Home

Context Navigation

header.f90 @ 91

Last change on this file since 91 was 90, checked in by raasch, 17 years ago

New:
---
Calculation and output of user-defined profiles. New &userpar parameters data_output_pr_user and max_pr_user.

check_parameters, flow_statistics, modules, parin, read_var_list, user_interface, write_var_list

Changed:

Division through dt_3d replaced by multiplication of the inverse. For performance optimisation, this is done in the loop calculating the divergence instead of using a seperate loop. (pres.f90) var_hom and var_sum renamed pr_palm.

data_output_profiles, flow_statistics, init_3d_model, modules, parin, pres, read_var_list, run_control, time_integration

Errors:

Bugfix: work_fft*_vec removed from some PRIVATE-declarations (poisfft).

Bugfix: field_chr renamed field_char (user_interface).

Bugfix: output of use_upstream_for_tke (header).

header, poisfft, user_interface

Property svn:keywords set to Id

File size: 55.2 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 90 2007-05-30 09:18:47Z raasch $
11	!
12	! 87 2007-05-22 15:46:47Z raasch
13	! Bugfix: output of use_upstream_for_tke
14	!
15	! 82 2007-04-16 15:40:52Z raasch
16	! Preprocessor strings for different linux clusters changed to "lc",
17	! routine local_flush is used for buffer flushing
18	!
19	! 76 2007-03-29 00:58:32Z raasch
20	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
21	! output of the loop optimization method, moisture renamed humidity,
22	! output of subversion revision number
23	!
24	! 19 2007-02-23 04:53:48Z raasch
25	! Output of scalar flux applied at top boundary
26	!
27	! RCS Log replace by Id keyword, revision history cleaned up
28	!
29	! Revision 1.63 2006/08/22 13:53:13 raasch
30	! Output of dz_max
31	!
32	! Revision 1.1 1997/08/11 06:17:20 raasch
33	! Initial revision
34	!
35	!
36	! Description:
37	! ------------
38	! Writing a header with all important informations about the actual run.
39	! This subroutine is called three times, two times at the beginning
40	! (writing information on files RUN_CONTROL and HEADER) and one time at the
41	! end of the run, then writing additional information about CPU-usage on file
42	! header.
43	!------------------------------------------------------------------------------!
44
45	USE arrays_3d
46	USE control_parameters
47	USE cloud_parameters
48	USE cpulog
49	USE dvrp_variables
50	USE grid_variables
51	USE indices
52	USE model_1d
53	USE particle_attributes
54	USE pegrid
55	USE spectrum
56
57	IMPLICIT NONE
58
59	CHARACTER (LEN=1) :: prec
60	CHARACTER (LEN=2) :: do2d_mode
61	CHARACTER (LEN=5) :: section_chr
62	CHARACTER (LEN=9) :: time_to_string
63	CHARACTER (LEN=10) :: coor_chr, host_chr
64	CHARACTER (LEN=16) :: begin_chr
65	CHARACTER (LEN=21) :: ver_rev
66	CHARACTER (LEN=40) :: output_format
67	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
68	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
69	run_classification, slices, temperatures, &
70	ugcomponent, vgcomponent
71	CHARACTER (LEN=85) :: roben, runten
72
73	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
74	REAL :: cpuseconds_per_simulated_second
75
76	!
77	!-- Open the output file. At the end of the simulation, output is directed
78	!-- to unit 19.
79	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
80	.NOT. simulated_time_at_begin /= simulated_time ) THEN
81	io = 15 ! header output on file RUN_CONTROL
82	ELSE
83	io = 19 ! header output on file HEADER
84	ENDIF
85	CALL check_open( io )
86
87	!
88	!-- At the end of the run, output file (HEADER) will be rewritten with
89	!-- new informations
90	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
91
92	!
93	!-- Determine kind of model run
94	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
95	run_classification = '3D - restart run'
96	ELSE
97	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
98	run_classification = '3D - run without 1D - prerun'
99	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
100	run_classification = '3D - run with 1D - prerun'
101	ELSE
102	PRINT*,'+++ header: unknown action(s): ',initializing_actions
103	ENDIF
104	ENDIF
105
106	!
107	!-- Run-identification, date, time, host
108	host_chr = host(1:10)
109	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
110	WRITE ( io, 100 ) ver_rev, TRIM( run_classification ), run_date, &
111	run_identifier, run_time, runnr, ADJUSTR( host_chr )
112	#if defined( __parallel )
113	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
114	char1 = 'calculated'
115	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
116	host(1:2) == 'lc' ) .AND. &
117	npex == -1 .AND. pdims(2) == 1 ) THEN
118	char1 = 'forced'
119	ELSE
120	char1 = 'predefined'
121	ENDIF
122	IF ( threads_per_task == 1 ) THEN
123	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
124	ELSE
125	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
126	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
127	ENDIF
128	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
129	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
130	npex == -1 .AND. pdims(2) == 1 ) &
131	THEN
132	WRITE ( io, 104 )
133	ELSEIF ( pdims(2) == 1 ) THEN
134	WRITE ( io, 105 ) 'x'
135	ELSEIF ( pdims(1) == 1 ) THEN
136	WRITE ( io, 105 ) 'y'
137	ENDIF
138	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
139	#endif
140	WRITE ( io, 99 )
141
142	!
143	!-- Numerical schemes
144	WRITE ( io, 110 )
145	IF ( psolver(1:7) == 'poisfft' ) THEN
146	WRITE ( io, 111 ) TRIM( fft_method )
147	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
148	ELSEIF ( psolver == 'sor' ) THEN
149	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
150	ELSEIF ( psolver == 'multigrid' ) THEN
151	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
152	IF ( mg_cycles == -1 ) THEN
153	WRITE ( io, 140 ) residual_limit
154	ELSE
155	WRITE ( io, 141 ) mg_cycles
156	ENDIF
157	IF ( mg_switch_to_pe0_level == 0 ) THEN
158	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
159	nzt_mg(1)
160	ELSE
161	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
162	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
163	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
164	nzt_mg(mg_switch_to_pe0_level), &
165	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
166	nzt_mg(1)
167	ENDIF
168	ENDIF
169	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
170	THEN
171	WRITE ( io, 142 )
172	ENDIF
173
174	IF ( momentum_advec == 'pw-scheme' ) THEN
175	WRITE ( io, 113 )
176	ELSE
177	WRITE ( io, 114 )
178	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
179	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
180	overshoot_limit_w /= 0.0 ) THEN
181	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
182	overshoot_limit_w
183	ENDIF
184	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
185	ups_limit_w /= 0.0 ) &
186	THEN
187	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
188	ENDIF
189	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
190	ENDIF
191	IF ( scalar_advec == 'pw-scheme' ) THEN
192	WRITE ( io, 116 )
193	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
194	WRITE ( io, 117 )
195	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
196	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
197	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
198	ENDIF
199	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
200	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
201	ENDIF
202	ELSE
203	WRITE ( io, 118 )
204	ENDIF
205
206	WRITE ( io, 139 ) TRIM( loop_optimization )
207
208	IF ( galilei_transformation ) THEN
209	IF ( use_ug_for_galilei_tr ) THEN
210	char1 = 'geostrophic wind'
211	ELSE
212	char1 = 'mean wind in model domain'
213	ENDIF
214	IF ( simulated_time_at_begin == simulated_time ) THEN
215	char2 = 'at the start of the run'
216	ELSE
217	char2 = 'at the end of the run'
218	ENDIF
219	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
220	advected_distance_x/1000.0, advected_distance_y/1000.0
221	ENDIF
222	IF ( timestep_scheme == 'leapfrog' ) THEN
223	WRITE ( io, 120 )
224	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
225	WRITE ( io, 121 )
226	ELSE
227	WRITE ( io, 122 ) timestep_scheme
228	ENDIF
229	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
230	IF ( rayleigh_damping_factor /= 0.0 ) THEN
231	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
232	ENDIF
233	IF ( humidity ) THEN
234	IF ( .NOT. cloud_physics ) THEN
235	WRITE ( io, 129 )
236	ELSE
237	WRITE ( io, 130 )
238	WRITE ( io, 131 )
239	IF ( radiation ) WRITE ( io, 132 )
240	IF ( precipitation ) WRITE ( io, 133 )
241	ENDIF
242	ENDIF
243	IF ( passive_scalar ) WRITE ( io, 134 )
244	IF ( conserve_volume_flow ) WRITE ( io, 150 )
245	WRITE ( io, 99 )
246
247	!
248	!-- Runtime and timestep informations
249	WRITE ( io, 200 )
250	IF ( .NOT. dt_fixed ) THEN
251	WRITE ( io, 201 ) dt_max, cfl_factor
252	ELSE
253	WRITE ( io, 202 ) dt
254	ENDIF
255	WRITE ( io, 203 ) simulated_time_at_begin, end_time
256
257	IF ( time_restart /= 9999999.9 .AND. &
258	simulated_time_at_begin == simulated_time ) THEN
259	IF ( dt_restart == 9999999.9 ) THEN
260	WRITE ( io, 204 ) ' Restart at: ',time_restart
261	ELSE
262	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
263	ENDIF
264	ENDIF
265
266	IF ( simulated_time_at_begin /= simulated_time ) THEN
267	i = MAX ( log_point_s(10)%counts, 1 )
268	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
269	cpuseconds_per_simulated_second = 0.0
270	ELSE
271	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
272	( simulated_time - &
273	simulated_time_at_begin )
274	ENDIF
275	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
276	log_point_s(10)%sum / REAL( i ), &
277	cpuseconds_per_simulated_second
278	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
279	IF ( dt_restart == 9999999.9 ) THEN
280	WRITE ( io, 204 ) ' Next restart at: ',time_restart
281	ELSE
282	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
283	ENDIF
284	ENDIF
285	ENDIF
286
287	!
288	!-- Computational grid
289	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
290	IF ( dz_stretch_level_index < nzt+1 ) THEN
291	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
292	dz_stretch_factor, dz_max
293	ENDIF
294	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
295	MIN( nnz+2, nzt+2 )
296	IF ( numprocs > 1 ) THEN
297	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
298	WRITE ( io, 255 )
299	ELSE
300	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
301	ENDIF
302	ENDIF
303	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
304
305	!
306	!-- Topography
307	WRITE ( io, 270 ) topography
308	SELECT CASE ( TRIM( topography ) )
309
310	CASE ( 'flat' )
311	! no actions necessary
312
313	CASE ( 'single_building' )
314	blx = INT( building_length_x / dx )
315	bly = INT( building_length_y / dy )
316	bh = INT( building_height / dz )
317
318	IF ( building_wall_left == 9999999.9 ) THEN
319	building_wall_left = ( nx + 1 - blx ) / 2 * dx
320	ENDIF
321	bxl = INT ( building_wall_left / dx + 0.5 )
322	bxr = bxl + blx
323
324	IF ( building_wall_south == 9999999.9 ) THEN
325	building_wall_south = ( ny + 1 - bly ) / 2 * dy
326	ENDIF
327	bys = INT ( building_wall_south / dy + 0.5 )
328	byn = bys + bly
329
330	WRITE ( io, 271 ) building_length_x, building_length_y, &
331	building_height, bxl, bxr, bys, byn
332
333	END SELECT
334
335	!
336	!-- Boundary conditions
337	IF ( ibc_p_b == 0 ) THEN
338	runten = 'p(0) = 0 \|'
339	ELSEIF ( ibc_p_b == 1 ) THEN
340	runten = 'p(0) = p(1) \|'
341	ELSE
342	runten = 'p(0) = p(1) +R\|'
343	ENDIF
344	IF ( ibc_p_t == 0 ) THEN
345	roben = 'p(nzt+1) = 0 \|'
346	ELSE
347	roben = 'p(nzt+1) = p(nzt) \|'
348	ENDIF
349
350	IF ( ibc_uv_b == 0 ) THEN
351	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
352	ELSE
353	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
354	ENDIF
355	IF ( ibc_uv_t == 0 ) THEN
356	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
357	ELSE
358	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
359	ENDIF
360
361	IF ( ibc_pt_b == 0 ) THEN
362	runten = TRIM( runten ) // ' pt(0) = pt_surface'
363	ELSE
364	runten = TRIM( runten ) // ' pt(0) = pt(1)'
365	ENDIF
366	IF ( ibc_pt_t == 0 ) THEN
367	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
368	ELSEIF( ibc_pt_t == 1 ) THEN
369	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
370	ELSEIF( ibc_pt_t == 2 ) THEN
371	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
372	ENDIF
373
374	WRITE ( io, 300 ) runten, roben
375
376	IF ( .NOT. constant_diffusion ) THEN
377	IF ( ibc_e_b == 1 ) THEN
378	runten = 'e(0) = e(1)'
379	ELSE
380	runten = 'e(0) = e(1) = (u/0.1)*2'
381	ENDIF
382	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
383
384	WRITE ( io, 301 ) runten, roben
385
386	ENDIF
387
388	IF ( humidity .OR. passive_scalar ) THEN
389	IF ( humidity ) THEN
390	IF ( ibc_q_b == 0 ) THEN
391	runten = 'q(0) = q_surface'
392	ELSE
393	runten = 'q(0) = q(1)'
394	ENDIF
395	IF ( ibc_q_t == 0 ) THEN
396	roben = 'q(nzt) = q_top'
397	ELSE
398	roben = 'q(nzt) = q(nzt-1) + dq/dz'
399	ENDIF
400	ELSE
401	IF ( ibc_q_b == 0 ) THEN
402	runten = 's(0) = s_surface'
403	ELSE
404	runten = 's(0) = s(1)'
405	ENDIF
406	IF ( ibc_q_t == 0 ) THEN
407	roben = 's(nzt) = s_top'
408	ELSE
409	roben = 's(nzt) = s(nzt-1) + ds/dz'
410	ENDIF
411	ENDIF
412
413	WRITE ( io, 302 ) runten, roben
414
415	ENDIF
416
417	IF ( use_surface_fluxes ) THEN
418	WRITE ( io, 303 )
419	IF ( constant_heatflux ) THEN
420	WRITE ( io, 306 ) surface_heatflux
421	IF ( random_heatflux ) WRITE ( io, 307 )
422	ENDIF
423	IF ( humidity .AND. constant_waterflux ) THEN
424	WRITE ( io, 311 ) surface_waterflux
425	ENDIF
426	IF ( passive_scalar .AND. constant_waterflux ) THEN
427	WRITE ( io, 313 ) surface_waterflux
428	ENDIF
429	ENDIF
430
431	IF ( use_top_fluxes ) THEN
432	WRITE ( io, 304 )
433	IF ( constant_top_heatflux ) THEN
434	WRITE ( io, 306 ) top_heatflux
435	ENDIF
436	IF ( humidity .OR. passive_scalar ) THEN
437	WRITE ( io, 315 )
438	ENDIF
439	ENDIF
440
441	IF ( prandtl_layer ) THEN
442	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
443	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
444	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
445	WRITE ( io, 312 )
446	ENDIF
447	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
448	WRITE ( io, 314 )
449	ENDIF
450	ELSE
451	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
452	WRITE ( io, 310 ) rif_min, rif_max
453	ENDIF
454	ENDIF
455
456	WRITE ( io, 317 ) bc_lr, bc_ns
457	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
458	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
459	ENDIF
460
461	!
462	!-- Listing of 1D-profiles
463	WRITE ( io, 320 ) dt_dopr_listing
464	IF ( averaging_interval_pr /= 0.0 ) THEN
465	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
466	ENDIF
467
468	!
469	!-- DATA output
470	WRITE ( io, 330 )
471	IF ( averaging_interval_pr /= 0.0 ) THEN
472	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
473	ENDIF
474
475	!
476	!-- 1D-profiles
477	dopr_chr = 'Profile:'
478	IF ( dopr_n /= 0 ) THEN
479	WRITE ( io, 331 )
480
481	output_format = ''
482	IF ( netcdf_output ) THEN
483	IF ( netcdf_64bit ) THEN
484	output_format = 'netcdf (64 bit offset)'
485	ELSE
486	output_format = 'netcdf'
487	ENDIF
488	ENDIF
489	IF ( profil_output ) THEN
490	IF ( netcdf_output ) THEN
491	output_format = TRIM( output_format ) // ' and profil'
492	ELSE
493	output_format = 'profil'
494	ENDIF
495	ENDIF
496	WRITE ( io, 345 ) output_format
497
498	DO i = 1, dopr_n
499	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
500	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
501	WRITE ( io, 332 ) dopr_chr
502	dopr_chr = ' :'
503	ENDIF
504	ENDDO
505
506	IF ( dopr_chr /= '' ) THEN
507	WRITE ( io, 332 ) dopr_chr
508	ENDIF
509	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
510	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
511	ENDIF
512
513	!
514	!-- 2D-arrays
515	DO av = 0, 1
516
517	i = 1
518	do2d_xy = ''
519	do2d_xz = ''
520	do2d_yz = ''
521	DO WHILE ( do2d(av,i) /= ' ' )
522
523	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
524	do2d_mode = do2d(av,i)(l-1:l)
525
526	SELECT CASE ( do2d_mode )
527	CASE ( 'xy' )
528	ll = LEN_TRIM( do2d_xy )
529	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
530	CASE ( 'xz' )
531	ll = LEN_TRIM( do2d_xz )
532	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
533	CASE ( 'yz' )
534	ll = LEN_TRIM( do2d_yz )
535	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
536	END SELECT
537
538	i = i + 1
539
540	ENDDO
541
542	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
543	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
544	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
545	( netcdf_output .OR. iso2d_output ) ) THEN
546
547	IF ( av == 0 ) THEN
548	WRITE ( io, 334 ) ''
549	ELSE
550	WRITE ( io, 334 ) '(time-averaged)'
551	ENDIF
552
553	IF ( do2d_at_begin ) THEN
554	begin_chr = 'and at the start'
555	ELSE
556	begin_chr = ''
557	ENDIF
558
559	output_format = ''
560	IF ( netcdf_output ) THEN
561	IF ( netcdf_64bit ) THEN
562	output_format = 'netcdf (64 bit offset)'
563	ELSE
564	output_format = 'netcdf'
565	ENDIF
566	ENDIF
567	IF ( iso2d_output ) THEN
568	IF ( netcdf_output ) THEN
569	output_format = TRIM( output_format ) // ' and iso2d'
570	ELSE
571	output_format = 'iso2d'
572	ENDIF
573	ENDIF
574	WRITE ( io, 345 ) output_format
575
576	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
577	i = 1
578	slices = '/'
579	coordinates = '/'
580	!
581	!-- Building strings with index and coordinate informations of the
582	!-- slices
583	DO WHILE ( section(i,1) /= -9999 )
584
585	WRITE (section_chr,'(I5)') section(i,1)
586	section_chr = ADJUSTL( section_chr )
587	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
588
589	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
590	coor_chr = ADJUSTL( coor_chr )
591	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
592
593	i = i + 1
594	ENDDO
595	IF ( av == 0 ) THEN
596	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
597	TRIM( begin_chr ), 'k', TRIM( slices ), &
598	TRIM( coordinates )
599	IF ( skip_time_do2d_xy /= 0.0 ) THEN
600	WRITE ( io, 339 ) skip_time_do2d_xy
601	ENDIF
602	ELSE
603	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
604	TRIM( begin_chr ), averaging_interval, &
605	dt_averaging_input, 'k', TRIM( slices ), &
606	TRIM( coordinates )
607	IF ( skip_time_data_output_av /= 0.0 ) THEN
608	WRITE ( io, 339 ) skip_time_data_output_av
609	ENDIF
610	ENDIF
611
612	ENDIF
613
614	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
615	i = 1
616	slices = '/'
617	coordinates = '/'
618	!
619	!-- Building strings with index and coordinate informations of the
620	!-- slices
621	DO WHILE ( section(i,2) /= -9999 )
622
623	WRITE (section_chr,'(I5)') section(i,2)
624	section_chr = ADJUSTL( section_chr )
625	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
626
627	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
628	coor_chr = ADJUSTL( coor_chr )
629	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
630
631	i = i + 1
632	ENDDO
633	IF ( av == 0 ) THEN
634	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
635	TRIM( begin_chr ), 'j', TRIM( slices ), &
636	TRIM( coordinates )
637	IF ( skip_time_do2d_xz /= 0.0 ) THEN
638	WRITE ( io, 339 ) skip_time_do2d_xz
639	ENDIF
640	ELSE
641	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
642	TRIM( begin_chr ), averaging_interval, &
643	dt_averaging_input, 'j', TRIM( slices ), &
644	TRIM( coordinates )
645	IF ( skip_time_data_output_av /= 0.0 ) THEN
646	WRITE ( io, 339 ) skip_time_data_output_av
647	ENDIF
648	ENDIF
649	ENDIF
650
651	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
652	i = 1
653	slices = '/'
654	coordinates = '/'
655	!
656	!-- Building strings with index and coordinate informations of the
657	!-- slices
658	DO WHILE ( section(i,3) /= -9999 )
659
660	WRITE (section_chr,'(I5)') section(i,3)
661	section_chr = ADJUSTL( section_chr )
662	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
663
664	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
665	coor_chr = ADJUSTL( coor_chr )
666	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
667
668	i = i + 1
669	ENDDO
670	IF ( av == 0 ) THEN
671	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
672	TRIM( begin_chr ), 'i', TRIM( slices ), &
673	TRIM( coordinates )
674	IF ( skip_time_do2d_yz /= 0.0 ) THEN
675	WRITE ( io, 339 ) skip_time_do2d_yz
676	ENDIF
677	ELSE
678	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
679	TRIM( begin_chr ), averaging_interval, &
680	dt_averaging_input, 'i', TRIM( slices ), &
681	TRIM( coordinates )
682	IF ( skip_time_data_output_av /= 0.0 ) THEN
683	WRITE ( io, 339 ) skip_time_data_output_av
684	ENDIF
685	ENDIF
686	ENDIF
687
688	ENDIF
689
690	ENDDO
691
692	!
693	!-- 3d-arrays
694	DO av = 0, 1
695
696	i = 1
697	do3d_chr = ''
698	DO WHILE ( do3d(av,i) /= ' ' )
699
700	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
701	i = i + 1
702
703	ENDDO
704
705	IF ( do3d_chr /= '' ) THEN
706	IF ( av == 0 ) THEN
707	WRITE ( io, 336 ) ''
708	ELSE
709	WRITE ( io, 336 ) '(time-averaged)'
710	ENDIF
711
712	output_format = ''
713	IF ( netcdf_output ) THEN
714	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
715	output_format = 'netcdf (64 bit offset)'
716	ELSE
717	output_format = 'netcdf'
718	ENDIF
719	ENDIF
720	IF ( avs_output ) THEN
721	IF ( netcdf_output ) THEN
722	output_format = TRIM( output_format ) // ' and avs'
723	ELSE
724	output_format = 'avs'
725	ENDIF
726	ENDIF
727	WRITE ( io, 345 ) output_format
728
729	IF ( do3d_at_begin ) THEN
730	begin_chr = 'and at the start'
731	ELSE
732	begin_chr = ''
733	ENDIF
734	IF ( av == 0 ) THEN
735	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
736	zu(nz_do3d), nz_do3d
737	ELSE
738	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
739	TRIM( begin_chr ), averaging_interval, &
740	dt_averaging_input, zu(nz_do3d), nz_do3d
741	ENDIF
742
743	IF ( do3d_compress ) THEN
744	do3d_chr = ''
745	i = 1
746	DO WHILE ( do3d(av,i) /= ' ' )
747
748	SELECT CASE ( do3d(av,i) )
749	CASE ( 'u' )
750	j = 1
751	CASE ( 'v' )
752	j = 2
753	CASE ( 'w' )
754	j = 3
755	CASE ( 'p' )
756	j = 4
757	CASE ( 'pt' )
758	j = 5
759	END SELECT
760	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
761	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
762	':' // prec // ','
763	i = i + 1
764
765	ENDDO
766	WRITE ( io, 338 ) do3d_chr
767
768	ENDIF
769
770	IF ( av == 0 ) THEN
771	IF ( skip_time_do3d /= 0.0 ) THEN
772	WRITE ( io, 339 ) skip_time_do3d
773	ENDIF
774	ELSE
775	IF ( skip_time_data_output_av /= 0.0 ) THEN
776	WRITE ( io, 339 ) skip_time_data_output_av
777	ENDIF
778	ENDIF
779
780	ENDIF
781
782	ENDDO
783
784	!
785	!-- Timeseries
786	IF ( dt_dots /= 9999999.9 ) THEN
787	WRITE ( io, 340 )
788
789	output_format = ''
790	IF ( netcdf_output ) THEN
791	IF ( netcdf_64bit ) THEN
792	output_format = 'netcdf (64 bit offset)'
793	ELSE
794	output_format = 'netcdf'
795	ENDIF
796	ENDIF
797	IF ( profil_output ) THEN
798	IF ( netcdf_output ) THEN
799	output_format = TRIM( output_format ) // ' and profil'
800	ELSE
801	output_format = 'profil'
802	ENDIF
803	ENDIF
804	WRITE ( io, 345 ) output_format
805	WRITE ( io, 341 ) dt_dots
806	ENDIF
807
808	#if defined( __dvrp_graphics )
809	!
810	!-- Dvrp-output
811	IF ( dt_dvrp /= 9999999.9 ) THEN
812	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
813	TRIM( dvrp_username ), TRIM( dvrp_directory )
814	i = 1
815	l = 0
816	DO WHILE ( mode_dvrp(i) /= ' ' )
817	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
818	READ ( mode_dvrp(i), '(10X,I1)' ) j
819	l = l + 1
820	IF ( do3d(0,j) /= ' ' ) THEN
821	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
822	ENDIF
823	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
824	READ ( mode_dvrp(i), '(6X,I1)' ) j
825	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
826	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
827	WRITE ( io, 363 )
828	ENDIF
829	i = i + 1
830	ENDDO
831	ENDIF
832	#endif
833
834	#if defined( __spectra )
835	!
836	!-- Spectra output
837	IF ( dt_dosp /= 9999999.9 ) THEN
838	WRITE ( io, 370 )
839
840	output_format = ''
841	IF ( netcdf_output ) THEN
842	IF ( netcdf_64bit ) THEN
843	output_format = 'netcdf (64 bit offset)'
844	ELSE
845	output_format = 'netcdf'
846	ENDIF
847	ENDIF
848	IF ( profil_output ) THEN
849	IF ( netcdf_output ) THEN
850	output_format = TRIM( output_format ) // ' and profil'
851	ELSE
852	output_format = 'profil'
853	ENDIF
854	ENDIF
855	WRITE ( io, 345 ) output_format
856	WRITE ( io, 371 ) dt_dosp
857	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
858	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
859	( spectra_direction(i), i = 1,10 ), &
860	( comp_spectra_level(i), i = 1,10 ), &
861	( plot_spectra_level(i), i = 1,10 ), &
862	averaging_interval_sp, dt_averaging_input_pr
863	ENDIF
864	#endif
865
866	WRITE ( io, 99 )
867
868	!
869	!-- Physical quantities
870	WRITE ( io, 400 )
871
872	!
873	!-- Geostrophic parameters
874	WRITE ( io, 410 ) omega, phi, f, fs
875
876	!
877	!-- Other quantities
878	WRITE ( io, 411 ) g
879	IF ( use_pt_reference ) WRITE ( io, 412 ) pt_reference
880
881	!
882	!-- Cloud physics parameters
883	IF ( cloud_physics ) THEN
884	WRITE ( io, 415 )
885	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
886	ENDIF
887
888	!-- Profile of the geostrophic wind (component ug)
889	!-- Building output strings
890	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
891	gradients = '------'
892	slices = ' 0'
893	coordinates = ' 0.0'
894	i = 1
895	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
896
897	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
898	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
899
900	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
901	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
902
903	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
904	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
905
906	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
907	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
908
909	i = i + 1
910	ENDDO
911
912	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
913	TRIM( gradients ), TRIM( slices )
914
915	!-- Profile of the geostrophic wind (component vg)
916	!-- Building output strings
917	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
918	gradients = '------'
919	slices = ' 0'
920	coordinates = ' 0.0'
921	i = 1
922	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
923
924	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
925	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
926
927	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
928	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
929
930	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
931	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
932
933	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
934	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
935
936	i = i + 1
937	ENDDO
938
939	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
940	TRIM( gradients ), TRIM( slices )
941
942	!
943	!-- Initial temperature profile
944	!-- Building output strings, starting with surface temperature
945	WRITE ( temperatures, '(F6.2)' ) pt_surface
946	gradients = '------'
947	slices = ' 0'
948	coordinates = ' 0.0'
949	i = 1
950	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
951
952	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
953	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
954
955	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
956	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
957
958	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
959	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
960
961	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
962	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
963
964	i = i + 1
965	ENDDO
966
967	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
968	TRIM( gradients ), TRIM( slices )
969
970	!
971	!-- Initial humidity profile
972	!-- Building output strings, starting with surface humidity
973	IF ( humidity .OR. passive_scalar ) THEN
974	WRITE ( temperatures, '(E8.1)' ) q_surface
975	gradients = '--------'
976	slices = ' 0'
977	coordinates = ' 0.0'
978	i = 1
979	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
980
981	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
982	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
983
984	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
985	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
986
987	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
988	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
989
990	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
991	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
992
993	i = i + 1
994	ENDDO
995
996	IF ( humidity ) THEN
997	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
998	TRIM( gradients ), TRIM( slices )
999	ELSE
1000	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1001	TRIM( gradients ), TRIM( slices )
1002	ENDIF
1003	ENDIF
1004
1005	!
1006	!-- LES / turbulence parameters
1007	WRITE ( io, 450 )
1008
1009	!--
1010	! ... LES-constants used must still be added here
1011	!--
1012	IF ( constant_diffusion ) THEN
1013	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1014	prandtl_number
1015	ENDIF
1016	IF ( .NOT. constant_diffusion) THEN
1017	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1018	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1019	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1020	ENDIF
1021
1022	!
1023	!-- Special actions during the run
1024	WRITE ( io, 470 )
1025	IF ( create_disturbances ) THEN
1026	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1027	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1028	zu(disturbance_level_ind_t), disturbance_level_ind_t
1029	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1030	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1031	ELSE
1032	WRITE ( io, 473 ) disturbance_energy_limit
1033	ENDIF
1034	WRITE ( io, 474 ) TRIM( random_generator )
1035	ENDIF
1036	IF ( pt_surface_initial_change /= 0.0 ) THEN
1037	WRITE ( io, 475 ) pt_surface_initial_change
1038	ENDIF
1039	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1040	WRITE ( io, 476 ) q_surface_initial_change
1041	ENDIF
1042	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1043	WRITE ( io, 477 ) q_surface_initial_change
1044	ENDIF
1045
1046	IF ( particle_advection ) THEN
1047	!
1048	!-- Particle attributes
1049	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1050	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1051	end_time_prel
1052	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1053	IF ( random_start_position ) WRITE ( io, 481 )
1054	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1055	WRITE ( io, 495 ) total_number_of_particles
1056	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1057	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1058	WRITE ( io, 483 ) maximum_number_of_tailpoints
1059	IF ( minimum_tailpoint_distance /= 0 ) THEN
1060	WRITE ( io, 484 ) total_number_of_tails, &
1061	minimum_tailpoint_distance, &
1062	maximum_tailpoint_age
1063	ENDIF
1064	ENDIF
1065	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1066	WRITE ( io, 485 ) dt_write_particle_data
1067	output_format = ''
1068	IF ( netcdf_output ) THEN
1069	IF ( netcdf_64bit ) THEN
1070	output_format = 'netcdf (64 bit offset) and binary'
1071	ELSE
1072	output_format = 'netcdf and binary'
1073	ENDIF
1074	ELSE
1075	output_format = 'binary'
1076	ENDIF
1077	WRITE ( io, 345 ) output_format
1078	ENDIF
1079	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1080	IF ( write_particle_statistics ) WRITE ( io, 486 )
1081
1082	WRITE ( io, 487 ) number_of_particle_groups
1083
1084	DO i = 1, number_of_particle_groups
1085	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1086	WRITE ( io, 490 ) i, 0.0
1087	WRITE ( io, 492 )
1088	ELSE
1089	WRITE ( io, 490 ) i, radius(i)
1090	IF ( density_ratio(i) /= 0.0 ) THEN
1091	WRITE ( io, 491 ) density_ratio(i)
1092	ELSE
1093	WRITE ( io, 492 )
1094	ENDIF
1095	ENDIF
1096	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1097	pdx(i), pdy(i), pdz(i)
1098	ENDDO
1099
1100	ENDIF
1101
1102
1103	!
1104	!-- Parameters of 1D-model
1105	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1106	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1107	mixing_length_1d, dissipation_1d
1108	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1109	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1110	ENDIF
1111	ENDIF
1112
1113	!
1114	!-- User-defined informations
1115	CALL user_header( io )
1116
1117	WRITE ( io, 99 )
1118
1119	!
1120	!-- Write buffer contents to disc immediately
1121	CALL local_flush( io )
1122
1123	!
1124	!-- Here the FORMATs start
1125
1126	99 FORMAT (1X,78('-'))
1127	100 FORMAT (/1X,'*************************',11X,28('-')/ &
1128	1X,'* ',A,' *',11X,A/ &
1129	1X,'*************************',11X,28('-')// &
1130	' Date: ',A8,11X,'Run: ',A20/ &
1131	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1132	' Run on host: ',A10)
1133	#if defined( __parallel )
1134	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1135	')',1X,A)
1136	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1137	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1138	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1139	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1140	37X,'because the job is running on an SMP-cluster')
1141	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1142	#endif
1143	110 FORMAT (/' Numerical Schemes:'/ &
1144	' -----------------'/)
1145	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1146	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1147	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1148	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1149	' or Upstream')
1150	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1151	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1152	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1153	' or Upstream')
1154	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1155	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1156	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1157	' Translation velocity = ',A/ &
1158	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1159	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1160	' of timestep changes)')
1161	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1162	' timestep changes')
1163	122 FORMAT (' --> Time differencing scheme: ',A)
1164	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
1165	' maximum damping coefficient: ',F5.3, ' 1/s')
1166	124 FORMAT (' Spline-overshoots are being suppressed')
1167	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1168	' of'/ &
1169	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1170	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1171	' of'/ &
1172	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1173	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1174	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1175	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1176	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1177	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1178	130 FORMAT (' --> Additional prognostic equation for the total water content')
1179	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1180	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1181	' effective emissivity scheme')
1182	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1183	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1184	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1185	A,'-cycle)'/ &
1186	' number of grid levels: ',I2/ &
1187	' Gauss-Seidel red/black iterations: ',I2)
1188	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1189	I3,')')
1190	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1191	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1192	I3,')'/ &
1193	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1194	I3,')')
1195	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1196	139 FORMAT (' --> Loop optimization method: ',A)
1197	140 FORMAT (' maximum residual allowed: ',E10.3)
1198	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1199	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1200	'step')
1201	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1202	'kinetic energy')
1203	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1204	'conserved')
1205	200 FORMAT (//' Run time and time step information:'/ &
1206	' ----------------------------------'/)
1207	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1208	' CFL-factor: ',F4.2)
1209	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1210	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1211	' End time: ',F9.3,' s')
1212	204 FORMAT ( A,F9.3,' s')
1213	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1214	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1215	' CPU-time used: ',F9.3,' s per timestep: ', &
1216	' ',F9.3,' s'/ &
1217	' per second of simulated tim', &
1218	'e: ',F9.3,' s')
1219	250 FORMAT (//' Computational grid and domain size:'/ &
1220	' ----------------------------------'// &
1221	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1222	' m dz = ',F7.3,' m'/ &
1223	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1224	' m z(u) = ',F10.3,' m'/)
1225	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1226	' factor: ',F5.3/ &
1227	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1228	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1229	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1230	255 FORMAT (' Subdomains have equal size')
1231	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1232	'have smaller sizes'/ &
1233	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1234	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1235	' degrees')
1236	270 FORMAT (//' Topography informations:'/ &
1237	' -----------------------'// &
1238	1X,'Topography: ',A)
1239	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1240	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1241	' / ',I4)
1242	300 FORMAT (//' Boundary conditions:'/ &
1243	' -------------------'// &
1244	' p uv ', &
1245	' pt'// &
1246	' B. bound.: ',A/ &
1247	' T. bound.: ',A)
1248	301 FORMAT (/' e'// &
1249	' B. bound.: ',A/ &
1250	' T. bound.: ',A)
1251	302 FORMAT (/' q'// &
1252	' B. bound.: ',A/ &
1253	' T. bound.: ',A)
1254	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1255	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1256	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1257	'computational u,v-level:'// &
1258	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1259	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1260	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
1261	307 FORMAT (' Heatflux has a random normal distribution')
1262	308 FORMAT (' Predefined surface temperature')
1263	310 FORMAT (//' 1D-Model:'// &
1264	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1265	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1266	312 FORMAT (' Predefined surface humidity')
1267	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1268	314 FORMAT (' Predefined scalar value at the surface')
1269	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1270	317 FORMAT (//' Lateral boundaries:'/ &
1271	' left/right: ',A/ &
1272	' north/south: ',A)
1273	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1274	'max =',F5.1,' m**2/s')
1275	320 FORMAT (//' List output:'/ &
1276	' -----------'// &
1277	' 1D-Profiles:'/ &
1278	' Output every ',F8.2,' s')
1279	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1280	' Averaging input every ',F8.2,' s')
1281	330 FORMAT (//' Data output:'/ &
1282	' -----------'/)
1283	331 FORMAT (/' 1D-Profiles:')
1284	332 FORMAT (/' ',A)
1285	333 FORMAT (' Output every ',F8.2,' s',/ &
1286	' Time averaged over ',F8.2,' s'/ &
1287	' Averaging input every ',F8.2,' s')
1288	334 FORMAT (/' 2D-Arrays',A,':')
1289	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1290	' Output every ',F8.2,' s ',A/ &
1291	' Cross sections at ',A1,' = ',A/ &
1292	' scalar-coordinates: ',A,' m'/)
1293	336 FORMAT (/' 3D-Arrays',A,':')
1294	337 FORMAT (/' Arrays: ',A/ &
1295	' Output every ',F8.2,' s ',A/ &
1296	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1297	338 FORMAT (' Compressed data output'/ &
1298	' Decimal precision: ',A/)
1299	339 FORMAT (' No output during initial ',F8.2,' s')
1300	340 FORMAT (/' Time series:')
1301	341 FORMAT (' Output every ',F8.2,' s'/)
1302	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1303	' Output every ',F8.2,' s ',A/ &
1304	' Time averaged over ',F8.2,' s'/ &
1305	' Averaging input every ',F8.2,' s'/ &
1306	' Cross sections at ',A1,' = ',A/ &
1307	' scalar-coordinates: ',A,' m'/)
1308	343 FORMAT (/' Arrays: ',A/ &
1309	' Output every ',F8.2,' s ',A/ &
1310	' Time averaged over ',F8.2,' s'/ &
1311	' Averaging input every ',F8.2,' s'/ &
1312	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1313	345 FORMAT (' Output format: ',A/)
1314	#if defined( __dvrp_graphics )
1315	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1316	' Output every ',F7.1,' s'/ &
1317	' Output mode: ',A/ &
1318	' Host / User: ',A,' / ',A/ &
1319	' Directory: ',A// &
1320	' The sequence contains:')
1321	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1322	362 FORMAT (' Sectional plane ',A)
1323	363 FORMAT (' Particles')
1324	#endif
1325	#if defined( __spectra )
1326	370 FORMAT (' Spectra:')
1327	371 FORMAT (' Output every ',F7.1,' s'/)
1328	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1329	' Directions: ', 10(A5,',')/ &
1330	' height levels k = ', 9(I3,','),I3,'.'/ &
1331	' height levels selected for standard plot:'/ &
1332	' k = ', 9(I3,','),I3,'.'/ &
1333	' Time averaged over ', F7.1, ' s,' / &
1334	' Profiles for the time averaging are taken every ', &
1335	F6.1,' s')
1336	#endif
1337	400 FORMAT (//' Physical quantities:'/ &
1338	' -------------------'/)
1339	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1340	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1341	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1342	' f* = ',F9.6,' 1/s')
1343	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1344	412 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1345	415 FORMAT (/' Cloud physics parameters:'/ &
1346	' ------------------------'/)
1347	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1348	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1349	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1350	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1351	' Vapourization heat : L_v = ',E8.2,' J/kg')
1352	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1353	' Height: ',A,' m'/ &
1354	' Temperature: ',A,' K'/ &
1355	' Gradient: ',A,' K/100m'/ &
1356	' Gridpoint: ',A)
1357	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1358	' Height: ',A,' m'/ &
1359	' Humidity: ',A,' kg/kg'/ &
1360	' Gradient: ',A,' (kg/kg)/100m'/ &
1361	' Gridpoint: ',A)
1362	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1363	' Height: ',A,' m'/ &
1364	' Scalar concentration: ',A,' kg/m**3'/ &
1365	' Gradient: ',A,' (kg/m**3)/100m'/ &
1366	' Gridpoint: ',A)
1367	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1368	' Height: ',A,' m'/ &
1369	' ug: ',A,' m/s'/ &
1370	' Gradient: ',A,' 1/100s'/ &
1371	' Gridpoint: ',A)
1372	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1373	' Height: ',A,' m'/ &
1374	' vg: ',A,' m/S'/ &
1375	' Gradient: ',A,' 1/100s'/ &
1376	' Gridpoint: ',A)
1377	450 FORMAT (//' LES / Turbulence quantities:'/ &
1378	' ---------------------------'/)
1379	451 FORMAT (' Diffusion coefficients are constant:'/ &
1380	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1381	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1382	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1383	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1384	470 FORMAT (//' Actions during the simulation:'/ &
1385	' -----------------------------'/)
1386	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1387	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1388	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
1389	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
1390	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1391	' to i/j =',I4)
1392	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1393	1X,F5.3, ' m2/s2')
1394	474 FORMAT (' Random number generator used : ',A/)
1395	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1396	'respectively, if'/ &
1397	' the value is negative) by ',F5.2,' K at the beginning of the',&
1398	' 3D-simulation'/)
1399	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1400	'respectively, if the'/ &
1401	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1402	' the 3D-simulation'/)
1403	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1404	'respectively, if the'/ &
1405	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1406	' the 3D-simulation'/)
1407	480 FORMAT (' Particles:'/ &
1408	' ---------'// &
1409	' Particle advection is active (switched on at t = ', F7.1, &
1410	' s)'/ &
1411	' Start of new particle generations every ',F6.1,' s'/ &
1412	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1413	' bottom: ', A, ' top: ', A/&
1414	' Maximum particle age: ',F9.1,' s'/ &
1415	' Advection stopped at t = ',F9.1,' s'/)
1416	481 FORMAT (' Particles have random start positions'/)
1417	482 FORMAT (' Particles are advected only horizontally'/)
1418	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1419	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1420	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1421	' Maximum age of the end of the tail: ',F8.2,' s')
1422	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1423	486 FORMAT (' Particle statistics are written on file'/)
1424	487 FORMAT (' Number of particle groups: ',I2/)
1425	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1426	' minimum timestep for advection: ', F7.5/)
1427	489 FORMAT (' Number of particles simultaneously released at each ', &
1428	'point: ', I5/)
1429	490 FORMAT (' Particle group ',I2,':'/ &
1430	' Particle radius: ',E10.3, 'm')
1431	491 FORMAT (' Particle inertia is activated'/ &
1432	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1433	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1434	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1435	' y:',F8.1,' - ',F8.1,' m'/&
1436	' z:',F8.1,' - ',F8.1,' m'/&
1437	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1438	' m dz = ',F8.1,' m'/)
1439	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1440	F8.2,' s'/)
1441	495 FORMAT (' Number of particles in total domain: ',I10/)
1442	500 FORMAT (//' 1D-Model parameters:'/ &
1443	' -------------------'// &
1444	' Simulation time: ',F8.1,' s'/ &
1445	' Run-controll output every: ',F8.1,' s'/ &
1446	' Vertical profile output every: ',F8.1,' s'/ &
1447	' Mixing length calculation: ',A/ &
1448	' Dissipation calculation: ',A/)
1449	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1450
1451
1452	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 91

Download in other formats: