Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 755

Last change on this file since 755 was 708, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.1 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 708 2011-03-29 12:34:54Z witha $
11	!
12	! 707 2011-03-29 11:39:40Z raasch
13	! bc_lr/ns replaced by bc_lr/ns_cyc
14	!
15	! 667 2010-12-23 12:06:00Z suehring/gryschka
16	! Output of advection scheme.
17	! Modified output of Prandtl-layer height.
18	!
19	! 580 2010-10-05 13:59:11Z heinze
20	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
21	! ws_vertical_gradient_level to subs_vertical_gradient_level and
22	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
23	!
24	! 493 2010-03-01 08:30:24Z raasch
25	! NetCDF data output format extendend for NetCDF4/HDF5
26	!
27	! 449 2010-02-02 11:23:59Z raasch
28	! +large scale vertical motion (subsidence/ascent)
29	! Bugfix: index problem concerning gradient_level indices removed
30	!
31	! 410 2009-12-04 17:05:40Z letzel
32	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
33	! mask_scale\|_x\|y\|z, masks, skip_time_domask
34	!
35	! 346 2009-07-06 10:13:41Z raasch
36	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
37	! Coupling with independent precursor runs.
38	! Output of messages replaced by message handling routine.
39	! Output of several additional dvr parameters
40	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
41	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
42	! dp_smooth, dpdxy, u_bulk, v_bulk
43	! topography_grid_convention moved from user_header
44	! small bugfix concerning 3d 64bit netcdf output format
45	!
46	! 206 2008-10-13 14:59:11Z raasch
47	! Bugfix: error in zu index in case of section_xy = -1
48	!
49	! 198 2008-09-17 08:55:28Z raasch
50	! Format adjustments allowing output of larger revision numbers
51	!
52	! 197 2008-09-16 15:29:03Z raasch
53	! allow 100 spectra levels instead of 10 for consistency with
54	! define_netcdf_header,
55	! bugfix in the output of the characteristic levels of potential temperature,
56	! geostrophic wind, scalar concentration, humidity and leaf area density,
57	! output of turbulence recycling informations
58	!
59	! 138 2007-11-28 10:03:58Z letzel
60	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
61	! Allow two instead of one digit to specify isosurface and slicer variables.
62	! Output of sorting frequency of particles
63	!
64	! 108 2007-08-24 15:10:38Z letzel
65	! Output of informations for coupled model runs (boundary conditions etc.)
66	! + output of momentumfluxes at the top boundary
67	! Rayleigh damping for ocean, e_init
68	!
69	! 97 2007-06-21 08:23:15Z raasch
70	! Adjustments for the ocean version.
71	! use_pt_reference renamed use_reference
72	!
73	! 87 2007-05-22 15:46:47Z raasch
74	! Bugfix: output of use_upstream_for_tke
75	!
76	! 82 2007-04-16 15:40:52Z raasch
77	! Preprocessor strings for different linux clusters changed to "lc",
78	! routine local_flush is used for buffer flushing
79	!
80	! 76 2007-03-29 00:58:32Z raasch
81	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
82	! output of the loop optimization method, moisture renamed humidity,
83	! output of subversion revision number
84	!
85	! 19 2007-02-23 04:53:48Z raasch
86	! Output of scalar flux applied at top boundary
87	!
88	! RCS Log replace by Id keyword, revision history cleaned up
89	!
90	! Revision 1.63 2006/08/22 13:53:13 raasch
91	! Output of dz_max
92	!
93	! Revision 1.1 1997/08/11 06:17:20 raasch
94	! Initial revision
95	!
96	!
97	! Description:
98	! ------------
99	! Writing a header with all important informations about the actual run.
100	! This subroutine is called three times, two times at the beginning
101	! (writing information on files RUN_CONTROL and HEADER) and one time at the
102	! end of the run, then writing additional information about CPU-usage on file
103	! header.
104	!-----------------------------------------------------------------------------!
105
106	USE arrays_3d
107	USE control_parameters
108	USE cloud_parameters
109	USE cpulog
110	USE dvrp_variables
111	USE grid_variables
112	USE indices
113	USE model_1d
114	USE particle_attributes
115	USE pegrid
116	USE subsidence_mod
117	USE spectrum
118
119	IMPLICIT NONE
120
121	CHARACTER (LEN=1) :: prec
122	CHARACTER (LEN=2) :: do2d_mode
123	CHARACTER (LEN=5) :: section_chr
124	CHARACTER (LEN=9) :: time_to_string
125	CHARACTER (LEN=10) :: coor_chr, host_chr
126	CHARACTER (LEN=16) :: begin_chr
127	CHARACTER (LEN=23) :: ver_rev
128	CHARACTER (LEN=40) :: output_format
129	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
130	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
131	domask_chr, run_classification
132	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
133	temperatures, ugcomponent, vgcomponent
134	CHARACTER (LEN=85) :: roben, runten
135
136	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
137
138	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
139	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
140	REAL :: cpuseconds_per_simulated_second
141
142	!
143	!-- Open the output file. At the end of the simulation, output is directed
144	!-- to unit 19.
145	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
146	.NOT. simulated_time_at_begin /= simulated_time ) THEN
147	io = 15 ! header output on file RUN_CONTROL
148	ELSE
149	io = 19 ! header output on file HEADER
150	ENDIF
151	CALL check_open( io )
152
153	!
154	!-- At the end of the run, output file (HEADER) will be rewritten with
155	!-- new informations
156	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
157
158	!
159	!-- Determine kind of model run
160	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
161	run_classification = '3D - restart run'
162	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
163	run_classification = '3D - run with cyclic fill of 3D - prerun data'
164	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
165	run_classification = '3D - run without 1D - prerun'
166	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
167	run_classification = '3D - run with 1D - prerun'
168	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
169	run_classification = '3D - run initialized by user'
170	ELSE
171	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
172	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
173	ENDIF
174	IF ( ocean ) THEN
175	run_classification = 'ocean - ' // run_classification
176	ELSE
177	run_classification = 'atmosphere - ' // run_classification
178	ENDIF
179
180	!
181	!-- Run-identification, date, time, host
182	host_chr = host(1:10)
183	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
184	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
185	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
186	#if defined( __mpi2 )
187	mpi_type = 2
188	#else
189	mpi_type = 1
190	#endif
191	WRITE ( io, 101 ) mpi_type, coupling_mode
192	ENDIF
193	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
194	ADJUSTR( host_chr )
195	#if defined( __parallel )
196	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
197	char1 = 'calculated'
198	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
199	host(1:2) == 'lc' ) .AND. &
200	npex == -1 .AND. pdims(2) == 1 ) THEN
201	char1 = 'forced'
202	ELSE
203	char1 = 'predefined'
204	ENDIF
205	IF ( threads_per_task == 1 ) THEN
206	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
207	ELSE
208	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
209	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
210	ENDIF
211	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
212	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
213	npex == -1 .AND. pdims(2) == 1 ) &
214	THEN
215	WRITE ( io, 106 )
216	ELSEIF ( pdims(2) == 1 ) THEN
217	WRITE ( io, 107 ) 'x'
218	ELSEIF ( pdims(1) == 1 ) THEN
219	WRITE ( io, 107 ) 'y'
220	ENDIF
221	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
222	#endif
223	WRITE ( io, 99 )
224
225	!
226	!-- Numerical schemes
227	WRITE ( io, 110 )
228	IF ( psolver(1:7) == 'poisfft' ) THEN
229	WRITE ( io, 111 ) TRIM( fft_method )
230	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
231	ELSEIF ( psolver == 'sor' ) THEN
232	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
233	ELSEIF ( psolver == 'multigrid' ) THEN
234	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
235	IF ( mg_cycles == -1 ) THEN
236	WRITE ( io, 140 ) residual_limit
237	ELSE
238	WRITE ( io, 141 ) mg_cycles
239	ENDIF
240	IF ( mg_switch_to_pe0_level == 0 ) THEN
241	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
242	nzt_mg(1)
243	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
244	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
245	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
246	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
247	nzt_mg(mg_switch_to_pe0_level), &
248	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
249	nzt_mg(1)
250	ENDIF
251	ENDIF
252	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
253	THEN
254	WRITE ( io, 142 )
255	ENDIF
256
257	IF ( momentum_advec == 'pw-scheme' ) THEN
258	WRITE ( io, 113 )
259	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
260	WRITE ( io, 503 )
261	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
262	WRITE ( io, 114 )
263	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
264	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
265	overshoot_limit_w /= 0.0 ) THEN
266	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
267	overshoot_limit_w
268	ENDIF
269	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
270	ups_limit_w /= 0.0 ) &
271	THEN
272	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
273	ENDIF
274	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
275	ENDIF
276	IF ( scalar_advec == 'pw-scheme' ) THEN
277	WRITE ( io, 116 )
278	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
279	WRITE ( io, 504 )
280	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
281	WRITE ( io, 117 )
282	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
283	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
284	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
285	ENDIF
286	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
287	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
288	ENDIF
289	ELSE
290	WRITE ( io, 118 )
291	ENDIF
292
293	WRITE ( io, 139 ) TRIM( loop_optimization )
294
295	IF ( galilei_transformation ) THEN
296	IF ( use_ug_for_galilei_tr ) THEN
297	char1 = 'geostrophic wind'
298	ELSE
299	char1 = 'mean wind in model domain'
300	ENDIF
301	IF ( simulated_time_at_begin == simulated_time ) THEN
302	char2 = 'at the start of the run'
303	ELSE
304	char2 = 'at the end of the run'
305	ENDIF
306	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
307	advected_distance_x/1000.0, advected_distance_y/1000.0
308	ENDIF
309	IF ( timestep_scheme == 'leapfrog' ) THEN
310	WRITE ( io, 120 )
311	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
312	WRITE ( io, 121 )
313	ELSE
314	WRITE ( io, 122 ) timestep_scheme
315	ENDIF
316	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
317	IF ( rayleigh_damping_factor /= 0.0 ) THEN
318	IF ( .NOT. ocean ) THEN
319	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
320	rayleigh_damping_factor
321	ELSE
322	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
323	rayleigh_damping_factor
324	ENDIF
325	ENDIF
326	IF ( humidity ) THEN
327	IF ( .NOT. cloud_physics ) THEN
328	WRITE ( io, 129 )
329	ELSE
330	WRITE ( io, 130 )
331	WRITE ( io, 131 )
332	IF ( radiation ) WRITE ( io, 132 )
333	IF ( precipitation ) WRITE ( io, 133 )
334	ENDIF
335	ENDIF
336	IF ( passive_scalar ) WRITE ( io, 134 )
337	IF ( conserve_volume_flow ) THEN
338	WRITE ( io, 150 ) conserve_volume_flow_mode
339	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
340	WRITE ( io, 151 ) u_bulk, v_bulk
341	ENDIF
342	ELSEIF ( dp_external ) THEN
343	IF ( dp_smooth ) THEN
344	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
345	ELSE
346	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
347	ENDIF
348	ENDIF
349	IF ( large_scale_subsidence ) THEN
350	WRITE ( io, 153 )
351	WRITE ( io, 154 )
352	ENDIF
353	WRITE ( io, 99 )
354
355	!
356	!-- Runtime and timestep informations
357	WRITE ( io, 200 )
358	IF ( .NOT. dt_fixed ) THEN
359	WRITE ( io, 201 ) dt_max, cfl_factor
360	ELSE
361	WRITE ( io, 202 ) dt
362	ENDIF
363	WRITE ( io, 203 ) simulated_time_at_begin, end_time
364
365	IF ( time_restart /= 9999999.9 .AND. &
366	simulated_time_at_begin == simulated_time ) THEN
367	IF ( dt_restart == 9999999.9 ) THEN
368	WRITE ( io, 204 ) ' Restart at: ',time_restart
369	ELSE
370	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
371	ENDIF
372	ENDIF
373
374	IF ( simulated_time_at_begin /= simulated_time ) THEN
375	i = MAX ( log_point_s(10)%counts, 1 )
376	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
377	cpuseconds_per_simulated_second = 0.0
378	ELSE
379	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
380	( simulated_time - &
381	simulated_time_at_begin )
382	ENDIF
383	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
384	log_point_s(10)%sum / REAL( i ), &
385	cpuseconds_per_simulated_second
386	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
387	IF ( dt_restart == 9999999.9 ) THEN
388	WRITE ( io, 204 ) ' Next restart at: ',time_restart
389	ELSE
390	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
391	ENDIF
392	ENDIF
393	ENDIF
394
395	!
396	!-- Start time for coupled runs, if independent precursor runs for atmosphere
397	!-- and ocean are used. In this case, coupling_start_time defines the time
398	!-- when the coupling is switched on.
399	IF ( coupling_start_time /= 0.0 ) THEN
400	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
401	char1 = 'Precursor run for a coupled atmosphere-ocean run'
402	ELSE
403	char1 = 'Coupled atmosphere-ocean run following independent ' // &
404	'precursor runs'
405	ENDIF
406	WRITE ( io, 207 ) char1, coupling_start_time
407	ENDIF
408
409	!
410	!-- Computational grid
411	IF ( .NOT. ocean ) THEN
412	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
413	IF ( dz_stretch_level_index < nzt+1 ) THEN
414	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
415	dz_stretch_factor, dz_max
416	ENDIF
417	ELSE
418	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
419	IF ( dz_stretch_level_index > 0 ) THEN
420	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
421	dz_stretch_factor, dz_max
422	ENDIF
423	ENDIF
424	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
425	MIN( nnz+2, nzt+2 )
426	IF ( numprocs > 1 ) THEN
427	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
428	WRITE ( io, 255 )
429	ELSE
430	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
431	ENDIF
432	ENDIF
433	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
434
435	!
436	!-- Topography
437	WRITE ( io, 270 ) topography
438	SELECT CASE ( TRIM( topography ) )
439
440	CASE ( 'flat' )
441	! no actions necessary
442
443	CASE ( 'single_building' )
444	blx = INT( building_length_x / dx )
445	bly = INT( building_length_y / dy )
446	bh = INT( building_height / dz )
447
448	IF ( building_wall_left == 9999999.9 ) THEN
449	building_wall_left = ( nx + 1 - blx ) / 2 * dx
450	ENDIF
451	bxl = INT ( building_wall_left / dx + 0.5 )
452	bxr = bxl + blx
453
454	IF ( building_wall_south == 9999999.9 ) THEN
455	building_wall_south = ( ny + 1 - bly ) / 2 * dy
456	ENDIF
457	bys = INT ( building_wall_south / dy + 0.5 )
458	byn = bys + bly
459
460	WRITE ( io, 271 ) building_length_x, building_length_y, &
461	building_height, bxl, bxr, bys, byn
462
463	CASE ( 'single_street_canyon' )
464	ch = NINT( canyon_height / dz )
465	IF ( canyon_width_x /= 9999999.9 ) THEN
466	!
467	!-- Street canyon in y direction
468	cwx = NINT( canyon_width_x / dx )
469	IF ( canyon_wall_left == 9999999.9 ) THEN
470	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
471	ENDIF
472	cxl = NINT( canyon_wall_left / dx )
473	cxr = cxl + cwx
474	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
475
476	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
477	!
478	!-- Street canyon in x direction
479	cwy = NINT( canyon_width_y / dy )
480	IF ( canyon_wall_south == 9999999.9 ) THEN
481	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
482	ENDIF
483	cys = NINT( canyon_wall_south / dy )
484	cyn = cys + cwy
485	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
486	ENDIF
487
488	END SELECT
489
490	IF ( TRIM( topography ) /= 'flat' ) THEN
491	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
492	IF ( TRIM( topography ) == 'single_building' .OR. &
493	TRIM( topography ) == 'single_street_canyon' ) THEN
494	WRITE ( io, 278 )
495	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
496	WRITE ( io, 279 )
497	ENDIF
498	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
499	WRITE ( io, 278 )
500	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
501	WRITE ( io, 279 )
502	ENDIF
503	ENDIF
504
505	IF ( plant_canopy ) THEN
506
507	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
508	IF ( passive_scalar ) THEN
509	WRITE ( io, 281 ) scalar_exchange_coefficient, &
510	leaf_surface_concentration
511	ENDIF
512
513	!
514	!-- Heat flux at the top of vegetation
515	WRITE ( io, 282 ) cthf
516
517	!
518	!-- Leaf area density profile
519	!-- Building output strings, starting with surface value
520	WRITE ( learde, '(F6.2)' ) lad_surface
521	gradients = '------'
522	slices = ' 0'
523	coordinates = ' 0.0'
524	i = 1
525	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
526
527	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
528	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
529
530	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
531	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
532
533	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
534	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
535
536	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
537	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
538
539	i = i + 1
540	ENDDO
541
542	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
543	TRIM( gradients ), TRIM( slices )
544
545	ENDIF
546
547	!
548	!-- Boundary conditions
549	IF ( ibc_p_b == 0 ) THEN
550	runten = 'p(0) = 0 \|'
551	ELSEIF ( ibc_p_b == 1 ) THEN
552	runten = 'p(0) = p(1) \|'
553	ELSE
554	runten = 'p(0) = p(1) +R\|'
555	ENDIF
556	IF ( ibc_p_t == 0 ) THEN
557	roben = 'p(nzt+1) = 0 \|'
558	ELSE
559	roben = 'p(nzt+1) = p(nzt) \|'
560	ENDIF
561
562	IF ( ibc_uv_b == 0 ) THEN
563	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
564	ELSE
565	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
566	ENDIF
567	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
568	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
569	ELSEIF ( ibc_uv_t == 0 ) THEN
570	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
571	ELSE
572	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
573	ENDIF
574
575	IF ( ibc_pt_b == 0 ) THEN
576	runten = TRIM( runten ) // ' pt(0) = pt_surface'
577	ELSEIF ( ibc_pt_b == 1 ) THEN
578	runten = TRIM( runten ) // ' pt(0) = pt(1)'
579	ELSEIF ( ibc_pt_b == 2 ) THEN
580	runten = TRIM( runten ) // ' pt(0) = from coupled model'
581	ENDIF
582	IF ( ibc_pt_t == 0 ) THEN
583	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
584	ELSEIF( ibc_pt_t == 1 ) THEN
585	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
586	ELSEIF( ibc_pt_t == 2 ) THEN
587	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
588
589	ENDIF
590
591	WRITE ( io, 300 ) runten, roben
592
593	IF ( .NOT. constant_diffusion ) THEN
594	IF ( ibc_e_b == 1 ) THEN
595	runten = 'e(0) = e(1)'
596	ELSE
597	runten = 'e(0) = e(1) = (u/0.1)*2'
598	ENDIF
599	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
600
601	WRITE ( io, 301 ) 'e', runten, roben
602
603	ENDIF
604
605	IF ( ocean ) THEN
606	runten = 'sa(0) = sa(1)'
607	IF ( ibc_sa_t == 0 ) THEN
608	roben = 'sa(nzt+1) = sa_surface'
609	ELSE
610	roben = 'sa(nzt+1) = sa(nzt)'
611	ENDIF
612	WRITE ( io, 301 ) 'sa', runten, roben
613	ENDIF
614
615	IF ( humidity ) THEN
616	IF ( ibc_q_b == 0 ) THEN
617	runten = 'q(0) = q_surface'
618	ELSE
619	runten = 'q(0) = q(1)'
620	ENDIF
621	IF ( ibc_q_t == 0 ) THEN
622	roben = 'q(nzt) = q_top'
623	ELSE
624	roben = 'q(nzt) = q(nzt-1) + dq/dz'
625	ENDIF
626	WRITE ( io, 301 ) 'q', runten, roben
627	ENDIF
628
629	IF ( passive_scalar ) THEN
630	IF ( ibc_q_b == 0 ) THEN
631	runten = 's(0) = s_surface'
632	ELSE
633	runten = 's(0) = s(1)'
634	ENDIF
635	IF ( ibc_q_t == 0 ) THEN
636	roben = 's(nzt) = s_top'
637	ELSE
638	roben = 's(nzt) = s(nzt-1) + ds/dz'
639	ENDIF
640	WRITE ( io, 301 ) 's', runten, roben
641	ENDIF
642
643	IF ( use_surface_fluxes ) THEN
644	WRITE ( io, 303 )
645	IF ( constant_heatflux ) THEN
646	WRITE ( io, 306 ) surface_heatflux
647	IF ( random_heatflux ) WRITE ( io, 307 )
648	ENDIF
649	IF ( humidity .AND. constant_waterflux ) THEN
650	WRITE ( io, 311 ) surface_waterflux
651	ENDIF
652	IF ( passive_scalar .AND. constant_waterflux ) THEN
653	WRITE ( io, 313 ) surface_waterflux
654	ENDIF
655	ENDIF
656
657	IF ( use_top_fluxes ) THEN
658	WRITE ( io, 304 )
659	IF ( coupling_mode == 'uncoupled' ) THEN
660	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
661	IF ( constant_top_heatflux ) THEN
662	WRITE ( io, 306 ) top_heatflux
663	ENDIF
664	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
665	WRITE ( io, 316 )
666	ENDIF
667	IF ( ocean .AND. constant_top_salinityflux ) THEN
668	WRITE ( io, 309 ) top_salinityflux
669	ENDIF
670	IF ( humidity .OR. passive_scalar ) THEN
671	WRITE ( io, 315 )
672	ENDIF
673	ENDIF
674
675	IF ( prandtl_layer ) THEN
676	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
677	rif_min, rif_max
678	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
679	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
680	WRITE ( io, 312 )
681	ENDIF
682	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
683	WRITE ( io, 314 )
684	ENDIF
685	ELSE
686	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
687	WRITE ( io, 310 ) rif_min, rif_max
688	ENDIF
689	ENDIF
690
691	WRITE ( io, 317 ) bc_lr, bc_ns
692	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
693	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
694	IF ( turbulent_inflow ) THEN
695	WRITE ( io, 319 ) recycling_width, recycling_plane, &
696	inflow_damping_height, inflow_damping_width
697	ENDIF
698	ENDIF
699
700	!
701	!-- Listing of 1D-profiles
702	WRITE ( io, 325 ) dt_dopr_listing
703	IF ( averaging_interval_pr /= 0.0 ) THEN
704	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
705	ENDIF
706
707	!
708	!-- DATA output
709	WRITE ( io, 330 )
710	IF ( averaging_interval_pr /= 0.0 ) THEN
711	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
712	ENDIF
713
714	!
715	!-- 1D-profiles
716	dopr_chr = 'Profile:'
717	IF ( dopr_n /= 0 ) THEN
718	WRITE ( io, 331 )
719
720	output_format = ''
721	IF ( netcdf_output ) THEN
722	IF ( netcdf_data_format == 1 ) THEN
723	output_format = 'NetCDF classic'
724	ELSE
725	output_format = 'NetCDF 64bit offset'
726	ENDIF
727	ENDIF
728	IF ( profil_output ) THEN
729	IF ( netcdf_output ) THEN
730	output_format = TRIM( output_format ) // ' and profil'
731	ELSE
732	output_format = 'profil'
733	ENDIF
734	ENDIF
735	WRITE ( io, 344 ) output_format
736
737	DO i = 1, dopr_n
738	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
739	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
740	WRITE ( io, 332 ) dopr_chr
741	dopr_chr = ' :'
742	ENDIF
743	ENDDO
744
745	IF ( dopr_chr /= '' ) THEN
746	WRITE ( io, 332 ) dopr_chr
747	ENDIF
748	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
749	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
750	ENDIF
751
752	!
753	!-- 2D-arrays
754	DO av = 0, 1
755
756	i = 1
757	do2d_xy = ''
758	do2d_xz = ''
759	do2d_yz = ''
760	DO WHILE ( do2d(av,i) /= ' ' )
761
762	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
763	do2d_mode = do2d(av,i)(l-1:l)
764
765	SELECT CASE ( do2d_mode )
766	CASE ( 'xy' )
767	ll = LEN_TRIM( do2d_xy )
768	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
769	CASE ( 'xz' )
770	ll = LEN_TRIM( do2d_xz )
771	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
772	CASE ( 'yz' )
773	ll = LEN_TRIM( do2d_yz )
774	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
775	END SELECT
776
777	i = i + 1
778
779	ENDDO
780
781	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
782	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
783	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
784	( netcdf_output .OR. iso2d_output ) ) THEN
785
786	IF ( av == 0 ) THEN
787	WRITE ( io, 334 ) ''
788	ELSE
789	WRITE ( io, 334 ) '(time-averaged)'
790	ENDIF
791
792	IF ( do2d_at_begin ) THEN
793	begin_chr = 'and at the start'
794	ELSE
795	begin_chr = ''
796	ENDIF
797
798	output_format = ''
799	IF ( netcdf_output ) THEN
800	IF ( netcdf_data_format == 1 ) THEN
801	output_format = 'NetCDF classic'
802	ELSEIF ( netcdf_data_format == 2 ) THEN
803	output_format = 'NetCDF 64bit offset'
804	ELSEIF ( netcdf_data_format == 3 ) THEN
805	output_format = 'NetCDF4/HDF5'
806	ELSEIF ( netcdf_data_format == 4 ) THEN
807	output_format = 'NetCDF4/HDF5 clasic'
808	ENDIF
809	ENDIF
810	IF ( iso2d_output ) THEN
811	IF ( netcdf_output ) THEN
812	output_format = TRIM( output_format ) // ' and iso2d'
813	ELSE
814	output_format = 'iso2d'
815	ENDIF
816	ENDIF
817	WRITE ( io, 344 ) output_format
818
819	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
820	i = 1
821	slices = '/'
822	coordinates = '/'
823	!
824	!-- Building strings with index and coordinate informations of the
825	!-- slices
826	DO WHILE ( section(i,1) /= -9999 )
827
828	WRITE (section_chr,'(I5)') section(i,1)
829	section_chr = ADJUSTL( section_chr )
830	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
831
832	IF ( section(i,1) == -1 ) THEN
833	WRITE (coor_chr,'(F10.1)') -1.0
834	ELSE
835	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
836	ENDIF
837	coor_chr = ADJUSTL( coor_chr )
838	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
839
840	i = i + 1
841	ENDDO
842	IF ( av == 0 ) THEN
843	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
844	TRIM( begin_chr ), 'k', TRIM( slices ), &
845	TRIM( coordinates )
846	IF ( skip_time_do2d_xy /= 0.0 ) THEN
847	WRITE ( io, 339 ) skip_time_do2d_xy
848	ENDIF
849	ELSE
850	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
851	TRIM( begin_chr ), averaging_interval, &
852	dt_averaging_input, 'k', TRIM( slices ), &
853	TRIM( coordinates )
854	IF ( skip_time_data_output_av /= 0.0 ) THEN
855	WRITE ( io, 339 ) skip_time_data_output_av
856	ENDIF
857	ENDIF
858
859	ENDIF
860
861	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
862	i = 1
863	slices = '/'
864	coordinates = '/'
865	!
866	!-- Building strings with index and coordinate informations of the
867	!-- slices
868	DO WHILE ( section(i,2) /= -9999 )
869
870	WRITE (section_chr,'(I5)') section(i,2)
871	section_chr = ADJUSTL( section_chr )
872	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
873
874	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
875	coor_chr = ADJUSTL( coor_chr )
876	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
877
878	i = i + 1
879	ENDDO
880	IF ( av == 0 ) THEN
881	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
882	TRIM( begin_chr ), 'j', TRIM( slices ), &
883	TRIM( coordinates )
884	IF ( skip_time_do2d_xz /= 0.0 ) THEN
885	WRITE ( io, 339 ) skip_time_do2d_xz
886	ENDIF
887	ELSE
888	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
889	TRIM( begin_chr ), averaging_interval, &
890	dt_averaging_input, 'j', TRIM( slices ), &
891	TRIM( coordinates )
892	IF ( skip_time_data_output_av /= 0.0 ) THEN
893	WRITE ( io, 339 ) skip_time_data_output_av
894	ENDIF
895	ENDIF
896	ENDIF
897
898	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
899	i = 1
900	slices = '/'
901	coordinates = '/'
902	!
903	!-- Building strings with index and coordinate informations of the
904	!-- slices
905	DO WHILE ( section(i,3) /= -9999 )
906
907	WRITE (section_chr,'(I5)') section(i,3)
908	section_chr = ADJUSTL( section_chr )
909	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
910
911	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
912	coor_chr = ADJUSTL( coor_chr )
913	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
914
915	i = i + 1
916	ENDDO
917	IF ( av == 0 ) THEN
918	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
919	TRIM( begin_chr ), 'i', TRIM( slices ), &
920	TRIM( coordinates )
921	IF ( skip_time_do2d_yz /= 0.0 ) THEN
922	WRITE ( io, 339 ) skip_time_do2d_yz
923	ENDIF
924	ELSE
925	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
926	TRIM( begin_chr ), averaging_interval, &
927	dt_averaging_input, 'i', TRIM( slices ), &
928	TRIM( coordinates )
929	IF ( skip_time_data_output_av /= 0.0 ) THEN
930	WRITE ( io, 339 ) skip_time_data_output_av
931	ENDIF
932	ENDIF
933	ENDIF
934
935	ENDIF
936
937	ENDDO
938
939	!
940	!-- 3d-arrays
941	DO av = 0, 1
942
943	i = 1
944	do3d_chr = ''
945	DO WHILE ( do3d(av,i) /= ' ' )
946
947	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
948	i = i + 1
949
950	ENDDO
951
952	IF ( do3d_chr /= '' ) THEN
953	IF ( av == 0 ) THEN
954	WRITE ( io, 336 ) ''
955	ELSE
956	WRITE ( io, 336 ) '(time-averaged)'
957	ENDIF
958
959	output_format = ''
960	IF ( netcdf_output ) THEN
961	IF ( netcdf_data_format == 1 ) THEN
962	output_format = 'NetCDF classic'
963	ELSEIF ( netcdf_data_format == 2 ) THEN
964	output_format = 'NetCDF 64bit offset'
965	ELSEIF ( netcdf_data_format == 3 ) THEN
966	output_format = 'NetCDF4/HDF5'
967	ELSEIF ( netcdf_data_format == 4 ) THEN
968	output_format = 'NetCDF4/HDF5 clasic'
969	ENDIF
970	ENDIF
971	IF ( avs_output ) THEN
972	IF ( netcdf_output ) THEN
973	output_format = TRIM( output_format ) // ' and avs'
974	ELSE
975	output_format = 'avs'
976	ENDIF
977	ENDIF
978	WRITE ( io, 344 ) output_format
979
980	IF ( do3d_at_begin ) THEN
981	begin_chr = 'and at the start'
982	ELSE
983	begin_chr = ''
984	ENDIF
985	IF ( av == 0 ) THEN
986	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
987	zu(nz_do3d), nz_do3d
988	ELSE
989	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
990	TRIM( begin_chr ), averaging_interval, &
991	dt_averaging_input, zu(nz_do3d), nz_do3d
992	ENDIF
993
994	IF ( do3d_compress ) THEN
995	do3d_chr = ''
996	i = 1
997	DO WHILE ( do3d(av,i) /= ' ' )
998
999	SELECT CASE ( do3d(av,i) )
1000	CASE ( 'u' )
1001	j = 1
1002	CASE ( 'v' )
1003	j = 2
1004	CASE ( 'w' )
1005	j = 3
1006	CASE ( 'p' )
1007	j = 4
1008	CASE ( 'pt' )
1009	j = 5
1010	END SELECT
1011	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1012	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1013	':' // prec // ','
1014	i = i + 1
1015
1016	ENDDO
1017	WRITE ( io, 338 ) do3d_chr
1018
1019	ENDIF
1020
1021	IF ( av == 0 ) THEN
1022	IF ( skip_time_do3d /= 0.0 ) THEN
1023	WRITE ( io, 339 ) skip_time_do3d
1024	ENDIF
1025	ELSE
1026	IF ( skip_time_data_output_av /= 0.0 ) THEN
1027	WRITE ( io, 339 ) skip_time_data_output_av
1028	ENDIF
1029	ENDIF
1030
1031	ENDIF
1032
1033	ENDDO
1034
1035	!
1036	!-- masked arrays
1037	IF ( masks > 0 ) WRITE ( io, 345 ) &
1038	mask_scale_x, mask_scale_y, mask_scale_z
1039	DO mid = 1, masks
1040	DO av = 0, 1
1041
1042	i = 1
1043	domask_chr = ''
1044	DO WHILE ( domask(mid,av,i) /= ' ' )
1045	domask_chr = TRIM( domask_chr ) // ' ' // &
1046	TRIM( domask(mid,av,i) ) // ','
1047	i = i + 1
1048	ENDDO
1049
1050	IF ( domask_chr /= '' ) THEN
1051	IF ( av == 0 ) THEN
1052	WRITE ( io, 346 ) '', mid
1053	ELSE
1054	WRITE ( io, 346 ) ' (time-averaged)', mid
1055	ENDIF
1056
1057	output_format = ''
1058	IF ( netcdf_output ) THEN
1059	IF ( netcdf_data_format == 1 ) THEN
1060	output_format = 'NetCDF classic'
1061	ELSEIF ( netcdf_data_format == 2 ) THEN
1062	output_format = 'NetCDF 64bit offset'
1063	ELSEIF ( netcdf_data_format == 3 ) THEN
1064	output_format = 'NetCDF4/HDF5'
1065	ELSEIF ( netcdf_data_format == 4 ) THEN
1066	output_format = 'NetCDF4/HDF5 clasic'
1067	ENDIF
1068	ENDIF
1069	WRITE ( io, 344 ) output_format
1070
1071	IF ( av == 0 ) THEN
1072	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1073	ELSE
1074	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1075	averaging_interval, dt_averaging_input
1076	ENDIF
1077
1078	IF ( av == 0 ) THEN
1079	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1080	WRITE ( io, 339 ) skip_time_domask(mid)
1081	ENDIF
1082	ELSE
1083	IF ( skip_time_data_output_av /= 0.0 ) THEN
1084	WRITE ( io, 339 ) skip_time_data_output_av
1085	ENDIF
1086	ENDIF
1087	!
1088	!-- output locations
1089	DO dim = 1, 3
1090	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1091	count = 0
1092	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1093	count = count + 1
1094	ENDDO
1095	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1096	mask(mid,dim,:count)
1097	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1098	mask_loop(mid,dim,2) < 0.0 .AND. &
1099	mask_loop(mid,dim,3) == 0.0 ) THEN
1100	WRITE ( io, 350 ) dir(dim), dir(dim)
1101	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1102	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1103	mask_loop(mid,dim,1:2)
1104	ELSE
1105	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1106	mask_loop(mid,dim,1:3)
1107	ENDIF
1108	ENDDO
1109	ENDIF
1110
1111	ENDDO
1112	ENDDO
1113
1114	!
1115	!-- Timeseries
1116	IF ( dt_dots /= 9999999.9 ) THEN
1117	WRITE ( io, 340 )
1118
1119	output_format = ''
1120	IF ( netcdf_output ) THEN
1121	IF ( netcdf_data_format == 1 ) THEN
1122	output_format = 'NetCDF classic'
1123	ELSE
1124	output_format = 'NetCDF 64bit offset'
1125	ENDIF
1126	ENDIF
1127	IF ( profil_output ) THEN
1128	IF ( netcdf_output ) THEN
1129	output_format = TRIM( output_format ) // ' and profil'
1130	ELSE
1131	output_format = 'profil'
1132	ENDIF
1133	ENDIF
1134	WRITE ( io, 344 ) output_format
1135	WRITE ( io, 341 ) dt_dots
1136	ENDIF
1137
1138	#if defined( __dvrp_graphics )
1139	!
1140	!-- Dvrp-output
1141	IF ( dt_dvrp /= 9999999.9 ) THEN
1142	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1143	TRIM( dvrp_username ), TRIM( dvrp_directory )
1144	i = 1
1145	l = 0
1146	m = 0
1147	DO WHILE ( mode_dvrp(i) /= ' ' )
1148	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1149	READ ( mode_dvrp(i), '(10X,I2)' ) j
1150	l = l + 1
1151	IF ( do3d(0,j) /= ' ' ) THEN
1152	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1153	isosurface_color(:,l)
1154	ENDIF
1155	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1156	READ ( mode_dvrp(i), '(6X,I2)' ) j
1157	m = m + 1
1158	IF ( do2d(0,j) /= ' ' ) THEN
1159	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1160	slicer_range_limits_dvrp(:,m)
1161	ENDIF
1162	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1163	WRITE ( io, 363 ) dvrp_psize
1164	IF ( particle_dvrpsize /= 'none' ) THEN
1165	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1166	dvrpsize_interval
1167	ENDIF
1168	IF ( particle_color /= 'none' ) THEN
1169	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1170	color_interval
1171	ENDIF
1172	ENDIF
1173	i = i + 1
1174	ENDDO
1175
1176	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1177	superelevation_y, superelevation, clip_dvrp_l, &
1178	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1179
1180	IF ( TRIM( topography ) /= 'flat' ) THEN
1181	WRITE ( io, 366 ) topography_color
1182	IF ( cluster_size > 1 ) THEN
1183	WRITE ( io, 367 ) cluster_size
1184	ENDIF
1185	ENDIF
1186
1187	ENDIF
1188	#endif
1189
1190	#if defined( __spectra )
1191	!
1192	!-- Spectra output
1193	IF ( dt_dosp /= 9999999.9 ) THEN
1194	WRITE ( io, 370 )
1195
1196	output_format = ''
1197	IF ( netcdf_output ) THEN
1198	IF ( netcdf_data_format == 1 ) THEN
1199	output_format = 'NetCDF classic'
1200	ELSE
1201	output_format = 'NetCDF 64bit offset'
1202	ENDIF
1203	ENDIF
1204	IF ( profil_output ) THEN
1205	IF ( netcdf_output ) THEN
1206	output_format = TRIM( output_format ) // ' and profil'
1207	ELSE
1208	output_format = 'profil'
1209	ENDIF
1210	ENDIF
1211	WRITE ( io, 344 ) output_format
1212	WRITE ( io, 371 ) dt_dosp
1213	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1214	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1215	( spectra_direction(i), i = 1,10 ), &
1216	( comp_spectra_level(i), i = 1,100 ), &
1217	( plot_spectra_level(i), i = 1,100 ), &
1218	averaging_interval_sp, dt_averaging_input_pr
1219	ENDIF
1220	#endif
1221
1222	WRITE ( io, 99 )
1223
1224	!
1225	!-- Physical quantities
1226	WRITE ( io, 400 )
1227
1228	!
1229	!-- Geostrophic parameters
1230	WRITE ( io, 410 ) omega, phi, f, fs
1231
1232	!
1233	!-- Other quantities
1234	WRITE ( io, 411 ) g
1235	IF ( use_reference ) THEN
1236	IF ( ocean ) THEN
1237	WRITE ( io, 412 ) prho_reference
1238	ELSE
1239	WRITE ( io, 413 ) pt_reference
1240	ENDIF
1241	ENDIF
1242
1243	!
1244	!-- Cloud physics parameters
1245	IF ( cloud_physics ) THEN
1246	WRITE ( io, 415 )
1247	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1248	ENDIF
1249
1250	!-- Profile of the geostrophic wind (component ug)
1251	!-- Building output strings
1252	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1253	gradients = '------'
1254	slices = ' 0'
1255	coordinates = ' 0.0'
1256	i = 1
1257	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1258
1259	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1260	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1261
1262	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1263	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1264
1265	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1266	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1267
1268	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1269	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1270
1271	IF ( i == 10 ) THEN
1272	EXIT
1273	ELSE
1274	i = i + 1
1275	ENDIF
1276
1277	ENDDO
1278
1279	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1280	TRIM( gradients ), TRIM( slices )
1281
1282	!-- Profile of the geostrophic wind (component vg)
1283	!-- Building output strings
1284	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1285	gradients = '------'
1286	slices = ' 0'
1287	coordinates = ' 0.0'
1288	i = 1
1289	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1290
1291	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1292	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1293
1294	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1295	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1296
1297	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1298	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1299
1300	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1301	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1302
1303	IF ( i == 10 ) THEN
1304	EXIT
1305	ELSE
1306	i = i + 1
1307	ENDIF
1308
1309	ENDDO
1310
1311	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1312	TRIM( gradients ), TRIM( slices )
1313
1314	!
1315	!-- Initial temperature profile
1316	!-- Building output strings, starting with surface temperature
1317	WRITE ( temperatures, '(F6.2)' ) pt_surface
1318	gradients = '------'
1319	slices = ' 0'
1320	coordinates = ' 0.0'
1321	i = 1
1322	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1323
1324	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1325	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1326
1327	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1328	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1329
1330	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1331	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1332
1333	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1334	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1335
1336	IF ( i == 10 ) THEN
1337	EXIT
1338	ELSE
1339	i = i + 1
1340	ENDIF
1341
1342	ENDDO
1343
1344	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1345	TRIM( gradients ), TRIM( slices )
1346
1347	!
1348	!-- Initial humidity profile
1349	!-- Building output strings, starting with surface humidity
1350	IF ( humidity .OR. passive_scalar ) THEN
1351	WRITE ( temperatures, '(E8.1)' ) q_surface
1352	gradients = '--------'
1353	slices = ' 0'
1354	coordinates = ' 0.0'
1355	i = 1
1356	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1357
1358	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1359	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1360
1361	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1362	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1363
1364	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1365	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1366
1367	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1368	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1369
1370	IF ( i == 10 ) THEN
1371	EXIT
1372	ELSE
1373	i = i + 1
1374	ENDIF
1375
1376	ENDDO
1377
1378	IF ( humidity ) THEN
1379	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1380	TRIM( gradients ), TRIM( slices )
1381	ELSE
1382	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1383	TRIM( gradients ), TRIM( slices )
1384	ENDIF
1385	ENDIF
1386
1387	!
1388	!-- Initial salinity profile
1389	!-- Building output strings, starting with surface salinity
1390	IF ( ocean ) THEN
1391	WRITE ( temperatures, '(F6.2)' ) sa_surface
1392	gradients = '------'
1393	slices = ' 0'
1394	coordinates = ' 0.0'
1395	i = 1
1396	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1397
1398	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1399	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1400
1401	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1402	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1403
1404	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1405	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1406
1407	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1408	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1409
1410	IF ( i == 10 ) THEN
1411	EXIT
1412	ELSE
1413	i = i + 1
1414	ENDIF
1415
1416	ENDDO
1417
1418	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1419	TRIM( gradients ), TRIM( slices )
1420	ENDIF
1421
1422	!
1423	!-- Profile for the large scale vertial velocity
1424	!-- Building output strings, starting with surface value
1425	IF ( large_scale_subsidence ) THEN
1426	temperatures = ' 0.0'
1427	gradients = '------'
1428	slices = ' 0'
1429	coordinates = ' 0.0'
1430	i = 1
1431	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1432
1433	WRITE (coor_chr,'(E10.2,7X)') &
1434	w_subs(subs_vertical_gradient_level_i(i))
1435	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1436
1437	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1438	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1439
1440	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1441	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1442
1443	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1444	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1445
1446	IF ( i == 10 ) THEN
1447	EXIT
1448	ELSE
1449	i = i + 1
1450	ENDIF
1451
1452	ENDDO
1453
1454	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1455	TRIM( gradients ), TRIM( slices )
1456	ENDIF
1457
1458	!
1459	!-- LES / turbulence parameters
1460	WRITE ( io, 450 )
1461
1462	!--
1463	! ... LES-constants used must still be added here
1464	!--
1465	IF ( constant_diffusion ) THEN
1466	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1467	prandtl_number
1468	ENDIF
1469	IF ( .NOT. constant_diffusion) THEN
1470	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1471	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1472	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1473	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1474	ENDIF
1475
1476	!
1477	!-- Special actions during the run
1478	WRITE ( io, 470 )
1479	IF ( create_disturbances ) THEN
1480	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1481	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1482	zu(disturbance_level_ind_t), disturbance_level_ind_t
1483	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1484	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1485	ELSE
1486	WRITE ( io, 473 ) disturbance_energy_limit
1487	ENDIF
1488	WRITE ( io, 474 ) TRIM( random_generator )
1489	ENDIF
1490	IF ( pt_surface_initial_change /= 0.0 ) THEN
1491	WRITE ( io, 475 ) pt_surface_initial_change
1492	ENDIF
1493	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1494	WRITE ( io, 476 ) q_surface_initial_change
1495	ENDIF
1496	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1497	WRITE ( io, 477 ) q_surface_initial_change
1498	ENDIF
1499
1500	IF ( particle_advection ) THEN
1501	!
1502	!-- Particle attributes
1503	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1504	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1505	end_time_prel, dt_sort_particles
1506	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1507	IF ( random_start_position ) WRITE ( io, 481 )
1508	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1509	WRITE ( io, 495 ) total_number_of_particles
1510	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1511	WRITE ( io, 483 ) maximum_number_of_tailpoints
1512	IF ( minimum_tailpoint_distance /= 0 ) THEN
1513	WRITE ( io, 484 ) total_number_of_tails, &
1514	minimum_tailpoint_distance, &
1515	maximum_tailpoint_age
1516	ENDIF
1517	ENDIF
1518	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1519	WRITE ( io, 485 ) dt_write_particle_data
1520	output_format = ''
1521	IF ( netcdf_output ) THEN
1522	IF ( netcdf_data_format > 1 ) THEN
1523	output_format = 'netcdf (64 bit offset) and binary'
1524	ELSE
1525	output_format = 'netcdf and binary'
1526	ENDIF
1527	ELSE
1528	output_format = 'binary'
1529	ENDIF
1530	WRITE ( io, 344 ) output_format
1531	ENDIF
1532	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1533	IF ( write_particle_statistics ) WRITE ( io, 486 )
1534
1535	WRITE ( io, 487 ) number_of_particle_groups
1536
1537	DO i = 1, number_of_particle_groups
1538	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1539	WRITE ( io, 490 ) i, 0.0
1540	WRITE ( io, 492 )
1541	ELSE
1542	WRITE ( io, 490 ) i, radius(i)
1543	IF ( density_ratio(i) /= 0.0 ) THEN
1544	WRITE ( io, 491 ) density_ratio(i)
1545	ELSE
1546	WRITE ( io, 492 )
1547	ENDIF
1548	ENDIF
1549	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1550	pdx(i), pdy(i), pdz(i)
1551	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1552	ENDDO
1553
1554	ENDIF
1555
1556
1557	!
1558	!-- Parameters of 1D-model
1559	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1560	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1561	mixing_length_1d, dissipation_1d
1562	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1563	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1564	ENDIF
1565	ENDIF
1566
1567	!
1568	!-- User-defined informations
1569	CALL user_header( io )
1570
1571	WRITE ( io, 99 )
1572
1573	!
1574	!-- Write buffer contents to disc immediately
1575	CALL local_flush( io )
1576
1577	!
1578	!-- Here the FORMATs start
1579
1580	99 FORMAT (1X,78('-'))
1581	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1582	1X,'* ',A,' *',9X,A/ &
1583	1X,'***************************',9X,42('-'))
1584	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1585	37X,42('-'))
1586	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1587	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1588	' Run on host: ',A10)
1589	#if defined( __parallel )
1590	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1591	')',1X,A)
1592	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1593	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1594	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1595	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1596	37X,'because the job is running on an SMP-cluster')
1597	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1598	#endif
1599	110 FORMAT (/' Numerical Schemes:'/ &
1600	' -----------------'/)
1601	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1602	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1603	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1604	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1605	' or Upstream')
1606	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1607	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1608	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1609	' or Upstream')
1610	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1611	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1612	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1613	' Translation velocity = ',A/ &
1614	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1615	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1616	' of timestep changes)')
1617	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1618	' timestep changes')
1619	122 FORMAT (' --> Time differencing scheme: ',A)
1620	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1621	' maximum damping coefficient: ',F5.3, ' 1/s')
1622	124 FORMAT (' Spline-overshoots are being suppressed')
1623	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1624	' of'/ &
1625	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1626	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1627	' of'/ &
1628	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1629	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1630	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1631	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1632	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1633	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1634	130 FORMAT (' --> Additional prognostic equation for the total water content')
1635	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1636	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1637	' effective emissivity scheme')
1638	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1639	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1640	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1641	A,'-cycle)'/ &
1642	' number of grid levels: ',I2/ &
1643	' Gauss-Seidel red/black iterations: ',I2)
1644	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1645	I3,')')
1646	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1647	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1648	I3,')'/ &
1649	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1650	I3,')')
1651	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1652	139 FORMAT (' --> Loop optimization method: ',A)
1653	140 FORMAT (' maximum residual allowed: ',E10.3)
1654	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1655	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1656	'step')
1657	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1658	'kinetic energy')
1659	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1660	'conserved'/ &
1661	' using the ',A,' mode')
1662	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1663	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1664	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1665	/' starting from dp_level_b =', F8.3, 'm', A /)
1666	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1667	'prognostic equation for')
1668	154 FORMAT (' the potential temperature')
1669	200 FORMAT (//' Run time and time step information:'/ &
1670	' ----------------------------------'/)
1671	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1672	' CFL-factor: ',F4.2)
1673	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1674	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1675	' End time: ',F9.3,' s')
1676	204 FORMAT ( A,F9.3,' s')
1677	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1678	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1679	' CPU-time used: ',F9.3,' s per timestep: ', &
1680	' ',F9.3,' s'/ &
1681	' per second of simulated tim', &
1682	'e: ',F9.3,' s')
1683	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1684	250 FORMAT (//' Computational grid and domain size:'/ &
1685	' ----------------------------------'// &
1686	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1687	' m dz = ',F7.3,' m'/ &
1688	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1689	' m z(u) = ',F10.3,' m'/)
1690	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1691	' factor: ',F5.3/ &
1692	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1693	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1694	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1695	255 FORMAT (' Subdomains have equal size')
1696	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1697	'have smaller sizes'/ &
1698	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1699	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1700	' degrees')
1701	270 FORMAT (//' Topography informations:'/ &
1702	' -----------------------'// &
1703	1X,'Topography: ',A)
1704	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1705	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1706	' / ',I4)
1707	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1708	' direction' / &
1709	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1710	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1711	278 FORMAT (' Topography grid definition convention:'/ &
1712	' cell edge (staggered grid points'/ &
1713	' (u in x-direction, v in y-direction))' /)
1714	279 FORMAT (' Topography grid definition convention:'/ &
1715	' cell center (scalar grid points)' /)
1716	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1717	' ------------------------------'// &
1718	' Canopy mode: ', A / &
1719	' Canopy top: ',I4 / &
1720	' Leaf drag coefficient: ',F6.2 /)
1721	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1722	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1723	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1724	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1725	' Height: ',A,' m'/ &
1726	' Leaf area density: ',A,' m2/m3'/ &
1727	' Gradient: ',A,' m2/m4'/ &
1728	' Gridpoint: ',A)
1729
1730	300 FORMAT (//' Boundary conditions:'/ &
1731	' -------------------'// &
1732	' p uv ', &
1733	' pt'// &
1734	' B. bound.: ',A/ &
1735	' T. bound.: ',A)
1736	301 FORMAT (/' ',A// &
1737	' B. bound.: ',A/ &
1738	' T. bound.: ',A)
1739	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1740	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1741	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1742	'computational u,v-level:'// &
1743	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1744	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1745	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1746	307 FORMAT (' Heatflux has a random normal distribution')
1747	308 FORMAT (' Predefined surface temperature')
1748	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1749	310 FORMAT (//' 1D-Model:'// &
1750	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1751	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1752	312 FORMAT (' Predefined surface humidity')
1753	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1754	314 FORMAT (' Predefined scalar value at the surface')
1755	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1756	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1757	'atmosphere model')
1758	317 FORMAT (//' Lateral boundaries:'/ &
1759	' left/right: ',A/ &
1760	' north/south: ',A)
1761	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1762	'max =',F5.1,' m**2/s')
1763	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1764	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1765	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1766	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1767	' v: ',F9.6,' m2/s2')
1768	325 FORMAT (//' List output:'/ &
1769	' -----------'// &
1770	' 1D-Profiles:'/ &
1771	' Output every ',F8.2,' s')
1772	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1773	' Averaging input every ',F8.2,' s')
1774	330 FORMAT (//' Data output:'/ &
1775	' -----------'/)
1776	331 FORMAT (/' 1D-Profiles:')
1777	332 FORMAT (/' ',A)
1778	333 FORMAT (' Output every ',F8.2,' s',/ &
1779	' Time averaged over ',F8.2,' s'/ &
1780	' Averaging input every ',F8.2,' s')
1781	334 FORMAT (/' 2D-Arrays',A,':')
1782	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1783	' Output every ',F8.2,' s ',A/ &
1784	' Cross sections at ',A1,' = ',A/ &
1785	' scalar-coordinates: ',A,' m'/)
1786	336 FORMAT (/' 3D-Arrays',A,':')
1787	337 FORMAT (/' Arrays: ',A/ &
1788	' Output every ',F8.2,' s ',A/ &
1789	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1790	338 FORMAT (' Compressed data output'/ &
1791	' Decimal precision: ',A/)
1792	339 FORMAT (' No output during initial ',F8.2,' s')
1793	340 FORMAT (/' Time series:')
1794	341 FORMAT (' Output every ',F8.2,' s'/)
1795	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1796	' Output every ',F8.2,' s ',A/ &
1797	' Time averaged over ',F8.2,' s'/ &
1798	' Averaging input every ',F8.2,' s'/ &
1799	' Cross sections at ',A1,' = ',A/ &
1800	' scalar-coordinates: ',A,' m'/)
1801	343 FORMAT (/' Arrays: ',A/ &
1802	' Output every ',F8.2,' s ',A/ &
1803	' Time averaged over ',F8.2,' s'/ &
1804	' Averaging input every ',F8.2,' s'/ &
1805	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1806	344 FORMAT (' Output format: ',A/)
1807	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1808	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1809	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1810	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1811	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1812	347 FORMAT (' Variables: ',A/ &
1813	' Output every ',F8.2,' s')
1814	348 FORMAT (' Variables: ',A/ &
1815	' Output every ',F8.2,' s'/ &
1816	' Time averaged over ',F8.2,' s'/ &
1817	' Averaging input every ',F8.2,' s')
1818	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1819	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1820	13(' ',8(F8.2,',')/) )
1821	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1822	'all gridpoints along ',A,'-direction (default).' )
1823	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1824	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1825	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1826	#if defined( __dvrp_graphics )
1827	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1828	' Output every ',F7.1,' s'/ &
1829	' Output mode: ',A/ &
1830	' Host / User: ',A,' / ',A/ &
1831	' Directory: ',A// &
1832	' The sequence contains:')
1833	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1834	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1835	362 FORMAT (/' Slicer plane ',A/ &
1836	' Slicer limits: [',F6.2,',',F6.2,']')
1837	363 FORMAT (/' Particles'/ &
1838	' particle size: ',F7.2,' m')
1839	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1840	F6.2,',',F6.2,']')
1841	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1842	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1843	')'/ &
1844	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1845	' from y = ',F9.1,' m to y = ',F9.1,' m')
1846	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1847	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1848	#endif
1849	#if defined( __spectra )
1850	370 FORMAT (' Spectra:')
1851	371 FORMAT (' Output every ',F7.1,' s'/)
1852	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1853	' Directions: ', 10(A5,',')/ &
1854	' height levels k = ', 20(I3,',')/ &
1855	' ', 20(I3,',')/ &
1856	' ', 20(I3,',')/ &
1857	' ', 20(I3,',')/ &
1858	' ', 19(I3,','),I3,'.'/ &
1859	' height levels selected for standard plot:'/ &
1860	' k = ', 20(I3,',')/ &
1861	' ', 20(I3,',')/ &
1862	' ', 20(I3,',')/ &
1863	' ', 20(I3,',')/ &
1864	' ', 19(I3,','),I3,'.'/ &
1865	' Time averaged over ', F7.1, ' s,' / &
1866	' Profiles for the time averaging are taken every ', &
1867	F6.1,' s')
1868	#endif
1869	400 FORMAT (//' Physical quantities:'/ &
1870	' -------------------'/)
1871	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1872	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1873	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1874	' f* = ',F9.6,' 1/s')
1875	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1876	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1877	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1878	415 FORMAT (/' Cloud physics parameters:'/ &
1879	' ------------------------'/)
1880	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1881	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1882	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1883	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1884	' Vapourization heat : L_v = ',E8.2,' J/kg')
1885	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1886	' Height: ',A,' m'/ &
1887	' Temperature: ',A,' K'/ &
1888	' Gradient: ',A,' K/100m'/ &
1889	' Gridpoint: ',A)
1890	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1891	' Height: ',A,' m'/ &
1892	' Humidity: ',A,' kg/kg'/ &
1893	' Gradient: ',A,' (kg/kg)/100m'/ &
1894	' Gridpoint: ',A)
1895	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1896	' Height: ',A,' m'/ &
1897	' Scalar concentration: ',A,' kg/m**3'/ &
1898	' Gradient: ',A,' (kg/m**3)/100m'/ &
1899	' Gridpoint: ',A)
1900	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1901	' Height: ',A,' m'/ &
1902	' ug: ',A,' m/s'/ &
1903	' Gradient: ',A,' 1/100s'/ &
1904	' Gridpoint: ',A)
1905	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1906	' Height: ',A,' m'/ &
1907	' vg: ',A,' m/s'/ &
1908	' Gradient: ',A,' 1/100s'/ &
1909	' Gridpoint: ',A)
1910	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1911	' Height: ',A,' m'/ &
1912	' Salinity: ',A,' psu'/ &
1913	' Gradient: ',A,' psu/100m'/ &
1914	' Gridpoint: ',A)
1915	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1916	' Height: ',A,' m'/ &
1917	' w_subs: ',A,' m/s'/ &
1918	' Gradient: ',A,' (m/s)/100m'/ &
1919	' Gridpoint: ',A)
1920	450 FORMAT (//' LES / Turbulence quantities:'/ &
1921	' ---------------------------'/)
1922	451 FORMAT (' Diffusion coefficients are constant:'/ &
1923	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1924	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1925	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1926	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1927	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1928	470 FORMAT (//' Actions during the simulation:'/ &
1929	' -----------------------------'/)
1930	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1931	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1932	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1933	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1934	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1935	' to i/j =',I4)
1936	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1937	1X,F5.3, ' m2/s2')
1938	474 FORMAT (' Random number generator used : ',A/)
1939	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1940	'respectively, if'/ &
1941	' the value is negative) by ',F5.2,' K at the beginning of the',&
1942	' 3D-simulation'/)
1943	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1944	'respectively, if the'/ &
1945	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1946	' the 3D-simulation'/)
1947	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1948	'respectively, if the'/ &
1949	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1950	' the 3D-simulation'/)
1951	480 FORMAT (' Particles:'/ &
1952	' ---------'// &
1953	' Particle advection is active (switched on at t = ', F7.1, &
1954	' s)'/ &
1955	' Start of new particle generations every ',F6.1,' s'/ &
1956	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1957	' bottom: ', A, ' top: ', A/&
1958	' Maximum particle age: ',F9.1,' s'/ &
1959	' Advection stopped at t = ',F9.1,' s'/ &
1960	' Particles are sorted every ',F9.1,' s'/)
1961	481 FORMAT (' Particles have random start positions'/)
1962	482 FORMAT (' Particles are advected only horizontally'/)
1963	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1964	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1965	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1966	' Maximum age of the end of the tail: ',F8.2,' s')
1967	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1968	486 FORMAT (' Particle statistics are written on file'/)
1969	487 FORMAT (' Number of particle groups: ',I2/)
1970	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1971	' minimum timestep for advection: ', F7.5/)
1972	489 FORMAT (' Number of particles simultaneously released at each ', &
1973	'point: ', I5/)
1974	490 FORMAT (' Particle group ',I2,':'/ &
1975	' Particle radius: ',E10.3, 'm')
1976	491 FORMAT (' Particle inertia is activated'/ &
1977	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1978	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1979	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1980	' y:',F8.1,' - ',F8.1,' m'/&
1981	' z:',F8.1,' - ',F8.1,' m'/&
1982	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1983	' m dz = ',F8.1,' m'/)
1984	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1985	F8.2,' s'/)
1986	495 FORMAT (' Number of particles in total domain: ',I10/)
1987	500 FORMAT (//' 1D-Model parameters:'/ &
1988	' -------------------'// &
1989	' Simulation time: ',F8.1,' s'/ &
1990	' Run-controll output every: ',F8.1,' s'/ &
1991	' Vertical profile output every: ',F8.1,' s'/ &
1992	' Mixing length calculation: ',A/ &
1993	' Dissipation calculation: ',A/)
1994	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1995	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
1996	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
1997
1998
1999	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |