Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 987

Last change on this file since 987 was 979, checked in by fricke, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 979 2012-08-09 08:50:11Z maronga $
11	!
12	! 978 2012-08-09 08:28:32Z fricke
13	! -km_damp_max, outflow_damping_width
14	! +pt_damping_factor, pt_damping_width
15	! +z0h
16	!
17	! 964 2012-07-26 09:14:24Z raasch
18	! output of profil-related quantities removed
19	!
20	! 940 2012-07-09 14:31:00Z raasch
21	! Output in case of simulations for pure neutral stratification (no pt-equation
22	! solved)
23	!
24	! 927 2012-06-06 19:15:04Z raasch
25	! output of masking_method for mg-solver
26	!
27	! 868 2012-03-28 12:21:07Z raasch
28	! translation velocity in Galilean transformation changed to 0.6 * ug
29	!
30	! 833 2012-02-22 08:55:55Z maronga
31	! Adjusted format for leaf area density
32	!
33	! 828 2012-02-21 12:00:36Z raasch
34	! output of dissipation_classes + radius_classes
35	!
36	! 825 2012-02-19 03:03:44Z raasch
37	! Output of cloud physics parameters/quantities complemented and restructured
38	!
39	! 767 2011-10-14 06:39:12Z raasch
40	! Output of given initial u,v-profiles
41	!
42	! 759 2011-09-15 13:58:31Z raasch
43	! output of maximum number of parallel io streams
44	!
45	! 707 2011-03-29 11:39:40Z raasch
46	! bc_lr/ns replaced by bc_lr/ns_cyc
47	!
48	! 667 2010-12-23 12:06:00Z suehring/gryschka
49	! Output of advection scheme.
50	! Modified output of Prandtl-layer height.
51	!
52	! 580 2010-10-05 13:59:11Z heinze
53	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
54	! ws_vertical_gradient_level to subs_vertical_gradient_level and
55	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
56	!
57	! 493 2010-03-01 08:30:24Z raasch
58	! NetCDF data output format extendend for NetCDF4/HDF5
59	!
60	! 449 2010-02-02 11:23:59Z raasch
61	! +large scale vertical motion (subsidence/ascent)
62	! Bugfix: index problem concerning gradient_level indices removed
63	!
64	! 410 2009-12-04 17:05:40Z letzel
65	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
66	! mask_scale\|_x\|y\|z, masks, skip_time_domask
67	!
68	! 346 2009-07-06 10:13:41Z raasch
69	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
70	! Coupling with independent precursor runs.
71	! Output of messages replaced by message handling routine.
72	! Output of several additional dvr parameters
73	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
74	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
75	! dp_smooth, dpdxy, u_bulk, v_bulk
76	! topography_grid_convention moved from user_header
77	! small bugfix concerning 3d 64bit netcdf output format
78	!
79	! 206 2008-10-13 14:59:11Z raasch
80	! Bugfix: error in zu index in case of section_xy = -1
81	!
82	! 198 2008-09-17 08:55:28Z raasch
83	! Format adjustments allowing output of larger revision numbers
84	!
85	! 197 2008-09-16 15:29:03Z raasch
86	! allow 100 spectra levels instead of 10 for consistency with
87	! define_netcdf_header,
88	! bugfix in the output of the characteristic levels of potential temperature,
89	! geostrophic wind, scalar concentration, humidity and leaf area density,
90	! output of turbulence recycling informations
91	!
92	! 138 2007-11-28 10:03:58Z letzel
93	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
94	! Allow two instead of one digit to specify isosurface and slicer variables.
95	! Output of sorting frequency of particles
96	!
97	! 108 2007-08-24 15:10:38Z letzel
98	! Output of informations for coupled model runs (boundary conditions etc.)
99	! + output of momentumfluxes at the top boundary
100	! Rayleigh damping for ocean, e_init
101	!
102	! 97 2007-06-21 08:23:15Z raasch
103	! Adjustments for the ocean version.
104	! use_pt_reference renamed use_reference
105	!
106	! 87 2007-05-22 15:46:47Z raasch
107	! Bugfix: output of use_upstream_for_tke
108	!
109	! 82 2007-04-16 15:40:52Z raasch
110	! Preprocessor strings for different linux clusters changed to "lc",
111	! routine local_flush is used for buffer flushing
112	!
113	! 76 2007-03-29 00:58:32Z raasch
114	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
115	! output of the loop optimization method, moisture renamed humidity,
116	! output of subversion revision number
117	!
118	! 19 2007-02-23 04:53:48Z raasch
119	! Output of scalar flux applied at top boundary
120	!
121	! RCS Log replace by Id keyword, revision history cleaned up
122	!
123	! Revision 1.63 2006/08/22 13:53:13 raasch
124	! Output of dz_max
125	!
126	! Revision 1.1 1997/08/11 06:17:20 raasch
127	! Initial revision
128	!
129	!
130	! Description:
131	! ------------
132	! Writing a header with all important informations about the actual run.
133	! This subroutine is called three times, two times at the beginning
134	! (writing information on files RUN_CONTROL and HEADER) and one time at the
135	! end of the run, then writing additional information about CPU-usage on file
136	! header.
137	!-----------------------------------------------------------------------------!
138
139	USE arrays_3d
140	USE control_parameters
141	USE cloud_parameters
142	USE cpulog
143	USE dvrp_variables
144	USE grid_variables
145	USE indices
146	USE model_1d
147	USE particle_attributes
148	USE pegrid
149	USE subsidence_mod
150	USE spectrum
151
152	IMPLICIT NONE
153
154	CHARACTER (LEN=1) :: prec
155	CHARACTER (LEN=2) :: do2d_mode
156	CHARACTER (LEN=5) :: section_chr
157	CHARACTER (LEN=9) :: time_to_string
158	CHARACTER (LEN=10) :: coor_chr, host_chr
159	CHARACTER (LEN=16) :: begin_chr
160	CHARACTER (LEN=23) :: ver_rev
161	CHARACTER (LEN=40) :: output_format
162	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
163	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
164	domask_chr, run_classification
165	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
166	temperatures, ugcomponent, vgcomponent
167	CHARACTER (LEN=85) :: roben, runten
168
169	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
170
171	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
172	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
173	REAL :: cpuseconds_per_simulated_second
174
175	!
176	!-- Open the output file. At the end of the simulation, output is directed
177	!-- to unit 19.
178	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
179	.NOT. simulated_time_at_begin /= simulated_time ) THEN
180	io = 15 ! header output on file RUN_CONTROL
181	ELSE
182	io = 19 ! header output on file HEADER
183	ENDIF
184	CALL check_open( io )
185
186	!
187	!-- At the end of the run, output file (HEADER) will be rewritten with
188	!-- new informations
189	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
190
191	!
192	!-- Determine kind of model run
193	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
194	run_classification = '3D - restart run'
195	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
196	run_classification = '3D - run with cyclic fill of 3D - prerun data'
197	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
198	run_classification = '3D - run without 1D - prerun'
199	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
200	run_classification = '3D - run with 1D - prerun'
201	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
202	run_classification = '3D - run initialized by user'
203	ELSE
204	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
205	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
206	ENDIF
207	IF ( ocean ) THEN
208	run_classification = 'ocean - ' // run_classification
209	ELSE
210	run_classification = 'atmosphere - ' // run_classification
211	ENDIF
212
213	!
214	!-- Run-identification, date, time, host
215	host_chr = host(1:10)
216	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
217	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
218	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
219	#if defined( __mpi2 )
220	mpi_type = 2
221	#else
222	mpi_type = 1
223	#endif
224	WRITE ( io, 101 ) mpi_type, coupling_mode
225	ENDIF
226	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
227	ADJUSTR( host_chr )
228	#if defined( __parallel )
229	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
230	char1 = 'calculated'
231	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
232	host(1:2) == 'lc' ) .AND. &
233	npex == -1 .AND. pdims(2) == 1 ) THEN
234	char1 = 'forced'
235	ELSE
236	char1 = 'predefined'
237	ENDIF
238	IF ( threads_per_task == 1 ) THEN
239	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
240	ELSE
241	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
242	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
243	ENDIF
244	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
245	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
246	npex == -1 .AND. pdims(2) == 1 ) &
247	THEN
248	WRITE ( io, 106 )
249	ELSEIF ( pdims(2) == 1 ) THEN
250	WRITE ( io, 107 ) 'x'
251	ELSEIF ( pdims(1) == 1 ) THEN
252	WRITE ( io, 107 ) 'y'
253	ENDIF
254	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
255	IF ( numprocs /= maximum_parallel_io_streams ) THEN
256	WRITE ( io, 108 ) maximum_parallel_io_streams
257	ENDIF
258	#endif
259	WRITE ( io, 99 )
260
261	!
262	!-- Numerical schemes
263	WRITE ( io, 110 )
264	IF ( psolver(1:7) == 'poisfft' ) THEN
265	WRITE ( io, 111 ) TRIM( fft_method )
266	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
267	ELSEIF ( psolver == 'sor' ) THEN
268	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
269	ELSEIF ( psolver == 'multigrid' ) THEN
270	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
271	IF ( mg_cycles == -1 ) THEN
272	WRITE ( io, 140 ) residual_limit
273	ELSE
274	WRITE ( io, 141 ) mg_cycles
275	ENDIF
276	IF ( mg_switch_to_pe0_level == 0 ) THEN
277	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
278	nzt_mg(1)
279	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
280	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
281	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
282	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
283	nzt_mg(mg_switch_to_pe0_level), &
284	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
285	nzt_mg(1)
286	ENDIF
287	IF ( masking_method ) WRITE ( io, 144 )
288	ENDIF
289	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
290	THEN
291	WRITE ( io, 142 )
292	ENDIF
293
294	IF ( momentum_advec == 'pw-scheme' ) THEN
295	WRITE ( io, 113 )
296	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
297	WRITE ( io, 503 )
298	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
299	WRITE ( io, 114 )
300	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
301	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
302	overshoot_limit_w /= 0.0 ) THEN
303	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
304	overshoot_limit_w
305	ENDIF
306	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
307	ups_limit_w /= 0.0 ) &
308	THEN
309	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
310	ENDIF
311	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
312	ENDIF
313	IF ( scalar_advec == 'pw-scheme' ) THEN
314	WRITE ( io, 116 )
315	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
316	WRITE ( io, 504 )
317	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
318	WRITE ( io, 117 )
319	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
320	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
321	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
322	ENDIF
323	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
324	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
325	ENDIF
326	ELSE
327	WRITE ( io, 118 )
328	ENDIF
329
330	WRITE ( io, 139 ) TRIM( loop_optimization )
331
332	IF ( galilei_transformation ) THEN
333	IF ( use_ug_for_galilei_tr ) THEN
334	char1 = '0.6 * geostrophic wind'
335	ELSE
336	char1 = 'mean wind in model domain'
337	ENDIF
338	IF ( simulated_time_at_begin == simulated_time ) THEN
339	char2 = 'at the start of the run'
340	ELSE
341	char2 = 'at the end of the run'
342	ENDIF
343	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
344	advected_distance_x/1000.0, advected_distance_y/1000.0
345	ENDIF
346	IF ( timestep_scheme == 'leapfrog' ) THEN
347	WRITE ( io, 120 )
348	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
349	WRITE ( io, 121 )
350	ELSE
351	WRITE ( io, 122 ) timestep_scheme
352	ENDIF
353	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
354	IF ( rayleigh_damping_factor /= 0.0 ) THEN
355	IF ( .NOT. ocean ) THEN
356	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
357	rayleigh_damping_factor
358	ELSE
359	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
360	rayleigh_damping_factor
361	ENDIF
362	ENDIF
363	IF ( neutral ) WRITE ( io, 131 ) pt_surface
364	IF ( humidity ) THEN
365	IF ( .NOT. cloud_physics ) THEN
366	WRITE ( io, 129 )
367	ELSE
368	WRITE ( io, 130 )
369	ENDIF
370	ENDIF
371	IF ( passive_scalar ) WRITE ( io, 134 )
372	IF ( conserve_volume_flow ) THEN
373	WRITE ( io, 150 ) conserve_volume_flow_mode
374	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
375	WRITE ( io, 151 ) u_bulk, v_bulk
376	ENDIF
377	ELSEIF ( dp_external ) THEN
378	IF ( dp_smooth ) THEN
379	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
380	ELSE
381	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
382	ENDIF
383	ENDIF
384	IF ( large_scale_subsidence ) THEN
385	WRITE ( io, 153 )
386	WRITE ( io, 154 )
387	ENDIF
388	WRITE ( io, 99 )
389
390	!
391	!-- Runtime and timestep informations
392	WRITE ( io, 200 )
393	IF ( .NOT. dt_fixed ) THEN
394	WRITE ( io, 201 ) dt_max, cfl_factor
395	ELSE
396	WRITE ( io, 202 ) dt
397	ENDIF
398	WRITE ( io, 203 ) simulated_time_at_begin, end_time
399
400	IF ( time_restart /= 9999999.9 .AND. &
401	simulated_time_at_begin == simulated_time ) THEN
402	IF ( dt_restart == 9999999.9 ) THEN
403	WRITE ( io, 204 ) ' Restart at: ',time_restart
404	ELSE
405	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
406	ENDIF
407	ENDIF
408
409	IF ( simulated_time_at_begin /= simulated_time ) THEN
410	i = MAX ( log_point_s(10)%counts, 1 )
411	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
412	cpuseconds_per_simulated_second = 0.0
413	ELSE
414	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
415	( simulated_time - &
416	simulated_time_at_begin )
417	ENDIF
418	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
419	log_point_s(10)%sum / REAL( i ), &
420	cpuseconds_per_simulated_second
421	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
422	IF ( dt_restart == 9999999.9 ) THEN
423	WRITE ( io, 204 ) ' Next restart at: ',time_restart
424	ELSE
425	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
426	ENDIF
427	ENDIF
428	ENDIF
429
430	!
431	!-- Start time for coupled runs, if independent precursor runs for atmosphere
432	!-- and ocean are used. In this case, coupling_start_time defines the time
433	!-- when the coupling is switched on.
434	IF ( coupling_start_time /= 0.0 ) THEN
435	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
436	char1 = 'Precursor run for a coupled atmosphere-ocean run'
437	ELSE
438	char1 = 'Coupled atmosphere-ocean run following independent ' // &
439	'precursor runs'
440	ENDIF
441	WRITE ( io, 207 ) char1, coupling_start_time
442	ENDIF
443
444	!
445	!-- Computational grid
446	IF ( .NOT. ocean ) THEN
447	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
448	IF ( dz_stretch_level_index < nzt+1 ) THEN
449	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
450	dz_stretch_factor, dz_max
451	ENDIF
452	ELSE
453	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
454	IF ( dz_stretch_level_index > 0 ) THEN
455	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
456	dz_stretch_factor, dz_max
457	ENDIF
458	ENDIF
459	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
460	MIN( nnz+2, nzt+2 )
461	IF ( numprocs > 1 ) THEN
462	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
463	WRITE ( io, 255 )
464	ELSE
465	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
466	ENDIF
467	ENDIF
468	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
469
470	!
471	!-- Topography
472	WRITE ( io, 270 ) topography
473	SELECT CASE ( TRIM( topography ) )
474
475	CASE ( 'flat' )
476	! no actions necessary
477
478	CASE ( 'single_building' )
479	blx = INT( building_length_x / dx )
480	bly = INT( building_length_y / dy )
481	bh = INT( building_height / dz )
482
483	IF ( building_wall_left == 9999999.9 ) THEN
484	building_wall_left = ( nx + 1 - blx ) / 2 * dx
485	ENDIF
486	bxl = INT ( building_wall_left / dx + 0.5 )
487	bxr = bxl + blx
488
489	IF ( building_wall_south == 9999999.9 ) THEN
490	building_wall_south = ( ny + 1 - bly ) / 2 * dy
491	ENDIF
492	bys = INT ( building_wall_south / dy + 0.5 )
493	byn = bys + bly
494
495	WRITE ( io, 271 ) building_length_x, building_length_y, &
496	building_height, bxl, bxr, bys, byn
497
498	CASE ( 'single_street_canyon' )
499	ch = NINT( canyon_height / dz )
500	IF ( canyon_width_x /= 9999999.9 ) THEN
501	!
502	!-- Street canyon in y direction
503	cwx = NINT( canyon_width_x / dx )
504	IF ( canyon_wall_left == 9999999.9 ) THEN
505	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
506	ENDIF
507	cxl = NINT( canyon_wall_left / dx )
508	cxr = cxl + cwx
509	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
510
511	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
512	!
513	!-- Street canyon in x direction
514	cwy = NINT( canyon_width_y / dy )
515	IF ( canyon_wall_south == 9999999.9 ) THEN
516	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
517	ENDIF
518	cys = NINT( canyon_wall_south / dy )
519	cyn = cys + cwy
520	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
521	ENDIF
522
523	END SELECT
524
525	IF ( TRIM( topography ) /= 'flat' ) THEN
526	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
527	IF ( TRIM( topography ) == 'single_building' .OR. &
528	TRIM( topography ) == 'single_street_canyon' ) THEN
529	WRITE ( io, 278 )
530	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
531	WRITE ( io, 279 )
532	ENDIF
533	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
534	WRITE ( io, 278 )
535	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
536	WRITE ( io, 279 )
537	ENDIF
538	ENDIF
539
540	IF ( plant_canopy ) THEN
541
542	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
543	IF ( passive_scalar ) THEN
544	WRITE ( io, 281 ) scalar_exchange_coefficient, &
545	leaf_surface_concentration
546	ENDIF
547
548	!
549	!-- Heat flux at the top of vegetation
550	WRITE ( io, 282 ) cthf
551
552	!
553	!-- Leaf area density profile
554	!-- Building output strings, starting with surface value
555	WRITE ( learde, '(F6.4)' ) lad_surface
556	gradients = '------'
557	slices = ' 0'
558	coordinates = ' 0.0'
559	i = 1
560	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
561
562	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
563	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
564
565	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
566	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
567
568	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
569	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
570
571	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
572	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
573
574	i = i + 1
575	ENDDO
576
577	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
578	TRIM( gradients ), TRIM( slices )
579
580	ENDIF
581
582	!
583	!-- Boundary conditions
584	IF ( ibc_p_b == 0 ) THEN
585	runten = 'p(0) = 0 \|'
586	ELSEIF ( ibc_p_b == 1 ) THEN
587	runten = 'p(0) = p(1) \|'
588	ELSE
589	runten = 'p(0) = p(1) +R\|'
590	ENDIF
591	IF ( ibc_p_t == 0 ) THEN
592	roben = 'p(nzt+1) = 0 \|'
593	ELSE
594	roben = 'p(nzt+1) = p(nzt) \|'
595	ENDIF
596
597	IF ( ibc_uv_b == 0 ) THEN
598	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
599	ELSE
600	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
601	ENDIF
602	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
603	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
604	ELSEIF ( ibc_uv_t == 0 ) THEN
605	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
606	ELSE
607	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
608	ENDIF
609
610	IF ( ibc_pt_b == 0 ) THEN
611	runten = TRIM( runten ) // ' pt(0) = pt_surface'
612	ELSEIF ( ibc_pt_b == 1 ) THEN
613	runten = TRIM( runten ) // ' pt(0) = pt(1)'
614	ELSEIF ( ibc_pt_b == 2 ) THEN
615	runten = TRIM( runten ) // ' pt(0) = from coupled model'
616	ENDIF
617	IF ( ibc_pt_t == 0 ) THEN
618	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
619	ELSEIF( ibc_pt_t == 1 ) THEN
620	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
621	ELSEIF( ibc_pt_t == 2 ) THEN
622	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
623
624	ENDIF
625
626	WRITE ( io, 300 ) runten, roben
627
628	IF ( .NOT. constant_diffusion ) THEN
629	IF ( ibc_e_b == 1 ) THEN
630	runten = 'e(0) = e(1)'
631	ELSE
632	runten = 'e(0) = e(1) = (u/0.1)*2'
633	ENDIF
634	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
635
636	WRITE ( io, 301 ) 'e', runten, roben
637
638	ENDIF
639
640	IF ( ocean ) THEN
641	runten = 'sa(0) = sa(1)'
642	IF ( ibc_sa_t == 0 ) THEN
643	roben = 'sa(nzt+1) = sa_surface'
644	ELSE
645	roben = 'sa(nzt+1) = sa(nzt)'
646	ENDIF
647	WRITE ( io, 301 ) 'sa', runten, roben
648	ENDIF
649
650	IF ( humidity ) THEN
651	IF ( ibc_q_b == 0 ) THEN
652	runten = 'q(0) = q_surface'
653	ELSE
654	runten = 'q(0) = q(1)'
655	ENDIF
656	IF ( ibc_q_t == 0 ) THEN
657	roben = 'q(nzt) = q_top'
658	ELSE
659	roben = 'q(nzt) = q(nzt-1) + dq/dz'
660	ENDIF
661	WRITE ( io, 301 ) 'q', runten, roben
662	ENDIF
663
664	IF ( passive_scalar ) THEN
665	IF ( ibc_q_b == 0 ) THEN
666	runten = 's(0) = s_surface'
667	ELSE
668	runten = 's(0) = s(1)'
669	ENDIF
670	IF ( ibc_q_t == 0 ) THEN
671	roben = 's(nzt) = s_top'
672	ELSE
673	roben = 's(nzt) = s(nzt-1) + ds/dz'
674	ENDIF
675	WRITE ( io, 301 ) 's', runten, roben
676	ENDIF
677
678	IF ( use_surface_fluxes ) THEN
679	WRITE ( io, 303 )
680	IF ( constant_heatflux ) THEN
681	WRITE ( io, 306 ) surface_heatflux
682	IF ( random_heatflux ) WRITE ( io, 307 )
683	ENDIF
684	IF ( humidity .AND. constant_waterflux ) THEN
685	WRITE ( io, 311 ) surface_waterflux
686	ENDIF
687	IF ( passive_scalar .AND. constant_waterflux ) THEN
688	WRITE ( io, 313 ) surface_waterflux
689	ENDIF
690	ENDIF
691
692	IF ( use_top_fluxes ) THEN
693	WRITE ( io, 304 )
694	IF ( coupling_mode == 'uncoupled' ) THEN
695	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
696	IF ( constant_top_heatflux ) THEN
697	WRITE ( io, 306 ) top_heatflux
698	ENDIF
699	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
700	WRITE ( io, 316 )
701	ENDIF
702	IF ( ocean .AND. constant_top_salinityflux ) THEN
703	WRITE ( io, 309 ) top_salinityflux
704	ENDIF
705	IF ( humidity .OR. passive_scalar ) THEN
706	WRITE ( io, 315 )
707	ENDIF
708	ENDIF
709
710	IF ( prandtl_layer ) THEN
711	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
712	z0h_factor*roughness_length, kappa, &
713	rif_min, rif_max
714	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
715	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
716	WRITE ( io, 312 )
717	ENDIF
718	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
719	WRITE ( io, 314 )
720	ENDIF
721	ELSE
722	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
723	WRITE ( io, 310 ) rif_min, rif_max
724	ENDIF
725	ENDIF
726
727	WRITE ( io, 317 ) bc_lr, bc_ns
728	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
729	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
730	IF ( turbulent_inflow ) THEN
731	WRITE ( io, 319 ) recycling_width, recycling_plane, &
732	inflow_damping_height, inflow_damping_width
733	ENDIF
734	ENDIF
735
736	!
737	!-- Listing of 1D-profiles
738	WRITE ( io, 325 ) dt_dopr_listing
739	IF ( averaging_interval_pr /= 0.0 ) THEN
740	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
741	ENDIF
742
743	!
744	!-- DATA output
745	WRITE ( io, 330 )
746	IF ( averaging_interval_pr /= 0.0 ) THEN
747	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
748	ENDIF
749
750	!
751	!-- 1D-profiles
752	dopr_chr = 'Profile:'
753	IF ( dopr_n /= 0 ) THEN
754	WRITE ( io, 331 )
755
756	output_format = ''
757	IF ( netcdf_output ) THEN
758	IF ( netcdf_data_format == 1 ) THEN
759	output_format = 'NetCDF classic'
760	ELSE
761	output_format = 'NetCDF 64bit offset'
762	ENDIF
763	ENDIF
764	WRITE ( io, 344 ) output_format
765
766	DO i = 1, dopr_n
767	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
768	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
769	WRITE ( io, 332 ) dopr_chr
770	dopr_chr = ' :'
771	ENDIF
772	ENDDO
773
774	IF ( dopr_chr /= '' ) THEN
775	WRITE ( io, 332 ) dopr_chr
776	ENDIF
777	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
778	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
779	ENDIF
780
781	!
782	!-- 2D-arrays
783	DO av = 0, 1
784
785	i = 1
786	do2d_xy = ''
787	do2d_xz = ''
788	do2d_yz = ''
789	DO WHILE ( do2d(av,i) /= ' ' )
790
791	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
792	do2d_mode = do2d(av,i)(l-1:l)
793
794	SELECT CASE ( do2d_mode )
795	CASE ( 'xy' )
796	ll = LEN_TRIM( do2d_xy )
797	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
798	CASE ( 'xz' )
799	ll = LEN_TRIM( do2d_xz )
800	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
801	CASE ( 'yz' )
802	ll = LEN_TRIM( do2d_yz )
803	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
804	END SELECT
805
806	i = i + 1
807
808	ENDDO
809
810	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
811	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
812	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
813	( netcdf_output .OR. iso2d_output ) ) THEN
814
815	IF ( av == 0 ) THEN
816	WRITE ( io, 334 ) ''
817	ELSE
818	WRITE ( io, 334 ) '(time-averaged)'
819	ENDIF
820
821	IF ( do2d_at_begin ) THEN
822	begin_chr = 'and at the start'
823	ELSE
824	begin_chr = ''
825	ENDIF
826
827	output_format = ''
828	IF ( netcdf_output ) THEN
829	IF ( netcdf_data_format == 1 ) THEN
830	output_format = 'NetCDF classic'
831	ELSEIF ( netcdf_data_format == 2 ) THEN
832	output_format = 'NetCDF 64bit offset'
833	ELSEIF ( netcdf_data_format == 3 ) THEN
834	output_format = 'NetCDF4/HDF5'
835	ELSEIF ( netcdf_data_format == 4 ) THEN
836	output_format = 'NetCDF4/HDF5 clasic'
837	ENDIF
838	ENDIF
839	IF ( iso2d_output ) THEN
840	IF ( netcdf_output ) THEN
841	output_format = TRIM( output_format ) // ' and iso2d'
842	ELSE
843	output_format = 'iso2d'
844	ENDIF
845	ENDIF
846	WRITE ( io, 344 ) output_format
847
848	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
849	i = 1
850	slices = '/'
851	coordinates = '/'
852	!
853	!-- Building strings with index and coordinate informations of the
854	!-- slices
855	DO WHILE ( section(i,1) /= -9999 )
856
857	WRITE (section_chr,'(I5)') section(i,1)
858	section_chr = ADJUSTL( section_chr )
859	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
860
861	IF ( section(i,1) == -1 ) THEN
862	WRITE (coor_chr,'(F10.1)') -1.0
863	ELSE
864	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
865	ENDIF
866	coor_chr = ADJUSTL( coor_chr )
867	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
868
869	i = i + 1
870	ENDDO
871	IF ( av == 0 ) THEN
872	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
873	TRIM( begin_chr ), 'k', TRIM( slices ), &
874	TRIM( coordinates )
875	IF ( skip_time_do2d_xy /= 0.0 ) THEN
876	WRITE ( io, 339 ) skip_time_do2d_xy
877	ENDIF
878	ELSE
879	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
880	TRIM( begin_chr ), averaging_interval, &
881	dt_averaging_input, 'k', TRIM( slices ), &
882	TRIM( coordinates )
883	IF ( skip_time_data_output_av /= 0.0 ) THEN
884	WRITE ( io, 339 ) skip_time_data_output_av
885	ENDIF
886	ENDIF
887
888	ENDIF
889
890	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
891	i = 1
892	slices = '/'
893	coordinates = '/'
894	!
895	!-- Building strings with index and coordinate informations of the
896	!-- slices
897	DO WHILE ( section(i,2) /= -9999 )
898
899	WRITE (section_chr,'(I5)') section(i,2)
900	section_chr = ADJUSTL( section_chr )
901	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
902
903	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
904	coor_chr = ADJUSTL( coor_chr )
905	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
906
907	i = i + 1
908	ENDDO
909	IF ( av == 0 ) THEN
910	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
911	TRIM( begin_chr ), 'j', TRIM( slices ), &
912	TRIM( coordinates )
913	IF ( skip_time_do2d_xz /= 0.0 ) THEN
914	WRITE ( io, 339 ) skip_time_do2d_xz
915	ENDIF
916	ELSE
917	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
918	TRIM( begin_chr ), averaging_interval, &
919	dt_averaging_input, 'j', TRIM( slices ), &
920	TRIM( coordinates )
921	IF ( skip_time_data_output_av /= 0.0 ) THEN
922	WRITE ( io, 339 ) skip_time_data_output_av
923	ENDIF
924	ENDIF
925	ENDIF
926
927	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
928	i = 1
929	slices = '/'
930	coordinates = '/'
931	!
932	!-- Building strings with index and coordinate informations of the
933	!-- slices
934	DO WHILE ( section(i,3) /= -9999 )
935
936	WRITE (section_chr,'(I5)') section(i,3)
937	section_chr = ADJUSTL( section_chr )
938	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
939
940	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
941	coor_chr = ADJUSTL( coor_chr )
942	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
943
944	i = i + 1
945	ENDDO
946	IF ( av == 0 ) THEN
947	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
948	TRIM( begin_chr ), 'i', TRIM( slices ), &
949	TRIM( coordinates )
950	IF ( skip_time_do2d_yz /= 0.0 ) THEN
951	WRITE ( io, 339 ) skip_time_do2d_yz
952	ENDIF
953	ELSE
954	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
955	TRIM( begin_chr ), averaging_interval, &
956	dt_averaging_input, 'i', TRIM( slices ), &
957	TRIM( coordinates )
958	IF ( skip_time_data_output_av /= 0.0 ) THEN
959	WRITE ( io, 339 ) skip_time_data_output_av
960	ENDIF
961	ENDIF
962	ENDIF
963
964	ENDIF
965
966	ENDDO
967
968	!
969	!-- 3d-arrays
970	DO av = 0, 1
971
972	i = 1
973	do3d_chr = ''
974	DO WHILE ( do3d(av,i) /= ' ' )
975
976	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
977	i = i + 1
978
979	ENDDO
980
981	IF ( do3d_chr /= '' ) THEN
982	IF ( av == 0 ) THEN
983	WRITE ( io, 336 ) ''
984	ELSE
985	WRITE ( io, 336 ) '(time-averaged)'
986	ENDIF
987
988	output_format = ''
989	IF ( netcdf_output ) THEN
990	IF ( netcdf_data_format == 1 ) THEN
991	output_format = 'NetCDF classic'
992	ELSEIF ( netcdf_data_format == 2 ) THEN
993	output_format = 'NetCDF 64bit offset'
994	ELSEIF ( netcdf_data_format == 3 ) THEN
995	output_format = 'NetCDF4/HDF5'
996	ELSEIF ( netcdf_data_format == 4 ) THEN
997	output_format = 'NetCDF4/HDF5 clasic'
998	ENDIF
999	ENDIF
1000	IF ( avs_output ) THEN
1001	IF ( netcdf_output ) THEN
1002	output_format = TRIM( output_format ) // ' and avs'
1003	ELSE
1004	output_format = 'avs'
1005	ENDIF
1006	ENDIF
1007	WRITE ( io, 344 ) output_format
1008
1009	IF ( do3d_at_begin ) THEN
1010	begin_chr = 'and at the start'
1011	ELSE
1012	begin_chr = ''
1013	ENDIF
1014	IF ( av == 0 ) THEN
1015	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1016	zu(nz_do3d), nz_do3d
1017	ELSE
1018	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1019	TRIM( begin_chr ), averaging_interval, &
1020	dt_averaging_input, zu(nz_do3d), nz_do3d
1021	ENDIF
1022
1023	IF ( do3d_compress ) THEN
1024	do3d_chr = ''
1025	i = 1
1026	DO WHILE ( do3d(av,i) /= ' ' )
1027
1028	SELECT CASE ( do3d(av,i) )
1029	CASE ( 'u' )
1030	j = 1
1031	CASE ( 'v' )
1032	j = 2
1033	CASE ( 'w' )
1034	j = 3
1035	CASE ( 'p' )
1036	j = 4
1037	CASE ( 'pt' )
1038	j = 5
1039	END SELECT
1040	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1041	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1042	':' // prec // ','
1043	i = i + 1
1044
1045	ENDDO
1046	WRITE ( io, 338 ) do3d_chr
1047
1048	ENDIF
1049
1050	IF ( av == 0 ) THEN
1051	IF ( skip_time_do3d /= 0.0 ) THEN
1052	WRITE ( io, 339 ) skip_time_do3d
1053	ENDIF
1054	ELSE
1055	IF ( skip_time_data_output_av /= 0.0 ) THEN
1056	WRITE ( io, 339 ) skip_time_data_output_av
1057	ENDIF
1058	ENDIF
1059
1060	ENDIF
1061
1062	ENDDO
1063
1064	!
1065	!-- masked arrays
1066	IF ( masks > 0 ) WRITE ( io, 345 ) &
1067	mask_scale_x, mask_scale_y, mask_scale_z
1068	DO mid = 1, masks
1069	DO av = 0, 1
1070
1071	i = 1
1072	domask_chr = ''
1073	DO WHILE ( domask(mid,av,i) /= ' ' )
1074	domask_chr = TRIM( domask_chr ) // ' ' // &
1075	TRIM( domask(mid,av,i) ) // ','
1076	i = i + 1
1077	ENDDO
1078
1079	IF ( domask_chr /= '' ) THEN
1080	IF ( av == 0 ) THEN
1081	WRITE ( io, 346 ) '', mid
1082	ELSE
1083	WRITE ( io, 346 ) ' (time-averaged)', mid
1084	ENDIF
1085
1086	output_format = ''
1087	IF ( netcdf_output ) THEN
1088	IF ( netcdf_data_format == 1 ) THEN
1089	output_format = 'NetCDF classic'
1090	ELSEIF ( netcdf_data_format == 2 ) THEN
1091	output_format = 'NetCDF 64bit offset'
1092	ELSEIF ( netcdf_data_format == 3 ) THEN
1093	output_format = 'NetCDF4/HDF5'
1094	ELSEIF ( netcdf_data_format == 4 ) THEN
1095	output_format = 'NetCDF4/HDF5 clasic'
1096	ENDIF
1097	ENDIF
1098	WRITE ( io, 344 ) output_format
1099
1100	IF ( av == 0 ) THEN
1101	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1102	ELSE
1103	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1104	averaging_interval, dt_averaging_input
1105	ENDIF
1106
1107	IF ( av == 0 ) THEN
1108	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1109	WRITE ( io, 339 ) skip_time_domask(mid)
1110	ENDIF
1111	ELSE
1112	IF ( skip_time_data_output_av /= 0.0 ) THEN
1113	WRITE ( io, 339 ) skip_time_data_output_av
1114	ENDIF
1115	ENDIF
1116	!
1117	!-- output locations
1118	DO dim = 1, 3
1119	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1120	count = 0
1121	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1122	count = count + 1
1123	ENDDO
1124	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1125	mask(mid,dim,:count)
1126	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1127	mask_loop(mid,dim,2) < 0.0 .AND. &
1128	mask_loop(mid,dim,3) == 0.0 ) THEN
1129	WRITE ( io, 350 ) dir(dim), dir(dim)
1130	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1131	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1132	mask_loop(mid,dim,1:2)
1133	ELSE
1134	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1135	mask_loop(mid,dim,1:3)
1136	ENDIF
1137	ENDDO
1138	ENDIF
1139
1140	ENDDO
1141	ENDDO
1142
1143	!
1144	!-- Timeseries
1145	IF ( dt_dots /= 9999999.9 ) THEN
1146	WRITE ( io, 340 )
1147
1148	output_format = ''
1149	IF ( netcdf_output ) THEN
1150	IF ( netcdf_data_format == 1 ) THEN
1151	output_format = 'NetCDF classic'
1152	ELSE
1153	output_format = 'NetCDF 64bit offset'
1154	ENDIF
1155	ENDIF
1156	WRITE ( io, 344 ) output_format
1157	WRITE ( io, 341 ) dt_dots
1158	ENDIF
1159
1160	#if defined( __dvrp_graphics )
1161	!
1162	!-- Dvrp-output
1163	IF ( dt_dvrp /= 9999999.9 ) THEN
1164	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1165	TRIM( dvrp_username ), TRIM( dvrp_directory )
1166	i = 1
1167	l = 0
1168	m = 0
1169	DO WHILE ( mode_dvrp(i) /= ' ' )
1170	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1171	READ ( mode_dvrp(i), '(10X,I2)' ) j
1172	l = l + 1
1173	IF ( do3d(0,j) /= ' ' ) THEN
1174	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1175	isosurface_color(:,l)
1176	ENDIF
1177	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1178	READ ( mode_dvrp(i), '(6X,I2)' ) j
1179	m = m + 1
1180	IF ( do2d(0,j) /= ' ' ) THEN
1181	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1182	slicer_range_limits_dvrp(:,m)
1183	ENDIF
1184	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1185	WRITE ( io, 363 ) dvrp_psize
1186	IF ( particle_dvrpsize /= 'none' ) THEN
1187	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1188	dvrpsize_interval
1189	ENDIF
1190	IF ( particle_color /= 'none' ) THEN
1191	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1192	color_interval
1193	ENDIF
1194	ENDIF
1195	i = i + 1
1196	ENDDO
1197
1198	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1199	superelevation_y, superelevation, clip_dvrp_l, &
1200	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1201
1202	IF ( TRIM( topography ) /= 'flat' ) THEN
1203	WRITE ( io, 366 ) topography_color
1204	IF ( cluster_size > 1 ) THEN
1205	WRITE ( io, 367 ) cluster_size
1206	ENDIF
1207	ENDIF
1208
1209	ENDIF
1210	#endif
1211
1212	#if defined( __spectra )
1213	!
1214	!-- Spectra output
1215	IF ( dt_dosp /= 9999999.9 ) THEN
1216	WRITE ( io, 370 )
1217
1218	output_format = ''
1219	IF ( netcdf_output ) THEN
1220	IF ( netcdf_data_format == 1 ) THEN
1221	output_format = 'NetCDF classic'
1222	ELSE
1223	output_format = 'NetCDF 64bit offset'
1224	ENDIF
1225	ENDIF
1226	WRITE ( io, 344 ) output_format
1227	WRITE ( io, 371 ) dt_dosp
1228	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1229	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1230	( spectra_direction(i), i = 1,10 ), &
1231	( comp_spectra_level(i), i = 1,100 ), &
1232	( plot_spectra_level(i), i = 1,100 ), &
1233	averaging_interval_sp, dt_averaging_input_pr
1234	ENDIF
1235	#endif
1236
1237	WRITE ( io, 99 )
1238
1239	!
1240	!-- Physical quantities
1241	WRITE ( io, 400 )
1242
1243	!
1244	!-- Geostrophic parameters
1245	WRITE ( io, 410 ) omega, phi, f, fs
1246
1247	!
1248	!-- Other quantities
1249	WRITE ( io, 411 ) g
1250	IF ( use_reference ) THEN
1251	IF ( ocean ) THEN
1252	WRITE ( io, 412 ) prho_reference
1253	ELSE
1254	WRITE ( io, 413 ) pt_reference
1255	ENDIF
1256	ENDIF
1257
1258	!
1259	!-- Cloud physics parameters
1260	IF ( cloud_physics ) THEN
1261	WRITE ( io, 415 )
1262	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1263	ENDIF
1264
1265	!-- Profile of the geostrophic wind (component ug)
1266	!-- Building output strings
1267	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1268	gradients = '------'
1269	slices = ' 0'
1270	coordinates = ' 0.0'
1271	i = 1
1272	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1273
1274	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1275	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1276
1277	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1279
1280	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1282
1283	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1285
1286	IF ( i == 10 ) THEN
1287	EXIT
1288	ELSE
1289	i = i + 1
1290	ENDIF
1291
1292	ENDDO
1293
1294	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1295	TRIM( gradients ), TRIM( slices )
1296
1297	!-- Profile of the geostrophic wind (component vg)
1298	!-- Building output strings
1299	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1300	gradients = '------'
1301	slices = ' 0'
1302	coordinates = ' 0.0'
1303	i = 1
1304	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1305
1306	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1307	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1308
1309	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1310	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1311
1312	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1313	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1314
1315	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1316	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1317
1318	IF ( i == 10 ) THEN
1319	EXIT
1320	ELSE
1321	i = i + 1
1322	ENDIF
1323
1324	ENDDO
1325
1326	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1327	TRIM( gradients ), TRIM( slices )
1328
1329	!
1330	!-- Initial wind profiles
1331	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1332
1333	!
1334	!-- Initial temperature profile
1335	!-- Building output strings, starting with surface temperature
1336	WRITE ( temperatures, '(F6.2)' ) pt_surface
1337	gradients = '------'
1338	slices = ' 0'
1339	coordinates = ' 0.0'
1340	i = 1
1341	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1342
1343	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1344	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1345
1346	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1347	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1348
1349	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1350	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1351
1352	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1353	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1354
1355	IF ( i == 10 ) THEN
1356	EXIT
1357	ELSE
1358	i = i + 1
1359	ENDIF
1360
1361	ENDDO
1362
1363	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1364	TRIM( gradients ), TRIM( slices )
1365
1366	!
1367	!-- Initial humidity profile
1368	!-- Building output strings, starting with surface humidity
1369	IF ( humidity .OR. passive_scalar ) THEN
1370	WRITE ( temperatures, '(E8.1)' ) q_surface
1371	gradients = '--------'
1372	slices = ' 0'
1373	coordinates = ' 0.0'
1374	i = 1
1375	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1376
1377	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1378	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1379
1380	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1381	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1382
1383	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1384	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1385
1386	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1387	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1388
1389	IF ( i == 10 ) THEN
1390	EXIT
1391	ELSE
1392	i = i + 1
1393	ENDIF
1394
1395	ENDDO
1396
1397	IF ( humidity ) THEN
1398	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1399	TRIM( gradients ), TRIM( slices )
1400	ELSE
1401	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1402	TRIM( gradients ), TRIM( slices )
1403	ENDIF
1404	ENDIF
1405
1406	!
1407	!-- Initial salinity profile
1408	!-- Building output strings, starting with surface salinity
1409	IF ( ocean ) THEN
1410	WRITE ( temperatures, '(F6.2)' ) sa_surface
1411	gradients = '------'
1412	slices = ' 0'
1413	coordinates = ' 0.0'
1414	i = 1
1415	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1416
1417	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1418	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1419
1420	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1421	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1422
1423	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1424	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1425
1426	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1427	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1428
1429	IF ( i == 10 ) THEN
1430	EXIT
1431	ELSE
1432	i = i + 1
1433	ENDIF
1434
1435	ENDDO
1436
1437	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1438	TRIM( gradients ), TRIM( slices )
1439	ENDIF
1440
1441	!
1442	!-- Profile for the large scale vertial velocity
1443	!-- Building output strings, starting with surface value
1444	IF ( large_scale_subsidence ) THEN
1445	temperatures = ' 0.0'
1446	gradients = '------'
1447	slices = ' 0'
1448	coordinates = ' 0.0'
1449	i = 1
1450	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1451
1452	WRITE (coor_chr,'(E10.2,7X)') &
1453	w_subs(subs_vertical_gradient_level_i(i))
1454	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1455
1456	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1457	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1458
1459	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1460	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1461
1462	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1463	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1464
1465	IF ( i == 10 ) THEN
1466	EXIT
1467	ELSE
1468	i = i + 1
1469	ENDIF
1470
1471	ENDDO
1472
1473	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1474	TRIM( gradients ), TRIM( slices )
1475	ENDIF
1476
1477	!
1478	!-- Cloud physcis parameters / quantities / numerical methods
1479	WRITE ( io, 430 )
1480	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1481	WRITE ( io, 431 )
1482	ELSEIF ( humidity .AND. cloud_physics ) THEN
1483	WRITE ( io, 432 )
1484	IF ( radiation ) WRITE ( io, 132 )
1485	IF ( precipitation ) WRITE ( io, 133 )
1486	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1487	WRITE ( io, 433 )
1488	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1489	IF ( collision_kernel /= 'none' ) THEN
1490	WRITE ( io, 435 ) TRIM( collision_kernel )
1491	IF ( collision_kernel(6:9) == 'fast' ) THEN
1492	WRITE ( io, 436 ) radius_classes, dissipation_classes
1493	ENDIF
1494	ELSE
1495	WRITE ( io, 437 )
1496	ENDIF
1497	ENDIF
1498
1499	!
1500	!-- LES / turbulence parameters
1501	WRITE ( io, 450 )
1502
1503	!--
1504	! ... LES-constants used must still be added here
1505	!--
1506	IF ( constant_diffusion ) THEN
1507	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1508	prandtl_number
1509	ENDIF
1510	IF ( .NOT. constant_diffusion) THEN
1511	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1512	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1513	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1514	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1515	ENDIF
1516
1517	!
1518	!-- Special actions during the run
1519	WRITE ( io, 470 )
1520	IF ( create_disturbances ) THEN
1521	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1522	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1523	zu(disturbance_level_ind_t), disturbance_level_ind_t
1524	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1525	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1526	ELSE
1527	WRITE ( io, 473 ) disturbance_energy_limit
1528	ENDIF
1529	WRITE ( io, 474 ) TRIM( random_generator )
1530	ENDIF
1531	IF ( pt_surface_initial_change /= 0.0 ) THEN
1532	WRITE ( io, 475 ) pt_surface_initial_change
1533	ENDIF
1534	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1535	WRITE ( io, 476 ) q_surface_initial_change
1536	ENDIF
1537	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1538	WRITE ( io, 477 ) q_surface_initial_change
1539	ENDIF
1540
1541	IF ( particle_advection ) THEN
1542	!
1543	!-- Particle attributes
1544	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1545	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1546	end_time_prel, dt_sort_particles
1547	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1548	IF ( random_start_position ) WRITE ( io, 481 )
1549	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1550	WRITE ( io, 495 ) total_number_of_particles
1551	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1552	WRITE ( io, 483 ) maximum_number_of_tailpoints
1553	IF ( minimum_tailpoint_distance /= 0 ) THEN
1554	WRITE ( io, 484 ) total_number_of_tails, &
1555	minimum_tailpoint_distance, &
1556	maximum_tailpoint_age
1557	ENDIF
1558	ENDIF
1559	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1560	WRITE ( io, 485 ) dt_write_particle_data
1561	output_format = ''
1562	IF ( netcdf_output ) THEN
1563	IF ( netcdf_data_format > 1 ) THEN
1564	output_format = 'netcdf (64 bit offset) and binary'
1565	ELSE
1566	output_format = 'netcdf and binary'
1567	ENDIF
1568	ELSE
1569	output_format = 'binary'
1570	ENDIF
1571	WRITE ( io, 344 ) output_format
1572	ENDIF
1573	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1574	IF ( write_particle_statistics ) WRITE ( io, 486 )
1575
1576	WRITE ( io, 487 ) number_of_particle_groups
1577
1578	DO i = 1, number_of_particle_groups
1579	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1580	WRITE ( io, 490 ) i, 0.0
1581	WRITE ( io, 492 )
1582	ELSE
1583	WRITE ( io, 490 ) i, radius(i)
1584	IF ( density_ratio(i) /= 0.0 ) THEN
1585	WRITE ( io, 491 ) density_ratio(i)
1586	ELSE
1587	WRITE ( io, 492 )
1588	ENDIF
1589	ENDIF
1590	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1591	pdx(i), pdy(i), pdz(i)
1592	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1593	ENDDO
1594
1595	ENDIF
1596
1597
1598	!
1599	!-- Parameters of 1D-model
1600	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1601	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1602	mixing_length_1d, dissipation_1d
1603	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1604	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1605	ENDIF
1606	ENDIF
1607
1608	!
1609	!-- User-defined informations
1610	CALL user_header( io )
1611
1612	WRITE ( io, 99 )
1613
1614	!
1615	!-- Write buffer contents to disc immediately
1616	CALL local_flush( io )
1617
1618	!
1619	!-- Here the FORMATs start
1620
1621	99 FORMAT (1X,78('-'))
1622	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1623	1X,'* ',A,' *',9X,A/ &
1624	1X,'***************************',9X,42('-'))
1625	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1626	37X,42('-'))
1627	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1628	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1629	' Run on host: ',A10)
1630	#if defined( __parallel )
1631	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1632	')',1X,A)
1633	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1634	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1635	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1636	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1637	37X,'because the job is running on an SMP-cluster')
1638	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1639	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1640	#endif
1641	110 FORMAT (/' Numerical Schemes:'/ &
1642	' -----------------'/)
1643	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1644	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1645	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1646	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1647	' or Upstream')
1648	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1649	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1650	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1651	' or Upstream')
1652	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1653	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1654	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1655	' Translation velocity = ',A/ &
1656	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1657	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1658	' of timestep changes)')
1659	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1660	' timestep changes')
1661	122 FORMAT (' --> Time differencing scheme: ',A)
1662	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1663	' maximum damping coefficient: ',F5.3, ' 1/s')
1664	124 FORMAT (' Spline-overshoots are being suppressed')
1665	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1666	' of'/ &
1667	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1668	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1669	' of'/ &
1670	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1671	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1672	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1673	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1674	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1675	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1676	130 FORMAT (' --> Additional prognostic equation for the total water content')
1677	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1678	F6.2, ' K assumed')
1679	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1680	' effective emissivity scheme')
1681	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1682	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1683	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1684	A,'-cycle)'/ &
1685	' number of grid levels: ',I2/ &
1686	' Gauss-Seidel red/black iterations: ',I2)
1687	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1688	I3,')')
1689	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1690	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1691	I3,')'/ &
1692	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1693	I3,')')
1694	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1695	139 FORMAT (' --> Loop optimization method: ',A)
1696	140 FORMAT (' maximum residual allowed: ',E10.3)
1697	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1698	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1699	'step')
1700	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1701	'kinetic energy')
1702	144 FORMAT (' masking method is used')
1703	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1704	'conserved'/ &
1705	' using the ',A,' mode')
1706	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1707	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1708	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1709	/' starting from dp_level_b =', F8.3, 'm', A /)
1710	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1711	'prognostic equation for')
1712	154 FORMAT (' the potential temperature')
1713	200 FORMAT (//' Run time and time step information:'/ &
1714	' ----------------------------------'/)
1715	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1716	' CFL-factor: ',F4.2)
1717	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1718	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1719	' End time: ',F9.3,' s')
1720	204 FORMAT ( A,F9.3,' s')
1721	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1722	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1723	' CPU-time used: ',F9.3,' s per timestep: ', &
1724	' ',F9.3,' s'/ &
1725	' per second of simulated tim', &
1726	'e: ',F9.3,' s')
1727	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1728	250 FORMAT (//' Computational grid and domain size:'/ &
1729	' ----------------------------------'// &
1730	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1731	' m dz = ',F7.3,' m'/ &
1732	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1733	' m z(u) = ',F10.3,' m'/)
1734	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1735	' factor: ',F5.3/ &
1736	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1737	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1738	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1739	255 FORMAT (' Subdomains have equal size')
1740	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1741	'have smaller sizes'/ &
1742	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1743	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1744	' degrees')
1745	270 FORMAT (//' Topography informations:'/ &
1746	' -----------------------'// &
1747	1X,'Topography: ',A)
1748	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1749	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1750	' / ',I4)
1751	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1752	' direction' / &
1753	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1754	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1755	278 FORMAT (' Topography grid definition convention:'/ &
1756	' cell edge (staggered grid points'/ &
1757	' (u in x-direction, v in y-direction))' /)
1758	279 FORMAT (' Topography grid definition convention:'/ &
1759	' cell center (scalar grid points)' /)
1760	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1761	' ------------------------------'// &
1762	' Canopy mode: ', A / &
1763	' Canopy top: ',I4 / &
1764	' Leaf drag coefficient: ',F6.2 /)
1765	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1766	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1767	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1768	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1769	' Height: ',A,' m'/ &
1770	' Leaf area density: ',A,' m2/m3'/ &
1771	' Gradient: ',A,' m2/m4'/ &
1772	' Gridpoint: ',A)
1773
1774	300 FORMAT (//' Boundary conditions:'/ &
1775	' -------------------'// &
1776	' p uv ', &
1777	' pt'// &
1778	' B. bound.: ',A/ &
1779	' T. bound.: ',A)
1780	301 FORMAT (/' ',A// &
1781	' B. bound.: ',A/ &
1782	' T. bound.: ',A)
1783	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1784	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1785	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1786	'computational u,v-level:'// &
1787	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1788	' m kappa = ',F4.2/ &
1789	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1790	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1791	307 FORMAT (' Heatflux has a random normal distribution')
1792	308 FORMAT (' Predefined surface temperature')
1793	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1794	310 FORMAT (//' 1D-Model:'// &
1795	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1796	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1797	312 FORMAT (' Predefined surface humidity')
1798	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1799	314 FORMAT (' Predefined scalar value at the surface')
1800	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1801	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1802	'atmosphere model')
1803	317 FORMAT (//' Lateral boundaries:'/ &
1804	' left/right: ',A/ &
1805	' north/south: ',A)
1806	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1807	'damping factor = ',F6.4)
1808	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1809	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1810	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1811	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1812	' v: ',F9.6,' m2/s2')
1813	325 FORMAT (//' List output:'/ &
1814	' -----------'// &
1815	' 1D-Profiles:'/ &
1816	' Output every ',F8.2,' s')
1817	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1818	' Averaging input every ',F8.2,' s')
1819	330 FORMAT (//' Data output:'/ &
1820	' -----------'/)
1821	331 FORMAT (/' 1D-Profiles:')
1822	332 FORMAT (/' ',A)
1823	333 FORMAT (' Output every ',F8.2,' s',/ &
1824	' Time averaged over ',F8.2,' s'/ &
1825	' Averaging input every ',F8.2,' s')
1826	334 FORMAT (/' 2D-Arrays',A,':')
1827	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1828	' Output every ',F8.2,' s ',A/ &
1829	' Cross sections at ',A1,' = ',A/ &
1830	' scalar-coordinates: ',A,' m'/)
1831	336 FORMAT (/' 3D-Arrays',A,':')
1832	337 FORMAT (/' Arrays: ',A/ &
1833	' Output every ',F8.2,' s ',A/ &
1834	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1835	338 FORMAT (' Compressed data output'/ &
1836	' Decimal precision: ',A/)
1837	339 FORMAT (' No output during initial ',F8.2,' s')
1838	340 FORMAT (/' Time series:')
1839	341 FORMAT (' Output every ',F8.2,' s'/)
1840	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1841	' Output every ',F8.2,' s ',A/ &
1842	' Time averaged over ',F8.2,' s'/ &
1843	' Averaging input every ',F8.2,' s'/ &
1844	' Cross sections at ',A1,' = ',A/ &
1845	' scalar-coordinates: ',A,' m'/)
1846	343 FORMAT (/' Arrays: ',A/ &
1847	' Output every ',F8.2,' s ',A/ &
1848	' Time averaged over ',F8.2,' s'/ &
1849	' Averaging input every ',F8.2,' s'/ &
1850	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1851	344 FORMAT (' Output format: ',A/)
1852	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1853	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1854	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1855	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1856	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1857	347 FORMAT (' Variables: ',A/ &
1858	' Output every ',F8.2,' s')
1859	348 FORMAT (' Variables: ',A/ &
1860	' Output every ',F8.2,' s'/ &
1861	' Time averaged over ',F8.2,' s'/ &
1862	' Averaging input every ',F8.2,' s')
1863	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1864	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1865	13(' ',8(F8.2,',')/) )
1866	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1867	'all gridpoints along ',A,'-direction (default).' )
1868	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1869	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1870	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1871	#if defined( __dvrp_graphics )
1872	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1873	' Output every ',F7.1,' s'/ &
1874	' Output mode: ',A/ &
1875	' Host / User: ',A,' / ',A/ &
1876	' Directory: ',A// &
1877	' The sequence contains:')
1878	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1879	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1880	362 FORMAT (/' Slicer plane ',A/ &
1881	' Slicer limits: [',F6.2,',',F6.2,']')
1882	363 FORMAT (/' Particles'/ &
1883	' particle size: ',F7.2,' m')
1884	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1885	F6.2,',',F6.2,']')
1886	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1887	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1888	')'/ &
1889	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1890	' from y = ',F9.1,' m to y = ',F9.1,' m')
1891	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1892	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1893	#endif
1894	#if defined( __spectra )
1895	370 FORMAT (' Spectra:')
1896	371 FORMAT (' Output every ',F7.1,' s'/)
1897	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1898	' Directions: ', 10(A5,',')/ &
1899	' height levels k = ', 20(I3,',')/ &
1900	' ', 20(I3,',')/ &
1901	' ', 20(I3,',')/ &
1902	' ', 20(I3,',')/ &
1903	' ', 19(I3,','),I3,'.'/ &
1904	' height levels selected for standard plot:'/ &
1905	' k = ', 20(I3,',')/ &
1906	' ', 20(I3,',')/ &
1907	' ', 20(I3,',')/ &
1908	' ', 20(I3,',')/ &
1909	' ', 19(I3,','),I3,'.'/ &
1910	' Time averaged over ', F7.1, ' s,' / &
1911	' Profiles for the time averaging are taken every ', &
1912	F6.1,' s')
1913	#endif
1914	400 FORMAT (//' Physical quantities:'/ &
1915	' -------------------'/)
1916	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1917	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1918	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1919	' f* = ',F9.6,' 1/s')
1920	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1921	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1922	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1923	415 FORMAT (/' Cloud physics parameters:'/ &
1924	' ------------------------'/)
1925	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1926	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1927	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1928	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1929	' Vapourization heat : L_v = ',E8.2,' J/kg')
1930	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1931	' Height: ',A,' m'/ &
1932	' Temperature: ',A,' K'/ &
1933	' Gradient: ',A,' K/100m'/ &
1934	' Gridpoint: ',A)
1935	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1936	' Height: ',A,' m'/ &
1937	' Humidity: ',A,' kg/kg'/ &
1938	' Gradient: ',A,' (kg/kg)/100m'/ &
1939	' Gridpoint: ',A)
1940	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1941	' Height: ',A,' m'/ &
1942	' Scalar concentration: ',A,' kg/m**3'/ &
1943	' Gradient: ',A,' (kg/m**3)/100m'/ &
1944	' Gridpoint: ',A)
1945	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1946	' Height: ',A,' m'/ &
1947	' ug: ',A,' m/s'/ &
1948	' Gradient: ',A,' 1/100s'/ &
1949	' Gridpoint: ',A)
1950	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1951	' Height: ',A,' m'/ &
1952	' vg: ',A,' m/s'/ &
1953	' Gradient: ',A,' 1/100s'/ &
1954	' Gridpoint: ',A)
1955	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1956	' Height: ',A,' m'/ &
1957	' Salinity: ',A,' psu'/ &
1958	' Gradient: ',A,' psu/100m'/ &
1959	' Gridpoint: ',A)
1960	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1961	' Height: ',A,' m'/ &
1962	' w_subs: ',A,' m/s'/ &
1963	' Gradient: ',A,' (m/s)/100m'/ &
1964	' Gridpoint: ',A)
1965	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1966	' profiles')
1967	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1968	' ----------------------------------'/)
1969	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1970	'on)')
1971	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1972	' total water content is used.'/ &
1973	' Condensation is parameterized via 0% - or 100% scheme.')
1974	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1975	'icle model')
1976	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1977	' droplets < 1.0E-6 m')
1978	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1979	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1980	'are used'/ &
1981	' number of radius classes: ',I3,' interval ', &
1982	'[1.0E-6,2.0E-4] m'/ &
1983	' number of dissipation classes: ',I2,' interval ', &
1984	'[0,1000] cm2/s3')
1985	437 FORMAT (' Droplet collision is switched off')
1986	450 FORMAT (//' LES / Turbulence quantities:'/ &
1987	' ---------------------------'/)
1988	451 FORMAT (' Diffusion coefficients are constant:'/ &
1989	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1990	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1991	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1992	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1993	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1994	470 FORMAT (//' Actions during the simulation:'/ &
1995	' -----------------------------'/)
1996	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1997	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1998	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1999	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
2000	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2001	' to i/j =',I4)
2002	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2003	1X,F5.3, ' m2/s2')
2004	474 FORMAT (' Random number generator used : ',A/)
2005	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2006	'respectively, if'/ &
2007	' the value is negative) by ',F5.2,' K at the beginning of the',&
2008	' 3D-simulation'/)
2009	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2010	'respectively, if the'/ &
2011	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2012	' the 3D-simulation'/)
2013	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2014	'respectively, if the'/ &
2015	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2016	' the 3D-simulation'/)
2017	480 FORMAT (' Particles:'/ &
2018	' ---------'// &
2019	' Particle advection is active (switched on at t = ', F7.1, &
2020	' s)'/ &
2021	' Start of new particle generations every ',F6.1,' s'/ &
2022	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2023	' bottom: ', A, ' top: ', A/&
2024	' Maximum particle age: ',F9.1,' s'/ &
2025	' Advection stopped at t = ',F9.1,' s'/ &
2026	' Particles are sorted every ',F9.1,' s'/)
2027	481 FORMAT (' Particles have random start positions'/)
2028	482 FORMAT (' Particles are advected only horizontally'/)
2029	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2030	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2031	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2032	' Maximum age of the end of the tail: ',F8.2,' s')
2033	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2034	486 FORMAT (' Particle statistics are written on file'/)
2035	487 FORMAT (' Number of particle groups: ',I2/)
2036	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2037	' minimum timestep for advection: ', F7.5/)
2038	489 FORMAT (' Number of particles simultaneously released at each ', &
2039	'point: ', I5/)
2040	490 FORMAT (' Particle group ',I2,':'/ &
2041	' Particle radius: ',E10.3, 'm')
2042	491 FORMAT (' Particle inertia is activated'/ &
2043	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2044	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2045	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2046	' y:',F8.1,' - ',F8.1,' m'/&
2047	' z:',F8.1,' - ',F8.1,' m'/&
2048	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2049	' m dz = ',F8.1,' m'/)
2050	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2051	F8.2,' s'/)
2052	495 FORMAT (' Number of particles in total domain: ',I10/)
2053	500 FORMAT (//' 1D-Model parameters:'/ &
2054	' -------------------'// &
2055	' Simulation time: ',F8.1,' s'/ &
2056	' Run-controll output every: ',F8.1,' s'/ &
2057	' Vertical profile output every: ',F8.1,' s'/ &
2058	' Mixing length calculation: ',A/ &
2059	' Dissipation calculation: ',A/)
2060	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2061	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2062	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2063
2064
2065	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |