Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 925

Last change on this file since 925 was 869, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.7 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 869 2012-03-28 12:21:50Z maronga $
11	!
12	! 868 2012-03-28 12:21:07Z raasch
13	! translation velocity in Galilean transformation changed to 0.6 * ug
14	!
15	! 833 2012-02-22 08:55:55Z maronga
16	! Adjusted format for leaf area density
17	!
18	! 828 2012-02-21 12:00:36Z raasch
19	! output of dissipation_classes + radius_classes
20	!
21	! 825 2012-02-19 03:03:44Z raasch
22	! Output of cloud physics parameters/quantities complemented and restructured
23	!
24	! 767 2011-10-14 06:39:12Z raasch
25	! Output of given initial u,v-profiles
26	!
27	! 759 2011-09-15 13:58:31Z raasch
28	! output of maximum number of parallel io streams
29	!
30	! 707 2011-03-29 11:39:40Z raasch
31	! bc_lr/ns replaced by bc_lr/ns_cyc
32	!
33	! 667 2010-12-23 12:06:00Z suehring/gryschka
34	! Output of advection scheme.
35	! Modified output of Prandtl-layer height.
36	!
37	! 580 2010-10-05 13:59:11Z heinze
38	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
39	! ws_vertical_gradient_level to subs_vertical_gradient_level and
40	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
41	!
42	! 493 2010-03-01 08:30:24Z raasch
43	! NetCDF data output format extendend for NetCDF4/HDF5
44	!
45	! 449 2010-02-02 11:23:59Z raasch
46	! +large scale vertical motion (subsidence/ascent)
47	! Bugfix: index problem concerning gradient_level indices removed
48	!
49	! 410 2009-12-04 17:05:40Z letzel
50	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
51	! mask_scale\|_x\|y\|z, masks, skip_time_domask
52	!
53	! 346 2009-07-06 10:13:41Z raasch
54	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
55	! Coupling with independent precursor runs.
56	! Output of messages replaced by message handling routine.
57	! Output of several additional dvr parameters
58	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
59	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
60	! dp_smooth, dpdxy, u_bulk, v_bulk
61	! topography_grid_convention moved from user_header
62	! small bugfix concerning 3d 64bit netcdf output format
63	!
64	! 206 2008-10-13 14:59:11Z raasch
65	! Bugfix: error in zu index in case of section_xy = -1
66	!
67	! 198 2008-09-17 08:55:28Z raasch
68	! Format adjustments allowing output of larger revision numbers
69	!
70	! 197 2008-09-16 15:29:03Z raasch
71	! allow 100 spectra levels instead of 10 for consistency with
72	! define_netcdf_header,
73	! bugfix in the output of the characteristic levels of potential temperature,
74	! geostrophic wind, scalar concentration, humidity and leaf area density,
75	! output of turbulence recycling informations
76	!
77	! 138 2007-11-28 10:03:58Z letzel
78	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
79	! Allow two instead of one digit to specify isosurface and slicer variables.
80	! Output of sorting frequency of particles
81	!
82	! 108 2007-08-24 15:10:38Z letzel
83	! Output of informations for coupled model runs (boundary conditions etc.)
84	! + output of momentumfluxes at the top boundary
85	! Rayleigh damping for ocean, e_init
86	!
87	! 97 2007-06-21 08:23:15Z raasch
88	! Adjustments for the ocean version.
89	! use_pt_reference renamed use_reference
90	!
91	! 87 2007-05-22 15:46:47Z raasch
92	! Bugfix: output of use_upstream_for_tke
93	!
94	! 82 2007-04-16 15:40:52Z raasch
95	! Preprocessor strings for different linux clusters changed to "lc",
96	! routine local_flush is used for buffer flushing
97	!
98	! 76 2007-03-29 00:58:32Z raasch
99	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
100	! output of the loop optimization method, moisture renamed humidity,
101	! output of subversion revision number
102	!
103	! 19 2007-02-23 04:53:48Z raasch
104	! Output of scalar flux applied at top boundary
105	!
106	! RCS Log replace by Id keyword, revision history cleaned up
107	!
108	! Revision 1.63 2006/08/22 13:53:13 raasch
109	! Output of dz_max
110	!
111	! Revision 1.1 1997/08/11 06:17:20 raasch
112	! Initial revision
113	!
114	!
115	! Description:
116	! ------------
117	! Writing a header with all important informations about the actual run.
118	! This subroutine is called three times, two times at the beginning
119	! (writing information on files RUN_CONTROL and HEADER) and one time at the
120	! end of the run, then writing additional information about CPU-usage on file
121	! header.
122	!-----------------------------------------------------------------------------!
123
124	USE arrays_3d
125	USE control_parameters
126	USE cloud_parameters
127	USE cpulog
128	USE dvrp_variables
129	USE grid_variables
130	USE indices
131	USE model_1d
132	USE particle_attributes
133	USE pegrid
134	USE subsidence_mod
135	USE spectrum
136
137	IMPLICIT NONE
138
139	CHARACTER (LEN=1) :: prec
140	CHARACTER (LEN=2) :: do2d_mode
141	CHARACTER (LEN=5) :: section_chr
142	CHARACTER (LEN=9) :: time_to_string
143	CHARACTER (LEN=10) :: coor_chr, host_chr
144	CHARACTER (LEN=16) :: begin_chr
145	CHARACTER (LEN=23) :: ver_rev
146	CHARACTER (LEN=40) :: output_format
147	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
148	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
149	domask_chr, run_classification
150	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
151	temperatures, ugcomponent, vgcomponent
152	CHARACTER (LEN=85) :: roben, runten
153
154	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
155
156	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
157	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
158	REAL :: cpuseconds_per_simulated_second
159
160	!
161	!-- Open the output file. At the end of the simulation, output is directed
162	!-- to unit 19.
163	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
164	.NOT. simulated_time_at_begin /= simulated_time ) THEN
165	io = 15 ! header output on file RUN_CONTROL
166	ELSE
167	io = 19 ! header output on file HEADER
168	ENDIF
169	CALL check_open( io )
170
171	!
172	!-- At the end of the run, output file (HEADER) will be rewritten with
173	!-- new informations
174	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
175
176	!
177	!-- Determine kind of model run
178	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
179	run_classification = '3D - restart run'
180	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
181	run_classification = '3D - run with cyclic fill of 3D - prerun data'
182	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
183	run_classification = '3D - run without 1D - prerun'
184	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
185	run_classification = '3D - run with 1D - prerun'
186	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
187	run_classification = '3D - run initialized by user'
188	ELSE
189	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
190	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
191	ENDIF
192	IF ( ocean ) THEN
193	run_classification = 'ocean - ' // run_classification
194	ELSE
195	run_classification = 'atmosphere - ' // run_classification
196	ENDIF
197
198	!
199	!-- Run-identification, date, time, host
200	host_chr = host(1:10)
201	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
202	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
203	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
204	#if defined( __mpi2 )
205	mpi_type = 2
206	#else
207	mpi_type = 1
208	#endif
209	WRITE ( io, 101 ) mpi_type, coupling_mode
210	ENDIF
211	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
212	ADJUSTR( host_chr )
213	#if defined( __parallel )
214	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
215	char1 = 'calculated'
216	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
217	host(1:2) == 'lc' ) .AND. &
218	npex == -1 .AND. pdims(2) == 1 ) THEN
219	char1 = 'forced'
220	ELSE
221	char1 = 'predefined'
222	ENDIF
223	IF ( threads_per_task == 1 ) THEN
224	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
225	ELSE
226	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
227	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
228	ENDIF
229	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
230	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
231	npex == -1 .AND. pdims(2) == 1 ) &
232	THEN
233	WRITE ( io, 106 )
234	ELSEIF ( pdims(2) == 1 ) THEN
235	WRITE ( io, 107 ) 'x'
236	ELSEIF ( pdims(1) == 1 ) THEN
237	WRITE ( io, 107 ) 'y'
238	ENDIF
239	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
240	IF ( numprocs /= maximum_parallel_io_streams ) THEN
241	WRITE ( io, 108 ) maximum_parallel_io_streams
242	ENDIF
243	#endif
244	WRITE ( io, 99 )
245
246	!
247	!-- Numerical schemes
248	WRITE ( io, 110 )
249	IF ( psolver(1:7) == 'poisfft' ) THEN
250	WRITE ( io, 111 ) TRIM( fft_method )
251	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
252	ELSEIF ( psolver == 'sor' ) THEN
253	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
254	ELSEIF ( psolver == 'multigrid' ) THEN
255	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
256	IF ( mg_cycles == -1 ) THEN
257	WRITE ( io, 140 ) residual_limit
258	ELSE
259	WRITE ( io, 141 ) mg_cycles
260	ENDIF
261	IF ( mg_switch_to_pe0_level == 0 ) THEN
262	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
263	nzt_mg(1)
264	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
265	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
266	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
267	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
268	nzt_mg(mg_switch_to_pe0_level), &
269	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
270	nzt_mg(1)
271	ENDIF
272	ENDIF
273	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
274	THEN
275	WRITE ( io, 142 )
276	ENDIF
277
278	IF ( momentum_advec == 'pw-scheme' ) THEN
279	WRITE ( io, 113 )
280	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
281	WRITE ( io, 503 )
282	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
283	WRITE ( io, 114 )
284	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
285	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
286	overshoot_limit_w /= 0.0 ) THEN
287	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
288	overshoot_limit_w
289	ENDIF
290	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
291	ups_limit_w /= 0.0 ) &
292	THEN
293	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
294	ENDIF
295	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
296	ENDIF
297	IF ( scalar_advec == 'pw-scheme' ) THEN
298	WRITE ( io, 116 )
299	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
300	WRITE ( io, 504 )
301	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
302	WRITE ( io, 117 )
303	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
304	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
305	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
306	ENDIF
307	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
308	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
309	ENDIF
310	ELSE
311	WRITE ( io, 118 )
312	ENDIF
313
314	WRITE ( io, 139 ) TRIM( loop_optimization )
315
316	IF ( galilei_transformation ) THEN
317	IF ( use_ug_for_galilei_tr ) THEN
318	char1 = '0.6 * geostrophic wind'
319	ELSE
320	char1 = 'mean wind in model domain'
321	ENDIF
322	IF ( simulated_time_at_begin == simulated_time ) THEN
323	char2 = 'at the start of the run'
324	ELSE
325	char2 = 'at the end of the run'
326	ENDIF
327	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
328	advected_distance_x/1000.0, advected_distance_y/1000.0
329	ENDIF
330	IF ( timestep_scheme == 'leapfrog' ) THEN
331	WRITE ( io, 120 )
332	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
333	WRITE ( io, 121 )
334	ELSE
335	WRITE ( io, 122 ) timestep_scheme
336	ENDIF
337	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
338	IF ( rayleigh_damping_factor /= 0.0 ) THEN
339	IF ( .NOT. ocean ) THEN
340	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
341	rayleigh_damping_factor
342	ELSE
343	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
344	rayleigh_damping_factor
345	ENDIF
346	ENDIF
347	IF ( humidity ) THEN
348	IF ( .NOT. cloud_physics ) THEN
349	WRITE ( io, 129 )
350	ELSE
351	WRITE ( io, 130 )
352	ENDIF
353	ENDIF
354	IF ( passive_scalar ) WRITE ( io, 134 )
355	IF ( conserve_volume_flow ) THEN
356	WRITE ( io, 150 ) conserve_volume_flow_mode
357	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
358	WRITE ( io, 151 ) u_bulk, v_bulk
359	ENDIF
360	ELSEIF ( dp_external ) THEN
361	IF ( dp_smooth ) THEN
362	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
363	ELSE
364	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
365	ENDIF
366	ENDIF
367	IF ( large_scale_subsidence ) THEN
368	WRITE ( io, 153 )
369	WRITE ( io, 154 )
370	ENDIF
371	WRITE ( io, 99 )
372
373	!
374	!-- Runtime and timestep informations
375	WRITE ( io, 200 )
376	IF ( .NOT. dt_fixed ) THEN
377	WRITE ( io, 201 ) dt_max, cfl_factor
378	ELSE
379	WRITE ( io, 202 ) dt
380	ENDIF
381	WRITE ( io, 203 ) simulated_time_at_begin, end_time
382
383	IF ( time_restart /= 9999999.9 .AND. &
384	simulated_time_at_begin == simulated_time ) THEN
385	IF ( dt_restart == 9999999.9 ) THEN
386	WRITE ( io, 204 ) ' Restart at: ',time_restart
387	ELSE
388	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
389	ENDIF
390	ENDIF
391
392	IF ( simulated_time_at_begin /= simulated_time ) THEN
393	i = MAX ( log_point_s(10)%counts, 1 )
394	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
395	cpuseconds_per_simulated_second = 0.0
396	ELSE
397	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
398	( simulated_time - &
399	simulated_time_at_begin )
400	ENDIF
401	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
402	log_point_s(10)%sum / REAL( i ), &
403	cpuseconds_per_simulated_second
404	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
405	IF ( dt_restart == 9999999.9 ) THEN
406	WRITE ( io, 204 ) ' Next restart at: ',time_restart
407	ELSE
408	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
409	ENDIF
410	ENDIF
411	ENDIF
412
413	!
414	!-- Start time for coupled runs, if independent precursor runs for atmosphere
415	!-- and ocean are used. In this case, coupling_start_time defines the time
416	!-- when the coupling is switched on.
417	IF ( coupling_start_time /= 0.0 ) THEN
418	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
419	char1 = 'Precursor run for a coupled atmosphere-ocean run'
420	ELSE
421	char1 = 'Coupled atmosphere-ocean run following independent ' // &
422	'precursor runs'
423	ENDIF
424	WRITE ( io, 207 ) char1, coupling_start_time
425	ENDIF
426
427	!
428	!-- Computational grid
429	IF ( .NOT. ocean ) THEN
430	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
431	IF ( dz_stretch_level_index < nzt+1 ) THEN
432	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
433	dz_stretch_factor, dz_max
434	ENDIF
435	ELSE
436	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
437	IF ( dz_stretch_level_index > 0 ) THEN
438	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
439	dz_stretch_factor, dz_max
440	ENDIF
441	ENDIF
442	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
443	MIN( nnz+2, nzt+2 )
444	IF ( numprocs > 1 ) THEN
445	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
446	WRITE ( io, 255 )
447	ELSE
448	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
449	ENDIF
450	ENDIF
451	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
452
453	!
454	!-- Topography
455	WRITE ( io, 270 ) topography
456	SELECT CASE ( TRIM( topography ) )
457
458	CASE ( 'flat' )
459	! no actions necessary
460
461	CASE ( 'single_building' )
462	blx = INT( building_length_x / dx )
463	bly = INT( building_length_y / dy )
464	bh = INT( building_height / dz )
465
466	IF ( building_wall_left == 9999999.9 ) THEN
467	building_wall_left = ( nx + 1 - blx ) / 2 * dx
468	ENDIF
469	bxl = INT ( building_wall_left / dx + 0.5 )
470	bxr = bxl + blx
471
472	IF ( building_wall_south == 9999999.9 ) THEN
473	building_wall_south = ( ny + 1 - bly ) / 2 * dy
474	ENDIF
475	bys = INT ( building_wall_south / dy + 0.5 )
476	byn = bys + bly
477
478	WRITE ( io, 271 ) building_length_x, building_length_y, &
479	building_height, bxl, bxr, bys, byn
480
481	CASE ( 'single_street_canyon' )
482	ch = NINT( canyon_height / dz )
483	IF ( canyon_width_x /= 9999999.9 ) THEN
484	!
485	!-- Street canyon in y direction
486	cwx = NINT( canyon_width_x / dx )
487	IF ( canyon_wall_left == 9999999.9 ) THEN
488	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
489	ENDIF
490	cxl = NINT( canyon_wall_left / dx )
491	cxr = cxl + cwx
492	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
493
494	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
495	!
496	!-- Street canyon in x direction
497	cwy = NINT( canyon_width_y / dy )
498	IF ( canyon_wall_south == 9999999.9 ) THEN
499	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
500	ENDIF
501	cys = NINT( canyon_wall_south / dy )
502	cyn = cys + cwy
503	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
504	ENDIF
505
506	END SELECT
507
508	IF ( TRIM( topography ) /= 'flat' ) THEN
509	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
510	IF ( TRIM( topography ) == 'single_building' .OR. &
511	TRIM( topography ) == 'single_street_canyon' ) THEN
512	WRITE ( io, 278 )
513	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
514	WRITE ( io, 279 )
515	ENDIF
516	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
517	WRITE ( io, 278 )
518	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
519	WRITE ( io, 279 )
520	ENDIF
521	ENDIF
522
523	IF ( plant_canopy ) THEN
524
525	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
526	IF ( passive_scalar ) THEN
527	WRITE ( io, 281 ) scalar_exchange_coefficient, &
528	leaf_surface_concentration
529	ENDIF
530
531	!
532	!-- Heat flux at the top of vegetation
533	WRITE ( io, 282 ) cthf
534
535	!
536	!-- Leaf area density profile
537	!-- Building output strings, starting with surface value
538	WRITE ( learde, '(F6.4)' ) lad_surface
539	gradients = '------'
540	slices = ' 0'
541	coordinates = ' 0.0'
542	i = 1
543	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
544
545	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
546	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
547
548	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
549	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
550
551	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
552	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
553
554	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
555	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
556
557	i = i + 1
558	ENDDO
559
560	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
561	TRIM( gradients ), TRIM( slices )
562
563	ENDIF
564
565	!
566	!-- Boundary conditions
567	IF ( ibc_p_b == 0 ) THEN
568	runten = 'p(0) = 0 \|'
569	ELSEIF ( ibc_p_b == 1 ) THEN
570	runten = 'p(0) = p(1) \|'
571	ELSE
572	runten = 'p(0) = p(1) +R\|'
573	ENDIF
574	IF ( ibc_p_t == 0 ) THEN
575	roben = 'p(nzt+1) = 0 \|'
576	ELSE
577	roben = 'p(nzt+1) = p(nzt) \|'
578	ENDIF
579
580	IF ( ibc_uv_b == 0 ) THEN
581	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
582	ELSE
583	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
584	ENDIF
585	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
586	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
587	ELSEIF ( ibc_uv_t == 0 ) THEN
588	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
589	ELSE
590	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
591	ENDIF
592
593	IF ( ibc_pt_b == 0 ) THEN
594	runten = TRIM( runten ) // ' pt(0) = pt_surface'
595	ELSEIF ( ibc_pt_b == 1 ) THEN
596	runten = TRIM( runten ) // ' pt(0) = pt(1)'
597	ELSEIF ( ibc_pt_b == 2 ) THEN
598	runten = TRIM( runten ) // ' pt(0) = from coupled model'
599	ENDIF
600	IF ( ibc_pt_t == 0 ) THEN
601	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
602	ELSEIF( ibc_pt_t == 1 ) THEN
603	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
604	ELSEIF( ibc_pt_t == 2 ) THEN
605	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
606
607	ENDIF
608
609	WRITE ( io, 300 ) runten, roben
610
611	IF ( .NOT. constant_diffusion ) THEN
612	IF ( ibc_e_b == 1 ) THEN
613	runten = 'e(0) = e(1)'
614	ELSE
615	runten = 'e(0) = e(1) = (u/0.1)*2'
616	ENDIF
617	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
618
619	WRITE ( io, 301 ) 'e', runten, roben
620
621	ENDIF
622
623	IF ( ocean ) THEN
624	runten = 'sa(0) = sa(1)'
625	IF ( ibc_sa_t == 0 ) THEN
626	roben = 'sa(nzt+1) = sa_surface'
627	ELSE
628	roben = 'sa(nzt+1) = sa(nzt)'
629	ENDIF
630	WRITE ( io, 301 ) 'sa', runten, roben
631	ENDIF
632
633	IF ( humidity ) THEN
634	IF ( ibc_q_b == 0 ) THEN
635	runten = 'q(0) = q_surface'
636	ELSE
637	runten = 'q(0) = q(1)'
638	ENDIF
639	IF ( ibc_q_t == 0 ) THEN
640	roben = 'q(nzt) = q_top'
641	ELSE
642	roben = 'q(nzt) = q(nzt-1) + dq/dz'
643	ENDIF
644	WRITE ( io, 301 ) 'q', runten, roben
645	ENDIF
646
647	IF ( passive_scalar ) THEN
648	IF ( ibc_q_b == 0 ) THEN
649	runten = 's(0) = s_surface'
650	ELSE
651	runten = 's(0) = s(1)'
652	ENDIF
653	IF ( ibc_q_t == 0 ) THEN
654	roben = 's(nzt) = s_top'
655	ELSE
656	roben = 's(nzt) = s(nzt-1) + ds/dz'
657	ENDIF
658	WRITE ( io, 301 ) 's', runten, roben
659	ENDIF
660
661	IF ( use_surface_fluxes ) THEN
662	WRITE ( io, 303 )
663	IF ( constant_heatflux ) THEN
664	WRITE ( io, 306 ) surface_heatflux
665	IF ( random_heatflux ) WRITE ( io, 307 )
666	ENDIF
667	IF ( humidity .AND. constant_waterflux ) THEN
668	WRITE ( io, 311 ) surface_waterflux
669	ENDIF
670	IF ( passive_scalar .AND. constant_waterflux ) THEN
671	WRITE ( io, 313 ) surface_waterflux
672	ENDIF
673	ENDIF
674
675	IF ( use_top_fluxes ) THEN
676	WRITE ( io, 304 )
677	IF ( coupling_mode == 'uncoupled' ) THEN
678	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
679	IF ( constant_top_heatflux ) THEN
680	WRITE ( io, 306 ) top_heatflux
681	ENDIF
682	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
683	WRITE ( io, 316 )
684	ENDIF
685	IF ( ocean .AND. constant_top_salinityflux ) THEN
686	WRITE ( io, 309 ) top_salinityflux
687	ENDIF
688	IF ( humidity .OR. passive_scalar ) THEN
689	WRITE ( io, 315 )
690	ENDIF
691	ENDIF
692
693	IF ( prandtl_layer ) THEN
694	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
695	rif_min, rif_max
696	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
697	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
698	WRITE ( io, 312 )
699	ENDIF
700	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
701	WRITE ( io, 314 )
702	ENDIF
703	ELSE
704	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
705	WRITE ( io, 310 ) rif_min, rif_max
706	ENDIF
707	ENDIF
708
709	WRITE ( io, 317 ) bc_lr, bc_ns
710	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
711	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
712	IF ( turbulent_inflow ) THEN
713	WRITE ( io, 319 ) recycling_width, recycling_plane, &
714	inflow_damping_height, inflow_damping_width
715	ENDIF
716	ENDIF
717
718	!
719	!-- Listing of 1D-profiles
720	WRITE ( io, 325 ) dt_dopr_listing
721	IF ( averaging_interval_pr /= 0.0 ) THEN
722	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
723	ENDIF
724
725	!
726	!-- DATA output
727	WRITE ( io, 330 )
728	IF ( averaging_interval_pr /= 0.0 ) THEN
729	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
730	ENDIF
731
732	!
733	!-- 1D-profiles
734	dopr_chr = 'Profile:'
735	IF ( dopr_n /= 0 ) THEN
736	WRITE ( io, 331 )
737
738	output_format = ''
739	IF ( netcdf_output ) THEN
740	IF ( netcdf_data_format == 1 ) THEN
741	output_format = 'NetCDF classic'
742	ELSE
743	output_format = 'NetCDF 64bit offset'
744	ENDIF
745	ENDIF
746	IF ( profil_output ) THEN
747	IF ( netcdf_output ) THEN
748	output_format = TRIM( output_format ) // ' and profil'
749	ELSE
750	output_format = 'profil'
751	ENDIF
752	ENDIF
753	WRITE ( io, 344 ) output_format
754
755	DO i = 1, dopr_n
756	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
757	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
758	WRITE ( io, 332 ) dopr_chr
759	dopr_chr = ' :'
760	ENDIF
761	ENDDO
762
763	IF ( dopr_chr /= '' ) THEN
764	WRITE ( io, 332 ) dopr_chr
765	ENDIF
766	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
767	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
768	ENDIF
769
770	!
771	!-- 2D-arrays
772	DO av = 0, 1
773
774	i = 1
775	do2d_xy = ''
776	do2d_xz = ''
777	do2d_yz = ''
778	DO WHILE ( do2d(av,i) /= ' ' )
779
780	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
781	do2d_mode = do2d(av,i)(l-1:l)
782
783	SELECT CASE ( do2d_mode )
784	CASE ( 'xy' )
785	ll = LEN_TRIM( do2d_xy )
786	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
787	CASE ( 'xz' )
788	ll = LEN_TRIM( do2d_xz )
789	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
790	CASE ( 'yz' )
791	ll = LEN_TRIM( do2d_yz )
792	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
793	END SELECT
794
795	i = i + 1
796
797	ENDDO
798
799	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
800	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
801	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
802	( netcdf_output .OR. iso2d_output ) ) THEN
803
804	IF ( av == 0 ) THEN
805	WRITE ( io, 334 ) ''
806	ELSE
807	WRITE ( io, 334 ) '(time-averaged)'
808	ENDIF
809
810	IF ( do2d_at_begin ) THEN
811	begin_chr = 'and at the start'
812	ELSE
813	begin_chr = ''
814	ENDIF
815
816	output_format = ''
817	IF ( netcdf_output ) THEN
818	IF ( netcdf_data_format == 1 ) THEN
819	output_format = 'NetCDF classic'
820	ELSEIF ( netcdf_data_format == 2 ) THEN
821	output_format = 'NetCDF 64bit offset'
822	ELSEIF ( netcdf_data_format == 3 ) THEN
823	output_format = 'NetCDF4/HDF5'
824	ELSEIF ( netcdf_data_format == 4 ) THEN
825	output_format = 'NetCDF4/HDF5 clasic'
826	ENDIF
827	ENDIF
828	IF ( iso2d_output ) THEN
829	IF ( netcdf_output ) THEN
830	output_format = TRIM( output_format ) // ' and iso2d'
831	ELSE
832	output_format = 'iso2d'
833	ENDIF
834	ENDIF
835	WRITE ( io, 344 ) output_format
836
837	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
838	i = 1
839	slices = '/'
840	coordinates = '/'
841	!
842	!-- Building strings with index and coordinate informations of the
843	!-- slices
844	DO WHILE ( section(i,1) /= -9999 )
845
846	WRITE (section_chr,'(I5)') section(i,1)
847	section_chr = ADJUSTL( section_chr )
848	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
849
850	IF ( section(i,1) == -1 ) THEN
851	WRITE (coor_chr,'(F10.1)') -1.0
852	ELSE
853	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
854	ENDIF
855	coor_chr = ADJUSTL( coor_chr )
856	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
857
858	i = i + 1
859	ENDDO
860	IF ( av == 0 ) THEN
861	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
862	TRIM( begin_chr ), 'k', TRIM( slices ), &
863	TRIM( coordinates )
864	IF ( skip_time_do2d_xy /= 0.0 ) THEN
865	WRITE ( io, 339 ) skip_time_do2d_xy
866	ENDIF
867	ELSE
868	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
869	TRIM( begin_chr ), averaging_interval, &
870	dt_averaging_input, 'k', TRIM( slices ), &
871	TRIM( coordinates )
872	IF ( skip_time_data_output_av /= 0.0 ) THEN
873	WRITE ( io, 339 ) skip_time_data_output_av
874	ENDIF
875	ENDIF
876
877	ENDIF
878
879	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
880	i = 1
881	slices = '/'
882	coordinates = '/'
883	!
884	!-- Building strings with index and coordinate informations of the
885	!-- slices
886	DO WHILE ( section(i,2) /= -9999 )
887
888	WRITE (section_chr,'(I5)') section(i,2)
889	section_chr = ADJUSTL( section_chr )
890	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
891
892	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
893	coor_chr = ADJUSTL( coor_chr )
894	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
895
896	i = i + 1
897	ENDDO
898	IF ( av == 0 ) THEN
899	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
900	TRIM( begin_chr ), 'j', TRIM( slices ), &
901	TRIM( coordinates )
902	IF ( skip_time_do2d_xz /= 0.0 ) THEN
903	WRITE ( io, 339 ) skip_time_do2d_xz
904	ENDIF
905	ELSE
906	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
907	TRIM( begin_chr ), averaging_interval, &
908	dt_averaging_input, 'j', TRIM( slices ), &
909	TRIM( coordinates )
910	IF ( skip_time_data_output_av /= 0.0 ) THEN
911	WRITE ( io, 339 ) skip_time_data_output_av
912	ENDIF
913	ENDIF
914	ENDIF
915
916	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
917	i = 1
918	slices = '/'
919	coordinates = '/'
920	!
921	!-- Building strings with index and coordinate informations of the
922	!-- slices
923	DO WHILE ( section(i,3) /= -9999 )
924
925	WRITE (section_chr,'(I5)') section(i,3)
926	section_chr = ADJUSTL( section_chr )
927	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
928
929	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
930	coor_chr = ADJUSTL( coor_chr )
931	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
932
933	i = i + 1
934	ENDDO
935	IF ( av == 0 ) THEN
936	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
937	TRIM( begin_chr ), 'i', TRIM( slices ), &
938	TRIM( coordinates )
939	IF ( skip_time_do2d_yz /= 0.0 ) THEN
940	WRITE ( io, 339 ) skip_time_do2d_yz
941	ENDIF
942	ELSE
943	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
944	TRIM( begin_chr ), averaging_interval, &
945	dt_averaging_input, 'i', TRIM( slices ), &
946	TRIM( coordinates )
947	IF ( skip_time_data_output_av /= 0.0 ) THEN
948	WRITE ( io, 339 ) skip_time_data_output_av
949	ENDIF
950	ENDIF
951	ENDIF
952
953	ENDIF
954
955	ENDDO
956
957	!
958	!-- 3d-arrays
959	DO av = 0, 1
960
961	i = 1
962	do3d_chr = ''
963	DO WHILE ( do3d(av,i) /= ' ' )
964
965	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
966	i = i + 1
967
968	ENDDO
969
970	IF ( do3d_chr /= '' ) THEN
971	IF ( av == 0 ) THEN
972	WRITE ( io, 336 ) ''
973	ELSE
974	WRITE ( io, 336 ) '(time-averaged)'
975	ENDIF
976
977	output_format = ''
978	IF ( netcdf_output ) THEN
979	IF ( netcdf_data_format == 1 ) THEN
980	output_format = 'NetCDF classic'
981	ELSEIF ( netcdf_data_format == 2 ) THEN
982	output_format = 'NetCDF 64bit offset'
983	ELSEIF ( netcdf_data_format == 3 ) THEN
984	output_format = 'NetCDF4/HDF5'
985	ELSEIF ( netcdf_data_format == 4 ) THEN
986	output_format = 'NetCDF4/HDF5 clasic'
987	ENDIF
988	ENDIF
989	IF ( avs_output ) THEN
990	IF ( netcdf_output ) THEN
991	output_format = TRIM( output_format ) // ' and avs'
992	ELSE
993	output_format = 'avs'
994	ENDIF
995	ENDIF
996	WRITE ( io, 344 ) output_format
997
998	IF ( do3d_at_begin ) THEN
999	begin_chr = 'and at the start'
1000	ELSE
1001	begin_chr = ''
1002	ENDIF
1003	IF ( av == 0 ) THEN
1004	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1005	zu(nz_do3d), nz_do3d
1006	ELSE
1007	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1008	TRIM( begin_chr ), averaging_interval, &
1009	dt_averaging_input, zu(nz_do3d), nz_do3d
1010	ENDIF
1011
1012	IF ( do3d_compress ) THEN
1013	do3d_chr = ''
1014	i = 1
1015	DO WHILE ( do3d(av,i) /= ' ' )
1016
1017	SELECT CASE ( do3d(av,i) )
1018	CASE ( 'u' )
1019	j = 1
1020	CASE ( 'v' )
1021	j = 2
1022	CASE ( 'w' )
1023	j = 3
1024	CASE ( 'p' )
1025	j = 4
1026	CASE ( 'pt' )
1027	j = 5
1028	END SELECT
1029	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1030	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1031	':' // prec // ','
1032	i = i + 1
1033
1034	ENDDO
1035	WRITE ( io, 338 ) do3d_chr
1036
1037	ENDIF
1038
1039	IF ( av == 0 ) THEN
1040	IF ( skip_time_do3d /= 0.0 ) THEN
1041	WRITE ( io, 339 ) skip_time_do3d
1042	ENDIF
1043	ELSE
1044	IF ( skip_time_data_output_av /= 0.0 ) THEN
1045	WRITE ( io, 339 ) skip_time_data_output_av
1046	ENDIF
1047	ENDIF
1048
1049	ENDIF
1050
1051	ENDDO
1052
1053	!
1054	!-- masked arrays
1055	IF ( masks > 0 ) WRITE ( io, 345 ) &
1056	mask_scale_x, mask_scale_y, mask_scale_z
1057	DO mid = 1, masks
1058	DO av = 0, 1
1059
1060	i = 1
1061	domask_chr = ''
1062	DO WHILE ( domask(mid,av,i) /= ' ' )
1063	domask_chr = TRIM( domask_chr ) // ' ' // &
1064	TRIM( domask(mid,av,i) ) // ','
1065	i = i + 1
1066	ENDDO
1067
1068	IF ( domask_chr /= '' ) THEN
1069	IF ( av == 0 ) THEN
1070	WRITE ( io, 346 ) '', mid
1071	ELSE
1072	WRITE ( io, 346 ) ' (time-averaged)', mid
1073	ENDIF
1074
1075	output_format = ''
1076	IF ( netcdf_output ) THEN
1077	IF ( netcdf_data_format == 1 ) THEN
1078	output_format = 'NetCDF classic'
1079	ELSEIF ( netcdf_data_format == 2 ) THEN
1080	output_format = 'NetCDF 64bit offset'
1081	ELSEIF ( netcdf_data_format == 3 ) THEN
1082	output_format = 'NetCDF4/HDF5'
1083	ELSEIF ( netcdf_data_format == 4 ) THEN
1084	output_format = 'NetCDF4/HDF5 clasic'
1085	ENDIF
1086	ENDIF
1087	WRITE ( io, 344 ) output_format
1088
1089	IF ( av == 0 ) THEN
1090	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1091	ELSE
1092	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1093	averaging_interval, dt_averaging_input
1094	ENDIF
1095
1096	IF ( av == 0 ) THEN
1097	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1098	WRITE ( io, 339 ) skip_time_domask(mid)
1099	ENDIF
1100	ELSE
1101	IF ( skip_time_data_output_av /= 0.0 ) THEN
1102	WRITE ( io, 339 ) skip_time_data_output_av
1103	ENDIF
1104	ENDIF
1105	!
1106	!-- output locations
1107	DO dim = 1, 3
1108	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1109	count = 0
1110	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1111	count = count + 1
1112	ENDDO
1113	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1114	mask(mid,dim,:count)
1115	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1116	mask_loop(mid,dim,2) < 0.0 .AND. &
1117	mask_loop(mid,dim,3) == 0.0 ) THEN
1118	WRITE ( io, 350 ) dir(dim), dir(dim)
1119	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1120	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1121	mask_loop(mid,dim,1:2)
1122	ELSE
1123	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1124	mask_loop(mid,dim,1:3)
1125	ENDIF
1126	ENDDO
1127	ENDIF
1128
1129	ENDDO
1130	ENDDO
1131
1132	!
1133	!-- Timeseries
1134	IF ( dt_dots /= 9999999.9 ) THEN
1135	WRITE ( io, 340 )
1136
1137	output_format = ''
1138	IF ( netcdf_output ) THEN
1139	IF ( netcdf_data_format == 1 ) THEN
1140	output_format = 'NetCDF classic'
1141	ELSE
1142	output_format = 'NetCDF 64bit offset'
1143	ENDIF
1144	ENDIF
1145	IF ( profil_output ) THEN
1146	IF ( netcdf_output ) THEN
1147	output_format = TRIM( output_format ) // ' and profil'
1148	ELSE
1149	output_format = 'profil'
1150	ENDIF
1151	ENDIF
1152	WRITE ( io, 344 ) output_format
1153	WRITE ( io, 341 ) dt_dots
1154	ENDIF
1155
1156	#if defined( __dvrp_graphics )
1157	!
1158	!-- Dvrp-output
1159	IF ( dt_dvrp /= 9999999.9 ) THEN
1160	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1161	TRIM( dvrp_username ), TRIM( dvrp_directory )
1162	i = 1
1163	l = 0
1164	m = 0
1165	DO WHILE ( mode_dvrp(i) /= ' ' )
1166	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1167	READ ( mode_dvrp(i), '(10X,I2)' ) j
1168	l = l + 1
1169	IF ( do3d(0,j) /= ' ' ) THEN
1170	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1171	isosurface_color(:,l)
1172	ENDIF
1173	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1174	READ ( mode_dvrp(i), '(6X,I2)' ) j
1175	m = m + 1
1176	IF ( do2d(0,j) /= ' ' ) THEN
1177	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1178	slicer_range_limits_dvrp(:,m)
1179	ENDIF
1180	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1181	WRITE ( io, 363 ) dvrp_psize
1182	IF ( particle_dvrpsize /= 'none' ) THEN
1183	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1184	dvrpsize_interval
1185	ENDIF
1186	IF ( particle_color /= 'none' ) THEN
1187	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1188	color_interval
1189	ENDIF
1190	ENDIF
1191	i = i + 1
1192	ENDDO
1193
1194	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1195	superelevation_y, superelevation, clip_dvrp_l, &
1196	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1197
1198	IF ( TRIM( topography ) /= 'flat' ) THEN
1199	WRITE ( io, 366 ) topography_color
1200	IF ( cluster_size > 1 ) THEN
1201	WRITE ( io, 367 ) cluster_size
1202	ENDIF
1203	ENDIF
1204
1205	ENDIF
1206	#endif
1207
1208	#if defined( __spectra )
1209	!
1210	!-- Spectra output
1211	IF ( dt_dosp /= 9999999.9 ) THEN
1212	WRITE ( io, 370 )
1213
1214	output_format = ''
1215	IF ( netcdf_output ) THEN
1216	IF ( netcdf_data_format == 1 ) THEN
1217	output_format = 'NetCDF classic'
1218	ELSE
1219	output_format = 'NetCDF 64bit offset'
1220	ENDIF
1221	ENDIF
1222	IF ( profil_output ) THEN
1223	IF ( netcdf_output ) THEN
1224	output_format = TRIM( output_format ) // ' and profil'
1225	ELSE
1226	output_format = 'profil'
1227	ENDIF
1228	ENDIF
1229	WRITE ( io, 344 ) output_format
1230	WRITE ( io, 371 ) dt_dosp
1231	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1232	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1233	( spectra_direction(i), i = 1,10 ), &
1234	( comp_spectra_level(i), i = 1,100 ), &
1235	( plot_spectra_level(i), i = 1,100 ), &
1236	averaging_interval_sp, dt_averaging_input_pr
1237	ENDIF
1238	#endif
1239
1240	WRITE ( io, 99 )
1241
1242	!
1243	!-- Physical quantities
1244	WRITE ( io, 400 )
1245
1246	!
1247	!-- Geostrophic parameters
1248	WRITE ( io, 410 ) omega, phi, f, fs
1249
1250	!
1251	!-- Other quantities
1252	WRITE ( io, 411 ) g
1253	IF ( use_reference ) THEN
1254	IF ( ocean ) THEN
1255	WRITE ( io, 412 ) prho_reference
1256	ELSE
1257	WRITE ( io, 413 ) pt_reference
1258	ENDIF
1259	ENDIF
1260
1261	!
1262	!-- Cloud physics parameters
1263	IF ( cloud_physics ) THEN
1264	WRITE ( io, 415 )
1265	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1266	ENDIF
1267
1268	!-- Profile of the geostrophic wind (component ug)
1269	!-- Building output strings
1270	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1271	gradients = '------'
1272	slices = ' 0'
1273	coordinates = ' 0.0'
1274	i = 1
1275	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1276
1277	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1278	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1279
1280	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1281	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1282
1283	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1284	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1285
1286	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1287	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1288
1289	IF ( i == 10 ) THEN
1290	EXIT
1291	ELSE
1292	i = i + 1
1293	ENDIF
1294
1295	ENDDO
1296
1297	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1298	TRIM( gradients ), TRIM( slices )
1299
1300	!-- Profile of the geostrophic wind (component vg)
1301	!-- Building output strings
1302	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1303	gradients = '------'
1304	slices = ' 0'
1305	coordinates = ' 0.0'
1306	i = 1
1307	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1308
1309	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1310	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1311
1312	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1313	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1314
1315	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1316	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1317
1318	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1319	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1320
1321	IF ( i == 10 ) THEN
1322	EXIT
1323	ELSE
1324	i = i + 1
1325	ENDIF
1326
1327	ENDDO
1328
1329	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1330	TRIM( gradients ), TRIM( slices )
1331
1332	!
1333	!-- Initial wind profiles
1334	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1335
1336	!
1337	!-- Initial temperature profile
1338	!-- Building output strings, starting with surface temperature
1339	WRITE ( temperatures, '(F6.2)' ) pt_surface
1340	gradients = '------'
1341	slices = ' 0'
1342	coordinates = ' 0.0'
1343	i = 1
1344	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1345
1346	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1347	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1348
1349	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1350	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1351
1352	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1353	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1354
1355	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1356	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1357
1358	IF ( i == 10 ) THEN
1359	EXIT
1360	ELSE
1361	i = i + 1
1362	ENDIF
1363
1364	ENDDO
1365
1366	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1367	TRIM( gradients ), TRIM( slices )
1368
1369	!
1370	!-- Initial humidity profile
1371	!-- Building output strings, starting with surface humidity
1372	IF ( humidity .OR. passive_scalar ) THEN
1373	WRITE ( temperatures, '(E8.1)' ) q_surface
1374	gradients = '--------'
1375	slices = ' 0'
1376	coordinates = ' 0.0'
1377	i = 1
1378	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1379
1380	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1381	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1382
1383	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1384	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1385
1386	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1387	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1388
1389	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1390	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1391
1392	IF ( i == 10 ) THEN
1393	EXIT
1394	ELSE
1395	i = i + 1
1396	ENDIF
1397
1398	ENDDO
1399
1400	IF ( humidity ) THEN
1401	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1402	TRIM( gradients ), TRIM( slices )
1403	ELSE
1404	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1405	TRIM( gradients ), TRIM( slices )
1406	ENDIF
1407	ENDIF
1408
1409	!
1410	!-- Initial salinity profile
1411	!-- Building output strings, starting with surface salinity
1412	IF ( ocean ) THEN
1413	WRITE ( temperatures, '(F6.2)' ) sa_surface
1414	gradients = '------'
1415	slices = ' 0'
1416	coordinates = ' 0.0'
1417	i = 1
1418	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1419
1420	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1421	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1422
1423	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1424	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1425
1426	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1427	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1428
1429	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1430	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1431
1432	IF ( i == 10 ) THEN
1433	EXIT
1434	ELSE
1435	i = i + 1
1436	ENDIF
1437
1438	ENDDO
1439
1440	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1441	TRIM( gradients ), TRIM( slices )
1442	ENDIF
1443
1444	!
1445	!-- Profile for the large scale vertial velocity
1446	!-- Building output strings, starting with surface value
1447	IF ( large_scale_subsidence ) THEN
1448	temperatures = ' 0.0'
1449	gradients = '------'
1450	slices = ' 0'
1451	coordinates = ' 0.0'
1452	i = 1
1453	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1454
1455	WRITE (coor_chr,'(E10.2,7X)') &
1456	w_subs(subs_vertical_gradient_level_i(i))
1457	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1458
1459	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1460	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1461
1462	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1463	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1464
1465	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1466	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1467
1468	IF ( i == 10 ) THEN
1469	EXIT
1470	ELSE
1471	i = i + 1
1472	ENDIF
1473
1474	ENDDO
1475
1476	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1477	TRIM( gradients ), TRIM( slices )
1478	ENDIF
1479
1480	!
1481	!-- Cloud physcis parameters / quantities / numerical methods
1482	WRITE ( io, 430 )
1483	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1484	WRITE ( io, 431 )
1485	ELSEIF ( humidity .AND. cloud_physics ) THEN
1486	WRITE ( io, 432 )
1487	IF ( radiation ) WRITE ( io, 132 )
1488	IF ( precipitation ) WRITE ( io, 133 )
1489	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1490	WRITE ( io, 433 )
1491	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1492	IF ( collision_kernel /= 'none' ) THEN
1493	WRITE ( io, 435 ) TRIM( collision_kernel )
1494	IF ( collision_kernel(6:9) == 'fast' ) THEN
1495	WRITE ( io, 436 ) radius_classes, dissipation_classes
1496	ENDIF
1497	ELSE
1498	WRITE ( io, 437 )
1499	ENDIF
1500	ENDIF
1501
1502	!
1503	!-- LES / turbulence parameters
1504	WRITE ( io, 450 )
1505
1506	!--
1507	! ... LES-constants used must still be added here
1508	!--
1509	IF ( constant_diffusion ) THEN
1510	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1511	prandtl_number
1512	ENDIF
1513	IF ( .NOT. constant_diffusion) THEN
1514	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1515	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1516	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1517	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1518	ENDIF
1519
1520	!
1521	!-- Special actions during the run
1522	WRITE ( io, 470 )
1523	IF ( create_disturbances ) THEN
1524	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1525	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1526	zu(disturbance_level_ind_t), disturbance_level_ind_t
1527	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1528	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1529	ELSE
1530	WRITE ( io, 473 ) disturbance_energy_limit
1531	ENDIF
1532	WRITE ( io, 474 ) TRIM( random_generator )
1533	ENDIF
1534	IF ( pt_surface_initial_change /= 0.0 ) THEN
1535	WRITE ( io, 475 ) pt_surface_initial_change
1536	ENDIF
1537	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1538	WRITE ( io, 476 ) q_surface_initial_change
1539	ENDIF
1540	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1541	WRITE ( io, 477 ) q_surface_initial_change
1542	ENDIF
1543
1544	IF ( particle_advection ) THEN
1545	!
1546	!-- Particle attributes
1547	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1548	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1549	end_time_prel, dt_sort_particles
1550	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1551	IF ( random_start_position ) WRITE ( io, 481 )
1552	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1553	WRITE ( io, 495 ) total_number_of_particles
1554	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1555	WRITE ( io, 483 ) maximum_number_of_tailpoints
1556	IF ( minimum_tailpoint_distance /= 0 ) THEN
1557	WRITE ( io, 484 ) total_number_of_tails, &
1558	minimum_tailpoint_distance, &
1559	maximum_tailpoint_age
1560	ENDIF
1561	ENDIF
1562	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1563	WRITE ( io, 485 ) dt_write_particle_data
1564	output_format = ''
1565	IF ( netcdf_output ) THEN
1566	IF ( netcdf_data_format > 1 ) THEN
1567	output_format = 'netcdf (64 bit offset) and binary'
1568	ELSE
1569	output_format = 'netcdf and binary'
1570	ENDIF
1571	ELSE
1572	output_format = 'binary'
1573	ENDIF
1574	WRITE ( io, 344 ) output_format
1575	ENDIF
1576	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1577	IF ( write_particle_statistics ) WRITE ( io, 486 )
1578
1579	WRITE ( io, 487 ) number_of_particle_groups
1580
1581	DO i = 1, number_of_particle_groups
1582	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1583	WRITE ( io, 490 ) i, 0.0
1584	WRITE ( io, 492 )
1585	ELSE
1586	WRITE ( io, 490 ) i, radius(i)
1587	IF ( density_ratio(i) /= 0.0 ) THEN
1588	WRITE ( io, 491 ) density_ratio(i)
1589	ELSE
1590	WRITE ( io, 492 )
1591	ENDIF
1592	ENDIF
1593	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1594	pdx(i), pdy(i), pdz(i)
1595	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1596	ENDDO
1597
1598	ENDIF
1599
1600
1601	!
1602	!-- Parameters of 1D-model
1603	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1604	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1605	mixing_length_1d, dissipation_1d
1606	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1607	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1608	ENDIF
1609	ENDIF
1610
1611	!
1612	!-- User-defined informations
1613	CALL user_header( io )
1614
1615	WRITE ( io, 99 )
1616
1617	!
1618	!-- Write buffer contents to disc immediately
1619	CALL local_flush( io )
1620
1621	!
1622	!-- Here the FORMATs start
1623
1624	99 FORMAT (1X,78('-'))
1625	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1626	1X,'* ',A,' *',9X,A/ &
1627	1X,'***************************',9X,42('-'))
1628	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1629	37X,42('-'))
1630	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1631	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1632	' Run on host: ',A10)
1633	#if defined( __parallel )
1634	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1635	')',1X,A)
1636	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1637	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1638	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1639	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1640	37X,'because the job is running on an SMP-cluster')
1641	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1642	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1643	#endif
1644	110 FORMAT (/' Numerical Schemes:'/ &
1645	' -----------------'/)
1646	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1647	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1648	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1649	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1650	' or Upstream')
1651	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1652	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1653	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1654	' or Upstream')
1655	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1656	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1657	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1658	' Translation velocity = ',A/ &
1659	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1660	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1661	' of timestep changes)')
1662	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1663	' timestep changes')
1664	122 FORMAT (' --> Time differencing scheme: ',A)
1665	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1666	' maximum damping coefficient: ',F5.3, ' 1/s')
1667	124 FORMAT (' Spline-overshoots are being suppressed')
1668	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1669	' of'/ &
1670	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1671	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1672	' of'/ &
1673	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1674	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1675	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1676	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1677	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1678	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1679	130 FORMAT (' --> Additional prognostic equation for the total water content')
1680	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1681	' effective emissivity scheme')
1682	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1683	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1684	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1685	A,'-cycle)'/ &
1686	' number of grid levels: ',I2/ &
1687	' Gauss-Seidel red/black iterations: ',I2)
1688	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1689	I3,')')
1690	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1691	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1692	I3,')'/ &
1693	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1694	I3,')')
1695	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1696	139 FORMAT (' --> Loop optimization method: ',A)
1697	140 FORMAT (' maximum residual allowed: ',E10.3)
1698	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1699	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1700	'step')
1701	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1702	'kinetic energy')
1703	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1704	'conserved'/ &
1705	' using the ',A,' mode')
1706	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1707	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1708	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1709	/' starting from dp_level_b =', F8.3, 'm', A /)
1710	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1711	'prognostic equation for')
1712	154 FORMAT (' the potential temperature')
1713	200 FORMAT (//' Run time and time step information:'/ &
1714	' ----------------------------------'/)
1715	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1716	' CFL-factor: ',F4.2)
1717	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1718	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1719	' End time: ',F9.3,' s')
1720	204 FORMAT ( A,F9.3,' s')
1721	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1722	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1723	' CPU-time used: ',F9.3,' s per timestep: ', &
1724	' ',F9.3,' s'/ &
1725	' per second of simulated tim', &
1726	'e: ',F9.3,' s')
1727	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1728	250 FORMAT (//' Computational grid and domain size:'/ &
1729	' ----------------------------------'// &
1730	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1731	' m dz = ',F7.3,' m'/ &
1732	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1733	' m z(u) = ',F10.3,' m'/)
1734	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1735	' factor: ',F5.3/ &
1736	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1737	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1738	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1739	255 FORMAT (' Subdomains have equal size')
1740	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1741	'have smaller sizes'/ &
1742	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1743	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1744	' degrees')
1745	270 FORMAT (//' Topography informations:'/ &
1746	' -----------------------'// &
1747	1X,'Topography: ',A)
1748	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1749	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1750	' / ',I4)
1751	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1752	' direction' / &
1753	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1754	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1755	278 FORMAT (' Topography grid definition convention:'/ &
1756	' cell edge (staggered grid points'/ &
1757	' (u in x-direction, v in y-direction))' /)
1758	279 FORMAT (' Topography grid definition convention:'/ &
1759	' cell center (scalar grid points)' /)
1760	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1761	' ------------------------------'// &
1762	' Canopy mode: ', A / &
1763	' Canopy top: ',I4 / &
1764	' Leaf drag coefficient: ',F6.2 /)
1765	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1766	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1767	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1768	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1769	' Height: ',A,' m'/ &
1770	' Leaf area density: ',A,' m2/m3'/ &
1771	' Gradient: ',A,' m2/m4'/ &
1772	' Gridpoint: ',A)
1773
1774	300 FORMAT (//' Boundary conditions:'/ &
1775	' -------------------'// &
1776	' p uv ', &
1777	' pt'// &
1778	' B. bound.: ',A/ &
1779	' T. bound.: ',A)
1780	301 FORMAT (/' ',A// &
1781	' B. bound.: ',A/ &
1782	' T. bound.: ',A)
1783	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1784	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1785	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1786	'computational u,v-level:'// &
1787	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1788	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1789	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1790	307 FORMAT (' Heatflux has a random normal distribution')
1791	308 FORMAT (' Predefined surface temperature')
1792	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1793	310 FORMAT (//' 1D-Model:'// &
1794	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1795	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1796	312 FORMAT (' Predefined surface humidity')
1797	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1798	314 FORMAT (' Predefined scalar value at the surface')
1799	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1800	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1801	'atmosphere model')
1802	317 FORMAT (//' Lateral boundaries:'/ &
1803	' left/right: ',A/ &
1804	' north/south: ',A)
1805	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1806	'max =',F5.1,' m**2/s')
1807	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1808	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1809	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1810	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1811	' v: ',F9.6,' m2/s2')
1812	325 FORMAT (//' List output:'/ &
1813	' -----------'// &
1814	' 1D-Profiles:'/ &
1815	' Output every ',F8.2,' s')
1816	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1817	' Averaging input every ',F8.2,' s')
1818	330 FORMAT (//' Data output:'/ &
1819	' -----------'/)
1820	331 FORMAT (/' 1D-Profiles:')
1821	332 FORMAT (/' ',A)
1822	333 FORMAT (' Output every ',F8.2,' s',/ &
1823	' Time averaged over ',F8.2,' s'/ &
1824	' Averaging input every ',F8.2,' s')
1825	334 FORMAT (/' 2D-Arrays',A,':')
1826	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1827	' Output every ',F8.2,' s ',A/ &
1828	' Cross sections at ',A1,' = ',A/ &
1829	' scalar-coordinates: ',A,' m'/)
1830	336 FORMAT (/' 3D-Arrays',A,':')
1831	337 FORMAT (/' Arrays: ',A/ &
1832	' Output every ',F8.2,' s ',A/ &
1833	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1834	338 FORMAT (' Compressed data output'/ &
1835	' Decimal precision: ',A/)
1836	339 FORMAT (' No output during initial ',F8.2,' s')
1837	340 FORMAT (/' Time series:')
1838	341 FORMAT (' Output every ',F8.2,' s'/)
1839	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1840	' Output every ',F8.2,' s ',A/ &
1841	' Time averaged over ',F8.2,' s'/ &
1842	' Averaging input every ',F8.2,' s'/ &
1843	' Cross sections at ',A1,' = ',A/ &
1844	' scalar-coordinates: ',A,' m'/)
1845	343 FORMAT (/' Arrays: ',A/ &
1846	' Output every ',F8.2,' s ',A/ &
1847	' Time averaged over ',F8.2,' s'/ &
1848	' Averaging input every ',F8.2,' s'/ &
1849	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1850	344 FORMAT (' Output format: ',A/)
1851	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1852	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1853	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1854	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1855	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1856	347 FORMAT (' Variables: ',A/ &
1857	' Output every ',F8.2,' s')
1858	348 FORMAT (' Variables: ',A/ &
1859	' Output every ',F8.2,' s'/ &
1860	' Time averaged over ',F8.2,' s'/ &
1861	' Averaging input every ',F8.2,' s')
1862	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1863	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1864	13(' ',8(F8.2,',')/) )
1865	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1866	'all gridpoints along ',A,'-direction (default).' )
1867	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1868	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1869	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1870	#if defined( __dvrp_graphics )
1871	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1872	' Output every ',F7.1,' s'/ &
1873	' Output mode: ',A/ &
1874	' Host / User: ',A,' / ',A/ &
1875	' Directory: ',A// &
1876	' The sequence contains:')
1877	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1878	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1879	362 FORMAT (/' Slicer plane ',A/ &
1880	' Slicer limits: [',F6.2,',',F6.2,']')
1881	363 FORMAT (/' Particles'/ &
1882	' particle size: ',F7.2,' m')
1883	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1884	F6.2,',',F6.2,']')
1885	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1886	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1887	')'/ &
1888	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1889	' from y = ',F9.1,' m to y = ',F9.1,' m')
1890	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1891	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1892	#endif
1893	#if defined( __spectra )
1894	370 FORMAT (' Spectra:')
1895	371 FORMAT (' Output every ',F7.1,' s'/)
1896	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1897	' Directions: ', 10(A5,',')/ &
1898	' height levels k = ', 20(I3,',')/ &
1899	' ', 20(I3,',')/ &
1900	' ', 20(I3,',')/ &
1901	' ', 20(I3,',')/ &
1902	' ', 19(I3,','),I3,'.'/ &
1903	' height levels selected for standard plot:'/ &
1904	' k = ', 20(I3,',')/ &
1905	' ', 20(I3,',')/ &
1906	' ', 20(I3,',')/ &
1907	' ', 20(I3,',')/ &
1908	' ', 19(I3,','),I3,'.'/ &
1909	' Time averaged over ', F7.1, ' s,' / &
1910	' Profiles for the time averaging are taken every ', &
1911	F6.1,' s')
1912	#endif
1913	400 FORMAT (//' Physical quantities:'/ &
1914	' -------------------'/)
1915	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1916	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1917	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1918	' f* = ',F9.6,' 1/s')
1919	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1920	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1921	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1922	415 FORMAT (/' Cloud physics parameters:'/ &
1923	' ------------------------'/)
1924	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1925	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1926	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1927	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1928	' Vapourization heat : L_v = ',E8.2,' J/kg')
1929	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1930	' Height: ',A,' m'/ &
1931	' Temperature: ',A,' K'/ &
1932	' Gradient: ',A,' K/100m'/ &
1933	' Gridpoint: ',A)
1934	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1935	' Height: ',A,' m'/ &
1936	' Humidity: ',A,' kg/kg'/ &
1937	' Gradient: ',A,' (kg/kg)/100m'/ &
1938	' Gridpoint: ',A)
1939	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1940	' Height: ',A,' m'/ &
1941	' Scalar concentration: ',A,' kg/m**3'/ &
1942	' Gradient: ',A,' (kg/m**3)/100m'/ &
1943	' Gridpoint: ',A)
1944	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1945	' Height: ',A,' m'/ &
1946	' ug: ',A,' m/s'/ &
1947	' Gradient: ',A,' 1/100s'/ &
1948	' Gridpoint: ',A)
1949	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1950	' Height: ',A,' m'/ &
1951	' vg: ',A,' m/s'/ &
1952	' Gradient: ',A,' 1/100s'/ &
1953	' Gridpoint: ',A)
1954	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1955	' Height: ',A,' m'/ &
1956	' Salinity: ',A,' psu'/ &
1957	' Gradient: ',A,' psu/100m'/ &
1958	' Gridpoint: ',A)
1959	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1960	' Height: ',A,' m'/ &
1961	' w_subs: ',A,' m/s'/ &
1962	' Gradient: ',A,' (m/s)/100m'/ &
1963	' Gridpoint: ',A)
1964	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1965	' profiles')
1966	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1967	' ----------------------------------'/)
1968	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1969	'on)')
1970	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1971	' total water content is used.'/ &
1972	' Condensation is parameterized via 0% - or 100% scheme.')
1973	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1974	'icle model')
1975	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1976	' droplets < 1.0E-6 m')
1977	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1978	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1979	'are used'/ &
1980	' number of radius classes: ',I3,' interval ', &
1981	'[1.0E-6,2.0E-4] m'/ &
1982	' number of dissipation classes: ',I2,' interval ', &
1983	'[0,1000] cm2/s3')
1984	437 FORMAT (' Droplet collision is switched off')
1985	450 FORMAT (//' LES / Turbulence quantities:'/ &
1986	' ---------------------------'/)
1987	451 FORMAT (' Diffusion coefficients are constant:'/ &
1988	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1989	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1990	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1991	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1992	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1993	470 FORMAT (//' Actions during the simulation:'/ &
1994	' -----------------------------'/)
1995	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1996	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1997	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1998	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1999	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
2000	' to i/j =',I4)
2001	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
2002	1X,F5.3, ' m2/s2')
2003	474 FORMAT (' Random number generator used : ',A/)
2004	475 FORMAT (' The surface temperature is increased (or decreased, ', &
2005	'respectively, if'/ &
2006	' the value is negative) by ',F5.2,' K at the beginning of the',&
2007	' 3D-simulation'/)
2008	476 FORMAT (' The surface humidity is increased (or decreased, ',&
2009	'respectively, if the'/ &
2010	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
2011	' the 3D-simulation'/)
2012	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
2013	'respectively, if the'/ &
2014	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
2015	' the 3D-simulation'/)
2016	480 FORMAT (' Particles:'/ &
2017	' ---------'// &
2018	' Particle advection is active (switched on at t = ', F7.1, &
2019	' s)'/ &
2020	' Start of new particle generations every ',F6.1,' s'/ &
2021	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
2022	' bottom: ', A, ' top: ', A/&
2023	' Maximum particle age: ',F9.1,' s'/ &
2024	' Advection stopped at t = ',F9.1,' s'/ &
2025	' Particles are sorted every ',F9.1,' s'/)
2026	481 FORMAT (' Particles have random start positions'/)
2027	482 FORMAT (' Particles are advected only horizontally'/)
2028	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2029	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2030	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2031	' Maximum age of the end of the tail: ',F8.2,' s')
2032	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2033	486 FORMAT (' Particle statistics are written on file'/)
2034	487 FORMAT (' Number of particle groups: ',I2/)
2035	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2036	' minimum timestep for advection: ', F7.5/)
2037	489 FORMAT (' Number of particles simultaneously released at each ', &
2038	'point: ', I5/)
2039	490 FORMAT (' Particle group ',I2,':'/ &
2040	' Particle radius: ',E10.3, 'm')
2041	491 FORMAT (' Particle inertia is activated'/ &
2042	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2043	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2044	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2045	' y:',F8.1,' - ',F8.1,' m'/&
2046	' z:',F8.1,' - ',F8.1,' m'/&
2047	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2048	' m dz = ',F8.1,' m'/)
2049	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2050	F8.2,' s'/)
2051	495 FORMAT (' Number of particles in total domain: ',I10/)
2052	500 FORMAT (//' 1D-Model parameters:'/ &
2053	' -------------------'// &
2054	' Simulation time: ',F8.1,' s'/ &
2055	' Run-controll output every: ',F8.1,' s'/ &
2056	' Vertical profile output every: ',F8.1,' s'/ &
2057	' Mixing length calculation: ',A/ &
2058	' Dissipation calculation: ',A/)
2059	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2060	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2061	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2062
2063
2064	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |