Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 449

Last change on this file since 449 was 449, checked in by raasch, 15 years ago
branch revision comments from Marcus (rev 410) replaced by normal revision comments
Property svn:keywords set to `Id`
File size: 75.7 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! +large scale vertical motion (subsidence/ascent)
7	! Bugfix: index problem concerning gradient_level indices removed
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: header.f90 449 2010-02-02 11:23:59Z raasch $
12	!
13	! 410 2009-12-04 17:05:40Z letzel
14	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
15	! mask_scale\|_x\|y\|z, masks, netcdf_format_mask[_av], skip_time_domask
16	!
17	! 346 2009-07-06 10:13:41Z raasch
18	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
19	! Coupling with independent precursor runs.
20	! Output of messages replaced by message handling routine.
21	! Output of several additional dvr parameters
22	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
23	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
24	! dp_smooth, dpdxy, u_bulk, v_bulk
25	! topography_grid_convention moved from user_header
26	! small bugfix concerning 3d 64bit netcdf output format
27	!
28	! 206 2008-10-13 14:59:11Z raasch
29	! Bugfix: error in zu index in case of section_xy = -1
30	!
31	! 198 2008-09-17 08:55:28Z raasch
32	! Format adjustments allowing output of larger revision numbers
33	!
34	! 197 2008-09-16 15:29:03Z raasch
35	! allow 100 spectra levels instead of 10 for consistency with
36	! define_netcdf_header,
37	! bugfix in the output of the characteristic levels of potential temperature,
38	! geostrophic wind, scalar concentration, humidity and leaf area density,
39	! output of turbulence recycling informations
40	!
41	! 138 2007-11-28 10:03:58Z letzel
42	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
43	! Allow two instead of one digit to specify isosurface and slicer variables.
44	! Output of sorting frequency of particles
45	!
46	! 108 2007-08-24 15:10:38Z letzel
47	! Output of informations for coupled model runs (boundary conditions etc.)
48	! + output of momentumfluxes at the top boundary
49	! Rayleigh damping for ocean, e_init
50	!
51	! 97 2007-06-21 08:23:15Z raasch
52	! Adjustments for the ocean version.
53	! use_pt_reference renamed use_reference
54	!
55	! 87 2007-05-22 15:46:47Z raasch
56	! Bugfix: output of use_upstream_for_tke
57	!
58	! 82 2007-04-16 15:40:52Z raasch
59	! Preprocessor strings for different linux clusters changed to "lc",
60	! routine local_flush is used for buffer flushing
61	!
62	! 76 2007-03-29 00:58:32Z raasch
63	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
64	! output of the loop optimization method, moisture renamed humidity,
65	! output of subversion revision number
66	!
67	! 19 2007-02-23 04:53:48Z raasch
68	! Output of scalar flux applied at top boundary
69	!
70	! RCS Log replace by Id keyword, revision history cleaned up
71	!
72	! Revision 1.63 2006/08/22 13:53:13 raasch
73	! Output of dz_max
74	!
75	! Revision 1.1 1997/08/11 06:17:20 raasch
76	! Initial revision
77	!
78	!
79	! Description:
80	! ------------
81	! Writing a header with all important informations about the actual run.
82	! This subroutine is called three times, two times at the beginning
83	! (writing information on files RUN_CONTROL and HEADER) and one time at the
84	! end of the run, then writing additional information about CPU-usage on file
85	! header.
86	!-----------------------------------------------------------------------------!
87
88	USE arrays_3d
89	USE control_parameters
90	USE cloud_parameters
91	USE cpulog
92	USE dvrp_variables
93	USE grid_variables
94	USE indices
95	USE model_1d
96	USE particle_attributes
97	USE pegrid
98	USE subsidence_mod
99	USE spectrum
100
101	IMPLICIT NONE
102
103	CHARACTER (LEN=1) :: prec
104	CHARACTER (LEN=2) :: do2d_mode
105	CHARACTER (LEN=5) :: section_chr
106	CHARACTER (LEN=9) :: time_to_string
107	CHARACTER (LEN=10) :: coor_chr, host_chr
108	CHARACTER (LEN=16) :: begin_chr
109	CHARACTER (LEN=23) :: ver_rev
110	CHARACTER (LEN=40) :: output_format
111	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
112	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
113	domask_chr, run_classification
114	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
115	temperatures, ugcomponent, vgcomponent
116	CHARACTER (LEN=85) :: roben, runten
117
118	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
119
120	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
121	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
122	REAL :: cpuseconds_per_simulated_second
123
124	!
125	!-- Open the output file. At the end of the simulation, output is directed
126	!-- to unit 19.
127	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
128	.NOT. simulated_time_at_begin /= simulated_time ) THEN
129	io = 15 ! header output on file RUN_CONTROL
130	ELSE
131	io = 19 ! header output on file HEADER
132	ENDIF
133	CALL check_open( io )
134
135	!
136	!-- At the end of the run, output file (HEADER) will be rewritten with
137	!-- new informations
138	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
139
140	!
141	!-- Determine kind of model run
142	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
143	run_classification = '3D - restart run'
144	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
145	run_classification = '3D - run with cyclic fill of 3D - prerun data'
146	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
147	run_classification = '3D - run without 1D - prerun'
148	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
149	run_classification = '3D - run with 1D - prerun'
150	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
151	run_classification = '3D - run initialized by user'
152	ELSE
153	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
154	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
155	ENDIF
156	IF ( ocean ) THEN
157	run_classification = 'ocean - ' // run_classification
158	ELSE
159	run_classification = 'atmosphere - ' // run_classification
160	ENDIF
161
162	!
163	!-- Run-identification, date, time, host
164	host_chr = host(1:10)
165	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
166	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
167	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
168	#if defined( __mpi2 )
169	mpi_type = 2
170	#else
171	mpi_type = 1
172	#endif
173	WRITE ( io, 101 ) mpi_type, coupling_mode
174	ENDIF
175	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
176	ADJUSTR( host_chr )
177	#if defined( __parallel )
178	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
179	char1 = 'calculated'
180	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
181	host(1:2) == 'lc' ) .AND. &
182	npex == -1 .AND. pdims(2) == 1 ) THEN
183	char1 = 'forced'
184	ELSE
185	char1 = 'predefined'
186	ENDIF
187	IF ( threads_per_task == 1 ) THEN
188	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
189	ELSE
190	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
191	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
192	ENDIF
193	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
194	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
195	npex == -1 .AND. pdims(2) == 1 ) &
196	THEN
197	WRITE ( io, 106 )
198	ELSEIF ( pdims(2) == 1 ) THEN
199	WRITE ( io, 107 ) 'x'
200	ELSEIF ( pdims(1) == 1 ) THEN
201	WRITE ( io, 107 ) 'y'
202	ENDIF
203	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
204	#endif
205	WRITE ( io, 99 )
206
207	!
208	!-- Numerical schemes
209	WRITE ( io, 110 )
210	IF ( psolver(1:7) == 'poisfft' ) THEN
211	WRITE ( io, 111 ) TRIM( fft_method )
212	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
213	ELSEIF ( psolver == 'sor' ) THEN
214	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
215	ELSEIF ( psolver == 'multigrid' ) THEN
216	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
217	IF ( mg_cycles == -1 ) THEN
218	WRITE ( io, 140 ) residual_limit
219	ELSE
220	WRITE ( io, 141 ) mg_cycles
221	ENDIF
222	IF ( mg_switch_to_pe0_level == 0 ) THEN
223	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
224	nzt_mg(1)
225	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
226	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
227	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
228	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
229	nzt_mg(mg_switch_to_pe0_level), &
230	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
231	nzt_mg(1)
232	ENDIF
233	ENDIF
234	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
235	THEN
236	WRITE ( io, 142 )
237	ENDIF
238
239	IF ( momentum_advec == 'pw-scheme' ) THEN
240	WRITE ( io, 113 )
241	ELSE
242	WRITE ( io, 114 )
243	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
244	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
245	overshoot_limit_w /= 0.0 ) THEN
246	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
247	overshoot_limit_w
248	ENDIF
249	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
250	ups_limit_w /= 0.0 ) &
251	THEN
252	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
253	ENDIF
254	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
255	ENDIF
256	IF ( scalar_advec == 'pw-scheme' ) THEN
257	WRITE ( io, 116 )
258	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
259	WRITE ( io, 117 )
260	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
261	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
262	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
263	ENDIF
264	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
265	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
266	ENDIF
267	ELSE
268	WRITE ( io, 118 )
269	ENDIF
270
271	WRITE ( io, 139 ) TRIM( loop_optimization )
272
273	IF ( galilei_transformation ) THEN
274	IF ( use_ug_for_galilei_tr ) THEN
275	char1 = 'geostrophic wind'
276	ELSE
277	char1 = 'mean wind in model domain'
278	ENDIF
279	IF ( simulated_time_at_begin == simulated_time ) THEN
280	char2 = 'at the start of the run'
281	ELSE
282	char2 = 'at the end of the run'
283	ENDIF
284	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
285	advected_distance_x/1000.0, advected_distance_y/1000.0
286	ENDIF
287	IF ( timestep_scheme == 'leapfrog' ) THEN
288	WRITE ( io, 120 )
289	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
290	WRITE ( io, 121 )
291	ELSE
292	WRITE ( io, 122 ) timestep_scheme
293	ENDIF
294	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
295	IF ( rayleigh_damping_factor /= 0.0 ) THEN
296	IF ( .NOT. ocean ) THEN
297	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
298	rayleigh_damping_factor
299	ELSE
300	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
301	rayleigh_damping_factor
302	ENDIF
303	ENDIF
304	IF ( humidity ) THEN
305	IF ( .NOT. cloud_physics ) THEN
306	WRITE ( io, 129 )
307	ELSE
308	WRITE ( io, 130 )
309	WRITE ( io, 131 )
310	IF ( radiation ) WRITE ( io, 132 )
311	IF ( precipitation ) WRITE ( io, 133 )
312	ENDIF
313	ENDIF
314	IF ( passive_scalar ) WRITE ( io, 134 )
315	IF ( conserve_volume_flow ) THEN
316	WRITE ( io, 150 ) conserve_volume_flow_mode
317	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
318	WRITE ( io, 151 ) u_bulk, v_bulk
319	ENDIF
320	ELSEIF ( dp_external ) THEN
321	IF ( dp_smooth ) THEN
322	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
323	ELSE
324	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
325	ENDIF
326	ENDIF
327	IF ( large_scale_subsidence ) THEN
328	WRITE ( io, 153 )
329	WRITE ( io, 154 )
330	ENDIF
331	WRITE ( io, 99 )
332
333	!
334	!-- Runtime and timestep informations
335	WRITE ( io, 200 )
336	IF ( .NOT. dt_fixed ) THEN
337	WRITE ( io, 201 ) dt_max, cfl_factor
338	ELSE
339	WRITE ( io, 202 ) dt
340	ENDIF
341	WRITE ( io, 203 ) simulated_time_at_begin, end_time
342
343	IF ( time_restart /= 9999999.9 .AND. &
344	simulated_time_at_begin == simulated_time ) THEN
345	IF ( dt_restart == 9999999.9 ) THEN
346	WRITE ( io, 204 ) ' Restart at: ',time_restart
347	ELSE
348	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
349	ENDIF
350	ENDIF
351
352	IF ( simulated_time_at_begin /= simulated_time ) THEN
353	i = MAX ( log_point_s(10)%counts, 1 )
354	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
355	cpuseconds_per_simulated_second = 0.0
356	ELSE
357	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
358	( simulated_time - &
359	simulated_time_at_begin )
360	ENDIF
361	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
362	log_point_s(10)%sum / REAL( i ), &
363	cpuseconds_per_simulated_second
364	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
365	IF ( dt_restart == 9999999.9 ) THEN
366	WRITE ( io, 204 ) ' Next restart at: ',time_restart
367	ELSE
368	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
369	ENDIF
370	ENDIF
371	ENDIF
372
373	!
374	!-- Start time for coupled runs, if independent precursor runs for atmosphere
375	!-- and ocean are used. In this case, coupling_start_time defines the time
376	!-- when the coupling is switched on.
377	IF ( coupling_start_time /= 0.0 ) THEN
378	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
379	char1 = 'Precursor run for a coupled atmosphere-ocean run'
380	ELSE
381	char1 = 'Coupled atmosphere-ocean run following independent ' // &
382	'precursor runs'
383	ENDIF
384	WRITE ( io, 207 ) char1, coupling_start_time
385	ENDIF
386
387	!
388	!-- Computational grid
389	IF ( .NOT. ocean ) THEN
390	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
391	IF ( dz_stretch_level_index < nzt+1 ) THEN
392	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
393	dz_stretch_factor, dz_max
394	ENDIF
395	ELSE
396	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
397	IF ( dz_stretch_level_index > 0 ) THEN
398	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
399	dz_stretch_factor, dz_max
400	ENDIF
401	ENDIF
402	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
403	MIN( nnz+2, nzt+2 )
404	IF ( numprocs > 1 ) THEN
405	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
406	WRITE ( io, 255 )
407	ELSE
408	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
409	ENDIF
410	ENDIF
411	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
412
413	!
414	!-- Topography
415	WRITE ( io, 270 ) topography
416	SELECT CASE ( TRIM( topography ) )
417
418	CASE ( 'flat' )
419	! no actions necessary
420
421	CASE ( 'single_building' )
422	blx = INT( building_length_x / dx )
423	bly = INT( building_length_y / dy )
424	bh = INT( building_height / dz )
425
426	IF ( building_wall_left == 9999999.9 ) THEN
427	building_wall_left = ( nx + 1 - blx ) / 2 * dx
428	ENDIF
429	bxl = INT ( building_wall_left / dx + 0.5 )
430	bxr = bxl + blx
431
432	IF ( building_wall_south == 9999999.9 ) THEN
433	building_wall_south = ( ny + 1 - bly ) / 2 * dy
434	ENDIF
435	bys = INT ( building_wall_south / dy + 0.5 )
436	byn = bys + bly
437
438	WRITE ( io, 271 ) building_length_x, building_length_y, &
439	building_height, bxl, bxr, bys, byn
440
441	CASE ( 'single_street_canyon' )
442	ch = NINT( canyon_height / dz )
443	IF ( canyon_width_x /= 9999999.9 ) THEN
444	!
445	!-- Street canyon in y direction
446	cwx = NINT( canyon_width_x / dx )
447	IF ( canyon_wall_left == 9999999.9 ) THEN
448	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
449	ENDIF
450	cxl = NINT( canyon_wall_left / dx )
451	cxr = cxl + cwx
452	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
453
454	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
455	!
456	!-- Street canyon in x direction
457	cwy = NINT( canyon_width_y / dy )
458	IF ( canyon_wall_south == 9999999.9 ) THEN
459	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
460	ENDIF
461	cys = NINT( canyon_wall_south / dy )
462	cyn = cys + cwy
463	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
464	ENDIF
465
466	END SELECT
467
468	IF ( TRIM( topography ) /= 'flat' ) THEN
469	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
470	IF ( TRIM( topography ) == 'single_building' .OR. &
471	TRIM( topography ) == 'single_street_canyon' ) THEN
472	WRITE ( io, 278 )
473	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
474	WRITE ( io, 279 )
475	ENDIF
476	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
477	WRITE ( io, 278 )
478	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
479	WRITE ( io, 279 )
480	ENDIF
481	ENDIF
482
483	IF ( plant_canopy ) THEN
484
485	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
486	IF ( passive_scalar ) THEN
487	WRITE ( io, 281 ) scalar_exchange_coefficient, &
488	leaf_surface_concentration
489	ENDIF
490
491	!
492	!-- Heat flux at the top of vegetation
493	WRITE ( io, 282 ) cthf
494
495	!
496	!-- Leaf area density profile
497	!-- Building output strings, starting with surface value
498	WRITE ( learde, '(F6.2)' ) lad_surface
499	gradients = '------'
500	slices = ' 0'
501	coordinates = ' 0.0'
502	i = 1
503	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
504
505	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
506	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
507
508	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
509	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
510
511	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
512	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
513
514	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
515	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
516
517	i = i + 1
518	ENDDO
519
520	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
521	TRIM( gradients ), TRIM( slices )
522
523	ENDIF
524
525	!
526	!-- Boundary conditions
527	IF ( ibc_p_b == 0 ) THEN
528	runten = 'p(0) = 0 \|'
529	ELSEIF ( ibc_p_b == 1 ) THEN
530	runten = 'p(0) = p(1) \|'
531	ELSE
532	runten = 'p(0) = p(1) +R\|'
533	ENDIF
534	IF ( ibc_p_t == 0 ) THEN
535	roben = 'p(nzt+1) = 0 \|'
536	ELSE
537	roben = 'p(nzt+1) = p(nzt) \|'
538	ENDIF
539
540	IF ( ibc_uv_b == 0 ) THEN
541	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
542	ELSE
543	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
544	ENDIF
545	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
546	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
547	ELSEIF ( ibc_uv_t == 0 ) THEN
548	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
549	ELSE
550	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
551	ENDIF
552
553	IF ( ibc_pt_b == 0 ) THEN
554	runten = TRIM( runten ) // ' pt(0) = pt_surface'
555	ELSEIF ( ibc_pt_b == 1 ) THEN
556	runten = TRIM( runten ) // ' pt(0) = pt(1)'
557	ELSEIF ( ibc_pt_b == 2 ) THEN
558	runten = TRIM( runten ) // ' pt(0) = from coupled model'
559	ENDIF
560	IF ( ibc_pt_t == 0 ) THEN
561	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
562	ELSEIF( ibc_pt_t == 1 ) THEN
563	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
564	ELSEIF( ibc_pt_t == 2 ) THEN
565	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
566	ENDIF
567
568	WRITE ( io, 300 ) runten, roben
569
570	IF ( .NOT. constant_diffusion ) THEN
571	IF ( ibc_e_b == 1 ) THEN
572	runten = 'e(0) = e(1)'
573	ELSE
574	runten = 'e(0) = e(1) = (u/0.1)*2'
575	ENDIF
576	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
577
578	WRITE ( io, 301 ) 'e', runten, roben
579
580	ENDIF
581
582	IF ( ocean ) THEN
583	runten = 'sa(0) = sa(1)'
584	IF ( ibc_sa_t == 0 ) THEN
585	roben = 'sa(nzt+1) = sa_surface'
586	ELSE
587	roben = 'sa(nzt+1) = sa(nzt)'
588	ENDIF
589	WRITE ( io, 301 ) 'sa', runten, roben
590	ENDIF
591
592	IF ( humidity ) THEN
593	IF ( ibc_q_b == 0 ) THEN
594	runten = 'q(0) = q_surface'
595	ELSE
596	runten = 'q(0) = q(1)'
597	ENDIF
598	IF ( ibc_q_t == 0 ) THEN
599	roben = 'q(nzt) = q_top'
600	ELSE
601	roben = 'q(nzt) = q(nzt-1) + dq/dz'
602	ENDIF
603	WRITE ( io, 301 ) 'q', runten, roben
604	ENDIF
605
606	IF ( passive_scalar ) THEN
607	IF ( ibc_q_b == 0 ) THEN
608	runten = 's(0) = s_surface'
609	ELSE
610	runten = 's(0) = s(1)'
611	ENDIF
612	IF ( ibc_q_t == 0 ) THEN
613	roben = 's(nzt) = s_top'
614	ELSE
615	roben = 's(nzt) = s(nzt-1) + ds/dz'
616	ENDIF
617	WRITE ( io, 301 ) 's', runten, roben
618	ENDIF
619
620	IF ( use_surface_fluxes ) THEN
621	WRITE ( io, 303 )
622	IF ( constant_heatflux ) THEN
623	WRITE ( io, 306 ) surface_heatflux
624	IF ( random_heatflux ) WRITE ( io, 307 )
625	ENDIF
626	IF ( humidity .AND. constant_waterflux ) THEN
627	WRITE ( io, 311 ) surface_waterflux
628	ENDIF
629	IF ( passive_scalar .AND. constant_waterflux ) THEN
630	WRITE ( io, 313 ) surface_waterflux
631	ENDIF
632	ENDIF
633
634	IF ( use_top_fluxes ) THEN
635	WRITE ( io, 304 )
636	IF ( coupling_mode == 'uncoupled' ) THEN
637	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
638	IF ( constant_top_heatflux ) THEN
639	WRITE ( io, 306 ) top_heatflux
640	ENDIF
641	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
642	WRITE ( io, 316 )
643	ENDIF
644	IF ( ocean .AND. constant_top_salinityflux ) THEN
645	WRITE ( io, 309 ) top_salinityflux
646	ENDIF
647	IF ( humidity .OR. passive_scalar ) THEN
648	WRITE ( io, 315 )
649	ENDIF
650	ENDIF
651
652	IF ( prandtl_layer ) THEN
653	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
654	rif_min, rif_max
655	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
656	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
657	WRITE ( io, 312 )
658	ENDIF
659	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
660	WRITE ( io, 314 )
661	ENDIF
662	ELSE
663	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
664	WRITE ( io, 310 ) rif_min, rif_max
665	ENDIF
666	ENDIF
667
668	WRITE ( io, 317 ) bc_lr, bc_ns
669	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
670	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
671	IF ( turbulent_inflow ) THEN
672	WRITE ( io, 319 ) recycling_width, recycling_plane, &
673	inflow_damping_height, inflow_damping_width
674	ENDIF
675	ENDIF
676
677	!
678	!-- Listing of 1D-profiles
679	WRITE ( io, 325 ) dt_dopr_listing
680	IF ( averaging_interval_pr /= 0.0 ) THEN
681	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
682	ENDIF
683
684	!
685	!-- DATA output
686	WRITE ( io, 330 )
687	IF ( averaging_interval_pr /= 0.0 ) THEN
688	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
689	ENDIF
690
691	!
692	!-- 1D-profiles
693	dopr_chr = 'Profile:'
694	IF ( dopr_n /= 0 ) THEN
695	WRITE ( io, 331 )
696
697	output_format = ''
698	IF ( netcdf_output ) THEN
699	IF ( netcdf_64bit ) THEN
700	output_format = 'netcdf (64 bit offset)'
701	ELSE
702	output_format = 'netcdf'
703	ENDIF
704	ENDIF
705	IF ( profil_output ) THEN
706	IF ( netcdf_output ) THEN
707	output_format = TRIM( output_format ) // ' and profil'
708	ELSE
709	output_format = 'profil'
710	ENDIF
711	ENDIF
712	WRITE ( io, 344 ) output_format
713
714	DO i = 1, dopr_n
715	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
716	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
717	WRITE ( io, 332 ) dopr_chr
718	dopr_chr = ' :'
719	ENDIF
720	ENDDO
721
722	IF ( dopr_chr /= '' ) THEN
723	WRITE ( io, 332 ) dopr_chr
724	ENDIF
725	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
726	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
727	ENDIF
728
729	!
730	!-- 2D-arrays
731	DO av = 0, 1
732
733	i = 1
734	do2d_xy = ''
735	do2d_xz = ''
736	do2d_yz = ''
737	DO WHILE ( do2d(av,i) /= ' ' )
738
739	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
740	do2d_mode = do2d(av,i)(l-1:l)
741
742	SELECT CASE ( do2d_mode )
743	CASE ( 'xy' )
744	ll = LEN_TRIM( do2d_xy )
745	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
746	CASE ( 'xz' )
747	ll = LEN_TRIM( do2d_xz )
748	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
749	CASE ( 'yz' )
750	ll = LEN_TRIM( do2d_yz )
751	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
752	END SELECT
753
754	i = i + 1
755
756	ENDDO
757
758	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
759	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
760	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
761	( netcdf_output .OR. iso2d_output ) ) THEN
762
763	IF ( av == 0 ) THEN
764	WRITE ( io, 334 ) ''
765	ELSE
766	WRITE ( io, 334 ) '(time-averaged)'
767	ENDIF
768
769	IF ( do2d_at_begin ) THEN
770	begin_chr = 'and at the start'
771	ELSE
772	begin_chr = ''
773	ENDIF
774
775	output_format = ''
776	IF ( netcdf_output ) THEN
777	IF ( netcdf_64bit ) THEN
778	output_format = 'netcdf (64 bit offset)'
779	ELSE
780	output_format = 'netcdf'
781	ENDIF
782	ENDIF
783	IF ( iso2d_output ) THEN
784	IF ( netcdf_output ) THEN
785	output_format = TRIM( output_format ) // ' and iso2d'
786	ELSE
787	output_format = 'iso2d'
788	ENDIF
789	ENDIF
790	WRITE ( io, 344 ) output_format
791
792	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
793	i = 1
794	slices = '/'
795	coordinates = '/'
796	!
797	!-- Building strings with index and coordinate informations of the
798	!-- slices
799	DO WHILE ( section(i,1) /= -9999 )
800
801	WRITE (section_chr,'(I5)') section(i,1)
802	section_chr = ADJUSTL( section_chr )
803	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
804
805	IF ( section(i,1) == -1 ) THEN
806	WRITE (coor_chr,'(F10.1)') -1.0
807	ELSE
808	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
809	ENDIF
810	coor_chr = ADJUSTL( coor_chr )
811	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
812
813	i = i + 1
814	ENDDO
815	IF ( av == 0 ) THEN
816	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
817	TRIM( begin_chr ), 'k', TRIM( slices ), &
818	TRIM( coordinates )
819	IF ( skip_time_do2d_xy /= 0.0 ) THEN
820	WRITE ( io, 339 ) skip_time_do2d_xy
821	ENDIF
822	ELSE
823	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
824	TRIM( begin_chr ), averaging_interval, &
825	dt_averaging_input, 'k', TRIM( slices ), &
826	TRIM( coordinates )
827	IF ( skip_time_data_output_av /= 0.0 ) THEN
828	WRITE ( io, 339 ) skip_time_data_output_av
829	ENDIF
830	ENDIF
831
832	ENDIF
833
834	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
835	i = 1
836	slices = '/'
837	coordinates = '/'
838	!
839	!-- Building strings with index and coordinate informations of the
840	!-- slices
841	DO WHILE ( section(i,2) /= -9999 )
842
843	WRITE (section_chr,'(I5)') section(i,2)
844	section_chr = ADJUSTL( section_chr )
845	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
846
847	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
848	coor_chr = ADJUSTL( coor_chr )
849	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
850
851	i = i + 1
852	ENDDO
853	IF ( av == 0 ) THEN
854	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
855	TRIM( begin_chr ), 'j', TRIM( slices ), &
856	TRIM( coordinates )
857	IF ( skip_time_do2d_xz /= 0.0 ) THEN
858	WRITE ( io, 339 ) skip_time_do2d_xz
859	ENDIF
860	ELSE
861	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
862	TRIM( begin_chr ), averaging_interval, &
863	dt_averaging_input, 'j', TRIM( slices ), &
864	TRIM( coordinates )
865	IF ( skip_time_data_output_av /= 0.0 ) THEN
866	WRITE ( io, 339 ) skip_time_data_output_av
867	ENDIF
868	ENDIF
869	ENDIF
870
871	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
872	i = 1
873	slices = '/'
874	coordinates = '/'
875	!
876	!-- Building strings with index and coordinate informations of the
877	!-- slices
878	DO WHILE ( section(i,3) /= -9999 )
879
880	WRITE (section_chr,'(I5)') section(i,3)
881	section_chr = ADJUSTL( section_chr )
882	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
883
884	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
885	coor_chr = ADJUSTL( coor_chr )
886	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
887
888	i = i + 1
889	ENDDO
890	IF ( av == 0 ) THEN
891	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
892	TRIM( begin_chr ), 'i', TRIM( slices ), &
893	TRIM( coordinates )
894	IF ( skip_time_do2d_yz /= 0.0 ) THEN
895	WRITE ( io, 339 ) skip_time_do2d_yz
896	ENDIF
897	ELSE
898	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
899	TRIM( begin_chr ), averaging_interval, &
900	dt_averaging_input, 'i', TRIM( slices ), &
901	TRIM( coordinates )
902	IF ( skip_time_data_output_av /= 0.0 ) THEN
903	WRITE ( io, 339 ) skip_time_data_output_av
904	ENDIF
905	ENDIF
906	ENDIF
907
908	ENDIF
909
910	ENDDO
911
912	!
913	!-- 3d-arrays
914	DO av = 0, 1
915
916	i = 1
917	do3d_chr = ''
918	DO WHILE ( do3d(av,i) /= ' ' )
919
920	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
921	i = i + 1
922
923	ENDDO
924
925	IF ( do3d_chr /= '' ) THEN
926	IF ( av == 0 ) THEN
927	WRITE ( io, 336 ) ''
928	ELSE
929	WRITE ( io, 336 ) '(time-averaged)'
930	ENDIF
931
932	output_format = ''
933	IF ( netcdf_output ) THEN
934	IF ( netcdf_64bit_3d ) THEN
935	output_format = 'netcdf (64 bit offset)'
936	ELSE
937	output_format = 'netcdf'
938	ENDIF
939	ENDIF
940	IF ( avs_output ) THEN
941	IF ( netcdf_output ) THEN
942	output_format = TRIM( output_format ) // ' and avs'
943	ELSE
944	output_format = 'avs'
945	ENDIF
946	ENDIF
947	WRITE ( io, 344 ) output_format
948
949	IF ( do3d_at_begin ) THEN
950	begin_chr = 'and at the start'
951	ELSE
952	begin_chr = ''
953	ENDIF
954	IF ( av == 0 ) THEN
955	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
956	zu(nz_do3d), nz_do3d
957	ELSE
958	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
959	TRIM( begin_chr ), averaging_interval, &
960	dt_averaging_input, zu(nz_do3d), nz_do3d
961	ENDIF
962
963	IF ( do3d_compress ) THEN
964	do3d_chr = ''
965	i = 1
966	DO WHILE ( do3d(av,i) /= ' ' )
967
968	SELECT CASE ( do3d(av,i) )
969	CASE ( 'u' )
970	j = 1
971	CASE ( 'v' )
972	j = 2
973	CASE ( 'w' )
974	j = 3
975	CASE ( 'p' )
976	j = 4
977	CASE ( 'pt' )
978	j = 5
979	END SELECT
980	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
981	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
982	':' // prec // ','
983	i = i + 1
984
985	ENDDO
986	WRITE ( io, 338 ) do3d_chr
987
988	ENDIF
989
990	IF ( av == 0 ) THEN
991	IF ( skip_time_do3d /= 0.0 ) THEN
992	WRITE ( io, 339 ) skip_time_do3d
993	ENDIF
994	ELSE
995	IF ( skip_time_data_output_av /= 0.0 ) THEN
996	WRITE ( io, 339 ) skip_time_data_output_av
997	ENDIF
998	ENDIF
999
1000	ENDIF
1001
1002	ENDDO
1003
1004	!
1005	!-- masked arrays
1006	IF ( masks > 0 ) WRITE ( io, 345 ) &
1007	mask_scale_x, mask_scale_y, mask_scale_z
1008	DO mid = 1, masks
1009	DO av = 0, 1
1010
1011	i = 1
1012	domask_chr = ''
1013	DO WHILE ( domask(mid,av,i) /= ' ' )
1014	domask_chr = TRIM( domask_chr ) // ' ' // &
1015	TRIM( domask(mid,av,i) ) // ','
1016	i = i + 1
1017	ENDDO
1018
1019	IF ( domask_chr /= '' ) THEN
1020	IF ( av == 0 ) THEN
1021	WRITE ( io, 346 ) '', mid
1022	ELSE
1023	WRITE ( io, 346 ) ' (time-averaged)', mid
1024	ENDIF
1025
1026	output_format = ''
1027	IF ( netcdf_output ) THEN
1028	SELECT CASE ( nc_format_mask(mid,av) )
1029	CASE ( 1 )
1030	output_format = 'netcdf (classic format)'
1031	CASE ( 2 )
1032	output_format = 'netcdf (64bit offset format)'
1033	CASE ( 3 )
1034	output_format = 'netcdf (NetCDF 4 format)'
1035	CASE ( 4 )
1036	output_format = 'netcdf (NetCDF 4 classic model format)'
1037	END SELECT
1038	ENDIF
1039	WRITE ( io, 344 ) output_format
1040
1041	IF ( av == 0 ) THEN
1042	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1043	ELSE
1044	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1045	averaging_interval, dt_averaging_input
1046	ENDIF
1047
1048	IF ( av == 0 ) THEN
1049	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1050	WRITE ( io, 339 ) skip_time_domask(mid)
1051	ENDIF
1052	ELSE
1053	IF ( skip_time_data_output_av /= 0.0 ) THEN
1054	WRITE ( io, 339 ) skip_time_data_output_av
1055	ENDIF
1056	ENDIF
1057	!
1058	!-- output locations
1059	DO dim = 1, 3
1060	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1061	count = 0
1062	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1063	count = count + 1
1064	ENDDO
1065	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1066	mask(mid,dim,:count)
1067	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1068	mask_loop(mid,dim,2) < 0.0 .AND. &
1069	mask_loop(mid,dim,3) == 0.0 ) THEN
1070	WRITE ( io, 350 ) dir(dim), dir(dim)
1071	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1072	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1073	mask_loop(mid,dim,1:2)
1074	ELSE
1075	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1076	mask_loop(mid,dim,1:3)
1077	ENDIF
1078	ENDDO
1079	ENDIF
1080
1081	ENDDO
1082	ENDDO
1083
1084	!
1085	!-- Timeseries
1086	IF ( dt_dots /= 9999999.9 ) THEN
1087	WRITE ( io, 340 )
1088
1089	output_format = ''
1090	IF ( netcdf_output ) THEN
1091	IF ( netcdf_64bit ) THEN
1092	output_format = 'netcdf (64 bit offset)'
1093	ELSE
1094	output_format = 'netcdf'
1095	ENDIF
1096	ENDIF
1097	IF ( profil_output ) THEN
1098	IF ( netcdf_output ) THEN
1099	output_format = TRIM( output_format ) // ' and profil'
1100	ELSE
1101	output_format = 'profil'
1102	ENDIF
1103	ENDIF
1104	WRITE ( io, 344 ) output_format
1105	WRITE ( io, 341 ) dt_dots
1106	ENDIF
1107
1108	#if defined( __dvrp_graphics )
1109	!
1110	!-- Dvrp-output
1111	IF ( dt_dvrp /= 9999999.9 ) THEN
1112	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1113	TRIM( dvrp_username ), TRIM( dvrp_directory )
1114	i = 1
1115	l = 0
1116	m = 0
1117	DO WHILE ( mode_dvrp(i) /= ' ' )
1118	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1119	READ ( mode_dvrp(i), '(10X,I2)' ) j
1120	l = l + 1
1121	IF ( do3d(0,j) /= ' ' ) THEN
1122	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1123	isosurface_color(:,l)
1124	ENDIF
1125	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1126	READ ( mode_dvrp(i), '(6X,I2)' ) j
1127	m = m + 1
1128	IF ( do2d(0,j) /= ' ' ) THEN
1129	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1130	slicer_range_limits_dvrp(:,m)
1131	ENDIF
1132	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1133	WRITE ( io, 363 ) dvrp_psize
1134	IF ( particle_dvrpsize /= 'none' ) THEN
1135	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1136	dvrpsize_interval
1137	ENDIF
1138	IF ( particle_color /= 'none' ) THEN
1139	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1140	color_interval
1141	ENDIF
1142	ENDIF
1143	i = i + 1
1144	ENDDO
1145
1146	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1147	superelevation_y, superelevation, clip_dvrp_l, &
1148	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1149
1150	IF ( TRIM( topography ) /= 'flat' ) THEN
1151	WRITE ( io, 366 ) topography_color
1152	IF ( cluster_size > 1 ) THEN
1153	WRITE ( io, 367 ) cluster_size
1154	ENDIF
1155	ENDIF
1156
1157	ENDIF
1158	#endif
1159
1160	#if defined( __spectra )
1161	!
1162	!-- Spectra output
1163	IF ( dt_dosp /= 9999999.9 ) THEN
1164	WRITE ( io, 370 )
1165
1166	output_format = ''
1167	IF ( netcdf_output ) THEN
1168	IF ( netcdf_64bit ) THEN
1169	output_format = 'netcdf (64 bit offset)'
1170	ELSE
1171	output_format = 'netcdf'
1172	ENDIF
1173	ENDIF
1174	IF ( profil_output ) THEN
1175	IF ( netcdf_output ) THEN
1176	output_format = TRIM( output_format ) // ' and profil'
1177	ELSE
1178	output_format = 'profil'
1179	ENDIF
1180	ENDIF
1181	WRITE ( io, 344 ) output_format
1182	WRITE ( io, 371 ) dt_dosp
1183	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1184	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1185	( spectra_direction(i), i = 1,10 ), &
1186	( comp_spectra_level(i), i = 1,100 ), &
1187	( plot_spectra_level(i), i = 1,100 ), &
1188	averaging_interval_sp, dt_averaging_input_pr
1189	ENDIF
1190	#endif
1191
1192	WRITE ( io, 99 )
1193
1194	!
1195	!-- Physical quantities
1196	WRITE ( io, 400 )
1197
1198	!
1199	!-- Geostrophic parameters
1200	WRITE ( io, 410 ) omega, phi, f, fs
1201
1202	!
1203	!-- Other quantities
1204	WRITE ( io, 411 ) g
1205	IF ( use_reference ) THEN
1206	IF ( ocean ) THEN
1207	WRITE ( io, 412 ) prho_reference
1208	ELSE
1209	WRITE ( io, 413 ) pt_reference
1210	ENDIF
1211	ENDIF
1212
1213	!
1214	!-- Cloud physics parameters
1215	IF ( cloud_physics ) THEN
1216	WRITE ( io, 415 )
1217	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1218	ENDIF
1219
1220	!-- Profile of the geostrophic wind (component ug)
1221	!-- Building output strings
1222	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1223	gradients = '------'
1224	slices = ' 0'
1225	coordinates = ' 0.0'
1226	i = 1
1227	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1228
1229	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1230	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1231
1232	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1233	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1234
1235	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1236	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1237
1238	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1239	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1240
1241	IF ( i == 10 ) THEN
1242	EXIT
1243	ELSE
1244	i = i + 1
1245	ENDIF
1246
1247	ENDDO
1248
1249	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1250	TRIM( gradients ), TRIM( slices )
1251
1252	!-- Profile of the geostrophic wind (component vg)
1253	!-- Building output strings
1254	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1255	gradients = '------'
1256	slices = ' 0'
1257	coordinates = ' 0.0'
1258	i = 1
1259	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1260
1261	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1262	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1263
1264	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1265	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1266
1267	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1268	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1269
1270	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1271	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1272
1273	IF ( i == 10 ) THEN
1274	EXIT
1275	ELSE
1276	i = i + 1
1277	ENDIF
1278
1279	ENDDO
1280
1281	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1282	TRIM( gradients ), TRIM( slices )
1283
1284	!
1285	!-- Initial temperature profile
1286	!-- Building output strings, starting with surface temperature
1287	WRITE ( temperatures, '(F6.2)' ) pt_surface
1288	gradients = '------'
1289	slices = ' 0'
1290	coordinates = ' 0.0'
1291	i = 1
1292	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1293
1294	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1295	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1296
1297	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1298	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1299
1300	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1301	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1302
1303	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1304	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1305
1306	IF ( i == 10 ) THEN
1307	EXIT
1308	ELSE
1309	i = i + 1
1310	ENDIF
1311
1312	ENDDO
1313
1314	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1315	TRIM( gradients ), TRIM( slices )
1316
1317	!
1318	!-- Initial humidity profile
1319	!-- Building output strings, starting with surface humidity
1320	IF ( humidity .OR. passive_scalar ) THEN
1321	WRITE ( temperatures, '(E8.1)' ) q_surface
1322	gradients = '--------'
1323	slices = ' 0'
1324	coordinates = ' 0.0'
1325	i = 1
1326	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1327
1328	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1329	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1330
1331	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1332	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1333
1334	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1335	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1336
1337	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1338	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1339
1340	IF ( i == 10 ) THEN
1341	EXIT
1342	ELSE
1343	i = i + 1
1344	ENDIF
1345
1346	ENDDO
1347
1348	IF ( humidity ) THEN
1349	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1350	TRIM( gradients ), TRIM( slices )
1351	ELSE
1352	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1353	TRIM( gradients ), TRIM( slices )
1354	ENDIF
1355	ENDIF
1356
1357	!
1358	!-- Initial salinity profile
1359	!-- Building output strings, starting with surface salinity
1360	IF ( ocean ) THEN
1361	WRITE ( temperatures, '(F6.2)' ) sa_surface
1362	gradients = '------'
1363	slices = ' 0'
1364	coordinates = ' 0.0'
1365	i = 1
1366	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1367
1368	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1369	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1370
1371	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1372	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1373
1374	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1375	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1376
1377	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1378	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1379
1380	IF ( i == 10 ) THEN
1381	EXIT
1382	ELSE
1383	i = i + 1
1384	ENDIF
1385
1386	ENDDO
1387
1388	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1389	TRIM( gradients ), TRIM( slices )
1390	ENDIF
1391
1392	!
1393	!-- Profile for the large scale vertial velocity
1394	!-- Building output strings, starting with surface value
1395	IF ( large_scale_subsidence ) THEN
1396	temperatures = ' 0.0'
1397	gradients = '------'
1398	slices = ' 0'
1399	coordinates = ' 0.0'
1400	i = 1
1401	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
1402
1403	WRITE (coor_chr,'(E10.2,7X)') &
1404	w_subs(ws_vertical_gradient_level_ind(i))
1405	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1406
1407	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
1408	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1409
1410	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
1411	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1412
1413	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
1414	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1415
1416	IF ( i == 10 ) THEN
1417	EXIT
1418	ELSE
1419	i = i + 1
1420	ENDIF
1421
1422	ENDDO
1423
1424	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1425	TRIM( gradients ), TRIM( slices )
1426	ENDIF
1427
1428	!
1429	!-- LES / turbulence parameters
1430	WRITE ( io, 450 )
1431
1432	!--
1433	! ... LES-constants used must still be added here
1434	!--
1435	IF ( constant_diffusion ) THEN
1436	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1437	prandtl_number
1438	ENDIF
1439	IF ( .NOT. constant_diffusion) THEN
1440	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1441	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1442	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1443	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1444	ENDIF
1445
1446	!
1447	!-- Special actions during the run
1448	WRITE ( io, 470 )
1449	IF ( create_disturbances ) THEN
1450	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1451	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1452	zu(disturbance_level_ind_t), disturbance_level_ind_t
1453	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1454	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1455	ELSE
1456	WRITE ( io, 473 ) disturbance_energy_limit
1457	ENDIF
1458	WRITE ( io, 474 ) TRIM( random_generator )
1459	ENDIF
1460	IF ( pt_surface_initial_change /= 0.0 ) THEN
1461	WRITE ( io, 475 ) pt_surface_initial_change
1462	ENDIF
1463	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1464	WRITE ( io, 476 ) q_surface_initial_change
1465	ENDIF
1466	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1467	WRITE ( io, 477 ) q_surface_initial_change
1468	ENDIF
1469
1470	IF ( particle_advection ) THEN
1471	!
1472	!-- Particle attributes
1473	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1474	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1475	end_time_prel, dt_sort_particles
1476	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1477	IF ( random_start_position ) WRITE ( io, 481 )
1478	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1479	WRITE ( io, 495 ) total_number_of_particles
1480	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1481	WRITE ( io, 483 ) maximum_number_of_tailpoints
1482	IF ( minimum_tailpoint_distance /= 0 ) THEN
1483	WRITE ( io, 484 ) total_number_of_tails, &
1484	minimum_tailpoint_distance, &
1485	maximum_tailpoint_age
1486	ENDIF
1487	ENDIF
1488	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1489	WRITE ( io, 485 ) dt_write_particle_data
1490	output_format = ''
1491	IF ( netcdf_output ) THEN
1492	IF ( netcdf_64bit ) THEN
1493	output_format = 'netcdf (64 bit offset) and binary'
1494	ELSE
1495	output_format = 'netcdf and binary'
1496	ENDIF
1497	ELSE
1498	output_format = 'binary'
1499	ENDIF
1500	WRITE ( io, 344 ) output_format
1501	ENDIF
1502	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1503	IF ( write_particle_statistics ) WRITE ( io, 486 )
1504
1505	WRITE ( io, 487 ) number_of_particle_groups
1506
1507	DO i = 1, number_of_particle_groups
1508	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1509	WRITE ( io, 490 ) i, 0.0
1510	WRITE ( io, 492 )
1511	ELSE
1512	WRITE ( io, 490 ) i, radius(i)
1513	IF ( density_ratio(i) /= 0.0 ) THEN
1514	WRITE ( io, 491 ) density_ratio(i)
1515	ELSE
1516	WRITE ( io, 492 )
1517	ENDIF
1518	ENDIF
1519	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1520	pdx(i), pdy(i), pdz(i)
1521	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1522	ENDDO
1523
1524	ENDIF
1525
1526
1527	!
1528	!-- Parameters of 1D-model
1529	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1530	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1531	mixing_length_1d, dissipation_1d
1532	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1533	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1534	ENDIF
1535	ENDIF
1536
1537	!
1538	!-- User-defined informations
1539	CALL user_header( io )
1540
1541	WRITE ( io, 99 )
1542
1543	!
1544	!-- Write buffer contents to disc immediately
1545	CALL local_flush( io )
1546
1547	!
1548	!-- Here the FORMATs start
1549
1550	99 FORMAT (1X,78('-'))
1551	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1552	1X,'* ',A,' *',9X,A/ &
1553	1X,'***************************',9X,42('-'))
1554	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1555	37X,42('-'))
1556	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1557	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1558	' Run on host: ',A10)
1559	#if defined( __parallel )
1560	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1561	')',1X,A)
1562	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1563	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1564	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1565	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1566	37X,'because the job is running on an SMP-cluster')
1567	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1568	#endif
1569	110 FORMAT (/' Numerical Schemes:'/ &
1570	' -----------------'/)
1571	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1572	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1573	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1574	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1575	' or Upstream')
1576	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1577	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1578	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1579	' or Upstream')
1580	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1581	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1582	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1583	' Translation velocity = ',A/ &
1584	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1585	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1586	' of timestep changes)')
1587	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1588	' timestep changes')
1589	122 FORMAT (' --> Time differencing scheme: ',A)
1590	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1591	' maximum damping coefficient: ',F5.3, ' 1/s')
1592	124 FORMAT (' Spline-overshoots are being suppressed')
1593	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1594	' of'/ &
1595	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1596	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1597	' of'/ &
1598	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1599	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1600	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1601	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1602	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1603	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1604	130 FORMAT (' --> Additional prognostic equation for the total water content')
1605	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1606	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1607	' effective emissivity scheme')
1608	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1609	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1610	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1611	A,'-cycle)'/ &
1612	' number of grid levels: ',I2/ &
1613	' Gauss-Seidel red/black iterations: ',I2)
1614	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1615	I3,')')
1616	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1617	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1618	I3,')'/ &
1619	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1620	I3,')')
1621	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1622	139 FORMAT (' --> Loop optimization method: ',A)
1623	140 FORMAT (' maximum residual allowed: ',E10.3)
1624	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1625	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1626	'step')
1627	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1628	'kinetic energy')
1629	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1630	'conserved'/ &
1631	' using the ',A,' mode')
1632	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1633	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1634	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1635	/' starting from dp_level_b =', F8.3, 'm', A /)
1636	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1637	'prognostic equation for')
1638	154 FORMAT (' the potential temperature')
1639	200 FORMAT (//' Run time and time step information:'/ &
1640	' ----------------------------------'/)
1641	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1642	' CFL-factor: ',F4.2)
1643	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1644	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1645	' End time: ',F9.3,' s')
1646	204 FORMAT ( A,F9.3,' s')
1647	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1648	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1649	' CPU-time used: ',F9.3,' s per timestep: ', &
1650	' ',F9.3,' s'/ &
1651	' per second of simulated tim', &
1652	'e: ',F9.3,' s')
1653	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1654	250 FORMAT (//' Computational grid and domain size:'/ &
1655	' ----------------------------------'// &
1656	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1657	' m dz = ',F7.3,' m'/ &
1658	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1659	' m z(u) = ',F10.3,' m'/)
1660	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1661	' factor: ',F5.3/ &
1662	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1663	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1664	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1665	255 FORMAT (' Subdomains have equal size')
1666	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1667	'have smaller sizes'/ &
1668	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1669	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1670	' degrees')
1671	270 FORMAT (//' Topography informations:'/ &
1672	' -----------------------'// &
1673	1X,'Topography: ',A)
1674	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1675	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1676	' / ',I4)
1677	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1678	' direction' / &
1679	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1680	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1681	278 FORMAT (' Topography grid definition convention:'/ &
1682	' cell edge (staggered grid points'/ &
1683	' (u in x-direction, v in y-direction))' /)
1684	279 FORMAT (' Topography grid definition convention:'/ &
1685	' cell center (scalar grid points)' /)
1686	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1687	' ------------------------------'// &
1688	' Canopy mode: ', A / &
1689	' Canopy top: ',I4 / &
1690	' Leaf drag coefficient: ',F6.2 /)
1691	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1692	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1693	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1694	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1695	' Height: ',A,' m'/ &
1696	' Leaf area density: ',A,' m2/m3'/ &
1697	' Gradient: ',A,' m2/m4'/ &
1698	' Gridpoint: ',A)
1699
1700	300 FORMAT (//' Boundary conditions:'/ &
1701	' -------------------'// &
1702	' p uv ', &
1703	' pt'// &
1704	' B. bound.: ',A/ &
1705	' T. bound.: ',A)
1706	301 FORMAT (/' ',A// &
1707	' B. bound.: ',A/ &
1708	' T. bound.: ',A)
1709	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1710	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1711	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1712	'computational u,v-level:'// &
1713	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1714	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1715	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1716	307 FORMAT (' Heatflux has a random normal distribution')
1717	308 FORMAT (' Predefined surface temperature')
1718	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1719	310 FORMAT (//' 1D-Model:'// &
1720	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1721	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1722	312 FORMAT (' Predefined surface humidity')
1723	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1724	314 FORMAT (' Predefined scalar value at the surface')
1725	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1726	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1727	'atmosphere model')
1728	317 FORMAT (//' Lateral boundaries:'/ &
1729	' left/right: ',A/ &
1730	' north/south: ',A)
1731	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1732	'max =',F5.1,' m**2/s')
1733	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1734	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1735	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1736	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1737	' v: ',F9.6,' m2/s2')
1738	325 FORMAT (//' List output:'/ &
1739	' -----------'// &
1740	' 1D-Profiles:'/ &
1741	' Output every ',F8.2,' s')
1742	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1743	' Averaging input every ',F8.2,' s')
1744	330 FORMAT (//' Data output:'/ &
1745	' -----------'/)
1746	331 FORMAT (/' 1D-Profiles:')
1747	332 FORMAT (/' ',A)
1748	333 FORMAT (' Output every ',F8.2,' s',/ &
1749	' Time averaged over ',F8.2,' s'/ &
1750	' Averaging input every ',F8.2,' s')
1751	334 FORMAT (/' 2D-Arrays',A,':')
1752	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1753	' Output every ',F8.2,' s ',A/ &
1754	' Cross sections at ',A1,' = ',A/ &
1755	' scalar-coordinates: ',A,' m'/)
1756	336 FORMAT (/' 3D-Arrays',A,':')
1757	337 FORMAT (/' Arrays: ',A/ &
1758	' Output every ',F8.2,' s ',A/ &
1759	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1760	338 FORMAT (' Compressed data output'/ &
1761	' Decimal precision: ',A/)
1762	339 FORMAT (' No output during initial ',F8.2,' s')
1763	340 FORMAT (/' Time series:')
1764	341 FORMAT (' Output every ',F8.2,' s'/)
1765	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1766	' Output every ',F8.2,' s ',A/ &
1767	' Time averaged over ',F8.2,' s'/ &
1768	' Averaging input every ',F8.2,' s'/ &
1769	' Cross sections at ',A1,' = ',A/ &
1770	' scalar-coordinates: ',A,' m'/)
1771	343 FORMAT (/' Arrays: ',A/ &
1772	' Output every ',F8.2,' s ',A/ &
1773	' Time averaged over ',F8.2,' s'/ &
1774	' Averaging input every ',F8.2,' s'/ &
1775	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1776	344 FORMAT (' Output format: ',A/)
1777	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1778	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1779	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1780	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1781	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1782	347 FORMAT (' Variables: ',A/ &
1783	' Output every ',F8.2,' s')
1784	348 FORMAT (' Variables: ',A/ &
1785	' Output every ',F8.2,' s'/ &
1786	' Time averaged over ',F8.2,' s'/ &
1787	' Averaging input every ',F8.2,' s')
1788	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1789	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1790	13(' ',8(F8.2,',')/) )
1791	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1792	'all gridpoints along ',A,'-direction (default).' )
1793	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1794	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1795	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1796	#if defined( __dvrp_graphics )
1797	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1798	' Output every ',F7.1,' s'/ &
1799	' Output mode: ',A/ &
1800	' Host / User: ',A,' / ',A/ &
1801	' Directory: ',A// &
1802	' The sequence contains:')
1803	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1804	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1805	362 FORMAT (/' Slicer plane ',A/ &
1806	' Slicer limits: [',F6.2,',',F6.2,']')
1807	363 FORMAT (/' Particles'/ &
1808	' particle size: ',F7.2,' m')
1809	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1810	F6.2,',',F6.2,']')
1811	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1812	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1813	')'/ &
1814	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1815	' from y = ',F9.1,' m to y = ',F9.1,' m')
1816	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1817	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1818	#endif
1819	#if defined( __spectra )
1820	370 FORMAT (' Spectra:')
1821	371 FORMAT (' Output every ',F7.1,' s'/)
1822	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1823	' Directions: ', 10(A5,',')/ &
1824	' height levels k = ', 20(I3,',')/ &
1825	' ', 20(I3,',')/ &
1826	' ', 20(I3,',')/ &
1827	' ', 20(I3,',')/ &
1828	' ', 19(I3,','),I3,'.'/ &
1829	' height levels selected for standard plot:'/ &
1830	' k = ', 20(I3,',')/ &
1831	' ', 20(I3,',')/ &
1832	' ', 20(I3,',')/ &
1833	' ', 20(I3,',')/ &
1834	' ', 19(I3,','),I3,'.'/ &
1835	' Time averaged over ', F7.1, ' s,' / &
1836	' Profiles for the time averaging are taken every ', &
1837	F6.1,' s')
1838	#endif
1839	400 FORMAT (//' Physical quantities:'/ &
1840	' -------------------'/)
1841	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1842	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1843	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1844	' f* = ',F9.6,' 1/s')
1845	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1846	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1847	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1848	415 FORMAT (/' Cloud physics parameters:'/ &
1849	' ------------------------'/)
1850	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1851	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1852	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1853	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1854	' Vapourization heat : L_v = ',E8.2,' J/kg')
1855	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1856	' Height: ',A,' m'/ &
1857	' Temperature: ',A,' K'/ &
1858	' Gradient: ',A,' K/100m'/ &
1859	' Gridpoint: ',A)
1860	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1861	' Height: ',A,' m'/ &
1862	' Humidity: ',A,' kg/kg'/ &
1863	' Gradient: ',A,' (kg/kg)/100m'/ &
1864	' Gridpoint: ',A)
1865	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1866	' Height: ',A,' m'/ &
1867	' Scalar concentration: ',A,' kg/m**3'/ &
1868	' Gradient: ',A,' (kg/m**3)/100m'/ &
1869	' Gridpoint: ',A)
1870	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1871	' Height: ',A,' m'/ &
1872	' ug: ',A,' m/s'/ &
1873	' Gradient: ',A,' 1/100s'/ &
1874	' Gridpoint: ',A)
1875	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1876	' Height: ',A,' m'/ &
1877	' vg: ',A,' m/s'/ &
1878	' Gradient: ',A,' 1/100s'/ &
1879	' Gridpoint: ',A)
1880	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1881	' Height: ',A,' m'/ &
1882	' Salinity: ',A,' psu'/ &
1883	' Gradient: ',A,' psu/100m'/ &
1884	' Gridpoint: ',A)
1885	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1886	' Height: ',A,' m'/ &
1887	' w_subs: ',A,' m/s'/ &
1888	' Gradient: ',A,' (m/s)/100m'/ &
1889	' Gridpoint: ',A)
1890	450 FORMAT (//' LES / Turbulence quantities:'/ &
1891	' ---------------------------'/)
1892	451 FORMAT (' Diffusion coefficients are constant:'/ &
1893	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1894	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1895	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1896	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1897	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1898	470 FORMAT (//' Actions during the simulation:'/ &
1899	' -----------------------------'/)
1900	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1901	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1902	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1903	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1904	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1905	' to i/j =',I4)
1906	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1907	1X,F5.3, ' m2/s2')
1908	474 FORMAT (' Random number generator used : ',A/)
1909	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1910	'respectively, if'/ &
1911	' the value is negative) by ',F5.2,' K at the beginning of the',&
1912	' 3D-simulation'/)
1913	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1914	'respectively, if the'/ &
1915	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1916	' the 3D-simulation'/)
1917	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1918	'respectively, if the'/ &
1919	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1920	' the 3D-simulation'/)
1921	480 FORMAT (' Particles:'/ &
1922	' ---------'// &
1923	' Particle advection is active (switched on at t = ', F7.1, &
1924	' s)'/ &
1925	' Start of new particle generations every ',F6.1,' s'/ &
1926	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1927	' bottom: ', A, ' top: ', A/&
1928	' Maximum particle age: ',F9.1,' s'/ &
1929	' Advection stopped at t = ',F9.1,' s'/ &
1930	' Particles are sorted every ',F9.1,' s'/)
1931	481 FORMAT (' Particles have random start positions'/)
1932	482 FORMAT (' Particles are advected only horizontally'/)
1933	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1934	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1935	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1936	' Maximum age of the end of the tail: ',F8.2,' s')
1937	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1938	486 FORMAT (' Particle statistics are written on file'/)
1939	487 FORMAT (' Number of particle groups: ',I2/)
1940	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1941	' minimum timestep for advection: ', F7.5/)
1942	489 FORMAT (' Number of particles simultaneously released at each ', &
1943	'point: ', I5/)
1944	490 FORMAT (' Particle group ',I2,':'/ &
1945	' Particle radius: ',E10.3, 'm')
1946	491 FORMAT (' Particle inertia is activated'/ &
1947	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1948	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1949	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1950	' y:',F8.1,' - ',F8.1,' m'/&
1951	' z:',F8.1,' - ',F8.1,' m'/&
1952	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1953	' m dz = ',F8.1,' m'/)
1954	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1955	F8.2,' s'/)
1956	495 FORMAT (' Number of particles in total domain: ',I10/)
1957	500 FORMAT (//' 1D-Model parameters:'/ &
1958	' -------------------'// &
1959	' Simulation time: ',F8.1,' s'/ &
1960	' Run-controll output every: ',F8.1,' s'/ &
1961	' Vertical profile output every: ',F8.1,' s'/ &
1962	' Mixing length calculation: ',A/ &
1963	' Dissipation calculation: ',A/)
1964	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1965
1966
1967	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |