Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 204

Last change on this file since 204 was 200, checked in by raasch, 16 years ago
format adjustments in header allowing output of larger revision numbers
Property svn:keywords set to `Id`
File size: 63.0 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 200 2008-09-17 09:49:06Z raasch $
11	!
12	! 198 2008-09-17 08:55:28Z raasch
13	! Format adjustments allowing output of larger revision numbers
14	!
15	! 197 2008-09-16 15:29:03Z raasch
16	! allow 100 spectra levels instead of 10 for consistency with
17	! define_netcdf_header,
18	! bugfix in the output of the characteristic levels of potential temperature,
19	! geostrophic wind, scalar concentration, humidity and leaf area density,
20	! output of turbulence recycling informations
21	!
22	! 138 2007-11-28 10:03:58Z letzel
23	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
24	! Allow two instead of one digit to specify isosurface and slicer variables.
25	! Output of sorting frequency of particles
26	!
27	! 108 2007-08-24 15:10:38Z letzel
28	! Output of informations for coupled model runs (boundary conditions etc.)
29	! + output of momentumfluxes at the top boundary
30	! Rayleigh damping for ocean, e_init
31	!
32	! 97 2007-06-21 08:23:15Z raasch
33	! Adjustments for the ocean version.
34	! use_pt_reference renamed use_reference
35	!
36	! 87 2007-05-22 15:46:47Z raasch
37	! Bugfix: output of use_upstream_for_tke
38	!
39	! 82 2007-04-16 15:40:52Z raasch
40	! Preprocessor strings for different linux clusters changed to "lc",
41	! routine local_flush is used for buffer flushing
42	!
43	! 76 2007-03-29 00:58:32Z raasch
44	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
45	! output of the loop optimization method, moisture renamed humidity,
46	! output of subversion revision number
47	!
48	! 19 2007-02-23 04:53:48Z raasch
49	! Output of scalar flux applied at top boundary
50	!
51	! RCS Log replace by Id keyword, revision history cleaned up
52	!
53	! Revision 1.63 2006/08/22 13:53:13 raasch
54	! Output of dz_max
55	!
56	! Revision 1.1 1997/08/11 06:17:20 raasch
57	! Initial revision
58	!
59	!
60	! Description:
61	! ------------
62	! Writing a header with all important informations about the actual run.
63	! This subroutine is called three times, two times at the beginning
64	! (writing information on files RUN_CONTROL and HEADER) and one time at the
65	! end of the run, then writing additional information about CPU-usage on file
66	! header.
67	!------------------------------------------------------------------------------!
68
69	USE arrays_3d
70	USE control_parameters
71	USE cloud_parameters
72	USE cpulog
73	USE dvrp_variables
74	USE grid_variables
75	USE indices
76	USE model_1d
77	USE particle_attributes
78	USE pegrid
79	USE spectrum
80
81	IMPLICIT NONE
82
83	CHARACTER (LEN=1) :: prec
84	CHARACTER (LEN=2) :: do2d_mode
85	CHARACTER (LEN=5) :: section_chr
86	CHARACTER (LEN=9) :: time_to_string
87	CHARACTER (LEN=10) :: coor_chr, host_chr
88	CHARACTER (LEN=16) :: begin_chr
89	CHARACTER (LEN=23) :: ver_rev
90	CHARACTER (LEN=40) :: output_format
91	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
92	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
93	run_classification
94	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
95	temperatures, ugcomponent, vgcomponent
96	CHARACTER (LEN=85) :: roben, runten
97
98	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
99	REAL :: cpuseconds_per_simulated_second
100
101	!
102	!-- Open the output file. At the end of the simulation, output is directed
103	!-- to unit 19.
104	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
105	.NOT. simulated_time_at_begin /= simulated_time ) THEN
106	io = 15 ! header output on file RUN_CONTROL
107	ELSE
108	io = 19 ! header output on file HEADER
109	ENDIF
110	CALL check_open( io )
111
112	!
113	!-- At the end of the run, output file (HEADER) will be rewritten with
114	!-- new informations
115	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
116
117	!
118	!-- Determine kind of model run
119	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
120	run_classification = '3D - restart run'
121	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
122	run_classification = '3D - run using 3D - prerun data'
123	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
124	run_classification = '3D - run without 1D - prerun'
125	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
126	run_classification = '3D - run with 1D - prerun'
127	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
128	run_classification = '3D - run initialized by user'
129	ELSE
130	PRINT*,'+++ header: unknown action(s): ',initializing_actions
131	ENDIF
132	IF ( ocean ) THEN
133	run_classification = 'ocean - ' // run_classification
134	ELSE
135	run_classification = 'atmosphere - ' // run_classification
136	ENDIF
137
138	!
139	!-- Run-identification, date, time, host
140	host_chr = host(1:10)
141	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
142	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
143	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
144	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
145	ADJUSTR( host_chr )
146	#if defined( __parallel )
147	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
148	char1 = 'calculated'
149	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
150	host(1:2) == 'lc' ) .AND. &
151	npex == -1 .AND. pdims(2) == 1 ) THEN
152	char1 = 'forced'
153	ELSE
154	char1 = 'predefined'
155	ENDIF
156	IF ( threads_per_task == 1 ) THEN
157	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
158	ELSE
159	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
160	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
161	ENDIF
162	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
163	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
164	npex == -1 .AND. pdims(2) == 1 ) &
165	THEN
166	WRITE ( io, 106 )
167	ELSEIF ( pdims(2) == 1 ) THEN
168	WRITE ( io, 107 ) 'x'
169	ELSEIF ( pdims(1) == 1 ) THEN
170	WRITE ( io, 107 ) 'y'
171	ENDIF
172	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
173	#endif
174	WRITE ( io, 99 )
175
176	!
177	!-- Numerical schemes
178	WRITE ( io, 110 )
179	IF ( psolver(1:7) == 'poisfft' ) THEN
180	WRITE ( io, 111 ) TRIM( fft_method )
181	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
182	ELSEIF ( psolver == 'sor' ) THEN
183	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
184	ELSEIF ( psolver == 'multigrid' ) THEN
185	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
186	IF ( mg_cycles == -1 ) THEN
187	WRITE ( io, 140 ) residual_limit
188	ELSE
189	WRITE ( io, 141 ) mg_cycles
190	ENDIF
191	IF ( mg_switch_to_pe0_level == 0 ) THEN
192	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
193	nzt_mg(1)
194	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
195	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
196	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
197	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
198	nzt_mg(mg_switch_to_pe0_level), &
199	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
200	nzt_mg(1)
201	ENDIF
202	ENDIF
203	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
204	THEN
205	WRITE ( io, 142 )
206	ENDIF
207
208	IF ( momentum_advec == 'pw-scheme' ) THEN
209	WRITE ( io, 113 )
210	ELSE
211	WRITE ( io, 114 )
212	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
213	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
214	overshoot_limit_w /= 0.0 ) THEN
215	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
216	overshoot_limit_w
217	ENDIF
218	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
219	ups_limit_w /= 0.0 ) &
220	THEN
221	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
222	ENDIF
223	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
224	ENDIF
225	IF ( scalar_advec == 'pw-scheme' ) THEN
226	WRITE ( io, 116 )
227	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
228	WRITE ( io, 117 )
229	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
230	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
231	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
232	ENDIF
233	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
234	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
235	ENDIF
236	ELSE
237	WRITE ( io, 118 )
238	ENDIF
239
240	WRITE ( io, 139 ) TRIM( loop_optimization )
241
242	IF ( galilei_transformation ) THEN
243	IF ( use_ug_for_galilei_tr ) THEN
244	char1 = 'geostrophic wind'
245	ELSE
246	char1 = 'mean wind in model domain'
247	ENDIF
248	IF ( simulated_time_at_begin == simulated_time ) THEN
249	char2 = 'at the start of the run'
250	ELSE
251	char2 = 'at the end of the run'
252	ENDIF
253	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
254	advected_distance_x/1000.0, advected_distance_y/1000.0
255	ENDIF
256	IF ( timestep_scheme == 'leapfrog' ) THEN
257	WRITE ( io, 120 )
258	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
259	WRITE ( io, 121 )
260	ELSE
261	WRITE ( io, 122 ) timestep_scheme
262	ENDIF
263	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
264	IF ( rayleigh_damping_factor /= 0.0 ) THEN
265	IF ( .NOT. ocean ) THEN
266	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
267	rayleigh_damping_factor
268	ELSE
269	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
270	rayleigh_damping_factor
271	ENDIF
272	ENDIF
273	IF ( humidity ) THEN
274	IF ( .NOT. cloud_physics ) THEN
275	WRITE ( io, 129 )
276	ELSE
277	WRITE ( io, 130 )
278	WRITE ( io, 131 )
279	IF ( radiation ) WRITE ( io, 132 )
280	IF ( precipitation ) WRITE ( io, 133 )
281	ENDIF
282	ENDIF
283	IF ( passive_scalar ) WRITE ( io, 134 )
284	IF ( conserve_volume_flow ) WRITE ( io, 150 )
285	WRITE ( io, 99 )
286
287	!
288	!-- Runtime and timestep informations
289	WRITE ( io, 200 )
290	IF ( .NOT. dt_fixed ) THEN
291	WRITE ( io, 201 ) dt_max, cfl_factor
292	ELSE
293	WRITE ( io, 202 ) dt
294	ENDIF
295	WRITE ( io, 203 ) simulated_time_at_begin, end_time
296
297	IF ( time_restart /= 9999999.9 .AND. &
298	simulated_time_at_begin == simulated_time ) THEN
299	IF ( dt_restart == 9999999.9 ) THEN
300	WRITE ( io, 204 ) ' Restart at: ',time_restart
301	ELSE
302	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
303	ENDIF
304	ENDIF
305
306	IF ( simulated_time_at_begin /= simulated_time ) THEN
307	i = MAX ( log_point_s(10)%counts, 1 )
308	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
309	cpuseconds_per_simulated_second = 0.0
310	ELSE
311	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
312	( simulated_time - &
313	simulated_time_at_begin )
314	ENDIF
315	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
316	log_point_s(10)%sum / REAL( i ), &
317	cpuseconds_per_simulated_second
318	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
319	IF ( dt_restart == 9999999.9 ) THEN
320	WRITE ( io, 204 ) ' Next restart at: ',time_restart
321	ELSE
322	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
323	ENDIF
324	ENDIF
325	ENDIF
326
327	!
328	!-- Computational grid
329	IF ( .NOT. ocean ) THEN
330	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
331	IF ( dz_stretch_level_index < nzt+1 ) THEN
332	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
333	dz_stretch_factor, dz_max
334	ENDIF
335	ELSE
336	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
337	IF ( dz_stretch_level_index > 0 ) THEN
338	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
339	dz_stretch_factor, dz_max
340	ENDIF
341	ENDIF
342	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
343	MIN( nnz+2, nzt+2 )
344	IF ( numprocs > 1 ) THEN
345	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
346	WRITE ( io, 255 )
347	ELSE
348	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
349	ENDIF
350	ENDIF
351	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
352
353	!
354	!-- Topography
355	WRITE ( io, 270 ) topography
356	SELECT CASE ( TRIM( topography ) )
357
358	CASE ( 'flat' )
359	! no actions necessary
360
361	CASE ( 'single_building' )
362	blx = INT( building_length_x / dx )
363	bly = INT( building_length_y / dy )
364	bh = INT( building_height / dz )
365
366	IF ( building_wall_left == 9999999.9 ) THEN
367	building_wall_left = ( nx + 1 - blx ) / 2 * dx
368	ENDIF
369	bxl = INT ( building_wall_left / dx + 0.5 )
370	bxr = bxl + blx
371
372	IF ( building_wall_south == 9999999.9 ) THEN
373	building_wall_south = ( ny + 1 - bly ) / 2 * dy
374	ENDIF
375	bys = INT ( building_wall_south / dy + 0.5 )
376	byn = bys + bly
377
378	WRITE ( io, 271 ) building_length_x, building_length_y, &
379	building_height, bxl, bxr, bys, byn
380
381	END SELECT
382
383	IF ( plant_canopy ) THEN
384
385	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
386	IF ( passive_scalar ) THEN
387	WRITE ( io, 281 ) scalar_exchange_coefficient, &
388	leaf_surface_concentration
389	ENDIF
390
391	!
392	!-- Heat flux at the top of vegetation
393	WRITE ( io, 282 ) cthf
394
395	!
396	!-- Leaf area density profile
397	!-- Building output strings, starting with surface value
398	WRITE ( learde, '(F6.2)' ) lad_surface
399	gradients = '------'
400	slices = ' 0'
401	coordinates = ' 0.0'
402	i = 1
403	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
404
405	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
406	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
407
408	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
409	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
410
411	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
412	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
413
414	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
415	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
416
417	i = i + 1
418	ENDDO
419
420	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
421	TRIM( gradients ), TRIM( slices )
422
423	ENDIF
424
425	!
426	!-- Boundary conditions
427	IF ( ibc_p_b == 0 ) THEN
428	runten = 'p(0) = 0 \|'
429	ELSEIF ( ibc_p_b == 1 ) THEN
430	runten = 'p(0) = p(1) \|'
431	ELSE
432	runten = 'p(0) = p(1) +R\|'
433	ENDIF
434	IF ( ibc_p_t == 0 ) THEN
435	roben = 'p(nzt+1) = 0 \|'
436	ELSE
437	roben = 'p(nzt+1) = p(nzt) \|'
438	ENDIF
439
440	IF ( ibc_uv_b == 0 ) THEN
441	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
442	ELSE
443	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
444	ENDIF
445	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
446	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
447	ELSEIF ( ibc_uv_t == 0 ) THEN
448	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
449	ELSE
450	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
451	ENDIF
452
453	IF ( ibc_pt_b == 0 ) THEN
454	runten = TRIM( runten ) // ' pt(0) = pt_surface'
455	ELSEIF ( ibc_pt_b == 1 ) THEN
456	runten = TRIM( runten ) // ' pt(0) = pt(1)'
457	ELSEIF ( ibc_pt_b == 2 ) THEN
458	runten = TRIM( runten ) // ' pt(0) = from coupled model'
459	ENDIF
460	IF ( ibc_pt_t == 0 ) THEN
461	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
462	ELSEIF( ibc_pt_t == 1 ) THEN
463	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
464	ELSEIF( ibc_pt_t == 2 ) THEN
465	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
466	ENDIF
467
468	WRITE ( io, 300 ) runten, roben
469
470	IF ( .NOT. constant_diffusion ) THEN
471	IF ( ibc_e_b == 1 ) THEN
472	runten = 'e(0) = e(1)'
473	ELSE
474	runten = 'e(0) = e(1) = (u/0.1)*2'
475	ENDIF
476	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
477
478	WRITE ( io, 301 ) 'e', runten, roben
479
480	ENDIF
481
482	IF ( ocean ) THEN
483	runten = 'sa(0) = sa(1)'
484	IF ( ibc_sa_t == 0 ) THEN
485	roben = 'sa(nzt+1) = sa_surface'
486	ELSE
487	roben = 'sa(nzt+1) = sa(nzt)'
488	ENDIF
489	WRITE ( io, 301 ) 'sa', runten, roben
490	ENDIF
491
492	IF ( humidity ) THEN
493	IF ( ibc_q_b == 0 ) THEN
494	runten = 'q(0) = q_surface'
495	ELSE
496	runten = 'q(0) = q(1)'
497	ENDIF
498	IF ( ibc_q_t == 0 ) THEN
499	roben = 'q(nzt) = q_top'
500	ELSE
501	roben = 'q(nzt) = q(nzt-1) + dq/dz'
502	ENDIF
503	WRITE ( io, 301 ) 'q', runten, roben
504	ENDIF
505
506	IF ( passive_scalar ) THEN
507	IF ( ibc_q_b == 0 ) THEN
508	runten = 's(0) = s_surface'
509	ELSE
510	runten = 's(0) = s(1)'
511	ENDIF
512	IF ( ibc_q_t == 0 ) THEN
513	roben = 's(nzt) = s_top'
514	ELSE
515	roben = 's(nzt) = s(nzt-1) + ds/dz'
516	ENDIF
517	WRITE ( io, 301 ) 's', runten, roben
518	ENDIF
519
520	IF ( use_surface_fluxes ) THEN
521	WRITE ( io, 303 )
522	IF ( constant_heatflux ) THEN
523	WRITE ( io, 306 ) surface_heatflux
524	IF ( random_heatflux ) WRITE ( io, 307 )
525	ENDIF
526	IF ( humidity .AND. constant_waterflux ) THEN
527	WRITE ( io, 311 ) surface_waterflux
528	ENDIF
529	IF ( passive_scalar .AND. constant_waterflux ) THEN
530	WRITE ( io, 313 ) surface_waterflux
531	ENDIF
532	ENDIF
533
534	IF ( use_top_fluxes ) THEN
535	WRITE ( io, 304 )
536	IF ( coupling_mode == 'uncoupled' ) THEN
537	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
538	IF ( constant_top_heatflux ) THEN
539	WRITE ( io, 306 ) top_heatflux
540	ENDIF
541	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
542	WRITE ( io, 316 )
543	ENDIF
544	IF ( ocean .AND. constant_top_salinityflux ) THEN
545	WRITE ( io, 309 ) top_salinityflux
546	ENDIF
547	IF ( humidity .OR. passive_scalar ) THEN
548	WRITE ( io, 315 )
549	ENDIF
550	ENDIF
551
552	IF ( prandtl_layer ) THEN
553	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
554	rif_min, rif_max
555	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
556	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
557	WRITE ( io, 312 )
558	ENDIF
559	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
560	WRITE ( io, 314 )
561	ENDIF
562	ELSE
563	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
564	WRITE ( io, 310 ) rif_min, rif_max
565	ENDIF
566	ENDIF
567
568	WRITE ( io, 317 ) bc_lr, bc_ns
569	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
570	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
571	IF ( turbulent_inflow ) THEN
572	WRITE ( io, 319 ) recycling_width, recycling_plane, &
573	inflow_damping_height, inflow_damping_width
574	ENDIF
575	ENDIF
576
577	!
578	!-- Listing of 1D-profiles
579	WRITE ( io, 325 ) dt_dopr_listing
580	IF ( averaging_interval_pr /= 0.0 ) THEN
581	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
582	ENDIF
583
584	!
585	!-- DATA output
586	WRITE ( io, 330 )
587	IF ( averaging_interval_pr /= 0.0 ) THEN
588	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
589	ENDIF
590
591	!
592	!-- 1D-profiles
593	dopr_chr = 'Profile:'
594	IF ( dopr_n /= 0 ) THEN
595	WRITE ( io, 331 )
596
597	output_format = ''
598	IF ( netcdf_output ) THEN
599	IF ( netcdf_64bit ) THEN
600	output_format = 'netcdf (64 bit offset)'
601	ELSE
602	output_format = 'netcdf'
603	ENDIF
604	ENDIF
605	IF ( profil_output ) THEN
606	IF ( netcdf_output ) THEN
607	output_format = TRIM( output_format ) // ' and profil'
608	ELSE
609	output_format = 'profil'
610	ENDIF
611	ENDIF
612	WRITE ( io, 345 ) output_format
613
614	DO i = 1, dopr_n
615	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
616	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
617	WRITE ( io, 332 ) dopr_chr
618	dopr_chr = ' :'
619	ENDIF
620	ENDDO
621
622	IF ( dopr_chr /= '' ) THEN
623	WRITE ( io, 332 ) dopr_chr
624	ENDIF
625	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
626	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
627	ENDIF
628
629	!
630	!-- 2D-arrays
631	DO av = 0, 1
632
633	i = 1
634	do2d_xy = ''
635	do2d_xz = ''
636	do2d_yz = ''
637	DO WHILE ( do2d(av,i) /= ' ' )
638
639	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
640	do2d_mode = do2d(av,i)(l-1:l)
641
642	SELECT CASE ( do2d_mode )
643	CASE ( 'xy' )
644	ll = LEN_TRIM( do2d_xy )
645	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
646	CASE ( 'xz' )
647	ll = LEN_TRIM( do2d_xz )
648	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
649	CASE ( 'yz' )
650	ll = LEN_TRIM( do2d_yz )
651	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
652	END SELECT
653
654	i = i + 1
655
656	ENDDO
657
658	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
659	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
660	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
661	( netcdf_output .OR. iso2d_output ) ) THEN
662
663	IF ( av == 0 ) THEN
664	WRITE ( io, 334 ) ''
665	ELSE
666	WRITE ( io, 334 ) '(time-averaged)'
667	ENDIF
668
669	IF ( do2d_at_begin ) THEN
670	begin_chr = 'and at the start'
671	ELSE
672	begin_chr = ''
673	ENDIF
674
675	output_format = ''
676	IF ( netcdf_output ) THEN
677	IF ( netcdf_64bit ) THEN
678	output_format = 'netcdf (64 bit offset)'
679	ELSE
680	output_format = 'netcdf'
681	ENDIF
682	ENDIF
683	IF ( iso2d_output ) THEN
684	IF ( netcdf_output ) THEN
685	output_format = TRIM( output_format ) // ' and iso2d'
686	ELSE
687	output_format = 'iso2d'
688	ENDIF
689	ENDIF
690	WRITE ( io, 345 ) output_format
691
692	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
693	i = 1
694	slices = '/'
695	coordinates = '/'
696	!
697	!-- Building strings with index and coordinate informations of the
698	!-- slices
699	DO WHILE ( section(i,1) /= -9999 )
700
701	WRITE (section_chr,'(I5)') section(i,1)
702	section_chr = ADJUSTL( section_chr )
703	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
704
705	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
706	coor_chr = ADJUSTL( coor_chr )
707	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
708
709	i = i + 1
710	ENDDO
711	IF ( av == 0 ) THEN
712	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
713	TRIM( begin_chr ), 'k', TRIM( slices ), &
714	TRIM( coordinates )
715	IF ( skip_time_do2d_xy /= 0.0 ) THEN
716	WRITE ( io, 339 ) skip_time_do2d_xy
717	ENDIF
718	ELSE
719	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
720	TRIM( begin_chr ), averaging_interval, &
721	dt_averaging_input, 'k', TRIM( slices ), &
722	TRIM( coordinates )
723	IF ( skip_time_data_output_av /= 0.0 ) THEN
724	WRITE ( io, 339 ) skip_time_data_output_av
725	ENDIF
726	ENDIF
727
728	ENDIF
729
730	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
731	i = 1
732	slices = '/'
733	coordinates = '/'
734	!
735	!-- Building strings with index and coordinate informations of the
736	!-- slices
737	DO WHILE ( section(i,2) /= -9999 )
738
739	WRITE (section_chr,'(I5)') section(i,2)
740	section_chr = ADJUSTL( section_chr )
741	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
742
743	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
744	coor_chr = ADJUSTL( coor_chr )
745	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
746
747	i = i + 1
748	ENDDO
749	IF ( av == 0 ) THEN
750	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
751	TRIM( begin_chr ), 'j', TRIM( slices ), &
752	TRIM( coordinates )
753	IF ( skip_time_do2d_xz /= 0.0 ) THEN
754	WRITE ( io, 339 ) skip_time_do2d_xz
755	ENDIF
756	ELSE
757	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
758	TRIM( begin_chr ), averaging_interval, &
759	dt_averaging_input, 'j', TRIM( slices ), &
760	TRIM( coordinates )
761	IF ( skip_time_data_output_av /= 0.0 ) THEN
762	WRITE ( io, 339 ) skip_time_data_output_av
763	ENDIF
764	ENDIF
765	ENDIF
766
767	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
768	i = 1
769	slices = '/'
770	coordinates = '/'
771	!
772	!-- Building strings with index and coordinate informations of the
773	!-- slices
774	DO WHILE ( section(i,3) /= -9999 )
775
776	WRITE (section_chr,'(I5)') section(i,3)
777	section_chr = ADJUSTL( section_chr )
778	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
779
780	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
781	coor_chr = ADJUSTL( coor_chr )
782	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
783
784	i = i + 1
785	ENDDO
786	IF ( av == 0 ) THEN
787	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
788	TRIM( begin_chr ), 'i', TRIM( slices ), &
789	TRIM( coordinates )
790	IF ( skip_time_do2d_yz /= 0.0 ) THEN
791	WRITE ( io, 339 ) skip_time_do2d_yz
792	ENDIF
793	ELSE
794	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
795	TRIM( begin_chr ), averaging_interval, &
796	dt_averaging_input, 'i', TRIM( slices ), &
797	TRIM( coordinates )
798	IF ( skip_time_data_output_av /= 0.0 ) THEN
799	WRITE ( io, 339 ) skip_time_data_output_av
800	ENDIF
801	ENDIF
802	ENDIF
803
804	ENDIF
805
806	ENDDO
807
808	!
809	!-- 3d-arrays
810	DO av = 0, 1
811
812	i = 1
813	do3d_chr = ''
814	DO WHILE ( do3d(av,i) /= ' ' )
815
816	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
817	i = i + 1
818
819	ENDDO
820
821	IF ( do3d_chr /= '' ) THEN
822	IF ( av == 0 ) THEN
823	WRITE ( io, 336 ) ''
824	ELSE
825	WRITE ( io, 336 ) '(time-averaged)'
826	ENDIF
827
828	output_format = ''
829	IF ( netcdf_output ) THEN
830	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
831	output_format = 'netcdf (64 bit offset)'
832	ELSE
833	output_format = 'netcdf'
834	ENDIF
835	ENDIF
836	IF ( avs_output ) THEN
837	IF ( netcdf_output ) THEN
838	output_format = TRIM( output_format ) // ' and avs'
839	ELSE
840	output_format = 'avs'
841	ENDIF
842	ENDIF
843	WRITE ( io, 345 ) output_format
844
845	IF ( do3d_at_begin ) THEN
846	begin_chr = 'and at the start'
847	ELSE
848	begin_chr = ''
849	ENDIF
850	IF ( av == 0 ) THEN
851	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
852	zu(nz_do3d), nz_do3d
853	ELSE
854	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
855	TRIM( begin_chr ), averaging_interval, &
856	dt_averaging_input, zu(nz_do3d), nz_do3d
857	ENDIF
858
859	IF ( do3d_compress ) THEN
860	do3d_chr = ''
861	i = 1
862	DO WHILE ( do3d(av,i) /= ' ' )
863
864	SELECT CASE ( do3d(av,i) )
865	CASE ( 'u' )
866	j = 1
867	CASE ( 'v' )
868	j = 2
869	CASE ( 'w' )
870	j = 3
871	CASE ( 'p' )
872	j = 4
873	CASE ( 'pt' )
874	j = 5
875	END SELECT
876	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
877	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
878	':' // prec // ','
879	i = i + 1
880
881	ENDDO
882	WRITE ( io, 338 ) do3d_chr
883
884	ENDIF
885
886	IF ( av == 0 ) THEN
887	IF ( skip_time_do3d /= 0.0 ) THEN
888	WRITE ( io, 339 ) skip_time_do3d
889	ENDIF
890	ELSE
891	IF ( skip_time_data_output_av /= 0.0 ) THEN
892	WRITE ( io, 339 ) skip_time_data_output_av
893	ENDIF
894	ENDIF
895
896	ENDIF
897
898	ENDDO
899
900	!
901	!-- Timeseries
902	IF ( dt_dots /= 9999999.9 ) THEN
903	WRITE ( io, 340 )
904
905	output_format = ''
906	IF ( netcdf_output ) THEN
907	IF ( netcdf_64bit ) THEN
908	output_format = 'netcdf (64 bit offset)'
909	ELSE
910	output_format = 'netcdf'
911	ENDIF
912	ENDIF
913	IF ( profil_output ) THEN
914	IF ( netcdf_output ) THEN
915	output_format = TRIM( output_format ) // ' and profil'
916	ELSE
917	output_format = 'profil'
918	ENDIF
919	ENDIF
920	WRITE ( io, 345 ) output_format
921	WRITE ( io, 341 ) dt_dots
922	ENDIF
923
924	#if defined( __dvrp_graphics )
925	!
926	!-- Dvrp-output
927	IF ( dt_dvrp /= 9999999.9 ) THEN
928	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
929	TRIM( dvrp_username ), TRIM( dvrp_directory )
930	i = 1
931	l = 0
932	DO WHILE ( mode_dvrp(i) /= ' ' )
933	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
934	READ ( mode_dvrp(i), '(10X,I2)' ) j
935	l = l + 1
936	IF ( do3d(0,j) /= ' ' ) THEN
937	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
938	ENDIF
939	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
940	READ ( mode_dvrp(i), '(6X,I2)' ) j
941	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
942	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
943	WRITE ( io, 363 )
944	ENDIF
945	i = i + 1
946	ENDDO
947	ENDIF
948	#endif
949
950	#if defined( __spectra )
951	!
952	!-- Spectra output
953	IF ( dt_dosp /= 9999999.9 ) THEN
954	WRITE ( io, 370 )
955
956	output_format = ''
957	IF ( netcdf_output ) THEN
958	IF ( netcdf_64bit ) THEN
959	output_format = 'netcdf (64 bit offset)'
960	ELSE
961	output_format = 'netcdf'
962	ENDIF
963	ENDIF
964	IF ( profil_output ) THEN
965	IF ( netcdf_output ) THEN
966	output_format = TRIM( output_format ) // ' and profil'
967	ELSE
968	output_format = 'profil'
969	ENDIF
970	ENDIF
971	WRITE ( io, 345 ) output_format
972	WRITE ( io, 371 ) dt_dosp
973	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
974	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
975	( spectra_direction(i), i = 1,10 ), &
976	( comp_spectra_level(i), i = 1,100 ), &
977	( plot_spectra_level(i), i = 1,100 ), &
978	averaging_interval_sp, dt_averaging_input_pr
979	ENDIF
980	#endif
981
982	WRITE ( io, 99 )
983
984	!
985	!-- Physical quantities
986	WRITE ( io, 400 )
987
988	!
989	!-- Geostrophic parameters
990	WRITE ( io, 410 ) omega, phi, f, fs
991
992	!
993	!-- Other quantities
994	WRITE ( io, 411 ) g
995	IF ( use_reference ) THEN
996	IF ( ocean ) THEN
997	WRITE ( io, 412 ) prho_reference
998	ELSE
999	WRITE ( io, 413 ) pt_reference
1000	ENDIF
1001	ENDIF
1002
1003	!
1004	!-- Cloud physics parameters
1005	IF ( cloud_physics ) THEN
1006	WRITE ( io, 415 )
1007	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1008	ENDIF
1009
1010	!-- Profile of the geostrophic wind (component ug)
1011	!-- Building output strings
1012	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1013	gradients = '------'
1014	slices = ' 0'
1015	coordinates = ' 0.0'
1016	i = 1
1017	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1018
1019	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1020	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1021
1022	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1023	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1024
1025	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1026	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1027
1028	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1029	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1030
1031	i = i + 1
1032	ENDDO
1033
1034	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1035	TRIM( gradients ), TRIM( slices )
1036
1037	!-- Profile of the geostrophic wind (component vg)
1038	!-- Building output strings
1039	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1040	gradients = '------'
1041	slices = ' 0'
1042	coordinates = ' 0.0'
1043	i = 1
1044	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1045
1046	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1047	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1048
1049	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1050	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1051
1052	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1053	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1054
1055	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1056	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1057
1058	i = i + 1
1059	ENDDO
1060
1061	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1062	TRIM( gradients ), TRIM( slices )
1063
1064	!
1065	!-- Initial temperature profile
1066	!-- Building output strings, starting with surface temperature
1067	WRITE ( temperatures, '(F6.2)' ) pt_surface
1068	gradients = '------'
1069	slices = ' 0'
1070	coordinates = ' 0.0'
1071	i = 1
1072	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1073
1074	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1075	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1076
1077	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1078	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1079
1080	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1081	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1082
1083	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1084	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1085
1086	i = i + 1
1087	ENDDO
1088
1089	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1090	TRIM( gradients ), TRIM( slices )
1091
1092	!
1093	!-- Initial humidity profile
1094	!-- Building output strings, starting with surface humidity
1095	IF ( humidity .OR. passive_scalar ) THEN
1096	WRITE ( temperatures, '(E8.1)' ) q_surface
1097	gradients = '--------'
1098	slices = ' 0'
1099	coordinates = ' 0.0'
1100	i = 1
1101	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1102
1103	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1104	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1105
1106	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1107	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1108
1109	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1110	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1111
1112	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1113	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1114
1115	i = i + 1
1116	ENDDO
1117
1118	IF ( humidity ) THEN
1119	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1120	TRIM( gradients ), TRIM( slices )
1121	ELSE
1122	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1123	TRIM( gradients ), TRIM( slices )
1124	ENDIF
1125	ENDIF
1126
1127	!
1128	!-- Initial salinity profile
1129	!-- Building output strings, starting with surface salinity
1130	IF ( ocean ) THEN
1131	WRITE ( temperatures, '(F6.2)' ) sa_surface
1132	gradients = '------'
1133	slices = ' 0'
1134	coordinates = ' 0.0'
1135	i = 1
1136	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1137
1138	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1139	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1140
1141	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1142	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1143
1144	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1145	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1146
1147	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1148	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1149
1150	i = i + 1
1151	ENDDO
1152
1153	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1154	TRIM( gradients ), TRIM( slices )
1155	ENDIF
1156
1157	!
1158	!-- LES / turbulence parameters
1159	WRITE ( io, 450 )
1160
1161	!--
1162	! ... LES-constants used must still be added here
1163	!--
1164	IF ( constant_diffusion ) THEN
1165	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1166	prandtl_number
1167	ENDIF
1168	IF ( .NOT. constant_diffusion) THEN
1169	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1170	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1171	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1172	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1173	ENDIF
1174
1175	!
1176	!-- Special actions during the run
1177	WRITE ( io, 470 )
1178	IF ( create_disturbances ) THEN
1179	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1180	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1181	zu(disturbance_level_ind_t), disturbance_level_ind_t
1182	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1183	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1184	ELSE
1185	WRITE ( io, 473 ) disturbance_energy_limit
1186	ENDIF
1187	WRITE ( io, 474 ) TRIM( random_generator )
1188	ENDIF
1189	IF ( pt_surface_initial_change /= 0.0 ) THEN
1190	WRITE ( io, 475 ) pt_surface_initial_change
1191	ENDIF
1192	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1193	WRITE ( io, 476 ) q_surface_initial_change
1194	ENDIF
1195	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1196	WRITE ( io, 477 ) q_surface_initial_change
1197	ENDIF
1198
1199	IF ( particle_advection ) THEN
1200	!
1201	!-- Particle attributes
1202	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1203	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1204	end_time_prel, dt_sort_particles
1205	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1206	IF ( random_start_position ) WRITE ( io, 481 )
1207	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1208	WRITE ( io, 495 ) total_number_of_particles
1209	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1210	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1211	WRITE ( io, 483 ) maximum_number_of_tailpoints
1212	IF ( minimum_tailpoint_distance /= 0 ) THEN
1213	WRITE ( io, 484 ) total_number_of_tails, &
1214	minimum_tailpoint_distance, &
1215	maximum_tailpoint_age
1216	ENDIF
1217	ENDIF
1218	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1219	WRITE ( io, 485 ) dt_write_particle_data
1220	output_format = ''
1221	IF ( netcdf_output ) THEN
1222	IF ( netcdf_64bit ) THEN
1223	output_format = 'netcdf (64 bit offset) and binary'
1224	ELSE
1225	output_format = 'netcdf and binary'
1226	ENDIF
1227	ELSE
1228	output_format = 'binary'
1229	ENDIF
1230	WRITE ( io, 345 ) output_format
1231	ENDIF
1232	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1233	IF ( write_particle_statistics ) WRITE ( io, 486 )
1234
1235	WRITE ( io, 487 ) number_of_particle_groups
1236
1237	DO i = 1, number_of_particle_groups
1238	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1239	WRITE ( io, 490 ) i, 0.0
1240	WRITE ( io, 492 )
1241	ELSE
1242	WRITE ( io, 490 ) i, radius(i)
1243	IF ( density_ratio(i) /= 0.0 ) THEN
1244	WRITE ( io, 491 ) density_ratio(i)
1245	ELSE
1246	WRITE ( io, 492 )
1247	ENDIF
1248	ENDIF
1249	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1250	pdx(i), pdy(i), pdz(i)
1251	ENDDO
1252
1253	ENDIF
1254
1255
1256	!
1257	!-- Parameters of 1D-model
1258	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1259	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1260	mixing_length_1d, dissipation_1d
1261	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1262	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1263	ENDIF
1264	ENDIF
1265
1266	!
1267	!-- User-defined informations
1268	CALL user_header( io )
1269
1270	WRITE ( io, 99 )
1271
1272	!
1273	!-- Write buffer contents to disc immediately
1274	CALL local_flush( io )
1275
1276	!
1277	!-- Here the FORMATs start
1278
1279	99 FORMAT (1X,78('-'))
1280	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1281	1X,'* ',A,' *',9X,A/ &
1282	1X,'***************************',9X,42('-'))
1283	101 FORMAT (37X,'coupled run: ',A/ &
1284	37X,42('-'))
1285	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1286	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1287	' Run on host: ',A10)
1288	#if defined( __parallel )
1289	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1290	')',1X,A)
1291	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1292	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1293	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1294	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1295	37X,'because the job is running on an SMP-cluster')
1296	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1297	#endif
1298	110 FORMAT (/' Numerical Schemes:'/ &
1299	' -----------------'/)
1300	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1301	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1302	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1303	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1304	' or Upstream')
1305	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1306	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1307	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1308	' or Upstream')
1309	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1310	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1311	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1312	' Translation velocity = ',A/ &
1313	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1314	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1315	' of timestep changes)')
1316	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1317	' timestep changes')
1318	122 FORMAT (' --> Time differencing scheme: ',A)
1319	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1320	' maximum damping coefficient: ',F5.3, ' 1/s')
1321	124 FORMAT (' Spline-overshoots are being suppressed')
1322	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1323	' of'/ &
1324	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1325	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1326	' of'/ &
1327	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1328	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1329	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1330	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1331	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1332	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1333	130 FORMAT (' --> Additional prognostic equation for the total water content')
1334	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1335	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1336	' effective emissivity scheme')
1337	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1338	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1339	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1340	A,'-cycle)'/ &
1341	' number of grid levels: ',I2/ &
1342	' Gauss-Seidel red/black iterations: ',I2)
1343	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1344	I3,')')
1345	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1346	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1347	I3,')'/ &
1348	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1349	I3,')')
1350	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1351	139 FORMAT (' --> Loop optimization method: ',A)
1352	140 FORMAT (' maximum residual allowed: ',E10.3)
1353	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1354	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1355	'step')
1356	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1357	'kinetic energy')
1358	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1359	'conserved')
1360	200 FORMAT (//' Run time and time step information:'/ &
1361	' ----------------------------------'/)
1362	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1363	' CFL-factor: ',F4.2)
1364	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1365	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1366	' End time: ',F9.3,' s')
1367	204 FORMAT ( A,F9.3,' s')
1368	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1369	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1370	' CPU-time used: ',F9.3,' s per timestep: ', &
1371	' ',F9.3,' s'/ &
1372	' per second of simulated tim', &
1373	'e: ',F9.3,' s')
1374	250 FORMAT (//' Computational grid and domain size:'/ &
1375	' ----------------------------------'// &
1376	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1377	' m dz = ',F7.3,' m'/ &
1378	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1379	' m z(u) = ',F10.3,' m'/)
1380	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1381	' factor: ',F5.3/ &
1382	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1383	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1384	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1385	255 FORMAT (' Subdomains have equal size')
1386	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1387	'have smaller sizes'/ &
1388	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1389	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1390	' degrees')
1391	270 FORMAT (//' Topography informations:'/ &
1392	' -----------------------'// &
1393	1X,'Topography: ',A)
1394	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1395	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1396	' / ',I4)
1397	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1398	' ------------------------------'// &
1399	' Canopy mode: ', A / &
1400	' Canopy top: ',I4 / &
1401	' Leaf drag coefficient: ',F6.2 /)
1402	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1403	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1404	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1405	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1406	' Height: ',A,' m'/ &
1407	' Leaf area density: ',A,' m2/m3'/ &
1408	' Gradient: ',A,' m2/m4'/ &
1409	' Gridpoint: ',A)
1410
1411	300 FORMAT (//' Boundary conditions:'/ &
1412	' -------------------'// &
1413	' p uv ', &
1414	' pt'// &
1415	' B. bound.: ',A/ &
1416	' T. bound.: ',A)
1417	301 FORMAT (/' ',A// &
1418	' B. bound.: ',A/ &
1419	' T. bound.: ',A)
1420	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1421	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1422	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1423	'computational u,v-level:'// &
1424	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1425	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1426	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1427	307 FORMAT (' Heatflux has a random normal distribution')
1428	308 FORMAT (' Predefined surface temperature')
1429	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1430	310 FORMAT (//' 1D-Model:'// &
1431	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1432	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1433	312 FORMAT (' Predefined surface humidity')
1434	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1435	314 FORMAT (' Predefined scalar value at the surface')
1436	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1437	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1438	'atmosphere model')
1439	317 FORMAT (//' Lateral boundaries:'/ &
1440	' left/right: ',A/ &
1441	' north/south: ',A)
1442	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1443	'max =',F5.1,' m**2/s')
1444	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1445	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1446	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1447	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1448	' v: ',F9.6,' m2/s2')
1449	325 FORMAT (//' List output:'/ &
1450	' -----------'// &
1451	' 1D-Profiles:'/ &
1452	' Output every ',F8.2,' s')
1453	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1454	' Averaging input every ',F8.2,' s')
1455	330 FORMAT (//' Data output:'/ &
1456	' -----------'/)
1457	331 FORMAT (/' 1D-Profiles:')
1458	332 FORMAT (/' ',A)
1459	333 FORMAT (' Output every ',F8.2,' s',/ &
1460	' Time averaged over ',F8.2,' s'/ &
1461	' Averaging input every ',F8.2,' s')
1462	334 FORMAT (/' 2D-Arrays',A,':')
1463	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1464	' Output every ',F8.2,' s ',A/ &
1465	' Cross sections at ',A1,' = ',A/ &
1466	' scalar-coordinates: ',A,' m'/)
1467	336 FORMAT (/' 3D-Arrays',A,':')
1468	337 FORMAT (/' Arrays: ',A/ &
1469	' Output every ',F8.2,' s ',A/ &
1470	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1471	338 FORMAT (' Compressed data output'/ &
1472	' Decimal precision: ',A/)
1473	339 FORMAT (' No output during initial ',F8.2,' s')
1474	340 FORMAT (/' Time series:')
1475	341 FORMAT (' Output every ',F8.2,' s'/)
1476	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1477	' Output every ',F8.2,' s ',A/ &
1478	' Time averaged over ',F8.2,' s'/ &
1479	' Averaging input every ',F8.2,' s'/ &
1480	' Cross sections at ',A1,' = ',A/ &
1481	' scalar-coordinates: ',A,' m'/)
1482	343 FORMAT (/' Arrays: ',A/ &
1483	' Output every ',F8.2,' s ',A/ &
1484	' Time averaged over ',F8.2,' s'/ &
1485	' Averaging input every ',F8.2,' s'/ &
1486	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1487	345 FORMAT (' Output format: ',A/)
1488	#if defined( __dvrp_graphics )
1489	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1490	' Output every ',F7.1,' s'/ &
1491	' Output mode: ',A/ &
1492	' Host / User: ',A,' / ',A/ &
1493	' Directory: ',A// &
1494	' The sequence contains:')
1495	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1496	362 FORMAT (' Sectional plane ',A)
1497	363 FORMAT (' Particles')
1498	#endif
1499	#if defined( __spectra )
1500	370 FORMAT (' Spectra:')
1501	371 FORMAT (' Output every ',F7.1,' s'/)
1502	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1503	' Directions: ', 10(A5,',')/ &
1504	' height levels k = ', 20(I3,',')/ &
1505	' ', 20(I3,',')/ &
1506	' ', 20(I3,',')/ &
1507	' ', 20(I3,',')/ &
1508	' ', 19(I3,','),I3,'.'/ &
1509	' height levels selected for standard plot:'/ &
1510	' k = ', 20(I3,',')/ &
1511	' ', 20(I3,',')/ &
1512	' ', 20(I3,',')/ &
1513	' ', 20(I3,',')/ &
1514	' ', 19(I3,','),I3,'.'/ &
1515	' Time averaged over ', F7.1, ' s,' / &
1516	' Profiles for the time averaging are taken every ', &
1517	F6.1,' s')
1518	#endif
1519	400 FORMAT (//' Physical quantities:'/ &
1520	' -------------------'/)
1521	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1522	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1523	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1524	' f* = ',F9.6,' 1/s')
1525	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1526	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1527	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1528	415 FORMAT (/' Cloud physics parameters:'/ &
1529	' ------------------------'/)
1530	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1531	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1532	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1533	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1534	' Vapourization heat : L_v = ',E8.2,' J/kg')
1535	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1536	' Height: ',A,' m'/ &
1537	' Temperature: ',A,' K'/ &
1538	' Gradient: ',A,' K/100m'/ &
1539	' Gridpoint: ',A)
1540	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1541	' Height: ',A,' m'/ &
1542	' Humidity: ',A,' kg/kg'/ &
1543	' Gradient: ',A,' (kg/kg)/100m'/ &
1544	' Gridpoint: ',A)
1545	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1546	' Height: ',A,' m'/ &
1547	' Scalar concentration: ',A,' kg/m**3'/ &
1548	' Gradient: ',A,' (kg/m**3)/100m'/ &
1549	' Gridpoint: ',A)
1550	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1551	' Height: ',A,' m'/ &
1552	' ug: ',A,' m/s'/ &
1553	' Gradient: ',A,' 1/100s'/ &
1554	' Gridpoint: ',A)
1555	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1556	' Height: ',A,' m'/ &
1557	' vg: ',A,' m/s'/ &
1558	' Gradient: ',A,' 1/100s'/ &
1559	' Gridpoint: ',A)
1560	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1561	' Height: ',A,' m'/ &
1562	' Salinity: ',A,' psu'/ &
1563	' Gradient: ',A,' psu/100m'/ &
1564	' Gridpoint: ',A)
1565	450 FORMAT (//' LES / Turbulence quantities:'/ &
1566	' ---------------------------'/)
1567	451 FORMAT (' Diffusion coefficients are constant:'/ &
1568	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1569	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1570	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1571	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1572	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1573	470 FORMAT (//' Actions during the simulation:'/ &
1574	' -----------------------------'/)
1575	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1576	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1577	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1578	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1579	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1580	' to i/j =',I4)
1581	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1582	1X,F5.3, ' m2/s2')
1583	474 FORMAT (' Random number generator used : ',A/)
1584	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1585	'respectively, if'/ &
1586	' the value is negative) by ',F5.2,' K at the beginning of the',&
1587	' 3D-simulation'/)
1588	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1589	'respectively, if the'/ &
1590	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1591	' the 3D-simulation'/)
1592	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1593	'respectively, if the'/ &
1594	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1595	' the 3D-simulation'/)
1596	480 FORMAT (' Particles:'/ &
1597	' ---------'// &
1598	' Particle advection is active (switched on at t = ', F7.1, &
1599	' s)'/ &
1600	' Start of new particle generations every ',F6.1,' s'/ &
1601	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1602	' bottom: ', A, ' top: ', A/&
1603	' Maximum particle age: ',F9.1,' s'/ &
1604	' Advection stopped at t = ',F9.1,' s'/ &
1605	' Particles are sorted every ',F9.1,' s'/)
1606	481 FORMAT (' Particles have random start positions'/)
1607	482 FORMAT (' Particles are advected only horizontally'/)
1608	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1609	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1610	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1611	' Maximum age of the end of the tail: ',F8.2,' s')
1612	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1613	486 FORMAT (' Particle statistics are written on file'/)
1614	487 FORMAT (' Number of particle groups: ',I2/)
1615	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1616	' minimum timestep for advection: ', F7.5/)
1617	489 FORMAT (' Number of particles simultaneously released at each ', &
1618	'point: ', I5/)
1619	490 FORMAT (' Particle group ',I2,':'/ &
1620	' Particle radius: ',E10.3, 'm')
1621	491 FORMAT (' Particle inertia is activated'/ &
1622	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1623	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1624	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1625	' y:',F8.1,' - ',F8.1,' m'/&
1626	' z:',F8.1,' - ',F8.1,' m'/&
1627	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1628	' m dz = ',F8.1,' m'/)
1629	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1630	F8.2,' s'/)
1631	495 FORMAT (' Number of particles in total domain: ',I10/)
1632	500 FORMAT (//' 1D-Model parameters:'/ &
1633	' -------------------'// &
1634	' Simulation time: ',F8.1,' s'/ &
1635	' Run-controll output every: ',F8.1,' s'/ &
1636	' Vertical profile output every: ',F8.1,' s'/ &
1637	' Mixing length calculation: ',A/ &
1638	' Dissipation calculation: ',A/)
1639	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1640
1641
1642	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |