Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 626

Last change on this file since 626 was 581, checked in by heinze, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 76.5 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 581 2010-10-05 14:22:12Z suehring $
11	!
12	! 580 2010-10-05 13:59:11Z heinze
13	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
14	! ws_vertical_gradient_level to subs_vertical_gradient_level and
15	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
16	!
17	! 493 2010-03-01 08:30:24Z raasch
18	! NetCDF data output format extendend for NetCDF4/HDF5
19	!
20	! 449 2010-02-02 11:23:59Z raasch
21	! +large scale vertical motion (subsidence/ascent)
22	! Bugfix: index problem concerning gradient_level indices removed
23	!
24	! 410 2009-12-04 17:05:40Z letzel
25	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
26	! mask_scale\|_x\|y\|z, masks, skip_time_domask
27	!
28	! 346 2009-07-06 10:13:41Z raasch
29	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
30	! Coupling with independent precursor runs.
31	! Output of messages replaced by message handling routine.
32	! Output of several additional dvr parameters
33	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
34	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
35	! dp_smooth, dpdxy, u_bulk, v_bulk
36	! topography_grid_convention moved from user_header
37	! small bugfix concerning 3d 64bit netcdf output format
38	!
39	! 206 2008-10-13 14:59:11Z raasch
40	! Bugfix: error in zu index in case of section_xy = -1
41	!
42	! 198 2008-09-17 08:55:28Z raasch
43	! Format adjustments allowing output of larger revision numbers
44	!
45	! 197 2008-09-16 15:29:03Z raasch
46	! allow 100 spectra levels instead of 10 for consistency with
47	! define_netcdf_header,
48	! bugfix in the output of the characteristic levels of potential temperature,
49	! geostrophic wind, scalar concentration, humidity and leaf area density,
50	! output of turbulence recycling informations
51	!
52	! 138 2007-11-28 10:03:58Z letzel
53	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
54	! Allow two instead of one digit to specify isosurface and slicer variables.
55	! Output of sorting frequency of particles
56	!
57	! 108 2007-08-24 15:10:38Z letzel
58	! Output of informations for coupled model runs (boundary conditions etc.)
59	! + output of momentumfluxes at the top boundary
60	! Rayleigh damping for ocean, e_init
61	!
62	! 97 2007-06-21 08:23:15Z raasch
63	! Adjustments for the ocean version.
64	! use_pt_reference renamed use_reference
65	!
66	! 87 2007-05-22 15:46:47Z raasch
67	! Bugfix: output of use_upstream_for_tke
68	!
69	! 82 2007-04-16 15:40:52Z raasch
70	! Preprocessor strings for different linux clusters changed to "lc",
71	! routine local_flush is used for buffer flushing
72	!
73	! 76 2007-03-29 00:58:32Z raasch
74	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
75	! output of the loop optimization method, moisture renamed humidity,
76	! output of subversion revision number
77	!
78	! 19 2007-02-23 04:53:48Z raasch
79	! Output of scalar flux applied at top boundary
80	!
81	! RCS Log replace by Id keyword, revision history cleaned up
82	!
83	! Revision 1.63 2006/08/22 13:53:13 raasch
84	! Output of dz_max
85	!
86	! Revision 1.1 1997/08/11 06:17:20 raasch
87	! Initial revision
88	!
89	!
90	! Description:
91	! ------------
92	! Writing a header with all important informations about the actual run.
93	! This subroutine is called three times, two times at the beginning
94	! (writing information on files RUN_CONTROL and HEADER) and one time at the
95	! end of the run, then writing additional information about CPU-usage on file
96	! header.
97	!-----------------------------------------------------------------------------!
98
99	USE arrays_3d
100	USE control_parameters
101	USE cloud_parameters
102	USE cpulog
103	USE dvrp_variables
104	USE grid_variables
105	USE indices
106	USE model_1d
107	USE particle_attributes
108	USE pegrid
109	USE subsidence_mod
110	USE spectrum
111
112	IMPLICIT NONE
113
114	CHARACTER (LEN=1) :: prec
115	CHARACTER (LEN=2) :: do2d_mode
116	CHARACTER (LEN=5) :: section_chr
117	CHARACTER (LEN=9) :: time_to_string
118	CHARACTER (LEN=10) :: coor_chr, host_chr
119	CHARACTER (LEN=16) :: begin_chr
120	CHARACTER (LEN=23) :: ver_rev
121	CHARACTER (LEN=40) :: output_format
122	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
123	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
124	domask_chr, run_classification
125	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
126	temperatures, ugcomponent, vgcomponent
127	CHARACTER (LEN=85) :: roben, runten
128
129	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
130
131	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
132	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
133	REAL :: cpuseconds_per_simulated_second
134
135	!
136	!-- Open the output file. At the end of the simulation, output is directed
137	!-- to unit 19.
138	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
139	.NOT. simulated_time_at_begin /= simulated_time ) THEN
140	io = 15 ! header output on file RUN_CONTROL
141	ELSE
142	io = 19 ! header output on file HEADER
143	ENDIF
144	CALL check_open( io )
145
146	!
147	!-- At the end of the run, output file (HEADER) will be rewritten with
148	!-- new informations
149	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
150
151	!
152	!-- Determine kind of model run
153	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
154	run_classification = '3D - restart run'
155	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
156	run_classification = '3D - run with cyclic fill of 3D - prerun data'
157	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
158	run_classification = '3D - run without 1D - prerun'
159	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
160	run_classification = '3D - run with 1D - prerun'
161	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
162	run_classification = '3D - run initialized by user'
163	ELSE
164	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
165	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
166	ENDIF
167	IF ( ocean ) THEN
168	run_classification = 'ocean - ' // run_classification
169	ELSE
170	run_classification = 'atmosphere - ' // run_classification
171	ENDIF
172
173	!
174	!-- Run-identification, date, time, host
175	host_chr = host(1:10)
176	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
177	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
178	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
179	#if defined( __mpi2 )
180	mpi_type = 2
181	#else
182	mpi_type = 1
183	#endif
184	WRITE ( io, 101 ) mpi_type, coupling_mode
185	ENDIF
186	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
187	ADJUSTR( host_chr )
188	#if defined( __parallel )
189	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
190	char1 = 'calculated'
191	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
192	host(1:2) == 'lc' ) .AND. &
193	npex == -1 .AND. pdims(2) == 1 ) THEN
194	char1 = 'forced'
195	ELSE
196	char1 = 'predefined'
197	ENDIF
198	IF ( threads_per_task == 1 ) THEN
199	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
200	ELSE
201	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
202	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
203	ENDIF
204	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
205	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
206	npex == -1 .AND. pdims(2) == 1 ) &
207	THEN
208	WRITE ( io, 106 )
209	ELSEIF ( pdims(2) == 1 ) THEN
210	WRITE ( io, 107 ) 'x'
211	ELSEIF ( pdims(1) == 1 ) THEN
212	WRITE ( io, 107 ) 'y'
213	ENDIF
214	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
215	#endif
216	WRITE ( io, 99 )
217
218	!
219	!-- Numerical schemes
220	WRITE ( io, 110 )
221	IF ( psolver(1:7) == 'poisfft' ) THEN
222	WRITE ( io, 111 ) TRIM( fft_method )
223	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
224	ELSEIF ( psolver == 'sor' ) THEN
225	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
226	ELSEIF ( psolver == 'multigrid' ) THEN
227	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
228	IF ( mg_cycles == -1 ) THEN
229	WRITE ( io, 140 ) residual_limit
230	ELSE
231	WRITE ( io, 141 ) mg_cycles
232	ENDIF
233	IF ( mg_switch_to_pe0_level == 0 ) THEN
234	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
235	nzt_mg(1)
236	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
237	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
238	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
239	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
240	nzt_mg(mg_switch_to_pe0_level), &
241	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
242	nzt_mg(1)
243	ENDIF
244	ENDIF
245	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
246	THEN
247	WRITE ( io, 142 )
248	ENDIF
249
250	IF ( momentum_advec == 'pw-scheme' ) THEN
251	WRITE ( io, 113 )
252	ELSE
253	WRITE ( io, 114 )
254	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
255	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
256	overshoot_limit_w /= 0.0 ) THEN
257	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
258	overshoot_limit_w
259	ENDIF
260	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
261	ups_limit_w /= 0.0 ) &
262	THEN
263	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
264	ENDIF
265	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
266	ENDIF
267	IF ( scalar_advec == 'pw-scheme' ) THEN
268	WRITE ( io, 116 )
269	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
270	WRITE ( io, 117 )
271	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
272	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
273	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
274	ENDIF
275	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
276	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
277	ENDIF
278	ELSE
279	WRITE ( io, 118 )
280	ENDIF
281
282	WRITE ( io, 139 ) TRIM( loop_optimization )
283
284	IF ( galilei_transformation ) THEN
285	IF ( use_ug_for_galilei_tr ) THEN
286	char1 = 'geostrophic wind'
287	ELSE
288	char1 = 'mean wind in model domain'
289	ENDIF
290	IF ( simulated_time_at_begin == simulated_time ) THEN
291	char2 = 'at the start of the run'
292	ELSE
293	char2 = 'at the end of the run'
294	ENDIF
295	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
296	advected_distance_x/1000.0, advected_distance_y/1000.0
297	ENDIF
298	IF ( timestep_scheme == 'leapfrog' ) THEN
299	WRITE ( io, 120 )
300	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
301	WRITE ( io, 121 )
302	ELSE
303	WRITE ( io, 122 ) timestep_scheme
304	ENDIF
305	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
306	IF ( rayleigh_damping_factor /= 0.0 ) THEN
307	IF ( .NOT. ocean ) THEN
308	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
309	rayleigh_damping_factor
310	ELSE
311	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
312	rayleigh_damping_factor
313	ENDIF
314	ENDIF
315	IF ( humidity ) THEN
316	IF ( .NOT. cloud_physics ) THEN
317	WRITE ( io, 129 )
318	ELSE
319	WRITE ( io, 130 )
320	WRITE ( io, 131 )
321	IF ( radiation ) WRITE ( io, 132 )
322	IF ( precipitation ) WRITE ( io, 133 )
323	ENDIF
324	ENDIF
325	IF ( passive_scalar ) WRITE ( io, 134 )
326	IF ( conserve_volume_flow ) THEN
327	WRITE ( io, 150 ) conserve_volume_flow_mode
328	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
329	WRITE ( io, 151 ) u_bulk, v_bulk
330	ENDIF
331	ELSEIF ( dp_external ) THEN
332	IF ( dp_smooth ) THEN
333	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
334	ELSE
335	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
336	ENDIF
337	ENDIF
338	IF ( large_scale_subsidence ) THEN
339	WRITE ( io, 153 )
340	WRITE ( io, 154 )
341	ENDIF
342	WRITE ( io, 99 )
343
344	!
345	!-- Runtime and timestep informations
346	WRITE ( io, 200 )
347	IF ( .NOT. dt_fixed ) THEN
348	WRITE ( io, 201 ) dt_max, cfl_factor
349	ELSE
350	WRITE ( io, 202 ) dt
351	ENDIF
352	WRITE ( io, 203 ) simulated_time_at_begin, end_time
353
354	IF ( time_restart /= 9999999.9 .AND. &
355	simulated_time_at_begin == simulated_time ) THEN
356	IF ( dt_restart == 9999999.9 ) THEN
357	WRITE ( io, 204 ) ' Restart at: ',time_restart
358	ELSE
359	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
360	ENDIF
361	ENDIF
362
363	IF ( simulated_time_at_begin /= simulated_time ) THEN
364	i = MAX ( log_point_s(10)%counts, 1 )
365	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
366	cpuseconds_per_simulated_second = 0.0
367	ELSE
368	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
369	( simulated_time - &
370	simulated_time_at_begin )
371	ENDIF
372	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
373	log_point_s(10)%sum / REAL( i ), &
374	cpuseconds_per_simulated_second
375	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
376	IF ( dt_restart == 9999999.9 ) THEN
377	WRITE ( io, 204 ) ' Next restart at: ',time_restart
378	ELSE
379	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
380	ENDIF
381	ENDIF
382	ENDIF
383
384	!
385	!-- Start time for coupled runs, if independent precursor runs for atmosphere
386	!-- and ocean are used. In this case, coupling_start_time defines the time
387	!-- when the coupling is switched on.
388	IF ( coupling_start_time /= 0.0 ) THEN
389	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
390	char1 = 'Precursor run for a coupled atmosphere-ocean run'
391	ELSE
392	char1 = 'Coupled atmosphere-ocean run following independent ' // &
393	'precursor runs'
394	ENDIF
395	WRITE ( io, 207 ) char1, coupling_start_time
396	ENDIF
397
398	!
399	!-- Computational grid
400	IF ( .NOT. ocean ) THEN
401	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
402	IF ( dz_stretch_level_index < nzt+1 ) THEN
403	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
404	dz_stretch_factor, dz_max
405	ENDIF
406	ELSE
407	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
408	IF ( dz_stretch_level_index > 0 ) THEN
409	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
410	dz_stretch_factor, dz_max
411	ENDIF
412	ENDIF
413	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
414	MIN( nnz+2, nzt+2 )
415	IF ( numprocs > 1 ) THEN
416	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
417	WRITE ( io, 255 )
418	ELSE
419	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
420	ENDIF
421	ENDIF
422	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
423
424	!
425	!-- Topography
426	WRITE ( io, 270 ) topography
427	SELECT CASE ( TRIM( topography ) )
428
429	CASE ( 'flat' )
430	! no actions necessary
431
432	CASE ( 'single_building' )
433	blx = INT( building_length_x / dx )
434	bly = INT( building_length_y / dy )
435	bh = INT( building_height / dz )
436
437	IF ( building_wall_left == 9999999.9 ) THEN
438	building_wall_left = ( nx + 1 - blx ) / 2 * dx
439	ENDIF
440	bxl = INT ( building_wall_left / dx + 0.5 )
441	bxr = bxl + blx
442
443	IF ( building_wall_south == 9999999.9 ) THEN
444	building_wall_south = ( ny + 1 - bly ) / 2 * dy
445	ENDIF
446	bys = INT ( building_wall_south / dy + 0.5 )
447	byn = bys + bly
448
449	WRITE ( io, 271 ) building_length_x, building_length_y, &
450	building_height, bxl, bxr, bys, byn
451
452	CASE ( 'single_street_canyon' )
453	ch = NINT( canyon_height / dz )
454	IF ( canyon_width_x /= 9999999.9 ) THEN
455	!
456	!-- Street canyon in y direction
457	cwx = NINT( canyon_width_x / dx )
458	IF ( canyon_wall_left == 9999999.9 ) THEN
459	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
460	ENDIF
461	cxl = NINT( canyon_wall_left / dx )
462	cxr = cxl + cwx
463	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
464
465	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
466	!
467	!-- Street canyon in x direction
468	cwy = NINT( canyon_width_y / dy )
469	IF ( canyon_wall_south == 9999999.9 ) THEN
470	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
471	ENDIF
472	cys = NINT( canyon_wall_south / dy )
473	cyn = cys + cwy
474	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
475	ENDIF
476
477	END SELECT
478
479	IF ( TRIM( topography ) /= 'flat' ) THEN
480	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
481	IF ( TRIM( topography ) == 'single_building' .OR. &
482	TRIM( topography ) == 'single_street_canyon' ) THEN
483	WRITE ( io, 278 )
484	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
485	WRITE ( io, 279 )
486	ENDIF
487	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
488	WRITE ( io, 278 )
489	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
490	WRITE ( io, 279 )
491	ENDIF
492	ENDIF
493
494	IF ( plant_canopy ) THEN
495
496	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
497	IF ( passive_scalar ) THEN
498	WRITE ( io, 281 ) scalar_exchange_coefficient, &
499	leaf_surface_concentration
500	ENDIF
501
502	!
503	!-- Heat flux at the top of vegetation
504	WRITE ( io, 282 ) cthf
505
506	!
507	!-- Leaf area density profile
508	!-- Building output strings, starting with surface value
509	WRITE ( learde, '(F6.2)' ) lad_surface
510	gradients = '------'
511	slices = ' 0'
512	coordinates = ' 0.0'
513	i = 1
514	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
515
516	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
517	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
518
519	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
520	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
521
522	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
523	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
524
525	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
526	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
527
528	i = i + 1
529	ENDDO
530
531	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
532	TRIM( gradients ), TRIM( slices )
533
534	ENDIF
535
536	!
537	!-- Boundary conditions
538	IF ( ibc_p_b == 0 ) THEN
539	runten = 'p(0) = 0 \|'
540	ELSEIF ( ibc_p_b == 1 ) THEN
541	runten = 'p(0) = p(1) \|'
542	ELSE
543	runten = 'p(0) = p(1) +R\|'
544	ENDIF
545	IF ( ibc_p_t == 0 ) THEN
546	roben = 'p(nzt+1) = 0 \|'
547	ELSE
548	roben = 'p(nzt+1) = p(nzt) \|'
549	ENDIF
550
551	IF ( ibc_uv_b == 0 ) THEN
552	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
553	ELSE
554	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
555	ENDIF
556	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
557	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
558	ELSEIF ( ibc_uv_t == 0 ) THEN
559	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
560	ELSE
561	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
562	ENDIF
563
564	IF ( ibc_pt_b == 0 ) THEN
565	runten = TRIM( runten ) // ' pt(0) = pt_surface'
566	ELSEIF ( ibc_pt_b == 1 ) THEN
567	runten = TRIM( runten ) // ' pt(0) = pt(1)'
568	ELSEIF ( ibc_pt_b == 2 ) THEN
569	runten = TRIM( runten ) // ' pt(0) = from coupled model'
570	ENDIF
571	IF ( ibc_pt_t == 0 ) THEN
572	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
573	ELSEIF( ibc_pt_t == 1 ) THEN
574	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
575	ELSEIF( ibc_pt_t == 2 ) THEN
576	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
577	ENDIF
578
579	WRITE ( io, 300 ) runten, roben
580
581	IF ( .NOT. constant_diffusion ) THEN
582	IF ( ibc_e_b == 1 ) THEN
583	runten = 'e(0) = e(1)'
584	ELSE
585	runten = 'e(0) = e(1) = (u/0.1)*2'
586	ENDIF
587	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
588
589	WRITE ( io, 301 ) 'e', runten, roben
590
591	ENDIF
592
593	IF ( ocean ) THEN
594	runten = 'sa(0) = sa(1)'
595	IF ( ibc_sa_t == 0 ) THEN
596	roben = 'sa(nzt+1) = sa_surface'
597	ELSE
598	roben = 'sa(nzt+1) = sa(nzt)'
599	ENDIF
600	WRITE ( io, 301 ) 'sa', runten, roben
601	ENDIF
602
603	IF ( humidity ) THEN
604	IF ( ibc_q_b == 0 ) THEN
605	runten = 'q(0) = q_surface'
606	ELSE
607	runten = 'q(0) = q(1)'
608	ENDIF
609	IF ( ibc_q_t == 0 ) THEN
610	roben = 'q(nzt) = q_top'
611	ELSE
612	roben = 'q(nzt) = q(nzt-1) + dq/dz'
613	ENDIF
614	WRITE ( io, 301 ) 'q', runten, roben
615	ENDIF
616
617	IF ( passive_scalar ) THEN
618	IF ( ibc_q_b == 0 ) THEN
619	runten = 's(0) = s_surface'
620	ELSE
621	runten = 's(0) = s(1)'
622	ENDIF
623	IF ( ibc_q_t == 0 ) THEN
624	roben = 's(nzt) = s_top'
625	ELSE
626	roben = 's(nzt) = s(nzt-1) + ds/dz'
627	ENDIF
628	WRITE ( io, 301 ) 's', runten, roben
629	ENDIF
630
631	IF ( use_surface_fluxes ) THEN
632	WRITE ( io, 303 )
633	IF ( constant_heatflux ) THEN
634	WRITE ( io, 306 ) surface_heatflux
635	IF ( random_heatflux ) WRITE ( io, 307 )
636	ENDIF
637	IF ( humidity .AND. constant_waterflux ) THEN
638	WRITE ( io, 311 ) surface_waterflux
639	ENDIF
640	IF ( passive_scalar .AND. constant_waterflux ) THEN
641	WRITE ( io, 313 ) surface_waterflux
642	ENDIF
643	ENDIF
644
645	IF ( use_top_fluxes ) THEN
646	WRITE ( io, 304 )
647	IF ( coupling_mode == 'uncoupled' ) THEN
648	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
649	IF ( constant_top_heatflux ) THEN
650	WRITE ( io, 306 ) top_heatflux
651	ENDIF
652	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
653	WRITE ( io, 316 )
654	ENDIF
655	IF ( ocean .AND. constant_top_salinityflux ) THEN
656	WRITE ( io, 309 ) top_salinityflux
657	ENDIF
658	IF ( humidity .OR. passive_scalar ) THEN
659	WRITE ( io, 315 )
660	ENDIF
661	ENDIF
662
663	IF ( prandtl_layer ) THEN
664	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
665	rif_min, rif_max
666	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
667	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
668	WRITE ( io, 312 )
669	ENDIF
670	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
671	WRITE ( io, 314 )
672	ENDIF
673	ELSE
674	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
675	WRITE ( io, 310 ) rif_min, rif_max
676	ENDIF
677	ENDIF
678
679	WRITE ( io, 317 ) bc_lr, bc_ns
680	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
681	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
682	IF ( turbulent_inflow ) THEN
683	WRITE ( io, 319 ) recycling_width, recycling_plane, &
684	inflow_damping_height, inflow_damping_width
685	ENDIF
686	ENDIF
687
688	!
689	!-- Listing of 1D-profiles
690	WRITE ( io, 325 ) dt_dopr_listing
691	IF ( averaging_interval_pr /= 0.0 ) THEN
692	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
693	ENDIF
694
695	!
696	!-- DATA output
697	WRITE ( io, 330 )
698	IF ( averaging_interval_pr /= 0.0 ) THEN
699	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
700	ENDIF
701
702	!
703	!-- 1D-profiles
704	dopr_chr = 'Profile:'
705	IF ( dopr_n /= 0 ) THEN
706	WRITE ( io, 331 )
707
708	output_format = ''
709	IF ( netcdf_output ) THEN
710	IF ( netcdf_data_format == 1 ) THEN
711	output_format = 'NetCDF classic'
712	ELSE
713	output_format = 'NetCDF 64bit offset'
714	ENDIF
715	ENDIF
716	IF ( profil_output ) THEN
717	IF ( netcdf_output ) THEN
718	output_format = TRIM( output_format ) // ' and profil'
719	ELSE
720	output_format = 'profil'
721	ENDIF
722	ENDIF
723	WRITE ( io, 344 ) output_format
724
725	DO i = 1, dopr_n
726	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
727	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
728	WRITE ( io, 332 ) dopr_chr
729	dopr_chr = ' :'
730	ENDIF
731	ENDDO
732
733	IF ( dopr_chr /= '' ) THEN
734	WRITE ( io, 332 ) dopr_chr
735	ENDIF
736	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
737	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
738	ENDIF
739
740	!
741	!-- 2D-arrays
742	DO av = 0, 1
743
744	i = 1
745	do2d_xy = ''
746	do2d_xz = ''
747	do2d_yz = ''
748	DO WHILE ( do2d(av,i) /= ' ' )
749
750	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
751	do2d_mode = do2d(av,i)(l-1:l)
752
753	SELECT CASE ( do2d_mode )
754	CASE ( 'xy' )
755	ll = LEN_TRIM( do2d_xy )
756	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
757	CASE ( 'xz' )
758	ll = LEN_TRIM( do2d_xz )
759	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
760	CASE ( 'yz' )
761	ll = LEN_TRIM( do2d_yz )
762	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
763	END SELECT
764
765	i = i + 1
766
767	ENDDO
768
769	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
770	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
771	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
772	( netcdf_output .OR. iso2d_output ) ) THEN
773
774	IF ( av == 0 ) THEN
775	WRITE ( io, 334 ) ''
776	ELSE
777	WRITE ( io, 334 ) '(time-averaged)'
778	ENDIF
779
780	IF ( do2d_at_begin ) THEN
781	begin_chr = 'and at the start'
782	ELSE
783	begin_chr = ''
784	ENDIF
785
786	output_format = ''
787	IF ( netcdf_output ) THEN
788	IF ( netcdf_data_format == 1 ) THEN
789	output_format = 'NetCDF classic'
790	ELSEIF ( netcdf_data_format == 2 ) THEN
791	output_format = 'NetCDF 64bit offset'
792	ELSEIF ( netcdf_data_format == 3 ) THEN
793	output_format = 'NetCDF4/HDF5'
794	ELSEIF ( netcdf_data_format == 4 ) THEN
795	output_format = 'NetCDF4/HDF5 clasic'
796	ENDIF
797	ENDIF
798	IF ( iso2d_output ) THEN
799	IF ( netcdf_output ) THEN
800	output_format = TRIM( output_format ) // ' and iso2d'
801	ELSE
802	output_format = 'iso2d'
803	ENDIF
804	ENDIF
805	WRITE ( io, 344 ) output_format
806
807	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
808	i = 1
809	slices = '/'
810	coordinates = '/'
811	!
812	!-- Building strings with index and coordinate informations of the
813	!-- slices
814	DO WHILE ( section(i,1) /= -9999 )
815
816	WRITE (section_chr,'(I5)') section(i,1)
817	section_chr = ADJUSTL( section_chr )
818	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
819
820	IF ( section(i,1) == -1 ) THEN
821	WRITE (coor_chr,'(F10.1)') -1.0
822	ELSE
823	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
824	ENDIF
825	coor_chr = ADJUSTL( coor_chr )
826	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
827
828	i = i + 1
829	ENDDO
830	IF ( av == 0 ) THEN
831	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
832	TRIM( begin_chr ), 'k', TRIM( slices ), &
833	TRIM( coordinates )
834	IF ( skip_time_do2d_xy /= 0.0 ) THEN
835	WRITE ( io, 339 ) skip_time_do2d_xy
836	ENDIF
837	ELSE
838	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
839	TRIM( begin_chr ), averaging_interval, &
840	dt_averaging_input, 'k', TRIM( slices ), &
841	TRIM( coordinates )
842	IF ( skip_time_data_output_av /= 0.0 ) THEN
843	WRITE ( io, 339 ) skip_time_data_output_av
844	ENDIF
845	ENDIF
846
847	ENDIF
848
849	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
850	i = 1
851	slices = '/'
852	coordinates = '/'
853	!
854	!-- Building strings with index and coordinate informations of the
855	!-- slices
856	DO WHILE ( section(i,2) /= -9999 )
857
858	WRITE (section_chr,'(I5)') section(i,2)
859	section_chr = ADJUSTL( section_chr )
860	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
861
862	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
863	coor_chr = ADJUSTL( coor_chr )
864	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
865
866	i = i + 1
867	ENDDO
868	IF ( av == 0 ) THEN
869	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
870	TRIM( begin_chr ), 'j', TRIM( slices ), &
871	TRIM( coordinates )
872	IF ( skip_time_do2d_xz /= 0.0 ) THEN
873	WRITE ( io, 339 ) skip_time_do2d_xz
874	ENDIF
875	ELSE
876	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
877	TRIM( begin_chr ), averaging_interval, &
878	dt_averaging_input, 'j', TRIM( slices ), &
879	TRIM( coordinates )
880	IF ( skip_time_data_output_av /= 0.0 ) THEN
881	WRITE ( io, 339 ) skip_time_data_output_av
882	ENDIF
883	ENDIF
884	ENDIF
885
886	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
887	i = 1
888	slices = '/'
889	coordinates = '/'
890	!
891	!-- Building strings with index and coordinate informations of the
892	!-- slices
893	DO WHILE ( section(i,3) /= -9999 )
894
895	WRITE (section_chr,'(I5)') section(i,3)
896	section_chr = ADJUSTL( section_chr )
897	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
898
899	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
900	coor_chr = ADJUSTL( coor_chr )
901	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
902
903	i = i + 1
904	ENDDO
905	IF ( av == 0 ) THEN
906	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
907	TRIM( begin_chr ), 'i', TRIM( slices ), &
908	TRIM( coordinates )
909	IF ( skip_time_do2d_yz /= 0.0 ) THEN
910	WRITE ( io, 339 ) skip_time_do2d_yz
911	ENDIF
912	ELSE
913	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
914	TRIM( begin_chr ), averaging_interval, &
915	dt_averaging_input, 'i', TRIM( slices ), &
916	TRIM( coordinates )
917	IF ( skip_time_data_output_av /= 0.0 ) THEN
918	WRITE ( io, 339 ) skip_time_data_output_av
919	ENDIF
920	ENDIF
921	ENDIF
922
923	ENDIF
924
925	ENDDO
926
927	!
928	!-- 3d-arrays
929	DO av = 0, 1
930
931	i = 1
932	do3d_chr = ''
933	DO WHILE ( do3d(av,i) /= ' ' )
934
935	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
936	i = i + 1
937
938	ENDDO
939
940	IF ( do3d_chr /= '' ) THEN
941	IF ( av == 0 ) THEN
942	WRITE ( io, 336 ) ''
943	ELSE
944	WRITE ( io, 336 ) '(time-averaged)'
945	ENDIF
946
947	output_format = ''
948	IF ( netcdf_output ) THEN
949	IF ( netcdf_data_format == 1 ) THEN
950	output_format = 'NetCDF classic'
951	ELSEIF ( netcdf_data_format == 2 ) THEN
952	output_format = 'NetCDF 64bit offset'
953	ELSEIF ( netcdf_data_format == 3 ) THEN
954	output_format = 'NetCDF4/HDF5'
955	ELSEIF ( netcdf_data_format == 4 ) THEN
956	output_format = 'NetCDF4/HDF5 clasic'
957	ENDIF
958	ENDIF
959	IF ( avs_output ) THEN
960	IF ( netcdf_output ) THEN
961	output_format = TRIM( output_format ) // ' and avs'
962	ELSE
963	output_format = 'avs'
964	ENDIF
965	ENDIF
966	WRITE ( io, 344 ) output_format
967
968	IF ( do3d_at_begin ) THEN
969	begin_chr = 'and at the start'
970	ELSE
971	begin_chr = ''
972	ENDIF
973	IF ( av == 0 ) THEN
974	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
975	zu(nz_do3d), nz_do3d
976	ELSE
977	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
978	TRIM( begin_chr ), averaging_interval, &
979	dt_averaging_input, zu(nz_do3d), nz_do3d
980	ENDIF
981
982	IF ( do3d_compress ) THEN
983	do3d_chr = ''
984	i = 1
985	DO WHILE ( do3d(av,i) /= ' ' )
986
987	SELECT CASE ( do3d(av,i) )
988	CASE ( 'u' )
989	j = 1
990	CASE ( 'v' )
991	j = 2
992	CASE ( 'w' )
993	j = 3
994	CASE ( 'p' )
995	j = 4
996	CASE ( 'pt' )
997	j = 5
998	END SELECT
999	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1000	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1001	':' // prec // ','
1002	i = i + 1
1003
1004	ENDDO
1005	WRITE ( io, 338 ) do3d_chr
1006
1007	ENDIF
1008
1009	IF ( av == 0 ) THEN
1010	IF ( skip_time_do3d /= 0.0 ) THEN
1011	WRITE ( io, 339 ) skip_time_do3d
1012	ENDIF
1013	ELSE
1014	IF ( skip_time_data_output_av /= 0.0 ) THEN
1015	WRITE ( io, 339 ) skip_time_data_output_av
1016	ENDIF
1017	ENDIF
1018
1019	ENDIF
1020
1021	ENDDO
1022
1023	!
1024	!-- masked arrays
1025	IF ( masks > 0 ) WRITE ( io, 345 ) &
1026	mask_scale_x, mask_scale_y, mask_scale_z
1027	DO mid = 1, masks
1028	DO av = 0, 1
1029
1030	i = 1
1031	domask_chr = ''
1032	DO WHILE ( domask(mid,av,i) /= ' ' )
1033	domask_chr = TRIM( domask_chr ) // ' ' // &
1034	TRIM( domask(mid,av,i) ) // ','
1035	i = i + 1
1036	ENDDO
1037
1038	IF ( domask_chr /= '' ) THEN
1039	IF ( av == 0 ) THEN
1040	WRITE ( io, 346 ) '', mid
1041	ELSE
1042	WRITE ( io, 346 ) ' (time-averaged)', mid
1043	ENDIF
1044
1045	output_format = ''
1046	IF ( netcdf_output ) THEN
1047	IF ( netcdf_data_format == 1 ) THEN
1048	output_format = 'NetCDF classic'
1049	ELSEIF ( netcdf_data_format == 2 ) THEN
1050	output_format = 'NetCDF 64bit offset'
1051	ELSEIF ( netcdf_data_format == 3 ) THEN
1052	output_format = 'NetCDF4/HDF5'
1053	ELSEIF ( netcdf_data_format == 4 ) THEN
1054	output_format = 'NetCDF4/HDF5 clasic'
1055	ENDIF
1056	ENDIF
1057	WRITE ( io, 344 ) output_format
1058
1059	IF ( av == 0 ) THEN
1060	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1061	ELSE
1062	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1063	averaging_interval, dt_averaging_input
1064	ENDIF
1065
1066	IF ( av == 0 ) THEN
1067	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1068	WRITE ( io, 339 ) skip_time_domask(mid)
1069	ENDIF
1070	ELSE
1071	IF ( skip_time_data_output_av /= 0.0 ) THEN
1072	WRITE ( io, 339 ) skip_time_data_output_av
1073	ENDIF
1074	ENDIF
1075	!
1076	!-- output locations
1077	DO dim = 1, 3
1078	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1079	count = 0
1080	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1081	count = count + 1
1082	ENDDO
1083	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1084	mask(mid,dim,:count)
1085	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1086	mask_loop(mid,dim,2) < 0.0 .AND. &
1087	mask_loop(mid,dim,3) == 0.0 ) THEN
1088	WRITE ( io, 350 ) dir(dim), dir(dim)
1089	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1090	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1091	mask_loop(mid,dim,1:2)
1092	ELSE
1093	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1094	mask_loop(mid,dim,1:3)
1095	ENDIF
1096	ENDDO
1097	ENDIF
1098
1099	ENDDO
1100	ENDDO
1101
1102	!
1103	!-- Timeseries
1104	IF ( dt_dots /= 9999999.9 ) THEN
1105	WRITE ( io, 340 )
1106
1107	output_format = ''
1108	IF ( netcdf_output ) THEN
1109	IF ( netcdf_data_format == 1 ) THEN
1110	output_format = 'NetCDF classic'
1111	ELSE
1112	output_format = 'NetCDF 64bit offset'
1113	ENDIF
1114	ENDIF
1115	IF ( profil_output ) THEN
1116	IF ( netcdf_output ) THEN
1117	output_format = TRIM( output_format ) // ' and profil'
1118	ELSE
1119	output_format = 'profil'
1120	ENDIF
1121	ENDIF
1122	WRITE ( io, 344 ) output_format
1123	WRITE ( io, 341 ) dt_dots
1124	ENDIF
1125
1126	#if defined( __dvrp_graphics )
1127	!
1128	!-- Dvrp-output
1129	IF ( dt_dvrp /= 9999999.9 ) THEN
1130	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1131	TRIM( dvrp_username ), TRIM( dvrp_directory )
1132	i = 1
1133	l = 0
1134	m = 0
1135	DO WHILE ( mode_dvrp(i) /= ' ' )
1136	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1137	READ ( mode_dvrp(i), '(10X,I2)' ) j
1138	l = l + 1
1139	IF ( do3d(0,j) /= ' ' ) THEN
1140	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1141	isosurface_color(:,l)
1142	ENDIF
1143	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1144	READ ( mode_dvrp(i), '(6X,I2)' ) j
1145	m = m + 1
1146	IF ( do2d(0,j) /= ' ' ) THEN
1147	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1148	slicer_range_limits_dvrp(:,m)
1149	ENDIF
1150	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1151	WRITE ( io, 363 ) dvrp_psize
1152	IF ( particle_dvrpsize /= 'none' ) THEN
1153	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1154	dvrpsize_interval
1155	ENDIF
1156	IF ( particle_color /= 'none' ) THEN
1157	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1158	color_interval
1159	ENDIF
1160	ENDIF
1161	i = i + 1
1162	ENDDO
1163
1164	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1165	superelevation_y, superelevation, clip_dvrp_l, &
1166	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1167
1168	IF ( TRIM( topography ) /= 'flat' ) THEN
1169	WRITE ( io, 366 ) topography_color
1170	IF ( cluster_size > 1 ) THEN
1171	WRITE ( io, 367 ) cluster_size
1172	ENDIF
1173	ENDIF
1174
1175	ENDIF
1176	#endif
1177
1178	#if defined( __spectra )
1179	!
1180	!-- Spectra output
1181	IF ( dt_dosp /= 9999999.9 ) THEN
1182	WRITE ( io, 370 )
1183
1184	output_format = ''
1185	IF ( netcdf_output ) THEN
1186	IF ( netcdf_data_format == 1 ) THEN
1187	output_format = 'NetCDF classic'
1188	ELSE
1189	output_format = 'NetCDF 64bit offset'
1190	ENDIF
1191	ENDIF
1192	IF ( profil_output ) THEN
1193	IF ( netcdf_output ) THEN
1194	output_format = TRIM( output_format ) // ' and profil'
1195	ELSE
1196	output_format = 'profil'
1197	ENDIF
1198	ENDIF
1199	WRITE ( io, 344 ) output_format
1200	WRITE ( io, 371 ) dt_dosp
1201	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1202	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1203	( spectra_direction(i), i = 1,10 ), &
1204	( comp_spectra_level(i), i = 1,100 ), &
1205	( plot_spectra_level(i), i = 1,100 ), &
1206	averaging_interval_sp, dt_averaging_input_pr
1207	ENDIF
1208	#endif
1209
1210	WRITE ( io, 99 )
1211
1212	!
1213	!-- Physical quantities
1214	WRITE ( io, 400 )
1215
1216	!
1217	!-- Geostrophic parameters
1218	WRITE ( io, 410 ) omega, phi, f, fs
1219
1220	!
1221	!-- Other quantities
1222	WRITE ( io, 411 ) g
1223	IF ( use_reference ) THEN
1224	IF ( ocean ) THEN
1225	WRITE ( io, 412 ) prho_reference
1226	ELSE
1227	WRITE ( io, 413 ) pt_reference
1228	ENDIF
1229	ENDIF
1230
1231	!
1232	!-- Cloud physics parameters
1233	IF ( cloud_physics ) THEN
1234	WRITE ( io, 415 )
1235	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1236	ENDIF
1237
1238	!-- Profile of the geostrophic wind (component ug)
1239	!-- Building output strings
1240	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1241	gradients = '------'
1242	slices = ' 0'
1243	coordinates = ' 0.0'
1244	i = 1
1245	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1246
1247	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1248	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1249
1250	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1251	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1252
1253	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1254	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1255
1256	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1257	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1258
1259	IF ( i == 10 ) THEN
1260	EXIT
1261	ELSE
1262	i = i + 1
1263	ENDIF
1264
1265	ENDDO
1266
1267	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1268	TRIM( gradients ), TRIM( slices )
1269
1270	!-- Profile of the geostrophic wind (component vg)
1271	!-- Building output strings
1272	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1273	gradients = '------'
1274	slices = ' 0'
1275	coordinates = ' 0.0'
1276	i = 1
1277	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1278
1279	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1280	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1281
1282	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1283	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1284
1285	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1286	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1287
1288	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1289	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1290
1291	IF ( i == 10 ) THEN
1292	EXIT
1293	ELSE
1294	i = i + 1
1295	ENDIF
1296
1297	ENDDO
1298
1299	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1300	TRIM( gradients ), TRIM( slices )
1301
1302	!
1303	!-- Initial temperature profile
1304	!-- Building output strings, starting with surface temperature
1305	WRITE ( temperatures, '(F6.2)' ) pt_surface
1306	gradients = '------'
1307	slices = ' 0'
1308	coordinates = ' 0.0'
1309	i = 1
1310	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1311
1312	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1313	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1314
1315	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1316	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1317
1318	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1319	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1320
1321	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1322	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1323
1324	IF ( i == 10 ) THEN
1325	EXIT
1326	ELSE
1327	i = i + 1
1328	ENDIF
1329
1330	ENDDO
1331
1332	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1333	TRIM( gradients ), TRIM( slices )
1334
1335	!
1336	!-- Initial humidity profile
1337	!-- Building output strings, starting with surface humidity
1338	IF ( humidity .OR. passive_scalar ) THEN
1339	WRITE ( temperatures, '(E8.1)' ) q_surface
1340	gradients = '--------'
1341	slices = ' 0'
1342	coordinates = ' 0.0'
1343	i = 1
1344	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1345
1346	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1347	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1348
1349	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1350	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1351
1352	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1353	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1354
1355	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1356	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1357
1358	IF ( i == 10 ) THEN
1359	EXIT
1360	ELSE
1361	i = i + 1
1362	ENDIF
1363
1364	ENDDO
1365
1366	IF ( humidity ) THEN
1367	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1368	TRIM( gradients ), TRIM( slices )
1369	ELSE
1370	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1371	TRIM( gradients ), TRIM( slices )
1372	ENDIF
1373	ENDIF
1374
1375	!
1376	!-- Initial salinity profile
1377	!-- Building output strings, starting with surface salinity
1378	IF ( ocean ) THEN
1379	WRITE ( temperatures, '(F6.2)' ) sa_surface
1380	gradients = '------'
1381	slices = ' 0'
1382	coordinates = ' 0.0'
1383	i = 1
1384	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1385
1386	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1387	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1388
1389	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1390	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1391
1392	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1393	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1394
1395	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1396	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1397
1398	IF ( i == 10 ) THEN
1399	EXIT
1400	ELSE
1401	i = i + 1
1402	ENDIF
1403
1404	ENDDO
1405
1406	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1407	TRIM( gradients ), TRIM( slices )
1408	ENDIF
1409
1410	!
1411	!-- Profile for the large scale vertial velocity
1412	!-- Building output strings, starting with surface value
1413	IF ( large_scale_subsidence ) THEN
1414	temperatures = ' 0.0'
1415	gradients = '------'
1416	slices = ' 0'
1417	coordinates = ' 0.0'
1418	i = 1
1419	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1420
1421	WRITE (coor_chr,'(E10.2,7X)') &
1422	w_subs(subs_vertical_gradient_level_i(i))
1423	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1424
1425	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1426	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1427
1428	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1429	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1430
1431	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1432	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1433
1434	IF ( i == 10 ) THEN
1435	EXIT
1436	ELSE
1437	i = i + 1
1438	ENDIF
1439
1440	ENDDO
1441
1442	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1443	TRIM( gradients ), TRIM( slices )
1444	ENDIF
1445
1446	!
1447	!-- LES / turbulence parameters
1448	WRITE ( io, 450 )
1449
1450	!--
1451	! ... LES-constants used must still be added here
1452	!--
1453	IF ( constant_diffusion ) THEN
1454	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1455	prandtl_number
1456	ENDIF
1457	IF ( .NOT. constant_diffusion) THEN
1458	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1459	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1460	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1461	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1462	ENDIF
1463
1464	!
1465	!-- Special actions during the run
1466	WRITE ( io, 470 )
1467	IF ( create_disturbances ) THEN
1468	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1469	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1470	zu(disturbance_level_ind_t), disturbance_level_ind_t
1471	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1472	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1473	ELSE
1474	WRITE ( io, 473 ) disturbance_energy_limit
1475	ENDIF
1476	WRITE ( io, 474 ) TRIM( random_generator )
1477	ENDIF
1478	IF ( pt_surface_initial_change /= 0.0 ) THEN
1479	WRITE ( io, 475 ) pt_surface_initial_change
1480	ENDIF
1481	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1482	WRITE ( io, 476 ) q_surface_initial_change
1483	ENDIF
1484	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1485	WRITE ( io, 477 ) q_surface_initial_change
1486	ENDIF
1487
1488	IF ( particle_advection ) THEN
1489	!
1490	!-- Particle attributes
1491	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1492	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1493	end_time_prel, dt_sort_particles
1494	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1495	IF ( random_start_position ) WRITE ( io, 481 )
1496	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1497	WRITE ( io, 495 ) total_number_of_particles
1498	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1499	WRITE ( io, 483 ) maximum_number_of_tailpoints
1500	IF ( minimum_tailpoint_distance /= 0 ) THEN
1501	WRITE ( io, 484 ) total_number_of_tails, &
1502	minimum_tailpoint_distance, &
1503	maximum_tailpoint_age
1504	ENDIF
1505	ENDIF
1506	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1507	WRITE ( io, 485 ) dt_write_particle_data
1508	output_format = ''
1509	IF ( netcdf_output ) THEN
1510	IF ( netcdf_data_format > 1 ) THEN
1511	output_format = 'netcdf (64 bit offset) and binary'
1512	ELSE
1513	output_format = 'netcdf and binary'
1514	ENDIF
1515	ELSE
1516	output_format = 'binary'
1517	ENDIF
1518	WRITE ( io, 344 ) output_format
1519	ENDIF
1520	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1521	IF ( write_particle_statistics ) WRITE ( io, 486 )
1522
1523	WRITE ( io, 487 ) number_of_particle_groups
1524
1525	DO i = 1, number_of_particle_groups
1526	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1527	WRITE ( io, 490 ) i, 0.0
1528	WRITE ( io, 492 )
1529	ELSE
1530	WRITE ( io, 490 ) i, radius(i)
1531	IF ( density_ratio(i) /= 0.0 ) THEN
1532	WRITE ( io, 491 ) density_ratio(i)
1533	ELSE
1534	WRITE ( io, 492 )
1535	ENDIF
1536	ENDIF
1537	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1538	pdx(i), pdy(i), pdz(i)
1539	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1540	ENDDO
1541
1542	ENDIF
1543
1544
1545	!
1546	!-- Parameters of 1D-model
1547	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1548	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1549	mixing_length_1d, dissipation_1d
1550	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1551	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1552	ENDIF
1553	ENDIF
1554
1555	!
1556	!-- User-defined informations
1557	CALL user_header( io )
1558
1559	WRITE ( io, 99 )
1560
1561	!
1562	!-- Write buffer contents to disc immediately
1563	CALL local_flush( io )
1564
1565	!
1566	!-- Here the FORMATs start
1567
1568	99 FORMAT (1X,78('-'))
1569	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1570	1X,'* ',A,' *',9X,A/ &
1571	1X,'***************************',9X,42('-'))
1572	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1573	37X,42('-'))
1574	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1575	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1576	' Run on host: ',A10)
1577	#if defined( __parallel )
1578	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1579	')',1X,A)
1580	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1581	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1582	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1583	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1584	37X,'because the job is running on an SMP-cluster')
1585	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1586	#endif
1587	110 FORMAT (/' Numerical Schemes:'/ &
1588	' -----------------'/)
1589	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1590	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1591	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1592	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1593	' or Upstream')
1594	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1595	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1596	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1597	' or Upstream')
1598	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1599	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1600	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1601	' Translation velocity = ',A/ &
1602	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1603	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1604	' of timestep changes)')
1605	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1606	' timestep changes')
1607	122 FORMAT (' --> Time differencing scheme: ',A)
1608	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1609	' maximum damping coefficient: ',F5.3, ' 1/s')
1610	124 FORMAT (' Spline-overshoots are being suppressed')
1611	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1612	' of'/ &
1613	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1614	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1615	' of'/ &
1616	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1617	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1618	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1619	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1620	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1621	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1622	130 FORMAT (' --> Additional prognostic equation for the total water content')
1623	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1624	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1625	' effective emissivity scheme')
1626	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1627	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1628	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1629	A,'-cycle)'/ &
1630	' number of grid levels: ',I2/ &
1631	' Gauss-Seidel red/black iterations: ',I2)
1632	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1633	I3,')')
1634	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1635	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1636	I3,')'/ &
1637	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1638	I3,')')
1639	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1640	139 FORMAT (' --> Loop optimization method: ',A)
1641	140 FORMAT (' maximum residual allowed: ',E10.3)
1642	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1643	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1644	'step')
1645	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1646	'kinetic energy')
1647	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1648	'conserved'/ &
1649	' using the ',A,' mode')
1650	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1651	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1652	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1653	/' starting from dp_level_b =', F8.3, 'm', A /)
1654	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1655	'prognostic equation for')
1656	154 FORMAT (' the potential temperature')
1657	200 FORMAT (//' Run time and time step information:'/ &
1658	' ----------------------------------'/)
1659	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1660	' CFL-factor: ',F4.2)
1661	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1662	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1663	' End time: ',F9.3,' s')
1664	204 FORMAT ( A,F9.3,' s')
1665	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1666	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1667	' CPU-time used: ',F9.3,' s per timestep: ', &
1668	' ',F9.3,' s'/ &
1669	' per second of simulated tim', &
1670	'e: ',F9.3,' s')
1671	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1672	250 FORMAT (//' Computational grid and domain size:'/ &
1673	' ----------------------------------'// &
1674	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1675	' m dz = ',F7.3,' m'/ &
1676	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1677	' m z(u) = ',F10.3,' m'/)
1678	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1679	' factor: ',F5.3/ &
1680	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1681	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1682	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1683	255 FORMAT (' Subdomains have equal size')
1684	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1685	'have smaller sizes'/ &
1686	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1687	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1688	' degrees')
1689	270 FORMAT (//' Topography informations:'/ &
1690	' -----------------------'// &
1691	1X,'Topography: ',A)
1692	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1693	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1694	' / ',I4)
1695	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1696	' direction' / &
1697	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1698	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1699	278 FORMAT (' Topography grid definition convention:'/ &
1700	' cell edge (staggered grid points'/ &
1701	' (u in x-direction, v in y-direction))' /)
1702	279 FORMAT (' Topography grid definition convention:'/ &
1703	' cell center (scalar grid points)' /)
1704	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1705	' ------------------------------'// &
1706	' Canopy mode: ', A / &
1707	' Canopy top: ',I4 / &
1708	' Leaf drag coefficient: ',F6.2 /)
1709	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1710	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1711	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1712	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1713	' Height: ',A,' m'/ &
1714	' Leaf area density: ',A,' m2/m3'/ &
1715	' Gradient: ',A,' m2/m4'/ &
1716	' Gridpoint: ',A)
1717
1718	300 FORMAT (//' Boundary conditions:'/ &
1719	' -------------------'// &
1720	' p uv ', &
1721	' pt'// &
1722	' B. bound.: ',A/ &
1723	' T. bound.: ',A)
1724	301 FORMAT (/' ',A// &
1725	' B. bound.: ',A/ &
1726	' T. bound.: ',A)
1727	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1728	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1729	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1730	'computational u,v-level:'// &
1731	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1732	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1733	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1734	307 FORMAT (' Heatflux has a random normal distribution')
1735	308 FORMAT (' Predefined surface temperature')
1736	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1737	310 FORMAT (//' 1D-Model:'// &
1738	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1739	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1740	312 FORMAT (' Predefined surface humidity')
1741	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1742	314 FORMAT (' Predefined scalar value at the surface')
1743	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1744	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1745	'atmosphere model')
1746	317 FORMAT (//' Lateral boundaries:'/ &
1747	' left/right: ',A/ &
1748	' north/south: ',A)
1749	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1750	'max =',F5.1,' m**2/s')
1751	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1752	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1753	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1754	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1755	' v: ',F9.6,' m2/s2')
1756	325 FORMAT (//' List output:'/ &
1757	' -----------'// &
1758	' 1D-Profiles:'/ &
1759	' Output every ',F8.2,' s')
1760	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1761	' Averaging input every ',F8.2,' s')
1762	330 FORMAT (//' Data output:'/ &
1763	' -----------'/)
1764	331 FORMAT (/' 1D-Profiles:')
1765	332 FORMAT (/' ',A)
1766	333 FORMAT (' Output every ',F8.2,' s',/ &
1767	' Time averaged over ',F8.2,' s'/ &
1768	' Averaging input every ',F8.2,' s')
1769	334 FORMAT (/' 2D-Arrays',A,':')
1770	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1771	' Output every ',F8.2,' s ',A/ &
1772	' Cross sections at ',A1,' = ',A/ &
1773	' scalar-coordinates: ',A,' m'/)
1774	336 FORMAT (/' 3D-Arrays',A,':')
1775	337 FORMAT (/' Arrays: ',A/ &
1776	' Output every ',F8.2,' s ',A/ &
1777	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1778	338 FORMAT (' Compressed data output'/ &
1779	' Decimal precision: ',A/)
1780	339 FORMAT (' No output during initial ',F8.2,' s')
1781	340 FORMAT (/' Time series:')
1782	341 FORMAT (' Output every ',F8.2,' s'/)
1783	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1784	' Output every ',F8.2,' s ',A/ &
1785	' Time averaged over ',F8.2,' s'/ &
1786	' Averaging input every ',F8.2,' s'/ &
1787	' Cross sections at ',A1,' = ',A/ &
1788	' scalar-coordinates: ',A,' m'/)
1789	343 FORMAT (/' Arrays: ',A/ &
1790	' Output every ',F8.2,' s ',A/ &
1791	' Time averaged over ',F8.2,' s'/ &
1792	' Averaging input every ',F8.2,' s'/ &
1793	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1794	344 FORMAT (' Output format: ',A/)
1795	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1796	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1797	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1798	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1799	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1800	347 FORMAT (' Variables: ',A/ &
1801	' Output every ',F8.2,' s')
1802	348 FORMAT (' Variables: ',A/ &
1803	' Output every ',F8.2,' s'/ &
1804	' Time averaged over ',F8.2,' s'/ &
1805	' Averaging input every ',F8.2,' s')
1806	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1807	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1808	13(' ',8(F8.2,',')/) )
1809	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1810	'all gridpoints along ',A,'-direction (default).' )
1811	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1812	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1813	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1814	#if defined( __dvrp_graphics )
1815	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1816	' Output every ',F7.1,' s'/ &
1817	' Output mode: ',A/ &
1818	' Host / User: ',A,' / ',A/ &
1819	' Directory: ',A// &
1820	' The sequence contains:')
1821	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1822	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1823	362 FORMAT (/' Slicer plane ',A/ &
1824	' Slicer limits: [',F6.2,',',F6.2,']')
1825	363 FORMAT (/' Particles'/ &
1826	' particle size: ',F7.2,' m')
1827	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1828	F6.2,',',F6.2,']')
1829	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1830	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1831	')'/ &
1832	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1833	' from y = ',F9.1,' m to y = ',F9.1,' m')
1834	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1835	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1836	#endif
1837	#if defined( __spectra )
1838	370 FORMAT (' Spectra:')
1839	371 FORMAT (' Output every ',F7.1,' s'/)
1840	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1841	' Directions: ', 10(A5,',')/ &
1842	' height levels k = ', 20(I3,',')/ &
1843	' ', 20(I3,',')/ &
1844	' ', 20(I3,',')/ &
1845	' ', 20(I3,',')/ &
1846	' ', 19(I3,','),I3,'.'/ &
1847	' height levels selected for standard plot:'/ &
1848	' k = ', 20(I3,',')/ &
1849	' ', 20(I3,',')/ &
1850	' ', 20(I3,',')/ &
1851	' ', 20(I3,',')/ &
1852	' ', 19(I3,','),I3,'.'/ &
1853	' Time averaged over ', F7.1, ' s,' / &
1854	' Profiles for the time averaging are taken every ', &
1855	F6.1,' s')
1856	#endif
1857	400 FORMAT (//' Physical quantities:'/ &
1858	' -------------------'/)
1859	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1860	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1861	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1862	' f* = ',F9.6,' 1/s')
1863	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1864	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1865	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1866	415 FORMAT (/' Cloud physics parameters:'/ &
1867	' ------------------------'/)
1868	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1869	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1870	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1871	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1872	' Vapourization heat : L_v = ',E8.2,' J/kg')
1873	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1874	' Height: ',A,' m'/ &
1875	' Temperature: ',A,' K'/ &
1876	' Gradient: ',A,' K/100m'/ &
1877	' Gridpoint: ',A)
1878	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1879	' Height: ',A,' m'/ &
1880	' Humidity: ',A,' kg/kg'/ &
1881	' Gradient: ',A,' (kg/kg)/100m'/ &
1882	' Gridpoint: ',A)
1883	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1884	' Height: ',A,' m'/ &
1885	' Scalar concentration: ',A,' kg/m**3'/ &
1886	' Gradient: ',A,' (kg/m**3)/100m'/ &
1887	' Gridpoint: ',A)
1888	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1889	' Height: ',A,' m'/ &
1890	' ug: ',A,' m/s'/ &
1891	' Gradient: ',A,' 1/100s'/ &
1892	' Gridpoint: ',A)
1893	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1894	' Height: ',A,' m'/ &
1895	' vg: ',A,' m/s'/ &
1896	' Gradient: ',A,' 1/100s'/ &
1897	' Gridpoint: ',A)
1898	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1899	' Height: ',A,' m'/ &
1900	' Salinity: ',A,' psu'/ &
1901	' Gradient: ',A,' psu/100m'/ &
1902	' Gridpoint: ',A)
1903	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1904	' Height: ',A,' m'/ &
1905	' w_subs: ',A,' m/s'/ &
1906	' Gradient: ',A,' (m/s)/100m'/ &
1907	' Gridpoint: ',A)
1908	450 FORMAT (//' LES / Turbulence quantities:'/ &
1909	' ---------------------------'/)
1910	451 FORMAT (' Diffusion coefficients are constant:'/ &
1911	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1912	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1913	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1914	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1915	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1916	470 FORMAT (//' Actions during the simulation:'/ &
1917	' -----------------------------'/)
1918	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1919	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1920	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1921	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1922	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1923	' to i/j =',I4)
1924	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1925	1X,F5.3, ' m2/s2')
1926	474 FORMAT (' Random number generator used : ',A/)
1927	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1928	'respectively, if'/ &
1929	' the value is negative) by ',F5.2,' K at the beginning of the',&
1930	' 3D-simulation'/)
1931	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1932	'respectively, if the'/ &
1933	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1934	' the 3D-simulation'/)
1935	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1936	'respectively, if the'/ &
1937	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1938	' the 3D-simulation'/)
1939	480 FORMAT (' Particles:'/ &
1940	' ---------'// &
1941	' Particle advection is active (switched on at t = ', F7.1, &
1942	' s)'/ &
1943	' Start of new particle generations every ',F6.1,' s'/ &
1944	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1945	' bottom: ', A, ' top: ', A/&
1946	' Maximum particle age: ',F9.1,' s'/ &
1947	' Advection stopped at t = ',F9.1,' s'/ &
1948	' Particles are sorted every ',F9.1,' s'/)
1949	481 FORMAT (' Particles have random start positions'/)
1950	482 FORMAT (' Particles are advected only horizontally'/)
1951	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1952	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1953	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1954	' Maximum age of the end of the tail: ',F8.2,' s')
1955	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1956	486 FORMAT (' Particle statistics are written on file'/)
1957	487 FORMAT (' Number of particle groups: ',I2/)
1958	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1959	' minimum timestep for advection: ', F7.5/)
1960	489 FORMAT (' Number of particles simultaneously released at each ', &
1961	'point: ', I5/)
1962	490 FORMAT (' Particle group ',I2,':'/ &
1963	' Particle radius: ',E10.3, 'm')
1964	491 FORMAT (' Particle inertia is activated'/ &
1965	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1966	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1967	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1968	' y:',F8.1,' - ',F8.1,' m'/&
1969	' z:',F8.1,' - ',F8.1,' m'/&
1970	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1971	' m dz = ',F8.1,' m'/)
1972	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1973	F8.2,' s'/)
1974	495 FORMAT (' Number of particles in total domain: ',I10/)
1975	500 FORMAT (//' 1D-Model parameters:'/ &
1976	' -------------------'// &
1977	' Simulation time: ',F8.1,' s'/ &
1978	' Run-controll output every: ',F8.1,' s'/ &
1979	' Vertical profile output every: ',F8.1,' s'/ &
1980	' Mixing length calculation: ',A/ &
1981	' Dissipation calculation: ',A/)
1982	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1983
1984
1985	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |