Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 974

Last change on this file since 974 was 965, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.6 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 965 2012-07-26 09:29:52Z maronga $
11	!
12	! 964 2012-07-26 09:14:24Z raasch
13	! output of profil-related quantities removed
14	!
15	! 940 2012-07-09 14:31:00Z raasch
16	! Output in case of simulations for pure neutral stratification (no pt-equation
17	! solved)
18	!
19	! 927 2012-06-06 19:15:04Z raasch
20	! output of masking_method for mg-solver
21	!
22	! 868 2012-03-28 12:21:07Z raasch
23	! translation velocity in Galilean transformation changed to 0.6 * ug
24	!
25	! 833 2012-02-22 08:55:55Z maronga
26	! Adjusted format for leaf area density
27	!
28	! 828 2012-02-21 12:00:36Z raasch
29	! output of dissipation_classes + radius_classes
30	!
31	! 825 2012-02-19 03:03:44Z raasch
32	! Output of cloud physics parameters/quantities complemented and restructured
33	!
34	! 767 2011-10-14 06:39:12Z raasch
35	! Output of given initial u,v-profiles
36	!
37	! 759 2011-09-15 13:58:31Z raasch
38	! output of maximum number of parallel io streams
39	!
40	! 707 2011-03-29 11:39:40Z raasch
41	! bc_lr/ns replaced by bc_lr/ns_cyc
42	!
43	! 667 2010-12-23 12:06:00Z suehring/gryschka
44	! Output of advection scheme.
45	! Modified output of Prandtl-layer height.
46	!
47	! 580 2010-10-05 13:59:11Z heinze
48	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
49	! ws_vertical_gradient_level to subs_vertical_gradient_level and
50	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
51	!
52	! 493 2010-03-01 08:30:24Z raasch
53	! NetCDF data output format extendend for NetCDF4/HDF5
54	!
55	! 449 2010-02-02 11:23:59Z raasch
56	! +large scale vertical motion (subsidence/ascent)
57	! Bugfix: index problem concerning gradient_level indices removed
58	!
59	! 410 2009-12-04 17:05:40Z letzel
60	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
61	! mask_scale\|_x\|y\|z, masks, skip_time_domask
62	!
63	! 346 2009-07-06 10:13:41Z raasch
64	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
65	! Coupling with independent precursor runs.
66	! Output of messages replaced by message handling routine.
67	! Output of several additional dvr parameters
68	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
69	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
70	! dp_smooth, dpdxy, u_bulk, v_bulk
71	! topography_grid_convention moved from user_header
72	! small bugfix concerning 3d 64bit netcdf output format
73	!
74	! 206 2008-10-13 14:59:11Z raasch
75	! Bugfix: error in zu index in case of section_xy = -1
76	!
77	! 198 2008-09-17 08:55:28Z raasch
78	! Format adjustments allowing output of larger revision numbers
79	!
80	! 197 2008-09-16 15:29:03Z raasch
81	! allow 100 spectra levels instead of 10 for consistency with
82	! define_netcdf_header,
83	! bugfix in the output of the characteristic levels of potential temperature,
84	! geostrophic wind, scalar concentration, humidity and leaf area density,
85	! output of turbulence recycling informations
86	!
87	! 138 2007-11-28 10:03:58Z letzel
88	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
89	! Allow two instead of one digit to specify isosurface and slicer variables.
90	! Output of sorting frequency of particles
91	!
92	! 108 2007-08-24 15:10:38Z letzel
93	! Output of informations for coupled model runs (boundary conditions etc.)
94	! + output of momentumfluxes at the top boundary
95	! Rayleigh damping for ocean, e_init
96	!
97	! 97 2007-06-21 08:23:15Z raasch
98	! Adjustments for the ocean version.
99	! use_pt_reference renamed use_reference
100	!
101	! 87 2007-05-22 15:46:47Z raasch
102	! Bugfix: output of use_upstream_for_tke
103	!
104	! 82 2007-04-16 15:40:52Z raasch
105	! Preprocessor strings for different linux clusters changed to "lc",
106	! routine local_flush is used for buffer flushing
107	!
108	! 76 2007-03-29 00:58:32Z raasch
109	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
110	! output of the loop optimization method, moisture renamed humidity,
111	! output of subversion revision number
112	!
113	! 19 2007-02-23 04:53:48Z raasch
114	! Output of scalar flux applied at top boundary
115	!
116	! RCS Log replace by Id keyword, revision history cleaned up
117	!
118	! Revision 1.63 2006/08/22 13:53:13 raasch
119	! Output of dz_max
120	!
121	! Revision 1.1 1997/08/11 06:17:20 raasch
122	! Initial revision
123	!
124	!
125	! Description:
126	! ------------
127	! Writing a header with all important informations about the actual run.
128	! This subroutine is called three times, two times at the beginning
129	! (writing information on files RUN_CONTROL and HEADER) and one time at the
130	! end of the run, then writing additional information about CPU-usage on file
131	! header.
132	!-----------------------------------------------------------------------------!
133
134	USE arrays_3d
135	USE control_parameters
136	USE cloud_parameters
137	USE cpulog
138	USE dvrp_variables
139	USE grid_variables
140	USE indices
141	USE model_1d
142	USE particle_attributes
143	USE pegrid
144	USE subsidence_mod
145	USE spectrum
146
147	IMPLICIT NONE
148
149	CHARACTER (LEN=1) :: prec
150	CHARACTER (LEN=2) :: do2d_mode
151	CHARACTER (LEN=5) :: section_chr
152	CHARACTER (LEN=9) :: time_to_string
153	CHARACTER (LEN=10) :: coor_chr, host_chr
154	CHARACTER (LEN=16) :: begin_chr
155	CHARACTER (LEN=23) :: ver_rev
156	CHARACTER (LEN=40) :: output_format
157	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
158	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
159	domask_chr, run_classification
160	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
161	temperatures, ugcomponent, vgcomponent
162	CHARACTER (LEN=85) :: roben, runten
163
164	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
165
166	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
167	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
168	REAL :: cpuseconds_per_simulated_second
169
170	!
171	!-- Open the output file. At the end of the simulation, output is directed
172	!-- to unit 19.
173	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
174	.NOT. simulated_time_at_begin /= simulated_time ) THEN
175	io = 15 ! header output on file RUN_CONTROL
176	ELSE
177	io = 19 ! header output on file HEADER
178	ENDIF
179	CALL check_open( io )
180
181	!
182	!-- At the end of the run, output file (HEADER) will be rewritten with
183	!-- new informations
184	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
185
186	!
187	!-- Determine kind of model run
188	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
189	run_classification = '3D - restart run'
190	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
191	run_classification = '3D - run with cyclic fill of 3D - prerun data'
192	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
193	run_classification = '3D - run without 1D - prerun'
194	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
195	run_classification = '3D - run with 1D - prerun'
196	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
197	run_classification = '3D - run initialized by user'
198	ELSE
199	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
200	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
201	ENDIF
202	IF ( ocean ) THEN
203	run_classification = 'ocean - ' // run_classification
204	ELSE
205	run_classification = 'atmosphere - ' // run_classification
206	ENDIF
207
208	!
209	!-- Run-identification, date, time, host
210	host_chr = host(1:10)
211	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
212	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
213	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
214	#if defined( __mpi2 )
215	mpi_type = 2
216	#else
217	mpi_type = 1
218	#endif
219	WRITE ( io, 101 ) mpi_type, coupling_mode
220	ENDIF
221	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
222	ADJUSTR( host_chr )
223	#if defined( __parallel )
224	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
225	char1 = 'calculated'
226	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
227	host(1:2) == 'lc' ) .AND. &
228	npex == -1 .AND. pdims(2) == 1 ) THEN
229	char1 = 'forced'
230	ELSE
231	char1 = 'predefined'
232	ENDIF
233	IF ( threads_per_task == 1 ) THEN
234	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
235	ELSE
236	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
237	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
238	ENDIF
239	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
240	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
241	npex == -1 .AND. pdims(2) == 1 ) &
242	THEN
243	WRITE ( io, 106 )
244	ELSEIF ( pdims(2) == 1 ) THEN
245	WRITE ( io, 107 ) 'x'
246	ELSEIF ( pdims(1) == 1 ) THEN
247	WRITE ( io, 107 ) 'y'
248	ENDIF
249	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
250	IF ( numprocs /= maximum_parallel_io_streams ) THEN
251	WRITE ( io, 108 ) maximum_parallel_io_streams
252	ENDIF
253	#endif
254	WRITE ( io, 99 )
255
256	!
257	!-- Numerical schemes
258	WRITE ( io, 110 )
259	IF ( psolver(1:7) == 'poisfft' ) THEN
260	WRITE ( io, 111 ) TRIM( fft_method )
261	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
262	ELSEIF ( psolver == 'sor' ) THEN
263	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
264	ELSEIF ( psolver == 'multigrid' ) THEN
265	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
266	IF ( mg_cycles == -1 ) THEN
267	WRITE ( io, 140 ) residual_limit
268	ELSE
269	WRITE ( io, 141 ) mg_cycles
270	ENDIF
271	IF ( mg_switch_to_pe0_level == 0 ) THEN
272	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
273	nzt_mg(1)
274	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
275	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
276	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
277	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
278	nzt_mg(mg_switch_to_pe0_level), &
279	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
280	nzt_mg(1)
281	ENDIF
282	IF ( masking_method ) WRITE ( io, 144 )
283	ENDIF
284	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
285	THEN
286	WRITE ( io, 142 )
287	ENDIF
288
289	IF ( momentum_advec == 'pw-scheme' ) THEN
290	WRITE ( io, 113 )
291	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
292	WRITE ( io, 503 )
293	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
294	WRITE ( io, 114 )
295	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
296	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
297	overshoot_limit_w /= 0.0 ) THEN
298	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
299	overshoot_limit_w
300	ENDIF
301	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
302	ups_limit_w /= 0.0 ) &
303	THEN
304	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
305	ENDIF
306	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
307	ENDIF
308	IF ( scalar_advec == 'pw-scheme' ) THEN
309	WRITE ( io, 116 )
310	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
311	WRITE ( io, 504 )
312	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
313	WRITE ( io, 117 )
314	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
315	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
316	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
317	ENDIF
318	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
319	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
320	ENDIF
321	ELSE
322	WRITE ( io, 118 )
323	ENDIF
324
325	WRITE ( io, 139 ) TRIM( loop_optimization )
326
327	IF ( galilei_transformation ) THEN
328	IF ( use_ug_for_galilei_tr ) THEN
329	char1 = '0.6 * geostrophic wind'
330	ELSE
331	char1 = 'mean wind in model domain'
332	ENDIF
333	IF ( simulated_time_at_begin == simulated_time ) THEN
334	char2 = 'at the start of the run'
335	ELSE
336	char2 = 'at the end of the run'
337	ENDIF
338	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
339	advected_distance_x/1000.0, advected_distance_y/1000.0
340	ENDIF
341	IF ( timestep_scheme == 'leapfrog' ) THEN
342	WRITE ( io, 120 )
343	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
344	WRITE ( io, 121 )
345	ELSE
346	WRITE ( io, 122 ) timestep_scheme
347	ENDIF
348	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
349	IF ( rayleigh_damping_factor /= 0.0 ) THEN
350	IF ( .NOT. ocean ) THEN
351	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
352	rayleigh_damping_factor
353	ELSE
354	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
355	rayleigh_damping_factor
356	ENDIF
357	ENDIF
358	IF ( neutral ) WRITE ( io, 131 ) pt_surface
359	IF ( humidity ) THEN
360	IF ( .NOT. cloud_physics ) THEN
361	WRITE ( io, 129 )
362	ELSE
363	WRITE ( io, 130 )
364	ENDIF
365	ENDIF
366	IF ( passive_scalar ) WRITE ( io, 134 )
367	IF ( conserve_volume_flow ) THEN
368	WRITE ( io, 150 ) conserve_volume_flow_mode
369	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
370	WRITE ( io, 151 ) u_bulk, v_bulk
371	ENDIF
372	ELSEIF ( dp_external ) THEN
373	IF ( dp_smooth ) THEN
374	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
375	ELSE
376	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
377	ENDIF
378	ENDIF
379	IF ( large_scale_subsidence ) THEN
380	WRITE ( io, 153 )
381	WRITE ( io, 154 )
382	ENDIF
383	WRITE ( io, 99 )
384
385	!
386	!-- Runtime and timestep informations
387	WRITE ( io, 200 )
388	IF ( .NOT. dt_fixed ) THEN
389	WRITE ( io, 201 ) dt_max, cfl_factor
390	ELSE
391	WRITE ( io, 202 ) dt
392	ENDIF
393	WRITE ( io, 203 ) simulated_time_at_begin, end_time
394
395	IF ( time_restart /= 9999999.9 .AND. &
396	simulated_time_at_begin == simulated_time ) THEN
397	IF ( dt_restart == 9999999.9 ) THEN
398	WRITE ( io, 204 ) ' Restart at: ',time_restart
399	ELSE
400	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
401	ENDIF
402	ENDIF
403
404	IF ( simulated_time_at_begin /= simulated_time ) THEN
405	i = MAX ( log_point_s(10)%counts, 1 )
406	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
407	cpuseconds_per_simulated_second = 0.0
408	ELSE
409	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
410	( simulated_time - &
411	simulated_time_at_begin )
412	ENDIF
413	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
414	log_point_s(10)%sum / REAL( i ), &
415	cpuseconds_per_simulated_second
416	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
417	IF ( dt_restart == 9999999.9 ) THEN
418	WRITE ( io, 204 ) ' Next restart at: ',time_restart
419	ELSE
420	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
421	ENDIF
422	ENDIF
423	ENDIF
424
425	!
426	!-- Start time for coupled runs, if independent precursor runs for atmosphere
427	!-- and ocean are used. In this case, coupling_start_time defines the time
428	!-- when the coupling is switched on.
429	IF ( coupling_start_time /= 0.0 ) THEN
430	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
431	char1 = 'Precursor run for a coupled atmosphere-ocean run'
432	ELSE
433	char1 = 'Coupled atmosphere-ocean run following independent ' // &
434	'precursor runs'
435	ENDIF
436	WRITE ( io, 207 ) char1, coupling_start_time
437	ENDIF
438
439	!
440	!-- Computational grid
441	IF ( .NOT. ocean ) THEN
442	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
443	IF ( dz_stretch_level_index < nzt+1 ) THEN
444	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
445	dz_stretch_factor, dz_max
446	ENDIF
447	ELSE
448	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
449	IF ( dz_stretch_level_index > 0 ) THEN
450	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
451	dz_stretch_factor, dz_max
452	ENDIF
453	ENDIF
454	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
455	MIN( nnz+2, nzt+2 )
456	IF ( numprocs > 1 ) THEN
457	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
458	WRITE ( io, 255 )
459	ELSE
460	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
461	ENDIF
462	ENDIF
463	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
464
465	!
466	!-- Topography
467	WRITE ( io, 270 ) topography
468	SELECT CASE ( TRIM( topography ) )
469
470	CASE ( 'flat' )
471	! no actions necessary
472
473	CASE ( 'single_building' )
474	blx = INT( building_length_x / dx )
475	bly = INT( building_length_y / dy )
476	bh = INT( building_height / dz )
477
478	IF ( building_wall_left == 9999999.9 ) THEN
479	building_wall_left = ( nx + 1 - blx ) / 2 * dx
480	ENDIF
481	bxl = INT ( building_wall_left / dx + 0.5 )
482	bxr = bxl + blx
483
484	IF ( building_wall_south == 9999999.9 ) THEN
485	building_wall_south = ( ny + 1 - bly ) / 2 * dy
486	ENDIF
487	bys = INT ( building_wall_south / dy + 0.5 )
488	byn = bys + bly
489
490	WRITE ( io, 271 ) building_length_x, building_length_y, &
491	building_height, bxl, bxr, bys, byn
492
493	CASE ( 'single_street_canyon' )
494	ch = NINT( canyon_height / dz )
495	IF ( canyon_width_x /= 9999999.9 ) THEN
496	!
497	!-- Street canyon in y direction
498	cwx = NINT( canyon_width_x / dx )
499	IF ( canyon_wall_left == 9999999.9 ) THEN
500	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
501	ENDIF
502	cxl = NINT( canyon_wall_left / dx )
503	cxr = cxl + cwx
504	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
505
506	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
507	!
508	!-- Street canyon in x direction
509	cwy = NINT( canyon_width_y / dy )
510	IF ( canyon_wall_south == 9999999.9 ) THEN
511	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
512	ENDIF
513	cys = NINT( canyon_wall_south / dy )
514	cyn = cys + cwy
515	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
516	ENDIF
517
518	END SELECT
519
520	IF ( TRIM( topography ) /= 'flat' ) THEN
521	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
522	IF ( TRIM( topography ) == 'single_building' .OR. &
523	TRIM( topography ) == 'single_street_canyon' ) THEN
524	WRITE ( io, 278 )
525	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
526	WRITE ( io, 279 )
527	ENDIF
528	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
529	WRITE ( io, 278 )
530	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
531	WRITE ( io, 279 )
532	ENDIF
533	ENDIF
534
535	IF ( plant_canopy ) THEN
536
537	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
538	IF ( passive_scalar ) THEN
539	WRITE ( io, 281 ) scalar_exchange_coefficient, &
540	leaf_surface_concentration
541	ENDIF
542
543	!
544	!-- Heat flux at the top of vegetation
545	WRITE ( io, 282 ) cthf
546
547	!
548	!-- Leaf area density profile
549	!-- Building output strings, starting with surface value
550	WRITE ( learde, '(F6.4)' ) lad_surface
551	gradients = '------'
552	slices = ' 0'
553	coordinates = ' 0.0'
554	i = 1
555	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
556
557	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
558	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
559
560	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
561	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
562
563	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
564	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
565
566	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
567	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
568
569	i = i + 1
570	ENDDO
571
572	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
573	TRIM( gradients ), TRIM( slices )
574
575	ENDIF
576
577	!
578	!-- Boundary conditions
579	IF ( ibc_p_b == 0 ) THEN
580	runten = 'p(0) = 0 \|'
581	ELSEIF ( ibc_p_b == 1 ) THEN
582	runten = 'p(0) = p(1) \|'
583	ELSE
584	runten = 'p(0) = p(1) +R\|'
585	ENDIF
586	IF ( ibc_p_t == 0 ) THEN
587	roben = 'p(nzt+1) = 0 \|'
588	ELSE
589	roben = 'p(nzt+1) = p(nzt) \|'
590	ENDIF
591
592	IF ( ibc_uv_b == 0 ) THEN
593	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
594	ELSE
595	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
596	ENDIF
597	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
598	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
599	ELSEIF ( ibc_uv_t == 0 ) THEN
600	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
601	ELSE
602	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
603	ENDIF
604
605	IF ( ibc_pt_b == 0 ) THEN
606	runten = TRIM( runten ) // ' pt(0) = pt_surface'
607	ELSEIF ( ibc_pt_b == 1 ) THEN
608	runten = TRIM( runten ) // ' pt(0) = pt(1)'
609	ELSEIF ( ibc_pt_b == 2 ) THEN
610	runten = TRIM( runten ) // ' pt(0) = from coupled model'
611	ENDIF
612	IF ( ibc_pt_t == 0 ) THEN
613	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
614	ELSEIF( ibc_pt_t == 1 ) THEN
615	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
616	ELSEIF( ibc_pt_t == 2 ) THEN
617	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
618
619	ENDIF
620
621	WRITE ( io, 300 ) runten, roben
622
623	IF ( .NOT. constant_diffusion ) THEN
624	IF ( ibc_e_b == 1 ) THEN
625	runten = 'e(0) = e(1)'
626	ELSE
627	runten = 'e(0) = e(1) = (u/0.1)*2'
628	ENDIF
629	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
630
631	WRITE ( io, 301 ) 'e', runten, roben
632
633	ENDIF
634
635	IF ( ocean ) THEN
636	runten = 'sa(0) = sa(1)'
637	IF ( ibc_sa_t == 0 ) THEN
638	roben = 'sa(nzt+1) = sa_surface'
639	ELSE
640	roben = 'sa(nzt+1) = sa(nzt)'
641	ENDIF
642	WRITE ( io, 301 ) 'sa', runten, roben
643	ENDIF
644
645	IF ( humidity ) THEN
646	IF ( ibc_q_b == 0 ) THEN
647	runten = 'q(0) = q_surface'
648	ELSE
649	runten = 'q(0) = q(1)'
650	ENDIF
651	IF ( ibc_q_t == 0 ) THEN
652	roben = 'q(nzt) = q_top'
653	ELSE
654	roben = 'q(nzt) = q(nzt-1) + dq/dz'
655	ENDIF
656	WRITE ( io, 301 ) 'q', runten, roben
657	ENDIF
658
659	IF ( passive_scalar ) THEN
660	IF ( ibc_q_b == 0 ) THEN
661	runten = 's(0) = s_surface'
662	ELSE
663	runten = 's(0) = s(1)'
664	ENDIF
665	IF ( ibc_q_t == 0 ) THEN
666	roben = 's(nzt) = s_top'
667	ELSE
668	roben = 's(nzt) = s(nzt-1) + ds/dz'
669	ENDIF
670	WRITE ( io, 301 ) 's', runten, roben
671	ENDIF
672
673	IF ( use_surface_fluxes ) THEN
674	WRITE ( io, 303 )
675	IF ( constant_heatflux ) THEN
676	WRITE ( io, 306 ) surface_heatflux
677	IF ( random_heatflux ) WRITE ( io, 307 )
678	ENDIF
679	IF ( humidity .AND. constant_waterflux ) THEN
680	WRITE ( io, 311 ) surface_waterflux
681	ENDIF
682	IF ( passive_scalar .AND. constant_waterflux ) THEN
683	WRITE ( io, 313 ) surface_waterflux
684	ENDIF
685	ENDIF
686
687	IF ( use_top_fluxes ) THEN
688	WRITE ( io, 304 )
689	IF ( coupling_mode == 'uncoupled' ) THEN
690	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
691	IF ( constant_top_heatflux ) THEN
692	WRITE ( io, 306 ) top_heatflux
693	ENDIF
694	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
695	WRITE ( io, 316 )
696	ENDIF
697	IF ( ocean .AND. constant_top_salinityflux ) THEN
698	WRITE ( io, 309 ) top_salinityflux
699	ENDIF
700	IF ( humidity .OR. passive_scalar ) THEN
701	WRITE ( io, 315 )
702	ENDIF
703	ENDIF
704
705	IF ( prandtl_layer ) THEN
706	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
707	rif_min, rif_max
708	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
709	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
710	WRITE ( io, 312 )
711	ENDIF
712	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
713	WRITE ( io, 314 )
714	ENDIF
715	ELSE
716	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
717	WRITE ( io, 310 ) rif_min, rif_max
718	ENDIF
719	ENDIF
720
721	WRITE ( io, 317 ) bc_lr, bc_ns
722	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
723	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
724	IF ( turbulent_inflow ) THEN
725	WRITE ( io, 319 ) recycling_width, recycling_plane, &
726	inflow_damping_height, inflow_damping_width
727	ENDIF
728	ENDIF
729
730	!
731	!-- Listing of 1D-profiles
732	WRITE ( io, 325 ) dt_dopr_listing
733	IF ( averaging_interval_pr /= 0.0 ) THEN
734	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
735	ENDIF
736
737	!
738	!-- DATA output
739	WRITE ( io, 330 )
740	IF ( averaging_interval_pr /= 0.0 ) THEN
741	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
742	ENDIF
743
744	!
745	!-- 1D-profiles
746	dopr_chr = 'Profile:'
747	IF ( dopr_n /= 0 ) THEN
748	WRITE ( io, 331 )
749
750	output_format = ''
751	IF ( netcdf_output ) THEN
752	IF ( netcdf_data_format == 1 ) THEN
753	output_format = 'NetCDF classic'
754	ELSE
755	output_format = 'NetCDF 64bit offset'
756	ENDIF
757	ENDIF
758	WRITE ( io, 344 ) output_format
759
760	DO i = 1, dopr_n
761	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
762	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
763	WRITE ( io, 332 ) dopr_chr
764	dopr_chr = ' :'
765	ENDIF
766	ENDDO
767
768	IF ( dopr_chr /= '' ) THEN
769	WRITE ( io, 332 ) dopr_chr
770	ENDIF
771	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
772	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
773	ENDIF
774
775	!
776	!-- 2D-arrays
777	DO av = 0, 1
778
779	i = 1
780	do2d_xy = ''
781	do2d_xz = ''
782	do2d_yz = ''
783	DO WHILE ( do2d(av,i) /= ' ' )
784
785	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
786	do2d_mode = do2d(av,i)(l-1:l)
787
788	SELECT CASE ( do2d_mode )
789	CASE ( 'xy' )
790	ll = LEN_TRIM( do2d_xy )
791	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
792	CASE ( 'xz' )
793	ll = LEN_TRIM( do2d_xz )
794	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
795	CASE ( 'yz' )
796	ll = LEN_TRIM( do2d_yz )
797	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
798	END SELECT
799
800	i = i + 1
801
802	ENDDO
803
804	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
805	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
806	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
807	( netcdf_output .OR. iso2d_output ) ) THEN
808
809	IF ( av == 0 ) THEN
810	WRITE ( io, 334 ) ''
811	ELSE
812	WRITE ( io, 334 ) '(time-averaged)'
813	ENDIF
814
815	IF ( do2d_at_begin ) THEN
816	begin_chr = 'and at the start'
817	ELSE
818	begin_chr = ''
819	ENDIF
820
821	output_format = ''
822	IF ( netcdf_output ) THEN
823	IF ( netcdf_data_format == 1 ) THEN
824	output_format = 'NetCDF classic'
825	ELSEIF ( netcdf_data_format == 2 ) THEN
826	output_format = 'NetCDF 64bit offset'
827	ELSEIF ( netcdf_data_format == 3 ) THEN
828	output_format = 'NetCDF4/HDF5'
829	ELSEIF ( netcdf_data_format == 4 ) THEN
830	output_format = 'NetCDF4/HDF5 clasic'
831	ENDIF
832	ENDIF
833	IF ( iso2d_output ) THEN
834	IF ( netcdf_output ) THEN
835	output_format = TRIM( output_format ) // ' and iso2d'
836	ELSE
837	output_format = 'iso2d'
838	ENDIF
839	ENDIF
840	WRITE ( io, 344 ) output_format
841
842	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
843	i = 1
844	slices = '/'
845	coordinates = '/'
846	!
847	!-- Building strings with index and coordinate informations of the
848	!-- slices
849	DO WHILE ( section(i,1) /= -9999 )
850
851	WRITE (section_chr,'(I5)') section(i,1)
852	section_chr = ADJUSTL( section_chr )
853	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
854
855	IF ( section(i,1) == -1 ) THEN
856	WRITE (coor_chr,'(F10.1)') -1.0
857	ELSE
858	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
859	ENDIF
860	coor_chr = ADJUSTL( coor_chr )
861	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
862
863	i = i + 1
864	ENDDO
865	IF ( av == 0 ) THEN
866	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
867	TRIM( begin_chr ), 'k', TRIM( slices ), &
868	TRIM( coordinates )
869	IF ( skip_time_do2d_xy /= 0.0 ) THEN
870	WRITE ( io, 339 ) skip_time_do2d_xy
871	ENDIF
872	ELSE
873	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
874	TRIM( begin_chr ), averaging_interval, &
875	dt_averaging_input, 'k', TRIM( slices ), &
876	TRIM( coordinates )
877	IF ( skip_time_data_output_av /= 0.0 ) THEN
878	WRITE ( io, 339 ) skip_time_data_output_av
879	ENDIF
880	ENDIF
881
882	ENDIF
883
884	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
885	i = 1
886	slices = '/'
887	coordinates = '/'
888	!
889	!-- Building strings with index and coordinate informations of the
890	!-- slices
891	DO WHILE ( section(i,2) /= -9999 )
892
893	WRITE (section_chr,'(I5)') section(i,2)
894	section_chr = ADJUSTL( section_chr )
895	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
896
897	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
898	coor_chr = ADJUSTL( coor_chr )
899	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
900
901	i = i + 1
902	ENDDO
903	IF ( av == 0 ) THEN
904	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
905	TRIM( begin_chr ), 'j', TRIM( slices ), &
906	TRIM( coordinates )
907	IF ( skip_time_do2d_xz /= 0.0 ) THEN
908	WRITE ( io, 339 ) skip_time_do2d_xz
909	ENDIF
910	ELSE
911	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
912	TRIM( begin_chr ), averaging_interval, &
913	dt_averaging_input, 'j', TRIM( slices ), &
914	TRIM( coordinates )
915	IF ( skip_time_data_output_av /= 0.0 ) THEN
916	WRITE ( io, 339 ) skip_time_data_output_av
917	ENDIF
918	ENDIF
919	ENDIF
920
921	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
922	i = 1
923	slices = '/'
924	coordinates = '/'
925	!
926	!-- Building strings with index and coordinate informations of the
927	!-- slices
928	DO WHILE ( section(i,3) /= -9999 )
929
930	WRITE (section_chr,'(I5)') section(i,3)
931	section_chr = ADJUSTL( section_chr )
932	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
933
934	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
935	coor_chr = ADJUSTL( coor_chr )
936	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
937
938	i = i + 1
939	ENDDO
940	IF ( av == 0 ) THEN
941	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
942	TRIM( begin_chr ), 'i', TRIM( slices ), &
943	TRIM( coordinates )
944	IF ( skip_time_do2d_yz /= 0.0 ) THEN
945	WRITE ( io, 339 ) skip_time_do2d_yz
946	ENDIF
947	ELSE
948	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
949	TRIM( begin_chr ), averaging_interval, &
950	dt_averaging_input, 'i', TRIM( slices ), &
951	TRIM( coordinates )
952	IF ( skip_time_data_output_av /= 0.0 ) THEN
953	WRITE ( io, 339 ) skip_time_data_output_av
954	ENDIF
955	ENDIF
956	ENDIF
957
958	ENDIF
959
960	ENDDO
961
962	!
963	!-- 3d-arrays
964	DO av = 0, 1
965
966	i = 1
967	do3d_chr = ''
968	DO WHILE ( do3d(av,i) /= ' ' )
969
970	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
971	i = i + 1
972
973	ENDDO
974
975	IF ( do3d_chr /= '' ) THEN
976	IF ( av == 0 ) THEN
977	WRITE ( io, 336 ) ''
978	ELSE
979	WRITE ( io, 336 ) '(time-averaged)'
980	ENDIF
981
982	output_format = ''
983	IF ( netcdf_output ) THEN
984	IF ( netcdf_data_format == 1 ) THEN
985	output_format = 'NetCDF classic'
986	ELSEIF ( netcdf_data_format == 2 ) THEN
987	output_format = 'NetCDF 64bit offset'
988	ELSEIF ( netcdf_data_format == 3 ) THEN
989	output_format = 'NetCDF4/HDF5'
990	ELSEIF ( netcdf_data_format == 4 ) THEN
991	output_format = 'NetCDF4/HDF5 clasic'
992	ENDIF
993	ENDIF
994	IF ( avs_output ) THEN
995	IF ( netcdf_output ) THEN
996	output_format = TRIM( output_format ) // ' and avs'
997	ELSE
998	output_format = 'avs'
999	ENDIF
1000	ENDIF
1001	WRITE ( io, 344 ) output_format
1002
1003	IF ( do3d_at_begin ) THEN
1004	begin_chr = 'and at the start'
1005	ELSE
1006	begin_chr = ''
1007	ENDIF
1008	IF ( av == 0 ) THEN
1009	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1010	zu(nz_do3d), nz_do3d
1011	ELSE
1012	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1013	TRIM( begin_chr ), averaging_interval, &
1014	dt_averaging_input, zu(nz_do3d), nz_do3d
1015	ENDIF
1016
1017	IF ( do3d_compress ) THEN
1018	do3d_chr = ''
1019	i = 1
1020	DO WHILE ( do3d(av,i) /= ' ' )
1021
1022	SELECT CASE ( do3d(av,i) )
1023	CASE ( 'u' )
1024	j = 1
1025	CASE ( 'v' )
1026	j = 2
1027	CASE ( 'w' )
1028	j = 3
1029	CASE ( 'p' )
1030	j = 4
1031	CASE ( 'pt' )
1032	j = 5
1033	END SELECT
1034	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1035	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1036	':' // prec // ','
1037	i = i + 1
1038
1039	ENDDO
1040	WRITE ( io, 338 ) do3d_chr
1041
1042	ENDIF
1043
1044	IF ( av == 0 ) THEN
1045	IF ( skip_time_do3d /= 0.0 ) THEN
1046	WRITE ( io, 339 ) skip_time_do3d
1047	ENDIF
1048	ELSE
1049	IF ( skip_time_data_output_av /= 0.0 ) THEN
1050	WRITE ( io, 339 ) skip_time_data_output_av
1051	ENDIF
1052	ENDIF
1053
1054	ENDIF
1055
1056	ENDDO
1057
1058	!
1059	!-- masked arrays
1060	IF ( masks > 0 ) WRITE ( io, 345 ) &
1061	mask_scale_x, mask_scale_y, mask_scale_z
1062	DO mid = 1, masks
1063	DO av = 0, 1
1064
1065	i = 1
1066	domask_chr = ''
1067	DO WHILE ( domask(mid,av,i) /= ' ' )
1068	domask_chr = TRIM( domask_chr ) // ' ' // &
1069	TRIM( domask(mid,av,i) ) // ','
1070	i = i + 1
1071	ENDDO
1072
1073	IF ( domask_chr /= '' ) THEN
1074	IF ( av == 0 ) THEN
1075	WRITE ( io, 346 ) '', mid
1076	ELSE
1077	WRITE ( io, 346 ) ' (time-averaged)', mid
1078	ENDIF
1079
1080	output_format = ''
1081	IF ( netcdf_output ) THEN
1082	IF ( netcdf_data_format == 1 ) THEN
1083	output_format = 'NetCDF classic'
1084	ELSEIF ( netcdf_data_format == 2 ) THEN
1085	output_format = 'NetCDF 64bit offset'
1086	ELSEIF ( netcdf_data_format == 3 ) THEN
1087	output_format = 'NetCDF4/HDF5'
1088	ELSEIF ( netcdf_data_format == 4 ) THEN
1089	output_format = 'NetCDF4/HDF5 clasic'
1090	ENDIF
1091	ENDIF
1092	WRITE ( io, 344 ) output_format
1093
1094	IF ( av == 0 ) THEN
1095	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1096	ELSE
1097	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1098	averaging_interval, dt_averaging_input
1099	ENDIF
1100
1101	IF ( av == 0 ) THEN
1102	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1103	WRITE ( io, 339 ) skip_time_domask(mid)
1104	ENDIF
1105	ELSE
1106	IF ( skip_time_data_output_av /= 0.0 ) THEN
1107	WRITE ( io, 339 ) skip_time_data_output_av
1108	ENDIF
1109	ENDIF
1110	!
1111	!-- output locations
1112	DO dim = 1, 3
1113	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1114	count = 0
1115	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1116	count = count + 1
1117	ENDDO
1118	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1119	mask(mid,dim,:count)
1120	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1121	mask_loop(mid,dim,2) < 0.0 .AND. &
1122	mask_loop(mid,dim,3) == 0.0 ) THEN
1123	WRITE ( io, 350 ) dir(dim), dir(dim)
1124	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1125	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1126	mask_loop(mid,dim,1:2)
1127	ELSE
1128	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1129	mask_loop(mid,dim,1:3)
1130	ENDIF
1131	ENDDO
1132	ENDIF
1133
1134	ENDDO
1135	ENDDO
1136
1137	!
1138	!-- Timeseries
1139	IF ( dt_dots /= 9999999.9 ) THEN
1140	WRITE ( io, 340 )
1141
1142	output_format = ''
1143	IF ( netcdf_output ) THEN
1144	IF ( netcdf_data_format == 1 ) THEN
1145	output_format = 'NetCDF classic'
1146	ELSE
1147	output_format = 'NetCDF 64bit offset'
1148	ENDIF
1149	ENDIF
1150	WRITE ( io, 344 ) output_format
1151	WRITE ( io, 341 ) dt_dots
1152	ENDIF
1153
1154	#if defined( __dvrp_graphics )
1155	!
1156	!-- Dvrp-output
1157	IF ( dt_dvrp /= 9999999.9 ) THEN
1158	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1159	TRIM( dvrp_username ), TRIM( dvrp_directory )
1160	i = 1
1161	l = 0
1162	m = 0
1163	DO WHILE ( mode_dvrp(i) /= ' ' )
1164	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1165	READ ( mode_dvrp(i), '(10X,I2)' ) j
1166	l = l + 1
1167	IF ( do3d(0,j) /= ' ' ) THEN
1168	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1169	isosurface_color(:,l)
1170	ENDIF
1171	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1172	READ ( mode_dvrp(i), '(6X,I2)' ) j
1173	m = m + 1
1174	IF ( do2d(0,j) /= ' ' ) THEN
1175	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1176	slicer_range_limits_dvrp(:,m)
1177	ENDIF
1178	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1179	WRITE ( io, 363 ) dvrp_psize
1180	IF ( particle_dvrpsize /= 'none' ) THEN
1181	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1182	dvrpsize_interval
1183	ENDIF
1184	IF ( particle_color /= 'none' ) THEN
1185	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1186	color_interval
1187	ENDIF
1188	ENDIF
1189	i = i + 1
1190	ENDDO
1191
1192	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1193	superelevation_y, superelevation, clip_dvrp_l, &
1194	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1195
1196	IF ( TRIM( topography ) /= 'flat' ) THEN
1197	WRITE ( io, 366 ) topography_color
1198	IF ( cluster_size > 1 ) THEN
1199	WRITE ( io, 367 ) cluster_size
1200	ENDIF
1201	ENDIF
1202
1203	ENDIF
1204	#endif
1205
1206	#if defined( __spectra )
1207	!
1208	!-- Spectra output
1209	IF ( dt_dosp /= 9999999.9 ) THEN
1210	WRITE ( io, 370 )
1211
1212	output_format = ''
1213	IF ( netcdf_output ) THEN
1214	IF ( netcdf_data_format == 1 ) THEN
1215	output_format = 'NetCDF classic'
1216	ELSE
1217	output_format = 'NetCDF 64bit offset'
1218	ENDIF
1219	ENDIF
1220	WRITE ( io, 344 ) output_format
1221	WRITE ( io, 371 ) dt_dosp
1222	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1223	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1224	( spectra_direction(i), i = 1,10 ), &
1225	( comp_spectra_level(i), i = 1,100 ), &
1226	( plot_spectra_level(i), i = 1,100 ), &
1227	averaging_interval_sp, dt_averaging_input_pr
1228	ENDIF
1229	#endif
1230
1231	WRITE ( io, 99 )
1232
1233	!
1234	!-- Physical quantities
1235	WRITE ( io, 400 )
1236
1237	!
1238	!-- Geostrophic parameters
1239	WRITE ( io, 410 ) omega, phi, f, fs
1240
1241	!
1242	!-- Other quantities
1243	WRITE ( io, 411 ) g
1244	IF ( use_reference ) THEN
1245	IF ( ocean ) THEN
1246	WRITE ( io, 412 ) prho_reference
1247	ELSE
1248	WRITE ( io, 413 ) pt_reference
1249	ENDIF
1250	ENDIF
1251
1252	!
1253	!-- Cloud physics parameters
1254	IF ( cloud_physics ) THEN
1255	WRITE ( io, 415 )
1256	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1257	ENDIF
1258
1259	!-- Profile of the geostrophic wind (component ug)
1260	!-- Building output strings
1261	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1262	gradients = '------'
1263	slices = ' 0'
1264	coordinates = ' 0.0'
1265	i = 1
1266	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1267
1268	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1269	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1270
1271	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1272	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1273
1274	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1275	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1276
1277	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1278	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1279
1280	IF ( i == 10 ) THEN
1281	EXIT
1282	ELSE
1283	i = i + 1
1284	ENDIF
1285
1286	ENDDO
1287
1288	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1289	TRIM( gradients ), TRIM( slices )
1290
1291	!-- Profile of the geostrophic wind (component vg)
1292	!-- Building output strings
1293	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1294	gradients = '------'
1295	slices = ' 0'
1296	coordinates = ' 0.0'
1297	i = 1
1298	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1299
1300	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1301	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1302
1303	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1304	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1305
1306	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1307	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1308
1309	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1310	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1311
1312	IF ( i == 10 ) THEN
1313	EXIT
1314	ELSE
1315	i = i + 1
1316	ENDIF
1317
1318	ENDDO
1319
1320	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1321	TRIM( gradients ), TRIM( slices )
1322
1323	!
1324	!-- Initial wind profiles
1325	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1326
1327	!
1328	!-- Initial temperature profile
1329	!-- Building output strings, starting with surface temperature
1330	WRITE ( temperatures, '(F6.2)' ) pt_surface
1331	gradients = '------'
1332	slices = ' 0'
1333	coordinates = ' 0.0'
1334	i = 1
1335	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1336
1337	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1338	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1339
1340	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1341	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1342
1343	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1344	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1345
1346	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1347	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1348
1349	IF ( i == 10 ) THEN
1350	EXIT
1351	ELSE
1352	i = i + 1
1353	ENDIF
1354
1355	ENDDO
1356
1357	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1358	TRIM( gradients ), TRIM( slices )
1359
1360	!
1361	!-- Initial humidity profile
1362	!-- Building output strings, starting with surface humidity
1363	IF ( humidity .OR. passive_scalar ) THEN
1364	WRITE ( temperatures, '(E8.1)' ) q_surface
1365	gradients = '--------'
1366	slices = ' 0'
1367	coordinates = ' 0.0'
1368	i = 1
1369	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1370
1371	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1372	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1373
1374	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1375	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1376
1377	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1378	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1379
1380	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1381	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1382
1383	IF ( i == 10 ) THEN
1384	EXIT
1385	ELSE
1386	i = i + 1
1387	ENDIF
1388
1389	ENDDO
1390
1391	IF ( humidity ) THEN
1392	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1393	TRIM( gradients ), TRIM( slices )
1394	ELSE
1395	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1396	TRIM( gradients ), TRIM( slices )
1397	ENDIF
1398	ENDIF
1399
1400	!
1401	!-- Initial salinity profile
1402	!-- Building output strings, starting with surface salinity
1403	IF ( ocean ) THEN
1404	WRITE ( temperatures, '(F6.2)' ) sa_surface
1405	gradients = '------'
1406	slices = ' 0'
1407	coordinates = ' 0.0'
1408	i = 1
1409	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1410
1411	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1412	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1413
1414	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1415	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1416
1417	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1418	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1419
1420	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1421	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1422
1423	IF ( i == 10 ) THEN
1424	EXIT
1425	ELSE
1426	i = i + 1
1427	ENDIF
1428
1429	ENDDO
1430
1431	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1432	TRIM( gradients ), TRIM( slices )
1433	ENDIF
1434
1435	!
1436	!-- Profile for the large scale vertial velocity
1437	!-- Building output strings, starting with surface value
1438	IF ( large_scale_subsidence ) THEN
1439	temperatures = ' 0.0'
1440	gradients = '------'
1441	slices = ' 0'
1442	coordinates = ' 0.0'
1443	i = 1
1444	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1445
1446	WRITE (coor_chr,'(E10.2,7X)') &
1447	w_subs(subs_vertical_gradient_level_i(i))
1448	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1449
1450	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1451	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1452
1453	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1454	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1455
1456	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1457	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1458
1459	IF ( i == 10 ) THEN
1460	EXIT
1461	ELSE
1462	i = i + 1
1463	ENDIF
1464
1465	ENDDO
1466
1467	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1468	TRIM( gradients ), TRIM( slices )
1469	ENDIF
1470
1471	!
1472	!-- Cloud physcis parameters / quantities / numerical methods
1473	WRITE ( io, 430 )
1474	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1475	WRITE ( io, 431 )
1476	ELSEIF ( humidity .AND. cloud_physics ) THEN
1477	WRITE ( io, 432 )
1478	IF ( radiation ) WRITE ( io, 132 )
1479	IF ( precipitation ) WRITE ( io, 133 )
1480	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1481	WRITE ( io, 433 )
1482	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1483	IF ( collision_kernel /= 'none' ) THEN
1484	WRITE ( io, 435 ) TRIM( collision_kernel )
1485	IF ( collision_kernel(6:9) == 'fast' ) THEN
1486	WRITE ( io, 436 ) radius_classes, dissipation_classes
1487	ENDIF
1488	ELSE
1489	WRITE ( io, 437 )
1490	ENDIF
1491	ENDIF
1492
1493	!
1494	!-- LES / turbulence parameters
1495	WRITE ( io, 450 )
1496
1497	!--
1498	! ... LES-constants used must still be added here
1499	!--
1500	IF ( constant_diffusion ) THEN
1501	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1502	prandtl_number
1503	ENDIF
1504	IF ( .NOT. constant_diffusion) THEN
1505	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1506	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1507	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1508	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1509	ENDIF
1510
1511	!
1512	!-- Special actions during the run
1513	WRITE ( io, 470 )
1514	IF ( create_disturbances ) THEN
1515	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1516	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1517	zu(disturbance_level_ind_t), disturbance_level_ind_t
1518	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1519	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1520	ELSE
1521	WRITE ( io, 473 ) disturbance_energy_limit
1522	ENDIF
1523	WRITE ( io, 474 ) TRIM( random_generator )
1524	ENDIF
1525	IF ( pt_surface_initial_change /= 0.0 ) THEN
1526	WRITE ( io, 475 ) pt_surface_initial_change
1527	ENDIF
1528	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1529	WRITE ( io, 476 ) q_surface_initial_change
1530	ENDIF
1531	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1532	WRITE ( io, 477 ) q_surface_initial_change
1533	ENDIF
1534
1535	IF ( particle_advection ) THEN
1536	!
1537	!-- Particle attributes
1538	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1539	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1540	end_time_prel, dt_sort_particles
1541	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1542	IF ( random_start_position ) WRITE ( io, 481 )
1543	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1544	WRITE ( io, 495 ) total_number_of_particles
1545	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1546	WRITE ( io, 483 ) maximum_number_of_tailpoints
1547	IF ( minimum_tailpoint_distance /= 0 ) THEN
1548	WRITE ( io, 484 ) total_number_of_tails, &
1549	minimum_tailpoint_distance, &
1550	maximum_tailpoint_age
1551	ENDIF
1552	ENDIF
1553	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1554	WRITE ( io, 485 ) dt_write_particle_data
1555	output_format = ''
1556	IF ( netcdf_output ) THEN
1557	IF ( netcdf_data_format > 1 ) THEN
1558	output_format = 'netcdf (64 bit offset) and binary'
1559	ELSE
1560	output_format = 'netcdf and binary'
1561	ENDIF
1562	ELSE
1563	output_format = 'binary'
1564	ENDIF
1565	WRITE ( io, 344 ) output_format
1566	ENDIF
1567	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1568	IF ( write_particle_statistics ) WRITE ( io, 486 )
1569
1570	WRITE ( io, 487 ) number_of_particle_groups
1571
1572	DO i = 1, number_of_particle_groups
1573	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1574	WRITE ( io, 490 ) i, 0.0
1575	WRITE ( io, 492 )
1576	ELSE
1577	WRITE ( io, 490 ) i, radius(i)
1578	IF ( density_ratio(i) /= 0.0 ) THEN
1579	WRITE ( io, 491 ) density_ratio(i)
1580	ELSE
1581	WRITE ( io, 492 )
1582	ENDIF
1583	ENDIF
1584	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1585	pdx(i), pdy(i), pdz(i)
1586	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1587	ENDDO
1588
1589	ENDIF
1590
1591
1592	!
1593	!-- Parameters of 1D-model
1594	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1595	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1596	mixing_length_1d, dissipation_1d
1597	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1598	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1599	ENDIF
1600	ENDIF
1601
1602	!
1603	!-- User-defined informations
1604	CALL user_header( io )
1605
1606	WRITE ( io, 99 )
1607
1608	!
1609	!-- Write buffer contents to disc immediately
1610	CALL local_flush( io )
1611
1612	!
1613	!-- Here the FORMATs start
1614
1615	99 FORMAT (1X,78('-'))
1616	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1617	1X,'* ',A,' *',9X,A/ &
1618	1X,'***************************',9X,42('-'))
1619	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1620	37X,42('-'))
1621	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1622	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1623	' Run on host: ',A10)
1624	#if defined( __parallel )
1625	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1626	')',1X,A)
1627	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1628	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1629	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1630	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1631	37X,'because the job is running on an SMP-cluster')
1632	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1633	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1634	#endif
1635	110 FORMAT (/' Numerical Schemes:'/ &
1636	' -----------------'/)
1637	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1638	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1639	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1640	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1641	' or Upstream')
1642	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1643	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1644	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1645	' or Upstream')
1646	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1647	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1648	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1649	' Translation velocity = ',A/ &
1650	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1651	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1652	' of timestep changes)')
1653	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1654	' timestep changes')
1655	122 FORMAT (' --> Time differencing scheme: ',A)
1656	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1657	' maximum damping coefficient: ',F5.3, ' 1/s')
1658	124 FORMAT (' Spline-overshoots are being suppressed')
1659	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1660	' of'/ &
1661	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1662	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1663	' of'/ &
1664	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1665	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1666	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1667	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1668	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1669	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1670	130 FORMAT (' --> Additional prognostic equation for the total water content')
1671	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1672	F6.2, ' K assumed')
1673	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1674	' effective emissivity scheme')
1675	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1676	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1677	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1678	A,'-cycle)'/ &
1679	' number of grid levels: ',I2/ &
1680	' Gauss-Seidel red/black iterations: ',I2)
1681	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1682	I3,')')
1683	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1684	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1685	I3,')'/ &
1686	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1687	I3,')')
1688	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1689	139 FORMAT (' --> Loop optimization method: ',A)
1690	140 FORMAT (' maximum residual allowed: ',E10.3)
1691	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1692	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1693	'step')
1694	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1695	'kinetic energy')
1696	144 FORMAT (' masking method is used')
1697	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1698	'conserved'/ &
1699	' using the ',A,' mode')
1700	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1701	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1702	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1703	/' starting from dp_level_b =', F8.3, 'm', A /)
1704	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1705	'prognostic equation for')
1706	154 FORMAT (' the potential temperature')
1707	200 FORMAT (//' Run time and time step information:'/ &
1708	' ----------------------------------'/)
1709	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1710	' CFL-factor: ',F4.2)
1711	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1712	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1713	' End time: ',F9.3,' s')
1714	204 FORMAT ( A,F9.3,' s')
1715	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1716	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1717	' CPU-time used: ',F9.3,' s per timestep: ', &
1718	' ',F9.3,' s'/ &
1719	' per second of simulated tim', &
1720	'e: ',F9.3,' s')
1721	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1722	250 FORMAT (//' Computational grid and domain size:'/ &
1723	' ----------------------------------'// &
1724	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1725	' m dz = ',F7.3,' m'/ &
1726	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1727	' m z(u) = ',F10.3,' m'/)
1728	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1729	' factor: ',F5.3/ &
1730	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1731	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1732	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1733	255 FORMAT (' Subdomains have equal size')
1734	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1735	'have smaller sizes'/ &
1736	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1737	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1738	' degrees')
1739	270 FORMAT (//' Topography informations:'/ &
1740	' -----------------------'// &
1741	1X,'Topography: ',A)
1742	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1743	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1744	' / ',I4)
1745	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1746	' direction' / &
1747	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1748	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1749	278 FORMAT (' Topography grid definition convention:'/ &
1750	' cell edge (staggered grid points'/ &
1751	' (u in x-direction, v in y-direction))' /)
1752	279 FORMAT (' Topography grid definition convention:'/ &
1753	' cell center (scalar grid points)' /)
1754	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1755	' ------------------------------'// &
1756	' Canopy mode: ', A / &
1757	' Canopy top: ',I4 / &
1758	' Leaf drag coefficient: ',F6.2 /)
1759	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1760	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1761	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1762	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1763	' Height: ',A,' m'/ &
1764	' Leaf area density: ',A,' m2/m3'/ &
1765	' Gradient: ',A,' m2/m4'/ &
1766	' Gridpoint: ',A)
1767
1768	300 FORMAT (//' Boundary conditions:'/ &
1769	' -------------------'// &
1770	' p uv ', &
1771	' pt'// &
1772	' B. bound.: ',A/ &
1773	' T. bound.: ',A)
1774	301 FORMAT (/' ',A// &
1775	' B. bound.: ',A/ &
1776	' T. bound.: ',A)
1777	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1778	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1779	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1780	'computational u,v-level:'// &
1781	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1782	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1783	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1784	307 FORMAT (' Heatflux has a random normal distribution')
1785	308 FORMAT (' Predefined surface temperature')
1786	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1787	310 FORMAT (//' 1D-Model:'// &
1788	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1789	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1790	312 FORMAT (' Predefined surface humidity')
1791	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1792	314 FORMAT (' Predefined scalar value at the surface')
1793	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1794	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1795	'atmosphere model')
1796	317 FORMAT (//' Lateral boundaries:'/ &
1797	' left/right: ',A/ &
1798	' north/south: ',A)
1799	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1800	'max =',F5.1,' m**2/s')
1801	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1802	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1803	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1804	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1805	' v: ',F9.6,' m2/s2')
1806	325 FORMAT (//' List output:'/ &
1807	' -----------'// &
1808	' 1D-Profiles:'/ &
1809	' Output every ',F8.2,' s')
1810	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1811	' Averaging input every ',F8.2,' s')
1812	330 FORMAT (//' Data output:'/ &
1813	' -----------'/)
1814	331 FORMAT (/' 1D-Profiles:')
1815	332 FORMAT (/' ',A)
1816	333 FORMAT (' Output every ',F8.2,' s',/ &
1817	' Time averaged over ',F8.2,' s'/ &
1818	' Averaging input every ',F8.2,' s')
1819	334 FORMAT (/' 2D-Arrays',A,':')
1820	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1821	' Output every ',F8.2,' s ',A/ &
1822	' Cross sections at ',A1,' = ',A/ &
1823	' scalar-coordinates: ',A,' m'/)
1824	336 FORMAT (/' 3D-Arrays',A,':')
1825	337 FORMAT (/' Arrays: ',A/ &
1826	' Output every ',F8.2,' s ',A/ &
1827	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1828	338 FORMAT (' Compressed data output'/ &
1829	' Decimal precision: ',A/)
1830	339 FORMAT (' No output during initial ',F8.2,' s')
1831	340 FORMAT (/' Time series:')
1832	341 FORMAT (' Output every ',F8.2,' s'/)
1833	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1834	' Output every ',F8.2,' s ',A/ &
1835	' Time averaged over ',F8.2,' s'/ &
1836	' Averaging input every ',F8.2,' s'/ &
1837	' Cross sections at ',A1,' = ',A/ &
1838	' scalar-coordinates: ',A,' m'/)
1839	343 FORMAT (/' Arrays: ',A/ &
1840	' Output every ',F8.2,' s ',A/ &
1841	' Time averaged over ',F8.2,' s'/ &
1842	' Averaging input every ',F8.2,' s'/ &
1843	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1844	344 FORMAT (' Output format: ',A/)
1845	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1846	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1847	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1848	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1849	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1850	347 FORMAT (' Variables: ',A/ &
1851	' Output every ',F8.2,' s')
1852	348 FORMAT (' Variables: ',A/ &
1853	' Output every ',F8.2,' s'/ &
1854	' Time averaged over ',F8.2,' s'/ &
1855	' Averaging input every ',F8.2,' s')
1856	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1857	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1858	13(' ',8(F8.2,',')/) )
1859	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1860	'all gridpoints along ',A,'-direction (default).' )
1861	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1862	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1863	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1864	#if defined( __dvrp_graphics )
1865	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1866	' Output every ',F7.1,' s'/ &
1867	' Output mode: ',A/ &
1868	' Host / User: ',A,' / ',A/ &
1869	' Directory: ',A// &
1870	' The sequence contains:')
1871	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1872	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1873	362 FORMAT (/' Slicer plane ',A/ &
1874	' Slicer limits: [',F6.2,',',F6.2,']')
1875	363 FORMAT (/' Particles'/ &
1876	' particle size: ',F7.2,' m')
1877	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1878	F6.2,',',F6.2,']')
1879	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1880	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1881	')'/ &
1882	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1883	' from y = ',F9.1,' m to y = ',F9.1,' m')
1884	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1885	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1886	#endif
1887	#if defined( __spectra )
1888	370 FORMAT (' Spectra:')
1889	371 FORMAT (' Output every ',F7.1,' s'/)
1890	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1891	' Directions: ', 10(A5,',')/ &
1892	' height levels k = ', 20(I3,',')/ &
1893	' ', 20(I3,',')/ &
1894	' ', 20(I3,',')/ &
1895	' ', 20(I3,',')/ &
1896	' ', 19(I3,','),I3,'.'/ &
1897	' height levels selected for standard plot:'/ &
1898	' k = ', 20(I3,',')/ &
1899	' ', 20(I3,',')/ &
1900	' ', 20(I3,',')/ &
1901	' ', 20(I3,',')/ &
1902	' ', 19(I3,','),I3,'.'/ &
1903	' Time averaged over ', F7.1, ' s,' / &
1904	' Profiles for the time averaging are taken every ', &
1905	F6.1,' s')
1906	#endif
1907	400 FORMAT (//' Physical quantities:'/ &
1908	' -------------------'/)
1909	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1910	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1911	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1912	' f* = ',F9.6,' 1/s')
1913	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1914	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1915	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1916	415 FORMAT (/' Cloud physics parameters:'/ &
1917	' ------------------------'/)
1918	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1919	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1920	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1921	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1922	' Vapourization heat : L_v = ',E8.2,' J/kg')
1923	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1924	' Height: ',A,' m'/ &
1925	' Temperature: ',A,' K'/ &
1926	' Gradient: ',A,' K/100m'/ &
1927	' Gridpoint: ',A)
1928	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1929	' Height: ',A,' m'/ &
1930	' Humidity: ',A,' kg/kg'/ &
1931	' Gradient: ',A,' (kg/kg)/100m'/ &
1932	' Gridpoint: ',A)
1933	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1934	' Height: ',A,' m'/ &
1935	' Scalar concentration: ',A,' kg/m**3'/ &
1936	' Gradient: ',A,' (kg/m**3)/100m'/ &
1937	' Gridpoint: ',A)
1938	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1939	' Height: ',A,' m'/ &
1940	' ug: ',A,' m/s'/ &
1941	' Gradient: ',A,' 1/100s'/ &
1942	' Gridpoint: ',A)
1943	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1944	' Height: ',A,' m'/ &
1945	' vg: ',A,' m/s'/ &
1946	' Gradient: ',A,' 1/100s'/ &
1947	' Gridpoint: ',A)
1948	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1949	' Height: ',A,' m'/ &
1950	' Salinity: ',A,' psu'/ &
1951	' Gradient: ',A,' psu/100m'/ &
1952	' Gridpoint: ',A)
1953	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1954	' Height: ',A,' m'/ &
1955	' w_subs: ',A,' m/s'/ &
1956	' Gradient: ',A,' (m/s)/100m'/ &
1957	' Gridpoint: ',A)
1958	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1959	' profiles')
1960	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1961	' ----------------------------------'/)
1962	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1963	'on)')
1964	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1965	' total water content is used.'/ &
1966	' Condensation is parameterized via 0% - or 100% scheme.')
1967	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1968	'icle model')
1969	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1970	' droplets < 1.0E-6 m')
1971	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1972	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1973	'are used'/ &
1974	' number of radius classes: ',I3,' interval ', &
1975	'[1.0E-6,2.0E-4] m'/ &
1976	' number of dissipation classes: ',I2,' interval ', &
1977	'[0,1000] cm2/s3')
1978	437 FORMAT (' Droplet collision is switched off')
1979	450 FORMAT (//' LES / Turbulence quantities:'/ &
1980	' ---------------------------'/)
1981	451 FORMAT (' Diffusion coefficients are constant:'/ &
1982	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1983	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1984	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1985	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1986	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1987	470 FORMAT (//' Actions during the simulation:'/ &
1988	' -----------------------------'/)
1989	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1990	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1991	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1992	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1993	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1994	' to i/j =',I4)
1995	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1996	1X,F5.3, ' m2/s2')
1997	474 FORMAT (' Random number generator used : ',A/)
1998	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1999	'respectively, if'/ &
2000	' the value is negative) by ',F5.2,' K at the beginning of the',&
2001	' 3D-simulation'/)
2002	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2003	'respectively, if the'/ &
2004	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2005	' the 3D-simulation'/)
2006	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2007	'respectively, if the'/ &
2008	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2009	' the 3D-simulation'/)
2010	480 FORMAT (' Particles:'/ &
2011	' ---------'// &
2012	' Particle advection is active (switched on at t = ', F7.1, &
2013	' s)'/ &
2014	' Start of new particle generations every ',F6.1,' s'/ &
2015	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2016	' bottom: ', A, ' top: ', A/&
2017	' Maximum particle age: ',F9.1,' s'/ &
2018	' Advection stopped at t = ',F9.1,' s'/ &
2019	' Particles are sorted every ',F9.1,' s'/)
2020	481 FORMAT (' Particles have random start positions'/)
2021	482 FORMAT (' Particles are advected only horizontally'/)
2022	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2023	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2024	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2025	' Maximum age of the end of the tail: ',F8.2,' s')
2026	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2027	486 FORMAT (' Particle statistics are written on file'/)
2028	487 FORMAT (' Number of particle groups: ',I2/)
2029	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2030	' minimum timestep for advection: ', F7.5/)
2031	489 FORMAT (' Number of particles simultaneously released at each ', &
2032	'point: ', I5/)
2033	490 FORMAT (' Particle group ',I2,':'/ &
2034	' Particle radius: ',E10.3, 'm')
2035	491 FORMAT (' Particle inertia is activated'/ &
2036	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2037	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2038	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2039	' y:',F8.1,' - ',F8.1,' m'/&
2040	' z:',F8.1,' - ',F8.1,' m'/&
2041	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2042	' m dz = ',F8.1,' m'/)
2043	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2044	F8.2,' s'/)
2045	495 FORMAT (' Number of particles in total domain: ',I10/)
2046	500 FORMAT (//' 1D-Model parameters:'/ &
2047	' -------------------'// &
2048	' Simulation time: ',F8.1,' s'/ &
2049	' Run-controll output every: ',F8.1,' s'/ &
2050	' Vertical profile output every: ',F8.1,' s'/ &
2051	' Mixing length calculation: ',A/ &
2052	' Dissipation calculation: ',A/)
2053	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2054	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2055	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2056
2057
2058	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |