Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1018

Last change on this file since 1018 was 1017, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.0 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 1017 2012-09-27 11:28:50Z raasch $
11	!
12	! 1015 2012-09-27 09:23:24Z raasch
13	! output of Aajustment of mixing length to the Prandtl mixing length at first
14	! grid point above ground removed
15	!
16	! 1003 2012-09-14 14:35:53Z raasch
17	! output of information about equal/unequal subdomain size removed
18	!
19	! 1001 2012-09-13 14:08:46Z raasch
20	! all actions concerning leapfrog- and upstream-spline-scheme removed
21	!
22	! 978 2012-08-09 08:28:32Z fricke
23	! -km_damp_max, outflow_damping_width
24	! +pt_damping_factor, pt_damping_width
25	! +z0h
26	!
27	! 964 2012-07-26 09:14:24Z raasch
28	! output of profil-related quantities removed
29	!
30	! 940 2012-07-09 14:31:00Z raasch
31	! Output in case of simulations for pure neutral stratification (no pt-equation
32	! solved)
33	!
34	! 927 2012-06-06 19:15:04Z raasch
35	! output of masking_method for mg-solver
36	!
37	! 868 2012-03-28 12:21:07Z raasch
38	! translation velocity in Galilean transformation changed to 0.6 * ug
39	!
40	! 833 2012-02-22 08:55:55Z maronga
41	! Adjusted format for leaf area density
42	!
43	! 828 2012-02-21 12:00:36Z raasch
44	! output of dissipation_classes + radius_classes
45	!
46	! 825 2012-02-19 03:03:44Z raasch
47	! Output of cloud physics parameters/quantities complemented and restructured
48	!
49	! 767 2011-10-14 06:39:12Z raasch
50	! Output of given initial u,v-profiles
51	!
52	! 759 2011-09-15 13:58:31Z raasch
53	! output of maximum number of parallel io streams
54	!
55	! 707 2011-03-29 11:39:40Z raasch
56	! bc_lr/ns replaced by bc_lr/ns_cyc
57	!
58	! 667 2010-12-23 12:06:00Z suehring/gryschka
59	! Output of advection scheme.
60	! Modified output of Prandtl-layer height.
61	!
62	! 580 2010-10-05 13:59:11Z heinze
63	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
64	! ws_vertical_gradient_level to subs_vertical_gradient_level and
65	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
66	!
67	! 493 2010-03-01 08:30:24Z raasch
68	! NetCDF data output format extendend for NetCDF4/HDF5
69	!
70	! 449 2010-02-02 11:23:59Z raasch
71	! +large scale vertical motion (subsidence/ascent)
72	! Bugfix: index problem concerning gradient_level indices removed
73	!
74	! 410 2009-12-04 17:05:40Z letzel
75	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
76	! mask_scale\|_x\|y\|z, masks, skip_time_domask
77	!
78	! 346 2009-07-06 10:13:41Z raasch
79	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
80	! Coupling with independent precursor runs.
81	! Output of messages replaced by message handling routine.
82	! Output of several additional dvr parameters
83	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
84	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
85	! dp_smooth, dpdxy, u_bulk, v_bulk
86	! topography_grid_convention moved from user_header
87	! small bugfix concerning 3d 64bit netcdf output format
88	!
89	! 206 2008-10-13 14:59:11Z raasch
90	! Bugfix: error in zu index in case of section_xy = -1
91	!
92	! 198 2008-09-17 08:55:28Z raasch
93	! Format adjustments allowing output of larger revision numbers
94	!
95	! 197 2008-09-16 15:29:03Z raasch
96	! allow 100 spectra levels instead of 10 for consistency with
97	! define_netcdf_header,
98	! bugfix in the output of the characteristic levels of potential temperature,
99	! geostrophic wind, scalar concentration, humidity and leaf area density,
100	! output of turbulence recycling informations
101	!
102	! 138 2007-11-28 10:03:58Z letzel
103	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
104	! Allow two instead of one digit to specify isosurface and slicer variables.
105	! Output of sorting frequency of particles
106	!
107	! 108 2007-08-24 15:10:38Z letzel
108	! Output of informations for coupled model runs (boundary conditions etc.)
109	! + output of momentumfluxes at the top boundary
110	! Rayleigh damping for ocean, e_init
111	!
112	! 97 2007-06-21 08:23:15Z raasch
113	! Adjustments for the ocean version.
114	! use_pt_reference renamed use_reference
115	!
116	! 87 2007-05-22 15:46:47Z raasch
117	! Bugfix: output of use_upstream_for_tke
118	!
119	! 82 2007-04-16 15:40:52Z raasch
120	! Preprocessor strings for different linux clusters changed to "lc",
121	! routine local_flush is used for buffer flushing
122	!
123	! 76 2007-03-29 00:58:32Z raasch
124	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
125	! output of the loop optimization method, moisture renamed humidity,
126	! output of subversion revision number
127	!
128	! 19 2007-02-23 04:53:48Z raasch
129	! Output of scalar flux applied at top boundary
130	!
131	! RCS Log replace by Id keyword, revision history cleaned up
132	!
133	! Revision 1.63 2006/08/22 13:53:13 raasch
134	! Output of dz_max
135	!
136	! Revision 1.1 1997/08/11 06:17:20 raasch
137	! Initial revision
138	!
139	!
140	! Description:
141	! ------------
142	! Writing a header with all important informations about the actual run.
143	! This subroutine is called three times, two times at the beginning
144	! (writing information on files RUN_CONTROL and HEADER) and one time at the
145	! end of the run, then writing additional information about CPU-usage on file
146	! header.
147	!-----------------------------------------------------------------------------!
148
149	USE arrays_3d
150	USE control_parameters
151	USE cloud_parameters
152	USE cpulog
153	USE dvrp_variables
154	USE grid_variables
155	USE indices
156	USE model_1d
157	USE particle_attributes
158	USE pegrid
159	USE subsidence_mod
160	USE spectrum
161
162	IMPLICIT NONE
163
164	CHARACTER (LEN=1) :: prec
165	CHARACTER (LEN=2) :: do2d_mode
166	CHARACTER (LEN=5) :: section_chr
167	CHARACTER (LEN=9) :: time_to_string
168	CHARACTER (LEN=10) :: coor_chr, host_chr
169	CHARACTER (LEN=16) :: begin_chr
170	CHARACTER (LEN=23) :: ver_rev
171	CHARACTER (LEN=40) :: output_format
172	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
173	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
174	domask_chr, run_classification
175	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
176	temperatures, ugcomponent, vgcomponent
177	CHARACTER (LEN=85) :: roben, runten
178
179	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
180
181	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
182	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
183	REAL :: cpuseconds_per_simulated_second
184
185	!
186	!-- Open the output file. At the end of the simulation, output is directed
187	!-- to unit 19.
188	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
189	.NOT. simulated_time_at_begin /= simulated_time ) THEN
190	io = 15 ! header output on file RUN_CONTROL
191	ELSE
192	io = 19 ! header output on file HEADER
193	ENDIF
194	CALL check_open( io )
195
196	!
197	!-- At the end of the run, output file (HEADER) will be rewritten with
198	!-- new informations
199	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
200
201	!
202	!-- Determine kind of model run
203	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
204	run_classification = '3D - restart run'
205	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
206	run_classification = '3D - run with cyclic fill of 3D - prerun data'
207	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
208	run_classification = '3D - run without 1D - prerun'
209	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
210	run_classification = '3D - run with 1D - prerun'
211	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
212	run_classification = '3D - run initialized by user'
213	ELSE
214	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
215	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
216	ENDIF
217	IF ( ocean ) THEN
218	run_classification = 'ocean - ' // run_classification
219	ELSE
220	run_classification = 'atmosphere - ' // run_classification
221	ENDIF
222
223	!
224	!-- Run-identification, date, time, host
225	host_chr = host(1:10)
226	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
227	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
228	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
229	#if defined( __mpi2 )
230	mpi_type = 2
231	#else
232	mpi_type = 1
233	#endif
234	WRITE ( io, 101 ) mpi_type, coupling_mode
235	ENDIF
236	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
237	ADJUSTR( host_chr )
238	#if defined( __parallel )
239	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
240	char1 = 'calculated'
241	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
242	host(1:2) == 'lc' ) .AND. &
243	npex == -1 .AND. pdims(2) == 1 ) THEN
244	char1 = 'forced'
245	ELSE
246	char1 = 'predefined'
247	ENDIF
248	IF ( threads_per_task == 1 ) THEN
249	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
250	ELSE
251	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
252	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
253	ENDIF
254	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
255	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
256	npex == -1 .AND. pdims(2) == 1 ) &
257	THEN
258	WRITE ( io, 106 )
259	ELSEIF ( pdims(2) == 1 ) THEN
260	WRITE ( io, 107 ) 'x'
261	ELSEIF ( pdims(1) == 1 ) THEN
262	WRITE ( io, 107 ) 'y'
263	ENDIF
264	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
265	IF ( numprocs /= maximum_parallel_io_streams ) THEN
266	WRITE ( io, 108 ) maximum_parallel_io_streams
267	ENDIF
268	#endif
269	WRITE ( io, 99 )
270
271	!
272	!-- Numerical schemes
273	WRITE ( io, 110 )
274	IF ( psolver(1:7) == 'poisfft' ) THEN
275	WRITE ( io, 111 ) TRIM( fft_method )
276	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
277	ELSEIF ( psolver == 'sor' ) THEN
278	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
279	ELSEIF ( psolver == 'multigrid' ) THEN
280	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
281	IF ( mg_cycles == -1 ) THEN
282	WRITE ( io, 140 ) residual_limit
283	ELSE
284	WRITE ( io, 141 ) mg_cycles
285	ENDIF
286	IF ( mg_switch_to_pe0_level == 0 ) THEN
287	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
288	nzt_mg(1)
289	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
290	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
291	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
292	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
293	nzt_mg(mg_switch_to_pe0_level), &
294	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
295	nzt_mg(1)
296	ENDIF
297	IF ( masking_method ) WRITE ( io, 144 )
298	ENDIF
299	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
300	THEN
301	WRITE ( io, 142 )
302	ENDIF
303
304	IF ( momentum_advec == 'pw-scheme' ) THEN
305	WRITE ( io, 113 )
306	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
307	WRITE ( io, 503 )
308	ENDIF
309	IF ( scalar_advec == 'pw-scheme' ) THEN
310	WRITE ( io, 116 )
311	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
312	WRITE ( io, 504 )
313	ELSE
314	WRITE ( io, 118 )
315	ENDIF
316
317	WRITE ( io, 139 ) TRIM( loop_optimization )
318
319	IF ( galilei_transformation ) THEN
320	IF ( use_ug_for_galilei_tr ) THEN
321	char1 = '0.6 * geostrophic wind'
322	ELSE
323	char1 = 'mean wind in model domain'
324	ENDIF
325	IF ( simulated_time_at_begin == simulated_time ) THEN
326	char2 = 'at the start of the run'
327	ELSE
328	char2 = 'at the end of the run'
329	ENDIF
330	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
331	advected_distance_x/1000.0, advected_distance_y/1000.0
332	ENDIF
333	WRITE ( io, 122 ) timestep_scheme
334	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
335	IF ( rayleigh_damping_factor /= 0.0 ) THEN
336	IF ( .NOT. ocean ) THEN
337	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
338	rayleigh_damping_factor
339	ELSE
340	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
341	rayleigh_damping_factor
342	ENDIF
343	ENDIF
344	IF ( neutral ) WRITE ( io, 131 ) pt_surface
345	IF ( humidity ) THEN
346	IF ( .NOT. cloud_physics ) THEN
347	WRITE ( io, 129 )
348	ELSE
349	WRITE ( io, 130 )
350	ENDIF
351	ENDIF
352	IF ( passive_scalar ) WRITE ( io, 134 )
353	IF ( conserve_volume_flow ) THEN
354	WRITE ( io, 150 ) conserve_volume_flow_mode
355	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
356	WRITE ( io, 151 ) u_bulk, v_bulk
357	ENDIF
358	ELSEIF ( dp_external ) THEN
359	IF ( dp_smooth ) THEN
360	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
361	ELSE
362	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
363	ENDIF
364	ENDIF
365	IF ( large_scale_subsidence ) THEN
366	WRITE ( io, 153 )
367	WRITE ( io, 154 )
368	ENDIF
369	WRITE ( io, 99 )
370
371	!
372	!-- Runtime and timestep informations
373	WRITE ( io, 200 )
374	IF ( .NOT. dt_fixed ) THEN
375	WRITE ( io, 201 ) dt_max, cfl_factor
376	ELSE
377	WRITE ( io, 202 ) dt
378	ENDIF
379	WRITE ( io, 203 ) simulated_time_at_begin, end_time
380
381	IF ( time_restart /= 9999999.9 .AND. &
382	simulated_time_at_begin == simulated_time ) THEN
383	IF ( dt_restart == 9999999.9 ) THEN
384	WRITE ( io, 204 ) ' Restart at: ',time_restart
385	ELSE
386	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
387	ENDIF
388	ENDIF
389
390	IF ( simulated_time_at_begin /= simulated_time ) THEN
391	i = MAX ( log_point_s(10)%counts, 1 )
392	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
393	cpuseconds_per_simulated_second = 0.0
394	ELSE
395	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
396	( simulated_time - &
397	simulated_time_at_begin )
398	ENDIF
399	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
400	log_point_s(10)%sum / REAL( i ), &
401	cpuseconds_per_simulated_second
402	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
403	IF ( dt_restart == 9999999.9 ) THEN
404	WRITE ( io, 204 ) ' Next restart at: ',time_restart
405	ELSE
406	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
407	ENDIF
408	ENDIF
409	ENDIF
410
411	!
412	!-- Start time for coupled runs, if independent precursor runs for atmosphere
413	!-- and ocean are used. In this case, coupling_start_time defines the time
414	!-- when the coupling is switched on.
415	IF ( coupling_start_time /= 0.0 ) THEN
416	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
417	char1 = 'Precursor run for a coupled atmosphere-ocean run'
418	ELSE
419	char1 = 'Coupled atmosphere-ocean run following independent ' // &
420	'precursor runs'
421	ENDIF
422	WRITE ( io, 207 ) char1, coupling_start_time
423	ENDIF
424
425	!
426	!-- Computational grid
427	IF ( .NOT. ocean ) THEN
428	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
429	IF ( dz_stretch_level_index < nzt+1 ) THEN
430	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
431	dz_stretch_factor, dz_max
432	ENDIF
433	ELSE
434	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
435	IF ( dz_stretch_level_index > 0 ) THEN
436	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
437	dz_stretch_factor, dz_max
438	ENDIF
439	ENDIF
440	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
441	MIN( nnz+2, nzt+2 )
442	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
443
444	!
445	!-- Topography
446	WRITE ( io, 270 ) topography
447	SELECT CASE ( TRIM( topography ) )
448
449	CASE ( 'flat' )
450	! no actions necessary
451
452	CASE ( 'single_building' )
453	blx = INT( building_length_x / dx )
454	bly = INT( building_length_y / dy )
455	bh = INT( building_height / dz )
456
457	IF ( building_wall_left == 9999999.9 ) THEN
458	building_wall_left = ( nx + 1 - blx ) / 2 * dx
459	ENDIF
460	bxl = INT ( building_wall_left / dx + 0.5 )
461	bxr = bxl + blx
462
463	IF ( building_wall_south == 9999999.9 ) THEN
464	building_wall_south = ( ny + 1 - bly ) / 2 * dy
465	ENDIF
466	bys = INT ( building_wall_south / dy + 0.5 )
467	byn = bys + bly
468
469	WRITE ( io, 271 ) building_length_x, building_length_y, &
470	building_height, bxl, bxr, bys, byn
471
472	CASE ( 'single_street_canyon' )
473	ch = NINT( canyon_height / dz )
474	IF ( canyon_width_x /= 9999999.9 ) THEN
475	!
476	!-- Street canyon in y direction
477	cwx = NINT( canyon_width_x / dx )
478	IF ( canyon_wall_left == 9999999.9 ) THEN
479	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
480	ENDIF
481	cxl = NINT( canyon_wall_left / dx )
482	cxr = cxl + cwx
483	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
484
485	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
486	!
487	!-- Street canyon in x direction
488	cwy = NINT( canyon_width_y / dy )
489	IF ( canyon_wall_south == 9999999.9 ) THEN
490	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
491	ENDIF
492	cys = NINT( canyon_wall_south / dy )
493	cyn = cys + cwy
494	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
495	ENDIF
496
497	END SELECT
498
499	IF ( TRIM( topography ) /= 'flat' ) THEN
500	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
501	IF ( TRIM( topography ) == 'single_building' .OR. &
502	TRIM( topography ) == 'single_street_canyon' ) THEN
503	WRITE ( io, 278 )
504	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
505	WRITE ( io, 279 )
506	ENDIF
507	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
508	WRITE ( io, 278 )
509	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
510	WRITE ( io, 279 )
511	ENDIF
512	ENDIF
513
514	IF ( plant_canopy ) THEN
515
516	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
517	IF ( passive_scalar ) THEN
518	WRITE ( io, 281 ) scalar_exchange_coefficient, &
519	leaf_surface_concentration
520	ENDIF
521
522	!
523	!-- Heat flux at the top of vegetation
524	WRITE ( io, 282 ) cthf
525
526	!
527	!-- Leaf area density profile
528	!-- Building output strings, starting with surface value
529	WRITE ( learde, '(F6.4)' ) lad_surface
530	gradients = '------'
531	slices = ' 0'
532	coordinates = ' 0.0'
533	i = 1
534	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
535
536	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
537	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
538
539	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
540	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
541
542	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
543	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
544
545	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
546	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
547
548	i = i + 1
549	ENDDO
550
551	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
552	TRIM( gradients ), TRIM( slices )
553
554	ENDIF
555
556	!
557	!-- Boundary conditions
558	IF ( ibc_p_b == 0 ) THEN
559	runten = 'p(0) = 0 \|'
560	ELSEIF ( ibc_p_b == 1 ) THEN
561	runten = 'p(0) = p(1) \|'
562	ELSE
563	runten = 'p(0) = p(1) +R\|'
564	ENDIF
565	IF ( ibc_p_t == 0 ) THEN
566	roben = 'p(nzt+1) = 0 \|'
567	ELSE
568	roben = 'p(nzt+1) = p(nzt) \|'
569	ENDIF
570
571	IF ( ibc_uv_b == 0 ) THEN
572	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
573	ELSE
574	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
575	ENDIF
576	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
577	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
578	ELSEIF ( ibc_uv_t == 0 ) THEN
579	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
580	ELSE
581	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
582	ENDIF
583
584	IF ( ibc_pt_b == 0 ) THEN
585	runten = TRIM( runten ) // ' pt(0) = pt_surface'
586	ELSEIF ( ibc_pt_b == 1 ) THEN
587	runten = TRIM( runten ) // ' pt(0) = pt(1)'
588	ELSEIF ( ibc_pt_b == 2 ) THEN
589	runten = TRIM( runten ) // ' pt(0) = from coupled model'
590	ENDIF
591	IF ( ibc_pt_t == 0 ) THEN
592	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
593	ELSEIF( ibc_pt_t == 1 ) THEN
594	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
595	ELSEIF( ibc_pt_t == 2 ) THEN
596	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
597
598	ENDIF
599
600	WRITE ( io, 300 ) runten, roben
601
602	IF ( .NOT. constant_diffusion ) THEN
603	IF ( ibc_e_b == 1 ) THEN
604	runten = 'e(0) = e(1)'
605	ELSE
606	runten = 'e(0) = e(1) = (u/0.1)*2'
607	ENDIF
608	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
609
610	WRITE ( io, 301 ) 'e', runten, roben
611
612	ENDIF
613
614	IF ( ocean ) THEN
615	runten = 'sa(0) = sa(1)'
616	IF ( ibc_sa_t == 0 ) THEN
617	roben = 'sa(nzt+1) = sa_surface'
618	ELSE
619	roben = 'sa(nzt+1) = sa(nzt)'
620	ENDIF
621	WRITE ( io, 301 ) 'sa', runten, roben
622	ENDIF
623
624	IF ( humidity ) THEN
625	IF ( ibc_q_b == 0 ) THEN
626	runten = 'q(0) = q_surface'
627	ELSE
628	runten = 'q(0) = q(1)'
629	ENDIF
630	IF ( ibc_q_t == 0 ) THEN
631	roben = 'q(nzt) = q_top'
632	ELSE
633	roben = 'q(nzt) = q(nzt-1) + dq/dz'
634	ENDIF
635	WRITE ( io, 301 ) 'q', runten, roben
636	ENDIF
637
638	IF ( passive_scalar ) THEN
639	IF ( ibc_q_b == 0 ) THEN
640	runten = 's(0) = s_surface'
641	ELSE
642	runten = 's(0) = s(1)'
643	ENDIF
644	IF ( ibc_q_t == 0 ) THEN
645	roben = 's(nzt) = s_top'
646	ELSE
647	roben = 's(nzt) = s(nzt-1) + ds/dz'
648	ENDIF
649	WRITE ( io, 301 ) 's', runten, roben
650	ENDIF
651
652	IF ( use_surface_fluxes ) THEN
653	WRITE ( io, 303 )
654	IF ( constant_heatflux ) THEN
655	WRITE ( io, 306 ) surface_heatflux
656	IF ( random_heatflux ) WRITE ( io, 307 )
657	ENDIF
658	IF ( humidity .AND. constant_waterflux ) THEN
659	WRITE ( io, 311 ) surface_waterflux
660	ENDIF
661	IF ( passive_scalar .AND. constant_waterflux ) THEN
662	WRITE ( io, 313 ) surface_waterflux
663	ENDIF
664	ENDIF
665
666	IF ( use_top_fluxes ) THEN
667	WRITE ( io, 304 )
668	IF ( coupling_mode == 'uncoupled' ) THEN
669	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
670	IF ( constant_top_heatflux ) THEN
671	WRITE ( io, 306 ) top_heatflux
672	ENDIF
673	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
674	WRITE ( io, 316 )
675	ENDIF
676	IF ( ocean .AND. constant_top_salinityflux ) THEN
677	WRITE ( io, 309 ) top_salinityflux
678	ENDIF
679	IF ( humidity .OR. passive_scalar ) THEN
680	WRITE ( io, 315 )
681	ENDIF
682	ENDIF
683
684	IF ( prandtl_layer ) THEN
685	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
686	z0h_factor*roughness_length, kappa, &
687	rif_min, rif_max
688	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
689	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
690	WRITE ( io, 312 )
691	ENDIF
692	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
693	WRITE ( io, 314 )
694	ENDIF
695	ELSE
696	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
697	WRITE ( io, 310 ) rif_min, rif_max
698	ENDIF
699	ENDIF
700
701	WRITE ( io, 317 ) bc_lr, bc_ns
702	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
703	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
704	IF ( turbulent_inflow ) THEN
705	WRITE ( io, 319 ) recycling_width, recycling_plane, &
706	inflow_damping_height, inflow_damping_width
707	ENDIF
708	ENDIF
709
710	!
711	!-- Listing of 1D-profiles
712	WRITE ( io, 325 ) dt_dopr_listing
713	IF ( averaging_interval_pr /= 0.0 ) THEN
714	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
715	ENDIF
716
717	!
718	!-- DATA output
719	WRITE ( io, 330 )
720	IF ( averaging_interval_pr /= 0.0 ) THEN
721	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
722	ENDIF
723
724	!
725	!-- 1D-profiles
726	dopr_chr = 'Profile:'
727	IF ( dopr_n /= 0 ) THEN
728	WRITE ( io, 331 )
729
730	output_format = ''
731	IF ( netcdf_output ) THEN
732	IF ( netcdf_data_format == 1 ) THEN
733	output_format = 'NetCDF classic'
734	ELSE
735	output_format = 'NetCDF 64bit offset'
736	ENDIF
737	ENDIF
738	WRITE ( io, 344 ) output_format
739
740	DO i = 1, dopr_n
741	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
742	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
743	WRITE ( io, 332 ) dopr_chr
744	dopr_chr = ' :'
745	ENDIF
746	ENDDO
747
748	IF ( dopr_chr /= '' ) THEN
749	WRITE ( io, 332 ) dopr_chr
750	ENDIF
751	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
752	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
753	ENDIF
754
755	!
756	!-- 2D-arrays
757	DO av = 0, 1
758
759	i = 1
760	do2d_xy = ''
761	do2d_xz = ''
762	do2d_yz = ''
763	DO WHILE ( do2d(av,i) /= ' ' )
764
765	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
766	do2d_mode = do2d(av,i)(l-1:l)
767
768	SELECT CASE ( do2d_mode )
769	CASE ( 'xy' )
770	ll = LEN_TRIM( do2d_xy )
771	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
772	CASE ( 'xz' )
773	ll = LEN_TRIM( do2d_xz )
774	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
775	CASE ( 'yz' )
776	ll = LEN_TRIM( do2d_yz )
777	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
778	END SELECT
779
780	i = i + 1
781
782	ENDDO
783
784	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
785	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
786	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
787	( netcdf_output .OR. iso2d_output ) ) THEN
788
789	IF ( av == 0 ) THEN
790	WRITE ( io, 334 ) ''
791	ELSE
792	WRITE ( io, 334 ) '(time-averaged)'
793	ENDIF
794
795	IF ( do2d_at_begin ) THEN
796	begin_chr = 'and at the start'
797	ELSE
798	begin_chr = ''
799	ENDIF
800
801	output_format = ''
802	IF ( netcdf_output ) THEN
803	IF ( netcdf_data_format == 1 ) THEN
804	output_format = 'NetCDF classic'
805	ELSEIF ( netcdf_data_format == 2 ) THEN
806	output_format = 'NetCDF 64bit offset'
807	ELSEIF ( netcdf_data_format == 3 ) THEN
808	output_format = 'NetCDF4/HDF5'
809	ELSEIF ( netcdf_data_format == 4 ) THEN
810	output_format = 'NetCDF4/HDF5 clasic'
811	ENDIF
812	ENDIF
813	IF ( iso2d_output ) THEN
814	IF ( netcdf_output ) THEN
815	output_format = TRIM( output_format ) // ' and iso2d'
816	ELSE
817	output_format = 'iso2d'
818	ENDIF
819	ENDIF
820	WRITE ( io, 344 ) output_format
821
822	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
823	i = 1
824	slices = '/'
825	coordinates = '/'
826	!
827	!-- Building strings with index and coordinate informations of the
828	!-- slices
829	DO WHILE ( section(i,1) /= -9999 )
830
831	WRITE (section_chr,'(I5)') section(i,1)
832	section_chr = ADJUSTL( section_chr )
833	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
834
835	IF ( section(i,1) == -1 ) THEN
836	WRITE (coor_chr,'(F10.1)') -1.0
837	ELSE
838	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
839	ENDIF
840	coor_chr = ADJUSTL( coor_chr )
841	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
842
843	i = i + 1
844	ENDDO
845	IF ( av == 0 ) THEN
846	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
847	TRIM( begin_chr ), 'k', TRIM( slices ), &
848	TRIM( coordinates )
849	IF ( skip_time_do2d_xy /= 0.0 ) THEN
850	WRITE ( io, 339 ) skip_time_do2d_xy
851	ENDIF
852	ELSE
853	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
854	TRIM( begin_chr ), averaging_interval, &
855	dt_averaging_input, 'k', TRIM( slices ), &
856	TRIM( coordinates )
857	IF ( skip_time_data_output_av /= 0.0 ) THEN
858	WRITE ( io, 339 ) skip_time_data_output_av
859	ENDIF
860	ENDIF
861
862	ENDIF
863
864	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
865	i = 1
866	slices = '/'
867	coordinates = '/'
868	!
869	!-- Building strings with index and coordinate informations of the
870	!-- slices
871	DO WHILE ( section(i,2) /= -9999 )
872
873	WRITE (section_chr,'(I5)') section(i,2)
874	section_chr = ADJUSTL( section_chr )
875	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
876
877	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
878	coor_chr = ADJUSTL( coor_chr )
879	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
880
881	i = i + 1
882	ENDDO
883	IF ( av == 0 ) THEN
884	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
885	TRIM( begin_chr ), 'j', TRIM( slices ), &
886	TRIM( coordinates )
887	IF ( skip_time_do2d_xz /= 0.0 ) THEN
888	WRITE ( io, 339 ) skip_time_do2d_xz
889	ENDIF
890	ELSE
891	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
892	TRIM( begin_chr ), averaging_interval, &
893	dt_averaging_input, 'j', TRIM( slices ), &
894	TRIM( coordinates )
895	IF ( skip_time_data_output_av /= 0.0 ) THEN
896	WRITE ( io, 339 ) skip_time_data_output_av
897	ENDIF
898	ENDIF
899	ENDIF
900
901	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
902	i = 1
903	slices = '/'
904	coordinates = '/'
905	!
906	!-- Building strings with index and coordinate informations of the
907	!-- slices
908	DO WHILE ( section(i,3) /= -9999 )
909
910	WRITE (section_chr,'(I5)') section(i,3)
911	section_chr = ADJUSTL( section_chr )
912	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
913
914	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
915	coor_chr = ADJUSTL( coor_chr )
916	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
917
918	i = i + 1
919	ENDDO
920	IF ( av == 0 ) THEN
921	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
922	TRIM( begin_chr ), 'i', TRIM( slices ), &
923	TRIM( coordinates )
924	IF ( skip_time_do2d_yz /= 0.0 ) THEN
925	WRITE ( io, 339 ) skip_time_do2d_yz
926	ENDIF
927	ELSE
928	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
929	TRIM( begin_chr ), averaging_interval, &
930	dt_averaging_input, 'i', TRIM( slices ), &
931	TRIM( coordinates )
932	IF ( skip_time_data_output_av /= 0.0 ) THEN
933	WRITE ( io, 339 ) skip_time_data_output_av
934	ENDIF
935	ENDIF
936	ENDIF
937
938	ENDIF
939
940	ENDDO
941
942	!
943	!-- 3d-arrays
944	DO av = 0, 1
945
946	i = 1
947	do3d_chr = ''
948	DO WHILE ( do3d(av,i) /= ' ' )
949
950	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
951	i = i + 1
952
953	ENDDO
954
955	IF ( do3d_chr /= '' ) THEN
956	IF ( av == 0 ) THEN
957	WRITE ( io, 336 ) ''
958	ELSE
959	WRITE ( io, 336 ) '(time-averaged)'
960	ENDIF
961
962	output_format = ''
963	IF ( netcdf_output ) THEN
964	IF ( netcdf_data_format == 1 ) THEN
965	output_format = 'NetCDF classic'
966	ELSEIF ( netcdf_data_format == 2 ) THEN
967	output_format = 'NetCDF 64bit offset'
968	ELSEIF ( netcdf_data_format == 3 ) THEN
969	output_format = 'NetCDF4/HDF5'
970	ELSEIF ( netcdf_data_format == 4 ) THEN
971	output_format = 'NetCDF4/HDF5 clasic'
972	ENDIF
973	ENDIF
974	IF ( avs_output ) THEN
975	IF ( netcdf_output ) THEN
976	output_format = TRIM( output_format ) // ' and avs'
977	ELSE
978	output_format = 'avs'
979	ENDIF
980	ENDIF
981	WRITE ( io, 344 ) output_format
982
983	IF ( do3d_at_begin ) THEN
984	begin_chr = 'and at the start'
985	ELSE
986	begin_chr = ''
987	ENDIF
988	IF ( av == 0 ) THEN
989	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
990	zu(nz_do3d), nz_do3d
991	ELSE
992	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
993	TRIM( begin_chr ), averaging_interval, &
994	dt_averaging_input, zu(nz_do3d), nz_do3d
995	ENDIF
996
997	IF ( do3d_compress ) THEN
998	do3d_chr = ''
999	i = 1
1000	DO WHILE ( do3d(av,i) /= ' ' )
1001
1002	SELECT CASE ( do3d(av,i) )
1003	CASE ( 'u' )
1004	j = 1
1005	CASE ( 'v' )
1006	j = 2
1007	CASE ( 'w' )
1008	j = 3
1009	CASE ( 'p' )
1010	j = 4
1011	CASE ( 'pt' )
1012	j = 5
1013	END SELECT
1014	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1015	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1016	':' // prec // ','
1017	i = i + 1
1018
1019	ENDDO
1020	WRITE ( io, 338 ) do3d_chr
1021
1022	ENDIF
1023
1024	IF ( av == 0 ) THEN
1025	IF ( skip_time_do3d /= 0.0 ) THEN
1026	WRITE ( io, 339 ) skip_time_do3d
1027	ENDIF
1028	ELSE
1029	IF ( skip_time_data_output_av /= 0.0 ) THEN
1030	WRITE ( io, 339 ) skip_time_data_output_av
1031	ENDIF
1032	ENDIF
1033
1034	ENDIF
1035
1036	ENDDO
1037
1038	!
1039	!-- masked arrays
1040	IF ( masks > 0 ) WRITE ( io, 345 ) &
1041	mask_scale_x, mask_scale_y, mask_scale_z
1042	DO mid = 1, masks
1043	DO av = 0, 1
1044
1045	i = 1
1046	domask_chr = ''
1047	DO WHILE ( domask(mid,av,i) /= ' ' )
1048	domask_chr = TRIM( domask_chr ) // ' ' // &
1049	TRIM( domask(mid,av,i) ) // ','
1050	i = i + 1
1051	ENDDO
1052
1053	IF ( domask_chr /= '' ) THEN
1054	IF ( av == 0 ) THEN
1055	WRITE ( io, 346 ) '', mid
1056	ELSE
1057	WRITE ( io, 346 ) ' (time-averaged)', mid
1058	ENDIF
1059
1060	output_format = ''
1061	IF ( netcdf_output ) THEN
1062	IF ( netcdf_data_format == 1 ) THEN
1063	output_format = 'NetCDF classic'
1064	ELSEIF ( netcdf_data_format == 2 ) THEN
1065	output_format = 'NetCDF 64bit offset'
1066	ELSEIF ( netcdf_data_format == 3 ) THEN
1067	output_format = 'NetCDF4/HDF5'
1068	ELSEIF ( netcdf_data_format == 4 ) THEN
1069	output_format = 'NetCDF4/HDF5 clasic'
1070	ENDIF
1071	ENDIF
1072	WRITE ( io, 344 ) output_format
1073
1074	IF ( av == 0 ) THEN
1075	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1076	ELSE
1077	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1078	averaging_interval, dt_averaging_input
1079	ENDIF
1080
1081	IF ( av == 0 ) THEN
1082	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1083	WRITE ( io, 339 ) skip_time_domask(mid)
1084	ENDIF
1085	ELSE
1086	IF ( skip_time_data_output_av /= 0.0 ) THEN
1087	WRITE ( io, 339 ) skip_time_data_output_av
1088	ENDIF
1089	ENDIF
1090	!
1091	!-- output locations
1092	DO dim = 1, 3
1093	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1094	count = 0
1095	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1096	count = count + 1
1097	ENDDO
1098	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1099	mask(mid,dim,:count)
1100	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1101	mask_loop(mid,dim,2) < 0.0 .AND. &
1102	mask_loop(mid,dim,3) == 0.0 ) THEN
1103	WRITE ( io, 350 ) dir(dim), dir(dim)
1104	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1105	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1106	mask_loop(mid,dim,1:2)
1107	ELSE
1108	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1109	mask_loop(mid,dim,1:3)
1110	ENDIF
1111	ENDDO
1112	ENDIF
1113
1114	ENDDO
1115	ENDDO
1116
1117	!
1118	!-- Timeseries
1119	IF ( dt_dots /= 9999999.9 ) THEN
1120	WRITE ( io, 340 )
1121
1122	output_format = ''
1123	IF ( netcdf_output ) THEN
1124	IF ( netcdf_data_format == 1 ) THEN
1125	output_format = 'NetCDF classic'
1126	ELSE
1127	output_format = 'NetCDF 64bit offset'
1128	ENDIF
1129	ENDIF
1130	WRITE ( io, 344 ) output_format
1131	WRITE ( io, 341 ) dt_dots
1132	ENDIF
1133
1134	#if defined( __dvrp_graphics )
1135	!
1136	!-- Dvrp-output
1137	IF ( dt_dvrp /= 9999999.9 ) THEN
1138	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1139	TRIM( dvrp_username ), TRIM( dvrp_directory )
1140	i = 1
1141	l = 0
1142	m = 0
1143	DO WHILE ( mode_dvrp(i) /= ' ' )
1144	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1145	READ ( mode_dvrp(i), '(10X,I2)' ) j
1146	l = l + 1
1147	IF ( do3d(0,j) /= ' ' ) THEN
1148	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1149	isosurface_color(:,l)
1150	ENDIF
1151	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1152	READ ( mode_dvrp(i), '(6X,I2)' ) j
1153	m = m + 1
1154	IF ( do2d(0,j) /= ' ' ) THEN
1155	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1156	slicer_range_limits_dvrp(:,m)
1157	ENDIF
1158	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1159	WRITE ( io, 363 ) dvrp_psize
1160	IF ( particle_dvrpsize /= 'none' ) THEN
1161	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1162	dvrpsize_interval
1163	ENDIF
1164	IF ( particle_color /= 'none' ) THEN
1165	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1166	color_interval
1167	ENDIF
1168	ENDIF
1169	i = i + 1
1170	ENDDO
1171
1172	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1173	superelevation_y, superelevation, clip_dvrp_l, &
1174	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1175
1176	IF ( TRIM( topography ) /= 'flat' ) THEN
1177	WRITE ( io, 366 ) topography_color
1178	IF ( cluster_size > 1 ) THEN
1179	WRITE ( io, 367 ) cluster_size
1180	ENDIF
1181	ENDIF
1182
1183	ENDIF
1184	#endif
1185
1186	#if defined( __spectra )
1187	!
1188	!-- Spectra output
1189	IF ( dt_dosp /= 9999999.9 ) THEN
1190	WRITE ( io, 370 )
1191
1192	output_format = ''
1193	IF ( netcdf_output ) THEN
1194	IF ( netcdf_data_format == 1 ) THEN
1195	output_format = 'NetCDF classic'
1196	ELSE
1197	output_format = 'NetCDF 64bit offset'
1198	ENDIF
1199	ENDIF
1200	WRITE ( io, 344 ) output_format
1201	WRITE ( io, 371 ) dt_dosp
1202	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1203	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1204	( spectra_direction(i), i = 1,10 ), &
1205	( comp_spectra_level(i), i = 1,100 ), &
1206	( plot_spectra_level(i), i = 1,100 ), &
1207	averaging_interval_sp, dt_averaging_input_pr
1208	ENDIF
1209	#endif
1210
1211	WRITE ( io, 99 )
1212
1213	!
1214	!-- Physical quantities
1215	WRITE ( io, 400 )
1216
1217	!
1218	!-- Geostrophic parameters
1219	WRITE ( io, 410 ) omega, phi, f, fs
1220
1221	!
1222	!-- Other quantities
1223	WRITE ( io, 411 ) g
1224	IF ( use_reference ) THEN
1225	IF ( ocean ) THEN
1226	WRITE ( io, 412 ) prho_reference
1227	ELSE
1228	WRITE ( io, 413 ) pt_reference
1229	ENDIF
1230	ENDIF
1231
1232	!
1233	!-- Cloud physics parameters
1234	IF ( cloud_physics ) THEN
1235	WRITE ( io, 415 )
1236	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1237	ENDIF
1238
1239	!-- Profile of the geostrophic wind (component ug)
1240	!-- Building output strings
1241	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1242	gradients = '------'
1243	slices = ' 0'
1244	coordinates = ' 0.0'
1245	i = 1
1246	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1247
1248	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1249	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1250
1251	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1252	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1253
1254	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1255	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1256
1257	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1258	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1259
1260	IF ( i == 10 ) THEN
1261	EXIT
1262	ELSE
1263	i = i + 1
1264	ENDIF
1265
1266	ENDDO
1267
1268	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1269	TRIM( gradients ), TRIM( slices )
1270
1271	!-- Profile of the geostrophic wind (component vg)
1272	!-- Building output strings
1273	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1274	gradients = '------'
1275	slices = ' 0'
1276	coordinates = ' 0.0'
1277	i = 1
1278	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1279
1280	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1281	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1282
1283	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1284	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1285
1286	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1287	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1288
1289	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1290	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1291
1292	IF ( i == 10 ) THEN
1293	EXIT
1294	ELSE
1295	i = i + 1
1296	ENDIF
1297
1298	ENDDO
1299
1300	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1301	TRIM( gradients ), TRIM( slices )
1302
1303	!
1304	!-- Initial wind profiles
1305	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1306
1307	!
1308	!-- Initial temperature profile
1309	!-- Building output strings, starting with surface temperature
1310	WRITE ( temperatures, '(F6.2)' ) pt_surface
1311	gradients = '------'
1312	slices = ' 0'
1313	coordinates = ' 0.0'
1314	i = 1
1315	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1316
1317	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1318	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1319
1320	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1321	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1322
1323	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1324	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1325
1326	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1327	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1328
1329	IF ( i == 10 ) THEN
1330	EXIT
1331	ELSE
1332	i = i + 1
1333	ENDIF
1334
1335	ENDDO
1336
1337	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1338	TRIM( gradients ), TRIM( slices )
1339
1340	!
1341	!-- Initial humidity profile
1342	!-- Building output strings, starting with surface humidity
1343	IF ( humidity .OR. passive_scalar ) THEN
1344	WRITE ( temperatures, '(E8.1)' ) q_surface
1345	gradients = '--------'
1346	slices = ' 0'
1347	coordinates = ' 0.0'
1348	i = 1
1349	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1350
1351	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1352	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1353
1354	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1355	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1356
1357	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1358	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1359
1360	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1361	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1362
1363	IF ( i == 10 ) THEN
1364	EXIT
1365	ELSE
1366	i = i + 1
1367	ENDIF
1368
1369	ENDDO
1370
1371	IF ( humidity ) THEN
1372	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1373	TRIM( gradients ), TRIM( slices )
1374	ELSE
1375	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1376	TRIM( gradients ), TRIM( slices )
1377	ENDIF
1378	ENDIF
1379
1380	!
1381	!-- Initial salinity profile
1382	!-- Building output strings, starting with surface salinity
1383	IF ( ocean ) THEN
1384	WRITE ( temperatures, '(F6.2)' ) sa_surface
1385	gradients = '------'
1386	slices = ' 0'
1387	coordinates = ' 0.0'
1388	i = 1
1389	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1390
1391	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1392	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1393
1394	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1395	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1396
1397	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1398	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1399
1400	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1401	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1402
1403	IF ( i == 10 ) THEN
1404	EXIT
1405	ELSE
1406	i = i + 1
1407	ENDIF
1408
1409	ENDDO
1410
1411	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1412	TRIM( gradients ), TRIM( slices )
1413	ENDIF
1414
1415	!
1416	!-- Profile for the large scale vertial velocity
1417	!-- Building output strings, starting with surface value
1418	IF ( large_scale_subsidence ) THEN
1419	temperatures = ' 0.0'
1420	gradients = '------'
1421	slices = ' 0'
1422	coordinates = ' 0.0'
1423	i = 1
1424	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1425
1426	WRITE (coor_chr,'(E10.2,7X)') &
1427	w_subs(subs_vertical_gradient_level_i(i))
1428	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1429
1430	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1431	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1432
1433	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1434	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1435
1436	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1437	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1438
1439	IF ( i == 10 ) THEN
1440	EXIT
1441	ELSE
1442	i = i + 1
1443	ENDIF
1444
1445	ENDDO
1446
1447	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1448	TRIM( gradients ), TRIM( slices )
1449	ENDIF
1450
1451	!
1452	!-- Cloud physcis parameters / quantities / numerical methods
1453	WRITE ( io, 430 )
1454	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1455	WRITE ( io, 431 )
1456	ELSEIF ( humidity .AND. cloud_physics ) THEN
1457	WRITE ( io, 432 )
1458	IF ( radiation ) WRITE ( io, 132 )
1459	IF ( precipitation ) WRITE ( io, 133 )
1460	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1461	WRITE ( io, 433 )
1462	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1463	IF ( collision_kernel /= 'none' ) THEN
1464	WRITE ( io, 435 ) TRIM( collision_kernel )
1465	IF ( collision_kernel(6:9) == 'fast' ) THEN
1466	WRITE ( io, 436 ) radius_classes, dissipation_classes
1467	ENDIF
1468	ELSE
1469	WRITE ( io, 437 )
1470	ENDIF
1471	ENDIF
1472
1473	!
1474	!-- LES / turbulence parameters
1475	WRITE ( io, 450 )
1476
1477	!--
1478	! ... LES-constants used must still be added here
1479	!--
1480	IF ( constant_diffusion ) THEN
1481	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1482	prandtl_number
1483	ENDIF
1484	IF ( .NOT. constant_diffusion) THEN
1485	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1486	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1487	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1488	ENDIF
1489
1490	!
1491	!-- Special actions during the run
1492	WRITE ( io, 470 )
1493	IF ( create_disturbances ) THEN
1494	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1495	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1496	zu(disturbance_level_ind_t), disturbance_level_ind_t
1497	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1498	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1499	ELSE
1500	WRITE ( io, 473 ) disturbance_energy_limit
1501	ENDIF
1502	WRITE ( io, 474 ) TRIM( random_generator )
1503	ENDIF
1504	IF ( pt_surface_initial_change /= 0.0 ) THEN
1505	WRITE ( io, 475 ) pt_surface_initial_change
1506	ENDIF
1507	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1508	WRITE ( io, 476 ) q_surface_initial_change
1509	ENDIF
1510	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1511	WRITE ( io, 477 ) q_surface_initial_change
1512	ENDIF
1513
1514	IF ( particle_advection ) THEN
1515	!
1516	!-- Particle attributes
1517	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1518	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1519	end_time_prel, dt_sort_particles
1520	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1521	IF ( random_start_position ) WRITE ( io, 481 )
1522	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1523	WRITE ( io, 495 ) total_number_of_particles
1524	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1525	WRITE ( io, 483 ) maximum_number_of_tailpoints
1526	IF ( minimum_tailpoint_distance /= 0 ) THEN
1527	WRITE ( io, 484 ) total_number_of_tails, &
1528	minimum_tailpoint_distance, &
1529	maximum_tailpoint_age
1530	ENDIF
1531	ENDIF
1532	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1533	WRITE ( io, 485 ) dt_write_particle_data
1534	output_format = ''
1535	IF ( netcdf_output ) THEN
1536	IF ( netcdf_data_format > 1 ) THEN
1537	output_format = 'netcdf (64 bit offset) and binary'
1538	ELSE
1539	output_format = 'netcdf and binary'
1540	ENDIF
1541	ELSE
1542	output_format = 'binary'
1543	ENDIF
1544	WRITE ( io, 344 ) output_format
1545	ENDIF
1546	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1547	IF ( write_particle_statistics ) WRITE ( io, 486 )
1548
1549	WRITE ( io, 487 ) number_of_particle_groups
1550
1551	DO i = 1, number_of_particle_groups
1552	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1553	WRITE ( io, 490 ) i, 0.0
1554	WRITE ( io, 492 )
1555	ELSE
1556	WRITE ( io, 490 ) i, radius(i)
1557	IF ( density_ratio(i) /= 0.0 ) THEN
1558	WRITE ( io, 491 ) density_ratio(i)
1559	ELSE
1560	WRITE ( io, 492 )
1561	ENDIF
1562	ENDIF
1563	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1564	pdx(i), pdy(i), pdz(i)
1565	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1566	ENDDO
1567
1568	ENDIF
1569
1570
1571	!
1572	!-- Parameters of 1D-model
1573	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1574	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1575	mixing_length_1d, dissipation_1d
1576	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1577	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1578	ENDIF
1579	ENDIF
1580
1581	!
1582	!-- User-defined informations
1583	CALL user_header( io )
1584
1585	WRITE ( io, 99 )
1586
1587	!
1588	!-- Write buffer contents to disc immediately
1589	CALL local_flush( io )
1590
1591	!
1592	!-- Here the FORMATs start
1593
1594	99 FORMAT (1X,78('-'))
1595	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1596	1X,'* ',A,' *',9X,A/ &
1597	1X,'***************************',9X,42('-'))
1598	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1599	37X,42('-'))
1600	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1601	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1602	' Run on host: ',A10)
1603	#if defined( __parallel )
1604	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1605	')',1X,A)
1606	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1607	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1608	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1609	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1610	37X,'because the job is running on an SMP-cluster')
1611	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1612	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1613	#endif
1614	110 FORMAT (/' Numerical Schemes:'/ &
1615	' -----------------'/)
1616	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1617	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1618	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1619	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1620	' or Upstream')
1621	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1622	' or Upstream')
1623	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1624	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1625	' Translation velocity = ',A/ &
1626	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1627	122 FORMAT (' --> Time differencing scheme: ',A)
1628	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1629	' maximum damping coefficient: ',F5.3, ' 1/s')
1630	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1631	130 FORMAT (' --> Additional prognostic equation for the total water content')
1632	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1633	F6.2, ' K assumed')
1634	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1635	' effective emissivity scheme')
1636	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1637	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1638	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1639	A,'-cycle)'/ &
1640	' number of grid levels: ',I2/ &
1641	' Gauss-Seidel red/black iterations: ',I2)
1642	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1643	I3,')')
1644	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1645	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1646	I3,')'/ &
1647	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1648	I3,')')
1649	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1650	139 FORMAT (' --> Loop optimization method: ',A)
1651	140 FORMAT (' maximum residual allowed: ',E10.3)
1652	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1653	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1654	'step')
1655	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1656	'kinetic energy')
1657	144 FORMAT (' masking method is used')
1658	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1659	'conserved'/ &
1660	' using the ',A,' mode')
1661	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1662	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1663	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1664	/' starting from dp_level_b =', F8.3, 'm', A /)
1665	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1666	'prognostic equation for')
1667	154 FORMAT (' the potential temperature')
1668	200 FORMAT (//' Run time and time step information:'/ &
1669	' ----------------------------------'/)
1670	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1671	' CFL-factor: ',F4.2)
1672	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1673	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1674	' End time: ',F9.3,' s')
1675	204 FORMAT ( A,F9.3,' s')
1676	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1677	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1678	' CPU-time used: ',F9.3,' s per timestep: ', &
1679	' ',F9.3,' s'/ &
1680	' per second of simulated tim', &
1681	'e: ',F9.3,' s')
1682	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1683	250 FORMAT (//' Computational grid and domain size:'/ &
1684	' ----------------------------------'// &
1685	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1686	' m dz = ',F7.3,' m'/ &
1687	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1688	' m z(u) = ',F10.3,' m'/)
1689	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1690	' factor: ',F5.3/ &
1691	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1692	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1693	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1694	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1695	' degrees')
1696	270 FORMAT (//' Topography informations:'/ &
1697	' -----------------------'// &
1698	1X,'Topography: ',A)
1699	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1700	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1701	' / ',I4)
1702	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1703	' direction' / &
1704	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1705	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1706	278 FORMAT (' Topography grid definition convention:'/ &
1707	' cell edge (staggered grid points'/ &
1708	' (u in x-direction, v in y-direction))' /)
1709	279 FORMAT (' Topography grid definition convention:'/ &
1710	' cell center (scalar grid points)' /)
1711	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1712	' ------------------------------'// &
1713	' Canopy mode: ', A / &
1714	' Canopy top: ',I4 / &
1715	' Leaf drag coefficient: ',F6.2 /)
1716	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1717	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1718	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1719	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1720	' Height: ',A,' m'/ &
1721	' Leaf area density: ',A,' m2/m3'/ &
1722	' Gradient: ',A,' m2/m4'/ &
1723	' Gridpoint: ',A)
1724
1725	300 FORMAT (//' Boundary conditions:'/ &
1726	' -------------------'// &
1727	' p uv ', &
1728	' pt'// &
1729	' B. bound.: ',A/ &
1730	' T. bound.: ',A)
1731	301 FORMAT (/' ',A// &
1732	' B. bound.: ',A/ &
1733	' T. bound.: ',A)
1734	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1735	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1736	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1737	'computational u,v-level:'// &
1738	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1739	' m kappa = ',F4.2/ &
1740	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1741	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1742	307 FORMAT (' Heatflux has a random normal distribution')
1743	308 FORMAT (' Predefined surface temperature')
1744	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1745	310 FORMAT (//' 1D-Model:'// &
1746	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1747	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1748	312 FORMAT (' Predefined surface humidity')
1749	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1750	314 FORMAT (' Predefined scalar value at the surface')
1751	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1752	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1753	'atmosphere model')
1754	317 FORMAT (//' Lateral boundaries:'/ &
1755	' left/right: ',A/ &
1756	' north/south: ',A)
1757	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1758	'damping factor = ',F6.4)
1759	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1760	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1761	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1762	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1763	' v: ',F9.6,' m2/s2')
1764	325 FORMAT (//' List output:'/ &
1765	' -----------'// &
1766	' 1D-Profiles:'/ &
1767	' Output every ',F8.2,' s')
1768	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1769	' Averaging input every ',F8.2,' s')
1770	330 FORMAT (//' Data output:'/ &
1771	' -----------'/)
1772	331 FORMAT (/' 1D-Profiles:')
1773	332 FORMAT (/' ',A)
1774	333 FORMAT (' Output every ',F8.2,' s',/ &
1775	' Time averaged over ',F8.2,' s'/ &
1776	' Averaging input every ',F8.2,' s')
1777	334 FORMAT (/' 2D-Arrays',A,':')
1778	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1779	' Output every ',F8.2,' s ',A/ &
1780	' Cross sections at ',A1,' = ',A/ &
1781	' scalar-coordinates: ',A,' m'/)
1782	336 FORMAT (/' 3D-Arrays',A,':')
1783	337 FORMAT (/' Arrays: ',A/ &
1784	' Output every ',F8.2,' s ',A/ &
1785	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1786	338 FORMAT (' Compressed data output'/ &
1787	' Decimal precision: ',A/)
1788	339 FORMAT (' No output during initial ',F8.2,' s')
1789	340 FORMAT (/' Time series:')
1790	341 FORMAT (' Output every ',F8.2,' s'/)
1791	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1792	' Output every ',F8.2,' s ',A/ &
1793	' Time averaged over ',F8.2,' s'/ &
1794	' Averaging input every ',F8.2,' s'/ &
1795	' Cross sections at ',A1,' = ',A/ &
1796	' scalar-coordinates: ',A,' m'/)
1797	343 FORMAT (/' Arrays: ',A/ &
1798	' Output every ',F8.2,' s ',A/ &
1799	' Time averaged over ',F8.2,' s'/ &
1800	' Averaging input every ',F8.2,' s'/ &
1801	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1802	344 FORMAT (' Output format: ',A/)
1803	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1804	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1805	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1806	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1807	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1808	347 FORMAT (' Variables: ',A/ &
1809	' Output every ',F8.2,' s')
1810	348 FORMAT (' Variables: ',A/ &
1811	' Output every ',F8.2,' s'/ &
1812	' Time averaged over ',F8.2,' s'/ &
1813	' Averaging input every ',F8.2,' s')
1814	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1815	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1816	13(' ',8(F8.2,',')/) )
1817	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1818	'all gridpoints along ',A,'-direction (default).' )
1819	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1820	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1821	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1822	#if defined( __dvrp_graphics )
1823	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1824	' Output every ',F7.1,' s'/ &
1825	' Output mode: ',A/ &
1826	' Host / User: ',A,' / ',A/ &
1827	' Directory: ',A// &
1828	' The sequence contains:')
1829	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1830	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1831	362 FORMAT (/' Slicer plane ',A/ &
1832	' Slicer limits: [',F6.2,',',F6.2,']')
1833	363 FORMAT (/' Particles'/ &
1834	' particle size: ',F7.2,' m')
1835	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1836	F6.2,',',F6.2,']')
1837	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1838	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1839	')'/ &
1840	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1841	' from y = ',F9.1,' m to y = ',F9.1,' m')
1842	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1843	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1844	#endif
1845	#if defined( __spectra )
1846	370 FORMAT (' Spectra:')
1847	371 FORMAT (' Output every ',F7.1,' s'/)
1848	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1849	' Directions: ', 10(A5,',')/ &
1850	' height levels k = ', 20(I3,',')/ &
1851	' ', 20(I3,',')/ &
1852	' ', 20(I3,',')/ &
1853	' ', 20(I3,',')/ &
1854	' ', 19(I3,','),I3,'.'/ &
1855	' height levels selected for standard plot:'/ &
1856	' k = ', 20(I3,',')/ &
1857	' ', 20(I3,',')/ &
1858	' ', 20(I3,',')/ &
1859	' ', 20(I3,',')/ &
1860	' ', 19(I3,','),I3,'.'/ &
1861	' Time averaged over ', F7.1, ' s,' / &
1862	' Profiles for the time averaging are taken every ', &
1863	F6.1,' s')
1864	#endif
1865	400 FORMAT (//' Physical quantities:'/ &
1866	' -------------------'/)
1867	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1868	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1869	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1870	' f* = ',F9.6,' 1/s')
1871	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1872	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1873	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1874	415 FORMAT (/' Cloud physics parameters:'/ &
1875	' ------------------------'/)
1876	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1877	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1878	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1879	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1880	' Vapourization heat : L_v = ',E8.2,' J/kg')
1881	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1882	' Height: ',A,' m'/ &
1883	' Temperature: ',A,' K'/ &
1884	' Gradient: ',A,' K/100m'/ &
1885	' Gridpoint: ',A)
1886	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1887	' Height: ',A,' m'/ &
1888	' Humidity: ',A,' kg/kg'/ &
1889	' Gradient: ',A,' (kg/kg)/100m'/ &
1890	' Gridpoint: ',A)
1891	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1892	' Height: ',A,' m'/ &
1893	' Scalar concentration: ',A,' kg/m**3'/ &
1894	' Gradient: ',A,' (kg/m**3)/100m'/ &
1895	' Gridpoint: ',A)
1896	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1897	' Height: ',A,' m'/ &
1898	' ug: ',A,' m/s'/ &
1899	' Gradient: ',A,' 1/100s'/ &
1900	' Gridpoint: ',A)
1901	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1902	' Height: ',A,' m'/ &
1903	' vg: ',A,' m/s'/ &
1904	' Gradient: ',A,' 1/100s'/ &
1905	' Gridpoint: ',A)
1906	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1907	' Height: ',A,' m'/ &
1908	' Salinity: ',A,' psu'/ &
1909	' Gradient: ',A,' psu/100m'/ &
1910	' Gridpoint: ',A)
1911	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1912	' Height: ',A,' m'/ &
1913	' w_subs: ',A,' m/s'/ &
1914	' Gradient: ',A,' (m/s)/100m'/ &
1915	' Gridpoint: ',A)
1916	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1917	' profiles')
1918	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1919	' ----------------------------------'/)
1920	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1921	'on)')
1922	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1923	' total water content is used.'/ &
1924	' Condensation is parameterized via 0% - or 100% scheme.')
1925	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1926	'icle model')
1927	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1928	' droplets < 1.0E-6 m')
1929	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1930	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1931	'are used'/ &
1932	' number of radius classes: ',I3,' interval ', &
1933	'[1.0E-6,2.0E-4] m'/ &
1934	' number of dissipation classes: ',I2,' interval ', &
1935	'[0,1000] cm2/s3')
1936	437 FORMAT (' Droplet collision is switched off')
1937	450 FORMAT (//' LES / Turbulence quantities:'/ &
1938	' ---------------------------'/)
1939	451 FORMAT (' Diffusion coefficients are constant:'/ &
1940	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1941	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1942	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1943	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1944	470 FORMAT (//' Actions during the simulation:'/ &
1945	' -----------------------------'/)
1946	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1947	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1948	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1949	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1950	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1951	' to i/j =',I4)
1952	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1953	1X,F5.3, ' m2/s2')
1954	474 FORMAT (' Random number generator used : ',A/)
1955	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1956	'respectively, if'/ &
1957	' the value is negative) by ',F5.2,' K at the beginning of the',&
1958	' 3D-simulation'/)
1959	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1960	'respectively, if the'/ &
1961	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1962	' the 3D-simulation'/)
1963	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1964	'respectively, if the'/ &
1965	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1966	' the 3D-simulation'/)
1967	480 FORMAT (' Particles:'/ &
1968	' ---------'// &
1969	' Particle advection is active (switched on at t = ', F7.1, &
1970	' s)'/ &
1971	' Start of new particle generations every ',F6.1,' s'/ &
1972	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1973	' bottom: ', A, ' top: ', A/&
1974	' Maximum particle age: ',F9.1,' s'/ &
1975	' Advection stopped at t = ',F9.1,' s'/ &
1976	' Particles are sorted every ',F9.1,' s'/)
1977	481 FORMAT (' Particles have random start positions'/)
1978	482 FORMAT (' Particles are advected only horizontally'/)
1979	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1980	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1981	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1982	' Maximum age of the end of the tail: ',F8.2,' s')
1983	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1984	486 FORMAT (' Particle statistics are written on file'/)
1985	487 FORMAT (' Number of particle groups: ',I2/)
1986	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1987	' minimum timestep for advection: ', F7.5/)
1988	489 FORMAT (' Number of particles simultaneously released at each ', &
1989	'point: ', I5/)
1990	490 FORMAT (' Particle group ',I2,':'/ &
1991	' Particle radius: ',E10.3, 'm')
1992	491 FORMAT (' Particle inertia is activated'/ &
1993	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1994	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1995	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1996	' y:',F8.1,' - ',F8.1,' m'/&
1997	' z:',F8.1,' - ',F8.1,' m'/&
1998	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1999	' m dz = ',F8.1,' m'/)
2000	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2001	F8.2,' s'/)
2002	495 FORMAT (' Number of particles in total domain: ',I10/)
2003	500 FORMAT (//' 1D-Model parameters:'/ &
2004	' -------------------'// &
2005	' Simulation time: ',F8.1,' s'/ &
2006	' Run-controll output every: ',F8.1,' s'/ &
2007	' Vertical profile output every: ',F8.1,' s'/ &
2008	' Mixing length calculation: ',A/ &
2009	' Dissipation calculation: ',A/)
2010	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2011	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2012	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2013
2014
2015	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |