Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 61

Last change on this file since 61 was 60, checked in by raasch, 18 years ago
preliminary update of further changes, running
Property svn:keywords set to `Id`
File size: 54.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Output of netcdf_64bit_3d, particles-package is now part of the default code.
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 60 2007-03-11 11:50:04Z raasch $
11	!
12	! 19 2007-02-23 04:53:48Z raasch
13	! Output of scalar flux applied at top boundary
14	!
15	! RCS Log replace by Id keyword, revision history cleaned up
16	!
17	! Revision 1.63 2006/08/22 13:53:13 raasch
18	! Output of dz_max
19	!
20	! Revision 1.1 1997/08/11 06:17:20 raasch
21	! Initial revision
22	!
23	!
24	! Description:
25	! ------------
26	! Writing a header with all important informations about the actual run.
27	! This subroutine is called three times, two times at the beginning
28	! (writing information on files RUN_CONTROL and HEADER) and one time at the
29	! end of the run, then writing additional information about CPU-usage on file
30	! header.
31	!------------------------------------------------------------------------------!
32
33	USE arrays_3d
34	USE control_parameters
35	USE cloud_parameters
36	USE cpulog
37	USE dvrp_variables
38	USE grid_variables
39	USE indices
40	USE model_1d
41	USE particle_attributes
42	USE pegrid
43	USE spectrum
44
45	IMPLICIT NONE
46
47	CHARACTER (LEN=1) :: prec
48	CHARACTER (LEN=2) :: do2d_mode
49	CHARACTER (LEN=5) :: section_chr
50	CHARACTER (LEN=9) :: time_to_string
51	CHARACTER (LEN=10) :: coor_chr, host_chr
52	CHARACTER (LEN=16) :: begin_chr
53	CHARACTER (LEN=40) :: output_format
54	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
55	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
56	run_classification, slices, temperatures, &
57	ugcomponent, vgcomponent
58	CHARACTER (LEN=85) :: roben, runten
59
60	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
61	REAL :: cpuseconds_per_simulated_second
62
63	!
64	!-- Open the output file. At the end of the simulation, output is directed
65	!-- to unit 19.
66	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
67	.NOT. simulated_time_at_begin /= simulated_time ) THEN
68	io = 15 ! header output on file RUN_CONTROL
69	ELSE
70	io = 19 ! header output on file HEADER
71	ENDIF
72	CALL check_open( io )
73
74	!
75	!-- At the end of the run, output file (HEADER) will be rewritten with
76	!-- new informations
77	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
78
79	!
80	!-- Determine kind of model run
81	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
82	run_classification = '3D - restart run'
83	ELSE
84	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
85	run_classification = '3D - run without 1D - prerun'
86	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
87	run_classification = '3D - run with 1D - prerun'
88	ELSE
89	PRINT*,'+++ header: unknown action(s): ',initializing_actions
90	ENDIF
91	ENDIF
92
93	!
94	!-- Run-identification, date, time, host
95	host_chr = host(1:10)
96	WRITE ( io, 100 ) version, TRIM( run_classification ), run_date, &
97	run_identifier, run_time, runnr, ADJUSTR( host_chr )
98	#if defined( __parallel )
99	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
100	char1 = 'calculated'
101	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
102	host(1:2) == 'lc' ) .AND. &
103	npex == -1 .AND. pdims(2) == 1 ) THEN
104	char1 = 'forced'
105	ELSE
106	char1 = 'predefined'
107	ENDIF
108	IF ( threads_per_task == 1 ) THEN
109	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
110	ELSE
111	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
112	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
113	ENDIF
114	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
115	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
116	npex == -1 .AND. pdims(2) == 1 ) &
117	THEN
118	WRITE ( io, 104 )
119	ELSEIF ( pdims(2) == 1 ) THEN
120	WRITE ( io, 105 ) 'x'
121	ELSEIF ( pdims(1) == 1 ) THEN
122	WRITE ( io, 105 ) 'y'
123	ENDIF
124	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
125	#endif
126	WRITE ( io, 99 )
127
128	!
129	!-- Numerical schemes
130	WRITE ( io, 110 )
131	IF ( psolver(1:7) == 'poisfft' ) THEN
132	WRITE ( io, 111 ) TRIM( fft_method )
133	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
134	ELSEIF ( psolver == 'sor' ) THEN
135	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
136	ELSEIF ( psolver == 'multigrid' ) THEN
137	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
138	IF ( mg_cycles == -1 ) THEN
139	WRITE ( io, 140 ) residual_limit
140	ELSE
141	WRITE ( io, 141 ) mg_cycles
142	ENDIF
143	IF ( mg_switch_to_pe0_level == 0 ) THEN
144	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
145	nzt_mg(1)
146	ELSE
147	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
148	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
149	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
150	nzt_mg(mg_switch_to_pe0_level), &
151	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
152	nzt_mg(1)
153	ENDIF
154	ENDIF
155	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
156	THEN
157	WRITE ( io, 142 )
158	ENDIF
159
160	IF ( momentum_advec == 'pw-scheme' ) THEN
161	WRITE ( io, 113 )
162	ELSE
163	WRITE ( io, 114 )
164	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
165	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
166	overshoot_limit_w /= 0.0 ) THEN
167	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
168	overshoot_limit_w
169	ENDIF
170	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
171	ups_limit_w /= 0.0 ) &
172	THEN
173	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
174	ENDIF
175	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
176	ENDIF
177	IF ( scalar_advec == 'pw-scheme' ) THEN
178	WRITE ( io, 116 )
179	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
180	WRITE ( io, 117 )
181	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
182	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
183	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
184	ENDIF
185	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
186	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
187	ENDIF
188	ELSE
189	WRITE ( io, 118 )
190	ENDIF
191	IF ( momentum_advec /= 'ups-scheme' .AND. scalar_advec /= 'ups-scheme' &
192	.AND. scalar_advec /= 'bc-scheme' .AND. host(1:3) /= 'nec' ) THEN
193	WRITE ( io, 139 )
194	ENDIF
195	IF ( galilei_transformation ) THEN
196	IF ( use_ug_for_galilei_tr ) THEN
197	char1 = 'geostrophic wind'
198	ELSE
199	char1 = 'mean wind in model domain'
200	ENDIF
201	IF ( simulated_time_at_begin == simulated_time ) THEN
202	char2 = 'at the start of the run'
203	ELSE
204	char2 = 'at the end of the run'
205	ENDIF
206	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
207	advected_distance_x/1000.0, advected_distance_y/1000.0
208	ENDIF
209	IF ( timestep_scheme == 'leapfrog' ) THEN
210	WRITE ( io, 120 )
211	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
212	WRITE ( io, 121 )
213	ELSE
214	WRITE ( io, 122 ) timestep_scheme
215	ENDIF
216	IF ( rayleigh_damping_factor /= 0.0 ) THEN
217	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
218	ENDIF
219	IF ( moisture ) THEN
220	IF ( .NOT. cloud_physics ) THEN
221	WRITE ( io, 129 )
222	ELSE
223	WRITE ( io, 130 )
224	WRITE ( io, 131 )
225	IF ( radiation ) WRITE ( io, 132 )
226	IF ( precipitation ) WRITE ( io, 133 )
227	ENDIF
228	ENDIF
229	IF ( passive_scalar ) WRITE ( io, 134 )
230	IF ( conserve_volume_flow ) WRITE ( io, 150 )
231	WRITE ( io, 99 )
232
233	!
234	!-- Runtime and timestep informations
235	WRITE ( io, 200 )
236	IF ( .NOT. dt_fixed ) THEN
237	WRITE ( io, 201 ) dt_max, cfl_factor
238	ELSE
239	WRITE ( io, 202 ) dt
240	ENDIF
241	WRITE ( io, 203 ) simulated_time_at_begin, end_time
242
243	IF ( time_restart /= 9999999.9 .AND. &
244	simulated_time_at_begin == simulated_time ) THEN
245	IF ( dt_restart == 9999999.9 ) THEN
246	WRITE ( io, 204 ) ' Restart at: ',time_restart
247	ELSE
248	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
249	ENDIF
250	ENDIF
251
252	IF ( simulated_time_at_begin /= simulated_time ) THEN
253	i = MAX ( log_point_s(10)%counts, 1 )
254	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
255	cpuseconds_per_simulated_second = 0.0
256	ELSE
257	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
258	( simulated_time - &
259	simulated_time_at_begin )
260	ENDIF
261	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
262	log_point_s(10)%sum / REAL( i ), &
263	cpuseconds_per_simulated_second
264	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
265	IF ( dt_restart == 9999999.9 ) THEN
266	WRITE ( io, 204 ) ' Next restart at: ',time_restart
267	ELSE
268	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
269	ENDIF
270	ENDIF
271	ENDIF
272
273	!
274	!-- Computational grid
275	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
276	IF ( dz_stretch_level_index < nzt+1 ) THEN
277	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
278	dz_stretch_factor, dz_max
279	ENDIF
280	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
281	MIN( nnz+2, nzt+2 )
282	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
283	WRITE ( io, 255 )
284	ELSE
285	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
286	ENDIF
287	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
288
289	!
290	!-- Topography
291	WRITE ( io, 270 ) topography
292	SELECT CASE ( TRIM( topography ) )
293
294	CASE ( 'flat' )
295	! no actions necessary
296
297	CASE ( 'single_building' )
298	blx = INT( building_length_x / dx )
299	bly = INT( building_length_y / dy )
300	bh = INT( building_height / dz )
301
302	IF ( building_wall_left == 9999999.9 ) THEN
303	building_wall_left = ( nx + 1 - blx ) / 2 * dx
304	ENDIF
305	bxl = INT ( building_wall_left / dx + 0.5 )
306	bxr = bxl + blx
307
308	IF ( building_wall_south == 9999999.9 ) THEN
309	building_wall_south = ( ny + 1 - bly ) / 2 * dy
310	ENDIF
311	bys = INT ( building_wall_south / dy + 0.5 )
312	byn = bys + bly
313
314	WRITE ( io, 271 ) building_length_x, building_length_y, &
315	building_height, bxl, bxr, bys, byn
316
317	END SELECT
318
319	!
320	!-- Boundary conditions
321	IF ( ibc_p_b == 0 ) THEN
322	runten = 'p(0) = 0 \|'
323	ELSEIF ( ibc_p_b == 1 ) THEN
324	runten = 'p(0) = p(1) \|'
325	ELSE
326	runten = 'p(0) = p(1) +R\|'
327	ENDIF
328	IF ( ibc_p_t == 0 ) THEN
329	roben = 'p(nzt+1) = 0 \|'
330	ELSE
331	roben = 'p(nzt+1) = p(nzt) \|'
332	ENDIF
333
334	IF ( ibc_uv_b == 0 ) THEN
335	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
336	ELSE
337	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
338	ENDIF
339	IF ( ibc_uv_t == 0 ) THEN
340	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
341	ELSE
342	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
343	ENDIF
344
345	IF ( ibc_pt_b == 0 ) THEN
346	runten = TRIM( runten ) // ' pt(0) = pt_surface'
347	ELSE
348	runten = TRIM( runten ) // ' pt(0) = pt(1)'
349	ENDIF
350	IF ( ibc_pt_t == 0 ) THEN
351	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
352	ELSEIF( ibc_pt_t == 1 ) THEN
353	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
354	ELSEIF( ibc_pt_t == 2 ) THEN
355	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
356	ENDIF
357
358	WRITE ( io, 300 ) runten, roben
359
360	IF ( .NOT. constant_diffusion ) THEN
361	IF ( ibc_e_b == 1 ) THEN
362	runten = 'e(0) = e(1)'
363	ELSE
364	runten = 'e(0) = e(1) = (u/0.1)*2'
365	ENDIF
366	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
367
368	WRITE ( io, 301 ) runten, roben
369
370	ENDIF
371
372	IF ( moisture .OR. passive_scalar ) THEN
373	IF ( moisture ) THEN
374	IF ( ibc_q_b == 0 ) THEN
375	runten = 'q(0) = q_surface'
376	ELSE
377	runten = 'q(0) = q(1)'
378	ENDIF
379	IF ( ibc_q_t == 0 ) THEN
380	roben = 'q(nzt) = q_top'
381	ELSE
382	roben = 'q(nzt) = q(nzt-1) + dq/dz'
383	ENDIF
384	ELSE
385	IF ( ibc_q_b == 0 ) THEN
386	runten = 's(0) = s_surface'
387	ELSE
388	runten = 's(0) = s(1)'
389	ENDIF
390	IF ( ibc_q_t == 0 ) THEN
391	roben = 's(nzt) = s_top'
392	ELSE
393	roben = 's(nzt) = s(nzt-1) + ds/dz'
394	ENDIF
395	ENDIF
396
397	WRITE ( io, 302 ) runten, roben
398
399	ENDIF
400
401	IF ( use_surface_fluxes ) THEN
402	WRITE ( io, 303 )
403	IF ( constant_heatflux ) THEN
404	WRITE ( io, 306 ) surface_heatflux
405	IF ( random_heatflux ) WRITE ( io, 307 )
406	ENDIF
407	IF ( moisture .AND. constant_waterflux ) THEN
408	WRITE ( io, 311 ) surface_waterflux
409	ENDIF
410	IF ( passive_scalar .AND. constant_waterflux ) THEN
411	WRITE ( io, 313 ) surface_waterflux
412	ENDIF
413	ENDIF
414
415	IF ( use_top_fluxes ) THEN
416	WRITE ( io, 304 )
417	IF ( constant_top_heatflux ) THEN
418	WRITE ( io, 306 ) top_heatflux
419	ENDIF
420	IF ( moisture .OR. passive_scalar ) THEN
421	WRITE ( io, 315 )
422	ENDIF
423	ENDIF
424
425	IF ( prandtl_layer ) THEN
426	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
427	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
428	IF ( moisture .AND. .NOT. constant_waterflux ) THEN
429	WRITE ( io, 312 )
430	ENDIF
431	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
432	WRITE ( io, 314 )
433	ENDIF
434	ELSE
435	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
436	WRITE ( io, 310 ) rif_min, rif_max
437	ENDIF
438	ENDIF
439
440	WRITE ( io, 317 ) bc_lr, bc_ns
441	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
442	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
443	ENDIF
444
445	!
446	!-- Listing of 1D-profiles
447	WRITE ( io, 320 ) dt_dopr_listing
448	IF ( averaging_interval_pr /= 0.0 ) THEN
449	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
450	ENDIF
451
452	!
453	!-- DATA output
454	WRITE ( io, 330 )
455	IF ( averaging_interval_pr /= 0.0 ) THEN
456	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
457	ENDIF
458
459	!
460	!-- 1D-profiles
461	dopr_chr = 'Profile:'
462	IF ( dopr_n /= 0 ) THEN
463	WRITE ( io, 331 )
464
465	output_format = ''
466	IF ( netcdf_output ) THEN
467	IF ( netcdf_64bit ) THEN
468	output_format = 'netcdf (64 bit offset)'
469	ELSE
470	output_format = 'netcdf'
471	ENDIF
472	ENDIF
473	IF ( profil_output ) THEN
474	IF ( netcdf_output ) THEN
475	output_format = TRIM( output_format ) // ' and profil'
476	ELSE
477	output_format = 'profil'
478	ENDIF
479	ENDIF
480	WRITE ( io, 345 ) output_format
481
482	DO i = 1, dopr_n
483	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
484	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
485	WRITE ( io, 332 ) dopr_chr
486	dopr_chr = ' :'
487	ENDIF
488	ENDDO
489
490	IF ( dopr_chr /= '' ) THEN
491	WRITE ( io, 332 ) dopr_chr
492	ENDIF
493	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
494	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
495	ENDIF
496
497	!
498	!-- 2D-arrays
499	DO av = 0, 1
500
501	i = 1
502	do2d_xy = ''
503	do2d_xz = ''
504	do2d_yz = ''
505	DO WHILE ( do2d(av,i) /= ' ' )
506
507	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
508	do2d_mode = do2d(av,i)(l-1:l)
509
510	SELECT CASE ( do2d_mode )
511	CASE ( 'xy' )
512	ll = LEN_TRIM( do2d_xy )
513	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
514	CASE ( 'xz' )
515	ll = LEN_TRIM( do2d_xz )
516	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
517	CASE ( 'yz' )
518	ll = LEN_TRIM( do2d_yz )
519	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
520	END SELECT
521
522	i = i + 1
523
524	ENDDO
525
526	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
527	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
528	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
529	( netcdf_output .OR. iso2d_output ) ) THEN
530
531	IF ( av == 0 ) THEN
532	WRITE ( io, 334 ) ''
533	ELSE
534	WRITE ( io, 334 ) '(time-averaged)'
535	ENDIF
536
537	IF ( do2d_at_begin ) THEN
538	begin_chr = 'and at the start'
539	ELSE
540	begin_chr = ''
541	ENDIF
542
543	output_format = ''
544	IF ( netcdf_output ) THEN
545	IF ( netcdf_64bit ) THEN
546	output_format = 'netcdf (64 bit offset)'
547	ELSE
548	output_format = 'netcdf'
549	ENDIF
550	ENDIF
551	IF ( iso2d_output ) THEN
552	IF ( netcdf_output ) THEN
553	output_format = TRIM( output_format ) // ' and iso2d'
554	ELSE
555	output_format = 'iso2d'
556	ENDIF
557	ENDIF
558	WRITE ( io, 345 ) output_format
559
560	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
561	i = 1
562	slices = '/'
563	coordinates = '/'
564	!
565	!-- Building strings with index and coordinate informations of the
566	!-- slices
567	DO WHILE ( section(i,1) /= -9999 )
568
569	WRITE (section_chr,'(I5)') section(i,1)
570	section_chr = ADJUSTL( section_chr )
571	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
572
573	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
574	coor_chr = ADJUSTL( coor_chr )
575	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
576
577	i = i + 1
578	ENDDO
579	IF ( av == 0 ) THEN
580	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
581	TRIM( begin_chr ), 'k', TRIM( slices ), &
582	TRIM( coordinates )
583	IF ( skip_time_do2d_xy /= 0.0 ) THEN
584	WRITE ( io, 339 ) skip_time_do2d_xy
585	ENDIF
586	ELSE
587	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
588	TRIM( begin_chr ), averaging_interval, &
589	dt_averaging_input, 'k', TRIM( slices ), &
590	TRIM( coordinates )
591	IF ( skip_time_data_output_av /= 0.0 ) THEN
592	WRITE ( io, 339 ) skip_time_data_output_av
593	ENDIF
594	ENDIF
595
596	ENDIF
597
598	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
599	i = 1
600	slices = '/'
601	coordinates = '/'
602	!
603	!-- Building strings with index and coordinate informations of the
604	!-- slices
605	DO WHILE ( section(i,2) /= -9999 )
606
607	WRITE (section_chr,'(I5)') section(i,2)
608	section_chr = ADJUSTL( section_chr )
609	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
610
611	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
612	coor_chr = ADJUSTL( coor_chr )
613	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
614
615	i = i + 1
616	ENDDO
617	IF ( av == 0 ) THEN
618	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
619	TRIM( begin_chr ), 'j', TRIM( slices ), &
620	TRIM( coordinates )
621	IF ( skip_time_do2d_xz /= 0.0 ) THEN
622	WRITE ( io, 339 ) skip_time_do2d_xz
623	ENDIF
624	ELSE
625	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
626	TRIM( begin_chr ), averaging_interval, &
627	dt_averaging_input, 'j', TRIM( slices ), &
628	TRIM( coordinates )
629	IF ( skip_time_data_output_av /= 0.0 ) THEN
630	WRITE ( io, 339 ) skip_time_data_output_av
631	ENDIF
632	ENDIF
633	ENDIF
634
635	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
636	i = 1
637	slices = '/'
638	coordinates = '/'
639	!
640	!-- Building strings with index and coordinate informations of the
641	!-- slices
642	DO WHILE ( section(i,3) /= -9999 )
643
644	WRITE (section_chr,'(I5)') section(i,3)
645	section_chr = ADJUSTL( section_chr )
646	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
647
648	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
649	coor_chr = ADJUSTL( coor_chr )
650	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
651
652	i = i + 1
653	ENDDO
654	IF ( av == 0 ) THEN
655	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
656	TRIM( begin_chr ), 'i', TRIM( slices ), &
657	TRIM( coordinates )
658	IF ( skip_time_do2d_yz /= 0.0 ) THEN
659	WRITE ( io, 339 ) skip_time_do2d_yz
660	ENDIF
661	ELSE
662	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
663	TRIM( begin_chr ), averaging_interval, &
664	dt_averaging_input, 'i', TRIM( slices ), &
665	TRIM( coordinates )
666	IF ( skip_time_data_output_av /= 0.0 ) THEN
667	WRITE ( io, 339 ) skip_time_data_output_av
668	ENDIF
669	ENDIF
670	ENDIF
671
672	ENDIF
673
674	ENDDO
675
676	!
677	!-- 3d-arrays
678	DO av = 0, 1
679
680	i = 1
681	do3d_chr = ''
682	DO WHILE ( do3d(av,i) /= ' ' )
683
684	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
685	i = i + 1
686
687	ENDDO
688
689	IF ( do3d_chr /= '' ) THEN
690	IF ( av == 0 ) THEN
691	WRITE ( io, 336 ) ''
692	ELSE
693	WRITE ( io, 336 ) '(time-averaged)'
694	ENDIF
695
696	output_format = ''
697	IF ( netcdf_output ) THEN
698	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
699	output_format = 'netcdf (64 bit offset)'
700	ELSE
701	output_format = 'netcdf'
702	ENDIF
703	ENDIF
704	IF ( avs_output ) THEN
705	IF ( netcdf_output ) THEN
706	output_format = TRIM( output_format ) // ' and avs'
707	ELSE
708	output_format = 'avs'
709	ENDIF
710	ENDIF
711	WRITE ( io, 345 ) output_format
712
713	IF ( do3d_at_begin ) THEN
714	begin_chr = 'and at the start'
715	ELSE
716	begin_chr = ''
717	ENDIF
718	IF ( av == 0 ) THEN
719	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
720	zu(nz_do3d), nz_do3d
721	ELSE
722	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
723	TRIM( begin_chr ), averaging_interval, &
724	dt_averaging_input, zu(nz_do3d), nz_do3d
725	ENDIF
726
727	IF ( do3d_compress ) THEN
728	do3d_chr = ''
729	i = 1
730	DO WHILE ( do3d(av,i) /= ' ' )
731
732	SELECT CASE ( do3d(av,i) )
733	CASE ( 'u' )
734	j = 1
735	CASE ( 'v' )
736	j = 2
737	CASE ( 'w' )
738	j = 3
739	CASE ( 'p' )
740	j = 4
741	CASE ( 'pt' )
742	j = 5
743	END SELECT
744	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
745	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
746	':' // prec // ','
747	i = i + 1
748
749	ENDDO
750	WRITE ( io, 338 ) do3d_chr
751
752	ENDIF
753
754	IF ( av == 0 ) THEN
755	IF ( skip_time_do3d /= 0.0 ) THEN
756	WRITE ( io, 339 ) skip_time_do3d
757	ENDIF
758	ELSE
759	IF ( skip_time_data_output_av /= 0.0 ) THEN
760	WRITE ( io, 339 ) skip_time_data_output_av
761	ENDIF
762	ENDIF
763
764	ENDIF
765
766	ENDDO
767
768	!
769	!-- Timeseries
770	IF ( dt_dots /= 9999999.9 ) THEN
771	WRITE ( io, 340 )
772
773	output_format = ''
774	IF ( netcdf_output ) THEN
775	IF ( netcdf_64bit ) THEN
776	output_format = 'netcdf (64 bit offset)'
777	ELSE
778	output_format = 'netcdf'
779	ENDIF
780	ENDIF
781	IF ( profil_output ) THEN
782	IF ( netcdf_output ) THEN
783	output_format = TRIM( output_format ) // ' and profil'
784	ELSE
785	output_format = 'profil'
786	ENDIF
787	ENDIF
788	WRITE ( io, 345 ) output_format
789	WRITE ( io, 341 ) dt_dots
790	ENDIF
791
792	#if defined( __dvrp_graphics )
793	!
794	!-- Dvrp-output
795	IF ( dt_dvrp /= 9999999.9 ) THEN
796	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
797	TRIM( dvrp_username ), TRIM( dvrp_directory )
798	i = 1
799	l = 0
800	DO WHILE ( mode_dvrp(i) /= ' ' )
801	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
802	READ ( mode_dvrp(i), '(10X,I1)' ) j
803	l = l + 1
804	IF ( do3d(0,j) /= ' ' ) THEN
805	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
806	ENDIF
807	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
808	READ ( mode_dvrp(i), '(6X,I1)' ) j
809	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
810	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
811	WRITE ( io, 363 )
812	ENDIF
813	i = i + 1
814	ENDDO
815	ENDIF
816	#endif
817
818	#if defined( __spectra )
819	!
820	!-- Spectra output
821	IF ( dt_dosp /= 9999999.9 ) THEN
822	WRITE ( io, 370 )
823
824	output_format = ''
825	IF ( netcdf_output ) THEN
826	IF ( netcdf_64bit ) THEN
827	output_format = 'netcdf (64 bit offset)'
828	ELSE
829	output_format = 'netcdf'
830	ENDIF
831	ENDIF
832	IF ( profil_output ) THEN
833	IF ( netcdf_output ) THEN
834	output_format = TRIM( output_format ) // ' and profil'
835	ELSE
836	output_format = 'profil'
837	ENDIF
838	ENDIF
839	WRITE ( io, 345 ) output_format
840	WRITE ( io, 371 ) dt_dosp
841	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
842	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
843	( spectra_direction(i), i = 1,10 ), &
844	( comp_spectra_level(i), i = 1,10 ), &
845	( plot_spectra_level(i), i = 1,10 ), &
846	averaging_interval_sp, dt_averaging_input_pr
847	ENDIF
848	#endif
849
850	WRITE ( io, 99 )
851
852	!
853	!-- Physical quantities
854	WRITE ( io, 400 )
855
856	!
857	!-- Geostrophic parameters
858	WRITE ( io, 410 ) omega, phi, f, fs
859
860	!
861	!-- Other quantities
862	WRITE ( io, 411 ) g
863	IF ( use_pt_reference ) WRITE ( io, 412 ) pt_reference
864
865	!
866	!-- Cloud physics parameters
867	IF ( cloud_physics ) THEN
868	WRITE ( io, 415 )
869	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
870	ENDIF
871
872	!-- Profile of the geostrophic wind (component ug)
873	!-- Building output strings
874	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
875	gradients = '------'
876	slices = ' 0'
877	coordinates = ' 0.0'
878	i = 1
879	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
880
881	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
882	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
883
884	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
885	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
886
887	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
888	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
889
890	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
891	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
892
893	i = i + 1
894	ENDDO
895
896	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
897	TRIM( gradients ), TRIM( slices )
898
899	!-- Profile of the geostrophic wind (component vg)
900	!-- Building output strings
901	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
902	gradients = '------'
903	slices = ' 0'
904	coordinates = ' 0.0'
905	i = 1
906	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
907
908	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
909	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
910
911	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
912	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
913
914	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
915	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
916
917	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
918	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
919
920	i = i + 1
921	ENDDO
922
923	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
924	TRIM( gradients ), TRIM( slices )
925
926	!
927	!-- Initial temperature profile
928	!-- Building output strings, starting with surface temperature
929	WRITE ( temperatures, '(F6.2)' ) pt_surface
930	gradients = '------'
931	slices = ' 0'
932	coordinates = ' 0.0'
933	i = 1
934	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
935
936	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
937	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
938
939	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
940	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
941
942	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
943	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
944
945	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
946	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
947
948	i = i + 1
949	ENDDO
950
951	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
952	TRIM( gradients ), TRIM( slices )
953
954	!
955	!-- Initial humidity profile
956	!-- Building output strings, starting with surface humidity
957	IF ( moisture .OR. passive_scalar ) THEN
958	WRITE ( temperatures, '(E8.1)' ) q_surface
959	gradients = '--------'
960	slices = ' 0'
961	coordinates = ' 0.0'
962	i = 1
963	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
964
965	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
966	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
967
968	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
969	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
970
971	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
972	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
973
974	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
975	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
976
977	i = i + 1
978	ENDDO
979
980	IF ( moisture ) THEN
981	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
982	TRIM( gradients ), TRIM( slices )
983	ELSE
984	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
985	TRIM( gradients ), TRIM( slices )
986	ENDIF
987	ENDIF
988
989	!
990	!-- LES / turbulence parameters
991	WRITE ( io, 450 )
992
993	!--
994	! ... LES-constants used must still be added here
995	!--
996	IF ( constant_diffusion ) THEN
997	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
998	prandtl_number
999	ENDIF
1000	IF ( .NOT. constant_diffusion) THEN
1001	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1002	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1003	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1004	ENDIF
1005
1006	!
1007	!-- Special actions during the run
1008	WRITE ( io, 470 )
1009	IF ( create_disturbances ) THEN
1010	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1011	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1012	zu(disturbance_level_ind_t), disturbance_level_ind_t
1013	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1014	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1015	ELSE
1016	WRITE ( io, 473 ) disturbance_energy_limit
1017	ENDIF
1018	WRITE ( io, 474 ) TRIM( random_generator )
1019	ENDIF
1020	IF ( pt_surface_initial_change /= 0.0 ) THEN
1021	WRITE ( io, 475 ) pt_surface_initial_change
1022	ENDIF
1023	IF ( moisture .AND. q_surface_initial_change /= 0.0 ) THEN
1024	WRITE ( io, 476 ) q_surface_initial_change
1025	ENDIF
1026	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1027	WRITE ( io, 477 ) q_surface_initial_change
1028	ENDIF
1029
1030	IF ( particle_advection ) THEN
1031	!
1032	!-- Particle attributes
1033	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1034	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1035	end_time_prel
1036	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1037	IF ( random_start_position ) WRITE ( io, 481 )
1038	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1039	WRITE ( io, 495 ) total_number_of_particles
1040	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1041	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1042	WRITE ( io, 483 ) maximum_number_of_tailpoints
1043	IF ( minimum_tailpoint_distance /= 0 ) THEN
1044	WRITE ( io, 484 ) total_number_of_tails, &
1045	minimum_tailpoint_distance, &
1046	maximum_tailpoint_age
1047	ENDIF
1048	ENDIF
1049	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1050	WRITE ( io, 485 ) dt_write_particle_data
1051	output_format = ''
1052	IF ( netcdf_output ) THEN
1053	IF ( netcdf_64bit ) THEN
1054	output_format = 'netcdf (64 bit offset) and binary'
1055	ELSE
1056	output_format = 'netcdf and binary'
1057	ENDIF
1058	ELSE
1059	output_format = 'binary'
1060	ENDIF
1061	WRITE ( io, 345 ) output_format
1062	ENDIF
1063	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1064	IF ( write_particle_statistics ) WRITE ( io, 486 )
1065
1066	WRITE ( io, 487 ) number_of_particle_groups
1067
1068	DO i = 1, number_of_particle_groups
1069	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1070	WRITE ( io, 490 ) i, 0.0
1071	WRITE ( io, 492 )
1072	ELSE
1073	WRITE ( io, 490 ) i, radius(i)
1074	IF ( density_ratio(i) /= 0.0 ) THEN
1075	WRITE ( io, 491 ) density_ratio(i)
1076	ELSE
1077	WRITE ( io, 492 )
1078	ENDIF
1079	ENDIF
1080	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1081	pdx(i), pdy(i), pdz(i)
1082	ENDDO
1083
1084	ENDIF
1085
1086
1087	!
1088	!-- Parameters of 1D-model
1089	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1090	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1091	mixing_length_1d, dissipation_1d
1092	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1093	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1094	ENDIF
1095	ENDIF
1096
1097	!
1098	!-- User-defined informations
1099	CALL user_header( io )
1100
1101	WRITE ( io, 99 )
1102
1103	#if defined( __ibm )
1104	!
1105	!-- Write buffer contents to disc immediately
1106	CALL FLUSH_( io )
1107	#elif defined( __lcmuk ) \|\| defined( __nec )
1108	CALL FLUSH( io )
1109	#endif
1110
1111	!
1112	!-- Here the FORMATs start
1113
1114	99 FORMAT (1X,78('-'))
1115	100 FORMAT (/10X,'****************',11X,28('-')/ &
1116	10X,'* ',A12,'*',11X,A/ &
1117	10X,'****************',11X,28('-')// &
1118	' Date: ',A8,11X,'Run: ',A20/ &
1119	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1120	' Run on host: ',A10)
1121	#if defined( __parallel )
1122	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1123	')',1X,A)
1124	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1125	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1126	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1127	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1128	37X,'because the job is running on an SMP-cluster')
1129	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1130	#endif
1131	110 FORMAT (/' Numerical Schemes:'/ &
1132	' -----------------'/)
1133	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1134	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1135	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1136	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1137	' or Upstream')
1138	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1139	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1140	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1141	' or Upstream')
1142	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1143	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1144	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1145	' Translation velocity = ',A/ &
1146	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1147	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1148	' of timestep changes)')
1149	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1150	' timestep changes')
1151	122 FORMAT (' --> Time differencing scheme: ',A)
1152	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
1153	' maximum damping coefficient: ',F5.3, ' 1/s')
1154	124 FORMAT (' Spline-overshoots are being suppressed')
1155	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1156	' of'/ &
1157	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1158	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1159	' of'/ &
1160	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1161	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1162	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1163	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1164	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1165	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1166	130 FORMAT (' --> Additional prognostic equation for the total water content')
1167	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1168	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1169	' effective emissivity scheme')
1170	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1171	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1172	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1173	A,'-cycle)'/ &
1174	' number of grid levels: ',I2/ &
1175	' Gauss-Seidel red/black iterations: ',I2)
1176	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1177	I3,')')
1178	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1179	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1180	I3,')'/ &
1181	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1182	I3,')')
1183	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1184	139 FORMAT (' --> Prognostic equations are solved in one single loop (fast', &
1185	' method)')
1186	140 FORMAT (' maximum residual allowed: ',E10.3)
1187	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1188	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1189	'step')
1190	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1191	'conserved')
1192	200 FORMAT (//' Run time and time step information:'/ &
1193	' ----------------------------------'/)
1194	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1195	' CFL-factor: ',F4.2)
1196	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1197	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1198	' End time: ',F9.3,' s')
1199	204 FORMAT ( A,F9.3,' s')
1200	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1201	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1202	' CPU-time used: ',F9.3,' s per timestep: ', &
1203	' ',F9.3,' s'/ &
1204	' per second of simulated tim', &
1205	'e: ',F9.3,' s')
1206	250 FORMAT (//' Computational grid and domain size:'/ &
1207	' ----------------------------------'// &
1208	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1209	' m dz = ',F7.3,' m'/ &
1210	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1211	' m z(u) = ',F10.3,' m'/)
1212	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1213	' factor: ',F5.3/ &
1214	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1215	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1216	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1217	255 FORMAT (' Subdomains have equal size')
1218	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1219	'have smaller sizes'/ &
1220	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1221	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1222	' degrees')
1223	270 FORMAT (//' Topography informations:'/ &
1224	' -----------------------'// &
1225	1X,'Topography: ',A)
1226	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1227	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1228	' / ',I4)
1229	300 FORMAT (//' Boundary conditions:'/ &
1230	' -------------------'// &
1231	' p uv ', &
1232	' pt'// &
1233	' B. bound.: ',A/ &
1234	' T. bound.: ',A)
1235	301 FORMAT (/' e'// &
1236	' B. bound.: ',A/ &
1237	' T. bound.: ',A)
1238	302 FORMAT (/' q'// &
1239	' B. bound.: ',A/ &
1240	' T. bound.: ',A)
1241	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1242	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1243	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1244	'computational u,v-level:'// &
1245	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1246	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1247	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
1248	307 FORMAT (' Heatflux has a random normal distribution')
1249	308 FORMAT (' Predefined surface temperature')
1250	310 FORMAT (//' 1D-Model:'// &
1251	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1252	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1253	312 FORMAT (' Predefined surface humidity')
1254	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1255	314 FORMAT (' Predefined scalar value at the surface')
1256	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1257	317 FORMAT (//' Lateral boundaries:'/ &
1258	' left/right: ',A/ &
1259	' north/south: ',A)
1260	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1261	'max =',F5.1,' m**2/s')
1262	320 FORMAT (//' List output:'/ &
1263	' -----------'// &
1264	' 1D-Profiles:'/ &
1265	' Output every ',F8.2,' s')
1266	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1267	' Averaging input every ',F8.2,' s')
1268	330 FORMAT (//' Data output:'/ &
1269	' -----------'/)
1270	331 FORMAT (/' 1D-Profiles:')
1271	332 FORMAT (/' ',A)
1272	333 FORMAT (' Output every ',F8.2,' s',/ &
1273	' Time averaged over ',F8.2,' s'/ &
1274	' Averaging input every ',F8.2,' s')
1275	334 FORMAT (/' 2D-Arrays',A,':')
1276	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1277	' Output every ',F8.2,' s ',A/ &
1278	' Cross sections at ',A1,' = ',A/ &
1279	' scalar-coordinates: ',A,' m'/)
1280	336 FORMAT (/' 3D-Arrays',A,':')
1281	337 FORMAT (/' Arrays: ',A/ &
1282	' Output every ',F8.2,' s ',A/ &
1283	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1284	338 FORMAT (' Compressed data output'/ &
1285	' Decimal precision: ',A/)
1286	339 FORMAT (' No output during initial ',F8.2,' s')
1287	340 FORMAT (/' Time series:')
1288	341 FORMAT (' Output every ',F8.2,' s'/)
1289	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1290	' Output every ',F8.2,' s ',A/ &
1291	' Time averaged over ',F8.2,' s'/ &
1292	' Averaging input every ',F8.2,' s'/ &
1293	' Cross sections at ',A1,' = ',A/ &
1294	' scalar-coordinates: ',A,' m'/)
1295	343 FORMAT (/' Arrays: ',A/ &
1296	' Output every ',F8.2,' s ',A/ &
1297	' Time averaged over ',F8.2,' s'/ &
1298	' Averaging input every ',F8.2,' s'/ &
1299	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1300	345 FORMAT (' Output format: ',A/)
1301	#if defined( __dvrp_graphics )
1302	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1303	' Output every ',F7.1,' s'/ &
1304	' Output mode: ',A/ &
1305	' Host / User: ',A,' / ',A/ &
1306	' Directory: ',A// &
1307	' The sequence contains:')
1308	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1309	362 FORMAT (' Sectional plane ',A)
1310	363 FORMAT (' Particles')
1311	#endif
1312	#if defined( __spectra )
1313	370 FORMAT (' Spectra:')
1314	371 FORMAT (' Output every ',F7.1,' s'/)
1315	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1316	' Directions: ', 10(A5,',')/ &
1317	' height levels k = ', 9(I3,','),I3,'.'/ &
1318	' height levels selected for standard plot:'/ &
1319	' k = ', 9(I3,','),I3,'.'/ &
1320	' Time averaged over ', F7.1, ' s,' / &
1321	' Profiles for the time averaging are taken every ', &
1322	F6.1,' s')
1323	#endif
1324	400 FORMAT (//' Physical quantities:'/ &
1325	' -------------------'/)
1326	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1327	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1328	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1329	' f* = ',F9.6,' 1/s')
1330	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1331	412 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1332	415 FORMAT (/' Cloud physics parameters:'/ &
1333	' ------------------------'/)
1334	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1335	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1336	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1337	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1338	' Vapourization heat : L_v = ',E8.2,' J/kg')
1339	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1340	' Height: ',A,' m'/ &
1341	' Temperature: ',A,' K'/ &
1342	' Gradient: ',A,' K/100m'/ &
1343	' Gridpoint: ',A)
1344	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1345	' Height: ',A,' m'/ &
1346	' Humidity: ',A,' kg/kg'/ &
1347	' Gradient: ',A,' (kg/kg)/100m'/ &
1348	' Gridpoint: ',A)
1349	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1350	' Height: ',A,' m'/ &
1351	' Scalar concentration: ',A,' kg/m**3'/ &
1352	' Gradient: ',A,' (kg/m**3)/100m'/ &
1353	' Gridpoint: ',A)
1354	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1355	' Height: ',A,' m'/ &
1356	' ug: ',A,' m/s'/ &
1357	' Gradient: ',A,' 1/100s'/ &
1358	' Gridpoint: ',A)
1359	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1360	' Height: ',A,' m'/ &
1361	' vg: ',A,' m/S'/ &
1362	' Gradient: ',A,' 1/100s'/ &
1363	' Gridpoint: ',A)
1364	450 FORMAT (//' LES / Turbulence quantities:'/ &
1365	' ---------------------------'/)
1366	451 FORMAT (' Diffusion coefficients are constant:'/ &
1367	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1368	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1369	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1370	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1371	470 FORMAT (//' Actions during the simulation:'/ &
1372	' -----------------------------'/)
1373	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1374	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1375	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
1376	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
1377	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1378	' to i/j =',I4)
1379	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1380	1X,F5.3, ' m2/s2')
1381	474 FORMAT (' Random number generator used : ',A/)
1382	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1383	'respectively, if'/ &
1384	' the value is negative) by ',F5.2,' K at the beginning of the',&
1385	' 3D-simulation'/)
1386	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1387	'respectively, if the'/ &
1388	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1389	' the 3D-simulation'/)
1390	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1391	'respectively, if the'/ &
1392	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1393	' the 3D-simulation'/)
1394	480 FORMAT (' Particles:'/ &
1395	' ---------'// &
1396	' Particle advection is active (switched on at t = ', F7.1, &
1397	' s)'/ &
1398	' Start of new particle generations every ',F6.1,' s'/ &
1399	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1400	' bottom: ', A, ' top: ', A/&
1401	' Maximum particle age: ',F9.1,' s'/ &
1402	' Advection stopped at t = ',F9.1,' s'/)
1403	481 FORMAT (' Particles have random start positions'/)
1404	482 FORMAT (' Particles are advected only horizontally'/)
1405	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1406	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1407	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1408	' Maximum age of the end of the tail: ',F8.2,' s')
1409	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1410	486 FORMAT (' Particle statistics are written on file'/)
1411	487 FORMAT (' Number of particle groups: ',I2/)
1412	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1413	' minimum timestep for advection: ', F7.5/)
1414	489 FORMAT (' Number of particles simultaneously released at each ', &
1415	'point: ', I5/)
1416	490 FORMAT (' Particle group ',I2,':'/ &
1417	' Particle radius: ',E10.3, 'm')
1418	491 FORMAT (' Particle inertia is activated'/ &
1419	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1420	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1421	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1422	' y:',F8.1,' - ',F8.1,' m'/&
1423	' z:',F8.1,' - ',F8.1,' m'/&
1424	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1425	' m dz = ',F8.1,' m'/)
1426	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1427	F8.2,' s'/)
1428	495 FORMAT (' Number of particles in total domain: ',I10/)
1429	500 FORMAT (//' 1D-Model parameters:'/ &
1430	' -------------------'// &
1431	' Simulation time: ',F8.1,' s'/ &
1432	' Run-controll output every: ',F8.1,' s'/ &
1433	' Vertical profile output every: ',F8.1,' s'/ &
1434	' Mixing length calculation: ',A/ &
1435	' Dissipation calculation: ',A/)
1436	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1437
1438
1439	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |