( density_ratio(i) /= 0.0 ) THEN
1157	WRITE ( io, 491 ) density_ratio(i)
1158	ELSE
1159	WRITE ( io, 492 )
1160	ENDIF
1161	ENDIF
1162	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1163	pdx(i), pdy(i), pdz(i)
1164	ENDDO
1165
1166	ENDIF
1167
1168
1169	!
1170	!-- Parameters of 1D-model
1171	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1172	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1173	mixing_length_1d, dissipation_1d
1174	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1175	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1176	ENDIF
1177	ENDIF
1178
1179	!
1180	!-- User-defined informations
1181	CALL user_header( io )
1182
1183	WRITE ( io, 99 )
1184
1185	!
1186	!-- Write buffer contents to disc immediately
1187	CALL local_flush( io )
1188
1189	!
1190	!-- Here the FORMATs start
1191
1192	99 FORMAT (1X,78('-'))
1193	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1194	1X,'* ',A,' *',11X,A/ &
1195	1X,'*************************',11X,42('-')// &
1196	' Date: ',A8,11X,'Run: ',A20/ &
1197	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1198	' Run on host: ',A10)
1199	#if defined( __parallel )
1200	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1201	')',1X,A)
1202	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1203	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1204	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1205	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1206	37X,'because the job is running on an SMP-cluster')
1207	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1208	#endif
1209	110 FORMAT (/' Numerical Schemes:'/ &
1210	' -----------------'/)
1211	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1212	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1213	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1214	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1215	' or Upstream')
1216	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1217	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1218	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1219	' or Upstream')
1220	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1221	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1222	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1223	' Translation velocity = ',A/ &
1224	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1225	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1226	' of timestep changes)')
1227	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1228	' timestep changes')
1229	122 FORMAT (' --> Time differencing scheme: ',A)
1230	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
1231	' maximum damping coefficient: ',F5.3, ' 1/s')
1232	124 FORMAT (' Spline-overshoots are being suppressed')
1233	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1234	' of'/ &
1235	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1236	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1237	' of'/ &
1238	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1239	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1240	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1241	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1242	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1243	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1244	130 FORMAT (' --> Additional prognostic equation for the total water content')
1245	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1246	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1247	' effective emissivity scheme')
1248	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1249	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1250	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1251	A,'-cycle)'/ &
1252	' number of grid levels: ',I2/ &
1253	' Gauss-Seidel red/black iterations: ',I2)
1254	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1255	I3,')')
1256	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1257	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1258	I3,')'/ &
1259	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1260	I3,')')
1261	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1262	139 FORMAT (' --> Loop optimization method: ',A)
1263	140 FORMAT (' maximum residual allowed: ',E10.3)
1264	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1265	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1266	'step')
1267	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1268	'kinetic energy')
1269	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1270	'conserved')
1271	200 FORMAT (//' Run time and time step information:'/ &
1272	' ----------------------------------'/)
1273	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1274	' CFL-factor: ',F4.2)
1275	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1276	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1277	' End time: ',F9.3,' s')
1278	204 FORMAT ( A,F9.3,' s')
1279	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1280	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1281	' CPU-time used: ',F9.3,' s per timestep: ', &
1282	' ',F9.3,' s'/ &
1283	' per second of simulated tim', &
1284	'e: ',F9.3,' s')
1285	250 FORMAT (//' Computational grid and domain size:'/ &
1286	' ----------------------------------'// &
1287	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1288	' m dz = ',F7.3,' m'/ &
1289	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1290	' m z(u) = ',F10.3,' m'/)
1291	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1292	' factor: ',F5.3/ &
1293	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1294	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1295	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1296	255 FORMAT (' Subdomains have equal size')
1297	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1298	'have smaller sizes'/ &
1299	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1300	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1301	' degrees')
1302	270 FORMAT (//' Topography informations:'/ &
1303	' -----------------------'// &
1304	1X,'Topography: ',A)
1305	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1306	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1307	' / ',I4)
1308	300 FORMAT (//' Boundary conditions:'/ &
1309	' -------------------'// &
1310	' p uv ', &
1311	' pt'// &
1312	' B. bound.: ',A/ &
1313	' T. bound.: ',A)
1314	301 FORMAT (/' ',A// &
1315	' B. bound.: ',A/ &
1316	' T. bound.: ',A)
1317	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1318	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1319	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1320	'computational u,v-level:'// &
1321	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1322	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1323	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1324	307 FORMAT (' Heatflux has a random normal distribution')
1325	308 FORMAT (' Predefined surface temperature')
1326	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1327	310 FORMAT (//' 1D-Model:'// &
1328	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1329	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1330	312 FORMAT (' Predefined surface humidity')
1331	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1332	314 FORMAT (' Predefined scalar value at the surface')
1333	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1334	317 FORMAT (//' Lateral boundaries:'/ &
1335	' left/right: ',A/ &
1336	' north/south: ',A)
1337	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1338	'max =',F5.1,' m**2/s')
1339	320 FORMAT (//' List output:'/ &
1340	' -----------'// &
1341	' 1D-Profiles:'/ &
1342	' Output every ',F8.2,' s')
1343	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1344	' Averaging input every ',F8.2,' s')
1345	330 FORMAT (//' Data output:'/ &
1346	' -----------'/)
1347	331 FORMAT (/' 1D-Profiles:')
1348	332 FORMAT (/' ',A)
1349	333 FORMAT (' Output every ',F8.2,' s',/ &
1350	' Time averaged over ',F8.2,' s'/ &
1351	' Averaging input every ',F8.2,' s')
1352	334 FORMAT (/' 2D-Arrays',A,':')
1353	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1354	' Output every ',F8.2,' s ',A/ &
1355	' Cross sections at ',A1,' = ',A/ &
1356	' scalar-coordinates: ',A,' m'/)
1357	336 FORMAT (/' 3D-Arrays',A,':')
1358	337 FORMAT (/' Arrays: ',A/ &
1359	' Output every ',F8.2,' s ',A/ &
1360	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1361	338 FORMAT (' Compressed data output'/ &
1362	' Decimal precision: ',A/)
1363	339 FORMAT (' No output during initial ',F8.2,' s')
1364	340 FORMAT (/' Time series:')
1365	341 FORMAT (' Output every ',F8.2,' s'/)
1366	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1367	' Output every ',F8.2,' s ',A/ &
1368	' Time averaged over ',F8.2,' s'/ &
1369	' Averaging input every ',F8.2,' s'/ &
1370	' Cross sections at ',A1,' = ',A/ &
1371	' scalar-coordinates: ',A,' m'/)
1372	343 FORMAT (/' Arrays: ',A/ &
1373	' Output every ',F8.2,' s ',A/ &
1374	' Time averaged over ',F8.2,' s'/ &
1375	' Averaging input every ',F8.2,' s'/ &
1376	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1377	345 FORMAT (' Output format: ',A/)
1378	#if defined( __dvrp_graphics )
1379	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1380	' Output every ',F7.1,' s'/ &
1381	' Output mode: ',A/ &
1382	' Host / User: ',A,' / ',A/ &
1383	' Directory: ',A// &
1384	' The sequence contains:')
1385	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1386	362 FORMAT (' Sectional plane ',A)
1387	363 FORMAT (' Particles')
1388	#endif
1389	#if defined( __spectra )
1390	370 FORMAT (' Spectra:')
1391	371 FORMAT (' Output every ',F7.1,' s'/)
1392	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1393	' Directions: ', 10(A5,',')/ &
1394	' height levels k = ', 9(I3,','),I3,'.'/ &
1395	' height levels selected for standard plot:'/ &
1396	' k = ', 9(I3,','),I3,'.'/ &
1397	' Time averaged over ', F7.1, ' s,' / &
1398	' Profiles for the time averaging are taken every ', &
1399	F6.1,' s')
1400	#endif
1401	400 FORMAT (//' Physical quantities:'/ &
1402	' -------------------'/)
1403	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1404	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1405	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1406	' f* = ',F9.6,' 1/s')
1407	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1408	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1409	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1410	415 FORMAT (/' Cloud physics parameters:'/ &
1411	' ------------------------'/)
1412	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1413	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1414	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1415	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1416	' Vapourization heat : L_v = ',E8.2,' J/kg')
1417	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1418	' Height: ',A,' m'/ &
1419	' Temperature: ',A,' K'/ &
1420	' Gradient: ',A,' K/100m'/ &
1421	' Gridpoint: ',A)
1422	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1423	' Height: ',A,' m'/ &
1424	' Humidity: ',A,' kg/kg'/ &
1425	' Gradient: ',A,' (kg/kg)/100m'/ &
1426	' Gridpoint: ',A)
1427	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1428	' Height: ',A,' m'/ &
1429	' Scalar concentration: ',A,' kg/m**3'/ &
1430	' Gradient: ',A,' (kg/m**3)/100m'/ &
1431	' Gridpoint: ',A)
1432	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1433	' Height: ',A,' m'/ &
1434	' ug: ',A,' m/s'/ &
1435	' Gradient: ',A,' 1/100s'/ &
1436	' Gridpoint: ',A)
1437	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1438	' Height: ',A,' m'/ &
1439	' vg: ',A,' m/s'/ &
1440	' Gradient: ',A,' 1/100s'/ &
1441	' Gridpoint: ',A)
1442	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1443	' Height: ',A,' m'/ &
1444	' Salinity: ',A,' psu'/ &
1445	' Gradient: ',A,' psu/100m'/ &
1446	' Gridpoint: ',A)
1447	450 FORMAT (//' LES / Turbulence quantities:'/ &
1448	' ---------------------------'/)
1449	451 FORMAT (' Diffusion coefficients are constant:'/ &
1450	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1451	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1452	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1453	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1454	470 FORMAT (//' Actions during the simulation:'/ &
1455	' -----------------------------'/)
1456	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1457	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1458	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1459	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1460	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1461	' to i/j =',I4)
1462	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1463	1X,F5.3, ' m2/s2')
1464	474 FORMAT (' Random number generator used : ',A/)
1465	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1466	'respectively, if'/ &
1467	' the value is negative) by ',F5.2,' K at the beginning of the',&
1468	' 3D-simulation'/)
1469	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1470	'respectively, if the'/ &
1471	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1472	' the 3D-simulation'/)
1473	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1474	'respectively, if the'/ &
1475	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1476	' the 3D-simulation'/)
1477	480 FORMAT (' Particles:'/ &
1478	' ---------'// &
1479	' Particle advection is active (switched on at t = ', F7.1, &
1480	' s)'/ &
1481	' Start of new particle generations every ',F6.1,' s'/ &
1482	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1483	' bottom: ', A, ' top: ', A/&
1484	' Maximum particle age: ',F9.1,' s'/ &
1485	' Advection stopped at t = ',F9.1,' s'/)
1486	481 FORMAT (' Particles have random start positions'/)
1487	482 FORMAT (' Particles are advected only horizontally'/)
1488	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1489	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1490	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1491	' Maximum age of the end of the tail: ',F8.2,' s')
1492	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1493	486 FORMAT (' Particle statistics are written on file'/)
1494	487 FORMAT (' Number of particle groups: ',I2/)
1495	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1496	' minimum timestep for advection: ', F7.5/)
1497	489 FORMAT (' Number of particles simultaneously released at each ', &
1498	'point: ', I5/)
1499	490 FORMAT (' Particle group ',I2,':'/ &
1500	' Particle radius: ',E10.3, 'm')
1501	491 FORMAT (' Particle inertia is activated'/ &
1502	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1503	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1504	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1505	' y:',F8.1,' - ',F8.1,' m'/&
1506	' z:',F8.1,' - ',F8.1,' m'/&
1507	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1508	' m dz = ',F8.1,' m'/)
1509	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1510	F8.2,' s'/)
1511	495 FORMAT (' Number of particles in total domain: ',I10/)
1512	500 FORMAT (//' 1D-Model parameters:'/ &
1513	' -------------------'// &
1514	' Simulation time: ',F8.1,' s'/ &
1515	' Run-controll output every: ',F8.1,' s'/ &
1516	' Vertical profile output every: ',F8.1,' s'/ &
1517	' Mixing length calculation: ',A/ &
1518	' Dissipation calculation: ',A/)
1519	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1520
1521
1522	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |