Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 559

Last change on this file since 559 was 494, checked in by raasch, 15 years ago
last commit documented; configuration example file for netcdf4 added
Property svn:keywords set to `Id`
File size: 76.3 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 494 2010-03-01 12:23:32Z weinreis $
11	!
12	! 493 2010-03-01 08:30:24Z raasch
13	! NetCDF data output format extendend for NetCDF4/HDF5
14	!
15	! 449 2010-02-02 11:23:59Z raasch
16	! +large scale vertical motion (subsidence/ascent)
17	! Bugfix: index problem concerning gradient_level indices removed
18	!
19	! 410 2009-12-04 17:05:40Z letzel
20	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
21	! mask_scale\|_x\|y\|z, masks, skip_time_domask
22	!
23	! 346 2009-07-06 10:13:41Z raasch
24	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
25	! Coupling with independent precursor runs.
26	! Output of messages replaced by message handling routine.
27	! Output of several additional dvr parameters
28	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
29	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
30	! dp_smooth, dpdxy, u_bulk, v_bulk
31	! topography_grid_convention moved from user_header
32	! small bugfix concerning 3d 64bit netcdf output format
33	!
34	! 206 2008-10-13 14:59:11Z raasch
35	! Bugfix: error in zu index in case of section_xy = -1
36	!
37	! 198 2008-09-17 08:55:28Z raasch
38	! Format adjustments allowing output of larger revision numbers
39	!
40	! 197 2008-09-16 15:29:03Z raasch
41	! allow 100 spectra levels instead of 10 for consistency with
42	! define_netcdf_header,
43	! bugfix in the output of the characteristic levels of potential temperature,
44	! geostrophic wind, scalar concentration, humidity and leaf area density,
45	! output of turbulence recycling informations
46	!
47	! 138 2007-11-28 10:03:58Z letzel
48	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
49	! Allow two instead of one digit to specify isosurface and slicer variables.
50	! Output of sorting frequency of particles
51	!
52	! 108 2007-08-24 15:10:38Z letzel
53	! Output of informations for coupled model runs (boundary conditions etc.)
54	! + output of momentumfluxes at the top boundary
55	! Rayleigh damping for ocean, e_init
56	!
57	! 97 2007-06-21 08:23:15Z raasch
58	! Adjustments for the ocean version.
59	! use_pt_reference renamed use_reference
60	!
61	! 87 2007-05-22 15:46:47Z raasch
62	! Bugfix: output of use_upstream_for_tke
63	!
64	! 82 2007-04-16 15:40:52Z raasch
65	! Preprocessor strings for different linux clusters changed to "lc",
66	! routine local_flush is used for buffer flushing
67	!
68	! 76 2007-03-29 00:58:32Z raasch
69	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
70	! output of the loop optimization method, moisture renamed humidity,
71	! output of subversion revision number
72	!
73	! 19 2007-02-23 04:53:48Z raasch
74	! Output of scalar flux applied at top boundary
75	!
76	! RCS Log replace by Id keyword, revision history cleaned up
77	!
78	! Revision 1.63 2006/08/22 13:53:13 raasch
79	! Output of dz_max
80	!
81	! Revision 1.1 1997/08/11 06:17:20 raasch
82	! Initial revision
83	!
84	!
85	! Description:
86	! ------------
87	! Writing a header with all important informations about the actual run.
88	! This subroutine is called three times, two times at the beginning
89	! (writing information on files RUN_CONTROL and HEADER) and one time at the
90	! end of the run, then writing additional information about CPU-usage on file
91	! header.
92	!-----------------------------------------------------------------------------!
93
94	USE arrays_3d
95	USE control_parameters
96	USE cloud_parameters
97	USE cpulog
98	USE dvrp_variables
99	USE grid_variables
100	USE indices
101	USE model_1d
102	USE particle_attributes
103	USE pegrid
104	USE subsidence_mod
105	USE spectrum
106
107	IMPLICIT NONE
108
109	CHARACTER (LEN=1) :: prec
110	CHARACTER (LEN=2) :: do2d_mode
111	CHARACTER (LEN=5) :: section_chr
112	CHARACTER (LEN=9) :: time_to_string
113	CHARACTER (LEN=10) :: coor_chr, host_chr
114	CHARACTER (LEN=16) :: begin_chr
115	CHARACTER (LEN=23) :: ver_rev
116	CHARACTER (LEN=40) :: output_format
117	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
118	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
119	domask_chr, run_classification
120	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
121	temperatures, ugcomponent, vgcomponent
122	CHARACTER (LEN=85) :: roben, runten
123
124	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
125
126	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
127	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
128	REAL :: cpuseconds_per_simulated_second
129
130	!
131	!-- Open the output file. At the end of the simulation, output is directed
132	!-- to unit 19.
133	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
134	.NOT. simulated_time_at_begin /= simulated_time ) THEN
135	io = 15 ! header output on file RUN_CONTROL
136	ELSE
137	io = 19 ! header output on file HEADER
138	ENDIF
139	CALL check_open( io )
140
141	!
142	!-- At the end of the run, output file (HEADER) will be rewritten with
143	!-- new informations
144	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
145
146	!
147	!-- Determine kind of model run
148	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
149	run_classification = '3D - restart run'
150	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
151	run_classification = '3D - run with cyclic fill of 3D - prerun data'
152	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
153	run_classification = '3D - run without 1D - prerun'
154	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
155	run_classification = '3D - run with 1D - prerun'
156	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
157	run_classification = '3D - run initialized by user'
158	ELSE
159	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
160	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
161	ENDIF
162	IF ( ocean ) THEN
163	run_classification = 'ocean - ' // run_classification
164	ELSE
165	run_classification = 'atmosphere - ' // run_classification
166	ENDIF
167
168	!
169	!-- Run-identification, date, time, host
170	host_chr = host(1:10)
171	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
172	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
173	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
174	#if defined( __mpi2 )
175	mpi_type = 2
176	#else
177	mpi_type = 1
178	#endif
179	WRITE ( io, 101 ) mpi_type, coupling_mode
180	ENDIF
181	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
182	ADJUSTR( host_chr )
183	#if defined( __parallel )
184	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
185	char1 = 'calculated'
186	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
187	host(1:2) == 'lc' ) .AND. &
188	npex == -1 .AND. pdims(2) == 1 ) THEN
189	char1 = 'forced'
190	ELSE
191	char1 = 'predefined'
192	ENDIF
193	IF ( threads_per_task == 1 ) THEN
194	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
195	ELSE
196	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
197	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
198	ENDIF
199	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
200	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
201	npex == -1 .AND. pdims(2) == 1 ) &
202	THEN
203	WRITE ( io, 106 )
204	ELSEIF ( pdims(2) == 1 ) THEN
205	WRITE ( io, 107 ) 'x'
206	ELSEIF ( pdims(1) == 1 ) THEN
207	WRITE ( io, 107 ) 'y'
208	ENDIF
209	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
210	#endif
211	WRITE ( io, 99 )
212
213	!
214	!-- Numerical schemes
215	WRITE ( io, 110 )
216	IF ( psolver(1:7) == 'poisfft' ) THEN
217	WRITE ( io, 111 ) TRIM( fft_method )
218	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
219	ELSEIF ( psolver == 'sor' ) THEN
220	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
221	ELSEIF ( psolver == 'multigrid' ) THEN
222	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
223	IF ( mg_cycles == -1 ) THEN
224	WRITE ( io, 140 ) residual_limit
225	ELSE
226	WRITE ( io, 141 ) mg_cycles
227	ENDIF
228	IF ( mg_switch_to_pe0_level == 0 ) THEN
229	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
230	nzt_mg(1)
231	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
232	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
233	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
234	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
235	nzt_mg(mg_switch_to_pe0_level), &
236	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
237	nzt_mg(1)
238	ENDIF
239	ENDIF
240	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
241	THEN
242	WRITE ( io, 142 )
243	ENDIF
244
245	IF ( momentum_advec == 'pw-scheme' ) THEN
246	WRITE ( io, 113 )
247	ELSE
248	WRITE ( io, 114 )
249	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
250	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
251	overshoot_limit_w /= 0.0 ) THEN
252	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
253	overshoot_limit_w
254	ENDIF
255	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
256	ups_limit_w /= 0.0 ) &
257	THEN
258	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
259	ENDIF
260	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
261	ENDIF
262	IF ( scalar_advec == 'pw-scheme' ) THEN
263	WRITE ( io, 116 )
264	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
265	WRITE ( io, 117 )
266	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
267	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
268	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
269	ENDIF
270	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
271	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
272	ENDIF
273	ELSE
274	WRITE ( io, 118 )
275	ENDIF
276
277	WRITE ( io, 139 ) TRIM( loop_optimization )
278
279	IF ( galilei_transformation ) THEN
280	IF ( use_ug_for_galilei_tr ) THEN
281	char1 = 'geostrophic wind'
282	ELSE
283	char1 = 'mean wind in model domain'
284	ENDIF
285	IF ( simulated_time_at_begin == simulated_time ) THEN
286	char2 = 'at the start of the run'
287	ELSE
288	char2 = 'at the end of the run'
289	ENDIF
290	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
291	advected_distance_x/1000.0, advected_distance_y/1000.0
292	ENDIF
293	IF ( timestep_scheme == 'leapfrog' ) THEN
294	WRITE ( io, 120 )
295	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
296	WRITE ( io, 121 )
297	ELSE
298	WRITE ( io, 122 ) timestep_scheme
299	ENDIF
300	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
301	IF ( rayleigh_damping_factor /= 0.0 ) THEN
302	IF ( .NOT. ocean ) THEN
303	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
304	rayleigh_damping_factor
305	ELSE
306	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
307	rayleigh_damping_factor
308	ENDIF
309	ENDIF
310	IF ( humidity ) THEN
311	IF ( .NOT. cloud_physics ) THEN
312	WRITE ( io, 129 )
313	ELSE
314	WRITE ( io, 130 )
315	WRITE ( io, 131 )
316	IF ( radiation ) WRITE ( io, 132 )
317	IF ( precipitation ) WRITE ( io, 133 )
318	ENDIF
319	ENDIF
320	IF ( passive_scalar ) WRITE ( io, 134 )
321	IF ( conserve_volume_flow ) THEN
322	WRITE ( io, 150 ) conserve_volume_flow_mode
323	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
324	WRITE ( io, 151 ) u_bulk, v_bulk
325	ENDIF
326	ELSEIF ( dp_external ) THEN
327	IF ( dp_smooth ) THEN
328	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
329	ELSE
330	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
331	ENDIF
332	ENDIF
333	IF ( large_scale_subsidence ) THEN
334	WRITE ( io, 153 )
335	WRITE ( io, 154 )
336	ENDIF
337	WRITE ( io, 99 )
338
339	!
340	!-- Runtime and timestep informations
341	WRITE ( io, 200 )
342	IF ( .NOT. dt_fixed ) THEN
343	WRITE ( io, 201 ) dt_max, cfl_factor
344	ELSE
345	WRITE ( io, 202 ) dt
346	ENDIF
347	WRITE ( io, 203 ) simulated_time_at_begin, end_time
348
349	IF ( time_restart /= 9999999.9 .AND. &
350	simulated_time_at_begin == simulated_time ) THEN
351	IF ( dt_restart == 9999999.9 ) THEN
352	WRITE ( io, 204 ) ' Restart at: ',time_restart
353	ELSE
354	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
355	ENDIF
356	ENDIF
357
358	IF ( simulated_time_at_begin /= simulated_time ) THEN
359	i = MAX ( log_point_s(10)%counts, 1 )
360	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
361	cpuseconds_per_simulated_second = 0.0
362	ELSE
363	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
364	( simulated_time - &
365	simulated_time_at_begin )
366	ENDIF
367	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
368	log_point_s(10)%sum / REAL( i ), &
369	cpuseconds_per_simulated_second
370	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
371	IF ( dt_restart == 9999999.9 ) THEN
372	WRITE ( io, 204 ) ' Next restart at: ',time_restart
373	ELSE
374	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
375	ENDIF
376	ENDIF
377	ENDIF
378
379	!
380	!-- Start time for coupled runs, if independent precursor runs for atmosphere
381	!-- and ocean are used. In this case, coupling_start_time defines the time
382	!-- when the coupling is switched on.
383	IF ( coupling_start_time /= 0.0 ) THEN
384	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
385	char1 = 'Precursor run for a coupled atmosphere-ocean run'
386	ELSE
387	char1 = 'Coupled atmosphere-ocean run following independent ' // &
388	'precursor runs'
389	ENDIF
390	WRITE ( io, 207 ) char1, coupling_start_time
391	ENDIF
392
393	!
394	!-- Computational grid
395	IF ( .NOT. ocean ) THEN
396	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
397	IF ( dz_stretch_level_index < nzt+1 ) THEN
398	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
399	dz_stretch_factor, dz_max
400	ENDIF
401	ELSE
402	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
403	IF ( dz_stretch_level_index > 0 ) THEN
404	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
405	dz_stretch_factor, dz_max
406	ENDIF
407	ENDIF
408	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
409	MIN( nnz+2, nzt+2 )
410	IF ( numprocs > 1 ) THEN
411	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
412	WRITE ( io, 255 )
413	ELSE
414	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
415	ENDIF
416	ENDIF
417	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
418
419	!
420	!-- Topography
421	WRITE ( io, 270 ) topography
422	SELECT CASE ( TRIM( topography ) )
423
424	CASE ( 'flat' )
425	! no actions necessary
426
427	CASE ( 'single_building' )
428	blx = INT( building_length_x / dx )
429	bly = INT( building_length_y / dy )
430	bh = INT( building_height / dz )
431
432	IF ( building_wall_left == 9999999.9 ) THEN
433	building_wall_left = ( nx + 1 - blx ) / 2 * dx
434	ENDIF
435	bxl = INT ( building_wall_left / dx + 0.5 )
436	bxr = bxl + blx
437
438	IF ( building_wall_south == 9999999.9 ) THEN
439	building_wall_south = ( ny + 1 - bly ) / 2 * dy
440	ENDIF
441	bys = INT ( building_wall_south / dy + 0.5 )
442	byn = bys + bly
443
444	WRITE ( io, 271 ) building_length_x, building_length_y, &
445	building_height, bxl, bxr, bys, byn
446
447	CASE ( 'single_street_canyon' )
448	ch = NINT( canyon_height / dz )
449	IF ( canyon_width_x /= 9999999.9 ) THEN
450	!
451	!-- Street canyon in y direction
452	cwx = NINT( canyon_width_x / dx )
453	IF ( canyon_wall_left == 9999999.9 ) THEN
454	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
455	ENDIF
456	cxl = NINT( canyon_wall_left / dx )
457	cxr = cxl + cwx
458	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
459
460	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
461	!
462	!-- Street canyon in x direction
463	cwy = NINT( canyon_width_y / dy )
464	IF ( canyon_wall_south == 9999999.9 ) THEN
465	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
466	ENDIF
467	cys = NINT( canyon_wall_south / dy )
468	cyn = cys + cwy
469	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
470	ENDIF
471
472	END SELECT
473
474	IF ( TRIM( topography ) /= 'flat' ) THEN
475	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
476	IF ( TRIM( topography ) == 'single_building' .OR. &
477	TRIM( topography ) == 'single_street_canyon' ) THEN
478	WRITE ( io, 278 )
479	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
480	WRITE ( io, 279 )
481	ENDIF
482	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
483	WRITE ( io, 278 )
484	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
485	WRITE ( io, 279 )
486	ENDIF
487	ENDIF
488
489	IF ( plant_canopy ) THEN
490
491	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
492	IF ( passive_scalar ) THEN
493	WRITE ( io, 281 ) scalar_exchange_coefficient, &
494	leaf_surface_concentration
495	ENDIF
496
497	!
498	!-- Heat flux at the top of vegetation
499	WRITE ( io, 282 ) cthf
500
501	!
502	!-- Leaf area density profile
503	!-- Building output strings, starting with surface value
504	WRITE ( learde, '(F6.2)' ) lad_surface
505	gradients = '------'
506	slices = ' 0'
507	coordinates = ' 0.0'
508	i = 1
509	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
510
511	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
512	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
513
514	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
515	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
516
517	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
518	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
519
520	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
521	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
522
523	i = i + 1
524	ENDDO
525
526	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
527	TRIM( gradients ), TRIM( slices )
528
529	ENDIF
530
531	!
532	!-- Boundary conditions
533	IF ( ibc_p_b == 0 ) THEN
534	runten = 'p(0) = 0 \|'
535	ELSEIF ( ibc_p_b == 1 ) THEN
536	runten = 'p(0) = p(1) \|'
537	ELSE
538	runten = 'p(0) = p(1) +R\|'
539	ENDIF
540	IF ( ibc_p_t == 0 ) THEN
541	roben = 'p(nzt+1) = 0 \|'
542	ELSE
543	roben = 'p(nzt+1) = p(nzt) \|'
544	ENDIF
545
546	IF ( ibc_uv_b == 0 ) THEN
547	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
548	ELSE
549	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
550	ENDIF
551	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
552	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
553	ELSEIF ( ibc_uv_t == 0 ) THEN
554	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
555	ELSE
556	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
557	ENDIF
558
559	IF ( ibc_pt_b == 0 ) THEN
560	runten = TRIM( runten ) // ' pt(0) = pt_surface'
561	ELSEIF ( ibc_pt_b == 1 ) THEN
562	runten = TRIM( runten ) // ' pt(0) = pt(1)'
563	ELSEIF ( ibc_pt_b == 2 ) THEN
564	runten = TRIM( runten ) // ' pt(0) = from coupled model'
565	ENDIF
566	IF ( ibc_pt_t == 0 ) THEN
567	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
568	ELSEIF( ibc_pt_t == 1 ) THEN
569	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
570	ELSEIF( ibc_pt_t == 2 ) THEN
571	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
572	ENDIF
573
574	WRITE ( io, 300 ) runten, roben
575
576	IF ( .NOT. constant_diffusion ) THEN
577	IF ( ibc_e_b == 1 ) THEN
578	runten = 'e(0) = e(1)'
579	ELSE
580	runten = 'e(0) = e(1) = (u/0.1)*2'
581	ENDIF
582	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
583
584	WRITE ( io, 301 ) 'e', runten, roben
585
586	ENDIF
587
588	IF ( ocean ) THEN
589	runten = 'sa(0) = sa(1)'
590	IF ( ibc_sa_t == 0 ) THEN
591	roben = 'sa(nzt+1) = sa_surface'
592	ELSE
593	roben = 'sa(nzt+1) = sa(nzt)'
594	ENDIF
595	WRITE ( io, 301 ) 'sa', runten, roben
596	ENDIF
597
598	IF ( humidity ) THEN
599	IF ( ibc_q_b == 0 ) THEN
600	runten = 'q(0) = q_surface'
601	ELSE
602	runten = 'q(0) = q(1)'
603	ENDIF
604	IF ( ibc_q_t == 0 ) THEN
605	roben = 'q(nzt) = q_top'
606	ELSE
607	roben = 'q(nzt) = q(nzt-1) + dq/dz'
608	ENDIF
609	WRITE ( io, 301 ) 'q', runten, roben
610	ENDIF
611
612	IF ( passive_scalar ) THEN
613	IF ( ibc_q_b == 0 ) THEN
614	runten = 's(0) = s_surface'
615	ELSE
616	runten = 's(0) = s(1)'
617	ENDIF
618	IF ( ibc_q_t == 0 ) THEN
619	roben = 's(nzt) = s_top'
620	ELSE
621	roben = 's(nzt) = s(nzt-1) + ds/dz'
622	ENDIF
623	WRITE ( io, 301 ) 's', runten, roben
624	ENDIF
625
626	IF ( use_surface_fluxes ) THEN
627	WRITE ( io, 303 )
628	IF ( constant_heatflux ) THEN
629	WRITE ( io, 306 ) surface_heatflux
630	IF ( random_heatflux ) WRITE ( io, 307 )
631	ENDIF
632	IF ( humidity .AND. constant_waterflux ) THEN
633	WRITE ( io, 311 ) surface_waterflux
634	ENDIF
635	IF ( passive_scalar .AND. constant_waterflux ) THEN
636	WRITE ( io, 313 ) surface_waterflux
637	ENDIF
638	ENDIF
639
640	IF ( use_top_fluxes ) THEN
641	WRITE ( io, 304 )
642	IF ( coupling_mode == 'uncoupled' ) THEN
643	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
644	IF ( constant_top_heatflux ) THEN
645	WRITE ( io, 306 ) top_heatflux
646	ENDIF
647	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
648	WRITE ( io, 316 )
649	ENDIF
650	IF ( ocean .AND. constant_top_salinityflux ) THEN
651	WRITE ( io, 309 ) top_salinityflux
652	ENDIF
653	IF ( humidity .OR. passive_scalar ) THEN
654	WRITE ( io, 315 )
655	ENDIF
656	ENDIF
657
658	IF ( prandtl_layer ) THEN
659	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
660	rif_min, rif_max
661	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
662	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
663	WRITE ( io, 312 )
664	ENDIF
665	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
666	WRITE ( io, 314 )
667	ENDIF
668	ELSE
669	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
670	WRITE ( io, 310 ) rif_min, rif_max
671	ENDIF
672	ENDIF
673
674	WRITE ( io, 317 ) bc_lr, bc_ns
675	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
676	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
677	IF ( turbulent_inflow ) THEN
678	WRITE ( io, 319 ) recycling_width, recycling_plane, &
679	inflow_damping_height, inflow_damping_width
680	ENDIF
681	ENDIF
682
683	!
684	!-- Listing of 1D-profiles
685	WRITE ( io, 325 ) dt_dopr_listing
686	IF ( averaging_interval_pr /= 0.0 ) THEN
687	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
688	ENDIF
689
690	!
691	!-- DATA output
692	WRITE ( io, 330 )
693	IF ( averaging_interval_pr /= 0.0 ) THEN
694	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
695	ENDIF
696
697	!
698	!-- 1D-profiles
699	dopr_chr = 'Profile:'
700	IF ( dopr_n /= 0 ) THEN
701	WRITE ( io, 331 )
702
703	output_format = ''
704	IF ( netcdf_output ) THEN
705	IF ( netcdf_data_format == 1 ) THEN
706	output_format = 'NetCDF classic'
707	ELSE
708	output_format = 'NetCDF 64bit offset'
709	ENDIF
710	ENDIF
711	IF ( profil_output ) THEN
712	IF ( netcdf_output ) THEN
713	output_format = TRIM( output_format ) // ' and profil'
714	ELSE
715	output_format = 'profil'
716	ENDIF
717	ENDIF
718	WRITE ( io, 344 ) output_format
719
720	DO i = 1, dopr_n
721	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
722	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
723	WRITE ( io, 332 ) dopr_chr
724	dopr_chr = ' :'
725	ENDIF
726	ENDDO
727
728	IF ( dopr_chr /= '' ) THEN
729	WRITE ( io, 332 ) dopr_chr
730	ENDIF
731	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
732	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
733	ENDIF
734
735	!
736	!-- 2D-arrays
737	DO av = 0, 1
738
739	i = 1
740	do2d_xy = ''
741	do2d_xz = ''
742	do2d_yz = ''
743	DO WHILE ( do2d(av,i) /= ' ' )
744
745	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
746	do2d_mode = do2d(av,i)(l-1:l)
747
748	SELECT CASE ( do2d_mode )
749	CASE ( 'xy' )
750	ll = LEN_TRIM( do2d_xy )
751	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
752	CASE ( 'xz' )
753	ll = LEN_TRIM( do2d_xz )
754	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
755	CASE ( 'yz' )
756	ll = LEN_TRIM( do2d_yz )
757	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
758	END SELECT
759
760	i = i + 1
761
762	ENDDO
763
764	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
765	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
766	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
767	( netcdf_output .OR. iso2d_output ) ) THEN
768
769	IF ( av == 0 ) THEN
770	WRITE ( io, 334 ) ''
771	ELSE
772	WRITE ( io, 334 ) '(time-averaged)'
773	ENDIF
774
775	IF ( do2d_at_begin ) THEN
776	begin_chr = 'and at the start'
777	ELSE
778	begin_chr = ''
779	ENDIF
780
781	output_format = ''
782	IF ( netcdf_output ) THEN
783	IF ( netcdf_data_format == 1 ) THEN
784	output_format = 'NetCDF classic'
785	ELSEIF ( netcdf_data_format == 2 ) THEN
786	output_format = 'NetCDF 64bit offset'
787	ELSEIF ( netcdf_data_format == 3 ) THEN
788	output_format = 'NetCDF4/HDF5'
789	ELSEIF ( netcdf_data_format == 4 ) THEN
790	output_format = 'NetCDF4/HDF5 clasic'
791	ENDIF
792	ENDIF
793	IF ( iso2d_output ) THEN
794	IF ( netcdf_output ) THEN
795	output_format = TRIM( output_format ) // ' and iso2d'
796	ELSE
797	output_format = 'iso2d'
798	ENDIF
799	ENDIF
800	WRITE ( io, 344 ) output_format
801
802	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
803	i = 1
804	slices = '/'
805	coordinates = '/'
806	!
807	!-- Building strings with index and coordinate informations of the
808	!-- slices
809	DO WHILE ( section(i,1) /= -9999 )
810
811	WRITE (section_chr,'(I5)') section(i,1)
812	section_chr = ADJUSTL( section_chr )
813	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
814
815	IF ( section(i,1) == -1 ) THEN
816	WRITE (coor_chr,'(F10.1)') -1.0
817	ELSE
818	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
819	ENDIF
820	coor_chr = ADJUSTL( coor_chr )
821	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
822
823	i = i + 1
824	ENDDO
825	IF ( av == 0 ) THEN
826	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
827	TRIM( begin_chr ), 'k', TRIM( slices ), &
828	TRIM( coordinates )
829	IF ( skip_time_do2d_xy /= 0.0 ) THEN
830	WRITE ( io, 339 ) skip_time_do2d_xy
831	ENDIF
832	ELSE
833	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
834	TRIM( begin_chr ), averaging_interval, &
835	dt_averaging_input, 'k', TRIM( slices ), &
836	TRIM( coordinates )
837	IF ( skip_time_data_output_av /= 0.0 ) THEN
838	WRITE ( io, 339 ) skip_time_data_output_av
839	ENDIF
840	ENDIF
841
842	ENDIF
843
844	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
845	i = 1
846	slices = '/'
847	coordinates = '/'
848	!
849	!-- Building strings with index and coordinate informations of the
850	!-- slices
851	DO WHILE ( section(i,2) /= -9999 )
852
853	WRITE (section_chr,'(I5)') section(i,2)
854	section_chr = ADJUSTL( section_chr )
855	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
856
857	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
858	coor_chr = ADJUSTL( coor_chr )
859	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
860
861	i = i + 1
862	ENDDO
863	IF ( av == 0 ) THEN
864	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
865	TRIM( begin_chr ), 'j', TRIM( slices ), &
866	TRIM( coordinates )
867	IF ( skip_time_do2d_xz /= 0.0 ) THEN
868	WRITE ( io, 339 ) skip_time_do2d_xz
869	ENDIF
870	ELSE
871	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
872	TRIM( begin_chr ), averaging_interval, &
873	dt_averaging_input, 'j', TRIM( slices ), &
874	TRIM( coordinates )
875	IF ( skip_time_data_output_av /= 0.0 ) THEN
876	WRITE ( io, 339 ) skip_time_data_output_av
877	ENDIF
878	ENDIF
879	ENDIF
880
881	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
882	i = 1
883	slices = '/'
884	coordinates = '/'
885	!
886	!-- Building strings with index and coordinate informations of the
887	!-- slices
888	DO WHILE ( section(i,3) /= -9999 )
889
890	WRITE (section_chr,'(I5)') section(i,3)
891	section_chr = ADJUSTL( section_chr )
892	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
893
894	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
895	coor_chr = ADJUSTL( coor_chr )
896	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
897
898	i = i + 1
899	ENDDO
900	IF ( av == 0 ) THEN
901	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
902	TRIM( begin_chr ), 'i', TRIM( slices ), &
903	TRIM( coordinates )
904	IF ( skip_time_do2d_yz /= 0.0 ) THEN
905	WRITE ( io, 339 ) skip_time_do2d_yz
906	ENDIF
907	ELSE
908	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
909	TRIM( begin_chr ), averaging_interval, &
910	dt_averaging_input, 'i', TRIM( slices ), &
911	TRIM( coordinates )
912	IF ( skip_time_data_output_av /= 0.0 ) THEN
913	WRITE ( io, 339 ) skip_time_data_output_av
914	ENDIF
915	ENDIF
916	ENDIF
917
918	ENDIF
919
920	ENDDO
921
922	!
923	!-- 3d-arrays
924	DO av = 0, 1
925
926	i = 1
927	do3d_chr = ''
928	DO WHILE ( do3d(av,i) /= ' ' )
929
930	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
931	i = i + 1
932
933	ENDDO
934
935	IF ( do3d_chr /= '' ) THEN
936	IF ( av == 0 ) THEN
937	WRITE ( io, 336 ) ''
938	ELSE
939	WRITE ( io, 336 ) '(time-averaged)'
940	ENDIF
941
942	output_format = ''
943	IF ( netcdf_output ) THEN
944	IF ( netcdf_data_format == 1 ) THEN
945	output_format = 'NetCDF classic'
946	ELSEIF ( netcdf_data_format == 2 ) THEN
947	output_format = 'NetCDF 64bit offset'
948	ELSEIF ( netcdf_data_format == 3 ) THEN
949	output_format = 'NetCDF4/HDF5'
950	ELSEIF ( netcdf_data_format == 4 ) THEN
951	output_format = 'NetCDF4/HDF5 clasic'
952	ENDIF
953	ENDIF
954	IF ( avs_output ) THEN
955	IF ( netcdf_output ) THEN
956	output_format = TRIM( output_format ) // ' and avs'
957	ELSE
958	output_format = 'avs'
959	ENDIF
960	ENDIF
961	WRITE ( io, 344 ) output_format
962
963	IF ( do3d_at_begin ) THEN
964	begin_chr = 'and at the start'
965	ELSE
966	begin_chr = ''
967	ENDIF
968	IF ( av == 0 ) THEN
969	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
970	zu(nz_do3d), nz_do3d
971	ELSE
972	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
973	TRIM( begin_chr ), averaging_interval, &
974	dt_averaging_input, zu(nz_do3d), nz_do3d
975	ENDIF
976
977	IF ( do3d_compress ) THEN
978	do3d_chr = ''
979	i = 1
980	DO WHILE ( do3d(av,i) /= ' ' )
981
982	SELECT CASE ( do3d(av,i) )
983	CASE ( 'u' )
984	j = 1
985	CASE ( 'v' )
986	j = 2
987	CASE ( 'w' )
988	j = 3
989	CASE ( 'p' )
990	j = 4
991	CASE ( 'pt' )
992	j = 5
993	END SELECT
994	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
995	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
996	':' // prec // ','
997	i = i + 1
998
999	ENDDO
1000	WRITE ( io, 338 ) do3d_chr
1001
1002	ENDIF
1003
1004	IF ( av == 0 ) THEN
1005	IF ( skip_time_do3d /= 0.0 ) THEN
1006	WRITE ( io, 339 ) skip_time_do3d
1007	ENDIF
1008	ELSE
1009	IF ( skip_time_data_output_av /= 0.0 ) THEN
1010	WRITE ( io, 339 ) skip_time_data_output_av
1011	ENDIF
1012	ENDIF
1013
1014	ENDIF
1015
1016	ENDDO
1017
1018	!
1019	!-- masked arrays
1020	IF ( masks > 0 ) WRITE ( io, 345 ) &
1021	mask_scale_x, mask_scale_y, mask_scale_z
1022	DO mid = 1, masks
1023	DO av = 0, 1
1024
1025	i = 1
1026	domask_chr = ''
1027	DO WHILE ( domask(mid,av,i) /= ' ' )
1028	domask_chr = TRIM( domask_chr ) // ' ' // &
1029	TRIM( domask(mid,av,i) ) // ','
1030	i = i + 1
1031	ENDDO
1032
1033	IF ( domask_chr /= '' ) THEN
1034	IF ( av == 0 ) THEN
1035	WRITE ( io, 346 ) '', mid
1036	ELSE
1037	WRITE ( io, 346 ) ' (time-averaged)', mid
1038	ENDIF
1039
1040	output_format = ''
1041	IF ( netcdf_output ) THEN
1042	IF ( netcdf_data_format == 1 ) THEN
1043	output_format = 'NetCDF classic'
1044	ELSEIF ( netcdf_data_format == 2 ) THEN
1045	output_format = 'NetCDF 64bit offset'
1046	ELSEIF ( netcdf_data_format == 3 ) THEN
1047	output_format = 'NetCDF4/HDF5'
1048	ELSEIF ( netcdf_data_format == 4 ) THEN
1049	output_format = 'NetCDF4/HDF5 clasic'
1050	ENDIF
1051	ENDIF
1052	WRITE ( io, 344 ) output_format
1053
1054	IF ( av == 0 ) THEN
1055	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1056	ELSE
1057	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1058	averaging_interval, dt_averaging_input
1059	ENDIF
1060
1061	IF ( av == 0 ) THEN
1062	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1063	WRITE ( io, 339 ) skip_time_domask(mid)
1064	ENDIF
1065	ELSE
1066	IF ( skip_time_data_output_av /= 0.0 ) THEN
1067	WRITE ( io, 339 ) skip_time_data_output_av
1068	ENDIF
1069	ENDIF
1070	!
1071	!-- output locations
1072	DO dim = 1, 3
1073	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1074	count = 0
1075	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1076	count = count + 1
1077	ENDDO
1078	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1079	mask(mid,dim,:count)
1080	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1081	mask_loop(mid,dim,2) < 0.0 .AND. &
1082	mask_loop(mid,dim,3) == 0.0 ) THEN
1083	WRITE ( io, 350 ) dir(dim), dir(dim)
1084	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1085	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1086	mask_loop(mid,dim,1:2)
1087	ELSE
1088	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1089	mask_loop(mid,dim,1:3)
1090	ENDIF
1091	ENDDO
1092	ENDIF
1093
1094	ENDDO
1095	ENDDO
1096
1097	!
1098	!-- Timeseries
1099	IF ( dt_dots /= 9999999.9 ) THEN
1100	WRITE ( io, 340 )
1101
1102	output_format = ''
1103	IF ( netcdf_output ) THEN
1104	IF ( netcdf_data_format == 1 ) THEN
1105	output_format = 'NetCDF classic'
1106	ELSE
1107	output_format = 'NetCDF 64bit offset'
1108	ENDIF
1109	ENDIF
1110	IF ( profil_output ) THEN
1111	IF ( netcdf_output ) THEN
1112	output_format = TRIM( output_format ) // ' and profil'
1113	ELSE
1114	output_format = 'profil'
1115	ENDIF
1116	ENDIF
1117	WRITE ( io, 344 ) output_format
1118	WRITE ( io, 341 ) dt_dots
1119	ENDIF
1120
1121	#if defined( __dvrp_graphics )
1122	!
1123	!-- Dvrp-output
1124	IF ( dt_dvrp /= 9999999.9 ) THEN
1125	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1126	TRIM( dvrp_username ), TRIM( dvrp_directory )
1127	i = 1
1128	l = 0
1129	m = 0
1130	DO WHILE ( mode_dvrp(i) /= ' ' )
1131	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1132	READ ( mode_dvrp(i), '(10X,I2)' ) j
1133	l = l + 1
1134	IF ( do3d(0,j) /= ' ' ) THEN
1135	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1136	isosurface_color(:,l)
1137	ENDIF
1138	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1139	READ ( mode_dvrp(i), '(6X,I2)' ) j
1140	m = m + 1
1141	IF ( do2d(0,j) /= ' ' ) THEN
1142	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1143	slicer_range_limits_dvrp(:,m)
1144	ENDIF
1145	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1146	WRITE ( io, 363 ) dvrp_psize
1147	IF ( particle_dvrpsize /= 'none' ) THEN
1148	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1149	dvrpsize_interval
1150	ENDIF
1151	IF ( particle_color /= 'none' ) THEN
1152	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1153	color_interval
1154	ENDIF
1155	ENDIF
1156	i = i + 1
1157	ENDDO
1158
1159	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1160	superelevation_y, superelevation, clip_dvrp_l, &
1161	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1162
1163	IF ( TRIM( topography ) /= 'flat' ) THEN
1164	WRITE ( io, 366 ) topography_color
1165	IF ( cluster_size > 1 ) THEN
1166	WRITE ( io, 367 ) cluster_size
1167	ENDIF
1168	ENDIF
1169
1170	ENDIF
1171	#endif
1172
1173	#if defined( __spectra )
1174	!
1175	!-- Spectra output
1176	IF ( dt_dosp /= 9999999.9 ) THEN
1177	WRITE ( io, 370 )
1178
1179	output_format = ''
1180	IF ( netcdf_output ) THEN
1181	IF ( netcdf_data_format == 1 ) THEN
1182	output_format = 'NetCDF classic'
1183	ELSE
1184	output_format = 'NetCDF 64bit offset'
1185	ENDIF
1186	ENDIF
1187	IF ( profil_output ) THEN
1188	IF ( netcdf_output ) THEN
1189	output_format = TRIM( output_format ) // ' and profil'
1190	ELSE
1191	output_format = 'profil'
1192	ENDIF
1193	ENDIF
1194	WRITE ( io, 344 ) output_format
1195	WRITE ( io, 371 ) dt_dosp
1196	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1197	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1198	( spectra_direction(i), i = 1,10 ), &
1199	( comp_spectra_level(i), i = 1,100 ), &
1200	( plot_spectra_level(i), i = 1,100 ), &
1201	averaging_interval_sp, dt_averaging_input_pr
1202	ENDIF
1203	#endif
1204
1205	WRITE ( io, 99 )
1206
1207	!
1208	!-- Physical quantities
1209	WRITE ( io, 400 )
1210
1211	!
1212	!-- Geostrophic parameters
1213	WRITE ( io, 410 ) omega, phi, f, fs
1214
1215	!
1216	!-- Other quantities
1217	WRITE ( io, 411 ) g
1218	IF ( use_reference ) THEN
1219	IF ( ocean ) THEN
1220	WRITE ( io, 412 ) prho_reference
1221	ELSE
1222	WRITE ( io, 413 ) pt_reference
1223	ENDIF
1224	ENDIF
1225
1226	!
1227	!-- Cloud physics parameters
1228	IF ( cloud_physics ) THEN
1229	WRITE ( io, 415 )
1230	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1231	ENDIF
1232
1233	!-- Profile of the geostrophic wind (component ug)
1234	!-- Building output strings
1235	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1236	gradients = '------'
1237	slices = ' 0'
1238	coordinates = ' 0.0'
1239	i = 1
1240	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1241
1242	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1243	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1244
1245	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1246	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1247
1248	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1249	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1250
1251	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1252	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1253
1254	IF ( i == 10 ) THEN
1255	EXIT
1256	ELSE
1257	i = i + 1
1258	ENDIF
1259
1260	ENDDO
1261
1262	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1263	TRIM( gradients ), TRIM( slices )
1264
1265	!-- Profile of the geostrophic wind (component vg)
1266	!-- Building output strings
1267	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1268	gradients = '------'
1269	slices = ' 0'
1270	coordinates = ' 0.0'
1271	i = 1
1272	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1273
1274	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1275	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1276
1277	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1279
1280	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1282
1283	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1285
1286	IF ( i == 10 ) THEN
1287	EXIT
1288	ELSE
1289	i = i + 1
1290	ENDIF
1291
1292	ENDDO
1293
1294	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1295	TRIM( gradients ), TRIM( slices )
1296
1297	!
1298	!-- Initial temperature profile
1299	!-- Building output strings, starting with surface temperature
1300	WRITE ( temperatures, '(F6.2)' ) pt_surface
1301	gradients = '------'
1302	slices = ' 0'
1303	coordinates = ' 0.0'
1304	i = 1
1305	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1306
1307	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1308	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1309
1310	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1311	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1312
1313	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1314	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1315
1316	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1317	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1318
1319	IF ( i == 10 ) THEN
1320	EXIT
1321	ELSE
1322	i = i + 1
1323	ENDIF
1324
1325	ENDDO
1326
1327	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1328	TRIM( gradients ), TRIM( slices )
1329
1330	!
1331	!-- Initial humidity profile
1332	!-- Building output strings, starting with surface humidity
1333	IF ( humidity .OR. passive_scalar ) THEN
1334	WRITE ( temperatures, '(E8.1)' ) q_surface
1335	gradients = '--------'
1336	slices = ' 0'
1337	coordinates = ' 0.0'
1338	i = 1
1339	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1340
1341	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1342	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1343
1344	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1345	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1346
1347	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1348	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1349
1350	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1351	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1352
1353	IF ( i == 10 ) THEN
1354	EXIT
1355	ELSE
1356	i = i + 1
1357	ENDIF
1358
1359	ENDDO
1360
1361	IF ( humidity ) THEN
1362	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1363	TRIM( gradients ), TRIM( slices )
1364	ELSE
1365	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1366	TRIM( gradients ), TRIM( slices )
1367	ENDIF
1368	ENDIF
1369
1370	!
1371	!-- Initial salinity profile
1372	!-- Building output strings, starting with surface salinity
1373	IF ( ocean ) THEN
1374	WRITE ( temperatures, '(F6.2)' ) sa_surface
1375	gradients = '------'
1376	slices = ' 0'
1377	coordinates = ' 0.0'
1378	i = 1
1379	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1380
1381	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1382	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1383
1384	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1385	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1386
1387	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1388	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1389
1390	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1391	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1392
1393	IF ( i == 10 ) THEN
1394	EXIT
1395	ELSE
1396	i = i + 1
1397	ENDIF
1398
1399	ENDDO
1400
1401	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1402	TRIM( gradients ), TRIM( slices )
1403	ENDIF
1404
1405	!
1406	!-- Profile for the large scale vertial velocity
1407	!-- Building output strings, starting with surface value
1408	IF ( large_scale_subsidence ) THEN
1409	temperatures = ' 0.0'
1410	gradients = '------'
1411	slices = ' 0'
1412	coordinates = ' 0.0'
1413	i = 1
1414	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
1415
1416	WRITE (coor_chr,'(E10.2,7X)') &
1417	w_subs(ws_vertical_gradient_level_ind(i))
1418	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1419
1420	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
1421	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1422
1423	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
1424	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1425
1426	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
1427	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1428
1429	IF ( i == 10 ) THEN
1430	EXIT
1431	ELSE
1432	i = i + 1
1433	ENDIF
1434
1435	ENDDO
1436
1437	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1438	TRIM( gradients ), TRIM( slices )
1439	ENDIF
1440
1441	!
1442	!-- LES / turbulence parameters
1443	WRITE ( io, 450 )
1444
1445	!--
1446	! ... LES-constants used must still be added here
1447	!--
1448	IF ( constant_diffusion ) THEN
1449	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1450	prandtl_number
1451	ENDIF
1452	IF ( .NOT. constant_diffusion) THEN
1453	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1454	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1455	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1456	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1457	ENDIF
1458
1459	!
1460	!-- Special actions during the run
1461	WRITE ( io, 470 )
1462	IF ( create_disturbances ) THEN
1463	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1464	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1465	zu(disturbance_level_ind_t), disturbance_level_ind_t
1466	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1467	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1468	ELSE
1469	WRITE ( io, 473 ) disturbance_energy_limit
1470	ENDIF
1471	WRITE ( io, 474 ) TRIM( random_generator )
1472	ENDIF
1473	IF ( pt_surface_initial_change /= 0.0 ) THEN
1474	WRITE ( io, 475 ) pt_surface_initial_change
1475	ENDIF
1476	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1477	WRITE ( io, 476 ) q_surface_initial_change
1478	ENDIF
1479	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1480	WRITE ( io, 477 ) q_surface_initial_change
1481	ENDIF
1482
1483	IF ( particle_advection ) THEN
1484	!
1485	!-- Particle attributes
1486	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1487	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1488	end_time_prel, dt_sort_particles
1489	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1490	IF ( random_start_position ) WRITE ( io, 481 )
1491	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1492	WRITE ( io, 495 ) total_number_of_particles
1493	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1494	WRITE ( io, 483 ) maximum_number_of_tailpoints
1495	IF ( minimum_tailpoint_distance /= 0 ) THEN
1496	WRITE ( io, 484 ) total_number_of_tails, &
1497	minimum_tailpoint_distance, &
1498	maximum_tailpoint_age
1499	ENDIF
1500	ENDIF
1501	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1502	WRITE ( io, 485 ) dt_write_particle_data
1503	output_format = ''
1504	IF ( netcdf_output ) THEN
1505	IF ( netcdf_data_format > 1 ) THEN
1506	output_format = 'netcdf (64 bit offset) and binary'
1507	ELSE
1508	output_format = 'netcdf and binary'
1509	ENDIF
1510	ELSE
1511	output_format = 'binary'
1512	ENDIF
1513	WRITE ( io, 344 ) output_format
1514	ENDIF
1515	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1516	IF ( write_particle_statistics ) WRITE ( io, 486 )
1517
1518	WRITE ( io, 487 ) number_of_particle_groups
1519
1520	DO i = 1, number_of_particle_groups
1521	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1522	WRITE ( io, 490 ) i, 0.0
1523	WRITE ( io, 492 )
1524	ELSE
1525	WRITE ( io, 490 ) i, radius(i)
1526	IF ( density_ratio(i) /= 0.0 ) THEN
1527	WRITE ( io, 491 ) density_ratio(i)
1528	ELSE
1529	WRITE ( io, 492 )
1530	ENDIF
1531	ENDIF
1532	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1533	pdx(i), pdy(i), pdz(i)
1534	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1535	ENDDO
1536
1537	ENDIF
1538
1539
1540	!
1541	!-- Parameters of 1D-model
1542	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1543	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1544	mixing_length_1d, dissipation_1d
1545	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1546	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1547	ENDIF
1548	ENDIF
1549
1550	!
1551	!-- User-defined informations
1552	CALL user_header( io )
1553
1554	WRITE ( io, 99 )
1555
1556	!
1557	!-- Write buffer contents to disc immediately
1558	CALL local_flush( io )
1559
1560	!
1561	!-- Here the FORMATs start
1562
1563	99 FORMAT (1X,78('-'))
1564	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1565	1X,'* ',A,' *',9X,A/ &
1566	1X,'***************************',9X,42('-'))
1567	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1568	37X,42('-'))
1569	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1570	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1571	' Run on host: ',A10)
1572	#if defined( __parallel )
1573	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1574	')',1X,A)
1575	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1576	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1577	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1578	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1579	37X,'because the job is running on an SMP-cluster')
1580	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1581	#endif
1582	110 FORMAT (/' Numerical Schemes:'/ &
1583	' -----------------'/)
1584	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1585	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1586	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1587	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1588	' or Upstream')
1589	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1590	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1591	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1592	' or Upstream')
1593	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1594	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1595	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1596	' Translation velocity = ',A/ &
1597	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1598	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1599	' of timestep changes)')
1600	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1601	' timestep changes')
1602	122 FORMAT (' --> Time differencing scheme: ',A)
1603	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1604	' maximum damping coefficient: ',F5.3, ' 1/s')
1605	124 FORMAT (' Spline-overshoots are being suppressed')
1606	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1607	' of'/ &
1608	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1609	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1610	' of'/ &
1611	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1612	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1613	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1614	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1615	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1616	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1617	130 FORMAT (' --> Additional prognostic equation for the total water content')
1618	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1619	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1620	' effective emissivity scheme')
1621	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1622	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1623	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1624	A,'-cycle)'/ &
1625	' number of grid levels: ',I2/ &
1626	' Gauss-Seidel red/black iterations: ',I2)
1627	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1628	I3,')')
1629	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1630	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1631	I3,')'/ &
1632	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1633	I3,')')
1634	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1635	139 FORMAT (' --> Loop optimization method: ',A)
1636	140 FORMAT (' maximum residual allowed: ',E10.3)
1637	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1638	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1639	'step')
1640	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1641	'kinetic energy')
1642	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1643	'conserved'/ &
1644	' using the ',A,' mode')
1645	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1646	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1647	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1648	/' starting from dp_level_b =', F8.3, 'm', A /)
1649	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1650	'prognostic equation for')
1651	154 FORMAT (' the potential temperature')
1652	200 FORMAT (//' Run time and time step information:'/ &
1653	' ----------------------------------'/)
1654	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1655	' CFL-factor: ',F4.2)
1656	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1657	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1658	' End time: ',F9.3,' s')
1659	204 FORMAT ( A,F9.3,' s')
1660	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1661	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1662	' CPU-time used: ',F9.3,' s per timestep: ', &
1663	' ',F9.3,' s'/ &
1664	' per second of simulated tim', &
1665	'e: ',F9.3,' s')
1666	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1667	250 FORMAT (//' Computational grid and domain size:'/ &
1668	' ----------------------------------'// &
1669	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1670	' m dz = ',F7.3,' m'/ &
1671	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1672	' m z(u) = ',F10.3,' m'/)
1673	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1674	' factor: ',F5.3/ &
1675	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1676	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1677	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1678	255 FORMAT (' Subdomains have equal size')
1679	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1680	'have smaller sizes'/ &
1681	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1682	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1683	' degrees')
1684	270 FORMAT (//' Topography informations:'/ &
1685	' -----------------------'// &
1686	1X,'Topography: ',A)
1687	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1688	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1689	' / ',I4)
1690	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1691	' direction' / &
1692	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1693	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1694	278 FORMAT (' Topography grid definition convention:'/ &
1695	' cell edge (staggered grid points'/ &
1696	' (u in x-direction, v in y-direction))' /)
1697	279 FORMAT (' Topography grid definition convention:'/ &
1698	' cell center (scalar grid points)' /)
1699	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1700	' ------------------------------'// &
1701	' Canopy mode: ', A / &
1702	' Canopy top: ',I4 / &
1703	' Leaf drag coefficient: ',F6.2 /)
1704	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1705	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1706	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1707	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1708	' Height: ',A,' m'/ &
1709	' Leaf area density: ',A,' m2/m3'/ &
1710	' Gradient: ',A,' m2/m4'/ &
1711	' Gridpoint: ',A)
1712
1713	300 FORMAT (//' Boundary conditions:'/ &
1714	' -------------------'// &
1715	' p uv ', &
1716	' pt'// &
1717	' B. bound.: ',A/ &
1718	' T. bound.: ',A)
1719	301 FORMAT (/' ',A// &
1720	' B. bound.: ',A/ &
1721	' T. bound.: ',A)
1722	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1723	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1724	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1725	'computational u,v-level:'// &
1726	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1727	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1728	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1729	307 FORMAT (' Heatflux has a random normal distribution')
1730	308 FORMAT (' Predefined surface temperature')
1731	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1732	310 FORMAT (//' 1D-Model:'// &
1733	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1734	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1735	312 FORMAT (' Predefined surface humidity')
1736	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1737	314 FORMAT (' Predefined scalar value at the surface')
1738	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1739	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1740	'atmosphere model')
1741	317 FORMAT (//' Lateral boundaries:'/ &
1742	' left/right: ',A/ &
1743	' north/south: ',A)
1744	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1745	'max =',F5.1,' m**2/s')
1746	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1747	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1748	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1749	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1750	' v: ',F9.6,' m2/s2')
1751	325 FORMAT (//' List output:'/ &
1752	' -----------'// &
1753	' 1D-Profiles:'/ &
1754	' Output every ',F8.2,' s')
1755	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1756	' Averaging input every ',F8.2,' s')
1757	330 FORMAT (//' Data output:'/ &
1758	' -----------'/)
1759	331 FORMAT (/' 1D-Profiles:')
1760	332 FORMAT (/' ',A)
1761	333 FORMAT (' Output every ',F8.2,' s',/ &
1762	' Time averaged over ',F8.2,' s'/ &
1763	' Averaging input every ',F8.2,' s')
1764	334 FORMAT (/' 2D-Arrays',A,':')
1765	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1766	' Output every ',F8.2,' s ',A/ &
1767	' Cross sections at ',A1,' = ',A/ &
1768	' scalar-coordinates: ',A,' m'/)
1769	336 FORMAT (/' 3D-Arrays',A,':')
1770	337 FORMAT (/' Arrays: ',A/ &
1771	' Output every ',F8.2,' s ',A/ &
1772	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1773	338 FORMAT (' Compressed data output'/ &
1774	' Decimal precision: ',A/)
1775	339 FORMAT (' No output during initial ',F8.2,' s')
1776	340 FORMAT (/' Time series:')
1777	341 FORMAT (' Output every ',F8.2,' s'/)
1778	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1779	' Output every ',F8.2,' s ',A/ &
1780	' Time averaged over ',F8.2,' s'/ &
1781	' Averaging input every ',F8.2,' s'/ &
1782	' Cross sections at ',A1,' = ',A/ &
1783	' scalar-coordinates: ',A,' m'/)
1784	343 FORMAT (/' Arrays: ',A/ &
1785	' Output every ',F8.2,' s ',A/ &
1786	' Time averaged over ',F8.2,' s'/ &
1787	' Averaging input every ',F8.2,' s'/ &
1788	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1789	344 FORMAT (' Output format: ',A/)
1790	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1791	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1792	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1793	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1794	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1795	347 FORMAT (' Variables: ',A/ &
1796	' Output every ',F8.2,' s')
1797	348 FORMAT (' Variables: ',A/ &
1798	' Output every ',F8.2,' s'/ &
1799	' Time averaged over ',F8.2,' s'/ &
1800	' Averaging input every ',F8.2,' s')
1801	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1802	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1803	13(' ',8(F8.2,',')/) )
1804	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1805	'all gridpoints along ',A,'-direction (default).' )
1806	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1807	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1808	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1809	#if defined( __dvrp_graphics )
1810	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1811	' Output every ',F7.1,' s'/ &
1812	' Output mode: ',A/ &
1813	' Host / User: ',A,' / ',A/ &
1814	' Directory: ',A// &
1815	' The sequence contains:')
1816	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1817	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1818	362 FORMAT (/' Slicer plane ',A/ &
1819	' Slicer limits: [',F6.2,',',F6.2,']')
1820	363 FORMAT (/' Particles'/ &
1821	' particle size: ',F7.2,' m')
1822	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1823	F6.2,',',F6.2,']')
1824	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1825	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1826	')'/ &
1827	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1828	' from y = ',F9.1,' m to y = ',F9.1,' m')
1829	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1830	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1831	#endif
1832	#if defined( __spectra )
1833	370 FORMAT (' Spectra:')
1834	371 FORMAT (' Output every ',F7.1,' s'/)
1835	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1836	' Directions: ', 10(A5,',')/ &
1837	' height levels k = ', 20(I3,',')/ &
1838	' ', 20(I3,',')/ &
1839	' ', 20(I3,',')/ &
1840	' ', 20(I3,',')/ &
1841	' ', 19(I3,','),I3,'.'/ &
1842	' height levels selected for standard plot:'/ &
1843	' k = ', 20(I3,',')/ &
1844	' ', 20(I3,',')/ &
1845	' ', 20(I3,',')/ &
1846	' ', 20(I3,',')/ &
1847	' ', 19(I3,','),I3,'.'/ &
1848	' Time averaged over ', F7.1, ' s,' / &
1849	' Profiles for the time averaging are taken every ', &
1850	F6.1,' s')
1851	#endif
1852	400 FORMAT (//' Physical quantities:'/ &
1853	' -------------------'/)
1854	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1855	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1856	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1857	' f* = ',F9.6,' 1/s')
1858	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1859	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1860	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1861	415 FORMAT (/' Cloud physics parameters:'/ &
1862	' ------------------------'/)
1863	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1864	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1865	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1866	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1867	' Vapourization heat : L_v = ',E8.2,' J/kg')
1868	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1869	' Height: ',A,' m'/ &
1870	' Temperature: ',A,' K'/ &
1871	' Gradient: ',A,' K/100m'/ &
1872	' Gridpoint: ',A)
1873	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1874	' Height: ',A,' m'/ &
1875	' Humidity: ',A,' kg/kg'/ &
1876	' Gradient: ',A,' (kg/kg)/100m'/ &
1877	' Gridpoint: ',A)
1878	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1879	' Height: ',A,' m'/ &
1880	' Scalar concentration: ',A,' kg/m**3'/ &
1881	' Gradient: ',A,' (kg/m**3)/100m'/ &
1882	' Gridpoint: ',A)
1883	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1884	' Height: ',A,' m'/ &
1885	' ug: ',A,' m/s'/ &
1886	' Gradient: ',A,' 1/100s'/ &
1887	' Gridpoint: ',A)
1888	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1889	' Height: ',A,' m'/ &
1890	' vg: ',A,' m/s'/ &
1891	' Gradient: ',A,' 1/100s'/ &
1892	' Gridpoint: ',A)
1893	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1894	' Height: ',A,' m'/ &
1895	' Salinity: ',A,' psu'/ &
1896	' Gradient: ',A,' psu/100m'/ &
1897	' Gridpoint: ',A)
1898	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1899	' Height: ',A,' m'/ &
1900	' w_subs: ',A,' m/s'/ &
1901	' Gradient: ',A,' (m/s)/100m'/ &
1902	' Gridpoint: ',A)
1903	450 FORMAT (//' LES / Turbulence quantities:'/ &
1904	' ---------------------------'/)
1905	451 FORMAT (' Diffusion coefficients are constant:'/ &
1906	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1907	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1908	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1909	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1910	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1911	470 FORMAT (//' Actions during the simulation:'/ &
1912	' -----------------------------'/)
1913	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1914	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1915	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1916	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1917	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1918	' to i/j =',I4)
1919	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1920	1X,F5.3, ' m2/s2')
1921	474 FORMAT (' Random number generator used : ',A/)
1922	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1923	'respectively, if'/ &
1924	' the value is negative) by ',F5.2,' K at the beginning of the',&
1925	' 3D-simulation'/)
1926	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1927	'respectively, if the'/ &
1928	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1929	' the 3D-simulation'/)
1930	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1931	'respectively, if the'/ &
1932	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1933	' the 3D-simulation'/)
1934	480 FORMAT (' Particles:'/ &
1935	' ---------'// &
1936	' Particle advection is active (switched on at t = ', F7.1, &
1937	' s)'/ &
1938	' Start of new particle generations every ',F6.1,' s'/ &
1939	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1940	' bottom: ', A, ' top: ', A/&
1941	' Maximum particle age: ',F9.1,' s'/ &
1942	' Advection stopped at t = ',F9.1,' s'/ &
1943	' Particles are sorted every ',F9.1,' s'/)
1944	481 FORMAT (' Particles have random start positions'/)
1945	482 FORMAT (' Particles are advected only horizontally'/)
1946	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1947	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1948	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1949	' Maximum age of the end of the tail: ',F8.2,' s')
1950	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1951	486 FORMAT (' Particle statistics are written on file'/)
1952	487 FORMAT (' Number of particle groups: ',I2/)
1953	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1954	' minimum timestep for advection: ', F7.5/)
1955	489 FORMAT (' Number of particles simultaneously released at each ', &
1956	'point: ', I5/)
1957	490 FORMAT (' Particle group ',I2,':'/ &
1958	' Particle radius: ',E10.3, 'm')
1959	491 FORMAT (' Particle inertia is activated'/ &
1960	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1961	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1962	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1963	' y:',F8.1,' - ',F8.1,' m'/&
1964	' z:',F8.1,' - ',F8.1,' m'/&
1965	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1966	' m dz = ',F8.1,' m'/)
1967	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1968	F8.2,' s'/)
1969	495 FORMAT (' Number of particles in total domain: ',I10/)
1970	500 FORMAT (//' 1D-Model parameters:'/ &
1971	' -------------------'// &
1972	' Simulation time: ',F8.1,' s'/ &
1973	' Run-controll output every: ',F8.1,' s'/ &
1974	' Vertical profile output every: ',F8.1,' s'/ &
1975	' Mixing length calculation: ',A/ &
1976	' Dissipation calculation: ',A/)
1977	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1978
1979
1980	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |