Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1007

Last change on this file since 1007 was 1004, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.0 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 1004 2012-09-14 14:56:50Z franke $
11	!
12	! 1003 2012-09-14 14:35:53Z raasch
13	! output of information about equal/unequal subdomain size removed
14	!
15	! 1001 2012-09-13 14:08:46Z raasch
16	! all actions concerning leapfrog- and upstream-spline-scheme removed
17	!
18	! 978 2012-08-09 08:28:32Z fricke
19	! -km_damp_max, outflow_damping_width
20	! +pt_damping_factor, pt_damping_width
21	! +z0h
22	!
23	! 964 2012-07-26 09:14:24Z raasch
24	! output of profil-related quantities removed
25	!
26	! 940 2012-07-09 14:31:00Z raasch
27	! Output in case of simulations for pure neutral stratification (no pt-equation
28	! solved)
29	!
30	! 927 2012-06-06 19:15:04Z raasch
31	! output of masking_method for mg-solver
32	!
33	! 868 2012-03-28 12:21:07Z raasch
34	! translation velocity in Galilean transformation changed to 0.6 * ug
35	!
36	! 833 2012-02-22 08:55:55Z maronga
37	! Adjusted format for leaf area density
38	!
39	! 828 2012-02-21 12:00:36Z raasch
40	! output of dissipation_classes + radius_classes
41	!
42	! 825 2012-02-19 03:03:44Z raasch
43	! Output of cloud physics parameters/quantities complemented and restructured
44	!
45	! 767 2011-10-14 06:39:12Z raasch
46	! Output of given initial u,v-profiles
47	!
48	! 759 2011-09-15 13:58:31Z raasch
49	! output of maximum number of parallel io streams
50	!
51	! 707 2011-03-29 11:39:40Z raasch
52	! bc_lr/ns replaced by bc_lr/ns_cyc
53	!
54	! 667 2010-12-23 12:06:00Z suehring/gryschka
55	! Output of advection scheme.
56	! Modified output of Prandtl-layer height.
57	!
58	! 580 2010-10-05 13:59:11Z heinze
59	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
60	! ws_vertical_gradient_level to subs_vertical_gradient_level and
61	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
62	!
63	! 493 2010-03-01 08:30:24Z raasch
64	! NetCDF data output format extendend for NetCDF4/HDF5
65	!
66	! 449 2010-02-02 11:23:59Z raasch
67	! +large scale vertical motion (subsidence/ascent)
68	! Bugfix: index problem concerning gradient_level indices removed
69	!
70	! 410 2009-12-04 17:05:40Z letzel
71	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
72	! mask_scale\|_x\|y\|z, masks, skip_time_domask
73	!
74	! 346 2009-07-06 10:13:41Z raasch
75	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
76	! Coupling with independent precursor runs.
77	! Output of messages replaced by message handling routine.
78	! Output of several additional dvr parameters
79	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
80	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
81	! dp_smooth, dpdxy, u_bulk, v_bulk
82	! topography_grid_convention moved from user_header
83	! small bugfix concerning 3d 64bit netcdf output format
84	!
85	! 206 2008-10-13 14:59:11Z raasch
86	! Bugfix: error in zu index in case of section_xy = -1
87	!
88	! 198 2008-09-17 08:55:28Z raasch
89	! Format adjustments allowing output of larger revision numbers
90	!
91	! 197 2008-09-16 15:29:03Z raasch
92	! allow 100 spectra levels instead of 10 for consistency with
93	! define_netcdf_header,
94	! bugfix in the output of the characteristic levels of potential temperature,
95	! geostrophic wind, scalar concentration, humidity and leaf area density,
96	! output of turbulence recycling informations
97	!
98	! 138 2007-11-28 10:03:58Z letzel
99	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
100	! Allow two instead of one digit to specify isosurface and slicer variables.
101	! Output of sorting frequency of particles
102	!
103	! 108 2007-08-24 15:10:38Z letzel
104	! Output of informations for coupled model runs (boundary conditions etc.)
105	! + output of momentumfluxes at the top boundary
106	! Rayleigh damping for ocean, e_init
107	!
108	! 97 2007-06-21 08:23:15Z raasch
109	! Adjustments for the ocean version.
110	! use_pt_reference renamed use_reference
111	!
112	! 87 2007-05-22 15:46:47Z raasch
113	! Bugfix: output of use_upstream_for_tke
114	!
115	! 82 2007-04-16 15:40:52Z raasch
116	! Preprocessor strings for different linux clusters changed to "lc",
117	! routine local_flush is used for buffer flushing
118	!
119	! 76 2007-03-29 00:58:32Z raasch
120	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
121	! output of the loop optimization method, moisture renamed humidity,
122	! output of subversion revision number
123	!
124	! 19 2007-02-23 04:53:48Z raasch
125	! Output of scalar flux applied at top boundary
126	!
127	! RCS Log replace by Id keyword, revision history cleaned up
128	!
129	! Revision 1.63 2006/08/22 13:53:13 raasch
130	! Output of dz_max
131	!
132	! Revision 1.1 1997/08/11 06:17:20 raasch
133	! Initial revision
134	!
135	!
136	! Description:
137	! ------------
138	! Writing a header with all important informations about the actual run.
139	! This subroutine is called three times, two times at the beginning
140	! (writing information on files RUN_CONTROL and HEADER) and one time at the
141	! end of the run, then writing additional information about CPU-usage on file
142	! header.
143	!-----------------------------------------------------------------------------!
144
145	USE arrays_3d
146	USE control_parameters
147	USE cloud_parameters
148	USE cpulog
149	USE dvrp_variables
150	USE grid_variables
151	USE indices
152	USE model_1d
153	USE particle_attributes
154	USE pegrid
155	USE subsidence_mod
156	USE spectrum
157
158	IMPLICIT NONE
159
160	CHARACTER (LEN=1) :: prec
161	CHARACTER (LEN=2) :: do2d_mode
162	CHARACTER (LEN=5) :: section_chr
163	CHARACTER (LEN=9) :: time_to_string
164	CHARACTER (LEN=10) :: coor_chr, host_chr
165	CHARACTER (LEN=16) :: begin_chr
166	CHARACTER (LEN=23) :: ver_rev
167	CHARACTER (LEN=40) :: output_format
168	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
169	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
170	domask_chr, run_classification
171	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
172	temperatures, ugcomponent, vgcomponent
173	CHARACTER (LEN=85) :: roben, runten
174
175	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
176
177	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
178	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
179	REAL :: cpuseconds_per_simulated_second
180
181	!
182	!-- Open the output file. At the end of the simulation, output is directed
183	!-- to unit 19.
184	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
185	.NOT. simulated_time_at_begin /= simulated_time ) THEN
186	io = 15 ! header output on file RUN_CONTROL
187	ELSE
188	io = 19 ! header output on file HEADER
189	ENDIF
190	CALL check_open( io )
191
192	!
193	!-- At the end of the run, output file (HEADER) will be rewritten with
194	!-- new informations
195	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
196
197	!
198	!-- Determine kind of model run
199	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
200	run_classification = '3D - restart run'
201	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
202	run_classification = '3D - run with cyclic fill of 3D - prerun data'
203	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
204	run_classification = '3D - run without 1D - prerun'
205	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
206	run_classification = '3D - run with 1D - prerun'
207	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
208	run_classification = '3D - run initialized by user'
209	ELSE
210	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
211	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
212	ENDIF
213	IF ( ocean ) THEN
214	run_classification = 'ocean - ' // run_classification
215	ELSE
216	run_classification = 'atmosphere - ' // run_classification
217	ENDIF
218
219	!
220	!-- Run-identification, date, time, host
221	host_chr = host(1:10)
222	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
223	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
224	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
225	#if defined( __mpi2 )
226	mpi_type = 2
227	#else
228	mpi_type = 1
229	#endif
230	WRITE ( io, 101 ) mpi_type, coupling_mode
231	ENDIF
232	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
233	ADJUSTR( host_chr )
234	#if defined( __parallel )
235	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
236	char1 = 'calculated'
237	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
238	host(1:2) == 'lc' ) .AND. &
239	npex == -1 .AND. pdims(2) == 1 ) THEN
240	char1 = 'forced'
241	ELSE
242	char1 = 'predefined'
243	ENDIF
244	IF ( threads_per_task == 1 ) THEN
245	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
246	ELSE
247	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
248	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
249	ENDIF
250	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
251	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
252	npex == -1 .AND. pdims(2) == 1 ) &
253	THEN
254	WRITE ( io, 106 )
255	ELSEIF ( pdims(2) == 1 ) THEN
256	WRITE ( io, 107 ) 'x'
257	ELSEIF ( pdims(1) == 1 ) THEN
258	WRITE ( io, 107 ) 'y'
259	ENDIF
260	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
261	IF ( numprocs /= maximum_parallel_io_streams ) THEN
262	WRITE ( io, 108 ) maximum_parallel_io_streams
263	ENDIF
264	#endif
265	WRITE ( io, 99 )
266
267	!
268	!-- Numerical schemes
269	WRITE ( io, 110 )
270	IF ( psolver(1:7) == 'poisfft' ) THEN
271	WRITE ( io, 111 ) TRIM( fft_method )
272	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
273	ELSEIF ( psolver == 'sor' ) THEN
274	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
275	ELSEIF ( psolver == 'multigrid' ) THEN
276	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
277	IF ( mg_cycles == -1 ) THEN
278	WRITE ( io, 140 ) residual_limit
279	ELSE
280	WRITE ( io, 141 ) mg_cycles
281	ENDIF
282	IF ( mg_switch_to_pe0_level == 0 ) THEN
283	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
284	nzt_mg(1)
285	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
286	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
287	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
288	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
289	nzt_mg(mg_switch_to_pe0_level), &
290	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
291	nzt_mg(1)
292	ENDIF
293	IF ( masking_method ) WRITE ( io, 144 )
294	ENDIF
295	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
296	THEN
297	WRITE ( io, 142 )
298	ENDIF
299
300	IF ( momentum_advec == 'pw-scheme' ) THEN
301	WRITE ( io, 113 )
302	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
303	WRITE ( io, 503 )
304	ENDIF
305	IF ( scalar_advec == 'pw-scheme' ) THEN
306	WRITE ( io, 116 )
307	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
308	WRITE ( io, 504 )
309	ELSE
310	WRITE ( io, 118 )
311	ENDIF
312
313	WRITE ( io, 139 ) TRIM( loop_optimization )
314
315	IF ( galilei_transformation ) THEN
316	IF ( use_ug_for_galilei_tr ) THEN
317	char1 = '0.6 * geostrophic wind'
318	ELSE
319	char1 = 'mean wind in model domain'
320	ENDIF
321	IF ( simulated_time_at_begin == simulated_time ) THEN
322	char2 = 'at the start of the run'
323	ELSE
324	char2 = 'at the end of the run'
325	ENDIF
326	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
327	advected_distance_x/1000.0, advected_distance_y/1000.0
328	ENDIF
329	WRITE ( io, 122 ) timestep_scheme
330	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
331	IF ( rayleigh_damping_factor /= 0.0 ) THEN
332	IF ( .NOT. ocean ) THEN
333	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
334	rayleigh_damping_factor
335	ELSE
336	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
337	rayleigh_damping_factor
338	ENDIF
339	ENDIF
340	IF ( neutral ) WRITE ( io, 131 ) pt_surface
341	IF ( humidity ) THEN
342	IF ( .NOT. cloud_physics ) THEN
343	WRITE ( io, 129 )
344	ELSE
345	WRITE ( io, 130 )
346	ENDIF
347	ENDIF
348	IF ( passive_scalar ) WRITE ( io, 134 )
349	IF ( conserve_volume_flow ) THEN
350	WRITE ( io, 150 ) conserve_volume_flow_mode
351	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
352	WRITE ( io, 151 ) u_bulk, v_bulk
353	ENDIF
354	ELSEIF ( dp_external ) THEN
355	IF ( dp_smooth ) THEN
356	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
357	ELSE
358	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
359	ENDIF
360	ENDIF
361	IF ( large_scale_subsidence ) THEN
362	WRITE ( io, 153 )
363	WRITE ( io, 154 )
364	ENDIF
365	WRITE ( io, 99 )
366
367	!
368	!-- Runtime and timestep informations
369	WRITE ( io, 200 )
370	IF ( .NOT. dt_fixed ) THEN
371	WRITE ( io, 201 ) dt_max, cfl_factor
372	ELSE
373	WRITE ( io, 202 ) dt
374	ENDIF
375	WRITE ( io, 203 ) simulated_time_at_begin, end_time
376
377	IF ( time_restart /= 9999999.9 .AND. &
378	simulated_time_at_begin == simulated_time ) THEN
379	IF ( dt_restart == 9999999.9 ) THEN
380	WRITE ( io, 204 ) ' Restart at: ',time_restart
381	ELSE
382	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
383	ENDIF
384	ENDIF
385
386	IF ( simulated_time_at_begin /= simulated_time ) THEN
387	i = MAX ( log_point_s(10)%counts, 1 )
388	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
389	cpuseconds_per_simulated_second = 0.0
390	ELSE
391	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
392	( simulated_time - &
393	simulated_time_at_begin )
394	ENDIF
395	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
396	log_point_s(10)%sum / REAL( i ), &
397	cpuseconds_per_simulated_second
398	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
399	IF ( dt_restart == 9999999.9 ) THEN
400	WRITE ( io, 204 ) ' Next restart at: ',time_restart
401	ELSE
402	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
403	ENDIF
404	ENDIF
405	ENDIF
406
407	!
408	!-- Start time for coupled runs, if independent precursor runs for atmosphere
409	!-- and ocean are used. In this case, coupling_start_time defines the time
410	!-- when the coupling is switched on.
411	IF ( coupling_start_time /= 0.0 ) THEN
412	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
413	char1 = 'Precursor run for a coupled atmosphere-ocean run'
414	ELSE
415	char1 = 'Coupled atmosphere-ocean run following independent ' // &
416	'precursor runs'
417	ENDIF
418	WRITE ( io, 207 ) char1, coupling_start_time
419	ENDIF
420
421	!
422	!-- Computational grid
423	IF ( .NOT. ocean ) THEN
424	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
425	IF ( dz_stretch_level_index < nzt+1 ) THEN
426	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
427	dz_stretch_factor, dz_max
428	ENDIF
429	ELSE
430	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
431	IF ( dz_stretch_level_index > 0 ) THEN
432	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
433	dz_stretch_factor, dz_max
434	ENDIF
435	ENDIF
436	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
437	MIN( nnz+2, nzt+2 )
438	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
439
440	!
441	!-- Topography
442	WRITE ( io, 270 ) topography
443	SELECT CASE ( TRIM( topography ) )
444
445	CASE ( 'flat' )
446	! no actions necessary
447
448	CASE ( 'single_building' )
449	blx = INT( building_length_x / dx )
450	bly = INT( building_length_y / dy )
451	bh = INT( building_height / dz )
452
453	IF ( building_wall_left == 9999999.9 ) THEN
454	building_wall_left = ( nx + 1 - blx ) / 2 * dx
455	ENDIF
456	bxl = INT ( building_wall_left / dx + 0.5 )
457	bxr = bxl + blx
458
459	IF ( building_wall_south == 9999999.9 ) THEN
460	building_wall_south = ( ny + 1 - bly ) / 2 * dy
461	ENDIF
462	bys = INT ( building_wall_south / dy + 0.5 )
463	byn = bys + bly
464
465	WRITE ( io, 271 ) building_length_x, building_length_y, &
466	building_height, bxl, bxr, bys, byn
467
468	CASE ( 'single_street_canyon' )
469	ch = NINT( canyon_height / dz )
470	IF ( canyon_width_x /= 9999999.9 ) THEN
471	!
472	!-- Street canyon in y direction
473	cwx = NINT( canyon_width_x / dx )
474	IF ( canyon_wall_left == 9999999.9 ) THEN
475	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
476	ENDIF
477	cxl = NINT( canyon_wall_left / dx )
478	cxr = cxl + cwx
479	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
480
481	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
482	!
483	!-- Street canyon in x direction
484	cwy = NINT( canyon_width_y / dy )
485	IF ( canyon_wall_south == 9999999.9 ) THEN
486	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
487	ENDIF
488	cys = NINT( canyon_wall_south / dy )
489	cyn = cys + cwy
490	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
491	ENDIF
492
493	END SELECT
494
495	IF ( TRIM( topography ) /= 'flat' ) THEN
496	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
497	IF ( TRIM( topography ) == 'single_building' .OR. &
498	TRIM( topography ) == 'single_street_canyon' ) THEN
499	WRITE ( io, 278 )
500	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
501	WRITE ( io, 279 )
502	ENDIF
503	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
504	WRITE ( io, 278 )
505	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
506	WRITE ( io, 279 )
507	ENDIF
508	ENDIF
509
510	IF ( plant_canopy ) THEN
511
512	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
513	IF ( passive_scalar ) THEN
514	WRITE ( io, 281 ) scalar_exchange_coefficient, &
515	leaf_surface_concentration
516	ENDIF
517
518	!
519	!-- Heat flux at the top of vegetation
520	WRITE ( io, 282 ) cthf
521
522	!
523	!-- Leaf area density profile
524	!-- Building output strings, starting with surface value
525	WRITE ( learde, '(F6.4)' ) lad_surface
526	gradients = '------'
527	slices = ' 0'
528	coordinates = ' 0.0'
529	i = 1
530	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
531
532	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
533	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
534
535	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
536	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
537
538	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
539	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
540
541	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
542	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
543
544	i = i + 1
545	ENDDO
546
547	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
548	TRIM( gradients ), TRIM( slices )
549
550	ENDIF
551
552	!
553	!-- Boundary conditions
554	IF ( ibc_p_b == 0 ) THEN
555	runten = 'p(0) = 0 \|'
556	ELSEIF ( ibc_p_b == 1 ) THEN
557	runten = 'p(0) = p(1) \|'
558	ELSE
559	runten = 'p(0) = p(1) +R\|'
560	ENDIF
561	IF ( ibc_p_t == 0 ) THEN
562	roben = 'p(nzt+1) = 0 \|'
563	ELSE
564	roben = 'p(nzt+1) = p(nzt) \|'
565	ENDIF
566
567	IF ( ibc_uv_b == 0 ) THEN
568	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
569	ELSE
570	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
571	ENDIF
572	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
573	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
574	ELSEIF ( ibc_uv_t == 0 ) THEN
575	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
576	ELSE
577	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
578	ENDIF
579
580	IF ( ibc_pt_b == 0 ) THEN
581	runten = TRIM( runten ) // ' pt(0) = pt_surface'
582	ELSEIF ( ibc_pt_b == 1 ) THEN
583	runten = TRIM( runten ) // ' pt(0) = pt(1)'
584	ELSEIF ( ibc_pt_b == 2 ) THEN
585	runten = TRIM( runten ) // ' pt(0) = from coupled model'
586	ENDIF
587	IF ( ibc_pt_t == 0 ) THEN
588	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
589	ELSEIF( ibc_pt_t == 1 ) THEN
590	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
591	ELSEIF( ibc_pt_t == 2 ) THEN
592	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
593
594	ENDIF
595
596	WRITE ( io, 300 ) runten, roben
597
598	IF ( .NOT. constant_diffusion ) THEN
599	IF ( ibc_e_b == 1 ) THEN
600	runten = 'e(0) = e(1)'
601	ELSE
602	runten = 'e(0) = e(1) = (u/0.1)*2'
603	ENDIF
604	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
605
606	WRITE ( io, 301 ) 'e', runten, roben
607
608	ENDIF
609
610	IF ( ocean ) THEN
611	runten = 'sa(0) = sa(1)'
612	IF ( ibc_sa_t == 0 ) THEN
613	roben = 'sa(nzt+1) = sa_surface'
614	ELSE
615	roben = 'sa(nzt+1) = sa(nzt)'
616	ENDIF
617	WRITE ( io, 301 ) 'sa', runten, roben
618	ENDIF
619
620	IF ( humidity ) THEN
621	IF ( ibc_q_b == 0 ) THEN
622	runten = 'q(0) = q_surface'
623	ELSE
624	runten = 'q(0) = q(1)'
625	ENDIF
626	IF ( ibc_q_t == 0 ) THEN
627	roben = 'q(nzt) = q_top'
628	ELSE
629	roben = 'q(nzt) = q(nzt-1) + dq/dz'
630	ENDIF
631	WRITE ( io, 301 ) 'q', runten, roben
632	ENDIF
633
634	IF ( passive_scalar ) THEN
635	IF ( ibc_q_b == 0 ) THEN
636	runten = 's(0) = s_surface'
637	ELSE
638	runten = 's(0) = s(1)'
639	ENDIF
640	IF ( ibc_q_t == 0 ) THEN
641	roben = 's(nzt) = s_top'
642	ELSE
643	roben = 's(nzt) = s(nzt-1) + ds/dz'
644	ENDIF
645	WRITE ( io, 301 ) 's', runten, roben
646	ENDIF
647
648	IF ( use_surface_fluxes ) THEN
649	WRITE ( io, 303 )
650	IF ( constant_heatflux ) THEN
651	WRITE ( io, 306 ) surface_heatflux
652	IF ( random_heatflux ) WRITE ( io, 307 )
653	ENDIF
654	IF ( humidity .AND. constant_waterflux ) THEN
655	WRITE ( io, 311 ) surface_waterflux
656	ENDIF
657	IF ( passive_scalar .AND. constant_waterflux ) THEN
658	WRITE ( io, 313 ) surface_waterflux
659	ENDIF
660	ENDIF
661
662	IF ( use_top_fluxes ) THEN
663	WRITE ( io, 304 )
664	IF ( coupling_mode == 'uncoupled' ) THEN
665	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
666	IF ( constant_top_heatflux ) THEN
667	WRITE ( io, 306 ) top_heatflux
668	ENDIF
669	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
670	WRITE ( io, 316 )
671	ENDIF
672	IF ( ocean .AND. constant_top_salinityflux ) THEN
673	WRITE ( io, 309 ) top_salinityflux
674	ENDIF
675	IF ( humidity .OR. passive_scalar ) THEN
676	WRITE ( io, 315 )
677	ENDIF
678	ENDIF
679
680	IF ( prandtl_layer ) THEN
681	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
682	z0h_factor*roughness_length, kappa, &
683	rif_min, rif_max
684	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
685	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
686	WRITE ( io, 312 )
687	ENDIF
688	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
689	WRITE ( io, 314 )
690	ENDIF
691	ELSE
692	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
693	WRITE ( io, 310 ) rif_min, rif_max
694	ENDIF
695	ENDIF
696
697	WRITE ( io, 317 ) bc_lr, bc_ns
698	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
699	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
700	IF ( turbulent_inflow ) THEN
701	WRITE ( io, 319 ) recycling_width, recycling_plane, &
702	inflow_damping_height, inflow_damping_width
703	ENDIF
704	ENDIF
705
706	!
707	!-- Listing of 1D-profiles
708	WRITE ( io, 325 ) dt_dopr_listing
709	IF ( averaging_interval_pr /= 0.0 ) THEN
710	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
711	ENDIF
712
713	!
714	!-- DATA output
715	WRITE ( io, 330 )
716	IF ( averaging_interval_pr /= 0.0 ) THEN
717	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
718	ENDIF
719
720	!
721	!-- 1D-profiles
722	dopr_chr = 'Profile:'
723	IF ( dopr_n /= 0 ) THEN
724	WRITE ( io, 331 )
725
726	output_format = ''
727	IF ( netcdf_output ) THEN
728	IF ( netcdf_data_format == 1 ) THEN
729	output_format = 'NetCDF classic'
730	ELSE
731	output_format = 'NetCDF 64bit offset'
732	ENDIF
733	ENDIF
734	WRITE ( io, 344 ) output_format
735
736	DO i = 1, dopr_n
737	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
738	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
739	WRITE ( io, 332 ) dopr_chr
740	dopr_chr = ' :'
741	ENDIF
742	ENDDO
743
744	IF ( dopr_chr /= '' ) THEN
745	WRITE ( io, 332 ) dopr_chr
746	ENDIF
747	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
748	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
749	ENDIF
750
751	!
752	!-- 2D-arrays
753	DO av = 0, 1
754
755	i = 1
756	do2d_xy = ''
757	do2d_xz = ''
758	do2d_yz = ''
759	DO WHILE ( do2d(av,i) /= ' ' )
760
761	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
762	do2d_mode = do2d(av,i)(l-1:l)
763
764	SELECT CASE ( do2d_mode )
765	CASE ( 'xy' )
766	ll = LEN_TRIM( do2d_xy )
767	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
768	CASE ( 'xz' )
769	ll = LEN_TRIM( do2d_xz )
770	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
771	CASE ( 'yz' )
772	ll = LEN_TRIM( do2d_yz )
773	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
774	END SELECT
775
776	i = i + 1
777
778	ENDDO
779
780	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
781	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
782	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
783	( netcdf_output .OR. iso2d_output ) ) THEN
784
785	IF ( av == 0 ) THEN
786	WRITE ( io, 334 ) ''
787	ELSE
788	WRITE ( io, 334 ) '(time-averaged)'
789	ENDIF
790
791	IF ( do2d_at_begin ) THEN
792	begin_chr = 'and at the start'
793	ELSE
794	begin_chr = ''
795	ENDIF
796
797	output_format = ''
798	IF ( netcdf_output ) THEN
799	IF ( netcdf_data_format == 1 ) THEN
800	output_format = 'NetCDF classic'
801	ELSEIF ( netcdf_data_format == 2 ) THEN
802	output_format = 'NetCDF 64bit offset'
803	ELSEIF ( netcdf_data_format == 3 ) THEN
804	output_format = 'NetCDF4/HDF5'
805	ELSEIF ( netcdf_data_format == 4 ) THEN
806	output_format = 'NetCDF4/HDF5 clasic'
807	ENDIF
808	ENDIF
809	IF ( iso2d_output ) THEN
810	IF ( netcdf_output ) THEN
811	output_format = TRIM( output_format ) // ' and iso2d'
812	ELSE
813	output_format = 'iso2d'
814	ENDIF
815	ENDIF
816	WRITE ( io, 344 ) output_format
817
818	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
819	i = 1
820	slices = '/'
821	coordinates = '/'
822	!
823	!-- Building strings with index and coordinate informations of the
824	!-- slices
825	DO WHILE ( section(i,1) /= -9999 )
826
827	WRITE (section_chr,'(I5)') section(i,1)
828	section_chr = ADJUSTL( section_chr )
829	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
830
831	IF ( section(i,1) == -1 ) THEN
832	WRITE (coor_chr,'(F10.1)') -1.0
833	ELSE
834	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
835	ENDIF
836	coor_chr = ADJUSTL( coor_chr )
837	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
838
839	i = i + 1
840	ENDDO
841	IF ( av == 0 ) THEN
842	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
843	TRIM( begin_chr ), 'k', TRIM( slices ), &
844	TRIM( coordinates )
845	IF ( skip_time_do2d_xy /= 0.0 ) THEN
846	WRITE ( io, 339 ) skip_time_do2d_xy
847	ENDIF
848	ELSE
849	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
850	TRIM( begin_chr ), averaging_interval, &
851	dt_averaging_input, 'k', TRIM( slices ), &
852	TRIM( coordinates )
853	IF ( skip_time_data_output_av /= 0.0 ) THEN
854	WRITE ( io, 339 ) skip_time_data_output_av
855	ENDIF
856	ENDIF
857
858	ENDIF
859
860	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
861	i = 1
862	slices = '/'
863	coordinates = '/'
864	!
865	!-- Building strings with index and coordinate informations of the
866	!-- slices
867	DO WHILE ( section(i,2) /= -9999 )
868
869	WRITE (section_chr,'(I5)') section(i,2)
870	section_chr = ADJUSTL( section_chr )
871	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
872
873	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
874	coor_chr = ADJUSTL( coor_chr )
875	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
876
877	i = i + 1
878	ENDDO
879	IF ( av == 0 ) THEN
880	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
881	TRIM( begin_chr ), 'j', TRIM( slices ), &
882	TRIM( coordinates )
883	IF ( skip_time_do2d_xz /= 0.0 ) THEN
884	WRITE ( io, 339 ) skip_time_do2d_xz
885	ENDIF
886	ELSE
887	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
888	TRIM( begin_chr ), averaging_interval, &
889	dt_averaging_input, 'j', TRIM( slices ), &
890	TRIM( coordinates )
891	IF ( skip_time_data_output_av /= 0.0 ) THEN
892	WRITE ( io, 339 ) skip_time_data_output_av
893	ENDIF
894	ENDIF
895	ENDIF
896
897	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
898	i = 1
899	slices = '/'
900	coordinates = '/'
901	!
902	!-- Building strings with index and coordinate informations of the
903	!-- slices
904	DO WHILE ( section(i,3) /= -9999 )
905
906	WRITE (section_chr,'(I5)') section(i,3)
907	section_chr = ADJUSTL( section_chr )
908	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
909
910	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
911	coor_chr = ADJUSTL( coor_chr )
912	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
913
914	i = i + 1
915	ENDDO
916	IF ( av == 0 ) THEN
917	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
918	TRIM( begin_chr ), 'i', TRIM( slices ), &
919	TRIM( coordinates )
920	IF ( skip_time_do2d_yz /= 0.0 ) THEN
921	WRITE ( io, 339 ) skip_time_do2d_yz
922	ENDIF
923	ELSE
924	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
925	TRIM( begin_chr ), averaging_interval, &
926	dt_averaging_input, 'i', TRIM( slices ), &
927	TRIM( coordinates )
928	IF ( skip_time_data_output_av /= 0.0 ) THEN
929	WRITE ( io, 339 ) skip_time_data_output_av
930	ENDIF
931	ENDIF
932	ENDIF
933
934	ENDIF
935
936	ENDDO
937
938	!
939	!-- 3d-arrays
940	DO av = 0, 1
941
942	i = 1
943	do3d_chr = ''
944	DO WHILE ( do3d(av,i) /= ' ' )
945
946	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
947	i = i + 1
948
949	ENDDO
950
951	IF ( do3d_chr /= '' ) THEN
952	IF ( av == 0 ) THEN
953	WRITE ( io, 336 ) ''
954	ELSE
955	WRITE ( io, 336 ) '(time-averaged)'
956	ENDIF
957
958	output_format = ''
959	IF ( netcdf_output ) THEN
960	IF ( netcdf_data_format == 1 ) THEN
961	output_format = 'NetCDF classic'
962	ELSEIF ( netcdf_data_format == 2 ) THEN
963	output_format = 'NetCDF 64bit offset'
964	ELSEIF ( netcdf_data_format == 3 ) THEN
965	output_format = 'NetCDF4/HDF5'
966	ELSEIF ( netcdf_data_format == 4 ) THEN
967	output_format = 'NetCDF4/HDF5 clasic'
968	ENDIF
969	ENDIF
970	IF ( avs_output ) THEN
971	IF ( netcdf_output ) THEN
972	output_format = TRIM( output_format ) // ' and avs'
973	ELSE
974	output_format = 'avs'
975	ENDIF
976	ENDIF
977	WRITE ( io, 344 ) output_format
978
979	IF ( do3d_at_begin ) THEN
980	begin_chr = 'and at the start'
981	ELSE
982	begin_chr = ''
983	ENDIF
984	IF ( av == 0 ) THEN
985	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
986	zu(nz_do3d), nz_do3d
987	ELSE
988	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
989	TRIM( begin_chr ), averaging_interval, &
990	dt_averaging_input, zu(nz_do3d), nz_do3d
991	ENDIF
992
993	IF ( do3d_compress ) THEN
994	do3d_chr = ''
995	i = 1
996	DO WHILE ( do3d(av,i) /= ' ' )
997
998	SELECT CASE ( do3d(av,i) )
999	CASE ( 'u' )
1000	j = 1
1001	CASE ( 'v' )
1002	j = 2
1003	CASE ( 'w' )
1004	j = 3
1005	CASE ( 'p' )
1006	j = 4
1007	CASE ( 'pt' )
1008	j = 5
1009	END SELECT
1010	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1011	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1012	':' // prec // ','
1013	i = i + 1
1014
1015	ENDDO
1016	WRITE ( io, 338 ) do3d_chr
1017
1018	ENDIF
1019
1020	IF ( av == 0 ) THEN
1021	IF ( skip_time_do3d /= 0.0 ) THEN
1022	WRITE ( io, 339 ) skip_time_do3d
1023	ENDIF
1024	ELSE
1025	IF ( skip_time_data_output_av /= 0.0 ) THEN
1026	WRITE ( io, 339 ) skip_time_data_output_av
1027	ENDIF
1028	ENDIF
1029
1030	ENDIF
1031
1032	ENDDO
1033
1034	!
1035	!-- masked arrays
1036	IF ( masks > 0 ) WRITE ( io, 345 ) &
1037	mask_scale_x, mask_scale_y, mask_scale_z
1038	DO mid = 1, masks
1039	DO av = 0, 1
1040
1041	i = 1
1042	domask_chr = ''
1043	DO WHILE ( domask(mid,av,i) /= ' ' )
1044	domask_chr = TRIM( domask_chr ) // ' ' // &
1045	TRIM( domask(mid,av,i) ) // ','
1046	i = i + 1
1047	ENDDO
1048
1049	IF ( domask_chr /= '' ) THEN
1050	IF ( av == 0 ) THEN
1051	WRITE ( io, 346 ) '', mid
1052	ELSE
1053	WRITE ( io, 346 ) ' (time-averaged)', mid
1054	ENDIF
1055
1056	output_format = ''
1057	IF ( netcdf_output ) THEN
1058	IF ( netcdf_data_format == 1 ) THEN
1059	output_format = 'NetCDF classic'
1060	ELSEIF ( netcdf_data_format == 2 ) THEN
1061	output_format = 'NetCDF 64bit offset'
1062	ELSEIF ( netcdf_data_format == 3 ) THEN
1063	output_format = 'NetCDF4/HDF5'
1064	ELSEIF ( netcdf_data_format == 4 ) THEN
1065	output_format = 'NetCDF4/HDF5 clasic'
1066	ENDIF
1067	ENDIF
1068	WRITE ( io, 344 ) output_format
1069
1070	IF ( av == 0 ) THEN
1071	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1072	ELSE
1073	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1074	averaging_interval, dt_averaging_input
1075	ENDIF
1076
1077	IF ( av == 0 ) THEN
1078	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1079	WRITE ( io, 339 ) skip_time_domask(mid)
1080	ENDIF
1081	ELSE
1082	IF ( skip_time_data_output_av /= 0.0 ) THEN
1083	WRITE ( io, 339 ) skip_time_data_output_av
1084	ENDIF
1085	ENDIF
1086	!
1087	!-- output locations
1088	DO dim = 1, 3
1089	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1090	count = 0
1091	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1092	count = count + 1
1093	ENDDO
1094	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1095	mask(mid,dim,:count)
1096	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1097	mask_loop(mid,dim,2) < 0.0 .AND. &
1098	mask_loop(mid,dim,3) == 0.0 ) THEN
1099	WRITE ( io, 350 ) dir(dim), dir(dim)
1100	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1101	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1102	mask_loop(mid,dim,1:2)
1103	ELSE
1104	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1105	mask_loop(mid,dim,1:3)
1106	ENDIF
1107	ENDDO
1108	ENDIF
1109
1110	ENDDO
1111	ENDDO
1112
1113	!
1114	!-- Timeseries
1115	IF ( dt_dots /= 9999999.9 ) THEN
1116	WRITE ( io, 340 )
1117
1118	output_format = ''
1119	IF ( netcdf_output ) THEN
1120	IF ( netcdf_data_format == 1 ) THEN
1121	output_format = 'NetCDF classic'
1122	ELSE
1123	output_format = 'NetCDF 64bit offset'
1124	ENDIF
1125	ENDIF
1126	WRITE ( io, 344 ) output_format
1127	WRITE ( io, 341 ) dt_dots
1128	ENDIF
1129
1130	#if defined( __dvrp_graphics )
1131	!
1132	!-- Dvrp-output
1133	IF ( dt_dvrp /= 9999999.9 ) THEN
1134	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1135	TRIM( dvrp_username ), TRIM( dvrp_directory )
1136	i = 1
1137	l = 0
1138	m = 0
1139	DO WHILE ( mode_dvrp(i) /= ' ' )
1140	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1141	READ ( mode_dvrp(i), '(10X,I2)' ) j
1142	l = l + 1
1143	IF ( do3d(0,j) /= ' ' ) THEN
1144	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1145	isosurface_color(:,l)
1146	ENDIF
1147	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1148	READ ( mode_dvrp(i), '(6X,I2)' ) j
1149	m = m + 1
1150	IF ( do2d(0,j) /= ' ' ) THEN
1151	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1152	slicer_range_limits_dvrp(:,m)
1153	ENDIF
1154	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1155	WRITE ( io, 363 ) dvrp_psize
1156	IF ( particle_dvrpsize /= 'none' ) THEN
1157	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1158	dvrpsize_interval
1159	ENDIF
1160	IF ( particle_color /= 'none' ) THEN
1161	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1162	color_interval
1163	ENDIF
1164	ENDIF
1165	i = i + 1
1166	ENDDO
1167
1168	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1169	superelevation_y, superelevation, clip_dvrp_l, &
1170	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1171
1172	IF ( TRIM( topography ) /= 'flat' ) THEN
1173	WRITE ( io, 366 ) topography_color
1174	IF ( cluster_size > 1 ) THEN
1175	WRITE ( io, 367 ) cluster_size
1176	ENDIF
1177	ENDIF
1178
1179	ENDIF
1180	#endif
1181
1182	#if defined( __spectra )
1183	!
1184	!-- Spectra output
1185	IF ( dt_dosp /= 9999999.9 ) THEN
1186	WRITE ( io, 370 )
1187
1188	output_format = ''
1189	IF ( netcdf_output ) THEN
1190	IF ( netcdf_data_format == 1 ) THEN
1191	output_format = 'NetCDF classic'
1192	ELSE
1193	output_format = 'NetCDF 64bit offset'
1194	ENDIF
1195	ENDIF
1196	WRITE ( io, 344 ) output_format
1197	WRITE ( io, 371 ) dt_dosp
1198	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1199	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1200	( spectra_direction(i), i = 1,10 ), &
1201	( comp_spectra_level(i), i = 1,100 ), &
1202	( plot_spectra_level(i), i = 1,100 ), &
1203	averaging_interval_sp, dt_averaging_input_pr
1204	ENDIF
1205	#endif
1206
1207	WRITE ( io, 99 )
1208
1209	!
1210	!-- Physical quantities
1211	WRITE ( io, 400 )
1212
1213	!
1214	!-- Geostrophic parameters
1215	WRITE ( io, 410 ) omega, phi, f, fs
1216
1217	!
1218	!-- Other quantities
1219	WRITE ( io, 411 ) g
1220	IF ( use_reference ) THEN
1221	IF ( ocean ) THEN
1222	WRITE ( io, 412 ) prho_reference
1223	ELSE
1224	WRITE ( io, 413 ) pt_reference
1225	ENDIF
1226	ENDIF
1227
1228	!
1229	!-- Cloud physics parameters
1230	IF ( cloud_physics ) THEN
1231	WRITE ( io, 415 )
1232	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1233	ENDIF
1234
1235	!-- Profile of the geostrophic wind (component ug)
1236	!-- Building output strings
1237	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1238	gradients = '------'
1239	slices = ' 0'
1240	coordinates = ' 0.0'
1241	i = 1
1242	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1243
1244	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1245	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1246
1247	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1248	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1249
1250	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1251	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1252
1253	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1254	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1255
1256	IF ( i == 10 ) THEN
1257	EXIT
1258	ELSE
1259	i = i + 1
1260	ENDIF
1261
1262	ENDDO
1263
1264	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1265	TRIM( gradients ), TRIM( slices )
1266
1267	!-- Profile of the geostrophic wind (component vg)
1268	!-- Building output strings
1269	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1270	gradients = '------'
1271	slices = ' 0'
1272	coordinates = ' 0.0'
1273	i = 1
1274	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1275
1276	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1277	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1278
1279	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1280	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1281
1282	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1283	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1284
1285	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1286	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1287
1288	IF ( i == 10 ) THEN
1289	EXIT
1290	ELSE
1291	i = i + 1
1292	ENDIF
1293
1294	ENDDO
1295
1296	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1297	TRIM( gradients ), TRIM( slices )
1298
1299	!
1300	!-- Initial wind profiles
1301	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1302
1303	!
1304	!-- Initial temperature profile
1305	!-- Building output strings, starting with surface temperature
1306	WRITE ( temperatures, '(F6.2)' ) pt_surface
1307	gradients = '------'
1308	slices = ' 0'
1309	coordinates = ' 0.0'
1310	i = 1
1311	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1312
1313	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1314	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1315
1316	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1317	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1318
1319	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1320	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1321
1322	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1323	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1324
1325	IF ( i == 10 ) THEN
1326	EXIT
1327	ELSE
1328	i = i + 1
1329	ENDIF
1330
1331	ENDDO
1332
1333	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1334	TRIM( gradients ), TRIM( slices )
1335
1336	!
1337	!-- Initial humidity profile
1338	!-- Building output strings, starting with surface humidity
1339	IF ( humidity .OR. passive_scalar ) THEN
1340	WRITE ( temperatures, '(E8.1)' ) q_surface
1341	gradients = '--------'
1342	slices = ' 0'
1343	coordinates = ' 0.0'
1344	i = 1
1345	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1346
1347	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1348	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1349
1350	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1351	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1352
1353	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1354	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1355
1356	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1357	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1358
1359	IF ( i == 10 ) THEN
1360	EXIT
1361	ELSE
1362	i = i + 1
1363	ENDIF
1364
1365	ENDDO
1366
1367	IF ( humidity ) THEN
1368	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1369	TRIM( gradients ), TRIM( slices )
1370	ELSE
1371	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1372	TRIM( gradients ), TRIM( slices )
1373	ENDIF
1374	ENDIF
1375
1376	!
1377	!-- Initial salinity profile
1378	!-- Building output strings, starting with surface salinity
1379	IF ( ocean ) THEN
1380	WRITE ( temperatures, '(F6.2)' ) sa_surface
1381	gradients = '------'
1382	slices = ' 0'
1383	coordinates = ' 0.0'
1384	i = 1
1385	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1386
1387	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1388	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1389
1390	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1391	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1392
1393	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1394	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1395
1396	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1397	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1398
1399	IF ( i == 10 ) THEN
1400	EXIT
1401	ELSE
1402	i = i + 1
1403	ENDIF
1404
1405	ENDDO
1406
1407	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1408	TRIM( gradients ), TRIM( slices )
1409	ENDIF
1410
1411	!
1412	!-- Profile for the large scale vertial velocity
1413	!-- Building output strings, starting with surface value
1414	IF ( large_scale_subsidence ) THEN
1415	temperatures = ' 0.0'
1416	gradients = '------'
1417	slices = ' 0'
1418	coordinates = ' 0.0'
1419	i = 1
1420	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1421
1422	WRITE (coor_chr,'(E10.2,7X)') &
1423	w_subs(subs_vertical_gradient_level_i(i))
1424	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1425
1426	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1427	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1428
1429	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1430	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1431
1432	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1433	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1434
1435	IF ( i == 10 ) THEN
1436	EXIT
1437	ELSE
1438	i = i + 1
1439	ENDIF
1440
1441	ENDDO
1442
1443	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1444	TRIM( gradients ), TRIM( slices )
1445	ENDIF
1446
1447	!
1448	!-- Cloud physcis parameters / quantities / numerical methods
1449	WRITE ( io, 430 )
1450	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1451	WRITE ( io, 431 )
1452	ELSEIF ( humidity .AND. cloud_physics ) THEN
1453	WRITE ( io, 432 )
1454	IF ( radiation ) WRITE ( io, 132 )
1455	IF ( precipitation ) WRITE ( io, 133 )
1456	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1457	WRITE ( io, 433 )
1458	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1459	IF ( collision_kernel /= 'none' ) THEN
1460	WRITE ( io, 435 ) TRIM( collision_kernel )
1461	IF ( collision_kernel(6:9) == 'fast' ) THEN
1462	WRITE ( io, 436 ) radius_classes, dissipation_classes
1463	ENDIF
1464	ELSE
1465	WRITE ( io, 437 )
1466	ENDIF
1467	ENDIF
1468
1469	!
1470	!-- LES / turbulence parameters
1471	WRITE ( io, 450 )
1472
1473	!--
1474	! ... LES-constants used must still be added here
1475	!--
1476	IF ( constant_diffusion ) THEN
1477	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1478	prandtl_number
1479	ENDIF
1480	IF ( .NOT. constant_diffusion) THEN
1481	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1482	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1483	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1484	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1485	ENDIF
1486
1487	!
1488	!-- Special actions during the run
1489	WRITE ( io, 470 )
1490	IF ( create_disturbances ) THEN
1491	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1492	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1493	zu(disturbance_level_ind_t), disturbance_level_ind_t
1494	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1495	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1496	ELSE
1497	WRITE ( io, 473 ) disturbance_energy_limit
1498	ENDIF
1499	WRITE ( io, 474 ) TRIM( random_generator )
1500	ENDIF
1501	IF ( pt_surface_initial_change /= 0.0 ) THEN
1502	WRITE ( io, 475 ) pt_surface_initial_change
1503	ENDIF
1504	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1505	WRITE ( io, 476 ) q_surface_initial_change
1506	ENDIF
1507	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1508	WRITE ( io, 477 ) q_surface_initial_change
1509	ENDIF
1510
1511	IF ( particle_advection ) THEN
1512	!
1513	!-- Particle attributes
1514	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1515	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1516	end_time_prel, dt_sort_particles
1517	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1518	IF ( random_start_position ) WRITE ( io, 481 )
1519	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1520	WRITE ( io, 495 ) total_number_of_particles
1521	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1522	WRITE ( io, 483 ) maximum_number_of_tailpoints
1523	IF ( minimum_tailpoint_distance /= 0 ) THEN
1524	WRITE ( io, 484 ) total_number_of_tails, &
1525	minimum_tailpoint_distance, &
1526	maximum_tailpoint_age
1527	ENDIF
1528	ENDIF
1529	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1530	WRITE ( io, 485 ) dt_write_particle_data
1531	output_format = ''
1532	IF ( netcdf_output ) THEN
1533	IF ( netcdf_data_format > 1 ) THEN
1534	output_format = 'netcdf (64 bit offset) and binary'
1535	ELSE
1536	output_format = 'netcdf and binary'
1537	ENDIF
1538	ELSE
1539	output_format = 'binary'
1540	ENDIF
1541	WRITE ( io, 344 ) output_format
1542	ENDIF
1543	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1544	IF ( write_particle_statistics ) WRITE ( io, 486 )
1545
1546	WRITE ( io, 487 ) number_of_particle_groups
1547
1548	DO i = 1, number_of_particle_groups
1549	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1550	WRITE ( io, 490 ) i, 0.0
1551	WRITE ( io, 492 )
1552	ELSE
1553	WRITE ( io, 490 ) i, radius(i)
1554	IF ( density_ratio(i) /= 0.0 ) THEN
1555	WRITE ( io, 491 ) density_ratio(i)
1556	ELSE
1557	WRITE ( io, 492 )
1558	ENDIF
1559	ENDIF
1560	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1561	pdx(i), pdy(i), pdz(i)
1562	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1563	ENDDO
1564
1565	ENDIF
1566
1567
1568	!
1569	!-- Parameters of 1D-model
1570	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1571	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1572	mixing_length_1d, dissipation_1d
1573	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1574	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1575	ENDIF
1576	ENDIF
1577
1578	!
1579	!-- User-defined informations
1580	CALL user_header( io )
1581
1582	WRITE ( io, 99 )
1583
1584	!
1585	!-- Write buffer contents to disc immediately
1586	CALL local_flush( io )
1587
1588	!
1589	!-- Here the FORMATs start
1590
1591	99 FORMAT (1X,78('-'))
1592	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1593	1X,'* ',A,' *',9X,A/ &
1594	1X,'***************************',9X,42('-'))
1595	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1596	37X,42('-'))
1597	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1598	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1599	' Run on host: ',A10)
1600	#if defined( __parallel )
1601	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1602	')',1X,A)
1603	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1604	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1605	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1606	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1607	37X,'because the job is running on an SMP-cluster')
1608	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1609	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1610	#endif
1611	110 FORMAT (/' Numerical Schemes:'/ &
1612	' -----------------'/)
1613	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1614	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1615	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1616	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1617	' or Upstream')
1618	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1619	' or Upstream')
1620	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1621	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1622	' Translation velocity = ',A/ &
1623	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1624	122 FORMAT (' --> Time differencing scheme: ',A)
1625	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1626	' maximum damping coefficient: ',F5.3, ' 1/s')
1627	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1628	130 FORMAT (' --> Additional prognostic equation for the total water content')
1629	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1630	F6.2, ' K assumed')
1631	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1632	' effective emissivity scheme')
1633	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1634	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1635	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1636	A,'-cycle)'/ &
1637	' number of grid levels: ',I2/ &
1638	' Gauss-Seidel red/black iterations: ',I2)
1639	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1640	I3,')')
1641	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1642	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1643	I3,')'/ &
1644	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1645	I3,')')
1646	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1647	139 FORMAT (' --> Loop optimization method: ',A)
1648	140 FORMAT (' maximum residual allowed: ',E10.3)
1649	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1650	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1651	'step')
1652	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1653	'kinetic energy')
1654	144 FORMAT (' masking method is used')
1655	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1656	'conserved'/ &
1657	' using the ',A,' mode')
1658	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1659	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1660	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1661	/' starting from dp_level_b =', F8.3, 'm', A /)
1662	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1663	'prognostic equation for')
1664	154 FORMAT (' the potential temperature')
1665	200 FORMAT (//' Run time and time step information:'/ &
1666	' ----------------------------------'/)
1667	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1668	' CFL-factor: ',F4.2)
1669	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1670	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1671	' End time: ',F9.3,' s')
1672	204 FORMAT ( A,F9.3,' s')
1673	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1674	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1675	' CPU-time used: ',F9.3,' s per timestep: ', &
1676	' ',F9.3,' s'/ &
1677	' per second of simulated tim', &
1678	'e: ',F9.3,' s')
1679	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1680	250 FORMAT (//' Computational grid and domain size:'/ &
1681	' ----------------------------------'// &
1682	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1683	' m dz = ',F7.3,' m'/ &
1684	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1685	' m z(u) = ',F10.3,' m'/)
1686	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1687	' factor: ',F5.3/ &
1688	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1689	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1690	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1691	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1692	' degrees')
1693	270 FORMAT (//' Topography informations:'/ &
1694	' -----------------------'// &
1695	1X,'Topography: ',A)
1696	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1697	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1698	' / ',I4)
1699	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1700	' direction' / &
1701	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1702	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1703	278 FORMAT (' Topography grid definition convention:'/ &
1704	' cell edge (staggered grid points'/ &
1705	' (u in x-direction, v in y-direction))' /)
1706	279 FORMAT (' Topography grid definition convention:'/ &
1707	' cell center (scalar grid points)' /)
1708	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1709	' ------------------------------'// &
1710	' Canopy mode: ', A / &
1711	' Canopy top: ',I4 / &
1712	' Leaf drag coefficient: ',F6.2 /)
1713	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1714	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1715	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1716	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1717	' Height: ',A,' m'/ &
1718	' Leaf area density: ',A,' m2/m3'/ &
1719	' Gradient: ',A,' m2/m4'/ &
1720	' Gridpoint: ',A)
1721
1722	300 FORMAT (//' Boundary conditions:'/ &
1723	' -------------------'// &
1724	' p uv ', &
1725	' pt'// &
1726	' B. bound.: ',A/ &
1727	' T. bound.: ',A)
1728	301 FORMAT (/' ',A// &
1729	' B. bound.: ',A/ &
1730	' T. bound.: ',A)
1731	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1732	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1733	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1734	'computational u,v-level:'// &
1735	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1736	' m kappa = ',F4.2/ &
1737	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1738	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1739	307 FORMAT (' Heatflux has a random normal distribution')
1740	308 FORMAT (' Predefined surface temperature')
1741	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1742	310 FORMAT (//' 1D-Model:'// &
1743	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1744	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1745	312 FORMAT (' Predefined surface humidity')
1746	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1747	314 FORMAT (' Predefined scalar value at the surface')
1748	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1749	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1750	'atmosphere model')
1751	317 FORMAT (//' Lateral boundaries:'/ &
1752	' left/right: ',A/ &
1753	' north/south: ',A)
1754	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1755	'damping factor = ',F6.4)
1756	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1757	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1758	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1759	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1760	' v: ',F9.6,' m2/s2')
1761	325 FORMAT (//' List output:'/ &
1762	' -----------'// &
1763	' 1D-Profiles:'/ &
1764	' Output every ',F8.2,' s')
1765	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1766	' Averaging input every ',F8.2,' s')
1767	330 FORMAT (//' Data output:'/ &
1768	' -----------'/)
1769	331 FORMAT (/' 1D-Profiles:')
1770	332 FORMAT (/' ',A)
1771	333 FORMAT (' Output every ',F8.2,' s',/ &
1772	' Time averaged over ',F8.2,' s'/ &
1773	' Averaging input every ',F8.2,' s')
1774	334 FORMAT (/' 2D-Arrays',A,':')
1775	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1776	' Output every ',F8.2,' s ',A/ &
1777	' Cross sections at ',A1,' = ',A/ &
1778	' scalar-coordinates: ',A,' m'/)
1779	336 FORMAT (/' 3D-Arrays',A,':')
1780	337 FORMAT (/' Arrays: ',A/ &
1781	' Output every ',F8.2,' s ',A/ &
1782	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1783	338 FORMAT (' Compressed data output'/ &
1784	' Decimal precision: ',A/)
1785	339 FORMAT (' No output during initial ',F8.2,' s')
1786	340 FORMAT (/' Time series:')
1787	341 FORMAT (' Output every ',F8.2,' s'/)
1788	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1789	' Output every ',F8.2,' s ',A/ &
1790	' Time averaged over ',F8.2,' s'/ &
1791	' Averaging input every ',F8.2,' s'/ &
1792	' Cross sections at ',A1,' = ',A/ &
1793	' scalar-coordinates: ',A,' m'/)
1794	343 FORMAT (/' Arrays: ',A/ &
1795	' Output every ',F8.2,' s ',A/ &
1796	' Time averaged over ',F8.2,' s'/ &
1797	' Averaging input every ',F8.2,' s'/ &
1798	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1799	344 FORMAT (' Output format: ',A/)
1800	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1801	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1802	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1803	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1804	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1805	347 FORMAT (' Variables: ',A/ &
1806	' Output every ',F8.2,' s')
1807	348 FORMAT (' Variables: ',A/ &
1808	' Output every ',F8.2,' s'/ &
1809	' Time averaged over ',F8.2,' s'/ &
1810	' Averaging input every ',F8.2,' s')
1811	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1812	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1813	13(' ',8(F8.2,',')/) )
1814	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1815	'all gridpoints along ',A,'-direction (default).' )
1816	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1817	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1818	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1819	#if defined( __dvrp_graphics )
1820	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1821	' Output every ',F7.1,' s'/ &
1822	' Output mode: ',A/ &
1823	' Host / User: ',A,' / ',A/ &
1824	' Directory: ',A// &
1825	' The sequence contains:')
1826	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1827	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1828	362 FORMAT (/' Slicer plane ',A/ &
1829	' Slicer limits: [',F6.2,',',F6.2,']')
1830	363 FORMAT (/' Particles'/ &
1831	' particle size: ',F7.2,' m')
1832	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1833	F6.2,',',F6.2,']')
1834	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1835	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1836	')'/ &
1837	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1838	' from y = ',F9.1,' m to y = ',F9.1,' m')
1839	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1840	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1841	#endif
1842	#if defined( __spectra )
1843	370 FORMAT (' Spectra:')
1844	371 FORMAT (' Output every ',F7.1,' s'/)
1845	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1846	' Directions: ', 10(A5,',')/ &
1847	' height levels k = ', 20(I3,',')/ &
1848	' ', 20(I3,',')/ &
1849	' ', 20(I3,',')/ &
1850	' ', 20(I3,',')/ &
1851	' ', 19(I3,','),I3,'.'/ &
1852	' height levels selected for standard plot:'/ &
1853	' k = ', 20(I3,',')/ &
1854	' ', 20(I3,',')/ &
1855	' ', 20(I3,',')/ &
1856	' ', 20(I3,',')/ &
1857	' ', 19(I3,','),I3,'.'/ &
1858	' Time averaged over ', F7.1, ' s,' / &
1859	' Profiles for the time averaging are taken every ', &
1860	F6.1,' s')
1861	#endif
1862	400 FORMAT (//' Physical quantities:'/ &
1863	' -------------------'/)
1864	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1865	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1866	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1867	' f* = ',F9.6,' 1/s')
1868	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1869	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1870	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1871	415 FORMAT (/' Cloud physics parameters:'/ &
1872	' ------------------------'/)
1873	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1874	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1875	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1876	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1877	' Vapourization heat : L_v = ',E8.2,' J/kg')
1878	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1879	' Height: ',A,' m'/ &
1880	' Temperature: ',A,' K'/ &
1881	' Gradient: ',A,' K/100m'/ &
1882	' Gridpoint: ',A)
1883	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1884	' Height: ',A,' m'/ &
1885	' Humidity: ',A,' kg/kg'/ &
1886	' Gradient: ',A,' (kg/kg)/100m'/ &
1887	' Gridpoint: ',A)
1888	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1889	' Height: ',A,' m'/ &
1890	' Scalar concentration: ',A,' kg/m**3'/ &
1891	' Gradient: ',A,' (kg/m**3)/100m'/ &
1892	' Gridpoint: ',A)
1893	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1894	' Height: ',A,' m'/ &
1895	' ug: ',A,' m/s'/ &
1896	' Gradient: ',A,' 1/100s'/ &
1897	' Gridpoint: ',A)
1898	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1899	' Height: ',A,' m'/ &
1900	' vg: ',A,' m/s'/ &
1901	' Gradient: ',A,' 1/100s'/ &
1902	' Gridpoint: ',A)
1903	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1904	' Height: ',A,' m'/ &
1905	' Salinity: ',A,' psu'/ &
1906	' Gradient: ',A,' psu/100m'/ &
1907	' Gridpoint: ',A)
1908	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1909	' Height: ',A,' m'/ &
1910	' w_subs: ',A,' m/s'/ &
1911	' Gradient: ',A,' (m/s)/100m'/ &
1912	' Gridpoint: ',A)
1913	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1914	' profiles')
1915	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1916	' ----------------------------------'/)
1917	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1918	'on)')
1919	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1920	' total water content is used.'/ &
1921	' Condensation is parameterized via 0% - or 100% scheme.')
1922	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1923	'icle model')
1924	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1925	' droplets < 1.0E-6 m')
1926	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1927	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1928	'are used'/ &
1929	' number of radius classes: ',I3,' interval ', &
1930	'[1.0E-6,2.0E-4] m'/ &
1931	' number of dissipation classes: ',I2,' interval ', &
1932	'[0,1000] cm2/s3')
1933	437 FORMAT (' Droplet collision is switched off')
1934	450 FORMAT (//' LES / Turbulence quantities:'/ &
1935	' ---------------------------'/)
1936	451 FORMAT (' Diffusion coefficients are constant:'/ &
1937	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1938	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1939	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1940	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1941	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1942	470 FORMAT (//' Actions during the simulation:'/ &
1943	' -----------------------------'/)
1944	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1945	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1946	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1947	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1948	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1949	' to i/j =',I4)
1950	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1951	1X,F5.3, ' m2/s2')
1952	474 FORMAT (' Random number generator used : ',A/)
1953	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1954	'respectively, if'/ &
1955	' the value is negative) by ',F5.2,' K at the beginning of the',&
1956	' 3D-simulation'/)
1957	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1958	'respectively, if the'/ &
1959	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1960	' the 3D-simulation'/)
1961	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1962	'respectively, if the'/ &
1963	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1964	' the 3D-simulation'/)
1965	480 FORMAT (' Particles:'/ &
1966	' ---------'// &
1967	' Particle advection is active (switched on at t = ', F7.1, &
1968	' s)'/ &
1969	' Start of new particle generations every ',F6.1,' s'/ &
1970	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1971	' bottom: ', A, ' top: ', A/&
1972	' Maximum particle age: ',F9.1,' s'/ &
1973	' Advection stopped at t = ',F9.1,' s'/ &
1974	' Particles are sorted every ',F9.1,' s'/)
1975	481 FORMAT (' Particles have random start positions'/)
1976	482 FORMAT (' Particles are advected only horizontally'/)
1977	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1978	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1979	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1980	' Maximum age of the end of the tail: ',F8.2,' s')
1981	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1982	486 FORMAT (' Particle statistics are written on file'/)
1983	487 FORMAT (' Number of particle groups: ',I2/)
1984	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1985	' minimum timestep for advection: ', F7.5/)
1986	489 FORMAT (' Number of particles simultaneously released at each ', &
1987	'point: ', I5/)
1988	490 FORMAT (' Particle group ',I2,':'/ &
1989	' Particle radius: ',E10.3, 'm')
1990	491 FORMAT (' Particle inertia is activated'/ &
1991	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1992	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1993	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1994	' y:',F8.1,' - ',F8.1,' m'/&
1995	' z:',F8.1,' - ',F8.1,' m'/&
1996	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1997	' m dz = ',F8.1,' m'/)
1998	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1999	F8.2,' s'/)
2000	495 FORMAT (' Number of particles in total domain: ',I10/)
2001	500 FORMAT (//' 1D-Model parameters:'/ &
2002	' -------------------'// &
2003	' Simulation time: ',F8.1,' s'/ &
2004	' Run-controll output every: ',F8.1,' s'/ &
2005	' Vertical profile output every: ',F8.1,' s'/ &
2006	' Mixing length calculation: ',A/ &
2007	' Dissipation calculation: ',A/)
2008	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2009	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2010	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2011
2012
2013	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |