Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 674

Last change on this file since 674 was 668, checked in by suehring, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.0 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	! Former revisions:
8	! -----------------
9	! $Id: header.f90 668 2010-12-23 13:22:58Z suehring $
10	!
11	! 667 2010-12-23 12:06:00Z suehring/gryschka
12	! Output of advection scheme.
13	! Modified output of Prandtl-layer height.
14	!
15	! 580 2010-10-05 13:59:11Z heinze
16	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
17	! ws_vertical_gradient_level to subs_vertical_gradient_level and
18	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
19	!
20	! 493 2010-03-01 08:30:24Z raasch
21	! NetCDF data output format extendend for NetCDF4/HDF5
22	!
23	! 449 2010-02-02 11:23:59Z raasch
24	! +large scale vertical motion (subsidence/ascent)
25	! Bugfix: index problem concerning gradient_level indices removed
26	!
27	! 410 2009-12-04 17:05:40Z letzel
28	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
29	! mask_scale\|_x\|y\|z, masks, skip_time_domask
30	!
31	! 346 2009-07-06 10:13:41Z raasch
32	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
33	! Coupling with independent precursor runs.
34	! Output of messages replaced by message handling routine.
35	! Output of several additional dvr parameters
36	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
37	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
38	! dp_smooth, dpdxy, u_bulk, v_bulk
39	! topography_grid_convention moved from user_header
40	! small bugfix concerning 3d 64bit netcdf output format
41	!
42	! 206 2008-10-13 14:59:11Z raasch
43	! Bugfix: error in zu index in case of section_xy = -1
44	!
45	! 198 2008-09-17 08:55:28Z raasch
46	! Format adjustments allowing output of larger revision numbers
47	!
48	! 197 2008-09-16 15:29:03Z raasch
49	! allow 100 spectra levels instead of 10 for consistency with
50	! define_netcdf_header,
51	! bugfix in the output of the characteristic levels of potential temperature,
52	! geostrophic wind, scalar concentration, humidity and leaf area density,
53	! output of turbulence recycling informations
54	!
55	! 138 2007-11-28 10:03:58Z letzel
56	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
57	! Allow two instead of one digit to specify isosurface and slicer variables.
58	! Output of sorting frequency of particles
59	!
60	! 108 2007-08-24 15:10:38Z letzel
61	! Output of informations for coupled model runs (boundary conditions etc.)
62	! + output of momentumfluxes at the top boundary
63	! Rayleigh damping for ocean, e_init
64	!
65	! 97 2007-06-21 08:23:15Z raasch
66	! Adjustments for the ocean version.
67	! use_pt_reference renamed use_reference
68	!
69	! 87 2007-05-22 15:46:47Z raasch
70	! Bugfix: output of use_upstream_for_tke
71	!
72	! 82 2007-04-16 15:40:52Z raasch
73	! Preprocessor strings for different linux clusters changed to "lc",
74	! routine local_flush is used for buffer flushing
75	!
76	! 76 2007-03-29 00:58:32Z raasch
77	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
78	! output of the loop optimization method, moisture renamed humidity,
79	! output of subversion revision number
80	!
81	! 19 2007-02-23 04:53:48Z raasch
82	! Output of scalar flux applied at top boundary
83	!
84	! RCS Log replace by Id keyword, revision history cleaned up
85	!
86	! Revision 1.63 2006/08/22 13:53:13 raasch
87	! Output of dz_max
88	!
89	! Revision 1.1 1997/08/11 06:17:20 raasch
90	! Initial revision
91	!
92	!
93	! Description:
94	! ------------
95	! Writing a header with all important informations about the actual run.
96	! This subroutine is called three times, two times at the beginning
97	! (writing information on files RUN_CONTROL and HEADER) and one time at the
98	! end of the run, then writing additional information about CPU-usage on file
99	! header.
100	!-----------------------------------------------------------------------------!
101
102	USE arrays_3d
103	USE control_parameters
104	USE cloud_parameters
105	USE cpulog
106	USE dvrp_variables
107	USE grid_variables
108	USE indices
109	USE model_1d
110	USE particle_attributes
111	USE pegrid
112	USE subsidence_mod
113	USE spectrum
114
115	IMPLICIT NONE
116
117	CHARACTER (LEN=1) :: prec
118	CHARACTER (LEN=2) :: do2d_mode
119	CHARACTER (LEN=5) :: section_chr
120	CHARACTER (LEN=9) :: time_to_string
121	CHARACTER (LEN=10) :: coor_chr, host_chr
122	CHARACTER (LEN=16) :: begin_chr
123	CHARACTER (LEN=23) :: ver_rev
124	CHARACTER (LEN=40) :: output_format
125	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
126	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
127	domask_chr, run_classification
128	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
129	temperatures, ugcomponent, vgcomponent
130	CHARACTER (LEN=85) :: roben, runten
131
132	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
133
134	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
135	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
136	REAL :: cpuseconds_per_simulated_second
137
138	!
139	!-- Open the output file. At the end of the simulation, output is directed
140	!-- to unit 19.
141	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
142	.NOT. simulated_time_at_begin /= simulated_time ) THEN
143	io = 15 ! header output on file RUN_CONTROL
144	ELSE
145	io = 19 ! header output on file HEADER
146	ENDIF
147	CALL check_open( io )
148
149	!
150	!-- At the end of the run, output file (HEADER) will be rewritten with
151	!-- new informations
152	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
153
154	!
155	!-- Determine kind of model run
156	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
157	run_classification = '3D - restart run'
158	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
159	run_classification = '3D - run with cyclic fill of 3D - prerun data'
160	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
161	run_classification = '3D - run without 1D - prerun'
162	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
163	run_classification = '3D - run with 1D - prerun'
164	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
165	run_classification = '3D - run initialized by user'
166	ELSE
167	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
168	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
169	ENDIF
170	IF ( ocean ) THEN
171	run_classification = 'ocean - ' // run_classification
172	ELSE
173	run_classification = 'atmosphere - ' // run_classification
174	ENDIF
175
176	!
177	!-- Run-identification, date, time, host
178	host_chr = host(1:10)
179	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
180	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
181	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
182	#if defined( __mpi2 )
183	mpi_type = 2
184	#else
185	mpi_type = 1
186	#endif
187	WRITE ( io, 101 ) mpi_type, coupling_mode
188	ENDIF
189	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
190	ADJUSTR( host_chr )
191	#if defined( __parallel )
192	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
193	char1 = 'calculated'
194	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
195	host(1:2) == 'lc' ) .AND. &
196	npex == -1 .AND. pdims(2) == 1 ) THEN
197	char1 = 'forced'
198	ELSE
199	char1 = 'predefined'
200	ENDIF
201	IF ( threads_per_task == 1 ) THEN
202	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
203	ELSE
204	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
205	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
206	ENDIF
207	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
208	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
209	npex == -1 .AND. pdims(2) == 1 ) &
210	THEN
211	WRITE ( io, 106 )
212	ELSEIF ( pdims(2) == 1 ) THEN
213	WRITE ( io, 107 ) 'x'
214	ELSEIF ( pdims(1) == 1 ) THEN
215	WRITE ( io, 107 ) 'y'
216	ENDIF
217	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
218	#endif
219	WRITE ( io, 99 )
220
221	!
222	!-- Numerical schemes
223	WRITE ( io, 110 )
224	IF ( psolver(1:7) == 'poisfft' ) THEN
225	WRITE ( io, 111 ) TRIM( fft_method )
226	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
227	ELSEIF ( psolver == 'sor' ) THEN
228	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
229	ELSEIF ( psolver == 'multigrid' ) THEN
230	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
231	IF ( mg_cycles == -1 ) THEN
232	WRITE ( io, 140 ) residual_limit
233	ELSE
234	WRITE ( io, 141 ) mg_cycles
235	ENDIF
236	IF ( mg_switch_to_pe0_level == 0 ) THEN
237	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
238	nzt_mg(1)
239	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
240	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
241	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
242	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
243	nzt_mg(mg_switch_to_pe0_level), &
244	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
245	nzt_mg(1)
246	ENDIF
247	ENDIF
248	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
249	THEN
250	WRITE ( io, 142 )
251	ENDIF
252
253	IF ( momentum_advec == 'pw-scheme' ) THEN
254	WRITE ( io, 113 )
255	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
256	WRITE ( io, 503 )
257	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
258	WRITE ( io, 114 )
259	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
260	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
261	overshoot_limit_w /= 0.0 ) THEN
262	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
263	overshoot_limit_w
264	ENDIF
265	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
266	ups_limit_w /= 0.0 ) &
267	THEN
268	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
269	ENDIF
270	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
271	ENDIF
272	IF ( scalar_advec == 'pw-scheme' ) THEN
273	WRITE ( io, 116 )
274	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
275	WRITE ( io, 504 )
276	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
277	WRITE ( io, 117 )
278	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
279	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
280	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
281	ENDIF
282	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
283	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
284	ENDIF
285	ELSE
286	WRITE ( io, 118 )
287	ENDIF
288
289	WRITE ( io, 139 ) TRIM( loop_optimization )
290
291	IF ( galilei_transformation ) THEN
292	IF ( use_ug_for_galilei_tr ) THEN
293	char1 = 'geostrophic wind'
294	ELSE
295	char1 = 'mean wind in model domain'
296	ENDIF
297	IF ( simulated_time_at_begin == simulated_time ) THEN
298	char2 = 'at the start of the run'
299	ELSE
300	char2 = 'at the end of the run'
301	ENDIF
302	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
303	advected_distance_x/1000.0, advected_distance_y/1000.0
304	ENDIF
305	IF ( timestep_scheme == 'leapfrog' ) THEN
306	WRITE ( io, 120 )
307	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
308	WRITE ( io, 121 )
309	ELSE
310	WRITE ( io, 122 ) timestep_scheme
311	ENDIF
312	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
313	IF ( rayleigh_damping_factor /= 0.0 ) THEN
314	IF ( .NOT. ocean ) THEN
315	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
316	rayleigh_damping_factor
317	ELSE
318	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
319	rayleigh_damping_factor
320	ENDIF
321	ENDIF
322	IF ( humidity ) THEN
323	IF ( .NOT. cloud_physics ) THEN
324	WRITE ( io, 129 )
325	ELSE
326	WRITE ( io, 130 )
327	WRITE ( io, 131 )
328	IF ( radiation ) WRITE ( io, 132 )
329	IF ( precipitation ) WRITE ( io, 133 )
330	ENDIF
331	ENDIF
332	IF ( passive_scalar ) WRITE ( io, 134 )
333	IF ( conserve_volume_flow ) THEN
334	WRITE ( io, 150 ) conserve_volume_flow_mode
335	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
336	WRITE ( io, 151 ) u_bulk, v_bulk
337	ENDIF
338	ELSEIF ( dp_external ) THEN
339	IF ( dp_smooth ) THEN
340	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
341	ELSE
342	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
343	ENDIF
344	ENDIF
345	IF ( large_scale_subsidence ) THEN
346	WRITE ( io, 153 )
347	WRITE ( io, 154 )
348	ENDIF
349	WRITE ( io, 99 )
350
351	!
352	!-- Runtime and timestep informations
353	WRITE ( io, 200 )
354	IF ( .NOT. dt_fixed ) THEN
355	WRITE ( io, 201 ) dt_max, cfl_factor
356	ELSE
357	WRITE ( io, 202 ) dt
358	ENDIF
359	WRITE ( io, 203 ) simulated_time_at_begin, end_time
360
361	IF ( time_restart /= 9999999.9 .AND. &
362	simulated_time_at_begin == simulated_time ) THEN
363	IF ( dt_restart == 9999999.9 ) THEN
364	WRITE ( io, 204 ) ' Restart at: ',time_restart
365	ELSE
366	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
367	ENDIF
368	ENDIF
369
370	IF ( simulated_time_at_begin /= simulated_time ) THEN
371	i = MAX ( log_point_s(10)%counts, 1 )
372	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
373	cpuseconds_per_simulated_second = 0.0
374	ELSE
375	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
376	( simulated_time - &
377	simulated_time_at_begin )
378	ENDIF
379	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
380	log_point_s(10)%sum / REAL( i ), &
381	cpuseconds_per_simulated_second
382	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
383	IF ( dt_restart == 9999999.9 ) THEN
384	WRITE ( io, 204 ) ' Next restart at: ',time_restart
385	ELSE
386	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
387	ENDIF
388	ENDIF
389	ENDIF
390
391	!
392	!-- Start time for coupled runs, if independent precursor runs for atmosphere
393	!-- and ocean are used. In this case, coupling_start_time defines the time
394	!-- when the coupling is switched on.
395	IF ( coupling_start_time /= 0.0 ) THEN
396	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
397	char1 = 'Precursor run for a coupled atmosphere-ocean run'
398	ELSE
399	char1 = 'Coupled atmosphere-ocean run following independent ' // &
400	'precursor runs'
401	ENDIF
402	WRITE ( io, 207 ) char1, coupling_start_time
403	ENDIF
404
405	!
406	!-- Computational grid
407	IF ( .NOT. ocean ) THEN
408	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
409	IF ( dz_stretch_level_index < nzt+1 ) THEN
410	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
411	dz_stretch_factor, dz_max
412	ENDIF
413	ELSE
414	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
415	IF ( dz_stretch_level_index > 0 ) THEN
416	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
417	dz_stretch_factor, dz_max
418	ENDIF
419	ENDIF
420	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
421	MIN( nnz+2, nzt+2 )
422	IF ( numprocs > 1 ) THEN
423	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
424	WRITE ( io, 255 )
425	ELSE
426	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
427	ENDIF
428	ENDIF
429	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
430
431	!
432	!-- Topography
433	WRITE ( io, 270 ) topography
434	SELECT CASE ( TRIM( topography ) )
435
436	CASE ( 'flat' )
437	! no actions necessary
438
439	CASE ( 'single_building' )
440	blx = INT( building_length_x / dx )
441	bly = INT( building_length_y / dy )
442	bh = INT( building_height / dz )
443
444	IF ( building_wall_left == 9999999.9 ) THEN
445	building_wall_left = ( nx + 1 - blx ) / 2 * dx
446	ENDIF
447	bxl = INT ( building_wall_left / dx + 0.5 )
448	bxr = bxl + blx
449
450	IF ( building_wall_south == 9999999.9 ) THEN
451	building_wall_south = ( ny + 1 - bly ) / 2 * dy
452	ENDIF
453	bys = INT ( building_wall_south / dy + 0.5 )
454	byn = bys + bly
455
456	WRITE ( io, 271 ) building_length_x, building_length_y, &
457	building_height, bxl, bxr, bys, byn
458
459	CASE ( 'single_street_canyon' )
460	ch = NINT( canyon_height / dz )
461	IF ( canyon_width_x /= 9999999.9 ) THEN
462	!
463	!-- Street canyon in y direction
464	cwx = NINT( canyon_width_x / dx )
465	IF ( canyon_wall_left == 9999999.9 ) THEN
466	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
467	ENDIF
468	cxl = NINT( canyon_wall_left / dx )
469	cxr = cxl + cwx
470	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
471
472	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
473	!
474	!-- Street canyon in x direction
475	cwy = NINT( canyon_width_y / dy )
476	IF ( canyon_wall_south == 9999999.9 ) THEN
477	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
478	ENDIF
479	cys = NINT( canyon_wall_south / dy )
480	cyn = cys + cwy
481	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
482	ENDIF
483
484	END SELECT
485
486	IF ( TRIM( topography ) /= 'flat' ) THEN
487	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
488	IF ( TRIM( topography ) == 'single_building' .OR. &
489	TRIM( topography ) == 'single_street_canyon' ) THEN
490	WRITE ( io, 278 )
491	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
492	WRITE ( io, 279 )
493	ENDIF
494	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
495	WRITE ( io, 278 )
496	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
497	WRITE ( io, 279 )
498	ENDIF
499	ENDIF
500
501	IF ( plant_canopy ) THEN
502
503	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
504	IF ( passive_scalar ) THEN
505	WRITE ( io, 281 ) scalar_exchange_coefficient, &
506	leaf_surface_concentration
507	ENDIF
508
509	!
510	!-- Heat flux at the top of vegetation
511	WRITE ( io, 282 ) cthf
512
513	!
514	!-- Leaf area density profile
515	!-- Building output strings, starting with surface value
516	WRITE ( learde, '(F6.2)' ) lad_surface
517	gradients = '------'
518	slices = ' 0'
519	coordinates = ' 0.0'
520	i = 1
521	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
522
523	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
524	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
525
526	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
527	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
528
529	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
530	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
531
532	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
533	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
534
535	i = i + 1
536	ENDDO
537
538	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
539	TRIM( gradients ), TRIM( slices )
540
541	ENDIF
542
543	!
544	!-- Boundary conditions
545	IF ( ibc_p_b == 0 ) THEN
546	runten = 'p(0) = 0 \|'
547	ELSEIF ( ibc_p_b == 1 ) THEN
548	runten = 'p(0) = p(1) \|'
549	ELSE
550	runten = 'p(0) = p(1) +R\|'
551	ENDIF
552	IF ( ibc_p_t == 0 ) THEN
553	roben = 'p(nzt+1) = 0 \|'
554	ELSE
555	roben = 'p(nzt+1) = p(nzt) \|'
556	ENDIF
557
558	IF ( ibc_uv_b == 0 ) THEN
559	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
560	ELSE
561	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
562	ENDIF
563	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
564	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
565	ELSEIF ( ibc_uv_t == 0 ) THEN
566	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
567	ELSE
568	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
569	ENDIF
570
571	IF ( ibc_pt_b == 0 ) THEN
572	runten = TRIM( runten ) // ' pt(0) = pt_surface'
573	ELSEIF ( ibc_pt_b == 1 ) THEN
574	runten = TRIM( runten ) // ' pt(0) = pt(1)'
575	ELSEIF ( ibc_pt_b == 2 ) THEN
576	runten = TRIM( runten ) // ' pt(0) = from coupled model'
577	ENDIF
578	IF ( ibc_pt_t == 0 ) THEN
579	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
580	ELSEIF( ibc_pt_t == 1 ) THEN
581	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
582	ELSEIF( ibc_pt_t == 2 ) THEN
583	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
584
585	ENDIF
586
587	WRITE ( io, 300 ) runten, roben
588
589	IF ( .NOT. constant_diffusion ) THEN
590	IF ( ibc_e_b == 1 ) THEN
591	runten = 'e(0) = e(1)'
592	ELSE
593	runten = 'e(0) = e(1) = (u/0.1)*2'
594	ENDIF
595	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
596
597	WRITE ( io, 301 ) 'e', runten, roben
598
599	ENDIF
600
601	IF ( ocean ) THEN
602	runten = 'sa(0) = sa(1)'
603	IF ( ibc_sa_t == 0 ) THEN
604	roben = 'sa(nzt+1) = sa_surface'
605	ELSE
606	roben = 'sa(nzt+1) = sa(nzt)'
607	ENDIF
608	WRITE ( io, 301 ) 'sa', runten, roben
609	ENDIF
610
611	IF ( humidity ) THEN
612	IF ( ibc_q_b == 0 ) THEN
613	runten = 'q(0) = q_surface'
614	ELSE
615	runten = 'q(0) = q(1)'
616	ENDIF
617	IF ( ibc_q_t == 0 ) THEN
618	roben = 'q(nzt) = q_top'
619	ELSE
620	roben = 'q(nzt) = q(nzt-1) + dq/dz'
621	ENDIF
622	WRITE ( io, 301 ) 'q', runten, roben
623	ENDIF
624
625	IF ( passive_scalar ) THEN
626	IF ( ibc_q_b == 0 ) THEN
627	runten = 's(0) = s_surface'
628	ELSE
629	runten = 's(0) = s(1)'
630	ENDIF
631	IF ( ibc_q_t == 0 ) THEN
632	roben = 's(nzt) = s_top'
633	ELSE
634	roben = 's(nzt) = s(nzt-1) + ds/dz'
635	ENDIF
636	WRITE ( io, 301 ) 's', runten, roben
637	ENDIF
638
639	IF ( use_surface_fluxes ) THEN
640	WRITE ( io, 303 )
641	IF ( constant_heatflux ) THEN
642	WRITE ( io, 306 ) surface_heatflux
643	IF ( random_heatflux ) WRITE ( io, 307 )
644	ENDIF
645	IF ( humidity .AND. constant_waterflux ) THEN
646	WRITE ( io, 311 ) surface_waterflux
647	ENDIF
648	IF ( passive_scalar .AND. constant_waterflux ) THEN
649	WRITE ( io, 313 ) surface_waterflux
650	ENDIF
651	ENDIF
652
653	IF ( use_top_fluxes ) THEN
654	WRITE ( io, 304 )
655	IF ( coupling_mode == 'uncoupled' ) THEN
656	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
657	IF ( constant_top_heatflux ) THEN
658	WRITE ( io, 306 ) top_heatflux
659	ENDIF
660	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
661	WRITE ( io, 316 )
662	ENDIF
663	IF ( ocean .AND. constant_top_salinityflux ) THEN
664	WRITE ( io, 309 ) top_salinityflux
665	ENDIF
666	IF ( humidity .OR. passive_scalar ) THEN
667	WRITE ( io, 315 )
668	ENDIF
669	ENDIF
670
671	IF ( prandtl_layer ) THEN
672	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
673	rif_min, rif_max
674	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
675	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
676	WRITE ( io, 312 )
677	ENDIF
678	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
679	WRITE ( io, 314 )
680	ENDIF
681	ELSE
682	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
683	WRITE ( io, 310 ) rif_min, rif_max
684	ENDIF
685	ENDIF
686
687	WRITE ( io, 317 ) bc_lr, bc_ns
688	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
689	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
690	IF ( turbulent_inflow ) THEN
691	WRITE ( io, 319 ) recycling_width, recycling_plane, &
692	inflow_damping_height, inflow_damping_width
693	ENDIF
694	ENDIF
695
696	!
697	!-- Listing of 1D-profiles
698	WRITE ( io, 325 ) dt_dopr_listing
699	IF ( averaging_interval_pr /= 0.0 ) THEN
700	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
701	ENDIF
702
703	!
704	!-- DATA output
705	WRITE ( io, 330 )
706	IF ( averaging_interval_pr /= 0.0 ) THEN
707	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
708	ENDIF
709
710	!
711	!-- 1D-profiles
712	dopr_chr = 'Profile:'
713	IF ( dopr_n /= 0 ) THEN
714	WRITE ( io, 331 )
715
716	output_format = ''
717	IF ( netcdf_output ) THEN
718	IF ( netcdf_data_format == 1 ) THEN
719	output_format = 'NetCDF classic'
720	ELSE
721	output_format = 'NetCDF 64bit offset'
722	ENDIF
723	ENDIF
724	IF ( profil_output ) THEN
725	IF ( netcdf_output ) THEN
726	output_format = TRIM( output_format ) // ' and profil'
727	ELSE
728	output_format = 'profil'
729	ENDIF
730	ENDIF
731	WRITE ( io, 344 ) output_format
732
733	DO i = 1, dopr_n
734	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
735	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
736	WRITE ( io, 332 ) dopr_chr
737	dopr_chr = ' :'
738	ENDIF
739	ENDDO
740
741	IF ( dopr_chr /= '' ) THEN
742	WRITE ( io, 332 ) dopr_chr
743	ENDIF
744	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
745	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
746	ENDIF
747
748	!
749	!-- 2D-arrays
750	DO av = 0, 1
751
752	i = 1
753	do2d_xy = ''
754	do2d_xz = ''
755	do2d_yz = ''
756	DO WHILE ( do2d(av,i) /= ' ' )
757
758	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
759	do2d_mode = do2d(av,i)(l-1:l)
760
761	SELECT CASE ( do2d_mode )
762	CASE ( 'xy' )
763	ll = LEN_TRIM( do2d_xy )
764	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
765	CASE ( 'xz' )
766	ll = LEN_TRIM( do2d_xz )
767	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
768	CASE ( 'yz' )
769	ll = LEN_TRIM( do2d_yz )
770	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
771	END SELECT
772
773	i = i + 1
774
775	ENDDO
776
777	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
778	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
779	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
780	( netcdf_output .OR. iso2d_output ) ) THEN
781
782	IF ( av == 0 ) THEN
783	WRITE ( io, 334 ) ''
784	ELSE
785	WRITE ( io, 334 ) '(time-averaged)'
786	ENDIF
787
788	IF ( do2d_at_begin ) THEN
789	begin_chr = 'and at the start'
790	ELSE
791	begin_chr = ''
792	ENDIF
793
794	output_format = ''
795	IF ( netcdf_output ) THEN
796	IF ( netcdf_data_format == 1 ) THEN
797	output_format = 'NetCDF classic'
798	ELSEIF ( netcdf_data_format == 2 ) THEN
799	output_format = 'NetCDF 64bit offset'
800	ELSEIF ( netcdf_data_format == 3 ) THEN
801	output_format = 'NetCDF4/HDF5'
802	ELSEIF ( netcdf_data_format == 4 ) THEN
803	output_format = 'NetCDF4/HDF5 clasic'
804	ENDIF
805	ENDIF
806	IF ( iso2d_output ) THEN
807	IF ( netcdf_output ) THEN
808	output_format = TRIM( output_format ) // ' and iso2d'
809	ELSE
810	output_format = 'iso2d'
811	ENDIF
812	ENDIF
813	WRITE ( io, 344 ) output_format
814
815	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
816	i = 1
817	slices = '/'
818	coordinates = '/'
819	!
820	!-- Building strings with index and coordinate informations of the
821	!-- slices
822	DO WHILE ( section(i,1) /= -9999 )
823
824	WRITE (section_chr,'(I5)') section(i,1)
825	section_chr = ADJUSTL( section_chr )
826	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
827
828	IF ( section(i,1) == -1 ) THEN
829	WRITE (coor_chr,'(F10.1)') -1.0
830	ELSE
831	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
832	ENDIF
833	coor_chr = ADJUSTL( coor_chr )
834	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
835
836	i = i + 1
837	ENDDO
838	IF ( av == 0 ) THEN
839	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
840	TRIM( begin_chr ), 'k', TRIM( slices ), &
841	TRIM( coordinates )
842	IF ( skip_time_do2d_xy /= 0.0 ) THEN
843	WRITE ( io, 339 ) skip_time_do2d_xy
844	ENDIF
845	ELSE
846	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
847	TRIM( begin_chr ), averaging_interval, &
848	dt_averaging_input, 'k', TRIM( slices ), &
849	TRIM( coordinates )
850	IF ( skip_time_data_output_av /= 0.0 ) THEN
851	WRITE ( io, 339 ) skip_time_data_output_av
852	ENDIF
853	ENDIF
854
855	ENDIF
856
857	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
858	i = 1
859	slices = '/'
860	coordinates = '/'
861	!
862	!-- Building strings with index and coordinate informations of the
863	!-- slices
864	DO WHILE ( section(i,2) /= -9999 )
865
866	WRITE (section_chr,'(I5)') section(i,2)
867	section_chr = ADJUSTL( section_chr )
868	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
869
870	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
871	coor_chr = ADJUSTL( coor_chr )
872	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
873
874	i = i + 1
875	ENDDO
876	IF ( av == 0 ) THEN
877	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
878	TRIM( begin_chr ), 'j', TRIM( slices ), &
879	TRIM( coordinates )
880	IF ( skip_time_do2d_xz /= 0.0 ) THEN
881	WRITE ( io, 339 ) skip_time_do2d_xz
882	ENDIF
883	ELSE
884	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
885	TRIM( begin_chr ), averaging_interval, &
886	dt_averaging_input, 'j', TRIM( slices ), &
887	TRIM( coordinates )
888	IF ( skip_time_data_output_av /= 0.0 ) THEN
889	WRITE ( io, 339 ) skip_time_data_output_av
890	ENDIF
891	ENDIF
892	ENDIF
893
894	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
895	i = 1
896	slices = '/'
897	coordinates = '/'
898	!
899	!-- Building strings with index and coordinate informations of the
900	!-- slices
901	DO WHILE ( section(i,3) /= -9999 )
902
903	WRITE (section_chr,'(I5)') section(i,3)
904	section_chr = ADJUSTL( section_chr )
905	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
906
907	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
908	coor_chr = ADJUSTL( coor_chr )
909	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
910
911	i = i + 1
912	ENDDO
913	IF ( av == 0 ) THEN
914	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
915	TRIM( begin_chr ), 'i', TRIM( slices ), &
916	TRIM( coordinates )
917	IF ( skip_time_do2d_yz /= 0.0 ) THEN
918	WRITE ( io, 339 ) skip_time_do2d_yz
919	ENDIF
920	ELSE
921	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
922	TRIM( begin_chr ), averaging_interval, &
923	dt_averaging_input, 'i', TRIM( slices ), &
924	TRIM( coordinates )
925	IF ( skip_time_data_output_av /= 0.0 ) THEN
926	WRITE ( io, 339 ) skip_time_data_output_av
927	ENDIF
928	ENDIF
929	ENDIF
930
931	ENDIF
932
933	ENDDO
934
935	!
936	!-- 3d-arrays
937	DO av = 0, 1
938
939	i = 1
940	do3d_chr = ''
941	DO WHILE ( do3d(av,i) /= ' ' )
942
943	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
944	i = i + 1
945
946	ENDDO
947
948	IF ( do3d_chr /= '' ) THEN
949	IF ( av == 0 ) THEN
950	WRITE ( io, 336 ) ''
951	ELSE
952	WRITE ( io, 336 ) '(time-averaged)'
953	ENDIF
954
955	output_format = ''
956	IF ( netcdf_output ) THEN
957	IF ( netcdf_data_format == 1 ) THEN
958	output_format = 'NetCDF classic'
959	ELSEIF ( netcdf_data_format == 2 ) THEN
960	output_format = 'NetCDF 64bit offset'
961	ELSEIF ( netcdf_data_format == 3 ) THEN
962	output_format = 'NetCDF4/HDF5'
963	ELSEIF ( netcdf_data_format == 4 ) THEN
964	output_format = 'NetCDF4/HDF5 clasic'
965	ENDIF
966	ENDIF
967	IF ( avs_output ) THEN
968	IF ( netcdf_output ) THEN
969	output_format = TRIM( output_format ) // ' and avs'
970	ELSE
971	output_format = 'avs'
972	ENDIF
973	ENDIF
974	WRITE ( io, 344 ) output_format
975
976	IF ( do3d_at_begin ) THEN
977	begin_chr = 'and at the start'
978	ELSE
979	begin_chr = ''
980	ENDIF
981	IF ( av == 0 ) THEN
982	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
983	zu(nz_do3d), nz_do3d
984	ELSE
985	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
986	TRIM( begin_chr ), averaging_interval, &
987	dt_averaging_input, zu(nz_do3d), nz_do3d
988	ENDIF
989
990	IF ( do3d_compress ) THEN
991	do3d_chr = ''
992	i = 1
993	DO WHILE ( do3d(av,i) /= ' ' )
994
995	SELECT CASE ( do3d(av,i) )
996	CASE ( 'u' )
997	j = 1
998	CASE ( 'v' )
999	j = 2
1000	CASE ( 'w' )
1001	j = 3
1002	CASE ( 'p' )
1003	j = 4
1004	CASE ( 'pt' )
1005	j = 5
1006	END SELECT
1007	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1008	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1009	':' // prec // ','
1010	i = i + 1
1011
1012	ENDDO
1013	WRITE ( io, 338 ) do3d_chr
1014
1015	ENDIF
1016
1017	IF ( av == 0 ) THEN
1018	IF ( skip_time_do3d /= 0.0 ) THEN
1019	WRITE ( io, 339 ) skip_time_do3d
1020	ENDIF
1021	ELSE
1022	IF ( skip_time_data_output_av /= 0.0 ) THEN
1023	WRITE ( io, 339 ) skip_time_data_output_av
1024	ENDIF
1025	ENDIF
1026
1027	ENDIF
1028
1029	ENDDO
1030
1031	!
1032	!-- masked arrays
1033	IF ( masks > 0 ) WRITE ( io, 345 ) &
1034	mask_scale_x, mask_scale_y, mask_scale_z
1035	DO mid = 1, masks
1036	DO av = 0, 1
1037
1038	i = 1
1039	domask_chr = ''
1040	DO WHILE ( domask(mid,av,i) /= ' ' )
1041	domask_chr = TRIM( domask_chr ) // ' ' // &
1042	TRIM( domask(mid,av,i) ) // ','
1043	i = i + 1
1044	ENDDO
1045
1046	IF ( domask_chr /= '' ) THEN
1047	IF ( av == 0 ) THEN
1048	WRITE ( io, 346 ) '', mid
1049	ELSE
1050	WRITE ( io, 346 ) ' (time-averaged)', mid
1051	ENDIF
1052
1053	output_format = ''
1054	IF ( netcdf_output ) THEN
1055	IF ( netcdf_data_format == 1 ) THEN
1056	output_format = 'NetCDF classic'
1057	ELSEIF ( netcdf_data_format == 2 ) THEN
1058	output_format = 'NetCDF 64bit offset'
1059	ELSEIF ( netcdf_data_format == 3 ) THEN
1060	output_format = 'NetCDF4/HDF5'
1061	ELSEIF ( netcdf_data_format == 4 ) THEN
1062	output_format = 'NetCDF4/HDF5 clasic'
1063	ENDIF
1064	ENDIF
1065	WRITE ( io, 344 ) output_format
1066
1067	IF ( av == 0 ) THEN
1068	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1069	ELSE
1070	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1071	averaging_interval, dt_averaging_input
1072	ENDIF
1073
1074	IF ( av == 0 ) THEN
1075	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1076	WRITE ( io, 339 ) skip_time_domask(mid)
1077	ENDIF
1078	ELSE
1079	IF ( skip_time_data_output_av /= 0.0 ) THEN
1080	WRITE ( io, 339 ) skip_time_data_output_av
1081	ENDIF
1082	ENDIF
1083	!
1084	!-- output locations
1085	DO dim = 1, 3
1086	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1087	count = 0
1088	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1089	count = count + 1
1090	ENDDO
1091	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1092	mask(mid,dim,:count)
1093	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1094	mask_loop(mid,dim,2) < 0.0 .AND. &
1095	mask_loop(mid,dim,3) == 0.0 ) THEN
1096	WRITE ( io, 350 ) dir(dim), dir(dim)
1097	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1098	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1099	mask_loop(mid,dim,1:2)
1100	ELSE
1101	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1102	mask_loop(mid,dim,1:3)
1103	ENDIF
1104	ENDDO
1105	ENDIF
1106
1107	ENDDO
1108	ENDDO
1109
1110	!
1111	!-- Timeseries
1112	IF ( dt_dots /= 9999999.9 ) THEN
1113	WRITE ( io, 340 )
1114
1115	output_format = ''
1116	IF ( netcdf_output ) THEN
1117	IF ( netcdf_data_format == 1 ) THEN
1118	output_format = 'NetCDF classic'
1119	ELSE
1120	output_format = 'NetCDF 64bit offset'
1121	ENDIF
1122	ENDIF
1123	IF ( profil_output ) THEN
1124	IF ( netcdf_output ) THEN
1125	output_format = TRIM( output_format ) // ' and profil'
1126	ELSE
1127	output_format = 'profil'
1128	ENDIF
1129	ENDIF
1130	WRITE ( io, 344 ) output_format
1131	WRITE ( io, 341 ) dt_dots
1132	ENDIF
1133
1134	#if defined( __dvrp_graphics )
1135	!
1136	!-- Dvrp-output
1137	IF ( dt_dvrp /= 9999999.9 ) THEN
1138	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1139	TRIM( dvrp_username ), TRIM( dvrp_directory )
1140	i = 1
1141	l = 0
1142	m = 0
1143	DO WHILE ( mode_dvrp(i) /= ' ' )
1144	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1145	READ ( mode_dvrp(i), '(10X,I2)' ) j
1146	l = l + 1
1147	IF ( do3d(0,j) /= ' ' ) THEN
1148	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1149	isosurface_color(:,l)
1150	ENDIF
1151	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1152	READ ( mode_dvrp(i), '(6X,I2)' ) j
1153	m = m + 1
1154	IF ( do2d(0,j) /= ' ' ) THEN
1155	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1156	slicer_range_limits_dvrp(:,m)
1157	ENDIF
1158	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1159	WRITE ( io, 363 ) dvrp_psize
1160	IF ( particle_dvrpsize /= 'none' ) THEN
1161	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1162	dvrpsize_interval
1163	ENDIF
1164	IF ( particle_color /= 'none' ) THEN
1165	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1166	color_interval
1167	ENDIF
1168	ENDIF
1169	i = i + 1
1170	ENDDO
1171
1172	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1173	superelevation_y, superelevation, clip_dvrp_l, &
1174	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1175
1176	IF ( TRIM( topography ) /= 'flat' ) THEN
1177	WRITE ( io, 366 ) topography_color
1178	IF ( cluster_size > 1 ) THEN
1179	WRITE ( io, 367 ) cluster_size
1180	ENDIF
1181	ENDIF
1182
1183	ENDIF
1184	#endif
1185
1186	#if defined( __spectra )
1187	!
1188	!-- Spectra output
1189	IF ( dt_dosp /= 9999999.9 ) THEN
1190	WRITE ( io, 370 )
1191
1192	output_format = ''
1193	IF ( netcdf_output ) THEN
1194	IF ( netcdf_data_format == 1 ) THEN
1195	output_format = 'NetCDF classic'
1196	ELSE
1197	output_format = 'NetCDF 64bit offset'
1198	ENDIF
1199	ENDIF
1200	IF ( profil_output ) THEN
1201	IF ( netcdf_output ) THEN
1202	output_format = TRIM( output_format ) // ' and profil'
1203	ELSE
1204	output_format = 'profil'
1205	ENDIF
1206	ENDIF
1207	WRITE ( io, 344 ) output_format
1208	WRITE ( io, 371 ) dt_dosp
1209	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1210	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1211	( spectra_direction(i), i = 1,10 ), &
1212	( comp_spectra_level(i), i = 1,100 ), &
1213	( plot_spectra_level(i), i = 1,100 ), &
1214	averaging_interval_sp, dt_averaging_input_pr
1215	ENDIF
1216	#endif
1217
1218	WRITE ( io, 99 )
1219
1220	!
1221	!-- Physical quantities
1222	WRITE ( io, 400 )
1223
1224	!
1225	!-- Geostrophic parameters
1226	WRITE ( io, 410 ) omega, phi, f, fs
1227
1228	!
1229	!-- Other quantities
1230	WRITE ( io, 411 ) g
1231	IF ( use_reference ) THEN
1232	IF ( ocean ) THEN
1233	WRITE ( io, 412 ) prho_reference
1234	ELSE
1235	WRITE ( io, 413 ) pt_reference
1236	ENDIF
1237	ENDIF
1238
1239	!
1240	!-- Cloud physics parameters
1241	IF ( cloud_physics ) THEN
1242	WRITE ( io, 415 )
1243	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1244	ENDIF
1245
1246	!-- Profile of the geostrophic wind (component ug)
1247	!-- Building output strings
1248	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1249	gradients = '------'
1250	slices = ' 0'
1251	coordinates = ' 0.0'
1252	i = 1
1253	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1254
1255	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1256	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1257
1258	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1259	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1260
1261	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1262	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1263
1264	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1265	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1266
1267	IF ( i == 10 ) THEN
1268	EXIT
1269	ELSE
1270	i = i + 1
1271	ENDIF
1272
1273	ENDDO
1274
1275	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1276	TRIM( gradients ), TRIM( slices )
1277
1278	!-- Profile of the geostrophic wind (component vg)
1279	!-- Building output strings
1280	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1281	gradients = '------'
1282	slices = ' 0'
1283	coordinates = ' 0.0'
1284	i = 1
1285	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1286
1287	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1288	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1289
1290	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1291	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1292
1293	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1294	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1295
1296	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1297	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1298
1299	IF ( i == 10 ) THEN
1300	EXIT
1301	ELSE
1302	i = i + 1
1303	ENDIF
1304
1305	ENDDO
1306
1307	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1308	TRIM( gradients ), TRIM( slices )
1309
1310	!
1311	!-- Initial temperature profile
1312	!-- Building output strings, starting with surface temperature
1313	WRITE ( temperatures, '(F6.2)' ) pt_surface
1314	gradients = '------'
1315	slices = ' 0'
1316	coordinates = ' 0.0'
1317	i = 1
1318	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1319
1320	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1321	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1322
1323	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1324	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1325
1326	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1327	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1328
1329	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1330	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1331
1332	IF ( i == 10 ) THEN
1333	EXIT
1334	ELSE
1335	i = i + 1
1336	ENDIF
1337
1338	ENDDO
1339
1340	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1341	TRIM( gradients ), TRIM( slices )
1342
1343	!
1344	!-- Initial humidity profile
1345	!-- Building output strings, starting with surface humidity
1346	IF ( humidity .OR. passive_scalar ) THEN
1347	WRITE ( temperatures, '(E8.1)' ) q_surface
1348	gradients = '--------'
1349	slices = ' 0'
1350	coordinates = ' 0.0'
1351	i = 1
1352	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1353
1354	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1355	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1356
1357	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1358	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1359
1360	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1361	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1362
1363	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1364	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1365
1366	IF ( i == 10 ) THEN
1367	EXIT
1368	ELSE
1369	i = i + 1
1370	ENDIF
1371
1372	ENDDO
1373
1374	IF ( humidity ) THEN
1375	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1376	TRIM( gradients ), TRIM( slices )
1377	ELSE
1378	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1379	TRIM( gradients ), TRIM( slices )
1380	ENDIF
1381	ENDIF
1382
1383	!
1384	!-- Initial salinity profile
1385	!-- Building output strings, starting with surface salinity
1386	IF ( ocean ) THEN
1387	WRITE ( temperatures, '(F6.2)' ) sa_surface
1388	gradients = '------'
1389	slices = ' 0'
1390	coordinates = ' 0.0'
1391	i = 1
1392	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1393
1394	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1395	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1396
1397	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1398	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1399
1400	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1401	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1402
1403	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1404	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1405
1406	IF ( i == 10 ) THEN
1407	EXIT
1408	ELSE
1409	i = i + 1
1410	ENDIF
1411
1412	ENDDO
1413
1414	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1415	TRIM( gradients ), TRIM( slices )
1416	ENDIF
1417
1418	!
1419	!-- Profile for the large scale vertial velocity
1420	!-- Building output strings, starting with surface value
1421	IF ( large_scale_subsidence ) THEN
1422	temperatures = ' 0.0'
1423	gradients = '------'
1424	slices = ' 0'
1425	coordinates = ' 0.0'
1426	i = 1
1427	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1428
1429	WRITE (coor_chr,'(E10.2,7X)') &
1430	w_subs(subs_vertical_gradient_level_i(i))
1431	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1432
1433	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1434	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1435
1436	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1437	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1438
1439	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1440	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1441
1442	IF ( i == 10 ) THEN
1443	EXIT
1444	ELSE
1445	i = i + 1
1446	ENDIF
1447
1448	ENDDO
1449
1450	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1451	TRIM( gradients ), TRIM( slices )
1452	ENDIF
1453
1454	!
1455	!-- LES / turbulence parameters
1456	WRITE ( io, 450 )
1457
1458	!--
1459	! ... LES-constants used must still be added here
1460	!--
1461	IF ( constant_diffusion ) THEN
1462	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1463	prandtl_number
1464	ENDIF
1465	IF ( .NOT. constant_diffusion) THEN
1466	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1467	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1468	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1469	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1470	ENDIF
1471
1472	!
1473	!-- Special actions during the run
1474	WRITE ( io, 470 )
1475	IF ( create_disturbances ) THEN
1476	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1477	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1478	zu(disturbance_level_ind_t), disturbance_level_ind_t
1479	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1480	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1481	ELSE
1482	WRITE ( io, 473 ) disturbance_energy_limit
1483	ENDIF
1484	WRITE ( io, 474 ) TRIM( random_generator )
1485	ENDIF
1486	IF ( pt_surface_initial_change /= 0.0 ) THEN
1487	WRITE ( io, 475 ) pt_surface_initial_change
1488	ENDIF
1489	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1490	WRITE ( io, 476 ) q_surface_initial_change
1491	ENDIF
1492	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1493	WRITE ( io, 477 ) q_surface_initial_change
1494	ENDIF
1495
1496	IF ( particle_advection ) THEN
1497	!
1498	!-- Particle attributes
1499	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1500	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1501	end_time_prel, dt_sort_particles
1502	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1503	IF ( random_start_position ) WRITE ( io, 481 )
1504	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1505	WRITE ( io, 495 ) total_number_of_particles
1506	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1507	WRITE ( io, 483 ) maximum_number_of_tailpoints
1508	IF ( minimum_tailpoint_distance /= 0 ) THEN
1509	WRITE ( io, 484 ) total_number_of_tails, &
1510	minimum_tailpoint_distance, &
1511	maximum_tailpoint_age
1512	ENDIF
1513	ENDIF
1514	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1515	WRITE ( io, 485 ) dt_write_particle_data
1516	output_format = ''
1517	IF ( netcdf_output ) THEN
1518	IF ( netcdf_data_format > 1 ) THEN
1519	output_format = 'netcdf (64 bit offset) and binary'
1520	ELSE
1521	output_format = 'netcdf and binary'
1522	ENDIF
1523	ELSE
1524	output_format = 'binary'
1525	ENDIF
1526	WRITE ( io, 344 ) output_format
1527	ENDIF
1528	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1529	IF ( write_particle_statistics ) WRITE ( io, 486 )
1530
1531	WRITE ( io, 487 ) number_of_particle_groups
1532
1533	DO i = 1, number_of_particle_groups
1534	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1535	WRITE ( io, 490 ) i, 0.0
1536	WRITE ( io, 492 )
1537	ELSE
1538	WRITE ( io, 490 ) i, radius(i)
1539	IF ( density_ratio(i) /= 0.0 ) THEN
1540	WRITE ( io, 491 ) density_ratio(i)
1541	ELSE
1542	WRITE ( io, 492 )
1543	ENDIF
1544	ENDIF
1545	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1546	pdx(i), pdy(i), pdz(i)
1547	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1548	ENDDO
1549
1550	ENDIF
1551
1552
1553	!
1554	!-- Parameters of 1D-model
1555	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1556	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1557	mixing_length_1d, dissipation_1d
1558	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1559	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1560	ENDIF
1561	ENDIF
1562
1563	!
1564	!-- User-defined informations
1565	CALL user_header( io )
1566
1567	WRITE ( io, 99 )
1568
1569	!
1570	!-- Write buffer contents to disc immediately
1571	CALL local_flush( io )
1572
1573	!
1574	!-- Here the FORMATs start
1575
1576	99 FORMAT (1X,78('-'))
1577	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1578	1X,'* ',A,' *',9X,A/ &
1579	1X,'***************************',9X,42('-'))
1580	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1581	37X,42('-'))
1582	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1583	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1584	' Run on host: ',A10)
1585	#if defined( __parallel )
1586	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1587	')',1X,A)
1588	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1589	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1590	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1591	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1592	37X,'because the job is running on an SMP-cluster')
1593	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1594	#endif
1595	110 FORMAT (/' Numerical Schemes:'/ &
1596	' -----------------'/)
1597	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1598	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1599	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1600	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1601	' or Upstream')
1602	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1603	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1604	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1605	' or Upstream')
1606	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1607	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1608	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1609	' Translation velocity = ',A/ &
1610	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1611	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1612	' of timestep changes)')
1613	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1614	' timestep changes')
1615	122 FORMAT (' --> Time differencing scheme: ',A)
1616	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1617	' maximum damping coefficient: ',F5.3, ' 1/s')
1618	124 FORMAT (' Spline-overshoots are being suppressed')
1619	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1620	' of'/ &
1621	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1622	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1623	' of'/ &
1624	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1625	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1626	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1627	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1628	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1629	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1630	130 FORMAT (' --> Additional prognostic equation for the total water content')
1631	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1632	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1633	' effective emissivity scheme')
1634	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1635	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1636	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1637	A,'-cycle)'/ &
1638	' number of grid levels: ',I2/ &
1639	' Gauss-Seidel red/black iterations: ',I2)
1640	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1641	I3,')')
1642	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1643	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1644	I3,')'/ &
1645	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1646	I3,')')
1647	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1648	139 FORMAT (' --> Loop optimization method: ',A)
1649	140 FORMAT (' maximum residual allowed: ',E10.3)
1650	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1651	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1652	'step')
1653	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1654	'kinetic energy')
1655	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1656	'conserved'/ &
1657	' using the ',A,' mode')
1658	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1659	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1660	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1661	/' starting from dp_level_b =', F8.3, 'm', A /)
1662	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1663	'prognostic equation for')
1664	154 FORMAT (' the potential temperature')
1665	200 FORMAT (//' Run time and time step information:'/ &
1666	' ----------------------------------'/)
1667	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1668	' CFL-factor: ',F4.2)
1669	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1670	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1671	' End time: ',F9.3,' s')
1672	204 FORMAT ( A,F9.3,' s')
1673	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1674	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1675	' CPU-time used: ',F9.3,' s per timestep: ', &
1676	' ',F9.3,' s'/ &
1677	' per second of simulated tim', &
1678	'e: ',F9.3,' s')
1679	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1680	250 FORMAT (//' Computational grid and domain size:'/ &
1681	' ----------------------------------'// &
1682	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1683	' m dz = ',F7.3,' m'/ &
1684	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1685	' m z(u) = ',F10.3,' m'/)
1686	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1687	' factor: ',F5.3/ &
1688	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1689	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1690	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1691	255 FORMAT (' Subdomains have equal size')
1692	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1693	'have smaller sizes'/ &
1694	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1695	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1696	' degrees')
1697	270 FORMAT (//' Topography informations:'/ &
1698	' -----------------------'// &
1699	1X,'Topography: ',A)
1700	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1701	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1702	' / ',I4)
1703	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1704	' direction' / &
1705	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1706	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1707	278 FORMAT (' Topography grid definition convention:'/ &
1708	' cell edge (staggered grid points'/ &
1709	' (u in x-direction, v in y-direction))' /)
1710	279 FORMAT (' Topography grid definition convention:'/ &
1711	' cell center (scalar grid points)' /)
1712	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1713	' ------------------------------'// &
1714	' Canopy mode: ', A / &
1715	' Canopy top: ',I4 / &
1716	' Leaf drag coefficient: ',F6.2 /)
1717	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1718	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1719	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1720	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1721	' Height: ',A,' m'/ &
1722	' Leaf area density: ',A,' m2/m3'/ &
1723	' Gradient: ',A,' m2/m4'/ &
1724	' Gridpoint: ',A)
1725
1726	300 FORMAT (//' Boundary conditions:'/ &
1727	' -------------------'// &
1728	' p uv ', &
1729	' pt'// &
1730	' B. bound.: ',A/ &
1731	' T. bound.: ',A)
1732	301 FORMAT (/' ',A// &
1733	' B. bound.: ',A/ &
1734	' T. bound.: ',A)
1735	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1736	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1737	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1738	'computational u,v-level:'// &
1739	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1740	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1741	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1742	307 FORMAT (' Heatflux has a random normal distribution')
1743	308 FORMAT (' Predefined surface temperature')
1744	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1745	310 FORMAT (//' 1D-Model:'// &
1746	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1747	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1748	312 FORMAT (' Predefined surface humidity')
1749	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1750	314 FORMAT (' Predefined scalar value at the surface')
1751	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1752	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1753	'atmosphere model')
1754	317 FORMAT (//' Lateral boundaries:'/ &
1755	' left/right: ',A/ &
1756	' north/south: ',A)
1757	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1758	'max =',F5.1,' m**2/s')
1759	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1760	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1761	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1762	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1763	' v: ',F9.6,' m2/s2')
1764	325 FORMAT (//' List output:'/ &
1765	' -----------'// &
1766	' 1D-Profiles:'/ &
1767	' Output every ',F8.2,' s')
1768	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1769	' Averaging input every ',F8.2,' s')
1770	330 FORMAT (//' Data output:'/ &
1771	' -----------'/)
1772	331 FORMAT (/' 1D-Profiles:')
1773	332 FORMAT (/' ',A)
1774	333 FORMAT (' Output every ',F8.2,' s',/ &
1775	' Time averaged over ',F8.2,' s'/ &
1776	' Averaging input every ',F8.2,' s')
1777	334 FORMAT (/' 2D-Arrays',A,':')
1778	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1779	' Output every ',F8.2,' s ',A/ &
1780	' Cross sections at ',A1,' = ',A/ &
1781	' scalar-coordinates: ',A,' m'/)
1782	336 FORMAT (/' 3D-Arrays',A,':')
1783	337 FORMAT (/' Arrays: ',A/ &
1784	' Output every ',F8.2,' s ',A/ &
1785	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1786	338 FORMAT (' Compressed data output'/ &
1787	' Decimal precision: ',A/)
1788	339 FORMAT (' No output during initial ',F8.2,' s')
1789	340 FORMAT (/' Time series:')
1790	341 FORMAT (' Output every ',F8.2,' s'/)
1791	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1792	' Output every ',F8.2,' s ',A/ &
1793	' Time averaged over ',F8.2,' s'/ &
1794	' Averaging input every ',F8.2,' s'/ &
1795	' Cross sections at ',A1,' = ',A/ &
1796	' scalar-coordinates: ',A,' m'/)
1797	343 FORMAT (/' Arrays: ',A/ &
1798	' Output every ',F8.2,' s ',A/ &
1799	' Time averaged over ',F8.2,' s'/ &
1800	' Averaging input every ',F8.2,' s'/ &
1801	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1802	344 FORMAT (' Output format: ',A/)
1803	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1804	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1805	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1806	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1807	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1808	347 FORMAT (' Variables: ',A/ &
1809	' Output every ',F8.2,' s')
1810	348 FORMAT (' Variables: ',A/ &
1811	' Output every ',F8.2,' s'/ &
1812	' Time averaged over ',F8.2,' s'/ &
1813	' Averaging input every ',F8.2,' s')
1814	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1815	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1816	13(' ',8(F8.2,',')/) )
1817	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1818	'all gridpoints along ',A,'-direction (default).' )
1819	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1820	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1821	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1822	#if defined( __dvrp_graphics )
1823	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1824	' Output every ',F7.1,' s'/ &
1825	' Output mode: ',A/ &
1826	' Host / User: ',A,' / ',A/ &
1827	' Directory: ',A// &
1828	' The sequence contains:')
1829	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1830	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1831	362 FORMAT (/' Slicer plane ',A/ &
1832	' Slicer limits: [',F6.2,',',F6.2,']')
1833	363 FORMAT (/' Particles'/ &
1834	' particle size: ',F7.2,' m')
1835	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1836	F6.2,',',F6.2,']')
1837	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1838	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1839	')'/ &
1840	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1841	' from y = ',F9.1,' m to y = ',F9.1,' m')
1842	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1843	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1844	#endif
1845	#if defined( __spectra )
1846	370 FORMAT (' Spectra:')
1847	371 FORMAT (' Output every ',F7.1,' s'/)
1848	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1849	' Directions: ', 10(A5,',')/ &
1850	' height levels k = ', 20(I3,',')/ &
1851	' ', 20(I3,',')/ &
1852	' ', 20(I3,',')/ &
1853	' ', 20(I3,',')/ &
1854	' ', 19(I3,','),I3,'.'/ &
1855	' height levels selected for standard plot:'/ &
1856	' k = ', 20(I3,',')/ &
1857	' ', 20(I3,',')/ &
1858	' ', 20(I3,',')/ &
1859	' ', 20(I3,',')/ &
1860	' ', 19(I3,','),I3,'.'/ &
1861	' Time averaged over ', F7.1, ' s,' / &
1862	' Profiles for the time averaging are taken every ', &
1863	F6.1,' s')
1864	#endif
1865	400 FORMAT (//' Physical quantities:'/ &
1866	' -------------------'/)
1867	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1868	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1869	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1870	' f* = ',F9.6,' 1/s')
1871	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1872	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1873	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1874	415 FORMAT (/' Cloud physics parameters:'/ &
1875	' ------------------------'/)
1876	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1877	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1878	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1879	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1880	' Vapourization heat : L_v = ',E8.2,' J/kg')
1881	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1882	' Height: ',A,' m'/ &
1883	' Temperature: ',A,' K'/ &
1884	' Gradient: ',A,' K/100m'/ &
1885	' Gridpoint: ',A)
1886	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1887	' Height: ',A,' m'/ &
1888	' Humidity: ',A,' kg/kg'/ &
1889	' Gradient: ',A,' (kg/kg)/100m'/ &
1890	' Gridpoint: ',A)
1891	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1892	' Height: ',A,' m'/ &
1893	' Scalar concentration: ',A,' kg/m**3'/ &
1894	' Gradient: ',A,' (kg/m**3)/100m'/ &
1895	' Gridpoint: ',A)
1896	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1897	' Height: ',A,' m'/ &
1898	' ug: ',A,' m/s'/ &
1899	' Gradient: ',A,' 1/100s'/ &
1900	' Gridpoint: ',A)
1901	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1902	' Height: ',A,' m'/ &
1903	' vg: ',A,' m/s'/ &
1904	' Gradient: ',A,' 1/100s'/ &
1905	' Gridpoint: ',A)
1906	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1907	' Height: ',A,' m'/ &
1908	' Salinity: ',A,' psu'/ &
1909	' Gradient: ',A,' psu/100m'/ &
1910	' Gridpoint: ',A)
1911	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1912	' Height: ',A,' m'/ &
1913	' w_subs: ',A,' m/s'/ &
1914	' Gradient: ',A,' (m/s)/100m'/ &
1915	' Gridpoint: ',A)
1916	450 FORMAT (//' LES / Turbulence quantities:'/ &
1917	' ---------------------------'/)
1918	451 FORMAT (' Diffusion coefficients are constant:'/ &
1919	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1920	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1921	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1922	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1923	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1924	470 FORMAT (//' Actions during the simulation:'/ &
1925	' -----------------------------'/)
1926	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1927	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1928	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1929	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1930	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1931	' to i/j =',I4)
1932	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1933	1X,F5.3, ' m2/s2')
1934	474 FORMAT (' Random number generator used : ',A/)
1935	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1936	'respectively, if'/ &
1937	' the value is negative) by ',F5.2,' K at the beginning of the',&
1938	' 3D-simulation'/)
1939	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1940	'respectively, if the'/ &
1941	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1942	' the 3D-simulation'/)
1943	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1944	'respectively, if the'/ &
1945	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1946	' the 3D-simulation'/)
1947	480 FORMAT (' Particles:'/ &
1948	' ---------'// &
1949	' Particle advection is active (switched on at t = ', F7.1, &
1950	' s)'/ &
1951	' Start of new particle generations every ',F6.1,' s'/ &
1952	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1953	' bottom: ', A, ' top: ', A/&
1954	' Maximum particle age: ',F9.1,' s'/ &
1955	' Advection stopped at t = ',F9.1,' s'/ &
1956	' Particles are sorted every ',F9.1,' s'/)
1957	481 FORMAT (' Particles have random start positions'/)
1958	482 FORMAT (' Particles are advected only horizontally'/)
1959	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1960	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1961	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1962	' Maximum age of the end of the tail: ',F8.2,' s')
1963	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1964	486 FORMAT (' Particle statistics are written on file'/)
1965	487 FORMAT (' Number of particle groups: ',I2/)
1966	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1967	' minimum timestep for advection: ', F7.5/)
1968	489 FORMAT (' Number of particles simultaneously released at each ', &
1969	'point: ', I5/)
1970	490 FORMAT (' Particle group ',I2,':'/ &
1971	' Particle radius: ',E10.3, 'm')
1972	491 FORMAT (' Particle inertia is activated'/ &
1973	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1974	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1975	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1976	' y:',F8.1,' - ',F8.1,' m'/&
1977	' z:',F8.1,' - ',F8.1,' m'/&
1978	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1979	' m dz = ',F8.1,' m'/)
1980	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1981	F8.2,' s'/)
1982	495 FORMAT (' Number of particles in total domain: ',I10/)
1983	500 FORMAT (//' 1D-Model parameters:'/ &
1984	' -------------------'// &
1985	' Simulation time: ',F8.1,' s'/ &
1986	' Run-controll output every: ',F8.1,' s'/ &
1987	' Vertical profile output every: ',F8.1,' s'/ &
1988	' Mixing length calculation: ',A/ &
1989	' Dissipation calculation: ',A/)
1990	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1991	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
1992	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
1993
1994
1995	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |